31980K0587

****

( 1 ) OJ NO L 231 , 13 . 9 . 1979 , P . 15 .

( 1 ) OJ NO L 344 , 31 . 12 . 1979 , P . 15 .

( 2 ) COMMUNICATION FROM THE COMMISSION CONCERNING THE PUBLICATION OF GUIDANCE PRICES FOR CERTAIN STEEL PRODUCTS ( OJ NO L 344 , 31 . 12 . 1979 , P . 13 ).

THESE PRODUCTS ARE : // - HOT-ROLLED COIL // CCT HEADING NO 73.08 ; //

- HOT-ROLLED STRIP // SUBHEADING 73.12 A . //

// - MEDIUM AND HEAVY PLATE , HOT-ROLLED OR CUT FROM HOT-ROLLED COIL , EX CCT SUBHEADING 73.13 B I A ) ( EXCLUDING THICKNESSES BELOW 3 MM ). //

- COLD-REDUCED SHEET , CCT SUBHEADING 73.13 B II B ) AND C ) //

- WIRE ROD , CCT SUBHEADING 73.10 A I //

// - SMOOTH CONCRETE // EX CCT SUBHEADING //

REINFORCING BARS // 73.10 A II //

- IMPROVED ADHESION // ( OMITTING ROUND //

CONCRETE REINFORCING // BILLETS //

BARS // FOR TUBE MAKING ) //

// - MERCHANT BARS //

- SECTIONS , BEAMS // CCT SUBHEADING 73.11 A I //

COMMISSION RECOMMENDATION NO 587/80/ECSC

OF 7 MARCH 1980

ON COMMUNITY SURVEILLANCE IN RESPECT OF THE IMPORTATION OF CERTAIN IRON AND STEEL PRODUCTS COVERED BY THE ECSC TREATY ORIGINATING IN NON-MEMBER COUNTRIES

THE COMMISSION OF THE EUROPEAN

COMMUNITIES ,

HAVING REGARD TO THE TREATY ESTABLISHING THE EUROPEAN COAL AND STEEL COMMUNITY , AND IN PARTICULAR ARTICLE 74 THEREOF ,

WHEREAS BY RECOMMENDATION NO 2002/79/ECSC ( 1 ) THE COMMISSION CONSOLIDATED WITHIN A SINGLE TEXT THE ARRANGEMENTS FOR ADVANCE SURVEILLANCE WHICH HAVE , SINCE 5 MAY 1977 , COVERED IMPORTS INTO THE COMMUNITY OF CERTAIN ECSC IRON AND STEEL PRODUCTS ORIGINATING IN NON-MEMBER COUNTRIES ;

WHEREAS , BEARING IN MIND RECENT TRENDS IN THE CONDITIONS UNDER WHICH CERTAIN OF THE PRODUCTS CONCERNED HAVE BEEN IMPORTED , IT IS ADVISABLE TO AMEND AND SUPPLEMENT THE TERMS OF THAT RECOMMENDATION ;

WHEREAS THESE ARRANGEMENTS ARE WITHOUT PREJUDICE TO THE MAINTENANCE BY CERTAIN MEMBER STATES OF QUANTITATIVE RESTRICTIONS ON CERTAIN OF THE PRODUCTS IN QUESTION IN RESPECT OF CERTAIN NON-MEMBER COUNTRIES ,

MAKES THE FOLLOWING RECOMMENDATION :

ARTICLE 1

1 . THE IMPORTATION INTO THE COMMUNITY OF THE IRON AND STEEL PRODUCTS COVERED BY THE ECSC TREATY LISTED IN ANNEX III A OR III B AND ORIGINATING IN NON-MEMBER COUNTRIES SHALL BE SUBJECT TO THE ISSUE OF AN IMPORT LICENCE .

SUCH LICENCE SHALL BE ISSUED OR ENDORSED BY THE MEMBER STATES , FREE OF CHARGE AND FOR ANY QUANTITIES REQUESTED , WITHIN NOT MORE THAN FIVE WORKING DAYS FROM THE SUBMISSION OF THE COMPLETED APPLICATION AND PRESENTATION OF A PHOTOCOPY OF THE RELEVANT PURCHASE CONTRACT OR CONTRACTS .

2 . THE APPLICATION OF PARAGRAPH 1 SHALL BE WITHOUT PREJUDICE TO THE MAINTENANCE OF QUANTITATIVE RESTRICTIONS IMPOSED BY CERTAIN MEMBER STATES ON CERTAIN IRON AND STEEL PRODUCTS IN RESPECT OF CERTAIN NON-MEMBER COUNTRIES .

