This document is an excerpt from the EUR-Lex website
Document 02009L0048-20221205
Directive 2009/48/EC of the European Parliament and of the Council of 18 June 2009 on the safety of toys (Text with EEA relevance)Text with EEA relevance
Consolidated text: Directive 2009/48/EC of the European Parliament and of the Council of 18 June 2009 on the safety of toys (Text with EEA relevance)Text with EEA relevance
Directive 2009/48/EC of the European Parliament and of the Council of 18 June 2009 on the safety of toys (Text with EEA relevance)Text with EEA relevance
02009L0048 — EN — 05.12.2022 — 011.001
This text is meant purely as a documentation tool and has no legal effect. The Union's institutions do not assume any liability for its contents. The authentic versions of the relevant acts, including their preambles, are those published in the Official Journal of the European Union and available in EUR-Lex. Those official texts are directly accessible through the links embedded in this document
DIRECTIVE 2009/48/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 18 June 2009 on the safety of toys (OJ L 170 30.6.2009, p. 1) |
Amended by:
|
|
Official Journal |
||
No |
page |
date |
||
L 64 |
7 |
3.3.2012 |
||
L 195 |
16 |
18.7.2013 |
||
L 182 |
49 |
21.6.2014 |
||
L 183 |
49 |
24.6.2014 |
||
L 192 |
49 |
1.7.2014 |
||
L 306 |
17 |
24.11.2015 |
||
L 306 |
20 |
24.11.2015 |
||
L 306 |
23 |
24.11.2015 |
||
L 110 |
6 |
27.4.2017 |
||
L 115 |
47 |
4.5.2017 |
||
L 138 |
128 |
25.5.2017 |
||
L 122 |
29 |
17.5.2018 |
||
L 298 |
5 |
19.11.2019 |
||
L 299 |
51 |
20.11.2019 |
||
L 423 |
53 |
15.12.2020 |
||
L 423 |
58 |
15.12.2020 |
||
L 197 |
110 |
4.6.2021 |
Corrected by:
DIRECTIVE 2009/48/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL
of 18 June 2009
on the safety of toys
(Text with EEA relevance)
CHAPTER I
GENERAL PROVISIONS
Article 1
Subject-matter
This Directive lays down rules on the safety of toys and on their free movement in the Community.
Article 2
Scope
The products listed in Annex I shall not be considered as toys within the meaning of this Directive.
This Directive shall not apply to the following toys:
playground equipment intended for public use;
automatic playing machines, whether coin operated or not, intended for public use;
toy vehicles equipped with combustion engines;
toy steam engines; and
slings and catapults.
Article 3
Definitions
For the purposes of this Directive the following definitions shall apply:
‘making available on the market’ means any supply of a toy for distribution, consumption or use on the Community market in the course of a commercial activity, whether in return for payment or free of charge;
‘placing on the market’ means the first making available of a toy on the Community market;
‘manufacturer’ means any natural or legal person who manufactures a toy or has a toy designed or manufactured, and markets that toy under his name or trademark;
‘authorised representative’ means any natural or legal person established within the Community who has received a written mandate from a manufacturer to act on his behalf in relation to specified tasks;
‘importer’ means any natural or legal person established within the Community who places a toy from a third country on the Community market;
‘distributor’ means any natural or legal person in the supply chain, other than the manufacturer or the importer, who makes a toy available on the market;
‘economic operators’ means the manufacturer, the authorised representative, the importer and the distributor;
‘harmonised standard’ means a standard adopted by one of the European standardisation bodies listed in Annex I to Directive 98/34/EC on the basis of a request made by the Commission in accordance with Article 6 of that Directive;
‘Community harmonisation legislation’ means any Community legislation harmonising the conditions for the marketing of products;
‘accreditation’ shall have the meaning assigned to it by Regulation (EC) No 765/2008;
‘conformity assessment’ means the process demonstrating whether specified requirements relating to a toy have been fulfilled;
‘conformity assessment body’ means a body that performs conformity assessment activities, including calibration, testing, certification and inspection;
‘recall’ means any measure aimed at achieving the return of a toy that has already been made available to the end user;
‘withdrawal’ means any measure aimed at preventing a toy in the supply chain from being made available on the market;
‘market surveillance’ means the activities carried out and measures taken by public authorities to ensure that toys comply with the applicable requirements set out in Community harmonisation legislation and do not endanger health, safety or any other aspect of public interest protection;
‘CE marking’ means a marking by which the manufacturer indicates that the toy is in conformity with the applicable requirements set out in Community harmonisation legislation providing for its affixing;
‘functional product’ means a product which performs and is used in the same way as a product, appliance or installation intended for use by adults, and which may be a scale model of such product, appliance or installation;
‘functional toy’ means a toy which performs and is used in the same way as a product, appliance or installation intended for use by adults, and which may be a scale model of such product, appliance or installation;
‘aquatic toy’ means a toy intended for use in shallow water which is capable of carrying or supporting a child on the water;
‘design speed’ means representative potential operating speed that is determined by the design of the toy;
‘activity toy’ means a toy for domestic use in which the support structure remains stationary while the activity is taking place and which is intended for the performance by a child of any of the following activities: climbing, jumping, swinging, sliding, rocking, spinning, crawling and creeping, or any combination thereof;
‘chemical toy’ means a toy intended for the direct handling of chemical substances and mixtures and which is used in a manner appropriate to a given age-group and under the supervision of an adult;
‘olfactory board game’ means a toy the purpose of which is to assist a child to learn to recognise different odours or flavours;
‘cosmetic kit’ means a toy the purpose of which is to assist a child to learn to make products such as fragrances, soaps, creams, shampoos, bath foams, glosses, lipsticks, other make-up, tooth-paste and conditioners;
‘gustative game’ means a toy the purpose of which is to allow children to make sweets or dishes which involve the use of food ingredients such as sweets, liquids, powders and aromas;
‘harm’ means physical injury or any other damage to health, including long-term health effects;
‘hazard’ means a potential source of harm;
‘risk’ means the probable rate of occurrence of a hazard causing harm and the degree of severity of the harm;
‘intended for use by’ means that a parent or supervisor shall reasonably be able to assume by virtue of the functions, dimensions and characteristics of a toy that it is intended for use by children of the stated age group.
CHAPTER II
OBLIGATIONS OF ECONOMIC OPERATORS
Article 4
Obligations of manufacturers
Where compliance of a toy with the applicable requirements has been demonstrated by that procedure, manufacturers shall draw up an EC declaration of conformity, as referred to in Article 15, and affix the CE marking, as set out in Article 17(1).
When deemed appropriate with regard to the risks presented by a toy, manufacturers shall, to protect the health and safety of consumers, carry out sample testing of marketed toys, investigate, and, if necessary, keep a register of complaints, of non-conforming toys and toy recalls, and shall keep distributors informed of any such monitoring.
Article 5
Authorised representatives
An authorised representative shall perform the tasks specified in the mandate received from the manufacturer. The mandate shall allow the authorised representative to do at least the following:
keep the EC declaration of conformity and the technical documentation at the disposal of national surveillance authorities for a period of 10 years after the toy has been placed on the market;
further to a reasoned request from a competent national authority, provide that authority with all the information and documentation necessary to demonstrate the conformity of a toy;
cooperate with the competent national authorities, at their request, on any action taken to eliminate the risks posed by toys covered by the mandate.
Article 6
Obligations of importers
They shall ensure that the manufacturer has drawn up the technical documentation, that the toy bears the required conformity marking and is accompanied by the required documents, and that the manufacturer has complied with the requirements set out in Article 4(5) and (6).
Where an importer considers or has reason to believe that a toy is not in conformity with the requirements set out in Article 10 and Annex II, it shall not place the toy on the market until the toy has been brought into conformity. Furthermore, where the toy presents a risk, the importer shall inform the manufacturer and the market surveillance authorities to that effect.
