This document is an excerpt from the EUR-Lex website
Document 52005XC0608(02)
Commission communication in the framework of the implementation of the Council Directive 89/106/EEC of 21 December 1988 on the approximation of laws, regulations and administrative provisions of the Member States relating to construction products (Text with EEA relevance)
Commission communication in the framework of the implementation of the Council Directive 89/106/EEC of 21 December 1988 on the approximation of laws, regulations and administrative provisions of the Member States relating to construction products (Text with EEA relevance)
Commission communication in the framework of the implementation of the Council Directive 89/106/EEC of 21 December 1988 on the approximation of laws, regulations and administrative provisions of the Member States relating to construction products (Text with EEA relevance)
IO C 139, 8.6.2005, p. 3–20
(ES, CS, DA, DE, ET, EL, EN, FR, IT, LV, LT, HU, NL, PL, PT, SK, SL, FI, SV)
|
8.6.2005 |
EN |
Official Journal of the European Union |
C 139/3 |
Commission communication in the framework of the implementation of the Council Directive 89/106/EEC of 21 December 1988 on the approximation of laws, regulations and administrative provisions of the Member States relating to construction products
(2005/C 139/03)
(Text with EEA relevance)
(Publication of titles and references of harmonised standards under the directive)
|
ESO (1) |
Reference and title of the harmonised standard (3) |
Reference of superseded standard |
Date of applicability of the standard as a harmonised European standard |
Date of the end of the co-existence period (2) |
|
CEN |
EN 40-5:2002 Lighting columns — Part 5: Requirements for steel lighting columns |
— |
1.2.2003 |
1.2.2005 |
|
CEN |
EN 40-6:2002 Lighting columns — Part 6: Requirements for aluminium lighting columns |
— |
1.2.2003 |
1.2.2005 |
|
CEN |
EN 40-7:2002 Lighting columns — Part 7: Requirements for fibre reinforced polymer composite lighting columns |
— |
1.2.2003 |
1.2.2005 |
|
CEN |
EN 54-3:2001 Fire detection and fire alarm systems — Part 3: Fire alarm devices — Sounders |
— |
— |
|
|
EN 54-3:2001/A1:2002 |
|
1.4.2003 |
30.6.2005 |
|
|
CEN |
EN 54-4:1997 Fire detection and fire alarm systems — Part 4: Power supply equipment |
— |
— |
|
|
EN 54-4:1997/AC:1999 |
|
|
|
|
|
EN 54-4:1997/A1:2002 |
|
1.10.2003 |
31.12.2005 |
|
|
CEN |
EN 54-5:2000 Fire detection and fire alarm systems — Part 5: Heat detectors — Point detectors |
— |
— |
|
|
EN 54-5:2000/A1:2002 |
|
1.4.2003 |
30.6.2005 |
|
|
CEN |
EN 54-7:2000 Fire detection and fire alarm systems — Part 7: Smoke detectors — Point detectors using scattered light, transmitted light or ionization |
— |
— |
|
|
EN 54-7:2000/A1:2002 |
|
1.4.2003 |
30.6.2005 |
|
|
CEN |
EN 54-12:2002 Fire detection and fire alarm systems — Part 12: Smoke detectors — Line detectors using an optical light beam |
— |
1.10.2003 |
31.12.2005 |
|
CEN |
EN 179:1997 Building hardware — Emergency exit devices operated by a lever handle or push pad — Requirements and test methods |
— |
— |
|
|
EN 179:1997/A1:2001 |
|
1.4.2002 |
1.4.2003 |
|
|
EN 179:1997/A1:2001/AC:2002 |
|
|
|
|
|
CEN |
EN 197-1:2000 Cement — Part 1: Composition, specifications and conformity criteria for common cements |
— |
1.4.2001 |
1.4.2002 |
|
EN 197-1:2000/A1:2004 |
|
1.2.2005 |
1.2.2006 |
|
|
CEN |
EN 197-4:2004 Cement — Part 4: Composition, specifications and conformity criteria for low early strength blastfurnace cements |
— |
1.2.2005 |
1.2.2006 |
|
CEN |
EN 413-1:2004 Masonry cement — Part 1: Composition, specifications and conformity criteria |
— |
1.12.2004 |
1.12.2005 |
|
CEN |
EN 438-7:2005 High-pressure decorative laminates (HPL) — Sheets based on thermosetting resins (Usually called Laminates) — Part 7: Compact laminate and HPL composite panels for internal and external wall and ceiling finishes |
— |
1.11.2005 |
1.11.2006 |
|
CEN |
EN 442-1:1995 Radiators and convectors — Part 1: Technical specifications and requirements |
— |
— |
|
|
EN 442-1:1995/A1:2003 |
|
1.12.2004 |
1.12.2005 |
|
|
CEN |
EN 459-1:2001 Building lime — Part 1: Definitions, specifications and conformity criteria |
— |
1.8.2002 |
1.8.2003 |
|
CEN |
EN 490:2004 Concrete roofing tiles and fittings for roof covering and wall cladding — Product specifications |
— |
1.9.2005 |
1.9.2006 |
|
CEN |
EN 520:2004 Gypsum plasterboards — Definitions, requirements and test methods |
— |
1.9.2005 |
1.9.2006 |
|
CEN |
