EUR-Lex Access to European Union law

Back to EUR-Lex homepage

This document is an excerpt from the EUR-Lex website

Document 32020R0875

Council Regulation (EU) 2020/875 of 15 June 2020 amending Regulation (EU) No 1388/2013 quotas of the Union for certain agricultural and industrial products

ST/7813/2020/INIT

OJ L 204, 26.6.2020, p. 34–45 (BG, ES, CS, DA, DE, ET, EL, EN, FR, GA, HR, IT, LV, LT, HU, MT, NL, PL, PT, RO, SK, SL, FI, SV)

In force

ELI: http://data.europa.eu/eli/reg/2020/875/oj

26.6.2020   

EN

Official Journal of the European Union

L 204/34


COUNCIL REGULATION (EU) 2020/875

of 15 June 2020

amending Regulation (EU) No 1388/2013 quotas of the Union for certain agricultural and industrial products

THE COUNCIL OF THE EUROPEAN UNION,

Having regard to the Treaty on the Functioning of the European Union, and in particular Article 31 thereof,

Having regard to the proposal from the European Commission,

Whereas:

(1)

In order to ensure a sufficient and uninterrupted supply of certain agricultural and industrial products which are produced in insufficient quantities in the Union, and thereby avoid any disturbances in the market for those products, autonomous tariff quotas were opened by Council Regulation (EU) No 1388/2013 (1). Within those tariff quotas, products can be imported into the Union at reduced or zero duty rates.

(2)

As it is in the Union’s interest to ensure an adequate supply of certain industrial products, and having regard to the fact that identical, equivalent or substitute products are not produced in sufficient quantities within the Union, it is necessary to open new tariff quotas for order numbers 09.2580, 09.2581 and 09.2583 at zero duty rates for appropriate quantities of those products.

(3)

As is it in the Union’s interest to ensure an adequate supply of certain industrial products, the amounts for the tariff quotas for order numbers 09.2634 and 09.2668 should be increased.

(4)

As the scope of the tariff quota for order number 09.2652 has become inadequate to fulfil the needs of economic operators in the Union, the description of the product covered by that tariff quota should be amended.

(5)

For the tariff quota for order number 09.2588, the quota period should be extended until 31 December 2020, because that tariff quota was opened for a period of six months only but it is still in the Union’s interest to maintain it.

(6)

The substances Dimethyl Sulphate (CAS RN 77-78-1) with a purity of at least 99 %, 2-Methylaniline (CAS RN 95-53-4) with a purity by weight of at least 99 % and 4,4'-Methanediyldianiline (CAS RN 101-77-9) with a purity by weight of at least 97 % are included on the candidate list referred to in Article 59 of Regulation (EC) No 1907/2006 of the European Parliament and of the Council (2) and the substance with CAS RN 101-77-9 is included in Annex XIV to that Regulation. For that reason, existing tariff quotas for those substances should be progressively closed and any newly opened tariff quotas should apply for a limited period. Therefore, the tariff quotas with order numbers 09.2648 and 09.2730 should apply until 31 December 2020 with a conventional rate of duty at 2 %. In addition, the tariff quota with order number 09.2590 should be closed and a new tariff quota with order number 09.2582 should be opened until 31 December 2020 with a conventional rate of duty at 2 %.

(7)

Taking into account the amendments to be made, and for the sake of clarity, the Annex to Regulation (EU) No 1388/2013 should be replaced.

(8)

In order to avoid any interruption of the application of the tariff quota scheme, and to comply with the guidelines in the communication from the Commission of 13 December 2011 concerning autonomous tariff suspensions and quotas, the changes provided for in this Regulation regarding the tariff quotas for the products concerned should apply from 1 July 2020. This Regulation should therefore enter into force as a matter of urgency,

HAS ADOPTED THIS REGULATION:

Article 1

The Annex to Regulation (EU) No 1388/2013 is replaced by the text appearing in the Annex to this Regulation.

Article 2

This Regulation shall enter into force on the day following that of its publication in the Official Journal of the European Union.

It shall apply from 1 July 2020.

This Regulation shall be binding in its entirety and directly applicable in all Member States.

Done at Brussels, 15 June 2020.

For the Council

The President

A. METELKO-ZGOMBIĆ


(1)  Council Regulation (EU) No 1388/2013 of 17 December 2013 opening and providing for the management of autonomous tariff quotas of the Union for certain agricultural and industrial products, and repealing Regulation (EU) No 7/2010 (OJ L 354, 28.12.2013, p. 319).

