31994D0797

COMMISSION DECISION of 18 November 1994 on a common technical regulation for the pan-European integrated services digital network (ISDN) basic access (94/797/EC)

THE COMMISSION OF THE EUROPEAN COMMUNITIES,

Having regard to the Treaty establishing the European Community,

Having regard to Council Directive 91/263/EEC of 29 April 1991 on the approximation of the laws of the Member States concerning telecommunications terminal equipment, including the mutual recognition of their conformity (1), as amended by Directive 93/68/EEC (2), and in particular Articles 6(2) and 16(4) thereof,

Whereas the Commission has adopted under Council Directive 86/361/EEC (3) the measure identifying the type of terminal equipment for which a common technical regulation is required, together with the associated scope statement;

Whereas this Decision constitutes a bridging measure which is to be reviewed within a period of two years following its adoption due account being taken of the progress made by the relevant standardization body engaged in the preparation of a new harmonized standard implementing the essential requirements applicable;

Whereas during this period it may be necessary to amend this Decision with respect to the harmonized standards identified in this Decision;

Whereas in some Member States, the early national implementations of ISDN may have resulted in justified national variations;

Whereas in order to ensure continuity of access to markets for manufacturers now serving one or more national markets, it is necessary to allow for transitional arrangements regarding the use of national requirements during the period mentioned in this Decision;

Whereas the maximum period mentioned in this Decision should be determined by the finalization by the relevant standardization body of the mandated harmonized standards implementing the essential requirements applicable;

Whereas the common technical regulation adopted in this Decision is in accordance with the opinion of the Approvals Committee for Terminal Equipment (ACTE),

HAS ADOPTED THIS DECISION:

Article 1

1. This Decision shall apply to terminal equipment intended to be connected to a public telecommunications network and falling within the scope of the harmonized standard identified in Article 2 (1).

2. This Decision establishes a common technical regulation covering the technical characteristics, electrical and mechanical interface requirements, and access control protocol to be provided by terminal equipment which is capable of and intended by the manufacturer, or his representative, for connection to a T, or coincident S and T, reference point for a basic access rate access at an interface to a public telecommunications network presented as a pan-European ISDN (EURO-ISDN) basic access point.

Article 2

1. The common technical regulation shall include the harmonized standard prepared for the corresponding measure adopted under Directive 86/361/EEC, but shall limit itself to the essential requirements referred to in Article 4 (c) to (f) of Directive 91/263/EEC. The reference to the standard is set out in Annex I, of which the applicable part is shown in Annex II.

2. Terminal equipment covered by this Decision shall comply with the common technical regulation referred to in paragraph 1, shall meet the essential requirements referred to in points (a) and (b) of Article 4 of Directive 91/263/EEC, and shall meet the requirements of any other applicable Directives, in particular Council Directives 73/23/EEC (4) and 89/336/EEC (5).

Article 3

Notified bodies designated for carrying out the procedures referred to in Article 9 of Directive 91/263/EEC shall, as regards terminal equipment covered by Article 1 (1) of this Decision, use or ensure the use of the harmonized standard referred to in Annex I except where a justified national variation is applicable during the period referred to in Article 4.

Article 4

The Commission shall examine the experience gained in the application of this Decision and the progress made by the relevant standardization body for the purpose of ensuring the early availability of the relevant harmonized standard which has been adopted by that recognized standardization body. To that end it shall adopt any necessary amendments to this Decision in accordance with the procedures laid down in Directive 91/263/EEC, and it shall adopt a final measure within a maximum period of two years after this Decision has taken effect.

Article 5

This Decision is addressed to the Member States.

Done at Brussels, 18 November 1994.

For the Commission

Martin BANGEMANN

Member of the Commission

(1) OJ No L 128, 23. 5. 1991, p. 1.(2) OJ No L 220, 31. 8. 1993, p. 1.(3) OJ No L 217, 5. 8. 1986, p. 21.(4) OJ No L 77, 26. 3. 1973, p. 29.(5) OJ No L 139, 23. 5. 1989, p. 19.

ANNEX I

Reference to the harmonized standard of which parts are applicable The harmonized standard referred to Article 2 of the Decision is:

NET 3 (ISDN basic access)

OJ No C 53, 24. 2. 1993, p. 6.

Additional information The harmonized standard referred to, NET 3, was adopted under Directive 86/361/EEC.

The full text of NET 3 can be obtained from the following address:

European Telecommunications Standards Institute,

F-06921 Sophia Antipolis Cedex.