EN 523:2003 Steel strip sheaths for prestressing tendons — Terminology, requirements, quality control |
— |
1.6.2004 |
1.6.2005 |
|
CEN |
EN 572-9:2004 Glass in building — Basic soda lime silicate glass products — Part 9: Evaluation of conformity/Product standard |
— |
1.9.2005 |
1.9.2006 |
|
CEN |
EN 588-2:2001 Fibre cement pipes for drains and sewers — Part 2: Manholes and inspection chambers |
— |
1.10.2002 |
1.10.2003 |
|
CEN |
EN 671-1:2001 Fixed firefighting systems — Hose systems — Part 1: Hose reels with semi-rigid hose |
— |
1.2.2002 |
1.4.2004 |
|
CEN |
EN 671-2:2001 Fixed firefighting systems — Hose systems — Part 2: Hose systems with lay-flat hose |
— |
1.2.2002 |
1.4.2004 |
|
CEN |
EN 681-1:1996 Elastomeric seals — Materials requirements for pipe joint seals used in water and drainage applications — Part 1: Vulcanized rubber |
— |
— |
|
|
EN 681-1:1996/A1:1998 |
|
— |
|
|
|
EN 681-1:1996/A2:2002 |
|
1.1.2003 |
1.1.2004 |
|
|
CEN |
EN 681-2:2000 Elastomeric Seals — Materials requirements for pipe joint seals used in water and drainage applications — Part 2: Thermoplastic elastomers |
— |
— |
|
|
EN 681-2:2000/A1:2002 |
|
1.1.2003 |
1.1.2004 |
|
|
CEN |
EN 681-3:2000 Elastomeric seals — Materials requirements for pipe joint seals used in water and drainage applications — Part 3: Cellular materials of vulcanized rubber |
— |
— |
|
|
EN 681-3:2000/A1:2002 |
|
1.1.2003 |
1.1.2004 |
|
|
CEN |
EN 681-4:2000 Elastomeric seals — Materials requirements for pipe joint seals used in water and drainage applications — Part 4: Cast polyurethane sealing elements |
— |
— |
|
|
EN 681-4:2000/A1:2002 |
|
1.1.2003 |
1.1.2004 |
|
|
CEN |
EN 682:2002 Elastomeric Seals — Materials requirements for seals used in pipes and fittings carrying gas and hydrocarbon fluids |
— |
1.10.2002 |
1.12.2003 |
|
CEN |
EN 771-1:2003 Specification for masonry units — Part 1: Clay masonry units |
— |
1.12.2004 |
1.4.2006 |
|
EN 771-1:2003/A1:2005 |
|
1.4.2005 |
1.4.2006 |
|
|
CEN |
EN 771-2:2003 Specification for masonry units — Part 2: Calcium silicate masonry units |
EN 771-2:2000 |
1.12.2004 |
1.4.2006 |
|
EN 771-2:2003/A1:2005 |
|
1.4.2005 |
1.4.2006 |
|
|
CEN |
EN 771-3:2003 Specification for masonry units — Part 3: Aggregate concrete masonry units (Dense and light-weight aggregates) |
— |
1.12.2004 |
1.4.2006 |
|
EN 771-3:2003/A1:2005 |
|
1.4.2005 |
1.4.2006 |
|
|
CEN |
EN 771-4:2003 Specification for masonry units — Part 4: Autoclaved aerated concrete masonry units |
— |
1.12.2004 |
1.4.2006 |
|
EN 771-4:2003/A1:2005 |
|
1.4.2005 |
1.4.2006 |
|
|
CEN |
EN 771-5:2003 Specification for masonry units — Part 5: Manufactured stone masonry units |
— |
1.3.2005 |
1.4.2006 |
|
EN 771-5:2003/A1:2005 |
|
1.4.2005 |
1.4.2006 |
|
|
CEN |
EN 845-1:2003 Specification for ancillary components for masonry — Part 1: Ties, tension straps, hangers and brackets |
— |
1.2.2004 |
1.2.2005 |
|
CEN |
EN 845-2:2003 Specification for ancillary components for masonry — Part 2: Lintels |
— |
1.2.2004 |
1.4.2006 |
|
CEN |
EN 845-3:2003 Specification for ancillary components for masonry — Part 3: Bed joint reinforcement of steel meshwork |
— |
1.2.2004 |
1.2.2005 |
|
CEN |
EN 858-1:2002 Separator systems for light liquids (e.g. oil and petrol) — Part 1: Principles of product design, performance and testing, marking and quality control |
— |
1.9.2005 |
1.9.2006 |
|
EN 858-1:2002/A1:2004 |
|
1.9.2005 |
1.9.2006 |
|
|
CEN |
EN 934-2:2001 Admixtures for concrete, mortar and grout — Part 2: Concrete admixtures — Definitions, requirements, conformity, marking and labelling |
— |
1.5.2002 |
1.5.2003 |
|
EN 934-2:2001/A1:2004 |
|
1.7.2005 |
1.7.2005 |
|
|
CEN |
EN 934-3:2003 Admixtures for concrete, mortar and grout — Part 3: Admixtures for masonry mortar — Definitions, requirements, conformity, marking and labelling |
— |
1.6.2005 |
1.6.2006 |
|
EN 934-3:2003/AC:2005 |
|
|
|
|
|
CEN |
EN 934-4:2001 Admixtures for concrete, mortar and grout — Part 4: Admixtures for grout for prestressing tendons — Definitions, requirements, conformity, marking and labelling |
— |
1.5.2002 |
1.5.2003 |
|
CEN |
EN 997:2003 WC pans and WC suites with integral trap |
— |
1.12.2004 |
1.12.2005 |
|
CEN |
EN 998-1:2003 Specification for mortar for masonry — Part 1: Rendering and plastering mortar |
— |
1.2.2004 |
1.2.2005 |
|
CEN |
EN 998-2:2003 Specification for mortar for masonry — Part 2: Masonry mortar |
— |
1.2.2004 |
1.2.2005 |
|
CEN |
EN 1096-4:2004 Glass in building — Coated glass — Part 4: Evaluation of conformity/Product standard |