(2)  Regulation (EC) No 1907/2006 of the European Parliament and of the Council of 18 December 2006 concerning the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH), establishing a European Chemicals Agency, amending Directive 1999/45/EC and repealing Council Regulation (EEC) No 793/93 and Commission Regulation (EC) No 1488/94 as well as Council Directive 76/769/EEC and Commission Directives 91/155/EEC, 93/67/EEC, 93/105/EC and 2000/21/EC (OJ L 396, 30.12.2006, p. 1).


ANNEX

‘ANNEX

Order number

CN code

TARIC

Description

Quota period

Quota volume

Quota duty (%)

09.2637

ex 0710 40 00

ex 2005 80 00

20

30

Corn cobs (Zea mays var. saccharata) whether or not cut, with a diameter of at least 10 mm but not more than 20 mm, for use in the manufacture of products of the food industry for treatment other than simple repacking (1)  (2)  (3)

1.1.-31.12.

550 tonnes

0 % (3)

09.2849

ex 0710 80 69

10

Mushrooms of the species Auricularia polytricha (uncooked or cooked by steaming or boiling), frozen, for the manufacture of prepared meals (1)  (2)

1.1.-31.12.

700 tonnes

0 %

09.2664

ex 2008 60 39

30

Sweet cherries containing added spirit, with a sugar content of not more than 9 % by weight, of a diameter of not more than 19,9 mm, with stones, for use in chocolate products (2)

1.1.-31.12.

1 000 tonnes

10 %

09.2740

ex 2309 90 31

87

Soya bean protein concentrate containing by weight:

60 % (± 10 %) of crude protein,

5 % (± 3 %) of crude fibre,

5 % (± 3 %) of crude ash, and

at least 3 % but not more than 6,9 % of starch,

for use in the manufacture of animal feed products (2)

1.1.-31.12.

30 000 tonnes

0 %

09.2913

ex 2401 10 35

ex 2401 10 70

ex 2401 10 95

ex 2401 10 95

ex 2401 10 95

ex 2401 20 35

ex 2401 20 70

ex 2401 20 95

ex 2401 20 95

ex 2401 20 95

91

10

11

21

91

91

10

11

21

91

Natural unmanufactured tobacco, whether or not cut in regular size, with a custom value of at least EUR 450 per 100 kg net weight, for use as binder or wrapper for the manufacture of goods falling within subheading 2402 10 00  (2)

1.1.-31.12.

6 000 tonnes

0 %

09.2587

ex 2710 19 81

ex 2710 19 99

20

40

Catalytically hydroisomerised and dewaxed base oil of hydrogenated, highly isoparaffinic hydrocarbons, containing:

at least 90 % by weight of saturates, and

not more than 0,03 % by weight of sulphur,

and with

a viscosity index of at least 80 but less than 120, and

a kinematic viscosity of at least 5,0 cSt at 100 °C but not more than 13,0 cSt at 100 °C

1.7.-31.12.

200 000 tonnes

0 %

09.2828

2712 20 90

 

Paraffin wax containing by weight less than 0,75 % of oil

1.4.-31.10.

60 000 tonnes

0 %

09.2600

ex 2712 90 39

10

Slack wax (CAS RN 64742-61-6)

1.1.-31.12.

100 000 tonnes

0 %

09.2928

ex 2811 22 00

40

Silica filler in the form of granules, with a purity by weight of at least 97 % of silicon dioxide

1.1.-31.12.

1 700 tonnes

0 %

09.2806

ex 2825 90 40

30

Tungsten trioxide, including blue tungsten oxide (CAS RN 1314-35-8 or CAS RN 39318-18-8)

1.1.-31.12.

12 000 tonnes

0 %

09.2872

ex 2833 29 80

40

Caesium sulphate (CAS RN 10294-54-9) in solid form or as aqueous solution containing by weight at least 48 % but not more than 52 % of caesium sulphate

1.1.-31.12.

200 tonnes

0 %

09.2837

ex 2903 79 30

20

Bromochloromethane (CAS RN 74-97-5)

1.1.-31.12.

600 tonnes

0 %

09.2933

ex 2903 99 80

30

1,3-Dichlorobenzene (CAS RN 541-73-1)

1.1.-31.12.

2 600 tonnes

0 %

09.2700

ex 2905 12 00

10

Propan-1-ol (propyl alcohol) (CAS RN 71-23-8)

1.1.-31.12.

15 000 tonnes

0 %

09.2830

ex 2906 19 00

40

Cyclopropylmethanol (CAS RN 2516-33-8)

1.1.-31.12.

20 tonnes

0 %

09.2851

ex 2907 12 00

10

o-Cresol (CAS RN 95-48-7) with a purity by weight of at least 98,5 %

1.1.-31.12.

