Access to European Union law
<a href="https://eur-lex.europa.eu/content/help/eurlex-content/experimental-features.html" target="_blank">More about the experimental features corner</a>
Choose the experimental features you want to try
EUR-Lex
Access to European Union law

This document is an excerpt from the EUR-Lex website

You are here
Use quotation marks to search for an "exact phrase". Append an asterisk (*) to a search term to find variations of it (transp*, 32019R*). Use a question mark (?) instead of a single character in your search term to find variations of it (ca?e finds case, cane, care).
Search tips
Need more search options? Use the Advanced search

Document 32012R1232

Council Regulation (EU) No 1232/2012 of 17 December 2012 amending Regulation (EU) No 1344/2011 suspending the autonomous Common Customs Tariff duties on certain agricultural, fishery and industrial products

OJ L 350, 20/12/2012, p. 8–35 (BG, ES, CS, DA, DE, ET, EL, EN, FR, IT, LV, LT, HU, MT, NL, PL, PT, RO, SK, SL, FI, SV)

⏵This document has been published in a special edition(s) (HR)

Legal status of the document No longer in force, Date of end of validity: 31/12/2013; Repealed by 32013R1387

ELI: http://data.europa.eu/eli/reg/2012/1232/oj

Date of document:
17/12/2012
Date of effect:
20/12/2012; Entry into force Date pub. See Art 2
Date of effect:
01/01/2013; Application See Art 2
Date of end of validity:
31/12/2013; Repealed by 32013R1387
Author:
Council of the European Union
Form:
Regulation
Additional information:
NLE 2012/0302
Treaty:
Treaty on the Functioning of the European Union
Legal basis:
Proposal:
Link
Link
Link
Link
Link
Select all documents mentioning this document
Modifies:
Relation Act Comment Subdivision concerned From To
Modifies 32011R1344 TXT annex I 01/01/2013
Modifies 32011R1344 TXT annex II 01/01/2013
Modified by:
Relation Act Comment Subdivision concerned From To
Repealed by 32013R1387
Link

20.12.2012   

EN

Official Journal of the European Union

L 350/8

COUNCIL REGULATION (EU) No 1232/2012

of 17 December 2012

amending Regulation (EU) No 1344/2011 suspending the autonomous Common Customs Tariff duties on certain agricultural, fishery and industrial products

THE COUNCIL OF THE EUROPEAN UNION,

Having regard to the Treaty on the Functioning of the European Union, and in particular Article 31 thereof,

Having regard to the proposal from the European Commission,

Whereas:

(1)

It is in the interest of the Union to suspend totally the autonomous Common Customs Tariff duties on certain new products which are not currently listed in the Annex to Council Regulation (EU) No 1344/2011 (1).

(2)

It is no longer in the interest of the Union to maintain the suspension of autonomous Common Customs Tariff duties for 39 of the products which are currently listed in the Annex to Regulation (EU) No 1344/2011. Accordingly those products should be deleted.

(3)

It is necessary to modify the product description of 56 suspensions in the Annex to Regulation (EU) No 1344/2011 in order to take account of technical product developments and economic trends on the market as well as linguistic adaptations. Moreover, TARIC codes for four products should be changed. In addition, double classification is considered necessary for three products, whereas for two products multiple classification is no longer necessary.

(4)

Those suspensions for which technical modifications are necessary should be deleted from the list of suspensions in the Annex to Regulation (EU) No 1344/2011 and should be reinserted in that list with new product descriptions or new CN or TARIC codes.

(5)

A number of products were reviewed by the Commission in accordance with Article 2(2) and (3) of Regulation (EU) No 1344/2011. It is in the interest of the Union to provide for a new mandatory review of those products. The reviewed suspensions should therefore be deleted from the list of suspensions set out in the Annex to Regulation (EU) No 1344/2011 and reinserted in that list with new time limits for a mandatory review.

(6)

In view of their temporary nature, the suspensions listed in Annex I to this Regulation should be reviewed systematically, five years after their application or renewal. Moreover, closure of certain suspensions should be warranted at any time, following a proposal of the Commission on the basis of a review carried out on initiative of the Commission or at the request of one or more Member States, on the grounds that the suspensions are no longer in the Union’s interest to be maintained, or due to technical product developments, changed circumstances or economic trends on the market.

(7)

Since it is necessary that the suspensions laid down in this Regulation take effect from 1 January 2013, this Regulation should apply from the same date and enter into force immediately upon its publication in the Official Journal of the European Union,

HAS ADOPTED THIS REGULATION:

Article 1

The Annex to Regulation (EU) No 1344/2011 is hereby amended as follows:

(1)

the rows for the products listed in Annex I to this Regulation are inserted;

(2)

the rows for the products for which the CN and TARIC codes are set out in Annex II to this Regulation are deleted.

Article 2

This Regulation shall enter into force on the day of its publication in the Official Journal of the European Union.

It shall apply from 1 January 2013.

This Regulation shall be binding in its entirety and directly applicable in all Member States.

Done at Brussels, 17 December 2012.

For the Council

The President

S. ALETRARIS

(1)   OJ L 349, 31.12.2011, p. 1.

ANNEX I

CN code

TARIC

Description

Rate of autonomous duty

Date foreseen for mandatory review

ex 2008 60 19

ex 2008 60 39

30

30

Sweet cherries containing added spirit, whether or not with a sugar content of 9 % by weight, of a diameter of not more than 19,9 mm, with stone, for use in chocolate products (1)

10  % (2)

30.6.2013

ex 2008 93 91

20

Sweetened dried cranberries, excluding packing alone as processing, for the manufacture of products of food processing industries (3)

0  %

31.12.2017

ex 2008 99 49

ex 2008 99 99

70

11

Blanched vine leaves of the genus Karakishmish, in brine containing:

—

14 % or more but not more 16 % (± 2 %) of salt,

—

0,2 % or more but not more than 0,3 % (± 0,1 %) of citric acid, and

—

0,03 % or more but not more than 0,05 % (± 0,01 %) of sodium benzoate

for use in the manufacture of stuffed vine leaves with rice (1)

0  %

31.12.2017

ex 2009 49 30

91

Pineapple juice, other than in powder form:

—

with a Brix value of more than 20 but not more than 67,

—

a value of more than EUR 30 per 100 kg net weight,

—

containing added sugars

used in the manufacture of products of food or drink industry (1)

0  %

31.12.2014

ex 2805 19 90

10

Lithium metal of a purity by weight of 99,7 % or more (CAS RN 7439-93-2)

0  %

31.12.2017

ex 2805 30 90

ex 2805 30 90

ex 2805 30 90

40

50

60

Rare earth metals, scandium and yttrium of a purity by weight of 98,5 % or more

0  %

31.12.2015

ex 2816 40 00

10

Barium hydroxide (CAS RN 17194-00-2)

0  %

31.12.2017

ex 2823 00 00

10

Titanium dioxide (CAS RN 13463-67-7):

—

of a purity by weight of 99,9 % or more,

—

with an average grain-size of 1,2 μm or more but not more than 1,8 μm

—

with a specific surface of 5,0 m2/g or more, but not more than 7,5 m2/g

0  %

31.12.2017

ex 2823 00 00

20

Titanium dioxide (CAS RN 13463-67-7) with a purity by weight of 99,7 % or more and containing by weight:

—

not more than 0,005 % of potassium and sodium combined (expressed as elemental sodium and elemental potassium),

—

not more than 0,01 % of phosphorus (expressed as elemental phosphorus),

for use in the metallurgy (1)

0  %

31.12.2017

ex 2825 10 00

10

Hydroxylammonium chloride (CAS RN 5470-11-1)

0  %

31.12.2017

ex 2825 60 00

10

Zirconium dioxide (CAS RN 1314-23-4)

0  %

31.12.2017

ex 2835 10 00

10

Sodium hypophosphite monohydrate (CAS RN 10039-56-2)

0  %

31.12.2017

ex 2837 20 00

20

Ammonium iron (III) hexacyanoferrate (II) (CAS RN 25869-00-5)

0  %

31.12.2017

ex 2839 19 00

10

Disodium disilicate (CAS RN 13870-28-5)

0  %

31.12.2017

ex 2841 80 00

10

Diammonium wolframate (ammonium paratungstate) (CAS RN 11120-25-5)

0  %

31.12.2017

ex 2841 90 85

10

Lithium cobalt(III) oxide with a cobalt content of at least 59 % (CAS RN 12190-79-3)

