EUR-Lex Der Zugang zum EU-Recht
Dieses Dokument ist ein Auszug aus dem EUR-Lex-Portal.
Dokument 32019R0999
Council Regulation (EU) 2019/999 of 13 June 2019 amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products
Council Regulation (EU) 2019/999 of 13 June 2019 amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products
Council Regulation (EU) 2019/999 of 13 June 2019 amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products
ST/9340/2019/INIT
OJ L 163, 20.6.2019, S. 27–55
(BG, ES, CS, DA, DE, ET, EL, EN, FR, HR, IT, LV, LT, HU, MT, NL, PL, PT, RO, SK, SL, FI, SV)
Nicht mehr in Kraft, Datum des Endes der Gültigkeit: 31/12/2021; Implicitly repealed by 32021R2278
|
20.6.2019 |
EN |
Official Journal of the European Union |
L 163/27 |
COUNCIL REGULATION (EU) 2019/999
of 13 June 2019
amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products
THE COUNCIL OF THE EUROPEAN UNION,
Having regard to the Treaty on the Functioning of the European Union, and in particular Article 31 thereof,
Having regard to the proposal from the European Commission,
Whereas:
|
(1) |
In order to ensure a sufficient and uninterrupted supply of certain agricultural and industrial products which are unavailable in the Union and thereby avoid any disturbances on the market for those products, autonomous Common Customs Tariff (‘CCT’) duties on those products have been suspended by Council Regulation (EU) No 1387/2013 (1). Those products can be imported into the Union at reduced or zero duty rates. |
|
(2) |
The Union production of 97 products that are not listed in the Annex to Regulation (EU) No 1387/2013 is inadequate or non-existent. It is therefore in the interest of the Union to suspend totally the autonomous CCT duties on those products. |
|
(3) |
It is necessary to modify the conditions for the suspension of autonomous CCT duties for 47 products listed in the Annex to Regulation (EU) No 1387/2013 in order to take into account technical product developments and economic trends on the market. |
|
(4) |
It is no longer in the interest of the Union to maintain the suspension of autonomous CCT duties for 26 of the products that are listed in the Annex to Regulation (EU) No 1387/2013. The suspensions for those products should therefore be deleted. Moreover, with a view to promoting integrated battery production in the Union and in accordance with the communication from the Commission entitled ‘Europe on the Move — Sustainable Mobility for Europe: safe, connected, and clean’, the suspensions for 20 additional products listed in that Annex should be withdrawn. Furthermore, another 50 suspensions should be deleted from that Annex as a result of the implementation of the agreement in the form of the Declaration on the Expansion of Trade in Information Technology Products (2), which reduced the duty rate for the products concerned to zero. |
|
(5) |
Regulation (EU) No 1387/2013 should therefore be amended accordingly. |
|
(6) |
In order to avoid any interruption of the application of the autonomous suspension scheme and to comply with the guidelines set out in the communication from the Commission concerning autonomous tariff suspensions and quotas (3), the changes provided for in this Regulation regarding the tariff suspensions for the products concerned should apply from 1 July 2019. This Regulation should therefore enter into force as a matter of urgency, |
HAS ADOPTED THIS REGULATION:
Article 1
The Annex to Regulation (EU) No 1387/2013 is amended as follows:
|
(1) |
all asterisks in the table and the endnote (*), containing the text ‘New or amended position or position with prolonged validity.’, are deleted; |
|
(2) |
in the table, the rows for the products for which the CN and TARIC codes are set out in Annex I to this Regulation are deleted; |
|
(3) |
the rows for the products listed in Annex II to this Regulation are inserted into the table according to the order of the CN and TARIC codes indicated in the first and second columns of that table, respectively. |
Article 2
This Regulation shall enter into force on the date of its publication in the Official Journal of the European Union.
It shall apply from 1 July 2019.
This Regulation shall be binding in its entirety and directly applicable in all Member States.
Done at Luxembourg, 13 June 2019.
For the Council
The President
M.C. BUDĂI
(1) Council Regulation (EU) No 1387/2013 of 17 December 2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products and repealing Regulation (EU) No 1344/2011 (OJ L 354, 28.12.2013, p. 201).