Article 7
Obligations of distributors
Where a distributor considers or has reason to believe that a toy is not in conformity with the requirements set out in Article 10 and Annex II, it shall not make the toy available on the market until the toy has been brought into conformity. Furthermore, where the toy presents a risk, the distributor shall inform the manufacturer or the importer, as well as the market surveillance authorities, to that effect.
Article 8
Cases in which obligations of manufacturers apply to importers and distributors
An importer or distributor shall be considered a manufacturer for the purposes of this Directive and be subject to the obligations of the manufacturer under Article 4 where it places a toy on the market under its name or trademark or modifies a toy already placed on the market in such a way that compliance with the applicable requirements may be affected.
Article 9
Identification of economic operators
Economic operators shall, on request, identify the following to the market surveillance authorities:
any economic operator who has supplied them with a toy;
any economic operator to whom they have supplied a toy.
Economic operators shall be able to present the information referred to in the first paragraph for a period of 10 years after the toy has been placed on the market, in the case of the manufacturer, and for a period of 10 years after they have been supplied with the toy, in the case of other economic operators.
CHAPTER III
CONFORMITY OF TOYS
Article 10
Essential safety requirements
The ability of the users and, where appropriate, their supervisors shall be taken into account, in particular, in the case of toys which are intended for use by children under 36 months or by other specified age groups.
Labels affixed in accordance with Article 11(2) and instructions for use which accompany toys shall draw the attention of users or their supervisors to the inherent hazards and risks of harm involved in using the toys, and to the ways of avoiding such hazards and risks.
Article 11
Warnings
As regards the categories of toy listed in Part B of Annex V, the warnings set out therein shall be used. The warnings set out in points 2 to 10 of Part B of Annex V shall be used as worded therein.
Toys shall not bear one or more of the specific warnings set out in Part B of Annex V where that warning conflicts with the intended use of the toy, as determined by virtue of its function, dimension and characteristics.
The warnings shall be preceded by the words ‘Warning’ or ‘Warnings’, as the case may be.
Warnings which determine the decision to purchase the toy, such as those specifying the minimum and maximum ages for users and the other applicable warnings set out in Annex V, shall appear on the consumer packaging or be otherwise clearly visible to the consumer before the purchase, including in cases where the purchase is made on-line.
Article 12
Free movement
Members States shall not impede the making available on the market in their territory of toys which comply with this Directive.
Article 13
Presumption of conformity
Toys which are in conformity with harmonised standards or parts thereof, the references of which have been published in the Official Journal of the European Union, shall be presumed to be in conformity with the requirements covered by those standards or parts thereof set out in Article 10 and Annex II.
Article 14
Formal objection to a harmonised standard
Article 15
EC declaration of conformity
Article 16
General principles of the CE marking
Article 17
Rules and conditions for affixing the CE marking
Where the CE marking is not visible from outside the packaging, if any, it shall as a minimum be affixed to the packaging.
CHAPTER IV
CONFORMITY ASSESSMENT
Article 18
Safety assessments
Manufacturers shall, before placing a toy on the market, carry out an analysis of the chemical, physical, mechanical, electrical, flammability, hygiene and radioactivity hazards that the toy may present, as well as an assessment of the potential exposure to such hazards.
Article 19
Applicable conformity assessment procedures
In the following cases, the toy shall be submitted to EC-type examination, as referred to in Article 20, together with the conformity to type procedure set out in Module C of Annex II to Decision No 768/2008/EC:
where harmonised standards, the reference number of which has been published in the Official Journal of the European Union, covering all relevant safety requirements for the toy, do not exist;
where the harmonised standards referred to in point (a) exist but the manufacturer has not applied them or has applied them only in part;
where one or more of the harmonised standards referred to in point (a) has been published with a restriction;
when the manufacturer considers that the nature, design, construction or purpose of the toy necessitate third party verification.
Article 20
EC-type examination
EC-type examination shall be carried out in the manner specified in the second indent of point 2 of that Module.
In addition to those provisions, the requirements laid down in paragraphs 2 to 5 of this Article shall apply.
The EC-type examination certificate shall be reviewed whenever necessary, in particular in case of a change to the manufacturing process, the raw materials or the components of the toy, and, in any case, every five years.
The EC-type examination certificate shall be withdrawn if the toy fails to comply with the requirements set out in Article 10 and Annex II.
Member States shall ensure that their notified bodies do not grant an EC-type examination certificate for a toy in respect of which a certificate has been refused or withdrawn.
Article 21
Technical documentation
When a market surveillance authority requests the technical documentation or a translation of parts thereof from a manufacturer, it may fix a deadline for receipt of such file or translation, which shall be 30 days, unless a shorter deadline is justified in the case of serious and immediate risk.
CHAPTER V
NOTIFICATION OF CONFORMITY ASSESSMENT BODIES
Article 22
Notification
Member States shall notify the Commission and the other Member States of bodies authorised to carry out third-party conformity assessment tasks under Article 20.
Article 23
Notifying authorities
Article 24
Requirements relating to notifying authorities
Article 25
Information obligation of notifying authorities
Member States shall inform the Commission of their procedures for the assessment and notification of conformity assessment bodies and the monitoring of notified bodies, and of any changes thereto.
The Commission shall make that information publicly available.
Article 26
Requirements relating to notified bodies
A body belonging to a business association or professional federation representing undertakings involved in the design, manufacturing, provision, assembly, use or maintenance of toys which it assesses, may, on condition that its independence and the absence of any conflict of interest are demonstrated, be considered such a body.
A conformity assessment body, its top level management and the personnel responsible for carrying out the conformity assessment tasks shall not be directly involved in the design or manufacture, the marketing, installation, use or maintenance of those toys, or represent the parties engaged in those activities. They shall not engage in any activity that may conflict with their independence of judgement or integrity in relation to conformity assessment activities for which they are notified. This shall in particular apply to consultancy services.
Conformity assessment bodies shall ensure that the activities of their subsidiaries or subcontractors do not affect the confidentiality, objectivity or impartiality of their conformity assessment activities.
At all times and for each conformity assessment procedure and each kind or category of toy in relation to which it has been notified, a conformity assessment body shall have at its disposal the necessary:
personnel with technical knowledge and sufficient and appropriate experience to perform the conformity assessment tasks;
descriptions of procedures in accordance with which conformity assessment is carried out ensuring the transparency and ability of reproduction of those procedures. It shall have appropriate policies and procedures in place that distinguish between tasks it carries out as a notified body and other activities;
procedures for the performance of activities which take due account of the size of an undertaking, the sector in which it operates, its structure, the degree of complexity of the technology of the toy in question and the mass or serial nature of the production process.
A conformity assessment body shall have the means necessary to perform the technical and administrative tasks connected with the conformity assessment activities in an appropriate manner and shall have access to all necessary equipment or facilities.
The personnel responsible for carrying out the conformity assessment activities shall have:
sound technical and vocational training covering all the conformity assessment activities in relation to which the conformity assessment body has been notified;
satisfactory knowledge of the requirements of the assessments they carry out and adequate authority to carry out those assessments;
appropriate knowledge and understanding of the essential requirements, of the applicable harmonised standards and of the relevant Community harmonisation legislation and of its implementing regulations;
the ability to draw up certificates, records and reports demonstrating that assessments have been carried out.
The remuneration of the top level management and assessment personnel of a conformity assessment body shall not depend on the number of assessments carried out or on the results of those assessments.
Article 27
Presumption of conformity
Where a conformity assessment body demonstrates its conformity with the criteria laid down in the relevant harmonised standards or parts thereof, the references of which have been published in the Official Journal of the European Union, it shall be presumed to comply with the requirements set out in Article 26 insofar as the applicable harmonised standards cover those requirements.
Article 28
Formal objection to a harmonised standard
Where a Member State or the Commission has a formal objection to the harmonised standards referred to in Article 27, Article 14 shall apply.
