This document is an excerpt from the EUR-Lex website
Document 52018XC0615(03)
Commission communication in the framework of the implementation of Regulation (EU) 2016/425 of the European Parliament and of the Council on personal protective equipment and repealing Council Directive 89/686/EEC (Publication of titles and references of harmonised standards under Union harmonisation legislation)Text with EEA relevance.
Commission communication in the framework of the implementation of Regulation (EU) 2016/425 of the European Parliament and of the Council on personal protective equipment and repealing Council Directive 89/686/EEC (Publication of titles and references of harmonised standards under Union harmonisation legislation)Text with EEA relevance.
Commission communication in the framework of the implementation of Regulation (EU) 2016/425 of the European Parliament and of the Council on personal protective equipment and repealing Council Directive 89/686/EEC (Publication of titles and references of harmonised standards under Union harmonisation legislation)Text with EEA relevance.
OJ C 209, 15.6.2018, p. 17–36
(BG, ES, CS, DA, DE, ET, EL, EN, FR, HR, IT, LV, LT, HU, MT, NL, PL, PT, RO, SK, SL, FI, SV)
- Date of document:
- 15/06/2018; Date of publication
- Date of end of validity:
- 10/05/2023; Partial end of validity See 32023D0941
- Date of end of validity:
- 08/06/2024; Partial end of validity See 32023D0941
- Date of end of validity:
- 20/07/2024; Partial end of validity See 32023D0941
- Date of end of validity:
- 10/11/2024; Repealed by 32023D0941
- Author:
- European Commission
- Form:
- Notice
- Additional information:
- EEA relevance
- Legal basis:
- Link
- Link
- Link
- Select all documents mentioning this document No data available in the table
- Modified by:
-
Relation Act Comment Subdivision concerned From To Repealed by 32023D0941 Partial repeal 09/06/2024 Repealed by 32023D0941 Partial repeal 11/05/2023 Repealed by 32023D0941 Partial repeal 21/07/2024 Repealed by 32023D0941 11/11/2024 - Earlier related instruments:
-
- 52018XC0327(02) Replacement
- Subsequent related instruments:
-
- Corrected by 52018XC0615(03)R(01)
- Instruments cited:
- Link
- EUROVOC descriptor:
- Subject matter:
- Directory code:
|
15.6.2018 |
EN |
Official Journal of the European Union |
C 209/17 |
Commission communication in the framework of the implementation of Regulation (EU) 2016/425 of the European Parliament and of the Council on personal protective equipment and repealing Council Directive 89/686/EEC
(Publication of titles and references of harmonised standards under Union harmonisation legislation)
(Text with EEA relevance)
(2018/C 209/03)
|
ESO (1) |
Reference and title of the standard (and reference document) |
Date of start of presumption of conformity — Note 0 |
Reference of superseded standard |
Date of cessation of presumption of conformity of superseded standard Note 1 |
||||||||
|
(1) |
(2) |
(3) |
(4) |
(5) |
||||||||
|
CEN |
EN 136:1998 Respiratory protective devices — Full face masks — Requirements, testing, marking |
21.4.2018 |
|
|
||||||||
|
|
EN 136:1998/AC:2003 |
|
|
|
||||||||
|
CEN |
EN 137:2006 Respiratory protective devices — Self-contained open-circuit compressed air breathing apparatus with full face mask — Requirements, testing, marking |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 140:1998 Respiratory protective devices — Half masks and quarter masks — Requirements, testing, marking |
21.4.2018 |
|
|
||||||||
|
|
EN 140:1998/AC:1999 |
|
|
|
||||||||
|
CEN |
EN 142:2002 Respiratory protective devices — Mouthpiece assemblies — Requirements, testing, marking |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 143:2000 Respiratory protective devices — Particle filters — Requirements, testing, marking |
21.4.2018 |
|
|
||||||||
|
|
EN 143:2000/AC:2005 |
|
|
|
||||||||
|
|
EN 143:2000/A1:2006 |
21.4.2018 |
Note 3 |
|
||||||||
|
CEN |
EN 144-1:2000 Respiratory protective devices — Gas cylinder valves — Part 1: Thread connections for insert connector |
21.4.2018 |
|
|
||||||||
|
|
EN 144-1:2000/A1:2003 |
21.4.2018 |
Note 3 |
|
||||||||
|
|
EN 144-1:2000/A2:2005 |
21.4.2018 |
Note 3 |
|
||||||||
|
CEN |
EN 144-2:1998 Respiratory protective devices — Gas cylinder valves — Part 2: Outlet connections |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 144-3:2003 Respiratory protective devices — Gas cylinder valves — Part 3: Outlet connections for diving gases Nitrox and oxygen |
21.4.2018 |
|
|
||||||||
|
|
EN 144-3:2003/AC:2003 |
|
|
|
||||||||
|
CEN |
