EUR-Lex Access to European Union law
This document is an excerpt from the EUR-Lex website
Document C:2008:221:FULL
Official Journal of the European Union, C 221, 29 August 2008
Official Journal of the European Union, C 221, 29 August 2008
Official Journal of the European Union, C 221, 29 August 2008
ISSN 1725-2423 |
||
Official Journal of the European Union |
C 221 |
|
English edition |
Information and Notices |
Volume 51 |
Notice No |
Contents |
page |
|
IV Notices |
|
|
NOTICES FROM MEMBER STATES |
|
2008/C 221/01 |
Commission communication in the framework of the implementation of Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits ( 1 ) |
|
|
|
|
(1) Text with EEA relevance |
EN |
|
IV Notices
NOTICES FROM MEMBER STATES
29.8.2008 |
EN |
Official Journal of the European Union |
C 221/1 |
Commission communication in the framework of the implementation of Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits
(Text with EEA relevance)
(Publication of titles and references of harmonised standards under the Directive)
(2008/C 221/01)
European Standardisation Organisation (1) |
Reference and title of the standard (and reference document) |
Reference of the superseded standard |
Date of cessation of presumption of conformity of the superseded standard Note 1 |
Cenelec |
EN 41003:1998 |
|
|
Particular safety requirements for equipment to be connected to telecommunication networks |
EN 41003:1996 Note 2.1 |
Date expired (1.1.2002) |
|
Cenelec |
EN 50063:1989 |
|
|
Safety requirements for the construction and the installation of equipment for resistance welding and allied processes |
None |
— |
|
Cenelec |
EN 50065-4-2:2001 |
|
|
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz and 1,6 MHz to 30 MHz — Part 4-2: Low voltage decoupling filters — Safety requirements |
None |
— |
|
Amendment A1:2003 to EN 50065-4-2:2001 |
Note 3 |
Date expired (1.12.2005) |
|
Amendment A2:2005 to EN 50065-4-2:2001 |
Note 3 |
Date expired (1.3.2008) |
|
Cenelec |
EN 50065-4-7:2005 |
|
|
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz and 1,6 MHz to 30 MHz — Part 4-7: Portable low voltage decoupling filters — Safety requirements |
None |
— |
|
Cenelec |
EN 50085-1:1997 |
|
|
Cable trunking systems and cable ducting systems for electrical installations — Part 1: General requirements |
None |
— |
|
Cenelec |
EN 50085-1:2005 |
|
|
Cable trunking systems and cable ducting systems for electrical installations — Part 1: General requirements |
EN 50085-1:1997 Note 2.1 |
— |
|
Cenelec |
EN 50085-2-1:2006 |
|
|
Cable trunking systems and cable ducting systems for electrical installations — Part 2-1: Cable trunking systems and cable ducting systems intended for mounting on walls and ceilings |
None |
— |
|
Cenelec |
EN 50085-2-3:1999 |
|
|
Cable trunking systems and cable ducting systems for electrical installations — Part 2-3: Particular requirements for slotted cable trunking systems intended for installation in cabinets |
None |
— |
|
Cenelec |
EN 50086-1:1993 |
|
|
Conduit systems for cable management — Part 1: General requirements |
None |
— |
|
Cenelec |
EN 50086-2-1:1995 |
|
|
Conduit systems for cable management — Part 2-1: Particular requirements for rigid conduit systems |
None |
— |
|
Amendment A11:1998 to EN 50086-2-1:1995 |
Note 3 |
— |
|
Cenelec |
EN 50086-2-2:1995 |
|
|
Conduit systems for cable management — Part 2-2: Particular requirements for pliable conduit systems |
None |
— |
|
Amendment A11:1998 to EN 50086-2-2:1995 |
Note 3 |
— |
|
Cenelec |
EN 50086-2-3:1995 |
|
|
Conduit systems for cable management — Part 2-3: Particular requirements for flexible conduit systems |
None |
— |
|
Amendment A11:1998 to EN 50086-2-3:1995 |
Note 3 |
— |
|
Cenelec |
EN 50086-2-4:1994 |
|
|
Conduit systems for cable management — Part 2-4: Particular requirements for conduit systems buried underground |
None |
— |
|
Amendment A1:2001 to EN 50086-2-4:1994 |
Note 3 |
Date expired (1.8.2003) |
|
Cenelec |
EN 50090-2-2:1996 |
|
|
Home and Building Electronic Systems (HBES) — Part 2-2: System overview — General technical requirements |
None |
— |
|
Amendment A1:2002 to EN 50090-2-2:1996 |
Note 3 |
Date expired (1.8.2004) |
|
Amendment A2:2007 to EN 50090-2-2:1996 |
Note 3 |
1.11.2011 |
|
Cenelec |
EN 50106:1997 |
|
|
Safety of household and similar electrical appliances — Particular rules for routine tests referring to appliances under the scope of EN 60335-1 and EN 60967 |
HD 289 S1:1990 + A1:1992 Note 2.1 |
Date expired (1.4.2004) |
|
Amendment A1:1998 to EN 50106:1997 |
Note 3 |
Date expired (1.7.1999) |
|
Amendment A2:2001 to EN 50106:1997 |
Note 3 |
Date expired (1.8.2003) |
|
Cenelec |
EN 50146:2000 |
|
|
Cable ties for electrical installations |
None |
— |
|
Cenelec |
EN 50156-1:2004 |
|
|
Electrical equipment for furnaces and ancillary equipment — Part 1: Requirements for application design and installation |
None |
— |
|
Cenelec |
EN 50165:1997 |
|
|
Electrical equipment of non-electric appliances for household and similar purposes — Safety requirements |
None |
— |
|
Amendment A1:2001 to EN 50165:1997 |
Note 3 |
Date expired (1.8.2003) |
|
Cenelec |
EN 50178:1997 |
|
|
Electronic equipment for use in power installations |
None |
— |
|
Cenelec |
EN 50194:2000 |
|
|
Electrical apparatus for the detection of combustible gases in domestic premises — Part 1: Test methods and performance requirements |
None |
— |
|
Cenelec |
EN 50214:1997 |
|
|
Flexible cables for lifts |
HD 359 S2:1990 Note 2.3 |
Date expired (1.12.1998) |
|
Cenelec |
EN 50214:2006 |
|
|
Flat polyvinyl chloride sheathed flexible cables |
HD 359 S2:1990 + EN 50214:1997 Note 2.1 |
1.10.2008 |
|
Cenelec |
EN 50250:2002 |
|
|
Conversion adaptors for industrial use |
EN 50250:1998 Note 2.1 |
Date expired (1.7.2005) |
|
Cenelec |
EN 50262:1998 |
|
|
Cable glands for electrical installations |
None |
— |
|
Amendment A1:2001 to EN 50262:1998 |
Note 3 |
Date expired (1.4.2003) |
|
Amendment A2:2004 to EN 50262:1998 |
Note 3 |
Date expired (1.10.2007) |
|
Cenelec |
EN 50266-1:2001 |
|
|
Common test methods for cables under fire conditions — Test for vertical flame spread of vertically-mounted bunched wires or cables — Part 1: Apparatus |
HD 405.3 S1:1993 Note 2.1 |
Date expired (1.8.2002) |
|
Cenelec |
EN 50266-2-1:2001 |
|
|
Common test methods for cables under fire conditions — Test for vertical flame spread of vertically-mounted bunched wires or cables — Part 2-1: Procedures — Category A F/R |
HD 405.3 S1:1993 Note 2.1 |
Date expired (1.8.2002) |
|
Cenelec |
EN 50266-2-2:2001 |
|
|
Common test methods for cables under fire conditions — Test for vertical flame spread of vertically-mounted bunched wires or cables — Part 2-2: Procedures — Category A |
HD 405.3 S1:1993 Note 2.1 |
Date expired (1.8.2002) |
|
Cenelec |
EN 50266-2-3:2001 |
|
|
Common test methods for cables under fire conditions — Test for vertical flame spread of vertically-mounted bunched wires or cables — Part 2-3: Procedures — Category B |
HD 405.3 S1:1993 Note 2.1 |
Date expired (1.8.2002) |
|
Cenelec |
EN 50266-2-4:2001 |
|
|
Common test methods for cables under fire conditions — Test for vertical flame spread of vertically-mounted bunched wires or cables — Part 2-4: Procedures — Category C |
HD 405.3 S1:1993 Note 2.1 |
Date expired (1.8.2002) |
|
Cenelec |
EN 50266-2-5:2001 |
|
|
Common test methods for cables under fire conditions — Test for vertical flame spread of vertically-mounted bunched wires or cables — Part 2-5: Procedures — Small cables — Category D |
None |
— |
|
Cenelec |
EN 50267-1:1998 |
|
|
Common test methods for cables under fire conditions — Tests on gases evolved during combustion of materials from cables — Part 1: Apparatus |
HD 602 S1:1992 Note 2.1 |
Date expired (1.3.2000) |
|
Cenelec |
EN 50267-2-1:1998 |
|
|
Common test methods for cables under fire conditions — Tests on gases evolved during combustion of materials from cables — Part 2-1: Procedures — Determination of the amount of halogen acid gas |
None |
— |
|
Cenelec |
EN 50267-2-2:1998 |
|
|
Common test methods for cables under fire conditions — Tests on gases evolved during combustion of materials from cables — Part 2-2: Procedures — Determination of degree of acidity of gases for materials by measuring pH and conductivity |
None |
— |
|
Cenelec |
EN 50267-2-3:1998 |
|
|
Common test methods for cables under fire conditions — Tests on gases evolved during combustion of materials from cables — Part 2-3: Procedures — Determination of degree of acidity of gases for cables by determination of the weighted average of pH and conductivity |
HD 602 S1:1992 Note 2.1 |
Date expired (1.3.2000) |
|
Cenelec |
EN 50274:2002 |
|
|
Low-voltage switchgear and controlgear assemblies — Protection against electric shock — Protection against unintentional direct contact with hazardous live parts |
None |
— |
|
Cenelec |
EN 50300:2004 |
|
|
Low-voltage switchgear and controlgear assemblies — General requirements for low-voltage substation cable distribution boards |
None |
— |
|
Cenelec |
EN 50363-0:2005 |
|
|
Insulating, sheathing and covering materials for low-voltage energy cables — Part 0: General introduction |
None |
— |
|
Cenelec |
EN 50363-1:2005 |
|
|
Insulating, sheathing and covering materials for low voltage energy cables — Part 1: Cross-linked elastomeric insulating compounds |
None |
— |
|
Cenelec |
EN 50363-2-1:2005 |
|
|
Insulating, sheathing and covering materials for low voltage energy cables — Part 2-1: Cross-linked elastomeric sheathing compounds |
None |
— |
|
Cenelec |
EN 50363-2-2:2005 |
|
|
Insulating, sheathing and covering materials for low voltage energy cables — Part 2-2: Cross-linked elastomeric covering compounds |
None |
— |
|
Cenelec |
EN 50363-3:2005 |
|
|
Insulating, sheathing and covering materials for low voltage energy cables — Part 3: PVC insulating compounds |
None |
— |
|
Cenelec |
EN 50363-4-1:2005 |
|
|
Insulating, sheathing and covering materials for low voltage energy cables — Part 4-1: PVC sheathing compounds |
None |
— |
|
Cenelec |
EN 50363-4-2:2005 |
|
|
Insulating, sheathing and covering materials for low voltage energy cables — Part 4-2: PVC covering compounds |
None |
— |
|
Cenelec |
EN 50363-5:2005 |
|
|
Insulating, sheathing and covering materials for low voltage energy cables — Part 5: Halogen-free, cross-linked insulating compounds |
None |
— |
|
Cenelec |
EN 50363-6:2005 |
|
|
Insulating, sheathing and covering materials for low voltage energy cables — Part 6: Halogen-free, cross-linked sheathing compounds |
None |
— |
|
Cenelec |
EN 50363-7:2005 |
|
|
Insulating, sheathing and covering materials for low voltage energy cables — Part 7: Halogen-free, thermoplastic insulating compounds |
None |
— |
|
Cenelec |
EN 50363-8:2005 |
|
|
Insulating, sheathing and covering materials for low voltage energy cables — Part 8: Halogen-free, thermoplastic sheathing compounds |
None |
— |
|
Cenelec |
EN 50363-9-1:2005 |
|
|
Insulating, sheathing and covering materials for low voltage energy cables — Part 9-1: Miscellaneous insulating compounds — Cross-linked polyvinyl chloride (XLPVC) |
None |
— |
|
Cenelec |
EN 50363-10-1:2005 |
|
|
Insulating, sheathing and covering materials for low voltage energy cables — Part 10-1: Miscellaneous sheathing compounds — Cross-linked polyvinyl chloride (XLPVC) |
None |
— |
|
Cenelec |
EN 50363-10-2:2005 |
|
|
Insulating, sheathing and covering materials for low voltage energy cables — Part 10-2: Miscellaneous sheathing compounds — Thermoplastic polyurethane |
None |
— |
|
Cenelec |
EN 50364:2001 |
|
|
Limitation of human exposure to electromagnetic fields from devices operating in the frequency range 0 Hz to 10 GHz, used in Electronic Article Surveillance (EAS), Radio Frequency Identification (RFID) and similar applications |
None |
— |
|
Cenelec |
EN 50366:2003 |
|
|
Household and similar electrical appliances — Electromagnetic fields — Methods for evaluation and measurement |
None |
— |
|
Amendment A1:2006 to EN 50366:2003 |
Note 3 |
1.11.2008 |
|
Cenelec |
EN 50368:2003 |
|
|
Cable cleats for electrical installations |
None |
— |
|
Cenelec |
EN 50369:2005 |
|
|
Liquid tight sheathing systems for cable management |
None |
— |
|
Cenelec |
EN 50371:2002 |
|
|
Generic standard to demonstrate the compliance of low power electronic and electrical apparatus with the basic restrictions related to human exposure to electromagnetic fields (10 MHz-300 GHz) — General public |
None |
— |
|
Cenelec |
EN 50395:2005 |
|
|
Electrical test methods for low voltage energy cables |
HD 21.2 S3:1997 and its amendment + HD 22.2 S3:1997 and its amendment Note 2.1 |
Date expired (1.7.2008) |
|
Cenelec |
EN 50396:2005 |
|
|
Non electrical test methods for low voltage energy cables |
HD 21.2 S3:1997 and its amendment + HD 22.2 S3:1997 and its amendment Note 2.1 |
Date expired (1.7.2008) |
|
Cenelec |
EN 50410:2008 |
|
|
Household and similar electrical appliances — Safety — Particular requirements for decorative robots |
None |
— |
|
Cenelec |
EN 50425:2008 |
|
|
Switches for household and similar fixed electrical installations — Collateral standard — Fireman's switches for exterior and interior signs and luminaires |
None |
— |
|
Cenelec |
EN 50428:2005 |
|
|
Switches for household and similar fixed electrical installations — Collateral standard — Switches and related accessories for use in home and building electronic systems (HBES) |
None |
— |
|
Amendment A1:2007 to EN 50428:2005 |
Note 3 |
1.10.2010 |
|
Cenelec |
EN 50445:2008 |
|
|
Product family standard to demonstrate compliance of equipment for resistance welding, arc welding and allied processes with the basic restrictions related to human exposure to electromagnetic fields (0 Hz-300 GHz) |
None |
— |
|
Cenelec |
EN 50497:2007 |
|
|
Recommended test method for assessment of the risk of plasticizer exudation from PVC insulated and sheathed cables |
None |
— |
|
Cenelec |
EN 60034-1:2004 |
|
|
Rotating electrical machines — Part 1: Rating and performance (IEC 60034-1:2004) |
EN 60034-1:1998 + A1:1998 + A2:1999 + A11:2002 Note 2.1 |
Date expired (1.6.2007) |
|
Cenelec |
EN 60034-5:2001 |
|
|
Rotating electrical machines — Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) — Classification (IEC 60034-5:2000) |
EN 60034-5:1986 Note 2.1 |
Date expired (1.12.2003) |
|
Amendment A1:2007 to EN 60034-5:2001 (IEC 60034-5:2000/A1:2006) |
Note 3 |
1.12.2009 |
|
Cenelec |
EN 60034-6:1993 |
|
|
Rotating electrical machines — Part 6: Methods of cooling (IC Code) (IEC 60034-6:1991) |
None |
— |
|
Cenelec |
EN 60034-7:1993 |
|
|
Rotating electrical machines — Part 7: Classification of types of construction, mounting arrangements and terminal box position (IM Code) (IEC 60034-7:1992) |
None |
— |
|
Amendment A1:2001 to EN 60034-7:1993 (IEC 60034-7:1992/A1:2000) |
Note 3 |
Date expired (1.11.2003) |
|
Cenelec |
EN 60034-8:2002 |
|
|
Rotating electrical machines — Part 8: Terminal markings and direction of rotation (IEC 60034-8:2002) |
None |
— |
|
Cenelec |
EN 60034-8:2007 |
|
|
Rotating electrical machines — Part 8: Terminal markings and direction of rotation (IEC 60034-8:2007) |
EN 60034-8:2002 Note 2.1 |
1.7.2010 |
|
Cenelec |
EN 60034-9:2005 |
|
|
Rotating electrical machines — Part 9: Noise limits (IEC 60034-9:2003 (Modified)) |
EN 60034-9:1997 Note 2.1 |
Date expired (1.3.2008) |
|
Amendment A1:2007 to EN 60034-9:2005 (IEC 60034-9:2003/A1:2007) |
Note 3 |
1.4.2010 |
|
Cenelec |
EN 60034-11:2004 |
|
|
Rotating electrical machines — Part 11: Thermal protection (IEC 60034-11:2004) |
None |
— |
|
Cenelec |
EN 60034-12:2002 |
|
|
Rotating electrical machines — Part 12: Starting performance of single-speed three-phase cage induction motors (IEC 60034-12:2002) |
EN 60034-12:1995 + A2:1995 + A11:1999 Note 2.1 |
Date expired (1.5.2005) |
|
Amendment A1:2007 to EN 60034-12:2002 (IEC 60034-12:2002/A1:2007) |
Note 3 |
1.9.2010 |
|
Cenelec |
EN 60034-14:2004 |
|
|
Rotating electrical machines — Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher — Measurement, evaluation and limits of vibration severity (IEC 60034-14:2003) |
EN 60034-14:1996 Note 2.1 |
Date expired (1.12.2006) |
|
Amendment A1:2007 to EN 60034-14:2004 (IEC 60034-14:2003/A1:2007) |
Note 3 |
1.6.2010 |
|
Cenelec |
EN 60051-1:1998 |
|
|
Direct acting indicating analogue electrical measuring instruments and their accessories — Part 1: Definitions and general requirements common to all parts (IEC 60051-1:1997) |
EN 60051-1:1989 + A1:1995 + A2:1995 Note 2.1 |
Date expired (1.9.1999) |
|
Cenelec |
EN 60051-2:1989 |
|
|
Direct acting indicating analogue electrical measuring instruments and their accessories — Part 2: Special requirements for ammeters and voltmeters (IEC 60051-2:1984) |
None |
— |
|
Cenelec |
EN 60051-3:1989 |
|
|
Direct acting indicating analogue electrical measuring instruments and their accessories — Part 3: Special requirements for wattmeters and varmeters (IEC 60051-3:1984) |
None |
— |
|
Amendment A1:1995 to EN 60051-3:1989 (IEC 60051-3:1984/A1:1994) |
Note 3 |
Date expired (1.10.2000) |
|
Cenelec |
EN 60051-4:1989 |
|
|
Direct acting indicating analogue electrical measuring instruments and their accessories — Part 4: Special requirements for frequency meters (IEC 60051-4:1984) |
None |
— |
|
Cenelec |
EN 60051-5:1989 |
|
|
Direct acting indicating analogue electrical measuring instruments and their accessories — Part 5: Special requirements for phase meters, power factor meters and synchroscopes (IEC 60051-5:1985) |
None |
— |
|
Cenelec |
EN 60051-6:1989 |
|
|
Direct acting indicating analogue electrical measuring instruments and their accessories — Part 6: Special requirements for ohmmeters (impedance meters) and conductance meters (IEC 60051-6:1984) |
None |
— |
|
Cenelec |
EN 60051-7:1989 |
|
|
Direct acting indicating analogue electrical measuring instruments and their accessories — Part 7: Special requirements for multi-function instruments (IEC 60051-7:1984) |
None |
— |
|
Cenelec |
EN 60051-8:1989 |
|
|
Direct acting indicating analogue electrical measuring instruments and their accessories — Part 8: Special requirements for accessories (IEC 60051-8:1984) |
None |
— |
|
Cenelec |
EN 60051-9:1989 |
|
|
Direct acting indicating analogue electrical-measuring instruments and their accessories — Part 9: Recommended test methods (IEC 60051-9:1988) |
None |
— |
|
Amendment A1:1995 to EN 60051-9:1989 (IEC 60051-9:1988/A1:1994) |
Note 3 |
Date expired (15.2.2001) |
|
Amendment A2:1995 to EN 60051-9:1989 (IEC 60051-9:1988/A2:1995) |
Note 3 |
Date expired (15.2.2001) |
|
Cenelec |
EN 60061-1:1993 |
|
|
Lamp caps and holders together with gauges for the control of interchangeability and safety — Part 1: Lamp caps (IEC 60061-1:1969 (Modified) + IEC 60061-1L:1987 (Modified) + IEC 60061-1N:1992 (Modified)) |
None |
— |
|
Amendment A1:1995 to EN 60061-1:1993 (IEC 60061-1P:1994) |
Note 4 |
Date expired (1.12.2000) |
|
Amendment A2:1995 to EN 60061-1:1993 (IEC 60061-1Q:1994) |
Note 4 |
Date expired (1.9.2001) |
|
Amendment A3:1995 to EN 60061-1:1993 (IEC 60061-1R:1995) |
Note 4 |
Date expired (1.9.2001) |
|
Amendment A4:1996 to EN 60061-1:1993 (IEC 60061-1S:1996) |
Note 4 |
Date expired (1.12.2001) |
|
Amendment A5:1996 to EN 60061-1:1993 (IEC 60061-1T:1996) |
Note 4 |
Date expired (1.4.2002) |
|
Amendment A6:1996 to EN 60061-1:1993 (IEC 60061-1U:1996) |
Note 4 |
Date expired (1.7.2002) |
|
Amendment A7:1997 to EN 60061-1:1993 (IEC 60061-1-V:1997) |
Note 4 |
Date expired (1.2.2003) |
|
Amendment A25:2001 to EN 60061-1:1993 (IEC 60061-1:1969/A25:2001) |
Note 4 |
Date expired (1.3.2004) |
|
Amendment A26:2001 to EN 60061-1:1993 (IEC 60061-1:1969/A26:2001) |
Note 4 |
Date expired (1.3.2004) |
|
Amendment A27:2001 to EN 60061-1:1993 (IEC 60061-1:1969/A27:2001) |
Note 4 |
Date expired (1.11.2004) |
|
Amendment A21:1998 to EN 60061-1:1993 (IEC 60061-1:1969/A21:1998) |
Note 4 |
Date expired (1.4.2005) |
|
Amendment A28:2002 to EN 60061-1:1993 (IEC 60061-1:1969/A28:2002) |
Note 4 |
Date expired (1.4.2005) |
|
Amendment A29:2002 to EN 60061-1:1993 (IEC 60061-1:1969/A29:2002) |
Note 4 |
Date expired (1.6.2005) |
|
Amendment A30:2002 to EN 60061-1:1993 (IEC 60061-1:1969/A30:2002) |
Note 4 |
Date expired (1.11.2005) |
|
Amendment A22:1999 to EN 60061-1:1993 (IEC 60061-1:1969/A22:1999) |
Note 4 |
Date expired (1.4.2006) |
|
Amendment A31:2003 to EN 60061-1:1993 (IEC 60061-1:1969/A31:2003) |
Note 4 |
Date expired (1.6.2006) |
|
Amendment A23:1999 to EN 60061-1:1993 (IEC 60061-1:1969/A23:1999) |
Note 4 |
Date expired (1.8.2006) |
|
Amendment A32:2003 to EN 60061-1:1993 (IEC 60061-1:1969/A32:2003) |
Note 4 |
Date expired (1.10.2006) |
|
Amendment A33:2003 to EN 60061-1:1993 (IEC 60061-1:1969/A33:2003) |
Note 4 |
Date expired (1.12.2006) |
|
Amendment A24:2000 to EN 60061-1:1993 (IEC 60061-1:1969/A24:2000) |
Note 4 |
Date expired (1.8.2007) |
|
Amendment A34:2004 to EN 60061-1:1993 (IEC 60061-1:1969/A34:2004) |
Note 4 |
Date expired (1.9.2007) |
|
Amendment A35:2005 to EN 60061-1:1993 (IEC 60061-1:1969/A35:2004) |
Note 4 |
Date expired (1.12.2007) |
|
Amendment A36:2005 to EN 60061-1:1993 (IEC 60061-1:1969/A36:2005) |
Note 3 |
1.10.2008 |
|
Amendment A37:2006 to EN 60061-1:1993 (IEC 60061-1:1969/A37:2006) |
Note 3 |
1.9.2009 |
|
Amendment A38:2007 to EN 60061-1:1993 (IEC 60061-1:1969/A38:2006) |
Note 3 |
1.3.2010 |
|
Amendment A39:2007 to EN 60061-1:1993 (IEC 60061-1:1969/A39:2007) |
Note 3 |
1.5.2010 |
|
Cenelec |
EN 60061-2:1993 |
|
|
Lamp caps and holders together with gauges for the control of interchangeability and safety — Part 2: Lampholders (IEC 60061-2:1969 (Modified) + IEC 60061-2H:1987 (Modified) + IEC 60061-2I:1990 (Modified) + IEC 60061-2K:1992 (Modified)) |
None |
— |
|
Amendment A1:1995 to EN 60061-2:1993 (IEC 60061-2L:1994) |
Note 4 |
Date expired (1.12.2000) |
|
Amendment A2:1995 to EN 60061-2:1993 (IEC 60061-2M:1994) |
Note 4 |
Date expired (1.9.2001) |
|
Amendment A3:1995 to EN 60061-2:1993 (IEC 60061-2N:1995) |
Note 4 |
Date expired (1.9.2001) |
|
Amendment A4:1996 to EN 60061-2:1993 (IEC 60061-2P:1996) |
Note 4 |
Date expired (1.12.2001) |
|
Amendment A5:1996 to EN 60061-2:1993 (IEC 60061-2Q:1996) |
Note 4 |
Date expired (1.4.2002) |
|
Amendment A6:1996 to EN 60061-2:1993 (IEC 60061-2R:1996) |
Note 4 |
Date expired (1.7.2002) |
|
Amendment A7:1997 to EN 60061-2:1993 (IEC 60061-2S:1997) |
Note 4 |
Date expired (1.2.2003) |
|
Amendment A22:2001 to EN 60061-2:1993 (IEC 60061-2:1969/A22:2001) |
Note 4 |
Date expired (1.3.2004) |
|
Amendment A23:2001 to EN 60061-2:1993 (IEC 60061-2:1969/A23:2001) |
Note 4 |
Date expired (1.3.2004) |
|
Amendment A24:2001 to EN 60061-2:1993 (IEC 60061-2:1969/A24:2001) |
Note 4 |
Date expired (1.11.2004) |
|
Amendment A18:1998 to EN 60061-2:1993 (IEC 60061-2:1969/A18:1998) |
Note 4 |
Date expired (1.4.2005) |
|
Amendment A25:2002 to EN 60061-2:1993 (IEC 60061-2:1969/A25:2002) |
Note 4 |
Date expired (1.4.2005) |
|
Amendment A26:2002 to EN 60061-2:1993 (IEC 60061-2:1969/A26:2002) |
Note 4 |
Date expired (1.6.2005) |
|
Amendment A27:2002 to EN 60061-2:1993 (IEC 60061-2:1969/A27:2002) |
Note 4 |
Date expired (1.11.2005) |
|