0  %

31.12.2017

ex 2850 00 20

30

Titanium nitride with a particle size of not more than 250 nm (CAS RN 25583-20-4)

0  %

31.12.2017

ex 2904 90 95

40

4-Chlorobenzenesulphonyl chloride (CAS RN 98-60-2)

0  %

31.12.2017

ex 2905 19 00

70

Titanium tetrabutanolate (CAS RN 5593-70-4)

0  %

31.12.2017

ex 2905 19 00

80

Titanium tetraisopropoxide (CAS RN 546-68-9)

0  %

31.12.2017

ex 2908 99 00

40

4,5-Dihydroxynaphthalene-2,7-disulphonic acid (CAS RN 148-25-4)

0  %

31.12.2017

ex 2912 49 00

20

4-Hydroxybenzaldehyde (CAS RN 123-08-0)

0  %

31.12.2017

ex 2914 19 90

20

Heptan-2-one (CAS RN 110-43-0)

0  %

31.12.2017

ex 2914 19 90

30

3-Methylbutanone (CAS RN 563-80-4)

0  %

31.12.2017

ex 2914 19 90

40

Pentan-2-one (CAS RN 107-87-9)

0  %

31.12.2017

ex 2914 39 00

30

Benzophenone (CAS RN 119-61-9)

0  %

31.12.2017

ex 2914 39 00

70

Benzil (CAS RN 134-81-6)

0  %

31.12.2017

ex 2914 39 00

80

4’-Methylacetophenone (CAS RN 122-00-9)

0  %

31.12.2017

ex 2914 50 00

60

2,2-Dimethoxy-2-phenylacetophenone (CAS RN 24650-42-8)

0  %

31.12.2017

ex 2914 50 00

70

16α,17α-Epoxy-3β-hydroxypregn-5-en-20-one (CAS RN 974-23-2)

0  %

31.12.2017

ex 2915 90 70

75

2,2-Dimethylbutyryl chloride (CAS RN 5856-77-9)

0  %

31.12.2017

ex 2916 12 00

60

Octadecyl acrylate (CAS RN 4813-57-4)

0  %

31.12.2017

ex 2916 39 90

55

4-tert-Butylbenzoic acid (CAS RN 98-73-7)

0  %

31.12.2017

ex 2916 39 90

75

m-Toluic acid (CAS RN 99-04-7)

0  %

31.12.2017

ex 2916 39 90

85

(2,4,5-Trifluorophenyl)acetic acid (CAS RN 209995-38-0)

0  %

31.12.2017

ex 2917 19 10

20

Diethyl malonate (CAS RN 105-53-3)

0  %

31.12.2017

ex 2918 29 00

70

Pentaerythritol tetrakis(3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate) (CAS RN 6683-19-8)

0  %

31.12.2017

ex 2918 29 00

80

Butyl 3,5-bis(1,1-dimethylethylene)-4-hydroxybenzenepropanoate (CAS RN 52449-44-2)

0  %

31.12.2017

ex 2920 19 00

10

Fenitrothion (ISO) (CAS RN 122-14-5)

0  %

31.12.2013

ex 2921 19 60

10

2-(N,N-Diethylamino)ethyl chloride hydrochloride (CAS RN 869-24-9)

0  %

31.12.2017

ex 2921 30 99

30

1,3-Cyclohexanedimethanamine (CAS RN 2579-20-6)

0  %

31.12.2015

ex 2921 42 00

86

2,5-Dichloroaniline of a purity by weight of 99,5 % or more (CAS RN 95-82-9)

0  %

31.12.2017

ex 2921 42 00

87

N-Methylaniline (CAS RN 100-61-8)

0  %

31.12.2017

ex 2921 42 00

88

3,4-Dichloroaniline-6-sulphonic acid (CAS RN 6331-96-0)

0  %

31.12.2017

ex 2921 43 00

80

6-Chloro-α,α,α-trifluoro-m-toluidine (CAS RN 121-50-6)

0  %

31.12.2017

ex 2921 49 00

85

4-Isopropylaniline (CAS RN 99-88-7)

0  %

31.12.2017

ex 2921 59 90

30

3,3’-Dichlorobenzidine dihydrochloride (CAS RN 612-83-9)

0  %

31.12.2017

ex 2921 59 90

60

(2R,5R)-1,6-Diphenylhexane-2,5-diamine dihydrochloride (CAS RN 1247119-31-8)

0  %

31.12.2017

ex 2922 49 85

20

3-Amino-4-chlorobenzoic acid (CAS RN 2840-28-0)

0  %

31.12.2017

ex 2922 49 85

60

Ethyl-4-dimethylaminobenzoate (CAS RN 10287-53-3)

0  %

31.12.2017

ex 2924 19 00

80

Tetrabutylurea (CAS RN 4559-86-8)

0  %

31.12.2017

ex 2924 29 98

51

Methyl 2-amino-4-[[(2,5-dichlorophenyl)amino]carbonyl]benzoate (CAS RN 59673-82-4)

0  %

31.12.2017

ex 2924 29 98

53

4-Amino-N-[4-(aminocarbonyl)phenyl]benzamide (CAS RN 74441-06-8)

0  %

31.12.2017

ex 2924 29 98

86

Anthranilamide of a purity by weight of 99,5 % or more (CAS RN 88-68-6)

0  %

31.12.2017

ex 2925 19 95

20

4,5,6,7-Tetrahydroisoindole-1,3-dione (CAS RN 4720-86-9)

0  %

31.12.2017

ex 2925 19 95

30

N,N’-(m-Phenylene)dimaleimide (CAS RN 3006-93-7)

0  %

31.12.2017

ex 2926 90 95

18

Methyl cyanoacetate (CAS RN 105-34-0)

0  %

31.12.2017

ex 2927 00 00

80

4-[(2,5-Dichlorophenyl)azo]-3-hydroxy-2-naphthoic acid (CAS RN 51867-77-7)

0  %

31.12.2017

ex 2928 00 90

75

Metaflumizone (ISO) (CAS RN 139968-49-3)

0  %

31.12.2016

ex 2928 00 90

80

Cyflufenamid (ISO) (CAS RN 180409-60-3)

0  %

31.12.2013

ex 2928 00 90

85

Daminozide (ISO) with a purity by weight of 99 % or more (CAS RN 1596-84-5)

0  %

31.12.2016

ex 2930 20 00

10

Prosulfocarb (ISO) (CAS RN 52888-80-9)

0  %

31.12.2017

ex 2930 90 99

66

Diphenyl sulphide (CAS RN 139-66-2)

0  %

31.12.2017

ex 2930 90 99

67

3-Bromomethyl-2-chloro-4-(methylsulphonyl)-benzoic acid (CAS RN 120100-05-2)

0  %

31.12.2013

ex 2930 90 99

68

Clethodim (ISO) (CAS RN 99129-21-2)

0  %

31.12.2017

ex 2930 90 99

71

Triphenylsulphonium chloride (CAS RN 4270-70-6)

0  %

31.12.2013

ex 2930 90 99

83

Methyl-p-tolyl sulphone (CAS RN 3185-99-7)

0  %

31.12.2017

ex 2931 90 90

14

Sodium diisobutyldithiophosphinate (CAS RN 13360-78-6) in an aqueous solution

0  %

31.12.2017

ex 2932 20 90

20

Ethyl 6’-(diethylamino)-3-oxo-3H-spiro[2-benzofuran-1,9’-xanthene]-2’-carboxylate (CAS RN 154306-60-2)

0  %

31.12.2017

ex 2932 20 90

40

(S)-(-)-α-Amino-γ-butyrolactonehydrobromide (CAS RN 15295-77-9)

0  %

31.12.2017

ex 2933 19 90

40

Edaravone (INN) (CAS RN 89-25-8)

0  %

31.12.2013

ex 2933 19 90

80

3-(4,5-Dihydro-3-methyl-5-oxo-1H-pyrazol-1-yl)benzenesulphonic acid (CAS RN 119-17-5)

0  %

31.12.2017

ex 2933 29 90

40

Triflumizole (ISO) (CAS RN 68694-11-1)

0  %

31.12.2013

ex 2933 39 99

12

2,3-Dichloropyridine (CAS RN 2402-77-9)

0  %

31.12.2017

ex 2933 39 99

18

6-Chloro-3-nitropyridin-2-ylamine (CAS RN 27048-04-0)

0  %

31.12.2017

ex 2933 39 99

55

Pyriproxyfen (ISO) of a purity by weight of 97 % or more (CAS RN 95737-68-1)

