This document is an excerpt from the EUR-Lex website
Document 32019R2146
Commission Regulation (EU) 2019/2146 of 26 November 2019 amending Regulation (EC) No 1099/2008 of the European Parliament and of the Council on energy statistics, as regards the implementation of updates for the annual, monthly and short-term monthly energy statistics (Text with EEA relevance)
Commission Regulation (EU) 2019/2146 of 26 November 2019 amending Regulation (EC) No 1099/2008 of the European Parliament and of the Council on energy statistics, as regards the implementation of updates for the annual, monthly and short-term monthly energy statistics (Text with EEA relevance)
Commission Regulation (EU) 2019/2146 of 26 November 2019 amending Regulation (EC) No 1099/2008 of the European Parliament and of the Council on energy statistics, as regards the implementation of updates for the annual, monthly and short-term monthly energy statistics (Text with EEA relevance)
IO L 325, 16.12.2019, p. 43–98
(BG, ES, CS, DA, DE, ET, EL, EN, FR, HR, IT, LV, LT, HU, MT, NL, PL, PT, RO, SK, SL, FI, SV)
In force
Relation | Act | Comment | Subdivision concerned | From | To |
---|---|---|---|---|---|
Modifies | 32008R1099 | Athchur | iarscríbhinn A | 05/01/2020 | |
Modifies | 32008R1099 | Athchur | iarscríbhinn B | 05/01/2020 | |
Modifies | 32008R1099 | Athchur | iarscríbhinn C | 05/01/2020 | |
Modifies | 32008R1099 | Athchur | iarscríbhinn D | 05/01/2020 |
Relation | Act | Comment | Subdivision concerned | From | To |
---|---|---|---|---|---|
Corrected by | 32019R2146R(01) | (CS, FR, HR, PT, RO) |
16.12.2019 |
EN |
Official Journal of the European Union |
L 325/43 |
COMMISSION REGULATION (EU) 2019/2146
of 26 November 2019
amending Regulation (EC) No 1099/2008 of the European Parliament and of the Council on energy statistics, as regards the implementation of updates for the annual, monthly and short-term monthly energy statistics
(Text with EEA relevance)
THE EUROPEAN COMMISSION,
Having regard to the Treaty on the Functioning of the European Union,
Having regard to Regulation (EC) No 1099/2008 of the European Parliament and of the Council of 22 October 2008 on energy statistics (1), and in particular Article 4(3) and Article 9(3) thereof,
Whereas:
(1) |
Regulation (EC) No 1099/2008 establishes a common framework for the production, transmission, evaluation and dissemination of comparable energy statistics in the Union. |
(2) |
Energy statistics need to evolve continuously due to the fast pace of technological progress, the evolution of Union energy policies and the importance of basing Union targets and the monitoring of progress in reaching them on official energy data. Regular updates of the European energy statistics reporting framework are therefore required to reflect growing or changing needs. |
(3) |
The Commission has identified several aspects of the annual, monthly and short-term monthly energy statistics that need to be updated. They concern notably greater disaggregation of the statistics on final energy consumption in industry, conceptual adjustments for natural gas trade definitions to improve consistency, rendering certain reporting items mandatory, and improving the timeliness of the monthly data collection for coal and electricity. The Commission has discussed and agreed with the Member States on several technical aspects, including the scope, feasibility, production costs, confidentiality and reporting burden with the Member States. |
(4) |
Regulation (EC) No 1099/2008 should therefore be amended accordingly. |
(5) |
The measures provided for in this Regulation are in accordance with the opinion of the European Statistical System Committee. |
HAS ADOPTED THIS REGULATION:
Article 1
The Annexes to Regulation (EC) No 1099/2008 are replaced by the text in the Annex to this Regulation.
Article 2
This Regulation shall enter into force on the twentieth day following its publication in the Official Journal of the European Union.
This Regulation shall be binding in its entirety and directly applicable in all Member States.
Done at Brussels, 26 November 2019.
For the Commission
The President
Jean-Claude JUNCKER
ANNEX
‘ANNEX A
CLARIFICATIONS OF TERMINOLOGY
This Annex supplies explanations, geographical notes and definitions of terms that are used in the other annexes, unless specified differently in these annexes.
1. GEOGRAPHICAL NOTES
For statistical reporting purposes only, the following geographical definitions apply:
— |
Australia excludes its external territories, |
— |
Denmark excludes the Faeroe Islands and Greenland, |
— |
France includes Monaco and the French overseas departments of Guadeloupe, Martinique, Guyane, Reunion and Mayotte, |
— |
Italy includes San Marino and the Vatican (Holy See), |
— |
Japan includes Okinawa |
— |
Portugal includes the Açores and Madeira, |
— |
Spain includes the Canary Islands, the Balearic Islands, and Ceuta and Melilla, |
— |
Switzerland does not include Liechtenstein, |
— |
United States includes the 50 states, the District of Columbia, the US Virgin Islands, Puerto Rico and Guam. |
2. AGGREGATES
Producers of electricity and heat are classified according to the purpose of production:
— |
main activity producers are privately- or publicly owned producers that generate electricity and/or heat for sale to third parties as their principal activity, |
— |
autoproducers are privately- or publicly owned producers that generate electricity and/or heat wholly or partly for their own use as an activity which supports their primary activity. |
Note: |
the Commission may further clarify the terminology by adding relevant NACE (1) references in accordance with the regulatory procedure with scrutiny referred to in Article 11(2), after a revision of the NACE classification has entered into force. |
2.1. Supply
2.1.1. Production/Indigenous Production
Quantities of fuels extracted or produced are calculated after any operation that removes inert matter. Production includes the quantities consumed by the producer during the production process (e.g. for heating or operation of equipment and auxiliaries), as well as supplies to other producers of energy for transformation or other uses.
‘Indigenous production’ means production from resources within a specific territory — national territory of the reporting country.
2.1.2. Recovered products
Applies to hard coal only. Slurries and waste-heap shale recovered by mines.
2.1.3. Receipts from other sources
Quantities of fuels whose production is covered in other fuel reporting, but which are mixed in other fuel and consumed as a mix. Further details of this component are to be provided as:
— |
Receipts from other sources: Coal |
— |
Receipts from other sources: Oil and petroleum products |
— |
Receipts from other sources: Natural Gas |
— |
Receipts from other sources: Renewables |
2.1.4. Imports/Exports
Unless otherwise specified, ‘imports’ refer to ultimate origin (the country in which the energy product was produced) for use in the country and ‘exports’ refer to the ultimate country of consumption of the produced energy product. Amounts are considered as imported or exported when they have crossed the political boundaries of the country, whether customs clearance has taken place or not.
Where no origin or destination can be reported ‘Non-specified/Other’ may be used.
2.1.5. International Marine Bunkers
Quantities of fuels delivered to ships of all flags that are engaged in international navigation. The international navigation may take place at sea, on inland lakes and waterways, and in coastal waters. The following are excluded:
— |
consumption by ships engaged in domestic navigation; the domestic/international split should be determined based on port of departure and port of arrival, and not by the flag or nationality of the ship; |
— |
consumption by fishing vessels; |
— |
consumption by military forces. |
2.1.6. Stock Changes
The difference between the opening stock level and closing stock level for stocks held on national territory. Unless specified differently, a stock build is shown as a negative number and a stock draw is shown as a positive number.
2.1.7. Opening and Closing Total Stocks On National Territory
All stocks on national territory, including stocks held by governments, by major consumers or by stockholding organisations, stocks held on board incoming ocean vessels, stocks held in bonded areas and stocks held for others, whether under bilateral government agreement or not. Opening and closing refers to the first and last day of the reporting period, respectively. Stock includes stocks held in all types of special storage facilities, either on the surface or underground.
2.1.8. Direct use
Oil (Crude oil and petroleum products) used directly without being processed in petroleum refineries. Includes crude oil burned for electricity generation.
2.1.9. Primary Product Receipts
Includes quantities of indigenous or imported crude oil (including condensate) and indigenous NGL (2) used directly without being processed in a petroleum refinery, and quantities of backflows from the petrochemical industry which, although not primary fuel, are used directly.
2.1.10. Gross Refinery Output
Production of finished products at a refinery or blending plant. Excludes refinery losses, but includes refinery fuel.
2.1.11. Recycled Products
Finished products that pass through the marketing network a second time, after having been delivered to final consumers (e.g. used lubricants which are reprocessed). These quantities should be distinguished from petrochemical backflows.
2.1.12. Backflows
Finished or semi-finished products which are returned from final consumers to refineries for processing, blending or sale. They are usually by-products of petrochemical manufacturing.
2.1.13. Interproduct Transfers
Quantities reclassified either because their specification has changed or because they are blended into another product. A negative entry for one product is compensated by a positive entry (or several entries) for one or several products and vice versa; the total net effect should be zero.
2.1.14. Products Transferred
Imported petroleum products which are reclassified as feedstocks for further processing in the refinery, without delivery to final consumers.
2.1.15. Statistical Differences
Calculated value, defined as difference between calculation from the supply perspective (top-down approach) and the calculation from the consumption perspective (bottom-up approach). Any major statistical differences should be explained.
2.2. Transformation sector
In the transformation sector, only quantities of fuels that were transformed into other fuels shall be reported. Quantities of fuels used for heating, operation of equipment and as general support for transformation should be declared in the energy sector.
2.2.1. Main Activity Producer Electricity ONLY
Quantities of fuels used by main activity producers to produce electricity in electricity-only units/plants.
2.2.2. Main Activity Producer Combined Heat and Power (CHP) Units
Quantities of fuels used by main activity producers to produce electricity and/or heat in CHP units.
2.2.3. Main Activity Producer Heat ONLY
Quantities of fuels used by main activity producers to produce heat in heat-only units/plants.
2.2.4. Autoproducer Electricity ONLY
Quantities of fuels used by autoproducers to produce electricity in electricity-only units/plants.
2.2.5. Autoproducer Combined Heat and Power (CHP) Units
All quantities of fuels used by autoproducers to produce electricity and the proportional part of fuels used to produce heat sold in CHP units. The proportional part of fuels used to produce heat that was not sold (auto-consumed heat) is to be reported in the relevant sector of final energy consumption based on NACE classification. Heat not sold but delivered to other entities under non-financial agreements or to entities with different ownership shall be reported based on the same principle as heat sold.
2.2.6. Autoproducer Heat ONLY
The proportional part of fuels used to produce heat sold in heat-only units/plants by autoproducers. The proportional part of fuels used to produce heat that was not sold (auto-consumed heat) is to be reported in the relevant sector of final energy consumption based on NACE classification. Heat not sold but delivered to other entities under non-financial agreements or to entities with different ownership shall be reported based on the same principle as heat sold.
2.2.7. Patent Fuel Plants
Quantities of fuels used in patent fuel plants to produce patent fuel.
2.2.8. Coke Ovens
Quantities of fuels used in coke ovens to produce coke oven coke and coke oven gas.
2.2.9. BKB/PB plants
Quantities of fuels used to produce brown coal briquettes (BKB) in BKB plants and quantities of fuels used in peat briquette plants to produce peat briquettes (PB).
2.2.10. Gas Works
Quantities of fuels used to produce gas work gas in gas works and in coal gasification plants.
2.2.11. Blast furnace
Quantities of fuels entering the blast furnace vessel, whether through the top along with the iron ore, or through the tuyeres in the bottom along with the heated blast air.
2.2.12. Coal Liquefaction
Quantities of fuel used to produce synthetic oil.
2.2.13. Gas-to-liquid plants
Quantities of gaseous fuels converted to liquid fuels.
2.2.14. Charcoal production plant
Quantities of solid biofuels converted to charcoal.
2.2.15. Petroleum refineries
Quantities of fuels used to produce petroleum products.
2.2.16. Natural gas blending plants (for blended natural gas)
Quantities of gases blended with natural gas into the gas grid (gas network).
2.2.17. For Blending with motor gasoline/diesel/kerosene:
Quantities of liquid biofuels blended with their fossil counterparts.
2.2.18. Not Elsewhere Specified
Quantities of fuels used for transformation activities not included elsewhere. If used, what is included under this heading should be explained in the report.
2.3. Energy sector
Quantities consumed by the energy industry to support extraction (mining, oil and gas production) or plant operations related to transformation activities. This corresponds to NACE Rev. 2 Divisions 05, 06, 19 and 35, NACE Rev. 2 Group 09.1 and NACE Rev. 2 classes 07.21 and 08.92.
Excludes quantities of fuels transformed into another energy form (which should be reported under the transformation sector) or used in support of the operation of oil, gas and coal slurry pipelines (which should be reported in the transport sector).
Includes the manufacture of chemical materials for atomic fission and fusion and the products of these processes.
2.3.1. Own use of Electricity, CHP and Heat Plants
Quantities of fuels consumed as energy for support operations at plants with electricity-only, heat-only and CHP units.
2.3.2. Coal Mines
Quantities of fuels consumed as energy to support the extraction and preparation of coal within the coal mining industry. Coal burned in pithead power stations should be reported in the transformation sector.
2.3.3. Patent fuel plants
Quantities of fuels consumed as energy for support operations at patent fuel plants.
2.3.4. Coke Ovens
Quantities of fuels consumed as energy for support operations in coke ovens (coking plants).
2.3.5. BKB/PB plants
Quantities of fuels used as energy for support operations in BKP/PB plants (briquetting plants).
2.3.6. Gas Works/gasification works
Quantities of fuels consumed as energy for support operations at gas works and coal gasification plants.
2.3.7. Blast Furnaces
Quantities of fuels consumed as energy for support operations at blast furnaces.
2.3.8. Coal Liquefaction
Quantities of fuels consumed as energy for support operations at coal liquefaction plants.
2.3.9. Liquefaction (LNG)/regasification
Quantities of fuels consumed as energy for support operations in natural gas liquefaction and regasification plants.
2.3.10. Gasification plants (biogas)
Quantities of fuels consumed as energy for support operations in biogas gasification plants.
2.3.11. Gas-to-liquid (GTL) plants
Quantities of fuels consumed as energy for support operations in gas-to-liquid conversion plants.
2.3.12. Charcoal production plants
Quantities of fuels consumed as energy for support operations in charcoal production plants.
2.3.13. Petroleum Refineries
Quantities of fuels consumed as energy for support operations at petroleum refineries.
2.3.14. Oil and Gas extraction
Quantities of fuels consumed in oil and natural gas extraction facilities. Excludes pipeline losses (to be reported as distribution losses) and energy quantities used to operate pipelines (to be reported in the transport sector).
2.3.15. Not elsewhere specified — Energy
Quantities of fuels related to energy activities not included elsewhere. If used, what is included under this heading should be explained in the report.
2.4. Distribution losses
Quantities of fuel losses which occur due to transport and distribution.
2.5. Final non-energy consumption
Quantities of fossil fuels used for non-energy purposes — fuels not combusted.
2.6. Final energy consumption (end-use specifications)
2.6.1. Industry Sector
This refers to fuel quantities consumed by the industrial undertaking in support of its primary activities.