3 . THE PERIOD OF VALIDITY OF THE IMPORT LICENCE IS HEREBY FIXED AT TWO MONTHS , WITHOUT PREJUDICE TO POSSIBLE CHANGES IN THE IMPORT ARRANGEMENTS IN FORCE .

4 . IMPORT LICENCES NOT USED BEFORE THEIR DATE OF EXPIRY SHALL BE RETURNED TO THE ISSUING OFFICE .

ARTICLE 2

1 . THE IMPORTER ' S APPLICATION MUST STATE FOR GOODS OF WHATEVER ORIGIN LISTED IN ANNEX III A OR III B :

( A ) THE COUNTRY OF ORIGIN AND THE COUNTRY OF CONSIGNMENT ;

( B ) THE COMMON CUSTOMS TARIFF SUBHEADING AND THE NIMEXE CODE ;

( C ) THE QUANTITY OF THE GOODS IN TONNES , INCLUDING TONNAGE OF INDIVIDUAL LOTS ;

( D ) THE NAME , ADDRESS , TELEPHONE NUMBER AND TELEX NUMBER OF THE IMPORTER ;

( E ) THE NAME , ADDRESS , TELEPHONE NUMBER AND TELEX NUMBER OF THE VENDOR ;

( F ) THE PROPOSED DATE AND PLACE ( CUSTOMS OFFICE ) OF IMPORTATION ;

( G ) THE POINT OF DELIVERY ;

( H ) THE DATE OF THE CONTRACT FOR THE PURCHASE OF THE GOODS AND THE CONTRACT NUMBER OR ANY OTHER REFERENCE GIVEN BY THE VENDOR BY WHICH THE DELIVERY IN QUESTION MAY BE IDENTIFIED ;

( I ) WHERE APPLICABLE , THAT THE GOODS IN QUESTION ARE INTENDED FOR PROCESSING UNDER CONTRACT AND SUBSEQUENT RE-EXPORT OUTSIDE THE COMMUNITY ( COUNTRY OF RE-EXPORT TO BE SPECIFIED ).

2 . THE FOLLOWING ADDITIONAL INFORMATION SHALL ALSO BE SUPPLIED WHEN A LICENCE TO IMPORT GOODS LISTED IN ANNEX III A IS APPLIED FOR .

A . FOR GOODS ORIGINATING IN AND CONSIGNED DIRECTLY FROM ONE OF THE COUNTRIES LISTED IN ANNEX II ( DIRECT IMPORTATION ):

( A ) A FULL COMMERCIAL DESCRIPTION OF THE GOODS , INCLUDING EXACT SPECIFICATIONS , SUFFICIENT TO PERMIT CALCULATION OF THE DELIVERED PRICE ACCORDING TO THE PRINTED PRICE LIST SELECTED ;

( B ) THE DELIVERED PRICE PER TONNE , INCLUDING CUSTOMS DUTIES , TRANSPORT COSTS TO POINT OF DELIVERY AND ALL EXTRAS , REBATES AND ANY OTHER FACTORS RELEVANT TO CALCULATION OF THE DELIVERED PRICE ;

( C ) DETAILS OF :

( I ) THE COMMUNITY PRODUCER ' S PRICE LIST CHOSEN FOR CALCULATING THE DELIVERED PRICE ; OR

( II ) WHERE APPROPRIATE THE NON-MEMBER COUNTRY OFFER ON WHICH THE TERMS OF THE DELIVERY HAVE BEEN ALIGNED , GIVING DETAILS SUFFICIENT TO IDENTIFY THE OFFER ; OR

( III ) WHERE APPROPRIATE OTHER PRICE ( TO BE JUSTIFIED );

( D ) THE DATE AND REFERENCE OF THE BILL OF LADING , IF AVAILABLE ;

B . FOR GOODS ORIGINATING IN ONE OF THE COUNTRIES LISTED IN ANNEX II BUT CONSIGNED FROM A NON-MEMBER COUNTRY OTHER THAN THE COUNTRY OF ORIGIN ( INDIRECT IMPORTATION ) AND FOR GOODS ORIGINATING IN A NON-MEMBER COUNTRY NOT LISTED IN ANNEXES I OR II ;

