Choose the experimental features you want to try

This document is an excerpt from the EUR-Lex website

Document 32004D0461R(01)

    Corrigendum to Commission Decision 2004/461/EC of 29 April 2004 laying down a questionnaire to be used for annual reporting on ambient air quality assessment in accordance with Council Directives 96/62/EC and 1999/30/EC and in accordance with Directives 2000/69/EC and 2002/3/EC of the European Parliament and of the Council (OJ L 156, 30.4.2004)

    OJ L 202, 7.6.2004, p. 63–91 (ES, DA, DE, EL, EN, FR, IT, NL, PT, FI, SV)

    ELI: http://data.europa.eu/eli/dec/2004/461/corrigendum/2004-06-07/oj

    7.6.2004   

    EN

    Official Journal of the European Union

    L 202/63


    Corrigendum to Commission Decision 2004/461/EC of 29 April 2004 laying down a questionnaire to be used for annual reporting on ambient air quality assessment in accordance with Council Directives 96/62/EC and 1999/30/EC and in accordance with Directives 2000/69/EC and 2002/3/EC of the European Parliament and of the Council

    ( Official Journal of the European Union L 156 of 30 April 2004 )

    Decision 2004/461/EC should read as follows:

    COMMISSION DECISION

    of 29 April 2004

    laying down a questionnaire to be used for annual reporting on ambient air quality assessment in accordance with Council Directives 96/62/EC and 1999/30/EC and in accordance with Directives 2000/69/EC and 2002/3/EC of the European Parliament and of the Council

    (notified under document number C(2004) 1714)

    (Text with EEA relevance)

    (2004/461/EC)

    THE COMMISSION OF THE EUROPEAN COMMUNITIES,

    Having regard to the Treaty establishing the European Community,

    Having regard to Council Directive 96/62/EC of 27 September 1996 on ambient air quality assessment and management (1), and in particular Article 12(1) thereof,

    Whereas:

    (1)

    Directive 96/62/EC establishes the framework for assessment and management of ambient air quality and provides that detailed arrangements are to be laid down for the reporting of information on air quality.

    (2)

    Council Directive 1999/30/EC of 22 April 1999 relating to limit values for sulphur dioxide, nitrogen dioxide and oxides of nitrogen, particulate matter and lead in ambient air (2) lays down limit values to be met on a certain target date.

    (3)

    Commission Decision 2001/839/EC of 8 November 2001 laying down a questionnaire to be used for annual reporting on ambient air quality assessment under Directives 96/62/EC and 1999/30/EC (3) provided a model on the basis of which Member States were to provide the information on air quality required according to those Directives.

    (4)

    Directive 2000/69/EC of the European Parliament and of the Council of 16 April 2000 relating to limit values for benzene and carbon monoxide in ambient air (4) lays down limit values to be met on a certain target date. Directive 2002/3/EC of the European Parliament and of the Council of 12 February 2002 relating to ozone in ambient air (5) lays down target values, long-term objectives, information and alert thresholds which create certain obligations. Regular reporting by Member States is an integral element of those Directives, read in conjunction with Directive 96/62/EC and indispensable for checking compliance with those obligations.

    (5)

    Moreover, a number of items set out in Article 11 of Directive 96/62/EC with regard to the pollutants covered by Directives 1999/30/EC, 2002/69/EC and 2002/3/EC must be reported on an annual basis.

    (6)

    According to Directive 1999/30/EC, provisions on reporting under Council Directive 80/779/EEC of 15 July 1980 on air quality limit values and guide values for sulphur dioxide and suspended particulates (6),Council Directive 82/884/EEC of 3 December 1982 on a limit value for lead in the air (7) and Council Directive 85/203/EEC of 7 March 1982 on air quality standards for nitrogen dioxide (8) are repealed with effect from 19 July 2001, although the limit values under these Directives remain in force until 2005 for Directives 80/779/EEC and 82/884/EEC, and 2010 for Directive 85/203/EEC and reporting on exceedences of these limit values continues according to Article 9(6) of Directive 1999/30/EC.

    (7)

    In order to ensure that the required information is supplied in the correct format, Member States should be required to submit it on the basis of a standardised questionnaire.

    (8)

    The questionnaire laid down by Decision 2001/839/EC should be extended to cover also the annual reporting obligations resulting from Directives 2000/69/EC and 2002/3/EC, while at the same time introducing some amendments related to Directive 1999/30/EC, which are made for clarification and in order to ensure a better assessment of the reports.

    (9)

    Decision 2001/839/EC should be replaced in the interests of clarity.

    (10)

    The measures provided for in this Decision are in accordance with the opinion of the Committee instituted by Article 12(2) of Directive 96/62/EC,

    HAS ADOPTED THIS DECISION:

    Article 1

    Member States shall use the questionnaire set out in the Annex as a basis for forwarding the information to be provided on an annual basis in accordance with Articles 11(1) and 12(1) of Directive 96/62/EC and the following provisions:

    Articles 3(1), (3) and (4), 4(1), 5(1), (2), (4) and (5), 6, 7(1), (2) and (3), and 9(6) of Directive 1999/30/EC,

    Articles 3(1), 4, and 5(1), (2), (3) and (5) of Directive 2000/69/EC and

    Articles 3(1) and (2), 4(1) and (2), 5, 9 (1) and (3), and 10 (1)(a) and (2)(b) of Directive 2002/3/EC.

    Article 2

    Decision 2001/839/EC is hereby repealed.

    Article 3

    This Decision is addressed to the Member States.

    Done at Brussels, 29 April 2004.

    For the Commission

    Margot WALLSTRÖM

    Member of the Commission

    ANNEX

    Reporting questionnaire

    on

    Council Directive 96/62/EC on ambient air quality assessment and management and Council Directive 1999/30/EC relating to limit values for sulphur dioxide, nitrogen dioxide and oxides of nitrogen, particulate matter and lead in ambient air as well as Directives 2000/69/EC relating to limit values for benzene and carbon monoxide in ambient air and 2002/3/EC relating to ozone in ambient air of the European Parliament and the Council

    MEMBER STATE: …………………………………………………………………………

    CONTACT ADDRESS: …………………………………………………………………….

    REFERENCE YEAR: ………………………………………………………………………

    COMPILATION DATE: …………………………………………………………………….

    The following forms distinguish between items that are legally required to be reported and items that are voluntarily reported by the Member State. Voluntary items are printed in italic.

    Many of the forms below contain an indefinite number of rows or columns to be filled in. In the form description, the number of empty rows or columns to be filled in is then limited to three and a dashed borderline indicates that the form should be extended as needed.