For heat-only or CHP units, only quantities of fuels consumed for the production of heat used by the entity itself (heat auto-consumed) are to be reported. Quantities of fuels consumed for the production of heat sold and for the production of electricity should be reported under the appropriate transformation sector.
2.6.1.1. Mining and Quarrying: NACE Rev. 2 Divisions 07 (excluding 07.21) and 08 (excluding 08.92); NACE Rev. 2 Group 09.9.
2.6.1.1.1. Mining of metal ores [NACE Rev. 2 Division 07; excludes NACE Rev. 2 Class 07.21 Mining of uranium and thorium ores]
2.6.1.1.2. Other mining and quarrying [NACE Rev. 2 Div. 08; excludes NACE Rev. 2 Class 08.92 Extraction of peat]
2.6.1.1.3. Mining support service activities [NACE Rev. 2 Div. 09; excludes NACE Rev. 2 Group 09.1 Support activities for petroleum and natural gas extraction]
2.6.1.2. Food, Beverages and Tobacco: NACE Rev. 2 Divisions 10, 11 and 12.
2.6.1.2.1. Manufacture of food products [NACE Rev. 2 Div. 10]
2.6.1.2.2. Manufacture of beverages [NACE Rev. 2 Div. 11]
2.6.1.2.3. Manufacture of tobacco products [NACE Rev. 2 Div. 12]
2.6.1.3. Textile and Leather [NACE Rev. 2 Div. 13, 14 and 15; includes the Manufacture of textiles, the Manufacture of wearing apparel and the Manufacture of leather and related products]
2.6.1.4. Wood and Wood Products — Manufacture of wood and of products of wood and cork, except furniture; manufacture of articles of straw and plaiting materials [NACE Rev. 2 Div. 16]
2.6.1.5. Pulp, Paper and Printing: NACE Rev. 2 Divisions 17 and 18.
2.6.1.5.1. Manufacture of paper and paper products [NACE Rev. 2 Div. 17]
2.6.1.5.1.1. Manufacture of pulp [NACE Rev. 2 Class 17.11]
2.6.1.5.1.2. Other paper and paper products [NACE Rev. 2 Class 17.12 and NACE Rev. 2 Group 17.2]
2.6.1.5.2. Printing and reproduction of recorded media [NACE Rev. 2 Div. 18]
2.6.1.6. Chemical and Petrochemical: NACE Rev. 2 Divisions 20 and 21.
2.6.1.6.1. Manufacture of chemicals and chemical products [NACE Rev. 2 Div. 20]
2.6.1.6.2. Manufacture of basic pharmaceutical products and pharmaceutical preparations [NACE Rev. 2 Div. 21]
2.6.1.7. Non-Metallic Minerals [NACE Rev. 2 Div. 23]
2.6.1.7.1. Manufacture of glass and glass products [NACE Rev. 2 Group 23.1]
2.6.1.7.2. Manufacture of cement, lime and plaster (incl. Clinker) [NACE Rev. 2 Group 23.5]
2.6.1.7.3. Other non-metallic mineral products [NACE Rev. 2 Groups 23.2, 23.3, 23.4, 23.6, 23.7 and 23.9]
2.6.1.8. Iron and Steel [Manufacture of basic metals A: NACE Rev. 2 Groups 24.1, 24.2 and 24.3 and Classes 24.51 and 24.52]
2.6.1.9. Non-ferrous metals industries [Manufacture of basic metals B: NACE Rev. 2 Group 24.4 and Classes 24.53 and 24.54]
2.6.1.9.1. Aluminium production [NACE Rev. 2 Class 24.42]
2.6.1.9.2. Other non-ferrous metals industries [NACE Rev. 2 Group 24.4 — excl. NACE Rev. 2 Class 24.42; NACE Rev. 2 Classes 24.53 and 24.54]
2.6.1.10. Machinery: NACE Rev. 2 Divisions 25, 26, 27 and 28.
2.6.1.10.1. Manufacture of fabricated metal products, except machinery and equipment [NACE Rev. 2 Div. 25]
2.6.1.10.2. Manufacture of computer, electronic and optical products [NACE Rev. 2 Div. 26]
2.6.1.10.3. Manufacture of electrical equipment [NACE Rev. 2 Div. 27]
2.6.1.10.4. Manufacture of machinery and equipment n.e.c. [NACE Rev. 2 Div. 28]
2.6.1.11. Transport Equipment: Industries related to the equipment used for transport [NACE Div. 29 and 30; includes the Manufacture of motor vehicles, trailers and semi-trailers and the Manufacture of other transport equipment]
2.6.1.12. Not Elsewhere Specified — Industry: NACE Divisions 22, 31 and 32
2.6.1.12.1. Manufacture of rubber and plastic products [NACE Div. 22]
2.6.1.12.2. Manufacture of furniture [NACE Rev. 2 Div. 31]
2.6.1.12.3. Other manufacturing [NACE Rev. 2 Div. 32]
2.6.1.13. Construction [NACE Rev. 2 Div. 41, 42 and 43]
2.6.2. Transport Sector
Energy used in all transport activities irrespective of the NACE category (economic sector) in which the activity occurs. Fuels used for heating and lighting at railway stations, bus stations, shipping piers and airports should be reported under ‘Commercial and Public Services’ and not in the transport sector.
2.6.2.1. Rail
Quantities of fuels used by rail traffic, including industrial railways and rail transport as part of urban or suburban transport systems (for example trains, trams, metros).
2.6.2.2. Domestic navigation
Quantities of fuels delivered to vessels of all flags not engaged in international navigation (see international marine bunkers). The domestic/international split should be determined based on the port of departure and port of arrival and not by the flag or nationality of the ship.
2.6.2.3. Road
Quantities of fuels used in road vehicles. Includes fuel used by agricultural vehicles on highways and lubricants for use in road vehicles.
Excludes energy used in stationary engines (see ‘Other sector’), for non-highway use in tractors (see ‘Agriculture’), military use in road vehicles (see ‘Other sector — Not elsewhere specified’), bitumen used in road surfacing and energy used in engines at construction sites (see ‘Industry’ sub-sector ‘Construction’).
2.6.2.4. Pipeline Transport
Quantities of fuels used as energy in the support and operation of pipelines transporting gases, liquids, slurries and other commodities. Includes energy used for pump stations and maintenance of the pipeline. Excludes energy used for the pipeline distribution of natural or manufactured gas, hot water or steam from the distributor to final users (to be reported in the energy sector), energy used for the final distribution of water to households, industrial, commercial and other users (to be included in Commercial and Public Services) and losses occurring during the transport between distributor and final users (to be reported as distribution losses).
2.6.2.5. International Aviation
Quantities of fuels delivered to aircrafts for international aviation. The domestic/international split should be determined based on departure and landing locations and not by the nationality of the airline. Excludes fuels used by airlines for their road vehicles (to be reported in ‘Not elsewhere specified — Transport’) and military use of aviation fuels (to be reported in ‘Not Elsewhere Specified — Other’).
2.6.2.6. Domestic Aviation
Quantities of fuels delivered to aircraft for domestic aviation. Includes fuel used for purposes other than flying, e.g. the bench testing of engines. The domestic/international split should be determined based on departure and landing locations and not by the nationality of the airline. This includes journeys of considerable length between two airports in a country with overseas territories. Excludes fuels used by airlines for their road vehicles (to be reported in ‘Not Elsewhere Specified — Transport’) and military use of aviation fuels (to be reported in ‘Not Elsewhere Specified — Other’).
2.6.2.7. Not Elsewhere Specified — Transport
Quantities of fuels used for transport activities not included elsewhere. Includes fuels used by airlines for their road vehicles and fuels used in ports for ships’ unloaders, various types of cranes. If used, what is included under this heading should be explained in the report.
2.6.3. Other Sectors
This category covers quantities of fuels used in sectors not specifically mentioned or not belonging to transformation, energy, industry or transport.
2.6.3.1. Commercial and Public Services
Quantities of fuels consumed by business and offices in the public and private sectors. NACE Rev. 2 Divisions 33, 36, 37, 38, 39, 45, 46, 47, 52, 53, 55, 56, 58, 59, 60, 61, 62, 63, 64, 65, 66, 68, 69, 70, 71, 72, 73, 74, 75, 77, 78, 79, 80, 81, 82, 84 (excluding Class 84.22), 85, 86, 87, 88, 90, 91, 92, 93, 94, 95, 96 and 99. Fuels used for heating and lighting at railway, bus stations, shipping piers and airports should be reported in this category, including fuels used for all non-transport activities of NACE Rev. 2 Division 49, 50 and 51.
2.6.3.2. Households
Quantities of fuels consumed by all households including ‘households with employed persons’. NACE Rev. 2 Divisions 97 and 98.
The following specific definitions apply for the households sector:
A household is a person living alone or a group of people living together in the same private dwelling and sharing expenditure, including the joint provision of the essentials of living. The households sector, also known as the residential or domestic sector, is therefore a collective pool of all households in a country.
Collective residences, either permanent (e.g. prisons) or temporary (e.g. hospitals), should be excluded as they are covered under consumption in the service sector. Energy used in transport activities should be reported in the transport sector and not in the households sector.
Energy consumption associated with significant economic activities carried out by households should also be excluded from total household energy consumption. Such activities include agricultural economic activities on small farms and other economic activities carried out in a household’s residence and should be reported in the appropriate sector of final consumption.
2.6.3.2.1. Space heating
This energy service refers to the use of energy to provide heat in an interior area of a dwelling.
2.6.3.2.2. Space cooling:
This energy service refers to the use of energy for cooling in a dwelling, by a refrigeration system and/or unit.
Fans, blowers and other appliances not connected to a refrigeration unit are excluded from this section, but should be covered in the ‘lighting and electrical appliances’ section.
2.6.3.2.3. Water heating:
This energy service refers to the use of energy to heat water for hot running water, bathing, cleaning and other non-cooking applications.
Swimming pool heating is excluded, but should be covered in the ‘other end uses’ section.
2.6.3.2.4. Cooking:
This energy service refers to the use of energy to prepare meals.
Appliances for auxiliary cooking (microwave ovens, kettles, coffee makers, etc.) are excluded and should be covered in the ‘lighting and electrical appliances’ section.
2.6.3.2.5. Lighting and electrical appliances (electricity only):
Use of electricity for lighting and any other electrical appliances in a dwelling not considered within other end uses.
2.6.3.2.6. Other end uses:
Any other energy consumption in households, such as use of energy for outdoor and any other activities not included into the five energy end-uses mentioned above (e.g. lawn mowers, swimming pool heating, outdoor heaters, outdoor barbecues, saunas etc.).
2.6.3.3. Agriculture/Forestry
Quantities of fuels consumed by users classified as agriculture, hunting and forestry; NACE Rev. 2 Divisions 01 and 02.
2.6.3.4. Fishing
Quantities of fuels delivered for inland, coastal and deep-sea fishing. Fishing should cover fuels delivered to ships of all flags that have refuelled in the country (including international fishing) and energy used in the fishing industry. NACE Rev. 2 Division 03.
2.6.3.5. Not Elsewhere Specified — Other
Quantities of fuels used for activities not included elsewhere (such as NACE Rev. 2 Class 84.22). This category includes military fuel use for all mobile and stationary consumption (e.g. ships, aircraft, road and energy used in living quarters), regardless of whether the fuel delivered is for the military of that country or for the military of another country. If used, what is included under this heading should be explained in the report.
3. PRODUCTS
3.1. Coal (solid fossil fuels and manufactured gases)
3.1.1. Hard coal
Hard coal is a product aggregate equal to the sum of anthracite, coking coal and other bituminous coal.
3.1.2. Anthracite
High rank coal used for industrial and household applications. It generally has less than 10 % volatile matter and a high carbon content (about 90 % fixed carbon). Its gross calorific value is greater than 24 000 kJ/kg on an ash-free but moist basis.
3.1.3. Coking coal
Bituminous coal with a quality that allows the production of a coke (coke oven coke) suitable to support a blast furnace charge. Its gross calorific value is greater than 24 000 kJ/kg on an ash-free but moist basis.
3.1.4. Other bituminous coal
Coal used for steam raising purposes and includes all bituminous coal that is not included under coking coal nor anthracite. It is characterised by higher volatile matter than anthracite (more than 10 %) and lower carbon content (less than 90 % fixed carbon). Its gross calorific value is greater than 24 000 kJ/kg on an ash-free but moist basis.
3.1.5. Brown coal
Brown coal is a product aggregate equal to the sum of sub-bituminous coal and lignite.
3.1.6. Sub-bituminous coal
Refers to non-agglomerating coal with a gross calorific value between 20 000 kJ/kg and 24 000 kJ/kg containing more than 31 % volatile matter on a dry mineral matter free basis.
3.1.7. Lignite
Non-agglomerating coal with a gross calorific value less than 20 000 kJ/kg and greater than 31 % volatile matter on a dry mineral matter free basis.
3.1.8. Patent fuel
A composition fuel manufactured from hard coal fines with the addition of a binding agent. The amount of patent fuel produced may, therefore, be slightly higher than the actual amount of coal consumed in the transformation process.
3.1.9. Coke oven coke
The solid product obtained from the carbonisation of coal, principally coking coal, at high temperature; it is low in moisture and volatile matter. Coke oven coke is used mainly in the iron and steel industry, acting as an energy source and chemical agent.
Coke breeze and foundry coke are to be reported in this category.
Semi-coke (a solid product obtained from the carbonisation of coal at a low temperature) should be included in this category. Semi-coke is used as a heating fuel or by the transformation plant itself.
This heading also includes coke, coke breeze and semi-coke made from lignite.
3.1.10. Gas coke
By-product of hard coal used for production of town gas in gas works. Gas coke is used for heating purposes.
3.1.11. Coal tar
A result of the destructive distillation of bituminous coal. Coal tar is the liquid by-product of the distillation of coal to make coke in the coke oven process or is produced from brown coal (‘low-temperature tar’).
3.1.12. BKB (Brown Coal Briquettes)
BKB is a composition fuel manufactured from lignite or sub-bituminous coal, produced by briquetting under high pressure without the addition of a binding agent, including dried lignite fines and dust.
3.1.13. Manufactured gases
Manufactured gases is a product aggregate equal to the sum of gas works gas, coke oven gas, blast furnace gas and other recovered gases.
3.1.14. Gas works gas
Covers all types of gases produced in public utility or private plants whose main purpose is the manufacture, transport and distribution of gas. It includes gas produced by carbonisation (including gas produced by coke ovens and transferred to gas works gas), by total gasification with or without enrichment with oil products (LPG, residual fuel oil, etc.), and by reforming and simple mixing of gases and/or air, including blending with natural gas which will be distributed and consumed through the natural gas grid. The amount of gas resulting from transfers of other coal gases to gas works gas should be reported as the production of the gas works gas.
3.1.15. Coke Oven Gas
Coke oven gas is a gas obtained as a by-product of the manufacture of coke oven coke for the production of iron and steel.
3.1.16. Blast furnace gas
Blast furnace gas is produced during the combustion of coke in blast furnaces in the iron and steel industry. It is recovered and used as a fuel partly within the plant and partly in other steel industry processes or in power stations equipped to burn it.