Amendment A19:1999 to EN 60061-2:1993 (IEC 60061-2:1969/A19:1999) |
Note 4 |
Date expired (1.4.2006) |
|
Amendment A28:2003 to EN 60061-2:1993 (IEC 60061-2:1969/A28:2003) |
Note 4 |
Date expired (1.6.2006) |
|
Amendment A20:1999 to EN 60061-2:1993 (IEC 60061-2:1969/A20:1999) |
Note 4 |
Date expired (1.8.2006) |
|
Amendment A29:2003 to EN 60061-2:1993 (IEC 60061-2:1969/A29:2003) |
Note 4 |
Date expired (1.10.2006) |
|
Amendment A30:2003 to EN 60061-2:1993 (IEC 60061-2:1969/A30:2003) |
Note 4 |
Date expired (1.12.2006) |
|
Amendment A21:2000 to EN 60061-2:1993 (IEC 60061-2:1969/A21:2000) |
Note 4 |
Date expired (1.8.2007) |
|
Amendment A31:2004 to EN 60061-2:1993 (IEC 60061-2:1969/A31:2004) |
Note 4 |
Date expired (1.9.2007) |
|
Amendment A32:2005 to EN 60061-2:1993 (IEC 60061-2:1969/A32:2004) |
Note 4 |
Date expired (1.12.2007) |
|
Amendment A33:2005 to EN 60061-2:1993 (IEC 60061-2:1969/A33:2005) |
Note 3 |
1.10.2008 |
|
Amendment A34:2006 to EN 60061-2:1993 (IEC 60061-2:1969/A34:2006) |
Note 3 |
1.9.2009 |
|
Amendment A35:2007 to EN 60061-2:1993 (IEC 60061-2:1969/A35:2006) |
Note 3 |
1.3.2010 |
|
Amendment A36:2007 to EN 60061-2:1993 (IEC 60061-2:1969/A36:2007) |
Note 3 |
1.5.2010 |
|
Cenelec |
EN 60061-3:1993 |
|
|
Lamp caps and holders together with gauges for the control of interchangeability and safety — Part 3: Gauges (IEC 60061-3:1969 (Modified) + IEC 60061-3M:1992 (Modified)) |
None |
— |
|
Amendment A1:1995 to EN 60061-3:1993 (IEC 60061-3N:1994) |
Note 4 |
Date expired (1.12.2000) |
|
Amendment A2:1995 to EN 60061-3:1993 (IEC 60061-3P:1994) |
Note 4 |
Date expired (1.9.2001) |
|
Amendment A3:1995 to EN 60061-3:1993 (IEC 60061-3Q:1995) |
Note 4 |
Date expired (1.9.2001) |
|
Amendment A4:1996 to EN 60061-3:1993 (IEC 60061-3R:1996) |
Note 4 |
Date expired (1.12.2001) |
|
Amendment A5:1996 to EN 60061-3:1993 (IEC 60061-3S:1996) |
Note 4 |
Date expired (1.4.2002) |
|
Amendment A6:1996 to EN 60061-3:1993 (IEC 60061-3T:1996) |
Note 4 |
Date expired (1.7.2002) |
|
Amendment A7:1997 to EN 60061-3:1993 (IEC 60061-3U:1997) |
Note 4 |
Date expired (1.2.2003) |
|
Amendment A24:2001 to EN 60061-3:1993 (IEC 60061-3:1969/A24:2001) |
Note 4 |
Date expired (1.3.2004) |
|
Amendment A25:2001 to EN 60061-3:1993 (IEC 60061-3:1969/A25:2001) |
|
Date expired (1.3.2004) |
|
Amendment A26:2001 to EN 60061-3:1993 (IEC 60061-3:1969/A26:2001) |
Note 4 |
Date expired (1.11.2004) |
|
Amendment A20:1998 to EN 60061-3:1993 (IEC 60061-3:1969/A20:1998) |
Note 4 |
Date expired (1.4.2005) |
|
Amendment A27:2002 to EN 60061-3:1993 (IEC 60061-3:1969/A27:2002) |
Note 4 |
Date expired (1.4.2005) |
|
Amendment A28:2002 to EN 60061-3:1993 (IEC 60061-3:1969/A28:2002) |
Note 4 |
Date expired (1.6.2005) |
|
Amendment A29:2002 to EN 60061-3:1993 (IEC 60061-3:1969/A29:2002) |
Note 4 |
Date expired (1.11.2005) |
|
Amendment A21:1999 to EN 60061-3:1993 (IEC 60061-3:1969/A21:1999) |
Note 4 |
Date expired (1.4.2006) |
|
Amendment A30:2003 to EN 60061-3:1993 (IEC 60061-3:1969/A30:2003) |
|
Date expired (1.6.2006) |
|
Amendment A22:1999 to EN 60061-3:1993 (IEC 60061-3:1969/A22:1999) |
Note 4 |
Date expired (1.8.2006) |
|
Amendment A31:2003 to EN 60061-3:1993 (IEC 60061-3:1969/A31:2003) |
Note 4 |
Date expired (1.10.2006) |
|
Amendment A32:2003 to EN 60061-3:1993 (IEC 60061-3:1969/A32:2003) |
Note 4 |
Date expired (1.12.2006) |
|
Amendment A23:2000 to EN 60061-3:1993 (IEC 60061-3:1969/A23:2000) |
Note 4 |
Date expired (1.8.2007) |
|
Amendment A33:2004 to EN 60061-3:1993 (IEC 60061-3:1969/A33:2004) |
Note 4 |
Date expired (1.9.2007) |
|
Amendment A34:2005 to EN 60061-3:1993 (IEC 60061-3:1969/A34:2004) |
Note 4 |
Date expired (1.12.2007) |
|
Amendment A35:2005 to EN 60061-3:1993 (IEC 60061-3:1969/A35:2005) |
Note 3 |
1.11.2008 |
|
Amendment A36:2006 to EN 60061-3:1993 (IEC 60061-3:1969/A36:2006) |
Note 3 |
1.9.2009 |
|
Amendment A37:2007 to EN 60061-3:1993 (IEC 60061-3:1969/A37:2006) |
Note 3 |
1.3.2010 |
|
Amendment A38:2007 to EN 60061-3:1993 (IEC 60061-3:1969/A38:2007) |
Note 3 |
1.5.2010 |
|
Cenelec |
EN 60061-4:1992 |
|
|
Lamp caps and holders together with gauges for the control of interchangeability and safety — Part 4: Guidelines and general information (IEC 60061-4:1990 (Modified)) |
None |
— |
|
Amendment A1:1995 to EN 60061-4:1992 (IEC 60061-4A:1992 + IEC 60061-4B:1994) |
Note 4 |
Date expired (1.9.2001) |
|
Amendment A2:1995 to EN 60061-4:1992 (IEC 60061-4C:1994) |
Note 4 |
Date expired (1.9.2001) |
|
Amendment A3:1995 to EN 60061-4:1992 (IEC 60061-4D:1995) |
Note 4 |
Date expired (1.9.2001) |
|
Amendment A7:2001 to EN 60061-4:1992 (IEC 60061-4:1990/A7:2001) |
Note 4 |
Date expired (1.11.2004) |
|
Amendment A5:1998 to EN 60061-4:1992 (IEC 60061-4:1990/A5:1998) |
Note 4 |
Date expired (1.4.2005) |
|
Amendment A8:2003 to EN 60061-4:1992 (IEC 60061-4:1990/A8:2003) |
Note 4 |
Date expired (1.6.2006) |
|
Amendment A6:2000 to EN 60061-4:1992 (IEC 60061-4:1990/A6:2000) |
Note 4 |
Date expired (1.8.2007) |
|
Amendment A9:2005 to EN 60061-4:1992 (IEC 60061-4:1990/A9:2004) |
Note 4 |
Date expired (1.12.2007) |
|
Amendment A10:2006 to EN 60061-4:1992 (IEC 60061-4:1990/A10:2006) |
Note 3 |
1.9.2009 |
|
Amendment A11:2007 to EN 60061-4:1992 (IEC 60061-4:1990/A11:2007) |
Note 3 |
1.11.2010 |
|
Cenelec |
EN 60065:2002 |
|
|
Audio, video and similar electronic apparatus — Safety requirements (IEC 60065:2001 (Modified)) |
EN 60065:1998 Note 2.1 |
Date expired (1.3.2007) |
|
Amendment A1:2006 to EN 60065:2002 (IEC 60065:2001/A1:2005 (Modified)) |
EN 60491:1995 Note 3 |
1.12.2008 |
|
Cenelec |
EN 60110-1:1998 |
|
|
Power capacitors for induction heating installations — Part 1: General (IEC 60110-1:1998) |
HD 207 S1:1977 Note 2.1 |
Date expired (1.5.2001) |
|
Cenelec |
EN 60127-1:1991 |
|
|
Miniature fuses — Part 1: Definitions for miniature fuses and general requirements for miniature fuse-links (IEC 60127-1:1988) |
None |
— |
|
Amendment A1:1999 to EN 60127-1:1991 (IEC 60127-1:1988/A1:1999) |
Note 3 |
Date expired (1.5.2002) |
|
Amendment A2:2003 to EN 60127-1:1991 (IEC 60127-1:1988/A2:2002) |
Note 3 |
Date expired (1.2.2006) |
|
Cenelec |
EN 60127-1:2006 |
|
|
Miniature fuses — Part 1: Definitions for miniature fuses and general requirements for miniature fuse-links (IEC 60127-1:2006) |
EN 60127-1:1991 and its amendments Note 2.1 |
1.7.2009 |
|
Cenelec |
EN 60127-2:2003 |
|
|
Miniature fuses — Part 2: Cartridge fuse-links (IEC 60127-2:2003) |
EN 60127-2:1991 + A1:1995 + A2:2000 Note 2.1 |
Date expired (1.3.2006) |
|
Amendment A1:2003 to EN 60127-2:2003 (IEC 60127-2:2003/A1:2003) |
Note 3 |
Date expired (1.10.2006) |
|
Cenelec |
EN 60127-3:1996 |
|
|
Miniature fuses — Part 3: Sub-miniature fuse-links (IEC 60127-3:1988 + A1:1991) |
EN 60127-3:1991 Note 2.1 |
Date expired (1.12.2001) |
|
Amendment A2:2003 to EN 60127-3:1996 (IEC 60127-3:1988/A2:2002) |
Note 3 |
Date expired (1.2.2006) |
|
Cenelec |
EN 60127-4:2005 |
|
|
Miniature fuses — Part 4: Universal modular fuse-links (UMF) — Through-hole and surface mount types (IEC 60127-4:2005) |
EN 60127-4:1996 + A1:2002 + A2:2003 Note 2.1 |
Date expired (1.3.2008) |
|
Cenelec |
EN 60127-6:1994 |
|
|
Miniature fuses — Part 6: Fuse-holders for miniature fuse-links (IEC 60127-6:1994) |
None |
— |
|
Amendment A1:1996 to EN 60127-6:1994 (IEC 60127-6:1994/A1:1996) |
Note 3 |
Date expired (1.12.2001) |
|
Amendment A2:2003 to EN 60127-6:1994 (IEC 60127-6:1994/A2:2002) |
Note 3 |
Date expired (1.2.2006) |
|
Cenelec |
EN 60143-2:1994 |
|
|
Series capacitors for power systems — Part 2: Protective equipment for series capacitor banks (IEC 60143-2:1994) |
None |
— |
|
Cenelec |
EN 60155:1995 |
|
|
Glow-starters for fluorescent lamps (IEC 60155:1993) |
None |
— |
|
Amendment A1:1995 to EN 60155:1995 (IEC 60155:1993/A1:1995) |
Note 3 |
Date expired (1.9.2001) |
|
Amendment A2:2007 to EN 60155:1995 (IEC 60155:1993/A2:2006) |
Note 3 |
1.12.2009 |
|
Cenelec |
EN 60204-1:1997 |
|
|
Safety of machinery — Electrical equipment of machines — Part 1: General requirements (IEC 60204-1:1997) |
EN 60204-1:1992 Note 2.1 |
Date expired (1.7.2001) |
|
Cenelec |
EN 60204-1:2006 |
|
|
Safety of machinery — Electrical equipment of machines — Part 1: General requirements (IEC 60204-1:2005 (Modified)) |
EN 60204-1:1997 Note 2.1 |
1.6.2009 |
|
Cenelec |
EN 60215:1989 |
|
|
Safety requirements for radio transmitting equipment (IEC 60215:1987) |
None |
— |
|
Amendment A1:1992 to EN 60215:1989 (IEC 60215:1987/A1:1990) |
Note 3 |
Date expired (1.6.1993) |
|
Amendment A2:1994 to EN 60215:1989 (IEC 60215:1987/A2:1993) |
Note 3 |
Date expired (15.7.1995) |
|
Cenelec |
EN 60228:2005 |
|
|
Conductors of insulated cables (IEC 60228:2004) |
None |
— |
|
Cenelec |
EN 60238:2004 |
|
|
Edison screw lampholders (IEC 60238:2004) |
EN 60238:1998 + A1:1999 + A2:2002 Note 2.1 |
Date expired (1.10.2007) |
|
Cenelec |
EN 60252-1:2001 |
|
|
AC motor capacitors — Part 1: General — Performance, testing and rating — Safety requirements — Guide for installation and operation (IEC 60252-1:2001) |
EN 60252:1994 Note 2.1 |
Date expired (1.10.2004) |
|
Cenelec |
EN 60252-2:2003 |
|
|
AC motor capacitors — Part 2: Motor start capacitors (IEC 60252-2:2003) |
None |
— |
|
Cenelec |
EN 60255-5:2001 |
|
|
Electrical relays — Part 5: Insulation coordination for measuring relays and protection equipment — Requirements and tests (IEC 60255-5:2000) |
None |
— |
|
Cenelec |
EN 60255-27:2005 |
|
|
Measuring relays and protection equipment — Part 27: Product safety requirements (IEC 60255-27:2005) |
None |
— |
|
Cenelec |
EN 60269-1:1998 |
|
|
Low-voltage fuses — Part 1: General requirements (IEC 60269-1:1998) |
EN 60269-1:1989 + A1:1994 + A2:1998 Note 2.1 |
Date expired (1.7.2001) |
|
Amendment A1:2005 to EN 60269-1:1998 (IEC 60269-1:1998/A1:2005) |
Note 3 |
Date expired (1.3.2008) |
|
Cenelec |
EN 60269-1:2007 |
|
|
Low-voltage fuses — Part 1: General requirements (IEC 60269-1:2006) |
EN 60269-1:1998 and its amendment + EN 60269-2:1995 and its amendments + EN 60269-3:1995 and its amendment Note 2.1 |
1.3.2010 |
|
Cenelec |
EN 60269-2:1995 |
|
|
Low-voltage fuses — Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) (IEC 60269-2:1986) |
None |
— |
|
Amendment A1:1998 to EN 60269-2:1995 (IEC 60269-2:1986/A1:1995) |
EN 60269-2:1995/A1:1997 Note 3 |
Date expired (1.8.1999) |
|
Amendment A2:2002 to EN 60269-2:1995 (IEC 60269-2:1986/A2:2001) |
Note 3 |
Date expired (1.2.2005) |
|
Cenelec |
EN 60269-3:1995 |
|
|
Low-voltage fuses — Part 3: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household and similar applications) (IEC 60269-3:1987) |
None |
— |
|
Amendment A1:2003 to EN 60269-3:1995 (IEC 60269-3:1987/A1:2003) |
Note 3 |
Date expired (1.10.2006) |
|
Cenelec |
EN 60269-4:1996 |
|
|
Low-voltage fuses — Part 4: Supplementary requirements for fuse-links for the protection of semiconductor devices (IEC 60269-4:1986) |
None |
— |
|
Amendment A1:1997 to EN 60269-4:1996 (IEC 60269-4:1986/A1:1995) |
Note 3 |
Date expired (1.12.2002) |
|
Amendment A2:2003 to EN 60269-4:1996 (IEC 60269-4:1986/A2:2002) |
Note 3 |
Date expired (1.2.2006) |
|
Cenelec |
EN 60269-4:2007 |
|
|
Low-voltage fuses — Part 4: Supplementary requirements for fuse-links for the protection of semiconductor devices (IEC 60269-4:2006) |
EN 60269-4:1996 and its amendments + EN 60269-4-1:2002 Note 2.1 |
1.3.2010 |
|
Cenelec |
EN 60269-4-1:2002 |
|
|
Low-voltage fuses — Part 4-1: Supplementary requirements for fuse-links for the protection of semiconductor devices — Sections I to III: Examples of types of standardized fuse-links (IEC 60269-4-1:2002) |
None |
— |
|
Cenelec |
EN 60309-1:1999 |
|
|
Plugs, socket-outlets and couplers for industrial purposes — Part 1: General requirements (IEC 60309-1:1999) |
EN 60309-1:1997 Note 2.1 |
Date expired (1.4.2002) |
|
Amendment A11:2004 to EN 60309-1:1999 |
Note 3 |
Date expired (1.11.2004) |
|
Amendment A1:2007 to EN 60309-1:1999 (IEC 60309-1:1999/A1:2005 (Modified)) |
EN 60309-1:1999/A11:2004 Note 3 |
1.11.2009 |
|
Cenelec |
EN 60309-2:1999 |
|
|
Plugs, socket-outlets and couplers for industrial purposes — Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories (IEC 60309-2:1999) |
EN 60309-2:1998 Note 2.1 |
Date expired (1.5.2002) |
|
Amendment A11:2004 to EN 60309-2:1999 |
Note 3 |
Date expired (1.11.2004) |
|
Amendment A1:2007 to EN 60309-2:1999 (IEC 60309-2:1999/A1:2005 (Modified)) |
EN 60309-2:1999/A11:2004 Note 3 |
1.11.2009 |
|
Cenelec |
EN 60309-4:2007 |
|
|
Plugs, socket-outlets and couplers for industrial purposes — Part 4: Switched socket-outlets and connectors with or without interlock (IEC 60309-4:2006 (Modified)) |
None |
— |
|
Cenelec |
EN 60320-1:2001 |
|
|
Appliance couplers for household and similar general purposes — Part 1: General requirements (IEC 60320-1:2001) |
EN 60320-1:1996 + A1:1996 + A2:1998 Note 2.1 |
Date expired (1.7.2004) |
|
Amendment A1:2007 to EN 60320-1:2001 (IEC 60320-1:2001/A1:2007) |
Note 3 |
1.10.2010 |
|
Cenelec |
EN 60320-2-1:2000 |
|
|
Appliance couplers for household and similar general purposes — Part 2-1: Sewing machine couplers (IEC 60320-2-1:2000) |
EN 60320-2-1:1987 Note 2.1 |
Date expired (1.9.2003) |
|
Cenelec |
EN 60320-2-2:1998 |
|
|
Appliance couplers for household and similar general purposes — Part 2-2: Interconnection couplers for household and similar equipment (IEC 60320-2-2:1998) |
EN 60320-2-2:1991 Note 2.1 |
Date expired (1.7.2001) |
|
Cenelec |
EN 60320-2-4:2006 |
|
|
Appliance couplers for household and similar general purposes — Part 2-4: Couplers dependent on appliance weight for engagement (IEC 60320-2-4:2005) |
None |
— |
|
Cenelec |
EN 60332-1-1:2004 |
|
|
Tests on electric and optical fibre cables under fire conditions — Part 1-1: Test for vertical flame propagation for a single insulated wire or cable — Apparatus (IEC 60332-1-1:2004) |
EN 50265-1:1998 Note 2.1 |
Date expired (1.9.2007) |
|
Cenelec |
EN 60332-1-2:2004 |
|
|
Tests on electric and optical fibre cables under fire conditions — Part 1-2: Test for vertical flame propagation for a single insulated wire or cable — Procedure for 1 kW pre-mixed flame (IEC 60332-1-2:2004) |
EN 50265-2-1:1998 Note 2.1 |
Date expired (1.9.2007) |
|
Cenelec |
EN 60332-1-3:2004 |
|
|
Tests on electric and optical fibre cables under fire conditions — Part 1-3: Test for vertical flame propagation for a single insulated wire or cable — Procedure for determination of flaming droplets/particles (IEC 60332-1-3:2004) |
None |
— |
|
Cenelec |
EN 60332-2-1:2004 |
|
|
Tests on electric and optical fibre cables under fire conditions — Part 2-1: Test for vertical flame propagation for a single small insulated wire or cable — Apparatus (IEC 60332-2-1:2004) |
EN 50265-1:1998 Note 2.1 |
Date expired (1.9.2007) |
|
Cenelec |
EN 60332-2-2:2004 |
|
|
Tests on electric and optical fibre cables under fire conditions — Part 2-2: Test for vertical flame propagation for a single small insulated wire or cable — Procedure for diffusion flame (IEC 60332-2-2:2004) |
EN 50265-2-2:1998 Note 2.1 |
Date expired (1.9.2007) |
|
Cenelec |
EN 60335-1:1988 |
|
|
Safety of household and similar electrical appliances — Part 1: General requirements (IEC 60335-1:1983 (Modified)) |
HD 250 S1:1977 + HD 250.2 S1:1978 + HD 251 S3:1982 + A1:1985 + A2:1987 + A3:1987 Note 2.1 |
Date expired (1.1.1989) |
|
Amendment A2:1988 to EN 60335-1:1988 (IEC 60335-1:1976/A4:1984 (Modified)) |
Note 3 |
— |
|
Amendment A5:1989 to EN 60335-1:1988 (IEC 60335-1:1983/A5:1986 (Modified)) |
Note 3 |
— |
|
Amendment A6:1989 to EN 60335-1:1988 (IEC 60335-1:1983/A6:1988 (Modified)) |
Note 3 |
— |
|
Amendment A51:1991 to EN 60335-1:1988 |
Note 3 |
— |
|
Amendment A52:1992 to EN 60335-1:1988 |
Note 3 |
— |
|
Amendment A53:1992 to EN 60335-1:1988 |
Note 3 |
— |
|
Amendment A54:1992 to EN 60335-1:1988 |
Note 3 |
— |
|
Amendment A55:1993 to EN 60335-1:1988 |
Note 3 |
— |
|
Amendment A56:1995 to EN 60335-1:1988 |
Note 3 |
— |
|
Cenelec |
EN 60335-1:1994 |
|
|
Safety of household and similar electrical appliances — Part 1: General requirements (IEC 60335-1:1991 (Modified)) |
EN 60335-1:1988 and its amendments Note 2.1 |
— |
|
Amendment A11:1995 to EN 60335-1:1994 |
Note 3 |
— |
|
Amendment A15:2000 to EN 60335-1:1994 |
Note 3 |
— |
|
Amendment A16:2001 to EN 60335-1:1994 |
Note 3 |
— |
|
Amendment A13:1998 to EN 60335-1:1994 |
Note 3 |
Date expired (1.12.2000) |
|
Amendment A14:1998 to EN 60335-1:1994 |
Note 3 |
Date expired (1.7.2001) |
|
Amendment A1:1996 to EN 60335-1:1994 (IEC 60335-1:1991/A1:1994 (Modified)) |
EN 60335-2-19:1989 + EN 60335-2-20:1989 Note 3 |
Date expired (1.4.2004) |
|
Amendment A12:1996 to EN 60335-1:1994 |
Note 3 |
Date expired (1.4.2004) |
|
Amendment A2:2000 to EN 60335-1:1994 (IEC 60335-1:1991/A2:1999) |
Note 3 |
Date expired (1.8.2007) |
|
Cenelec |
EN 60335-1:2002 |
|
|
Household and similar electrical appliances — Safety — Part 1: General requirements (IEC 60335-1:2001 (Modified)) |
EN 60335-1:1994 and its amendments Note 2.1 |
— |
|
Amendment A11:2004 to EN 60335-1:2002 |
Note 3 |
Date expired (1.10.2006) |
|
Amendment A1:2004 to EN 60335-1:2002 (IEC 60335-1:2001/A1:2004) |
Note 3 |
Date expired (1.10.2007) |
|
Amendment A12:2006 to EN 60335-1:2002 |
Note 3 |
Date expired (1.10.2007) |
|
Amendment A2:2006 to EN 60335-1:2002 (IEC 60335-1:2001/A2:2006) |
Note 3 |
1.7.2009 |
|
Cenelec |
EN 60335-2-2:2003 |
|
|
Household and similar electrical appliances — Safety — Part 2-2: Particular requirements for vacuum cleaners and water-suction cleaning appliances (IEC 60335-2-2:2002 (Modified)) |
EN 60335-2-2:1995 Note 2.1 |
Date expired (1.3.2006) |
|
Amendment A1:2004 to EN 60335-2-2:2003 (IEC 60335-2-2:2002/A1:2004) |
Note 3 |
Date expired (1.9.2007) |
|
Amendment A2:2006 to EN 60335-2-2:2003 (IEC 60335-2-2:2002/A2:2006 (Modified)) |
Note 3 |
1.10.2009 |
|
Cenelec |
EN 60335-2-3:2002 |
|
|
Household and similar electrical appliances — Safety — Part 2-3: Particular requirements for electric irons (IEC 60335-2-3:2002) |
EN 60335-2-3:1995 + A1:1999 + A2:2000 Note 2.1 |
Date expired (1.10.2005) |
|
Amendment A1:2005 to EN 60335-2-3:2002 (IEC 60335-2-3:2002/A1:2004) |
Note 3 |
Date expired (1.4.2008) |
|
Cenelec |
EN 60335-2-4:2002 |
|
|
Household and similar electrical appliances — Safety — Part 2-4: Particular requirements for spin extractors (IEC 60335-2-4:2002) |
EN 60335-2-4:1995 + A1:1997 Note 2.1 |
Date expired (1.8.2007) |
|
Amendment A1:2004 to EN 60335-2-4:2002 (IEC 60335-2-4:2002/A1:2004) |
Note 3 |
Date expired (1.3.2007) |
|
Amendment A2:2006 to EN 60335-2-4:2002 (IEC 60335-2-4:2002/A2:2006) |
Note 3 |
1.4.2009 |
|
Cenelec |
EN 60335-2-5:2003 |
|
|
Household and similar electrical appliances — Safety — Part 2-5: Particular requirements for dishwashers (IEC 60335-2-5:2002 (Modified)) |
EN 60335-2-5:1995 + A1:1999 + A2:2000 Note 2.1 |
Date expired (1.3.2006) |
|
Amendment A1:2005 to EN 60335-2-5:2003 (IEC 60335-2-5:2002/A1:2005) |
Note 3 |
Date expired (1.2.2008) |
|
Cenelec |
EN 60335-2-6:2003 |
|
|
Household and similar electrical appliances — Safety — Part 2-6: Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances (IEC 60335-2-6:2002 (Modified)) |
EN 60335-2-6:1999 + A1:2001 Note 2.1 |
Date expired (1.3.2006) |
|
Amendment A1:2005 to EN 60335-2-6:2003 (IEC 60335-2-6:2002/A1:2004) |
Note 3 |
Date expired (1.12.2007) |
|
Cenelec |
EN 60335-2-7:2003 |
|
|
Household and similar electrical appliances — Safety — Part 2-7: Particular requirements for washing machines (IEC 60335-2-7:2002 (Modified)) |
EN 60335-2-7:2001 Note 2.1 |
Date expired (1.8.2007) |
|
Amendment A1:2004 to EN 60335-2-7:2003 (IEC 60335-2-7:2002/A1:2004) |
Note 3 |
Date expired (1.8.2007) |
|
Amendment A2:2006 to EN 60335-2-7:2003 (IEC 60335-2-7:2002/A2:2006) |
Note 3 |
1.4.2009 |
|
Cenelec |
EN 60335-2-8:2003 |
|
|
Household and similar electrical appliances — Safety — Part 2-8: Particular requirements for shavers, hair clippers and similar appliances (IEC 60335-2-8:2002 (Modified)) |
EN 60335-2-8:1995 + A1:2001 Note 2.1 |
Date expired (1.3.2006) |
|
Amendment A1:2005 to EN 60335-2-8:2003 (IEC 60335-2-8:2002/A1:2005) |
Note 3 |
1.9.2008 |
|
Cenelec |
EN 60335-2-9:2003 |
|
|
Household and similar electrical appliances — Safety — Part 2-9: Particular requirements for grills, toasters and similar portable cooking appliances (IEC 60335-2-9:2002 (Modified)) Note 9 |
EN 60335-2-9:1995 + A1:1998 + A2:2000 + A11:2000 + A12:2002 + A13:2002 Note 2.1 |
Date expired (1.3.2006) |
|
Amendment A1:2004 to EN 60335-2-9:2003 (IEC 60335-2-9:2002/A1:2004) |
Note 3 |
Date expired (1.3.2007) |
|
Amendment A2:2006 to EN 60335-2-9:2003 (IEC 60335-2-9:2002/A2:2006) |
Note 3 |
1.4.2009 |
|
Amendment A12:2007 to EN 60335-2-9:2003 |
Note 3 |
1.10.2010 |
|
Cenelec |
EN 60335-2-10:2003 |
|
|
Household and similar electrical appliances — Safety — Part 2-10: Particular requirements for floor treatment machines and wet scrubbing machines (IEC 60335-2-10:2002) |
EN 60335-2-10:1995 Note 2.1 |
Date expired (1.4.2006) |
|
Cenelec |
EN 60335-2-11:2003 |
|
|
Household and similar electrical appliances — Safety — Part 2-11: Particular requirements for tumble dryers (IEC 60335-2-11:2002 (Modified)) |
EN 60335-2-11:2001 + A1:2001 + A11:2002 Note 2.1 |
Date expired (1.8.2007) |
|
Amendment A1:2004 to EN 60335-2-11:2003 (IEC 60335-2-11:2002/A1:2003) |
Note 3 |
Date expired (1.8.2007) |
|
Amendment A2:2006 to EN 60335-2-11:2003 (IEC 60335-2-11:2002/A2:2006) |
Note 3 |
1.5.2009 |
|
Cenelec |
EN 60335-2-12:2003 |
|
|
Household and similar electrical appliances — Safety — Part 2-12: Particular requirements for warming plates and similar appliances (IEC 60335-2-12:2002) |
EN 60335-2-12:1995 Note 2.1 |
Date expired (1.5.2006) |
|
Cenelec |
EN 60335-2-13:2003 |
|
|
Household and similar electrical appliances — Safety — Part 2-13: Particular requirements for deep fat fryers, frying pans and similar appliances (IEC 60335-2-13:2002 (Modified)) |
EN 60335-2-13:1995 + A2:1998 Note 2.1 |
Date expired (1.4.2006) |
|
Amendment A1:2004 to EN 60335-2-13:2003 (IEC 60335-2-13:2002/A1:2004) |
Note 3 |
Date expired (1.7.2007) |
|
Cenelec |
EN 60335-2-14:2003 |
|
|
Household and similar electrical appliances — Safety — Part 2-14: Particular requirements for kitchen machines (IEC 60335-2-14:2002 (Modified)) |
EN 60335-2-14:1996 + A1:1998 + A2:2000 + A11:1998 Note 2.1 |
Date expired (1.5.2006) |
|
Cenelec |
EN 60335-2-14:2006 |
|
|
Household and similar electrical appliances — Safety — Part 2-14: Particular requirements for kitchen machines (IEC 60335-2-14:2006 (Modified)) |
EN 60335-2-14:2003 Note 2.1 |
1.7.2009 |
|
Cenelec |
EN 60335-2-15:2002 |
|
|
Household and similar electrical appliances — Safety — Part 2-15: Particular requirements for appliances for heating liquids (IEC 60335-2-15:2002) |
EN 60335-2-15:1996 + A1:1999 + A2:2000 Note 2.1 |
Date expired (1.7.2007) |
|
Amendment A1:2005 to EN 60335-2-15:2002 (IEC 60335-2-15:2002/A1:2005) |
Note 3 |
1.9.2008 |
|
Cenelec |
EN 60335-2-16:2003 |
|
|
Household and similar electrical appliances — Safety — Part 2-16: Particular requirements for food waste disposers (IEC 60335-2-16:2002 (Modified)) |
EN 60335-2-16:1996 Note 2.1 |
Date expired (1.7.2006) |