    In addition to the forms, which are to be filled in by the Member State, some tables are also provided. The tables provide information such as fixed codes that are not to be changed by the Member State.

    List of forms

    Form 1

    Contact body and address

    Form 2

    Delimitation of zones and agglomerations

    Form 3

    Stations and measuring methods used for assessment pursuant to Directives 1999/30/EC and 2000/69/EC

    Form 4

    Stations used for assessment of ozone, including nitrogen dioxide and nitrogen oxides in relation to ozone

    Form 5

    Stations and measuring methods used for the assessment of recommended volatile organic compounds

    Form 6

    Stations and measurement methods used for the assessment of other ozone precursor substances

    Form 7

    Methods used to sample and measure PM10 and PM2,5 and ozone precursor substances: optional additional codes to be defined by the Member State

    Form 8

    List of zones and agglomerations where levels exceed or do not exceed limit values or limit values plus margin of tolerance

    Form 9

    List of zones and agglomerations where levels exceed or do not exceed target values or long-term objectives for ozone

    Form 10

    List of zones and agglomerations where levels exceed or do not exceed upper assessment thresholds or lower assessment thresholds, including information on the application of supplementary assessment methods

    Form 11

    Individual exceedences of limit values and limit values plus the margin of tolerance

    Form 12

    Reasons for individual exceedences: optional additional codes to be defined by the Member State

    Form 13

    Individual exceedences of ozone thresholds

    Form 14

    Exceedence of ozone target values

    Form 15

    Annual statistics of ozone

    Form 16

    Annual average concentrations of ozone precursor substances

    Form 17

    Monitoring data on 10 minutes mean SO2 levels

    Form 18

    Monitoring data on 24-hour mean PM2,5 levels

    Form 19

    Tabular results of and methods used for supplementary assessment

    Form 20

    List of references to supplementary assessment methods referred to in Form 19

    Form 21

    Exceedence of limit values for SO2 due to natural sources

    Form 22

    Natural SO2 sources: optional additional codes to be defined by Member State

    Form 23

    Exceedence of limit values of PM10 due to natural events

    Form 24

    Exceedence of limit values of PM10 due to winter sanding

    Form 25

    Consultations on transboundary pollution

    Form 26

    Exceedences of limit values laid down in Directives 80/779/EEC, 82/884/EEC and 85/203/EEC

    Form 27

    Reasons for exceedences of limit values laid down in Directives 80/779/EEC, 82/884/EEC and 85/203/EEC: optional additional codes to be defined by the Member State

    List of tables

    Table 1

    Methods used to sample and measure PM10 and PM2,5 and ozone precursor substances: standard codes

    Table 2

    Reasons for individual exceedences: standard codes

    Table 3

    Statistical parameters to be used in concentration maps

    Table 4

    Natural SO2 sources: standard codes

    Table 5

    Natural events causing limit value exceedences for PM10: standard codes

    Form 1.   Contact body and address

    Name of the contact body

     

    Postal address

     

    Name of contact person

     

    Telephone of contact person

     

    Fax of contact person

     

    Email address of contact person

     

    Comments for clarification if needed

     

    Note to Form 1:

    The Member State is asked to fill in the contact body, and if possible, the contact person at national level, that the Commission may approach on details regarding this questionnaire if needed.

    Form 2.   Delimitation of zones and agglomerations (Directive 96/62/EC, Articles 5 and 11(1b))

     

    Zones

    Full zone name

     

     

     

    Zone code

     

     

     

    Pollutant(s), possibly separate protection targets, to which the zone applies

     

     

     

    Type (ag/nonag)

     

     

     

    Area (km 2 )

     

     

     

    Population

     

     

     

    Border coordinate pairs

     

     

     

    Border coordinate pairs

     

     

     

    Border coordinate pairs

     

     

     

    Notes to Form 2:

    (1)

    The Member State should give not only the zone name, but also a unique zone code.

    (2)

    The Member State should indicate the pollutant(s) to which the zone applies using the codes: ‘S’ for SO2, ‘N’ for NO2/NOx, ‘P’ for PM10, ‘L’ for lead, ‘B’ for benzene, ‘C’ for carbon monoxide and ‘O’ for ozone, separated by a semicolon, or ‘A’ if the zone applies to all these pollutants. If zones have been separately defined for health, ecosystem and vegetation protection, the Member State should use the following codes: ‘SH’ for SO2 health protection, ‘SE’ for SO2 ecosystem protection, ‘NH’ for NO2 health protection, ‘NV’ for NOx vegetation protection.

    (3)

    It should be indicated whether the zone is an agglomeration (code: ‘ag’) or not (code: ‘nonag’).

    (4)

    Optionally, the Member States may add the area and population size of the zone for further processing of the data at European level.

    (5)

    For further processing, the Member State is requested to fill in the zone borders in a standard format (polygons, using the geographical coordinates according to ISO 6709: geographical longitude and latitude). The Member State is requested to provide separately a map of the zones (as an electronic file or on paper) to facilitate the correct interpretation of the zone data. The Member State must provide at least either the zone borders in Form 2 or a map.

    Form 3.   Stations and measuring methods used for assessment pursuant to Directive 1999/30/EC (Annex IX) and Directive 2000/69/EC (Annex VII)

    EoI station code

    Local station code

    Zone code(s)

    Use for Directive

    Use for Directive / measuring method code for PM10 and PM2,5

    Correction factor or equation used

    Function of station

    SO2

    NO2

    NOx

    Lead

    Benzene

    CO

    PM10

    PM2,5

    PM10

    PM2,5

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

    Notes to Form 3:

    (1)

    In Form 3 and other forms in this questionnaire, ‘EoI station code’ refers to the code that is used for the exchange of data under the Exchange of Information Decision 97/101/EC. ‘Local station code’ is the code used within the Member State or region.

    (2)

    The Member State is requested to identify in the third column the zone(s) applying to ozone in which the station is located. If more than one zone is concerned, the codes should be separated by a semicolon.

    (3)

    The Member State is requested to use the columns headed by ‘SO2’, ‘NO2’, ‘NOx’, ‘Lead’, ‘Benzene’ and ‘CO’ for indicating whether the measurement is used for assessment under Directive 1999/30/EC or Directive 2000/69/EC respectively, ticking with ‘y’ if used and leaving the cell empty if not used. It should be noted that ticking NOx implies that the station is sited at a location where the limit value for vegetation applies. If the station is in the immediate vicinity of specific sources of lead as referred to in Annex IV to Directive 1999/30/EC, the Member State is requested to tick with ‘SS’ instead of ‘y’.

