This document is an excerpt from the EUR-Lex website
Document 32026R2511
Commission Implementing Regulation (EU) 2026/2511 of 12 November 2026 granting a Union authorisation for the biocidal product family Hydrogen Peroxide based family – CID LINES NV in accordance with Regulation (EU) No 528/2012 of the European Parliament and of the Council
Commission Implementing Regulation (EU) 2026/2511 of 12 November 2026 granting a Union authorisation for the biocidal product family Hydrogen Peroxide based family – CID LINES NV in accordance with Regulation (EU) No 528/2012 of the European Parliament and of the Council
Commission Implementing Regulation (EU) 2026/2511 of 12 November 2026 granting a Union authorisation for the biocidal product family Hydrogen Peroxide based family – CID LINES NV in accordance with Regulation (EU) No 528/2012 of the European Parliament and of the Council
C/2026/7962
OJ L, 2026/2511, , ELI: http://data.europa.eu/eli/reg_impl/2026/2511/oj (BG, ES, CS, DA, DE, ET, EL, EN, FR, GA, HR, IT, LV, LT, HU, MT, NL, PL, PT, RO, SK, SL, FI, SV)
Date of entry into force unknown (pending notification) or not yet in force., Date of effect: 03/12/2026
|
Official Journal |
EN L series |
|
2026/2511 |
13.11.2026 |
COMMISSION IMPLEMENTING REGULATION (EU) 2026/2511
of 12 November 2026
granting a Union authorisation for the biocidal product family ‘Hydrogen Peroxide based family – CID LINES NV’ in accordance with Regulation (EU) No 528/2012 of the European Parliament and of the Council
(Text with EEA relevance)
THE EUROPEAN COMMISSION,
Having regard to the Treaty on the Functioning of the European Union,
Having regard to Regulation (EU) No 528/2012 of the European Parliament and of the Council of 22 May 2012 concerning the making available on the market and use of biocidal products (1), and in particular Article 44(5), first subparagraph, thereof,
Whereas:
|
(1) |
On 12 January 2017, CID LINES NV submitted an application to the European Chemicals Agency (‘the Agency’) in accordance with Article 43(1) of Regulation (EU) No 528/2012 for Union authorisation of a biocidal product family named ‘Hydrogen Peroxide based family – CID LINES NV’ of product-types 2 and 4, as described in Annex V to that Regulation, providing written confirmation that the competent authority of the Netherlands had agreed to evaluate the application. The application was recorded under case number BC-RH028870-34 in the Register for Biocidal Products. |
|
(2) |
‘Hydrogen Peroxide based family – CID LINES NV’ contains hydrogen peroxide as the active substance, included in the Union list of approved active substances referred to in Article 9(2) of Regulation (EU) No 528/2012 for product-types 2 and 4. |
|
(3) |
On 6 June 2025, the evaluating competent authority submitted, in accordance with Article 44(1) of Regulation (EU) No 528/2012, an assessment report and the conclusions of its evaluation to the Agency. |
|
(4) |
On 18 December 2025, the Agency submitted to the Commission its opinion (2), the draft summary of product characteristics (‘SPC’) of ‘Hydrogen Peroxide based family – CID LINES NV’ and the final assessment report on the biocidal product family, in accordance with Article 44(3) of Regulation (EU) No 528/2012. |
|
(5) |
The opinion concludes that ‘Hydrogen Peroxide based family – CID LINES NV’ is a biocidal product family within the meaning of Article 3(1), point (s), of Regulation (EU) No 528/2012, that it is eligible for Union authorisation in accordance with Article 42(1) of that Regulation and that, subject to compliance with the draft SPC, it meets the conditions laid down in Article 19(6) of that Regulation. |
|
(6) |
On 9 January 2026, the Agency transmitted to the Commission the draft SPC in all the official languages of the Union in accordance with Article 44(4) of Regulation (EU) No 528/2012. |
|
(7) |
The Commission concurs with the opinion of the Agency and considers it therefore appropriate to grant a Union authorisation for ‘Hydrogen Peroxide based family – CID LINES NV’ for the uses proposed to be authorised by the Agency. |
|
(8) |
The measures provided for in this Regulation are in accordance with the opinion of the Standing Committee on Biocidal Products, |
HAS ADOPTED THIS REGULATION:
Article 1
A Union authorisation with authorisation number EU-0036243-0000 is hereby granted to CID LINES NV for the making available on the market and use of the biocidal product family ‘Hydrogen Peroxide based family – CID LINES NV’ in accordance with the summary of product characteristics set out in the Annex.
The Union authorisation is valid from 3 December 2026 until 30 November 2036.
Article 2
This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.
This Regulation shall be binding in its entirety and directly applicable in all Member States.
Done at Brussels, 12 November 2026.
For the Commission
The President
Ursula VON DER LEYEN
(1) OJ L 167, 27.6.2012, p. 1. ELI: http://data.europa.eu/eli/reg/2012/528/oj.
(2) ECHA opinion of 27 November 2025 on the Union authorisation of ‘Hydrogen Peroxide based family – CID LINES NV’ (ECHA/BPC/512/2025), https://echa.europa.eu/opinions-on-union-authorisation.
ANNEX
SUMMARY OF PRODUCT CHARACTERISTICS FOR A BIOCIDAL PRODUCT FAMILY
Hydrogen Peroxide based family – CID LINES NV
Product type(s)
PT04: Food and feed area
PT02: Disinfectants and algaecides not intended for direct application to humans or animals
Authorisation number
EU-0036243-0000
R4BP asset number
EU-0036243-0000
PART I
FIRST INFORMATION LEVEL
1. ADMINISTRATIVE INFORMATION
1.1. Family name
|
Name |
Hydrogen Peroxide based family –CID LINES NV |
1.2. Product type(s)
|
Product type(s) |
PT04: Food and feed area PT02: Disinfectants and algaecides not intended for direct application to humans or animals |
1.3. Authorisation holder
|
Name and address of the authorisation holder |
Name |
CID LINES NV |
|
Address |
Waterpoortstraat 2 8900 Ieper BE |
|
|
Authorisation number |
|
EU-0036243-0000 |
|
R4BP asset number |
|
EU-0036243-0000 |
|
Date of the authorisation |
|
3 December 2026 |
|
Expiry date of the authorisation |
|
30 November 2036 |
1.4. Manufacturer(s) of the product
|
Name of manufacturer |
CID LINES NV |
|
Address of manufacturer |
Waterpoortstraat 2 8900 Ieper Belgium |
|
Location of manufacturing sites |
CID LINES NV site 1 Waterpoortstraat 2 8900 Ieper Belgium |
|
|
|
|
Name of manufacturer |
Ecolab Europe GmbH |
|
Address of manufacturer |
Hofwiesenstrasse 349 8050 Zürich Switzerland |
|
Location of manufacturing sites |
LABORATOIRES ANIOS 3330 Rue de Lille, 59262 Sainghin en Mélantois France Ecolab Production France SAS BP509, Avenue de Général Patton, 51000 Châlons-en-Champagne France SOLUSCOPE Rue du Fauge 100, ZI Les Paluds, 13400 Aubagne France Ecolab Rozzano, Italy Via A. Grandi 9/11, 20089 Rozzano Italy NALCO ITALIANA MANUFACTURING SRL Via Vernea 99, 10042 Nichelino Italy NUOVA FARMEC SRL Via W. Flemming 7, 37026 Settimo di Pescantina (Verona) Italy Ecolab Mandra, Greece Ecolab Athinon - Thivon old National Rd. (25th KM), 19600 Mandra - Attica Greece Ecolab Weavergate Winnington Avenue CW8 3AA Northwich, Cheshire United Kingdom of Great Britain and Northern Ireland (the) Techtex Units 7&8 Rhodes Business Park Silburn Way Middleton, M24 4NE Manchester United Kingdom of Great Britain and Northern Ireland (the) Ecolab Limited, Baglan ECOLAB CONTAMINATION CONTROL - Baglan Energy Park, Lot 7, Brunel Way, SA11 2G Neath United Kingdom of Great Britain and Northern Ireland (the) Ecolab Bioquell 52 Royce Close, SP10 3TS Portway, Andover Hampshire United Kingdom of Great Britain and Northern Ireland (the) Ecolab B.V.B.A. Industriezone Ravenshout 4, 3980 Tessenderlo Belgium Nalco Deutschland Manufacturing GmbH und Co.KG Justus-von-Liebig-Str. 11, D-64584 Biebesheim Germany Ecolab Engineering GmbH Raiffeisenstrasse 7, 88313 Siegsdorf Germany Ecolab Mullingar, Ireland Central Forest Park. Zone C - Mullingar Business Park, N91 E1WD Mullingar, Co. Westmeath Ireland Ecolab d.o.o. Vajngerlova 4, 2000 Maribor Slovenia Nalco Española Manufacturing, SLU C/ Tramuntana s/n, Polígon Industrial Celrà, 17460 Girona Spain NALCO FINLAND MANUFACTURING OY Kivikummuntie 1, FIN-07955 Tesjoki Finland BRENNTAG Nordic, Vejle Strandgade 35, 7100 Vejle Denmark BRENNTAG Nordic, Haslev Høsten Teglværksvej 47, 4690 Haslev Denmark BRENNTAG Nordic, Ballerup Borupvang 5B, 2750 Ballerup Denmark BRENNTAG NORDIC A/S , Grålum Kalnesveien 1, 1712 Grålum Norway BRENNTAG NORDIC A/S , Borås Vevgatan 2, 504 64 Borås Sweden BRENNTAG NORDIC A/S, Frövi Norra Bangatan 38, 718 32 Frövi Sweden BRENNTAG NORDIC A/S, Kalmar Lotsgatan 1, 392 31 Kalmar Sweden Brenntag GmbH, Duisburg Am Röhrenwerk 46, 47259 Duisburg Germany Brenntag GmbH, Essen Messeallee 11, 45131 Essen Germany Brenntag GmbH, Frankfurt Carl-Benz-Str. 8, 60314 Frankfurt am Main Germany BRENNTAG GmbH, Glauchau Boschstr. 