|
Cenelec |
EN 60335-2-17:2002 |
|
|
Household and similar electrical appliances — Safety — Part 2-17: Particular requirements for blankets, pads and similar flexible heating appliances (IEC 60335-2-17:2002) |
EN 60335-2-17:1999 Note 2.1 |
Date expired (1.11.2005) |
|
Amendment A1:2006 to EN 60335-2-17:2002 (IEC 60335-2-17:2002/A1:2006) |
Note 3 |
1.3.2009 |
|
Cenelec |
EN 60335-2-21:2003 |
|
|
Household and similar electrical appliances — Safety — Part 2-21: Particular requirements for storage water heaters (IEC 60335-2-21:2002 (Modified)) |
EN 60335-2-21:1999 + A1:2000 + A11:2002 + A12:2002 Note 2.1 |
Date expired (1.3.2006) |
|
Amendment A1:2005 to EN 60335-2-21:2003 (IEC 60335-2-21:2002/A1:2004) |
Note 3 |
Date expired (1.11.2007) |
|
Cenelec |
EN 60335-2-23:2003 |
|
|
Household and similar electrical appliances — Safety — Part 2-23: Particular requirements for appliances for skin or hair care (IEC 60335-2-23:2003) |
EN 60335-2-23:1996 + A1:2001 Note 2.1 |
Date expired (1.5.2006) |
|
Cenelec |
EN 60335-2-24:2003 |
|
|
Household and similar electrical appliances — Safety — Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice-makers (IEC 60335-2-24:2002) |
EN 60335-2-24:2000 + A11:2004 Note 2.1 |
Date expired (1.8.2007) |
|
Amendment A11:2004 to EN 60335-2-24:2003 |
Note 3 |
Date expired (1.8.2007) |
|
Amendment A1:2005 to EN 60335-2-24:2003 (IEC 60335-2-24:2002/A1:2005) |
Note 3 |
Date expired (1.3.2008) |
|
Amendment A2:2007 to EN 60335-2-24:2003 (IEC 60335-2-24:2002/A2:2007) |
Note 3 |
1.2.2010 |
|
Cenelec |
EN 60335-2-25:2002 |
|
|
Household and similar electrical appliances — Safety — Part 2-25: Particular requirements for microwave ovens, including combination microwave ovens (IEC 60335-2-25:2002) |
EN 60335-2-25:1996 + A1:2000 Note 2.1 |
Date expired (1.10.2005) |
|
Amendment A1:2005 to EN 60335-2-25:2002 (IEC 60335-2-25:2002/A1:2005) |
Note 3 |
Date expired (1.6.2008) |
|
Amendment A2:2006 to EN 60335-2-25:2002 (IEC 60335-2-25:2002/A2:2006) |
Note 3 |
1.7.2009 |
|
Cenelec |
EN 60335-2-26:2003 |
|
|
Household and similar electrical appliances — Safety — Part 2-26: Particular requirements for clocks (IEC 60335-2-26:2002) |
EN 60335-2-26:1996 Note 2.1 |
Date expired (1.5.2006) |
|
Cenelec |
EN 60335-2-27:2003 |
|
|
Household and similar electrical appliances — Safety — Part 2-27: Particular requirements for appliances for skin exposure to ultraviolet and infrared radiation (IEC 60335-2-27:2002) Note 12 |
EN 60335-2-27:1997 + A1:2000 Note 2.1 |
Date expired (1.5.2006) |
|
Cenelec |
EN 60335-2-28:2003 |
|
|
Household and similar electrical appliances — Safety — Part 2-28: Particular requirements for sewing machines (IEC 60335-2-28:2002 (Modified)) |
EN 60335-2-28:1996 Note 2.1 |
Date expired (1.4.2006) |
|
Cenelec |
EN 60335-2-29:2004 |
|
|
Household and similar electrical appliances — Safety — Part 2-29: Particular requirements for battery chargers (IEC 60335-2-29:2002 + A1:2004) |
EN 60335-2-29:1996 + A11:1997 Note 2.1 |
Date expired (1.6.2007) |
|
Cenelec |
EN 60335-2-30:2003 |
|
|
Household and similar electrical appliances — Safety — Part 2-30: Particular requirements for room heaters (IEC 60335-2-30:2002 (Modified)) |
EN 60335-2-30:1997 + A1:2000 Note 2.1 |
Date expired (1.3.2006) |
|
Amendment A1:2004 to EN 60335-2-30:2003 (IEC 60335-2-30:2002/A1:2004) |
Note 3 |
Date expired (1.9.2007) |
|
Amendment A2:2007 to EN 60335-2-30:2003 (IEC 60335-2-30:2002/A2:2007) |
Note 3 |
1.5.2010 |
|
Cenelec |
EN 60335-2-31:2003 |
|
|
Household and similar electrical appliances — Safety — Part 2-31: Particular requirements for range hoods (IEC 60335-2-31:2002) |
EN 60335-2-31:1997 + A1:1999 Note 2.1 |
Date expired (1.5.2006) |
|
Amendment A1:2006 to EN 60335-2-31:2003 (IEC 60335-2-31:2002/A1:2006) |
Note 3 |
1.5.2009 |
|
Cenelec |
EN 60335-2-32:2003 |
|
|
Household and similar electrical appliances — Safety — Part 2-32: Particular requirements for massage appliances (IEC 60335-2-32:2002) |
EN 60335-2-32:1995 + A1:2000 Note 2.1 |
Date expired (1.4.2006) |
|
Cenelec |
EN 60335-2-34:2002 |
|
|
Household and similar electrical appliances — Safety — Part 2-34: Particular requirements for motor-compressors (IEC 60335-2-34:2002) |
EN 60335-2-34:2000 + A11:2004 Note 2.1 |
Date expired (1.12.2005) |
|
Amendment A11:2004 to EN 60335-2-34:2002 |
Note 3 |
Date expired (1.12.2006) |
|
Amendment A1:2005 to EN 60335-2-34:2002 (IEC 60335-2-34:2002/A1:2004) |
Note 3 |
Date expired (1.2.2008) |
|
Cenelec |
EN 60335-2-35:2002 |
|
|
Household and similar electrical appliances — Safety — Part 2-35: Particular requirements for instantaneous water heaters (IEC 60335-2-35:2002) |
EN 60335-2-35:1998 + A1:2000 Note 2.1 |
Date expired (1.11.2005) |
|
Amendment A1:2007 to EN 60335-2-35:2002 (IEC 60335-2-35:2002/A1:2006) |
Note 3 |
1.11.2009 |
|
Cenelec |
EN 60335-2-36:2002 |
|
|
Household and similar electrical appliances — Safety — Part 2-36: Particular requirements for commercial electric cooking ranges, ovens, hobs and hob elements (IEC 60335-2-36:2002) |
EN 60335-2-36:2000 Note 2.1 |
Date expired (1.12.2005) |
|
Amendment A1:2004 to EN 60335-2-36:2002 (IEC 60335-2-36:2002/A1:2004) |
Note 3 |
Date expired (1.7.2007) |
|
Cenelec |
EN 60335-2-37:2002 |
|
|
Household and similar electrical appliances — Safety — Part 2-37: Particular requirements for commercial electric deep fat fryers (IEC 60335-2-37:2002) |
EN 60335-2-37:2000 Note 2.1 |
Date expired (1.12.2005) |
|
Cenelec |
EN 60335-2-38:2003 |
|
|
Household and similar electrical appliances — Safety — Part 2-38: Particular requirements for commercial electric griddles and griddle grills (IEC 60335-2-38:2002) |
EN 60335-2-38:2000 Note 2.1 |
Date expired (1.2.2006) |
|
Cenelec |
EN 60335-2-39:2003 |
|
|
Household and similar electrical appliances — Safety — Part 2-39: Particular requirements for commercial electric multi-purpose cooking pans (IEC 60335-2-39:2002) |
EN 60335-2-39:2000 Note 2.1 |
Date expired (1.2.2006) |
|
Amendment A1:2004 to EN 60335-2-39:2003 (IEC 60335-2-39:2002/A1:2004) |
Note 3 |
Date expired (1.7.2007) |
|
Cenelec |
EN 60335-2-40:2003 |
|
|
Household and similar electrical appliances — Safety — Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers (IEC 60335-2-40:2002 (Modified)) |
EN 60335-2-40:1997 + A1:2000 + A11:2004 Note 2.1 |
Date expired (1.3.2007) |
|
Amendment A11:2004 to EN 60335-2-40:2003 |
Note 3 |
Date expired (1.3.2007) |
|
Amendment A12:2005 to EN 60335-2-40:2003 |
Note 3 |
Date expired (1.11.2007) |
|
Amendment A1:2006 to EN 60335-2-40:2003 (IEC 60335-2-40:2002/A1:2005 (Modified)) |
Note 3 |
1.9.2008 |
|
Cenelec |
EN 60335-2-41:2003 |
|
|
Household and similar electrical appliances — Safety — Part 2-41: Particular requirements for pumps (IEC 60335-2-41:2002) |
EN 60335-2-41:1996 + A1:2001 Note 2.1 |
Date expired (1.5.2006) |
|
Amendment A1:2004 to EN 60335-2-41:2003 (IEC 60335-2-41:2002/A1:2004) |
Note 3 |
Date expired (1.3.2007) |
|
Cenelec |
EN 60335-2-42:2003 |
|
|
Household and similar electrical appliances — Safety — Part 2-42: Particular requirements for commercial electric forced convection ovens, steam cookers and steam-convection ovens (IEC 60335-2-42:2002) |
EN 60335-2-42:2000 Note 2.1 |
Date expired (1.2.2006) |
|
Cenelec |
EN 60335-2-43:2003 |
|
|
Household and similar electrical appliances — Safety — Part 2-43: Particular requirements for clothes dryers and towel rails (IEC 60335-2-43:2002) |
EN 60335-2-43:1997 Note 2.1 |
Date expired (1.5.2006) |
|
Amendment A1:2006 to EN 60335-2-43:2003 (IEC 60335-2-43:2002/A1:2005) |
Note 3 |
1.11.2008 |
|
Cenelec |
EN 60335-2-44:2002 |
|
|
Household and similar electrical appliances — Safety — Part 2-44: Particular requirements for ironers (IEC 60335-2-44:2002) |
EN 60335-2-44:1997 Note 2.1 |
Date expired (1.11.2005) |
|
Cenelec |
EN 60335-2-45:2002 |
|
|
Household and similar electrical appliances — Safety — Part 2-45: Particular requirements for portable heating tools and similar appliances (IEC 60335-2-45:2002) |
EN 60335-2-45:1996 Note 2.1 |
Date expired (1.12.2005) |
|
Cenelec |
EN 60335-2-47:2003 |
|
|
Household and similar electrical appliances — Safety — Part 2-47: Particular requirements for commercial electric boiling pans (IEC 60335-2-47:2002) |
EN 60335-2-47:2000 Note 2.1 |
Date expired (1.2.2006) |
|
Cenelec |
EN 60335-2-48:2003 |
|
|
Household and similar electrical applicances — Safety — Part 2-48: Particular requirements for commercial electric grillers and toasters (IEC 60335-2-48:2002) |
EN 60335-2-48:2000 Note 2.1 |
Date expired (1.2.2006) |
|
Cenelec |
EN 60335-2-49:2003 |
|
|
Household and similar electrical appliances — Safety — Part 2-49: Particular requirements for commercial electric hot cupboards (IEC 60335-2-49:2002) |
EN 60335-2-49:2000 Note 2.1 |
Date expired (1.2.2006) |
|
Cenelec |
EN 60335-2-50:2003 |
|
|
Household and similar electrical appliances — Safety — Part 2-50: Particular requirements for commercial electric bains-marie (IEC 60335-2-50:2002) |
EN 60335-2-50:2000 Note 2.1 |
Date expired (1.2.2006) |
|
Cenelec |
EN 60335-2-51:2003 |
|
|
Household and similar electrical appliances — Safety — Part 2-51: Particular requirements for stationary circulation pumps for heating and service water installations (IEC 60335-2-51:2002) |
EN 60335-2-51:1997 Note 2.1 |
Date expired (1.5.2006) |
|
Cenelec |
EN 60335-2-52:2003 |
|
|
Household and similar electrical appliances — Safety — Part 2-52: Particular requirements for oral hygiene appliances (IEC 60335-2-52:2002) |
EN 60335-2-52:1996 Note 2.1 |
Date expired (1.5.2006) |
|
Cenelec |
EN 60335-2-53:2003 |
|
|
Household and similar electrical appliances — Safety — Part 2-53: Particular requirements for sauna heating appliances (IEC 60335-2-53:2002) |
EN 60335-2-53:1997 Note 2.1 |
Date expired (1.5.2006) |
|
Amendment A1:2007 to EN 60335-2-53:2003 (IEC 60335-2-53:2002/A1:2007) |
Note 3 |
1.2.2010 |
|
Cenelec |
EN 60335-2-54:2003 |
|
|
Household and similar electrical appliances — Safety — Part 2-54: Particular requirements for surface-cleaning appliances for household use employing liquids or steam (IEC 60335-2-54:2002) |
EN 60335-2-54:1997 + A1:1999 + A11:1998 Note 2.1 |
Date expired (1.5.2006) |
|
Amendment A1:2004 to EN 60335-2-54:2003 (IEC 60335-2-54:2002/A1:2004) |
Note 3 |
Date expired (1.7.2007) |
|
Amendment A11:2006 to EN 60335-2-54:2003 |
Note 3 |
1.11.2008 |
|
Amendment A2:2007 to EN 60335-2-54:2003 (IEC 60335-2-54:2002/A2:2007) |
Note 3 |
1.2.2010 |
|
Cenelec |
EN 60335-2-55:2003 |
|
|
Household and similar electrical appliances — Safety — Part 2-55: Particular requirements for electrical appliances for use with aquariums and garden ponds (IEC 60335-2-55:2002) |
EN 60335-2-55:1997 Note 2.1 |
Date expired (1.5.2006) |
|
Cenelec |
EN 60335-2-56:2003 |
|
|
Household and similar electrical appliances — Safety — Part 2-56: Particular requirements for projectors and similar appliances (IEC 60335-2-56:2002) |
EN 60335-2-56:1997 Note 2.1 |
Date expired (1.3.2006) |
|
Cenelec |
EN 60335-2-58:2005 |
|
|
Household and similar electrical appliances — Safety — Part 2-58: Particular requirements for commercial electric dishwashing machines (IEC 60335-2-58:2002 (Modified)) |
EN 60335-2-58:1997 + A1:1999 Note 2.1 |
Date expired (1.12.2007) |
|
Cenelec |
EN 60335-2-59:2003 |
|
|
Household and similar electrical appliances — Safety — Part 2-59: Particular requirements for insect killers (IEC 60335-2-59:2002 (Modified)) |
EN 60335-2-59:1997 + A1:2001 + A11:2000 Note 2.1 |
Date expired (1.5.2006) |
|
Amendment A1:2006 to EN 60335-2-59:2003 (IEC 60335-2-59:2002/A1:2006) |
Note 3 |
1.3.2009 |
|
Cenelec |
EN 60335-2-60:2003 |
|
|
Household and similar electrical appliances — Safety — Part 2-60: Particular requirements for whirlpool baths and whirlpool spas (IEC 60335-2-60:2002) |
EN 60335-2-60:1997 Note 2.1 |
Date expired (1.5.2006) |
|
Amendment A1:2005 to EN 60335-2-60:2003 (IEC 60335-2-60:2002/A1:2004) |
Note 3 |
Date expired (1.2.2008) |
|
Cenelec |
EN 60335-2-61:2003 |
|
|
Household and similar electrical appliances — Safety — Part 2-61: Particular requirements for thermal-storage room heaters (IEC 60335-2-61:2002) |
EN 60335-2-61:1996 + A1:2000 Note 2.1 |
Date expired (1.5.2006) |
|
Amendment A1:2005 to EN 60335-2-61:2003 (IEC 60335-2-61:2002/A1:2005) |
Note 3 |
Date expired (1.5.2008) |
|
Cenelec |
EN 60335-2-62:2003 |
|
|
Household and similar electrical appliances — Safety — Part 2-62: Particular requirements for commercial electric rinsing sinks (IEC 60335-2-62:2002) |
EN 60335-2-62:1997 + A1:1999 + A2:2000 Note 2.1 |
Date expired (1.2.2006) |
|
Cenelec |
EN 60335-2-65:2003 |
|
|
Household and similar electrical appliances — Safety — Part 2-65: Particular requirements for air-cleaning appliances (IEC 60335-2-65:2002) |
EN 60335-2-65:1995 + A1:2001 Note 2.1 |
Date expired (1.5.2006) |
|
Cenelec |
EN 60335-2-66:2003 |
|
|
Household and similar electrical appliances — Safety — Part 2-66: Particular requirements for water-bed heaters (IEC 60335-2-66:2002) |
EN 60335-2-66:1995 + A1:2001 Note 2.1 |
Date expired (1.3.2006) |
|
Cenelec |
EN 60335-2-67:2003 |
|
|
Household and similar electrical appliances — Safety — Part 2-67: Particular requirements for floor treatment and floor cleaning machines, for industrial and commercial use (IEC 60335-2-67:2002 (Modified)) |
EN 60335-2-67:1998 + A1:2000 Note 2.1 |
Date expired (1.3.2006) |
|
Amendment A1:2006 to EN 60335-2-67:2003 (IEC 60335-2-67:2002/A1:2005) |
Note 3 |
1.12.2008 |
|
Cenelec |
EN 60335-2-68:2003 |
|
|
Household and similar electrical appliances — Safety — Part 2-68: Particular requirements for spray extraction appliances, for industrial and commercial use (IEC 60335-2-68:2002 (Modified)) |
EN 60335-2-68:1998 + A1:2000 Note 2.1 |
Date expired (1.3.2006) |
|
Amendment A1:2006 to EN 60335-2-68:2003 (IEC 60335-2-68:2002/A1:2005) |
Note 3 |
1.12.2008 |
|
Amendment A2:2007 to EN 60335-2-68:2003 (IEC 60335-2-68:2002/A2:2007) |
Note 3 |
1.5.2010 |
|
Cenelec |
EN 60335-2-69:2003 |
|
|
Household and similar electrical appliances — Safety — Part 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush, for industrial and commercial use (IEC 60335-2-69:2002 (Modified)) |
EN 60335-2-69:1998 + A1:2000 + A11:2002 Note 2.1 |
Date expired (1.3.2006) |
|
Cenelec |
EN 60335-2-70:2002 |
|
|
Household and similar electrical appliances — Safety — Part 2-70: Particular requirements for milking machines (IEC 60335-2-70:2002) |
EN 60335-2-70:1996 Note 2.1 |
Date expired (1.10.2005) |
|
Amendment A1:2007 to EN 60335-2-70:2002 (IEC 60335-2-70:2002/A1:2007) |
Note 3 |
1.4.2010 |
|
Cenelec |
EN 60335-2-71:2003 |
|
|
Household and similar electrical appliances — Safety — Part 2-71: Particular requirements for electrical heating appliances for breeding and rearing animals (IEC 60335-2-71:2002 (Modified)) |
EN 60335-2-71:1995 + A1:1998 + A2:1999 Note 2.1 |
Date expired (1.6.2006) |
|
Amendment A1:2007 to EN 60335-2-71:2003 (IEC 60335-2-71:2002/A1:2007) |
Note 3 |
1.4.2010 |
|
Cenelec |
EN 60335-2-73:2003 |
|
|
Household and similar electrical appliances — Safety — Part 2-73: Particular requirements for fixed immersion heaters (IEC 60335-2-73:2002 (Modified)) |
EN 60335-2-73:1996 Note 2.1 |
Date expired (1.5.2006) |
|
Amendment A1:2006 to EN 60335-2-73:2003 (IEC 60335-2-73:2002/A1:2006) |
Note 3 |
1.3.2009 |
|
Cenelec |
EN 60335-2-74:2003 |
|
|
Household and similar electrical appliances — Safety — Part 2-74: Particular requirements for portable immersion heaters (IEC 60335-2-74:2002) |
EN 60335-2-74:1996 Note 2.1 |
Date expired (1.3.2006) |
|
Amendment A1:2006 to EN 60335-2-74:2003 (IEC 60335-2-74:2002/A1:2006) |
Note 3 |
1.6.2009 |
|
Cenelec |
EN 60335-2-75:2004 |
|
|
Household and similar electrical appliances — Safety — Part 2-75: Particular requirements for commercial dispensing appliances and vending machines (IEC 60335-2-75:2002 (Modified)) |
EN 60335-2-63:1993 + EN 60335-2-75:2002 Note 2.1 |
Date expired (1.3.2007) |
|
Amendment A11:2006 to EN 60335-2-75:2004 |
Note 3 |
Date expired (1.12.2006) |
|
Amendment A1:2005 to EN 60335-2-75:2004 (IEC 60335-2-75:2002/A1:2004) |
Note 3 |
Date expired (1.12.2007) |
|
Cenelec |
EN 60335-2-78:2003 |
|
|
Household and similar electrical appliances — Safety — Part 2-78: Particular requirements for outdoor barbecues (IEC 60335-2-78:2002) |
EN 60335-2-78:1997 Note 2.1 |
Date expired (1.5.2006) |
|
Cenelec |
EN 60335-2-79:2004 |
|
|
Household and similar electrical appliances — Safety — Part 2-79: Particular requirements for high-pressure cleaners and steam cleaners (IEC 60335-2-79:2002 (Modified)) |
EN 60335-2-79:1998 + A1:2001 + A11:1999 Note 2.1 |
Date expired (1.4.2007) |
|
Amendment A1:2006 to EN 60335-2-79:2004 (IEC 60335-2-79:2002/A1:2004) |
Note 3 |
1.3.2009 |
|
Amendment A2:2007 to EN 60335-2-79:2004 (IEC 60335-2-79:2002/A2:2007) |
Note 3 |
1.8.2010 |
|
Cenelec |
EN 60335-2-80:2003 |
|
|
Household and similar electrical appliances — Safety — Part 2-80: Particular requirements for fans (IEC 60335-2-80:2002) |
EN 60335-2-80:1997 Note 2.1 |
Date expired (1.3.2006) |
|
Amendment A1:2004 to EN 60335-2-80:2003 (IEC 60335-2-80:2002/A1:2004) |
Note 3 |
Date expired (1.3.2007) |
|
Cenelec |
EN 60335-2-81:2003 |
|
|
Household and similar electrical appliances — Safety — Part 2-81: Particular requirements for foot warmers and heating mats (IEC 60335-2-81:2002) |
EN 60335-2-81:1997 Note 2.1 |
Date expired (1.3.2006) |
|
Amendment A1:2007 to EN 60335-2-81:2003 (IEC 60335-2-81:2002/A1:2007) |
Note 3 |
1.2.2010 |
|
Cenelec |
EN 60335-2-82:2003 |
|
|
Household and similar electrical appliances — Safety — Part 2-82: Particular requirements for amusement machines and personal service machines (IEC 60335-2-82:2002) |
EN 60335-2-82:2000 Note 2.1 |
Date expired (1.5.2006) |
|
Cenelec |
EN 60335-2-83:2002 |
|
|
Household and similar electrical appliances — Safety — Part 2-83: Particular requirements for heated gullies for roof drainage (IEC 60335-2-83:2001) |
None |
— |
|
Cenelec |
EN 60335-2-84:2003 |
|
|
Household and similar electrical appliances — Safety — Part 2-84: Particular requirements for toilets (IEC 60335-2-84:2002) |
EN 60335-2-84:1998 Note 2.1 |
Date expired (1.5.2006) |
|
Cenelec |
EN 60335-2-85:2003 |
|
|
Household and similar electrical appliances — Safety — Part 2-85: Particular requirements for fabric steamers (IEC 60335-2-85:2002) |
EN 60335-2-85:1998 + A1:2000 Note 2.1 |
Date expired (1.5.2006) |
|
Cenelec |
EN 60335-2-86:2003 |
|
|
Household and similar electrical appliances — Safety — Part 2-86: Particular requirements for electric fishing machines (IEC 60335-2-86:2002 (Modified)) |
EN 60335-2-86:2000 Note 2.1 |
Date expired (1.8.2007) |
|
Amendment A1:2005 to EN 60335-2-86:2003 (IEC 60335-2-86:2002/A1:2005) |
Note 3 |
Date expired (1.5.2008) |
|
Cenelec |
EN 60335-2-87:2002 |
|
|
Household and similar electrical appliances — Safety — Part 2-87: Particular requirements for electrical animal-stunning equipment (IEC 60335-2-87:2002) |
EN 60335-2-87:1999 Note 2.1 |
Date expired (1.10.2005) |
|
Amendment A1:2007 to EN 60335-2-87:2002 (IEC 60335-2-87:2002/A1:2007) |
Note 3 |
1.4.2010 |
|
Cenelec |
EN 60335-2-88:2002 |
|
|
Household and similar electrical appliances — Safety — Part 2-88: Particular requirements for humidifiers intended for use with heating, ventilation, or air-conditioning systems (IEC 60335-2-88:2002) |
EN 60335-2-88:1997 Note 2.1 |
Date expired (1.12.2005) |
|
Cenelec |
EN 60335-2-89:2002 |
|
|
Household and similar electrical appliances — Safety — Part 2-89: Particular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant condensing unit or compressor (IEC 60335-2-89:2002) |
None |
— |
|
Amendment A11:2004 to EN 60335-2-89:2002 |
Note 3 |
Date expired (1.3.2007) |
|
Amendment A1:2005 to EN 60335-2-89:2002 (IEC 60335-2-89:2002/A1:2005) |
Note 3 |
Date expired (1.2.2008) |
|
Amendment A2:2007 to EN 60335-2-89:2002 (IEC 60335-2-89:2002/A2:2007) |
Note 3 |
1.2.2010 |
|
Cenelec |
EN 60335-2-90:2002 |
|
|
Household and similar electrical appliances — Safety — Part 2-90: Particular requirements for commercial microwave ovens (IEC 60335-2-90:2002) |
EN 60335-2-90:1997 Note 2.1 |
Date expired (1.10.2005) |
|
Amendment A1:2003 to EN 60335-2-90:2002 (IEC 60335-2-90:2002/A1:2003) |
Note 3 |
Date expired (1.9.2006) |
|
Cenelec |
EN 60335-2-90:2006 |
|
|
Household and similar electrical appliances — Safety — Part 2-90: Particular requirements for commercial microwave ovens (IEC 60335-2-90:2006) |
EN 60335-2-90:2002 and its amendment Note 2.1 |
1.3.2009 |
|
Cenelec |
EN 60335-2-96:2002 |
|
|
Household and similar electrical appliances — Safety — Part 2-96: Particular requirements for flexible sheet heating elements for room heating (IEC 60335-2-96:2002) |
None |
— |
|
Amendment A1:2004 to EN 60335-2-96:2002 (IEC 60335-2-96:2002/A1:2003) |
Note 3 |
Date expired (1.12.2006) |
|
Cenelec |
EN 60335-2-97:2000 |
|
|
Safety of household and similar electrical appliances — Part 2-97: Particular requirements for drives for rolling shutters, awnings, blinds and similar equipment (IEC 60335-2-97:1998 (Modified)) |
None |
— |
|
Amendment A11:2006 to EN 60335-2-97:2000 |
Note 3 |
1.4.2009 |
|
Cenelec |
EN 60335-2-97:2006 |
|
|
Household and similar electrical appliances — Safety — Part 2-97: Particular requirements for drives for rolling shutters, awnings, blinds and similar equipment (IEC 60335-2-97:2002 (Modified) + A1:2004 (Modified)) |
EN 60335-2-97:2000 and its amendment Note 2.1 |
1.4.2009 |
|
Cenelec |
EN 60335-2-98:2003 |
|
|
Household and similar electrical appliances — Safety — Part 2-98: Particular requirements for humidifiers (IEC 60335-2-98:2002) |
EN 60335-2-98:1997 + A1:2000 Note 2.1 |
Date expired (1.5.2006) |
|
Amendment A1:2005 to EN 60335-2-98:2003 (IEC 60335-2-98:2002/A1:2004) |
Note 3 |
Date expired (1.12.2007) |
|
Cenelec |
EN 60335-2-99:2003 |
|
|
Household and similar electrical appliances — Safety — Part 2-99: Particular requirements for commercial electric hoods (IEC 60335-2-99:2003) |
None |
— |
|
Cenelec |
EN 60335-2-101:2002 |
|
|
Household and similar electrical appliances — Safety — Part 2-101: Particular requirements for vaporizers (IEC 60335-2-101:2002) |
None |
— |
|
Cenelec |
EN 60335-2-102:2006 |
|
|
Household and similar electrical appliances — Safety — Part 2-102: Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections (IEC 60335-2-102:2004 (Modified)) |
EN 50165:1997 and its amendment Note 2.1 |
1.4.2009 |
|
Cenelec |
EN 60335-2-105:2005 |
|
|
Household and similar electrical appliances — Safety — Part 2-105: Particular requirements for multifunctional shower cabinets (IEC 60335-2-105:2004) |
None |
— |
|
Cenelec |
EN 60335-2-106:2007 |
|
|
Household and similar electrical appliances — Safety — Part 2-106: Particular requirements for heated carpets and for heating units for room heating installed under removable floor coverings (IEC 60335-2-106:2007) |
None |
— |
|
Cenelec |
EN 60360:1998 |
|
|
Standard method of measurement of lamp cap temperature rise (IEC 60360:1998) |
EN 60360:1989 + A1:1994 + A2:1997 Note 2.1 |
Date expired (1.5.2001) |
|
Cenelec |
EN 60399:2004 |
|
|