( A ) A COMPLETE DESCRIPTION CORRESPONDING TO THAT APPEARING IN THE LIST OF PRODUCTS SUBJECT TO BASIC PRICES ( 1 ),

( B ) THE PRICE FREE AT COMMUNITY FRONTIER , CIF , DUTY-PAID AND UNLOADED , PER TONNE , IN THE CURRENCY OF THE CONTRACT ;

C . FOR GOODS ORIGINATING IN ONE OF THE COUNTRIES LISTED IN ANNEX I :

I . PRODUCTS FOR WHICH THE COMMISSION HAS FIXED GUIDANCE PRICES ( 2 ):

( A ) A FULL COMMERCIAL DESCRIPTION OF THE GOODS , INCLUDING EXACT SPECIFICATIONS , SUFFICIENT TO PERMIT CALCULATION OF THE DELIVERED PRICE ACCORDING TO THE PRINTED PRICE LIST SELECTED ;

( B ) THE DELIVERED PRICE PER TONNE , INCLUDING CUSTOMS DUTIES , TRANSPORT COSTS TO POINT OF DELIVERY AND ALL EXTRAS , REBATES AND ANY OTHER FACTORS RELEVANT TO CALCULATION OF THE DELIVERED PRICE ;

( C ) DETAILS OF :

( I ) THE COMMUNITY PRODUCER ' S PRICE LIST CHOSEN FOR CALCULATING THE DELIVERED PRICE ; OR

( II ) WHERE APPROPRIATE THE NON-MEMBER COUNTRY OFFER ON WHICH THE TERMS OF THE DELIVERY HAVE BEEN ALIGNED , GIVING DETAILS SUFFICIENT TO IDENTIFY THE OFFER ;

( III ) ANY OTHER APPROPRIATE PRICE ( TO BE JUSTIFIED ).

II . PRODUCTS FOR WHICH THE COMMISSION HAS NOT PUBLISHED GUIDANCE PRICES :

AT THE OPTION OF THE IMPORTER :

EITHER

( A ) A COMPLETE DESCRIPTION CORRESPONDING TO THAT APPEARING IN THE LIST OF PRODUCTS SUBJECT TO BASIC PRICES ( 1 ); AND

( B ) THE PRICE FREE AT COMMUNITY FRONTIER , CIF , DUTY-PAID AND UNLOADED , PER TONNE , IN THE CURRENCY OF THE CONTRACT ;

OR

THE DETAILS REQUIRED UNDER PARAGRAPH 2 C I .

3 . IN ADDITION , THE IMPORTER SHALL DECLARE THAT NO REBATE WILL BE GRANTED THAT IS NOT MENTIONED IN THE PURCHASE CONTRACT OR CONTRACTS .

4 . THE IMPORTER SHALL CERTIFY THAT HIS APPLICATION FOR AN IMPORT DOCUMENT IS ACCURATE .

5 . THE IMPORTER SHALL STATE WHETHER HIS APPLICATION IS A REPEAT OF A PREVIOUS APPLICATION CONCERNING THE SAME DELIVERY .

ARTICLE 3

1 . THE MEMBER STATES SHALL COMMUNICATE TO THE COMMISSION , AS SOON AS SUCH INFORMATION IS ESTABLISHED BY THE COMPETENT AUTHORITIES , ANY DIFFERENCE BETWEEN THE BASIC PRICE PLUS ANY EXTRAS , AS PUBLISHED IN THE OFFICIAL JOURNAL OF THE EUROPEAN COMMUNITIES AND THE PRICE FREE AT COMMUNITY FRONTIER , CIF , DUTY PAID AND UNLOADED , IN EUROPEAN UNITS OF ACCOUNT PER TONNE , FOR THE FOLLOWING GOODS :

( I ) GOODS ORIGINATING IN ONE OF THE COUNTRIES LISTED IN ANNEX II , BUT CONSIGNED FROM A NON-MEMBER COUNTRY OTHER THAN THE COUNTRY OF ORIGIN ;

( II ) GOODS ORIGINATING IN NON-MEMBER COUNTRIES , OTHER THAN THOSE LISTED IN ANNEXES I AND II .

2 . WITHIN THE FIRST 10 DAYS OF EACH MONTH MEMBER STATES SHALL NOTIFY THE COMMISSION OF THE TONNAGE AND AMOUNTS ( CALCULATED ON THE BASIS OF THE BASIC CIF PRICES ) FOR WHICH IMPORT DOCUMENTS WERE ISSUED DURING THE PRECEDING MONTH .

