Category of short-range devices

Scope

Non-specific short-range devices (SRDs)

Covers all kinds of radio devices, regardless of the application or their purpose, which fulfil the technical conditions as specified for a given frequency band. Typical uses include telemetry, telecommand, alarms, data transmissions in general and other applications.

Active medical implant devices

Covers the radio part of active implantable medical devices that are intended to be fully or partially introduced, surgically or medically, into the human body or that of an animal, and where applicable their peripherals. Active implantable medical devices are defined in Council Directive 90/385/EEC (1).

Assistive listening devices (ALDs)

Covers radio communications systems that allow persons with hearing impairment to increase their listening capability. Typical system installations include one or more radio transmitters and one or more radio receivers.

High duty cycle/continuous transmission devices

Covers radio devices that rely on low latency and high duty cycle transmissions. These devices are typically used for personal wireless audio and multimedia streaming systems used for combined audio/video transmissions and audio/video sync signals, mobile phones, automotive or home entertainment system, wireless microphones, cordless loudspeakers, cordless headphones, radio devices carried on a person, assistive listening devices, in-ear monitoring, wireless microphones for use at concerts or other stage productions, and low power analogue FM transmitters.

Inductive devices

Covers radio devices that use magnetic fields with inductive loop systems for near field communications and determination applications. This typically includes devices for car immobilisation, animal identification, alarm systems, cable detection, waste management, personal identification, wireless voice links, access control, proximity and metal sensors, anti-theft systems as well as RF anti-theft induction systems, data transfer to hand-held devices, automatic article identification, wireless control systems and automatic road tolling.

Low duty cycle/high reliability devices

Covers radio devices that rely on low overall spectrum utilisation and low duty cycle spectrum access rules to ensure highly reliable spectrum access and transmissions in shared bands. Typical applications include alarm systems that use radio communication for indicating an alert condition at a distant location and social alarm systems that allow reliable communication for a person in distress.

Medical data acquisition devices

Covers the transmission of non-voice data to and from non-implantable medical devices in order to monitor, diagnose and treat patients in healthcare facilities or in their homes as prescribed by duly authorised healthcare professionals.

PMR446 devices

Covers hand portable equipment (without base station or repeater use) carried on a person or manually operated, which uses integral antennas only in order to maximise sharing and minimise interference. PMR 446 equipment operates in short-range peer-to-peer mode and shall not be used as a part of infrastructure network nor as a repeater.

Radio determination devices

Covers radio devices used for determining the position, velocity and/or other characteristics of an object, or for obtaining information relating to these parameters. Radio determination equipment typically conducts measurements to obtain such characteristics. Radio determination devices exclude any kind of point-to-point or point-to-multipoint radio communications.

Radio frequency identification (RFID) devices

Covers tag/interrogator based radio communications systems, consisting of (i) radio devices (tags) attached to animate or inanimate items and (ii) transmitter/receiver units (interrogators) which activate the tags and receive data back. Typical applications include the tracking and identification of items, for instance for the purpose of electronic article surveillance (EAS), and collecting and transmitting data relating to the items to which tags are attached, which may be either battery-less, battery assisted or battery powered. The responses from a tag are validated by its interrogator and passed to its host system.

Transport and traffic telematics devices

Covers radio devices that are used in the fields of transport (road, rail, water or air, depending on the relevant technical restrictions), traffic management, navigation, mobility management and in intelligent transport systems (ITS). Typical applications include interfaces between different modes of transport, communication between vehicles (e.g. car to car), between vehicles and fixed locations (e.g. car to infrastructure) as well as communication from and to users.

Wideband data transmission devices

Covers radio devices that use wideband modulation techniques to access the spectrum. Typical uses include wireless access systems such as radio local area networks (WAS/RLANs) or wideband SRDs in data networks.

Band no

Frequency band

Category of short-range devices

Transmit power limit/field strength limit/power density limit

Additional parameters (channelling and/or channel access and occupation rules)

Other usage restrictions

Implemen-tation deadline

1

9-59,750 kHz

Inductive devices

72 dΒμΑ/m at 10 metres

1 July 2014

90

9-148 kHz

Radio determination devices

46 dBμA/m at 10 m distance at a reference of 100 Hz, outside the Nuclear Magnetic Resonance (NMR) device.

Magnetic field strength descending 10 dB/decade above 100Hz.

For enclosed Nuclear Magnetic Resonance (NMR) applications [j].