3, 08371 Glauchau Germany BRENNTAG GmbH, Hamburg Hannoversche Str. 40, 21079 Hamburg Germany BRENNTAG GmbH, Heilbronn Dieselstr. 5, 74076 Heilbronn Germany BRENNTAG GmbH, Kaiserslautern Merkurstr. 47, 67663 Kaiserslautern Germany Brenntag GmbH, Lohfelden Am Fieseler Werk 9, 34253 Lohfelden Germany Brenntag GmbH, München Rupert-Bodner-Str. 20, 81245 München Germany Brenntag GmbH, Plochingen Am Nordseekai 22, 73207 Plochingen Germany Brenntag GmbH, Ulm Magirus-Deutz-Str. 12, 89077 Ulm Germany Brenntag Poland, Góra ul. Pijarska 1, 05-530 Góra Kalwaria Poland Brenntag Poland, Jankowice Przemysłowa 2, 62-080 Jankowice Poland Brenntag Poland, Kędzierzyn-Koźle Józefa Bema 21, 47-224 Kędzierzyn-Koźle Poland Brenntag Poland, Zgierz ul. Kwasowa 5, 95-100 Zgierz Poland Brenntag Poland, Chropyně Komenského 75, 768 11 Chropyně Czechia Brenntag Poland, Počernice Mezi úvozy 1850/1, 193 00 Praha 9-Horní Počernice Czechia Brenntag Poland, Budapest Bányalég u. 45, 1225 Budapest Hungary Brenntag Poland, Com.Chiajna, Jud.Ilfov Str Garii Nr 2 BIS, 77040 Com.Chiajna, Jud.Ilfov Romania Brenntag SRL, Chiajna Drumul Gării 1, 077040 Chiajna Romania Brenntag Poland, Pezinok Glejovka 15, 902 03 Pezinok Slovakia Brenntag GmbH, Basel Elsässerstrasse 231, 4056 Basel Switzerland BRENNTAG CEE - Guntramsdorf Bahnstr. 13, 2353 Guntramsdorf Austria BRENNTAG Normandy 12 Sente des Jumelles - BP 11, 76710 Montville France A.F.P GmbH Otto-Brenner-Straße 16-18, 21337 Lüneburg Germany Alcochem Minerals B.V. Zeilmaker 4, 3861 SM Nijkerk Netherlands (the) FAREVA ARDEPHARM, Tournon 1041 Chemin de la digue du Rhône, 07300 Tournon-sur-Rhône France FAREVA Interfill LLC, Tosno Moskovskoye Chausse 1, 187000 Tosno Russian Federation (the) CHRISTEYNS NV, Bradford Rutland St, BD4 7EA, Bradford United Kingdom of Great Britain and Northern Ireland (the) CHRISTEYNS NV, Warrington 2 Cameron Court, WA2 8RE Warrington United Kingdom of Great Britain and Northern Ireland (the) DAN-MOR Natural Products and Chemicals Ltd 29 Hailan St., Or Akiva Industrial Zone, 3060000 Israel Farmak Moravia a.s. Na Vlčinci 16/3, 779 00 Olomouc Czechia F.E.L.T. 10 Rue du Vertuquet, 59960 Neuville-en-Ferrain France Ferdinand Eimermacher GmbH &Co.KG Westring 24, 48356 Nordwalde Germany GANDAE Gaardeniersweg 2, 9000 Gent Belgium HYDRACHEM LTD Unit 16 Gillmans Industrial Estate, Natts Lane, RH14 9EZ Billingshurst United Kingdom of Great Britain and Northern Ireland (the) INNOVATE GmbH Gewerbegebietsstraße 30, 06618 Schönburg Germany Jago Pro Szczakowska 35, 43-600 Jaworzno Poland KEMVIT OY Bastintie 303, 68410 Alaveteli Finland KOMPAK NEDERLAND BV Munnikenheiweg 63, 4879 NE Etten-Leur Netherlands (the) La Antigua Lavandera SL Carretera Sevilla Alcala 75, 41500 Alcala DE Guadaira (Sevilla) Spain LICHTENHELDT GmbH Industriestr. 7 – 11, 23812 Wahlstedt bei Bad Segeberg Germany MKS GMBH & CO Am Ockenheimer Graben 43, 55411 Bingen am Rhein Germany PAL INTERNATIONAL LTD Bilton Way, LE17 4JA Lutterworth United Kingdom of Great Britain and Northern Ireland (the) PENNWHITE LTD Aston Way, Midpoint 18 Business Park, CW10 0HS Middlewich United Kingdom of Great Britain and Northern Ireland (the) RNM PRODUCTOS QUIMICOS Avenida das Searas, no 132, 4770-329 Landim Portugal RUTPEN LTD Membury Airfield, RG17 7TJ Lambourn United Kingdom of Great Britain and Northern Ireland (the) Solimix Montseny 17-19 Pol. Ind. Sant Pere Molanta, 08799 Olerdola, Barcelona Spain Staub & Co. GmbH M Industriestraße 3, 86456 Gablingen Germany TECHNIKRAFT LTD Britannia Road, DN14 6ET Goole United Kingdom of Great Britain and Northern Ireland (the) VAN DAM BODEGRAVEN BV Zeppelinstraße 12, 45470 Mülheim an der Ruhr Germany VARENNE LABORATOIRE 2 Rue du Château, 60126 Rivecourt France Evonik Peroxid GmbH Fabrikstraße 1, 9721 Weißenstein ob der Drau Austria BELINKA-Ljubljana Zasavska Cesta 95, 1231 Ljubljana Slovenia Budich International GmbH Dieselstrasse 10, 32120 Hiddenhause Germany Plum A/S Frederik Plums Vej 2, 5610 Assens Denmark |
1.5 Manufacturer(s) of the active substance(s)
|
Active substance |
Hydrogen peroxide |
|
Name of manufacturer |
Evonik Degussa Antwerpen NV |
|
Address of manufacturer |
Tijsmanstunnel West 2040 Antwerpen Belgium |
|
Location of manufacturing sites |
Evonik Degussa Antwerpen NV site 1 Tijsmanstunnel West 2040 Antwerpen Belgium |
|
|
|
|
Active substance |
Hydrogen peroxide |
|
Name of manufacturer |
Solvay |
|
Address of manufacturer |
Rue de Ransbeek 310 1120 Brussels Belgium |
|
Location of manufacturing sites |
Solvay site 1 Solvay Interox Limited, Baronet Road, Solvay House, Warrington WA4 6HA Cheshire United Kingdom of Great Britain and Northern Ireland (the) Solvay site 2 Solvay Chemicals Finland Oy, YRJONOJANTIE 2 45910 VOIKKAA Finland Solvay site 3 Solvay Chemicals GmbH Germany,KOETHENSCHE STRASSE 1-3 06406 DE BERNBURG Germany Solvay site 4 Solvay Chimica Italia SpA Italy, VIA PIAVE, 6 LI 57013 IT ROSIGNANO SOLVAY Italy Solvay site 5 Solvay Chemie SA Belgium, RUE SOLVAY, 39 5190 BE JEMEPPE-SUR-SAMBRE Belgium Solvay site 6 Solvay Interox Produtos Peroxidados SA, RUA ENG. 2625-106 CLEMENT DUMOULIN POVOA DE SANTA IRIA Portugal |
2 PRODUCT FAMILY COMPOSITION AND FORMULATION
2.1 Qualitative and quantitative information on the composition of the family
|
Common name |
IUPAC name |
Function |
CAS number |
EC number |
Content (%) |
|
Hydrogen peroxide |
|
Active substance |
7722-84-1 |
231-765-0 |
36,68 - 50,15 % (w/w) |
2.2 Type(s) of formulation
|
Formulation type(s) |
SL Soluble concentrate |
PART II
SECOND INFORMATION LEVEL META SPC(S)
1 META SPC 1 ADMINISTRATIVE INFORMATION
1.1 Meta SPC 1 identifier
|
Identifier |
Meta SPC: meta SPC 2 |
1.2 Suffix to the authorisation number
|
Number |
1-1 |
1.3 Product type(s)
|
Product type(s) |
PT04: Food and feed area PT02: Disinfectants and algaecides not intended for direct application to humans or animals |
2 META SPC 1 COMPOSITION
2.1 Qualitative and quantitative information on the composition of the meta SPC 1
|
Common name |
IUPAC name |
Function |
CAS number |
EC number |
Content (%) |
|
Hydrogen peroxide |
|
Active substance |
7722-84-1 |
231-765-0 |
50,15 - 50,15 % (w/w) |
2.2 Type(s) of formulation of the meta SPC 1
|
Formulation type(s) |
SL Soluble concentrate |
3. HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 1
|
Hazard statements |
H272: May intensify fire; oxidiser. H318: Causes serious eye damage. H302: Harmful if swallowed. H315: Causes skin irritation. H335: May cause respiratory irritation. H412: Harmful to aquatic life with long lasting effects. |
|
Precautionary statements |
P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P220: Keep away from clothing or other combustible materials. P261: Avoid breathing vapours. P264: Wash hands thoroughly after handling. P270: Do not eat, drink or smoke when using this product. P273: Avoid release to the environment. P280: Wear protective gloves, eye protection, face protection. P301+P312: IF SWALLOWED: Call a POISON CENTER or doctor if you feel unwell. P330: Rinse mouth. P302+P352: IF ON SKIN: Wash with plenty of water. P332+P313: If skin irritation occurs: Get medical advice. P332+P313: If skin irritation occurs: Get medical attention. P304+P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing. P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P310: Immediately call a POISON CENTER or doctor. P321: Specific treatment (see... on this label). P370+P378: In case of fire: Use water to extinguish. P362+P364: Take off contaminated clothing and wash it before reuse. P403+P233: Store in a well-ventilated place. Keep container tightly closed. P405: Store locked up. P501: Dispose of container hazardous or special waste collection point, in accordance with local, regional, national and/or international regulation. |
4 AUTHORISED USE(S) OF THE META SPC
4.1 Use description
Use # 2.1 – PT4 – Concentrated CIP disinfectants with circulation based on Hydrogen peroxide with post-rinsing