— |
1.9.2005 |
1.9.2006 |
|
CEN |
EN 1123-1:1999 Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems — Part 1: Requirements, testing, quality control |
— |
1.6.2005 |
1.6.2006 |
|
EN 1123-1:1999/A1:2004 |
|
1.6.2005 |
1.6.2006 |
|
|
CEN |
EN 1124-1:1999 Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems — Part 1: Requirements, testing, quality control |
— |
1.6.2005 |
1.6.2006 |
|
EN 1124-1:1999/A1:2004 |
|
1.6.2005 |
1.6.2006 |
|
|
CEN |
EN 1125:1997 Building hardware — Panic exit devices operated by a horizontal bar — Requirements and test methods |
— |
— |
|
|
EN 1125:1997/A1:2001 |
|
1.4.2002 |
1.4.2003 |
|
|
EN 1125:1997/A1:2001/AC:2002 |
|
|
|
|
|
CEN |
EN 1154:1996 Building hardware — Controlled door closing devices — Requirements and test methods |
— |
— |
|
|
EN 1154:1996/A1:2002 |
|
1.102003 |
1.10.2004 |
|
|
CEN |
EN 1155:1997 Building hardware — Electrically powered hold-open devices for swing doors — Requirements and test methods |
— |
— |
|
|
EN 1155:1997/A1:2002 |
|
1.10.2003 |
1.10.2004 |
|
|
CEN |
EN 1158:1997 Building hardware — Door coordinator devices — Requirements and test methods |
— |
— |
|
|
EN 1158:1997/A1:2002 |
|
1.10.2003 |
1.10.2004 |
|
|
CEN |
EN 1337-4:2004 Structural bearings — Part 4: Roller bearings |
— |
1.2.2005 |
1.2.2006 |
|
CEN |
EN 1337-6:2004 Structural bearings — Part 6: Rocker bearings |
— |
1.2.2005 |
1.2.2006 |
|
CEN |
EN 1337-7:2004 Structural bearings — Part 7: Spherical and cylindrical PTFE bearings |
EN 1337-7:2000 |
1.12.2004 |
1.6.2005 |
|
CEN |
EN 1338:2003 Concrete paving blocks — Requirements and test methods |
— |
1.3.2004 |
1.3.2005 |
|
CEN |
EN 1339:2003 Concrete paving flags — Requirements and test methods |
— |
1.3.2004 |
1.3.2005 |
|
CEN |
EN 1340:2003 Concrete kerb units — Requirements and test methods |
— |
1.2.2004 |
1.2.2005 |
|
CEN |
EN 1341:2001 Slabs of natural stone for external paving — Requirements and test methods |
— |
1.10.2002 |
1.10.2003 |
|
CEN |
EN 1342:2001 Setts of natural stone for external paving — Requirements and test methods |
— |
1.10.2002 |
1.10.2003 |
|
CEN |
EN 1343:2001 Kerbs of natural stone for external paving — Requirements and test methods |
— |
1.10.2002 |
1.10.2003 |
|
CEN |
EN 1344:2002 Clay pavers — Requirements and test methods |
— |
1.1.2003 |
1.1.2004 |
|
CEN |
EN 1423:1997 Road marking materials — Drop on materials — Glass beads, antiskid aggregates and mixtures of the two |
— |
— |
|
|
EN 1423:1997/A1:2003 |
|
1.5.2004 |
1.5.2005 |
|
|
CEN |
EN 1433:2002 Drainage channels for vehicular and pedestrian areas — Classification, design and testing requirements, marking and evaluation of conformity |
— |
1.8.2003 |
1.8.2004 |
|
CEN |
EN 1457:1999 Chimneys — Clay/Ceramic Flue Liners — Requirements and test methods |
— |
— |
|
|
EN 1457:1999/AC:1999 |
|
|
|
|
|
EN 1457:1999/A1:2002 |
|
1.8.2003 |
1.8.2004 |
|
|
CEN |
EN 1463-1:1997 Road marking materials — Retroflecting road studs — Part 1: Initial performance requirements |
— |
— |
|
|
EN 1463-1:1997/A1:2003 |
|
1.12.2004 |
1.12.2005 |
|
|
CEN |
EN 1469:2004 Natural stone products — Slabs for cladding — Requirements |
— |
1.7.2005 |
1.7.2006 |
|
CEN |
EN 1504-2:2004 Products and systems for the protection and repair of concrete structures — Definitions, requirements, quality control and evaluation of conformity — Part 2: Surface protection systems for concrete |
— |
1.9.2005 |
1.9.2006 |
|
CEN |
EN 1504-4:2004 Products and systems for the protection and repair of concrete structures — Definitions, requirements, quality control and evaluation of conformity — Part 4: Structural bonding |
— |
1.9.2005 |
1.9.2006 |
|
CEN |
EN 1504-5:2004 Products and systems for the protection and repair of concrete structures — Definitions, requirements, quality control and evaluation of conformity — Part 5: Concrete injection |
— |
1.10.2005 |
1.10.2006 |
|
CEN |
EN 1520:2002 Prefabricated reinforced components of lightweight aggregate concrete with open structure |
— |
1.9.2003 |
1.9.2004 |
|
CEN |
EN 1748-1-2:2004 Glass in building — Special basic products — Borosilicate glasses — Part 1-2: Evaluation of conformity/Product standard |
— |
1.9.2005 |
1.9.2006 |
|
CEN |
EN 1748-2-2:2004 Glass in building — Special basic products — Glass ceramics — Part 2-2: Evaluation of conformity/Product standard |
— |
1.9.2005 |
1.9.2006 |
|
CEN |
EN 1825-1:2004 Grease separators — Part 1: Principles of design, performance and testing, marking and quality control |