1 July 2022

2

9-315 kHz

Active medical implant devices

30 dΒμΑ/m at 10 metres

Duty cycle limit: 10 %

This set of usage conditions is only available to active implantable medical devices.

1 July 2014

3

59,750-60,250 kHz

Inductive devices

42 dΒμΑ/m at 10 metres

1 July 2014

4

60,250-74,750 kHz

Inductive devices

72 dBμA/m at 10 metres

1 July 2014

5

74,750-75,250 kHz

Inductive devices

42 dBμA/m at 10 metres

1 July 2014

6

75,250-77,250 kHz

Inductive devices

72 dBμA/m at 10 metres

1 July 2014

7

77,250-77,750 kHz

Inductive devices

42 dBμA/m at 10 metres

1 July 2014

8

77,750-90 kHz

Inductive devices

72 dBμA/m at 10 metres

1 July 2014

9

90-119 kHz

Inductive devices

42 dBμA/m at 10 metres

1 July 2014

10

119-128,6 kHz

Inductive devices

66 dBμA/m at 10 metres

1 July 2014

11

128,6-129,6 kHz

Inductive devices

42 dBμA/m at 10 metres

1 July 2014

12

129,6-135 kHz

Inductive devices

66 dBμA/m at 10 metres

1 July 2014

13

135-140 kHz

Inductive devices

42 dBμA/m at 10 metres

1 July 2014

14

140-148,5 kHz

Inductive devices

37,7 dΒμΑ/m at 10 metres

1 July 2014

15

148,5-5 000 kHz [1]

Inductive devices

-15 dΒμΑ/m at 10 metres in any bandwidth of 10 kHz.

Furthermore the total field strength is -5 dΒμΑ/m at 10 m for systems operating at bandwidths larger than 10 kHz

1 July 2014

91

148-5 000 kHz

Radio determination devices

-15 dBμA/m at 10 m distance outside the Nuclear Magnetic Resonance (NMR) device.

For enclosed Nuclear Magnetic Resonance (NMR) applications [j].

1 July 2022

17

400-600 kHz

Radio Frequency Identification (RFID) devices

-8 dΒμΑ/m at 10 metres

1 July 2014

85

442,2-450,0 kHz

Non-specific short-range devices

7 dBμA/m at 10 m

Channel spacing ≥ 150 Hz

This set of usage conditions is only available for person detection and collision avoidance devices.

1 January 2020

18

456,9-457,1 kHz

Non-specific short-range devices

7 dBμA/m at 10 m

This set of usage conditions is only available for emergency detections of buried victims and valuable items devices.

1 July 2014

19

984-7 484 kHz

Transport and Traffic Telematics devices

9 dΒμΑ/m at 10 m

Duty cycle limit: 1 %

This set of usage conditions is only available for Eurobalise transmissions in the presence of trains using the 27 090 -27 100 kHz band for telepowering pursuant to the conditions set for band 28.

1 July 2014

20

3 155 -3 400 kHz

Inductive devices

13,5 dΒμΑ/m at 10 metres

1 July 2014

21

5 000 -30 000 kHz [2]

Inductive devices

-20 dΒμΑ/m at 10 metres in any bandwidth of 10 kHz. Furthermore the total field strength is -5 dΒμΑ/m at 10 m for systems operating at bandwidths larger than 10 kHz

1 July 2014

92

5 000 -30 000 kHz

Radio determination devices

-5 dBμA/m at 10m distance outside the Nuclear Magnetic Resonance (NMR) device.

For enclosed Nuclear Magnetic Resonance (NMR) applications [j].

1 July 2022

22

6 765 -6 795 kHz

Inductive devices

42 dΒμΑ/m at 10 metres

1 July 2014

23

7 300 -23 000 kHz

Transport and Traffic Telematics devices

-7 dΒμΑ/m at 10 m

Antenna requirements apply [8].

This set of usage conditions is only available for Eurobalise transmissions in the presence of trains using the 27 090 -27 100 kHz band for telepowering pursuant to the conditions set for band 28.

1 July 2014

24

7 400 -8 800 kHz

Inductive devices

9 dΒμΑ/m at 10 metres

1 July 2014

25

10 200 -11 000 kHz

Inductive devices

9 dΒμΑ/m at 10 metres

1 July 2014

27a

13 553 -13 567 kHz

Inductive devices

42 dΒμΑ/m at 10 metres

Transmission mask and antenna requirements for all combined frequency segments apply [8], [9].

