(a) ‘Kimberley Process’ means the forum in which the participants have designed an international certification scheme for rough diamonds;

(b) ‘Kimberley Process certification scheme’ (hereinafter ‘KP certification scheme’) means the international certification scheme negotiated by the Kimberley Process as set out in Annex I;

(c) ‘Participant’ means any State, regional economic integration organisation, WTO-member or separate customs territory that fulfils the requirements of the KP certification scheme, has notified that fact to the Chair of the KP certification scheme and is listed in Annex II;

(d) ‘certificate’ means a document duly issued and validated by a participant's competent authority identifying a shipment of rough diamonds as being in compliance with the requirements of the KP certification scheme;

(e) ‘competent authority’ means the authority designated by a participant to issue, validate or verify certificates;

(f) ‘Community authority’ means a competent authority designated by a Member State and listed in Annex III;

(g) ‘Community certificate’ means a certificate corresponding to the specimen in Annex IV and issued by a Community authority;

(h) ‘conflict diamonds’ means rough diamonds as defined under the KP Certification Scheme;

(i) ‘rough diamond’ means a diamond that is unworked or simply sawn, cleaved or bruted and falls under the Harmonised Commodity Description and Coding System 710210, 710221 and 710231 (hereinafter ‘HS code’);

(j) ‘imports’ means the physical entering or bringing into any part of the geographical territory of a participant;

(k) ‘export’ means the physical leaving or taking out of any part of the geographical territory of a participant;

(l) ‘shipment’ means one or more parcels;

(m) ‘parcel’ means one or more diamonds that are packed together;

(n) ‘parcel of mixed origin’ means a parcel that contains rough diamonds from two or more countries of origin;

(o) ‘Community territory’ means the territories of the Member States to which the Treaty is applicable, under the conditions laid down in that Treaty;

(p) ‘Certified stock’ means a stock of rough diamonds to which this Regulation applies, and whose location, volume and value, and changes therein, have been submitted to effective supervision of a Member State;

(q) ‘Customs transit’ means transit as provided for by Articles 91 to 97 of Council Regulation (EEC) No 2913/92 of 12 October 1992 establishing the Community Customs Code ( 3 ).

(a) the rough diamonds are accompanied by a certificate validated by the competent authority of a participant;

(b) the rough diamonds are contained in tamper-resistant containers, and the seals applied at export by that participant are not broken;

(c) the certificate clearly identifies the consignment to which it refers.

(a) it will open each container with a view to such verification; or

(b) it will identify the containers to be opened with a view to such verification on the basis of a risk analysis or equivalent system that gives due consideration to rough diamond shipments.

(a) fulfilled, it shall confirm this on the original certificate and provide the importer with an authenticated and forgery-resistant copy of that confirmed certificate. This confirmation procedure shall take place within 10 working days of the submission of the certificate;

(b) not fulfilled, it shall detain the shipment.

(a) the unique certificate number,

(b) the name of the issuing and validating authorities,

(c) the date of issue and validation,

(d) the date of expiry of validity,

(e) the country of provenance,

(f) the country of origin, where known,

(g) the HS code(s),

(h) the carat weight,

(i) the value,

(j) the verifying Community authority,

(k) the date of verification.

(a) the rough diamonds are accompanied by a corresponding Community certificate issued and validated by a Community authority;

(b) the rough diamonds are contained in tamper-resistant containers sealed in accordance with Article 12.

(a) the exporter has provided conclusive evidence that the rough diamonds for which a certificate is being requested were lawfully imported in accordance with the provisions of Article 3;

(b) the other information requested on the certificate is correct;

(c) the rough diamonds are effectively destined for arrival in the territory of a participant, and

(d) the rough diamonds are to be transported in a tamper-resistant container.

(a) it will verify the content of each container; or

(b) it will identify the containers, the content of which shall be verified, on the basis of a risk analysis or equivalent system that gives due consideration to rough diamond shipments.

(a) the unique certificate number,

(b) the name of the issuing and validating authorities,

(c) the date of issue and validation,

(d) the date of expiry of validity,

(e) the country of provenance,

(f) the country of origin, where known,

(g) the HS code(s),

(h) the carat weight and value.