|
Product type |
PT04: Food and feed area |
|
Where relevant, an exact description of the authorised use |
- |
|
Target organism(s) (including development stage) |
Common name: Bacteria Common name: Yeasts |
|
Field(s) of use |
indoor use Disinfection of inner surfaces in food processing areas and food consumption areas (e.g. kitchens, canteens, restaurants), food production and processing industry areas, including food and feed silos. |
|
Application method(s) |
Method: (By CIP) Detailed description: / |
|
Application rate(s) and frequency |
The product shall be diluted to 5 % product (v/v). Number and timing of application: 1 to 2 applications per day |
|
Category(ies) of users |
professional |
|
Pack sizes and packaging material |
High-Density Polyethylene (HDPE) bottle: 1 L HDPE drum: 5 L, 10 L, 20 L, 25 L, 30 L, 60 L, 200 L HDPE container: 600 L, 1 000 L |
4.1.1 Use-specific instructions for use
The automated M&L has to be done with a connecting line, ensuring the packaging is either unopened or only briefly opened to do the connection and disconnection.
First clean thoroughly the inner surfaces of the food and feed area.
The product shall be diluted to 5 % product (v/v).
Let the diluted product circulate during minimum 60 minutes at a temperature above 40 °C. Rinse treated equipment/pipes/machinery with drinking water after application.
For professional use only. Do not mix with other chemicals.
4.1.2 Use-specific risk mitigation measures
During manual mixing and loading:
|
— |
Use of respiratory protective equipment (RPE) with APF 4 according to EN 405 or equivalent is mandatory. |
|
— |
Wear gloves according to EN374 or equivalent (glove material to be specified by the authorisation holder within the product information). |
|
— |
Wear chemical goggles according to EN166 or equivalent. |
|
— |
Wear a protective coverall (at least type 3 or 4, EN 14605 or equivalent) which is impermeable for the biocidal product (coverall material to be specified by the authorisation holder within the product information). |
|
— |
Ventilation rate of at least 3ACH is needed. |
|
— |
Re-entry is only permitted once the air concentration for hydrogen peroxide has dropped below 0,9 ppm (1,25 mg/m3) or relevant lower national reference value or if the professional user wears the same appropriate RPE as during the mixing and loading task. |
|
— |
During automated loading step: |
|
— |
Wear gloves according to EN374 or equivalent (glove material to be specified by the authorisation holder within the product information). |
|
— |
Wear chemical goggles according to EN166 or equivalent. |
|
— |
Wear a protective coverall (at least type 3 or 4, EN 14605 or equivalent) which is impermeable for the biocidal product (coverall material to be specified by the authorisation holder within the product information) |
|
— |
During cleaning and maintenance of equipment: |
|
— |
Wear gloves according to EN374 or equivalent (glove material to be specified by the authorisation holder within the product information). |
|
— |
Wear chemical goggles according to EN166 or equivalent. |
|
— |
Wear a protective coverall (at least type 3 or 4, EN 14605 or equivalent) which is impermeable for the biocidal product (coverall material to be specified by the authorisation holder within the product information). |
This is without prejudice to the application by employers of Council Directive 98/24/EC and other Union legislation in the area of health and safety at work. The full titles of the EN standards and reference to European law are available in Section 6
4.1.3 Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
IF INHALED: Move to fresh air and keep at rest in a position comfortable for breathing.
If symptoms: Call 112/ambulance for medical assistance.
If no symptoms: Call a POISON CENTRE or a doctor.
IF SWALLOWED: Immediately rinse mouth. Give something to drink, if exposed person is able to swallow. Do NOT induce vomiting. Call 112/ambulance for medical assistance.
IF ON SKIN: Immediately wash skin with plenty of water. Thereafter take off all contaminated clothing and wash it before reuse. Continue to wash the skin with water for 15 minutes. Call a POISON CENTRE or a doctor.
IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing for at least 15 minutes. Call 112/ambulance for medical assistance.
Information to Healthcare personnel/doctor:
The eyes should also be rinsed repeatedly on the way to the doctor if eye exposure to alkaline chemicals (pH > 11), amines and acids like acetic acid, formic acid or propionic acid.
4.1.4 Where specific to the use, the instructions for safe disposal of the product and its packaging
The packing and content must be eliminated as dangerous waste product under the whole responsibility of the possessor of this waste product. Do not throw wastes into sewers and watercourses. Dispose in a safe manner in accordance with local/national regulations.
4.1.5 Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
Keep only in the original container in a cool, well-ventilated place. Keep container closed when not in use.
Protect from frost. Store at temperatures not exceeding 40 °C. Protect from direct sunlight.
The shelf-life of the products is 3 years.
4.2 Use description
Use # 2.2 – PT4 – Concentrated CIP disinfectants with circulation based on Hydrogen peroxide with prior cleaning
|
Product type |
PT04: Food and feed area |
|
Where relevant, an exact description of the authorised use |
- |
|
Target organism(s) (including development stage) |
Common name: bacteria Common name: yeasts |
|
Field(s) of use |
indoor use Disinfection of inner surfaces in food processing areas and food consumption areas (e.g. kitchens, canteens, restaurants), food production and processing industry areas, including food and feed silos. |
|
Application method(s) |
Method: By CIP Detailed description: / |
|
Application rate(s) and frequency |
The product shall be diluted to 5 % product (v/v). Number and timing of application: 1 to 2 applications per day |
|
Category(ies) of users |
professional |
|
Pack sizes and packaging material |
HDPE bottle: 1 L HDPE drum: 5 L, 10 L, 20 L, 25 L, 30 L, 60 L, 200 L HDPE container: 600 L, 1 000 L |
4.2.1 Use-specific instructions for use
The automated M&L has to be done with a connecting line, ensuring the packaging is either unopened or only briefly opened to do the connection and disconnection
First clean thoroughly the inner surfaces of the food and feed area.
The product shall be diluted to 5 % product (v/v).
Let the diluted product circulate during 60 minutes at a temperature above 40 °C.
Rinse treated equipment/pipes/machinery with drinking water after application.
For professional use only. Do not mix with other chemicals.
4.2.2 Use-specific risk mitigation measures
During manual mixing and loading:
|
— |
Use of respiratory protective equipment (RPE) with APF 4 according to EN 405 or equivalent is mandatory. |
|
— |
Wear gloves according to EN374 or equivalent (glove material to be specified by the authorisation holder within the product information). |
|
— |
Wear chemical goggles according to EN166 or equivalent. |
|
— |
Wear a protective coverall (at least type 3 or 4, EN 14605 or equivalent ) which is impermeable for the biocidal product (coverall material to be specified by the authorisation holder within the product information). |
|
— |
Ventilation rate of at least 3ACH is needed. |
|
— |
Re-entry is only permitted once the air concentration for hydrogen peroxide has dropped below 0,9 ppm (1,25 mg/m3) or relevant lower national reference value or if the professional user wears the same appropriate RPE as during the mixing and loading task. |
During automated loading step:
|
— |
Wear gloves according to EN374 or equivalent (glove material to be specified by the authorisation holder within the product information). |
|
— |
Wear chemical goggles according to EN166 or equivalent. |
|
— |
Wear a protective coverall (at least type 3 or 4, EN 14605 or equivalent) which is impermeable for the biocidal product (coverall material to be specified by the authorisation holder within the product information). |
During maintenance and cleaning of dosing pumps:
-
Wear gloves according to EN374 or equivalent (glove material to be specified by the authorisation holder within the product information).