Barrel thread for lampholders with shade holder ring (IEC 60399:2004) |
EN 60399:1993 + A1:1997 + A2:1999 Note 2.1 |
Date expired (1.10.2007) |
|
Cenelec |
EN 60400:2000 |
|
|
Lampholders for tubular fluorescent lamps and starterholders (IEC 60400:1999 (Modified)) |
EN 60400:1996 + A1:1997 + A2:1998 Note 2.1 |
Date expired (1.1.2007) |
|
Amendment A1:2002 to EN 60400:2000 (IEC 60400:1999/A1:2002) |
Note 3 |
Date expired (1.1.2007) |
|
Amendment A2:2004 to EN 60400:2000 (IEC 60400:1999/A2:2004) |
Note 3 |
Date expired (1.10.2007) |
|
Cenelec |
EN 60423:2007 |
|
|
Conduit systems for cable management — Outside diameters of conduits for electrical installations and threads for conduits and fittings (IEC 60423:2007) |
None |
— |
|
Cenelec |
EN 60432-1:2000 |
|
|
Incandescent lamps — Safety specifications — Part 1: Tungsten filament lamps for domestic and similar general lighting purposes (IEC 60432-1:1999 (Modified)) |
EN 60432-1:1994 + A1:1997 + A2:1997 Note 2.1 |
Date expired (1.1.2003) |
|
Amendment A1:2005 to EN 60432-1:2000 (IEC 60432-1:1999/A1:2005) |
Note 3 |
Date expired (1.4.2008) |
|
Cenelec |
EN 60432-2:2000 |
|
|
Incandescent lamps — Safety specifications — Part 2: Tungsten halogen lamps for domestic and similar general lighting purposes (IEC 60432-2:1999 (Modified)) |
EN 60432-2:1994 + A1:1996 + A2:1997 Note 2.1 |
Date expired (1.1.2003) |
|
Amendment A1:2005 to EN 60432-2:2000 (IEC 60432-2:1999/A1:2005 (Modified)) |
Note 3 |
1.9.2008 |
|
Cenelec |
EN 60432-3:2003 |
|
|
Incandescent lamps — Safety specifications — Part 3: Tungsten-halogen lamps (non-vehicle) (IEC 60432-3:2002) |
None |
— |
|
Amendment A1:2005 to EN 60432-3:2003 (IEC 60432-3:2002/A1:2005) |
Note 3 |
Date expired (1.4.2008) |
|
Cenelec |
EN 60439-1:1999 |
|
|
Low-voltage switchgear and controlgear assemblies — Part 1: Type-tested and partially type-tested assemblies (IEC 60439-1:1999) |
EN 60439-1:1994 + A1:1995 + A2:1997 + A11:1996 Note 2.1 |
Date expired (1.8.2002) |
|
Amendment A1:2004 to EN 60439-1:1999 (IEC 60439-1:1999/A1:2004) |
Note 3 |
Date expired (1.4.2007) |
|
Cenelec |
EN 60439-2:2000 |
|
|
Low-voltage switchgear and controlgear assemblies — Part 2: Particular requirements for busbar trunking systems (busways) (IEC 60439-2:2000) |
EN 60439-2:1993 Note 2.1 |
Date expired (1.4.2003) |
|
Amendment A1:2005 to EN 60439-2:2000 (IEC 60439-2:2000/A1:2005) |
Note 3 |
1.10.2008 |
|
Cenelec |
EN 60439-3:1991 |
|
|
Low-voltage switchgear and controlgear assemblies — Part 3: Particular requirements for low-voltage switchgear and controlgear assemblies intended to be installed in places where unskilled persons have access for their use — Distribution boards (IEC 60439-3:1990 (Modified)) |
None |
— |
|
Amendment A1:1994 to EN 60439-3:1991 (IEC 60439-3:1990/A1:1993) |
Note 3 |
Date expired (1.12.1999) |
|
Amendment A2:2001 to EN 60439-3:1991 (IEC 60439-3:1990/A2:2001) |
Note 3 |
Date expired (1.5.2004) |
|
Cenelec |
EN 60439-4:2004 |
|
|
Low-voltage switchgear and controlgear assemblies — Part 4: Particular requirements for assemblies for construction sites (ACS) (IEC 60439-4:2004) |
EN 60439-4:1991 + A1:1995 + A2:1999 + A11:2004 Note 2.1 |
Date expired (1.9.2007) |
|
Cenelec |
EN 60439-5:1996 |
|
|
Low-voltage switchgear and controlgear assemblies — Part 5: Particular requirements for assemblies intended to be installed outdoors in public places — Cable distribution cabinets (CDCs) for power distribution in networks (IEC 60439-5:1996) |
None |
— |
|
Amendment A1:1998 to EN 60439-5:1996 (IEC 60439-5:1996/A1:1998) |
Note 3 |
Date expired (1.5.2001) |
|
Cenelec |
EN 60439-5:2006 |
|
|
Low-voltage switchgear and controlgear assemblies — Part 5: Particular requirements for assemblies for power distribution in public networks (IEC 60439-5:2006) |
EN 50300:2004 + EN 60439-5:1996 and its amendment Note 2.1 |
1.9.2009 |
|
Cenelec |
EN 60446:1999 |
|
|
Basic and safety principles for man-machine interface, marking and identification — Identification of conductors by colours or numerals (IEC 60446:1999) |
HD 324 S1:1977 Note 2.1 |
Date expired (1.4.2002) |
|
Cenelec |
EN 60446:2007 |
|
|
Basic and safety principles for man-machine interface, marking and identification — Identification of conductors by colours or alphanumerics (IEC 60446:2007) |
EN 60446:1999 Note 2.1 |
1.6.2010 |
|
Cenelec |
EN 60477:1997 |
|
|
Laboratory d.c. resistors (IEC 60477:1974) |
None |
— |
|
Amendment A1:1997 to EN 60477:1997 (IEC 60477:1974/A1:1997) |
Note 3 |
Date expired (1.9.1998) |
|
Cenelec |
EN 60477-2:1997 |
|
|
Laboratory resistors — Part 2: Laboratory a.c. resistors (IEC 60477-2:1979) |
None |
— |
|
Amendment A1:1997 to EN 60477-2:1997 (IEC 60477-2:1979/A1:1997) |
Note 3 |
Date expired (1.9.1998) |
|
Cenelec |
EN 60491:1995 |
|
|
Safety requirements for electronic flash apparatus for photographic purposes (IEC 60491:1984 (Modified)) |
HD 327 S2:1988 + A1:1991 Note 2.1 |
Date expired (1.9.1996) |
|
Cenelec |
EN 60519-1:2003 |
|
|
Safety in electroheat installations — Part 1: General requirements (IEC 60519-1:2003) |
EN 60519-1:1993 Note 2.1 |
Date expired (1.10.2006) |
|
Cenelec |
EN 60519-2:1993 |
|
|
Safety in electroheat installations — Part 2: Particular requirements for resistance heating equipment (IEC 60519-2:1992) |
None |
— |
|
Cenelec |
EN 60519-2:2006 |
|
|
Safety in electroheat installations — Part 2: Particular requirements for resistance heating equipment (IEC 60519-2:2006) |
EN 60519-2:1993 Note 2.1 |
1.9.2009 |
|
Cenelec |
EN 60519-3:2005 |
|
|
Safety in electroheat installations — Part 3: Particular requirements for induction and conduction heating and induction melting installations (IEC 60519-3:2005) |
EN 60519-3:1995 Note 2.1 |
Date expired (1.4.2008) |
|
Cenelec |
EN 60519-4:1997 |
|
|
Safety in electroheat installations — Part 4: Particular requirements for arc furnace installations (IEC 60519-4:1995) |
None |
— |
|
Amendment A1:2000 to EN 60519-4:1997 (IEC 60519-4:1995/A1:2000) |
Note 3 |
Date expired (1.2.2003) |
|
Cenelec |
EN 60519-4:2006 |
|
|
Safety in electroheat installations — Part 4: Particular requirements for arc furnace installations (IEC 60519-4:2006) |
EN 60519-4:1997 and its amendment Note 2.1 |
1.9.2009 |
|
Cenelec |
EN 60519-6:2002 |
|
|
Safety in electroheat installations — Part 6: Specifications for safety in industrial microwave heating equipment (IEC 60519-6:2002) |
None |
— |
|
Cenelec |
EN 60519-8:2005 |
|
|
Safety in electroheat installations — Part 8: Particular requirements for electroslag remelting furnaces (IEC 60519-8:2005) |
None |
— |
|
Cenelec |
EN 60519-9:1995 |
|
|
Safety in electroheat installations — Part 9: Particular requirements for high-frequency dielectric heating installations (IEC 60519-9:1987) |
HD 491.9 S1:1991 Note 2.1 |
Date expired (1.9.1996) |
|
Cenelec |
EN 60519-9:2005 |
|
|
Safety in electroheat installations — Part 9: Particular requirements for high-frequency dielectric heating installations (IEC 60519-9:2005) |
EN 60519-9:1995 Note 2.1 |
1.10.2008 |
|
Cenelec |
EN 60519-10:2005 |
|
|
Safety in electroheat installations — Part 10: Particular requirements for electrical resistance trace heating systems for industrial and commercial applications (IEC 60519-10:2005) |
None |
— |
|
Cenelec |
EN 60519-11:1997 |
|
|
Safety in electroheat installations — Part 11: Particular requirements for installations for electromagnetic stirring, transport or pouring of metal liquids (IEC 60519-11:1997) |
None |
— |
|
Cenelec |
EN 60519-21:1998 |
|
|
Safety in electroheat installations — Part 21: Particular requirements for resistance heating equipment — Heating and melting glass equipment (IEC 60519-21:1998) |
None |
— |
|
Cenelec |
EN 60523:1993 |
|
|
Direct-current potentiometers (IEC 60523:1975 + A1:1979) |
None |
— |
|
Amendment A2:1997 to EN 60523:1993 (IEC 60523:1975/A2:1997) |
Note 3 |
Date expired (1.7.1998) |
|
Cenelec |
EN 60524:1993 |
|
|
Direct-current resistive volt ratio boxes (IEC 60524:1975 + A1:1981) |
None |
— |
|
Amendment A2:1997 to EN 60524:1993 (IEC 60524:1975/A2:1997) |
Note 3 |
Date expired (1.7.1998) |
|
Cenelec |
EN 60529:1991 |
|
|
Degrees of protection provided by enclosures (IP Code) (IEC 60529:1989) |
None |
— |
|
Amendment A1:2000 to EN 60529:1991 (IEC 60529:1989/A1:1999) |
Note 3 |
Date expired (1.1.2003) |
|
Cenelec |
EN 60564:1993 |
|
|
D.C. bridges for measuring resistance (IEC 60564:1977 + A1:1981) |
None |
— |
|
Amendment A2:1997 to EN 60564:1993 (IEC 60564:1977/A2:1997) |
Note 3 |
Date expired (1.7.2003) |
|
Cenelec |
EN 60570:1996 |
|
|
Electrical supply track systems for luminaires (IEC 60570:1995) |
EN 60570:1993 Note 2.1 |
Date expired (1.3.2002) |
|
Amendment A2:2000 to EN 60570:1996 (IEC 60570:1995/A2:2000) |
EN 60570:1996/A11:1998 + A12:2000 Note 3 |
Date expired (1.8.2001) |
|
Amendment A1:1998 to EN 60570:1996 (IEC 60570:1995/A1:1998) |
Note 3 |
Date expired (1.4.2005) |
|
Cenelec |
EN 60570:2003 |
|
|
Electrical supply track systems for luminaires (IEC 60570:2003 (Modified)) |
EN 60570:1996 and its amendments + EN 60570-2-1:1994 and its amendment Note 2.1 |
1.3.2010 |
|
Cenelec |
EN 60570-2-1:1994 |
|
|
Electrical supply track systems for luminaires — Part 2: Mixed supply systems — Section 1: Classes I and III (IEC 60570-2-1:1994) |
None |
— |
|
Amendment A1:1996 to EN 60570-2-1:1994 (IEC 60570-2-1:1994/A1:1996) |
Note 3 |
Date expired (1.4.2002) |
|
Cenelec |
EN 60598-1:2004 |
|
|
Luminaires — Part 1: General requirements and tests (IEC 60598-1:2003 (Modified)) |
EN 60598-1:2000 + A11:2000 + A12:2002 Note 2.1 |
Date expired (1.7.2007) |
|
Amendment A1:2006 to EN 60598-1:2004 (IEC 60598-1:2003/A1:2006) |
Note 3 |
1.1.2010 |
|
Cenelec |
EN 60598-2-1:1989 |
|
|
Luminaires — Part 2: Particular requirements — Section 1: Fixed general purpose luminaires (IEC 60598-2-1:1979 + A1:1987) |
None |
— |
|
Cenelec |
EN 60598-2-2:1996 |
|
|
Luminaires — Part 2: Particular requirements — Section 2: Recessed luminaires (IEC 60598-2-2:1996) |
EN 60598-2-2:1989 + A2:1996 Note 2.1 |
Date expired (1.4.2002) |
|
Amendment A1:1997 to EN 60598-2-2:1996 (IEC 60598-2-2:1996/A1:1997) |
Note 3 |
Date expired (1.12.2002) |
|
Cenelec |
EN 60598-2-3:1994 |
|
|
Luminaires — Part 2-3: Particular requirements — Luminaires for road and street lighting (IEC 60598-2-3:1993) |
None |
— |
|
Amendment A1:1997 to EN 60598-2-3:1994 (IEC 60598-2-3:1993/A1:1997) |
Note 3 |
Date expired (1.1.2003) |
|
Amendment A2:2001 to EN 60598-2-3:1994 (IEC 60598-2-3:1993/A2:2000) |
Note 3 |
Date expired (1.12.2007) |
|
Cenelec |
EN 60598-2-3:2003 |
|
|
Luminaires — Part 2-3: Particular requirements — Luminaires for road and street lighting (IEC 60598-2-3:2002) |
EN 60598-2-3:1994 and its amendments Note 2.1 |
1.2.2010 |
|
Cenelec |
EN 60598-2-4:1997 |
|
|
Luminaires — Part 2: Particular requirements — Section 4: Portable general purpose luminaires (IEC 60598-2-4:1997) |
EN 60598-2-4:1989 + A3:1993 Note 2.1 |
Date expired (1.4.2003) |
|
Cenelec |
EN 60598-2-5:1998 |
|
|
Luminaires — Part 2-5: Particular requirements — Floodlights (IEC 60598-2-5:1998) |
EN 60598-2-5:1989 + A2:1994 Note 2.1 |
Date expired (1.4.2005) |
|
Cenelec |
EN 60598-2-6:1994 |
|
|
Luminaires — Part 2: Particular requirements — Section 6: Luminaires with built-in transformers or convertors for filament lamps (IEC 60598-2-6:1994) |
EN 60598-2-6:1989 + A2:1991 Note 2.1 |
Date expired (1.7.2000) |
|
Amendment A1:1997 to EN 60598-2-6:1994 (IEC 60598-2-6:1994/A1:1996) |
Note 3 |
Date expired (1.9.2002) |
|
Cenelec |
EN 60598-2-7:1989 |
|
|
Luminaires — Part 2: Particular requirements — Section 7: Portable luminaires for garden use (IEC 60598-2-7:1982 (Modified) + A1:1987 (Modified)) |
None |
— |
|
Amendment A13:1997 to EN 60598-2-7:1989 |
Note 3 |
— |
|
Amendment A2:1996 to EN 60598-2-7:1989 (IEC 60598-2-7:1982/A2:1994 (Modified)) |
Note 3 |
Date expired (1.3.2002) |
|
Cenelec |
EN 60598-2-8:1997 |
|
|
Luminaires — Part 2-8: Particular requirements — Handlamps (IEC 60598-2-8:1996 (Modified)) |
EN 60598-2-8:1989 + A2:1993 Note 2.1 |
Date expired (1.3.2003) |
|
Amendment A1:2000 to EN 60598-2-8:1997 (IEC 60598-2-8:1996/A1:2000) |
Note 3 |
Date expired (1.5.2003) |
|
Amendment A2:2008 to EN 60598-2-8:1997 (IEC 60598-2-8:1996/A2:2007) |
Note 3 |
1.2.2011 |
|
Cenelec |
EN 60598-2-9:1989 |
|
|
Luminaires — Part 2: Particular requirements — Section 9: Photo and film luminaires (non-professional) (IEC 60598-2-9:1987) |
None |
— |
|
Amendment A1:1994 to EN 60598-2-9:1989 (IEC 60598-2-9:1987/A1:1993) |
Note 3 |
Date expired (1.4.2000) |
|
Cenelec |
EN 60598-2-10:2003 |
|
|
Luminaires — Part 2-10: Particular requirements — Portable luminaires for children (IEC 60598-2-10:2003) |
None |
— |
|
Cenelec |
EN 60598-2-11:2005 |
|
|
Luminaires — Part 2-11: Particular requirements — Aquarium luminaires (IEC 60598-2-11:2005) |
None |
— |
|
Cenelec |
EN 60598-2-12:2006 |
|
|
Luminaires — Part 2-12: Particular requirements — Mains socket-outlet mounted nightlights (IEC 60598-2-12:2006) |
None |
— |
|
Cenelec |
EN 60598-2-13:2006 |
|
|
Luminaires — Part 2-13: Particular requirements — Ground recessed luminaires (IEC 60598-2-13:2006) |
None |
— |
|
Cenelec |
EN 60598-2-17:1989 |
|
|
Luminaires — Part 2: Particular requirements — Section 17: Luminaires for stage lighting, television film and photographic studios (outdoor and indoor) (IEC 60598-2-17:1984 + A1:1987) |
None |
— |
|
Amendment A2:1991 to EN 60598-2-17:1989 (IEC 60598-2-17:1984/A2:1990) |
Note 3 |
Date expired (1.11.1997) |
|
Cenelec |
EN 60598-2-19:1989 |
|
|
Luminaires — Part 2: Particular requirements — Section 19: Air-handling luminaires (safety requirements) (IEC 60598-2-19:1981 (Modified) + A1:1987 (Modified)) |
None |
— |
|
Amendment A2:1998 to EN 60598-2-19:1989 (IEC 60598-2-19:1981/A2:1997) |
Note 3 |
Date expired (1.10.1998) |
|
Cenelec |
EN 60598-2-20:1997 |
|
|
Luminaires — Part 2-20: Particular requirements — Lighting chains (IEC 60598-2-20:1996 (Modified)) |
EN 60598-2-20:1991 + A11:1992 Note 2.1 |
Date expired (1.4.2003) |
|
Amendment A1:1998 to EN 60598-2-20:1997 (IEC 60598-2-20:1996/A1:1998 (Modified)) |
Note 3 |
Date expired (1.4.2005) |
|
Amendment A2:2004 to EN 60598-2-20:1997 (IEC 60598-2-20:1996/A2:2002 (Modified)) |
Note 3 |
Date expired (1.2.2006) |
|
Cenelec |
EN 60598-2-22:1998 |
|
|
Luminaires — Part 2-22: Particular requirements — Luminaires for emergency lighting (IEC 60598-2-22:1997 (Modified)) |
EN 60598-2-22:1990 Note 2.1 |
Date expired (1.3.2008) |
|
Amendment A1:2003 to EN 60598-2-22:1998 (IEC 60598-2-22:1997/A1:2002) |
Note 3 |
1.10.2009 |
|
Cenelec |
EN 60598-2-23:1996 |
|
|
Luminaires — Part 2-23: Particular requirements — Extra low-voltage lighting systems for filament lamps (IEC 60598-2-23:1996) |
None |
— |
|
Amendment A1:2000 to EN 60598-2-23:1996 (IEC 60598-2-23:1996/A1:2000) |
Note 3 |
Date expired (1.8.2007) |
|
Cenelec |
EN 60598-2-24:1998 |
|
|
Luminaires — Part 2: Particular requirements — Section 24: Luminaires with limited surface temperatures (IEC 60598-2-24:1997 (Modified)) |
None |
— |
|
Cenelec |
EN 60598-2-25:1994 |
|
|
Luminaires — Part 2-25: Particular requirements — Luminaires for use in clinical areas of hospitals and health care buildings (IEC 60598-2-25:1994) |
None |
— |
|
Amendment A1:2004 to EN 60598-2-25:1994 (IEC 60598-2-25:1994/A1:2004) |
Note 3 |
1.11.2011 |
|
Cenelec |
EN 60618:1997 |
|
|
Inductive voltage dividers (IEC 60618:1978 + A1:1981) |
None |
— |
|
Amendment A2:1997 to EN 60618:1997 (IEC 60618:1978/A2:1997) |
Note 3 |
Date expired (1.9.1998) |
|
Cenelec |
EN 60645-1:2001 |
|
|
Electroacoustics — Audiological equipment — Part 1: Pure-tone audiometers (IEC 60645-1:2001) |
EN 60645-1:1994 Note 2.1 |
Date expired (1.10.2004) |
|
Cenelec |
EN 60645-3:1995 |
|
|
Audiometers — Part 3: Auditory test signals of short duration for audiometric and neuro-otological purposes (IEC 60645-3:1994) |
None |
— |
|
Cenelec |
EN 60645-3:2007 |
|
|
Electroacoustics — Audiometric equipment — Part 3: Test signals of short duration (IEC 60645-3:2007) |
EN 60645-3:1995 Note 2.1 |
1.6.2010 |
|
Cenelec |
EN 60645-4:1995 |
|
|
Audiometers — Part 4: Equipment for extended high-frequency audiometry (IEC 60645-4:1994) |
None |
— |
|
Cenelec |
EN 60662:1993 |
|
|
High-pressure sodium vapour lamps (IEC 60662:1980 (Modified) + A1:1986 (Modified) + A2:1987 (Modified) + A3:1990 (Modified)) |
None |
— |
|
Amendment A4:1994 to EN 60662:1993 (IEC 60662:1980/A4:1992) |
Note 3 |
Date expired (15.3.2000) |
|
Amendment A5:1994 to EN 60662:1993 (IEC 60662:1980/A5:1993) |
Note 3 |
Date expired (15.7.2000) |
|
Amendment A6:1994 to EN 60662:1993 (IEC 60662:1980/A6:1994) |
Note 3 |
Date expired (15.7.2000) |
|
Amendment A7:1995 to EN 60662:1993 (IEC 60662:1980/A7:1995) |
Note 3 |
Date expired (1.9.2001) |
|
Amendment A9:1997 to EN 60662:1993 (IEC 60662:1980/A9:1997) |
Note 3 |
Date expired (1.4.2003) |
|
Amendment A10:1997 to EN 60662:1993 (IEC 60662:1980/A10:1997) |
Note 3 |
Date expired (1.7.2003) |
|
Cenelec |
EN 60664-1:2003 |
|
|
Insulation coordination for equipment within low-voltage systems — Part 1: Principles, requirements and tests (IEC 60664-1:1992 + A1:2000 + A2:2002) |
HD 625.1 S1:1996 Note 2.1 |
Date expired (1.4.2006) |
|
Cenelec |
EN 60664-1:2007 |
|
|
Insulation coordination for equipment within low-voltage systems — Part 1: Principles, requirements and tests (IEC 60664-1:2007) |
EN 60664-1:2003 Note 2.1 |
1.7.2010 |
|
Cenelec |
EN 60664-3:2003 |
|
|
Insulation coordination for equipment within low-voltage systems — Part 3: Use of coating, potting or moulding for protection against pollution (IEC 60664-3:2003) |
HD 625.3 S1:1997 Note 2.1 |
Date expired (1.4.2006) |
|
Cenelec |
EN 60664-4:2006 |
|
|
Insulation coordination for equipment within low-voltage systems — Part 4: Consideration of high-frequency voltage stress (IEC 60664-4:2005) |
None |
— |
|
Cenelec |
EN 60664-5:2003 |
|
|
Insulation coordination for equipment within low-voltage systems — Part 5: A comprehensive method for determining clearances and creepage distances equal to or less than 2 mm (IEC 60664-5:2003) |
None |
— |
|
Cenelec |
EN 60664-5:2007 |
|
|
Insulation coordination for equipment within low-voltage systems — Part 5: Comprehensive method for determining clearances and creepage distances equal to or less than 2 mm (IEC 60664-5:2007) |
EN 60664-5:2003 Note 2.1 |
1.10.2010 |
|
Cenelec |
EN 60669-1:1999 |
|
|
Switches for household and similar fixed-electrical installations — Part 1: General requirements (IEC 60669-1:1998 (Modified)) |
EN 60669-1:1995 + A2:1996 Note 2.1 |
1.9.2009 |
|
Amendment A1:2002 to EN 60669-1:1999 (IEC 60669-1:1998/A1:1999 (Modified)) |
Note 3 |
1.9.2009 |
|
Cenelec |
EN 60669-2-1:2000 |
|
|
Switches for household and similar fixed electrical installations — Part 2-1: Particular requirements — Electronic switches (IEC 60669-2-1:1996 (Modified) + A1:1997 (Modified)) |
EN 60669-2-1:1996 + A11:1997 Note 2.1 |
Date expired (1.10.2005) |
|
Amendment A2:2001 to EN 60669-2-1:2000 (IEC 60669-2-1:1996/A2:1999 (Modified)) |
Note 3 |
Date expired (1.10.2005) |
|
Cenelec |
EN 60669-2-1:2004 |
|
|
Switches for household and similar fixed electrical installations — Part 2-1: Particular requirements — Electronic switches (IEC 60669-2-1:2002 (Modified)) |
EN 60669-2-1:2000 and its amendment Note 2.1 |
1.7.2009 |
|
Cenelec |
EN 60669-2-2:1997 |
|
|
Switches for household and similar fixed electrical installations — Part 2: Particular requirements — Section 2: Electromagnetic remote-control switches (RCS) (IEC 60669-2-2:1996) |
EN 60669-2-2:1996 Note 2.1 |
Date expired (1.6.1999) |
|
Amendment A1:1997 to EN 60669-2-2:1997 (IEC 60669-2-2:1996/A1:1997) |
Note 3 |
Date expired (1.6.2004) |
|
Cenelec |
EN 60669-2-2:2006 |
|
|
Switches for household and similar fixed electrical installations — Part 2-2: Particular requirements — Electromagnetic remote-control switches (RCS) (IEC 60669-2-2:2006) |
EN 60669-2-2:1997 and its amendment Note 2.1 |
1.9.2009 |
|
Cenelec |
EN 60669-2-3:1997 |
|
|
Switches for household and similar fixed electrical installations — Part 2-3: Particular requirements — Time-delay switches (TDS) (IEC 60669-2-3:1997) |
EN 60669-2-3:1996 Note 2.1 |
Date expired (1.6.1999) |
|
Cenelec |
EN 60669-2-3:2006 |
|
|
Switches for household and similar fixed electrical installations — Part 2-3: Particular requirements — Time-delay switches (TDS) (IEC 60669-2-3:2006) |
EN 60669-2-3:1997 Note 2.1 |
1.9.2009 |
|
Cenelec |
EN 60669-2-4:2005 |
|
|
Switches for household and similar fixed electrical installations — Part 2-4: Particular requirements — Isolating switches (IEC 60669-2-4:2004 (Modified)) |
None |
— |
|
Cenelec |
EN 60670-1:2005 |
|
|
Boxes and enclosures for electrical accessories for household and similar fixed electrical installations — Part 1: General requirements (IEC 60670-1:2002 (Modified)) |
None |
— |
|
Cenelec |
EN 60670-21:2007 |
|
|
Boxes and enclosures for electrical accessories for household and similar fixed electrical installations — Part 21: Particular requirements for boxes and enclosures with provision for suspension means (IEC 60670-21:2004 (Modified)) |
None |
— |
|
Cenelec |
EN 60670-22:2006 |
|
|
Boxes and enclosures for electrical accessories for household and similar fixed electrical installations — Part 22: Particular requirements for connecting boxes and enclosures (IEC 60670-22:2003 (Modified)) |
None |
— |
|
Cenelec |
EN 60691:2003 |
|
|
Thermal-links — Requirements and application guide (IEC 60691:2002) |
EN 60691:1995 + A2:2000 Note 2.1 |
Date expired (1.12.2005) |
|
Amendment A1:2007 to EN 60691:2003 (IEC 60691:2002/A1:2006) |
Note 3 |
1.12.2009 |
|
Cenelec |
EN 60695-1-1:2000 |
|
|
Fire hazard testing — Part 1-1: Guidance for assessing the fire hazard of electrotechnical products — General guidelines (IEC 60695-1-1:1999) |
EN 60695-1-1:1995 Note 2.1 |
Date expired (1.1.2003) |
|
Cenelec |
EN 60695-2-10:2001 |
|
|
Fire hazard testing — Part 2-10: Glowing/hot-wire based test methods — Glow-wire apparatus and common test procedure (IEC 60695-2-10:2000) |
EN 60695-2-1/0:1996 Note 2.1 |
Date expired (1.11.2003) |
|
Cenelec |
EN 60695-2-11:2001 |
|
|
Fire hazard testing — Part 2-11: Glowing/hot-wire based test methods — Glow-wire flammability test method for end-products (IEC 60695-2-11:2000) |
EN 60695-2-1/1:1996 Note 2.1 |
Date expired (1.11.2003) |
|
Cenelec |
EN 60695-2-12:2001 |
|
|
Fire hazard testing — Part 2-12: Glowing/hot-wire based test methods — Glow-wire flammability test method for materials (IEC 60695-2-12:2000) |
EN 60695-2-1/2:1996 Note 2.1 |
Date expired (1.11.2003) |
|
Cenelec |
EN 60695-2-13:2001 |
|
|
Fire hazard testing — Part 2-13: Glowing/hot-wire based test methods — Glow-wire ignitability test method for materials (IEC 60695-2-13:2000) |
EN 60695-2-1/3:1996 Note 2.1 |
Date expired (1.11.2003) |
|
Cenelec |
EN 60695-10-2:2003 |
|
|
Fire hazard testing — Part 10-2: Abnormal heat — Ball pressure test (IEC 60695-10-2:2003) |
None |
— |
|
Cenelec |
EN 60695-10-3:2002 |
|
|
Fire hazard testing — Part 10-3: Abnormal heat — Mould stress relief distortion test (IEC 60695-10-3:2002) |
None |
— |
|
Cenelec |
EN 60695-11-2:2003 |