ANNEX I
In the table set out in the Annex to Regulation (EU) No 1387/2013, the rows relating to suspensions for the products identified by the following CN and TARIC codes are deleted:
|
CN code |
TARIC |
|
ex 2826 90 80 |
10 |
|
ex 2826 90 80 |
20 |
|
ex 2920 90 10 |
15 |
|
ex 2920 90 10 |
25 |
|
ex 2920 90 10 |
35 |
|
ex 2921 19 99 |
25 |
|
ex 2926 90 70 |
12 |
|
ex 3208 90 19 |
20 |
|
ex 3506 91 10 |
10 |
|
ex 3506 91 10 |
40 |
|
ex 3506 91 10 |
50 |
|
ex 3506 91 90 |
10 |
|
ex 3506 91 90 |
40 |
|
ex 3506 91 90 |
50 |
|
ex 3506 91 90 |
60 |
|
ex 3701 30 00 |
20 |
|
ex 3701 30 00 |
30 |
|
ex 3701 99 00 |
10 |
|
ex 3707 90 29 |
10 |
|
ex 3707 90 29 |
40 |
|
ex 3707 90 29 |
50 |
|
ex 3801 10 00 |
10 |
|
ex 3801 90 00 |
30 |
|
ex 3806 90 00 |
10 |
|
ex 3812 39 90 |
35 |
|
ex 3815 19 90 |
87 |
|
ex 3815 90 90 |
22 |
|
ex 3824 99 92 |
37 |
|
ex 3904 10 00 |
20 |
|
ex 3907 20 20 |
40 |
|
ex 3909 40 00 |
60 |
|
ex 3921 19 00 |
35 |
|
ex 3921 19 00 |
40 |
|
ex 5603 12 90 |
50 |
|
ex 5603 12 90 |
70 |
|
ex 5603 13 90 |
70 |
|
ex 5603 92 90 |
40 |
|
ex 5603 93 90 |
10 |
|
ex 7410 11 00 |
10 |
|
ex 8108 20 00 |
40 |
|
ex 8108 20 00 |
60 |
|
ex 8467 99 00 |
10 |
|
ex 8479 89 97 |
50 |
|
ex 8479 89 97 |
80 |
|
ex 8479 90 20 |
80 |
|
ex 8479 90 70 |
80 |
|
ex 8481 80 59 |
30 |
|
ex 8481 80 59 |
40 |
|
ex 8481 80 59 |
50 |
|
ex 8481 80 59 |
60 |
|
ex 8482 10 10 |
40 |
|
ex 8482 10 90 |
30 |
|
ex 8501 31 00 |
55 |
|
ex 8501 32 00 |
60 |
|
ex 8501 33 00 |
15 |
|
ex 8504 40 82 |
40 |
|
ex 8504 40 82 |
50 |
|
ex 8504 40 88 |
30 |
|
ex 8504 40 90 |
15 |
|
ex 8504 40 90 |
25 |
|
ex 8504 40 90 |
30 |
|
ex 8504 40 90 |
40 |
|
ex 8504 40 90 |
50 |
|
ex 8504 40 90 |
70 |
|
ex 8504 40 90 |
80 |
|
ex 8504 50 95 |
20 |
|
ex 8504 50 95 |
40 |
|
ex 8504 50 95 |
50 |
|
ex 8504 50 95 |
60 |
|
ex 8504 50 95 |
70 |
|
ex 8504 50 95 |
80 |
|
ex 8504 90 11 |
10 |
|
ex 8504 90 11 |
20 |
|
ex 8504 90 99 |
20 |
|
ex 8506 90 00 |
10 |
|
ex 8507 10 20 |
80 |
|
ex 8507 50 00 |
20 |
|
ex 8507 50 00 |
40 |
|
ex 8507 60 00 |
15 |
|
ex 8507 60 00 |
20 |
|
ex 8507 60 00 |
23 |
|
ex 8507 60 00 |
25 |
|
ex 8507 60 00 |
30 |
|
ex 8507 60 00 |
33 |
|
ex 8507 60 00 |
43 |
|
ex 8507 60 00 |
45 |
|
ex 8507 60 00 |
47 |
|
ex 8507 60 00 |
50 |
|
ex 8507 60 00 |
53 |
|
ex 8507 60 00 |
60 |
|
ex 8507 60 00 |
71 |
|
ex 8507 60 00 |
80 |
|
ex 8507 60 00 |
85 |
|
ex 8507 80 00 |
20 |
|
ex 8507 90 80 |
60 |
|
ex 8518 29 95 |
30 |
|
ex 8518 29 95 |
40 |
|
ex 8518 30 95 |
20 |
|
ex 8518 40 80 |
91 |
|
ex 8518 40 80 |
92 |
|
ex 8518 40 80 |
93 |
|
ex 8518 90 00 |
30 |
|
ex 8518 90 00 |
35 |
|
ex 8518 90 00 |
40 |
|
ex 8518 90 00 |
50 |
|
ex 8518 90 00 |
60 |
|
ex 8518 90 00 |
80 |
|
ex 8522 90 49 |
60 |
|
ex 8522 90 49 |
65 |
|
ex 8522 90 80 |
30 |
|
ex 8522 90 80 |
65 |
|
ex 8522 90 80 |
80 |
|
ex 8522 90 80 |
84 |
|
ex 8522 90 80 |
97 |
|
ex 8526 10 00 |
20 |
|
ex 8527 99 00 |
10 |
|
ex 8527 99 00 |
20 |
|
ex 8529 10 80 |
60 |
|
ex 8529 10 80 |
70 |
|
ex 8529 90 65 |
15 |
|
ex 8529 90 65 |
25 |
|
ex 8529 90 65 |
40 |
|
ex 8529 90 92 |
57 |
|
ex 8535 90 00 |
30 |
|
ex 8536 49 00 |
30 |
|
ex 8536 50 11 |
35 |
|
ex 8536 50 11 |
40 |
|
ex 8536 50 19 |
93 |
|
ex 8536 50 80 |
81 |
|
ex 8536 50 80 |
82 |
|
ex 8536 50 80 |
83 |
|
ex 8536 50 80 |
97 |
|
ex 8545 90 90 |
30 |
|
ex 9001 20 00 |
10 |
|
ex 9001 20 00 |
20 |
|
ex 9001 90 00 |
55 |
|
ex 9002 11 00 |
15 |
|
ex 9002 11 00 |
25 |
|
ex 9002 11 00 |
35 |
|
ex 9002 11 00 |
45 |
|
ex 9002 11 00 |
55 |
|
ex 9002 11 00 |
65 |
|
ex 9002 11 00 |
75 |
|
ex 9002 19 00 |
10 |
|
ex 9002 19 00 |
20 |
|
ex 9002 19 00 |
30 |
|
ex 9002 19 00 |
40 |
|
ex 9002 19 00 |
50 |
|
ex 9002 19 00 |
60 |
|
ex 9002 19 00 |
70 |
|
ex 9027 10 90 |
10 |
|
ex 9029 20 31 |
10 |
|
ex 9029 90 00 |
20 |
|
ex 9030 31 00 |
20 |
ANNEX II
In the table set out in the Annex to Regulation (EU) No 1387/2013, the following rows are inserted according to the order of the CN and TARIC codes indicated in the first and second columns of that table, respectively:
|
CN code |
TARIC |
Description |
Rate of autonomous duty |
Supplementary Unit |
Date foreseen for mandatory review |
||||||||||||||||||