20 000 tonnes

0 %

09.2704

ex 2909 49 80

20

2,2,2',2'-Tetrakis(hydroxymethyl)-3,3'-oxydipropan-1-ol (CAS RN 126-58-9)

1.1.-31.12.

500 tonnes

0 %

09.2624

2912 42 00

 

Ethylvanillin (3-ethoxy-4-hydroxybenzaldehyde) (CAS RN 121-32-4)

1.1.-31.12.

1 950 tonnes

0 %

09.2683

ex 2914 19 90

50

Calcium acetylacetonate (CAS RN 19372-44-2) for use in the manufacture of stabilisator systems in tablet form (2)

1.1.-31.12.

200 tonnes

0 %

09.2852

ex 2914 29 00

60

Cyclopropyl methyl ketone (CAS RN 765-43-5)

1.1.-31.12.

300 tonnes

0 %

09.2638

ex 2915 21 00

10

Acetic acid (CAS RN 64-19-7) of a purity by weight of at least 99 %

1.1.-31.12.

1 000 000 tonnes

0 %

09.2972

2915 24 00

 

Acetic anhydride (CAS RN 108-24-7)

1.1.-31.12.

50 000 tonnes

0 %

09.2679

2915 32 00

 

Vinyl acetate (CAS RN 108-05-4)

1.1.-31.12.

400 000 tonnes

0 %

09.2728

ex 2915 90 70

85

Ethyl trifluoroacetate (CAS RN 383-63-1)

1.1.-31.12.

400 tonnes

0 %

09.2665

ex 2916 19 95

30

Potassium (E,E)-hexa-2,4-dienoate (CAS RN 24634-61-5)

1.1.-31.12.

8 250 tonnes

0 %

09.2684

ex 2916 39 90

28

2,5-Dimethylphenylacetyl chloride (CAS RN 55312-97-5)

1.1.-31.12.

400 tonnes

0 %

09.2599

ex 2917 11 00

40

Diethyl oxalate (CAS RN 95-92-1)

1.1.-31.12.

500 tonnes

0 %

09.2769

ex 2917 13 90

10

Dimethyl sebacate (CAS RN 106-79-6)

1.1.-31.12.

1 000 tonnes

0 %

09.2634

ex 2917 19 80

40

Dodecanedioic acid (CAS RN 693-23-2) with a purity by weight of more than 98,5 %

1.7.-31.12.

4 000 tonnes

0 %

09.2808

ex 2918 22 00

10

O-Acetylsalicylic acid (CAS RN 50-78-2)

1.1.-31.12.

120 tonnes

0 %

09.2646

ex 2918 29 00

75

Octadecyl 3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate (CAS RN 2082-79-3) with:

a sieve passing fraction at a mesh width of 500 μm of more than 99 % by weight, and

a melting point of at least 49 °C but not more than 54 °C,

for use in the manufacture of PVC processing stabilizer-one packs based on powder mixtures (powders or press granulates) (2)

1.1.-31.12.

380 tonnes

0 %

09.2647

ex 2918 29 00

80

Pentaerythritol tetrakis(3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate) (CAS RN 6683-19-8) with:

a sieve passing fraction at a mesh width of 250 μm of more than 75 % by weight and at a mesh width of 500 μm of more than 99 % by weight, and

a melting point of at least 110 °C but not more than 125 °C,

for use in the manufacture of PVC processing stabilizer-one packs based on powder mixtures (powders or press granulates) (2)

1.1.-31.12.

140 tonnes

0 %

09.2975

ex 2918 30 00

10

Benzophenone-3,3',4,4'-tetracarboxylic dianhydride (CAS RN 2421-28-5)

1.1.-31.12.

1 000 tonnes

0 %

09.2688

ex 2920 29 00

70

Tris (2,4-di-tert-butylphenyl)phosphite (CAS RN 31570-04-4)

1.1.-31.12.

6 000 tonnes

0 %

09.2648

ex 2920 90 10

75

Dimethyl Sulphate (CAS RN 77-78-1) with a purity of at least 99 %

1.7.-31.12.

9 000 tonnes

2 %

09.2598

ex 2921 19 99

75

Octadecylamine (CAS RN 124-30-1)

1.1.-31.12.

400 tonnes

0 %

09.2649

ex 2921 29 00

60

Bis(2-dimethylaminoethyl)(methyl)amine (CAS RN 3030-47-5)

1.1.-31.12.

1 700 tonnes

0 %

09.2682

ex 2921 41 00

10

Aniline (CAS RN 62-53-3) with a purity by weight of at least 99 %

1.1.-31.12.

150 000 tonnes

0 %

09.2617

ex 2921 42 00

89

4-Fluoro-N-(1-methylethyl)benzeneamine (CAS RN 70441-63-3)

1.1.-31.12.