|
|
Fire hazard testing — Part 11-2: Test flames — 1 kW nominal pre-mixed flame — Apparatus, confirmatory test arrangement and guidance (IEC 60695-11-2:2003) |
EN 60695-2-4/1:1993 + A1:1996 Note 2.1 |
Date expired (1.10.2006) |
|
Cenelec |
EN 60695-11-5:2005 |
|
|
Fire hazard testing — Part 11-5: Test flames — Needle-flame test method — Apparatus, confirmatory test arrangement and guidance (IEC 60695-11-5:2004) |
EN 60695-2-2:1994 + A1:1995 Note 2.1 |
Date expired (1.2.2008) |
|
Cenelec |
EN 60695-11-10:1999 |
|
|
Fire hazard testing — Part 11-10: Test flames — 50 W horizontal and vertical flame test methods (IEC 60695-11-10:1999) |
None |
— |
|
Amendment A1:2003 to EN 60695-11-10:1999 (IEC 60695-11-10:1999/A1:2003) |
Note 3 |
Date expired (1.9.2006) |
|
Cenelec |
EN 60695-11-20:1999 |
|
|
Fire hazard testing — Part 11-20: Test flames — 500 W flame test methods (IEC 60695-11-20:1999) |
None |
— |
|
Amendment A1:2003 to EN 60695-11-20:1999 (IEC 60695-11-20:1999/A1:2003) |
Note 3 |
Date expired (1.9.2006) |
|
Cenelec |
EN 60702-1:2002 |
|
|
Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V — Part 1: Cables (IEC 60702-1:2002) |
HD 586.1 S1:1994 Note 2.1 |
Date expired (1.3.2005) |
|
Cenelec |
EN 60702-2:2002 |
|
|
Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V — Part 2: Terminations (IEC 60702-2:2002) |
HD 586.2 S1:1994 Note 2.1 |
Date expired (1.3.2005) |
|
Cenelec |
EN 60715:2001 |
|
|
Dimensions of low-voltage switchgear and controlgear — Standardized mounting on rails for mechanical support of electrical devices in switchgear and controlgear installations (IEC 60715:1981 + A1:1995) |
None |
— |
|
Cenelec |
EN 60719:1993 |
|
|
Calculation of the lower and upper limits for the average outer dimensions of cables with circular copper conductors and of rated voltages up to and including 450/750 V (IEC 60719:1992) |
None |
— |
|
Cenelec |
EN 60728-11:2005 |
|
|
Cable networks for television signals, sound signals and interactive services — Part 11: Safety (IEC 60728-11:2005 (Modified)) |
EN 50083-1:1993 + A2:1997 Note 2.1 |
Date expired (1.4.2008) |
|
Cenelec |
EN 60730-1:1991 |
|
|
Automatic electrical controls for household and similar use — Part 1: General requirements (IEC 60730-1:1986 (Modified)) |
None |
— |
|
Amendment A14:1995 to EN 60730-1:1991 |
Note 3 |
— |
|
Amendment A1:1991 to EN 60730-1:1991 (IEC 60730-1:1986/A1:1990) |
Note 3 |
Date expired (1.7.1995) |
|
Amendment A11:1991 to EN 60730-1:1991 |
Note 3 |
Date expired (1.7.1995) |
|
Amendment A12:1993 to EN 60730-1:1991 |
Note 3 |
Date expired (1.7.1995) |
|
Cenelec |
EN 60730-1:1995 |
|
|
Automatic electrical controls for household and similar use — Part 1: General requirements (IEC 60730-1:1993 (Modified)) |
EN 60730-1:1991 and its amendments Note 2.1 |
— |
|
Amendment A1:1997 to EN 60730-1:1995 (IEC 60730-1:1993/A1:1994 (Modified)) |
Note 3 |
— |
|
Amendment A2:1998 to EN 60730-1:1995 (IEC 60730-1:1993/A2:1997) |
Note 3 |
— |
|
Amendment A14:1998 to EN 60730-1:1995 |
Note 3 |
— |
|
Amendment A15:1998 to EN 60730-1:1995 |
Note 3 |
— |
|
Amendment A12:1996 to EN 60730-1:1995 |
Note 3 |
Date expired (1.12.1996) |
|
Amendment A11:1996 to EN 60730-1:1995 |
Note 3 |
Date expired (1.1.1998) |
|
Amendment A16:1999 to EN 60730-1:1995 |
Note 3 |
Date expired (1.10.2000) |
|
Amendment A17:2000 to EN 60730-1:1995 |
EN 60730-1:1995/A13:1998 Note 3 |
Date expired (1.10.2002) |
|
Amendment A18:2003 to EN 60730-1:1995 |
Note 3 |
1.6.2010 |
|
Cenelec |
EN 60730-1:2000 |
|
|
Automatic electrical controls for household and similar use — Part 1: General requirements (IEC 60730-1:1999 (Modified)) |
EN 60730-1:1995 and its amendments Note 2.1 |
— |
|
Amendment A1:2004 to EN 60730-1:2000 (IEC 60730-1:1999/A1:2003 (Modified)) |
EN 60730-1:2000/A11:2002 Note 3 |
— |
|
Amendment A13:2004 to EN 60730-1:2000 |
Note 3 |
Date expired (1.9.2007) |
|
Amendment A12:2003 to EN 60730-1:2000 |
Note 3 |
1.6.2010 |
|
Amendment A14:2005 to EN 60730-1:2000 |
Note 3 |
1.6.2010 |
|
Amendment A15:2007 to EN 60730-1:2000 |
Note 3 |
1.6.2010 |
|
Cenelec |
EN 60730-2-1:1997 |
|
|
Automatic electrical controls for household and similar use — Part 2-1: Particular requirements for electrical controls for electrical household appliances (IEC 60730-2-1:1989 (Modified)) |
EN 60730-2-1:1991 + A11:1992 + A12:1993 + A13:1995 Note 2.1 |
Date expired (1.4.2004) |
|
Amendment A11:2005 to EN 60730-2-1:1997 |
Note 3 |
1.3.2009 |
|
Cenelec |
EN 60730-2-2:1991 |
|
|
Automatic electrical controls for household and similar use — Part 2: Particular requirements for thermal motor protectors (IEC 60730-2-2:1990 (Modified)) |
None |
— |
|
Amendment A11:1995 to EN 60730-2-2:1991 |
Note 3 |
Date expired (1.3.1996) |
|
Amendment A1:1997 to EN 60730-2-2:1991 (IEC 60730-2-2:1990/A1:1995) |
Note 3 |
Date expired (1.9.2002) |
|
Amendment A2:1997 to EN 60730-2-2:1991 (IEC 60730-2-2:1990/A2:1997) |
Note 3 |
Date expired (1.4.2004) |
|
Cenelec |
EN 60730-2-2:2002 |
|
|
Automatic electrical controls for household and similar use — Part 2-2: Particular requirements for thermal motor protectors (IEC 60730-2-2:2001 (Modified)) |
EN 60730-2-2:1991 and its amendments Note 2.1 |
1.3.2009 |
|
Amendment A1:2006 to EN 60730-2-2:2002 (IEC 60730-2-2:2001/A1:2005 (Modified)) |
Note 3 |
1.3.2009 |
|
Amendment A11:2005 to EN 60730-2-2:2002 |
Note 3 |
1.3.2009 |
|
Cenelec |
EN 60730-2-3:1992 |
|
|
Automatic electrical controls for household and similar use — Part 2-3: Particular requirements for thermal protectors for ballasts for tubular fluorescent lamps (IEC 60730-2-3:1990 (Modified)) |
None |
— |
|
Amendment A1:1998 to EN 60730-2-3:1992 (IEC 60730-2-3:1990/A1:1995 (Modified)) |
Note 3 |
Date expired (1.1.2004) |
|
Amendment A2:2001 to EN 60730-2-3:1992 (IEC 60730-2-3:1990/A2:2001) |
Note 3 |
Date expired (1.7.2008) |
|
Amendment A11:2005 to EN 60730-2-3:1992 |
Note 3 |
Date expired (1.7.2008) |
|
Cenelec |
EN 60730-2-3:2007 |
|
|
Automatic electrical controls for household and similar use — Part 2-3: Particular requirements for thermal protectors for ballasts for tubular fluorescent lamps (IEC 60730-2-3:2006 (Modified)) |
EN 60730-2-3:1992 and its amendments Note 2.1 |
1.9.2010 |
|
Cenelec |
EN 60730-2-4:1993 |
|
|
Automatic electrical controls for household and similar use — Part 2-4: Particular requirements for thermal motor protectors for motor-compressors of hermetic and semi-hermetic type (IEC 60730-2-4:1990 (Modified)) |
None |
— |
|
Amendment A1:1998 to EN 60730-2-4:1993 (IEC 60730-2-4:1990/A1:1994) |
Note 3 |
Date expired (1.1.2004) |
|
Amendment A2:2002 to EN 60730-2-4:1993 (IEC 60730-2-4:1990/A2:2001 (Modified)) |
Note 3 |
1.10.2009 |
|
Cenelec |
EN 60730-2-4:2007 |
|
|
Automatic electrical controls for household and similar use — Part 2-4: Particular requirements for thermal motor protectors for motor-compressors of hermetic and semi-hermetic type (IEC 60730-2-4:2006 (Modified)) |
EN 60730-2-4:1993 and its amendments Note 2.1 |
1.9.2010 |
|
Cenelec |
EN 60730-2-5:1995 |
|
|
Automatic electrical controls for household and similar use — Part 2: Particular requirements for automatic electrical burner control systems (IEC 60730-2-5:1993 (Modified)) |
None |
— |
|
Amendment A1:1996 to EN 60730-2-5:1995 (IEC 60730-2-5:1993/A1:1996) |
Note 3 |
Date expired (15.12.2000) |
|
Amendment A2:1998 to EN 60730-2-5:1995 (IEC 60730-2-5:1993/A2:1997) |
Note 3 |
Date expired (15.12.2000) |
|
Cenelec |
EN 60730-2-5:2002 |
|
|
Automatic electrical controls for household and similar use — Part 2-5: Particular requirements for automatic electrical burner control systems (IEC 60730-2-5:2000 (Modified)) |
EN 60730-2-5:1995 and its amendments Note 2.1 |
1.12.2008 |
|
Amendment A1:2004 to EN 60730-2-5:2002 (IEC 60730-2-5:2000/A1:2004 (Modified)) |
Note 3 |
1.12.2008 |
|
Amendment A11:2005 to EN 60730-2-5:2002 |
Note 3 |
1.12.2008 |
|
Cenelec |
EN 60730-2-6:1995 |
|
|
Automatic electrical controls for household and similar use — Part 2: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements (IEC 60730-2-6:1991 (Modified)) |
None |
— |
|
Amendment A1:1997 to EN 60730-2-6:1995 (IEC 60730-2-6:1991/A1:1994 (Modified)) |
Note 3 |
Date expired (15.12.2003) |
|
Amendment A2:1998 to EN 60730-2-6:1995 (IEC 60730-2-6:1991/A2:1997) |
Note 3 |
Date expired (1.1.2004) |
|
Cenelec |
EN 60730-2-7:1991 |
|
|
Automatic electrical controls for household and similar use — Part 2: Particular requirements for timers and time switches (IEC 60730-2-7:1990 (Modified)) |
None |
— |
|
Amendment A1:1997 to EN 60730-2-7:1991 (IEC 60730-2-7:1990/A1:1994 (Modified)) |
Note 3 |
Date expired (1.1.2004) |
|
Amendment A11:1994 to EN 60730-2-7:1991 |
Note 3 |
Date expired (1.1.2004) |
|
Amendment A12:1993 to EN 60730-2-7:1991 |
Note 3 |
Date expired (1.1.2004) |
|
Amendment A13:2003 to EN 60730-2-7:1991 |
Note 3 |
Date expired (1.3.2006) |
|
Amendment A14:2003 to EN 60730-2-7:1991 |
Note 3 |
1.6.2010 |
|
Cenelec |
EN 60730-2-8:1995 |
|
|
Automatic electrical controls for household and similar use — Part 2: Particular requirements for electrically operated water valves, including mechanical requirements (IEC 60730-2-8:1992 (Modified)) |
None |
— |
|
Amendment A1:1997 to EN 60730-2-8:1995 (IEC 60730-2-8:1992/A1:1994 (Modified)) |
Note 3 |
Date expired (1.1.2004) |
|
Amendment A2:1997 to EN 60730-2-8:1995 (IEC 60730-2-8:1992/A2:1997) |
Note 3 |
Date expired (1.1.2004) |
|
Cenelec |
EN 60730-2-8:2002 |
|
|
Automatic electrical controls for household and similar use — Part 2-8: Particular requirements for electrically operated water valves, including mechanical requirements (IEC 60730-2-8:2000 (Modified)) |
EN 60730-2-8:1995 and its amendments Note 2.1 |
1.12.2008 |
|
Amendment A1:2003 to EN 60730-2-8:2002 (IEC 60730-2-8:2000/A1:2002 (Modified)) |
Note 3 |
1.12.2008 |
|
Cenelec |
EN 60730-2-9:1995 |
|
|
Automatic electrical controls for household and similar use — Part 2: Particular requirements for temperature sensing controls (IEC 60730-2-9:1992 (Modified)) |
None |
— |
|
Amendment A1:1996 to EN 60730-2-9:1995 (IEC 60730-2-9:1992/A1:1994 (Modified)) |
Note 3 |
Date expired (1.1.2004) |
|
Amendment A2:1997 to EN 60730-2-9:1995 (IEC 60730-2-9:1992/A2:1994 (Modified)) |
Note 3 |
Date expired (1.1.2004) |
|
Amendment A11:1997 to EN 60730-2-9:1995 |
Note 3 |
Date expired (1.1.2004) |
|
Amendment A12:2001 to EN 60730-2-9:1995 |
Note 3 |
Date expired (1.1.2004) |
|
Amendment A13:2004 to EN 60730-2-9:1995 |
Note 3 |
Date expired (1.9.2007) |
|
Cenelec |
EN 60730-2-9:2002 |
|
|
Automatic electrical controls for household and similar use — Part 2-9: Particular requirements for temperature sensing controls (IEC 60730-2-9:2000 (Modified)) |
EN 60730-2-9:1995 and its amendments Note 2.1 |
1.12.2008 |
|
Amendment A12:2004 to EN 60730-2-9:2002 |
Note 3 |
Date expired (1.9.2007) |
|
Amendment A2:2005 to EN 60730-2-9:2002 (IEC 60730-2-9:2000/A2:2004 (Modified)) |
Note 3 |
Date expired (1.12.2007) |
|
Amendment A1:2003 to EN 60730-2-9:2002 (IEC 60730-2-9:2000/A1:2002 (Modified)) |
Note 3 |
1.12.2008 |
|
Amendment A11:2003 to EN 60730-2-9:2002 |
Note 3 |
1.12.2008 |
|
Cenelec |
EN 60730-2-10:1995 |
|
|
Automatic electrical controls for household and similar use — Part 2-10: Particular requirements for motor starting relays (IEC 60730-2-10:1991 (Modified)) |
None |
— |
|
Amendment A1:1996 to EN 60730-2-10:1995 (IEC 60730-2-10:1991/A1:1994) |
Note 3 |
Date expired (1.1.2004) |
|
Amendment A2:2002 to EN 60730-2-10:1995 (IEC 60730-2-10:1991/A2:2001 (Modified)) |
Note 3 |
1.9.2009 |
|
Cenelec |
EN 60730-2-10:2007 |
|
|
Automatic electrical controls for household and similar use — Part 2-10: Particular requirements for motor-starting relays (IEC 60730-2-10:2006) |
EN 60730-2-10:1995 and its amendments Note 2.1 |
1.9.2010 |
|
Cenelec |
EN 60730-2-11:1993 |
|
|
Automatic electrical controls for household and similar use — Part 2-11: Particular requirements for energy regulators (IEC 60730-2-11:1993) |
None |
— |
|
Amendment A1:1997 to EN 60730-2-11:1993 (IEC 60730-2-11:1993/A1:1994 (Modified)) |
Note 3 |
Date expired (1.7.2000) |
|
Amendment A2:1998 to EN 60730-2-11:1993 (IEC 60730-2-11:1993/A2:1997) |
Note 3 |
Date expired (1.3.2004) |
|
Amendment A11:2005 to EN 60730-2-11:1993 |
Note 3 |
1.3.2009 |
|
Cenelec |
EN 60730-2-11:2008 |
|
|
Automatic electrical controls for household and similar use — Part 2-11: Particular requirements for energy regulators (IEC 60730-2-11:2006) |
EN 60730-2-11:1993 and its amendments Note 2.1 |
1.10.2010 |
|
Cenelec |
EN 60730-2-12:1993 |
|
|
Automatic electrical controls for household and similar use — Part 2-12: Particular requirements for electrically operated door locks (IEC 60730-2-12:1993) |
None |
— |
|
Amendment A1:1997 to EN 60730-2-12:1993 (IEC 60730-2-12:1993/A1:1995 (Modified)) |
Note 3 |
Date expired (1.6.2005) |
|
Amendment A11:2005 to EN 60730-2-12:1993 |
Note 3 |
Date expired (1.12.2005) |
|
Cenelec |
EN 60730-2-12:2006 |
|
|
Automatic electrical controls for household and similar use — Part 2-12: Particular requirements for electrically operated door locks (IEC 60730-2-12:2005 (Modified)) |
EN 60730-2-12:1993 and its amendments Note 2.1 |
1.10.2008 |
|
Cenelec |
EN 60730-2-13:1998 |
|
|
Automatic electrical controls for household and similar use — Part 2-13: Particular requirements for humidity sensing controls (IEC 60730-2-13:1995 (Modified)) |
None |
— |
|
Amendment A1:1998 to EN 60730-2-13:1998 (IEC 60730-2-13:1995/A1:1997) |
Note 3 |
Date expired (1.8.2003) |
|
Amendment A2:2002 to EN 60730-2-13:1998 (IEC 60730-2-13:1995/A2:2000 (Modified)) |
Note 3 |
1.2.2009 |
|
Amendment A11:2005 to EN 60730-2-13:1998 |
Note 3 |
1.2.2009 |
|
Cenelec |
EN 60730-2-13:2008 |
|
|
Automatic electrical controls for household and similar use — Part 2-13: Particular requirements for humidity sensing controls (IEC 60730-2-13:2006 (Modified)) |
EN 60730-2-13:1998 and its amendments Note 2.1 |
1.10.2010 |
|
Cenelec |
EN 60730-2-14:1997 |
|
|
Automatic electrical controls for household and similar use — Part 2-14: Particular requirements for electric actuators (IEC 60730-2-14:1995 (Modified)) |
None |
— |
|
Amendment A1:2001 to EN 60730-2-14:1997 (IEC 60730-2-14:1995/A1:2001) |
Note 3 |
Date expired (1.7.2008) |
|
Amendment A11:2005 to EN 60730-2-14:1997 |
Note 3 |
Date expired (1.7.2008) |
|
Cenelec |
EN 60730-2-15:1995 |
|
|
Automatic electrical controls for household and similar use — Part 2-15: Particular requirements for automatic electrical water level sensing controls of the float or electrode-sensor type used in boiler applications (IEC 60730-2-15:1994) |
None |
— |
|
Amendment A1:1998 to EN 60730-2-15:1995 (IEC 60730-2-15:1994/A1:1997) |
Note 3 |
Date expired (1.1.2004) |
|
Amendment A11:2005 to EN 60730-2-15:1995 |
Note 3 |
1.3.2009 |
|
Cenelec |
EN 60730-2-16:1997 |
|
|
Automatic electrical controls for household and similar use — Part 2-16: Particular requirements for automatic electrical water level controls of the float type for household and similar applications (IEC 60730-2-16:1995 (Modified)) |
None |
— |
|
Amendment A1:1998 to EN 60730-2-16:1997 (IEC 60730-2-16:1995/A1:1997) |
Note 3 |
Date expired (1.6.2004) |
|
Amendment A2:2001 to EN 60730-2-16:1997 (IEC 60730-2-16:1995/A2:2001) |
Note 3 |
Date expired (1.7.2008) |
|
Amendment A11:2005 to EN 60730-2-16:1997 |
Note 3 |
Date expired (1.7.2008) |
|
Cenelec |
EN 60730-2-18:1999 |
|
|
Automatic electrical controls for household and similar use — Part 2-18: Particular requirements for automatic electrical water and air flow sensing controls, including mechanical requirements (IEC 60730-2-18:1997 (Modified)) |
None |
— |
|
Amendment A11:2005 to EN 60730-2-18:1999 |
Note 3 |
1.3.2009 |
|
Cenelec |
EN 60730-2-19:2002 |
|
|
Automatic electrical controls for household and similar use — Part 2-19: Particular requirements for electrically operated oil valves, including mechanical requirements (IEC 60730-2-19:1997 (Modified) + A1:2000 (Modified)) |
None |
— |
|
Amendment A11:2005 to EN 60730-2-19:2002 |
Note 3 |
1.10.2008 |
|
Amendment A2:2008 to EN 60730-2-19:2002 (IEC 60730-2-19:1997/A2:2007) |
Note 3 |
1.2.2011 |
|
Cenelec |
EN 60799:1998 |
|
|
Electrical accessories — Cord sets and interconnection cord sets (IEC 60799:1998) |
EN 60799:1987 + A1:1994 Note 2.1 |
Date expired (1.7.2001) |
|
Cenelec |
EN 60811-1-1:1995 |
|
|
Insulating and sheathing materials of electric and optical cables — Common test methods — Part 1-1: General application — Measurement of thickness and overall dimensions — Tests for determining the mechanical properties (IEC 60811-1-1:1993) |
HD 505.1.1 S3:1991 Note 2.1 |
Date expired (1.12.1996) |
|
Amendment A1:2001 to EN 60811-1-1:1995 (IEC 60811-1-1:1993/A1:2001) |
Note 3 |
Date expired (1.5.2004) |
|
Cenelec |
EN 60811-1-2:1995 |
|
|
Insulating and sheathing materials of electric cables — Common test methods — Part 1-2: General application — Thermal ageing methods (IEC 60811-1-2:1985 + A1:1989) |
HD 505.1.2 S2:1991 Note 2.1 |
Date expired (1.3.1996) |
|
Amendment A2:2000 to EN 60811-1-2:1995 (IEC 60811-1-2:1985/A2:2000) |
Note 3 |
Date expired (1.11.2003) |
|
Cenelec |
EN 60811-1-3:1995 |
|
|
Insulating and sheathing materials of electric and optical cables — Common test methods — Part 1-3: General application — Methods for determining the density — Water absorption tests — Shrinkage test (IEC 60811-1-3:1993) |
HD 505.1.3 S2:1991 Note 2.1 |
Date expired (1.12.1996) |
|
Amendment A1:2001 to EN 60811-1-3:1995 (IEC 60811-1-3:1993/A1:2001) |
Note 3 |
Date expired (1.7.2004) |
|
Cenelec |
EN 60811-1-4:1995 |
|
|
Insulating and sheathing materials of electric and optical cables — Common test methods — Part 1-4: General application — Tests at low temperature (IEC 60811-1-4:1985 + A1:1993) |
HD 505.1.4 S1:1988 Note 2.1 |
Date expired (1.12.1996) |
|
Amendment A2:2001 to EN 60811-1-4:1995 (IEC 60811-1-4:1985/A2:2001) |
Note 3 |
Date expired (1.9.2004) |
|
Cenelec |
EN 60811-2-1:1998 |
|
|
Insulating and sheathing materials of electric and optical cables — Common test methods — Part 2-1: Methods specific to elastomeric compounds — Ozone resistance, hot set and mineral oil immersion tests (IEC 60811-2-1:1998) |
EN 60811-2-1:1995 Note 2.1 |
Date expired (1.5.2000) |
|
Amendment A1:2001 to EN 60811-2-1:1998 (IEC 60811-2-1:1998/A1:2001) |
Note 3 |
Date expired (1.9.2004) |
|
Cenelec |
EN 60811-3-1:1995 |
|
|
Insulating and sheathing materials of electric and optical cables — Common test methods — Part 3-1: Methods specific to PVC compounds — Pressure test at high temperature — Tests for resistance to cracking (IEC 60811-3-1:1985) |
HD 505.3.1 S1:1988 Note 2.1 |
Date expired (1.3.1996) |
|
Amendment A1:1996 to EN 60811-3-1:1995 (IEC 60811-3-1:1985/A1:1994) |
Note 3 |
Date expired (1.6.1997) |
|
Amendment A2:2001 to EN 60811-3-1:1995 (IEC 60811-3-1:1985/A2:2001) |
Note 3 |
Date expired (1.7.2004) |
|
Cenelec |
EN 60811-3-2:1995 |
|
|
Insulating and sheathing materials of electric and optical cables — Common test methods — Part 3-2: Methods specific to PVC compounds — Loss of mass test — Thermal stability test (IEC 60811-3-2:1985 + A1:1993) |
HD 505.3.2 S1:1988 Note 2.1 |
Date expired (1.12.1996) |
|
Amendment A2:2004 to EN 60811-3-2:1995 (IEC 60811-3-2:1985/A2:2003) |
Note 3 |
Date expired (1.3.2007) |
|
Cenelec |
EN 60811-4-1:2004 |
|
|
Insulating and sheathing materials of electric and optical cables — Common test methods — Part 4-1: Methods specific to polyethylene and polypropylene compounds — Resistance to environmental stress cracking — Measurement of the melt flow index — Carbon black and/or mineral filler content measurement in polyethylene by direct combustion — Measurement of carbon black content by thermogravimetric analysis (TGA) — Assessment of carbon black dispersion in polyethylene using a microscope (IEC 60811-4-1:2004) |
EN 60811-4-1:1995 Note 2.1 |
Date expired (1.7.2007) |
|
Cenelec |
EN 60811-4-2:2004 |
|
|
Insulating and sheathing materials of electric and optical cables — Common test methods — Part 4-2: Methods specific to polyethylene and polypropylene compounds — Tensile strength and elongation at break after conditioning at elevated temperature — Wrapping test after conditioning at elevated temperature — Wrapping test after thermal ageing in air — Measurement of mass increase — Long-term stability test — Test method for copper-catalyzed oxidative degradation (IEC 60811-4-2:2004) |
EN 60811-4-2:1999 Note 2.1 |
Date expired (1.7.2007) |
|
Cenelec |
EN 60811-5-1:1999 |
|
|
Insulating and sheathing materials of electric and optical cables — Common test methods — Part 5-1: Methods specific to filling compounds — Drop point — Separation of oil — Lower temperature brittleness — Total acid number — Absence of corrosive components — Permittivity at 23 °C — D.C. resistivity at 23 °C and 100 °C (IEC 60811-5-1:1990 (Modified)) |
HD 505.5.1 S1:1992 Note 2.1 |
Date expired (1.4.2001) |
|
Amendment A1:2004 to EN 60811-5-1:1999 (IEC 60811-5-1:1990/A1:2003) |
Note 3 |
Date expired (1.3.2007) |
|
Cenelec |
EN 60825-1:1994 |
|
|
Safety of laser products — Part 1: Equipment classification, requirements and user's guide (IEC 60825-1:1993) |
None |
— |
|
Amendment A1:2002 to EN 60825-1:1994 (IEC 60825-1:1993/A1:1997) |
EN 60825-1:1994/A11:1996 Note 3 |
Date expired (1.1.2004) |
|
Amendment A2:2001 to EN 60825-1:1994 (IEC 60825-1:1993/A2:2001) |
Note 3 |
Date expired (1.7.2005) |
|
Cenelec |
EN 60825-1:2007 |
|
|
Safety of laser products — Part 1: Equipment classification and requirements (IEC 60825-1:2007) |
EN 60825-1:1994 and its amendments Note 2.1 |
1.9.2010 |
|
Cenelec |
EN 60825-2:2004 |
|
|
Safety of laser products — Part 2: Safety of optical fibre communication systems (OFCS) (IEC 60825-2:2004) |
EN 60825-2:2000 Note 2.1 |
Date expired (1.9.2007) |
|
Amendment A1:2007 to EN 60825-2:2004 (IEC 60825-2:2004/A1:2006) |
Note 3 |
1.2.2010 |
|
Cenelec |
EN 60825-4:1997 |
|
|
Safety of laser products — Part 4: Laser guards (IEC 60825-4:1997) |
None |
— |
|
Amendment A1:2002 to EN 60825-4:1997 (IEC 60825-4:1997/A1:2002) |
Note 3 |
Date expired (1.10.2005) |
|
Amendment A2:2003 to EN 60825-4:1997 (IEC 60825-4:1997/A2:2003) |
Note 3 |
Date expired (1.10.2006) |
|
Cenelec |
EN 60825-4:2006 |
|
|
Safety of laser products — Part 4: Laser guards (IEC 60825-4:2006) |
EN 60825-4:1997 and its amendments Note 2.1 |
1.10.2009 |
|
Cenelec |
EN 60825-12:2004 |
|
|
Safety of laser products — Part 12: Safety of free space optical communication systems used for transmission of information (IEC 60825-12:2004) |
None |
— |
|
Cenelec |
EN 60831-1:1996 |
|
|
Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1 kV — Part 1: General — Performance, testing and rating — Safety requirements — Guide for installation and operation (IEC 60831-1:1996) |
EN 60831-1:1993 Note 2.1 |
Date expired (1.8.1997) |
|
Amendment A1:2003 to EN 60831-1:1996 (IEC 60831-1:1996/A1:2002) |
Note 3 |
Date expired (1.2.2006) |
|
Cenelec |
EN 60831-2:1996 |
|
|
Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1 kV — Part 2: Ageing test, self-healing test and destruction test (IEC 60831-2:1995) |
EN 60831-2:1993 Note 2.1 |
