EUR-Lex Access to European Union law

Back to EUR-Lex homepage

This document is an excerpt from the EUR-Lex website

Document 32006R0208

Commission Regulation (EC) No 208/2006 of 7 February 2006 amending Annexes VI and VIII to Regulation (EC) No 1774/2002 of the European Parliament and of the Council as regards processing standards for biogas and composting plants and requirements for manure (Text with EEA relevance)

SL L 36, 8.2.2006, p. 25–31 (ES, CS, DA, DE, ET, EL, EN, FR, IT, LV, LT, HU, NL, PL, PT, SK, SL, FI, SV)
SL L 327M, 5.12.2008, p. 553–563 (MT)

Ovaj dokument objavljen je u određenim posebnim izdanjima (BG, RO)

Legal status of the document No longer in force, Date of end of validity: 03/03/2011; Implicitno stavljeno izvan snage 32009R1069

ELI: http://data.europa.eu/eli/reg/2006/208/oj

8.2.2006   

EN

Official Journal of the European Union

L 36/25


COMMISSION REGULATION (EC) No 208/2006

of 7 February 2006

amending Annexes VI and VIII to Regulation (EC) No 1774/2002 of the European Parliament and of the Council as regards processing standards for biogas and composting plants and requirements for manure

(Text with EEA relevance)

THE COMMISSION OF THE EUROPEAN COMMUNITIES,

Having regard to the Treaty establishing the European Community,

Having regard to Regulation (EC) No 1774/2002 of the European Parliament and of the Council of 3 October 2002 laying down health rules concerning animal by-products not intended for human consumption (1), and in particular Article 32(1) thereof,

Whereas:

(1)

Regulation (EC) No 1774/2002 provides for measures to ensure that manure and products derived there from are used or disposed of in such a way as not to pose a risk to public or animal health.

(2)

Chapter II of Annex VI to Regulation (EC) No 1774/2002 sets out specific requirements for the approval of biogas and composting plants using animal by-products.

(3)

Following the opinion of the European Food Safety Authority (EFSA) of 7 September 2005 on the safety vis-à-vis biological risks of biogas and composting treatment standards of animal by-products, it is appropriate to amend Chapter II of Annex VI to Regulation (EC) No 1774/2002 by allowing authorisation of other process parameters.

(4)

Chapter III of Annex VIII to Regulation (EC) No 1774/2002 sets out requirements for manure, processed manure and processed manure products and lays down the processing and control parameters manure has to undergo to fulfil the requirements for processed manure and processed manure products.

(5)

Following the opinion of EFSA of 7 September 2005 on the biological safety of heat treatment of manure, it is appropriate to amend the relevant requirements of Chapter III of Annex VIII to take account of that opinion.

(6)

Regulation (EC) No 1774/2002 should therefore be amended accordingly.

(7)

The measures provided for in this Regulation are in accordance with the opinion of the Standing Committee on the Food Chain and Animal Health,

HAS ADOPTED THIS REGULATION:

Article 1

Annexes VI and VIII to Regulation (EC) No 1774/2002 are amended in accordance with the Annex to this Regulation.

Article 2

This Regulation shall enter into force on the third day following its publication in the Official Journal of the European Union.

It shall apply from 1 January 2006. However, the requirements in Annex VI, chapter II, point C(13a) and in Annex VIII, chapter III, point (II)(A)(5)(c) to Regulation (EC) No 1774/2002 shall apply from 1 January 2007.

This Regulation shall be binding in its entirety and directly applicable in all Member States.

Done at Brussels, 7 February 2006.

For the Commission

Markos KYPRIANOU

Member of the Commission


(1)   OJ L 273, 10.10.2002, p. 1. Regulation as last amended by Commission Regulation (EC) No 416/2005 (OJ L 66, 12.3.2005, p. 10).


ANNEX

Annexes VI and VIII to Regulation (EC) No 1774/2002 are amended as follows:

1.

In Annex VI, Chapter II is amended as follows:

(a)

Points A(1) and (2) are replaced by the following:

‘1.

A biogas plant must be equipped with:

(a)

a pasteurisation/hygienisation unit, which cannot be by-passed, with:

(i)

installations for monitoring temperature against time;

(ii)

recording devices to record continuously the results of the monitoring measurements referred to in (i); and

(iii)

an adequate safety system to prevent insufficient heating;

(b)

adequate facilities for the cleaning and disinfecting of vehicles and containers upon leaving the biogas plant.

However, a pasteurisation/hygienisation unit shall not be mandatory for biogas plants that transform only:

(i)

animal by-products that have undergone processing Method 1;

(ii)

Category 3 material that has undergone pasteurisation/hygienisation elsewhere; or

(iii)

animal by-products which may be used as raw material without processing.

