EUR-Lex Access to European Union law
This document is an excerpt from the EUR-Lex website
Document 32020R0918
Commission Implementing Regulation (EU) 2020/918 of 1 July 2020 establishing a derogation from Implementing Regulation (EU) 2019/2072 as regards the requirements for the introduction into the Union of ash wood originating or processed in Canada
Commission Implementing Regulation (EU) 2020/918 of 1 July 2020 establishing a derogation from Implementing Regulation (EU) 2019/2072 as regards the requirements for the introduction into the Union of ash wood originating or processed in Canada
Commission Implementing Regulation (EU) 2020/918 of 1 July 2020 establishing a derogation from Implementing Regulation (EU) 2019/2072 as regards the requirements for the introduction into the Union of ash wood originating or processed in Canada
C/2020/4293
IO L 209, 2.7.2020, p. 14–18
(BG, ES, CS, DA, DE, ET, EL, EN, FR, HR, IT, LV, LT, HU, MT, NL, PL, PT, RO, SK, SL, FI, SV)
No longer in force, Date of end of validity: 30/06/2023
Relation | Act | Comment | Subdivision concerned | From | To |
---|---|---|---|---|---|
Derogation | 32019R2072 | iarscríbhinn VII pointe 87 pointe (a) | 01/07/2020 | 30/06/2023 | |
Derogation | 32019R2072 | iarscríbhinn VII pointe 87 pointe (b) | 01/07/2020 | 30/06/2023 | |
Derogation | 32019R2072 | airteagal 8 mír 1 | 01/07/2020 | 30/06/2023 |
2.7.2020 |
EN |
Official Journal of the European Union |
L 209/14 |
COMMISSION IMPLEMENTING REGULATION (EU) 2020/918
of 1 July 2020
establishing a derogation from Implementing Regulation (EU) 2019/2072 as regards the requirements for the introduction into the Union of ash wood originating or processed in Canada
THE EUROPEAN COMMISSION,
Having regard to the Treaty on the Functioning of the European Union,
Having regard to Regulation (EU) 2016/2031 of the European Parliament and the Council of 26 October 2016 on protective measures against pests of plants, amending Regulations (EU) No 228/2013, (EU) No 652/2014 and (EU) No 1143/2014 of the European Parliament and of the Council and repealing Council Directives 69/464/EEC, 74/647/EEC, 93/85/EEC, 98/57/EC, 2000/29/EC, 2006/91/EC and 2007/33/EC (1), and in particular Article 41(2) thereof,
Whereas:
(1) |
Commission Implementing Decision (EU) 2016/412 (2) authorises Member States to provide for a temporary derogation from certain provisions of Council Directive 2000/29/EC (3) in respect of special conditions concerning the introduction into the Union of ash (Fraxinus L.) wood, originating or processed in Canada. |
(2) |
Directive 2000/29/EC has been repealed and replaced by Regulation (EU) 2016/2031. Commission Implementing Regulation 2019/2072 (4) setting out rules and requirements concerning the introduction into the Union of certain plants, plant products or other objects has replaced Annexes I to V to that Directive. |
(3) |
Pursuant to Article 8(1) of Regulation (EU) 2019/2072, in conjunction with point 87 of Annex VII to that Regulation, the introduction into the Union of ash wood, originating or processed in Canada (‘the specified wood’), is subject to certain special requirements to avoid the risk of infestation into the Union by the pest Agrilus planipennis Fairmaire. Those requirements differ to a certain extent from the requirements set out in Implementing Decision (EU) 2016/412, as regards the introduction into the Union of the specified wood, its inspection and supervision. |
(4) |
On the basis of a Commission audit carried out in June 2018, it has been concluded that by applying under its official control the requirements laid down in Implementing Decision (EU) 2016/412, Canada ensures a level of phytosanitary protection which is equivalent to that provided by the requirements set out in point 87 of Annex VII to Implementing Regulation (EU) 2019/2072. |
(5) |
Implementing Decision (EU) 2016/412 is to apply until 30 of June 2020. On 27 April 2020, Canada requested a prolongation of that derogation after 30 June 2020. |
(6) |
In order to guarantee the continuing imports of ash wood, originating or processed in Canada, it is appropriate to provide for a derogation from Article 8(1) and points 87(a) and (b) of Annex VII to Implementing Regulation (EU) 2019/2072, so as to allow the introduction of the specified wood into the Union subject to compliance with special requirements reflecting, with a few adaptations, those set out in Implementing Decision (EU) 2016/412. |
(7) |
This Regulation should apply from 1 July 2020, in order to ensure the continuation of imports of the specified wood. |
(8) |
This Regulation should apply until 30 June 2023, in order to allow for the review of its application by that date. |
(9) |
The measures provided for in this Regulation are in accordance with the opinion of the Standing Committee on Plants, Animals, Food and Feed, |
HAS ADOPTED THIS REGULATION:
Article 1
Special requirements for a temporary derogation
By way of derogation from Article 8(1) and point 87(a) and (b) of Annex VII to Implementing Regulation (EU) 2019/2072, the introduction into the Union of ash (Fraxinus L.) wood originating or processed in Canada (‘the specified wood’), shall be subject to compliance with the special requirements set out in Article 2 and Part A of the Annex to this Regulation.