— |
1.9.2005 |
1.9.2006 |
|
CEN |
EN 1856-1:2003 Chimneys — Requirements for metal chimneys — Part 1: System chimney products |
— |
1.4.2004 |
1.4.2005 |
|
CEN |
EN 1856-2:2004 Chimneys — Requirements for metal chimneys — Part 2: Metal liners and connecting flue pipes |
— |
1.5.2005 |
1.5.2006 |
|
CEN |
EN 1857:2003 Chimneys — Components — Concrete flue liners |
— |
1.5.2004 |
1.5.2005 |
|
CEN |
EN 1858:2003 Chimneys — Components — Concrete flue blocks |
— |
1.5.2004 |
1.5.2005 |
|
CEN |
EN 1863-2:2004 Glass in building — Heat strengthened soda lime silicate glass — Part 2: Evaluation of conformity/Product standard |
— |
1.9.2005 |
1.9.2006 |
|
CEN |
EN 1916:2002 Concrete pipes and fittings, unreinforced, steel fibre and reinforced |
— |
1.8.2003 |
23.11.2004 |
|
CEN |
EN 1917:2002 Concrete manholes and inspection chambers, unreinforced, steel fibre and reinforced |
— |
1.8.2003 |
23.11.2004 |
|
CEN |
EN 1935:2002 Building hardware — Single-axis hinges — Requirements and test methods |
— |
1.12.2002 |
1.12.2003 |
|
CEN |
EN 10025-1:2004 Hot rolled products of structural steels — Part 1: General technical delivery conditions |
— |
1.9.2005 |
1.9.2006 |
|
CEN |
EN 12004:2001 Adhesives for tiles — Definitions and specifications |
— |
— |
|
|
EN 12004:2001/A1:2002 |
|
1.4.2003 |
1.4.2004 |
|
|
EN 12004:2001/A1:2002/AC:2002 |
|
|
|
|
|
CEN |
EN 12050-1:2001 Wastewater lifting plants for buildings and sites — Principles of construction and testing — Part 1: Lifting plants for wastewater containing faecal matter |
— |
1.11.2001 |
1.11.2002 |
|
CEN |
EN 12050-2:2000 Wastewater lifting plants for buildings and sites — Principles of construction and testing — Part 2: Lifting plants for faecal-free wastewater |
— |
1.10.2001 |
1.10.2002 |
|
CEN |
EN 12050-3:2000 Wastewater lifting plants for buildings and sites — Principles of construction and testing — Part 3: Lifting plants for wastewater containing faecal matter for limited applications |
— |
1.10.2001 |
1.10.2002 |
|
CEN |
EN 12050-4:2000 Wastewater lifting plants for buildings and sites — Principles of construction and testing — Part 4: Non-return valves for faecal-free wastewater and wastewater containing faecal matter |
— |
1.10.2001 |
1.10.2002 |
|
CEN |
EN 12057:2004 Natural stone products — Modular tiles — Requirements |
— |
1.9.2005 |
1.9.2006 |
|
CEN |
EN 12058:2004 Natural stone products — Slabs for floors and stairs — Requirements |
— |
1.9.2005 |
1.9.2006 |
|
CEN |
EN 12094-1:2003 Fixed firefighting systems — Components for gas extinguishing systems — Part 1: Requirements and test methods for electrical automatic control and delay devices |
— |
1.2.2004 |
1.5.2006 |
|
CEN |
EN 12094-2:2003 Fixed firefighting systems — Components for gas extinguishing systems — Part 2: Requirements and test methods for non-electrical automatic control and delay devices |
— |
1.2.2004 |
1.5.2006 |
|
CEN |
EN 12094-3:2003 Fixed firefighting systems — Components for gas extinguishing systems — Part 3: Requirements and test methods for manual triggering and stop devices |
— |
1.1.2004 |
1.9.2005 |
|
CEN |
EN 12094-4:2004 Fixed firefighting systems — Components for gas extinguishing systems — Part 4: Requirements and test methods for container valve assemblies and their actuators |
— |
1.5.2005 |
1.5.2006 |
|
CEN |
EN 12094-5:2000 Fixed firefighting systems — Components for gas extinguishing systems — Part 5: Requirements and test methods for high and low pressure selector valves and their actuators for CO2 systems |
— |
1.10.2001 |
1.4.2004 |
|
CEN |
EN 12094-6:2000 Fixed firefighting systems — Components for gas extinguishing systems — Part 6: Requirements and test methods for non-electrical disable devices for CO2 systems |
— |
1.10.2001 |
1.4.2004 |
|
CEN |
EN 12094-7:2000 Fixed firefighting systems — Components for gas extinguishing systems — Part 7: Requirements and test methods for nozzles for CO2 systems |
— |
1.10.2001 |
1.4.2004 |
|
EN 12094-7:2000/A1:2005 |
|
1.11.2005 |
1.11.2006 |
|
|
CEN |
EN 12094-9:2003 Fixed firefighting systems — Components for gas extinguishing systems — Part 9: Requirements and test methods for special fire detectors |
— |
1.1.2004 |
1.9.2005 |
|
CEN |
EN 12094-10:2003 Fixed firefighting systems — Components for gas extinguishing systems — Part 10: Requirements and test methods for pressure gauges and pressure switches |
— |
1.2.2004 |
1.5.2006 |
|
CEN |
