This document is an excerpt from the EUR-Lex website
Document C2004/306/09
Commission communication in the framework of the implementation of the 90/396/EECText with EEA relevance
Commission communication in the framework of the implementation of the 90/396/EECText with EEA relevance
Commission communication in the framework of the implementation of the 90/396/EECText with EEA relevance
ĠU C 306, 10.12.2004, p. 25–26
(ES, CS, DA, DE, ET, EL, EN, FR, IT, LV, LT, HU, NL, PL, PT, SK, SL, FI, SV)
|
10.12.2004 |
EN |
Official Journal of the European Union |
C 306/25 |
Commission communication in the framework of the implementation of the 90/396/EEC
(2004/C 306/09)
(Text with EEA relevance)
Publication of titles and references of harmonised standards under the Directive
|
ESO |
Reference and title of the harmonised standard (and reference document) |
Reference of superseded standard |
Date of cessation of presumption of conformity of superseded standard Note 1 |
|
CEN |
EN 30-2-1:1998/A1:2003 Domestic cooking appliances burning gas — Part 2-1: Rational use of energy — General |
EN 30-2-1:1998 Note 3 |
The date of this publication |
|
CEN |
EN 126:2004 Multifunctional controls for gas burning appliances |
EN 126:1995 |
The date of this publication |
|
CEN |
EN 298:2003 Automatic gas burner control systems for gas burners and gas burning appliances with or without fans |
EN 298:1993 |
30.9.2006 |
|
CEN |
EN 461:1999/A1:2004 Specification for dedicated liquefied petroleum gas appliances — Flueless non-domestic space heaters not exceeding 10 kW |
EN 461:1999 Note 3 |
The date of this publication |
|
CEN |
EN 1596:1998/A1:2004 Specification for dedicated liquefied petroleum gas appliances — Mobile and portable non-domestic forced convection direct fired air heaters |
EN 1596:1998 Note 3 |
The date of this publication |
|
CEN |
EN 12067-2:2004 Gas/air ratio controls for gas burners and gas burning appliances — Part 2: Electronic types |
|
|
|
CEN |
EN 12864:2001 Low-pressure, non adjustable regulators having a maximum outlet pressure of less than or equal to 200 mbar, with a capacity of less than or equal to 4 kg/h, and their associated safety devices for butane, propane or their mixtures |
|
|
|
EN 12864:2001/A1:2003 Low-pressure, non adjustable regulators having a maximum outlet pressure of less than or equal to 200 mbar, with a capacity of less than or equal to 4 kg/h, and their associated safety devices for butane, propane or their mixtures |
EN 12864:2001 Note 3 |
The date of this publication |
|
|
CEN |
EN 13786:2004 Automatic change-over valves having a maximum outlet pressure of up to and including 4 bar with a capacity of up to and including 100 kg/h, and their associated safety devices for butane, propane or their mixtures |
|
|
Note 1 Generally the date of cessation of presumption of conformity will be the date of withdrawal (dow), set by the European Standardisation Organisation, but attention of users of these standards is drawn to the fact that in certain exceptional cases this can be otherwise.
Note 2.1 The new (or amended) standard has the same scope as the superseded standard. On the date stated, the superseded standard ceases to give presumption of conformity with the essential requirements of the directive.
Note 2.2 The new standard has a broader scope than the superseded standard. On the date stated the superseded standard ceases to give presumption of conformity with the essential requirements of the directive.
Note 2.3 The new standard has a narrower scope than the superseded standard. On the date stated the (partially) superseded standard ceases to give presumption of conformity with the essential requirements of the directive for those products that fall within the scope of the new standard. Presumption of conformity with the essential requirements of the directive for products that still fall within the scope of the (partially) superseded standard, but that do not fall within the scope of the new standard, is unaffected.
Note 3 In case of amendments, the referenced standard is EN CCCCC:YYYY, its previous amendments, if any, and the new, quoted amendment. The superseded standard (column 3) therefore consists of EN CCCCC:YYYY and its previous amendments, if any, but without the new quoted amendment. On the date stated, the superseded standard ceases to give presumption of conformity with the essential requirements of the directive.
NOTE:
|
— |
Any information concerning the availability of the standards can be obtained either from the European Standardisation Organisations or from the national standardisation bodies of which the list is annexed to Directive 98/34/EC (2) of the European Parliament and Council as amended by Directive 98/48/EC (3). |
|
— |
Publication of the references in the Official Journal of the European Union does not imply that the standards are available in all the Community languages. |
|
— |
More information about harmonised standards on the Internet at http://europa.eu.int/comm/enterprise/newapproach/standardization/harmstds/ |
(1) ESO: European Standardisation Organisation:
|
— |
CEN: rue de Stassart 36, B-1050 Brussels, Tel. (32-2) 550 08 11; fax (32-2) 550 08 19 (http://www.cenorm.be) |
|
— |
Cenelec: rue de Stassart 35, B-1050 Brussels, Tel. (32-2) 519 68 71; fax (32-2) 519 69 19 (http://www.cenelec.org) |
|
— |
ETSI: 650, route des Lucioles, F-06921 Sophia Antipolis, Tel. (33) 492 94 42 00; fax (33) 493 65 47 16, (http://www.etsi.org) |
(2) OJ L 204, 21.7.1998, p. 37.
(3) OJ L 217, 5.8.1998, p. 18.