-
Wear chemical goggles according to EN166 or equivalent.
-
Wear a protective coverall (at least type 3 or 4, EN 14605 ) which is impermeable for the biocidal product (coverall material to be specified by the authorisation holder within the product information).
This is without prejudice to the application by employers of Council Directive 98/24/EC and other Union legislation in the area of health and safety at work. The full titles of the EN standards and reference to European law are available in Section 6
4.2.3 Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
IF INHALED: Move to fresh air and keep at rest in a position comfortable for breathing.
If symptoms: Call 112/ambulance for medical assistance.
If no symptoms: Call a POISON CENTRE or a doctor.
IF SWALLOWED: Immediately rinse mouth. Give something to drink, if exposed person is able to swallow. Do NOT induce vomiting. Call 112/ambulance for medical assistance.
IF ON SKIN: Immediately wash skin with plenty of water. Thereafter take off all contaminated clothing and wash it before reuse. Continue to wash the skin with water for 15 minutes. Call a POISON CENTRE or a doctor.
IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing for at least 15 minutes. Call 112/ambulance for medical assistance.
Information to Healthcare personnel/doctor:
The eyes should also be rinsed repeatedly on the way to the doctor if eye exposure to alkaline chemicals (pH > 11), amines and acids like acetic acid, formic acid or propionic acid.
4.2.4 Where specific to the use, the instructions for safe disposal of the product and its packaging
The packing and content must be eliminated as dangerous waste product under the whole responsibility of the possessor of this waste product. Do not throw wastes into sewers and watercourses. Dispose in a safe manner in accordance with local/national regulations.
4.2.5 Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
Keep only in the original container in a cool, well-ventilated place. Keep container closed when not in use.
Protect from frost. Store at temperatures not exceeding 40 °C. Protect from direct sunlight.
The shelf-life of the products is 3 years.
4.3 Use description
Use # 2.3 – PT4 – Concentrated drinking water system disinfectants based on Hydrogen peroxide with prior cleaning
|
Product type |
PT04: Food and feed area |
|
Where relevant, an exact description of the authorised use |
- |
|
Target organism(s) (including development stage) |
Common name: bacteria Common name: yeasts Common name: fungi |
|
Field(s) of use |
indoor use Disinfection of drinking water systems in food processing areas and food consumption areas (e.g. kitchens, canteens, restaurants), food production and processing industry areas. The systems are out of use during disinfection. |
|
Application method(s) |
Method: Injection in drinking water system and stand disinfection (The systems are out of use during disinfection.) Detailed description: |
|
Application rate(s) and frequency |
The product shall be diluted to 9 % product (v/v). Number and timing of application: 1 application per day if required Use at room temperature. |
|
Category(ies) of users |
professional |
|
Pack sizes and packaging material |
HDPE bottle: 1 L HDPE drum: 5 L, 10 L, 20 L, 25 L, 30 L, 60 L, 200 L HDPE container: 600 L, 1 000 L |
4.3.1 Use-specific instructions for use
First clean thoroughly and rinse the drinking water system.
The product shall be diluted to 9 % product (v/v).
Inject the diluted product in the drinking water system.
Make sure surfaces remain wet with the diluted product during 6 hours.
Rinse treated equipment/pipes/machinery with drinking water after application.
Check for the absence of H2O2 with a test strip at the last tap point before taking the drinking water system into use.
For professional use only. Do not mix with other chemicals.
4.3.2 Use-specific risk mitigation measures
During manual mixing and loading:
|
— |
Use of respiratory protective equipment (RPE) with APF 4 according to EN 405 or equivalent is mandatory. |
|
— |
Wear gloves according to EN374 or equivalent (glove material to be specified by the authorisation holder within the product information). |
|
— |
Wear chemical goggles according to EN166 or equivalent. |
|
— |
Wear a protective coverall (at least type 3 or 4, EN 14605 or equivalent) which is impermeable for the biocidal product (coverall material to be specified by the authorisation holder within the product information). |
|
— |
Ventilation rate of at least 3ACH is needed. |
|
— |
Re-entry is only permitted once the air concentration for hydrogen peroxide has dropped below 0,9 ppm (1,25 mg/m3) or relevant lower national reference value or if the professional user wears the same appropriate RPE as during the mixing and loading task. |
During automated loading step:
|
— |
Wear gloves according to EN374 or equivalent (glove material to be specified by the authorisation holder within the product information). |
|
— |
Wear chemical goggles according to EN166 or equivalent. |
|
— |
Wear a protective coverall (at least type 3 or 4, EN 14605 or equivalent) which is impermeable for the biocidal product (coverall material to be specified by the authorisation holder within the product information). |
During cleaning and maintenance of equipment:
-
Wear gloves according to EN374 or equivalent (glove material to be specified by the authorisation holder within the product information).
-
Wear chemical goggles according to EN166 or equivalent.
-
Wear a protective coverall (at least type 3 or 4, EN 14605 or equivalent) which is impermeable for the biocidal product (coverall material to be specified by the authorisation holder within the product information).
This is without prejudice to the application by employers of Council Directive 98/24/EC and other Union legislation in the area of health and safety at work. The full titles of the EN standards and reference to European law are available in Section 6
4.3.3 Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
IF INHALED: Move to fresh air and keep at rest in a position comfortable for breathing.
If symptoms: Call 112/ambulance for medical assistance.
If no symptoms: Call a POISON CENTRE or a doctor.
IF SWALLOWED: Immediately rinse mouth. Give something to drink, if exposed person is able to swallow. Do NOT induce vomiting. Call 112/ambulance for medical assistance.
IF ON SKIN: Immediately wash skin with plenty of water. Thereafter take off all contaminated clothing and wash it before reuse. Continue to wash the skin with water for 15 minutes. Call a POISON CENTRE or a doctor.
IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing for at least 15 minutes. Call 112/ambulance for medical assistance.
Information to Healthcare personnel/doctor:
The eyes should also be rinsed repeatedly on the way to the doctor if eye exposure to alkaline chemicals (pH > 11), amines and acids like acetic acid, formic acid or propionic acid.
4.3.4 Where specific to the use, the instructions for safe disposal of the product and its packaging
The packing and content must be eliminated as dangerous waste product under the whole responsibility of the possessor of this waste product. Do not throw wastes into sewers and watercourses. Dispose in a safe manner in accordance with local/national regulations.
4.3.5 Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
Keep only in the original container in a cool, well ventilated place. Keep container closed when not in use.
Protect from frost. Store at temperatures not exceeding 40 °C. Protect from direct sunlight.
The shelf-life of the products is 3 years.
4.4 Use description
Use # 2.5 – PT2 and PT4 – Concentrated surface disinfectant with prior cleaning, without post-rinsing based on Hydrogen Peroxide by fogging
|
Product type |
PT02: Disinfectants and algaecides not intended for direct application to humans or animals PT04: Food and feed area |
|
Where relevant, an exact description of the authorised use |
- |
|
Target organism(s) (including development stage) |
Common name: bacteria Common name: yeasts Common name: fungi |
|
Field(s) of use |
indoor use Room disinfection (non-porous surfaces) in food processing areas and food consumption areas (e.g. kitchens, canteens, restaurants), food production and processing industry areas, including food and feed silos, and industrial areas, commercial service and public areas. |
|
Application method(s) |
Method: by cold fogging equipment Detailed description: Particle size : 20 μm Concentration H2O2 : 14 % hydrogen peroxide (w/w) in water Room volume : >4 m3 Relative humidity : 50 %-75 % Temperature : room temperature |
|
Application rate(s) and frequency |
Application Rate: 40 mL/m3 14 % in-use concentration Hydrogen Peroxide (w/w) Number and timing of application: 1 application per day |
|
Category(ies) of users |
professional |
|
Pack sizes and packaging material |
HDPE bottle: 1 L HDPE drum: 5 L, 10 L, 20 L, 25 L, 30 L, 60 L, 200 L HDPE container: 600 L, 1 000 L |
4.4.1 Use-specific instructions for use
The product is applied by cold fogging equipment with specifications as mentioned in the above table. The product can only be applied by professionals.
Proceed as follows.
Preparation of the rooms to disinfect
The following operations must be performed prior to disinfection:
Clean the room
Remove excess water
Remove or protect sensitive electronic equipment and other objects that are sensitive to moisture
Open drawers and cupboard doors
Switch of ventilation and close windows and ventilation openings
Close toilet bowls (only for PT2 applications)
Professionals seal the enclosed space or room.
Wells and other wet areas must be disinfected separately with a suitable product
During disinfection, no people, animals or food can be present in the room.
The disinfection must be carried out in enclosed space
The applicator must placard or post all entrances to the treatment enclosure with signs bearing:
-
The signal word “DANGER” in red. “Area under treatment, “DO NOT ENTER/NO ENTRY.”
