EUR-Lex Access to European Union law
This document is an excerpt from the EUR-Lex website
Document 52014PC0647
Proposal for a COUNCIL DECISION establishing the position to be adopted on the Union's behalf in the relevant Committees of the United Nations Economic Commission for Europe as regards the proposals for amendments to UN Regulations Nos. 4, 6, 11, 13, 13H, 19, 25, 34, 37, 43, 44, 48, 53, 70, 96, 98, 104, 105, 106, 107, 112, 113, 121, 128, on the new UN Global Technical Regulation on tyres, on Amendment 3 to UN GTR No. 4 with regard to the Worldwide Heavy-Duty Certification Procedure and on an amendment to Mutual Resolution No. 1
Proposal for a COUNCIL DECISION establishing the position to be adopted on the Union's behalf in the relevant Committees of the United Nations Economic Commission for Europe as regards the proposals for amendments to UN Regulations Nos. 4, 6, 11, 13, 13H, 19, 25, 34, 37, 43, 44, 48, 53, 70, 96, 98, 104, 105, 106, 107, 112, 113, 121, 128, on the new UN Global Technical Regulation on tyres, on Amendment 3 to UN GTR No. 4 with regard to the Worldwide Heavy-Duty Certification Procedure and on an amendment to Mutual Resolution No. 1
Proposal for a COUNCIL DECISION establishing the position to be adopted on the Union's behalf in the relevant Committees of the United Nations Economic Commission for Europe as regards the proposals for amendments to UN Regulations Nos. 4, 6, 11, 13, 13H, 19, 25, 34, 37, 43, 44, 48, 53, 70, 96, 98, 104, 105, 106, 107, 112, 113, 121, 128, on the new UN Global Technical Regulation on tyres, on Amendment 3 to UN GTR No. 4 with regard to the Worldwide Heavy-Duty Certification Procedure and on an amendment to Mutual Resolution No. 1
/* COM/2014/0647 final - 2014/0299 (NLE) */
Proposal for a COUNCIL DECISION establishing the position to be adopted on the Union's behalf in the relevant Committees of the United Nations Economic Commission for Europe as regards the proposals for amendments to UN Regulations Nos. 4, 6, 11, 13, 13H, 19, 25, 34, 37, 43, 44, 48, 53, 70, 96, 98, 104, 105, 106, 107, 112, 113, 121, 128, on the new UN Global Technical Regulation on tyres, on Amendment 3 to UN GTR No. 4 with regard to the Worldwide Heavy-Duty Certification Procedure and on an amendment to Mutual Resolution No. 1 /* COM/2014/0647 final - 2014/0299 (NLE) */
EXPLANATORY MEMORANDUM 1. CONTEXT OF THE PROPOSAL At international level, the United Nations
Economic Commission for Europe (UNECE) develops harmonised requirements
intended to remove technical barriers to the trade in motor vehicles between
the Contracting Parties to the Revised 1958 Agreement and to ensure that such
vehicles offer a high level of safety and environmental protection. In accordance with Council Decision
97/836/EC of 27 November 1997 the Union acceded to the Agreement of the United
Nations Economic Commission for Europe (“UNECE”) concerning the adoption of
uniform technical prescriptions for wheeled vehicles, equipment and parts which
can be fitted to and/or be used on wheeled vehicles and the conditions for
reciprocal recognition of approvals granted on the basis of these prescriptions[1] (“Revised 1958
Agreement”), and in accordance with Council Decision 2000/125/EC of 31 January
2000 concerning the conclusion of the Agreement concerning the establishing of
Global Technical Regulations for wheeled vehicles, equipment and parts which
can be fitted and/or be used on wheeled vehicles[2]
("Parallel Agreement"), the Union acceded to the Parallel Agreement. The meetings of UNECE WP29, the World Forum
for Harmonisation of Vehicle Regulations, are held three times in March, June
and November of each calendar year. In each meeting session new amendments to
existing UN Regulations or UN Global Technical Regulations (GTRs) are adopted
in order to allow for technical progress. Prior to each WP29 meeting these