1 January 2020

27b

13 553 -13 567 kHz

Radio Frequency Identification (RFID) devices

60 dΒμΑ/m at 10 metres

Transmission mask and antenna requirements for all combined frequency segments apply [8], [9].

1 July 2014

27c

13 553 -13 567 kHz

Non-specific short-range devices

10 mW e.r.p.

1 July 2014

28

26 957 -27 283 kHz

Non-specific short-range devices

10 mW e.r.p.

1 July 2014

29

26 990 -27 000 kHz

Non-specific short-range devices

100 mW e.r.p.

Duty cycle limit: 0,1 %.

Model control devices [d] may operate without duty cycle restrictions.

1 July 2014

30

27 040 -27 050 kHz

Non-specific short-range devices

100 mW e.r.p.

Duty cycle limit: 0,1 %.

Model control devices [d] may operate without duty cycle restrictions.

1 July 2014

31

27 090 -27 100 kHz

Non-specific short-range devices

100 mW e.r.p.

Duty cycle limit: 0,1 %.

Model control devices [d] may operate without duty cycle restrictions.

1 July 2014

32

27 140 -27 150 kHz

Non-specific short-range devices

100 mW e.r.p.

Duty cycle limit: 0,1 %.

Model control devices [d] may operate without duty cycle restrictions.

1 July 2014

33

27 190 -27 200 kHz

Non-specific short-range devices

100 mW e.r.p.

Duty cycle limit: 0,1 %.

Model control devices [d] may operate without duty cycle restrictions.

1 July 2014

34

30-37,5 MHz

Active medical implant devices

1 mW e.r.p.

Duty cycle limit: 10 %

This set of usage conditions is only available to ultra-low power medical membrane implants for blood pressure measurements within the definition of active implantable medical devices.

1 July 2014

93

30-130 MHz

Radio determination devices

-36 dBm e.r.p. outside the Nuclear Magnetic Resonance (NMR) device.

For enclosed Nuclear Magnetic Resonance (NMR) applications [j].

1 July 2022

35

40,66-40,7 MHz

Non-specific short-range devices

10 mW e.r.p.

1 January 2018

36

87,5-108 MHz

High duty cycle/continuous transmission devices

50 nW e.r.p.

Channel spacing up to 200 kHz.

This set of usage conditions is only available to wireless audio and multimedia streaming transmitters with analogue frequency modulation (FM).

1 July 2014

37a

169,4-169,475 MHz

Assistive Listening Devices (ALD)

500 mW e.r.p.

Channel spacing: max 50 kHz.

1 July 2014

37c

169,4-169,475 MHz

Non-specific short-range devices

500 mW e.r.p.

Channel spacing: max 50 kHz.

Duty cycle limit: 1,0 %.

For metering devices [a], the duty cycle limit is 10,0 %

1 July 2014

38

169,4-169,4875 MHz

Non-specific short-range devices

10 mW e.r.p.

Duty cycle limit: 0,1 %.

1 January 2020

39a

169,4875-169,5875 MHz

Assistive Listening Devices (ALD)

500 mW e.r.p.

Channel spacing: max 50 kHz.

1 July 2014

39b

169,4875-169,5875 MHz

Non-specific short-range devices

10 mW e.r.p.

Duty cycle limit: 0,001 %.

Between 00:00h and 06:00h local time a duty cycle limit of 0,1 % may be used.

1 January 2020

40

169,5875-169,8125 MHz

Non-specific short-range devices

10 mW e.r.p.

Duty cycle limit: 0,1 %.

1 January 2020

82

173,965-216 MHz

Assistive Listening Devices (ALD)

10 mW e.r.p.

On a tuning range basis [5]. Channel spacing: max 50 kHz. A threshold of 35 dBμV/m is required to ensure the protection of a DAB receiver located at 1,5 m from the ALD device, subject to DAB signal strength measurements taken around the ALD operating site. The ALD device should operate under all circumstances at least 300 kHz away from the channel edge of an occupied DAB channel.

Requirements on techniques to access spectrum and mitigate interference apply [7].

1 January 2018

41

401-402 MHz

Active medical implant devices

25 μW e.r.p.

Channel spacing: 25 kHz.

Individual transmitters may combine adjacent channels for increased bandwidth up to 100 kHz.

Requirements on techniques to access spectrum and mitigate interference apply [7].