-
The statement “This sign may only be removed 1 hour after the treatment enclosure has been aerated to hydrogen peroxide levels less than or equal to 1,25 mg/m3”.
-
Identification of hydrogen peroxide as a hazard associated with the treatment process.
-
Contact information for the applicator.
Disinfection procedure
After preparation of the rooms to disinfect and placing of the cold fogging equipment, the disinfection can start. The fogging unit must be orientated to discharge at the opposite of the exit that the professional will use to leave the treatment area.
The product should be diluted to 14 % hydrogen peroxide (w/w).
Start the disinfection procedure at a relative humidity between 50 % and 75 % and at room temperature.
To avoid under- or overdosing, the volume of the room should be calculated before the disinfection. The following formula should be taken into account: length x width x height (in meters with an accuracy of one decimal).
The fogging device should be set for a dosage of 40 ml diluted product/m3.
The contact time of 3 hours starts after diffusion time and after reaching the application rate of 40 ml/m3. Start the ventilation at the end of the minimum required contact time so that the concentration of hydrogen peroxide decreases to an acceptable safety level.
No need to rinse after disinfection.
Multiple fog devices can be used in larger rooms.
Validation and re-entry instructions
Biological and chemical validation shall be performed for each room to be disinfected (or in a suitable “standard” room in a facility, if applicable) with the devices to be used after which a protocol for disinfection of these rooms can be made and used thereafter.
Re-entry: see use-specific risk mitigation measures.
4.4.2 Use-specific risk mitigation measures
During manual mixing and loading:
|
— |
Use of respiratory protective equipment (RPE) with APF 4 according to EN 405 or equivalent is mandatory. |
|
— |
Wear gloves according to EN374 or equivalent (glove material to be specified by the authorisation holder within the product information). |
|
— |
Wear chemical goggles according to EN166 or equivalent. |
|
— |
Wear a protective coverall (at least type 3 or 4, EN 14605 or equivalent) which is impermeable for the biocidal product (coverall material to be specified by the authorisation holder within the product information). |
|
— |
Ventilation rate of at least 3ACH is needed. |
|
— |
Other professionals are allowed in the room where mixing and loading is taking place when the air concentration for hydrogen peroxide has dropped below 0,9 ppm (1,25 mg/m3) or relevant lower national reference value or if the professional user wears the same RPE as during the mixing and loading task. |
During automated loading step:
|
— |
Wear gloves according to EN374 or equivalent (glove material to be specified by the authorisation holder within the product information). |
|
— |
Wear chemical goggles according to EN166 or equivalent. |
|
— |
Wear a protective coverall (at least type 3 or 4, EN 14605 or equivalent) which is impermeable for the biocidal product (coverall material to be specified by the authorisation holder within the product information). |
When placing the disinfecting device:
-
The fogging unit must be orientated to discharge at the opposite of the exit that the professional will use to leave the treatment area.
Re-entry
During disinfection:
The professional user may only enter the room in emergency situations or to reactivate the ventilation when the hydrogen peroxide level has dropped below 36 ppm (50 mg/ m3), considering RPE with APF 40 against vapour (Type of RPE to be specified by the authorisation holder within the product information).
After disinfection:
Re-entry without RPE is only permitted once the air concentration for hydrogen peroxide has dropped below 0,9 ppm (1,25 mg/m3) or relevant lower national reference value.
The following RPE have to be respected after efficacy time is fulfilled and before entry in treated premises, or in case of emergency re-entry.
Following RPE should be used based on the measured H2O2 concentrations:
|
RPE APF 4: |
If the H2O2 concentration is between 5 mg/m3 and 1,25 mg/m3 |
|
RPE APF 10: |
If the H2O2 concentration is between 12,5 mg/m3 and 5 mg/m3 |
|
RPE APF 20: |
If the H2O2 concentration is between 25 mg/m3 and 12,5 mg/m3 |
|
RPE APF 40: |
If the H2O2 concentration is between 50 mg/m3 and 25 mg/m3 |
Contact your supplier if you need more details on which RPE is needed depending on the room's specifications.
During cleaning and maintenance of fogging equipment:
-
Wear chemical goggles according to EN166 or equivalent.
This is without prejudice to the application by employers of Council Directive 98/24/EC and other Union legislation in the area of health and safety at work. The full titles of the EN standards and reference to European law are available in Section 6
Do not allow to touch the surface until it is dried.
4.4.3 Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
IF INHALED: Move to fresh air and keep at rest in a position comfortable for breathing.
If symptoms: Call 112/ambulance for medical assistance.
If no symptoms: Call a POISON CENTRE or a doctor.
IF SWALLOWED: Immediately rinse mouth. Give something to drink, if exposed person is able to swallow. Do NOT induce vomiting. Call 112/ambulance for medical assistance.
IF ON SKIN: Immediately wash skin with plenty of water. Thereafter take off all contaminated clothing and wash it before reuse. Continue to wash the skin with water for 15 minutes. Call a POISON CENTRE or a doctor.
IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing for at least 15 minutes. Call 112/ambulance for medical assistance.
Information to Healthcare personnel/doctor:
The eyes should also be rinsed repeatedly on the way to the doctor if eye exposure to alkaline chemicals (pH > 11), amines and acids like acetic acid, formic acid or propionic acid.
4.4.4 Where specific to the use, the instructions for safe disposal of the product and its packaging
The packing and content must be eliminated as dangerous waste product under the whole responsibility of the possessor of this waste product. Do not throw wastes into sewers and watercourses. Dispose in a safe manner in accordance with local/national regulations.
4.4.5 Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
Keep only in the original container in a cool, well ventilated place. Keep container closed when not in use.
Protect from frost. Store at temperatures not exceeding 40 °C. Protect from direct sunlight.
The shelf-life of the products is 3 years.
5 GENERAL DIRECTIONS FOR USE OF THE META SPC 1
5.1 Instructions for use
See use-specific instructions for use.
Apply only on non-porous surfaces.
Inform the authorisation holder if the treatment is ineffective.
5.2 Risk mitigation measures
See use-specific directions for use.
5.3 Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
IF INHALED: Move to fresh air and keep at rest in a position comfortable for breathing.
If symptoms: Call 112/ambulance for medical assistance.
If no symptoms: Call a POISON CENTRE or a doctor.
IF SWALLOWED: Immediately rinse mouth. Give something to drink, if exposed person is able to swallow. Do NOT induce vomiting. Call 112/ambulance for medical assistance.
IF ON SKIN: Immediately wash skin with plenty of water. Thereafter take off all contaminated clothing and wash it before reuse. Continue to wash the skin with water for 15 minutes. Call a POISON CENTRE or a doctor.
IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing for at least 15 minutes. Call 112/ambulance for medical assistance.
Information to Healthcare personnel/doctor:
The eyes should also be rinsed repeatedly on the way to the doctor if eye exposure to alkaline chemicals (pH > 11), amines and acids like acetic acid, formic acid or propionic acid.
5.4 Instructions for safe disposal of the product and its packaging
The packing and content must be eliminated as dangerous waste product under the whole responsibility of the possessor of this waste product. Do not throw wastes into sewers and watercourses. Dispose in a safe manner in accordance with local/national regulations.
5.5 Conditions of storage and shelf-life of the product under normal conditions of storage
Keep only in the original container in a cool, well ventilated place. Keep container closed when not in use.
Protect from frost. Store at temperatures not exceeding 40 °C. Protect from direct sunlight.
The shelf-life of the products is 3 years.
6 OTHER INFORMATION
Please be aware of the European reference value of 1.25 mg/m3 for the active substance hydrogen peroxide (CAS No.: 7722-84-1) which was used for the risk assessment for the biocidal product (please be aware that relevant lower national limit values may apply).
The full titles of the European Standards mentioned in the sections 'Use-specific risk mitigation measures' are listed below
EN 374 – Protective gloves against dangerous chemicals and micro-organisms
EN 166 – Eye protection against chemicals
EN 405 - Respiratory protective devices - Valved filtering half masks to protect against gases or gases and particles
EN 14605 - Protective clothing against liquid chemicals - Performance requirements for clothing with liquid-tight (Type 3) or spray-tight (Type 4) connections, including items providing protection to parts of the body only (Types PB [3] and PB [4])
With respect to the "Category(ies) of user(s)" note: “Professionals (including industrial users) means trained professionals if this is required by national legislation.
