31992R3639

COUNCIL REGULATION (EEC) No 3639/92 of 14 December 1992 temporarily suspending the autonomous Common Customs Tariff duty on certain industrial products (in the chemical and allied sectors)

THE COUNCIL OF THE EUROPEAN COMMUNITIES,

Having regard to the Treaty establishing the European Economic Community, and in particular Article 28 thereof,

Having regard to the proposal from the Commission,

Whereas production of the products referred to in this Regulation is at present inadequate or non-existent within the Community and producers are thus unable to meet the needs of user industries in the Community;

Whereas it is in the Community's interest in certain cases to suspend the autonomous Common Customs Tariff duties only partially, particularly because of the existence of Community production, and in other cases to suspend them completely;

Whereas the decision for the suspension of these autonomous duties should be taken by the Community;

Whereas, taking account of the difficulties involved in accurately assessing the development of the economic situation in the sectors concerned in the near future, these suspension measures should be taken only temporarily, by fixing their period of validity by reference to the interests of Community production,

HAS ADOPTED THIS REGULATION:

Article 1

The autonomous Common Customs Tariff duties for the products listed in the Annex shall be suspended at the level indicated in respect of each of them.

These suspensions shall apply from 1 January to 30 June 1993.

Article 2

This Regulation shall enter into force on 1 January 1993.

This Regulation shall be binding in its entirety and directly applicable in all Member States.

Done at Brussels, 14 December 1992.

For the Council The President N. LAMONT

ANNEX

ex 2712 90 9020Blend of 1-alkenes containing by weight 80 % or more of 1-alkenes of a chain-length of 24 carbon atoms or more but not exceeding 28 carbon atoms0ex 2809 20 0010Orthophosphoric acid, in the form of an aqueous solution containing:

-85 % by weight of orthophosphoric acid,

-0,1 mg/kg or less of sodium,

-0,1 mg/kg or less of potassium,

-0,5 mg/kg or less of iron,

-1,0 mg/kg or less of calcium

and

-50 000 particles or less per litre, of a size exceeding 0,5 micrometre,

for use in the manufacture of goods of heading No 8542 (a)0ex 2903 59 0020Hexachlorocyclopentadiene0ex 2904 20 90402-Nitropropane0ex 2905 16 9010Octan-2-ol02905 21 00Allyl alcohol0ex 2906 29 90102,2& prime;-(m-Phenylene)dipropan-2-ol0ex 2907 21 0010Resorcinol0ex 2914 69 0040Idebenone (INN)0ex 2916 20 0010Methyl 3-(2,2-dichlorovinyl)-2,2-dimethylcyclopropanecarboxylate0ex 2916 39 00203,5-Dichlorobenzoyl chloride3,6ex 2917 39 9080Dibenzyl terephthalate0ex 2918 29 30102-Ethylhexyl 4-hydroxybenzoate0ex 2920 90 8060Tetraethyl orthosilicate, of a purity by weight of 99,99 % or more and containing:

-1,0 microgram/kg or less of calcium,

-1,0 microgram/kg or less of chromium,

-2,0 micrograms/kg or less of iron

and

-2,0 micrograms/kg or less of sodium,

for use in the manufacture of goods of heading No 8542 (a)0ex 2921 49 1020Pendimethalin (ISO)3,5ex 2922 19 0050Tulobuterol hydrochloride (INNM)0ex 2924 10 0030N-(1,1-Dimethyl-3-oxobutyl)acrylamide0ex 2925 19 9010N-Phenylmaleimide0ex 2929 10 0040trans-(Cyclohex-1,4-ylene diisocyanate), for the manufacture of thermoplastic polyurethane elastomers (a)0ex 2930 90 80154-[4-(1-Methylethoxy)phenylsulphonyl]phenol0ex 2931 00 9040Chlorodiphenylphosphine0ex 2931 00 9050Bis(2-chloroethyl) 2-chloroethylphosphonate0ex 2932 29 90612& prime;-Anilino-3& prime;-methyl-6& prime;-methyl(propyl)aminospiro[isobenzofuran-1(3H),9& prime;-xanthen]-3-one0ex 2932 29 90626& prime;-Diethylamino-3& prime;-methyl-2& prime;-(2,4-xylidino)spiro[isobenzofuran-1(3H),9& prime;-xanthen]-3-one0ex 2933 29 9020Reaction product consisting of the methyl esters of (+/-)-6-(4-isopropyl-4-methyl-5-oxo-2-imidazolin-2-yl)-m-toluic acid and (+/-)-2-(4-isopropyl-4-methyl-5-oxo-2-imidazolin-2-yl)-p-toluic acid