    (4)

    The Member State should use the columns headed by ‘PM10’ and ‘PM2,5’ for indicating whether the measurement is used for assessment under Directive 1999/30/EC and indicate at the same time which measurement method is used. If the measurement is used for assessment under the Directive, the Member State should fill in the measuring method code (see Note 5); if the measurement is not used for assessment under the Directive, the cell should be left empty. For PM2,5 levels formal assessment under Article 6 of Directive 96/62/EC is not required.

    (5)

    The measurement method code for PM10 and PM2,5 can be indicated by one of the standard codes provided by this questionnaire (see Table 1) or a code defined by the Member State that refers to a separate list of methods described by the Member State (see Form 7). The description defined by the Member State may also be a reference to a separate document added to the questionnaire. If the measurement method has been changed during the year, the Member State is requested to fill in both method codes: first the method that was used for the longest time in the year, followed by the other one, separated by a semicolon.

    (6)

    When the measurement method for PM10 or PM2,5 is not the reference method, respectively the provisional reference method, set out in Directive 1999/30/EC, Annex IX, the Member State is requested to fill in the correction factor by which the measured concentrations have been multiplied to obtain the concentrations reported in this questionnaire or to fill in the corresponding correction equation. If a correction equation has been applied, a free format can be used in which the measured concentration should be denoted by ‘CM’ and the reported concentration by ‘CR’, preferably using the format CR = f(CM). If the results of the method have been demonstrated to be equivalent without the application of a correction, the Member State is requested to indicate this by entering the value ‘1’ for the correction factor or equation.

    (7)

    ‘Function of station’ indicates whether the station is sited at a location where (a) the limit values for health, the SO2 limit value for ecosystems and the NOx limit value for vegetation apply (code ‘HEV’), (b) only the limit values for health and the SO2 limit value for ecosystems apply (code ‘HE’), (c) only the limit value for health and the NOx limit value for vegetation apply (code ‘HV’) or (d) only the limit values for health apply (code ‘H’).

    Form 4.   Stations used for assessment of ozone, including nitrogen dioxide and nitrogen oxides in relation to ozone (Directive 2002/3/EC, Annex III, IV, VI)

    EoI station code

    Local station code

    Zone code

    Type of station

    Use in relation to Directive 2002/3/EC

    O3

    NO2

    NOx

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

    Notes to Form 4:

    (1)

    The Member State is requested to identify in the third column the zone in which the station is located.

    (2)

    The Member State should use the columns headed by ‘O3’, ‘NO2’ and ‘NOx’ for indicating whether the measurement is used for assessment under Directive 2002/3/EC, ticking with ‘y’ if used and leaving the cell empty if not used. The column headed by ‘NO2’ indicates measurement as mentioned in Directive 2002/3/EC, Article 9(1), the column headed by ‘NOx’ indicates measurement as mentioned in Directive 2002/3/EC, Article 9(3).

    (3)

    ‘Type of station’ is defined according to Directive 2002/3/EC, Annex IV. The following codes should be used: ‘U’ for urban, ‘S’ for suburban, ‘R’ for rural and ‘RB’ for rural background.

    Form 5.   Stations and measurement methods used for the assessment of recommended volatile organic compounds (Directive 2002/3/EC, Annex VI)

     

    Stations

    EoI station code

     

     

     

    Local station code

     

     

     

    Zone code applying to ozone

     

     

     

    Ethane

     

     

     

    Ethylene

     

     

     

    Acetylene

     

     

     

    Propane

     

     

     

    Propene

     

     

     

    n-Butane

     

     

     

    i-Butane

     

     

     

    1-Butene

     

     

     

    trans-2-Butene

     

     

     

    cis-2-Butene

     

     

     

    1.3-Butadiene

     

     

     

    n-Pentane

     

     

     

    i-Pentane

     

     

     

    1-Pentene

     

     

     

    2-Pentene

     

     

     

    Isoprene

     

     

     

    n-Hexane

     

     

     

    i-Hexane

     

     

     

    n-Heptane

     

     

     

    n-Octane

     

     

     

    i-Octane

     

     

     

    Benzene

     

     

     

    Toluene

     

     

     

    Ethyl benzene

     

     

     

    m+p-Xylene

     

     

     

    o-Xylene

     

     

     

    1,2,4-Trimeth.benzene

     

     

     

    1,2,3-Trimeth.benzene

     

     

     

    1,3,5-Trimeth.benzene

     

     

     

    Formaldehyde

     

     

     

    Total non-methane hydrocarbons

     

     

     

    Notes to Form 5:

    (1)

    The Member State should indicate in Form 5 for each station and for each substance assessed pursuant to Directive 2002/3/EC, Article 9(3), the measurement method by one of the standard codes provided by this questionnaire (see Table 1) or a code defined by the Member State (Form 7).

    (2)

    Whereas reporting obligations of ozone precursor substances must include ‘appropriate volatile organic compounds’, the list presented in Form 5 is only a recommendation according to Annex VI of Directive 2002/3/EC.

    Form 6.   Stations and measurement methods used for the assessment of other ozone precursor substances (Directive 2002/3/EC, Annex VI)

     

    Stations

    EoI station code

     

     

     

    Local station code

     

     

     

    Zone code applying to ozone

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

    Note to Form 6:

    In the leftmost column of Form 6 the Member State should indicate ozone precursor substances assessed pursuant to Directive 2002/3/EC, Article 9(3), other than those described in Form 5. The Member State should indicate in Form 6 for each station and each substance the measurement method by one of the standard codes provided by this questionnaire (see Table 1) or a code defined by the Member State (Form 7). Note 2 of Form 5 applies for Form 6 accordingly.

    Table 1.   Methods used to sample and measure PM10, PM2,5 and ozone precursor substances: standard codes (1)

    Method code

    Description

    M1

    PM10 or PM2,5: Beta-absorption

    M2

    PM10 or PM2,5: Gravimetry for PM10 and/or PM2,5 — continuous measurement

    M2dxxx

    PM10 or PM2,5: Gravimetry for PM10 and/or PM2,5 — random measurement; xxx should be the number of measured days. Example: random sampling on 180 days of the year is indicated by M2d180.

    M3

    PM10 or PM2,5: Oscillating microbalance for PM10 and/or PM2,5

    M4

    Lumped sum NMHC: automated, semi-continuous monitoring, NMHC calculated from Total HC minus methane; FID

    M5

    Lumped sum NMHC: automated semi-continuous monitoring, after chromatographic separation of NMHC from methane; FID

    M6

    Individual VOC: automated sampling and on line analysis; cryogenic sample pre-concentration, GC/FID (MS) detection

    M7

    Individual VOC: whole air canister sampling; off line analysis by GC/FID (MS)

    M8

    Individual VOC: active solid adsorbent sampling; off line analysis by GC/FID (MS) after solvent or thermal desorption

    M9

    Individual VOC: diffusive solid adsorbent sampling; off line analysis by GC/FID(MS) after solvent or thermal desorption

    M10subcode 2)

    Formaldehyde: sampling with DNPH; off line analysis of hydrazones by HPLC with UV detection (360 nm).