|
1516 20 10 |
|
Hydrogenated castor oil, so called ‘opal-wax’ |
0 % |
— |
31.12.2023 |
||||||||||||||||||
|
ex 2818 10 11 |
10 |
Sol-Gel corundum (CAS RN 1302-74-5) with an aluminium oxide content of 99,6 % or more by weight, having a micro crystalline structure in the form of rods with an aspect ratio of 1,3 or more, but not more than 6,0 |
0 % |
— |
31.12.2023 |
||||||||||||||||||
|
ex 2826 90 80 |
10 |
Lithium hexafluorophosphate (1-) (CAS RN 21324-40-3) |
0 % |
— |
31.12.2019 |
||||||||||||||||||
|
ex 2828 10 00 |
10 |
Calcium hypochlorite (CAS RN 7778-54-3) having an active chlorine content of 65 % or more |
0 % |
— |
31.12.2023 |
||||||||||||||||||
|
ex 2905 32 00 |
10 |
(2S)-propane-1,2-diol (CAS RN 4254-15-3) |
0 % |
— |
31.12.2023 |
||||||||||||||||||
|
ex 2909 30 90 |
35 |
1-Chloro-2-(4-ethoxybenzyl)-4-iodobenzene (CAS RN 1103738-29-9) |
0 % |
— |
31.12.2023 |
||||||||||||||||||
|
ex 2910 90 00 |
25 |
Phenyloxirane (CAS RN 96-09-3) |
0 % |
— |
31.12.2023 |
||||||||||||||||||
|
ex 2912 29 00 |
55 |
Cyclohex-3-ene-1-carbaldehyde (CAS RN 100-50-5) |
0 % |
— |
31.12.2023 |
||||||||||||||||||
|
ex 2915 90 70 |
15 |
2,2-Dimethylbutanoyl chloride (CAS RN 5856-77-9) |
0 % |
— |
31.12.2023 |
||||||||||||||||||
|
ex 2916 39 90 |
57 |
2-Phenylprop-2-enoic acid (CAS RN 492-38-6) |
0 % |
— |
31.12.2023 |
||||||||||||||||||
|
ex 2918 30 00 |
25 |
(E)-1-ethoxy-3-oxobut-1-en-1-olate; 2-methylpropan-1-olate; titanium(4+) (CAS RN 83877-91-2) |
0 % |
— |
31.12.2023 |
||||||||||||||||||
|
ex 2918 99 90 |
33 |
Vanillic Acid (CAS RN 121-34-6) containing
|
0 % |
— |
31.12.2023 |
||||||||||||||||||
|
ex 2920 90 10 |
15 |
Ethyl methyl carbonate (CAS RN 623-53-0) |
0 % |
— |
31.12.2019 |
||||||||||||||||||
|
ex 2920 90 10 |
25 |
Diethyl carbonate (CAS RN 105-58-8) |
0 % |
— |
31.12.2019 |
||||||||||||||||||
|
ex 2920 90 10 |
35 |
Vinylene carbonate (CAS RN 872-36-6) |
0 % |
— |
31.12.2019 |
||||||||||||||||||
|
ex 2920 90 70 |
20 |
Diethyl phosphorochloridate (CAS RN 814-49-3) |
0 % |
— |
31.12.2023 |
||||||||||||||||||
|
ex 2921 43 00 |
70 |
5-Bromo-4-fluoro-2-methylaniline (CAS RN 627871-16-3) |
0 % |
— |
31.12.2023 |
||||||||||||||||||
|
ex 2921 45 00 |
30 |
(5 or 8)-Aminonaphthalene-2-sulphonic acid (CAS RN 51548-48-2) |
0 % |
— |
31.12.2023 |
||||||||||||||||||
|
ex 2921 45 00 |
80 |
2-Aminonaphthalene-1-sulphonic acid (CAS RN 81-16-3) |
0 % |
— |
31.12.2023 |
||||||||||||||||||
|
ex 2921 49 00 |
35 |
2-Ethylaniline (CAS RN 578-54-1) |
0 % |
— |
31.12.2023 |
||||||||||||||||||
|
ex 2922 19 00 |
55 |
3-Aminoadamantan-1-ol (CAS RN 702-82-9) |
0 % |
— |
31.12.2023 |
||||||||||||||||||
|
ex 2922 29 00 |
33 |
o-Phenetidine (CAS RN 94-70-2) |
0 % |
— |
31.12.2023 |
||||||||||||||||||
|
ex 2923 90 00 |
65 |
N,N,N-trimethyl-tricyclo[3.3.1.13,7]decan-1-aminium hydroxide (CAS RN 53075-09-5) in form of an aqueous solution with a content of N,N,N-trimethyl-tricyclo[3.3.1.13,7]decan-1-aminium hydroxide by weight of 17,5 % or more but not more than 27,5 % |
0 % |
— |
31.12.2023 |
||||||||||||||||||
|
ex 2924 19 00 |
75 |
(S)-4-((tert-Butoxycarbonyl)amino)-2-hydroxybutanoic acid (CAS RN 207305-60-0) |
0 % |
— |
31.12.2023 |
||||||||||||||||||
|
ex 2924 29 70 |
67 |
N,N′-(2,5-Dichloro-1,4-phenylene)bis[3-oxobutyramide] (CAS RN 42487-09-2) |
0 % |
— |
31.12.2023 |
||||||||||||||||||
|
ex 2924 29 70 |
70 |
N-[(benzyloxy)carbonyl]glycyl-N-[(2S)-1-{4-[(tert-butoxycarbonyl)oxy]phenyl}-3-hydroxypropan-2-yl]-L-alaninamide |
0 % |
— |
31.12.2023 |
||||||||||||||||||
|
ex 2926 90 70 |
60 |
Cyfluthrin (ISO) (CAS RN 68359-37-5) or beta-cyfluthrin (ISO) (CAS RN 1820573-27-0) with a purity by weight of 95 % or more |
0 % |
— |
31.12.2019 |
||||||||||||||||||
|
ex 2930 90 98 |
38 |
Allyl isothiocyanate (CAS RN 57-06-7) |
0 % |
— |
31.12.2023 |
||||||||||||||||||
|
ex 2930 90 98 |
50 |
3-Mercaptopropionic acid (CAS RN 107-96-0) |
0 % |
— |
31.12.2023 |
||||||||||||||||||
|
ex 2932 19 00 |
65 |
Tefuryltrione (ISO) (CAS RN 473278-76-1) |
0 % |
— |
31.12.2023 |
||||||||||||||||||
|
ex 2932 20 90 |
75 |
3-Acetyl-6-methyl-2H-pyran-2, 4(3H)-dione (CAS RN 520-45-6) |
0 % |
— |