Date expired (1.12.2001) |
|
Cenelec |
EN 60838-1:2004 |
|
|
Miscellaneous lampholders — Part 1: General requirements and tests (IEC 60838-1:2004) |
EN 60838-1:1998 + A1:1999 + A2:2002 Note 2.1 |
Date expired (1.10.2007) |
|
Cenelec |
EN 60838-2-1:1996 |
|
|
Miscellaneous lampholders — Part 2: Particular requirements — Section 1: Lampholders S14 (IEC 60838-2-1:1994) |
None |
— |
|
Amendment A1:1998 to EN 60838-2-1:1996 (IEC 60838-2-1:1994/A1:1998) |
Note 3 |
Date expired (1.8.2005) |
|
Amendment A2:2004 to EN 60838-2-1:1996 (IEC 60838-2-1:1994/A2:2004) |
Note 3 |
Date expired (1.10.2007) |
|
Cenelec |
EN 60838-2-2:2006 |
|
|
Miscellaneous lampholders — Part 2-2: Particular requirements — Connectors for LED-modules (IEC 60838-2-2:2006) |
None |
— |
|
Cenelec |
EN 60898:1991 |
|
|
Circuit-breakers for overcurrent protection for household and similar installations (IEC 60898:1987 (Modified) + A2:1990 (Modified) + A3:1990 (Modified)) |
None |
— |
|
Amendment A19:2000 to EN 60898:1991 |
Note 3 |
— |
|
Amendment A1:1991 to EN 60898:1991 (IEC 60898:1987/A1:1989) |
Note 3 |
Date expired (1.7.1994) |
|
Amendment A15:1995 to EN 60898:1991 |
Note 3 |
Date expired (1.2.1999) |
|
Amendment A16:1996 to EN 60898:1991 |
Note 3 |
Date expired (1.9.1999) |
|
Amendment A11:1994 to EN 60898:1991 |
Note 3 |
Date expired (15.7.2000) |
|
Amendment A12:1995 to EN 60898:1991 |
Note 3 |
Date expired (31.12.2000) |
|
Amendment A17:1998 to EN 60898:1991 |
Note 3 |
Date expired (1.1.2001) |
|
Amendment A13:1995 to EN 60898:1991 |
Note 3 |
Date expired (15.8.2001) |
|
Amendment A14:1995 to EN 60898:1991 |
Note 3 |
Date expired (15.8.2001) |
|
Amendment A18:1998 to EN 60898:1991 |
Note 3 |
Date expired (1.3.2003) |
|
Cenelec |
EN 60898-1:2003 |
|
|
Electrical accessories — Circuit breakers for overcurrent protection for household and similar installations — Part 1: Circuit-breakers for a.c. operation (IEC 60898-1:2002 (Modified)) |
EN 60898:1991 and its amendments Note 2.1 |
1.10.2008 |
|
Amendment A1:2004 to EN 60898-1:2003 (IEC 60898-1:2002/A1:2002 (Modified)) |
Note 3 |
1.10.2008 |
|
Amendment A11:2005 to EN 60898-1:2003 |
Note 3 |
1.5.2010 |
|
Cenelec |
EN 60898-2:2001 |
|
|
Circuit-breakers for overcurrent protection for household and similar installations — Part 2: Circuit-breakers for a.c. and d.c. operation (IEC 60898-2:2000) |
None |
— |
|
Cenelec |
EN 60898-2:2006 |
|
|
Electrical accessories — Circuit-breakers for overcurrent protection for household and similar installations — Part 2: Circuit-breakers for a.c. and d.c. operation (IEC 60898-2:2000 (Modified) + A1:2003 (Modified)) |
EN 60898-2:2001 Note 2.1 |
1.6.2010 |
|
Cenelec |
EN 60931-1:1996 |
|
|
Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1 kV — Part 1: General — Performance, testing and rating — Safety requirements — Guide for installation and operation (IEC 60931-1:1996) |
EN 60931-1:1993 Note 2.1 |
Date expired (1.8.1997) |
|
Amendment A1:2003 to EN 60931-1:1996 (IEC 60931-1:1996/A1:2002) |
Note 3 |
Date expired (1.2.2006) |
|
Cenelec |
EN 60931-2:1996 |
|
|
Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1 kV — Part 2: Ageing test and destruction test (IEC 60931-2:1995) |
EN 60931-2:1993 Note 2.1 |
Date expired (1.12.2001) |
|
Cenelec |
EN 60931-3:1996 |
|
|
Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1 kV — Part 3: Internal fuses (IEC 60931-3:1996) |
None |
— |
|
Cenelec |
EN 60934:2001 |
|
|
Circuit-breakers for equipment (CBE) (IEC 60934:2000) |
EN 60934:1994 + A1:1994 + A2:1997 + A11:1998 Note 2.1 |
Date expired (1.11.2003) |
|
Amendment A1:2007 to EN 60934:2001 (IEC 60934:2000/A1:2007) |
Note 3 |
1.2.2010 |
|
Cenelec |
EN 60947-1:2004 |
|
|
Low-voltage switchgear and controlgear — Part 1: General rules (IEC 60947-1:2004) |
EN 60947-1:1999 + A1:2000 + A2:2001 Note 2.1 |
Date expired (1.4.2007) |
|
Cenelec |
EN 60947-1:2007 |
|
|
Low-voltage switchgear and controlgear — Part 1: General rules (IEC 60947-1:2007) |
EN 60947-1:2004 Note 2.1 |
1.7.2010 |
|
Cenelec |
EN 60947-2:2003 |
|
|
Low-voltage switchgear and controlgear — Part 2: Circuit-breakers (IEC 60947-2:2003) |
EN 60947-2:1996 + A1:1997 + A2:2001 Note 2.1 |
Date expired (1.6.2006) |
|
Cenelec |
EN 60947-2:2006 |
|
|
Low-voltage switchgear and controlgear — Part 2: Circuit-breakers (IEC 60947-2:2006) |
EN 60947-2:2003 Note 2.1 |
1.7.2009 |
|
Cenelec |
EN 60947-3:1999 |
|
|
Low-voltage switchgear and controlgear — Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units (IEC 60947-3:1999) |
EN 60947-3:1992 + A1:1995 + A2:1997 Note 2.1 |
Date expired (1.1.2002) |
|
Amendment A1:2001 to EN 60947-3:1999 (IEC 60947-3:1999/A1:2001) |
Note 3 |
Date expired (1.3.2004) |
|
Amendment A2:2005 to EN 60947-3:1999 (IEC 60947-3:1999/A2:2005) |
Note 3 |
Date expired (1.6.2008) |
|
Cenelec |
EN 60947-4-1:2001 |
|
|
Low-voltage switchgear and controlgear — Part 4-1: Contactors and motor-starters — Electromechanical contactors and motor-starters (IEC 60947-4-1:2000) |
EN 60947-4-1:1992 + A1:1995 + A2:1997 Note 2.1 |
Date expired (1.9.2003) |
|
Amendment A1:2002 to EN 60947-4-1:2001 (IEC 60947-4-1:2000/A1:2002) |
Note 3 |
Date expired (1.10.2005) |
|
Amendment A2:2005 to EN 60947-4-1:2001 (IEC 60947-4-1:2000/A2:2005) |
Note 3 |
Date expired (1.7.2008) |
|
Cenelec |
EN 60947-4-2:2000 |
|
|
Low-voltage switchgear and controlgear — Part 4-2: Contactors and motor-starters — AC semiconductor motor controllers and starters (IEC 60947-4-2:1999) |
HD 419.2 S1:1987 + EN 60947-4-2:1996 + A1:1997 + A2:1998 Note 2.1 |
Date expired (1.12.2002) |
|
Amendment A1:2002 to EN 60947-4-2:2000 (IEC 60947-4-2:1999/A1:2001) |
Note 3 |
Date expired (1.3.2005) |
|
Amendment A2:2006 to EN 60947-4-2:2000 (IEC 60947-4-2:1999/A2:2006) |
Note 3 |
1.12.2009 |
|
Cenelec |
EN 60947-4-3:2000 |
|
|
Low-voltage switchgear and controlgear — Part 4-3: Contactors and motor-starters — AC semiconductor controllers and contactors for non-motor loads (IEC 60947-4-3:1999) |
HD 419.2 S1:1987 Note 2.1 |
Date expired (1.12.2002) |
|
Amendment A1:2006 to EN 60947-4-3:2000 (IEC 60947-4-3:1999/A1:2006) |
Note 3 |
1.11.2009 |
|
Cenelec |
EN 60947-5-1:2004 |
|
|
Low-voltage switchgear and controlgear — Part 5-1: Control circuit devices and switching elements — Electromechanical control circuit devices (IEC 60947-5-1:2003) |
EN 60947-5-1:1997 + A1:1999 + A2:2000 + A12:1999 Note 2.1 |
Date expired (1.5.2007) |
|
Cenelec |
EN 60947-5-2:1998 |
|
|
Low-voltage switchgear and controlgear — Part 5-2: Control circuit devices and switching elements — Proximity switches (IEC 60947-5-2:1997 (Modified)) |
EN 60947-5-2:1997 Note 2.1 |
Date expired (1.10.2001) |
|
Amendment A1:1999 to EN 60947-5-2:1998 (IEC 60947-5-2:1997/A1:1999) |
Note 3 |
Date expired (1.8.2002) |
|
Amendment A2:2004 to EN 60947-5-2:1998 (IEC 60947-5-2:1997/A2:2003) |
Note 3 |
Date expired (1.2.2007) |
|
Cenelec |
EN 60947-5-2:2007 |
|
|
Low-voltage switchgear and controlgear — Part 5-2: Control circuit devices and switching elements — Proximity switches (IEC 60947-5-2:2007) |
EN 60947-5-2:1998 and its amendments Note 2.1 |
1.11.2010 |
|
Cenelec |
EN 60947-5-3:1999 |
|
|
Low-voltage switchgear and controlgear — Part 5-3: Control circuit devices and switching elements — Requirements for proximity devices with defined behaviour under fault conditions (PDF) (IEC 60947-5-3:1999) |
None |
— |
|
Amendment A1:2005 to EN 60947-5-3:1999 (IEC 60947-5-3:1999/A1:2005) |
Note 3 |
Date expired (1.3.2008) |
|
Cenelec |
EN 60947-5-4:2003 |
|
|
Low-voltage switchgear and controlgear — Part 5-4: Control circuit devices and switching elements — Method of assessing the performance of low-energy contacts — Special tests (IEC 60947-5-4:2002) |
EN 60947-5-4:1997 Note 2.1 |
Date expired (1.12.2006) |
|
Cenelec |
EN 60947-5-5:1997 |
|
|
Low-voltage switchgear and controlgear — Part 5-5: Control circuit devices and switching elements — Electrical emergency stop device with mechanical latching function (IEC 60947-5-5:1997) |
None |
— |
|
Amendment A1:2005 to EN 60947-5-5:1997 (IEC 60947-5-5:1997/A1:2005) |
Note 3 |
Date expired (1.3.2008) |
|
Cenelec |
EN 60947-5-7:2003 |
|
|
Low-voltage switchgear and controlgear — Part 5-7: Control circuit devices and switching elements — Requirements for proximity devices with analogue output (IEC 60947-5-7:2003) |
EN 50319:1999 Note 2.1 |
Date expired (1.9.2006) |
|
Cenelec |
EN 60947-5-8:2006 |
|
|
Low-voltage switchgear and controlgear — Part 5-8: Control circuit devices and switching elements — Three-position enabling switches (IEC 60947-5-8:2006) |
None |
— |
|
Cenelec |
EN 60947-5-9:2007 |
|
|
Low-voltage switchgear and controlgear — Part 5-9: Control circuit devices and switching elements — Flow rate switches (IEC 60947-5-9:2006) |
None |
— |
|
Cenelec |
EN 60947-6-1:1991 |
|
|
Low-voltage switchgear and controlgear — Part 6-1: Multiple function equipment — Automatic transfer switching equipment (IEC 60947-6-1:1989) |
None |
— |
|
Amendment A2:1997 to EN 60947-6-1:1991 (IEC 60947-6-1:1989/A2:1997) |
EN 60947-6-1:1991/A11:1997 Note 3 |
Date expired (1.7.1998) |
|
Amendment A1:1994 to EN 60947-6-1:1991 (IEC 60947-6-1:1989/A1:1994) |
Note 3 |
Date expired (1.10.2000) |
|
Cenelec |
EN 60947-6-1:2005 |
|
|
Low-voltage switchgear and controlgear — Part 6-1: Multiple function equipment — Transfer switching equipment (IEC 60947-6-1:2005) |
EN 60947-6-1:1991 and its amendments Note 2.1 |
1.10.2008 |
|
Cenelec |
EN 60947-6-2:2003 |
|
|
Low-voltage switchgear and controlgear — Part 6-2: Multiple function equipment — Control and protective switching devices (or equipment) (CPS) (IEC 60947-6-2:2002) |
EN 60947-6-2:1993 + A1:1997 + A2:1999 Note 2.1 |
Date expired (1.9.2005) |
|
Amendment A1:2007 to EN 60947-6-2:2003 (IEC 60947-6-2:2002/A1:2007) |
Note 3 |
1.3.2010 |
|
Cenelec |
EN 60947-7-1:2002 |
|
|
Low-voltage switchgear and controlgear — Part 7-1: Ancillary equipment — Terminal blocks for copper conductors (IEC 60947-7-1:2002) |
EN 60947-7-1:1991 + A1:1999 + A11:1997 Note 2.1 |
Date expired (1.10.2005) |
|
Cenelec |
EN 60947-7-2:2002 |
|
|
Low-voltage switchgear and controlgear — Part 7-2: Ancillary equipment — Protective conductor terminal blocks for copper conductors (IEC 60947-7-2:2002) |
EN 60947-7-2:1995 Note 2.1 |
Date expired (1.10.2005) |
|
Cenelec |
EN 60947-7-3:2002 |
|
|
Low-voltage switchgear and controlgear — Part 7-3: Ancillary equipment — Safety requirements for fuse terminal blocks (IEC 60947-7-3:2002) |
None |
— |
|
Cenelec |
EN 60947-8:2003 |
|
|
Low-voltage switchgear and controlgear — Part 8: Control units for built-in thermal protection (PTC) for rotating electrical machines (IEC 60947-8:2003) |
None |
— |
|
Amendment A1:2006 to EN 60947-8:2003 (IEC 60947-8:2003/A1:2006) |
Note 3 |
1.10.2009 |
|
Cenelec |
EN 60950-1:2001 |
|
|
Information technology equipment — Safety — Part 1: General requirements (IEC 60950-1:2001 (Modified)) |
EN 60950:2000 Note 2.1 |
Date expired (1.7.2006) |
|
Amendment A11:2004 to EN 60950-1:2001 |
Note 3 |
— |
|
Cenelec |
EN 60950-1:2006 |
|
|
Information technology equipment — Safety — Part 1: General requirements (IEC 60950-1:2005 (Modified)) |
EN 60950-1:2001 and its amendment Note 2.1 |
1.12.2010 |
|
Cenelec |
EN 60950-21:2003 |
|
|
Information technology equipment — Safety — Part 21: Remote power feeding (IEC 60950-21:2002) |
None |
— |
|
Cenelec |
EN 60950-22:2006 |
|
|
Information technology equipment — Safety — Part 22: Equipment installed outdoors (IEC 60950-22:2005 (Modified)) |
None |
— |
|
Cenelec |
EN 60950-23:2006 |
|
|
Information technology equipment — Safety — Part 23: Large data storage equipment (IEC 60950-23:2005) |
None |
— |
|
Cenelec |
EN 60968:1990 |
|
|
Self-ballasted lamps for general lighting services — Safety requirements (IEC 60968:1988 (Modified)) |
None |
— |
|
Amendment A1:1993 to EN 60968:1990 (IEC 60968:1988/A1:1991) |
Note 3 |
Date expired (1.12.1998) |
|
Amendment A2:1999 to EN 60968:1990 (IEC 60968:1988/A2:1999) |
Note 3 |
Date expired (1.10.2002) |
|
Cenelec |
EN 60974-1:1998 |
|
|
Arc welding equipment — Part 1: Welding power sources (IEC 60974-1:1998) |
EN 60974-1:1990 Note 2.1 |
Date expired (1.1.2001) |
|
Amendment A1:2000 to EN 60974-1:1998 (IEC 60974-1:1998/A1:2000) |
Note 2.3 |
Date expired (1.4.2003) |
|
Amendment A2:2003 to EN 60974-1:1998 (IEC 60974-1:1998/A2:2003) |
Note 3 |
Date expired (1.6.2006) |
|
Cenelec |
EN 60974-1:2005 |
|
|
Arc welding equipment — Part 1: Welding power sources (IEC 60974-1:2005) |
EN 60974-1:1998 and its amendments Note 2.1 |
1.10.2008 |
|
Cenelec |
EN 60974-2:2003 |
|
|
Arc welding equipment — Part 2: Liquid cooling systems (IEC 60974-2:2002) |
None |
— |
|
Cenelec |
EN 60974-2:2008 |
|
|
Arc welding equipment — Part 2: Liquid cooling systems (IEC 60974-2:2007) |
EN 60974-2:2003 Note 2.1 |
1.2.2011 |
|
Cenelec |
EN 60974-3:2003 |
|
|
Arc welding equipment — Part 3: Arc striking and stabilizing devices (IEC 60974-3:2003) |
None |
— |
|
Cenelec |
EN 60974-3:2007 |
|
|
Arc welding equipment — Part 3: Arc striking and stabilizing devices (IEC 60974-3:2007) |
EN 60974-3:2003 Note 2.1 |
1.12.2010 |
|
Cenelec |
EN 60974-4:2007 |
|
|
Arc welding equipment — Part 4: In-service inspection and testing (IEC 60974-4:2006) |
None |
— |
|
Cenelec |
EN 60974-5:2002 |
|
|
Arc welding equipment — Part 5: Wire feeders (IEC 60974-5:2002) |
None |
— |
|
Cenelec |
EN 60974-5:2008 |
|
|
Arc welding equipment — Part 5: Wire feeders (IEC 60974-5:2007) |
EN 60974-5:2002 Note 2.1 |
1.2.2011 |
|
Cenelec |
EN 60974-6:2003 |
|
|
Arc welding equipment — Part 6: Limited duty manual metal arc welding power sources (IEC 60974-6:2003) |
EN 50060:1989 + A1:1994 Note 2.1 |
Date expired (1.3.2006) |
|
Cenelec |
EN 60974-7:2000 |
|
|
Arc welding equipment — Part 7: Torches (IEC 60974-7:2000) |
EN 50078:1993 + EN 50192:1995 Note 2.1 |
Date expired (1.12.2002) |
|
Cenelec |
EN 60974-7:2005 |
|
|
Arc welding equipment — Part 7: Torches (IEC 60974-7:2005) |
EN 60974-7:2000 Note 2.1 |
Date expired (1.8.2008) |
|
Cenelec |
EN 60974-8:2004 |
|
|
Arc welding equipment — Part 8: Gas consoles for welding and plasma cutting systems (IEC 60974-8:2004) |
None |
— |
|
Cenelec |
EN 60974-11:2004 |
|
|
Arc welding equipment — Part 11: Electrode holders (IEC 60974-11:2004) |
EN 60974-11:1995 Note 2.1 |
Date expired (1.9.2007) |
|
Cenelec |
EN 60974-12:1995 |
|
|
Arc welding equipment — Part 12: Coupling devices for welding cables (IEC 60974-12:1992 (Modified)) |
HD 433 S1:1983 Note 2.1 |
Date expired (1.12.2000) |
|
Cenelec |
EN 60974-12:2005 |
|
|
Arc welding equipment — Part 12: Coupling devices for welding cables (IEC 60974-12:2005) |
EN 60974-12:1995 Note 2.1 |
Date expired (1.7.2008) |
|
Cenelec |
EN 60998-1:2004 |
|
|
Connecting devices for low-voltage circuits for household and similar purposes — Part 1: General requirements (IEC 60998-1:2002 (Modified)) |
EN 60998-1:1993 + A1:2001 Note 2.1 |
Date expired (1.3.2007) |
|
Cenelec |
EN 60998-2-1:2004 |
|
|
Connecting devices for low-voltage circuits for household and similar purposes — Part 2-1: Particular requirements for connecting devices as separate entities with screw-type clamping units (IEC 60998-2-1:2002 (Modified)) |
EN 60998-2-1:1993 Note 2.1 |
Date expired (1.3.2007) |
|
Cenelec |
EN 60998-2-2:2004 |
|
|
Connecting devices for low-voltage circuits for household and similar purposes — Part 2-2: Particular requirements for connecting devices as separate entities with screwless-type clamping units (IEC 60998-2-2:2002 (Modified)) |
EN 60998-2-2:1993 Note 2.1 |
Date expired (1.3.2007) |
|
Cenelec |
EN 60998-2-3:2004 |
|
|
Connecting devices for low-voltage circuits for household and similar purposes — Part 2-3: Particular requirements for connecting devices as separate entities with insulation-piercing clamping units (IEC 60998-2-3:2002 (Modified)) |
EN 60998-2-3:1993 Note 2.1 |
Date expired (1.3.2007) |
|
Cenelec |
EN 60998-2-4:2005 |
|
|
Connecting devices for low voltage circuits for household and similar purposes — Part 2-4: Particular requirements for twist-on connecting devices (IEC 60998-2-4:2004 (Modified)) |
EN 60998-2-4:1993 Note 2.1 |
Date expired (1.3.2008) |
|
Cenelec |
EN 60999-1:2000 |
|
|
Connecting devices — Electrical copper conductors — Safety requirements for screw-type and screwless-type clamping units — Part 1: General requirements and particular requirements for clamping units for conductors from 0,2 mm2 up to 35 mm2 (included) (IEC 60999-1:1999) |
EN 60999-1:1993 Note 2.1 |
Date expired (1.1.2003) |
|
Cenelec |
EN 60999-2:2003 |
|
|
Connecting devices — Electrical copper conductors — Safety requirements for screw-type and screwless-type clamping units — Part 2: Particular requirements for clamping units for conductors above 35 mm2 up to 300 mm2 (included) (IEC 60999-2:2003) |
None |
— |
|
Cenelec |
EN 61008-1:1994 |
|
|
Electrical accessories — Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCB's) — Part 1: General rules (IEC 61008-1:1990 (Modified) + A1:1992 (Modified)) |
None |
— |
|
Amendment A17:2000 to EN 61008-1:1994 |
Note 3 |
— |
|
Amendment A2:1995 to EN 61008-1:1994 (IEC 61008-1:1990/A2:1995) |
Note 3 |
Date expired (1.7.2000) |
|
Amendment A11:1995 to EN 61008-1:1994 |
Note 3 |
Date expired (1.7.2000) |
|
Amendment A12:1998 to EN 61008-1:1994 |
Note 3 |
Date expired (1.1.2001) |
|
Amendment A14:1998 to EN 61008-1:1994 |
Note 3 |
Date expired (1.1.2001) |
|
Amendment A13:1998 to EN 61008-1:1994 |
Note 3 |
Date expired (1.3.2003) |
|
Cenelec |
EN 61008-1:2004 |
|
|
Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCB's) — Part 1: General rules (IEC 61008-1:1996 (Modified) + A1:2002 (Modified)) |
EN 61008-1:1994 and its amendments Note 2.1 |
1.4.2009 |
|
Amendment A11:2007 to EN 61008-1:2004 |
Note 3 |
1.4.2009 |
|
Cenelec |
EN 61008-2-1:1994 |
|
|
Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCB's) — Part 2-1: Applicability of the general rules to RCCB's functionally independent of line voltage (IEC 61008-2-1:1990) |
None |
— |
|
Amendment A11:1998 to EN 61008-2-1:1994 |
Note 3 |
Date expired (1.4.2001) |
|
Cenelec |
EN 61009-1:1994 |
|
|
Electrical accessories — Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBO's) — Part 1: General rules (IEC 61009-1:1991 (Modified)) |
None |
— |
|
Amendment A19:2000 to EN 61009-1:1994 |
Note 3 |
— |
|
Amendment A1:1995 to EN 61009-1:1994 (IEC 61009-1:1991/A1:1995) |
Note 3 |
Date expired (1.7.2000) |
|
Amendment A11:1995 to EN 61009-1:1994 |
Note 3 |
Date expired (1.7.2000) |
|
Amendment A2:1998 to EN 61009-1:1994 |
Note 3 |
Date expired (1.1.2001) |
|
Amendment A13:1998 to EN 61009-1:1994 |
Note 3 |
Date expired (1.1.2001) |
|
Amendment A14:1998 to EN 61009-1:1994 |
Note 3 |
Date expired (1.1.2001) |
|
Amendment A15:1998 to EN 61009-1:1994 |
Note 3 |
Date expired (1.3.2003) |
|
Cenelec |
EN 61009-1:2004 |
|
|
Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBO's) — Part 1: General rules (IEC 61009-1:1996 (Modified) + A1:2002 (Modified)) |
EN 61009-1:1994 and its amendments Note 2.1 |
1.4.2009 |
|
Cenelec |
EN 61009-2-1:1994 |
|
|
Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBO's) — Part 2-1: Applicability of the general rules to RCBO's functionally independent of line voltage (IEC 61009-2-1:1991) |
None |
— |
|
Amendment A11:1998 to EN 61009-2-1:1994 |
Note 3 |
Date expired (1.4.2001) |
|
Cenelec |
EN 61010-1:2001 |
|
|
Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 1: General requirements (IEC 61010-1:2001) |
EN 61010-1:1993 + A2:1995 Note 2.1 |
Date expired (1.1.2004) |
|
Cenelec |
EN 61010-2-010:2003 |
|
|
Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 2-010: Particular requirements for laboratory equipment for the heating of material (IEC 61010-2-010:2003) |
EN 61010-2-010:1994 + A1:1996 Note 2.1 |
Date expired (1.10.2006) |
|
Cenelec |
EN 61010-2-020:1994 |
|
|
Safety requirements for electrical equipment for measurement, control and laboratory use — Part 2-020: Particular requirements for laboratory centrifuges (IEC 61010-2-020:1992 (Modified)) |
None |
— |
|
Amendment A1:1996 to EN 61010-2-020:1994 (IEC 61010-2-020:1992/A1:1996) |
Note 3 |
Date expired (1.12.2001) |
|
Cenelec |
EN 61010-2-020:2006 |
|
|
Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 2-020: Particular requirements for laboratory centrifuges (IEC 61010-2-020:2006) |
EN 61010-2-020:1994 and its amendment Note 2.1 |
1.7.2009 |
|
Cenelec |
EN 61010-2-032:2002 |
|
|
Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 2-032: Particular requirements for hand-held and hand-manipulated current sensors for electrical test and measurement (IEC 61010-2-032:2002) |
EN 61010-2-032:1995 Note 2.1 |
Date expired (1.11.2005) |
|
Cenelec |
EN 61010-2-040:2005 |
|
|
Safety requirements for electrical equipment for measurement, control and laboratory use — Part 2-040: Particular requirements for sterilizers and washer-disinfectors used to treat medical materials (IEC 61010-2-040:2005) |
EN 61010-2-041:1996 + EN 61010-2-042:1997 + EN 61010-2-043:1997 + EN 61010-2-045:2000 Note 2.1 |
Date expired (1.6.2008) |
|
Cenelec |
EN 61010-2-051:2003 |
|
|
Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 2-051: Particular requirements for laboratory equipment for mixing and stirring (IEC 61010-2-051:2003) |
EN 61010-2-051:1995 Note 2.1 |
Date expired (1.10.2006) |
|
Cenelec |
EN 61010-2-061:2003 |
|
|
Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization (IEC 61010-2-061:2003) |
EN 61010-2-061:1996 Note 2.1 |
Date expired (1.10.2006) |
|
Cenelec |
EN 61010-2-081:2002 |
|
|
Safety requirements for electrical equipment for measurement, control and laboratory use — Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes (IEC 61010-2-081:2001) |
None |
— |
|
Amendment A1:2003 to EN 61010-2-081:2002 (IEC 61010-2-081:2001/A1:2003) |
Note 3 |
Date expired (1.10.2006) |
|
Cenelec |
EN 61010-031:2002 |
|
|
Safety requirements for electrical equipment for measurement, control and laboratory use — Part 031: Safety requirements for hand-held probe assemblies for electrical measurement and test (IEC 61010-031:2002) |
EN 61010-2-031:1994 Note 2.1 |
Date expired (1.2.2005) |
|
Cenelec |
EN 61028:1993 |
|
|
Electrical measuring instruments — X-Y recorders (IEC 61028:1991) |
None |
— |
|
Amendment A2:1997 to EN 61028:1993 (IEC 61028:1991/A2:1997) |
Note 3 |
Date expired (1.7.1998) |
|
Cenelec |
EN 61034-1:2005 |
|
|
Measurement of smoke density of cables burning under defined conditions — Part 1: Test apparatus (IEC 61034-1:2005) |
EN 50268-1:1999 Note 2.1 |
Date expired (1.6.2008) |
|
Cenelec |
EN 61034-2:2005 |
|
|
Measurement of smoke density of cables burning under defined conditions — Part 2: Test procedure and requirements (IEC 61034-2:2005) |
EN 50268-2:1999 Note 2.1 |
Date expired (1.6.2008) |
|
Cenelec |
EN 61048:1993 |
|
|
Auxiliaries for lamps — Capacitors for use in tubular fluorescent and other discharge lamp circuits — General and safety requirements (IEC 61048:1991 (Modified)) |
None |
— |
|
Amendment A1:1996 to EN 61048:1993 (IEC 61048:1991/A1:1995) |
Note 3 |
Date expired (1.9.2001) |
|
Amendment A2:1999 to EN 61048:1993 (IEC 61048:1991/A2:1999) |
Note 3 |