    M11subcode 1

    Formaldehyde: sampling with HMP; off line analysis of oxazolidine by GC-NPD

    M12subcode 2

    Formaldehyde: sampling withy bisulfite and chromotropic acid; off line analysis by spectrometry (580 nm)

    1)

    DNPH: Dinitrophenylhydrazine; FID: Flame Ionisation Detection; GC: Gas Chromatography; HC: hydrocarbons; HMP: Hydroxy-methyl-piperidine; HPLC: High Pressure Liquid Chromatography; MS: Mass Spectrometer; NMHC: Non-methane hydrocarbons; NPD: Nitrogen and Phosphorus Detector; UV: Ultra Violet; VOC: Volatile Organic Compounds.

    2)

    For sampling with impinger: use subcode ‘IM’; active sampling on sorbent: subcode ‘AS’; diffusive sampling: subcode ‘DI’. Example: ‘M10AS’.

    Form 7.   Methods used to sample and measure PM10, PM2,5 and ozone precursor substances: optional additional codes to be defined by the Member State (Directive 1999/30/EC, Annex IX, and Directive 2002/3/EC, Annex VI)

    Method code

    Description

     

     

     

     

     

     

    Form 8.   List of zones and agglomerations where levels exceed or do not exceed limit values (LV) or limit values plus margin of tolerance (LV + MOT) (Directive 96/62/EC Articles 8, 9 and 11, Directive 1999/30/EC Annexes I, II, III and IV, Directive 2000/69/EC Annexes I and II)

    Form 8a.   List of zones in relation to limit value exceedences for SO2

    Zone code

    LV for health (1hr mean)

    LV for health (24hr mean)

    LV for ecosystems(annual mean)

    LV for ecosystems(winter mean)

    >LV + MOT

    ≤LV + MOT; >LV

    ≤LV

    >LV

    ≤LV

    >LV

    ≤LV

    >LV

    ≤LV

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

    Form 8b.   List of zones in relation to limit value exceedences for NO2/NOx

    Zone code

    LV for health (1hr mean)

    LV for health (annual mean)

    LV for vegetation

    >LV + MOT

    ≤LV + MOT; >LV

    ≤LV

    >LV + MOT

    ≤LV + MOT; >LV

    ≤LV

    >LV

    ≤LV

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

    Form 8c.   List of zones in relation to limit value exceedences for PM10

    Zone code

    LV (24hr mean)Stage 1

    LV (annual mean)Stage 1

    LV (24hr mean)Stage 2

    LV (annual mean)Stage 2

    >LV + MOT

    ≤LV + MOT;>LV

    ≤LV

    >LV + MOT

    ≤LV + MOT;>LV

    ≤LV

    >LV

    ≤LV

    >LV + MOT

    ≤LV + MOT;>LV

    ≤LV

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

    Form 8d.   List of zones in relation to limit value exceedences for lead

    Zone code

    LV

    >LV + MOT

    ≤LV + MOT; >LV

    ≤LV

    SS

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

    Form 8e.   List of zones in relation to limit value exceedences for benzene

    Zone code

    LV

    >LV + MOT

    ≤LV + MOT; >LV

    ≤LV

    Art 3(2)

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

    Form 8f.   List of zones in relation to limit value for carbon monoxide

    Zone code

    LV

    >LV + MOT

    ≤LV + MOT; >LV

    ≤LV

     

     

     

     

     

     

     

     

     

     

     

     

    Notes to Form 8:

    (1)

    The column headings have the following meaning:

    >LV + MOT:

    above the limit value plus the margin of tolerance;

    ≤LV + MOT; >LV:

    below or equal to the limit value plus the margin of tolerance but above the limit value;

    ≤LV:

    below or equal to the limit value;

    >LV:

    above the limit value;

    SS:

    due to specific sources, see Note 7.

    Art 3(2)

    extension period granted, see Note 8.

    (2)

    ‘>LV + MOT’ should be read as ‘>LV’ when the margin of tolerance has decreased to 0 %. In that case the column headed by ‘LV + MOT; >LV’ should not be used.

    (3)

    If the column heading describes the status of the zone, tick with ‘y’.

    (4)

    If exceedence has been concluded from model calculations solely, tick with ‘m’ instead of ‘y’.

    (5)

    For thresholds for ecosystems and vegetation, tick only when exceedence occurred in areas where these limit values apply. For zones in which no areas exist where these limit values apply, tick column ‘LV’ with ‘n’.

    (6)

    The winter mean is defined as the period from 1 October of the year preceding the reference year to 31 March of the reference year.

    (7)

    If the exceedence status indicated in Form 8d is solely due to exceedence in an area in the immediate vicinity of specific sources designated according to Annex IV to Directive 1999/30/EC, the Member State is requested to indicate this by ticking column ‘SS’ with ‘y’.

    (8)

    In Form 8e, ‘LV’ refers to the limit value specified in Directive 2000/69/EC Annex I. For zones for which the Commission has granted an extension period for benzene according to Article 3(2) to Directive 2000/69/EC, the Member State is requested to indicate this by ticking column ‘Art3(2)’ with ‘y’.

    Form 9.   List of zones and agglomerations where levels exceed or do not exceed target values or long-term objectives for ozone (Directive 2002/3/EC, Annex I)

    Zone code

    Thresholds for health

    Thresholds for vegetation

    >TV

    ≤TV; >LTO

    ≤LTO

    >TV

    ≤TV; >LTO

    ≤LTO

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

    Notes to Form 9:

    The column headings have the following meaning:

    >TV:

    above the target value for ozone;

    ≤TV; >LTO:

    below or equal to the target value but above the long-term objective for ozone;

    ≤LTO:

    below or equal to the long-term objective for ozone.

    (1)

    If the column heading describes the status of the zone, tick with ‘y’.

    (2)

    If exceedence has been concluded from model calculations solely, tick with ‘m’ instead of ‘y’.

    (3)

    The status is to be assessed over three years for the health target value and over five years for the vegetation target value.