0  %

31.12.2014

ex 2933 59 95

77

3-(Trifluoromethyl)-5,6,7,8-tetrahydro[1,2,4]triazolo[4,3-a]pyrazine hydrochloride (1:1) (CAS RN 762240-92-6)

0  %

31.12.2017

ex 2933 69 80

55

Terbutryn (ISO) (CAS RN 886-50-0)

0  %

31.12.2015

ex 2933 79 00

30

5-Vinyl-2-pyrrolidone (CAS RN 7529-16-0)

0  %

31.12.2017

ex 2933 99 80

18

4,4’-[(9-Butyl-9H-carbazol-3-yl)methylene]bis[N-methyl-N-phenylaniline] (CAS RN 67707-04-4)

0  %

31.12.2017

ex 2933 99 80

22

(2S)-2-Benzyl-N,N-dimethylaziridine-1-sulfonamide (CAS RN 902146-43-4)

0  %

31.12.2017

ex 2933 99 80

24

1,3-Dihydro-5,6-diamino-2H-benzimidazol-2-one (CAS RN 55621-49-3)

0  %

31.12.2017

ex 2933 99 80

28

N-(2,3-Dihydro-2-oxo-1H-benzimidazol-5-yl)-3-hydroxynaphthalene-2-carboxamide (CAS RN 26848-40-8)

0  %

31.12.2017

ex 2933 99 80

50

Metconazole (ISO) (CAS RN 125116-23-6)

3,2  %

31.12.2013

ex 2933 99 80

89

Carbendazim (ISO) (CAS RN 10605-21-7)

0  %

31.12.2013

ex 2934 10 00

15

4-Nitrophenyl thiazol-5-ylmethyl carbonate (CAS RN 144163-97-3)

0  %

31.12.2017

ex 2934 10 00

25

(S)-Ethyl-2-(3-((2-isopropylthiazol-4-yl)methyl)-3-methylureido)-4-morpholinobutanoate oxalate (CAS RN 1247119-36-3)

0  %

31.12.2017

ex 2934 10 00

35

(2-Isopropylthiazol-4-yl)-N-methylmethanamine dihydrochloride (CAS RN 1185167-55-8)

0  %

31.12.2017

ex 2934 20 80

40

1,2-Benzisothiazol-3(2H)-one (Benzisothiazolinone (BIT)) (CAS RN 2634-33-5)

0  %

31.12.2017

ex 2934 30 90

10

2-Methylthiophenothiazine (CAS RN 7643-08-5)

0  %

31.12.2017

ex 2934 99 90

12

Morpholino phosphorodiamidate oligomers (morpholino oligonucleotides) intended for genetic research (1)

0  %

31.12.2017

ex 2934 99 90

14

Ethyl N-{[1-methyl-2-({[4-(5-oxo-4,5-dihydro-1,2,4-oxadiazol-3-yl)phenyl]amino}methyl)-1H-benzimidazol-5-yl]carbonyl}-N-pyridin-2-yl-b-alaninate (CAS RN 872728-84-2)

0  %

31.12.2017

ex 2934 99 90

15

Carboxin (ISO) (CAS RN 5234-68-4)

0  %

31.12.2013

ex 2934 99 90

18

3,3-bis(2-Methyl-1-octyl-1H-indol-3-yl)phthalide (CAS RN 50292-95-0)

0  %

31.12.2017

ex 2934 99 90

22

7-[4-(Diethylamino)-2-ethoxyphenyl]-7-(2-methyl-1-octyl-1H-indol-3-yl) furo[3,4-b]pyridin-5(7H)-one (CAS RN 87563-89-1)

0  %

31.12.2017

ex 2934 99 90

23

Bromuconazole (ISO) with a purity by weight of 96 % or more (CAS RN 116255-48-2)

0  %

31.12.2016

ex 2934 99 90

74

2-Isopropylthioxanthone (CAS RN 5495-84-1)

0  %

31.12.2017

ex 2934 99 90

83

Flumioxazin (ISO) of a purity by weight of 96 % or more (CAS RN 103361-09-7)

0  %

31.12.2014

ex 2934 99 90

84

Etoxazole (ISO) of a purity by weight of 94,8 % or more (CAS RN 153233-91-1)

0  %

31.12.2014

ex 2942 00 00

10

N,N-Dimethyloctylamine – boron trichloride (1:1) (CAS RN 34762-90-8)

0  %

31.12.2017

ex 3102 50 90

10

Natural sodium nitrate (CAS RN 7631-99-4)

0  %

31.12.2017

ex 3204 11 00

70

Dye C.I. Disperse Red 343

0  %

31.12.2017

ex 3204 13 00

20

(2,2’-(3,3’-Dioxidobiphenyl-4,4’-diyldiazo)bis(6-(4-(3-(diethylamino)propylamino)-6-(3-(diethylammonio)propylamino)-1,3,5-triazin-2-ylamino)-3-sulfonato-1-naphtholato))dicopper(II) acetate lactate (CAS RN 159604-94-1)

0  %

31.12.2017

ex 3204 15 00

10

Dye C.I. Vat Orange 7 (C.I. Pigment Orange 43)

0  %

31.12.2017

ex 3204 17 00

30

Dye C.I. Pigment Yellow 97

0  %

31.12.2017

ex 3204 17 00

80

Dye C.I. Pigment Red 207

0  %

31.12.2017

ex 3204 17 00

85

Dye C.I. Pigment Blue 61

0  %

31.12.2017

ex 3204 17 00

88

Dye C.I. Pigment Violet 3

0  %

31.12.2017

ex 3204 19 00

84

Dye C.I. Solvent Blue 67

0  %

31.12.2017

ex 3204 19 00

85

Dye C.I. Solvent Red HPR

0  %

31.12.2017

ex 3208 90 19

ex 3208 90 91

25

20

Tetrafluoroethylene copolymer in butylacetate solution with a content of solvent of 50 % (± 2 %) by weight

0  %

31.12.2017

ex 3208 90 19

75

Acenaphthalene copolymer in ethyl lactate solution

0  %

31.12.2017

ex 3402 13 00

20

Surfactant containing 1,4-dimethyl-1,4-bis(2-methylpropyl)-2-butyne-1,4-diyl ether, polymerised with oxirane, methyl terminated

0  %

31.12.2017

ex 3802 90 00

11

Soda flux calcinated diatomaceous earth, acid washed, for use as filter aid in the manufacture of pharmaceutical and/or biochemical products

0  %

31.12.2017

ex 3808 91 90

10

Indoxacarb (ISO) and its (R) isomer, fixed on a support of silicon dioxide

0  %

31.12.2013

ex 3808 91 90

50

Spodoptera exigua nuclear polyhedrosis virus (SeNPV) in an aqueous glycerol suspension

0  %

31.12.2013

ex 3808 91 90

60

Spinetoram (ISO) (CAS RN 935545-74-7), preparation of two spinosyn components (3’-ethoxy-5,6-dihydro spinosyn J) and (3’-ethoxy- spinosyn L)

0  %

31.12.2017

ex 3808 92 90

10

Fungicide in the form of a powder, containing by weight 65 % or more but not more than 75 % of hymexazole (ISO), not put up for retail sale

0  %

31.12.2013

ex 3808 93 15

10

Preparation based on a concentrate containing by weight 45 % or more but not more than 55 % of the active herbicidal ingredient Penoxsulam as an aqueous suspension

0  %

31.12.2017

ex 3811 21 00

30

Additives for lubricating oils, containing mineral oils, consisting of calcium salts of reaction products of polyisobutylene substituted phenol with salicylic acid and formaldehyde, used as a concentrated additive for the manufacture of engine oils through a blending process

0  %

31.12.2017

ex 3811 21 00

40

Additives for lubricating oils, containing mineral oils, based on a mixture of dodecylphenol sulphide calcium salts (CAS RN 68784-26-9), used as a concentrated additive for the manufacture of engine oils through a blending process

0  %

31.12.2017

ex 3811 21 00

50

Additives for lubricating oils,

—

based on calcium C16-24 alkylbenzenesulphonates (CAS RN 70024-69-0),

—

containing mineral oils,

used as a concentrated additive for the manufacture of engine oils through a blending process

0  %

31.12.2017

ex 3811 21 00

60

Additives for lubricating oils, containing mineral oils,

—

based on calcium polypropylenyl substituted benzenesulphonate (CAS RN 75975-85-8) with a content by weight of 25 % or more but not more than 35 %,

—

with a total base number (TBN) of 280 or more but not more than 320,

used as a concentrated additive for the manufacture of engine oils through a blending process