500 tonnes

0 %

09.2582

ex 2921 43 00

80

2-Methylaniline (CAS RN 95-53-4) with a purity by weight of at least 99 %

1.7.-31.12.

1 999 tonnes

2 %

09.2602

ex 2921 51 19

10

O-Phenylenediamine (CAS RN 95-54-5)

1.1.-31.12.

1 800 tonnes

0 %

09.2730

ex 2921 59 90

85

4,4'-Methanediyldianiline (CAS RN 101-77-9) with a purity by weight of at least 97 %, in the form of granules, for use in the manufacture of prepolymers (2)

1.7.-31.12.

100 tonnes

2 %

09.2591

ex 2922 41 00

10

L-Lysine hydrochloride (CAS RN 657-27-2)

1.1.-31.12.

445 000 tonnes

0 %

09.2592

ex 2922 50 00

25

L-Threonine (CAS RN 72-19-5)

1.1.-31.12.

166 000 tonnes

0 %

09.2854

ex 2924 19 00

85

3-iodoprop-2-yn-1-yl butylcarbamate (CAS RN 55406-53-6)

1.1.-31.12.

250 tonnes

0 %

09.2874

ex 2924 29 70

87

Paracetamol (INN) (CAS RN 103-90-2)

1.1.-31.12.

20 000 tonnes

0 %

09.2742

ex 2926 10 00

10

Acrylonitrile (CAS RN 107-13-1), for use in the manufacture of goods of Chapter 55 and Heading 6815 (2)

1.1.-31.12.

60 000 tonnes

0 %

09.2583

ex 2926 10 00

20

Acrylonitrile (CAS RN 107-13-1), for use in the manufacture of goods of Headings 2921, 2924, 3906 and 4002 (2)

1.7.-31.12.

20 000 tonnes

0 %

09.2856

ex 2926 90 70

84

2-Nitro-4(trifluoromethyl)benzonitrile (CAS RN 778-94-9)

1.1.-31.12.

900 tonnes

0 %

09.2708

ex 2928 00 90

15

Monomethylhydrazine (CAS RN 60-34-4) in the form of an aqueous solution with a content by weight of monomethylhydrazine of 40 % (± 5 %)

1.1.-31.12.

900 tonnes

0 %

09.2581

ex 2929 10 00

25

1,5-Naphthylene diisocyanate (CAS RN 3173-72-6) with a purity by weight of at least 90 %

1.7.-31.12.

205 tonnes

0 %

09.2685

ex 2929 90 00

30

Nitroguanidine (CAS RN 556-88-7)

1.1.-31.12.

6 500 tonnes

0 %

09.2597

ex 2930 90 98

94

Bis[3-(triethoxysilyl)propyl]disulphide (CAS RN 56706-10-6)

1.1.-31.12.

6 000 tonnes

0 %

09.2596

ex 2930 90 98

96

2-Chloro-4-(methylsulphonyl)-3-((2,2,2-trifluoroethoxy)methyl) benzoic acid (CAS RN 120100-77-8)

1.1.-31.12.

300 tonnes

0 %

09.2580

ex 2931 90 00

75

Hexadecyltrimethoxysilane (CAS RN 16415-12-6) with a purity by weight of at least 95 %, for use in the manufacture of polyethylene (2)

1.7.-31.12.

83 tonnes

0 %

09.2842

2932 12 00

 

2-Furaldehyde (furfuraldehyde)

1.1.-31.12.

10 000 tonnes

0 %

09.2955

ex 2932 19 00

60

Flurtamone (ISO) (CAS RN 96525-23-4)

1.1.-31.12.

300 tonnes

0 %

09.2696

ex 2932 20 90

25

Decan-5-olide (CAS RN 705-86-2)

1.1.-31.12.

6 000 kilograms

0 %

09.2697

ex 2932 20 90

30

Dodecan-5-olide (CAS RN 713-95-1)

1.1.-31.12.

6 000 kilograms

0 %

09.2812

ex 2932 20 90

77

Hexan-6-olide (CAS RN 502-44-3)

1.1.-31.12.

4 000 tonnes

0 %

09.2858

2932 93 00

 

Piperonal (CAS RN 120-57-0)

1.1.-31.12.

220 tonnes

0 %

09.2673

ex 2933 39 99

43

2,2,6,6-Tetramethylpiperidin-4-ol (CAS RN 2403-88-5)

1.1.-31.12.

1 000 tonnes

0 %

09.2674

ex 2933 39 99

44

Chlorpyrifos (ISO) (CAS RN 2921-88-2)

1.1.-31.12.

9 000 tonnes

0 %

09.2880

ex 2933 59 95

39

Ibrutinib (INN) (CAS RN 936563-96-1)

1.1.-31.12.