Alternatively, a duty cycle limit of 0,1 % may also be used.

This set of usage conditions is only available for systems specifically designed for the purpose of providing non-voice digital communications between active implantable medical devices and/or body-worn devices and other devices external to the human body used for transferring non-time critical individual patient-related physiological information.

1 July 2014

42

402-405 MHz

Active medical implant devices

25 μW e.r.p.

Channel spacing: 25 kHz.

Individual transmitters may combine adjacent channels for increased bandwidth up to 300 kHz.

Other techniques to access spectrum or mitigate interference, including bandwidths greater than 300 kHz, can be used provided they ensure compatible operation with the other users and in particular with meteorological radiosondes [7].

This set of usage conditions is only available to active implantable medical devices.

1 July 2014

43

405-406 MHz

Active medical implant devices

25 μW e.r.p.

Channel spacing: 25 kHz

Individual transmitters may combine adjacent channels for increased bandwidth up to 100 kHz.

Requirements on techniques to access spectrum and mitigate interference apply [7].

Alternatively a duty cycle limit of 0,1 % may also be used.

This set of usage conditions is only available for systems specifically designed for the purpose of providing non-voice digital communications between active implantable medical devices and/or body-worn devices and other devices external to the human body used for transferring non-time critical individual patient-related physiological information.

1 July 2014

86

430-440 MHz

Medical data acquisition devices

-50 dBm/100kHz e.r.p. power density but not exceeding a total power of -40 dBm/10MHz (both limits are intended for measurement outside of the patient’s body)

The set of usage conditions is only available for Ultra-Low Power Wireless Medical Capsule Endoscopy (ULP-WMCE) applications [h].

1 January 2020

44a

433,05-434,79 MHz

Non-specific short-range devices

1 mW e.r.p. and -13 dBm/10 kHz power density for bandwidth modulation larger than 250 kHz

Voice applications are allowed with advanced mitigation techniques. Other audio and video applications are excluded.

1 July 2014

44b

433,05-434,79 MHz

Non-specific short-range devices

10 mW e.r.p.

Duty cycle limit: 10 %

1 January 2020

45c

434,04-434,79 MHz

Non-specific short-range devices

10 mW e.r.p.

Duty cycle limit: 100 % subject to channel spacing up to 25 kHz.

Voice applications are allowed with advanced mitigation techniques. Other audio and video applications are excluded.

1 January 2020

83

446,0-446,2 MHz

PMR446

500 mW e.r.p.

Requirements on techniques to access spectrum and mitigate interference apply [7].

1 January 2018

87

862-863 MHz

Non-specific short-range devices

25 mW e.r.p.

Duty cycle limit: 0,1 %.

Bandwidth: ≤ 350 kHz.

1 January 2020

46a

863-865 MHz

Non-specific short-range devices

25 mW e.r.p.

Requirements on techniques to access spectrum and mitigate interference apply [7].

Alternatively, a duty cycle limit of 0,1 % may also be used.

1 January 2018

46b

863-865 MHz

High duty cycle/continuous transmission devices

10 mW e.r.p.

This set of usage conditions is only available to wireless audio and multimedia streaming devices.

1 July 2014

84

863-868 MHz

Wideband data transmission devices

25 mW e.r.p.

Requirements on techniques to access spectrum and mitigate interference apply [7].

Bandwidth: > 600 kHz and ≤ 1 MHz.

Duty cycle: ≤ 10 % for network access points [g]

Duty cycle: ≤ 2,8 % otherwise

This set of usage conditions is only available for wideband SRDs in data networks [g].

1 January 2018

47

865-868 MHz

Non-specific short-range devices

25 mW e.r.p.

Requirements on techniques to access spectrum and mitigate interference apply [7].

Alternatively, a duty cycle limit of 1 % may also be used.

1 January 2020

47a

865-868 MHz [6]

Radio Frequency Identification (RFID) devices

2 W e.r.p.

Interrogator transmissions at 2 W e.r.p. only permitted within the four channels centred at 865,7 MHz, 866,3 MHz, 866,9 MHz and 867,5 MHz

RFID interrogator devices placed on the market before the repeal date of EC Decision 2006/804/EC are ‘grandfathered’, i.e. they are continuously permitted to be used in line with the provisions set out in EC Decision 2006/804/EC before the repeal date.

Requirements on techniques to access spectrum and mitigate interference apply [7].