EN 12094-11:2003 Fixed firefighting systems — Components for gas extinguishing systems — Part 11: Requirements and test methods for mechanical weighing devices |
— |
1.1.2004 |
1.9.2005 |
|
CEN |
EN 12094-12:2003 Fixed firefighting systems — Components for gas extinguishing systems — Part 12: Requirements and test methods for pneumatic alarm devices |
— |
1.1.2004 |
1.9.2005 |
|
CEN |
EN 12094-13:2001 Fixed firefighting systems — Components for gas extinguishing systems — Part 13: Requirements and test methods for check valves and non-return valves |
— |
1.1.2002 |
1.4.2004 |
|
CEN |
EN 12101-2:2003 Smoke and heat control systems — Part 2: Specification for natural smoke and heat exhaust ventilators |
— |
1.4.2004 |
1.9.2006 |
|
CEN |
EN 12101-3:2002 Smoke and heat control systems — Part 3: Specification for powered smoke and heat exhaust ventilators |
— |
1.4.2004 |
1.4.2005 |
|
CEN |
EN 12150-2:2004 Glass in building — Thermally toughened soda lime silicate safety glass — Part 2: Evaluation of conformity/Product standard |
— |
1.9.2005 |
1.9.2006 |
|
CEN |
EN 12209:2003 Building hardware — Locks and latches — Mechanically operated locks, latches and locking plates — Requirements and test methods |
— |
1.12.2004 |
1.12.2005 |
|
CEN |
EN 12259-1:1999 + A1:2001 Fixed firefighting systems — Components for sprinkler and water spray systems — Part 1: Sprinklers |
— |
1.4.2002 |
1.9.2005 |
|
EN 12259-1:1999 + A1:2001/A2:2004 |
|
1.3.2005 |
1.3.2006 |
|
|
CEN |
EN 12259-2:1999 Fixed firefighting systems — Components for sprinkler and water spray systems — Part 2: Wet alarm valve assemblies |
— |
— |
|
|
EN 12259-2:1999/A1:2001 |
|
1.1.2002 |
1.9.2005 |
|
|
EN 12259-2:1999/AC:2002 |
|
|
|
|
|
CEN |
EN 12259-3:2000 Fixed firefighting systems — Components for automatic sprinkler and water spray systems — Part 3: Dry alarm valve assemblies |
— |
— |
|
|
EN 12259-3:2000/A1:2001 |
|
1.1.2002 |
1.9.2005 |
|
|
CEN |
EN 12259-4:2000 Fixed firefighting systems — Components for sprinkler and water spray systems — Part 4: Water motor alarms |
— |
— |
|
|
EN 12259-4:2000/A1:2001 |
|
1.1.2002 |
1.4.2004 |
|
|
CEN |
EN 12259-5:2002 Fixed firefighting systems — Components for sprinkler and water spray systems — Part 5: Water flow detectors |
— |
1.7.2003 |
1.9.2005 |
|
CEN |
EN 12326-1:2004 Slate and stone products for discontinuous roofing and cladding — Part 1: Product specification |
— |
1.5.2005 |
1.5.2006 |
|
CEN |
EN 12337-2:2004 Glass in building — Chemically strengthened soda lime silicate glass — Part 2: Evaluation of conformity/Product standard |
— |
1.9.2005 |
1.9.2006 |
|
CEN |
EN 12380:2002 Air admittance valves for drainage systems — Requirements, tests methods and evaluation of conformity |
— |
1.10.2003 |
1.10.2004 |
|
CEN |
EN 12416-1:2001 Fixed firefighting systems — Powder systems — Part 1: Requirements and test methods for components |
— |
1.1.2002 |
1.4.2004 |
|
EN 12416-1:2001/A1:2004 |
|
1.6.2005 |
1.6.2005 |
|
|
CEN |
EN 12416-2:2001 Fixed firefighting systems — Powder systems — Part 2: Design, construction and maintenance |
— |
1.4.2002 |
1.4.2004 |
|
CEN |
EN 12446:2003 Chimneys — Components — Concrete outer wall elements |
— |
1.2.2004 |
1.2.2005 |
|
CEN |
EN 12566-1:2000 Small wastewater treatment systems for up to 50 PT — Part 1: Prefabricated septic tanks |
— |
— |
|
|
EN 12566-1:2000/A1:2003 |
|
1.12.2004 |
1.12.2005 |
|
|
CEN |
EN 12620:2002 Aggregates for concrete |
— |
1.7.2003 |
1.6.2004 |
|
CEN |
EN 12676-1:2000 Anti-glare systems for roads — Part 1: Performance and characteristics |
— |
— |
|
|
EN 12676-1:2000/A1:2003 |
|
1.2.2004 |
1.2.2006 |
|
|
CEN |
EN 12764:2004 Sanitary appliances — Specification for whirlpool baths |
— |
1.10.2005 |
1.10.2006 |
|
CEN |
EN 12809:2001 Residential independent boilers fired by solid fuel — Nominal heat output up to 50 kW — Requirements and test methods |
— |
1.7.2005 |
1.7.2006 |
|
EN 12809:2001/A1:2004 |
|
1.7.2005 |
1.7.2006 |
|
|
CEN |
EN 12815:2001 Residential cookers fired by solid fuel — Requirements and test methods |
— |
1.7.2005 |
1.7.2006 |
|
EN 12815:2001/A1:2004 |
|
1.7.2005 |
1.7.2006 |
|
|
CEN |
EN 12839:2001 Precast concrete products — Elements for fences |
— |
1.3.2002 |
1.3.2003 |
|
CEN |
EN 12843:2004 Precast concrete products — Masts and poles |
— |
1.9.2005 |
1.9.2006 |
|
CEN |
EN 12859:2001 Gypsum blocks — Definitions, requirements and test methods |
— |
1.4.2002 |
1.4.2003 |
|
EN 12859:2001/A1:2004 |
|
1.6.2005 |
1.6.2005 |
|
|
CEN |
EN 12860:2001 Gypsum based adhesives for gypsum blocks — Definitions, requirements and test methods |