5 tonnes

0 %

09.2860

ex 2933 69 80

30

1,3,5-Tris[3-(dimethylamino)propyl]hexahydro-1,3,5-triazine (CAS RN 15875-13-5)

1.1.-31.12.

600 tonnes

0 %

09.2595

ex 2933 99 80

49

1,4,7,10-Tetraazacyclododecane (CAS RN 294-90-6)

1.1.-31.12.

40 tonnes

0 %

09.2658

ex 2933 99 80

73

5-(Acetoacetylamino)benzimidazolone (CAS RN 26576-46-5)

1.1.-31.12.

400 tonnes

0 %

09.2593

ex 2934 99 90

67

5-Chlorothiophene-2-carboxylic acid (CAS RN 24065-33-6)

1.1.-31.12.

45 000 kilograms

0 %

09.2675

ex 2935 90 90

79

4-[[(2-Methoxybenzoyl)amino]sulfonyl]benzoyl chloride (CAS RN 816431-72-8)

1.1.-31.12.

45 000 tonnes

0 %

09.2710

ex 2935 90 90

91

2,4,4-Trimethylpentan-2-aminium (3R,5S,6E)-7-{2-[(ethylsulfonyl)amino]-4-(4-fluorophenyl)-6-(propan-2-yl)pyrimidin-5-yl}-3,5-dihydroxyhept-6-enoate (CAS RN 917805-85-7)

1.1.-31.12.

5 000 kilograms

0 %

09.2945

ex 2940 00 00

20

D-Xylose (CAS RN 58-86-6)

1.1.-31.12.

400 tonnes

0 %

09.2686

ex 3204 11 00

75

Colourant C.I. Disperse Yellow 54 (CAS RN 7576-65-0) and preparations based thereon with a colourant C.I. Disperse Yellow 54 content of at least 99 % by weight

1.1.-31.12.

250 tonnes

0 %

09.2676

ex 3204 17 00

14

Preparations based on colourant C.I. Pigment Red 48:2 (CAS RN 7023-61-2) with a content thereof of at least 60 % but less than 85 % by weight

1.1.-31.12.

50 tonnes

0 %

09.2698

ex 3204 17 00

30

Colourant C.I. Pigment Red 4 (CAS RN 2814-77-9) and preparations based thereon with a colourant C.I. Pigment Red 4 content of at least 60 % by weight

1.1.-31.12.

150 tonnes

0 %

09.2659

ex 3802 90 00

19

Soda flux calcinated diatomaceous earth

1.1.-31.12.

35 000 tonnes

0 %

09.2908

ex 3804 00 00

10

Sodium lignosulphonate (CAS RN 8061-51-6)

1.1.-31.12.

40 000 tonnes

0 %

09.2889

3805 10 90

 

Sulphate turpentine

1.1.-31.12.

25 000 tonnes

0 %

09.2935

ex 3806 10 00

10

Rosin and resin acids obtained from fresh oleoresins

1.1.-31.12.

280 000 tonnes

0 %

09.2832

ex 3808 92 90

40

Preparation containing at least 38 % but not more than 50 % by weight of pyrithione zinc (INN) (CAS RN 13463-41-7) in an aqueous dispersion

1.1.-31.12.

500 tonnes

0 %

09.2876

ex 3811 29 00

55

Additives consisting of reaction products of diphenylamine and branched nonenes containing by weight:

at least 28 % but not more than 55 % of 4-monononyldiphenylamine,

at least 45 % but not more than 65 % of 4,4'-dinonyldiphenylamine, and

not more than 5 % of 2,4-dinonyldiphenylamine and 2,4'-dinonyldiphenylamine,

used for the manufacture of lubricating oils (2)

1.1.-31.12.

900 tonnes

0 %

09.2814

ex 3815 90 90

76

Catalyst consisting of titanium dioxide and tungsten trioxide

1.1.-31.12.

3 000 tonnes

0 %

09.2820

ex 3824 79 00

10

Mixtures containing by weight:

at least 60 % but not more than 90 % of 2-chloropropene (CAS RN 557-98-2),

at least 8 % but not more than 14 % of (Z)-1-chloropropene (CAS RN 16136-84-8),

at least 5 % but not more than 23 % of 2-chloropropane (CAS RN 75-29-6),

not more than 6 % of 3-chloropropene (CAS RN 107-05-1), and

not more than 1 % of ethyl chloride (CAS RN 75-00-3)

1.1.-31.12.