Date expired (1.10.2001) |
|
Cenelec |
EN 61048:2006 |
|
|
Auxiliaries for lamps — Capacitors for use in tubular fluorescent and other discharge lamp circuits — General and safety requirements (IEC 61048:2006) |
EN 61048:1993 and its amendments Note 2.1 |
1.5.2009 |
|
Cenelec |
EN 61050:1992 |
|
|
Transformers for tubular discharge lamps having a no-load output voltage exceeding 1 kV (generally called neon-transformers) — General and safety requirements (IEC 61050:1991 (Modified)) |
None |
— |
|
Amendment A1:1995 to EN 61050:1992 (IEC 61050:1991/A1:1994 (Modified)) |
Note 3 |
Date expired (1.7.2001) |
|
Cenelec |
EN 61058-1:1992 |
|
|
Switches for appliances — Part 1: General requirements (IEC 61058-1:1990) |
None |
— |
|
Amendment A1:1993 to EN 61058-1:1992 (IEC 61058-1:1990/A1:1993) |
Note 3 |
Date expired (1.7.1995) |
|
Cenelec |
EN 61058-1:2002 |
|
|
Switches for appliances — Part 1: General requirements (IEC 61058-1:2000 (Modified) + A1:2001) |
EN 61058-1:1992 and its amendment Note 2.1 |
1.3.2009 |
|
Amendment A2:2008 to EN 61058-1:2002 (IEC 61058-1:2000/A2:2007) |
Note 3 |
1.12.2010 |
|
Cenelec |
EN 61058-2-1:1993 |
|
|
Switches for appliances — Part 2-1: Particular requirements for cord switches (IEC 61058-2-1:1992) |
None |
— |
|
Amendment A1:1996 to EN 61058-2-1:1993 (IEC 61058-2-1:1992/A1:1995) |
Note 3 |
Date expired (1.9.2001) |
|
Amendment A11:2002 to EN 61058-2-1:1993 |
Note 3 |
1.3.2009 |
|
Cenelec |
EN 61058-2-4:2005 |
|
|
Switches for appliances — Part 2-4: Particular requirements for independently mounted switches (IEC 61058-2-4:1995 + A1:2003) |
None |
— |
|
Cenelec |
EN 61058-2-5:1994 |
|
|
Switches for appliances — Part 2-5: Particular requirements for change-over selectors (IEC 61058-2-5:1994) |
None |
— |
|
Amendment A11:2002 to EN 61058-2-5:1994 |
Note 3 |
1.3.2009 |
|
Cenelec |
EN 61071:2007 |
|
|
Capacitors for power electronics (IEC 61071:2007) |
EN 61071-1:1996 + EN 61071-2:1996 Note 2.1 |
1.4.2010 |
|
Cenelec |
EN 61071-1:1996 |
|
|
Power electronic capacitors — Part 1: General (IEC 61071-1:1991 (Modified)) |
None |
— |
|
Cenelec |
EN 61071-2:1996 |
|
|
Power electronic capacitors — Part 2: Requirements for disconnecting test on fuses, destruction test, self-healing test and endurance test (IEC 61071-2:1994) |
None |
— |
|
Cenelec |
EN 61095:1993 |
|
|
Electromechanical contactors for household and similar purposes (IEC 61095:1992) |
None |
— |
|
Amendment A1:2000 to EN 61095:1993 (IEC 61095:1992/A1:2000) |
EN 61095:1993/A11:1996 Note 3 |
Date expired (1.8.2003) |
|
Cenelec |
EN 61131-2:2003 |
|
|
Programmable controllers — Part 2: Equipment requirements and tests (IEC 61131-2:2003) |
EN 61131-2:1994 + A11:1996 + A12:2000 Note 2.1 |
Date expired (1.5.2006) |
|
Cenelec |
EN 61131-2:2007 |
|
|
Programmable controllers — Part 2: Equipment requirements and tests (IEC 61131-2:2007) |
EN 61131-2:2003 Note 2.1 |
1.8.2010 |
|
Cenelec |
EN 61138:1997 |
|
|
Cables for portable earthing and short-circuiting equipment (IEC 61138:1994 (Modified) + A1:1995 (Modified)) |
None |
— |
|
Amendment A11:2003 to EN 61138:1997 |
Note 3 |
Date expired (1.2.2005) |
|
Cenelec |
EN 61138:2007 |
|
|
Cables for portable earthing and short-circuiting equipment (IEC 61138:2007 (Modified)) |
EN 61138:1997 and its amendment Note 2.1 |
1.10.2009 |
|
Cenelec |
EN 61140:2002 |
|
|
Protection against electric shock — Common aspects for installation and equipment (IEC 61140:2001) |
None |
— |
|
Amendment A1:2006 to EN 61140:2002 (IEC 61140:2001/A1:2004 (Modified)) |
Note 3 |
1.5.2009 |
|
Cenelec |
EN 61143-1:1994 |
|
|
Electrical measuring instruments — X-t recorders — Part 1: Definitions and requirements (IEC 61143-1:1992) |
None |
— |
|
Amendment A1:1997 to EN 61143-1:1994 (IEC 61143-1:1992/A1:1997) |
Note 3 |
Date expired (1.7.2003) |
|
Cenelec |
EN 61143-2:1994 |
|
|
Electrical measuring instruments — X-t recorders — Part 2: Recommended additional test methods (IEC 61143-2:1992) |
None |
— |
|
Cenelec |
EN 61167:1994 |
|
|
Metal halide lamps (IEC 61167:1992) |
None |
— |
|
Amendment A1:1995 to EN 61167:1994 (IEC 61167:1992/A1:1995) |
Note 3 |
Date expired (1.3.1996) |
|
Amendment A2:1997 to EN 61167:1994 (IEC 61167:1992/A2:1997) |
Note 3 |
Date expired (1.4.1998) |
|
Amendment A3:1998 to EN 61167:1994 (IEC 61167:1992/A3:1998) |
Note 3 |
Date expired (1.7.2001) |
|
Cenelec |
EN 61184:1997 |
|
|
Bayonet lampholders (IEC 61184:1997) |
EN 61184:1994 + A1:1996 Note 2.1 |
Date expired (1.7.2003) |
|
Amendment A2:2004 to EN 61184:1997 (IEC 61184:1997/A2:2004) |
Note 3 |
Date expired (1.10.2007) |
|
Amendment A1:2001 to EN 61184:1997 (IEC 61184:1997/A1:2000) |
Note 3 |
Date expired (1.12.2007) |
|
Cenelec |
EN 61187:1994 |
|
|
Electrical and electronic measuring equipment — Documentation (IEC 61187:1993 (Modified)) |
None |
— |
|
Cenelec |
EN 61195:1999 |
|
|
Double-capped fluorescent lamps — Safety specifications (IEC 61195:1999) |
EN 61195:1994 + A1:1998 Note 2.1 |
Date expired (1.12.2002) |
|
Cenelec |
EN 61199:1999 |
|
|
Single-capped fluorescent lamps — Safety specifications (IEC 61199:1999) |
EN 61199:1994 + A1:1997 + A2:1998 Note 2.1 |
Date expired (1.12.2002) |
|
Cenelec |
EN 61204:1995 |
|
|
Low-voltage power supply devices, d.c. output — Performance characteristics (IEC 61204:1993 (Modified)) |
None |
— |
|
Cenelec |
EN 61210:1995 |
|
|
Connecting devices — Flat quick-connect terminations for electrical copper conductors — Safety requirements (IEC 61210:1993 (Modified)) |
None |
— |
|
Cenelec |
EN 61230:1995 |
|
|
Live working — Portable equipment for earthing or earthing and short-circuiting (IEC 61230:1993 (Modified)) |
None |
— |
|
Amendment A11:1999 to EN 61230:1995 |
Note 3 |
Date expired (1.10.2002) |
|
Cenelec |
EN 61236:1995 |
|
|
Saddles, pole clamps (stick clamps) and accessories for live working (IEC 61236:1993 (Modified)) |
None |
— |
|
Cenelec |
EN 61242:1997 |
|
|
Electrical accessories — Cable reels for household and similar purposes (IEC 61242:1995 (Modified)) Note 11 |
None |
— |
|
Amendment A11:2004 to EN 61242:1997 |
Note 3 |
Date expired (1.12.2004) |
|
Amendment A12:2006 to EN 61242:1997 |
Note 3 |
1.9.2008 |
|
Cenelec |
EN 61243-3:1998 |
|
|
Live working — Voltage detectors — Part 3: Two-pole low-voltage type (IEC 61243-3:1998) |
None |
— |
|
Cenelec |
EN 61270-1:1996 |
|
|
Capacitors for microwave ovens — Part 1: General (IEC 61270-1:1996) |
None |
— |
|
Cenelec |
EN 61293:1994 |
|
|
Marking of electrical equipment with ratings related to electrical supply — Safety requirements (IEC 61293:1994) |
None |
— |
|
Cenelec |
EN 61307:1996 |
|
|
Industrial microwave heating installations — Test methods for the determination of power output (IEC 61307:1994) |
None |
— |
|
Cenelec |
EN 61310-1:1995 |
|
|
Safety of machinery — Indication, marking and actuation — Part 1: Requirements for visual, auditory and tactile signals (IEC 61310-1:1995) |
None |
— |
|
Cenelec |
EN 61310-1:2008 |
|
|
Safety of machinery — Indication, marking and actuation — Part 1: Requirements for visual, acoustic and tactile signals (IEC 61310-1:2007) |
EN 61310-1:1995 Note 2.1 |
1.12.2010 |
|
Cenelec |
EN 61310-2:1995 |
|
|
Safety of machinery — Indication, marking and actuation — Part 2: Requirements for marking (IEC 61310-2:1995) |
None |
— |
|
Cenelec |
EN 61310-2:2008 |
|
|
Safety of machinery — Indication, marking and actuation — Part 2: Requirements for marking (IEC 61310-2:2007) |
EN 61310-2:1995 Note 2.1 |
1.12.2010 |
|
Cenelec |
EN 61310-3:1999 |
|
|
Safety of machinery — Indication, marking and actuation — Part 3: Requirements for the location and operation of actuators (IEC 61310-3:1999) |
None |
— |
|
Cenelec |
EN 61310-3:2008 |
|
|
Safety of machinery — Indication, marking and actuation — Part 3: Requirements for the location and operation of actuators (IEC 61310-3:2007) |
EN 61310-3:1999 Note 2.1 |
1.12.2010 |
|
Cenelec |
EN 61316:1999 |
|
|
Industrial cable reels (IEC 61316:1999) |
None |
— |
|
Cenelec |
EN 61347-1:2001 |
|
|
Lamp controlgear — Part 1: General and safety requirements (IEC 61347-1:2000) |
None |
— |
|
Cenelec |
EN 61347-2-1:2001 |
|
|
Lamp controlgear — Part 2-1: Particular requirements for starting devices (other than glow starters) (IEC 61347-2-1:2000) |
EN 60926:1996 + A1:1999 Note 2.1 |
Date expired (1.12.2006) |
|
Amendment A1:2006 to EN 61347-2-1:2001 (IEC 61347-2-1:2000/A1:2005) |
Note 3 |
1.2.2009 |
|
Cenelec |
EN 61347-2-2:2001 |
|
|
Lamp controlgear — Part 2-2: Particular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps (IEC 61347-2-2:2000) |
EN 61046:1994 + A1:1996 Note 2.1 |
Date expired (1.12.2006) |
|
Amendment A1:2006 to EN 61347-2-2:2001 (IEC 61347-2-2:2000/A1:2005) |
Note 3 |
1.2.2009 |
|
Amendment A2:2006 to EN 61347-2-2:2001 (IEC 61347-2-2:2000/A2:2006) |
Note 3 |
1.6.2009 |
|
Cenelec |
EN 61347-2-3:2001 |
|
|
Lamp controlgear — Part 2-3: Particular requirements for a.c. supplied electronic ballasts for fluorescent lamps (IEC 61347-2-3:2000) |
EN 60928:1995 + A1:1999 Note 2.1 |
Date expired (1.12.2006) |
|
Amendment A1:2004 to EN 61347-2-3:2001 (IEC 61347-2-3:2000/A1:2004) |
Note 3 |
Date expired (1.9.2007) |
|
Amendment A2:2006 to EN 61347-2-3:2001 (IEC 61347-2-3:2000/A2:2006) |
Note 3 |
1.2.2009 |
|
Cenelec |
EN 61347-2-4:2001 |
|
|
Lamp controlgear — Part 2-4: Particular requirements for d.c. supplied electronic ballasts for general lighting (IEC 61347-2-4:2000) |
EN 60924:1991 + A1:1994 Note 2.1 |
Date expired (1.12.2006) |
|
Cenelec |
EN 61347-2-7:2001 |
|
|
Lamp controlgear — Part 2-7: Particular requirements for d.c. supplied electronic ballasts for emergency lighting (IEC 61347-2-7:2000) |
EN 60924:1991 + A1:1994 Note 2.1 |
Date expired (1.12.2006) |
|
Cenelec |
EN 61347-2-7:2006 |
|
|
Lamp controlgear — Part 2-7: Particular requirements for d.c. supplied electronic ballasts for emergency lighting (IEC 61347-2-7:2006) |
EN 61347-2-7:2001 Note 2.1 |
1.11.2009 |
|
Cenelec |
EN 61347-2-8:2001 |
|
|
Lamp controlgear — Part 2-8: Particular requirements for ballasts for fluorescent lamps (IEC 61347-2-8:2000) |
EN 60920:1991 + A1:1993 + A2:1996 + A11:2000 Note 2.1 |
Date expired (1.12.2006) |
|
Amendment A1:2006 to EN 61347-2-8:2001 (IEC 61347-2-8:2000/A1:2006) |
Note 3 |
1.2.2009 |
|
Cenelec |
EN 61347-2-9:2001 |
|
|
Lamp controlgear — Part 2-9: Particular requirements for ballasts for discharge lamps (excluding fluorescent lamps) (IEC 61347-2-9:2000) |
EN 60922:1997 Note 2.1 |
Date expired (1.12.2006) |
|
Amendment A2:2006 to EN 61347-2-9:2001 (IEC 61347-2-9:2000/A2:2006) |
Note 3 |
1.7.2009 |
|
Amendment A1:2003 to EN 61347-2-9:2001 (IEC 61347-2-9:2000/A1:2003) |
Note 3 |
1.12.2010 |
|
Cenelec |
EN 61347-2-10:2001 |
|
|
Lamp controlgear — Part 2-10: Particular requirements for electronic invertors and convertors for high-frequency operation of cold start tubular discharge lamps (neon tubes) (IEC 61347-2-10:2000) |
None |
— |
|
Cenelec |
EN 61347-2-11:2001 |
|
|
Lamp controlgear — Part 2-11: Particular requirements for miscellaneous electronic circuits used with luminaires (IEC 61347-2-11:2001) |
None |
— |
|
Cenelec |
EN 61347-2-12:2005 |
|
|
Lamp controlgear — Part 2-12: Particular requirements for d.c. or a.c. supplied electronic ballasts for discharge lamps (excluding fluorescent lamps) (IEC 61347-2-12:2005) |
None |
— |
|
Cenelec |
EN 61347-2-13:2006 |
|
|
Lamp controlgear — Part 2-13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules (IEC 61347-2-13:2006) |
None |
— |
|
Cenelec |
EN 61386-1:2004 |
|
|
Conduit systems for cable management — Part 1: General requirements (IEC 61386-1:1996 + A1:2000) |
EN 50086-1:1993 Note 2.1 |
— |
|
Cenelec |
EN 61386-21:2004 |
|
|
Conduit systems for cable management — Part 21: Particular requirements — Rigid conduit systems (IEC 61386-21:2002) |
EN 50086-2-1:1995 and its amendment Note 2.1 |
Date expired (30.6.2008) |
|
Cenelec |
EN 61386-22:2004 |
|
|
Conduit systems for cable management — Part 22: Particular requirements — Pliable conduit systems (IEC 61386-22:2002) |
EN 50086-2-2:1995 and its amendment Note 2.1 |
Date expired (30.6.2008) |
|
Cenelec |
EN 61386-23:2004 |
|
|
Conduit systems for cable management — Part 23: Particular requirements — Flexible conduit systems (IEC 61386-23:2002) |
EN 50086-2-3:1995 and its amendment Note 2.1 |
Date expired (30.6.2008) |
|
Cenelec |
EN 61400-2:1996 |
|
|
Wind turbine generator systems — Part 2: Safety of small wind turbines (IEC 61400-2:1996) |
None |
— |
|
Cenelec |
EN 61400-2:2006 |
|
|
Wind turbines — Part 2: Design requirements for small wind turbines (IEC 61400-2:2006) |
EN 61400-2:1996 Note 2.1 |
1.5.2009 |
|
Cenelec |
EN 61534-1:2003 |
|
|
Powertrack systems — Part 1: General requirements (IEC 61534-1:2003) |
None |
— |
|
Cenelec |
EN 61534-21:2006 |
|
|
Powertrack systems — Part 21: Particular requirements for powertrack systems intended for wall and ceiling mounting (IEC 61534-21:2006) |
None |
— |
|
Cenelec |
EN 61537:2001 |
|
|
Cable tray systems and cable ladder systems for cable management (IEC 61537:2001) |
None |
— |
|
Cenelec |
EN 61537:2007 |
|
|
Cable management — Cable tray systems and cable ladder systems (IEC 61537:2006) |
EN 61537:2001 Note 2.1 |
1.12.2009 |
|
Cenelec |
EN 61549:2003 |
|
|
Miscellaneous lamps (IEC 61549:2003) |
EN 61549:1996 + A1:1997 + A2:2001 Note 2.1 |
Date expired (1.6.2006) |
|
Amendment A1:2005 to EN 61549:2003 (IEC 61549:2003/A1:2005) |
Note 3 |
Date expired (1.4.2008) |
|
Cenelec |
EN 61557-1:1997 |
|
|
Electrical safety in low voltage distribution systems up to 1 kV a.c. and 1,5 kV d.c. — Equipment for testing, measuring or monitoring of protective measures — Part 1: General requirements (IEC 61557-1:1997) |
None |
— |
|
Cenelec |
EN 61557-1:2007 |
|
|
Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. — Equipment for testing, measuring or monitoring of protective measures — Part 1: General requirements (IEC 61557-1:2007) |
EN 61557-1:1997 Note 2.1 |
1.3.2010 |
|
Cenelec |
EN 61557-2:1997 |
|
|
Electrical safety in low voltage distribution systems up to 1 kV a.c. and 1,5 kV d.c. — Equipment for testing, measuring or monitoring of protective measures — Part 2: Insulation resistance (IEC 61557-2:1997) |
None Note 2.1 |
— |
|
Cenelec |
EN 61557-2:2007 |
|
|
Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. — Equipment for testing, measuring or monitoring of protective measures — Part 2: Insulation resistance (IEC 61557-2:2007) |
EN 61557-2:1997 Note 2.1 |
1.3.2010 |
|
Cenelec |
EN 61557-3:1997 |
|
|
Electrical safety in low voltage distribution systems up to 1 kV a.c. and 1,5 kV d.c. — Equipment for testing, measuring or monitoring of protective measures — Part 3: Loop impedance (IEC 61557-3:1997) |
None |
— |
|
Cenelec |
EN 61557-3:2007 |
|
|
Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. — Equipment for testing, measuring or monitoring of protective measures — Part 3: Loop impedance (IEC 61557-3:2007) |
EN 61557-3:1997 Note 2.1 |
1.3.2010 |
|
Cenelec |
EN 61557-4:1997 |
|
|
Electrical safety in low voltage distribution systems up to 1 kV a.c. and 1,5 kV d.c. — Equipment for testing, measuring or monitoring of protective measures — Part 4: Resistance of earth connection and equipotential bonding (IEC 61557-4:1997) |
None |
— |
|
Cenelec |
EN 61557-4:2007 |
|
|
Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. — Equipment for testing, measuring or monitoring of protective measures — Part 4: Resistance of earth connection and equipotential bonding (IEC 61557-4:2007) |
EN 61557-4:1997 Note 2.1 |
1.3.2010 |
|
Cenelec |
EN 61557-5:1997 |
|
|
Electrical safety in low voltage distribution systems up to 1 kV a.c. and 1,5 kV d.c. — Equipment for testing, measuring or monitoring of protective measures — Part 5: Resistance to earth (IEC 61557-5:1997) |
None |
— |
|
Cenelec |
EN 61557-5:2007 |
|
|
Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. — Equipment for testing, measuring or monitoring of protective measures — Part 5: Resistance to earth (IEC 61557-5:2007) |
EN 61557-5:1997 Note 2.1 |
1.3.2010 |
|
Cenelec |
EN 61557-6:1998 |
|
|
Electrical safety in low voltage distribution systems up to 1 kV a.c. and 1,5 kV d.c. — Equipment for testing, measuring or monitoring of protective measures — Part 6: Residual current devices (RCD) in TT, TN and IT systems (IEC 61557-6:1997 (Modified)) |
None |
— |
|
Cenelec |
EN 61557-6:2007 |
|
|
Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. — Equipment for testing, measuring or monitoring of protective measures — Part 6: Effectiveness of residual current devices (RCD) in TT, TN and IT systems (IEC 61557-6:2007) |
EN 61557-6:1998 Note 2.1 |
1.10.2010 |
|
Cenelec |
EN 61557-7:1997 |
|
|
Electrical safety in low voltage distribution systems up to 1 kV a.c. and 1,5 kV d.c. — Equipment for testing, measuring or monitoring of protective measures — Part 7: Phase sequence (IEC 61557-7:1997) |
None |
— |
|
Cenelec |
EN 61557-7:2007 |
|
|
Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. — Equipment for testing, measuring or monitoring of protective measures — Part 7: Phase sequence (IEC 61557-7:2007) |
EN 61557-7:1997 Note 2.1 |
1.3.2010 |
|
Cenelec |
EN 61557-8:1997 |
|
|
Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. — Equipment for testing, measuring or monitoring of protective measures — Part 8: Insulation monitoring devices for IT systems (IEC 61557-8:1997) |
None |
— |
|
Cenelec |
EN 61557-8:2007 |
|
|
Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. — Equipment for testing, measuring or monitoring of protective measures — Part 8: Insulation monitoring devices for IT systems (IEC 61557-8:2007) |
EN 61557-8:1997 Note 2.1 |
1.5.2010 |
|
Cenelec |
EN 61557-9:1999 |
|
|
Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. — Equipment for testing, measuring or monitoring of protective measures — Part 9: Equipment for insulation fault location in IT systems (IEC 61557-9:1999) |
None |
— |
|
Cenelec |
EN 61557-10:2001 |
|
|
Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. — Equipment for testing, measuring or monitoring of protective measures — Part 10: Combined measuring equipment for testing, measuring or monitoring of protective measures (IEC 61557-10:2000) |
None |
— |
|
Cenelec |
EN 61558-1:1997 |
|
|
Safety of power transformers, power supply units and similar — Part 1: General requirements and tests (IEC 61558-1:1997 (Modified)) |
EN 60742:1995 Note 2.3 |
Date expired (1.12.2005) |
|
Amendment A1:1998 to EN 61558-1:1997 (IEC 61558-1:1997/A1:1998) |
Note 3 |
Date expired (1.1.2001) |
|
Amendment A11:2003 to EN 61558-1:1997 |
Note 3 |
Date expired (1.12.2005) |
|
Cenelec |
EN 61558-1:2005 |
|
|
Safety of power transformers, power supplies, reactors and similar products — Part 1: General requirements and tests (IEC 61558-1:2005) |
EN 61558-1:1997 and its amendments Note 2.1 |
— |
|
Cenelec |
EN 61558-2-1:1997 |
|
|
Safety of power transformers, power supply units and similar — Part 2-1: Particular requirements for separating transformers for general use (IEC 61558-2-1:1997) |
None |
— |
|
Cenelec |
EN 61558-2-1:2007 |
|
|
Safety of power transformers, power supplies, reactors and similar products — Part 2-1: Particular requirements and tests for separating transformers and power supplies incorporating separating transformers for general applications (IEC 61558-2-1:2007) |
EN 61558-2-1:1997 Note 2.1 |
1.2.2010 |
|
Cenelec |
EN 61558-2-2:1998 |
|
|
Safety of power transformers, power supply units and similar — Part 2-2: Particular requirements for control transformers (IEC 61558-2-2:1997) |
None |
— |
|
Cenelec |
EN 61558-2-2:2007 |
|
|
Safety of power transformers, power supplies, reactors and similar products — Part 2-2: Particular requirements and tests for control transformers and power supplies incorporating control transformers (IEC 61558-2-2:2007) |
EN 61558-2-2:1998 Note 2.1 |
1.2.2010 |
|
Cenelec |
EN 61558-2-3:2000 |
|
|
Safety of power transformers, power supply units and similar devices — Part 2-3: Particular requirements for ignition transformers for gas and oil burners (IEC 61558-2-3:1999) |
None |
— |
|
Cenelec |
EN 61558-2-4:1997 |
|
|
Safety of power transformers, power supply units and similar — Part 2-4: Particular requirements for isolating transformers for general use (IEC 61558-2-4:1997) |
EN 60742:1995 Note 2.3 |
Date expired (1.8.2001) |
|
Cenelec |
EN 61558-2-5:1998 |
|
|
Safety of power transformers, power supply units and similar — Part 2-5: Particular requirements for shaver transformers and shaver supply units (IEC 61558-2-5:1997) |
EN 60742:1995 Note 2.3 |
Date expired (1.1.2002) |
|
Amendment A11:2004 to EN 61558-2-5:1998 |
Note 3 |
Date expired (1.6.2007) |
|
Cenelec |
EN 61558-2-6:1997 |
|
|
Safety of power transformers, power supply units and similar — Part 2-6: Particular requirements for safety isolating transformers for general use (IEC 61558-2-6:1997) |
EN 60742:1995 Note 2.3 |
Date expired (1.8.2001) |
|
Cenelec |
EN 61558-2-7:1997 |
|
|
Safety of power transformers, power supply units and similar — Part 2-7: Particular requirements for transformers for toys (IEC 61558-2-7:1997 (Modified)) |
EN 60742:1995 Note 2.3 |
Date expired (1.8.2001) |
|
Amendment A11:2002 to EN 61558-2-7:1997 |
Note 3 |
Date expired (1.9.2005) |
|
Cenelec |
EN 61558-2-7:2007 |
|
|
Safety of power transformers, power supplies, reactors and similar products — Part 2-7: Particular requirements and tests for transformers and power supplies for toys (IEC 61558-2-7:2007 (Modified)) |
EN 61558-2-7:1997 and its amendment Note 2.1 |
1.9.2010 |
|
Cenelec |
EN 61558-2-8:1998 |
|
|
Safety of power transformers, power supply units and similar — Part 2-8: Particular requirements for bell and chime transformers (IEC 61558-2-8:1998) |
EN 60742:1995 Note 2.3 |
Date expired (1.7.2001) |
|
Cenelec |
EN 61558-2-9:2003 |
|
|
Safety of power transformers, power supply units and similar products — Part 2-9: Particular requirements for transformers for class III handlamps for tungsten filament lamps (IEC 61558-2-9:2002) |
EN 60742:1995 Note 2.3 |
Date expired (1.12.2005) |
|
Cenelec |
EN 61558-2-12:2001 |
|
|
Safety of power transformers, power supply units and similar devices — Part 2-12: Particular requirements for constant voltage transformers (IEC 61558-2-12:2001) |
None |
— |
|
Cenelec |
EN 61558-2-13:2000 |
|
|
Safety of power transformers, power supply units and similar devices — Part 2-13: Particular requirements for auto-transformers for general use (IEC 61558-2-13:1999) |
None |
— |
|
Cenelec |
EN 61558-2-15:2001 |
|
|
Safety of power transformers, power supply units and similar — Part 2-15: Particular requirements for isolating transformers for the supply of medical locations (IEC 61558-2-15:1999 (Modified)) |
None |
— |
|
Cenelec |
EN 61558-2-17:1997 |
|
|
Safety of power transformers, power supply units and similar — Part 2-17: Particular requirements for transformers for switch mode power supplies (IEC 61558-2-17:1997) |
None |
— |
|
Cenelec |
EN 61558-2-19:2001 |
|
|
Safety of power transformers, power supply units and similar devices — Part 2-19: Particular requirements for perturbation attenuation transformers (IEC 61558-2-19:2000) |