If the biogas plant is located on premises where farmed animals are kept and does not only use manure which accrues from those animals, the plant shall be located at an adequate distance from the area where such animals are kept and there must be, in any case, total physical separation between that plant and those animals and their feed and bedding, with fencing where necessary.

2.

A composting plant must be equipped with:

(a)

a closed composting reactor, which cannot be by-passed, with:

(i)

installations for monitoring temperature against time;

(ii)

recording devices to record, where appropriate continuously, the results of the monitoring measurements referred to in (i); and

(iii)

an adequate safety system to prevent insufficient heating;

(b)

adequate facilities for cleaning and disinfecting of vehicles and containers transporting untreated animal by-products.

However, other types of composting systems may be allowed provided they:

(i)

ensure adequate measures to control vermin;

(ii)

are managed in such a way that all the material in the system achieves the required time and temperature parameters, including, where appropriate, continuous monitoring of the parameters;

(iii)

comply with all other requirements of this Regulation.

If the composting plant is located on premises where farmed animals are kept and does not only use manure which accrues from those animals, the composting plant shall be located at an adequate distance from the area where animals are kept and there must, in any case, be total physical separation between that composting plant and the animals and their feed and bedding, with fencing where necessary.’

(b)

Point B(11) is replaced by the following:

‘11.

Digestion residues and compost must be handled and stored at the biogas respective composting plant in such way as to prevent recontamination.’

(c)

Point C(12) is replaced by the following:

‘12.

Category 3 material used as raw material in a biogas plant equipped with a pasteurisation/hygienisation unit must be submitted to the following minimum requirements:

(a)

maximum particle size before entering the unit: 12 mm;

(b)

minimum temperature in all material in the unit: 70 °C; and

(c)

minimum time in the unit without interruption: 60 minutes.

However, category 3 milk, colostrums and milk products may be used without pasteurisation/hygienisation as raw material in a biogas plant, if the competent authority does not consider them to present a risk of spreading any serious transmissible disease.’

(d)

Point C(13) is replaced by the following:

‘13.

Category 3 material used as raw material in a composting plant must be submitted to the following minimum requirements:

(a)

maximum particle size before entering the composting reactor: 12 mm;

(b)

minimum temperature in all material in the reactor: 70 °C; and

(c)

minimum time in the reactor at 70 °C (all material): 60 minutes.’

(e)

The following Point C(13a) is inserted:

‘13a.

However, the competent authority may authorise the use of other standardised process parameters provided an applicant demonstrates that such parameters ensure minimising of biological risks. That demonstration shall include a validation, which shall be carried out in accordance with points (a) to (f):

(a)

Identification and analysis of possible hazards, including the impact of input material, based on a full definition of the processing conditions.

(b)

A risk assessment, which evaluates how the specific processing conditions referred to in (a) are achieved in practice under normal and atypical situations.

(c)

Validation of the intended process by measuring the reduction of viability/infectivity of:

(i)

endogenous indicator organisms during the process, where the indicator is:

consistently present in the raw material in high numbers,

not less heat resistant to the lethal aspects of the treatment process, but also not significantly more resistant than the pathogens for which it is being used to monitor,

relatively easy to quantify and relatively easy to identify and to confirm;

or

(ii)

a well-characterised test organism or virus, during exposure, introduced in a suitable test body into the starting material.

(d)

The validation of the intended process referred to in (c) must demonstrate that the process achieves the following overall risk reduction:

(i)

for thermal and chemical processes by:

reduction of 5 log10 of Enterococcus faecalis or Salmonella Senftenberg (775W, H2S negative),

reduction of infectivity titre of thermo resistant viruses such as parvovirus by at least 3 log10, whenever they are identified as a relevant hazard;

and

(ii)

as regards chemical processes also by:

reduction of resistant parasites such as eggs of ascaris sp. by at least 99,9 % (3 log10) of viable stages.

(e)

Designing a complete control programme including procedures for monitoring the functioning of the process referred to in (c).

(f)

Measures ensuring continuous monitoring and supervision of the relevant process parameters fixed in the control programme when operating the plant.

Details on the relevant process parameters used in a biogas or composting plant as well as other critical control points must be recorded and maintained so that the owner, operator or their representative and the competent authority can monitor the operation of the plant. Records must be made available to the competent authority on request.

Information relating to a process authorised under this point must be made available to the Commission on request.’

(f)

In point C(14), point (b) shall be replaced by the following:

‘(b)

considers that the residues or compost are unprocessed material.’

(g)

Point D(15) is replaced by the following:

‘15.