6 000 tonnes

0 %

09.2644

ex 3824 99 92

77

Preparation containing by weight:

at least 55 % but not more than 78 % of dimethyl glutarate (CAS RN 1119-40-0),

at least 10 % but not more than 30 % of dimethyl adipate (CAS RN 627-93-0), and

not more than 35 % of dimethyl succinate (CAS RN 106-65-0)

1.1.-31.12.

10 000 tonnes

0 %

09.2681

ex 3824 99 92

85

Mixture of bis[3-(triethoxysilyl)propyl]sulphides (CAS RN 211519-85-6)

1.1.-31.12.

9 000 tonnes

0 %

09.2650

ex 3824 99 92

87

Acetophenone (CAS RN 98-86-2) with a purity by weight of at least 60 % but not more than 90 %

1.1.-31.12.

2 000 tonnes

0 %

09.2888

ex 3824 99 92

89

Mixture of tertiary alkyldimethyl amines containing by weight:

at least 60 % but not more than 80 % of dodecyldimethylamine (CAS RN 112-18-5), and

at least 20 % but not more than 30 % of dimethyl(tetradecyl)amine (CAS RN 112-75-4)

1.1.-31.12.

25 000 tonnes

0 %

09.2829

ex 3824 99 93

43

Solid extract of the residual, insoluble in aliphatic solvents, obtained during the extraction of rosin from wood, with the following characteristics:

a resin acid content not exceeding 30 % by weight,

an acid number not exceeding 110, and

a melting point of at least 100 °C

1.1.-31.12.

1 600 tonnes

0 %

09.2907

ex 3824 99 93

67

Mixture of phytosterols, in the form of powder, containing by weight:

at least 75 % of sterols,

not more than 25 % of stanols,

for use in the manufacture of stanols/sterols or stanol/sterol esters (2)

1.1.-31.12.

2 500 tonnes

0 %

09.2639

3905 30 00

 

Poly(vinyl alcohol), whether or not containing unhydrolysed acetate groups

1.1.-31.12.

15 000 tonnes

0 %

09.2671

ex 3905 99 90

81

Poly(vinyl butyral)(CAS RN 63148-65-2):

containing by weight at least 17,5 % but not more than 20 %, of hydroxyl groups, and

with a median particle size (D50) of more than 0,6 mm

1.1.-31.12.

12 500 tonnes

0 %

09.2846

ex 3907 40 00

25

Polymer blend of polycarbonate and poly(methyl methacrylate) with a polycarbonate content of at least 98,5 % by weight, in the form of pellets or granules, with a luminous transmittance of at least 88,5 %, measured using a test sample with a thickness of 4 mm at a wavelength of λ = 400 nm (according to ISO 13468-2)

1.1.-31.12.

2 000 tonnes

0 %

09.2723

ex 3911 90 19

10

Poly(oxy-1,4-phenylenesulphonyl-1,4-phenyleneoxy-4,4'-biphenylene)

1.1.-31.12.

5 000 tonnes

0 %

09.2816

ex 3912 11 00

20

Cellulose acetate flakes

1.1.-31.12.

75 000 tonnes

0 %

09.2864

ex 3913 10 00

10

Sodium alginate, extracted from brown seaweed (CAS RN 9005-38-3)

1.1.-31.12.

10 000 tonnes

0 %

09.2641

ex 3913 90 00

87

Sodium hyaluronate, non-sterile, with:

a weight average molecular weight (Mw) of not more than 900 000 ,

an endotoxin level of not more than 0,008 Endotoxin units (EU)/mg,

an ethanol content of not more than 1 % by weight,

an isopropanol content of not more than 0,5 % by weight

1.1.-31.12.

200 kilograms

0 %

09.2661

ex 3920 51 00

50

Sheets of polymethylmethacrylate conforming to standards:

EN 4364 (MIL-P-5425E) and DTD5592A, or

EN 4365 (MIL-P-8184) and DTD5592A

1.1.-31.12.

100 tonnes

0 %

09.2645

ex 3921 14 00

20

Cellular block of regenerated cellulose, impregnated with water containing magnesium chloride and quaternary ammonium compounds, measuring 100 cm (± 10 cm) x 100 cm (± 10 cm) x 40 cm (± 5 cm)

1.1.-31.12.

1 700 tonnes

0 %

09.2848

ex 5505 10 10

10

Waste of synthetic fibres (including noils, yarn waste, and garnetted stock) of nylon or other polyamides (PA6 and PA66)

1.1.-31.12.

10 000 tonnes

0 %

09.2721

ex 5906 99 90

20

Woven and laminated rubberised textile fabric with the following characteristics:

three layers,

one outer layer consists of acrylic fabric,

the other outer layer consists of polyester fabric,

the middle layer consists of chlorobutyl rubber,

the middle layer has a weight of at least 452 g/m2 but not more than 569 g/m2,

the textile fabric has a total weight of at least 952 g/m2 but not more than 1159 g/m2, and

the textile fabric has a total thickness of at least 0,8 mm but not more than 4 mm,

used for the manufacture of the retractable roof of motor vehicles (2)

1.1.-31.12.