EN 145:1997 Respiratory protective devices — Self-contained closed-circuit breathing apparatus compressed oxygen or compressed oxygen-nitrogen type — Requirements, testing, marking |
21.4.2018 |
|
|
||||||||
|
|
EN 145:1997/A1:2000 |
21.4.2018 |
Note 3 |
|
||||||||
|
CEN |
EN 148-1:1999 Respiratory protective devices — Threads for facepieces — Part 1: Standard thread connection |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 148-2:1999 Respiratory protective devices — Threads for facepieces — Part 2: Centre thread connection |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 148-3:1999 Respiratory protective devices — Threads for facepieces — Part 3: Tread connection M 45 x 3 |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 149:2001+A1:2009 Respiratory protective devices — Filtering half masks to protect against particles — Requirements, testing, marking |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 166:2001 Personal eye-protection — Specifications |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 169:2002 Personal eye-protection — Filters for welding and related techniques — Transmittance requirements and recommended use |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 170:2002 Personal eye-protection — Ultraviolet filters — Transmittance requirements and recommended use |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 172:1994 Personal eye protection — Sunglare filters for industrial use |
21.4.2018 |
|
|
||||||||
|
|
EN 172:1994/A1:2000 |
21.4.2018 |
Note 3 |
|
||||||||
|
|
EN 172:1994/A2:2001 |
21.4.2018 |
Note 3 |
|
||||||||
|
CEN |
EN 174:2001 Personal eye-protection — Ski goggles for downhill skiing |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 175:1997 Personal protection — Equipment for eye and face protection during welding and allied processes |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 207:2017 Personal eye-protection equipment — Filters and eye-protectors against laser radiation (laser eye-protectors) |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 208:2009 Personal eye-protection — Eye-protectors for adjustment work on lasers and laser systems (laser adjustment eye-protectors) |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 250:2014 Respiratory equipment — Open-circuit self-contained compressed air diving apparatus — Requirements, testing and marking |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 342:2017 Protective clothing — Ensembles and garments for protection against cold |
21.4.2018 |
EN 342:2004 Note 2.1 |
|
||||||||
|
CEN |
EN 343:2003+A1:2007 Protective clothing — Protection against rain |
21.4.2018 |
|
|
||||||||
|
|
EN 343:2003+A1:2007/AC:2009 |
|
|
|
||||||||
|
CEN |
EN 352-1:2002 Hearing protectors — General requirements — Part 1: Ear-Muffs |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 352-2:2002 Hearing protectors — General requirements — Part 2: Ear-plugs |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 352-3:2002 Hearing protectors — General requirements — Part 3: Ear-muffs attached to an industrial safety helmet |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 352-4:2001 Hearing protectors — Safety requirements and testing — Part 4: Level-dependent ear-muffs |
21.4.2018 |
|
|
||||||||
|
|
EN 352-4:2001/A1:2005 |
21.4.2018 |
Note 3 |
|
||||||||
|
CEN |
EN 352-5:2002 Hearing protectors — Safety requirements and testing — Part 5: Active noise reduction ear-muffs |
21.4.2018 |
|
|
||||||||
|
|
EN 352-5:2002/A1:2005 |
21.4.2018 |
Note 3 |
|
||||||||
|
CEN |
EN 352-6:2002 Hearing protectors — Safety requirements and testing — Part 6: Ear-muffs with electrical audio input |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 352-7:2002 Hearing protectors — Safety requirements and testing — Part 7: Level-dependent ear-plugs |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 352-8:2008 Hearing protectors — Safety requirements and testing — Part 8: Entertainment audio ear-muffs |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 353-1:2014+A1:2017 Personal fall protection equipment — Guided type fall arresters including an anchor line — Part 1: Guided type fall arresters including a rigid anchor line |
21.4.2018 |
EN 353-1:2014 Note 2.1 |
|
||||||||
|
CEN |