Representative samples of the digestion residues or compost taken during or immediately after processing at the biogas or composting plant in order to monitor the process must comply with the following standards:

Escherichia coli: n = 5, c = 1, m = 1 000, M = 5 000 in 1 g;

or

Enterococaceae: n = 5, c = 1, m = 1 000, M = 5 000 in 1 g;

and

Representative samples of the digestion residues or compost taken during or on withdrawal from storage at the biogas or composting plant must comply with the following standards:

Salmonella: absence in 25 g: n = 5; c = 0; m = 0; M = 0

where:

n

=

number of samples to be tested;

m

=

threshold value for the number of bacteria; the result is considered satisfactory if the number of bacteria in all samples does not exceed m;

M

=

maximum value for the number of bacteria; the result is considered unsatisfactory if the number of bacteria in one or more samples is M or more; and

c

=

number of samples the bacterial count of which may be between m and M, the sample still being considered acceptable if the bacterial count of the other samples is m or less.

Digestion residues or compost, which does not comply with the requirements set out in this Chapter shall be reprocessed, in the case of Salmonella handled or disposed of in accordance with the instructions of the competent authority.’

2.

Annex VIII, Chapter III, Point II.A.(5) is replaced by the following:

‘5.

The placing on the market of processed manure and processed manure products shall be subject to the following conditions set out in points (a) to (e):

(a)

They must come from a technical plant, a biogas plant or a composting plant approved by the competent authority in accordance with this Regulation.

(b)

They must have been subjected to a heat treatment process of at least 70 °C for at least 60 minutes and they must have been subjected to reduction in spore-forming bacteria and toxic formation.

(c)

However, the competent authority may authorise the use of other standardised process parameters than those described in (b) provided an applicant demonstrates that such parameters ensure minimising of biological risks. This demonstration shall include a validation, which shall be carried out as follows:

(i)

Identification and analysis of possible hazards including the impact of input material, based on a full definition of the processing conditions, and a risk assessment, which evaluates how the specific processing conditions are achieved in practice under normal and atypical situations.

(ii)

Validation of the intended process

(ii-1)

by measuring the reduction of viability/infectivity of endogenous indicator organisms during the process, where the indicator is:

consistently present in the raw material in high numbers,

not less heat resistant to the lethal aspects of the treatment process, but also not significantly more resistant than the pathogens for which it is being used to monitor,

relatively easy to quantify and relatively easy to identify and confirm;

or

(ii-2)

by measuring the reduction of viability/infectivity, during exposure, of a well-characterised test organism or virus introduced in a suitable test body into the starting material.

(iii)

The validation referred to in point (ii) must demonstrate that the process achieves the following overall risk reduction:

for thermal and chemical processes by reduction of Enterococcus faecalis by at least 5 log10 and by reduction of infectivity titre of thermo resistant viruses such as parvovirus, where they are identified as a relevant hazard, by at least 3 log10,

for chemical processes also by reduction of resistant parasites such as eggs of ascaris sp. by at least 99,9 % (3 log10) of viable stages.

(iv)

Designing a complete control programme including procedures for monitoring the process.

(v)

Measures ensuring continuous monitoring and supervision of the relevant process parameters fixed in the control programme when operating the plant.

Details on the relevant process parameters used in a plant as well as other critical control points must be recorded and maintained so that the owner, operator or their representative and the competent authority can monitor the operation of the plant. Records must be made available to the competent authority on request.

Information relating to a process authorised under this point must be made available to the Commission on request.

(d)

Representative samples of the manure taken during or immediately after processing at the plant in order to monitor the process must comply with the following standards:

Escherichia coli: n = 5, c = 5, m = 0, M = 1 000 in 1 g;

or

Enterococaceae: n = 5, c = 5, m = 0, M = 1 000 in 1 g;

and

Representative samples of the manure taken during or on withdrawal from storage at the technical, biogas or composting plant must comply with the following standards:

Salmonella: absence in 25 g: n = 5; c = 0; m = 0; M = 0

where:

n

=

number of samples to be tested;

m

=

threshold value for the number of bacteria; the result is considered satisfactory if the number of bacteria in all samples does not exceed m;

M

=

maximum value for the number of bacteria; the result is considered unsatisfactory if the number of bacteria in one or more samples is M or more; and

c

=

number of samples the bacterial count of which may be between m and M, the sample still being considered acceptable if the bacterial count of the other samples is m or less.

Processed manure or processed manure products not complying with the above requirements shall be regarded as unprocessed;

(e)

They must be stored in such a way that once processed contamination or secondary infection and dampness is minimised. They must therefore be stored in:

(i)

well-sealed and insulated silos, or

(ii)

properly sealed packs (plastic bags or “big bags”).’


Top