02022R0058-20220811

Ez a dokumentum az EUR-Lex webhelyről származik.

EUROPA
EUR-Lex kezdőlap
EUR-Lex - 02022R0058-20220811 - HU

Súgó

Tanácsok a kereséshez

Részletesebb keresési feltételekre van szüksége? Használja a következő keresési felületet: Részletes keresés

Dokumentum 02022R0058-20220811

Súgó

Egységes szerkezetbe foglalt szöveg: Commission Implementing Regulation (EU) 2022/58 of 14 January 2022 imposing a definitive anti-dumping duty on imports of certain grain-oriented flat-rolled products of silicon-electrical steel originating in the People’s Republic of China, Japan, the Republic of Korea, the Russian Federation and the United States of America following an expiry review pursuant to Article 11(2) of Regulation (EU) 2016/1036 of the European Parliament and of the Council

Hozzáférés az eredeti jogi aktushoz

(

A dokumentum hatályossági állapota Hatályos

)

11/08/2022

ELI: http://data.europa.eu/eli/reg_impl/2022/58/2022-08-11

A dokumentum kelte:: 11/08/2022
Hatálybalépés időpontja:: 11/08/2022

Kibocsátó vagy szerző:: Nem érhető el
Típus:: Consolidated text

Link
Link
Link: Az összes, ezt a dokumentumot idéző dokumentum kiválasztása
Egységes szerkezetbe foglalás: alap-jogiaktus:: 32022R0058

HTML

PDF

02022R0058 — EN — 11.08.2022 — 001.001

This text is meant purely as a documentation tool and has no legal effect. The Union's institutions do not assume any liability for its contents. The authentic versions of the relevant acts, including their preambles, are those published in the Official Journal of the European Union and available in EUR-Lex. Those official texts are directly accessible through the links embedded in this document

►B

COMMISSION IMPLEMENTING REGULATION (EU) 2022/58

of 14 January 2022

imposing a definitive anti-dumping duty on imports of certain grain-oriented flat-rolled products of silicon-electrical steel originating in the People’s Republic of China, Japan, the Republic of Korea, the Russian Federation and the United States of America following an expiry review pursuant to Article 11(2) of Regulation (EU) 2016/1036 of the European Parliament and of the Council

(OJ L 010 17.1.2022, p. 17)

Amended by:

		Official Journal
		No	page	date
►M1	COMMISSION IMPLEMENTING REGULATION (EU) 2022/1387 of 9 August 2022	L 208	5	10.8.2022

▼B

COMMISSION IMPLEMENTING REGULATION (EU) 2022/58

of 14 January 2022

Article 1

A definitive anti-dumping duty is imposed on imports of grain-oriented flat-rolled products of silicon-electrical steel, of a thickness of more than 0,16 mm, currently falling under CN codes ex 7225 11 00 (TARIC Codes 7225110011 , 7225110015 and 7225110019 ) and ex 7226 11 00 (TARIC codes 7226110012 , 7226110014 , 7226110016 , 7226110092 , 7226110094 and 7226110096 ) and originating in the People’s Republic of China, Japan, the Republic of Korea, the Russian Federation and the United States of America.

The amount of the definitive anti-dumping duty applicable to the product described in paragraph 1 and produced by the individually named companies as set out in paragraph 4 shall be the difference between the minimum import prices fixed in paragraph 3 and the net free-at-Union-frontier price, before duty, if the latter is lower than the former. No duty shall be collected where the net free-at-Union-frontier price is equal to or higher than the corresponding minimum import price fixed in paragraph 3. In no event shall the amount of the duty be higher than the ad valorem duty rates set in paragraph 4.

For the purpose of paragraph 2, the minimum import price set out in the table below shall apply. Where it is found, following post-importation verification, that the net free-at-Union-frontier price actually paid by the first independent customer in the Union (post-importation price) is below the net free-at-Union-frontier price, before duty, as resulting from the customs declaration, and the post-importation price is lower than the minimum import price, an amount of duty equivalent to the difference between the minimum import price set out in the table below and the post-importation price shall apply, unless the application of the ad valorem duty set out in paragraph 4 plus the post-importation price lead to an amount (price actually paid plus ad valorem duty) which remains below the minimum import price set out in the table below.

Countries concerned	Product range	Minimum Import Price (EUR/tonne net product weight)
People’s Republic of China, Japan, United States of America, Russian Federation, Republic of Korea	Products with a maximum core loss not higher than 0,9 W/kg	2 043
	Products with a maximum core loss higher than 0,9 W/kg but not higher than 1,05 W/kg	1 873
	Products with a maximum core loss higher than 1,05 W/kg	1 536

For the purpose of paragraph 2, the ad valorem duty rates set out in the table below shall apply.