3.1.17. Other recovered gases
By-product of the production of steel in an oxygen furnace, recovered on leaving the furnace. The gases are also known as converter gas, LD gas or BOS gas. The quantity of recuperated fuel should be reported on a gross calorific value basis. Also covers non-specified manufactured gases not mentioned above, such as combustible gases of solid carbonaceous origin recovered from manufacturing and chemical processes not defined elsewhere.
3.1.18. Peat
Peat is a combustible soft, porous or compressed, sedimentary deposit of plant origin with high water content (up to 90 % in the raw state), easily cut, of light to dark brown colour. Peat includes sod peat and milled peat. Peat used for non-energy purposes is not included.
3.1.19. Peat Products
Products such as peat briquettes derived directly or indirectly from sod peat and milled peat.
3.1.20. Oil shale and oil sands
Oil shale and oil sands are sedimentary rock that contains organic matter in the form of kerogen. Kerogen is a waxy hydrocarbon-rich material regarded as a precursor of petroleum. Oil shale may be burned directly or processed by heating to extract shale oil. Shale oil and other products derived from liquefaction should be reported as other hydrocarbons within petroleum products.
3.2. Natural gas
3.2.1. Natural gas
Natural gas comprises gases occurring in underground deposits, whether liquefied or gaseous, consisting mainly of methane, independent from the extraction method (conventional and non-conventional). It includes both ‘non-associated’ gas originating from fields producing hydrocarbons only in gaseous form, and ‘associated’ gas produced in association with crude oil, as well as methane recovered from coal mines (colliery gas) or from coal seams (coal seam gas). Natural gas does not include biogas or manufactured gases. Transfers of these products to the natural gas network are to be reported separately from natural gas. Natural gas includes liquefied natural gas (LNG) and compressed natural gas (CNG).
3.3. Electricty and heat
3.3.1. Electricity
Electricity refers to the transfer of energy through the physical phenomenon involving electric charges and their effects when at rest and in motion. All electricity that is used, produced and consumed is to be reported, including off-grid and self-consumed.
3.3.2. Heat (Derived heat)
Heat refers to the energy obtained from the translational, rotational and vibrational motion of the constituents of matter as well as changes in its physical state. All heat produced, except for heat produced by autoproducers for their own use and not sold, is to be reported; all other forms of heat are reported as use of products from which the heat was produced.
3.4. Oil (Crude oil and petroleum products)
3.4.1. Crude Oil
Crude oil is a mineral oil of natural origin comprising a mixture of hydrocarbons and associated impurities, such as sulphur. It exists in the liquid state under normal surface temperature and pressure and its physical characteristics (density, viscosity, etc.) are highly variable. This category includes field or lease condensate recovered from associated and non-associated gas where it is commingled with the commercial crude oil stream. Report quantities independent from the extraction method (conventional and non-conventional). Crude oil excludes NGL.
3.4.2. Natural gas liquids (NGL)
NGL are liquid or liquefied hydrocarbons recovered from natural gas in separation facilities or gas processing plants. NGL include ethane, propane, butane (normal and iso-), (iso) pentane and pentanes plus (sometimes referred to as natural gasoline or plant condensate).
3.4.3. Refinery Feedstocks
A refinery feedstock is a processed oil destined for further processing (e.g. straight run fuel oil or vacuum gas oil) excluding blending. With further processing, it will be transformed into one or more components and/or finished products. This definition also covers returns from the petrochemical industry to the refining industry (e.g. pyrolysis gasoline, C4 fractions, gasoil and fuel oil fractions).
3.4.4. Additives/Oxygenates
Additives are non-hydrocarbon compounds added to or blended with a petroleum products to modify their properties (octane, cetane, cold properties, etc.). Additives include oxygenates (such as alcohols (methanol, ethanol), ethers (methyl tertiary butyl ether(MTBE), ethyl tertiary butyl ether (ETBE), tertiary amyl methyl ether (TAME), etc.), esters (such as rapeseed oil or dimethylester, etc.), chemical compounds (such as tetramethyl lead (TML), tetraethyl lead (TEL) and detergents).Quantities of additives/oxygenates (alcohols, ethers, esters and other chemical compounds) reported in this category should relate to the quantities blended with fuels or for fuel use. This category includes biofuels that are blended with liquid fossil fuels.
3.4.5. Biofuels in Additives/Oxygenates
Quantities of liquid biofuels reported in this category relate to blended liquid biofuels and refer only to the liquid biofuel portion and not to the total volume of liquids into which the liquid biofuels are blended. Excludes all liquid biofuels that have not been blended.
3.4.6. Other Hydrocarbons
Synthetic crude oil from tar sands, shale oil, etc., liquids from coal liquefaction, output of liquids from natural gas conversion into gasoline, hydrogen and emulsified oils (e.g. orimulsion); excludes oil shale; includes the shale oil (secondary product).
3.4.7. Petroleum products
Petroleum products are a product aggregate equal to the sum of refinery gas, ethane, liquefied petroleum gases, naphtha, motor gasoline, aviation gasoline, gasoline type jet fuel, kerosene type jet fuel, other kerosene, gas/diesel oil, fuel oil, white spirit ad SPB, lubricants, bitumen, paraffin waxes, petroleum coke and other products.
3.4.8. Refinery Gas
Refinery gas includes a mixture of non-condensed gases mainly consisting of hydrogen, methane, ethane and olefins obtained during the distillation of crude oil or treatment of oil products (e.g. cracking) in refineries. This also includes gases which are returned from the petrochemical industry.
3.4.9. Ethane
A naturally gaseous straight-chain hydrocarbon, (C2H6) extracted from natural gas and refinery gas streams.
3.4.10. Liquefied Petroleum Gases (LPG)
LPG are light paraffinic hydrocarbons derived from refinery processes, crude oil stabilisation and natural gas processing plants. They consist mainly of propane (C3H8) and butane (C4Hl0) or a combination of the two. They could also include propylene, butylene, isopropylene and isobutylene. LPG are normally liquefied under pressure for transportation and storage.
3.4.11. Naphtha
Naphtha is a feedstock destined for either the petrochemical industry (e.g. ethylene manufacture or aromatics production) or for gasoline production by reforming or isomerisation within the refinery. Naphtha comprises material in the 30 °C and 210 °C distillation range or part of this range.
3.4.12. Motor Gasoline
Motor gasoline consists of a mixture of light hydrocarbons distilling at between 35 °C and 215 °C. It is used as a fuel for land-based spark ignition engines. Motor gasoline may include additives, oxygenates and octane enhancers, including lead compounds. Includes motor gasoline blending components (excluding additives/oxygenates), e.g. alkylates, isomerate, reformate, cracked gasoline destined for use as finished motor gasoline. Motor gasoline is a product aggregate equal to the sum of blended biogasoline (biogasoline in motor gasoline) and non-biogasoline.
3.4.12.1. Blended biogasoline (biogasoline in motor gasoline)
Biogasoline that was blended in motor gasoline.
3.4.12.2. Non-biogasoline
The remaining part of motor gasoline — motor gasoline excluding blended biogasoline (this is mostly motor gasoline of fossil origin).
3.4.13. Aviation gasoline
Motor spirit prepared especially for aviation piston engines, with an octane number suited to the engine, a freezing point of — 60 °C and a distillation range usually within the limits of 30 °C and 180 °C.
3.4.14. Gasoline type jet fuel (Naphtha type jet fuel or JP4)
This includes all light hydrocarbon oils for use in aviation turbine power units, distilling at between 100 °C and 250 °C. They are obtained by blending kerosenes and gasoline or naphthas in such a way that the aromatic content does not exceed 25 % in volume, and the vapour pressure is between 13.7 kPa and 20.6 kPa.
3.4.15. Kerosene type jet fuel
Distillate used for aviation turbine power units. It has the same distillation characteristics at between 150 °C and 300 °C (generally not above 250 °C) and flash point as kerosene. In addition, it has particular specifications (such as freezing point) which are established by the International Air Transport Association. Includes kerosene blending components. Kerosene type jet fuel is a product aggregate equal to the sum of blended bio jet kerosene (bio jet kerosene in kerosene type jet fuel) and non-bio jet kerosene.
3.4.15.1. Blended bio jet kerosene (bio jet kerosene in kerosene type jet fuel)
Bio jet kerosene that was blended in kerosene type jet fuel.
3.4.15.2. Non-bio jet kerosene
The remaining part of kerosene type jet fuel — kerosene type jet fuel excluding blended bio jet kerosene (this is mostly kerosene type jet fuel of fossil origin).
3.4.16. Other kerosene
Refined petroleum distillate used in sectors other than aircraft transport. It distils at between 150 °C and 300 °C.
3.4.17. Gas/Diesel oil (Distillate fuel oil)
Gas/diesel oil is primarily a medium distillate distilling at between 180 °C and 380 °C. Includes blending components. Several grades are available depending on uses. Gas/diesel oil includes on-road diesel oil for diesel compression ignition engines of cars and trucks. Gas/diesel oil includes light heating oil for industrial and commercial uses, marine diesel and diesel used in rail traffic, other gas oil including heavy gas oils which distil at between 380 °C and 540 °C and which are used as petrochemical feedstocks. Gas/diesel oil is a product aggregate equal to the sum of blended biodiesels (biodiesels in gas/diesel oil) and non-biodiesels.
3.4.17.1. Blended biodiesels (biodiesels in gas/diesel oil)
Biodiesels that were blended in gas/diesel oil.
3.4.17.2. Non-biodiesels
The remaining part of gas/diesel oil — gas/diesel oil excluding blended biodiesels (this is mostly gas/diesel oil of fossil origin).
3.4.18. Fuel oil (heavy fuel oil)
All residual (heavy) fuel oils (including those obtained by blending). Kinematic viscosity is above 10 cSt at 80 °C. The flash point is always above 50 °C and density is always more than 0,90 kg/l. Fuel oil is a product aggregate equal to the sum of low sulphur fuel oil and high sulphur fuel oil.
3.4.18.1. Low sulphur fuel oil (LSFO)
Fuel oil with sulphur content lower than 1 %.
3.4.18.2. High sulphur fuel oil (HSFO)
Fuel oil with sulphur content of 1 % or higher.
3.4.19. White spirit and SBP
White spirit and SBP are defined as refined distillate intermediates with a distillation in the naphtha/kerosene range. They include industrial spirit (also called SBP; light oils distilling at between 30 °C and 200 °C in 7 or 8 grades of industrial spirit, depending on the position of the cut in the distillation range — the grades are defined according to the temperature difference between the 5 % volume and 90 % volume distillation points, which is not more than 60 °C) and white spirits (industrial spirit with a flash point above 30 °C and the distillation range between 135 °C and 200 °C).
3.4.20. Lubricants
Hydrocarbons produced from distillate by product. They are mainly used to reduce friction between bearing surfaces. Includes all finished grades of lubricating oil, from spindle oil to cylinder oil, and those used in greases, motor oils and all grades of lubricating oil base stocks.
3.4.21. Bitumen
Solid, semi-solid or viscous hydrocarbon with a colloidal structure, being brown to black in colour, obtained as a residue in the distillation of crude oil, by vacuum distillation of oil residues from atmospheric distillation. Bitumen is often referred to as asphalt and is primarily used for the construction of roads and for roofing material. Includes fluidised and cut back bitumen.
3.4.22. Paraffin waxes
These are saturated aliphatic hydrocarbons. They are residues extracted when dewaxing lubricant oils. They have a crystalline structure which is more-or-less fine according to the grade. Their main characteristics are as follows: they are colourless, odourless and translucent, with a melting point above 45 °C.
3.4.23. Petroleum coke
Black solid by-product, obtained mainly by cracking and carbonising petroleum derived feedstock, vacuum bottoms, tar and pitches in processes such as delayed coking or fluid coking. It consists mainly of carbon (90 to 95 %) and has a low ash content. It is used as a feedstock in coke ovens for the steel industry, for heating purposes, for electrode manufacture and for the production of chemicals. The two most important qualities are ‘green coke’ and ‘calcinated coke’. Includes ‘catalyst coke’ deposited on the catalyst during refining processes; this coke is not recoverable and is usually burned as refinery fuel.
3.4.24. Other products
All other products not specifically mentioned above, for example: tar and sulphur. Includes aromatics (e.g. BTX or benzene, toluene and xylene) and olefins (e.g. propylene) produced within refineries.
3.5. Renewables and waste
3.5.1. Hydro
Potential and kinetic energy of water converted into electricity in hydroelectric plants. Hydro is a product aggregate equal to the sum of pure hydro plants, mixed hydro plants and pure pumped storage plants.
3.5.1.1. Pure hydro plants
Hydro plants that only use direct natural water inflow and have no capacity for hydro pump storage (pumping water uphill).
3.5.1.2. Mixed hydro plants
Hydro plants with natural water inflow into an upper reservoir where part or all equipment can be used for pumping water uphill; the electricity generated is a consequence of both natural water inflow and water previously pumped uphill.
3.5.1.3. Pure pumped storage plants
Hydro plants with no natural water inflow into the upper reservoir; the vast majority of water that generates electricity was previously pumped uphill; excluding rainfall and snowfall.
3.5.2. Geothermal
Energy available as heat emitted from within the earth’s crust, usually in the form of hot water or steam; excluding ambient heat captured by ground source heat pumps. Geothermal energy production is the difference between the enthalpy of the fluid produced in the production borehole and that of the fluid eventually disposed of.
3.5.3. Solar
Solar is a product aggregate equal to the sum of solar photovoltaic and solar thermal.
3.5.3.1. Solar photovoltaic
Sunlight converted into electricity by the use of solar cells which exposed to light will generate electricity. All electricity produced is to be reported (including small-scale production and off-grid installations).
3.5.3.2. Solar thermal
Heat from solar radiation (sunlight) exploited for useful energy purposes. This includes, for example, solar thermal-electric plants and active systems for the production of sanitary hot water or for space heating of buildings. This energy production is the heat available to the heat transfer medium, i.e. the incident solar energy less the optical and collectors losses. Solar energy captured by passive systems for heating, cooling and lighting of buildings is not to be included; only solar energy in relation to the active systems is to be included.
3.5.4. Tide, wave, ocean
Mechanical energy derived from tidal movement, wave motion or ocean current and exploited for electricity generation.
3.5.5. Wind
Kinetic energy of wind exploited for electricity generation in wind turbines. Wind is a product aggregate equal to the sum of on-shore wind and off-shore wind.
3.5.5.1. On-shore wind
Production of electricity by wind in locations on-shore (inland, including lakes and other bodies of water located inland).
3.5.5.2. Off-shore wind
Production of electricity in locations off-shore (e.g. sea, ocean and artificial islands). For off-shore wind production outside of the territorial waters of the concerned territory, all installations located in a country’s exclusive economic zone should be taken into account.
3.5.6. Industrial waste (non-renewable portion)
Report waste of industrial non-renewable origin combusted directly at specific installations for meaningful energy purposes. The quantity of fuel used should be reported on a net calorific value basis. Waste incinerated without any energy recovery is excluded. The renewable portion of industrial waste should be reported in the biofuels category that best describes it.