375 000 square metres

0 %

09.2594

ex 6909 19 00

55

Ceramic-carbon absorption cartridge with the following characteristics:

extruded fired ceramic bound multicellular cylindrical structure,

at least 10 % by weight but not more than 30 % by weight of activated carbon,

at least 70 % by weight but not more than 90 % by weight of ceramic binder,

a diameter of at least 29 mm but not more than 41mm,

a length of not more than 150 mm,

fired at a temperature of at least 800 °C, and

for vapours adsorption

of a kind used for assembly in fuel vapours absorbers in fuel systems of motor vehicles

1.1.-31.12.

1 000 000 pieces

0 %

09.2866

ex 7019 12 00

ex 7019 12 00

06

26

S glass stratifils (rovings):

composed of continuous glass filaments of 9 μm (±0,5 μm),

measuring at least 200 tex but not more than 680 tex,

not containing any calcium oxide, and

with a breaking strength of more than 3 550 MPa determined by ASTM D2343-09,

for use in the manufacture of aeronautics (2)

1.1.-31.12.

1 000 tonnes

0 %

09.2628

ex 7019 52 00

10

Glass web woven from glass fibre coated in plastic, of a weight of 120 g/m2 (± 10 g/m2), of a type used in rolling insect screens with fixed frames

1.1.-31.12.

3 000 000 square metres

0 %

09.2799

ex 7202 49 90

10

Ferro-chromium containing at least 1,5 % but not more than 4 % by weight of carbon and not more than 70 % of chromium

1.1.-31.12.

50 000 tonnes

0 %

09.2652

ex 7409 11 00

ex 7410 11 00

30

40

Refined copper foil and strips, electrolytically manufactured, with a thickness of at least 0,015 mm

1.1.-31.12.

1 020 tonnes

0 %

09.2734

ex 7409 19 00

20

Plates or sheets consisting of:

a layer of a silicon nitride ceramic with a thickness of at least 0,32 mm (±0,1 mm) but not more than 1,0 mm (±0,1 mm),

covered on both sides with a foil of refined copper with a thickness of 0,8 mm (±0,1 mm), and

on one side partially covered with a coating of silver

1.1.-31.12.

7 000 000 pieces

0 %

09.2662

ex 7410 21 00

55

Plates:

consisting of at least one layer of fibreglass fabric impregnated with epoxide resin,

covered on one or both sides with copper foil with a thickness of not more than 0,15 mm,

with a dielectric constant (DK) of less than 5,4 at 1 MHz, as measured according to IPC-TM-650 2.5.5.2,

with a loss tangent of less than 0,035 at 1 MHz, as measured according to IPC-TM-650 2.5.5.2,

with a comparative tracking index (CTI) of at least 600

1.1.-31.12.

80 000 square metres

0 %

09.2834

ex 7604 29 10

20

Aluminium alloy rods with a diameter of at least 200 mm but not more than 300 mm

1.1.-31.12.

2 000 tonnes

0 %

09.2835

ex 7604 29 10

30

Aluminium alloy rods with a diameter of at least 300,1 mm but not more than 533,4 mm

1.1.-31.12.

1 000 tonnes

0 %

09.2736

ex 7607 11 90

83

Aluminium and magnesium alloy strip or foil:

of an alloy conforming to standards 5182-H19 or 5052-H19,

in rolls with an outside diameter of at least 1 250 mm but not more than 1 350 mm,

of a thickness (tolerance –0,006 mm) of 0,15 mm, 0,16 mm, 0,18 mm or 0,20 mm,

of a width (tolerance ±0,3 mm) of 12,5 mm, 15,0 mm, 16,0 mm, 25,0 mm, 35,0 mm, 50,0 mm or 356 mm,

with a camber tolerance of not more than 0,4 mm/750 mm,

of a flatness measurement: I-unit ± 4,

with a tensile strength of more than (5182-H19) 365 MPa or (5052-H19) 320 MPa, and

of an elongation A50 of more than (5182-H19) 3 % or (5052-H19) 2,5 %,

for use in the manufacture of slats for blinds (2)

1.1.-31.12.

600 tonnes

0 %

09.2722

8104 11 00

 

Unwrought magnesium, containing at least 99,8 % by weight of magnesium

1.1.-31.12.