amendments were adopted by one of the six working groups (GRs) that are active
under WP29. Subsequently, in a WP29 meeting the final
vote for adoption of the amendments, supplements and corrigenda takes place,
provided the quorum is reached and there is a qualified majority among
contracting parties. The EU is a contracting party to two Agreements (1958 and
1998 Agreements) under WP29. A Council Decision, referred to as "mega
decision", containing the list of amendments, supplements and corrigenda,
is prepared each time and authorises the Commission to vote on behalf of the Union
in each WP29 meeting. This Council Decision defines the Union's
position in the voting of the amendments, supplements and corrigenda submitted
for vote in the November 2014 WP29 meeting that will take place on 11 to 14 November
2014. 2. RESULTS OF CONSULTATIONS
WITH THE INTERESTED PARTIES AND IMPACT ASSESSMENTS The Technical Committee - Motor Vehicles
has been consulted and the comments from Member State experts have been taken into
account. 3. LEGAL ELEMENTS OF THE
PROPOSAL ·
Summary of the proposed action The
proposal defines the Union's position in the voting of the amendments to UN
Regulations Nos. 4, 6, 11, 13, 13H, 19, 25, 34, 37, 43, 44, 48, 53, 70, 96, 98,
104, 105, 106, 107, 112, 113, 121, 128, on the new UN Global Technical
Regulation on tyres, on Amendment 3 to UN GTR No. 4 with regard to the Worldwide
Heavy-Duty Certification Procedure and on Amendment 3 to UN Mutual Resolution
No. 1. ·
Legal basis The legal basis for this proposal is
Article 114, in conjunction with Article 218(9) of the Treaty on the
Functioning of the European Union. ·
Subsidiarity principle The vote in favour of international
instruments like proposals for amendments to UN Regulations and draft Global
Technical Regulations and their incorporation into the Union system for the
type-approval of motor vehicles can only be done by the Union. This does not
only prevent fragmentation of the Internal Market, but also ensures equal
health and safety standards across the Union. It also offers advantages of
economies of scale: products can be made for the entire Union market and even
the international market, instead of being customised to obtain national
type-approval for every single Member State. This proposal therefore complies with the
subsidiarity principle. ·
Proportionality principle This proposal complies with the
proportionality principle as it does not go beyond what is necessary in order
to achieve the objectives of ensuring the proper functioning of the Internal
Market, while at the same time providing for a high level of public safety and
protection. ·
Choice of instruments The use of a Council Decision is required
by Article 218(9) TFEU in order to establish the positions to be adopted on the
Union’s behalf in a body set up by an international agreement. 2014/0299 (NLE) Proposal for a COUNCIL DECISION
establishing the position to be adopted on the Union's behalf in the relevant
Committees of the United Nations Economic Commission for Europe as regards the
proposals for amendments to UN Regulations Nos. 4, 6, 11, 13, 13H, 19, 25, 34,
37, 43, 44, 48, 53, 70, 96, 98, 104, 105, 106, 107, 112, 113, 121, 128, on the
new UN Global Technical Regulation on tyres, on Amendment 3 to UN GTR No. 4
with regard to the Worldwide Heavy-Duty Certification Procedure and on an
amendment to Mutual Resolution No. 1 THE COUNCIL OF THE EUROPEAN UNION, Having regard to the Treaty on the
Functioning of the European Union, and in particular Article 114, in
conjunction with Article 218(9) thereof, Having regard to the proposal from the
European Commission, Whereas: (1) In accordance with Council Decision 97/836/EC[3], the Union acceded to
the Agreement of the United Nations Economic Commission for Europe (UNECE)
concerning the adoption of uniform technical prescriptions for wheeled
vehicles, equipment and parts which can be fitted to and/or be used on wheeled