ANNEX II

Cross Reference List indicating applicable part of the harmonized standard

Layer 1, NET 3, cross reference list

"" ID="1">D.2.1.1 > ID="2">No TTCN test case > ID="3">9.3.1.1 9.3.1.3 9.3.2 > ID="4">Not TTCN > ID="5">To check the binary organization of INFO 3 frames. "> ID="1">D.2.1.2 > ID="2">No TTCN test case > ID="3">9.2.1 > ID="4">Not TTCN > ID="5">To check the binary organization of INFO 1 frames. "> ID="1">D.3.1.1 > ID="2">DCBinaryOneCL1 > ID="3">9.4.1.1 > ID="4">TTCN > ID="5">To check the D-channel contains the correct interframe time fill from the TE. "> ID="1">D.3.1.2 > ID="2">DCNormalPL1CL1 DCNormalPL0CL1 DCPriorityClass1 DCNormtoLowPLCL1 DCLowtoNormPLCL1 > ID="3">9.4.1.2 9.4.1.3 > ID="4">TTCN > ID="5">To check if the TE detects collisions on the D-channel when transmitting, by means of the D-echo channel and ceases transmission immediately. "> ID="1">D.3.2.1 > ID="2">AD1aF1_PS& LP-on AD1bF10_LP-on AD1cF11_LP-off AD1dF11_PS-on AD2F11_CHK_T3 AD3aF2_PS-off AD3bF2_LP-off AD4F2_RX-I0 AD5F2_RX-I2 AD6F2_RX-I4 AD7F2_RX-IX CPF2PHAI AD8F2_CHK_T3 AD9aF3_PS-off AD9bF3_LP-off AD10F3_PH-AR AD11F3_RX-I0 AD12F3_RX-I2 AD13F3_RX-I4 AD14F3_RX-IX AD15F3_CHK_T3 CPF3MPHIID CPF3PHAI CPF4Tlayer2 AD16aF4_PS-off AD16bF4_LP-off CPF4MPHIID CPF4PHAI CPF4PHDI_T3exp AD17F4_RX-I0 AD18F4_RX-I2 AD19F4_RX-I4 IAD21F4_CHK_T3 AD22aF5_PS-off AD22bF5_LP-off AD23F5_RX-I0 AD24F5_RX-I2 AD25F5_RX-I4 AD26F5_RX-IX > ID="3">9.4.2.3.1 > ID="4">TTCN > ID="5">To check the terminal correctly executes the activation/deactivation procedure. "> ID="1">D.3.2.1 (Continues) > ID="2">AD27F5_CHK_T3 CPF5MPHIID CPF5PHAI CPF5PHDI_I0T3 CPF5PHDI_T3expa CPF5PHDI_T3expb AD28aF6_PS-off AD28bF6_LP-off AD28cF6_PS-off AD29F6_Lostfr AD30F6_PH-AR AD32F6_RX-I2 AD33F6_RX-I4 AD34F6_CHK_T3 CPF6PHAIa CPF6PHAIb CPF6PHDI_T3exp CPF6PHDI_I0T3 CPF6PHDI_I0 CPF6PHARa CPF6PHARb AD35aF7_PS-off AD35bF7_LP-off AD35cF7_PS-off AD36F7_Lostfr AD37F7_RX-I0 AD38F7_RX-I2 AD39F7_RX-I4 CPF7PHDI_I0 AD40aF8_PS-off AD40bF8_LP-off AD41F8_PH-AR AD42F8_RX-I0 AD43F8_RX-I2 AD44F8_RX-I4 AD45F8_RX-IX AD46F8_CHK_T3 CPF8MPHIIDa CPF8MPHIIDb CPF8PHAIb CPF8PHAIc CPF8PHDI_T3exp CPF8PHDI_I0T3 CPF8PHDI_I0b CPF8PHARa CPF8PHARb "> ID="1">D.3.2.1 > ID="2">AD31F6_RX-I0 > ID="3">9.4.2.5 > ID="4">TTCN > ID="5">To check that IUT is brought to state F3 when receiving INFO 0 in state F6. Note: There is a missing reference to AD31F6_RX-I0 in paragraph 9.4.2.5 of draft prTBR 3. "> ID="1">D.3.2.2.1.1 > ID="2">TIF3info2 > ID="3">9.4.2.4 > ID="4">TTCN > ID="5">To check the value of the TE activation times in the deactivated state. "> ID="1">D.3.2.2.1.2 > ID="2">TIF4info2 > ID="3">9.4.2.4 > ID="4">TTCN > ID="5">To check the value of the TE activation times in the waiting for signal state. "> ID="1">D.3.2.2.2.1 > ID="2">TIF3info4 > ID="3">9.4.2.4 > ID="4">TTCN > ID="5">To check the value of the TE activation times in the deactivated state. "> ID="1">D.3.2.2.2.2 > ID="2">TIF4info4 > ID="3">9.4.2.4 > ID="4">TTCN > ID="5">To check the value of the TE activation times in the waiting for signal state. "> ID="1">D.3.2.2.4 > ID="2">TItimerT3 > ID="3">9.4.2.3.2 > ID="4">TTCN > ID="5">To check the value of timer T3. "> ID="1">D.3.2.2.5.1 > ID="2">TIF6physdeact > ID="3">9.4.2.5 > ID="4">TTCN > ID="5">To check the value of the TE deactivation times. "> ID="1">D.3.2.2.5.2 > ID="2">TIF7physdeact > ID="3">9.4.2.5 > ID="4">TTCN > ID="5">To check the value of the TE deactivation times. "> ID="1">D.3.2.2.6.1 > ID="2">TIF7compdeact1 > ID="3">9.4.2.3.1 > ID="4">TTCN > ID="5">To check the value of the timer when leaving state F7 upon reception of INFO 0. "> ID="1">D.3.2.2.6.2 > ID="2">TIF8compdeact1 > ID="3">9.4.2.3.1 > ID="4">TTCN > ID="5">To check the value of the timer when leaving state F8 upon reception of INFO 0. "> ID="1">D.3.3 > ID="2">FAinfA_1fr FAinfB_1fr FAinfD_1fr FAinfA_kfr FAinfB_kfr FAinfD_kfr FAregain > ID="3">9.4.3 > ID="4">TTCN > ID="5">To test the IUT correctly executes the frame alignment procedures. "> ID="1">D.3.4 > ID="2">MUltiframe > ID="3">9.4.4 > ID="4">TTCN > ID="5">To test the IUT correctly executes the multiframing procedures. "> ID="1">D.3.5 > ID="2">BCBinaryOne > ID="3">9.4.5 > ID="4">TTCN > ID="5">To check the contents of all non-assigned B-channels. "> ID="1">D.4.1 > ID="2">No TTCN test case > ID="3">9.2.1 > ID="4">Not TTCN > ID="5">The average frame rate when the TE is transmitting INFO 1 type frames. "> ID="1">D.4.2.1 > ID="2">No TTCN test case > ID="3">9.2.2.2 > ID="4">Not TTCN > ID="5">TE output jitter when transmitting INFO 3 type frames. "> ID="1">D.4.2.2 > ID="2">No TTCN test case > ID="3">9.2.2.3 > ID="4">Not TTCN > ID="5">TE total phase deviation input to output. "> ID="1">D.4.3.1 > ID="2">No TTCN test case > ID="3">9.2.3 > ID="4">Not TTCN > ID="5">Output impedance of the transmitters when transmitting a binary ONE (no signal). "> ID="1">D.4.3.2 > ID="2">No TTCN test case > ID="3">9.2.3 > ID="4">Not TTCN > ID="5">Output impedance of the transmitters when transmitting a binary ZERO. "> ID="1">D.4.3.3 > ID="2">No TTCN test case > ID="3">9.2.3 > ID="4">Not TTCN > ID="5">Output peak current. "> ID="1">D.4.3.4 > ID="2">No TTCN test case > ID="3">9.2.3 > ID="4">Not TTCN > ID="5">Output impedance of the transmitters in the inactive state. "> ID="1">D.4.3.5 > ID="2">No TTCN test case > ID="3">9.2.3 > ID="4">Not TTCN > ID="5">Output peak current. "> ID="1">D.4.4 > ID="2">No TTCN test case > ID="3">9.2.4 > ID="4">Not TTCN > ID="5">Pulse shape and amplitude of isolated transmitted pulses. "> ID="1">D.4.5.1 > ID="2">No TTCN test case > ID="3">9.2.5.1 > ID="4">Not TTCN > ID="5">Pulse amplitude when transmitting a high density pattern. "> ID="1">D.4.5.2 > ID="2">No TTCN test case > ID="3">9.2.5.2 > ID="4">Not TTCN > ID="5">The relative difference in integral Udt for a positive and negative pulse. "> ID="1">D.4.6.1 > ID="2">No TTCN test case > ID="3">9.2.6.1 > ID="4">Not TTCN > ID="5">Voltage, on a 400 ohm test load, to prevent pulses adding when 2 to 8 drivers are in parallel. "> ID="1">D.4.6.2 > ID="2">No TTCN test case > ID="3">9.2.6.2 > ID="4">Not TTCN > ID="5">Voltage on a 5,6 ohm test load, to prevent current flow when two opposite polarity drivers are in parallel. "> ID="1">D.4.7 > ID="2">No TTCN test case > ID="3">9.2.7 > ID="4">Not TTCN > ID="5">Longitudinal Conversion Loss (LCL) (the ratio of longitudinal signal converted to a transverse signal as a result of the unbalance about earth of the terminal output). "> ID="1">D.4.8.1.1 > ID="2">No TTCN test case > ID="3">9.2.8 > ID="4">Not TTCN > ID="5">To test the input impedance of terminals whilst in a deactive state. "> ID="1">D.4.8.1.2 > ID="2">No TTCN test case > ID="3">9.2.8 > ID="4">Not TTCN > ID="5">To test that the input impedance of the receiver when receiving an overvoltage signal is correct. "> ID="1">D.4.8.1.3 > ID="2">No TTCN test case > ID="3">9.2.8 > ID="4">Not TTCN > ID="5">To test the input impedance of TE receivers in the inactive state. "> ID="1">D.4.8.1.4 > ID="2">No TTCN test case > ID="3">9.2.8 > ID="4">Not TTCN > ID="5">To test that the input impedance of the receiver when receiving an overvoltage signal is correct. "> ID="1">D.4.8.2 > ID="2">No TTCN test case > ID="3">9.2.9 > ID="4">Not TTCN > ID="5">Subclause A.8.6.2, ETS 300 012 is designed to correctly test the receivers function in the various wiring configurations. "> ID="1">D.4.8.3 > ID="2">No TTCN test case > ID="3">9.2.10 > ID="4">Not TTCN > ID="5">Longitudinal Conversion Loss (LCL) (the ratio of longitudinal signal converted to a transverse signal as a result of the unbalance about earth of the terminal output). "> ID="1">D.5.1.1.1 > ID="2">No TTCN test case > ID="3">9.5.3.1 > ID="4">Not TTCN > ID="5">To ensure an ACTIVATED TE does not draw excessive power from a normal mode, phantom Power Source 1, whilst in an activated state. "> ID="1">D.5.1.1.2 > ID="2">No TTCN test case > ID="3">9.5.3.1 > ID="4">Not TTCN > ID="5">To ensure the DEACTIVATED TE does not draw excessive power from a normal mode, phantom Power Source 1. "> ID="1">D.5.1.1.3 > ID="2">No TTCN test case > ID="3">9.5.3.1 > ID="4">Not TTCN > ID="5">To ensure a DEACTIVATED TE does not draw excessive power from a normal mode, phantom Power Source 1, whilst in local action. "> ID="1">D.5.1.1.4 > ID="2">No TTCN test case > ID="3">9.5.3.1 > ID="4">Not TTCN > ID="5">To ensure a LOCALLY POWERED TE does not consume excessive power from PS1. "> ID="1">D.5.1.2.1 > ID="2">No TTCN test case > ID="3">9.5.3.2.1 9.5.3.2.2 > ID="4">Not TTCN > ID="5">To ensure an ACTIVATED designated TE does not consume excessive power from PS1. "> ID="1">D.5.1.2.2 > ID="2">No TTCN test case > ID="3">9.5.3.2.1 9.5.3.2.2 > ID="4">Not TTCN > ID="5">To ensure a DEACTIVATED designated TE does not consume excessive power from PS1. "> ID="1">D.5.1.2.3 > ID="2">No TTCN test case > ID="3">9.5.3.2.1 9.5.3.2.2 > ID="4">Not TTCN > ID="5">To ensure a DEACTIVATED designated TE does not consume excessive power from PS1 during a local action. "> ID="1">D.5.1.2.4 > ID="2">No TTCN test case > ID="3">9.5.3.2.1 9.5.3.2.2 > ID="4">Not TTCN > ID="5">To ensure that a locally powered TE, in any state does not consume excessive power from PS1 (restricted). "> ID="1">D.5.1.2.6 > ID="2">No TTCN test case > ID="3">9.5.3.2.1 9.5.3.2.2 > ID="4">Not TTCN > ID="5">To ensure a non designated TE does not consume excessive power from PS1 in any state. "> ID="1">D.5.1.3 > ID="2">No TTCN test case > ID="3">9.5.2 > ID="4">Not TTCN > ID="5">To test the rate of change of the current drawn by a TE when the TE is varying its power consumption. This may be caused by changing the state, by some local actions or by some TE typical services. "> ID="1">D.5.1.4.1 > ID="2">No TTCN test case > ID="3">9.5.5.1.1 9.5.5.1.2 > ID="4">Not TTCN > ID="5">To test the behaviour of current over time when connecting to PS1 in normal and restricted mode. "> ID="1">D.5.1.4.2 > ID="2">No TTCN test case > ID="3">9.5.5.1.3 > ID="4">Not TTCN > ID="5">To test the sink current of a non - case designated or local powered TE from the phantom in restricted mode when connecting to the S-Bus. "> ID="1">D.5.1.4.3 > ID="2">No TTCN test case > ID="3">9.5.5.1.4 > ID="4">Not TTCN > ID="5">To test the connection detector when disconnecting. "> ID="1">D.5.1.4.4.1 > ID="2">No TTCN test case > ID="3">9.5.5.2.1 > ID="4">Not TTCN > ID="5">To test the behaviour of TE input voltage over time after removal of short-circuit. "> ID="1">D.5.1.4.4.2 > ID="2">No TTCN test case > ID="3">9.5.5.2.1 > ID="4">Not TTCN > ID="5">To test the power start-up of a TE when connected to Power Source 1 normal at low voltage. "> ID="1">D.5.1.4.5.1 > ID="2">No TTCN test case > ID="3">9.5.5.2.2 > ID="4">Not TTCN > ID="5">To ensure that an IUT does not lose an ongoing communcation when the provision of power in normal power mode is interrupted. "> ID="1">D.5.1.4.5.2 > ID="2">No TTCN test case > ID="3">9.5.5.2.2 > ID="4">Not TTCN > ID="5">To ensure that a IUT does not lose an ongoing communication when the provision of power in restricted power mode is interrupted. "> ID="1">D.5.1.4.6.1 > ID="2">No TTCN test case > ID="3">9.5.5.2.3 > ID="4">Not TTCN > ID="5">To check the reaction of an IUT under normal power condition, when the mode changes from normal to restricted mode. "> ID="1">D.5.1.4.6.2 > ID="2">No TTCN test case > ID="3">9.5.5.2.3 > ID="4">Not TTCN > ID="5">To check the reaction of power consumption of an IUT after change from restricted to normal mode. "> ID="1">D.5.1.4.7 > ID="2">No TTCN test case > ID="3">9.5.5.3.1 > ID="4">Not TTCN > ID="5">To test the DC unbalance of the receiver and transmitter circuit. "> ID="1">D.5.1.4.8 > ID="2">No TTCN test case > ID="3">9.5.5.3.2 > ID="4">Not TTCN > ID="5">To test the impedance of the receiver and transmitter when a direct current unbalance is applied. "">