3 . THE INFORMATION SUPPLIED BY MEMBER STATES SHALL INCLUDE :

( A ) A BREAKDOWN BY PRODUCT ( CCT SUBHEADING AND NIMEXE CODE );

( B ) A BREAKDOWN BY COUNTRY OF ORIGIN ;

( C ) WITHIN THE TOTAL OF ANY ONE PRODUCT ORIGINATING IN ANY ONE COUNTRY , THE QUANTITIES NOT IMPORTED DIRECTLY FROM THAT COUNTRY , AND , WHERE APPROPRIATE , A BREAKDOWN BY COUNTRY OR COUNTRIES OF CONSIGNMENT ;

( D ) THE QUANTITIES OF EACH PRODUCT RE-EXPORTED OUTSIDE THE COMMUNITY AFTER INWARD PROCESSING .

ARTICLE 4

FOR THE PURPOSES OF THIS RECOMMENDATION , THE COUNTRY OF CONSIGNMENT IS DEEMED TO BE THE LAST INTERMEDIATE NON-MEMBER COUNTRY IN WHICH THE PRODUCT IN QUESTION WAS THE SUBJECT OF ' ENTREPOT ' OPERATIONS OR LEGAL TRANSACTIONS NOT CONNECTED WITH ITS TRANSPORTATION .

ARTICLE 5

RECOMMENDATION NO 2002/79/ECSC IS HEREBY REPEALED .

ARTICLE 6

THIS RECOMMENDATION SHALL BE NOTIFIED TO THE MEMBER STATES AND PUBLISHED IN THE OFFICIAL JOURNAL OF THE EUROPEAN COMMUNITIES .

IT SHALL ENTER INTO FORCE FOR EACH MEMBER STATE ON THE DATE OF ITS PUBLICATION IN THE OFFICIAL JOURNAL OF THE EUROPEAN COMMUNITIES . IT SHALL APPLY UNTIL 31 DECEMBER 1980 .

DONE AT BRUSSELS , 7 MARCH 1980 .

FOR THE COMMISSION

WILHELM HAFERKAMP

VICE-PRESIDENT

****

ANNEX I

AUSTRIA

FINLAND

NORWAY

SWEDEN

ANNEX II

// AUSTRALIA // JAPAN //

BULGARIA // POLAND //

CZECHOSLOVAKIA // ROMANIA //

HUNGARY // SPAIN //

****

ANNEX III A

LIST OF PRODUCTS THE IMPORTATION OF WHICH IS SUBJECT TO THE ISSUE OF AN IMPORT DOCUMENT

( QUANTITY AND PRICE SURVEILLANCE )

// //

CCT //

HEADING // NIMEXE CODE // DESCRIPTION //

NO //

//

73.01 B // 73.01-21 ; 23 ; 25 ; 27 // HAEMATITE PIG IRON AND CAST IRON //

73.01 C // 73.01-31 ; 35 // PHOSPHORIC PIG IRON AND CAST IRON //

73.01 D // 73.01-41 ; 49 // PIG IRON AND CAST IRON OTHER THAN SPIEGELEISEN , HAEMATITE AND PHOSPHORIC PIG IRON AND CAST IRON //

73.02 A I // 73.02-11 // FERRO-MANGANESE CONTAINING MORE THAN 2 % BY WEIGHT OF CARBON ( HIGH CARBON FERRO-MANGANESE ) //

73.07 A I // 73.07-12 // BLOOMS AND BILLETS , OF IRON OR STEEL , ROLLED ( 1 ) //

73.07 B I // 73.07-21 ; 24 // SLABS AND SHEET BARS , OF IRON OR STEEL , ROLLED ( 1 ) //

73.08 // 73.08-01 ; 03 ; 05 ; 07 ; 21 ; 25 ; 29 ; 41 ; 45 ; 49 // IRON OR STEEL COILS FOR RE-ROLLING //

73.10 A I // 73.10-11 // WIRE ROD OF IRON OF STEEL //

73.10 A II // 73.10-13 // CONCRETE REINFORCING BARS OF IRON OR STEEL WITH MINOR INDENTATIONS , FLANGES , GROOVES OR OTHER DEFORMATIONS PRODUCED DURING THE ROLLING PROCESS , WHETHER OR NOT TWISTED AFTER ROLLING //

// 73.10-16 // CONCRETE REINFORCING BARS OF IRON OR STEEL OTHER THAN THOSE WITH MINOR INDENTATIONS , FLANGES , GROOVES OR OTHER DEFORMATIONS PRODUCED DURING THE ROLLING PROCESS //