(a) provide conclusive evidence that adopted rules and regulations whereby its members dealing in rough diamonds, whether natural or legal persons, undertake that they will, at the latest from the date of applicability of the Articles referred to in Article 29(3):

and

(b) provide conclusive evidence that is has adopted rules and regulations which oblige the organisation:

and

(c) provide the Commission and the appropriate Community authority with a complete list of all its members dealing in rough diamonds, including full names, addresses, location and other information which will contribute to avoiding mistaken identities.

(a) A listed organisation or a member thereof shall provide the relevant Community authority with access to any information that may be needed to assess the proper functioning of the system of warranties and industry self-regulation. Where circumstances justify, that Community authority may require additional guarantees that an organisation is able to maintain a credible system.

(b) The appropriate Community authority shall report its assessment to the Commission on an annual basis.

(a) If the Commission has credible information that a listed organisation or a member thereof is infringing the provisions of this Article, it shall request an assessment of the situation by the Community authority of a Member State in which the organisation or its member is resident or established. Upon such request, the relevant Community authority shall promptly inquire into the matter and duly inform the Commission of its findings.

(b) If the Commission, on the basis of reports, assessments or other pertinent information, comes to the conclusion that a system of warranties and industry self-regulation does not function properly, and the issue has not been addressed adequately, the Commission shall take the necessary measures in accordance with the procedure referred to in Article 22(2).

(a) within the Community territory, including its airspace, or on board any aircraft or any vessel under the jurisdiction of a Member State;

(b) to any national of a Member State, and to any legal person, entity, or body which is incorporated or constituted under the law of a Member State.

— RECOGNISING that the trade in conflict diamonds is a matter of serious international concern, which can be directly linked to the fuelling of armed conflict, the activities of rebel movements aimed at undermining or overthrowing legitimate governments, and the illicit traffic in, and proliferation of, armaments, especially small arms and light weapons;

— FURTHER RECOGNISING the devastating impact of conflicts fuelled by the trade in conflict diamonds on the peace, safety and security of people in affected countries and the systematic and gross human rights violations that have been perpetrated in such conflicts;

— NOTING the negative impact of such conflicts on regional stability and the obligations placed upon states by the United Nations Charter regarding the maintenance of international peace and security;

— BEARING IN MIND that urgent international action is imperative to prevent the problem of conflict diamonds from negatively affecting the trade in legitimate diamonds, which makes a critical contribution to the economies of many of the producing, processing, exporting and importing states, especially developing states;

— RECALLING all of the relevant resolutions of the United Nations Security Council under Chapter VII of the United Nations Charter, including the relevant provisions of Resolutions 1173 (1998), 1295 (2000), 1306 (2000), and 1343 (2001), and determined to contribute to and support the implementation of the measures provided for in these resolutions;

— HIGHLIGHTING the United Nations General Assembly Resolution 55/56 (2000) on the role of the trade in conflict diamonds in fuelling armed conflict, which called on the international community to give urgent and careful consideration to devising effective and pragmatic measures to address this problem;

— FURTHER HIGHLIGHTING the recommendation in United Nations General Assembly Resolution 55/56 that the international community develop detailed proposals for a simple and workable international certification scheme for rough diamonds based primarily on national certification schemes and on internationally agreed minimum standards;

— RECALLING that the Kimberley Process, which was established to find a solution to the international problem of conflict diamonds, was inclusive of concerned stake holders, namely producing, exporting and importing states, the diamond industry and civil society;

— CONVINCED that the opportunity for conflict diamonds to play a role in fuelling armed conflict can be seriously reduced by introducing a certification scheme for rough diamonds designed to exclude conflict diamonds from the legitimate trade;

— RECALLING that the Kimberley Process considered that an international certification scheme for rough diamonds, based on national laws and practices and meeting internationally agreed minimum standards, will be the most effective system by which the problem of conflict diamonds could be addressed;

— ACKNOWLEDGING the important initiatives already taken to address this problem, in particular by the governments of Angola, the Democratic Republic of Congo, Guinea and Sierra Leone and by other key producing, exporting and importing countries, as well as by the diamond industry, in particular by the World Diamond Council, and by civil society;