Article 29
Subsidiaries of and subcontracting by notified bodies
Article 30
Application for notification
Article 31
Notification procedure
Only such a body shall be considered a notified body for the purposes of this Directive.
Article 32
Identification numbers and lists of notified bodies
It shall assign a single identification number even where the same body is notified under several Community acts.
The Commission shall ensure that the list is kept up to date.
Article 33
Changes to notifications
Article 34
Challenge to the competence of notified bodies
Article 35
Operational obligations of notified bodies
In so doing, they shall nevertheless respect the degree of rigour and the level of protection required for the compliance of the toy with this Directive.
Article 36
Information obligation of notified bodies
Notified bodies shall inform the notifying authority of the following:
any refusal, restriction, suspension or withdrawal of an EC-type examination certificate;
any circumstances affecting the scope of and conditions for notification;
any request for information which they have received from market surveillance authorities regarding conformity assessment activities;
on request, conformity assessment activities performed within the scope of their notification, and any other activity performed, including cross-border activities and subcontracting.
Article 37
Exchange of experience
The Commission shall provide for the organisation of exchange of experience between the Member States' national authorities responsible for notification policy.
Article 38
Coordination of notified bodies
The Commission shall ensure that appropriate coordination and cooperation between bodies notified under this Directive are put in place and properly operated in the form of a sectoral group or groups of notified bodies.
Member States shall ensure that the bodies notified by them participate in the work of that group or groups, directly or by means of designated representatives.
CHAPTER VI
OBLIGATIONS AND POWERS OF MEMBER STATES
Article 39
Precautionary principle
When competent authorities of the Member States take measures as provided for in this Directive, and in particular those referred to in Article 40, they shall take due account of the precautionary principle.
Article 40
General obligation to organise market surveillance
Member States shall organise and perform surveillance of toys placed on the market in accordance with Articles 15 to 29 of Regulation (EC) No 765/2008. In addition to those Articles, Article 41 of this Directive shall apply.
Article 41
Instructions to the notified body
Article 42
Procedure for dealing with toys presenting a risk at national level
Where, in the course of that evaluation, the market surveillance authorities find that the toy does not comply with the requirements laid down in this Directive, they shall without delay require the relevant economic operator to take appropriate corrective action to bring the toy into compliance with those requirements, to withdraw the toy from the market, or to recall it within a reasonable period, commensurate with the nature of the risk, as they may prescribe.
The market surveillance authorities shall inform the relevant notified body accordingly.
Article 21 of Regulation (EC) No 765/2008 shall apply to the measures referred in the second subparagraph of this paragraph.
They shall inform the Commission and the other Member States, without delay, of those measures.
The information referred to in paragraph 4 shall include all available details, in particular the data necessary for the identification of the non-compliant toy, the origin of the toy, the nature of the alleged non-compliance and the risk involved, the nature and duration of the national measures taken and the arguments put forward by the relevant economic operator. In particular, the market surveillance authorities shall indicate whether the non-compliance is due to either:
failure of the toy to meet requirements relating to the health or safety of persons; or
shortcomings in the harmonised standards referred to in Article 13 conferring a presumption of conformity.
Article 43
Community safeguard procedure
On the basis of the results of that evaluation, the Commission shall decide whether the national measure is justified or not.
The Commission shall address its decision to all Member States and shall immediately communicate it to them and the relevant economic operator or operators.
If the national measure is considered unjustified, the Member State concerned shall withdraw it.
Article 44
Exchange of information — Community Rapid Information Exchange System
If a measure referred to in Article 42(4) is a type of measure which is required under Article 22 of Regulation (EC) No 765/2008 to be notified through the Community Rapid Information Exchange System, it shall not be necessary to make a separate notification under Article 42(4) of this Directive, provided that the following conditions are met:
the Community Rapid Information Exchange notification indicates that the notification of the measure is also required by this Directive;
the supporting evidence referred to in Article 42(5) is enclosed with the Community Rapid Information Exchange notification.
Article 45
Formal non-compliance
Without prejudice to Article 42, where a Member State makes one of the following findings, it shall require the relevant economic operator to put an end to the non-compliance concerned:
that the CE marking has been affixed in violation of Article 16 or 17;
that the CE marking has not been affixed;
that the EC declaration of conformity has not been drawn up;
that the EC declaration of conformity has not been drawn up correctly;
that technical documentation is either not available or not complete.
CHAPTER VII
COMMITTEE PROCEDURES
Article 46
Amendments and implementing measures
The Commission may, for the purposes of adapting them to technical and scientific developments, amend the following:
Annex I;
points 11 and 13 of Part III of Annex II;
Annex V.
Those measures, designed to amend non-essential elements of this Directive, shall be adopted in accordance with the regulatory procedure with scrutiny referred to in Article 47(2).
Article 47
Committee procedure
CHAPTER VIII
SPECIFIC ADMINISTRATIVE PROVISIONS
Article 48
Reporting
By 20 July 2014 and every five years thereafter, Member States shall send the Commission a report on the application of this Directive.
That report shall contain an evaluation of the situation concerning the safety of toys and of the effectiveness of this Directive, as well as a presentation of the market surveillance activities performed by that Member State.
The Commission shall draw up and publish a summary of the national reports.
Article 49
Transparency and confidentiality
When the competent authorities of the Member States and the Commission adopt measures under this Directive, the requirements of transparency and confidentiality provided for in Article 16 of Directive 2001/95/EC shall apply.
Article 50
Motivation of measures
Any measure taken pursuant to this Directive to prohibit or restrict the placing on the market of a toy, to withdraw a toy or to recall a toy from the market shall state the exact grounds on which it is based.
Such a measure shall be notified without delay to the party concerned, which shall at the same time be informed of the remedies available to it under the laws in force in the Member State in question and of the time limits applicable to them.
Article 51
Penalties
Member States shall lay down rules on penalties for economic operators, which may include criminal sanctions for serious infringements, applicable to infringements of the national provisions adopted pursuant to this Directive, and shall take all measures necessary to ensure that they are implemented.
The penalties provided for shall be effective, proportionate and dissuasive and may be increased if the relevant economic operator has previously committed a similar infringement of this Directive.
The Member States shall notify the Commission of those rules by 20 July 2011, and shall notify it without delay of any subsequent amendment to them.
CHAPTER IX
FINAL AND TRANSITIONAL PROVISIONS
Article 52
Application of Directives 85/374/EEC and 2001/95/EC
Article 53
Transitional periods
Article 54
Transposition
Member States shall bring into force the laws, regulations and administrative provisions necessary to comply with this Directive by 20 January 2011. They shall forthwith inform the Commission thereof.
They shall apply those measures with effect from 20 July 2011.
When Member States adopt those measures, they shall contain a reference to this Directive or shall be accompanied by such a reference on the occasion of their official publication. The methods of making such reference shall be laid down by Member States.
Member States shall communicate to the Commission the provisions of national law which they adopt in the field covered by this Directive.
Article 55
Repeal
Directive 88/378/EEC, except Article 2(1) and Section 3 of Part II of Annex II, is repealed with effect from 20 July 2011. Article 2(1) thereof and Section 3 of Part II of Annex II thereto are repealed with effect from 20 July 2013.
References to the repealed Directive shall be construed as references to this Directive.
Article 56
Entry into force
This Directive shall enter into force on the 20th day following its publication in the Official Journal of the European Union.
Article 57
Addressees
This Directive is addressed to the Member States.
ANNEX I
List of products that, in particular, are not considered as toys within the meaning of this Directive
(as referred to in Article 2(1))
Decorative objects for festivities and celebrations
Products for collectors, provided that the product or its packaging bears a visible and legible indication that it is intended for collectors of 14 years of age and above. Examples of this category are:
detailed and faithful scale models;
kits for the assembly of detailed scale models;
folk dolls and decorative dolls and other similar articles;
historical replicas of toys; and
reproductions of real fire arms.