31.12.2023 |
||||||||||||||||||
|
ex 2932 99 00 |
27 |
(2-Butyl-3-benzofuranyl)(4-hydroxy-3,5-diiodophenyl)methanone (CAS RN 1951-26-4) |
0 % |
— |
31.12.2023 |
||||||||||||||||||
|
ex 2933 19 90 |
65 |
4-Bromo-1-(1-ethoxyethyl)-1H-pyrazole (CAS RN 1024120-52-2) |
0 % |
— |
31.12.2023 |
||||||||||||||||||
|
ex 2933 39 99 |
56 |
2,5-Dichloro-4,6-dimethylnicotinonitrile (CAS RN 91591-63-8) |
0 % |
— |
31.12.2023 |
||||||||||||||||||
|
ex 2933 39 99 |
59 |
Chlorpyrifos-Methyl (ISO) (CAS RN 5598-13-0) |
0 % |
— |
31.12.2023 |
||||||||||||||||||
|
ex 2933 39 99 |
61 |
6-Bromopyridin-2-amine (CAS RN 19798-81-3) |
0 % |
— |
31.12.2023 |
||||||||||||||||||
|
ex 2933 39 99 |
62 |
Ethyl 2,6-Dichloronicotinate (CAS RN 58584-86-4) |
0 % |
— |
31.12.2023 |
||||||||||||||||||
|
ex 2933 39 99 |
64 |
Methyl 1-(3-chloropyridin-2-yl)-3-hydroxymethyl-1H-pyrazole-5-carboxylate (CAS RN 960316-73-8) |
0 % |
— |
31.12.2023 |
||||||||||||||||||
|
ex 2933 39 99 |
68 |
1-(3-Chloropyridin-2-yl)-3-[[5-(trifluoromethyl)-2H-tetrazol-2-yl]methyl]-1H-pyrazole-5-carboxylic acid (CAS RN 1352319-02-8) with a purity by weight of 85 % or more |
0 % |
— |
31.12.2023 |
||||||||||||||||||
|
ex 2933 49 90 |
80 |
Ethyl 6,7,8-trifluoro-1-[formyl(methyl)amino]-4-oxo-1,4-dihydroquinoline-3-carboxylate (CAS RN 100276-65-1) |
0 % |
— |
31.12.2020 |
||||||||||||||||||
|
ex 2933 54 00 |
10 |
5,5′-(1,2-diazenediyl)bis [2,4,6 (1H, 3H, 5H)-pyrimidinetrione] (CAS RN 25157-64-6) |
0 % |
— |
31.12.2023 |
||||||||||||||||||
|
ex 2933 59 95 |
63 |
1-(3-Chlorophenyl) piperazine (CAS RN 6640-24-0) |
0 % |
— |
31.12.2023 |
||||||||||||||||||
|
ex 2933 69 80 |
27 |
Troclosene sodium dihydrate (INNM) (CAS RN 51580-86-0) |
0 % |
— |
31.12.2023 |
||||||||||||||||||
|
ex 2933 99 80 |
58 |
Ipconazole (ISO) (CAS RN 125225-28-7) with a purity by weight of 90 % or more |
0 % |
— |
31.12.2023 |
||||||||||||||||||
|
ex 2933 99 80 |
59 |
Hydrates of Hydroxybenzotriazole (CAS RN 80029-43-2 and CAS RN 123333-53-9) |
0 % |
— |
31.12.2023 |
||||||||||||||||||
|
ex 2933 99 80 |
61 |
(1R,5S)-8-Benzyl-8-azabicyclo(3.2.1)octan-3-one hydrochloride (CAS RN 83393-23-1) |
0 % |
— |
31.12.2023 |
||||||||||||||||||
|
ex 2933 99 80 |
63 |
L-Prolinamide (CAS RN 7531-52-4) |
0 % |
— |
31.12.2023 |
||||||||||||||||||
|
ex 2933 99 80 |
68 |
5-((1S,2S)-2-((2R,6S,9S,11R,12R,14aS,15S,16S,20R,23S,25aR)-9-amino-20-((R)-3-amino-1-hydroxy-3-oxopropyl)-2,11,12,15-tetrahydroxy-6-((R)-1-hydroxyethyl)-16-methyl-5,8,14,19,22,25-hexaoxotetracosahydro-1H-dipyrrolo[2,1-c:2′,1′-l][1,4,7,10,13,16]hexaazacyclohenicosin-23-yl)-1,2-dihydroxyethyl)-2-hydroxyphenyl hydrogen sulphate (CAS RN 168110-44-9) |
0 % |
— |
31.12.2023 |
||||||||||||||||||
|
ex 2934 99 90 |
78 |
[(3aS,5R,6S,6aS)-6-Hydroxy-2,2-dimethyltetrahydrofuro[2,3-d][1,3]dioxol-5-yl] (morpholino)methanone (CAS RN 1103738-19-7) |
0 % |
— |
31.12.2023 |
||||||||||||||||||
|
ex 2934 99 90 |
80 |
2-(dimethylamino)-2-[(4-methylphenyl)methyl]-1-[4-(morpholin-4-yl)phenyl]butan-1-one (CAS RN 119344-86-4) |
0 % |
— |
31.12.2023 |
||||||||||||||||||
|
ex 2935 90 90 |
33 |
4-Chloro-3-pyridinesulphonamide (CAS RN 33263-43-3) |
0 % |
— |
31.12.2023 |
||||||||||||||||||
|
ex 2935 90 90 |
37 |
1,3-Dimethyl-1H-pyrazole-4-sulfonamide (CAS RN 88398-53-2) |
0 % |
— |
31.12.2023 |
||||||||||||||||||
|
ex 2935 90 90 |
60 |
4-[(3-Methylphenyl)amino]pyridine-3-sulphonamide (CAS RN72811-73-5) |
0 % |
— |
31.12.2023 |
||||||||||||||||||
|
ex 3204 17 00 |
31 |
Colourant C.I. Pigment Red 63:1 (CAS RN 6417-83-0) and preparations based thereon with a colourant C.I. Pigment Red 63:1 content of 70 % or more by weight |
0 % |
— |
31.12.2023 |
||||||||||||||||||
|
ex 3205 00 00 |
20 |
Colourant C.I. Solvent Red 48 (CAS RN 13473-26-2) preparation, in a form of dry powder, containing by weight:
|
0 % |
— |
31.12.2023 |
||||||||||||||||||
|
ex 3205 00 00 |
30 |
Colourant C.I. Pigment Red 174 (CAS RN 15876-58-1) preparation, in a form of dry powder, containing by weight:
|
0 % |
— |
31.12.2023 |
||||||||||||||||||
|
ex 3208 90 19 |
55 |