EN 353-2:2002 Personal protective equipment against falls from a height — Part 2: Guided type fall arresters including a flexible anchor line |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 354:2010 Personal fall protection equipment — Lanyards |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 355:2002 Personal protective equipment against falls from a height — Energy absorbers |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 358:1999 Personal protective equipment for work positioning and prevention of falls from a height — Belts for work positioning and restraint and work positioning lanyards |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 360:2002 Personal protective equipment against falls from a height — Retractable type fall arresters |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 361:2002 Personal protective equipment against falls from a height — Full body harnesses |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 362:2004 Personal protective equipment against falls from a height — Connectors |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 365:2004 Personal protective equipment against falls from a height — General requirements for instructions for use, maintenance, periodic examination, repair, marking and packaging |
21.4.2018 |
|
|
||||||||
|
|
EN 365:2004/AC:2006 |
|
|
|
||||||||
|
CEN |
EN ISO 374-1:2016 Protective gloves against dangerous chemicals and micro-organisms — Part 1: Terminology and performance requirements for chemical risks (ISO 374-1:2016) |
21.4.2018 |
|
|
||||||||
|
CEN |
EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms — Part 5: Terminology and performance requirements for micro-organisms risks (ISO 374-5:2016) |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 379:2003+A1:2009 Personal eye-protection — Automatic welding filters |
21.4.2018 |
EN 379:2003 Note 2.1 |
|
||||||||
|
CEN |
EN 381-5:1995 Protective clothing for users of hand-held chain saws — Part 5: Requirements for leg protectors |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 381-7:1999 Protective clothing for users of hand-held chainsaws — Part 7: Requirements for chainsaw protective gloves |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 381-9:1997 Protective clothing for users of hand-held chain saws — Part 9: Requirements for chain saw protective gaiters |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 381-11:2002 Protective clothing for users of hand-held chainsaws — Part 11: Requirements for upper body protectors |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 388:2016 Protective gloves against mechanical risks |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 397:2012+A1:2012 Industrial safety helmets |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 402:2003 Respiratory protective devices — Lung governed demand self-contained open-circuit compressed air breathing apparatus with full face mask or mouthpiece assembly for escape — Requirements, testing, marking |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 403:2004 Respiratory protective devices for self-rescue — Filtering devices with hood for escape from fire — Requirements, testing, marking |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 404:2005 Respiratory protective devices for self-rescue — Filter self-rescuer from carbon monoxide with mouthpiece assembly |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 405:2001+A1:2009 Respiratory protective devices — Valved filtering half masks to protect against gases or gases and particles — Requirements, testing, marking |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 407:2004 Protective gloves against thermal risks (heat and/or fire) |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 420:2003+A1:2009 Protective gloves — General requirements and test methods |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 421:2010 Protective gloves against ionizing radiation and radioactive contamination |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 443:2008 Helmets for fire fighting in buildings and other structures |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 469:2005 Protective clothing for firefighters — Performance requirements for protective clothing for firefighting activities |
21.4.2018 |
|
|
||||||||
|
|
EN 469:2005/A1:2006 |
21.4.2018 |
Note 3 |
|
||||||||
|
|
EN 469:2005/AC:2006 |
|
|
|
||||||||
|
CEN |
EN 511:2006 Protective gloves against cold |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 564:2014 Mountaineering equipment — Accessory cord — Safety requirements and test methods |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 565:2017 Mountaineering equipment — Tape — Safety requirements and test methods |
21.4.2018 |
EN 565:2006 Note 2.1 |
|
||||||||
|
CEN |