Sports equipment, including roller skates, inline skates, and skateboards intended for children with a body mass of more than 20 kg
Bicycles with a maximum saddle height of more than 435 mm, measured as the vertical distance from the ground to the top of the seat surface, with the seat in a horizontal position and with the seat pillar set to the minimum insertion mark
Scooters and other means of transport designed for sport or which are intended to be used for travel on public roads or public pathways
Electrically driven vehicles which are intended to be used for travel on public roads, public pathways, or the pavement thereof
Aquatic equipment intended to be used in deep water, and swimming learning devices for children, such as swim seats and swimming aids
Puzzles with more than 500 pieces
Guns and pistols using compressed gas, with the exception of water guns and water pistols, and bows for archery over 120 cm long
Fireworks, including percussion caps which are not specifically designed for toys
Products and games using sharp-pointed missiles, such as sets of darts with metallic points
Functional educational products, such as electric ovens, irons or other functional products operated at a nominal voltage exceeding 24 volts which are sold exclusively for teaching purposes under adult supervision
Products intended for use for educational purposes in schools and other pedagogical contexts under the surveillance of an adult instructor, such as science equipment
Electronic equipment, such as personal computers and game consoles, used to access interactive software and their associated peripherals, unless the electronic equipment or the associated peripherals are specifically designed for and targeted at children and have a play value on their own, such as specially designed personal computers, key boards, joy sticks or steering wheels
Interactive software, intended for leisure and entertainment, such as computer games, and their storage media, such as CDs
Babies’ soothers
Child-appealing luminaires
Electrical transformers for toys
Fashion accessories for children which are not for use in play
ANNEX II
PARTICULAR SAFETY REQUIREMENTS
I. Physical and Mechanical Properties
1. Toys and their parts and, in the case of fixed toys, their anchorages, must have the requisite mechanical strength and, where appropriate, stability to withstand the stresses to which they are subjected during use without breaking or becoming liable to distortion at the risk of causing physical injury.
2. Accessible edges, protrusions, cords, cables and fastenings on toys must be designed and manufactured in such a way that the risks of physical injury from contact with them are reduced as far as possible.
3. Toys must be designed and manufactured in such a way as not to present any risk or only the minimum risk inherent to their use which could be caused by the movement of their parts.
4.
Toys and their parts must not present a risk of strangulation.
Toys and their parts must not present a risk of asphyxiation by closing off the flow of air as a result of airway obstruction external to the mouth and nose.
Toys and their parts must be of such dimensions as to not present a risk of asphyxiation by closing off the flow of air as a result of internal airway obstruction by objects wedged in the mouth or pharynx or lodged over the entrance to the lower airways.
Toys, which are clearly intended for use by children under 36 months, and their component parts and any of their detachable parts must be of such dimensions as to prevent their being swallowed or inhaled. This also applies to other toys which are intended to be put in the mouth, and to their component parts and any of their detachable parts.
The packaging in which toys are contained for retail sale must not present a risk of strangulation or asphyxiation caused by airway obstruction external to the mouth and nose.
Toys contained within food or co-mingled with food must have their own packaging. This packaging, as it is supplied, must be of such dimensions as to prevent its being swallowed and/or inhaled.
Toy packaging, as referred to in points (e) and (f), which is spherical, egg-shaped or ellipsoidal, and any detachable parts of this or of cylindrical toy packaging with rounded ends, must be of such dimensions as to prevent it from causing airway obstruction by being wedged in the mouth or pharynx or lodged over the entrance to the lower airways.
Toys firmly attached to a food product at the moment of consumption, in such a way that the food product needs to be consumed in order to get direct access to the toy, shall be prohibited. Parts of toys otherwise directly attached to a food product shall fulfil the requirements set out in points (c) and (d).
5. Aquatic toys must be designed and manufactured so as to reduce as far as possible, taking into account the recommended use of the toy, any risk of loss of buoyancy of the toy and loss of support afforded to the child.
6. Toys which it is possible to get inside and which thereby constitute an enclosed space for occupants must have a means of exit which the intended user can open easily from the inside.
7. Toys conferring mobility on their users must, as far as possible, incorporate a braking system which is suited to the type of toy and is commensurate with the kinetic energy generated by it. Such a system must be easy for the user to operate without risk of ejection or physical injury for the user or for third parties.
The maximum design speed of electrically driven ride-on toys must be limited so as to minimise the risk of injury.
8. The form and composition of projectiles and the kinetic energy they may generate when fired from a toy designed for that purpose must be such that, taking into account the nature of the toy, there is no risk of physical injury to the user or to third parties.
9. Toys must be manufactured so as to ensure that:
the maximum and minimum temperature of any accessible surfaces does not cause injury when touched; and
liquids and gases contained within the toy do not reach temperatures or pressures which are such that their escape from the toy, other than for reasons essential to the proper functioning of the toy, might cause burns, scalds or other physical injury.
10. Toys which are designed to emit a sound shall be designed and manufactured in such a way in terms of the maximum values for impulse noise and continuous noise that the sound from them is not able to impair children’s hearing.
11. Activity toys shall be manufactured so as to reduce the risk of crushing or trapping of body parts or trapping of clothing and of falls, impacts and drowning as far as possible. In particular, any surface of such a toy accessible for one or more children to play on shall be designed to bear their load.
II. Flammability
1. Toys must not constitute a dangerous flammable element in the child’s environment. They must therefore be composed of materials which fulfil one or more of the following conditions:
they do not burn if directly exposed to a flame or spark or other potential source of fire;
they are not readily flammable (the flame goes out as soon as the fire cause disappears);
if they do ignite, they burn slowly and present a low rate of spread of the flame;
irrespective of the toy’s chemical composition, they are designed so as to mechanically delay the combustion process.
Such combustible materials must not constitute a risk of ignition for other materials used in the toy.
2. Toys which, for reasons essential to their functioning, contain substances or mixtures that meet the classification criteria laid down in Section 1 of Appendix B, in particular materials and equipment for chemistry experiments, model assembly, plastic or ceramic moulding, enamelling, photography or similar activities, must not contain, as such, substances or mixtures which may become flammable due to the loss of non-flammable volatile components.
3. Toys other than toy percussion caps must not be explosive or contain elements or substances likely to explode when used as specified in the first subparagraph of Article 10(2).
4. Toys and, in particular, chemical games and toys, must not contain as such substances or mixtures:
which, when mixed together, may explode through chemical reaction or through heating;
which may explode when mixed with oxidizing substances; or
which contain volatile components which are flammable in air and liable to form a flammable or explosive vapour/air mixture.
III. Chemical Properties
1. Toys shall be designed and manufactured in such a way that there are no risks of adverse effects on human health due to exposure to the chemical substances or mixtures of which the toys are composed or which they contain when the toys are used as specified in the first subparagraph of Article 10(2).
Toys shall comply with the relevant Community legislation relating to certain categories of products or to restrictions for certain substances and mixtures.
2. Toys that are themselves substances or mixtures must comply also with Council Directive 67/548/EEC of 27 June 1967 on the approximation of laws, regulations and administrative provisions relating to the classification, packaging and labelling of dangerous substances ( 1 ), Directive 1999/45/EC of the European Parliament and of the Council of 31 May 1999 concerning the approximation of the laws, regulations and administrative provisions of the Member States relating to the classification, packaging and labelling of dangerous preparations ( 2 ) and Regulation (EC) No 1272/2008 of the European Parliament and of the Council of 16 December 2008 on classification, labelling and packaging of substances and mixtures ( 3 ), as applicable, relating to the classification, packaging and labelling of certain substances and mixtures.
3. Without prejudice to the restrictions referred to in the second paragraph of point 1, substances that are classified as carcinogenic, mutagenic or toxic for reproduction (CMR) of category 1A, 1B or 2 under Regulation (EC) No 1272/2008 shall not be used in toys, in components of toys or in micro-structurally distinct parts of toys.