Company	Ad Valorem Duty	TARIC additional code
Baoshan Iron Steel Co., Ltd, Shanghai; PRC	21,5 %	C039
Wuhan Iron Steel Co., Ltd, Wuhan, PRC	36,6 %	C056
JFE Steel Corporation, Tokyo, Japan	39,0 %	C040
Nippon Steel Sumitomo Metal Corporation, Tokyo, Japan	35,9 %	C041
POSCO, Seoul, Republic of Korea	22,5 %	C042
OJSC Novolipetsk Steel, Lipetsk; VIZ Steel, Ekaterinburg, Russian Federation	21,6 %	C043
▼M1
Cleveland-Cliffs Steel Corporation, Ohio, United States of America	22,0 %	C044
▼B

The rate of the definitive anti-dumping duty applicable to the product described in paragraph 1 and produced by any other company not specifically mentioned in paragraph 4 shall be the ad valorem duty as set out in the table below.

Company	Ad Valorem Duty	TARIC additional code
All other Chinese companies	36,6 %	C999
All other Japanese companies	39,0 %	C999
All other Korean companies	22,5 %	C999
All other Russian companies	21,6 %	C999
All other American companies	22,0 %	C999

The application of the measures for the companies mentioned in paragraph 4 shall be conditional upon presentation to the customs authorities of the Member States of a valid commercial invoice and a mill certificate, which shall to conform to the requirements as set out in respectively Annexes I and II. If neither the mill certificate nor the invoice is presented, the duty applicable to all other companies shall apply. This mill certificate shall list the actual maximum core loss for each coil in Watts per kilogram at a frequency of 50 Hz and a magnetic induction of 1,7 Tesla.

For the individually named producers and in cases where goods have been damaged before entry into free circulation and, therefore, the price actually paid or payable is apportioned for the determination of the customs value pursuant to Article 131(2) of Commission Implementing Regulation (EU) 2015/2447 ( 1 ), the minimum import price set out above shall be reduced by a percentage which corresponds to the apportioning of the price actually paid or payable. The duty payable will then be equal to the difference between the reduced minimum import price and the reduced net, free-at-Union-frontier price, before customs clearance.

For all other companies and in cases where goods have been damaged before entry into free circulation and, therefore, the price actually paid or payable is apportioned for the determination of the customs value pursuant to Article 131(2) of Implementing Regulation (EU) 2015/2447, the amount of the anti-dumping duty, calculated on the basis of paragraph 2 above, shall be reduced by a percentage which corresponds to the apportioning of the price actually paid or payable.

Unless otherwise specified, the provisions in force concerning customs duties shall apply.

Article 2

This Regulation shall enter into force on the day following that of its publication in the Official Journal of the European Union.

This Regulation shall be binding in its entirety and directly applicable in all Member States.

ANNEX I

A declaration signed by an official of the entity issuing the commercial invoice, in the following format, must appear on the valid commercial invoice referred to in Article 1(6):

—

the name and function of the official of the entity issuing the commercial invoice,

—

the following declaration:

‘ I, the undersigned, certify that the (volume) and (core loss) of the grain oriented electrical steel sold for export to the European Union covered by this invoice was manufactured by (company name and address) (TARIC additional code) in (country concerned). I declare that the information provided in this invoice is complete and correct. ’

Date and signature.

ANNEX II

A declaration signed by an official of the entity issuing the mill certificate, in the following format, must appear on the valid mill certificate referred to in Article 1(6):

—

the name and function of the official of the entity issuing the mill certificate,

—

the following declaration:

‘ I, the undersigned, certify that the grain oriented electrical steel sold for export to the European Union covered by the mill certificate, showing the measurement of the maximum core loss in Watts per kilogram at a frequency of 50 Hz and a magnetic induction of 1,7 Tesla, and the size in mm was manufactured by (company name and address) (TARIC additional code) in (country concerned).I declare that the information provided in this mill certificate is complete and correct. ’

Date and signature.

( 1 ) Commission Implementing Regulation (EU) 2015/2447 of 24 November 2015 laying down detailed rules for implementing certain provisions of Regulation (EU) No 952/2013 of the European Parliament and of the Council laying down the Union Customs Code (OJ L 343, 29.12.2015, p. 558).

Az oldal tetejére

Valamennyi

Válassza ki azokat a kísérleti funkciókat, amelyeket ki szeretne próbálni