(Imazamethabenz-methyl)4ex 2933 39 8022Nicorandil (INN)0ex 2933 39 80235-Methyl-2-pyridylamine0ex 2933 39 8024Fluroxypyr (ISO), methyl ester4ex 2935 00 0070Methyl 2-[4-methoxy-6-methyl-1,3,5-triazin-2-yl(methyl)carbamoylsulphamoyl]benzoate (Tribenuron-methyl)3,3ex 2935 00 0075Methyl 2-(4-methoxy-6-methyl-1,3,5-triazin-2-ylcarbamoylsulphamoyl)benzoate (Metsulfuron-methyl)3,3ex 2935 00 0080Methyl 3-(4-methoxy-6-methyl-1,3,5-triazin-2-ylcarbamoylsulfamoyl)thiophenecarboxylate (Thifensulfuron-methyl)3,3ex 2935 00 0085Chlorsulfuron (ISO)3,3ex 2941 90 0003Amphotericin B (INN)0ex 2941 90 0018Latamoxef (INN) and its salts and esters0ex 2941 90 0025Sisomycin sulphate (INNM)0ex 2941 90 0041Pirarubicin (INN)0ex 2941 90 0042Rokitamycin (INN)2,7ex 2941 90 00441-(Isopropoxycarbonyloxy)ethyl ester of cefpodoxime (INN)0ex 3002 10 9930Plasma, frozen, derived from the blood of horses, for the manufacture of serum gonadotrophin (INN) (a)0ex 3002 90 9010Purified lysate of the Human Immunodeficiency Virus, obtained from human T-cells infected with the Gallo HTLV-IIIb strain0ex 3003 39 0010Mixture of oestrogens of equine origin, in the form of powder0ex 3004 90 9910Carboplatin (INN) mixed with mannitol0ex 3207 40 9010Glass, in the form of flakes of a length of 0.1 mm or more but not exceeding 3,5 mm and of a thickness of 2 micrometres or more but not exceeding 5 micrometres0ex 3208 90 10 ex 3911 90 9020

86 Copolymer of p-cresol and divinylbenzene, in the form of a solution in N,N-dimethylacetamide containing by weight 48 % or more of polymer0ex 3402 90 9010Crystalline powder obtained by the reaction of trisodium phosphate with a mixture of sodium hypochlorite and sodium chloride ('chlorinated trisodium phosphate'), containing by weight:

-3,5 % or more of available chlorine, measured iodometrically

and

-17,0 % or more of phosphorus evaluated as P2O50ex 3507 90 0080L-Lactate: oxygen-2-oxidoreductase, non-decarboxylating0ex 3815 90 0055Catalyst, in the form of rodlets of a length of 5 mm or more but not exceeding 8 mm, consisting of a mixture of oxides of iron, molybdenum and bismuth, for use in the manufacture of acrylic acid (a)0ex 3815 90 0086Catalyst based on a mordenite zeolite, in the form of granules, for use in the manufacture of mixtures of methylamines containing by weight 50 % or more of dimethylamine (a)0ex 3823 90 9109Intermediate products of the antibiotics manufacturing process obtained from the fermentation of Micromonospora inyoensis, whether or not dried0ex 3823 90 9851Acid-hydrolysed casein, containing by weight:

-8 % or more but not more than 11 % of nitrogen

and

-10 % or more but not more than 20 % of sodium chloride,

for the manufacture of prepared culture media for development of micro-organisms (a)0ex 3823 90 9852Preparation consisting by weight of 90 % or more of 3a,4,7,7a-tetrahydro-4,7-methanoindene (dicyclopentadiene), a synthetic rubber and

-either an aluminium-alkyl compound

-or an organic complex of tungsten0ex 3901 20 0010Polyethylene, in one of the forms mentioned in note 6 (b) to Chapter 39, of a specific gravity of 0,945 or more but not exceeding 0,985, for the manufacture of typewriter ribbon or similar ribbon (a)0ex 3901 90 0092Ionomer resin consisting of a salt of a copolymer of ethylene with methacrylic acid4ex 3903 90 0020Copolymer, entirely of styrene with maleic anhydride, or entirely of styrene with maleic anhydride and an acrylic monomer, whether or not containing a styrene-butadiene block copolymer, in one of the forms mentioned in note 6 (b) to Chapter 39, for the manufacture of sheetings for head-liners for cars (a)0ex 3907 20 9060a-4-Hydroxybutyl-o-hydroxypoly(oxytetramethylene), containing less than 1 mg/kg of halogen and less than 1 mg/kg of metal, and of a colour not exceeding 20 units on the Hazen scale0ex 3907 99 0040Poly(ethylene naphthalene-2,6-dicarboxylate)0ex 3911 90 1010Poly(oxy-1,4-phenylenesulphonyl-1,4-phenyleneoxy-1,4-phenyleneisopropylidene-1,4-phenylene), in one of the forms mentioned in note 6 (b) to Chapter 393,5ex 3913 90 8030Chondroitinsulphuric acid, sodium salt0ex 3919 90 31 ex 3920 62 00 ex 3921 90 1930