3.5.7. Municipal waste
Wastes produced by households, hospitals and the tertiary sector (in general all waste that resembles household waste), combusted directly at specific installations for meaningful energy purposes. The quantity of fuel used should be reported on a net calorific value basis. Waste incinerated without any energy recovery is excluded. Municipal waste is a product aggregate equal to the sum of renewable municipal waste and non-renewable municipal waste.
3.5.7.1. Renewable municipal waste
The portion of municipal waste which is of biological origin.
3.5.7.2. Non-renewable municipal waste
The portion of municipal waste which is of non-biological origin.
3.5.8. Biofuels
Biofuels is a product aggregate equal to the sum of solid biofuels, biogas and liquid biofuels. Biofuels used for non-energy purposes are excluded from the scope of energy statistics (for example wood used for construction or as furniture, biolubricant for engine lubrication and biobitumen used for road surface).
3.5.8.1. Solid biofuels
Covers solid organic, non-fossil material of biological origin (also known as biomass) which may be used as fuel for heat production or electricity generation. Solid biofuels is a product aggregate equal to the sum of charcoal, fuelwood, wood residues and by-products, black liquor, bagasse, animal waste, other vegetal materials and residuals and renewable fraction of industrial waste.
3.5.8.1.1. Charcoal
Charcoal is a manufactured fuel from solid biofuels — the solid residue of the destructive distillation and pyrolysis of wood and other vegetal material.
3.5.8.1.2. Fuelwood, wood residues and by-products
Fuelwood or firewood (in log, brushwood, pellet or chip form) obtained from natural or managed forests or isolated trees. Included are wood residues used as fuel and in which the original composition of wood is retained; wood pellets are included. Charcoal and black liquor are excluded. The quantity of fuel used should be reported on a net calorific value basis.
3.5.8.1.2.1. Wood pellets
Wood pellets are a cylindrical product which has been agglomerated from wood residues by compression.
3.5.8.1.3. Black liquor
Energy from the alkaline-spent liquor obtained from the digesters during the production of sulphate or soda pulp required for paper manufacture. The quantity of fuel used should be reported on a net calorific value basis.
3.5.8.1.4. Bagasse
Fuel obtained from the fibre which remains after juice extraction in sugar cane processing. The quantity of fuel used should be reported on a net calorific value basis.
3.5.8.1.5. Animal waste
Energy from excreta of animals, meat and fish residues which when dry is used directly as a fuel. This excludes waste used in anaerobic fermentation plants. Fuel gases from these plants are included under biogases. The quantity of fuel used should be reported on a net calorific value basis.
3.5.8.1.6. Other vegetal materials and residuals
Biofuels not specified elsewhere and including straw, vegetable husks, ground nut shells, pruning brushwood, olive pomace and other wastes arising from the maintenance, cropping and processing of plants. The quantity of fuel used should be reported based on the net calorific value.
3.5.8.1.7. Renewable portion of industrial waste
Solid renewable portion of industrial waste combusted directly at specific installations for meaningful energy purposes (for example but not only, the portion of natural rubber in waste rubber tires or the portion of natural fibres in textile waste – from waste categories 07.3 and 07.6, respectively, as defined in Regulation (EC) No 2150/2002 on waste statistics). The quantity of fuel used should be reported on a net calorific value basis.
3.5.8.2. Biogas
A gas composed principally of methane and carbon dioxide produced by anaerobic digestion of biomass or by thermal processes from biomass, including biomass in waste. The quantity of fuel used should be reported on a net calorific value basis. Biogas is a product aggregate equal to the sum of landfill gas, sewage sludge gas, other biogases from anaerobic digestion and biogases from thermal processes.
3.5.8.2.1. Landfill gas
Biogas produced from the anaerobic digestion of landfill waste.
3.5.8.2.2. Sewage sludge gas
Biogas produced from the anaerobic fermentation of sewage sludge.
3.5.8.2.3. Other biogases from anaerobic digestion
Biogas produced from the anaerobic fermentation of animal slurries and of waste in abattoirs, breweries and other agro-food industries.
3.5.8.2.4. Biogases from thermal processes
Biogas produced from thermal processes (by gasification or pyrolysis) of biomass.
3.5.8.3. Liquid biofuels
This category includes all liquid fuels of natural origin (e.g. produced from biomass and/or the biodegradable fraction of waste) suitable to be blended with or to replace liquid fuels from fossil origin. The quantities of liquid biofuels reported in this category should include the quantities of pure biofuel that were not blended with fossil fuels. In the particular case of imports and exports of liquid biofuels, only trade of quantities that have not been blended with transport fuels (i.e. in their pure form) is relevant; trade of liquid biofuels blended into transport fuels should be reported within the oil category of products. Only liquid biofuels used for energy purposes — combusted directly or blended with fossil fuels — are to be reported. Liquid biofuels is a product aggregate equal to the sum of biogasoline, biodiesels, bio jet kerosene and other liquid biofuels.
3.5.8.3.1. Biogasoline
Liquid biofuels suitable to be blended with or to replace motor gasoline from fossil origin.
3.5.8.3.1.1. Bioethanol
Ethanol as part of biogasoline.
3.5.8.3.2. Biodiesels
Liquid biofuels suitable to be blended with or to replace gas/diesel oil from fossil origin.
3.5.8.3.3. Bio jet kerosene
Liquid biofuels suitable to be blended with or to replace jet kerosene from fossil origin.
3.5.8.3.4. Other liquid biofuels
Liquid biofuels not included in any of the previous categories.
3.5.9. Ambient heat
Heat energy at a useful temperature level, extracted (captured) by means of heat pumps that need electricity or other auxiliary energy to function. This heat energy can be stored in the ambient air, beneath the surface of solid earth or in surface water. Values shall be reported using the same methodology as the one used for reporting heat energy captured by heat pumps under Directive 2009/28/EC, but all heat pumps should be included regardless of their performance level.
ANNEX B
ANNUAL ENERGY STATISTICS
This Annex describes the scope, units, reported period, frequency, deadline and transmission modalities for the annual collection of energy statistics.
The following provisions apply to all data collections specified in this annex:
(a) |
Reported period: The reported period of declared data shall be a calendar year (1 January to 31 December), starting at reference year 2017. |
(b) |
Frequency: Data shall be declared on an annual basis. |
(c) |
Deadline for transmission of data: Data shall be sent in by 30 November of the year following the reported year, unless specified otherwise. |
(d) |
Transmission format: The transmission format shall conform to the relevant interchange standard specified by Eurostat. |
(e) |
Transmission method: Data shall be sent in or uploaded by electronic means to the single entry point for data at Eurostat. |
Annex A includes explanations of terms for which a specific explanation is not supplied in this Annex.
1. SOLID FOSSIL FUELS AND MANUFACTURED GASES
1.1. Applicable energy products
Unless otherwise specified, this data collection applies to all energy products listed in Annex A, Chapter 3.1. COAL (solid fossil fuels and manufactured gases).
1.2. List of aggregates
The following list of aggregates must be declared for all energy products listed in the previous paragraph unless otherwise specified.
1.2.1. Supply
1.2.1.1. Production
1.2.1.1.1. Underground production
Applicable only for anthracite, coking coal, other bituminous coal, subbituminous coal and lignite.
1.2.1.1.2. Surface production
Applicable only for anthracite, coking coal, other bituminous coal, subbituminous coal and lignite.
1.2.1.2. Receipts from other sources
This consists of two components:
— |
recovered slurries, middlings and other low-grade coal products, which cannot be classified according to type of coal, including coal recovered from waste piles and other waste receptacles, |
— |
receipts from other sources. |
1.2.1.3. Receipts from other sources: from oil products
Not applicable for anthracite, coking coal, other bituminous coal, subbituminous coal, lignite, peat, and oil shale and oil sands.
1.2.1.4. Receipts from other sources: from natural gas
Not applicable for anthracite, coking coal, other bituminous coal, subbituminous coal, lignite, peat, and oil shale and oil sands.
1.2.1.5. Receipts from other sources: from renewables
Not applicable for anthracite, coking coal, other bituminous coal, subbituminous coal, lignite, peat, oil shale and oil sands.
1.2.1.6. Imports
1.2.1.7. Exports
1.2.1.8. International Marine Bunkers
1.2.1.9. Stock changes
1.2.2. Transformation Sector
1.2.2.1. Main Activity Producer Electricity Only
1.2.2.2. Main Activity Producer Combined Heat and Power (CHP) Units
1.2.2.3. Main Activity Producer Heat Only
1.2.2.4. Autoproducer Electricity Only
1.2.2.5. Autoproducer Combined Heat and Power (CHP) Units
1.2.2.6. Autoproducer Heat Only
1.2.2.7. Patent Fuel Plants
1.2.2.8. Coke Ovens
1.2.2.9. BKB/PB Plants
1.2.2.10. Gas Works
1.2.2.11. Blast Furnaces
1.2.2.12. Coal Liquefaction
1.2.2.13. For Blended Natural Gas
1.2.2.14. Not Elsewhere Specified — Transformation
1.2.3. Energy Sector
1.2.3.1. Electricity, CHP and Heat plants
1.2.3.2. Coal Mines
1.2.3.3. Patent Fuel Plants
1.2.3.4. Coke Ovens
1.2.3.5. BKB/PB Plants
1.2.3.6. Gas Works
1.2.3.7. Blast Furnaces
1.2.3.8. Petroleum Refineries
1.2.3.9. Coal Liquefaction
1.2.3.10. Not Elsewhere Specified — Energy
1.2.4. Distribution losses
Distribution losses also include flaring of manufactured gases.
1.2.5. Non-energy use
1.2.5.1. Industry, Transformation and Energy Sectors
Non-energy use in all industry, transformation and energy sub-sectors, e.g. coal used to make methanol or ammonia.
1.2.5.1.1. Chemical and petrochemical sector
NACE Rev. 2 Divisions 20 and 21; non-energy use of coal includes use as feedstocks to produce fertiliser and as feedstocks for other petrochemical products.
1.2.5.2. Transport Sector
Non-energy use in all transport sub-sectors.
1.2.5.3. Other Sectors
Non-energy use in Commercial and Public Services, Households, Agriculture and Not Elsewhere Specified Other.
1.2.6. Final Energy Consumption — Industry Sector
1.2.6.1. Iron and Steel
1.2.6.2. Chemical and Petrochemical
1.2.6.3. Non-Ferrous Metals
1.2.6.4. Non-Metallic Minerals
1.2.6.5. Transport Equipment
1.2.6.6. Machinery
1.2.6.7. Mining and Quarrying
1.2.6.8. Food, Beverages and Tobacco
1.2.6.9. Pulp, Paper and printing
1.2.6.10. Wood and Wood Products
1.2.6.11. Construction
1.2.6.12. Textile and Leather
1.2.6.13. Not Elsewhere Specified — Industry
1.2.7. Final Energy Consumption — Transport Sector
1.2.7.1. Rail
1.2.7.2. Domestic Navigation
1.2.7.3. Not Elsewhere Specified — Transport
1.2.8. Final Energy Consumption — Other Sectors
1.2.8.1. Commercial and Public Services
1.2.8.2. Households
1.2.8.3. Agriculture/Forestry
1.2.8.4. Fishing
1.2.8.5. Not Elsewhere Specified — Other
1.2.9. Imports by country of origin AND exports by country of destination
Imports by country of origin and exports by country of destination shall be reported. Applicable to anthracite, coking coal, other bituminous coal, sub-bituminous coal, lignite, patent fuel, coke oven coke, coal tar, BKB, peat, peat products and oil shale and oil sands.
1.2.10. Calorific values
Applicable for anthracite, coking coal, other bituminous coal, sub-bituminous coal, lignite, patent fuel, coke oven coke, gas coke, coal tar, BKB, peat, peat products, oil shale and oil sands.
Both gross and net calorific values are to be declared for the following aggregates:
1.2.10.1. Production
1.2.10.2. Imports
1.2.10.3. Exports
1.2.10.4. Used in coke ovens
1.2.10.5. Used in blast furnaces
1.2.10.6. Used in Main Activity Producer Electricity only, Heat only and CHP units
1.2.10.7. Used in Industry
1.2.10.8. For Other Uses
1.3. Units of measurement
Reported quantities must be declared in kt (kilo-tonnes), except for manufactured gases (gas works gas, coke oven gas, blast furnace gas, other recovered gases), where the reported quantity must be declared in TJ GCV (tera-joules based on gross calorific values).
Calorific values must be declared in MJ/t (mega-joules per tonne).
1.4. Derogations and exemptions
Not applicable.
2. NATURAL GAS
2.1. Applicable energy products
This chapter covers the reporting of natural gas.
2.2. List of aggregates
The following list of aggregates shall be declared for natural gas.
2.2.1. Supply Sector
Declared quantities for the supply sector shall be expressed in both volume and energy units, and shall include the gross and net calorific values.
2.2.1.1. Indigenous Production
Includes off-shore production.
2.2.1.1.1. Associated Gas
Natural gas produced in association with crude oil.
2.2.1.1.2. Non-Associated Gas
Natural gas originating from fields producing hydrocarbons only in gaseous form.
2.2.1.1.3. Colliery Gas
Methane produced at coal mines or from coal seams, piped to the surface and consumed at collieries or transmitted by pipeline to consumers.
2.2.1.2. Receipts From Other Sources
2.2.1.2.1. Receipts from other sources: Oil and petroleum products
2.2.1.2.2. Receipts from other sources: Coal
2.2.1.2.3. Receipts from other sources: Renewables
2.2.1.3. Imports
2.2.1.4. Exports
2.2.1.5. International Marine Bunkers
2.2.1.6. Stock changes
2.2.1.7. Inland consumption (Observed)
2.2.1.8. Recoverable gas
Opening and closing stock levels shall be declared separately, as stocks on national territory and stocks held abroad, respectively. ‘Stock level’ means the quantity of gas available for delivery during any input-output cycle. This refers to recoverable natural gas stored in special storage facilities (depleted gas and/or oil field, aquifer, salt cavity, mixed caverns, or other), as well as stored liquefied natural gas. Cushion gas shall be excluded. The requirement of declaring calorific values is not applicable here.
2.2.1.9. Gas Vented
The volume of gas released into the air on the production site or at the gas processing plant. The requirement of declaring calorific values is not applicable here.
2.2.1.10. Gas Flared
The volume of gas burned in flares on the production site or at the gas processing plant. The requirement of declaring calorific values is not applicable here.
2.2.2. Transformation Sector
2.2.2.1. Main Activity Producer Electricity Only
2.2.2.2. Autoproducer Electricity Only
2.2.2.3. Main Activity Producer CHP Units
2.2.2.4. Autoproducer CHP Units
2.2.2.5. Main Activity Producer Heat Only
2.2.2.6. Autoproducer Heat Only
2.2.2.7. Gas Works
2.2.2.8. Coke Ovens
2.2.2.9. Blast Furnaces
2.2.2.10. Gas to liquids
2.2.2.11. Non specified — Transformation
2.2.3. Energy Sector
2.2.3.1. Coal Mines
2.2.3.2. Oil and Gas extraction
2.2.3.3. Inputs to oil refineries
2.2.3.4. Coke Ovens
2.2.3.5. Blast Furnaces
2.2.3.6. Gas Works
2.2.3.7. Electricity, CHP and Heat Plants
2.2.3.8. Liquefaction (LNG) or Gasification
2.2.3.9. Gas to Liquids
2.2.3.10. Not Elsewhere Specified — Energy
2.2.4. Distribution losses
2.2.5. Transport Sector
Final energy consumption and final non-energy consumption shall be declared separately for the following aggregates.