0  %

31.12.2017

ex 3811 21 00

70

Additives for lubricating oils,

—

containing polyisobutylene succinimide derived from reaction products of polyethylenepolyamines with polyisobutenyl succinic anhydride (CAS RN 84605-20-9),

—

containing mineral oils,

—

with a chlorine content by weight of 0,05 % or more but not more than 0,25 %,

—

with a total base number (TBN) of more than 20,

used as a concentrated additive for the manufacture of engine oils through a blending process

0  %

31.12.2017

ex 3811 29 00

10

Additives for lubricating oils, consisting of reaction products of diphenylamine with branched nonene (CAS RN 36878-20-3 and CAS RN 27177-41-9), used as a concentrated additive for the manufacture of engine oils through a blending process

0  %

31.12.2017

ex 3811 29 00

20

Additives for lubricating oils, consisting of reaction products of bis(2-methylpentan-2-yl)dithiophosphoric acid with propylene oxide, phosphorus oxide, and amines with C12-14 alkyl chains, used as a concentrated additive for the manufacture of engine oils through a blending process

0  %

31.12.2017

ex 3811 29 00

30

Additives for lubricating oils, consisting of reaction products of butyl-cyclohex-3-enecarboxylate, sulphur and triphenyl phosphite (CAS RN 93925-37-2), used as a concentrated additive for the manufacture of engine oils through a blending process

0  %

31.12.2017

ex 3811 29 00

40

Additives for lubricating oils, consisting of reaction products of 2-methyl-prop-1-ene with sulphur monochloride and sodium sulphide (CAS RN 68511-50-2), with a chlorine content by weight of 0,05 % or more but not more than 0,5 %, used as a concentrated additive for the manufacture of engine oils through a blending process

0  %

31.12.2017

ex 3811 29 00

50

Additives for lubricating oils, consisting of a mixture of N,N-dialkyl -2-hydroxyacetamides with alkyl chain lengths between 12 and 18 carbon atoms (CAS RN 866259-61-2), used as a concentrated additive for the manufacture of engine oils through a blending process

0  %

31.12.2017

ex 3811 90 00

30

Solution of a (dimethylamino)methyl-derivative of polyisobutylene phenol, containing by weight 10 % or more but not more than 19,9 % petroleum naphtha

0  %

31.12.2017

ex 3811 90 00

40

Solution of a quaternary ammonium salt based on polyisobutenyl succinimide, containing by weight 20 % or more but not more than 29,9 % 2-ethylhexanol

0  %

31.12.2017

ex 3815 90 90

16

Initiator based on dimethylaminopropyl urea

0  %

31.12.2017

ex 3815 90 90

18

Oxidation catalyst with an active ingredient of di[manganese (1+)], 1,2-bis(octahydro-4,7-dimethyl-1H-1,4,7-triazonine-1-yl-kN1, kN4, kN7)ethane-di-μ-oxo-μ-(ethanoato-kO, kO’)-, di[chloride(1-)], used to accelerate chemical oxidation or bleaching (CAS RN 1217890-37-3)

0  %

31.12.2017

ex 3815 90 90

85

Catalyst based on aluminosilicate (zeolite), for the alkylation of aromatic hydrocarbons, for the transalkylation of alkylaromatic hydrocarbons or for the oligomerisation of olefins (1)

0  %

31.12.2017

ex 3815 90 90

89

Rhodococcus rhodocrous J1 bacteria, containing enzymes, suspended in a polyacrylamide gel or in water, for use as a catalyst in the production of acrylamide by the hydration of acrylonitrile (1)

0  %

31.12.2016

ex 3824 90 97

33

Preparation, containing:

—

trioctylphosphine oxide (CAS RN 78-50-2),

—

dioctylhexylphosphine oxide (CAS RN 31160-66-4),

—

octyldihexylphosphine oxide (CAS RN 31160-64-2) and

—

trihexylphosphine oxide (CAS RN 9084-48-8)

0  %

31.12.2016

ex 3824 90 97

35

Mixture of:

—

3,3-bis(2-methyl-1-octyl-1H-indol-3-yl)phthalide (CAS RN 50292-95-0) and

—

ethyl-6’-(diethylamino)-3-oxo-spiro-[isobenzofuran-1(3H),9’-[9H]xanthene]-2’-carboxylate (CAS RN 154306-60-2)

0  %

31.12.2017

ex 3824 90 97

36

Preparation based on 2,5,8,11-tetramethyl-6-dodecyn-5,8-diol ethoxylate (CAS RN 169117-72-0)

0  %

31.12.2017

ex 3824 90 97

37

Liquid crystal mixture for use in the manufacture of displays (1)

0  %

31.12.2017

ex 3824 90 97

38

Alkyl carbonate-based preparation, also containing a UV absorber, for use in the manufacture of spectacle lenses (1)

0  %

31.12.2017

ex 3824 90 97

41

Preparation, consisting of:

—

dipropylene glycol

—

tripropylene glycol

—

tetrapropylene glycol and

—

pentapropylene glycol

0  %

31.12.2017

ex 3824 90 97

43

Nickel hydroxide, doped with 12 % or more but not more than 18 % by weight of zinc hydroxide and cobalt hydroxide, of a kind used to produce positive electrodes for accumulators

0  %

31.12.2017

ex 3824 90 97

44

Mixture of phytosterols, not in the form of powder, containing by weight:

—

75 % or more of sterols,

—

not more than 25 % of stanols,

for use in the manufacture of stanols/sterols or stanol/sterol esters (1)

0  %

31.12.2017

ex 3824 90 97

70

Paste containing by weight 75 % or more, but not more than 85 % of copper, and also containing inorganic oxides, ethyl cellulose and a solvent

0  %

31.12.2017

ex 3824 90 97

78

Mixture of phytosterols derived from wood and wood based oils (tall oil), in the form of powder with a particle size not more than 300 μm, containing by weight:

—

60 % or more, but not more than 80 % of sitosterols,

—

not more than 15 % of campesterols,

—

not more than 5 % of stigmasterols,

—

not more than 15 % of betasitostanols

0  %

31.12.2017

ex 3903 90 90

ex 3911 90 99

35

43

Copolymer of α-methylstyrene and styrene, having a softening point of more than 113 °C

0  %

31.12.2013

ex 3903 90 90

86

Mixture containing by weight:

—

45 % or more but not more than 65 % of polymers of styrene

—

35 % or more but not more than 45 % of poly(phenylene ether)

—

not more than 10 % of other additives

and with one or more of the following special colour effects:

—

metallic or pearlescent with a visual angular metamerism caused by at least 0,3 % flake-based pigment

—

fluorescent, as characterised by emitting light during absorption of ultraviolet radiation

—

bright white, as characterised by L* not less than 92 and b* not more than 2 and a* between – 5 and 7 on the CIELab colour scale

0  %

31.12.2013

ex 3904 69 80

85

Copolymer of ethylene with chlorotrifluoroethylene, whether or not modified with hexafluoroisobutylene, in powder, whether or not with fillers

0  %

31.12.2017

ex 3907 30 00

60

Polyglycerol polyglycidyl ether resin (CAS RN 105521-63-9)

0  %

31.12.2017

ex 3907 60 80

50

Flexible packages (for oxygen sensitive polymers) manufactured from a laminate of:

—

not more than 75 μm of polyethylene,

—

not more than 50 μm of polyamide,

—

not more than 15 μm of polyethylene terephthalate and

—

not more than 9 μm of aluminium

with a tensile strength of more than 70 N/15 mm and oxygen transmission rate of less than 0,1 cm3/m2/24 hrs at 0,1 MPa

0  %

31.12.2017

ex 3907 99 90

25

Copolymer, containing 72 % by weight or more of terephthalic acid and/or isomers thereof and cyclohexanedimethanol

0  %

31.12.2017

ex 3907 99 90

60

Copolymer of terephthalic acid and isophthalic acid with bisphenol A

0  %

31.12.2017

ex 3908 90 00

60

Copolymer consisting of:

—

hexanedioic acid

—

12-aminododecanoic acid

—

hexahydro-2H-azepin-2-one, and

—

1,6-hexanediamine

0  %

31.12.2017

ex 3909 40 00

20

Powder of thermosetting resin in which magnetic particles have been evenly distributed, for use in the manufacture of ink for photocopiers, fax machines, printers and multifunction devices (1)

0  %

31.12.2015

ex 3909 40 00

30

Mixture of:

—

alkylphenol — formaldehyde resin, whether or not brominated, and

—

zinc oxide

0  %

31.12.2017

ex 3910 00 00

50

Silicone based pressure sensitive adhesive in solvent containing copoly(dimethylsiloxane/diphenylsiloxane) gum

0  %

31.12.2017

ex 3911 90 19

30

Copolymer of ethyleneimine and ethyleneimine dithiocarbamate, in an aqueous solution of sodium hydroxide

0  %

31.12.2017

ex 3911 90 99

53

Hydrogenated polymer of 1,2,3,4,4a,5,8,8a-octahydro-1,4:5,8-dimethanonaphthalene with 3a,4,7,7a-tetrahydro-4,7-methano-1H-indene and 4,4a,9,9a-tetrahydro-1,4-methano-1H-fluorene (CAS RN 503442-46-4)

0  %

31.12.2017

ex 3911 90 99

57

Hydrogenated polymer of 1,2,3,4,4a,5,8,8a-octahydro-1,4:5,8-dimethanonaphthalene with 4,4a,9,9a-tetrahydro-1,4-methano-1H-fluorene (CAS RN 503298-02-0)

0  %

31.12.2017

ex 3919 10 80

ex 3919 90 00

43

26

Ethylene vinyl acetate film:

—

of a thickness of 100 μm or more,

—

coated on one side with an acrylic pressure sensitive or UV-sensitive adhesive and a polyester liner

0  %

31.12.2014

ex 3919 10 80

ex 3919 90 00

45

45

Reinforced polyethylene foam tape, coated on both sides with an acrylic micro channelled pressure sensitive adhesive and on one side a liner, with an application thickness of 0,38 mm or more but not more than 1,53 mm

0  %

31.12.2017

ex 3919 10 80

ex 3919 90 00

55

53

Acrylic foam tape, covered on one side with a heat activatable adhesive or an acrylic pressure sensitive adhesive and on the other side with an acrylic pressure sensitive adhesive and a release sheet, of a peel adhesion at an angle of 90o of more than 25 N/cm (as determined by the ASTM D 3 330 method)

0  %

31.12.2017

ex 3919 10 80

ex 3919 90 00

85

28

Poly(vinyl chloride) or polyethylene or any other polyolefine film:

—

of a thickness of 65 μm or more,

—

coated on one side with an acrylic UV-sensitive adhesive and a polyester liner

0  %

31.12.2014

ex 3919 90 00

25

Film consisting of a multi-layer construction of poly(ethylene terephthalate) and copolymer of butylacrylate and methylmethacrylate, coated on one side with an acrylic abrasion resistant coating incorporating nanoparticles of antimony tin oxide and carbon black, and on the other side with an acrylic pressure sensitive adhesive and a silicone-coated poly(ethylene terephthalate) protective liner

0  %

31.12.2017

ex 3919 90 00

ex 9001 20 00

47

40

Polariser film, in rolls, consisting of a multilayered polyvinyl alcohol film, supported on either side by a triacetyl cellulose film, with a pressure sensitive adhesive and release film on one side

0  %

31.12.2017

ex 3920 10 40

30

Co-extruded seven to nine layered film predominately of copolymers of ethylene or functionalised polymers of ethylene, consisting of:

—

a tri-layer barrier with a core layer predominantly of ethylene vinyl alcohol covered on either side with a layer predominantly of cyclic olefin polymers,

—

covered on either side with two or more layers of polymeric material,

and having an overall total thickness of not more than 110 μm

0  %

31.12.2017

ex 3920 20 29

ex 3920 20 80

55

93

Co-extruded seven to nine layered film predominately of copolymers of propylene, consisting of:

—

a tri-layer barrier with a core layer predominantly of ethylene vinyl alcohol covered on either side with a layer predominantly of cyclic olefin polymers,

—

covered on either side with two or more layers of polymeric material,

and having an overall total thickness of not more than 110 μm

0  %

31.12.2017

ex 3920 20 29

94

Co-extruded trilayer film,

—

each layer containing a mixture of polypropylene and polyethylene,

—

containing not more than 3 % by weight of other polymers,

—

whether or not containing titanium dioxide in the core layer,

—

of an overall thickness of not more than 70 μm

0  %

31.12.2016

ex 3920 51 00

40

Sheets of polymethylmethacrylate conforming to standard EN 4 366 (MIL-PRF-25690)

0  %

31.12.2013

ex 3920 62 19

42

Poly(ethylene terephthalate) film, of a thickness of 18μm or more but not more than 25 μm, having:

—

a shrinkage of 3,4 (± 0,1) % in the machine direction (as determined by the ASTM D 1204 method at 190 °C for 20 min) and

—

a shrinkage of 0,3 (± 0,2) % in the transverse direction (as determined by the ASTM D 1204 method at 190 °C for 20 min)

0  %

31.12.2013

ex 3920 62 19

81

Poly(ethylene terephthalate) film of a thickness of not more than 20 μm, coated on both sides with a gas barrier layer consisting of a polymeric matrix in which silica has been dispersed and of a thickness of not more than 2 μm

0  %

31.12.2017

ex 3920 79 90

10

Cellulose acetyl butyrate film, whether or not combined with a polycarbonate layer, of a thickness of not more than 0,81 mm containing a micro-louvre with a typical viewing angle of 30 degrees measured on each side of the surface normal

0  %

31.12.2013

ex 3920 92 00

30

Polyamide film of a thickness of not more than 20 μm, coated on both sides with a gas barrier layer which consists of a polymeric matrix in which silica has been dispersed and of a thickness of not more than 2 μm

0  %

31.12.2013

ex 5407 10 00

10

Textile fabric, consisting of warp filament yarns of polyamide-6,6 and weft filament yarns of polyamide-6,6, polyurethane and a copolymer of terephthalic acid, p-phenylenediamine and 3,4’–oxybis (phenyleneamine)

0  %

31.12.2017

ex 5603 11 10

ex 5603 11 90

20

20

Non-wovens, not weighing more than 20 g/m2, containing spunbonded and meltblown filaments put together in a sandwich way with the two outer layers containing fine endless filaments (not less than 10 μm but not more than 20 μm in diameter) and the inner layer containing super-fine endless filaments (not less than 1 μm but not more than 5 μm in diameter), for the manufacture of napkins and napkin liners for babies and similar sanitary napkins (1)

0  %

31.12.2017

ex 5603 12 90

50

Non-woven:

—

weighing 30 g/m2 or more, but not more than 60 g/m2,

—

containing fibres of polypropylene or of polypropylene and polyethylene,

—

whether or not printed, with:

—

on one side, 65 % of the total surface area having circular bobbles of 4 mm in diameter, consisting of anchored, elevated un-bonded curly fibres, suitable for the engagement of extruded hook materials, and the remaining 35 % of the surface area being bonded,

—

and on other side a smooth untextured surface,

for use in the manufacture of napkins and napkin liners for babies and similar sanitary articles (1)

0  %

31.12.2017

ex 5603 12 90

ex 5603 13 90

ex 5603 92 90

ex 5603 93 90

70

70

40

10

Non-wovens of polypropylene,

—

with a melt blown layer, laminated on each side with spunbonded filaments of polypropylene,

—

with a weight of not more than 150 g/m2,

—

in the piece or simply cut into squares or rectangles, and

—

not impregnated

0  %

31.12.2013

ex 5603 92 90

ex 5603 94 90

70

40

Non-wovens, consisting of multiple layers of a mixture of meltblown fibres and staple fibres of polypropylene and polyester, whether or not laminated on one side or on both sides with spunbonded filaments of polypropylene

0  %

31.12.2013

ex 5603 92 90

ex 5603 93 90

80

50

Non-woven polyolefin fabric, consisting of an elastomeric layer, laminated on each side with polyolefin filaments:

—

a weight of 25 g/m2 or more but not more than 150 g/m2,

—

in the piece or simply cut into squares or rectangles,

—

not impregnated,

—

with cross-directional or machine-directional stretch properties

for use in the manufacture of infant/child care products (1)

0  %

31.12.2016

ex 6909 19 00

15

Ceramic ring with rectangular transversal section having an external diameter of 19 mm or more (+ 0,00 mm/– 0,10 mm) but not more than 29 mm (+ 0,00 mm/– 0,20 mm), an internal diameter of 10 mm or more (+ 0,00 mm/– 0,20 mm) but not more than 19 mm (+ 0,00 mm/– 0,30 mm), a thickness variable from 2 mm (± 0,10 mm) to 3,70 mm (± 0,20 mm) and heat resistance 240 °C or more, containing by weight:

—

90 % (± 1,5 %) of aluminium oxide

—

7 % (± 1 %) of titanium oxide

0  %

31.12.2017

ex 7005 10 30

10

Float glass:

—

of a thickness of 4,0 mm or more but not more than 4,2 mm,

—

with a light transmission of 91 % or more measured using a D-type light source,

—

coated on one surface with a fluorine doped tin dioxide reflective layer

0  %

31.12.2017

ex 7019 12 00

ex 7019 12 00

05

25

Rovings ranging from 1 980 to 2 033 tex, composed of continuous glass filaments of 9 μm (± 0,5 μm)

0  %

31.12.2013

ex 7019 19 10

15

S-glass yarn of 33 tex or a multiple of 33 tex (± 13 %) made from continuous spun-glass filaments with fibres of a diameter of 9 μm (– 1 μm/+ 1,5 μm)

0  %

31.12.2017

ex 7326 90 98

40

TV pedestal stand with metal upper part for fixation and stabilisation of TV cabinet case/body

0  %

31.12.2016

ex 7601 20 20

ex 7601 20 80

10

10

Sheets and billets of secondary aluminium alloy containing lithium

0  %

31.12.2017

ex 7604 29 10

ex 7606 12 99

10

20

Sheets and bars of aluminium-lithium alloys

0  %

31.12.2015

ex 7606 12 92

ex 7607 11 90

20

20

Aluminium and magnesium alloy strip:

—

in rolls,

—

of a thickness of 0,14 mm or more but not more than 0,40 mm,

—

a width of 12,5 mm or more but not more than 359 mm,

—

a tensile strength of 285 N/mm2 or more, and

—

an elongation at break of 1 % or more, and

containing by weight:

—

93,3 % or more of aluminium,

—

2,2 % or more but not more than 5 % of magnesium, and

—

not more than 1,8 % of other elements

0  %

31.12.2017

ex 7607 11 90

30

Laminated aluminium foil with:

—

99 % or more of aluminium,

—

a silica and water glass free hydrophilic coating,

—

a total thickness of not more than 0,120 mm,

—

a tensile strength of 100 N/mm2 or more (as determined by test method ASTM E8), and

—

an elongation at break of 1 % or more

0  %

30.6.2013

ex 7607 20 90

10

Aluminium laminated film of a total thickness of not more than 0,123 mm, comprising of a layer of aluminium of a thickness of not more than 0,040 mm, polyamide and polypropylene base films, and a protective coating against corrosion by hydrofluoric acid, for use in the manufacture of lithium polymer batteries (1)

0  %

31.12.2017

ex 8102 10 00

10

Molybdenum powder with

—

a purity by weight of 99 % or more and

—

a particle size of 1,0 μm or more, but not more than 5,0 μm

0  %

31.12.2017

ex 8108 90 30

20

Bars, rods and wire of alloy of titanium and aluminium, containing by weight 1 % or more but not more than 2 % of aluminium, for use in the manufacture of silencers and exhaust pipes of subheadings 8708 92 or 8714 10 00  (1)

0  %

31.12.2017

ex 8108 90 50

30

Alloy of titanium and silicon, containing by weight 0,15 % or more but not more than 0,60 % of silicon, in sheets or rolls, for use in the manufacture of:

—

exhaust systems for internal combustion engines or

—

tubes and pipes of subheading 8108 90 60  (1)

0  %

31.12.2017

ex 8108 90 50

40

Titanium-alloy sheets for the manufacture of structural parts of aircrafts (1)

0  %

31.12.2017

ex 8108 90 50

50

Plates, sheets, strips and foils of an alloy of titanium, copper and niobium, containing by weight 0,8 % or more but not more than 1,2 % of copper and 0,4 % or more but not more than 0,6 % of niobium

0  %

31.12.2017

ex 8108 90 50

85

Plates, sheets, strip and foil of non-alloyed titanium

0  %

31.12.2017

ex 8113 00 90

10

Carrier plate of aluminium silicon carbide (AlSiC-9) for electronic circuits

0  %

31.12.2017

ex 8207 30 10

10

Set of transfer and/or tandem press tools for cold-forming, pressing, drawing, cutting, punching, bending, calibrating, bordering and throating of metal sheets, for use in the manufacture of frame parts of motor vehicles (1)

0  %

31.12.2017

ex 8407 33 00

ex 8407 90 80

ex 8407 90 90

10

10

10

Spark-ignition reciprocating or rotary internal combustion piston engines, having a cylinder capacity of not less than 300 cm3 and a power of not less than 6 kW but not exceeding 20,0 kW, for the manufacture of:

—

self-propelled lawn mowers, with a seat of subheading 8433 11 51 , and hand-operated lawn mowers of heading 8433 11 90 ,

—

tractors of subheading 8701 90 11 , whose main function is that of a lawn mower,

—

four stroke mowers with motor of a cylinder capacity of not less than 300 cc of subheading 8433 20 10 or

—

snowploughs and snow blowers of subheading 8430 20  (1)

0  %

31.12.2017

ex 8408 90 43

ex 8408 90 45

ex 8408 90 47

30

20

30

4 Cylinder, 4 cycle, liquid cooled, compression-ignition engine having:

—

a capacity of not more than 3 850  cm3, and

—

a rated output of 15 kW or more but not more than 55 kW,

for use in the manufacture of vehicles of heading 8 427  (1)

0  %

31.12.2017

ex 8411 99 00

30

Wheel-shaped gas turbine component with blades, of a kind used in turbochargers:

—

of a precision-cast nickel based alloy complying with standard DIN G- NiCr13Al16MoNb or DIN NiCo10W10Cr9AlTi or AMS AISI:686,

—

with a heat-resistance of not more than 1 100  °C;

—

with a diameter of 30 mm or more, but not more than 80 mm;

—

with a height of 30 mm or more, but not more than 50 mm

0  %

31.12.2017

ex 8481 80 69

60

Four-way reversing valve for refrigerants, consisting of:

—

a solenoid pilot valve

—

a brass valve body including valve slider and copper connections

with a working pressure up to 4,5 MPa

0  %

31.12.2017

ex 8483 30 38

30

Cylindrical bearing housing:

—

of precision-cast grey cast iron complying with standard DIN EN 1561 ,

—

with oil chambers,

—

without bearings,

—

with a diameter of 60 mm or more, but not more than 180 mm,

—

with a height of 60 mm or more, but not more than 120 mm,

—

whether or not with water chambers and connectors

0  %

31.12.2017

ex 8501 31 00

70

DC motors, brushless, with:

—

an external diameter of 80 mm or more, but not more than 100 mm,

—

a supply voltage of 12 V,

—

an output at 20 °C of 300 W or more, but not more than 550 W,

—

a torque 20 °C of 2,90 Nm or more, but not more than 5,30 Nm,

—

a rated speed at 20 °C of 600 rpm or more, but not more than 1 200 rpm,

—

equipped with the rotor angle position sensor of resolver type or Hall effect type,

of the kind used in power steering systems for cars

0  %

31.12.2017

ex 8501 33 00

ex 8501 40 80

ex 8501 53 50

30

50

10

Electric drive for motor vehicles, with an output of not more than 315 kW, with:

—

an AC or DC motor whether or not with transmission,

—

power electronics

0  %

31.12.2016

ex 8501 62 00

30

Fuel cell system

—

consisting of at least phosphoric acid fuel cells,

—

in a housing with integrated water management and gas treatment,

—

for permanent, stationary energy supply

0  %

31.12.2017

ex 8504 31 80

20

Transformer for use in the manufacture of inverters in LCD modules (1)

0  %

31.12.2017

ex 8504 31 80

40

Electrical transformers:

—

with a capacity of 1 kVA or less

—

without plugs or cables,

for internal use in the manufacture of set top boxes and TVs (1)

0  %

31.12.2017

ex 8504 40 82

40

Printed circuit board equipped with a bridge rectifier circuit and other active and passive components

—

with two output connectors

—

with two input connectors which are available and useable in parallel

—

able to switch between bright and dimmed operation mode

—

with an input voltage of 40 V (+ 25 % – 15 %) or 42 V (+ 25 % – 15 %) in bright operation mode, with an input voltage of 30 V (± 4 V) in dimmed operation mode, or

—

with an input voltage of 230 V (+ 20 % – 15 %) in bright operation mode, with an input voltage of 160 V (± 15 %) in dimmed operation mode, or

—

with an input voltage of 120 V (15 % – 35 %) in bright operation mode, with an input voltage of 60 V (± 20 %) in dimmed operation mode