    Form 10.   List of zones and agglomerations where levels exceed or do not exceed upper assessment thresholds (UAT) or lower assessment thresholds (LAT), including information on the application of supplementary assessment methods (Directive 96/62/EC Article 6, Directive 1999/30/EC Article 7(3) and Annex V, Directive 2000/69/EC Article 5(3) and Annex III, Directive 2002/3/EC Article 9(1) and Annex VII)

    Form 10a.   List of zones in relation to assessment threshold exceedences and supplementary assessment for SO2

    Zone code

    UAT and LAT related to health LV(24hr mean)

    UAT and LAT related to ecosystems LV(winter mean)

    SA

    >UAT

    ≤UAT; >LAT

    ≤LAT

    >UAT

    ≤UAT; >LAT

    ≤LAT

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

    Form 10b.   List of zones in relation to assessment threshold exceedences and supplementary assessment for NO2/NOx

    Zone code

    UAT and LAT related to health LV(1hr mean)

    UAT and LAT related to health LV(annual mean)

    UAT and LAT related to vegetationLV

    SA

    >UAT

    ≤UAT; >LAT

    ≤LAT

    >UAT

    ≤UAT; >LAT

    ≤LAT

    >UAT

    ≤UAT; >LAT

    ≤LAT

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

    Form 10c.   List of zones in relation to assessment threshold exceedences and supplementary assessment for PM10

    Zone code

    UAT and LAT (24hr mean)

    UAT and LAT (annual mean)

    SA

    >UAT

    ≤UAT; >LAT

    ≤LAT

    >UAT

    ≤UAT; >LAT

    ≤LAT

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

    Form 10d.   List of zones in relation to assessment threshold exceedences and supplementary assessment for lead

    Zone code

    UAT and LAT

    SA

    >UAT

    ≤ UAT; >LAT

    ≤ LAT

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

    Form 10e.   List of zones in relation to assessment threshold exceedences and supplementary assessment for benzene

    Zone code

    UAT and LAT

    SA

    >UAT

    UAT; >LAT

    LAT

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

    Form 10f.   List of zones in relation to assessment threshold exceedences and supplementary assessment for carbon monoxide

    Zone code

    UAT and LAT

    SA

    >UAT

    UAT; >LAT

    LAT

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

    Form 10g.   List of zones in relation to supplementary assessment for ozone

    Zone code

    SA

     

     

     

     

     

     

    Notes to Form 10:

    (1)

    The column headings have the following meaning:

    >UAT:

    above the upper assessment threshold;

    ≤UAT; >LAT:

    below or equal to upper assessment threshold, but above the lower assessment threshold;

    ≤LAT:

    below or equal to the lower assessment threshold;

    SA:

    supplementary assessment, see Note 6.

    (2)

    If the column heading describes the status of the zone, tick with ‘y’.

    (3)

    If exceedence has been concluded from model calculations solely, tick with ‘m’ instead of ‘y’.

    (4)

    For thresholds for ecosystems, tick only when exceedence occurred in areas where the limit values for ecosystems apply.

    (5)

    Exceedence of UAT and LAT is judged on the basis of the reference year and the preceding four years in accordance with the specification in Annex V(II) to Directive 1999/30/EC and Annex III(II) to Directive 2000/69/EC respectively.

    (6)

    The Member State is requested to indicate in the column ‘SA’ whether information from fixed measuring stations has been supplemented by information from other sources as referred to in Article 7(3) of Directive 1999/30/EC, Article 5(3) of Directive 2000/69/EC and Article 9(1) of Directive 2002/3/EC.

    Form 11.   Individual exceedences of limit values and limit values plus margin of tolerance (MOT) (Directive 96/62/EC Article 11(1)(a)(i) and (ii), Directive 1999/30/EC Annexes I, II, IV and V and Directive 2000/69/EC Annexes I and II)

    Form 11a.   Exceedence of SO2 limit value plus MOT for health (1hr mean)

    Zone code

    EoI station code

    Month

    Day of month

    Hour

    Level (mg/m3)

    Reason code(s)

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

    Form 11b.   Exceedence of SO2 limit value for health (24hr mean)

    Zone code

    EoI station code

    Month

    Day of month

    Level (mg/m3)

    Reason code(s)

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

    Form 11c.   Exceedence of SO2 limit value for ecosystems (annual mean)

    Zone code

    EoI station code

    Level (mg/m3)

    Reason code(s)

     

     

     

     

     

     

     

     

     

     

     

     

    Form 11d.   Exceedence of SO2 limit value for ecosystems (winter mean)

    Zone code

    EoI station code

    Level (mg/m3)

    Reason code(s)

     

     

     

     

     

     

     

     

     

     

     

     

    Form 11e.   Exceedence of NO2 limit value plus MOT for health (1hr mean)

    Zone code

    EoI station code

    Month

    Day of month

    Hour

    Level (mg/m3)

    Reason code(s)

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

    Form 11f.   Exceedence of NO2 limit value plus MOT for health (annual mean)

    Zone code

    EoI station code

    Level (mg/m3)

    Reason code(s)

     

     

     

     

     

     

     

     

     

     

     

     

    Form 11g.   Exceedence of NOx limit value for vegetation

    Zone code

    EoI station code

    Level (mg/m3)

    Reason code(s)

     

     

     

     

     

     

     

     

     

     

     

     

    Form 11h.   Exceedence of PM10 limit value plus MOT (stage 1; 24hr mean)

    Zone code

    EoI station code

    Month

    Day of month

    Level (mg/m3)

    Reason code(s)

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

    Form 11i.   Exceedence of PM10 limit value plus MOT (stage 1; annual mean)

    Zone code

    EoI station code

    Level (mg/m3)

    Reason code(s)

     

     

     

     

     

     

     

     

     

     

     

     

    Form 11j.   Exceedence of lead limit value plus MOT

    Zone code

    EoI station code

    Level (mg/m3)

    Reason code(s)

     

     

     

     

     

     

     

     

     

     

     

     

    Form 11k.   Exceedence of benzene limit value plus MOT

    Zone code

    EoI station code

    Level (mg/m3)

    Reason code(s)

    Article 3(2)

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

    Form 11l.   Exceedence of carbon monoxide limit value plus MOT

    Zone code

    EoI station code

    Month

    Day of month

    Level (mg/m3)

    Reason code(s)

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

    Notes to Form 11:

    (1)

    Identifying the station by filling in the EoI station code is not mandatory, but highly recommended.

    (2)

    The phrase ‘limit value plus MOT’ should be read as ‘limit value’ when the margin of tolerance has decreased to 0 %.

    (3)

    ‘Month’ and ‘Day of month’ should be indicated by its number (1-12 and 1-31 respectively). ‘Hour’ should be indicated as ‘1’ for the hour between 00:00 and 01:00 etc.