2.2.5.1. Road
2.2.5.2. Pipeline transport
2.2.5.3. Not Elsewhere Specified — Transport
2.2.6. Industry Sector
Final energy consumption and final non-energy consumption shall be declared separately for the following aggregates.
2.2.6.1. Iron and Steel
2.2.6.2. Chemical and Petrochemical
2.2.6.3. Non-Ferrous Metals
2.2.6.4. Non-Metallic Minerals
2.2.6.5. Transport Equipment
2.2.6.6. Machinery
2.2.6.7. Mining and Quarrying
2.2.6.8. Food, Beverages and Tobacco
2.2.6.9. Pulp, Paper and printing
2.2.6.10. Wood and Wood Products
2.2.6.11. Construction
2.2.6.12. Textile and Leather
2.2.6.13. Not Elsewhere Specified — Industry
2.2.7. Other Sectors
Final energy consumption and final non-energy consumption shall be declared separately for the following aggregates.
2.2.7.1. Commercial and Public Services
2.2.7.2. Households
2.2.7.3. Agriculture/Forestry
2.2.7.4. Fishing
2.2.7.5. Not Elsewhere Specified — Other
2.2.8. Imports by country of origin and exports by country of destination
Both the quantities of total natural gas and of the LNG part of it shall be declared, per country of origin for imports and per country of destination for exports.
2.2.9. Gas Storage Capacities
To be reported separately as gaseous gas storage facilities and LNG terminals (to be further distinguished as LNG import terminals or LNG export terminals).
2.2.9.1. Name
Name of the site of the storage facility or the LNG terminal.
2.2.9.2. Type (for the gaseous gas storage facilities only)
Type of storage, such as depleted gas field, aquifer, salt cavern, etc.
2.2.9.3. Working Capacity
For gaseous gas storage facilities: total gas storage capacity, minus the cushion gas. The cushion gas is the total volume of gas required as a permanent inventory to maintain adequate underground storage reservoir pressures and deliverability rates throughout the output cycle.
For LNG terminals: total gas storage capacity expressed in gaseous gas equivalent.
2.2.9.4. Peak Output
Maximum rate at which gas can be withdrawn from the storage concerned; this corresponds to the maximum withdrawal capacity.
2.2.9.5. Regasifying or Liquefying Capacity (for LNG terminals only)
The regasifying capacity must be reported for import terminals and the liquefying capacity must be reported for export terminals.
2.3. Units of measurement
Quantities of natural gas shall be declared as their energy content, i.e. in TJ, based on the gross calorific value. Where physical quantities are required, the unit is in 106 m3 assuming reference gas conditions (15 °C, 101 325 Pa).
Calorific values shall be declared in kJ/m3, assuming reference gas conditions (15 °C, 101 325 Pa).
Working capacity shall be declared in 106 m3, assuming reference gas conditions (15 °C, 101 325 Pa).
Peak output, regasifying capacity and liquefying capacity shall be declared in 106 m3/day, assuming reference gas conditions (15 °C, 101 325 Pa).
3. ELECTRICITY AND HEAT
3.1. Applicable energy products
This chapter covers heat and electricity.
3.2. List of aggregates
The following list of aggregates shall be declared for heat and electricity unless otherwise specified.
3.2.1. Electricity and heat production
The following specific definitions apply to the electricity and heat aggregates discussed in this chapter:
— |
Gross Electricity Production: the sum of the electrical energy produced by all the generating sets concerned (including pumped storage) measured at the output terminals of the main generators. |
— |
Gross Heat Production: the total heat produced by the installation, including the heat used by the installation’s auxiliaries that use a hot fluid (space heating, liquid fuel heating etc.) and losses in the installation/network heat exchanges, as well as heat from chemical processes used as a primary energy form. |
— |
Net Electricity Production: the gross electricity production less the electrical energy absorbed by the generating auxiliaries and the losses in the main generator transformers. |
— |
Net Heat Production: the heat supplied to the distribution system as determined based on measurements of the outgoing and return flows. |
Aggregates 3.2.1.1 to 3.2.1.11 must be declared separately for main activity producers and for autoproducers. Within these two types of plant, both gross and net electricity and heat production must be declared for electricity-only, heat-only and CHP units, separately wherever applicable.
3.2.1.1. Nuclear
3.2.1.2. Hydro (applicable only for electricity)
3.2.1.3. Geothermal
3.2.1.4. Solar
3.2.1.5. Tide, wave, ocean (applicable only for electricity)
3.2.1.6. Wind (applicable only for electricity)
3.2.1.7. Combustible fuels
Fuels capable of igniting or burning, i.e. reacting with oxygen to produce a significant rise in temperature, and combusted directly for the production of electricity and/or heat.
3.2.1.8. Heat Pumps (applicable only for heat)
3.2.1.9. Electric Boilers (applicable only for heat)
3.2.1.10. Heat from Chemical Processes
Heat originating from processes without input energy, such as a chemical reaction. Excludes waste heat originating from energy-driven processes, which should be reported as heat produced from the corresponding fuel.
3.2.1.11. Other Sources
3.2.2. Supply
For 3.2.2.1 and 3.2.2.2., quantities declared shall be in coherence with the values declared for aggregates 3.2.1.1 to 3.2.1.11.
3.2.2.1. Total Gross Production
3.2.2.2. Total Net Production
3.2.2.3. Imports
Amounts of electricity are considered as imported or exported when they have crossed the political boundaries of a country, whether customs clearance has taken place or not. If electricity transits through a country, the amount should be reported as both an import and an export.
3.2.2.4. Exports
See explanation under 3.2.2.3. ‘Imports’.
3.2.2.5. Used for Heat Pumps (applicable only for electricity)
3.2.2.6. Used for Electric Boilers (applicable only for electricity)
3.2.2.7. Used for Pumped Storage — pure pumped storage plants (applicable only for electricity)
3.2.2.8. Used for Pumped Storage — Mixed hydro plants (applicable only for electricity)
3.2.2.9. Used for Electricity Production (applicable only for heat)
3.2.3. Distribution losses
For electricity, includes losses in transformers which are not considered as integral parts of power plants.
3.2.4. Final energy consumption — Transport Sector
Final energy consumption and final non-energy consumption shall be declared separately for the following aggregates.
3.2.4.1. Rail
3.2.4.2. Pipeline transport
3.2.4.3. Road
3.2.4.4. Not Elsewhere Specified — Transport
3.2.5. Final energy consumption — Other sectors
3.2.5.1. Commercial and Public Services
3.2.5.2. Households
3.2.5.3. Agriculture/Forestry
3.2.5.4. Fishing
3.2.5.5. Not Elsewhere Specified — Other
3.2.6. Energy Sector
Excludes plants’ own use for pumped storage, heat pumps and electric boilers.
3.2.6.1. Coal Mines
3.2.6.2. Oil and Gas Extraction
3.2.6.3. Patent Fuel Plants
3.2.6.4. Coke Ovens
3.2.6.5. BKB/PB Plants
3.2.6.6. Gas Works
3.2.6.7. Blast Furnaces
3.2.6.8. Petroleum Refineries
3.2.6.9. Nuclear Industry
3.2.6.10. Coal Liquefaction Plants
3.2.6.11. Liquefaction (LNG)/Regasification Plants
3.2.6.12. Gasification Plants (biogas)
3.2.6.13. Gas-to-Liquids
3.2.6.14. Charcoal Production Plants
3.2.6.15. Not Elsewhere Specified — Energy
3.2.7. Industry sector
3.2.7.1. Iron and Steel
3.2.7.2. Chemical and Petrochemical
3.2.7.3. Non-Ferrous Metals
3.2.7.4. Non-Metallic Minerals
3.2.7.5. Transport Equipment
3.2.7.6. Machinery
3.2.7.7. Mining and Quarrying
3.2.7.8. Food, Beverages and Tobacco
3.2.7.9. Pulp, Paper and printing
3.2.7.10. Wood and Wood Products
3.2.7.11. Construction
3.2.7.12. Textile and Leather
3.2.7.13. Not Elsewhere Specified — Industry
3.2.8. Imports and exports
Imports and exports of quantities of electricity and heat by country of origin and destination, respectively, have to be reported. See explanation under 3.2.2.3. ‘Imports’.
3.2.9. Net production from autoproducers
For the following plants or activities, net production of electricity and net generation of heat from autoproducers shall be declared separately for electricity-only, heat-only and CHP units:
3.2.9.1. Energy Sector: Coal Mines
3.2.9.2. Energy Sector: Oil and Gas Extraction
3.2.9.3. Energy Sector: Patent Fuel Plants
3.2.9.4. Energy Sector: Coke Ovens
3.2.9.5. Energy Sector: BKB/PB Plants
3.2.9.6. Energy Sector: Gas Works
3.2.9.7. Energy Sector: Blast Furnaces
3.2.9.8. Energy Sector: Petroleum Refineries
3.2.9.9. Energy Sector: Coal Liquefaction Plants
3.2.9.10. Energy Sector: Liquefaction (LNG)/Regasification Plants
3.2.9.11. Energy Sector: Gasification Plants (biogas)
3.2.9.12. Energy Sector: Gas-to-Liquids
3.2.9.13. Energy Sector: Charcoal Production Plants
3.2.9.14. Energy Sector: Not Elsewhere Specified — Energy
3.2.9.15. Industry sector: Iron and Steel
3.2.9.16. Industry sector: Chemical and Petrochemical
3.2.9.17. Industry sector: Non-Ferrous Metals
3.2.9.18. Industry sector: Non-Metallic Minerals
3.2.9.19. Industry sector: Transport Equipment
3.2.9.20. Industry sector: Machinery
3.2.9.21. Industry sector: Mining and Quarrying
3.2.9.22. Industry sector: Food, Beverages and Tobacco
3.2.9.23. Industry sector: Pulp, Paper and printing
3.2.9.24. Industry sector: Wood and Wood Products
3.2.9.25. Industry sector: Construction
3.2.9.26. Industry sector: Textile and Leather
3.2.9.27. Industry sector: Not Elsewhere Specified — Industry
3.2.9.28. Transport Sector: Rail
3.2.9.29. Transport Sector: Pipeline transport
3.2.9.30. Transport Sector: Road
3.2.9.31. Transport Sector: Not Elsewhere Specified — Transport
3.2.9.32. Other sectors: Households
3.2.9.33. Other sectors: Commercial and Public Services
3.2.9.34. Other sectors: Agriculture/Forestry
3.2.9.35. Other sectors: Fishing
3.2.9.36. Other sectors: Not Elsewhere Specified — Other
3.2.10. Gross electricity and heat production from combustible fuels
The gross electricity produced, the heat sold and the fuel quantities used, including their corresponding total energy from the combustibles listed below, must be declared separately for main activity producers and for autoproducers. For these two types of producer, electricity and heat production must be declared separately wherever applicable for electricity-only, heat-only and CHP units.
3.2.10.1. Anthracite
3.2.10.2. Coking Coal
3.2.10.3. Other Bituminous Coal
3.2.10.4. Sub-Bituminous Coal
3.2.10.5. Lignite
3.2.10.6. Peat
3.2.10.7. Patent Fuel
3.2.10.8. Coke Oven Coke
3.2.10.9. Gas Coke
3.2.10.10. Coal Tar
3.2.10.11. BKB (Brown Coal Briquettes)
3.2.10.12. Gas Works Gas
3.2.10.13. Coke Oven Gas
3.2.10.14. Blast Furnace Gas
3.2.10.15. Other recovered Gases
3.2.10.16. Peat products
3.2.10.17. Oil shale and oil sands
3.2.10.18. Crude Oil
3.2.10.19. NGL
3.2.10.20. Refinery Gas
3.2.10.21. LPG
3.2.10.22. Naphtha
3.2.10.23. Kerosene Type Jet Fuel
3.2.10.24. Other Kerosene
3.2.10.25. Gas/Diesel oil
3.2.10.26. Fuel Oil
3.2.10.27. Bitumen
3.2.10.28. Petroleum Coke
3.2.10.29. Other Oil Products
3.2.10.30. Natural Gas
3.2.10.31. Industrial Waste
3.2.10.32. Renewable Municipal Waste
3.2.10.33. Non-Renewable Municipal Waste
3.2.10.34. Solid biofuels
3.2.10.35. Biogases
3.2.10.36. Biodiesels
3.2.10.37. Biogasolines
3.2.10.38. Other Liquid Biofuels
3.2.11. Net Maximum Electrical Capacity
The capacity shall be declared as on 31 December of the relevant reported year. Includes electrical capacity of both electricity-only and CHP units. The net maximum electrical capacity must be declared for both main activity producers and autoproducers. It is the sum of the net maximum capacities of all stations taken individually over a given period of operation. The period of operation assumed for present purposes is continuous running: in practice 15 hours or more per day. The net maximum capacity is the maximum power assumed to be solely active power that can be supplied, continuously, with the whole plant running, at the point of outlet to the network.
3.2.11.1. Nuclear
3.2.11.2. Pure hydro plants
3.2.11.3. Mixed hydro plants
3.2.11.4. Pure pumped storage plants
3.2.11.5. Geothermal
3.2.11.6. Solar photovoltaic
3.2.11.7. Solar thermal
3.2.11.8. Tide, wave, ocean
3.2.11.9. Wind
3.2.11.10. Combustible fuels
3.2.11.10.1. Type of generation: Steam
3.2.11.10.2. Type of generation: Internal combustion
3.2.11.10.3. Type of generation: Gas turbine
3.2.11.10.4. Type of generation: Combined cycle
3.2.11.10.5. Type of generation: Other
3.2.11.11. Other sources
3.2.12. Net Maximum Electrical Capacity Of Combustible Fuels
Net maximum electrical capacity of combustible fuels must be declared for both main activity producers and autoproducers, and separately for each type of single-fired or multi-fired plant mentioned below. Multi-fired systems include only units which can burn more than one fuel type on a continuous basis. Stations which have separate units using different fuels should be divided into the appropriate single-fuel categories. Indications on which type of fuel is used as primary and alternate must be added for each category of multi-fired plants.
3.2.12.1. Single Fuel Fired (for all categories of primary fuels)
3.2.12.2. Multi-Fired solids and liquids
3.2.12.3. Multi-Fired solids and natural gas
3.2.12.4. Multi-Fired liquids and natural gas
3.2.12.5. Multi-Fired solids, liquids and natural gas
3.3. Units of measurement
Electricity shall be declared in GWh (giga-watt hours), heat in TJ (tera-joules) and capacity in MW (megawatts)
If reporting of other fuels is required, the applicable units are defined in the relevant chapters of this Annex.