4. By way of derogation from point 3, substances or mixtures classified as CMR of the categories laid down in Section 3 of Appendix B may be used in toys, in components of toys or micro-structurally distinct parts of toys provided that one or more of the following conditions is met:
these substances and mixtures are contained in individual concentrations equal to or smaller than the relevant concentrations established in the Community legal acts referred to in Section 2 of Appendix B for the classification of mixtures containing these substances;
these substances and mixtures are inaccessible to children in any form, including inhalation, when the toy is used as specified in the first subparagraph of Article 10(2);
a decision in accordance with Article 46(3) has been taken to permit the substance or mixture and its use, and the substance or mixture and its permitted uses have been listed in Appendix A.
That decision may be taken if the following conditions are met:
the use of the substance or mixture has been evaluated by the relevant Scientific Committee and found to be safe, in particular in view of exposure;
there are no suitable alternative substances or mixtures available, as documented in an analysis of alternatives; and
the substance or mixture is not prohibited for use in consumer articles under Regulation (EC) No 1907/2006.
The Commission shall mandate the relevant Scientific Committee to re-evaluate those substances or mixtures as soon as safety concerns arise and at the latest every five years from the date that a decision in accordance with Article 46(3) was taken.
5. By way of derogation from point 3, substances or mixtures classified as CMR of the categories laid down in Section 4 of Appendix B may be used in toys, in components of toys or micro-structurally distinct parts of toys provided that one of the following conditions is met:
these substances and mixtures are contained in individual concentrations equal to or smaller than the relevant concentrations established in the Community legal acts referred to in Section 2 of Appendix B for the classification of mixtures containing these substances;
these substances and mixtures are inaccessible to children in any form, including inhalation, when the toy is used as specified in the first subparagraph of Article 10(2); or
a decision in accordance with Article 46(3) has been taken to permit the substance or mixture and its use, and the substance or mixture and its permitted uses have been listed in Appendix A.
That decision may be taken if the following conditions are met:
the use of the substance or mixture has been evaluated by the relevant Scientific Committee and found to be safe, in particular in view of exposure; and
the substance or mixture is not prohibited for use in consumer articles under Regulation (EC) No 1907/2006.
The Commission shall mandate the relevant Scientific Committee to re-evaluate those substances or mixtures as soon as safety concerns arise and at the latest every five years from the date that a decision in accordance with Article 46(3) was taken.
6. Points 3, 4 and 5 shall not apply to nickel in stainless steel.
7. Points 3, 4 and 5 shall not apply to materials that comply with the specific limit values set out in Appendix C, or, until such provisions have been laid down, but not later than 20 July 2017, to materials covered by and complying with the provisions for food contact materials set out in Regulation (EC) No 1935/2004 and the related specific measures for particular materials.
8. Without prejudice to the application of points 3 and 4, nitrosamines and nitrosable substances shall be prohibited for use in toys intended for use by children under 36 months or in other toys intended to be placed in the mouth if the migration of the substances is equal to or higher than 0,05 mg/kg for nitrosamines and 1 mg/kg for nitrosable substances.
9. The Commission shall systematically and regularly evaluate the occurrence of hazardous substances of materials in toys. These evaluations shall take into account reports of market surveillance bodies and concerns expressed by Member States and stakeholders.
10. Cosmetic toys, such as play cosmetics for dolls, shall comply with the compositional and labelling requirements laid down in Council Directive 76/768/EEC of 27 July 1976 on the approximation of the laws of the Member States relating to cosmetic products ( 4 ).
11. Toys shall not contain the following allergenic fragrances:
No |
Name of the allergenic fragrance |
CAS number |
(1) |
Alanroot oil (Inula helenium) |
97676-35-2 |
(2) |
Allylisothiocyanate |
57-06-7 |
(3) |
Benzyl cyanide |
140-29-4 |
(4) |
4 tert-Butylphenol |
98-54-4 |
(5) |
Chenopodium oil |
8006-99-3 |
(6) |
Cyclamen alcohol |
4756-19-8 |
(7) |
Diethyl maleate |
141-05-9 |
(8) |
Dihydrocoumarin |
119-84-6 |
(9) |
2,4-Dihydroxy-3-methylbenzaldehyde |
6248-20-0 |
(10) |
3,7-Dimethyl-2-octen-1-ol (6,7-Dihydrogeraniol) |
40607-48-5 |
(11) |
4,6-Dimethyl-8-tert-butylcoumarin |
17874-34-9 |
(12) |
Dimethyl citraconate |
617-54-9 |
(13) |
7,11-Dimethyl-4.6,10-dodecatrien-3-one |
26651-96-7 |
(14) |
6,10-Dimethyl-3.5,9-undecatrien-2-one |
141-10-6 |
(15) |
Diphenylamine |
122-39-4 |
(16) |
Ethyl acrylate |
140-88-5 |
(17) |
Fig leaf, fresh and preparations |
68916-52-9 |
(18) |
trans-2-Heptenal |
18829-55-5 |
(19) |
trans-2-Hexenal diethyl acetal |
67746-30-9 |
(20) |
trans-2-Hexenal dimethyl acetal |
18318-83-7 |
(21) |
Hydroabietyl alcohol |
13393-93-6 |
(22) |
4-Ethoxy-phenol |
622-62-8 |
(23) |
6-lsopropyl-2-decahydronaphthalenol |
34131-99-2 |
(24) |
7-Methoxycoumarin |
531-59-9 |
(25) |
4-Methoxyphenol |
150-76-5 |
(26) |
4-(p-Methoxyphenyl)-3-butene-2-one |
943-88-4 |
(27) |
1-(p-Methoxyphenyl)-1-penten-3-one |
104-27-8 |
(28) |
Methyl trans-2-butenoate |
623-43-8 |
(29) |
6-Methylcoumarin |
92-48-8 |
(30) |
7-Methylcoumarin |
2445-83-2 |
(31) |
5-Methyl-2,3-hexanedione |
13706-86-0 |
(32) |
Costus root oil (Saussurea lappa Clarke) |
8023-88-9 |
(33) |
7-Ethoxy-4-methylcoumarin |
87-05-8 |
(34) |
Hexahydrocoumarin |
700-82-3 |
(35) |
Peru balsam, crude (Exudation of Myroxylon pereirae (Royle) Klotzsch) |
8007-00-9 |
(36) |
2-Pentylidene-cyclohexanone |
25677-40-1 |
(37) |
3.6,10-Trimethyl-3.5,9-undecatrien-2-one |
1117-41-5 |
(38) |
Verbena oil (Lippia citriodora Kunth) |
8024-12-2 |
(39) |
Musk ambrette (4-tert-Butyl-3-methoxy-2,6-dinitrotoluene) |
83-66-9 |
(40) |
4-Phenyl-3-buten-2-one |
122-57-6 |
(41) |
Amyl cinnamal |
122-40-7 |
(42) |
Amylcinnamyl alcohol |
101-85-9 |
(43) |
Benzyl alcohol |
100-51-6 |
(44) |
Benzyl salicylate |
118-58-1 |
(45) |
Cinnamyl alcohol |
104-54-1 |
(46) |
Cinnamal |
104-55-2 |
(47) |
Citral |
5392-40-5 |
(48) |
Coumarin |
91-64-5 |
(49) |
Eugenol |
97-53-0 |
(50) |
Geraniol |
106-24-1 |
(51) |
Hydroxy-citronellal |
107-75-5 |
(52) |
Hydroxy-methylpentylcyclohexenecarboxaldehyde |
31906-04-4 |
(53) |
Isoeugenol |
97-54-1 |
(54) |
Oakmoss extracts |
90028-68-5 |
(55) |
Treemoss extracts |
90028-67-4 |
(56) |
Atranol (2,6-Dihydroxy-4-methyl-benzaldehyde) |
526-37-4 |
(57) |
Chloroatranol (3-Chloro-2,6-Dihydroxy-4-methyl-benzaldehyde) |
57074-21-2 |
(58) |
Methyl heptine carbonate |
111-12-6 |
However, the presence of traces of these fragrances shall be allowed provided that such presence is technically unavoidable under good manufacturing practice and does not exceed 100 mg/kg.