Layer 2, NET 3, cross reference list

"" ID="1">A.2.2.1.1 > ID="2">TC24004 > ID="3">10.6.1.2 > ID="4">TTCN > ID="5">Tests the normal initialization of multiple-frame operation. "> ID="1">A.2.2.1.3 > ID="2">TC25002 > ID="3">10.6.1.2 > ID="4">TTCN > ID="5">To test that terminal takes appropriate action if the data link connection cannot be initialized, e.g. in case of the unavailability of resources at the network side. "> ID="1">A.2.2.1.4 > ID="2">TC25005 > ID="3">10.6.1.3 > ID="4">TTCN > ID="5">Test the terminals response to the inability of the network to respond to requests to initialize the data link and to ensure that the TE under test tries only N200+1 times to initialize the data link. "> ID="1">A.2.2.1.5 > ID="2">TC27022 > ID="3">10.8 > ID="4">TTCN > ID="5">To ensure correct data link reset by the terminal. "> ID="1">A.2.2.2.2 > ID="2">TC27003 > ID="3">10.7.1 10.7.2 10.7.2.2 10.7.3 > ID="4">TTCN > ID="5">Tests the operation layer 2 sequence numbering. Since there are 128 sequence numbers the test program should cycle through this number of information frame transfers. "> ID="1">A.2.2.2.3 > ID="2">TC27004 > ID="3">10.7.3 > ID="4">TTCN > ID="5">To test that the terminal correctly accepts an 'I' command frame as valid response to an 'I' command frame which it has transmitted. "> ID="1">A.2.2.2.4 > ID="2">TC28012 > ID="3">10.7.2 > ID="4">TTCN > ID="5">Ensures that whilst in the timer recovery state the terminal is able to receive I-frames. "> ID="1">A.2.2.3.1 > ID="2">TC27012 > ID="3">10.6.2 > ID="4">TTCN > ID="5">Tests the normal data link disconnection sequences. "> ID="1">A.2.2.4.1 > ID="2">TC27058 > ID="3">10.9.2 > ID="4">TTCN > ID="5">Tests the layer 2 FCS check mechanism. "> ID="1">A.2.2.4.2 > ID="2">TC27015 > ID="3">10.7.6 > ID="4">TTCN > ID="5">Tests the layer 2 recovery mechanism of the TE in the event of I-frame loss. "> ID="1">A.2.2.4.3 > ID="2">TC27019 > ID="3">10.7.6 > ID="4">TTCN > ID="5">Test layer 2 recovery mechanism in the event of RR-frame loss. "> ID="1">A.2.2.4.4 (b) > ID="2">TC27027 > ID="3">10.9.1 > ID="4">TTCN > ID="5">Test layer 2 recovery mechanism in the event of RR-frame loss. "> ID="1">A.2.2.5.1 > ID="2">TC27404 > ID="3">10.7.5 > ID="4">TTCN > ID="5">To ensure correct handling of peer busy condition. (Frame numbers 1, 4 to 9) "> ID="1">A.2.2.5.1 > ID="2">TC28406 > ID="3">10.7.1 10.7.2 > ID="4">TTCN > ID="5">To ensure correct handling of peer busy conditions. (Frame numbers 1 to 3) "> ID="1">A.2.2.7.1 > ID="2">TC14002 > ID="3">10.5.3.2 > ID="4">TTCN > ID="5">Tests the allocation of TEIs using management procedures and tests that the terminal shall perform TEI check on a check request message for a specific TEI value. "> ID="1">A.2.2.7.2 > ID="2">TC13008 > ID="3">10.5.2.1 > ID="4">TTCN > ID="5">To test the terminals response to a TEI denied frame. "> ID="1">A.2.2.7.3 > ID="2">TC14001 > ID="3">10.4.1 10.4.2 10.5.3.2 > ID="4">TTCN > ID="5">Checks the terminal shall perform TEI check on request from ET. "> ID="1">A.2.2.7.4 > ID="2">TC13010 > ID="3">10.5.2.1 > ID="4">TTCN > ID="5">Check whether the IUT after N202 unsuccessful attempts to acquire a TEI value makes no further attempts. "> ID="1">A.2.2.8.1.1 > ID="2">TC24020 > ID="3">10.9.2 > ID="4">TTCN > ID="5">Ensures that the terminal does not accept frames containing an invalid address and that, on receipt of such a frame, it takes no action. "> ID="1">A.2.2.8.4.1 > ID="2">TC27028 > ID="3">10.9.1 > ID="4">TTCN > ID="5">Ensures that the terminal shall transmit a REJ-frame in response to an out of sequence I-frame. "> ID="1">A.2.2.8.4.2 > ID="2">TC27011 > ID="3">10.7.4 > ID="4">TTCN > ID="5">Ensures that on receipt of a REJ-frame the terminal retransmits the appropriate I-frame. "> ID="1">A.2.2.8.4.3 > ID="2">TC28005 > ID="3">10.7.4 10.7.6 > ID="4">TTCN > ID="5">Ensures that on receipt of a REJ-frame during the timer recovery condition the terminal retransmits the appropriate I-frame. "> ID="1">A.2.2.8.5.1 (a) > ID="2">TC27040 > ID="3">10.9.3 > ID="4">TTCN > ID="5">Ensures that the terminal resets the data link on receipt of a frame with an invalid N(R) value. (N(R) is valid in the range V(A) & le; N(R) & le; V(S)). "> ID="1">A.2.2.8.5.1 (b) > ID="2">TC27043 > ID="3">10.9.3 > ID="4">TTCN > ID="5">Ensures that the terminal resets the data link on receipt of a frame with an invalid N(R) value. (N(R) is valid in the range V(A) & le; N(R) & le; V(S)). "> ID="1">A.2.2.8.5.1 (c) > ID="2">TC27046 > ID="3">10.9.3 > ID="4">TTCN > ID="5">Ensures that the terminal resets the data link on receipt of a frame with an invalid N(R) value. (N(R) is valid in the range V(A) & le; N(R) & le; V(S)). "> ID="1">A.2.2.8.7 > ID="2">TC11013 > ID="3">10.4.2 > ID="4">TTCN > ID="5">Ensures that the IUT when in state 1 discards an Incoming UI-frame with TEI value different from 127. "> ID="1">A.2.2.9.1 > ID="2">TC27417 > ID="3">10.7.5 10.7.6 > ID="4">TTCN > ID="5">Ensures T200 is within the allowed tolerance of its value of 1 second (± 5 %). "> ID="1">A.2.2.9.2 > ID="2">TC27411 > ID="3">10.7.5 10.7.6 > ID="4">TTCN > ID="5">Ensures the correct value of N200, the maximum number of (retransmissions of a frame (default value 3)). "">