// // BARS AND RODS OF IRON OR STEEL , NOT FURTHER WORKED THAN HOT-ROLLED OR EXTRUDED OTHER THAN CONCRETE REINFORCING BARS //

73.11 A I // 73.11-11 ; 12 ; 14 ; 16 ; 19 // ANGLES , SHAPES AND SECTIONS OF IRON OR STEEL , NOT FURTHER WORKED THAN HOT-ROLLED OR EXTRUDED //

73.12 A II // 73.12-19 // HOOP AND STRIP OF IRON OR STEEL , OTHER THAN ELECTRICAL , NOT FURTHER WORKED THAN HOT-ROLLED //

73.13 A II // 73.13-16 // ' ELECTRICAL ' SHEETS AND PLATES OF IRON OR STEEL , OTHER THAN WITH A WATT-LOSS , REGARDLESS OF THICKNESS , OF 0.75 WATT OR LESS //

73.13 B I A ) // 73.13-17 ; 19 ; 21 ; 23 ; 26 // SHEETS AND PLATES , OTHER THAN ' ELECTRICAL ' , NOT FURTHER WORKED THAN HOT-ROLLED , OF A THICKNESS OF 2 MM OR MORE //

73.13 B II B ) // 73.13-43 ; 45 // SHEETS AND PLATES , OTHER THAN ' ELECTRICAL ' , NOT FURTHER WORKED THAN COLD-ROLLED , OF A THICKNESS OF MORE THAN 1 MM BUT LESS THAN 3 MM //

73.13 B II C ) // 73.13-47 ; 49 // SHEETS AND PLATES , OTHER THAN ' ELECTRICAL ' , NOT FURTHER WORKED THAN COLD-ROLLED , OF A THICKNESS OF 1 MM OR LESS //

73.13 B IV C ) 1+2 // 73.13-67 ; 68 ; 72 // SHEETS AND PLATES , OTHER THAN ' ELECTRICAL ' , ZINC-COATED //

73.15 B I B ) 2 ( AA ) // 73.71-53 // BLOOMS , BILLETS , SLABS , SHEET BARS , OTHER THAN FORGED ( 1 ): //

// // - STAINLESS OR HEAT-RESISTING STEEL //

73.15 B V B ) 1 ( AA ) // 73.73-23 // WIRE ROD : //

// // - STAINLESS OR HEAT-RESISTING STEEL //

73.15 B V B ) 1 ( CC ) // 73.73-25 // WIRE ROD : //

// // - S , PB AND P STEELS //

73.15 B V B ) 1 ( DD ) // 73.73-26 // WIRE ROD : //

// // - MANGANO-SILICON //

73.15 B V B ) 1 ( EE ) // 73.73-29 // WIRE ROD : //

// // - OTHER ( EXCLUDING HIGH SPEED ) //

( 1 ) INCLUDES PRODUCTS OF THE SAME FORM IN CONTINUOUS CASTING . // 73.15 B V B ) 2 ( AA ) // 73.73-33 // HOT-ROLLED OR EXTRUDED BARS , RODS , ANGLES , SHAPES AND SECTIONS : //

// // - STAINLESS OR HEAT-RESISTING STEEL //

73.15 B V B ) 2 ( CC ) // 73.73-35 // HOT-ROLLED OR EXTRUDED BARS , RODS , ANGLES , SHAPES AND SECTIONS : //

// // - S , PB AND P STEELS //

73.15 B V B ) 2 ( DD ) // 73.73-36 // HOT-ROLLED OR EXTRUDED BARS , RODS , ANGLES , SHAPES AND SECTIONS : //

// // - MANGANO-SILICON //

73.15 B V B ) 2 ( EE ) // 73.73-39 // HOT-ROLLED OR EXTRUDED BARS , RODS , ANGLES , SHAPES AND SECTIONS : //

// // - OTHER ALLOY ( EXCLUDING HIGH SPEED ) //

73.15 B VII A ) 2 // 73.75-19 // ELECTRICAL SHEET AND PLATE IN ALLOY STEEL WITH A WATT LOSS , REGARDLESS OF THICKNESS OF GREATER THAN 0.75 WATT //

73.15 B VII B ) 1 ( AA ) 11 // 73.75-23 // HOT-ROLLED SHEETS AND PLATES OF A THICKNESS MORE THAN 4.75 MM : //

// // - STAINLESS OR HEAT-RESISTING //

73.15 B VII B ) 1 ( BB ) 11 // 73.75-33 // HOT-ROLLED SHEETS AND PLATES OF A THICKNESS NOT LESS THAN 3 MM BUT NOT MORE THAN 4.75 MM : //