EN 566:2017 Mountaineering equipment — Slings — Safety requirements and test methods |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 567:2013 Mountaineering equipment — Rope clamps — Safety requirements and test methods |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 568:2015 Mountaineering equipment — Ice anchors — Safety requirements and test methods |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 569:2007 Mountaineering equipment — Pitons — Safety requirements and test methods |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 659:2003+A1:2008 Protective gloves for firefighters |
21.4.2018 |
|
|
||||||||
|
|
EN 659:2003+A1:2008/AC:2009 |
|
|
|
||||||||
|
CEN |
EN 795:2012 Personal fall protection equipment — Anchor devices |
21.4.2018 |
|
|
||||||||
|
Warning: This publication does not concern the equipment described in:
|
||||||||||||
|
(1) |
(2) |
(3) |
(4) |
(5) |
||||||||
|
CEN |
EN 812:2012 Industrial bump caps |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 813:2008 Personal fall protection equipment — Sit harnesses |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 943-1:2015 Protective clothing against dangerous solid, liquid and gaseous chemicals, including liquid and solid aerosols — Part 1: Performance requirements for Type 1 (gas-tight) chemical protective suits |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 958:2017 Mountaineering equipment — Energy absorbing systems for use in klettersteig (via ferrata) climbing — Safety requirements and test methods |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 966:2012+A1:2012 Helmets for airborne sports |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 1073-2:2002 Protective clothing against radioactive contamination — Part 2: Requirements and test methods for non-ventilated protective clothing against particulate radioactive contamination |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 1077:2007 Helmets for alpine skiers and snowboarders |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 1078:2012+A1:2012 Helmets for pedal cyclists and for users of skateboards and roller skates |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 1080:2013 Impact protection helmets for young children |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 1082-1:1996 Protective clothing — Gloves and arm guards protecting against cuts and stabs by hand knives — Part 1: Chain mail gloves and arm guards |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 1082-2:2000 Protective clothing — Gloves and arm guards protecting against cuts and stabs by hand knives — Part 2: Gloves and arm guards made of material other than chain mail |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 1146:2005 Respiratory protective devices — Self-contained open-circuit compressed air breathing apparatus incorporating a hood for escape — Requirements, testing, marking |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 1149-5:2008 Protective clothing — Electrostatic properties — Part 5: Material performance and design requirements |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 1150:1999 Protective clothing — Visibility clothing for non-professional use — Test methods and requirements |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 1385:2012 Helmets for canoeing and white water sports |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 1486:2007 Protective clothing for fire-fighters — Test methods and requirements for reflective clothing for specialised fire-fighting |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 1497:2007 Personal fall protection equipment — Rescue harnesses |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 1731:2006 Personal eye protection — Mesh eye and face protectors |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 1827:1999+A1:2009 Respiratory protective devices — Half masks without inhalation valves and with separable filters to protect against gases or gases and particles or particles only — Requirements, testing, marking |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 1891:1998 Personal protective equipment for the prevention of falls from a height — Low stretch kernmantel ropes |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 1938:2010 Personal eye protection — Goggles for motorcycle and moped users |
21.4.2018 |
|
|
||||||||
|
CEN |
EN ISO 10819:2013 Mechanical vibration and shock — Hand-arm vibration — Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand (ISO 10819:2013) |
21.4.2018 |
|
|
||||||||
|
CEN |
EN ISO 10862:2009 Small craft — Quick release system for trapeze harness (ISO 10862:2009) |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 12021:2014 Respiratory equipment — Compressed gases for breathing apparatus |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 12083:1998 Respiratory protective devices — Filters with breathing hoses, (Non-mask mounted filters) — Particle filters, gas filters, and combined filters — Requirements, testing, marking |