Preparation of 5 % or more but not more than 20 % by weight of a copolymer of propylene and maleic anhydride, or a blend of polypropylene and a copolymer of propylene and maleic anhydride, or a blend of polypropylene and a copolymer of propylene, isobutene and maleic anhydride in an organic solvent |
0 % |
— |
31.12.2020 |
||||||||||||||||||
|
ex 3506 91 90 |
10 |
Adhesive based on an aqueous dispersion of a mixture of dimerised rosin and a copolymer of ethylene and vinyl acetate (EVA) |
0 % |
— |
31.12.2023 |
||||||||||||||||||
|
ex 3506 91 90 |
40 |
Acrylic pressure sensitive adhesive with a thickness of 0,076 mm or more but not more than 0,127 mm, put up in rolls of a width of 45,7 cm or more but not more than 132 cm supplied on a release liner with an initial peel adhesion release value of not less than 15 N/25 mm (measured according to ASTM D3330) |
0 % |
— |
31.12.2019 |
||||||||||||||||||
|
ex 3506 91 90 |
50 |
Preparation containing by weight:
dissolved in:
|
0 % |
— |
31.12.2020 |
||||||||||||||||||
|
ex 3506 91 90 |
60 |
Temporary wafer-bonding adhesive material in the form of a suspension of a solid polymer in D-limonene (CAS RN 5989-27-5) with a polymeric content by weight of 25 % or more but not more than 35 % |
0 % |
l |
31.12.2022 |
||||||||||||||||||
|
ex 3812 39 90 |
35 |
Mixture containing by weight:
|
0 % |
— |
31.12.2023 |
||||||||||||||||||
|
ex 3815 12 00 |
20 |
Spherical catalyst consisting of a support of aluminium oxide coated with platinum, with
|
0 % |
— |
31.12.2023 |
||||||||||||||||||
|
ex 3815 12 00 |
30 |
Catalyst
for use in the production of motor vehicles (1) |
0 % |
— |
31.12.2023 |
||||||||||||||||||
|
ex 3815 90 90 |
43 |
Catalyst in powder form consisting by weight of
|
0 % |
— |
31.12.2022 |
||||||||||||||||||
|
ex 3824 99 92 |
31 |
Liquid crystal mixtures for use in the manufacture of LCD (liquid crystal display) modules (1) |
0 % |
— |
31.12.2023 |
||||||||||||||||||
|
ex 3824 99 92 |
37 |
Mixture of acetates of 3-butene-1,2-diol with a content by weight of 65 % or more of 3-butene-1,2-diol diacetate (CAS RN 18085-02-4) |
0 % |
— |
31.12.2023 |
||||||||||||||||||
|
ex 3824 99 96 |
33 |
Buffer cartridge not exceeding 8000 ml containing:
|
0 % |
— |
31.12.2023 |
||||||||||||||||||
|
ex 3904 69 80 |
20 |
Copolymer of tetrafluoroethylene, heptafluoro-1-pentene and ethene (CAS RN 94228-79-2) |
0 % |
— |
31.12.2023 |
||||||||||||||||||
|
ex 3904 69 80 |
30 |
Copolymer of tetrafluoroethylene, hexafluoropropene and ethene |
0 % |
— |
31.12.2023 |
||||||||||||||||||
|
ex 3907 20 20 |
40 |
Copolymer of tetrahydrofuran and tetrahydro-3-methylfuran with a number average molecular weight (Mn) of 900 or more but not more than 3 600 |
0 % |
— |
31.12.2023 |
||||||||||||||||||
|
ex 3920 99 59 |
30 |
Poly(tetrafluoroethylene) film containing by weight 10 % or more of graphite |
0 % |
— |
31.12.2023 |
||||||||||||||||||
|
ex 3921 19 00 |
40 |
Transparent, microporous, acrylic acid grafted polyethylene film, in the form of rolls, with:
of a kind used for the manufacture of alkaline battery separators |
0 % |
— |
31.12.2019 |
||||||||||||||||||
|
ex 3926 30 00 |
40 |
Plastic internal door handle used in the manufacture of motor vehicles (1) |
0 % |
— |
31.12.2023 |
||||||||||||||||||
|
ex 5402 44 00 |
10 |
Synthetic elastomeric filament yarn:
for use in the manufacture of disposable hygiene products of heading 9619 (1) |
0 % |
— |
31.12.2023 |
||||||||||||||||||
|
ex 7006 00 90 |
40 |
Plates of sodalime glass of STN (Super Twisted Nematic) quality having:
of a kind used in the manufacture of LCD (liquid crystal display) modules |
0 % |
— |
31.12.2023 |
||||||||||||||||||
|
ex 7019 40 00 ex 7019 52 00 |
70 30 |
E-fibre glass fabrics:
for the exclusive use in the manufacture of prepregs and copper clad laminates (1) |
0 % |
— |
31.12.2021 |
||||||||||||||||||
|
ex 7019 52 00 |
40 |
Epoxy resin coated glass woven fabric containing by weight:
|
0 % |
— |
31.12.2023 |
||||||||||||||||||
|
ex 7410 11 00 ex 8507 90 80 ex 8545 90 90 |
10 60 30 |
Roll of laminate foil of graphite and copper, with:
for use in the manufacture of lithium-ion electric rechargeable batteries (1) |
0 % |
— |
31.12.2019 |