7 THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 1
7.1 Trade name(s), authorisation number and specific composition of each individual product
|
Trade name(s) |
Cid Clean |
|
|||||
|
Al Ox |
|
||||||
|
SynQ Red Des Oxi |
|
||||||
|
Hydro Pur |
|
||||||
|
Keno Des 50 |
|
||||||
|
Peroxoclean |
|
||||||
|
Peroxi Des |
|
||||||
|
Properox |
|
||||||
|
Pro Pur |
|
||||||
|
Dufa Aqua |
|
||||||
|
Kenolux L300 |
|
||||||
|
Hi-Aquanet |
|
||||||
|
Authorisation number |
EU-0036243-0001 1-1 |
|
|||||
|
Common name |
IUPAC name |
Function |
CAS number |
EC number |
Content (%) |
||
|
Hydrogen peroxide |
|
Active substance |
7722-84-1 |
231-765-0 |
50,15 % (w/w) |
||
1 META SPC 2 ADMINISTRATIVE INFORMATION
1.1 Meta SPC 2 identifier
|
Identifier |
Meta SPC: meta SPC 4 |
1.2 Suffix to the authorisation number
|
Number |
1-2 |
1.3 Product type(s)
|
Product type(s) |
PT04: Food and feed area PT02: Disinfectants and algaecides not intended for direct application to humans or animals |
2 META SPC 2 COMPOSITION
2.1 Qualitative and quantitative information on the composition of the meta SPC 2
|
Common name |
IUPAC name |
Function |
CAS number |
EC number |
Content (%) |
|
Hydrogen peroxide |
|
Active substance |
7722-84-1 |
231-765-0 |
36,68 - 36,68 % (w/w) |
2.2 Type(s) of formulation of the meta SPC 2
|
Formulation type(s) |
SL Soluble concentrate |
3 HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 2
|
Hazard statements |
H272: May intensify fire; oxidiser. H318: Causes serious eye damage. H302: Harmful if swallowed. H315: Causes skin irritation. H335: May cause respiratory irritation. H412: Harmful to aquatic life with long lasting effects. |
|
Precautionary statements |
P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P220: Keep away from clothing or other combustible materials. P261: Avoid breathing vapours. P264: Wash hands thoroughly after handling. P270: Do not eat, drink or smoke when using this product. P273: Avoid release to the environment. P280: Wear protective gloves, eye protection, face protection. P301+P312: IF SWALLOWED: Call a POISON CENTER or doctor if you feel unwell. P330: Rinse mouth. P302+P352: IF ON SKIN: Wash with plenty of water. P332+P313: If skin irritation occurs: Get medical advice. P332+P313: If skin irritation occurs: Get medical attention. P304+P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing. P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P310: Immediately call a POISON CENTER or doctor. P321: Specific treatment (see... on this label). P370+P378: In case of fire: Use water to extinguish. P362+P364: Take off contaminated clothing and wash it before reuse. P403+P233: Store in a well-ventilated place. Keep container tightly closed. P405: Store locked up. P501: Dispose of container hazardous or special waste collection point, in accordance with local, regional, national and/or international regulation. |
4 AUTHORISED USE(S) OF THE META SPC
4.1 Use description
Use # 4.1 – PT4 – Concentrated CIP disinfectants with circulation based on Hydrogen peroxide with post-rinsing
|
Product type |
PT04: Food and feed area |
|
Target organism(s) (including development stage) |
Common name: bacteria Common name: yeasts |
|
Field(s) of use |
indoor use Disinfection of inner surface in food processing areas and food consumption areas (e.g. kitchens, canteens, restaurants), food production and processing industry areas, including food and feed silos. |
|
Application method(s) |
Method: By CIP Detailed description: / |
|
Application rate(s) and frequency |
The product shall be diluted to 5 % product (v/v). Number and timing of application: 1 to 2 applications per day |
|
Category(ies) of users |
professional |
|
Pack sizes and packaging material |
HDPE bottle: 1 L HDPE drum: 5 L, 10 L, 20 L, 25 L, 30 L, 60 L, 200 L HDPE container: 600 L, 1 000 L |
4.1.1 Use-specific instructions for use
The automated M&L has to be done with a connecting line, ensuring the packaging is either unopened or only briefly opened to do the connection and disconnection.
First clean thoroughly the inner surfaces of the food and feed area.
The product shall be diluted to 5 % product (v/v).
Let the diluted product circulate during 60 minutes at a temperature above 40 °C. Rinse treated equipment/pipes/machinery with drinking water after application.
For professional use only. Do not mix with other chemicals.
4.1.2 Use-specific risk mitigation measures
During manual mixing and loading:
|
— |
Use of respiratory protective equipment (RPE) with APF 4 according to EN 405 or equivalent is mandatory. |
|
— |
Wear gloves according to EN374 equivalent (glove material to be specified by the authorisation holder within the product information). |
|
— |
Wear chemical goggles according to EN166 equivalent. |
|
— |
Wear a protective coverall (at least type 3 or 4, EN 14605 equivalent) which is impermeable for the biocidal product (coverall material to be specified by the authorisation holder within the product information). |
|
— |
Ventilation rate of at least 3ACH is needed. |
|
— |
Re-entry is only permitted once the air concentration for hydrogen peroxide has dropped below 0,9 ppm (1,25 mg/m3) or relevant lower national reference value, or if the professional user wears the same appropriate PPE as during the mixing and loading task. |
During automated loading step:
|
— |
Wear gloves according to EN374 equivalent (glove material to be specified by the authorisation holder within the product information). |
|
— |
Wear chemical goggles according to EN166 equivalent. |
|
— |
Wear a protective coverall (at least type 3 or 4, EN 14605 equivalent) which is impermeable for the biocidal product (coverall material to be specified by the authorisation holder within the product information). |
During cleaning and maintenance of equipment:
-
Wear gloves according to EN374 or equivalent (glove material to be specified by the authorisation holder within the product information).
-
Wear chemical goggles according to EN166 or equivalent.
-
Wear a protective coverall (at least type 3 or 4, EN 14605 or equivalent) which is impermeable for the biocidal product (coverall material to be specified by the authorisation holder within the product information).
This is without prejudice to the application by employers of Council Directive 98/24/EC and other Union legislation in the area of health and safety at work.
4.1.3 Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
IF INHALED: Move to fresh air and keep at rest in a position comfortable for breathing.
If symptoms: Call 112/ambulance for medical assistance.
If no symptoms: Call a POISON CENTRE or a doctor.
IF SWALLOWED: Immediately rinse mouth. Give something to drink, if exposed person is able to swallow. Do NOT induce vomiting. Call 112/ambulance for medical assistance.
IF ON SKIN: Immediately wash skin with plenty of water. Thereafter take off all contaminated clothing and wash it before reuse. Continue to wash the skin with water for 15 minutes. Call a POISON CENTRE or a doctor.
IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing for at least 15 minutes. Call 112/ambulance for medical assistance.
Information to Healthcare personnel/doctor:
The eyes should also be rinsed repeatedly on the way to the doctor if eye exposure to alkaline chemicals (pH > 11), amines and acids like acetic acid, formic acid or propionic acid.
4.1.4 Where specific to the use, the instructions for safe disposal of the product and its packaging
The packing and content must be eliminated as dangerous waste product under the whole responsibility of the possessor of this waste product. Do not throw wastes into sewers and watercourses. Dispose in a safe manner in accordance with local/national regulations.
4.1.5 Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
Keep only in the original container in a cool, well ventilated place. Keep container closed when not in use.
Protect from frost. Store at temperatures not exceeding 40 °C. Protect from direct sunlight.
The shelf-life of the products is 3 years.
4.2 Use description
Use # 4.2 – PT4 – Concentrated CIP disinfectants with circulation based on Hydrogen peroxide with prior cleaning
|
Product type |
PT04: Food and feed area |
|
Where relevant, an exact description of the authorised use |
- |
|
Target organism(s) (including development stage) |
Common name: bacteria Common name: yeasts |
|
Field(s) of use |
indoor use Disinfection of inner surfaces in food processing areas and food consumption areas (e.g. kitchens, canteens, restaurants), food production and processing industry areas, including food and feed silos. |
|
Application method(s) |
Method: By CIP Detailed description: / |
|
Application rate(s) and frequency |
The product shall be diluted to 5 % product (v/v). Number and timing of application: 1 to 2 applications per day |
|
Category(ies) of users |
professional |
|
Pack sizes and packaging material |
HDPE bottle: 1 L HDPE drum: 5 L, 10 L, 20 L, 25 L, 30 L, 60 L, 200 L HDPE container: 600 L, 1 000 L |
4.2.1 Use-specific instructions for use
The automated M&L has to be done with a connecting line, ensuring the packaging is either unopened or only briefly opened to do the connection and disconnection
.
First clean thoroughly the inner surfaces of the food and feed area .
The product shall be diluted to 5 % product (v/v).
Let the diluted product circulate during minimum 60 minutes at a temperature above 40 °C. Rinse treated equipment/pipes/machinery with drinking water after application.
For professional use only. Do not mix with other chemicals.
4.2.2 Use-specific risk mitigation measures
During manual mixing and loading:
|
— |
Use of respiratory protective equipment (RPE) with APF 4 according to EN 405 or equivalent is mandatory. |
|
— |
Wear gloves according to EN374 or equivalent (glove material to be specified by the authorisation holder within the product information). |
|
— |
Wear chemical goggles according to EN166 or equivalent. |
|
— |
Wear a protective coverall (at least type 3 or 4, EN 14605 or equivalent) which is impermeable for the biocidal product (coverall material to be specified by the authorisation holder within the product information). |
|
— |
Ventilation rate of at least 3ACH is needed. |
|
— |
Re-entry is only permitted once the air concentration for hydrogen peroxide has dropped below 0,9 ppm (1,25 mg/m3) or relevant lower national reference value, or if the professional user wears the same appropriate PPE as during the mixing and loading task. |
During automated loading step:
|
— |
Wear gloves according to EN374 or equivalent (glove material to be specified by the authorisation holder within the product information). |
|
— |
Wear chemical goggles according to EN166 or equivalent. |
|
— |
Wear a protective coverall (at least type 3 or 4, EN 14605 or equivalent) which is impermeable for the biocidal product (coverall material to be specified by the authorisation holder within the product information). |
During cleaning and maintenance of equipment:
-
Wear gloves according to EN374 or equivalent (glove material to be specified by the authorisation holder within the product information).