—

with an input current reaching 80 % of its nominal value within 20 ms

—

with an input frequency of 45 Hz or more, but not more than 65 Hz for 42 V and 230 V, and 45-70 Hz for 120 V versions

—

with an maximum inrush current overshoot of not more than 250 % of the input current

—

with a period of the inrush current overshoot of not more than 100 ms

—

with an input current undershoot of not less than 50 % of the input current

—

with a period of the inrush current undershoot of not more than 20 ms

—

with a presettable output current

—

with an output current reaching 90 % of its nominal pre-set value within 50 ms

—

with an output current reaching zero within 30 ms after removal of the input voltage

—

with an defined failure status in case of no-load or too-high load (end-of-life function)

0  %

30.6.2013

ex 8504 40 82

50

Transformer in a housing with

—

a rated power of not more than 30 W

—

an input voltage of 90 V or more, but not more than 305 V

—

an input frequency of 47 Hz or more, but not more than 63 Hz

—

a constant current output of 350 mA or more, but not more than 1 050  mA

—

an inrush current of not more than 10 A

—

an operating temperature range of – 20 °C or more, but not more than + 65 °C,

suitable for driving LEDs

0  %

31.12.2017

ex 8504 50 95

50

Solenoid coil with

—

a power consumption of not more than 6 W,

—

an insulation resistance of more than 100 M ohms, and

—

an insert hole of 11,4 mm or more, but not more than 11,8 mm

0  %

31.12.2017

ex 8505 11 00

33

Permanent magnets consisting of an alloy of neodymium, iron and boron, either in the shape of a rounded rectangle with measurements of not more than 15 mm × 10 mm × 2 mm, or in the shape of a disc with a diameter of not more than 90 mm, whether or not containing a hole in the centre

0  %

31.12.2013

ex 8505 11 00

50

Bars specifically shaped, intended to become permanent magnets after magnetisation, containing neodymium, iron and boron, with dimensions:

—

a length of 15 mm or more but not more than 52 mm,

—

a width of 5 mm or more but not more than 42 mm,

of a kind to be used in the manufacture of electric servomotors for industrial automation

0  %

31.12.2017

ex 8505 11 00

60

Rings, tubes, bushings or collars made from an alloy of neodymium, iron and boron, with

—

a diameter of not more than 45 mm,

—

a height of not more than 45 mm,

of a kind used in the manufacture of permanent magnets after magnetisation

0  %

31.12.2017

ex 8507 60 00

40

Batteries of ion-lithium electric accumulators rechargeable with:

—

a length of 1 203  mm or more, but not more than 1 297  mm,

—

a width of 282 mm or more, but not more than 772 mm,

—

a height of 792 mm or more, but not more than 839 mm,

—

a weight of 260 kg or more, but not more than 293 kg,

—

power of 22 kWh or 26 kWh, and

—

constituted of 24 or 48 modules

0  %

31.12.2017

ex 8507 60 00

50

Modules for the assembly of batteries of ion lithium electric accumulators with:

—

a length of 298 mm or more, but not more than 408 mm,

—

a width of 33,5 mm or more, but not more than 209 mm,

—

a height of 138 mm or more, but not more than 228 mm,

—

a weight of 3,6 kg or more, but not more than 17 kg, and

—

a power of 485 kWh or more, but not more than 2 158  kWh

0  %

31.12.2017

ex 8507 60 00

55

Lithium-ion accumulator in cylindrical form, with:

—

a base similar to an ellipse squeezed in the middle,

—

a length of 49 mm or more (not including terminals),

—

a width of 33,5 mm or more,

—

a thickness of 9,9 mm or more,

—

a rated capacity of 1,75 Ah or more, and

—

a rated voltage of 3,7 V,

for the manufacture of rechargeable batteries (1)

0  %

31.12.2017

ex 8507 60 00

57

Lithium-ion accumulator, cuboid in shape, with:

—

some of the corners rounded off,

—

a length of 76 mm or more (not including terminals),

—

a width of 54,5 mm or more,

—

a thickness of 5,2 mm or more,

—

a rated capacity of 3 100  mAh or more, and

—

a rated voltage of 3,7 V,

for the manufacture of rechargeable batteries (1)

0  %

31.12.2017

ex 8507 90 80

70

Cut plate of nickel-plated copper foil, with:

—

a width of 70 mm (± 5 mm),

—

a thickness of 0,4 mm (± 0,2 mm),

—

a length of not more than 55 mm,

for use in the manufacture of lithium-ion electric vehicle batteries (1)

0  %

31.12.2016

ex 8518 29 95

30

Loudspeakers of:

—

an impedance of 4 Ohm or more, but not more than 16 Ohm,

—

a nominal power of 2 W or more, but not more than 20 W,

—

with or without plastic bracket, and

—

with or without electric cable fitted with connectors,

of a kind used for TV sets and video monitors manufacture

0  %

31.12.2017

ex 8522 90 80

96

Hard disk drive, for incorporation in products of heading 8 521  (1)

0  %

31.12.2017

ex 8528 59 40

20

Liquid crystal display colour video monitor having a DC input voltage of 7 V or more but not more than 30 V, with a diagonal measurement of the screen of 33,2 cm or less,

—

either without housing, with back cover and mounting frame,

—

or with a housing specially designed for mounting,

suitable for the incorporation into goods of Chapters 84 to 90 and 94

0  %

31.12.2013

ex 8529 90 65

75

Modules comprising at least semiconductor chips for:

—

the generation of driving signals for pixel addressing, or

—

driving addressing pixels

0  %

31.12.2017

ex 8529 90 92

47

Area image sensors (‘progressive scan’ Interline CCD-Sensor or CMOS-Sensor) for digital video cameras in the form of analogue or digital, monolithic integrated circuit with pixels of not more than 12 μm × 12 μm in monochromic version with microlenses applied to each individual pixel (microlens array) or in polychromic version with a colour filter, whether or not with a lenslet (micro lens) array with one lenslet mounted on each individual pixel

0  %

31.12.2014

ex 8529 90 92

50

Colour LCD display panel for LCD monitors of heading 8 528 :

—

with a diagonal measurement of the screen of 14,48 cm or more but not more than 31,24 cm,

—

with backlight, micro-controller,

—

with a CAN (Controller area network)-controller with LVDS (Low-voltage differential signalling) interface and CAN/power supply socket or with an APIX (Automotive Pixel Link) controller with APIX interface,

—

in a housing with or without a heat sink at the back of the housing,

—

without a signal-processing module,

for use in the manufacture of vehicles of chapter 87 (1)

0  %

31.12.2015

ex 8536 69 90

81

Pitch connector for use in the manufacture of LCD television reception apparatus (1)

0  %

31.12.2017

ex 8536 69 90

87

D-subminiature (D-sub) type connectors, built into a plastic or metal housing, with 15 pins in 3 rows, for use in the manufacture of products falling within headings 8 521 and 8 528  (1)

0  %

31.12.2016

ex 8536 69 90

88

Secure Digital (SD), CompactFlash, ‘Smart Card’ and 64- pin PC-card female connectors, of a kind used for soldering on printed circuit boards, for connecting electrical apparatus and circuits and switching or protecting electrical circuits with a voltage of not more than 1 000  V

0  %

31.12.2017

ex 8537 10 91

30

Data processing and evaluation vehicle dashboard control module, operating through the CAN — bus protocol, containing at least:

—

microprocessor relays,

—

a stepper motor,

—

Electrically Erasable Programmable Read-Only (EEPROM) memory, and

—

other passive components (such as connectors, diodes, voltage stabiliser, resistors, capacitors, transistors),

with a voltage of 13,5 V

0  %

31.12.2017

ex 8543 90 00

40

Part of an electrolysis device, consisting of a pan of nickel equipped with a wire mesh of nickel, fixed via ribs of nickel, and a pan of titanium equipped with a wire mesh of titanium, fixed via ribs of titanium, of which both pans are fixed together back to back

0  %

31.12.2017

ex 8544 20 00

ex 8544 42 90

ex 8544 49 93

ex 8544 49 95

10

20

20

10

PET/PVC insulated flexible cable with:

—

a voltage of not more than 60 V,

—

a current of not more than 1 A,

—

a heat resistance of not more than 105 °C,

—

individual wires of a thickness of not more than 0,1 mm (± 0,01 mm) and a width of not more than 0,8 mm (± 0,03 mm),

—

a distance between conductors of not more than 0,5 mm and

—

a pitch (distance from centreline to centreline of conductors) of not more than 1,25 mm