Bandwidth ≤ 200 kHz

1 January 2018

47b

865-868 MHz

Non-specific short-range devices

500 mW e.r.p.

Transmissions only permitted within the frequency ranges 865,6-865,8 MHz, 866,2-866,4 MHz, 866,8-867,0 MHz and 867,4-867,6 MHz.

Adaptive Power Control (APC) required. Alternatively other mitigation technique with at least an equivalent level of spectrum compatibility.

Requirements on techniques to access spectrum and mitigate interference apply [7].

Bandwidth: ≤ 200 kHz

Duty cycle: ≤ 10 % for network access points [g]

Duty cycle: ≤ 2,5 % otherwise

This set of usage conditions is only available for data networks [g].

1 January 2018

48

868-868,6 MHz

Non-specific short-range devices

25 mW e.r.p.

Requirements on techniques to access spectrum and mitigate interference apply [7].

Alternatively, a duty cycle limit of 1 % may also be used.

1 January 2020

49

868,6-868,7 MHz

Low duty cycle/high reliability devices

10 mW e.r.p.

Channel spacing: 25 kHz. The whole frequency band may also be used as a single channel for high-speed data transmission.

Duty cycle limit: 1,0 %

This set of usage conditions is only available to alarm systems [e].

1 July 2014

50

868,7-869,2 MHz

Non-specific short-range devices

25 mW e.r.p.

Requirements on techniques to access spectrum and mitigate interference apply [7].

Alternatively a duty cycle limit of 0,1 % may also be used.

1 January 2020

51

869,2-869,25 MHz

Low duty cycle/high reliability devices

10 mW e.r.p.

Channel spacing: 25 kHz. Duty cycle limit: 0,1 %

This set of usage conditions is only available to social alarm devices [b].

1 July 2014

52

869,25-869,3 MHz

Low duty cycle/high reliability devices

10 mW e.r.p.

Channel spacing: 25 kHz. Duty cycle limit: 0,1 %

This set of usage conditions is only available to alarm systems [e].

1 July 2014

53

869,3-869,4 MHz

Low duty cycle/high reliability devices

10 mW e.r.p.

Channel spacing: 25 kHz. Duty cycle limit: 1,0 %

This set of usage conditions is only available to alarm systems [e].

1 July 2014

54

869,4-869,65 MHz

Non-specific short-range devices

500 mW e.r.p.

Requirements on techniques to access spectrum and mitigate interference apply [7].

Alternatively, a Duty cycle limit of 10 % may also be used.

1 January 2020

55

869,65-869,7 MHz

Low duty cycle/high reliability devices

25 mW e.r.p.

Channel spacing: 25 kHz Duty cycle limit: 10 %

This set of usage conditions is only available to alarm systems [e].

1 July 2014

56a

869,7-870 MHz

Non-specific short-range devices

5 mW e.r.p.

Voice applications are allowed with advanced mitigation techniques. Other audio and video applications are excluded.

1 July 2014

56b

869,7-870 MHz

Non-specific short-range devices

25 mW e.r.p.

Requirements on techniques to access spectrum and mitigate interference apply [7].

Alternatively, a duty cycle limit of 1 % may also be used.

1 January 2020

57a

2 400 -2 483,5 MHz

Non-specific short-range devices

10 mW equivalent isotropic radiated power (e.i.r.p.)

1 July 2014

57b

2 400 -2 483,5 MHz

Radio determination devices

25 mW e.i.r.p.

1 July 2014

57c

2 400 -2 483,5 MHz

Wideband data transmission devices

100 mW e.i.r.p. and 100 mW/100 kHz e.i.r.p. density applies when frequency hopping modulation is used, 10 mW/MHz e.i.r.p. density applies when other types of modulation are used

Requirements on techniques to access spectrum and mitigate interference apply [7].

1 July 2014

58

2 446 -2 454 MHz

Radio Frequency Identification (RFID) devices

500 mW e.i.r.p.

Requirements on techniques to access spectrum and mitigate interference apply [7].

1 July 2014

59

2 483,5 -2 500 MHz

Active medical implant devices

10 mW e.i.r.p.

Requirements on techniques to access spectrum and mitigate interference apply [7].

Channel spacing: 1 MHz. The whole frequency band may also be used dynamically as a single channel for high-speed data transmissions.

In addition, a duty cycle limit of 10 % applies.

This set of usage conditions is only available to active implantable medical devices.