None |
— |
|
Cenelec |
EN 61558-2-20:2000 |
|
|
Safety of power transformers, power supply units and similar devices — Part 2-20: Particular requirements for small reactors (IEC 61558-2-20:2000) |
None |
— |
|
Cenelec |
EN 61558-2-23:2000 |
|
|
Safety of power transformers, power supply units and similar devices — Part 2-23: Particular requirements for transformers for construction sites (IEC 61558-2-23:2000) |
None |
— |
|
Cenelec |
EN 61643-11:2002 |
|
|
Low-voltage surge protective devices — Part 11: Surge protective devices connected to low-voltage power systems — Requirements and tests (IEC 61643-1:1998 (Modified)) |
None |
— |
|
Amendment A11:2007 to EN 61643-11:2002 |
Note 3 |
1.7.2009 |
|
Cenelec |
EN 61643-21:2001 |
|
|
Low voltage surge protective devices — Part 21: Surge protective devices connected to telecommunications and signalling networks — Performance requirements and testing methods (IEC 61643-21:2000) |
None |
— |
|
Cenelec |
EN 61730-1:2007 |
|
|
Photovoltaic (PV) module safety qualification — Part 1: Requirements for construction (IEC 61730-1:2004 (Modified)) |
None |
— |
|
Cenelec |
EN 61730-2:2007 |
|
|
Photovoltaic (PV) module safety qualification — Part 2: Requirements for testing (IEC 61730-2:2004 (Modified)) |
None |
— |
|
Cenelec |
EN 61770:1999 |
|
|
Electric appliances connected to the water mains — Avoidance of backsiphonage and failure of hose-sets (IEC 61770:1998) |
EN 50084:1992 + A1:1998 Note 2.1 |
Date expired (1.4.2002) |
|
Amendment A1:2004 to EN 61770:1999 (IEC 61770:1998/A1:2004) |
Note 3 |
Date expired (1.3.2007) |
|
Amendment A2:2006 to EN 61770:1999 (IEC 61770:1998/A2:2006) |
Note 3 |
1.4.2009 |
|
Cenelec |
EN 61800-5-1:2003 |
|
|
Adjustable speed electrical power drive systems — Part 5-1: Safety requirements — Electrical, thermal and energy (IEC 61800-5-1:2003) |
None |
— |
|
Cenelec |
EN 61800-5-1:2007 |
|
|
Adjustable speed electrical power drive systems — Part 5-1: Safety requirements — Electrical, thermal and energy (IEC 61800-5-1:2007) |
EN 61800-5-1:2003 Note 2.1 |
1.8.2010 |
|
Cenelec |
EN 61812-1:1996 |
|
|
Specified time relays for industrial use — Part 1: Requirements and tests (IEC 61812-1:1996) |
None |
— |
|
Amendment A11:1999 to EN 61812-1:1996 |
Note 3 |
Date expired (1.1.2002) |
|
Cenelec |
EN 61851-1:2001 |
|
|
Electric vehicle conductive charging system — Part 1: General requirements (IEC 61851-1:2001) |
None |
— |
|
Cenelec |
EN 61851-21:2002 |
|
|
Electric vehicle conductive charging system — Part 21: Electric vehicle requirements for conductive connection to an a.c/d.c. supply (IEC 61851-21:2001) |
None |
— |
|
Cenelec |
EN 61851-22:2002 |
|
|
Electric vehicle conductive charging system — Part 22: AC electric vehicle charging station (IEC 61851-22:2001) |
None |
— |
|
Cenelec |
EN 61921:2003 |
|
|
Power capacitors — Low-voltage power factor correction banks (IEC 61921:2003) |
None |
— |
|
Cenelec |
EN 62020:1998 |
|
|
Electrical accessories — Residual current monitors for household and similar uses (RCMs) (IEC 62020:1998) |
None |
— |
|
Amendment A1:2005 to EN 62020:1998 (IEC 62020:1998/A1:2003 (Modified)) |
Note 3 |
Date expired (1.3.2008) |
|
Cenelec |
EN 62026-1:2007 |
|
|
Low-voltage switchgear and controlgear — Controller-device interfaces (CDIs) — Part 1: General rules (IEC 62026-1:2007) |
None |
— |
|
Cenelec |
EN 62035:2000 |
|
|
Discharge lamps (excluding fluorescent lamps) — Safety specifications (IEC 62035:1999 (Modified)) |
None |
— |
|
Amendment A1:2003 to EN 62035:2000 (IEC 62035:1999/A1:2003 (Modified)) |
Note 3 |
Date expired (1.10.2006) |
|
Cenelec |
EN 62040-1-1:2003 |
|
|
Uninterruptible power systems (UPS) — Part 1-1: General and safety requirements for UPS used in operator access areas (IEC 62040-1-1:2002) |
EN 50091-1-1:1996 Note 2.1 |
Date expired (1.11.2005) |
|
Cenelec |
EN 62040-1-2:2003 |
|
|
Uninterruptible power systems (UPS) — Part 1-2: General and safety requirements for UPS used in restricted access locations (IEC 62040-1-2:2002) |
EN 50091-1-2:1998 Note 2.1 |
Date expired (1.11.2005) |
|
Cenelec |
EN 62094-1:2003 |
|
|
Indicator light units for household and similar fixed-electrical installations — Part 1: General requirements (IEC 62094-1:2002) |
None |
— |
|
Amendment A11:2003 to EN 62094-1:2003 |
Note 3 |
Date expired (1.7.2006) |
|
Cenelec |
EN 62135-2:2008 |
|
|
Resistance welding equipment — Part 2: Electromagnetic compatibility (EMC) requirements (IEC 62135-2:2007) |
None |
— |
|
Cenelec |
EN 62196-1:2003 |
|
|
Plugs, socket-outlets, vehicle couplers and vehicle inlets — Conductive charging of electric vehicles — Part 1: Charging of electric vehicles up to 250 A a.c. and 400 A d.c. (IEC 62196-1:2003) |
None |
— |
|
Cenelec |
EN 62208:2003 |
|
|
Empty enclosures for low-voltage switchgear and controlgear assemblies — General requirements (IEC 62208:2002) |
EN 50298:1998 Note 2.1 |
Date expired (1.12.2006) |
|
Cenelec |
EN 62282-3-3:2008 |
|
|
Fuel cell technologies — Part 3-3: Stationary fuel cell power systems — Installation (IEC 62282-3-3:2007) |
None |
— |
|
Cenelec |
EN 62310-1:2005 |
|
|
Static transfer systems (STS) — Part 1: General and safety requirements (IEC 62310-1:2005) |
None |
— |
|
Cenelec |
EN 62311:2008 |
|
|
Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz-300 GHz) (IEC 62311:2007 (Modified)) |
None |
— |
|
Cenelec |
EN 62395-1:2006 |
|
|
Electrical resistance trace heating systems for industrial and commercial applications — Part 1: General and testing requirements (IEC 62395-1:2006) |
None |
— |
|
Cenelec |
HD 21.1 S4:2002 |
|
|
Cables of rated voltages up to and including 450/750 V and having thermoplastic insulation — Part 1: General requirements |
HD 21.1 S3:1997 Note 2.1 |
Date expired (1.9.2003) |
|
Cenelec |
HD 21.2 S3:1997 |
|
|
Cables of rated voltages up to and including 450/750 V and having thermoplastic insulation — Part 2: Test methods |
HD 21.2 S2:1990 + A2:1990 + A3:1993 + A4:1993 + A6:1995 + A11:1995 + A13:1995 Note 2.1 |
Date expired (1.6.1999) |
|
Amendment A1:2002 to HD 21.2 S3:1997 |
Note 3 |
Date expired (1.9.2003) |
|
Cenelec |
HD 21.3 S3:1995 |
|
|
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V — Part 3: Non-sheathed cables for fixed wiring (IEC 60227-3:1993 (Modified)) |
None |
— |
|
Amendment A1:1999 to HD 21.3 S3:1995 |
Note 3 |
Date expired (1.8.2001) |
|
Cenelec |
HD 21.4 S2:1990 |
|
|
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V — Part 4: Sheathed cables for fixed wiring (IEC 60227-4:1979 (Modified)) |
None Note 2.1 |
— |
|
Cenelec |
HD 21.5 S3:1994 |
|
|
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V — Part 5: Flexible cables (cords) (IEC 60227-5:1979 (Modified)) |
None |
— |
|
Amendment A1:1999 to HD 21.5 S3:1994 |
Note 3 |
Date expired (1.8.2001) |
|
Amendment A2:2001 to HD 21.5 S3:1994 |
Note 3 |
Date expired (1.4.2003) |
|
Cenelec |
HD 21.7 S2:1996 |
|
|
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V — Part 7: Single core non-sheathed cables for internal wiring for a conductor temperature of 90 °C |
HD 21.7 S1:1990 + A1:1992 + A2:1993 Note 2.1 |
Date expired (1.9.1997) |
|
Amendment A1:1999 to HD 21.7 S2:1996 |
Note 3 |
Date expired (1.8.2001) |
|
Cenelec |
HD 21.8 S2:1999 |
|
|
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V — Part 8: Single core non-sheathed cables for decorative chains |
HD 21.8 S1:1990 + A2:1994 Note 2.1 |
Date expired (1.8.2001) |
|
Cenelec |
HD 21.9 S2:1995 |
|
|
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V — Part 9: Single core non-sheathed cable for installation at low temperatures |
None |
— |
|
Amendment A1:1999 to HD 21.9 S2:1995 |
Note 3 |
Date expired (1.8.2001) |
|
Cenelec |
HD 21.10 S2:2001 |
|
|
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V — Part 10: Extensible leads |
HD 21.10 S1:1993 Note 2.1 |
Date expired (1.8.2003) |
|
Cenelec |
HD 21.11 S1:1995 |
|
|
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V — Part 11: Cables for luminaires |
None |
— |
|
Amendment A1:2001 to HD 21.11 S1:1995 |
Note 3 |
Date expired (1.8.2003) |
|
Cenelec |
HD 21.12 S1:1994 |
|
|
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V — Part 12: Heat-resistant flexible cables (cords) |
None |
— |
|
Amendment A1:2001 to HD 21.12 S1:1994 |
Note 3 |
Date expired (1.8.2003) |
|
Cenelec |
HD 21.13 S1:1995 |
|
|
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V — Part 13: Oil resistant PVC sheathed cables with two or more conductors |
None |
— |
|
Amendment A1:2001 to HD 21.13 S1:1995 |
Note 3 |
Date expired (1.8.2003) |
|
Cenelec |
HD 21.14 S1:2003 |
|
|
Cables of rated voltage up to and including 450/750 V and having thermoplastic insulation — Part 14: Flexible cables (cords), insulated and sheathed with halogen-free thermoplastic compounds |
None |
— |
|
Cenelec |
HD 21.15 S1:2006 |
|
|
Cables of rated voltages up to and including 450/750 V and having thermoplastic insulation — Part 15: Single core cables, insulated with halogen-free thermoplastic compound, for fixed wiring |
None |
— |
|
Cenelec |
HD 22.1 S4:2002 |
|
|
Cables of rated voltages up to and including 450/750 V and having cross-linked insulation — Part 1: General requirements |
HD 22.1 S3:1997 Note 2.1 |
Date expired (1.9.2003) |
|
Cenelec |
HD 22.2 S3:1997 |
|
|
Cables of rated voltages up to and including 450/750 V and having cross-linked insulation — Part 2: Test methods |
HD 22.2 S2:1992 + A5:1992 + A6:1992 + A7:1992 + A8:1993 + A9:1993 + A10:1995 + A11:1995 Note 2.1 |
Date expired (1.6.1999) |
|
Amendment A1:2002 to HD 22.2 S3:1997 |
Note 3 |
Date expired (1.9.2003) |
|
Cenelec |
HD 22.3 S4:2004 |
|
|
Cables of rated voltages up to and including 450/750 V and having cross-linked insulation — Part 3: Heat resistant silicone rubber insulated cables |
HD 22.3 S3:1995 + A1:1999 Note 2.1 |
Date expired (1.2.2006) |
|
Amendment A1:2006 to HD 22.3 S4:2004 |
Note 3 |
Date expired (1.12.2007) |
|
Cenelec |
HD 22.4 S4:2004 |
|
|
Cables of rated voltages up to and including 450/750 V and having cross-linked insulation — Part 4: Cords and flexible cables |
HD 22.4 S3:1995 + A1:1999 + A2:2002 Note 2.1 |
Date expired (1.2.2006) |
|
Cenelec |
HD 22.6 S2:1995 |
|
|
Cables of rated voltages up to and including 450/750 V and having cross-linked insulation — Part 6: Arc welding cables |
HD 22.6 S1:1990 Note 2.1 |
Date expired (1.7.1997) |
|
Amendment A1:1999 to HD 22.6 S2:1995 |
Note 3 |
Date expired (1.6.2000) |
|
Amendment A2:2004 to HD 22.6 S2:1995 |
Note 3 |
Date expired (1.2.2006) |
|
Cenelec |
HD 22.7 S2:1995 |
|
|
Cables of rated voltages up to and including 450/750 V and having cross-linked insulation — Part 7: Cables with increased heat resistance for internal wiring for a conductor temperature of 110 °C |
HD 22.7 S1:1992 Note 2.1 |
Date expired (1.7.1997) |
|
Amendment A1:1999 to HD 22.7 S2:1995 |
Note 3 |
Date expired (1.6.2000) |
|
Amendment A2:2004 to HD 22.7 S2:1995 |
Note 3 |
Date expired (1.2.2006) |
|
Cenelec |
HD 22.8 S2:1994 |
|
|
Cables of rated voltages up to and including 450/750 V and having cross-linked insulation — Part 8: Polychloroprene or equivalent synthetic elastomer sheathed cable for decorative chains |
None |
— |
|
Amendment A1:1999 to HD 22.8 S2:1994 |
Note 3 |
Date expired (1.6.2000) |
|
Amendment A2:2004 to HD 22.8 S2:1994 |
Note 3 |
Date expired (1.2.2006) |
|
Cenelec |
HD 22.9 S2:1995 |
|
|
Rubber insulated cables of rated voltages up to and including 450/750 V — Part 9: Single core non-sheathed cables for fixed wiring having low emission of smoke and corrosive gases |
HD 22.9 S1:1992 Note 2.1 |
Date expired (1.7.1997) |
|
Amendment A1:1999 to HD 22.9 S2:1995 |
Note 3 |
Date expired (1.6.2000) |
|
Cenelec |
HD 22.9 S3:2007 |
|
|
Cables of rated voltages up to and including 450/750 V and having cross-linked insulation — Part 9: Single core halogen-free non-sheathed cables for fixed wiring having low emission of smoke |
HD 22.9 S2:1995 and its amendment Note 2.1 |
1.12.2008 |
|
Cenelec |
HD 22.10 S1:1994 |
|
|
Rubber insulated cables of rated voltages up to and including 450/750 V — Part 10: EPR insulated and polyurethane sheathed flexible cable |
None |
— |
|
Amendment A1:1999 to HD 22.10 S1:1994 |
Note 3 |
Date expired (1.6.2000) |
|
Cenelec |
HD 22.10 S2:2007 |
|
|
Cables of rated voltages up to and including 450/750 V and having cross-linked insulation — Part 10: EPR insulated and polyurethane sheathed flexible cables |
HD 22.10 S1:1994 and its amendment Note 2.1 |
1.12.2008 |
|
Cenelec |
HD 22.11 S1:1995 |
|
|
Rubber insulated cables of rated voltages up to and including 450/750 V — Part 11: EVA cords and flexible cables |
None |
— |
|
Amendment A1:1999 to HD 22.11 S1:1995 |
Note 3 |
Date expired (1.6.2000) |
|
Cenelec |
HD 22.11 S2:2007 |
|
|
Cables of rated voltages up to and including 450/750 V and having cross-linked insulation — Part 11: EVA cords and flexible cables |
HD 22.11 S1:1995 and its amendment Note 2.1 |
1.12.2008 |
|
Cenelec |
HD 22.12 S1:1996 |
|
|
Rubber insulated cables of rated voltages up to and including 450/750 V — Part 12: Heat resistant EPR cords and flexible cables |
None |
— |
|
Amendment A1:1999 to HD 22.12 S1:1996 |
Note 3 |
Date expired (1.6.2000) |
|
Cenelec |
HD 22.12 S2:2007 |
|
|
Cables of rated voltages up to and including 450/750 V and having cross-linked insulation — Part 12: Heat resistant EPR cords and flexible cables |
HD 22.12 S1:1996 and its amendment Note 2.1 |
1.12.2008 |
|
Cenelec |
HD 22.13 S1:1996 |
|
|
Rubber insulated cables of rated voltages up to and including 450/750 V — Part 13: Single and multicore flexible cables, insulated and sheathed with crosslinked polymer and having low emission of smoke and corrosive gases |
None |
— |
|
Amendment A1:2000 to HD 22.13 S1:1996 |
Note 3 |
Date expired (1.8.2001) |
|
Cenelec |
HD 22.13 S2:2007 |
|
|
Cables of rated voltages up to and including 450/750 V and having cross-linked insulation — Part 13: Halogen-free flexible cables having low emission of smoke |
HD 22.13 S1:1996 and its amendment Note 2.1 |
1.12.2008 |
|
Cenelec |
HD 22.14 S2:2002 |
|
|
Cables of rated voltages up to and including 450/750 V and having cross-linked insulation — Part 14: Cords for applications requiring high flexibility |
HD 22.14 S1:1995 + A1:1999 Note 2.1 |
Date expired (1.9.2003) |
|
Cenelec |
HD 22.14 S3:2007 |
|
|
Cables of rated voltages up to and including 450/750 V and having cross-linked insulation — Part 14: Cords for applications requiring high flexibility |
HD 22.14 S2:2002 Note 2.1 |
1.12.2008 |
|
Cenelec |
HD 22.15 S1:1999 |
|
|
Rubber insulated cables of rated voltages up to and including 450/750 V — Part 15: Multicore cables insulated and sheathed with heat resistant silicone rubber |
None |
— |
|
Cenelec |
HD 22.15 S2:2007 |
|
|
Cables of rated voltages up to and including 450/750 V and having cross-linked insulation — Part 15: Multicore cables insulated and sheathed with heat resistant silicone rubber |
HD 22.15 S1:1999 Note 2.1 |
1.12.2008 |
|
Cenelec |
HD 22.16 S1:2000 |
|
|
Rubber insulated cables of rated voltages up to and including 450/750 V — Part 16: Water resistant polychloroprene or equivalent synthetic elastomer sheathed cables |
None |
— |
|
Cenelec |
HD 22.16 S2:2007 |
|
|
Cables of rated voltages up to and including 450/750 V and having cross-linked insulation — Part 16: Water resistant polychloroprene or equivalent synthetic elastomer sheathed cables |
HD 22.16 S1:2000 Note 2.1 |
1.12.2008 |
|
Cenelec |
HD 308 S2:2001 |
|
|
Identification of cores in cables and flexible cords |
HD 308 S1:1976 Note 2.1 |
Date expired (1.4.2006) |
|
Cenelec |
HD 359 S2:1990 |
|
|
Flat polyvinylchloride sheathed lift cables |
None |
— |
|
Cenelec |
HD 361 S3:1999 |
|
|
System for cable designation |
None |
— |
|
Amendment A1:2006 to HD 361 S3:1999 |
Note 3 |
1.6.2009 |
|
Cenelec |
HD 368 S1:1978 |
|
|
Direct acting recording electrical measuring instruments and their accessories (IEC 60258:1968 + A1:1976) |
None |
— |
|
Cenelec |
HD 516 S2:1997 |
|
|
Guide to use of low voltage harmonized cables |
None |
— |
|
Amendment A1:2003 to HD 516 S2:1997 |
Note 3 |
Date expired (1.2.2005) |
|
Cenelec |
HD 549 S1:1989 |
|
|
Conference systems — Electrical and audio requirements (IEC 60914:1988) |
None |
— |
|
Cenelec |
HD 597 S1:1992 |
|
|
Coupling capacitors and capacitor dividers (IEC 60358:1990) |
None |
— |
|
Cenelec |
HD 603 S1:1994 |
|
|
Distribution cables of rated voltage 0,6/1 kV |
None |
— |
|
Amendment A1:1997 to HD 603 S1:1994 |
Note 3 |
Date expired (1.9.1998) |
|
Amendment A2:2003 to HD 603 S1:1994 |
Note 3 |
Date expired (1.2.2006) |
|
Amendment A3:2007 to HD 603 S1:1994 |
Note 3 |
1.11.2009 |
|
Cenelec |
HD 604 S1:1994 |
|
|
0,6/1 kV and 1,9/3,3 kV power cables with special fire performance for use in power stations |
None |
— |
|
Amendment A1:1997 to HD 604 S1:1994 |
Note 3 |
Date expired (1.12.1997) |
|
Amendment A2:2002 to HD 604 S1:1994 |
Note 3 |
Date expired (1.7.2005) |
|
Amendment A3:2005 to HD 604 S1:1994 |
Note 3 |
Date expired (1.6.2008) |
|
Cenelec |
HD 605 S1:1994 |
|
|
Electric cables — Additional test methods |
None |
— |
|
Amendment A1:1996 to HD 605 S1:1994 |
Note 3 |
Date expired (1.12.1996) |
|
Amendment A2:2001 to HD 605 S1:1994 |
Note 3 |
Date expired (1.1.2003) |
|
Amendment A3:2002 to HD 605 S1:1994 |
Note 3 |
Date expired (1.12.2004) |
|
Amendment A4:2004 to HD 605 S1:1994 |
Note 3 |
Date expired (1.4.2005) |
|
Cenelec |
HD 626 S1:1996 |
|
|
Overhead distribution cables of rated voltage Uo/Um (Um): 0,6/1 (1,2) kV |
None |
— |
|
Amendment A1:1997 to HD 626 S1:1996 |
Note 3 |
Date expired (1.12.1997) |
|
Amendment A2:2002 to HD 626 S1:1996 |
Note 3 |
Date expired (1.8.2003) |
|
Cenelec |
HD 627 S1:1996 |
|
|
Multicore and multipair cables for installation above and below ground |
None |
— |
|
Amendment A1:2000 to HD 627 S1:1996 |
Note 3 |
Date expired (1.8.2001) |
|
Amendment A2:2005 to HD 627 S1:1996 |
Note 3 |
Date expired (1.6.2008) |
|
Cenelec |
HD 639 S1:2002 |
|
|
Electrical accessories — Portable residual current devices without integral overcurrent protection for household and similar use (PRCDs) (IEC 61540:1997 (Modified) + A1:1998 (Modified)) |
None |
— |
|
Amendment A1:2003 to HD 639 S1:2002 |
Note 3 |
Date expired (1.6.2005) |
|
Cenelec |
HD 60269-2:2007 |
|
|
Low-voltage fuses — Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) — Examples of standardized systems of fuses A to I (IEC 60269-2:2006 (Modified)) |
EN 60269-2:1995 and its amendments + HD 60269-2-1:2005 Note 2.1 |
1.3.2010 |
|
Cenelec |
HD 60269-2-1:2005 |
|
|
Low-voltage fuses — Part 2-1: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) — Sections I to VI: Examples of types of standardized fuses (IEC 60269-2-1:2004 (Modified)) |
HD 630.2.1 S6:2003 Note 2.1 |
Date expired (1.4.2008) |
|
Cenelec |
HD 60269-3:2007 |
|
|
Low-voltage fuses — Part 3: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household or similar applications) — Examples of standardized systems of fuses A to F (IEC 60269-3:2006 (Modified)) |
EN 60269-3:1995 and its amendment + HD 60269-3-1:2004 Note 2.1 |
1.3.2010 |
|
Cenelec |
HD 60269-3-1:2004 |
|
|
Low-voltage fuses — Part 3-1: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household and similar applications) — Sections I to IV: Examples of types of standardized fuses (IEC 60269-3-1:2004 (Modified)) |
HD 630.3.1 S1:1996 + HD 630.3.1 S2:1997 + HD 630.3.1 S3:2002 Note 2.1 |
Date expired (1.11.2007) |
Note 1: |
Generally the date of cessation of presumption of conformity will be the date of withdrawal (‘dow’), set by the European Standardisation Organisation, but attention of users of these standards is drawn to the fact that in certain exceptional cases this can be otherwise. |
Note 2.1: |
The new (or amended) standard has the same scope as the superseded standard. On the date stated, the superseded standard ceases to give presumption of conformity with the essential requirements of the directive. |
Note 2.2: |
The new standard has a broader scope than the superseded standard. On the date stated the superseded standard ceases to give presumption of conformity with the essential requirements of the directive. |
Note 2.3: |
The new standard has a narrower scope than the superseded standard. On the date stated the (partially) superseded standard ceases to give presumption of conformity with the essential requirements of the directive for those products that fall within the scope of the new standard. Presumption of conformity with the essential requirements of the directive for products that still fall within the scope of the (partially) superseded standard, but that do not fall within the scope of the new standard, is unaffected. |
Note 3: |
In case of amendments, the referenced standard is EN CCCCC:YYYY, its previous amendments, if any, and the new, quoted amendment. The superseded standard (column 3) therefore consists of EN CCCCC:YYYY and its previous amendments, if any, but without the new quoted amendment. On the date stated, the superseded standard ceases to give presumption of conformity with the essential requirements of the directive. |
Example: For EN 50065-4-2:2001, the following applies:
Cenelec |
EN 50065-4-2:2001 |
|
|
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz and 1,6 MHz to 30 MHz — Part 4-2: Low voltage decoupling filters — Safety requirements [The referenced standard is EN 50065-4-2:2001] |
None [There is no superseded standard] |
— |
|
Amendment A1:2003 to EN 50065-4-2:2001 [The referenced standard is EN 50065-4-2:2001 + A1:2003 to EN 50065-4-2:2001] |
Note 3 [The superseded standard is EN 50065-4-2:2001] |
Date expired (1.12.2005) |
|
Amendment A2:2005 to EN 50065-4-2:2001 [The referenced standard is EN 50065-4-2:2001 + A1:2003 to EN 50065-4-2:2001 + A2:2005 to EN 50065-4-2:2001] |
Note 3 [The superseded standard is EN 50065-4-2:2001 + A1:2003 to EN 50065-4-2:2001] |
Date expired (1.3.2008) |
Note 4: |
The EN 60061-1, -2, -3, and -4 series have a particular structure and therefore the date of cessation of presumption of conformity indicated only affects the types modified by the different amendments. |
Note 9: |
EN 60335-2-9:2003 covers the safety objectives of directive 2006/95/EC only if, in conjunction, Commission Opinion 2000/C 104/07 is taken into account. |
Note 11: |
EN 61242:1997 covers the safety objectives of directive 2006/95/EC only if, in conjunction, Commission Opinion 2003/C 297/06 is taken into account. |
Note 12: |
EN 60335-2-27:1997 and EN 60335-2-27:2003 cover the safety objectives of directive 2006/95/EC only if, in conjunction, Commission Opinion 2004/C 275/03 is taken into account. |
This list replaces all the previous lists published in the Official Journal of the European Union.
(1) CEN: rue de Stassart/De Stassartstraat 36, B-1050 Brussels, tel: (32-2) 550 08 11, fax: (32-2) 550 08 19 (http://www.cenorm.be)
Cenelec: rue de Stassart/De Stassartstraat 35, B-1050 Brussels, tel: (32-2) 519 68 71, fax: (32-2) 519 69 19 (http://www.cenelec.eu)
ETSI: 650, route des Lucioles, F-06921 Sophia Antipolis, tel: (33) 492 94 42 12, fax: (33) 493 65 47 16 (http://www.etsi.org).