4. OIL AND PETROLEUM PRODUCTS
4.1. Applicable energy products
Unless otherwise specified, this data collection applies to all energy products listed in Annex A, Chapter 3.4. Oil (crude oil and petroleum products)
4.2. List of aggregates
The following list of aggregates shall be declared for all energy products listed in the previous paragraph, unless otherwise specified.
4.2.1. Supply of crude oil, NGL, refinery feedstocks, additives and other hydrocarbons
The following aggregates shall be declared for crude oil, NGL, refinery feedstocks, additives/oxygenates, biofuels in additives/oxygenates and other hydrocarbons:
4.2.1.1. Indigenous Production
Not applicable for refinery feedstocks and for biofuels.
4.2.1.2. Receipts From Other Sources.
Not applicable for crude oil, NGL and refinery feedstocks.
4.2.1.2.1. Receipts from other sources: from coal
4.2.1.2.2. Receipts from other sources: from natural gas
4.2.1.2.3. Receipts from other sources: from Renewables
4.2.1.3. Backflows From Petrochemical Sector
Only applicable for refinery feedstocks.
4.2.1.4. Products Transferred
Only applicable for refinery feedstocks.
4.2.1.5. Imports
Includes quantities of crude oil and products imported or exported under processing agreements (i.e. refining on account). Crude oil and NGLs should be reported as coming from the country of ultimate origin; refinery feedstocks and finished products should be reported as coming from the country of last consignment. Includes any gas liquids (e.g. LPG) extracted during the regasification of imported liquefied natural gas and petroleum products imported or exported directly by the petrochemical industry. Note: all trade of biofuels which have not been blended with transport fuels (i.e. in their pure form) should not be reported here. Re-exports of oil imported for processing within bonded areas should be included as an export of product from the processing country to the final destination.
4.2.1.6. Exports
The note for imports (4.2.1.5.) also applies to exports.
4.2.1.7. Direct Use
4.2.1.8. Stock changes
4.2.1.9. Observed Refinery Intake
Amounts measured as input to refineries
4.2.1.10. Refinery Losses
The difference between refinery intake (observed) and gross refinery output. Losses may occur during the distillation processes due to evaporation. Reported losses are positive. There may be volumetric gains but no gains in mass.
4.2.1.11. Opening Total Stocks On National Territory
4.2.1.12. Closing Total Stocks On National Territory
4.2.1.13. Net Calorific Value
4.2.1.13.1. Production (not applicable for refinery feedstocks and Biofuels in Additives/Oxygenates)
4.2.1.13.2. imports (not applicable for Biofuels in Additives/Oxygenates)
4.2.1.13.3. exports (not applicable for Biofuels in Additives/Oxygenates)
4.2.1.13.4. overall average
4.2.2. Supply of oil products
The following aggregates apply to finished products (refinery gas, ethane, LPG, naphtha, motor gasoline as well as its part of biogasoline, aviation gasoline, gasoline type jet fuel, kerosene type jet fuel as well as its bio part, other kerosene, gas/diesel oil, low and high sulphur fuel oil, white spirit and SBP, lubricants, bitumen, paraffin waxes, petroleum coke and other products). Crude oil and NGL used for direct burn should be included in deliveries of finished products and interproduct transfers.
4.2.2.1. Primary Product Receipts
4.2.2.2. Gross Refinery Output
4.2.2.3. Recycled Products
4.2.2.4. Refinery fuel (Petroleum Refineries)
Fuels used for production at refineries of electricity and heat sold should also be included in this category.
4.2.2.4.1. used in electricity only units/plants
4.2.2.4.2. used in CHP units
4.2.2.4.3. used in heat only units/plants
4.2.2.5. Imports
The note for imports in section 4.2.1.5. also applies here.
4.2.2.6. Exports
The note for imports in section 4.2.1.5. also applies here.
4.2.2.7. International Marine Bunkers
4.2.2.8. Interproduct Transfers
4.2.2.9. Products Transferred
4.2.2.10. Stock Changes
4.2.2.11. Opening Stock Levels
4.2.2.12. Closing Stock Levels
4.2.2.13. Stock Changes at main activity producers
Changes in stocks which are held by public utilities and are not included in stock levels and stock changes reported elsewhere. A stock build is shown as a negative number and a stock draw is shown as a positive number.
4.2.2.14. Average Net Calorific Values
4.2.3. Deliveries To The Petrochemical Sector
The observed delivery of finished petroleum products from primary sources (e.g. refineries, blending plants, etc.) to the inland market.
4.2.3.1. Gross Deliveries To The Petrochemical Sector
4.2.3.2. Energy Use In The Petrochemical Sector
Quantities of oil used as fuel for petrochemical processes such as steam cracking.
4.2.3.3. Non-Energy Use In The Petrochemical Sector
Quantities of oil used in the petrochemical sector for the purpose of producing ethylene, propylene, butylene, synthesis gas, aromatics, butadiene and other hydrocarbon-based raw materials in processes such as steam cracking, aromatics plants and steam reforming. Excludes amounts of oil used for fuel purposes.
4.2.3.4. Backflows From Petrochemical Sector To Refineries
4.2.4. Transformation sector
Both the quantities involved in energy use and non-energy use shall be declared.
4.2.4.1. Main Activity Producer Electricity Only
4.2.4.2. Autoproducer Electricity Only
4.2.4.3. Main Activity Producer CHP units
4.2.4.4. Autoproducer CHP units
4.2.4.5. Main Activity Producer Heat Only
4.2.4.6. Autoproducer Heat Only
4.2.4.7. Gas Works/Gasification Plants
4.2.4.8. Blended Natural Gas
4.2.4.9. Coke Ovens
4.2.4.10. Blast Furnaces
4.2.4.11. Petrochemical Industry
4.2.4.12. Patent Fuel Plants
4.2.4.13. Not Elsewhere Specified — Transformation
4.2.5. Energy sector
Both the quantities involved in energy use and non-energy use shall be declared.
4.2.5.1. Coal Mines
4.2.5.2. Oil and Gas Extraction
4.2.5.3. Coke Ovens
4.2.5.4. Blast Furnaces
4.2.5.5. Gas Works
4.2.5.6. Own use Electricity, CHP and heat plants.
4.2.5.7. Not Elsewhere Specified — Energy
4.2.6. Distribution losses
Both the quantities involved in energy use and non-energy use shall be declared.
4.2.7. Final Energy Consumption — Industry Sector
Both the quantities involved in energy use and non-energy use shall be declared.
4.2.7.1. Iron and Steel
4.2.7.2. Chemical and Petrochemical
4.2.7.3. Non-Ferrous Metals
4.2.7.4. Non-Metallic Minerals
4.2.7.5. Transport Equipment
4.2.7.6. Machinery
4.2.7.7. Mining and Quarrying
4.2.7.8. Food, Beverages and Tobacco
4.2.7.9. Pulp, Paper and printing
4.2.7.10. Wood and Wood Products
4.2.7.11. Construction
4.2.7.12. Textile and Leather
4.2.7.13. Not Elsewhere Specified — Industry
4.2.8. Final Energy Consumption — Transport Sector
Both the quantities involved in energy use and non-energy use shall be declared.
4.2.8.1. International Aviation
4.2.8.2. Domestic Aviation
4.2.8.3. Road
4.2.8.4. Rail
4.2.8.5. Domestic Navigation
4.2.8.6. Pipeline Transport
4.2.8.7. Not Elsewhere Specified — Transport
4.2.9. Final Energy Consumption — Other Sectors
Both the quantities involved in energy use and non-energy use shall be declared.
4.2.9.1. Commercial and Public Services
4.2.9.2. Households
4.2.9.3. Agriculture/Forestry
4.2.9.4. Fishing
4.2.9.5. Not Elsewhere Specified — Other
4.2.10. Imports by country of origin and exports by country of destination
Imports shall be declared by country of origin and exports by country of destination. The note for imports in section 4.2.1.5 also applies here.
4.2.11. Refinery capacity
Report the national total refining capacity and the breakdown of annual capacity by refinery in thousand metric tons per year. The following items shall be reported:
4.2.11.1. Name/Location
4.2.11.2. Atmospheric Distillation
4.2.11.3. Vacuum Distillation
4.2.11.4. Cracking (Thermal)
4.2.11.4.1. Of which Visbreaking
4.2.11.4.2. Of which Coking
4.2.11.5. Cracking (Catalytic)
4.2.11.5.1. Of which Fluid catalytic cracking (FCC)
4.2.11.5.2. Of which Hydro-cracking (HCK)
4.2.11.6. Reforming
4.2.11.7. Desulphurisation
4.2.11.8. Alkylation, Polymerisation, Isomeration
4.2.11.9. Etherification
4.3. Units of measurement
Reported quantities must be declared in kt (kilo-tonnes). Calorific values must be declared in MJ/t (mega-joules per tonne).
4.4. Exemptions
Cyprus is exempted from reporting the aggregates specified in Section 4.2.9 (Final energy consumption — Other Sectors); only the total values shall be reported. Cyprus is also exempted from reporting non-energy use under Sections 4.2.4 (Transformation sector), 4.2.5 (Energy Sector), 4.2.7 (Industry), 4.2.7.2 (Industry sector — of which Chemical and Petrochemical), 4.2.8 (Transport) and 4.2.9 (Other sectors).
5. RENEWABLE ENERGY AND ENERGY FROM WASTE
5.1. Applicable energy products
Unless otherwise specified, this data collection applies to all energy products listed in Annex A, Chapter 3.5. Renewables and waste. Only quantities of fuels used for energy purposes (for example in electricity and heat generation, combustion with energy recovery, in mobile engines in transport and for use in stationary engines) should be reported. Quantities used for non-energy purposes shall be excluded from reporting (for example: wood in construction and for producing furniture, use of biolubricants for lubrication, use of biobitumen for road surface). Passive thermal energy shall also be excluded from reporting (for example: passive solar thermal heating of buildings).
5.2. List of aggregates
Unless otherwise specified, the following list of aggregates shall be declared for all energy products listed in the previous paragraph. Ambient heat (heat pumps) only needs to be reported for the following sectors: Transformation (only for aggregates related to heat sold), Energy (only total, no subcategories), Industry total (only total, no subcategories), Commercial and Public Services, Households and Not elsewhere specified — Other.
5.2.1. Gross Electricity and Heat Production
The definitions of chapter 3.2.1. apply. The aggregates 5.2.1.1 to 5.2.1.18 must be declared separately for main activity producers and for autoproducers. For these two types of plant, gross electricity and gross heat production must be declared for electricity-only, heat-only and CHP units, separately wherever applicable.
5.2.1.1. Pure hydro plants (applicable only for electricity)
5.2.1.2. Mixed hydro plants (applicable only for electricity)
5.2.1.3. Pure pumped storage plants (applicable only for electricity)
5.2.1.4. Geothermal
5.2.1.5. Solar photovoltaic (applicable only for electricity)
5.2.1.6. Solar thermal
5.2.1.7. Tide, wave, ocean (applicable only for electricity)
5.2.1.8. Wind (applicable only for electricity)
5.2.1.9. On-shore wind
5.2.1.10. Off-shore wind
5.2.1.11. Renewable municipal waste
5.2.1.12. Non-renewable municipal waste
5.2.1.13. Solid biofuels
5.2.1.14. Biogases
5.2.1.15. Biodiesels
5.2.1.16. Biogasolines
5.2.1.17. Other liquid biofuels
5.2.1.18. Heat pumps (applicable only for heat)
5.2.2. Supply
5.2.2.1. Production
5.2.2.2. Imports
5.2.2.3. Exports
5.2.2.4. Stock changes
5.2.3. Transformation Sector
5.2.3.1. Main Activity Producer Electricity Only
5.2.3.2. Main Activity Producer Combined Heat and Power (CHP) Units
5.2.3.3. Main Activity Producer Heat Only
5.2.3.4. Autoproducer Electricity Only
5.2.3.5. Autoproducer Combined Heat and Power (CHP) Units
5.2.3.6. Autoproducer Heat Only
5.2.3.7. Patent Fuel Plants
5.2.3.8. BKB/PB Plants
5.2.3.9. Gas Works
5.2.3.10. Blast Furnaces
5.2.3.11. Natural gas blending plants
5.2.3.12. For Blending with motor gasoline/diesel/kerosene:
5.2.3.13. Charcoal production plants
5.2.3.14. Not Elsewhere Specified — Transformation
5.2.4. Energy Sector
5.2.4.1. Gasification plants (biogas)
5.2.4.2. Electricity, CHP and Heat plants
5.2.4.3. Coal Mines
5.2.4.4. Patent Fuel Plants
5.2.4.5. Coke Ovens
5.2.4.6. Petroleum Refineries
5.2.4.7. BKB/PB Plants
5.2.4.8. Gas Works
5.2.4.9. Blast Furnaces
5.2.4.10. Charcoal production plants
5.2.4.11. Not Elsewhere Specified — Energy
5.2.5. Distribution losses
5.2.6. Final Energy Consumption — Industry Sector
5.2.6.1. Iron and Steel
5.2.6.2. Chemical and Petrochemical
5.2.6.3. Non-Ferrous Metals
5.2.6.4. Non-Metallic Minerals
5.2.6.5. Transport Equipment
5.2.6.6. Machinery
5.2.6.7. Mining and Quarrying
5.2.6.8. Food, Beverages and Tobacco
5.2.6.9. Pulp, Paper and printing
5.2.6.10. Wood and Wood Products
5.2.6.11. Construction
5.2.6.12. Textile and Leather
5.2.6.13. Not Elsewhere Specified — Industry
5.2.7. Final Energy Consumption — Transport Sector
5.2.7.1. Rail
5.2.7.2. Road
5.2.7.3. Domestic Navigation
5.2.7.4. Not Elsewhere Specified — Transport
5.2.8. Final Energy Consumption — Other Sectors
5.2.8.1. Commercial and Public Services
5.2.8.2. Households
5.2.8.3. Agriculture/Forestry
5.2.8.4. Fishing
5.2.8.5. Not Elsewhere Specified — Other
5.2.9. Net maximum electrical capacity
Capacity shall be declared as on 31 December of the relevant reported year. Includes the electrical capacity of both electricity-only and CHP units. The net maximum electrical capacity is the sum of the net maximum capacities of all stations taken individually over a specific period of operation. The period of operation assumed for present purposes is continuous running: in practice 15 hours or more per day. The net maximum capacity is the maximum power assumed to be solely active power that can be supplied, continuously, with the whole plant running, at the point of outlet to the network.
5.2.9.1. Pure hydro plants
5.2.9.2. Mixed hydro plants
5.2.9.3. Pure pumped storage plants
5.2.9.4. Geothermal
5.2.9.5. Solar photovoltaic
5.2.9.6. Solar thermal
5.2.9.7. Tide, wave, ocean
5.2.9.8. On-shore wind
5.2.9.9. Off-shore wind
5.2.9.10. Industrial waste
5.2.9.11. Municipal waste
5.2.9.12. Solid biofuels
5.2.9.13. Biogases
5.2.9.14. Biodiesels
5.2.9.15. Biogasolines
5.2.9.16. Other liquid biofuels
5.2.10. Technical characteristics
5.2.10.1. Solar collector surface
The total surface area of the installed solar collectors is to be declared. The solar collector surface relates only to solar collectors used for the production of solar thermal heat; solar collector surface used for electricity generation does not have to be reported here (solar PV and concentrated solar power). The surface area of all solar collectors shall be included: glazed and unglazed collectors, flat-plate and vacuum tube with a liquid or air as the energy carrier.