— WELCOMING voluntary self-regulation initiatives announced by the diamond industry and recognising that a system of such voluntary self-regulation contributes to ensuring an effective internal control system of rough diamonds based upon the international certification scheme for rough diamonds;

— RECOGNISING that an international certification scheme for rough diamonds will only be credible if all Participants have established internal systems of control designed to eliminate the presence of conflict diamonds in the chain of producing, exporting and importing rough diamonds within their own territories, while taking into account that differences in production methods and trading practices as well as differences in institutional controls thereof may require different approaches to meet minimum standards;

— FURTHER RECOGNISING that the international certification scheme for rough diamonds must be consistent with international law governing international trade;

— ACKNOWLEDGING that state sovereignty should be fully respected and the principles of equality, mutual benefits and consensus should be adhered to,

CONFLICT DIAMONDS means rough diamonds used by rebel movements or their allies to finance conflict aimed at undermining legitimate governments, as described in relevant United Nations Security Council (UNSC) resolutions insofar as they remain in effect, or in other similar UNSC resolutions which may be adopted in the future, and as understood and recognised in United Nations General Assembly (UNGA) Resolution 55/56, or in other similar UNGA resolutions which may be adopted in future;

COUNTRY OF ORIGIN means the country where a shipment of rough diamonds has been mined or extracted;

COUNTRY OF PROVENANCE means the last Participant from where a shipment of rough diamonds was exported, as recorded on import documentation;

DIAMOND means a natural mineral consisting essentially of pure crystallised carbon in the isometric system, with a hardness on the Mohs (scratch) scale of 10, a specific gravity of approximately 3.52 and a refractive index of 2.42;

EXPORT means the physical leaving/taking out of any part of the geographical territory of a Participant;

EXPORTING AUTHORITY means the authority(ies) or body(ies) designated by a Participant from whose territory a shipment of rough diamonds is leaving, and which are authorised to validate the Kimberley Process Certificate;

FREE TRADE ZONE means a part of the territory of a Participant where any goods introduced are generally regarded, insofar as import duties and taxes are concerned, as being outside the customs territory;

IMPORT means the physical entering/bringing into any part of the geographical territory of a Participant;

IMPORTING AUTHORITY means the authority(ies) or body(ies) designated by a Participant into whose territory a shipment of rough diamonds is imported to conduct all import formalities and particularly the verification of accompanying Kimberley Process Certificates;

KIMBERLEY PROCESS CERTIFICATE means a forgery resistant document with a particular format which identifies a shipment of rough diamonds as being in compliance with the requirements of the Certification Scheme;

OBSERVER means a representative of civil society, the diamond industry, international organisations and non-participating governments invited to take part in Plenary meetings;

PARCEL means one or more diamonds that are packed together and that are not individualised;

PARCEL OF MIXED ORIGIN means a parcel that contains rough diamonds from two or more countries of origin, mixed together;

PARTICIPANT means a state or a regional economic integration organisation for which the Certification Scheme is effective;

REGIONAL ECONOMIC INTEGRATION ORGANISATION means an organisation comprised of sovereign states that have transferred competence to that organisation in respect of matters governed by the Certification Scheme;

ROUGH DIAMONDS means diamonds that are unworked or simply sawn, cleaved or bruted and fall under the Relevant Harmonised Commodity Description and Coding System 71021000, 71022100 and 71023100;

SHIPMENT means one or more parcels that are physically imported or exported;

TRANSIT means the physical passage across the territory of a Participant or a non-Participant, with or without transhipment, warehousing or change in mode of transport, when such passage is only a portion of a complete journey beginning and terminating beyond the frontier of the Participant or non-Participant across whose territory a shipment passes;

(a) a Kimberley Process Certificate (hereafter referred to as the Certificate) accompanies each shipment of rough diamonds on export;

(b) its processes for issuing Certificates meet the minimum standards of the Kimberley Process as set out in Section IV;

(c) Certificates meet the minimum requirements set out in Annex I. As long as these requirements are met, Participants may at their discretion establish additional characteristics for their own Certificates, for example their form, additional data or security elements;

(d) it notifies all other Participants through the Chair of the features of its Certificate as specified in Annex I, for purposes of validation.