    (4)

    All exceedences of the limit value plus the margin of tolerance at a station are reported if the total number of exceedences is above the allowed number. If the total number of exceedences at a station is lower than or equal to the allowed number, no exceedences are reported.

    (5)

    The reason of exceedence can be indicated by one or several standard codes provided by this questionnaire (see Table 2) or a code defined by the Member State that refers to a separate list of reasons described by the Member State (Form 12). If more than one reason is indicated, the codes should be separated by a semicolon. The description given by the Member State could also be a reference to a separate document added to the questionnaire.

    (6)

    For exceedences in zones for which the Commission has, according to Directive 2000/69/EC Article 3(2), granted a time-limited extension, the Member State is requested to enter ‘y’ in the column headed by ‘Article 3(2)’.

    (7)

    If no exceedences above the number of allowed exceedences have been observed, the Member State is requested to enter ‘No exceedences’ in the left cell of the first row.

    Table 2.   Reasons for individual exceedences: standard codes

    Reason code

    Description

    S1

    Heavily trafficked urban centre

    S2

    Proximity to a major road

    S3

    Local industry including power production

    S4

    Quarrying or mining activities

    S5

    Domestic heating

    S6

    Accidental emission from industrial source

    S7

    Accidental emission from non-industrial source

    S8

    Natural source(s) or natural event(s)

    S9

    Winter sanding of roads

    S10

    Transport of air pollution originating from sources outside the Member State

    S11

    Local petrol station

    S12

    Parking facility

    S13

    Benzene storage

    Form 12.   Reasons for individual exceedences: optional additional codes to be defined by the Member State (Directive 96/62/EC Article 11(1) (a) (i) and (ii)) and Directive 1999/30/EC Annexes I, II, IV and V, Directive 2000/69/EC Annexes I and II)

    Reason code

    Description

     

     

     

     

     

     

    Form 13.   Individual exceedences of ozone thresholds (Directive 2002/3/EC, Article 10(2b) and Annex III)

    Form 13a.   Exceedence of ozone information threshold value

    Zone code

    EoI station code

    Month

    Day of month

    Maximum 1-hour mean ozone concentration (mg/m3) during exceedence period

    Reason code(s)

    Starting time of the exceedence period

    Total number of exceedence hours

    1-hour mean NO2 concentration (mg/m3) during maximum ozone concentration

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

    Form 13b.   Exceedence of ozone alert threshold value

    Zone code

    EoI station code

    Month

    Day of month

    Maximum 1-hour mean ozone concentration (mg/m3) during exceedence period

    Reason code(s)

    Starting time of the exceedence period

    Total number of exceedence hours

    1-hour mean NO2 concentration (mg/m3) during maximum ozone concentration

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

    Form 13c.   Exceedence of ozone long term objective for health protection

    Zone code

    EoI station code

    Month

    Day of month

    Daily maximum 8-hour mean concentration (mg/m3)

    Reason code(s)

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

    Notes to Form 13:

    (1)

    For ‘Reason code(s)’ see Note 5 to Form 11.

    (2)

    13a and 13b: An exceedence period is a continuous period on a single calendar day during which a threshold was continuously exceeded. A period cannot include hours of more than a single calendar day. If more than one exceedence period occurs on a calendar day, each period must be reported separately.

    (3)

    The requirement to report NO2 measurements is restricted to a minimum of 50 % of the O3 sampling point (Article 9(1) of Directive 2003/3/EC).

    Form 14.   Exceedence of ozone target values (Directive 2002/3/EC, Article 10(2b) and Annex III)

    Form 14a.   Stations where the ozone target value for human health is exceeded

    Zone code

    EoI station code

    Number of exceedence days per calendar year averaged over three years

    If a full and consecutive set of data of 3 years was not used:calendar year(s) taken into account

     

     

     

     

     

     

     

     

     

     

     

     

    Form 14b.   Stations where the ozone target value for vegetation is exceeded

    Zone code

    EoI station code

    AOT40 (May-July) (mg/m3) averaged over five years

    If a full and consecutive set of data of five years was not used: calendar years taken into account (at least 3 years)

     

     

     

     

     

     

     

     

     

     

     

     

    Notes to Form 14:

    (1)

    The data should be consistent with the requirements in Directive 2002/3/EC, Annex I(II), footnotes b and c. If the three or five-year averages could not be determined on the basis of a full and consecutive set of annual data, each year taken into account in the calculation should be indicated in the rightmost column, separated by a semicolon from other years.

    (2)

    Form 14a: All exceedences of the target value at a station are reported if the total number of exceedences is above the allowed number. If the total number of exceedences at a station is lower than or equal to the allowed number, no exceedences are reported.

    Form 15.   Annual statistics of ozone (Directive 2002/3/EC, Article 10(2b) and Annex III)

    Zone code

    EoI station code

    AOT40 for vegetation protection (μg/m3.h)

    AOT40 for forest protection (μg/m3.h)

    Annual average

    Value

    Number of valid data

    Value

    Number of valid data

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

    Note to Form 15:

    The number of valid data for AOT40 refers to the hourly data available in the relevant period (for vegetation protection between 8:00 and 20:00 from May to July, maximum 1 104 hours; for forest protection between 8:00 and 20:00 from April-September, maximum 2 196 hours).

    Form 16.   Annual average concentrations of ozone precursor substances (Directive 2002/3/EC Article 10(2b) and Annex VI)

    Form 16a.   Annual average concentrations of recommended volatile organic compounds

     

    Stations

    EoI station code

     

     

     

    Ethane

     

     

     

    Ethylene

     

     

     

    Acetylene

     

     

     

    Propane

     

     

     

    Propene

     

     

     

    n-Butane

     

     

     

    i-Butane

     

     

     

    1-Butene

     

     

     

    trans-2-Butene

     

     

     

    cis-2-Butene

     

     

     

    1.3-Butadiene

     

     

     

    n-Pentane

     

     

     

    i-Pentane

     

     

     

    1-Pentene

     

     

     

    2-Pentene

     

     

     

    Isoprene

     

     

     

    n-Hexane

     

     

     

    i-Hexane

     

     

     

    n-Heptane

     

     

     

    n-Octane

     

     

     

    i-Octane

     

     

     

    Benzene

     

     

     

    Toluene

     

     

     

    Ethyl benzene

     

     

     

    m+p-Xylene

     

     

     

    o-Xylene

     

     

     

    1,2,4-Trimeth.benzene

     

     

     

    1,2,3-Trimeth.benzene

     

     

     

    1,3,5-Trimeth.benzene

     

     

     

    Formaldehyde

     

     

     

    Total non-methane hydrocarbons

     

     

     

    Form 16b.   Annual average concentrations of other ozone precursor substances

     

    Stations

    EoI station code

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

    Notes to Form 16:

    (1)

    In the first line of Form 16a the Member State should report the EoI station codes and in the following lines the annual average concentration of ozone precursor substances assessed under Directive 2002/3/EC Article 9(3).