5.2.10.2. Production capacity for Biogasoline
5.2.10.3. Production capacity for Biodiesels
5.2.10.4. Production capacity for Bio jet kerosene
5.2.10.5. Production capacity for Other Liquid Biofuels
5.2.10.6. Average net calorific value for Biogasoline
5.2.10.7. Average net calorific value for Bioethanol
5.2.10.8. Average net calorific value for Biodiesels
5.2.10.9. Average net calorific value for Bio jet kerosene
5.2.10.10. Average net calorific value for Other Liquid Biofuels
5.2.10.11. Average net calorific value for Charcoal
5.2.11. Production of solid biofuels and biogases
The total production of solid biofuels (excluding charcoal) shall be split among the following fuels:
5.2.11.1. Fuelwood, wood residues and by-products
5.2.11.1.1. Wood pellets as part of Fuelwood, wood residues and by-products
5.2.11.2. Black liquor
5.2.11.3. Bagasse
5.2.11.4. Animal waste
5.2.11.5. Other vegetal materials and residues
5.2.11.6. Renewable fraction of industrial waste
The total production of biogas shall be split among the following production methods:
5.2.11.7. Biogases from anaerobic fermentation: landfill gas
5.2.11.8. Biogases from anaerobic fermentation: sewage sludge gas
5.2.11.9. Biogases from anaerobic fermentation: other biogases from anaerobic fermentation
5.2.11.10. Biogases from thermal processes
5.2.12. Imports by country of origin AND exports by country of destination
Imports shall be reported by country of origin and exports by country of destination. Applicable to biogasolines, bioethanol, bio jet kerosene, biodiesels, other liquid biofuels, wood pellets.
5.3. Units of measurement
Electricity shall be declared in GWh (giga-watt hours), heat in TJ (tera-joules) and electrical capacity in MW (megawatts).
Reported quantities shall be declared in TJ NCV (tera-joules based on net calorific value), except for charcoal, biogasoline, bioethanol, bio jet kerosenese, biodiesels, and other liquid biofuels which shall be declared in kt (kilo-tonnes).
Calorific values must be declared in MJ/t (mega-joules per tonne).
Solar collector surface shall be declared in 1000 m2.
Production capacity shall be declared in kt (kilo-tonnes) per year.
6. ANNUAL NUCLEAR STATISTICS
The following data concerning the civil use of nuclear energy must be declared:
6.1. List of aggregates
6.1.1. Enrichment capacity
The annual separative work capacity of operational enrichment plants (isotopic separation of uranium).
6.1.2. Production capacity of fresh fuel elements
The annual production capacity of fuel fabrication plants. MOX fuel fabrication plants are excluded.
6.1.3. Production capacity of MOX fuel fabrication plants
The annual production capacity of MOX fuel fabrication plants.
MOX is a fuel that contains a mixture of plutonium and uranium (mixed oxide).
6.1.4. Production of fresh fuel elements
Production of finished fresh fuel elements in nuclear fuel fabrication plants. Rods or other partial products are not included. Fabrication plants producing MOX fuel are also excluded.
6.1.5. Production of MOX fuel elements
Production of finished fresh fuel elements in MOX fuel fabrication plants. Rods or other partial products are not included.
6.1.6. Production of nuclear heat
The total amount of heat generated by nuclear reactors for the production of electricity or for other useful applications of heat.
6.1.7. Annual average burnup of definitively discharged irradiated fuel elements
Calculated average of the burnup of the fuel elements which have been definitively discharged from nuclear reactors during the reference year concerned. Excludes fuel elements which are temporarily discharged and are likely to be reloaded again later.
6.1.8. Production of Uranium and Plutonium in reprocessing plants
Uranium and plutonium produced in reprocessing plants during the reference year.
6.1.9. Capacity (Uranium and Plutonium) of reprocessing plants
Annual reprocessing capacity of uranium and plutonium.
6.2. Units of measurement
tSWU (tonnes of separative work units) for 6.1.1.
tHM (tonnes of heavy metal) for 6.1.4, 6.1.5., 6.1.8.
tHM (tonnes of heavy metal) per year for 6.1.2., 6.1.3, 6.1.9
TJ (tera-joules) for 6.1.6.
GWd/tHM (gigawatt-day per tonne of heavy metal) for 6.1.7.
7. DETAILED STATISTICS ON FINAL ENERGY CONSUMPTION
The following disaggregated data concerning final energy consumption must be declared.
7.1. List of aggregates
7.1.1. Industry sector
To be reported as per the definitions provided in section 2.6.1 of Annex A.
7.1.1.1. Mining and Quarrying
7.1.1.1.1. Mining of metal ores
7.1.1.1.2. Other mining and quarrying
7.1.1.1.3. Mining support service activities
7.1.1.2. Food, Beverages and Tobacco
7.1.1.2.1. Manufacture of food products
7.1.1.2.2. Manufacture of beverages
7.1.1.2.3. Manufacture of tobacco products
7.1.1.3. Textile and Leather
7.1.1.4. Wood and Wood Products
7.1.1.5. Pulp, Paper and Printing
7.1.1.5.1. Manufacture of paper and paper products
7.1.1.5.1.1. Manufacture of pulp
7.1.1.5.1.2. Other paper and paper products
7.1.1.5.2. Printing and reproduction of recorded media
7.1.1.6. Chemical and Petrochemical
7.1.1.6.1. Manufacture of chemicals and chemical products
7.1.1.6.2. Manufacture of basic pharmaceutical products and pharmaceutical preparations
7.1.1.7. Non-Metallic Minerals
7.1.1.7.1. Manufacture of glass and glass products
7.1.1.7.2. Manufacture of cement, lime and plaster (incl. Clinker)
7.1.1.7.3. Other non-metallic mineral products
7.1.1.8. Iron and Steel [Manufacture of basic metals A]
7.1.1.9. Non-ferrous metals industries [Manufacture of basic metals B]
7.1.1.9.1. Aluminium production
7.1.1.9.2. Other non-ferrous metals industries
7.1.1.10. Machinery
7.1.1.10.1. Manufacture of fabricated metal products, except machinery and equipment
7.1.1.10.2. Manufacture of computer, electronic and optical products
7.1.1.10.3. Manufacture of electrical equipment
7.1.1.10.4. Manufacture of machinery and equipment n.e.c.
7.1.1.11. Transport Equipment
7.1.1.12. Not Elsewhere Specified — Industry
7.1.1.12.1. Manufacture of rubber and plastic products
7.1.1.12.2. Manufacture of furniture
7.1.1.12.3. Other manufacturing
7.1.2. Households sector
To be reported as per the definitions provided in section 2.6.3.2 of Annex A.
7.1.2.1. Households: Space heating
7.1.2.2. Households: Space cooling
7.1.2.3. Households: Water heating
7.1.2.4. Households: Cooking
7.1.2.5. Households: Lighting and appliances
Only concerns electricity
7.1.2.6. Households: Other end uses
7.2. Applicable energy products
Unless otherwise specified, this data collection applies to all energy products listed in Annex A.
Eurostat will specify the actual list of energy products for which data covered by point 7 of Annex B should be reported in the reporting template, as a subset of those listed in point 3 of Annex A.
7.3. Units of measurement
Quantities of solid fossil fuels shall be declared in kt (kilo-tonnes);
Quantities of crude oil and petroleum products must be declared in kt (kilo-tonnes);
Quantities of natural gas and manufactured gases (gas works gas, coke oven gas, blast furnace gas, other recovered gases) must be declared by energy content, in TJ GCV (terajoules based on gross calorific values);
Electricity shall be declared in GWh (giga-watt hours);
Quantities of heat must be declared in TJ (tera-joules based on net calorific values);
Quantities of renewables and waste must be declared in TJ NCV (tera-joules based on net calorific value), except for charcoal, biogasoline, bioethanol, bio jet kerosenese, biodiesels, and other liquid biofuels, which shall be declared in kt (kilo-tonnes).
Calorific values for solid fossil fuels, crude oil and petroleum products and renewables and waste must be declared in MJ/t (mega-joules per tonne).
Calorific values for natural gas and manufactured gases shall be declared in kJ/m3, assuming reference gas conditions (15 °C, 101 325 Pa).
For other energy products for which reporting is required, the applicable units are defined in the relevant chapters of this Annex.
7.4. Deadline for transmission of data:
Data shall be submitted by 31 March of the second year following the reported year.
7.5. Exemptions
Cyprus is exempted from reporting the disaggregated final energy consumption of crude oil and petroleum products (as defined in Section 3.4 of Annex A) for all aggregates covered by section 7.1.2 of this Annex (Households).
ANNEX C
MONTHLY ENERGY STATISTICS
This Annex describes the scope, units, reported period, frequency, deadline and transmission modalities for the monthly collection of energy statistics.
Explanations of terms for which a specific explanation is not supplied in this Annex can be found in Annex A.
The following provisions apply to all data collections specified in this Annex:
(a) |
Reported period: The reported period of declared data shall be one calendar month. |
(b) |
Frequency: Data shall be declared on a monthly basis. |
(c) |
Transmission format: The transmission format shall conform to the relevant interchange standard specified by Eurostat. |
(d) |
Transmission method: Data shall be submitted or uploaded by electronic means to the single entry point for data at Eurostat. |
1. SOLID FUELS
1.1. Applicable energy products
This chapter covers the reporting of:
1.1.1. Hard coal
1.1.2. Brown coal
1.1.3. Peat
1.1.4. Oil shale and oil sands
1.1.5. Coke oven coke
1.2. List of aggregates
1.2.1. The following aggregates shall be declared for hard coal:
1.2.1.1. Production
1.2.1.2. Recovered products
1.2.1.3. Imports
1.2.1.4. Imports from outside EU
1.2.1.5. Exports
1.2.1.6. Opening Total Stocks On National Territory
These are the quantities held by mines, importers and consumers who import directly.
1.2.1.7. Closing Total Stocks On National Territory
These are the quantities held by mines, importers and consumers who import directly.
1.2.1.8. Deliveries to main activity producers
1.2.1.9. Deliveries to coking plants
1.2.1.10. Deliveries to total industry
1.2.1.11. Deliveries to iron and steel industry
1.2.1.12. Other deliveries (services, households, etc.). The amount of hard coal delivered to sectors not specifically mentioned or not belonging to transformation, energy, industry or transport.
1.2.2. The following aggregates shall be declared for brown coal, peat and oil shale and oil sands:
1.2.2.1. Production
1.2.2.2. Imports
1.2.2.3. Exports
1.2.2.4. Opening Total Stocks On National Territory
These are the quantities held by mines, importers and consumers who import directly.
1.2.2.5. Closing Total Stocks On National Territory
These are the quantities held by mines, importers and consumers who import directly.
1.2.2.6. For peat, stock changes can be declared instead of opening and closing total stocks.
1.2.2.7. Deliveries to main activity producers
1.2.3. The following aggregates shall be declared for coke oven coke:
1.2.3.1. Production
1.2.3.3. Imports
1.2.3.4. Imports from outside the EU
1.2.3.5. Exports
1.2.3.6. Opening Total Stocks On National Territory
These are the quantities held by producers, importers and consumers who import directly.
1.2.3.7. Closing Total Stocks On National Territory
These are the quantities held by producers, importers and consumers who import directly.
1.2.3.8. Deliveries to iron and steel industry
1.3. Units of measurement
Reported quantities must be declared in kt (kilo-tonnes).
1.4. Deadline for transmission of data
Within two calendar months following the reported month.
2. ELECTRICITY
2.1. Applicable energy products
This chapter covers the reporting of electricity.
2.2. List of aggregates
The following aggregates shall be declared for electricity:
2.2.1. Net electricity production from nuclear plants
2.2.2. Net electricity production from conventional thermal power generation using coal
2.2.3. Net electricity production from conventional thermal power generation using oil
2.2.4. Net electricity production from conventional thermal power generation using gas
2.2.5. Net electricity production from conventional thermal power generation using combustible renewables (such as solid biofuels, biogases, liquid biofuels, renewable municipal waste)
2.2.6. Net electricity production from conventional thermal power generation using other non-renewable combustible fuels (such as non-renewable industrial and non-renewable municipal waste)
2.2.7. Net electricity production from pure hydro plants
2.2.8. Net electricity production from mixed hydro plants
2.2.9. Net electricity production from pure pumped storage hydro plants
2.2.10. Net electricity production from wind installations on shore
2.2.11. Net electricity production from wind installations off shore
2.2.12. Net electricity production from solar PV installations
2.2.13. Net electricity production from solar thermal installations
2.2.14. Net electricity production from geothermal power generation
2.2.15. Net electricity production from other renewable sources (such as tide, wave, ocean and other non-combustible renewable sources)
2.2.16. Net electricity production from non-specified origin
2.2.17. Imports
2.2.17.1. Of which from the EU
2.2.18. Exports
2.2.18.1. Of which to the EU
2.2.19. Electricity used for pumped storage
2.3. Units of measurement
Reported quantities must be declared in GWh (giga-watt hours).
2.4. Deadline for transmission of data
Within two calendar months following the reported month.
3. OIL AND PETROLEUM PRODUCTS
3.1. Applicable energy products
Unless otherwise specified, this data collection applies to all energy products listed in Annex A, Chapter 3.4. Oil (crude oil and petroleum products).
The ‘Other Products’ category includes both the quantities that correspond to the definition in Annex A Chapter 3.4 and also the quantities of white spirit and SBP, lubricants, bitumen and paraffin waxes; these products should not be declared separately.
3.2. List of aggregates
The following aggregates shall be declared for all energy products listed in the previous paragraph unless otherwise specified.
3.2.1. Supply of crude oil, NGL, refinery feedstocks, additives and other hydrocarbons
Note for additives and biofuels: include here not only already blended volumes, but also all quantities destined for blending.
The following aggregates shall be declared for crude oil, NGL, refinery feedstocks, additives/oxygenates, biofuels and other hydrocarbons:
3.2.1.1. Indigenous Production (not applicable for refinery feedstocks and biofuels).
3.2.1.2. Receipts from other sources (not applicable for crude oil, NGL, refinery feedstocks)
3.2.1.3. Backflows
Finished or semi-finished products which are returned from final consumers to refineries for processing, blending or sale. They are usually by-products of petrochemical manufacturing. Only applicable for refinery feedstocks.
3.2.1.4. Products Transferred
Imported petroleum products which are reclassified as feedstocks for further processing in the refinery, without delivery to final consumers. Only applicable for refinery feedstocks.
3.2.1.5. Imports
3.2.1.6. Exports
Note for import and exports: Includes quantities of crude oil and products imported or exported under processing agreements (i.e. refining on account). Crude oil and NGLs should be reported as coming from the country of ultimate origin; refinery feedstocks and finished products should be reported as coming from the country of last consignment. Includes any gas liquids (e.g. LPG) extracted during the regasification of imported liquefied natural gas and petroleum products imported or exported directly by the petrochemical industry.