120 000 tonnes

0 %

09.2840

ex 8104 30 00

20

Magnesium powder:

of a purity by weight of at least 98 % but not more than 99,5 %, and

with a particle size of at least 0,2 mm but not more than 0,8 mm

1.1.-31.12.

2 000 tonnes

0 %

09.2629

ex 8302 49 00

91

Aluminium telescopic handle for use in the manufacture of luggage (2)

1.1.-31.12.

1 500 000 pieces

0 %

09.2720

ex 8413 91 00

50

Pump head for two cylinder high pressure pump made of forged steel, with:

milled threaded fittings with a diameter of at least 10 mm but not more than 36,8 mm, and

drilled fuel channels with a diameter of at least 3,5 mm but not more than 10 mm,

of a kind used in diesel injection systems

1.1.-31.12.

65 000 pieces

0 %

09.2738

ex 8482 99 00

30

Brass cages with the following characteristics:

continuously or centrifugally cast,

turned,

containing by weight at least 35 % but not more than 38 % of zinc,

containing by weight at least 0,75 % but not more than 1,25 % of lead,

containing by weight at least 1,0 % but not more than 1,4 % of aluminium, and

with a tensile strength of at least 415 Pa,

of a kind used for the manufacture of ball bearings

1.1.-31.12.

50 000 pieces

0 %

09.2763

ex 8501 40 20

ex 8501 40 80

40

30

Electric AC commutator motor, single-phase, with an output of at least 250 W, an input power of at least 700 W but not more than 2 700 W, an external diameter of more than 120 mm (±0,2 mm) but not more than 135 mm (±0,2 mm), a rated speed of more than 30 000 rpm but not more than 50 000 rpm, equipped with air-inducting ventilator, for use in the manufacture of vacuum cleaners (2)

1.1.-31.12

2 000 000 pieces

0 %

09.2588

ex 8529 90 92

56

LCD display with:

a touch panel,

at least one printed circuit board for simple slave device pixel addressing (Timing Controller function) and touch control, with EEPROM (Electrically Erasable Programmable Read-Only Memory) for display settings,

a diagonal screen measurement of at least 15 cm but not more than 21 cm,

a backlight,

a LVDS (Low Voltage Differential Signalling) and a power supply connector,

a viewing angle of at least 70 degrees, and

a luminance of at least 715 cd/m2,

for use in the manufacture of motor vehicles of Chapter 87 (2)

1.7.-31.12.

450 000 pieces

0 %

09.2672

ex 8529 90 92

ex 9405 40 39

75

70

Printed circuit board with LED diodes:

whether or not equipped with prisms/lenses, and

whether or not fitted with connector(s)

for the manufacture of backlight units for goods of Heading 8528 (2)

1.1.-31.12.

115 000 000 pieces

0 %

09.2003

ex 8543 70 90

63

Voltage controlled frequency generator, consisting of active and passive elements mounted on a printed circuit, contained in a housing with dimensions of not more than 30 mm × 30 mm

1.1.-31.12.

1 400 000 pieces

0 %

09.2910

ex 8708 99 97

75

Aluminium alloy support bracket, with mounting holes, whether or not with fixation nuts, for indirect connection of the gearbox to the car body for use in the manufacture of goods of Chapter 87 (2)

1.1.-31.12.

200 000 pieces

0 %

09.2694

ex 8714 10 90

30

Axle clamps, housings, fork bridges and clamping pieces, of aluminium alloy of a kind used for motor bikes

1.1.-31.12.

1 000 000 pieces

0 %

09.2668

ex 8714 91 10

ex 8714 91 10

ex 8714 91 10

21

31

75

Bicycle frame, constructed from carbon fibres and artificial resin, for use in the manufacture of bicycles (including electric bicycles) (2)

1.7.-31.12.

250 000 pieces

0 %

09.2589

ex 8714 91 10

ex 8714 91 10

ex 8714 91 10

23

33

70

Frame, constructed from aluminium or aluminium and carbon fibres, for the use in the manufacture of bicycles (including electric bicycles) (2)

1.1.-31.12.

8 000 000 pieces

0 %

09.2631

ex 9001 90 00

80

Unmounted glass lenses, prisms and cemented elements for use in the manufacture or repair of goods of CN codes 9002, 9005, 9013 10 and 9015 (2)

1.1.-31.12.

5 000 000 pieces

0 %


(1)  However, the suspension of tariff duties does not apply where the processing is carried out by retail or catering undertakings.

(2)  Suspension of duties is subject to end-use customs supervision in accordance with Article 254 of Regulation (EU) No 952/2013 of the European Parliament and of the Council of 9 October 2013 laying down the Union Customs Code (OJ L 269, 10.10.2013, p. 1).

(3)  Only the ad valorem duty is suspended. The specific duty continues to apply.


Top