    (2)

    For ozone precursor substances other than those described in Form 16a and assessed under Directive 2002/3/EC Article 9(3), the Member State should fill in Form 16b following the structure of Form 16a, indicating these other substances in the first column.

    (3)

    Whereas reporting obligations of ozone precursor substances must include ‘appropriate volatile organic compounds’, the list presented in Form 16a is only a recommendation according to Annex VI of Directive 2002/3/EC.

    (4)

    Concentrations that have been reported under the Exchange of Information Decision 97/101/EC should not be reported in Form 16.

    Form 17.   Monitoring data on 10 minutes mean SO2 levels (Directive 1999/30/EC Article 3(3))

    EoI station code

    The number of concentrations averaged over 10 minutes which have exceeded

    The number of days within the calendar year on which such exceedences occurred

    The number of the days referred to in the previous column, on which hourly concentrations of sulphur dioxide simultaneously exceeded 350 mg/m3

    The maximum concentration averaged over 10 minutes recorded (mg/m3)

    Date on which the maximum concentration occurred

    Month

    Day of month

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

    Note to Form 17:

    Where it is not practicable for a Member State to record data on concentrations of sulphur dioxide averaged over 10 minutes this form does not have to be completed.

    Form 18.   Monitoring data on 24hr mean PM2,5 levels (Directive 1999/30/EC Article 5(2))

    EoI station code

    Arithmetic mean (μg/m3)

    Median (μg/m3)

    98 percentile (μg/m3)

    Maximum concentration (μg/m3)

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

    Form 19.   Tabular results of and methods used for supplementary assessment (Directive 1999/30/EC Article 7(3) and Annex VIII(II), Directive 2000/69/EC Article 5(3) and Annex VI(II) and Directive 2002/3/EC Article 9(1) and Annex VII(II))

    Form 19a.   Results of and methods used for supplementary assessment for SO2

    Zone code

    Above LV for health (1hr mean)

    Above LV for health (24hr mean)

    Above LV for ecosystems

    Above LV for ecosystems (winter mean)

    Area

    Population exposed

    Area

    Population exposed

    Area

    Ecosystem area exposed

    Area

    Ecosystem area exposed

    km2

    Method

    Number

    Method

    km2

    Method

    Number

    Method

    km2

    Method

    km2

    Method

    km2

    Method

    km2

    Method

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

    Form 19b.   Results of and methods used for supplementary assessment for NO2/NOx

    Zone code

    Above LV for health (1hr mean)

    Above LV for health (annual mean)

    Above LV for vegetation

    Area

    Road length

    Population exposed

    Area

    Road length

    Population exposed

    Area

    Vegetation area exposed

    km2

    Method

    km

    Method

    No

    Method

    km2

    Method

    km

    Method

    No

    Method

    km2

    Method

    km2

    Method

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

    Form 19c.1   Results of and methods used for supplementary assessment for PM10 (Stage 1)

    Zone code

    Above LV (24hr mean)

    Above LV (annual mean)

    Area

    Road length

    Population exposed

    Area

    Road length

    Population exposed

     

    km2

    Method

    km

    Method

    Number

    Method

    km2

    Method

    km

    Method

    Number

    Method

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

    Form 19c.2   Results of and methods used for supplementary assessment for PM10 (Stage 2)

    Zone code

    Above LV (24hr mean)

    Above LV (annual mean)

    Area

    Road length

    Population exposed

    Area

    Road length

    Population exposed

    km2

    Method

    km

    Method

    No

    Method

    km2

    Method

    km

    Method

    No

    Method

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

    Form 19d.   Results of and methods used for supplementary assessment for lead

    Zone code

    Above LV

    Area

    Road length

    Population exposed

    km2

    Method

    km

    Method

    No

    Method

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

    Form 19e.   Results of and methods used for supplementary assessment for benzene

    Zone code

    Above LV

    Area

    Road length

    Population exposed

    km2

    Method

    km

    Method

    No

    Method

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

    Form 19f.   Results of and methods used for supplementary assessment for carbon monoxide

    Zone code

    Above LV

    Area

    Road length

    Population exposed

    km2

    Method

    km

    Method

    No

    Method

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

    Form 19g.   Results of and methods used for supplementary assessment for ozone

    Zone code

    Above TV for health

    Above LTO for health

    Above TV for ecosystems

    Above LTO for ecosystems

    Area

    Population exposed

    Area

    Population exposed

    Area

    Ecosystem area exposed

    Area

    Ecosystem area exposed

    km2

    Method

    No

    Method

    km2

    Method

    No

    Method

    km2

    Method

    km2

    Method

    km2

    Method

    km2

    Method

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

    Notes to Form 19:

    (1)

    ‘Method’ is a code defined by the Member State that refers to a separate list of references (Form 20) on publications or reports in which the supplementary method is documented. Form 20 is part of the report to the Commission; the publications or reports referred to are not to be sent to the Commission.

    (2)

    Form 19 can be complemented by maps showing concentration distributions. It is recommended that the Member State, if possible, compiles maps showing concentration distributions within each zone and agglomeration. It is recommended to provide concentration iso-lines of the parameters in which the air quality thresholds are expressed (see Table 3) using iso-lines at intervals of 10 % of the threshold.

    (3)

    The information should refer to the appropriate averaging period for the long-term objectives (one year), the target value for health (three years) and the target value for vegetation (five years).

    Table 3   Statistical parameters to be used in concentration maps

    Pollutant

    Parameters

    SO2

    99,7 percentile of 1h means; 98,9 percentile of 24h means; annual mean; winter mean

    NO2

    99,8 percentile of 1h means

    NO2/NOx

    Annual mean

    PM10

    90,1 percentile of 24h means (stage 1); 97,8 percentile of 24h means (stage 2)

    PM10 and PM2,5

    Annual mean

    Lead

    Annual mean

    Benzene

    Annual mean

    Carbon monoxide

    Maximum daily eight-hour mean

    Ozone

    92,9 percentile of daily eight-hour means averaged over the last three years; maximum daily eight-hour mean in reference year; AOT40 (May to July) averaged over the last five years

    Form 20.   List of references to supplementary assessment methods referred to in Form 19 (Directive 1999/30/EC Article 7(3) and Annex VIII(II))

    Method

    Full reference

     

     

     

     

     

     

    Form 21.   Exceedence of limit values of SO2 due to natural sources (Directive 1999/30/EC Article 3(4))