— |
1.4.2002 |
1.4.2003 |
|
CEN |
EN 12951:2004 Prefabricated accessories for roofing — Permanently fixed roof ladders — Product specification and test methods |
— |
1.9.2005 |
1.9.2006 |
|
CEN |
EN 13024-2:2004 Glass in building — Thermally toughened borosilicate safety glass — Part 2: Evaluation of conformity/Product standard |
— |
1.9.2005 |
1.9.2006 |
|
CEN |
EN 13043:2002 Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked areas |
— |
1.7.2003 |
1.6.2004 |
|
CEN |
EN 13055-1:2002 Lightweight aggregates — Part 1: Lightweight aggregates for concrete, mortar and grout |
— |
1.3.2003 |
1.6.2004 |
|
CEN |
EN 13055-2:2004 Lightweight aggregates — Part 2: Lightweight aggregates for bituminous mixtures and surface treatments and for unbound and bound applications |
— |
1.5.2005 |
1.5.2006 |
|
CEN |
EN 13101:2002 Steps for underground man entry chambers — Requirements, marking, testing and evaluation of conformity |
— |
1.8.2003 |
1.8.2004 |
|
CEN |
EN 13139:2002 Aggregates for mortar |
— |
1.3.2003 |
1.6.2004 |
|
CEN |
EN 13160-1:2003 Leak detection systems — Part 1: General principles |
— |
1.3.2004 |
1.3.2005 |
|
CEN |
EN 13162:2001 Thermal insulation products for buildings — Factory made mineral wool (MW) products — Specification |
— |
1.3.2002 |
1.3.2003 |
|
CEN |
EN 13163:2001 Thermal insulation products for buildings — Factory made products of expanded polystyrene (EPS) — Specification |
— |
1.3.2002 |
1.3.2003 |
|
CEN |
EN 13164:2001 Thermal insulation products for buildings — Factory made products of extruded polystyrene foam (XPS) — Specification |
— |
1.3.2002 |
1.3.2003 |
|
EN 13164:2001/A1:2004 |
|
1.12.2004 |
1.12.2004 |
|
|
CEN |
EN 13165:2001 Thermal insulation products for buildings — Factory made rigid polyurethane foam (PUR) products — Specification |
— |
1.3.2002 |
1.3.2003 |
|
EN 13165:2001/A1:2004 |
— |
1.12.2004 |
1.12.2004 |
|
|
CEN |
EN 13166:2001 Thermal insulation products for buildings — Factory made products of phenolic foam (PF) — Specification |
— |
1.3.2002 |
1.3.2003 |
|
EN 13166:2001/A1:2004 |
— |
1.12.2004 |
1.12.2004 |
|
|
CEN |
EN 13167:2001 Thermal insulation products for buildings — Factory made cellular glass (CG) products — Specification |
— |
1.3.2002 |
1.3.2003 |
|
EN 13167:2001/A1:2004 |
— |
1.12.2004 |
1.12.2004 |
|
|
CEN |
EN 13168:2001 Thermal insulation products for buildings — Factory made wood wool (WW) products — Specification |
— |
1.3.2002 |
1.3.2003 |
|
EN 13168:2001/A1:2004 |
— |
1.12.2004 |
1.12.2004 |
|
|
CEN |
EN 13169:2001 Thermal insulation products for buildings — Factory made products of expanded perlite (EPB) — Specification |
— |
1.3.2002 |
1.3.2003 |
|
EN 13169:2001/A1:2004 |
— |
1.12.2004 |
1.12.2004 |
|
|
CEN |
EN 13170:2001 Thermal insulation products for buildings — Factory made products of expanded cork (ICB) — Specification |
— |
1.3.2002 |
1.3.2003 |
|
CEN |
EN 13171:2001 Thermal insulating products for buildings — Factory made wood fibre (WF) products — Specification |
— |
1.3.2002 |
1.3.2003 |
|
EN 13171:2001/A1:2004 |
— |
1.12.2004 |
1.12.2004 |
|
|
CEN |
EN 13224:2004 Precast concrete products — Ribbed floor elements |
— |
1.9.2005 |
1.9.2007 |
|
EN 13224:2004/AC:2005 |
|
|
|
|
|
CEN |
EN 13225:2004 Precast concrete products — Linear structural elements |
— |
1.9.2005 |
1.9.2007 |
|
CEN |
EN 13229:2001 Inset appliances including open fires fired by solid fuels — Requirements and test methods |
— |
1.7.2005 |
1.7.2006 |
|
EN 13229:2001/A2:2004 |
|
1.7.2005 |
1.7.2006 |
|
|
CEN |
EN 13240:2001 Room heaters fired by solid fuel — Requirements and test methods |
— |
1.7.2005 |
1.7.2006 |
|
EN 13240:2001/A2:2004 |
|
1.7.2005 |
1.7.2006 |
|
|
CEN |
EN 13241-1:2003 Industrial, commercial and garage doors and gates — Product standard — Part 1: Products without fire resistance or smoke control characteristics |
— |
1.5.2004 |
1.5.2005 |
|
CEN |
EN 13242:2002 Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction |
— |
1.10.2003 |
1.6.2004 |
|
CEN |
EN 13249:2000 Geotextiles and geotextile-related products — Characteristics required for use in the construction of roads and other trafficked areas (excluding railways and asphalt inclusion) |
— |
1.10.2001 |
1.10.2002 |
|
EN 13249:2000/A1:2005 |
|
1.11.2005 |
1.11.2006 |
|
|
CEN |
EN 13250:2000 Geotextiles and geotextile-related products — Characteristics required for use in the construction of railways |
— |
1.10.2001 |
1.10.2002 |
|
CEN |