Layer 3, NET 3, cross reference list

"" ID="1">A.1.1.1.1 > ID="2">TC10005 > ID="3">11.4.2.1 11.4.2.4 11.4.2.5.1 > ID="4">TTCN > ID="5">Ensures that on receipt of a valid SETUP message without the Sending complete information element the terminal responds with either a SETUP ACKNOWLEDGE, CALL PROCEEDING, ALERTING or CONNECT message and moves to the relevant state. "> ID="1">A.1.1.1.2 > ID="2">TC10006 > ID="3">11.4.2.1 11.4.2.5.1 > ID="4">TTCN > ID="5">Ensures that on receipt of a valid SETUP message with the Sending complete information element the terminal responds with either a CALL PROCEEDING, ALERTING or CONNECT message and moves to the relevant state. "> ID="1">A.1.1.2.1 > ID="2">TC10008 > ID="3">11.4.2.2 > ID="4">TTCN > ID="5">Ensures that on receipt of a valid SETUP message containing an incompatibly coded bearer capability value in the Bearer capability information element the TE either ignores the incoming Call (OPTION A) or responds by sending a RELEASE COMPLETE message (OPTION B) and remains in the Null state. "> ID="1">A.1.1.2.2 > ID="2">TC10009 > ID="3">11.4.2.2 > ID="4">TTCN > ID="5">This test is only applicable to TE's with an HLC capability It ensures that on receipt of a valid SET UP message containing a compatible BC but incompatible High Layer compatibility information element the TE (which performs high layer compatibility checks) either ignores the incoming call (OPTION A) or responds by sending a RELEASE COMPLETE message (OPTION B) and remains in the Null state. "> ID="1">A.1.2 > ID="2">TC10011 > ID="3">11.4.6.2 > ID="4">TTCN > ID="5">Ensures that on receipt of a repeated valid SETUP message with the same call reference as the initial SETUP message, the terminal ignores the second SETUP message and remains in the same state. "> ID="1">A.1.3.3 > ID="2">TC10015 > ID="3">11.4.6.5.1 > ID="4">TTCN > ID="5">Ensures that on receipt of a SETUP message without a mandatory information element (e.g. the Bearer capability information element), the terminal responds with a RELEASE COMPLETE message and remains in the Null state. "> ID="1">A.1.3.4 > ID="2">TC10027 > ID="3">11.4.6.6.1 > ID="4">TTCN > ID="5">Ensures that on receipt of a SETUP message with an unrecognized (not yet defined) information element of the type 'comprehension required' (i.e. bits 5-8 of the information element identifier coded ' 0 0 0 0 ') the terminal responds with a RELEASE COMPLETE message and remains in the Null state. "> ID="1">A.1.3.5 > ID="2">TC10028 > ID="3">11.4.6.6.1 > ID="4">TTCN > ID="5">Ensures that on receipt of a SETUP message with an unrecognized (not yet defined) information element of the type other than 'comprehension required' (i.e. bits 5-8 of the information element identifier coded other than ' 0 0 0 0 ') the terminal takes normal action on those information elements which are recognized and have valid content. Additionally the terminal may return a STATUS message. "> ID="1">A.1.3.6 > ID="2">TC10029 > ID="3">11.4.6.6.2 > ID="4">TTCN > ID="5">Ensures that on receipt of a SETUP message with a non-mandatory information element with invalid/unrecognized content the terminal takes normal action on those information elements which are recognized and have valid content. Additionally the terminal may return a STATUS message. "> ID="1">A.1.3.7 > ID="2">TC19003 > ID="3">11.4.8 > ID="4">TTCN > ID="5">Ensures that on receipt of a RESTART message the specified channel is returned to the idle condition, the call reference is returned to the Null State and a RESTART ACKNOWLEDGE is sent. (Test in ETS 300 104/A1) "> ID="1">A.2.1 > ID="2">TC10002 > ID="3">11.4.6.2 11.4.6.3 > ID="4">TTCN > ID="5">Ensures the terminal responds to a RELEASE message with a RELEASE COMPLETE message and that no change of state occurs. "> ID="1">A.2.2 > ID="2">TC10001 > ID="3">11.4.6.3 > ID="4">TTCN > ID="5">Ensures the terminal ignores a RELEASE COMPLETE message and that no change of state occurs. "> ID="1">A.2.3.1 > ID="2">TC10010 > ID="3">11.4.6.2 > ID="4">TTCN > ID="5">Ensures the terminal responds to an inopportune message with a RELEASE or a RELEASE COMPLETE message (see Preliminary Note 10). "> ID="1">A.2.4.2 > ID="2">TC10004 > ID="3">11.4.6.8 > ID="4">TTCN > ID="5">Ensures that on receipt of a STATUS message indicating any call state except the Null state, the terminal responds with either a RELEASE or a RELEASE COMPLETE message. "> ID="1">A.2.5 > ID="2">TC20001 > ID="3">11.4.4.4 > ID="4">TTCN > ID="5">Ensures that on sending a RESUME message the terminal enters the Resume Request state. "> ID="1">A.4.1 > ID="2">TC12501 > ID="3">11.4.3.4.2 > ID="4">TTCN > ID="5">Ensures the terminal responds to a DISCONNECT message with a RELEASE message and enters the Release Request state. "> ID="1">A.4.2 > ID="2">TC12505 > ID="3">11.4.6.3 > ID="4">TTCN > ID="5">Ensures that on receipt of a RELEASE message the terminal responds with RELEASE COMPLETE message and enters the Null state. "> ID="1">A.4.3 > ID="2">TC12504 > ID="3">11.4.6.3 > ID="4">TTCN > ID="5">Ensures that on receipt of a RELEASE COMPLETE message the terminal makes no response but returns to the Null state. "> ID="1">A.4.4.1 > ID="2">TC12508 > ID="3">11.4.6.3 > ID="4">TTCN > ID="5">Ensures the terminal responds to an inopportune message with a STATUS message and that no change of state occurs. "> ID="1">A.4.4.2 > ID="2">TC12521 > ID="3">11.4.6.3 > ID="4">TTCN > ID="5">Ensures the terminal responds to a syntactically invalid message type with a STATUS message and that no change of state occurs. "> ID="1">A.4.5.1 > ID="2">TC12502 > ID="3">11.4.2.4 > ID="4">TTCN > ID="5">Ensures that on receipt of an INFORMATION PDU without sufficient called number information the IUT does not respond and remains in the same state. "> ID="1">A.4.5.2 > ID="2">TC12503 > ID="3">11.4.2.4 11.4.2.5.1 > ID="4">TTCN > ID="5">Ensures that on receipt of an INFORMATION message containing sufficient called number information the terminal responds with either a CALL PROCEEDING, ALERTING or CONNECT message and moves to the relevant state. "> ID="1">A.4.6.1 > ID="2">TC12507 > ID="3">11.4.6.8 > ID="4">TTCN > ID="5">Ensures that on receipt of a STATUS message specifying the Null state, the