vehicles and the conditions for reciprocal recognition of approvals granted on
the basis of these prescriptions (‘Revised 1958 Agreement’). (2) In accordance with Council Decision 2000/125/EC[4], the Union acceded to
the Agreement concerning the establishing of global technical regulations for
wheeled vehicles, equipment and parts which can be fitted and/or be used on
wheeled vehicles (‘Parallel Agreement’). (3) Directive 2007/46/EC of the European Parliament and of the
Council[5]
replaced the approval systems of the Member States with a Union approval
procedure and established a harmonised framework containing administrative
provisions and general technical requirements for all new vehicles, systems,
components and separate technical units. That Directive incorporated UN
regulations in the EU type-approval system, either as requirements for
type-approval or as alternatives to Union legislation. Since the adoption of that
Directive, UN regulations have increasingly replaced Union legislation in the
framework of the EU type-approval. (4) In the light of experience and technical developments, the
requirements relating to certain elements or features covered by UN Regulations
Nos. 4, 6, 11, 13, 13H, 19, 25, 34, 37, 43, 44, 48, 53, 70, 96, 98, 104, 105,
106, 107, 112, 113, 121, 128 need to be adapted. (5) In order to harmonise the relevant safety provisions for
the type-approval of motor vehicles, the new UN Global Technical Regulation on
tyres should be adopted. Amendment 3 to UN GTR No. 4 with regard to the
Worldwide Heavy-Duty Certification Procedure and an amendment to Mutual
Resolution No. 1 need to be adopted to reflect technical progress. (6) It is therefore necessary to establish the position to be
adopted on the Union's behalf in the Administrative Committee of the Revised
1958 Agreement and in the Executive Committee of the Parallel Agreement, as
regards the adoption of those UN acts, HAS ADOPTED THIS DECISION: Sole Article The position to be adopted on the Union's
behalf in the Administrative Committee of the Revised 1958 Agreement and in the
Executive Committee of the Parallel Agreement on 11 to 14
November 2014 shall be to vote in favour of the UN acts listed in the Annex to
this Decision. Done at Brussels, For
the Council The
President [1] OJ L 346, 17.12.1997, p. 78. [2] OJ L 35, 10.2.2000, p. 12. [3] Council Decision 97/836/EC of 27 November 1997 with a
view to accession by the European Community to the Agreement of the United
Nations Economic Commission for Europe concerning the adoption of uniform
technical prescriptions for wheeled vehicles, equipment and parts which can be
fitted to and/or be used on wheeled vehicles and the conditions for reciprocal
recognition of approvals granted on the basis of these prescriptions ('Revised
1958 Agreement') (OJ L 346, 17.12.1997, p. 78). [4] Council Decision 2000/125/EC of 31 January 2000
concerning the conclusion of the Agreement concerning the establishing of
global technical regulations for wheeled vehicles, equipment and parts which
can be fitted and/or be used on wheeled vehicles ('Parallel Agreement') (OJ L
35, 10.2.2000, p. 12). [5] Directive 2007/46/EC of the European Parliament and
of the Council of 5 September 2007 establishing a framework for the approval of
motor vehicles and their trailers, and of systems, components and separate
technical units intended for such vehicles (Framework Directive) (OJ L 263,