EN 13251:2000 Geotextiles and geotextile-related products — Characteristics required for use in earthworks, foundations and retaining structures |
— |
1.10.2001 |
1.10.2002 |
|
CEN |
EN 13252:2000 Geotextiles and geotextile-related products — Characteristics required for use in drainage systems |
— |
1.10.2001 |
1.10.2002 |
|
CEN |
EN 13253:2000 Geotextiles and geotextile-related products — Characteristics required for use in erosion control works (coastal protection, bank revetments) |
— |
1.10.2001 |
1.10.2002 |
|
CEN |
EN 13254:2000 Geotextiles and geotextile-related products — Characteristics required for use in the construction of reservoirs and dams |
— |
1.10.2001 |
1.10.2002 |
|
CEN |
EN 13255:2000 Geotextiles and geotextile-related products — Characteristics required for use in the construction of canals |
— |
1.10.2001 |
1.10.2002 |
|
CEN |
EN 13256:2000 Geotextiles and geotextile-related products — Characteristics required for use in the construction of tunnels and underground structures |
— |
1.10.2001 |
1.10.2002 |
|
CEN |
EN 13257:2000 Geotextiles and geotextile-related products — Characteristics required for use in solid waste disposals |
— |
1.10.2001 |
1.10.2002 |
|
CEN |
EN 13265:2000 Geotextiles and geotextile-related products — Characteristics required for use in liquid waste containment projects |
— |
1.10.2001 |
1.10.2002 |
|
CEN |
EN 13310:2003 Kitchen sinks — Functional requirements and test methods |
— |
1.2.2004 |
1.2.2005 |
|
CEN |
EN 13361:2004 Geosynthetic barriers — Characteristics required for use in the construction of reservoirs and dams |
— |
1.9.2005 |
1.9.2006 |
|
CEN |
EN 13383-1:2002 Armourstone — Part 1: Specification |
— |
1.3.2003 |
1.6.2004 |
|
CEN |
EN 13450:2002 Aggregates for railway ballast |
— |
1.10.2003 |
1.6.2004 |
|
CEN |
EN 13454-1:2004 Binders, composite binders and factory made mixtures for floor screeds based on calcium sulfate — Part 1: Definitions and requirements |
— |
1.7.2005 |
1.7.2006 |
|
CEN |
EN 13479:2004 Welding consumables — General product standard for filler metals and fluxes for fusion welding of metallic materials |
— |
1.10.2005 |
1.10.2006 |
|
CEN |
EN 13491:2004 Geosynthetic barriers — Characteristics required for use as a fluid barrier in the construction of tunnels and underground structures |
— |
1.9.2005 |
1.9.2006 |
|
CEN |
EN 13492:2004 Geosynthetic barriers — Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment |
— |
1.9.2005 |
1.9.2006 |
|
CEN |
EN 13502:2002 Chimneys — Requirements and test methods for clay/ceramic flue terminals |
— |
1.8.2003 |
1.8.2004 |
|
CEN |
EN 13561:2004 External blinds — Performance requirements including safety |
— |
1.3.2005 |
1.3.2006 |
|
CEN |
EN 13564-1:2002 Anti-flooding devices for buildings — Part 1: Requirements |
— |
1.5.2003 |
1.5.2004 |
|
CEN |
EN 13565-1:2003 Fixed firefighting systems — Foam systems — Part 1: Requirements and test methods for components |
— |
1.12.2004 |
1.3.2007 |
|
CEN |
EN 13616:2004 Overfill prevention devices for static tanks for liquid petroleum fuels |
— |
1.5.2005 |
1.5.2006 |
|
CEN |
EN 13659:2004 Shutters — Performance requirements including safety |
— |
1.4.2005 |
1.4.2006 |
|
CEN |
EN 13693:2004 Precast concrete products — Special roof elements |
— |
1.6.2005 |
1.6.2006 |
|
CEN |
EN 13707:2004 Flexible sheets for waterproofing — Reinforced bitumen sheets for roof waterproofing — Definitions and characteristics |
— |
1.9.2005 |
1.9.2006 |
|
CEN |
EN 13748-1:2004 Terrazzo tiles — Part 1: Terrazzo tiles for internal use |
— |
1.6.2005 |
1.6.2006 |
|
EN 13748-1:2004/AC:2005 |
|
|
|
|
|
CEN |
EN 13748-2:2004 Terrazzo tiles — Part 2: Terrazzo tiles for external use |
— |
1.4.2005 |
1.4.2006 |
|
CEN |
EN 13813:2002 Screed material and floor screeds — Screed material — Properties and requirements |
— |
1.8.2003 |
1.8.2004 |
|
CEN |
EN 13830:2003 Curtain walling — Product standard |
— |
1.12.2004 |
1.12.2005 |
|
CEN |
EN 13859-2:2004 Flexible sheets for waterproofing — Definitions and characteristics of underlays — Part 2: Underlays for walls |
— |
1.9.2005 |
1.9.2006 |
|
CEN |
EN 13877-3:2004 Concrete pavements — Part 3: Specifications for dowels to be used in concrete pavements |
— |
1.9.2005 |
1.9.2006 |
|
CEN |
EN 13964:2004 Suspended ceilings — Requirements and test methods |
— |
1.1.2005 |
1.1.2006 |
|
CEN |
EN 13967:2004 Flexible sheets for waterproofing — Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet — Definitions and characteristics |
— |
1.10.2005 |
1.10.2006 |
|
CEN |