||||||||||||||||||
|
ex 7607 20 90 |
10 |
Aluminium foil, in rolls:
for use in the manufacture of lithium-ion battery cell pouches (1) |
0 % |
— |
31.12.2019 |
||||||||||||||||||
|
8104 11 00 |
|
Unwrought magnesium, containing at least 99,8 % by weight of magnesium |
0 % |
— |
31.12.2023 |
||||||||||||||||||
|
ex 8108 20 00 |
40 |
Titanium alloy ingot,
containing alloy elements by weight of:
|
0 % |
p/st |
31.12.2020 |
||||||||||||||||||
|
ex 8108 20 00 |
60 |
Titanium alloy ingot,
containing alloy elements by weight of:
|
0 % |
p/st |
31.12.2020 |
||||||||||||||||||
|
ex 8301 20 00 |
10 |
Mechanical or electromechanical steering column lock:
for use in the manufacture of goods of Chapter 87 (1) |
0 % |
— |
31.12.2023 |
||||||||||||||||||
|
ex 8302 30 00 |
10 |
Support bracket for an exhaust system:
for use in the manufacture of exhaust systems for automobiles (1) |
0 % |
— |
31.12.2023 |
||||||||||||||||||
|
ex 8409 91 00 |
60 |
The air intake module for engine cylinders consisting of:
for use in the manufacture of goods of Chapter 87 (1) |
0 % |
— |
31.12.2023 |
||||||||||||||||||
|
ex 8409 91 00 |
70 |
Inlet manifold, exclusively for use in the manufacture of the motor vehicles with:
|
0 % |
— |
31.12.2023 |
||||||||||||||||||
|
ex 8409 99 00 |
65 |
The exhaust gas recirculation assembly consisting of:
for use in the manufacture of diesel engines of motor vehicles (1) |
0 % |
— |
31.12.2023 |
||||||||||||||||||
|
ex 8414 10 25 |
30 |
Tandem pump consisting of:
for use in the manufacture of engines of motor vehicles (1) |
0 % |
— |
31.12.2023 |
||||||||||||||||||
|
ex 8414 10 89 |
30 |
Electric vacuum pump with:
for use in the manufacture of goods of Chapter 87 (1) |
0 % |
— |
31.12.2023 |
||||||||||||||||||
|
ex 8414 30 89 |
30 |
Open shaft, scroll type compressor with clutch assembly, of a power of more than 0,4 kW, for air conditioning in vehicles, for use in the manufacture of motor vehicles of Chapter 87 (1) |
0 % |
— |
31.12.2023 |
||||||||||||||||||
|
ex 8414 59 35 |
20 |
Radial fan, with:
|
0 % |
— |
31.12.2023 |
||||||||||||||||||
|
|
|
with a FIN (Fan Interconnect Network) interface for communication with the heating and air-conditioning control unit used in car seat ventilation systems |
|
|
|
||||||||||||||||||
|
ex 8467 99 00 |
10 |
Mechanical switches for connecting electrical circuits, with:
for use in the manufacture of machines falling within heading 8467 (1) |
0 % |
p/st |
31.12.2019 |
||||||||||||||||||
|
ex 8481 80 59 |
30 |
Two-way flow control valve with housing, with:
|
0 % |
— |
31.12.2022 |
||||||||||||||||||
|
ex 8481 80 59 |
40 |
Flow-control valve
|
0 % |
— |
31.12.2022 |
||||||||||||||||||
|
ex 8481 80 59 |
50 |
Electromagnetic valve for quantity control with
|
0 % |
— |
31.12.2022 |
||||||||||||||||||
|
ex 8481 80 59 |
60 |
Electromagnetic valve for quantity control
|
0 % |
— |
31.12.2022 |
||||||||||||||||||
|
ex 8481 80 79 ex 8481 80 99 |
30 30 |
Service Valve which suits for R410A or R32 gas while connecting indoor and outdoor units with:
for use in the manufacture of air conditioners (1) |
0 % |
— |
31.12.2023 |
||||||||||||||||||
|
ex 8484 20 00 |
20 |
Mechanical face sealing device made of two movable rings (one ceramic mating, having a thermal conductivity lower than 80W/Mk and the other carbon sliding), one spring and a nitrile sealant on the external side, of a kind used in manufacturing circulation pumps of cooling systems in motor vehicles |
0 % |
— |
31.12.2023 |
||||||||||||||||||
|
ex 8501 10 10 |
30 |
Motors for air pumps, with:
for use in the manufacture of pneumatic support and ventilation systems for car seats (1) |
0 % |
— |
31.12.2023 |
||||||||||||||||||
|
ex 8501 31 00 ex 8501 32 00 |
55 40 |
DC motor with or without commutator, with
for driving hand-held power tools or lawn mowers |
0 % |
— |
31.12.2023 |
||||||||||||||||||
|
ex 8501 33 00 |
25 |
AC traction motor of an output of 75 kW or more but not more than 375 kW, with:
for use in the manufacture of electric vehicles (1) |
0 % |
— |
31.12.2019 |
||||||||||||||||||
|
ex 8503 00 99 |
55 |
Stator for brushless motor, with:
of a kind used in the manufacture of washing machine, washer-dryer or dryer equipped with direct drive drums |
0 % |
p/st |
31.12.2020 |
||||||||||||||||||
|
ex 8506 90 00 |
10 |
Cathode, in rolls, for air zinc button cell batteries (hearing aid batteries) (1) |
0 % |
— |
31.12.2023 |
||||||||||||||||||
|
ex 8507 60 00 |
13 |
Prismatic lithium-ion electric accumulators with:
for use in the manufacture of rechargeable electric vehicle batteries (1) |
0 % |
— |
31.12.2019 |
||||||||||||||||||
|
ex 8507 60 00 |
15 |
Cylindrical lithium-ion-accumulators or modules with:
for use in the manufacture of electric bicycles (1) |
0 % |
— |
31.12.2019 |
||||||||||||||||||
|
ex 8507 60 00 |
18 |
Rectangular lithium-ion polymer accumulator equipped with a battery management system and can-bus interface with:
for use in the manufacture of vehicle capable of being charged by plugging to external source of electric power of heading 8703 (1) |
0 % |
— |
31.12.2019 |
||||||||||||||||||
|
ex 8507 60 00 |
30 |
Cylindrical lithium-ion accumulator or module, with a length of 63 mm or more and a diameter of 17,2 mm or more, having a nominal capacity of 1 200 mAh or more, for use in the manufacture of rechargeable batteries (1) |
0 % |
— |
31.12.2019 |
||||||||||||||||||
|
ex 8507 60 00 |
33 |
Lithium-ion accumulator, with:
|
0 % |
— |
31.12.2019 |
||||||||||||||||||
|
ex 8507 60 00 |
50 |
Modules for the assembly of batteries of ion lithium electric accumulators with:
|
0 % |
— |
31.12.2019 |
||||||||||||||||||
|
ex 8507 60 00 |
71 |
Lithium-ion rechargeable batteries, with:
|
0 % |
— |
31.12.2019 |
||||||||||||||||||
|
ex 8507 60 00 |
85 |
Lithium-ion Rectangular modules for incorporation in lithium-ion rechargeable batteries:
|
0 % |
— |
31.12.2019 |
||||||||||||||||||
|
ex 8507 90 30 |
20 |
Safety Reinforced Separator designed to separate cathode and anode in lithium-ion electric accumulators for use in the manufacture of lithium-ion electric accumulators for motor vehicle batteries (1) |
0 % |
— |
31.12.2019 |
||||||||||||||||||
|
ex 8529 90 65 |
25 |
Printed circuit board assembly comprising:
for use in the manufacture of home entertainment systems (1) |
0 % |
p/st |
31.12.2019 |
||||||||||||||||||
|
ex 8529 90 65 |
28 |
Electronic assembly comprising at least a printed circuit board with:
|
0 % |
p/st |
31.12.2020 |
||||||||||||||||||
|
ex 8529 90 65 |
40 |
Printed circuit board subassembly, comprising:
for use in the manufacture of home entertainment systems (1) |
0 % |
p/st |
31.12.2019 |
||||||||||||||||||
|
ex 8529 90 92 |
52 |
LCD module, glass or plastic covered and optically bonded, with
|
0 % |
— |
31.12.2023 |
||||||||||||||||||
|
|
|
of a kind used as a driver information display in motor vehicles of Chapter 87 (1) |
|
|
|
||||||||||||||||||
|
ex 8529 90 92 |
54 |
LCD display with:
for use in the manufacture of motor vehicles of Chapter 87 (1) |
0 % |
— |
31.12.2023 |
||||||||||||||||||
|
ex 8529 90 92 |
57 |
Metal holder, metal fixing item or internal stiffener of metal, for use in the manufacture of televisions, monitors and video players (1) |
0 % |
p/st |
31.12.2021 |
||||||||||||||||||
|
ex 8535 90 00 |
30 |
Semiconductor module switch in a casing:
|
0 % |
p/st |
31.12.2020 |
||||||||||||||||||
|
ex 8537 10 91 |
57 |
Programmable memory control board with:
for use in the manufacture of 3D printers (1) |
0 % |
— |
31.12.2023 |
||||||||||||||||||
|
ex 8537 10 91 |
59 |
Electronic control units for controlling inter axle torque transferring in all-wheel drive vehicles including:
|
0 % |
— |
31.12.2023 |
||||||||||||||||||
|
ex 8537 10 91 |
63 |
Electronic control units able to control automatic continuous variable transmission for passenger vehicles including:
|
0 % |
— |
31.12.2023 |
||||||||||||||||||
|
ex 8537 10 91 |
67 |
Electronic Engine Control Unit (ECU) with:
for use in the manufacture of goods of Chapter 87 (1) |
0 % |
— |
31.12.2023 |
||||||||||||||||||
|
ex 8708 40 20 ex 8708 40 50 |
60 50 |
Automatic transmission assembly with rotary gear shifter with:
with dimensions of:
for use in the manufacture of the vehicles in heading 87 (1) |