21.4.2018 |
|
|
||||||||
|
|
EN 12083:1998/AC:2000 |
|
|
|
||||||||
|
CEN |
EN 12270:2013 Mountaineering equipment — Chocks — Safety requirements and test methods |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 12275:2013 Mountaineering equipment — Connectors — Safety requirements and test methods |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 12276:2013 Mountaineering equipment — Frictional anchors — Safety requirements and test methods |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 12277:2015 Mountaineering equipment — Harnesses — Safety requirements and test methods |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 12278:2007 Montaineering equipment — Pulleys — Safety requirements and test methods |
21.4.2018 |
|
|
||||||||
|
CEN |
EN ISO 12312-1:2013 Eye and face protection — Sunglasses and related eyewear — Part 1: Sunglasses for general use (ISO 12312-1:2013) |
21.4.2018 |
|
|
||||||||
|
|
EN ISO 12312-1:2013/A1:2015 |
21.4.2018 |
Note 3 |
|
||||||||
|
CEN |
EN ISO 12312-2:2015 Eye and face protection — Sunglasses and related eyewear — Part 2: Filters for direct observation of the sun (ISO 12312-2:2015) |
21.4.2018 |
|
|
||||||||
|
CEN |
EN ISO 12401:2009 Small craft — Deck safety harness and safety line — Safety requirements and test methods (ISO 12401:2009) |
21.4.2018 |
|
|
||||||||
|
CEN |
EN ISO 12402-5:2006 Personal flotation devices — Part 5: Buoyancy aids (level 50) — Safety requirements (ISO 12402-5:2006) |
21.4.2018 |
|
|
||||||||
|
|
EN ISO 12402-5:2006/AC:2006 |
|
|
|
||||||||
|
|
EN ISO 12402-5:2006/A1:2010 |
21.4.2018 |
Note 3 |
|
||||||||
|
CEN |
EN ISO 12402-6:2006 Personal flotation devices — Part 6: Special purpose lifejackets and buoyancy aids — Safety requirements and additional test methods (ISO 12402-6:2006) |
21.4.2018 |
|
|
||||||||
|
|
EN ISO 12402-6:2006/A1:2010 |
21.4.2018 |
Note 3 |
|
||||||||
|
CEN |
EN ISO 12402-8:2006 Personal flotation devices — Part 8: Accessories — Safety requirements and test methods (ISO 12402-8:2006) |
21.4.2018 |
|
|
||||||||
|
|
EN ISO 12402-8:2006/A1:2011 |
21.4.2018 |
Note 3 |
|
||||||||
|
CEN |
EN 12477:2001 Protective gloves for welders |
21.4.2018 |
|
|
||||||||
|
|
EN 12477:2001/A1:2005 |
21.4.2018 |
Note 3 |
|
||||||||
|
CEN |
EN 12492:2012 Mountaineering equipment — Helmets for mountaineers — Safety requirements and test methods |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 12841:2006 Personal fall protection equipment — Rope access systems — Rope adjustment devices |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 12941:1998 Respiratory protective devices — Powered filtering devices incorporating a helmet or a hood — Requirements, testing, marking |
21.4.2018 |
|
|
||||||||
|
|
EN 12941:1998/A1:2003 |
21.4.2018 |
Note 3 |
|
||||||||
|
|
EN 12941:1998/A2:2008 |
21.4.2018 |
Note 3 |
|
||||||||
|
CEN |
EN 12942:1998 Respiratory protective devices — Power assisted filtering devices incorporating full face masks, half masks or quarter masks — Requirements, testing, marking |
21.4.2018 |
|
|
||||||||
|
|
EN 12942:1998/A1:2002 |
21.4.2018 |
Note 3 |
|
||||||||
|
|
EN 12942:1998/A2:2008 |
21.4.2018 |
Note 3 |
|
||||||||
|
CEN |
EN 13034:2005+A1:2009 Protective clothing against liquid chemicals — Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals (Type 6 and Type PB [6] equipment) |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 13061:2009 Protective clothing — Shin guards for association football players — Requirements and test methods |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 13158:2018 Protective clothing — Protective jackets, body and shoulder protectors for equestrian use, for horse riders and those working with horses, and for horse drivers — Requirements and test methods |
This is the first publication |
EN 13158:2009 Note 2.1 |
31.8.2018 |
||||||||
|
CEN |
EN 13178:2000 Personal eye-protection — Eye protectors for snowmobile users |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 13277-1:2000 Protective equipment for martial arts — Part 1: General requirements and test methods |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 13277-2:2000 Protective equipment for martial arts — Part 2: Additional requirements and test methods for instep protectors, shin protectors and forearm protectors |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 13277-3:2013 Protective equipment for martial arts — Part 3: Additional requirements and test methods for trunk protectors |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 13277-4:2001 Protective equipment for martial arts — Part 4: Additional requirements and test methods for head protectors |