    Form 21a.   SO2 limit value for health (1hr mean)

    Zone

    EoI station code

    Number of exceedences measured

    Natural source code(s)

    Estimated number of exceedences after subtraction of natural contribution

    Reference to justification

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

    Form 21b.   SO2 limit value for health (24hr mean)

    Zone

    EoI station code

    Number of exceedences measured

    Natural source code(s)

    Estimated number of exceedences after subtraction of natural contribution

    Reference to justification

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

    Form 21c.   SO2 limit value for ecosystems (annual mean)

    Zone

    EoI station code

    Annual mean concentration

    Natural source code(s)

    Estimated annual mean concentration after subtraction of natural contribution

    Reference to justification

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

    Form 21d.   SO2 limit value for ecosystems (winter mean)

    Zone

    EoI station code

    Winter mean concentration

    Natural source code(s)

    Estimated annual mean concentration after subtraction of natural contribution

    Reference to justification

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

    Note to Form 21:

    The natural source can be indicated by one or several standard codes provided by this questionnaire (see Table 4) or a code defined by the Member State that refers to a separate list of natural sources described by the Member State (Form 22)).

    Table 4.   Natural SO2 sources: standard codes

    Natural source code

    Description

    A1

    Volcanism inside the Member State

    A2

    Volcanism outside the Member State

    B

    Coastal wetlands

    C1

    Natural fires inside the Member State

    C2

    Natural fires outside the Member State

    Form 22.   Natural SO2 sources: optional additional codes to be defined by Member State (Directive 1999/30/EC Article 3(4))

    Natural source code

    Description

     

     

     

     

     

     

    Form 23.   Exceedence of limit values of PM10 due to natural events (Directive 1999/30/EC Article 5(4))

    Form 23a.   Contribution of natural events to exceedence of the PM10 limit value (stage 1; 24hr mean)

    Zone

    EoI station code

    Number of exceedences measured

    Natural event code(s)

    Estimated number of exceedences after subtraction of natural contribution

    Reference to justification

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

    Form 23b.   Contribution of natural events to exceedence of the PM10 limit value (stage 1; annual mean)

    Zone

    EoI station code

    Annual mean concentration

    Natural event code(s)

    Estimated annual mean concentration after subtraction of natural contribution

    Reference to justification

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

    Note to Form 23:

    The natural event can be indicated by one or several standard codes provided by this questionnaire (see Table 5).

    Table 5   Natural events causing limit value exceedences for PM10: standard codes

    Natural event code

    Description

    A1

    Volcanic eruption inside the Member State

    A2

    Volcanic eruption outside the Member State

    B1

    Seismic activity inside the Member State

    B2

    Seismic activity outside the Member State

    C1

    Geothermal activity inside the Member State

    C2

    Geothermal activity outside the Member State

    D1

    Wild-land fire inside the Member State

    D2

    Wild-land fire outside the Member State

    E1

    High wind event inside the Member State

    E2

    High wind event outside the Member State

    F1

    Atmospheric resuspension inside the Member State

    F2

    Atmospheric resuspension outside the Member State

    G1

    Transport of natural particles from dry regions inside the Member State

    G2

    Transport of natural particles from dry regions outside the Member State

    Form 24.   Exceedence of limit values of PM10 due to winter sanding (Directive 1999/30/EC Article 5(5))

    Form 24a.   Contribution of winter sanding to exceedence of the PM10 limit value (stage 1; 24hr mean)

    Zone

    EoI station code

    Number of exceedences measured

    Estimated number of exceedences after subtraction of winter sanding contribution

    Reference to justification

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

    Form 24b.   Contribution of winter sanding to exceedence of the PM10 limit value (stage 1; annual mean)

    Zone

    EoI station code

    Annual mean

    Estimated annual mean concentration after subtraction of winter sanding contribution

    Reference to justification

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

    Form 25.   Consultations on transboundary pollution (Directive 96/62/EC Article 8(6))

    Form 25a.   General

    Has the Member State consulted other Member States on significant air pollution originating in other Member States? Please tick with‘y’if yes or‘n’if no:

    (yorn)

    Form 25b.   Specification per Member State

    If yes, please:

    AT

    BE

    CY

    CZ

    DE

    DK

    EE

    ES

    FI

    FR

    GR

    HU

    IE

    IT

    LT

    LU

    LV

    MT

    NL

    PL

    PT

    SE

    SK

    SI

    UK

    tick the MS or country concerned

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

    tick if the agenda(s) of the consultations has/have been added to this report

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

    tick if the minutes of the consultations have been added to this report

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

    Note to Form 25b:

    Tick only if yes, using ‘y’.

    Form 26.   Exceedences of limit values laid down in Directives 80/779/EEC, 82/884/EEC and 85/203/EEC to be reported pursuant to Directive 1999/30/EC Article 9(6))

    Pollutant

    Limit value exceeded

    Monitoring method used

    EoI station code

    Measured value (mg/m3)

    Reason code(s)

    Measures taken

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

    Notes to Form 26:

    (1)

    The numerical value of the limit value exceeded should be indicated in the second column.

    (2)

    For SO2 and suspended particulates it should be indicated whether the black-smoke or the gravimetric method was used.

    (3)

    Identifying the station is not mandatory, but highly recommended.

    (4)

    The reason for exceedence can be indicated by one or several standard codes provided by this questionnaire (see Table 5) or a code defined by the Member State that refers to a separate list of reasons described by the Member State (Form 27). If more than one reason is indicated, the codes should be separated by a semicolon. The description given by the Member State could also be a reference to a separate document added to the questionnaire.

    Form 27.   Reasons for exceedences of limit values laid down in Directives 80/779/EEC, 82/884/EEC and 85/203/EEC: optional additional codes to be defined by the Member State (Directive 1999/30/EC Article 9(6))

    Reason code

    Description

     

     

     

     

     

     


    (1)   OJ L 296, 21.11.1996, p. 55. Directive as amended by Regulation (EC) No 1882/2003 of the European Parliament and of the Council (OJ L 284, 31.10.2003, p. 1).

    (2)   OJ L 163, 29.6.1999, p. 41. Directive as amended by Commission Decision 2001/744/EC (OJ L 278, 23.10.2001, p. 35).

    (3)   OJ L 319, 4.12.2001, p. 45.

    (4)   OJ L 313, 13.12.2000, p. 12.

    (5)   OJ L 67, 9.3.2002, p. 14.

    (6)   OJ L 229, 30.8.1980, p. 30.

    (7)   OJ L 378, 31.12.1982, p. 15.

    (8)   OJ L 87, 27.3.1985, p. 1.


    Top