(a) with regard to shipments of rough diamonds exported to a Participant, require that each such shipment is accompanied by a duly validated Certificate;

(b) with regard to shipments of rough diamonds imported from a Participant:

(c) ensure that no shipment of rough diamonds is imported from or exported to a non-Participant;

(d) recognise that Participants through whose territory shipments transit are not required to meet the requirement of paragraphs (a) and (b) above, and of Section II (a) provided that the designated authorities of the Participant through whose territory a shipment passes, ensure that the shipment leaves its territory in an identical state as it entered its territory (i.e. unopened and not tampered with).

(a) establish a system of internal controls designed to eliminate the presence of conflict diamonds from shipments of rough diamonds imported into and exported from its territory;

(b) designate an Importing and an Exporting Authority(ies);

(c) ensure that rough diamonds are imported and exported in tamper resistant containers;

(d) as required, amend or enact appropriate laws or regulations to implement and enforce the Certification Scheme and to maintain dissuasive and proportional penalties for transgressions;

(e) collect and maintain relevant official production, import and export data, and collate and exchange such data in accordance with the provisions of Section V.

(f) when establishing a system of internal controls, take into account, where appropriate, the further options and recommendations for internal controls as elaborated in Annex II.

(a) provide to each other through the Chair information identifying their designated authorities or bodies responsible for implementing the provisions of this Certification Scheme. Each Participant should provide to other Participants through the Chair information, preferably in electronic format, on its relevant laws, regulations, rules, procedures and practices, and update that information as required. This should include a synopsis in English of the essential content of this information;

(b) compile and make available to all other Participants through the Chair statistical data in line with the principles set out in Annex III;

(c) exchange on a regular basis experiences and other relevant information, including on self-assessment, in order to arrive at the best practice in given circumstances;

(d) consider favourably requests from other Participants for assistance to improve the functioning of the Certification Scheme within their territories;

(e) inform another Participant through the Chair if it considers that the laws, regulations, rules, procedures or practices of that other Participant do not ensure the absence of conflict diamonds in the exports of that other Participant;

(f) cooperate with other Participants to attempt to resolve problems which may arise from unintentional circumstances and which could lead to non-fulfilment of the minimum requirements for the issuance or acceptance of the Certificates, and inform all other Participants of the essence of the problems encountered and of solutions found;

(g) encourage, through their relevant authorities, closer cooperation between law enforcement agencies and between customs agencies of Participants.

1. Participants and Observers are to meet in Plenary annually, and on other occasions as Participants may deem necessary, in order to discuss the effectiveness of the Certification Scheme.

2. Participants should adopt Rules of Procedure for such meetings at the first Plenary meeting.

3. Meetings are to be held in the country where the Chair is located, unless a Participant or an international organisation offers to host a meeting and this offer has been accepted. The host country should facilitate entry formalities for those attending such meetings.

4. At the end of each Plenary meeting, a Chair would be elected to preside over all Plenary meetings, ad hoc working groups and other subsidiary bodies, which might be formed until the conclusion of the next annual Plenary meeting.

5. Participants are to reach decisions by consensus. In the event that consensus proves to be impossible, the Chair is to conduct consultations.

6. For the effective administration of the Certification Scheme, administrative support will be necessary. The modalities and functions of that support should be discussed at the first Plenary meeting, following endorsement by the UN General Assembly.

7. Administrative support could include the following functions:

8. Participation in the Certification Scheme is open on a global, non-discriminatory basis to all Applicants willing and able to fulfill the requirements of that Scheme.

9. Any applicant wishing to participate in the Certification Scheme should signify its interest by notifying the Chair through diplomatic channels. This notification should include the information set forth in paragraph (a) of Section V and be circulated to all Participants within one month.

10. Participants intend to invite representatives of civil society, the diamond industry, non-participating governments and international organisations to participate in Plenary meetings as Observers.

11. Participants are to prepare, and make available to other Participants, in advance of annual Plenary meetings of the Kimberley Process, information as stipulated in paragraph (a) of Section V outlining how the requirements of the Certification Scheme are being implemented within their respective jurisdictions.