-
Wear chemical goggles according to EN166 or equivalent.
-
Wear a protective coverall (at least type 3 or 4, EN 14605 or equivalent) which is impermeable for the biocidal product (coverall material to be specified by the authorisation holder within the product information).
This is without prejudice to the application by employers of Council Directive 98/24/EC and other Union legislation in the area of health and safety at work.
4.2.3 Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
IF INHALED: Move to fresh air and keep at rest in a position comfortable for breathing.
If symptoms: Call 112/ambulance for medical assistance.
If no symptoms: Call a POISON CENTRE or a doctor.
IF SWALLOWED: Immediately rinse mouth. Give something to drink, if exposed person is able to swallow. Do NOT induce vomiting. Call 112/ambulance for medical assistance.
IF ON SKIN: Immediately wash skin with plenty of water. Thereafter take off all contaminated clothing and wash it before reuse. Continue to wash the skin with water for 15 minutes. Call a POISON CENTRE or a doctor.
IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing for at least 15 minutes. Call 112/ambulance for medical assistance.
Information to Healthcare personnel/doctor:
The eyes should also be rinsed repeatedly on the way to the doctor if eye exposure to alkaline chemicals (pH > 11), amines and acids like acetic acid, formic acid or propionic acid.
4.2.4 Where specific to the use, the instructions for safe disposal of the product and its packaging
The packing and content must be eliminated as dangerous waste product under the whole responsibility of the possessor of this waste product. Do not throw wastes into sewers and watercourses. Dispose in a safe manner in accordance with local/national regulations.
4.2.5 Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
Keep only in the original container in a cool, well ventilated place. Keep container closed when not in use.
Protect from frost. Store at temperatures not exceeding 40 °C. Protect from direct sunlight.
The shelf-life of the products is 3 years.
4.3 Use description
Use # 4.3 – PT4 – Concentrated drinking water system disinfectants based on Hydrogen peroxide with prior cleaning
|
Product type |
PT04: Food and feed area |
|
Where relevant, an exact description of the authorised use |
- |
|
Target organism(s) (including development stage) |
Common name: bacteria Common name: yeasts Common name: fungi |
|
Field(s) of use |
indoor use Disinfection of drinking water systems food processing areas and food consumption areas (e.g. kitchens, canteens, restaurants), food production and processing industry areas. The systems are out of use during disinfection. |
|
Application method(s) |
Method: Injection in drinking water system and stand disinfection Detailed description: The systems are out of use during disinfection. |
|
Application rate(s) and frequency |
The product shall be diluted to 9 % product (v/v). Number and timing of application: 1 application per day if required Use at room temperature. |
|
Category(ies) of users |
professional |
|
Pack sizes and packaging material |
HDPE bottle: 1 L HDPE drum: 5 L, 10 L, 20 L, 25 L, 30 L, 60 L, 200 L HDPE container: 600 L, 1 000 L |
4.3.1 Use-specific instructions for use
First clean thoroughly and rinse the drinking water system.
The product shall be diluted to 9 % product (v/v).
Inject the diluted product in the drinking water system.
Make sure surfaces remain wet with the diluted product during minimum 6 hours.
Rinse treated equipment/pipes/machinery with drinking water after application.
Check for the absence of H2O2 with a test strip at the last tap point before taking the drinking water system into use.
For professional use only. Do not mix with other chemicals.
4.3.2 Use-specific risk mitigation measures
During manual mixing and loading:
|
— |
Use of respiratory protective equipment (RPE) with APF 4 according to EN 405 or equivalent is mandatory. |
|
— |
Wear gloves according to EN374 or equivalent (glove material to be specified by the authorisation holder within the product information). |
|
— |
Wear chemical goggles according to EN166 or equivalent. |
|
— |
Wear a protective coverall (at least type 3 or 4, EN 14605 or equivalent) which is impermeable for the biocidal product (coverall material to be specified by the authorisation holder within the product information). |
|
— |
Ventilation rate of at least 3ACH is needed. |
|
— |
Re-entry is only permitted once the air concentration for hydrogen peroxide has dropped below 0,9 ppm (1,25 mg/m3) or relevant lower national reference value, or if the professional user wears the same appropriate PPE as during the mixing and loading task. |
During automated loading step:
|
— |
Wear gloves according to EN374 or equivalent (glove material to be specified by the authorisation holder within the product information). |
|
— |
Wear chemical goggles according to EN166 or equivalent. |
|
— |
Wear a protective coverall (at least type 3 or 4, EN 14605 or equivalent) which is impermeable for the biocidal product (coverall material to be specified by the authorisation holder within the product information). |
During cleaning and maintenance of equipment:
-
Wear gloves according to EN374 or equivalent (glove material to be specified by the authorisation holder within the product information).
-
Wear chemical goggles according to EN166 or equivalent.
-
Wear a protective coverall (at least type 3 or 4, EN 14605 or equivalent) which is impermeable for the biocidal product (coverall material to be specified by the authorisation holder within the product information).
This is without prejudice to the application by employers of Council Directive 98/24/EC and other Union legislation in the area of health and safety at work.
4.3.3 Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
IF INHALED: Move to fresh air and keep at rest in a position comfortable for breathing.
If symptoms: Call 112/ambulance for medical assistance.
If no symptoms: Call a POISON CENTRE or a doctor.
IF SWALLOWED: Immediately rinse mouth. Give something to drink, if exposed person is able to swallow. Do NOT induce vomiting. Call 112/ambulance for medical assistance.
IF ON SKIN: Immediately wash skin with plenty of water. Thereafter take off all contaminated clothing and wash it before reuse. Continue to wash the skin with water for 15 minutes. Call a POISON CENTRE or a doctor.
IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing for at least 15 minutes. Call 112/ambulance for medical assistance.
Information to Healthcare personnel/doctor:
The eyes should also be rinsed repeatedly on the way to the doctor if eye exposure to alkaline chemicals (pH > 11), amines and acids like acetic acid, formic acid or propionic acid.
4.3.4 Where specific to the use, the instructions for safe disposal of the product and its packaging
The packing and content must be eliminated as dangerous waste product under the whole responsibility of the possessor of this waste product. Do not throw wastes into sewers and watercourses. Dispose in a safe manner in accordance with local/national regulations.
4.3.5 Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
Keep only in the original container in a cool, well ventilated place. Keep container closed when not in use.
Protect from frost. Store at temperatures not exceeding 40 °C. Protect from direct sunlight.
The shelf-life of the products is 3 years.
4.4 Use description
Use # 4.5 – PT2 and PT4 – Concentrated surface disinfectant with prior cleaning, without post-rinsing based on Hydrogen Peroxide by fogging
|
Product type |
PT02: Disinfectants and algaecides not intended for direct application to humans or animals PT04: Food and feed area |
|
Where relevant, an exact description of the authorised use |
- |
|
Target organism(s) (including development stage) |
Common name: bacteria Common name: yeasts Common name: fungi |
|
Field(s) of use |
indoor use Room disinfection (non-porous surfaces) in food processing areas and food consumption areas (e.g. kitchens, canteens, restaurants), food production and processing industry areas, including food and feed silos, and industrial areas, commercial service and public areas. |
|
Application method(s) |
Method: By cold fogging equipment Detailed description: Particle size : 20 μm Concentration H2O2 : 14 % hydrogen peroxide (w/w) in water Room volume : >4 m3 Relative humidity : 50 %-75 % Temperature : room temperature |
|
Application rate(s) and frequency |
Application Rate: 40 mL/m3 14 % in-use concentration Hydrogen Peroxide (w/w) Number and timing of application: 1 application per day |
|
Category(ies) of users |
professional |
|
Pack sizes and packaging material |
HDPE bottle: 1 L HDPE drum: 5 L, 10 L, 20 L, 25 L, 30 L, 60 L, 200 L HDPE container: 600 L, 1 000 L |
4.4.1 Use-specific instructions for use
The product is applied by cold fogging equipment with specifications as mentioned in the above table. The product can only be applied by professionals.
Proceed as follows.
Preparation of the rooms to disinfect
The following operations must be performed prior to disinfection:
Clean the room
Remove excess water
Remove or protect sensitive electronic equipment and other objects that are sensitive to moisture
Open drawers and cupboard doors
Switch of ventilation and close windows and ventilation openings
Close toilet bowls (only for PT2 applications)
Professionals seal the enclosed space or room.
Wells and other wet areas must be disinfected separately with a suitable product
During disinfection, no people, animals or food can be present in the room.
The disinfection must be carried out in enclosed space
The applicator must placard or post all entrances to the treatment enclosure with signs bearing:
-
The signal word “DANGER” in red. “Area under treatment, “DO NOT ENTER/NO ENTRY.”