terminal moves into the Null state. "> ID="1">A.5.1 > ID="2">TC10901 > ID="3">11.4.3.4.2 > ID="4">TTCN > ID="5">Ensures the terminal responds to a DISCONNECT message with a RELEASE message and enters the Release Request state. "> ID="1">A.5.2 > ID="2">TC10904 > ID="3">11.4.6.3 > ID="4">TTCN > ID="5">Ensures the terminal responds to a RELEASE message with a RELEASE COMPLETE message and enters the Null state. "> ID="1">A.5.3 > ID="2">TC10903 > ID="3">11.4.6.3 > ID="4">TTCN > ID="5">Ensures that on receipt of a RELEASE COMPLETE message the terminal makes no response but returns to the Null state. "> ID="1">A.5.4.1 > ID="2">TC10907 > ID="3">11.4.6.3 > ID="4">TTCN > ID="5">Ensures the terminal responds to an inopportune message with a STATUS message and that no change of state occurs. "> ID="1">A.5.4.2 > ID="2">TC10920 > ID="3">11.4.6.3 > ID="4">TTCN > ID="5">Ensures the terminal responds to a message having an invalid message type with a STATUS message and that no change of state occurs. "> ID="1">A.5.6.1 > ID="2">TC10906 > ID="3">11.4.6.8 > ID="4">TTCN > ID="5">Ensures that on receipt of a STATUS message specifying the Null state, the terminal moves into the Null state. "> ID="1">A.6.1 > ID="2">TC10701 > ID="3">11.4.3.4.2 > ID="4">TTCN > ID="5">Ensures the terminal responds to a DISCONNECT message with a RELEASE message and enters the Release Request state. "> ID="1">A.6.2 > ID="2">TC10704 > ID="3">11.4.6.3 > ID="4">TTCN > ID="5">Ensures the terminal responds to a RELEASE message with a RELEASE COMPLETE message and enters the Null state. "> ID="1">A.6.3 > ID="2">TC10703 > ID="3">11.4.2 11.4.6.3 > ID="4">TTCN > ID="5">Ensures that on receipt of a RELEASE COMPLETE message the terminal makes no response but returns to the Null state. "> ID="1">A.6.4.1 > ID="2">TC10707 > ID="3">11.4.6.3 > ID="4">TTCN > ID="5">Ensures the terminal responds to an inopportune message with a STATUS message and that no change of state occurs. "> ID="1">A.6.4.2 > ID="2">TC10720 > ID="3">11.4.6.3 > ID="4">TTCN > ID="5">Ensures the terminal responds to a message having an invalid message type with a STATUS message and that no change of state occurs. "> ID="1">A.6.6.1 > ID="2">TC10706 > ID="3">11.4.6.8 > ID="4">TTCN > ID="5">Ensures that on receipt of STATUS message specifying the Null state, the terminal moves into the Null state. "> ID="1">A.7.1 > ID="2">TC10802 > ID="3">11.4.3.4.2 > ID="4">TTCN > ID="5">Ensures the terminal responds to a DISCONNECT message with a RELEASE message and enters the Release Request state. "> ID="1">A.7.2 > ID="2">TC10805 > ID="3">11.4.2.8 11.4.6.3 > ID="4">TTCN > ID="5">Ensures the terminal responds to a RELEASE message with a RELEASE COMPLETE message and enters the Null state. "> ID="1">A.7.3 > ID="2">TC10804 > ID="3">11.4.6.3 > ID="4">TTCN > ID="5">Ensures that on receipt of a RELEASE COMPLETE message the terminal makes no response but returns to the Null state. "> ID="1">A.7.4.1 > ID="2">TC10808 > ID="3">11.4.6.3 > ID="4">TTCN > ID="5">Ensures the terminal responds to an inopportune message with a STATUS message and that no change of state occurs. "> ID="1">A.7.4.2 > ID="2">TC10821 > ID="3">11.4.6.3 > ID="4">TTCN > ID="5">Ensures the terminal responds to a message having an invalid message type with a STATUS message and that no change of state occurs. "> ID="1">A.7.6.1 > ID="2">TC10807 > ID="3">11.4.6.8 > ID="4">TTCN > ID="5">Ensures that on receipt of a STATUS message specifying the Null state, the terminal moves into the Null state. "> ID="1">A.7.7 > ID="2">TC10801 > ID="3">11.4.2.7 > ID="4">TTCN > ID="5">Ensures that the terminal will enter the Active state on receipt of a CONNECT ACKNOWLEDGE message. "> ID="1">A.8.2 > ID="2">TC11005 > ID="3">11.4.6.3 > ID="4">TTCN > ID="5">Ensures the terminal responds to a RELEASE message with a RELEASE COMPLETE message and enters the Null state. "> ID="1">A.8.3 > ID="2">TC11004 > ID="3">11.4.6.3 > ID="4">TTCN > ID="5">Ensures that on receipt of a RELEASE COMPLETE message the terminal makes no response but returns to the Null state. "> ID="1">A.8.4.1 > ID="2">TC11008 > ID="3">11.4.6.3 > ID="4">TTCN > ID="5">Ensures the terminal responds to an inopportune message with a STATUS message and that no change of state occurs. "> ID="1">A.8.4.2.1 > ID="2">TC11021 > ID="3">11.4.6.3 > ID="4">TTCN > ID="5">Ensures the terminal responds to a message having an invalid message type with a STATUS message and that no change of state occurs. "> ID="1">A.8.6.1 > ID="2">TC11007 > ID="3">11.4.6.8 > ID="4">TTCN > ID="5">Ensures that on receipt of a STATUS message specifying the Null state, the terminal moves into the Null state. "> ID="1">A.8.7 > ID="2">TC11003 > ID="3">11.4.7 > ID="4">TTCN > ID="5">Ensures that on receipt of a NOTIFY message the terminal makes no response and remains in the same state. "> ID="1">A.8.8 > ID="2">TC21003 > ID="3">11.4.3.3 > ID="4">TTCN > ID="5">Ensures the terminal transmits a DISCONNECT message and enters the Disconnect Request state on invocation of clearing. "> ID="1">A.8.9 > ID="2">TC21005 > ID="3">11.4.4.1 > ID="4">TTCN > ID="5">Ensures that on transmission of a SUSPEND message the terminal moves into the Suspend Request state. "> ID="1">A.9.1 > ID="2">TC20002 > ID="3">11.4.1.1 > ID="4">TTCN > ID="5">Ensures terminal transmits a valid SETUP message and enters the Call Initiated state (state 1). "> ID="1">A.10.1 > ID="2">TC10103 > ID="3">11.4.6.3 > ID="4">TTCN > ID="5">Ensures on receipt of a RELEASE message the terminal responds with a RELEASE COMPLETE message and enters the Null state. "> ID="1">A.10.2 > ID="2">TC10102 > ID="3">11.4.6.3 > ID="4">TTCN > ID="5">Ensures on receipt of a RELEASE COMPLETE message the terminal makes no response but returns to the Null state. "> ID="1">A.10.3.1 > ID="2">TC10107 > ID="3">11.4.6.3 > ID="4">TTCN > ID="5">Ensures the terminal responds to an inopportune message with a STATUS message and that no change of state occurs. "> ID="1">A.10.3.2 > ID="2">TC10120 > ID="3">11.4.6.3 > ID="4">TTCN > ID="5">Ensures the terminal responds to a message having an invalid message type with a STATUS message and that no change of state occurs. "> ID="1">A.10.4.1 > ID="2">TC10105 > ID="3">11.4.6.8 > ID="4">TTCN > ID="5">Ensures that on receipt of a STATUS message specifying the Null state, the terminal moves into the Null state. "> ID="1">A.10.5 > ID="2">TC10101 > ID="3">11.4.1.3.1 > ID="4">TTCN > ID="5">Ensures that on receipt of a CALL PROCEEDING message the terminal enters the Outgoing CALL PROCEEDING state. "> ID="1">A.10.6 > ID="2">TC10104 > ID="3">11.4.1.2 > ID="4">TTCN > ID="5">Ensures on receipt of a SETUP ACKNOWLEDGE message the terminal enters the Overlap Sending state. "> ID="1">A.11.1 > ID="2">TC10204 > ID="3">11.4.3.4.2 > ID="4">TTCN > ID="5">Ensures on receipt of a DISCONNECT message the terminal moves into the Disconnect Indication state. "> ID="1">A.11.2 > ID="2">TC10208 > ID="3">11.4.6.3 > ID="4">TTCN > ID="5">Ensures on receipt of a RELEASE message the terminal responds with a RELEASE COMPLETE message and enters the Null state. "> ID="1">A.11.3 > ID="2">TC10207 > ID="3">11.4.6.3 > ID="4">TTCN > ID="5">Ensures that on receipt of a RELEASE COMPLETE message the terminal makes no response but returns to the Null state. "> ID="1">A.11.4.1 > ID="2">TC10211 > ID="3">11.4.6.3 > ID="4">TTCN > ID="5">Ensures the terminal responds to an inopportune message with a STATUS message and that no change of state occurs. "> ID="1">A.11.4.2 > ID="2">TC10224 > ID="3">11.4.6.3 > ID="4">TTCN > ID="5">Ensures the terminal responds to a message having an invalid message type with a STATUS message and that no change of state occurs. "> ID="1">A.11.6.1 > ID="2">TC10210 > ID="3">11.4.6.8 > ID="4">TTCN > ID="5">Ensures that on receipt of a STATUS message specifying the Null state, the terminal moves into the Null state. "> ID="1">A.11.8 > ID="2">TC10203 > ID="3">11.4.1.3.2 > ID="4">TTCN > ID="5">Ensures on receipt of a CALL PROCEEDING message the terminal enters the Outgoing CALL PROCEEDING state (state 3). "> ID="1">A.11.9 > ID="2">TC10201 > ID="3">11.4.1.4 > ID="4">TTCN > ID="5">Ensures on receipt of an ALERTING message the terminal enters the Call Delivered state. "> ID="1">A.11.10 > ID="2">TC10202 > ID="3">11.4.1.5 > ID="4">TTCN > ID="5">Ensures on receipt of a CONNECT message the terminal enters the Active state (a CONNECT ACKNOWLEDGE response from the terminal is optional). "> ID="1">A.11.11 > ID="2">TC20204 > ID="3">11.4.1.2 > ID="4">TTCN > ID="5">Ensures the terminal transmits an INFORMATION message when prompted and remains in the same state. "> ID="1">A.11.12 > ID="2">TC20203 > ID="3">11.4.3.3 > ID="4">TTCN > ID="5">Ensures the terminal transmits a DISCONNECT message and enters the Disconnect request state on initiation of call clearing by the terminal. "> ID="1">A.12.1 > ID="2">TC10303 > ID="3">11.4.3.4.2 > ID="4">TTCN > ID="5">Ensures on receipt of a DISCONNECT message the terminal enters the Release Request state. "> ID="1">A.12.2 > ID="2">TC10307 > ID="3">11.4.6.3 > ID="4">TTCN > ID="5">Ensures on receipt of a RELEASE message the terminal responds with a RELEASE COMPLETE message and enters the Null state. "> ID="1">A.12.3 > ID="2">TC10306 > ID="3">11.4.6.3 > ID="4">TTCN > ID="5">Ensures on receipt of a RELEASE COMPLETE message the terminal makes no response but returns to the Null state. "> ID="1">A.12.4.1 > ID="2">TC10310 > ID="3">11.4.6.3 > ID="4">TTCN > ID="5">Ensures the terminal responds to an inopportune message with a STATUS message and that no change of state occurs. "> ID="1">A.12.4.2 > ID="2">TC10323 > ID="3">11.4.6.3 > ID="4">TTCN > ID="5">Ensures the terminal responds to a message having an invalid message type with a STATUS message and that no change of state occurs. "> ID="1">A.12.6.1 > ID="2">TC10309 > ID="3">11.4.6.8 > ID="4">TTCN > ID="5">Ensures that on receipt of a STATUS message specifying the Null state, the terminal moves into the Null state. "> ID="1">A.12.9 > ID="2">TC10302 > ID="3">11.4.1.5 > ID="4">TTCN > ID="5">Ensures on receipt of a CONNECT message the terminal enters the Active state (a CONNECT ACKNOWLEDGE response from the terminal is optional). "> ID="1">A.12.10 > ID="2">TC20301 > ID="3">11.4.3.3 > ID="4">TTCN > ID="5">Ensures that when the terminal transmits a DISCONNECT message it enters the Disconnect Request state. "> ID="1">A.13.1 > ID="2">TC10402 > ID="3">11.4.3.4.2 > ID="4">TTCN > ID="5">Ensures on receipt of a DISCONNECT message the terminal responds with a RELEASE message and enters Release Request state. "> ID="1">A.13.2 > ID="2">TC10406 > ID="3">11.4.6.3 > ID="4">TTCN > ID="5">Ensures on receipt of a RELEASE message the terminal responds with a RELEASE COMPLETE message and enters the Null state. "> ID="1">A.13.3 > ID="2">TC10405 > ID="3">11.4.6.3 > ID="4">TTCN > ID="5">Ensures that on receipt of a RELEASE COMPLETE message the terminal makes no response but returns to the Null state. "> ID="1">A.13.4.1 > ID="2">TC10409 > ID="3">11.4.6.3 > ID="4">TTCN > ID="5">Ensures the terminal responds to an inopportune message with a STATUS message and that no change of state occurs. "> ID="1">A.13.4.2 > ID="2">TC10422 > ID="3">11.4.6.3 > ID="4">TTCN > ID="5">Ensures the terminal responds to a message having an invalid message type with STATUS message and that no change of state occurs. "> ID="1">A.13.6.1 > ID="2">TC10408 > ID="3">11.4.6.8 > ID="4">TTCN > ID="5">Ensures that on receipt of a STATUS message specifying the Null state, the terminal moves into the Null state. "> ID="1">A.13.8 > ID="2">TC10401 > ID="3">11.4.1.5 > ID="4">TTCN > ID="5">Ensures on receipt of a CONNECT message the terminal enters the Active state (a CONNECT ACKNOWLEDGE response from the terminal is optional). "> ID="1">A.13.9 > ID="2">TC20401 > ID="3">11.4.3.3 > ID="4">TTCN > ID="5">Ensures that when the terminal transmits a DISCONNECT message it enters the Disconnect Request state. "> ID="1">A.14.1 > ID="2">TC11101 > ID="3">11.4.3.4.2 11.4.3.5 > ID="4">TTCN > ID="5">Ensures the terminal responds to a DISCONNECT message with a RELEASE message and enters the Release Request state. "> ID="1">A.14.2 > ID="2">TC11105 > ID="3">11.4.3.3 > ID="4">TTCN > ID="5">Ensures the terminal responds to a RELEASE message with a RELEASE COMPLETE message and enters the Null state. "> ID="1">A.14.3 > ID="2">TC11104 > ID="3">11.4.6.3 > ID="4">TTCN > ID="5">Ensures that on receipt of a RELEASE