12. The agenda of annual Plenary meetings is to include an item where information as stipulated in paragraph (a) of Section V is reviewed and Participants can provide further details of their respective systems at the request of the Plenary.

13. Where further clarification is needed, Participants at Plenary meetings, upon recommendation by the Chair, can identify and decide on additional verification measures to be undertaken. Such measures are to be implemented in accordance with applicable national and international law. These could include, but need not be limited to measures such as:

14. Review missions are to be conducted in an analytical, expert and impartial manner with the consent of the Participant concerned. The size, composition, terms of reference and time-frame of these missions should be based on the circumstances and be established by the Chair with the consent of the Participant concerned and in consultation with all Participants.

15. A report on the results of compliance verification measures is to be forwarded to the Chair and to the Participant concerned within three weeks of completion of the mission. Any comments from that Participant as well as the report, are to be posted on the restricted access section of an official Certification Scheme website no later than three weeks after the submission of the report to the Participant concerned. Participants and Observers should make every effort to observe strict confidentiality regarding the issue and the discussions relating to any compliance matter.

16. In the event that an issue regarding compliance by a Participant or any other issue regarding the implementation of the Certification Scheme arises, any concerned Participant may so inform the Chair, who is to inform all Participants without delay about the said concern and enter into dialogue on how to address it. Participants and Observers should make every effort to observe strict confidentiality regarding the issue and the discussions relating to any compliance matter.

17. This document may be modified by consensus of the Participants.

18. Modifications may be proposed by any Participant. Such proposals should be sent in writing to the Chair, at least ninety days before the next Plenary meeting, unless otherwise agreed.

19. The Chair is to circulate any proposed modification expeditiously to all Participants and Observers and place it on the agenda of the next annual Plenary meeting.

20. Participants intend that the Certification Scheme should be subject to periodic review, to allow Participants to conduct a thorough analysis of all elements contained in the scheme. The review should also include consideration of the continuing requirement for such a scheme, in view of the perception of the Participants, and of international organisations, in particular the United Nations, of the continued threat posed at that time by conflict diamonds. The first such review should take place no later than three years after the effective starting date of the Certification Scheme. The review meeting should normally coincide with the annual Plenary meeting, unless otherwise agreed.

21. The Certification Scheme should be established at the Ministerial Meeting on the Kimberley Process Certification Scheme for Rough Diamonds in Interlaken on 5 November 2002.

— Each Certificate should bear the title ‘Kimberley Process Certificate’ and the following statement: ‘The rough diamonds in this shipment have been handled in accordance with the provisions of the Kimberley Process Certification Scheme for rough diamonds’

— Country of origin for shipment of parcels of unmixed (i.e. from the same) origin

— Certificates may be issued in any language, provided that an English translation is incorporated

— Unique numbering with the Alpha 2 country code, according to ISO 3166-1

— Tamper and forgery resistant

— Date of issuance

— Date of expiry

— Issuing authority

— Identification of exporter and importer

— Carat weight/mass

— Value in US$

— Number of parcels in shipment

— Relevant Harmonised Commodity Description and Coding System

— Validation of Certificate by the Exporting Authority

— Characteristics of a Certificate (for example as to form, additional data or security elements)

— Quality characteristics of the rough diamonds in the shipment

— A recommended import confirmation part should have the following elements:

1. Participants may appoint an official coordinator(s) to deal with the implementation of the Certification Scheme.

2. Participants may consider the utility of complementing and/or enhancing the collection and publication of the statistics identified in Annex III based on the contents of Kimberley Process Certificates.

3. Participants are encouraged to maintain the information and data required by Section V on a computerised database.

4. Participants are encouraged to transmit and receive electronic messages in order to support the Certification Scheme.

5. Participants that produce diamonds and that have rebel groups suspected of mining diamonds within their territories are encouraged to identify the areas of rebel diamond mining activity and provide this information to all other Participants. This information should be updated on a regular basis.

6. Participants are encouraged to make known the names of individuals or companies convicted of activities relevant to the purposes of the Certification Scheme to all other Participants through the Chair.

7. Participants are encouraged to ensure that all cash purchases of rough diamonds are routed through official banking channels, supported by verifiable documentation.