In addition, the names of the following allergenic fragrances shall be listed on the toy, on an affixed label, on the packaging or in an accompanying leaflet, if added to a toy, as such, at concentrations exceeding 100 mg/kg in the toy or components thereof:
No |
Name of the allergenic fragrance |
CAS number |
(1) |
Anisyl alcohol |
105-13-5 |
(2) |
Benzyl benzoate |
120-51-4 |
(3) |
Benzyl cinnamate |
103-41-3 |
(4) |
Citronellol |
106-22-9; 1117-61-9; 7540-51-4 |
(5) |
Farnesol |
4602-84-0 |
(6) |
Hexyl cinnamaldehyde |
101-86-0 |
(7) |
Lilial |
80-54-6 |
(8) |
d-Limonene |
5989-27-5 |
(9) |
Linalool |
78-70-6 |
▼M16 ————— |
||
(11) |
3-methyl-4-(2.6,6-trimethyl-2-cyclohexen-1-yl)-3-buten-2-one |
127-51-5 |
(12) |
Acetylcedrene |
32388-55-9 |
(13) |
Amyl salicylate |
2050-08-0 |
(14) |
trans-Anethole |
4180-23-8 |
(15) |
Benzaldehyde |
100-52-7 |
(16) |
Camphor |
76-22-2; 464-49-3 |
(17) |
Carvone |
99-49-0; 6485-40-1; 2244-16-8 |
(18) |
beta-Caryophyllene (ox.) |
87-44-5 |
(19) |
Rose ketone-4 (Damascenone) |
23696-85-7 |
(20) |
alpha-Damascone (TMCHB) |
43052-87-5; 23726-94-5 |
(21) |
cis-beta-Damascone |
23726-92-3 |
(22) |
delta-Damascone |
57378-68-4 |
(23) |
Dimethylbenzyl carbinyl acetate (DMBCA) |
151-05-3 |
(24) |
Hexadecanolactone |
109-29-5 |
(25) |
Hexamethylindanopyran |
1222-05-5 |
(26) |
(DL)-Limonene |
138-86-3 |
(27) |
Linalyl acetate |
115-95-7 |
(28) |
Menthol |
1490-04-6; 89-78-1; 2216-51-5 |
(29) |
Methyl salicylate |
119-36-8 |
(30) |
3-methyl-5-(2,2,3-trimethyl-3-cyclopenten-1-yl)pent-4-en-2-ol |
67801-20-1 |
(31) |
alpha-Pinene |
80-56-8 |
(32) |
beta-Pinene |
127-91-3 |
(33) |
Propylidene phthalide |
17369-59-4 |
(34) |
Salicylaldehyde |
90-02-8 |
(35) |
alpha-Santalol |
115-71-9 |
(36) |
beta-Santalol |
77-42-9 |
(37) |
Sclareol |
515-03-7 |
(38) |
alpha-Terpineol |
10482-56-1; 98-55-5 |
(39) |
Terpineol (mixture of isomers) |
8000-41-7 |
(40) |
Terpinolene |
586-62-9 |
(41) |
Tetramethyl acetyloctahydro naphthalenes |
54464-57-2; 54464-59-4; 68155-66-8; 68155-67-9 |
(42) |
Trimethyl benzenepropanol (Majantol) |
103694-68-4 |
(43) |
Vanillin |
121-33-5 |
(44) |
Cananga odorata and Ylang-ylang oil |
83863-30-3; 8006-81-3 |
(45) |
Cedrus atlantica bark oil |
92201-55-3; 8000-27-9 |
(46) |
Cinnamomum cassia leaf oil |
8007-80-5 |
(47) |
Cinnamomum zeylanicum bark oil |
84649-98-9 |
(48) |
Citrus aurantium amara flower oil |
8016-38-4 |
(49) |
Citrus aurantium amara peel oil |
72968-50-4 |
(50) |
Citrus bergamia peel oil expressed |
89957-91-5 |
(51) |
Citrus limonum peel oil expressed |
84929-31-7 |
(52) |
Citrus sinensis (syn.: Aurantium dulcis) peel oil expressed |
97766-30-8; 8028-48-6 |
(53) |
Cymbopogon citratus/schoenanthus oils |
89998-14-1; 8007-02-01; 89998-16-3 |
(54) |
Eucalyptus spp. leaf oil |
92502-70-0; 8000-48-4 |
(55) |
Eugenia caryophyllus leaf/flower oil |
8000-34-8 |
(56) |
Jasminum grandiflorum/officinale |
84776-64-7; 90045-94-6; 8022-96-6 |
(57) |
Juniperus virginiana |
8000-27-9; 85085-41-2 |
(58) |
Laurus nobilis fruit oil |
8007-48-5 |
(59) |
Laurus nobilis leaf oil |
8002-41-3 |
(60) |
Laurus nobilis seed oil |
84603-73-6 |
(61) |
Lavandula hybrida |
91722-69-9 |
(62) |
Lavandula officinalis |
84776-65-8 |
(63) |
Mentha piperita |
8006-90-4; 84082-70-2 |
(64) |
Mentha spicata |
84696-51-5 |
(65) |
Narcissus spp. |
Diverse, including 90064-25-8 |
(66) |
Pelargonium graveolens |
90082-51-2; 8000-46-2 |
(67) |
Pinus mugo |
90082-72-7 |
(68) |
Pinus pumila |
97676-05-6 |
(69) |
Pogostemon cablin |
8014-09-3; 84238-39-1 |
(70) |
Rose flower oil (Rosa spp.) |
Diverse, including 8007-01-0, 93334-48-6, 84696-47-9, 84604-12-6, 90106-38-0, 84604-13-7, 92347-25-6 |
(71) |
Santalum album |
84787-70-2; 8006-87-9 |
(72) |
Turpentine (oil) |
8006-64-2; 9005-90-7; 8052-14-0 |
12. The use of the fragrances set out in points 41 to 55 of the list set out in the first paragraph of point 11 and of the fragrances set out in points 1 to 11 of the list set out in the third paragraph of that point shall be allowed in olfactory board games, cosmetic kits and gustative games, provided that:
those fragrances are clearly labelled on the packaging, and the packaging contains the warning set out in point 10 of Part B of Annex V;
if applicable, the resulting products made by the child in accordance with the instructions comply with the requirements of Directive 76/768/EEC; and
if applicable, those fragrances comply with the relevant legislation on food.
Such olfactory board games, cosmetic kits and gustative games shall not be used by children under 36 months and shall comply with point 1 of Part B of Annex V.
13. Without prejudice to points 3, 4 and 5, the following migration limits, from toys or components of toys, shall not be exceeded:
Element |
mg/kg in dry, brittle, powder-like or pliable toy material |
mg/kg in liquid or sticky toy material |
mg/kg in scraped-off toy material |
Aluminium |
2 250 |
560 |
28 130 |
Antimony |
45 |
11,3 |
560 |
Arsenic |
3,8 |
0,9 |
47 |
Barium |
1 500 |
375 |
18 750 |
Boron |
1 200 |
300 |
15 000 |
Cadmium |
1,3 |
0,3 |
17 |
Chromium (III) |
37,5 |
9,4 |
460 |
Chromium (VI) |
0,02 |
0,005 |
0,053 |
Cobalt |
10,5 |
2,6 |
130 |
Copper |
622,5 |
156 |
7 700 |
Lead |
2,0 |
0,5 |
23 |
Manganese |
1 200 |
300 |
15 000 |
Mercury |
7,5 |
1,9 |
94 |
Nickel |
75 |
18,8 |
930 |
Selenium |
37,5 |
9,4 |
460 |
Strontium |
4 500 |
1 125 |
56 000 |
Tin |
15 000 |
3 750 |
180 000 |
Organic tin |
0,9 |
0,2 |
12 |
Zinc |
3 750 |
938 |
46 000 |
These limit values shall not apply to toys or components of toys which, due to their accessibility, function, volume or mass, clearly exclude any hazard due to sucking, licking, swallowing or prolonged contact with skin when used as specified in the first subparagraph of Article 10(2).