21.4.2018 |
|
|
||||||||
|
|
EN 13277-4:2001/A1:2007 |
21.4.2018 |
Note 3 |
|
||||||||
|
CEN |
EN 13277-5:2002 Protective equipment for martial arts — Part 5: Additional requirements and test methods for genital protectors and abdominal protectors |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 13277-6:2003 Protective equipment for martial arts — Part 6: Additional requirements and test methods for breast protectors for females |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 13277-7:2009 Protective equipment for martial arts — Part 7: Additional requirements and test methods for hand and foot protectors |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 13277-8:2017 Protective equipment for martial arts — Part 8: Additional requirements and test methods for karate face protectors |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 13356:2001 Visibility accessories for non-professional use — Test methods and requirements |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 13484:2012 Helmets for users of luges |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 13546:2002+A1:2007 Protective clothing — Hand, arm, chest, abdomen, leg, foot and genital protectors for field hockey goal keepers, and shin protectors for field players — Requirements and test methods |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 13567:2002+A1:2007 Protective clothing — Hand, arm, chest, abdomen, leg, genital and face protectors for fencers — Requirements and test methods |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 13594:2015 Protective gloves for motorcycle riders — Requirements and test methods |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 13595-1:2002 Protective clothing for professional motorcycle riders — Jackets, trousers and one piece or divided suits — Part 1: General requirements |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 13595-3:2002 Protective clothing for professional motorcycle riders — Jackets, trousers and one-piece or divided suits — Part 3: Test method for determination of burst strength |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 13634:2017 Protective footwear for motorcycle riders — Requirements and test methods |
21.4.2018 |
|
|
||||||||
|
CEN |
EN ISO 13688:2013 Protective clothing — General requirements (ISO 13688:2013) |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 13781:2012 Protective helmets for drivers and passengers of snowmobiles and bobsleighs |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 13794:2002 Respiratory protective devices — Self-contained closed-circuit breathing apparatus for escape — Requirements, testing, marking |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 13832-2:2006 Footwear protecting against chemicals — Part 2: Requirements for footwear resistant to chemicals under laboratory conditions |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 13832-3:2006 Footwear protecting against chemicals — Part 3: Requirements for footwear highly resistant to chemicals under laboratory conditions |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 13949:2003 Respiratory equipment — Open-circuit self-contained diving apparatus for use with compressed Nitrox and oxygen — Requirements, testing, marking |
21.4.2018 |
|
|
||||||||
|
CEN |
EN ISO 13982-1:2004 Protective clothing for use against solid particulates — Part 1: Performance requirements for chemical protective clothing providing protection to the full body against airborne solid particulates (type 5 clothing) (ISO 13982-1:2004) |
21.4.2018 |
|
|
||||||||
|
|
EN ISO 13982-1:2004/A1:2010 |
21.4.2018 |
Note 3 |
|
||||||||
|
CEN |
EN ISO 13998:2003 Protective clothing — Aprons, trousers and vests protecting against cuts and stabs by hand knives (ISO 13998:2003) |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 14021:2003 Stone shields for off-road motorcycling suited to protect riders against stones and debris — Requirements and test methods |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 14052:2012+A1:2012 High performance industrial helmets |
21.4.2018 |
EN 14052:2012 Note 2.1 |
|
||||||||
|
CEN |
EN 14058:2017 Protective clothing — Garments for protection against cool environments |
21.4.2018 |
EN 14058:2004 Note 2.1 |
|
||||||||
|
CEN |