0 % |
— |
31.12.2023 |
||||||||||||||||||
|
ex 8708 50 20 ex 8708 50 99 ex 8708 99 10 ex 8708 99 97 |
60 15 45 65 |
Car transfer case with single input, dual output, to distribute torque between front and rear axles in an aluminium housing, with dimension of not more than 565 × 570 × 510 mm, comprising at least:
|
0 % |
— |
31.12.2019 |
||||||||||||||||||
|
ex 8708 50 20 ex 8708 50 99 |
65 20 |
Intermediate steel shaft connecting the gearbox with semi-axle with:
for use in the manufacture of goods of Chapter 87 (1) |
0 % |
— |
31.12.2023 |
||||||||||||||||||
|
ex 8708 50 20 ex 8708 50 99 |
70 25 |
Housing of tripod type half shaft inboard joint for transmitting a torque from engine and transmission to wheels of motor vehicles with:
|
0 % |
— |
31.12.2023 |
||||||||||||||||||
|
ex 8708 50 20 ex 8708 50 99 |
75 35 |
Outboard joint assembly for transmitting a torque from engine and transmission to wheels of motor vehicles, consisting of:
capable of working at constant speed at variable articulation angle not higher than 50 degrees |
0 % |
— |
31.12.2023 |
||||||||||||||||||
|
ex 8708 80 99 |
20 |
Aluminium suspension link arm, with dimensions of:
equipped with at least two bushed holes made of aluminium alloy with the following characteristics:
|
0 % |
— |
31.12.2023 |
||||||||||||||||||
|
ex 8708 92 99 |
10 |
Exhaust system inner liner:
for use in the manufacture of exhaust systems for automobiles (1) |
0 % |
— |
31.12.2023 |
||||||||||||||||||
|
ex 8708 92 99 |
20 |
Pipe for guiding exhaust gases from the combustion engine:
for use in the manufacture of exhaust systems for automobiles (1) |
0 % |
— |
31.12.2023 |
||||||||||||||||||
|
ex 8708 92 99 |
30 |
Exhaust system end cover:
for use in the manufacture of exhaust systems for automobiles (1) |
0 % |
— |
31.12.2023 |
||||||||||||||||||
|
ex 9001 90 00 |
55 |
Optical, diffuser, reflector or prism sheets, unprinted diffuser plates, whether or not possessing polarising properties, specifically cut |
0 % |
— |
31.12.2023 |
||||||||||||||||||
|
ex 9002 11 00 |
15 |
Infrared lens with motorised focus adjustment,
for use in the manufacture of thermal imaging cameras, infrared binoculars, weapons scopes (1) |
0 % |
— |
31.12.2020 |
||||||||||||||||||
|
ex 9002 11 00 |
18 |
Lens assembly consisting of a cylinder-shaped cover made of metal or plastic and optical elements with:
of a kind used for the production of CMOS (Complementary metal–oxide-semiconductor) automotive cameras |
0 % |
— |
31.12.2023 |
||||||||||||||||||
|
ex 9002 11 00 |
25 |
Infrared optical unit composed of
assembled on a machined aluminium alloy support, of a kind used for thermal imaging cameras |
0 % |
— |
31.12.2021 |
||||||||||||||||||
|
ex 9002 11 00 |
35 |
Infrared optical unit composed of
assembled on a machined aluminium alloy support, of kind a used for thermal imaging cameras |
0 % |
— |
31.12.2021 |
||||||||||||||||||
|
ex 9002 11 00 |
45 |
Infrared optical unit
of a kind used for thermal cameras |
0 % |
— |
31.12.2021 |
||||||||||||||||||
|
ex 9002 11 00 |
55 |
Infrared optical unit composed of
assembled on a machined aluminium alloy support, of a kind used for thermal imaging cameras |
0 % |
— |
31.12.2021 |
||||||||||||||||||
|
ex 9002 11 00 |
65 |
Infrared optical unit
of a kind used for thermal imaging cameras |
0 % |
— |
31.12.2021 |
||||||||||||||||||
|
ex 9002 11 00 |
75 |
Infrared optical unit composed of
assembled on a machined aluminium alloy support, of a kind used for thermal imaging cameras |
0 % |
— |
31.12.2021 |
||||||||||||||||||
|
ex 9029 20 31 ex 9029 90 00 |
20 30 |
Clustered instrument panel with the microprocessor control board, with or without stepping motors, and LED indicators showing at least:
communicating via CAN-BUS and/or K-LINE protocols, of a kind used in the manufacture of goods of Chapter 87 |
0 % |
p/st |
31.12.2019 |
(1) Suspension of duties is subject to end-use customs supervision in accordance with Article 254 of Regulation (EU) No 952/2013 of the European Parliament and of the Council of 9 October 2013 laying down the Union Customs Code (OJ L 269, 10.10.2013, p. 1).