EUR-Lex Access to European Union law
This document is an excerpt from the EUR-Lex website
Document 32012D0481R(01)
Corrigendum to Commission Decision 2012/481/EU of 16 August 2012 establishing the ecological criteria for the award of the EU Ecolabel for printed paper ( OJ L 223, 21.8.2012 )
Corrigendum to Commission Decision 2012/481/EU of 16 August 2012 establishing the ecological criteria for the award of the EU Ecolabel for printed paper ( OJ L 223, 21.8.2012 )
Corrigendum to Commission Decision 2012/481/EU of 16 August 2012 establishing the ecological criteria for the award of the EU Ecolabel for printed paper ( OJ L 223, 21.8.2012 )
OJ L 125, 7.5.2013, p. 35–36
(BG, ES, CS, DA, DE, ET, EL, EN, FR, IT, LV, LT, HU, MT, NL, PL, PT, RO, SK, SL, FI, SV)
ELI: http://data.europa.eu/eli/dec/2012/481/corrigendum/2013-05-07/oj
7.5.2013 |
EN |
Official Journal of the European Union |
L 125/35 |
Corrigendum to Commission Decision 2012/481/EU of 16 August 2012 establishing the ecological criteria for the award of the EU Ecolabel for printed paper
( Official Journal of the European Union L 223 of 21 August 2012 )
On page 58, Subcriterion 2(a), List of hazard statements and risk phrases:
for:
‘H330 Fatal if inhaled |
R26’ |
read:
‘H330 Fatal if inhaled |
R23 or R26’ |
on page 62, Criterion 3:
for:
‘ Assessment and verification: the applicant shall provide the test result of the recyclability for wet strength agents and removability for adhesives. The reference test methods are PTS method PTS-RH 021/97 (for wet strength agents), INGEDE Method 12 (for non-soluble adhesive removability), or equivalent test methods. The deinkability shall be proven by using the “Deinking Scorecard” (1) of the European Recovered Paper Council or equivalent test methods. Testing must be performed on three types of paper: uncoated, coated and surface-sized paper. If a type of printing ink is only sold for one or two specific types of paper, it is sufficient to test the paper type(s) in question. The applicant shall provide a declaration that coated and laminated printed paper products are in compliance with point 3(b). Where a part of a printed paper product is easily removable (for instance a plastic cover or a reusable exercise book cover), the recyclability test may be made without this component. The easiness of removal of the non-paper components shall be proven via a declaration of the paper collecting company, the recycling company or an equivalent organisation. Test methods shown by a competent and independent third party as giving equivalent results may also be used.’,
read:
‘ Assessment and verification: the applicant shall provide the test result of the recyclability for wet strength agents and removability for adhesives. The reference test methods are PTS method PTS-RH 021/97 (for wet strength agents), INGEDE Method 12 (for non-soluble adhesive removability) or equivalent test methods. The deinkability shall be proven by using the “Deinking Scorecard” (1) of the European Recovered Paper Council or equivalent test methods. Testing must be performed on three types of paper: uncoated, coated and surface-sized paper. If a type of printing ink is only sold for one or two specific types of paper, it is sufficient to test the paper type(s) in question. The applicant shall provide a declaration that coated and laminated printed paper products are in compliance with point 3(c). Where a part of a printed paper product is easily removable (for instance a plastic cover or a reusable exercise book cover), the recyclability test may be made without this component. The easiness of removal of the non-paper components shall be proven via a declaration of the paper collecting company, the recycling company or an equivalent organisation. Test methods shown by a competent and independent third party as giving equivalent results may also be used.’;
on page 64, Subcriterion 5(b):
for:
‘(b) Waste paper
The amount of waste paper “X” produced shall be:
Printing method |
Maximum Waste paper (%) |
Sheet offset |
23 |
Coldset, newspaper |
10 |
Coldset, form printing |
18 |
Coldset rotation (except newspapers and forms) |
19 |
Heatset rotation |
21 |
Gravure printing |
15 |
Flexography (except corrugated fibreboard) |
11 |
Digital printing |
10 |
Offset |
4 |
Flexography, corrugated fibreboard |
17 |
Screen printing |
23 ’ |
read:
‘(b) Waste paper
The amount of waste paper “X” produced shall be:
Printing method |
Maximum Waste paper (%) |
Sheet offset |
23 |
Coldset, newspaper |
10 |
Coldset, form printing |
18 |
Coldset rotation (except newspapers and forms) |
19 |
Heatset rotation |
21 |
Gravure printing |
15 |
Flexography (except corrugated fibreboard) |
11 |
Digital printing |
10 |
Flexography, corrugated fibreboard |
17 |
Screen printing |
23 ’ |
on page 65, Criterion 9:
for:
‘Criterion 9 — Information on the product
The following information shall appear on the product:
“Please collect used paper for recycling”.
Assessment and verification: the applicant shall provide a sample of the product packaging bearing the information required.’,
read:
‘Criterion 9 — Information on the product
The following information shall appear on the product:
“Please collect used paper for recycling”.
Assessment and verification: the applicant shall provide a sample of the product bearing the information required.’.