8. Participants that produce diamonds should analyse their diamond production under the following headings:

9. Participants are encouraged to ensure that all diamond mines are licensed and to allow only those mines so licensed to mine diamonds.

10. Participants are encouraged to ensure that prospecting and mining companies maintain effective security standards to ensure that conflict diamonds do not contaminate legitimate production.

11. All artisanal and informal diamond miners should be licensed and only those persons so licensed should be allowed to mine diamonds.

12. Licensing records should contain the following minimum information: name, address, nationality and/or residence status and the area of authorised diamond mining activity.

13. All diamond buyers, sellers, exporters, agents and courier companies involved in carrying rough diamonds should be registered and licensed by each Participant's relevant authorities.

14. Licensing records should contain the following minimum information: name, address and nationality and/or residence status.

15. All rough diamond buyers, sellers and exporters should be required by law to keep for a period of five years daily buying, selling or exporting records listing the names of buying or selling clients, their license number and the amount and value of diamonds sold, exported or purchased.

16. The information in paragraph 14 above should be entered into a computerised database, to facilitate the presentation of detailed information relating to the activities of individual rough diamond buyers and sellers.

17. A exporter should submit a rough diamond shipment to the relevant Exporting Authority.

18. The Exporting Authority is encouraged, prior to validating a Certificate, to require an exporter to provide a declaration that the rough diamonds being exported are not conflict diamonds.

19. Rough diamonds should be sealed in a tamper proof container together with the Certificate or a duly authenticated copy. The Exporting Authority should then transmit a detailed e-mail message to the relevant Importing Authority containing information on the carat weight, value, country of origin or provenance, importer and the serial number of the Certificate.

20. The Exporting Authority should record all details of rough diamond shipments on a computerised database.

21. The Importing Authority should receive an e-mail message either before or upon arrival of a rough diamond shipment. The message should contain details such as the carat weight, value, country of origin or provenance, exporter and the serial number of the Certificate.

22. The Importing Authority should inspect the shipment of rough diamonds to verify that the seals and the container have not been tampered with and that the export was performed in accordance with the Certification Scheme.

23. The Importing Authority should open and inspect the contents of the shipment to verify the details declared on the Certificate.

24. Where applicable and when requested, the Importing Authority should send the return slip or import confirmation coupon to the relevant Exporting Authority.

25. The Importing Authority should record all details of rough diamond shipments on a computerised database.

26. Shipments of rough diamonds to and from free trade zones should be processed by the designated authorities.

(a) to keep and publish within two months of the reference period and in a standardised format, quarterly aggregate statistics on rough diamond exports and imports, as well as the numbers of certificates validated for export, and of imported shipments accompanied by Certificates;

(b) to keep and publish statistics on exports and imports, by origin and provenance wherever possible; by carat weight and value; and under the relevant Harmonised Commodity Description and Coding System (HS) classifications 7102 10; 7102 21; 7102 31;

(c) to keep and publish on a semi-annual basis and within two months of the reference period statistics on rough diamond production by carat weight and by value. In the event that a Participant is unable to publish these statistics it should notify the Chair immediately;

(d) to collect and publish these statistics by relying in the first instance on existing national processes and methodologies;

(e) to make these statistics available to an intergovernmental body or to another appropriate mechanism identified by the Participants for (1) compilation and publication on a quarterly basis in respect of exports and imports, and (2) on a semi-annual basis in respect of production. These statistics are to be made available for analysis by interested parties and by the Participants, individually or collectively, according to such terms of reference as may be established by the Participants;

(f) to consider statistical information pertaining to the international trade in and production of rough diamonds at annual Plenary meetings, with a view to addressing related issues, and to supporting effective implementation of the Certification Scheme.