0  %

31.12.2013

ex 8544 42 90

10

Data transmission cable capable of a bit rate transmission of 600 Mbit/s or more, with:

—

a voltage of 1,25 V (± 0,25 V)

—

connectors fitted at one or both ends, at least one of which contains pins with a pitch of 1 mm,

—

outer screening shielding,

used solely for communication between LCD, PDP or OLED panel and video processing electronic circuits

0  %

31.12.2013

ex 8548 90 90

50

Filters with a ferromagnetic core, used to suppress high frequency noise in electronic circuits, for the manufacture of TV sets and monitors of heading 8528  (1)

0  %

31.12.2017

ex 8704 23 91

20

Motor chassis with a self-ignition capacity of at least 8 000  cm3, fitted with a cabin on either 3, 4 or 5 wheels having a wheelbase of at least 480 cm, not containing working machinery, to be built into special purpose motor vehicles with a width of at least 300 cm (1)

0  %

31.12.2017

ex 9001 20 00

10

Material consisting of a polarising film, whether or not on rolls, supported on one or both sides by transparent material, whether or not with an adhesive layer, covered on one side or on both sides with a release film

0  %

31.12.2017

ex 9001 90 00

75

Front filter comprising glass panels with special printing and film coating, for use in the manufacture of plasma display modules (1)

0  %

31.12.2017

ex 9002 11 00

20

Lenses

—

measuring not more than 80 mm × 55 mm × 50 mm,

—

with a resolution of 160 lines/mm or better, and

—

with a zoom ratio of 18 times,

of a kind used for the production of visualisers or live image cameras

0  %

31.12.2017

ex 9002 11 00

30

Lenses

—

measuring not more than 180 mm × 100 mm × 100 mm at a maximum focal length of more than 200 mm,

—

with a resolution of 130 lines/mm or better, and

—

with a zoom ratio of 18 times

of a kind used for the production of visualisers or live image cameras

0  %

31.12.2017

ex 9002 11 00

40

Lenses

—

measuring not more than 125 mm × 65 mm × 65 mm,

—

with a resolution of 125 lines/mm or better, and

—

with a zoom ratio of 16 times

of a kind used for the production of visualisers or live image cameras

0  %

31.12.2017

ex 9002 11 00

70

Lenses

—

measuring not more than 180 mm × 100 mm × 100 mm at a maximum focal length of more than 200 mm,

—

with an etendue of 7 steradian mm2 or better, and

—

with a zoom ratio of 16 times

of a kind used for the production of visualisers or live image cameras

0  %

31.12.2017

ex 9032 89 00

40

Digital valve controller for controlling liquids and gases

0  %

31.12.2017

ex 9405 40 39

30

Electric light assembly containing:

—

printed circuit boards and

—

Light Emitting Diodes (LED)

for the manufacture of backlight units for flat TV sets (1)

0  %

30.6.2013

(1)  Suspension of duties is subject to Articles 291 to 300 of Commission Regulation (EEC) No 2454/93 (OJ L 253, 11.10.1993, p. 1).

(2)  The specific additional duty is applicable.

(3)  A surveillance of imports of goods covered by this tariff suspension shall be established in accordance with the procedure laid down in Article 308d of the Regulation (EEC) No 2454/93.

ANNEX II

CN code

TARIC

ex 2008 60 19

30

ex 2008 60 39

30

ex 2008 93 91

20

ex 2009 49 30

91

ex 2710 12 25

10

ex 2805 30 90

30

ex 2823 00 00

10

ex 2835 10 00

10

ex 2839 19 00

10

ex 2841 80 00

10

ex 2841 90 85

10

ex 2850 00 20

30

ex 2904 10 00

40

ex 2914 19 90

20

ex 2914 19 90

30

ex 2914 19 90

40

ex 2914 39 00

30

ex 2914 39 00

40

ex 2914 50 00

60

ex 2914 50 00

70

ex 2916 39 90

55

ex 2917 39 95

40

ex 2918 23 00

10

ex 2920 19 00

10

ex 2921 30 99

20

ex 2921 30 99

30

ex 2921 59 90

30

ex 2922 49 85

60

ex 2924 29 98

35

ex 2924 29 98

86

ex 2928 00 90

75

ex 2928 00 90

80

ex 2928 00 90

85

ex 2930 20 00

10

ex 2930 90 99

66

ex 2930 90 99

67

ex 2930 90 99

68

ex 2930 90 99

69

ex 2930 90 99

71

ex 2930 90 99

82

ex 2930 90 99

83

ex 2932 99 00

60

ex 2933 19 90

40

ex 2933 29 90

40

ex 2933 39 99

55

ex 2933 69 80

35

ex 2933 69 80

55

ex 2933 79 00

30

ex 2933 99 80

50

ex 2933 99 80

73

ex 2933 99 80

89

ex 2934 20 80

40

ex 2934 99 90

15

ex 2934 99 90

23

ex 2934 99 90

74

ex 2934 99 90

78

ex 2934 99 90

83

ex 2934 99 90

84

ex 3204 15 00

10

ex 3204 17 00

30

ex 3204 17 00

75

ex 3208 90 19

75

ex 3208 90 91

10

ex 3402 13 00

20

ex 3808 91 90

10

ex 3808 91 90

50

ex 3808 92 90

10

ex 3808 93 15

10

ex 3808 93 27

20

ex 3815 19 90

41

ex 3815 90 90

16

ex 3815 90 90

85

ex 3815 90 90

89

ex 3824 90 97

33

ex 3824 90 97

36

ex 3824 90 97

37

ex 3824 90 97

38

ex 3824 90 97

44

ex 3824 90 97

47

ex 3824 90 97

70

ex 3824 90 97

78

ex 3901 10 10

10

ex 3901 20 90

30

ex 3903 90 90

35

ex 3903 90 90

86

ex 3906 10 00

10

ex 3907 99 90

60

ex 3909 40 00

20

ex 3910 00 00

50

ex 3911 90 19

30

ex 3919 10 80

45

ex 3919 10 80

55

ex 3919 90 00

25

ex 3919 90 00

26

ex 3919 90 00

28

ex 3919 90 00

45

ex 3919 90 00

47

ex 3919 90 00

53

ex 3919 90 00

55

ex 3920 20 29

94

ex 3920 51 00

10

ex 3920 51 00

40

ex 3920 62 19

41

ex 3920 62 19

43

ex 3920 62 19

80

ex 3920 62 19

82

ex 3920 79 90

10

ex 3920 92 00

30

ex 5407 10 00

10

ex 5603 11 10

20

ex 5603 11 90

20

ex 5603 12 90

50

ex 5603 12 90

70

ex 5603 13 90

70

ex 5603 92 90

40

ex 5603 92 90

70

ex 5603 92 90

80

ex 5603 93 90

10

ex 5603 93 90

50

ex 5603 94 90

40

ex 7005 10 25

10

ex 7005 10 30

10

ex 7006 00 90

60

ex 7007 19 20

20

ex 7326 90 98

40

ex 7410 22 00

10

ex 7601 20 99

10

ex 7604 29 10

10

ex 7606 12 92

20

ex 7606 12 99

20

ex 7607 11 90

20

ex 7607 11 90

30

ex 7607 20 90

10

ex 8108 90 30

20

ex 8108 90 50

30

ex 8108 90 50

40

ex 8108 90 50

50

ex 8113 00 90

10

ex 8407 31 00

10

ex 8407 33 00

10

ex 8407 90 80

10

ex 8407 90 90

10

ex 8412 21 80

50

ex 8419 89 98

30

ex 8419 89 98

40

ex 8462 21 80

10

ex 8477 59 80

10

ex 8501 33 00

30

ex 8501 40 80

50

ex 8501 53 50

10

ex 8504 31 80

20

ex 8504 40 82

40

ex 8505 11 00

33

ex 8507 90 80

70

ex 8522 90 80

96

ex 8528 59 40

20

ex 8529 90 49

10

ex 8529 90 65

75

ex 8529 90 65

80

ex 8529 90 92

46

ex 8529 90 92

47

ex 8529 90 92

50

ex 8529 90 92

60

ex 8536 69 90

81

ex 8536 69 90

87

ex 8540 91 00

95

ex 8543 90 00

40

ex 8544 42 90

10

ex 8544 49 93

20

ex 8704 23 91

20

ex 9001 20 00

10

ex 9001 20 00

40

ex 9001 90 00

75

ex 9032 10 89

20

ex 9032 89 00

40

ex 9405 40 39

30

Top