IV. Electrical Properties
1. Toys shall not be powered by electricity of a nominal voltage exceeding 24 volts direct current (DC) or the equivalent alternating current (AC) voltage, and their accessible parts shall not exceed 24 volts DC or the equivalent AC voltage.
Internal voltages shall not exceed 24 volts DC or the equivalent AC voltage unless it is ensured that the voltage and the current combination generated do not lead to any risk or harmful electric shock, even when the toy is broken.
2. Parts of toys which are connected to, or liable to come into contact with, a source of electricity capable of causing electric shock, together with the cables or other conductors through which electricity is conveyed to such parts, must be properly insulated and mechanically protected so as to prevent the risk of such shock.
3. Electric toys must be designed and manufactured in such a way as to ensure that the maximum temperatures reached by all directly accessible surfaces are not such as to cause burns when touched.
4. Under foreseeable fault conditions, toys must provide protection against electrical hazards arising from an electrical power source.
5. Electric toys must provide adequate protection against fire hazards.
6. Electric toys must be designed and manufactured in such a way that electric, magnetic and electromagnetic fields and other radiations generated by the equipment are limited to the extent necessary for the operation of the toy, and must operate at a safe level in compliance with the generally acknowledged state of the art, taking account of specific Community measures.
7. Toys which have an electronic control system must be designed and manufactured in such a way that the toy operates safely even when the electronic system starts malfunctioning or fails due to failure of the system itself or an outside factor.
8. Toys must be designed and manufactured in such a way that they do not present any health hazards or risk of injury to eyes or skin from lasers, light-emitting diodes (LEDs) or any other type of radiation.
9. The electrical transformer of a toy shall not be an integral part of the toy.
V. Hygiene
1. Toys must be designed and manufactured in such a way as to meet hygiene and cleanliness requirements in order to avoid any risk of infection, sickness or contamination.
2. A toy intended for use by children under 36 months must be designed and manufactured in such a way that it can be cleaned. A textile toy shall, to this end, be washable, except if it contains a mechanism that may be damaged if soak washed. The toy shall fulfil the safety requirements also after having been cleaned in accordance with this point and the manufacturer’s instructions.
VI. Radioactivity
Toys shall comply with all relevant measures adopted under Chapter III of the Treaty establishing the European Atomic Community.
Appendix A
List of CMR substances and their permitted uses in accordance with points 4, 5 and 6 of Part III
Substance |
Classification |
Permitted use |
Nickel |
CMR 2 |
In toys and toy components made of stainless steel. In toy components which are intended to conduct an electric current. |
Appendix B
CLASSIFICATION OF SUBSTANCES AND MIXTURES
As a result of the timing of the application of Regulation (EC) No 1272/2008, there are equivalent ways of referring to a given classification that should be used at different points in time.
1. Criteria for classifying substances and mixtures for the purposes of point 2 of Part II
A. Criteria to be applied from 20 July 2011 until 31 May 2015:
Substances
The substance fulfils the criteria for any of the following hazard classes or categories set out in Annex I to Regulation (EC) No 1272/2008:
hazard classes 2.1 to 2.4, 2.6 and 2.7, 2.8 types A and B, 2.9, 2.10, 2.12, 2.13 categories 1 and 2, 2.14 categories 1 and 2, 2.15 types A to F;
hazard classes 3.1 to 3.6, 3.7 adverse effects on sexual function and fertility or on development, 3.8 effects other than narcotic effects, 3.9 and 3.10;
hazard class 4.1;
hazard class 5.1.
Mixtures
The mixture is dangerous within the meaning of Directive 67/548/EEC.
B. Criteria to be applied from 1 June 2015:
The substance or mixture fulfils the criteria for any of the following hazard classes or categories set out in Annex I to Regulation (EC) No 1272/2008:
hazard classes 2.1 to 2.4, 2.6 and 2.7, 2.8 types A and B, 2.9, 2.10, 2.12, 2.13 categories 1 and 2, 2.14 categories 1 and 2, 2.15 types A to F;
hazard classes 3.1 to 3.6, 3.7 adverse effects on sexual function and fertility or on development, 3.8 effects other than narcotic effects, 3.9 and 3.10;
hazard class 4.1;
hazard class 5.1.
2. Community legal acts governing the use of certain substances for the purposes of points 4(a) and 5(a) of Part III
From 20 July 2011 until 31 May 2015, the relevant concentrations for the classification of mixtures containing the substances shall be those established in accordance with Directive 1999/45/EC.
From 1 June 2015, the relevant concentrations for the classification of mixtures containing the substances shall be those established in accordance with Regulation (EC) No 1272/2008.
3. Categories of substances and mixtures classified as carcinogenic, mutagenic or toxic for reproduction (CMR) for the purposes of point 4 of Part III
Substances
Point 4 of Part III concerns substances classified as CMR category 1A and 1B under Regulation (EC) No 1272/2008.
Mixtures
From 20 July 2011 until 31 May 2015, point 4 of Part III concerns mixtures classified as CMR category 1 and 2 under Directive 1999/45/EC and Directive 67/548/EEC as applicable.
From 1 June 2015, point 4 of Part III concerns mixtures classified as CMR category 1A and 1B under Regulation (EC) No 1272/2008.
4. Categories of substances and mixtures classified as carcinogenic, mutagenic or toxic for reproduction (CMR) for the purposes of point 5 of Part III
Substances
Point 5 of Part III concerns substances classified as CMR category 2 under Regulation (EC) No 1272/2008.
Mixtures
From 20 July 2011 until 31 May 2015, point 5 of Part III concerns mixtures classified as CMR category 3 under Directive 1999/45/EC and Directive 67/548/EEC as applicable.
From 1 June 2015, point 5 of Part III concerns mixtures classified as CMR category 2 under Regulation (EC) No 1272/2008.
5. Categories of substances and mixtures classified as carcinogenic, mutagenic or toxic for reproduction (CMR) for the purposes of Article 46(3)
Substances
Article 46(3) concerns substances classified as CMR category 1A, 1B and 2 under Regulation (EC) No 1272/2008.
Mixtures
From 20 July 2011 until 31 May 2015, Article 46(3) concerns mixtures classified as CMR category 1, 21999 and 3 under Directive 1999/45/EC and Directive 67/548/EEC as applicable.
From 1 June 2015, Article 46(3) concerns mixtures classified as CMR category 1A, 1B and 2 under Regulation (EC) No 1272/2008.