‘Specified wood’ is referred to in Part B of the Annex.
Article 2
Phytosanitary certificate
1. The specified wood shall be accompanied by a phytosanitary certificate issued in Canada, certifying freedom from Union quarantine pests and pests not listed as Union quarantine pests, subject to the measures adopted pursuant to Article 30 of Regulation (EU) 2016/2031 after inspection.
2. The phytosanitary certificate shall include under the heading ‘Additional declaration’ the following elements:
(a) |
the statement ‘In accordance with European Union requirements laid down in Commission Implementing Regulation (EU) 2020/918’; |
(b) |
the bundle number(s) corresponding to each specific bundle being exported; |
(c) |
the name of the approved facility(ies) in Canada. |
Article 3
Date of expiry
This Regulation shall expire on 30 June 2023.
Article 4
Entry into force and date of application
This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.
It shall apply from 1 July 2020.
This Regulation shall be binding in its entirety and directly applicable in all Member States.
Done at Brussels, 1 July 2020.
For the Commission
The President
Ursula VON DER LEYEN
(1) OJ L 317, 23.11.2016, p. 4.
(2) Commission Implementing Decision (EU) 2016/412 of 17 March 2016 authorising Member States to provide for a temporary derogation from certain provisions of Council Directive 2000/29/EC in respect of ash wood originating or processed in Canada (OJ L 74, 19.3.2016, p. 41).
(3) Council Directive 2000/29/EC of 8 May 2000 on protective measures against the introduction into the Community of organisms harmful to plants or plant products and against their spread within the Community (OJ L 169, 10.7.2000, p. 1).
(4) Commission Implementing Regulation (EU) 2019/2072 of 28 November 2019 establishing uniform conditions for the implementation of Regulation (EU) 2016/2031 of the European Parliament and the Council, as regards protective measures against pests of plants, and repealing Commission Regulation (EC) No 690/2008 and amending Commission Implementing Regulation (EU) 2018/2019 (OJ L 319, 10.12.2019, p. 1).
ANNEX
PART A
1. Processing requirements
The processing of the specified wood, as referred to in Article 1 must fulfil all the following requirements:
(a) Debarking
The specified wood is debarked, with the exception of any number of visually separate and clearly distinct small pieces of bark which comply with one of the following requirements:
(1) |
they are less than 3 cm in width (regardless of length); or |
(2) |
if they are greater than 3 cm in width, the total surface area of each individual piece of bark is less than 50 cm2. |
(b) Sawing
The specified sawn wood is produced from debarked round wood.
(c) Heat treatment
The specified wood is heated through its profile to at least 71 °C for 1 200 minutes in a heat chamber approved by the Canadian Food Inspection Agency (CFIA), or an agency approved by CFIA.
(d) Drying
The specified wood is dried following industrial drying schedules of at least two-week duration, recognised by CFIA.
The final moisture content of the wood shall not exceed 10 % expressed as a percentage of dry matter.
2. Requirements for facilities
The specified wood must be produced, handled or stored in a facility which fulfils all the following requirements:
(a) |
it is officially approved by CFIA pursuant to its certification programme concerning the pest Agrilus planipennis Fairmaire; |
(b) |
it is registered in a database published on the CFIA website; |
(c) |
it is audited by CFIA, or an agency approved by CFIA, at least once per month and it has been concluded that it complies with the requirements of this Annex. In the case these audits are performed by an agency approved by CFIA, CFIA must carry out six-monthly audits of this work. The six-monthly audits shall include the verification of the procedures and documentation of the agency and audits at approved facilities; |
(d) |
it uses equipment for the treatment of wood which has been calibrated consistently with the equipment’s manual of operation; |
(e) |
it keeps records of its procedures for verification by CFIA or an agency approved by CFIA, including the duration of treatment, temperatures during treatment and for each specific bundle to be exported, the compliance check and final moisture content. |
3. Labelling
Each bundle of the specified wood must visibly display both a bundle number and a label with the words ‘HT-KD’ or ‘Heat Treated-Kiln Dried’. That label must be issued by, or under the supervision of, a designated officer of the approved facility after verifying that the processing requirements set out in point 1 and the requirements for facilities set out in point 2 have been complied with.
4. Pre-export inspections
The specified wood destined for the Union must be inspected by CFIA, or an agency officially approved by CFIA, to ensure that the requirements laid down in points 1 and 3 are met.
PART B
Specified wood with their respective CN codes
1. |
Wood of Fraxinus L., other than in the form of
but including wood which has not kept its natural round surface, and furniture and other objects made of untreated wood |
ex 4401 12 00 ex 4403 12 00 ex 4403 99 00 ex 4404 20 00 ex 4406 12 00 ex 4406 92 00 4407 95 10 4407 95 91 4407 95 99 ex 4407 99 27 ex 4407 99 40 ex 4407 99 90 ex 4408 90 15 ex 4408 90 35 ex 4408 90 85 ex 4408 90 95 ex 4416 00 00 ex 9406 10 00 |