9.10.2007, p. 1). ANNEX Proposal for Supplement 18 to Regulation No. 4 (Rear registration plate lamps) || ECE/TRANS/WP.29/2014/54 Proposal for Supplement 26 to the 01 series of amendments to Regulation No. 6 (Direction indicators) || ECE/TRANS/WP.29/2014/55 Proposal for the 04 series of amendments to Regulation No. 11 (Door latches and hinges) || ECE/TRANS/WP.29/2014/71 Proposal for Supplement 12 to the 11 series of amendments to Regulation No. 13 (Heavy vehicle braking) || ECE/TRANS/WP.29/2014/45/Rev.1 Proposal for Supplement 16 to Regulation No. 13‑H (Brakes of M1 and N1 vehicles) || ECE/TRANS/WP.29/2014/46/Rev.1 Proposal for Supplement 7 to the 04 series of amendments to Regulation No. 19 (Front fog lamps) || ECE/TRANS/WP.29/2013/75/Rev.1 Proposal for Supplement 1 to the 04 series of amendments to Regulation No. 25 (Head restraints) || ECE/TRANS/WP.29/2014/72 Proposal for the 03 series of amendments to Regulation No. 34 (Prevention of fire risks) || ECE/TRANS/WP.29/2014/65 WP.29-164-05 Proposal for Supplement 43 to the 03 series of amendments to Regulation No. 37 (Filament lamps) || ECE/TRANS/WP.29/2014/56 Proposal for Supplement 3 to the 01 series of amendments to Regulation No. 43 (Safety glazing) || ECE/TRANS/WP.29/2014/66 Proposal for Supplement 3 to the 01 series of amendments to Regulation No. 43 (Safety glazing) || ECE/TRANS/WP.29/2014/67 Proposal for Supplement 9 to the 04 series of amendments to Regulation No. 44 (Child Restraint Systems) || ECE/TRANS/WP.29/2014/73 Proposal for Supplement 14 to the 04 series of amendments to Regulation No. 48 (Installation of lighting and light-signalling devices) || ECE/TRANS/WP.29/2014/57 Proposal for Supplement 7 to the 05 series of amendments to Regulation No. 48 (Installation of lighting and light-signalling devices) || ECE/TRANS/WP.29/2014/58 Proposal for Supplement 5 to the 06 series of amendments to Regulation No. 48 (Installation of lighting and light-signalling devices) || ECE/TRANS/WP.29/2014/59 Proposal for Supplement 16 to the 01 series of amendments to Regulation No. 53 (Installation of lighting and light-signalling devices for L3 vehicles) || ECE/TRANS/WP.29/2014/60 Proposal for Supplement 9 to the 01 series of amendments to Regulation No. 70 (Rear marking plates for heavy and long vehicles) || ECE/TRANS/WP.29/2014/61 Proposal for Supplement 1 to the 04 series of amendments to UN Regulation No. 96 (Diesel emission (agricultural tractors)) || ECE/TRANS/WP.29/2014/75 Proposal for Supplement 5 to the 01 series of amendments to Regulation No. 98 (Headlamps with gas-discharge light sources) || ECE/TRANS/WP.29/2013/90/Rev.1 Proposal for Supplement 8 to Regulation No. 104 (Retro-reflective markings) || ECE/TRANS/WP.29/2014/62 Proposal for Supplement 2 to the 05 series of amendments to Regulation No. 105 (ADR vehicles) || ECE/TRANS/WP.29/2014/68 Proposal for Supplement 11 to Regulation No. 106 (Tyres for agricultural vehicles) || ECE/TRANS/WP.29/2014/50/Rev.1 Proposal for Supplement 2 to the 05 series of amendments to Regulation No. 107 (M2 and M3 vehicles) || ECE/TRANS/WP.29/2014/69 Proposal for Supplement 1 to the 06 series of amendments to Regulation No. 107 (M2 and M3 vehicles) || ECE/TRANS/WP.29/2014/70 Proposal for Supplement 5 to the 01 series of amendments to Regulation No. 112 (Headlamps emitting an asymmetrical passing-beam) || ECE/TRANS/WP.29/2013/92/Rev.1 Proposal for Supplement 4 to the 01 series of amendments to Regulation No. 113 (Headlamps emitting a symmetrical passing-beam) || ECE/TRANS/WP.29/2014/63 Proposal for Supplement 4 to the 01 series of amendments to Regulation No. 113 (Headlamps emitting a symmetrical passing-beam) || ECE/TRANS/WP.29/2013/93/Rev.1 Proposal for the 01 series of amendments to Regulation No. 121 (Identification of controls, tell-tales and indicators) || ECE/TRANS/WP.29/2012/30 ECE/TRANS/WP.29/2012/30/Corr.1 Proposal for Supplement 3 to Regulation No. 128 (LED light sources) || ECE/TRANS/WP.29/2014/64 Proposal for a new draft gtr on tyres || ECE/TRANS/WP.29/2013/63 ECE/TRANS/WP.29/2014/83 ECE/TRANS/WP.29/2013/122 ECE/TRANS/WP.29/AC.3/15 WP.29-164-04 Proposal for Amendment 3 to gtr No. 4 (Worldwide Heavy-Duty Certification procedure (WHDC)) || ECE/TRANS/WP.29/2014/84 ECE/TRANS/WP.29/2014/85 ECE/TRANS/WP.29/AC.3/29 Proposal for amendments to Mutual Resolution No. 1 (M.R.1) || ECE/TRANS/WP.29/2014/89