Appendix C
Specific limit values for chemicals used in toys intended for use by children under 36 months or in other toys intended to be placed in the mouth adopted in accordance with Article 46(2)
Substance |
CAS No |
Limit value |
TCEP |
115-96-8 |
5 mg/kg (content limit) |
TCPP |
13674-84-5 |
5 mg/kg (content limit) |
TDCP |
13674-87-8 |
5 mg/kg (content limit) |
Bisphenol A |
80-05-7 |
0,04 mg/l (migration limit) in accordance with the methods laid down in EN 71-10:2005 and EN 71-11:2005 |
Formamide |
75-12-7 |
20 μg/m3 (emission limit) after a maximum of 28 days from commencement of the emission testing of foam toy materials containing more than 200 mg/kg (cut-off limit based on content) |
1,2-benzisothiazol-3(2H)-one |
2634-33-5 |
5 mg/kg (content limit) in aqueous toy materials, in accordance with the methods laid down in EN 71-10:2005 and EN 71-11:2005 |
Reaction mass of: 5-chloro-2- methyl-4-isothiazolin-3-one [EC no. 247-500-7] and 2-methyl-2H -isothiazol-3-one [EC no. 220-239-6] (3:1) |
55965-84-9 |
1 mg/kg (content limit) in aqueous toy materials |
5-Chloro-2-methyl-isothiazolin-3(2H)-one |
26172-55-4 |
0,75 mg/kg (content limit) in aqueous toy materials |
2-methylisothiazolin-3(2H)-one |
2682-20-4 |
0,25 mg/kg (content limit) in aqueous toy materials |
Phenol |
108-95-2 |
5 mg/l (migration limit) in polymeric materials in accordance with the methods laid down in EN 71-10:2005 and EN 71-11:2005. 10 mg/kg (content limit) as a preservative in accordance with the methods laid down in EN 71-10:2005 and EN 71-11:2005. |
Formaldehyde |
50-00-0 |
1,5 mg/l (migration limit) in polymeric toy material 0,1 ml/m3 (emission limit) in resin-bonded wood toy material 30 mg/kg (content limit) in textile toy material 30 mg/kg (content limit) in leather toy material 30 mg/kg (content limit) in paper toy material 10 mg/kg (content limit) in water-based toy material |
Aniline |
62-53-3 |
30 mg/kg after reductive cleavage in textile toy material and leather toy material 10 mg/kg as free aniline in finger paints 30 mg/kg after reductive cleavage in finger paints |
ANNEX III
EC DECLARATION OF CONFORMITY
1. No … (unique identification of the toy(s))
2. Name and address of the manufacturer or his authorised representative:
3. This declaration of conformity is issued under the sole responsibility of the manufacturer:
4. Object of the declaration (identification of toy allowing traceability). It shall include a colour image of sufficient clarity to enable the identification of the toy.
5. The object of the declaration described in point 4 is in conformity with the relevant Community harmonisation legislation:
6. References to the relevant harmonised standards used, or references to the specifications in relation to which conformity is declared:
7. Where applicable: the notified body … (name, number) … performed … (description of intervention) … and issued the certificate:
8. Additional information:
Signed for and on behalf of:
(place and date of issue)
(name, function)(signature)
ANNEX IV
TECHNICAL DOCUMENTATION
The technical documentation referred to in Article 21 shall contain, in particular, so far as relevant for assessment:
a detailed description of the design and manufacture, including a list of components and materials used in the toy as well as the safety data sheets on chemicals used, to be obtained from the chemical suppliers;
the safety assessment(s) carried out in accordance with Article 18;
a description of the conformity assessment procedure followed;
a copy of the EC declaration of conformity;
the addresses of the places of manufacture and storage;
copies of documents that the manufacturer has submitted to a notified body, if involved;
test reports and description of the means whereby the manufacturer ensured conformity of production with the harmonised standards, if the manufacturer followed the internal production control procedure referred to in Article 19(2); and
a copy of the EC-type examination certificate, a description of the means whereby the manufacturer ensured conformity of the production with the product type as described in the EC-type examination certificate, and copies of the documents that the manufacturer submitted to the notified body, if the manufacturer submitted the toy to EC-type examination and followed the conformity to type procedure referred to in Article 19(3).
ANNEX V
WARNINGS
(as referred to in Article 11)
PART A
GENERAL WARNINGS
The user limitations referred to in Article 11(1) shall include at least the minimum or maximum age of the user and, where appropriate, the abilities of the user, the maximum or minimum weight of the user and the need to ensure that the toy is used only under adult supervision.
PART B
SPECIFIC WARNINGS AND INDICATIONS OF PRECAUTIONS TO BE TAKEN WHEN USING CERTAIN CATEGORIES OF TOYS
1. Toys not intended for use by children under 36 months
Toys which might be dangerous for children under 36 months of age shall bear a warning such as ‘Not suitable for children under 36 months’ or ‘Not suitable for children under three years’ or a warning in the form of the following graphic:
These warnings shall be accompanied by a brief indication, which may appear in the instructions for use, of the specific hazard calling for this precaution.
This point shall not apply to toys which, on account of their function, dimensions, characteristics or properties, or on other cogent grounds, are manifestly unsuitable for children under 36 months.
2. Activity toys
Activity toys shall bear the following warning:
‘Only for domestic use’.
Activity toys attached to a crossbeam as well as other activity toys, where appropriate, shall be accompanied by instructions drawing attention to the need to carry out checks and maintenance of the main parts (suspensions, fixings, anchorages, etc.) at intervals, and pointing out that, if these checks are not carried out, the toy may cause a fall or overturn.
Instructions must also be given as to the correct assembly of the toy, indicating those parts which can present a danger if incorrectly assembled. Specific information regarding a suitable surface on which to place the toy shall be given.
3. Functional toys
Functional toys shall bear the following warning:
‘To be used under the direct supervision of an adult’.
In addition, these toys shall be accompanied by directions giving working instructions as well as the precautions to be taken by the user, with the warning that failure to take these precautions will expose the user to the hazards – to be specified – normally associated with the appliance or product of which the toy is a scale model or imitation. It shall also be indicated that the toy must be kept out of the reach of children under a certain age, which shall be specified by the manufacturer.
4. Chemical toys
Without prejudice to the application of the provisions laid down in applicable Community legislation on the classification, packaging and labelling of certain substances or mixtures, the instructions for use of toys containing inherently dangerous substances or mixtures shall bear a warning of the dangerous nature of these substances or mixtures and an indication of the precautions to be taken by the user in order to avoid hazards associated with them, which shall be specified concisely according to the type of toy. The first aid to be given in the event of serious accidents resulting from the use of this type of toy shall also be mentioned. It shall also be stated that the toy must be kept out of reach of children under a certain age, which shall be specified by the manufacturer.
In addition to the instructions provided for in the first subparagraph, chemical toys shall bear the following warning on their packaging:
‘Not suitable for children under ( *1 ) years. For use under adult supervision’.
In particular, the following are regarded as chemical toys: chemistry sets, plastic embedding sets, miniature workshops for ceramics, enamelling or photography and similar toys which lead to a chemical reaction or similar substance alteration during use.
5. Skates, roller skates, online skates, skateboards, scooters and toy bicycles for children
Where these toys are offered for sale as toys, they shall bear the following warning:
‘Protective equipment should be worn. Not to be used in traffic’.
Moreover, the instructions for use shall contain a reminder that the toy must be used with caution, since it requires great skill, so as to avoid falls or collisions causing injury to the user or third parties. Some indication shall also be given as to recommended protective equipment (helmets, gloves, knee-pads, elbow-pads, etc.).
6. Aquatic toys
Aquatic toys shall bear the following warning:
‘Only to be used in water in which the child is within its depth and under adult supervision’.
7. Toys in food
Toys contained in food or co-mingled with food shall bear the following warning:
‘Toy inside. Adult supervision recommended’.
8. Imitations of protective masks and helmets
Imitations of protective masks and helmets shall bear the following warning:
‘This toy does not provide protection’.
9. Toys intended to be strung across a cradle, cot or perambulator by means of strings, cords, elastics or straps
Toys intended to be strung across a cradle, cot or perambulator by means of strings, cords, elastics or straps shall carry the following warning on the packaging, which shall also be permanently marked on the toy:
‘To prevent possible injury by entanglement, remove this toy when the child starts trying to get up on its hands and knees in a crawling position’.
10. Packaging for fragrances in olfactory board games, cosmetic kits and gustative games
Packaging for fragrances in olfactory board games, cosmetic kits and gustative games that contain the fragrances set out in points 41 to 55 of the list set out in the first paragraph of point 11 of Part III of Annex II and of the fragrances set out in points 1 to 11 of the list set out in third paragraph of that point shall contain the following warning:
‘Contains fragrances that may cause allergies’.
( 1 ) OJ 196, 16.8.1967, p. 1.
( 2 ) OJ L 200, 30.7.1999, p. 1.
( 3 ) OJ L 353, 31.12.2008, p. 1.
( 4 ) OJ L 262, 27.9.1976, p. 169.
( *1 ) Age to be specified by the manufacturer.