EN 14120:2003+A1:2007 Protective clothing — Wrist, palm, knee and elbow protectors for users of roller sports equipment — Requirements and test methods |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 14126:2003 Protective clothing — Performance requirements and tests methods for protective clothing against infective agents |
21.4.2018 |
|
|
||||||||
|
|
EN 14126:2003/AC:2004 |
|
|
|
||||||||
|
CEN |
EN 14143:2013 Respiratory equipment — Self-contained re-breathing diving apparatus |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 14225-1:2017 Diving suits — Part 1: Wet suits — Requirements and test methods |
21.4.2018 |
EN 14225-1:2005 Note 2.1 |
|
||||||||
|
CEN |
EN 14225-2:2017 Diving suits — Part 2: Dry suits — Requirements and test methods |
21.4.2018 |
EN 14225-2:2005 Note 2.1 |
|
||||||||
|
CEN |
EN 14225-3:2017 Diving suits — Part 3: Actively heated or cooled suit systems and components — Requirements and test methods |
21.4.2018 |
EN 14225-3:2005 Note 2.1 |
|
||||||||
|
CEN |
EN 14328:2005 Protective clothing — Gloves and armguards protecting against cuts by powered knives — Requirements and test methods |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 14387:2004+A1:2008 Respiratory protective devices — Gas filter(s) and combined filter(s) — Requirements, testing, marking |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 14435:2004 Respiratory protective devices — Self-contained open-circuit compressed air breathing apparatus with half mask designed to be used with positive pressure only — Requirements, testing, marking |
21.4.2018 |
|
|
||||||||
|
CEN |
EN ISO 14460:1999 Protective clothing for automobile racing drivers — Protection against heat and flame — Performance requirements and test methods (ISO 14460:1999) |
21.4.2018 |
|
|
||||||||
|
|
EN ISO 14460:1999/A1:2002 |
21.4.2018 |
Note 3 |
|
||||||||
|
|
EN ISO 14460:1999/AC:1999 |
|
|
|
||||||||
|
CEN |
EN 14529:2005 Respiratory protective devices — Self-contained open-circuit compressed air breathing apparatus with half mask designed to include a positive pressure lung governed demand valve for escape purposes only |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 14593-1:2005 Respiratory protective devices — Compressed air line breathing apparatus with demand valve — Part 1: Apparatus with a full face mask — Requirements, testing, marking |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 14594:2005 Respiratory protective devices — Continuous flow compressed air line breathing apparatus — Requirements, testing, marking |
21.4.2018 |
|
|
||||||||
|
|
EN 14594:2005/AC:2005 |
|
|
|
||||||||
|
CEN |
EN 14605:2005+A1:2009 Protective clothing against liquid chemicals — performance requirements for clothing with liquid-tight (Type 3) or spray-tight (Type 4) connections, including items providing protection to parts of the body only (Types PB [3] and PB [4]) |
21.4.2018 |
|
|
||||||||
|
CEN |
EN ISO 14877:2002 Protective clothing for abrasive blasting operations using granular abrasives (ISO 14877:2002) |
21.4.2018 |
|
|
||||||||
|
CEN |
EN ISO 15027-1:2012 Immersion suits — Part 1: Constant wear suits, requirements including safety (ISO 15027-1:2012) |
21.4.2018 |
|
|
||||||||
|
CEN |
EN ISO 15027-2:2012 Immersion suits — Part 2: Abandonment suits, requirements including safety (ISO 15027-2:2012) |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 15090:2012 Footwear for firefighters |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 15151-1:2012 Mountaineering equipment — Braking devices — Part 1: Braking devices with manually assisted locking, safety requirements and test methods |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 15333-1:2008 Respiratory equipment — Open-circuit umbilical supplied compressed gas diving apparatus — Part 1: Demand apparatus |
21.4.2018 |
|
|
||||||||
|
|
EN 15333-1:2008/AC:2009 |
|
|
|
||||||||
|
CEN |
EN 15333-2:2009 Respiratory equipment — Open-circuit umbilical supplied compressed gas diving apparatus — Part 2: Free flow apparatus |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 15613:2008 Knee and elbow protectors for indoor sports — Safety requirements and test methods |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 16027:2011 Protective clothing — Gloves with protective effect for association football goal keepers |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 16350:2014 Protective gloves — Electrostatic properties |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 16473:2014 Firefighters helmets — Helmets for technical rescue |
21.4.2018 |
|
|
||||||||
|
CEN |
EN 16716:2017 Mountaineering equipment — Avalanche airbag systems — Safety requirements and test methods |
21.4.2018 |
|
|
||||||||
|
CEN |