// // - STAINLESS OR HEAT-RESISTING //

73.15 B VII B ) 1 ( CC ) 11 // 73.75-43 // HOT-ROLLED SHEETS AND PLATES OF A THICKNESS LESS THAN 3 MM : //

// // - STAINLESS OR HEAT-RESISTING //

73.15 B VII B ) 2 ( BB ) 11 // 73.75-63 // COLD-ROLLED SHEET OF A THICKNESS LESS THAN 3 MM : //

// // - STAINLESS OR HEAT-RESISTING //

****

ANNEX III B

LIST OF PRODUCTS FOR WHICH IMPORT IS SUBJECT TO ISSUE OF AN IMPORT DOCUMENT ( QUANTITY MONITORING )

// //

CCT HEADING NO // NIMEXE CODE // DESCRIPTION //

//

73.15 A I B ) 2 // 73.61-50 // BLOOMS , BILLETS , SLABS AND SHEET BARS OF HIGH CARBON STEEL , OTHER THAN FORGED ( 1 ): //

73.15 A V B ) 1 // 73.63-21 // WIRE ROD OF HIGH CARBON STEEL //

73.15 B I B ) 2 ( BB ) // 73.71-54 // BLOOMS , BILLETS , SLABS AND SHEET BARS : //

// // - HIGH SPEED STEEL ( 1 ) //

73.15 B I B ) 2 ( CC ) // 73.71-55 // BLOOMS , BILLETS , SLABS AND SHEET BARS : //

// // - S , PB AND P STEELS ( 1 ) //

73.15 B I B ) 2 ( DD ) // 73.71-56 // BLOOMS , BILLETS , SLABS AND SHEET BARS : //

// // - MANGANO-SILICON STEEL ( 1 ) //

73.15 B I B ) 2 ( EE ) // 73.71-59 // BLOOMS , BILLETS , SLABS AND SHEET BARS : //

// // - OTHER ALLOY STEEL ( 1 ) //

73.15 B V B ) 1 ( BB ) // 73.73-24 // WIRE ROD OF HIGH SPEED STEEL //

73.15 B V B ) 2 ( BB ) // 73.73-34 // HOT-ROLLED OR EXTRUDED BAR , ROD , ANGLES , SHAPES AND SECTIONS OF HIGH SPEED STEEL //

73.15 B VII B ) 1 ( AA ) 22 // 73.75-24 // HOT-ROLLED PLATE AND SHEET OF A THICKNESS MORE THAN 4.75 MM : //

// // - HIGH SPEED STEEL //

73.15 B VII B ) 1 ( AA ) 33 // 73.75-29 // HOT-ROLLED PLATE AND SHEET OF A THICKNESS MORE THAN 4.75 MM : //

// // - OTHER ALLOY ( EXCLUDING STAINLESS ) //

73.15 B VII B ) 1 ( BB ) 22 // 73.75-34 // HOT-ROLLED PLATE AND SHEET OF A THICKNESS NOT LESS THAN 3 MM BUT NOT MORE THAN 4.75 MM : //

// // - HIGH SPEED STEEL //

73.15 B VII B ) 1 ( BB ) 33 // 73.75-39 // HOT-ROLLED PLATE AND SHEET OF A THICKNESS NOT LESS THAN 3 MM BUT NOT MORE THAN 4.75 MM : //

// // - OTHER ALLOY ( EXCLUDING STAINLESS ) //

73.15 B VII B ) 1 ( CC ) 22 // 73.75-44 // HOT-ROLLED SHEET OF A THICKNESS LESS THAN 3 MM ; //

// // - HIGH SPEED STEEL //

73.15 B VII B ) 1 ( CC ) 33 // 73.75-49 // HOT-ROLLED SHEET OF A THICKNESS LESS THAN 3 MM ; //

// // - OTHER ALLOY ( EXCLUDING STAINLESS ) //

73.15 B VII B ) 2 ( BB ) 22 // 73.75-64 // COLD-ROLLED SHEET OF A THICKNESS LESS THAN 3 MM : //

// // - HIGH SPEED STEEL //

73.15 B VII B ) 2 ( BB ) 33 // 73.75-69 // COLD-ROLLED SHEET OF A THICKNESS LESS THAN 3 MM : //

// // - OTHER ALLOY ( EXCLUDING STAINLESS ) //

( 1 ) INCLUDES PRODUCTS OF THE SAME FORM IN CONTINUOUS CASTING