Peripheral master units are for indoor use only.

1 July 2014

59a

2 483,5 -2 500 MHz

Medical data acquisition devices

1 mW e.i.r.p.

Requirements on techniques to access spectrum and mitigate interference apply [7].

Modulation Bandwidth: ≤ 3 MHz.

In addition, a duty cycle: ≤ 10 % applies.

The set of usage conditions is only available for medical body area network system (MBANS) [f] for indoor use within healthcare facilities

1 January 2018

59b

2 483,5 -2 500 MHz

Medical data acquisition devices

10 mW e.i.r.p.

Requirements on techniques to access spectrum and mitigate interference apply [7].

Modulation Bandwidth: ≤ 3 MHz.

In addition, a duty cycle: ≤ 2 % applies

The set of usage conditions is only available for medical body area network system (MBANS) [f] for indoor use within the patient’s home

1 January 2018

60

4 500 -7 000 MHz

Radio determination devices

24 dBm e.i.r.p. [3]

Requirements on techniques to access spectrum and mitigate interference apply [7].

This set of usage conditions is only available to Tank Level Probing Radar [c].

1 July 2014

61

5 725 -5 875 MHz

Non-specific short-range devices

25 mW e.i.r.p.

1 July 2014

62

5 795 -5 815 MHz

Transport and Traffic Telematics devices

2 W e.i.r.p.

Requirements on techniques to access spectrum and mitigate interference apply [7].

This set of usage conditions applies only to road tolling applications and smart tachograph, weight and dimension applications [i].

1 January 2020

88

5 855 -5 865 MHz

Transport and Traffic Telematics devices

33 dBm e.i.r.p., 23 dBm/MHz e.i.r.p. density and a Transmit Power Control (TPC) range of 30 dB

Requirements on techniques to access spectrum and mitigate interference apply [7].

This set of usage conditions is only available to vehicle-to-vehicle, vehicle-to-infrastructure and infrastructure-to-vehicle systems.

1 January 2020

89

5 865 -5 875 MHz

Transport and Traffic Telematics devices

33 dBm e.i.r.p., 23 dBm/MHz e.i.r.p. density and a Transmit Power Control (TPC) range of 30 dB

Requirements on techniques to access spectrum and mitigate interference apply [7].

This set of usage conditions is only available to vehicle-to-vehicle, vehicle-to-infrastructure and infrastructure-to-vehicle systems.

1 January 2020

63

6 000 -8 500 MHz

Radio determination devices

7 dBm/50 MHz peak e.i.r.p. and -33 dBm/MHz mean e.i.r.p.

Automatic power control and antenna requirements as well as requirements on techniques to access spectrum and mitigate interference apply [7], [8] [10].

This set of usage conditions is only available to Level Probing Radar.

Established exclusion zones around radio astronomy sites shall be obeyed.

1 July 2014

64

8 500 -10 600 MHz

Radio determination devices

30 dBm e.i.r.p. [3]

Requirements on techniques to access spectrum and mitigate interference apply [7].

This set of usage conditions is only available to Tank Level Probing Radar [c].

1 July 2014

65

17,1-17,3 GHz

Radio determination devices

26 dBm e.i.r.p.

Requirements on techniques to access spectrum and mitigate interference apply [7].

This set of usage conditions is only available to ground-based systems.

1 July 2014

66

24,05-24,075 GHz

Transport and Traffic Telematics devices

100 mW e.i.r.p.

1 July 2014

67

24,05-26,5 GHz

Radio determination devices

26 dBm/50 MHz peak e.i.r.p. and -14 dBm/MHz mean e.i.r.p.

Automatic power control and antenna requirements as well as requirements on techniques to access spectrum and mitigate interference apply [7]. [8], [10]

This set of usage conditions is only available to Level Probing Radar.

Established exclusion zones around radio astronomy sites shall be obeyed.

1 July 2014

68

24,05-27 GHz

Radio determination devices

43 dBm e.i.r.p. [3]

Requirements on techniques to access spectrum and mitigate interference apply [7].

This set of usage conditions is only available to Tank Level Probing Radar [c].

1 July 2014

69a

24,075-24,15 GHz

Transport and Traffic Telematics devices

100 mW e.i.r.p.

Requirements on techniques to access spectrum and mitigate interference apply [7].

This set of usage conditions is only available to ground-based vehicle radars.