— 

Community Protection Section

Australian Customs Section

Customs House, 5 Constitution Avenue

Canberra ACT 2601

Australia

— 

Minerals Development Section

Department of Industry, Tourism and Resources

GPO Box 9839

Canberra ACT 2601

Austrália

— International:

— 

Department of Foreign Affairs and International Trade

Peace Building and Human Security Division

Lester B Pearson Tower B — Room: B4-120

125 Sussex Drive Ottawa, Ontario K1A 0G2

Canada

— For specimen of the Canadian KP Certificate:

— 

Stewardship Division

International and Domestic Market Policy Division

Mineral and Metal Policy Branch

Minerals and Metals Sector

Natural Resources Canada

580 Booth Street, 10th Floor, Room: 10A6

Ottawa, Ontario

Canada K1A 0E4

— General Enquiries:

— 

Kimberley Process Office

Minerals and Metals Sector (MMS)

Natural Resources Canada (NRCan)

10th Floor, Area A-7

580 Booth Street

Ottawa, Ontario

Canada K1A 0E4

— 

United Nations Policy Division

Foreign Policy Bureau

Ministry of Foreign Affairs

2-11-1, Shibakoen Minato-ku

105-8519 Tokyo

Japan

— 

Mineral and Natural Resources Division

Agency for Natural Resources and Energy

Ministry of Economy, Trade and Industry

1-3-1 Kasumigaseki, Chiyoda-ku

100-8901 Tokyo

Japan

— 

UN Division

Ministry of Foreign Affairs and Trade

Government Complex Building

77 Sejong-ro, Jongro-gu

Seoul

Korea

— 

Trade Policy Division

Ministry of Commerce, Industry and Enterprise

1 Joongang-dong, Kwacheon-City

Kyunggi-do

Korea

— 

Ministry of Finance

State Gemological Center

Degtyarivska St. 38-44

Kiev

04119 Ukraine

— 

International Department

Diamond Factory ‘Kristall’

600 Letiya Street 21

21100 Vinnitsa

Ukraine

1. 

the Government Diamond Office (GDO) within the United Nations Department of the Foreign and Commonwealth Office,

King Charles Street,

London SW1A 2AH

United Kingdom

Tel. (44-20) 70 08 6902

Fax (44-20) 70 08 3905

e-mail: clive.wright@fco.gov.uk

2. 

Federale Overheidsdienst Economie, KMO, Middenstand en Energie, Dienst Vergunningen/Service Public Fédéral Economie, PME, Classes moyennes et Energie, Service Licence,

Italiëlei 124, bus 71

B-2000 Antwerpen

tel. (32-3) 206 94 70

fax (32-3) 206 94 90

e-mail: Diamond@mineco.fgov.be

In Belgium the controls of imports and exports of rough diamonds required by Regulation (EC) No 2368/2002 and the customs treatment will only be done at:

The Diamond Office,

Hovenierstraat 22

B-2018 Antwerpen

— Dimensions: A4 (210 mm x 297 mm);

— Watermarked with invisible (yellow/red) UV fibres;

— Solvent sensitive;

— UV dull (features in the document stand out clearly when highlighted under a Ultra-violet lamp);

— 95 g/m² paper.

— Rainbow background tint (solvent sensitive);

— 1 Colour background tint (permanent and light fast);

— UV invisible working (stars of the EU Flag);

— EU Flag: Printed gold and European blue;

— Intaglio Border;

— Extra Small Print line reading ‘Kimberley Process Certificate’;

— Latent image: KP;

—  ►M2  Micro-text reading ‘KPCS’; ◄

— The document design must incorporate anticopy (‘Medallion’) features into the background fine-line printing.

— Each EC Certificate shall have a unique serial number, preceded by the code: EC.

— The Commission shall attribute the serial numbers to the Member States that intend to issue EC Certificates.

— There should be two types of matching numbering — visible and invisible:

— First =  ►M2  8 digit ◄ sequential, once on all parts of the document, printed black (fluorescing to green under UV light)

— Second =  ►M2  8 digit ◄ sequential invisible printed numbering (matching above) to fluorescent red under UV light (aligned vertically with top visible numbers).

(a) left side:

(b) right side:

Antwerpsche Diamantkring CV

Hoveniersstraat 2 bus 515

B-2018 Antwerpen

Beurs voor Diamanthandel CV

Pelikaanstraat 78

B-2018 Antwerpen

Diamantclub van Antwerpen CV

Pelikaanstraat 62

B-2018 Antwerpen

Vrije Diamanthandel NV

Pelikaanstraat 62

B-2018 Antwerpen

The London Diamond Bourse and Club

100 Hatton Garden

London EC1N 8NX

United Kingdom