COMPLETE message the terminal makes no response but returns to the Null state. "> ID="1">A.14.4.1 > ID="2">TC11107 > ID="3">11.4.6.3 11.4.6.7 > ID="4">TTCN > ID="5">Ensures the terminal responds to an inopportune message with a STATUS message and that no change of state occurs. "> ID="1">A.14.4.2 > ID="2">TC11120 > ID="3">11.4.6.3 > ID="4">TTCN > ID="5">Ensures the terminal responds to a message having an invalid message type with a STATUS message and that no change of state occurs. "> ID="1">A.14.6.1 > ID="2">TC11106 > ID="3">11.4.6.8 > ID="4">TTCN > ID="5">Ensures that on receipt of a STATUS message specifying the Null state, the terminal moves into the Null state. "> ID="1">A.14.7 > ID="2">TC11103 > ID="3">11.4.7 > ID="4">TTCN > ID="5">Ensures that on receipt of a NOTIFY message the terminal makes no response or returns a STATUS message and remains in the same state. "> ID="1">A.16.1 > ID="2">TC11904 > ID="3">11.4.3.5 11.4.6.3 > ID="4">TTCN > ID="5">Ensures that on receipt of a RELEASE message the terminal enters the Null state immediately. This is a test of RELEASE collision handling. "> ID="1">A.16.2 > ID="2">TC11903 > ID="3">11.4.3.4.3 11.4.6.3 > ID="4">TTCN > ID="5">Ensures the terminal on receipt of a RELEASE COMPLETE message clears down to the Null state. "> ID="1">A.16.3.1 > ID="2">TC11908 > ID="3">11.4.6.3 > ID="4">TTCN > ID="5">Ensures the terminal responds to an inopportune message with a STATUS message and that no change of state occurs. "> ID="1">A.16.3.2 > ID="2">TC11909 > ID="3">11.4.6.3 > ID="4">TTCN > ID="5">Ensures the terminal responds to a message having an invalid message type with a STATUS message and that no change of state occurs. "> ID="1">A.16.5.1 > ID="2">TC11906 > ID="3">11.4.6.8 > ID="4">TTCN > ID="5">Ensures that on receipt of a STATUS message the terminal releases the resources and moves into the Null state. "> ID="1">A.16.5.2 > ID="2">TC11907 > ID="3">11.4.6.8 > ID="4">TTCN > ID="5">In this case ensures that on receipt of a STATUS message the terminal makes no response and remains in the same state. "> ID="1">A.17.1 > ID="2">TC11501 > ID="3">11.4.3.4.2 > ID="4">TTCN > ID="5">Ensures the terminal responds to a DISCONNECT message with a RELEASE message and enters the Release Request state. "> ID="1">A.17.2 > ID="2">TC11506 > ID="3">11.4.6.3 > ID="4">TTCN > ID="5">Ensures the terminal responds to a RELEASE message with a RELEASE COMPLETE message and clears down to the Null state. "> ID="1">A.17.3 > ID="2">TC11505 > ID="3">11.4.6.3 > ID="4">TTCN > ID="5">Ensures that on receipt of a RELEASE COMPLETE message the terminal makes no response but returns to the Null state. "> ID="1">A.17.4.1 > ID="2">TC11510 > ID="3">11.4.6.3 > ID="4">TTCN > ID="5">Ensures the terminal responds to an inopportune message with a STATUS message and that no change of state occurs. "> ID="1">A.17.4.2 > ID="2">TC11512 > ID="3">11.4.6.3 > ID="4">TTCN > ID="5">Ensures the terminal responds to a message having an invalid message type with a STATUS message and that no change of state occurs. "> ID="1">A.17.6.1 > ID="2">TC11509 > ID="3">11.4.6.8 > ID="4">TTCN > ID="5">Ensures that on receipt of a STATUS message specifying the Null state, the terminal moves into the Null state. "> ID="1">A.17.7 > ID="2">TC11503 > ID="3">11.4.7 > ID="4">TTCN > ID="5">Ensures that on receipt of a NOTIFY message the terminal makes no response or returns a STATUS message and remains in the same state. "> ID="1">A.17.8 > ID="2">TC11508 > ID="3">11.4.4.3 > ID="4">TTCN > ID="5">Ensures on receipt of a SUSPEND REJECT message the terminal returns to the Active state. "> ID="1">A.17.9 > ID="2">TC11504 > ID="3">11.4.4.2 > ID="4">TTCN > ID="5">Ensures on receipt of a SUSPEND ACKNOWLEDGE message the terminal moves into the Null state. "> ID="1">A.18.1 > ID="2">TC11701 > ID="3">11.4.3.4.2 > ID="4">TTCN > ID="5">Ensures the terminal responds to a DISCONNECT message with a RELEASE message and enters the Release Request state. "> ID="1">A.18.2 > ID="2">TC11705 > ID="3">11.4.6.3 > ID="4">TTCN > ID="5">Ensures the terminal responds to a RELEASE message with a RELEASE COMPLETE message and enters the Null state. "> ID="1">A.18.3 > ID="2">TC11704 > ID="3">11.4.6.3 > ID="4">TTCN > ID="5">Ensures that on receipt of a RELEASE COMPLETE message the terminal makes no response but returns to the Null state. "> ID="1">A.18.4.1 > ID="2">TC11709 > ID="3">11.4.6.3 > ID="4">TTCN > ID="5">Ensures the terminal responds to an inopportune message with a STATUS message and that no change of state occurs. "> ID="1">A.18.4.2 > ID="2">TC11711 > ID="3">11.4.6.3 > ID="4">TTCN > ID="5">Ensures the terminal responds to a message having an invalid message type with a STATUS message and that no change of state occurs. "> ID="1">A.18.6.1 > ID="2">TC11708 > ID="3">11.4.6.8 > ID="4">TTCN > ID="5">Ensures that on receipt of a STATUS message specifying the Null state, the terminal moves into the Null state. "> ID="1">A.18.7 > ID="2">TC11706 > ID="3">11.4.4.5 > ID="4">TTCN > ID="5">Ensures that on receipt of a RESUME REJECT message the terminal returns to the Null state. "> ID="1">A.18.8 > ID="2">TC11703 > ID="3">11.4.4.4 > ID="4">TTCN > ID="5">Ensures that on receipt of a RESUME ACKNOWLEDGE message the terminal returns to the Active state. "">

(1) Draft prTBR 3, April 1994.(2) Draft prTBR 3, April 1994.(3) Draft prTBR 3, April 1994.(4) Draft prTBR 3, April 1994.(5) Draft prTBR 3, April 1994.(6) Draft prTBR 3, April 1994.(7) Draft prTBR 3, April 1994.(8) Draft prTBR 3, April 1994.(9) Draft prTBR 3, April 1994.(10) Draft prTBR 3, April 1994.(11) Draft prTBR 3, April 1994.(12) Draft prTBR 3, April 1994.(13) Draft prTBR 3, April 1994.(14) Draft prTBR 3, April 1994.(15) Draft prTBR 3, April 1994.

ANNEX III

Supplementary information Test suites to be used to demonstration compliance with the relevant essential requirements could, in a number of cases, be based upon the tests using the TTCN notation. These tests are found under the following references: I-ETS 300 312, I-ETS 300 313 and I-ETS 300 322.

The full text of these I-ETSs can be obtained from the following address:

European Telecommunications Standards Institute,

F-06921 Sophia Antipolis Cedex.