1 July 2014

69b

24,075-24,15 GHz

Transport and Traffic Telematics devices

0,1 mW e.i.r.p.

1 July 2014

70a

24,15-24,25 GHz

Non-specific short-range devices

100 mW e.i.r.p.

1 July 2014

70b

24,15-24,25 GHz

Transport and Traffic Telematics devices

100 mW e.i.r.p.

1 July 2014

74a

57-64 GHz

Non-specific short-range devices

100 mW e.i.r.p. and a maximum transmit power of 10 dBm

1 January 2020

74b

57-64 GHz

Radio determination devices

43 dBm e.i.r.p. [3]

Requirements on techniques to access spectrum and mitigate interference apply [7].

This set of usage conditions is only available to Tank Level Probing Radar [c].

1 July 2014

74c

57-64 GHz

Radio determination devices

35 dBm/50 MHz peak e.i.r.p. and -2 dBm/MHz mean e.i.r.p.

Automatic power control and antenna requirements as well as requirements on techniques to access spectrum and mitigate interference apply [7] [8], [10].

This set of usage conditions is only available to Level Probing Radar.

1 July 2014

75

57-71 GHz

Wideband data transmission devices

40 dBm e.i.r.p. and 23 dBm/MHz e.i.r.p. density

Requirements on techniques to access spectrum and mitigate interference apply [7].

Fixed outdoor installations are excluded.

1 January 2020

75a

57-71 GHz

Wideband data transmission devices

40 dBm e.i.r.p., 23 dBm/MHz e.i.r.p. density and maximum transmit power of 27 dBm at the antenna port or ports

Requirements on techniques to access spectrum and mitigate interference apply [7].

1 January 2020

75b

57-71 GHz

Wideband data transmission devices

55 dBm e.i.r.p., 38 dBm/MHz e.i.r.p. density and a transmit antenna gain ≥ 30 dBi

Requirements on techniques to access spectrum and mitigate interference apply [7].

This set of usage conditions is only available to fixed outdoor installations.

1 January 2020

76

61-61,5 GHz

Non-specific short-range devices

100 mW e.i.r.p.

1 July 2014

77

63,72-65,88 GHz

Transport and Traffic Telematics devices

40 dBm e.i.r.p.

TTT devices placed on the market before the 1 January 2020 are ‘grandfathered’, i.e. they are permitted to use the previous frequency range 63-64 GHz, and otherwise the same conditions apply.

This set of usage conditions is only available to vehicle-to-vehicle, vehicle-to-infrastructure and infrastructure-to-vehicle systems.

1 January 2020

78a

75-85 GHz

Radio determination devices

34dBm/50 MHz peak e.i.r.p. and -3 dBm/MHz mean e.i.r.p.

Automatic power control and antenna requirements as well as requirements on techniques to access spectrum and mitigate interference apply [7], [8], [10].

This set of usage conditions is only available to Level Probing Radar.

Established exclusion zones around radio astronomy sites shall be obeyed.

1 July 2014

78b

75-85 GHz

Radio determination devices

43 dBm e.i.r.p. [3]

Requirements on techniques to access spectrum and mitigate interference apply [7].

This set of usage conditions is only available to Tank Level Probing Radar [c].

1 July 2014

79a

76-77 GHz

Transport and Traffic Telematics devices

55 dBm peak e.i.r.p. and 50 dBm mean e.i.r.p. and 23,5 dBm mean e.i.r.p. for pulse radars

Requirements on techniques to access spectrum and mitigate interference apply [7].

Fixed transportation infrastructure radars have to be of a scanning nature in order to limit the illumination time and ensure a minimum silent time to achieve coexistence with automotive radar systems.

This set of usage conditions is only available to ground-based vehicle and infrastructure systems.

1 June 2020

79b

76-77 GHz

Transport and Traffic Telematics devices

30 dBm peak e.i.r.p. and

3 dBm/MHz average power spectral density

Duty cycle limit: ≤ 56 %/s

This set of usage conditions is only available to obstacle detection systems for rotorcraft use [4].

1 January 2018

80a

122-122,25 GHz

Non-specific short-range devices

10 dBm/250MHz e.i.r.p. and

-48 dBm/MHz at 30° elevation

1 January 2018

80b

122,25-123 GHz

Non-specific short-range devices

100 mW e.i.r.p.

1 January 2018

81

244-246 GHz

Non-specific short-range devices

100 mW e.i.r.p.

1 July 2014