-
The statement “This sign may only be removed 1 hour after the treatment enclosure has been aerated to hydrogen peroxide levels less than or equal to 1,25 mg/m3”.
-
Identification of hydrogen peroxide as a hazard associated with the treatment process.
-
Contact information for the applicator.
Disinfection procedure
After preparation of the rooms to disinfect and placing of the cold fogging equipment, the disinfection can start. The fogging unit must be orientated to discharge at the opposite of the exit that the professional will use to leave the treatment area.
The product should be diluted to 14 % hydrogen peroxide (w/w).
Start the disinfection procedure at a relative humidity between 50 % and 75 % and at room temperature.
To avoid under- or overdosing, the volume of the room should be calculated before the disinfection. The following formula should be taken into account: length x width x height (in meters with an accuracy of one decimal).
The fogging device should be set for a dosage of 40 ml diluted product/m3.
The contact time of 3 hours starts after diffusion time and after reaching the application rate of 40 ml/m3. Start the ventilation at the end of the minimum required contact time so that the concentration of hydrogen peroxide decreases to an acceptable safety level.
No need to rinse after disinfection.
Multiple fog devices can be used in larger rooms.
Validation and re-entry instructions
Biological and chemical validation shall be performed for each room to be disinfected (or in a suitable “standard” room in a facility, if applicable) with the devices to be used after which a protocol for disinfection of these rooms can be made and used thereafter.
Re-entry: see use-specific risk mitigation measures
4.4.2 Use-specific risk mitigation measures
During manual mixing and loading:
|
— |
Use of respiratory protective equipment (RPE) with APF 4 according to EN 405 or equivalent is mandatory. |
|
— |
Wear gloves according to EN374 or equivalent (glove material to be specified by the authorisation holder within the product information). |
|
— |
Wear chemical goggles according to EN166 or equivalent. |
|
— |
Wear a protective coverall (at least type 3 or 4, EN 14605 or equivalent) which is impermeable for the biocidal product (coverall material to be specified by the authorisation holder within the product information). |
|
— |
Ventilation rate of at least 3ACH is needed. |
|
— |
Other professionals are allowed in the room where mixing and loading is taking place when the air concentration for hydrogen peroxide has dropped below 0,9 ppm (1,25 mg/m3) or relevant lower national reference value, or if the professional user wears the same PPE as during the mixing and loading task. |
During automated loading step:
|
— |
Wear gloves according to EN374 or equivalent (glove material to be specified by the authorisation holder within the product information). |
|
— |
Wear chemical goggles according to EN166 or equivalent. |
|
— |
Wear a protective coverall (at least type 3 or 4, EN 14605 or equivalent) which is impermeable for the biocidal product (coverall material to be specified by the authorisation holder within the product information). |
When placing the disinfecting device:
-
The fogging unit must be orientated to discharge at the opposite of the exit that the professional will use to leave the treatment area.
Re-entry
During disinfection:
The professional user may only enter the room in emergency situations or to reactivate the ventilation when the hydrogen peroxide level has dropped below 36 ppm (50 mg/ m3), considering RPE with APF 40 against vapour (Type of RPE to be specified by the authorisation holder within the product information).
After disinfection:
Re-entry without the use of RPE is only permitted once the air concentration for hydrogen peroxide has dropped below 0,
9 ppm (1,25 mg/m3) or relevant lower national reference value.
The following RPE have to be respected after efficacy time is fulfilled and before entry in treated premises, or in case of emergency re-entry.
Following RPE should be used based on the measured H2O2 concentrations:
|
RPE APF 4: |
If the H2O2 concentration is between 5 mg/m3 and 1,25 mg/m3 |
|
RPE APF 10: |
If the H2O2 concentration is between 12,5 mg/m3 and 5 mg/m3 |
|
RPE APF 20: |
If the H2O2 concentration is between 25 mg/m3 and 12,5 mg/m3 |
|
RPE APF 40: |
If the H2O2 concentration is between 50 mg/m3 and 25 mg/m3 |
Contact your supplier if you need more details on which RPE is needed depending on the room's specifications.
During cleaning and maintenance of fogging equipment:
-
Wear chemical goggles according to EN166 or equivalent.
This is without prejudice to the application by employers of Council Directive 98/24/EC and other Union legislation in the area of health and safety at work.
Do not allow to touch the surface until it is dried.
4.4.3 Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
IF INHALED: Move to fresh air and keep at rest in a position comfortable for breathing.
If symptoms: Call 112/ambulance for medical assistance.
If no symptoms: Call a POISON CENTRE or a doctor.
IF SWALLOWED: Immediately rinse mouth. Give something to drink, if exposed person is able to swallow. Do NOT induce vomiting. Call 112/ambulance for medical assistance.
IF ON SKIN: Immediately wash skin with plenty of water. Thereafter take off all contaminated clothing and wash it before reuse. Continue to wash the skin with water for 15 minutes. Call a POISON CENTRE or a doctor.
IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing for at least 15 minutes. Call 112/ambulance for medical assistance.
Information to Healthcare personnel/doctor:
The eyes should also be rinsed repeatedly on the way to the doctor if eye exposure to alkaline chemicals (pH > 11), amines and acids like acetic acid, formic acid or propionic acid.
4.4.4 Where specific to the use, the instructions for safe disposal of the product and its packaging
The packing and content must be eliminated as dangerous waste product under the whole responsibility of the possessor of this waste product. Do not throw wastes into sewers and watercourses. Dispose in a safe manner in accordance with local/national regulations.
4.4.5 Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
Keep only in the original container in a cool, well ventilated place. Keep container closed when not in use.
Protect from frost. Store at temperatures not exceeding 40 °C. Protect from direct sunlight.
The shelf-life of the products is 3 years.
5 GENERAL DIRECTIONS FOR USE OF THE META SPC 2
5.1 Instructions for use
See use-specific instructions for use.
Apply only on non-porous surfaces.
Inform the authorisation holder if the treatment is ineffective.
5.2 Risk mitigation measures
See use-specific risk mitigation measures
5.3 Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
IF INHALED: Move to fresh air and keep at rest in a position comfortable for breathing.
If symptoms: Call 112/ambulance for medical assistance.
If no symptoms: Call a POISON CENTRE or a doctor.
IF SWALLOWED: Immediately rinse mouth. Give something to drink, if exposed person is able to swallow. Do NOT induce vomiting. Call 112/ambulance for medical assistance.
IF ON SKIN: Immediately wash skin with plenty of water. Thereafter take off all contaminated clothing and wash it before reuse. Continue to wash the skin with water for 15 minutes. Call a POISON CENTRE or a doctor.
IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing for at least 15 minutes. Call 112/ambulance for medical assistance.
Information to Healthcare personnel/doctor:
The eyes should also be rinsed repeatedly on the way to the doctor if eye exposure to alkaline chemicals (pH > 11), amines and acids like acetic acid, formic acid or propionic acid.
5.4 Instructions for safe disposal of the product and its packaging
The packing and content must be eliminated as dangerous waste product under the whole responsibility of the possessor of this waste product. Do not throw wastes into sewers and watercourses. Dispose in a safe manner in accordance with local/national regulations.
5.5 Conditions of storage and shelf-life of the product under normal conditions of storage
Keep only in the original container in a cool, well ventilated place. Keep container closed when not in use.
Protect from frost. Store at temperatures not exceeding 40 °C. Protect from direct sunlight.
The shelf-life of the products is 3 years.
6 OTHER INFORMATION
Please be aware of the European reference value of 1.25 mg/m3 for the active substance hydrogen peroxide (CAS No.: 7722-84-1) which was used for the risk assessment for the biocidal product (please be aware that relevant lower national limit values may apply).
The full titles of the European Standards mentioned in the sections 'Use-specific risk mitigation measures' are listed below
EN 374 – Protective gloves against dangerous chemicals and micro-organisms
EN 166 – Eye protection against chemicals
EN 405 - Respiratory protective devices - Valved filtering half masks to protect against gases or gases and particles
EN 14605 - Protective clothing against liquid chemicals - Performance requirements for clothing with liquid-tight (Type 3) or spray-tight (Type 4) connections, including items providing protection to parts of the body only (Types PB [3] and PB [4])
With respect to the "Category(ies) of user(s)" note: “Professionals (including industrial users) means trained professionals if this is required by national legislation.
7 THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 2
7.1 Trade name(s), authorisation number and specific composition of each individual product
|
Trade name(s) |
Peroxides 35 |
|
|||||
|
Agri Peroxi |
|
||||||
|
Kenodes 35 |
|
||||||
|
Clean Touch Disinfectant Concentrated |
|
||||||
|
Air Des 100 |
|
||||||
|
Authorisation number |
EU-0036243-0002 1-2 |
|
|||||
|
Common name |
IUPAC name |
Function |
CAS number |
EC number |
Content (%) |
||
|
Hydrogen peroxide |
|
Active substance |
7722-84-1 |
231-765-0 |
36,68 % (w/w) |
||
ELI: http://data.europa.eu/eli/reg_impl/2026/2511/oj
ISSN 1977-0677 (electronic edition)