05

60 Polyethylene terephthalate film, dyed in the mass, of a thickness not exceeding 25 micrometres and metallized on one side6ex 3919 90 31 ex 3920 62 00 ex 3920 63 00 ex 3920 69 0040

13

30

30 Reflecting polyester sheeting embossed in a regular pyramidal pattern, for the manufacture of safety stickers and badges, safety clothing and accessories thereof, or of school satchels, bags or similar containers (a)0ex 3920 10 21 ex 3920 10 29 ex 3921 90 6094

93

26 Laminated sheet or strip consisting of a film composed of a blend of a copolymer of ethylene with vinyl acetate and a modified ethylene-propylene-elastomer (EPM) or a modified ethylene-propylene-diene elastomer (EPDM), coated or covered on both sides with a film of a copolymer of ethylene with vinyl acetate0ex 3920 62 0004Polyethylene terephthalate film, of a thickness of less than 10 micrometres, for the manufacture of video cassettes with a playing-time of 300 minutes at a tape-speed of 24 mm per second, or of digital audio cassettes (a)0ex 3920 62 0009Polyethylene terephthalate film, of a thickness of 100 micrometres or more but not exceeding 150 micrometres, for the manufacture of photopolymer printing plates (a)0ex 3920 62 0014Polyethylene terephthalate film, of a thickness of 20 micrometres or more but not exceeding 30 micrometres, coated on one side with silicone, for use in the manufacture of window safety-film (a)6,5ex 3920 62 00 ex 3921 90 1915

25 Film of polyethylene terephthalate, coated or covered on one side or on both sides with a layer of modified polyester, of a total thickness of 7 micrometres or more but not exceeding 11 micrometres, for the manufacture of video tapes with a magnetic layer of metallic pigments and a width of 8 mm or of 12,7 mm (a)0ex 3920 91 0091Polyvinyl butyral film having a graduated coloured band6ex 3920 91 0092Plasticized film of polyvinyl butyral, containing by weight:

-either 14,5 % or more but not more than 17,5 % of dihexyl adipate

-or 14,5 % or more but not more than 28,5 % of dibutyl sebacate0ex 3921 90 1935Composite plate of polycarbonate and polybutylene terephthalate, reinforced with glass fibres0ex 3921 90 1945Composite plate of polyethylene terephthalate or of polybutylene terephthalate, reinforced with glass fibres0ex 4823 90 9012Strips of paper glued to one another to form a honeycomb of a height not exceeding 13 cm, for agricultural purposes (a)0ex 7019 90 1011Non-textile glass fibres in which fibres of a diameter of less than 3,5 micrometres predominate0ex 7410 21 0010Sheet or plate of polytetrafluoroethylene, with aluminium oxide or titanium dioxide as a filler or reinforced with glass-fibre fabric, laminated on both sides with copper foil, or sheet of polyimide, laminated on one side or on both sides with copper foil0ex 7905 00 9010Plate of an alloy of zinc, ground and polished on one surface and coated with an epoxide resin on the other surface, of rectangular or square shape, of a length of 300 mm or more but not exceeding 2 000 mm and of a width of 300 mm or more but not exceeding 1 000 mm, and containing:

-10 mg/kg or less of iron,

-10 mg/kg or less of lead,

-700 mg/kg or more but not more than 900 mg/kg of aluminium

and

-500 mg/kg or more but not more than 900 mg/kg of magnesium,

for the manufacture of sensitised printing plates (a)0ex 8101 99 0010Disk (target) with deposition material, of tungsten or an alloy containing by weight 90 % of tungsten en 10 % titanium,

-containing 100 micrograms/kg or less of sodium

and

-mounted on a copper support,

for use in the manufacture of goods of heading No 8542 by sputtering (a)0ex 8108 90 9092Disk (target) with deposition material, of titanium,

-containing 50 micrograms/kg or less of sodium

and

-mounted on a copper support,

for use in the manufacture of goods of heading No 8542 by sputtering (a)0ex 8112 99 3010Alloy of niobium (columbium) and titanium, in the form of bars and rods0(a) Control of the use for this special purpose shall be carried out pursuant to the relevant Community provisions.