EN ISO 17249:2013 Safety footwear with resistance to chain saw cutting (ISO 17249:2013) |
21.4.2018 |
|
|
||||||||
|
|
EN ISO 17249:2013/AC:2014 |
|
|
|
||||||||
|
CEN |
EN ISO 20345:2011 Personal protective equipment — Safety footwear (ISO 20345:2011) |
21.4.2018 |
|
|
||||||||
|
CEN |
EN ISO 20346:2014 Personal protective equipment — Protective footwear (ISO 20346:2014) |
21.4.2018 |
|
|
||||||||
|
CEN |
EN ISO 20347:2012 Personal protective equipment — Occupational footwear (ISO 20347:2012) |
21.4.2018 |
|
|
||||||||
|
CEN |
EN ISO 20471:2013 High visibility clothing — Test methods and requirements (ISO 20471:2013, Corrected version 2013-06-01) |
21.4.2018 |
|
|
||||||||
|
|
EN ISO 20471:2013/A1:2016 |
21.4.2018 |
Note 3 |
|
||||||||
|
CEN |
EN ISO 27065:2017 Protective clothing — Performance requirements for protective clothing worn by operators applying pesticides and for re-entry workers (ISO 27065:2017) |
21.4.2018 |
|
|
||||||||
|
Cenelec |
EN 50321-1:2018 Live working — Footwear for electrical protection — Insulating footwear and overboots |
This is the first publication |
|
|
||||||||
|
Note 0: |
This is the date from which compliance with the harmonised standard or parts thereof confers a presumption of conformity with the relevant requirements of Union legislation |
|
Note 1: |
Generally the date of cessation of presumption of conformity will be the date of withdrawal (‘dow’), set by the European standardisation organisation, but attention of users of these standards is drawn to the fact that in certain exceptional cases this can be otherwise. |
|
Note 2.1: |
The new (or amended) standard has the same scope as the superseded standard. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
|
Note 2.2: |
The new standard has a broader scope than the superseded standard. On the date stated the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
|
Note 2.3: |
The new standard has a narrower scope than the superseded standard. On the date stated the (partially) superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation for those products or services that fall within the scope of the new standard. Presumption of conformity with the essential or other requirements of the relevant Union legislation for products or services that still fall within the scope of the (partially) superseded standard, but that do not fall within the scope of the new standard, is unaffected. |
|
Note 3: |
In case of amendments, the referenced standard is EN CCCCC:YYYY, its previous amendments, if any, and the new, quoted amendment. |
NOTE:
|
— |
Any information concerning the availability of the standards can be obtained either from the European standardisation organisations or from the national standardisation bodies the list of which is published in the Official Journal of the European Union according to Article 27 of the Regulation (EU) No 1025/2012 (2). |
|
— |
Standards are adopted by the European standardisation organisations in English (CEN and Cenelec also publish in French and German). Subsequently, the titles of the standards are translated into all other required official languages of the European Union by the national standardisation bodies. The European Commission is not responsible for the correctness of the titles which have been presented for publication in the Official Journal. |
|
— |
References to Corrigenda ‘…/AC:YYYY’ are published for information only. A Corrigendum removes printing, linguistic or similar errors from the text of a standard and may relate to one or more language versions (English, French and/or German) of a standard as adopted by a European standardisation organisation. |
|
— |
Publication of the references in the Official Journal of the European Union does not imply that the standards are available in all the official languages of the European Union. |
|
— |
This list replaces all the previous lists published in the Official Journal of the European Union. The European Commission ensures the updating of this list. |
|
— |
More information about harmonised standards and other European standards on the Internet at http://ec.europa.eu/growth/single-market/european-standards/harmonised-standards/index_en.htm |
(1) ESO: European standardisation organisation:
|
— |
CEN: Rue de la Science 23, 1040 Brussels, Belgium, Tel. +32 25500811; Fax: +32 25500819 (http://www.cen.eu) |
|
— |
CENELEC: Rue de la Science 23, 1040 Brussels, Belgium, Tel. +32 25500811; Fax: +32 25500819 (http://www.cenelec.eu) |
|
— |
ETSI: 650, route des Lucioles, 06921 Sophia Antipolis, France, Tel. +33 492944200; Fax +33 493654716 (http://www.etsi.eu) |
(2) OJ C 338, 27.9.2014, p. 31.