3.2.1.7. Direct Use
3.2.1.8. Stock changes
A stock build is shown as a positive number and a stock draw is shown as a negative number.
3.2.1.9. Observed Refinery Intake
This is defined as the total amount of oil (including Other hydrocarbons and Additives) observed to have entered the refinery process (input to refineries).
3.2.1.10. Refinery Losses
The difference between observed refinery intake and gross refinery output. Losses may occur during distillation processes due to evaporation. Reported losses are positive. There may be volumetric gains but no gains in mass.
3.2.2. Supply of finished products
The following aggregates shall be declared for Crude oil, NGL, Refinery gas, Ethane, LPG, Naphtha, Biogasoline, Non-biogasoline, Aviation gasoline, Gasoline type jet fuel, Bio jet kerosene, Non-bio jet Kerosene, Other kerosene, Biodiesels, Non-bio gas/diesel oil, LSFO, HSFO, Petroleum coke, and Other products:
3.2.2.1. Primary Product Receipts
3.2.2.2. Gross Refinery Output (not applicable for crude oil and NGL)
3.2.2.3. Recycled Products (not applicable for crude oil and NGL)
3.2.2.4. Refinery Fuel (not applicable for crude oil and NGL)
Annex A Chapter 2.3. Energy sector — Petroleum Refineries; Includes fuels used at the refineries for the production of electricity and heat sold.
3.2.2.5. Imports (not applicable for crude oil, NGL and refinery gas)
3.2.2.6. Exports (not applicable for crude oil, NGL and refinery gas)
The note made for imports and exports in section 3.2.1 also applies here.
3.2.2.7. International Marine Bunkers (not applicable for crude oil and NGL)
3.2.2.8. Interproduct Transfers
3.2.2.9. Products Transferred (not applicable for crude oil and NGL)
3.2.2.10. Stock Changes (not applicable for crude oil, NGL and refinery gas)
A stock build is shown as a positive number and a stock draw is shown as a negative number.
3.2.2.11. Observed Gross Inland Deliveries
The observed delivery of finished petroleum products from primary sources (e.g. refineries, blending plants, etc.) to the inland market.
3.2.2.11.1. International Aviation (applicable only for Aviation gasoline, Gasoline type jet fuel, Bio jet kerosene, Non-bio jet Kerosene)
3.2.2.11.2. Main activity producer power plants
3.2.2.11.3. Road (applicable only for LPG)
3.2.2.11.4. Domestic navigation and Rail (applicable only for Biodiesels, Non-bio gas/diesel oil)
3.2.2.12. Petrochemical
3.2.2.13. Backflow to refineries (not applicable for crude oil and NGL)
3.2.3. Imports by origin — exports by destination
Imports shall be reported by country of origin and exports by country of destination. The note made for imports and exports in section 3.2.1 also applies here.
3.2.4. Stock levels
The following opening and closing stocks must be declared for all energy products, including for additives/oxygenates but except for refinery gas:
3.2.4.1. Stocks on national territory
Stocks in the following locations: refinery tanks, bulk terminals, pipeline tankage, barges and coastal tankers (when port of departure and destination are in the same country), tankers in a port of a member country (if their cargo is to be discharged at the port), inland ship bunkers. Excludes stocks of oil held in pipelines, in rail tanks cars, in truck tanks cars, in sea-going ships’ bunkers, in service stations, in retail stores and in bunkers at sea.
3.2.4.2. Stocks held for other countries under bilateral government agreements
Stocks on national territory which belong to another country and to which access is guaranteed by an agreement between the respective governments.
3.2.4.3. Stocks with known foreign destination
Stocks not included in point 3.2.4.2 on national territory which belong to and are destined for another country. These stocks may be located inside or outside bonded areas.
3.2.4.4. Other stocks held in bonded areas
Includes stocks not included in point 3.2.4.2 nor 3.2.4.3 irrespective of whether they have received customs clearance or not.
3.2.4.5. Stocks held by major consumers
Include stocks which are subject to government control. This definition does not include other consumer stocks.
3.2.4.6. Stocks held on board incoming ocean vessels in port or at mooring
Stocks irrespective of whether they have been cleared by customs or not. This category excludes stocks on board vessels at high seas.
Includes oil in coastal tankers if both their port of departure and destination are in the same country. In the case of incoming vessels with more than one port of unloading, only report the amount to be unloaded in the reporting country.
3.2.4.7. Stocks held by government on national territory
Includes non-military stocks that are held by the government within the national territory, and are government owned or controlled and held exclusively for emergency purposes.
Excludes stocks held by state oil companies or electric utilities or stocks held directly by oil companies on behalf of governments.
3.2.4.8. Stocks held by stock holding organisation on national territory
Stocks held by both public and private corporations established to maintain stocks exclusively for emergency purposes.
Excludes mandatory stocks held by private companies.
3.2.4.9. All other stocks held on national territory
All other stocks satisfying the conditions described in point 3.2.4.1 above.
3.2.4.10. Stocks held abroad under bilateral government agreements
Stocks belonging to the reporting country but held in another country, to which access is guaranteed by an agreement between the respective governments.
3.2.4.10.1. Of which: Government stocks
3.2.4.10.2. Of which: Holding organisation’s stocks
3.2.4.10.3. Of which: Other stocks
3.2.4.11. Stocks held abroad designated definitely for import stocks
Stocks that are not included in category 10 and that belong to the reporting state but are held in another state and are awaiting import there.
3.2.4.12. Other stocks in bonded areas
Other stocks in the national territory not included in the above categories.
3.2.4.13. Pipeline fill
Oil (crude oil and petroleum products) contained in pipelines, necessary to maintain flow in the pipelines.
In addition, a breakdown of quantities per corresponding country must be declared for:
3.2.4.13.1. closing stocks held for other countries under official agreement, by beneficiary,
3.2.4.13.2. closing stocks held for other countries under official agreement, of which held as stock tickets, by beneficiary,
3.2.4.13.3. closing stocks with known foreign destination, by beneficiary,
3.2.4.13.4. closing stocks held abroad under official agreement, by location,
3.2.4.13.5. closing stocks held abroad under official agreement, of which held as stock tickets, by location,
3.2.4.13.6. closing stocks held abroad designated definitely for import into the declarer’s country, by location.
‘Opening stocks’ means the stocks on the last day of the month preceding the reported one. ‘Closing stocks’ means the stocks on the last day of the reported month.
3.3. Units of measurement
Reported quantities must be declared in kt (kilo-tonnes).
3.4. Deadline for transmission of data
Within 55 days following the reported month.
3.5. Geographical notes
For statistical reporting purposes only, the clarifications in Annex A Chapter 1 apply with the following specific exception: Switzerland includes Liechtenstein
4. NATURAL GAS
4.1. Applicable energy products
This chapter covers the reporting of natural gas.
4.2. List of aggregates
The following aggregates shall be declared for natural gas.
4.2.1. Indigenous Production
All dry marketable production within national boundaries, including offshore production. Production is measured after purification and extraction of NGLs and sulphur. Excludes extraction losses and quantities reinjected, vented or flared. Includes quantities used within the natural gas industry, in gas extraction, pipeline systems and processing plants.
4.2.2. Imports (Entries)
4.2.3. Exports (Exits)
Note for imports and exports: Report all natural gas volumes which have physically crossed the national boundaries of the country, whether customs clearance has taken place or not. This includes quantities transiting your country; transit volumes should be included as an import and as an export. Imports of liquefied natural gas should cover only the dry marketable equivalent, including amounts used as own consumption in the regasification process. The amounts used as own consumption during regasification should be reported under Own use and losses of the natural gas industry (see 4.2.10). Any gas liquids (e.g. LPG) extracted during the regasification process of imported LNG should be reported under ‘Receipts from other sources’ of ‘Other hydrocarbons’ as defined in Chapter 3 of this annex (OIL AND PETROLEUM PRODUCTS).
4.2.4. Stock changes
A stock build is shown as a positive number and a stock draw is shown as a negative number.
4.2.5. Observed Gross Inland Deliveries
This category represents deliveries of marketable gas to the inland market, including gas used by the gas industry for heating and operation of their equipment (i.e. consumption in gas extraction, in the pipeline system and in processing plants); losses in transmission and distribution should also be included.
4.2.6. Opening levels of stocks held on national territory
4.2.7. Closing levels of stocks held on national territory
4.2.8. Opening levels of stocks held abroad
4.2.9. Closing levels of stocks held abroad
Note for levels of stocks: includes natural gas stored in gaseous form as well as in liquefied form.
4.2.10. Own use and losses of the natural gas industry
Quantities used by the gas industry for heating and operation of its equipment (i.e. consumption in gas extraction, in the pipeline system and in processing plants); includes losses in transmission and distribution.
4.2.11. Imports (entries) by origin and exports (exits) by destination
Imports (entries) shall be reported by country of origin and exports (exits) by country of destination. The note made for imports and exports in section 4.2.3 also applies here. Imports and exports are to be declared only for the neighbouring country or country with a direct pipeline connection or, in the case of LNG, for the country where the gas has been loaded onto the transport ship.
4.2.12. Deliveries to power generation
4.3. Units of measurement
Quantities must be declared in two units:
4.3.1. |
in physical quantity, in million m3 (million cubic metres) assuming reference gas conditions (15 °C, 101 325 Pa), |
4.3.2. |
in energy content, in TJ (tera-joules), based on the gross calorific value. |
4.4. Deadline for transmission of data
Within 55 days following the reported month.
ANNEX D
SHORT TERM MONTHLY STATISTICS
This Annex describes the scope, units, reported period, frequency, deadline and transmission modalities for the short-term monthly collection of statistical data.
Explanations of terms for which a specific explanation is not supplied in this Annex can be found in Annex A.
The following provisions apply to all data collections specified in this Annex:
(a) |
Reported period: The reported period of declared data shall be one calendar month. |
(b) |
Frequency: Data shall be declared on a monthly basis. |
(c) |
Transmission format: The transmission format shall conform to the relevant interchange standard specified by Eurostat. |
(d) |
Transmission method: Data shall be submitted or uploaded by electronic means to the single entry point for data at Eurostat. |
1. NATURAL GAS
1.1. Applicable energy products
This chapter covers the reporting of natural gas.
1.2. List of aggregates
The following aggregates shall be declared.
1.2.1. Production
1.2.2. Imports
1.2.3. Exports
Note for imports and exports: report all natural gas volumes which have physically crossed the national boundaries of the country, whether customs clearance has taken place or not. This includes quantities transiting your country; transit volumes should be included as an import and as an export. Imports of liquefied natural gas should cover only the dry marketable equivalent, including amounts used as own consumption in the regasification process.
1.2.4. Stock change
1.2.5. Total closing stocks on national territory
1.3. Units of measurement
Reported quantities must be declared in TJ (tera-joules), based on the gross calorific value (GCV).
1.4. Deadline for transmission of data
Within one calendar month following the reported month.
2. CRUDE OIL IMPORTS AND SUPPLY
2.1. Applicable energy products
This chapter covers the reporting of crude oil.
2.2. Definitions
2.2.1. Imports
Imports cover every quantity of crude oil which either enters the customs territory of the Member State or comes from another Member State for purposes other than transit. Crude oil used for stock building shall be included.
Oil extracted from the seabed over which a Member State exercises exclusive rights for the purposes of exploitation and entering the customs territory of the Community shall be excluded from imports.
2.2.2. Supply:
Supply covers the crude oil imported and the crude oil produced in the Member State during the reference period. The provision of crude oil from previously built stocks is excluded.
2.2.3. CIF price:
The CIF (cost, insurance and freight) price includes the FOB (free on board) price, which is the price actually invoiced at the port/place of loading in addition to the cost of transport, insurance and charges linked to crude oil transfer operations.
The CIF price of the crude oil produced in a Member State is to be calculated free at port of discharge or free at frontier, i.e. at the moment when the crude oil falls under the customs jurisdiction of the importing country.
2.2.4. API gravity:
The API gravity is a measure of how heavy/light crude oil is compared to water. The API gravity is to be reported according to the following formula, with respect to the specific gravity (SG): API = (141,5 ÷ SG) – 131,5
2.3. List of aggregates
2.3.1. The following list of aggregates shall be declared for crude oil imports split by type and geographical area of production:
2.3.1.1. the designation of the crude oil
2.3.1.2. the average API gravity
2.3.1.3. the average sulphur content
2.3.1.4. the total volume imported
2.3.1.5. the total CIF price
2.3.1.6. the number of reporting entities.
2.3.2. The following list of aggregates shall be declared for crude oil supply:
2.3.2.1. the volume supplied
2.3.2.2. the weighted average CIF price
2.4. Units of measurement
bbl (barrel) for 2.3.1.4 and 2.3.2.1.
kt (thousand tonnes) for 2.3.2.1.
% (percentage) for 2.3.1.3.
° (degrees) for 2.3.1.2.
$ (US Dollar) per barrel for 2.3.1.5 and 2.3.2.2.
$ (US Dollar) per tonne for 2.3.2.2.
2.5. Applicable provisions
2.5.1. Reported period:
One calendar month.
2.5.2. Frequency:
Monthly.
2.5.3. Deadline for transmission of data:
Within one calendar month following the reported month.
2.5.4. Transmission format:
The transmission format shall conform to the relevant interchange standard specified by Eurostat.
2.5.5. Transmission method:
Data shall be submitted or uploaded by electronic means to the single entry point for data at Eurostat.
3. OIL AND PETROLEUM PRODUCTS
3.1. Applicable energy products
This chapter covers the reporting of:
3.1.1. Crude oil
3.1.2. LPG
3.1.3. Gasoline (which is the sum of motor gasoline and aviation gasoline)
3.1.4. Kerosene (which is the sum of kerosene type jet fuel and other kerosene)
3.1.5. Gas/diesel oil
3.1.6. Fuel oil.
3.1.7. ‘Total oil’ means the sum of all the above listed products except crude oil, and must also include all other petroleum products defined in Annex A (such as refinery gas, ethane, naphtha, petroleum coke, white spirit and SBP, paraffin waxes, bitumen, lubricants and others).
3.2. List of aggregates
The following aggregates shall be declared for all energy products listed in the previous paragraph.
3.2.1. Production for crude oil and refinery output (gross output, including refinery fuel) for all other products listed in section 3.1.
3.2.2. Imports
3.2.3. Exports
3.2.4. Closing stocks
3.2.5. Stock change
A stock build is shown as a positive number and a stock draw is shown as a negative number.
3.2.6. Refinery Intake (Observed refinery throughput) for crude oil and Demand for all other products that are listed in section 3.1.
Demand is defined as deliveries or sales to the inland market (domestic consumption) plus Refinery Fuel plus International Marine and Aviation Bunkers. Demand for Total Oil includes Crude Oil.
3.3. Units of measurement
Reported quantities must be declared in kt (kilo-tonnes).
3.4. Deadline for transmission of data
Within 25 days following the reported month.
(1) NACE Rev. 2 – Statistical Classification of Economic Activities in the European Community, Rev. 2 (2008)
(2) Natural gas liquids.