EN 13969:2004 Flexible sheets for waterproofing — Bitumen damp proof sheets including bitumen basement tanking sheets — Definitions and characteristics |
— |
1.9.2005 |
1.9.2006 |
|
CEN |
EN 13970:2004 Flexible sheets for waterproofing — Bitumen water vapour control layers — Definitions and characteristics |
— |
1.9.2005 |
1.9.2006 |
|
CEN |
EN 13984:2004 Flexible sheets for waterproofing — Plastic and rubber vapour control layers — Definitions and characteristics |
— |
1.9.2005 |
1.9.2006 |
|
CEN |
EN 13986:2004 Wood-based panels for use in construction — Characteristics, evaluation of conformity and marking |
EN 13986:2002 |
1.6.2005 |
1.6.2006 |
|
CEN |
EN 14016-1:2004 Binders for magnesite screeds — Caustic magnesia and magnesium chloride — Part 1: Definitions, requirements |
— |
1.12.2004 |
1.12.2005 |
|
CEN |
EN 14037-1:2003 Ceiling mounted radiant panels supplied with water at temperature below 120 C — Part 1: Technical specifications and requirements |
— |
1.2.2004 |
1.2.2005 |
|
CEN |
EN 14041:2004 Resilient, textile and laminate floor coverings — Essential characteristics |
— |
1.6.2005 |
1.6.2006 |
|
CEN |
EN 14063-1:2004 Thermal insulation materials and products — In-situ formed expanded clay lightweight aggregate products (LWA) — Part 1: Specification for the loose-fill products before installation |
— |
1.6.2005 |
1.6.2006 |
|
CEN |
EN 14178-2:2004 Glass in building — Basic alkaline earth silicate glass products — Part 2: Evaluation of conformity/Product standard |
— |
1.9.2005 |
1.9.2006 |
|
CEN |
EN 14188-1:2004 Joint fillers and sealants — Part 1: Specifications for hot applied sealants |
— |
1.7.2005 |
1.7.2006 |
|
CEN |
EN 14188-2:2004 Joint fillers and sealants — Part 2: Specifications for cold applied sealants |
— |
1.10.2005 |
1.10.2006 |
|
CEN |
EN 14216:2004 Cement — Composition, specifications and conformity criteria for very low heat special cements |
— |
1.2.2005 |
1.2.2006 |
|
CEN |
EN 14250:2004 Timber structures — Product requirements for prefabricated structural members assembled with punched metal plate fasteners |
— |
1.9.2005 |
1.9.2006 |
|
CEN |
EN 14316-1:2004 Thermal insulation products for buildings — In-situ thermal insulation formed from expanded perlite (EP) products — Part 1: Specification for bonded and loose-fill products before installation |
— |
1.6.2005 |
1.6.2006 |
|
CEN |
EN 14317-1:2004 Thermal insulation products for buildings — In-situ thermal insulation formed from exfoliated vermiculite (EV) products — Part 1: Specification for bonded and loose-fill products before installation |
— |
1.6.2005 |
1.6.2006 |
|
CEN |
EN 14374:2004 Timber structures — Structural laminated veneer lumber — Requirements |
— |
1.9.2005 |
1.9.2006 |
|
CEN |
EN 14396:2004 Fixed ladders for manholes |
— |
1.12.2004 |
1.12.2005 |
|
CEN |
EN 14411:2003 Ceramic tiles — Definitions, classification, characteristics and marking (ISO 13006:1998, modified) |
— |
1.12.2004 |
1.12.2005 |
|
CEN |
EN 14428:2004 Shower enclosures — Functional requirements and test methods |
— |
1.9.2005 |
1.9.2006 |
|
CEN |
EN 14716:2004 Stretched ceilings — Requirements and test methods |
— |
1.10.2005 |
1.10.2006 |
NOTE:
|
— |
Any information concerning the availability of the standards can be obtained either from the European Standardisation Organisations or from the national standardisation bodies of which the list is annexed to the Directive 98/34/EC (4) of the European Parliament and Council amended by the Directive 98/48/EC (5). |
|
— |
Publication of the references in the Official Journal of the European Union does not imply that the standards are available in all the Community languages. |
|
— |
This list replaces all the previous lists published in the Official Journal of the European Union. The Commission ensures the updating of this list. |
More information about harmonised standards on the Internet at
http://europa.eu.int/comm/enterprise/newapproach/standardization/harmstds/
ESO: European Standardisation Organisation:
CEN:
CENELEC:
ETSI:
(2) The date of the end of the co-existence period is the same as the date of withdrawal of conflicting national technical specifications, after which presumption of conformity must be based upon harmonised European specifications (harmonised standards or European Technical Approvals)
(3) In case of amendments, the referenced standard is EN CCCCC:YYYY, its previous amendments, if any, and the new, quoted amendment.
(4) OJ L 204, 21.7.1998, p.37.
(5) OJ L 217, 5.8.1998, p. 18.