02012R0932-20170109

EUR-Lex

Access to European Union law

This document is an excerpt from the EUR-Lex website

EUROPA
EUR-Lex home
EUR-Lex - 02012R0932-20170109 - EN

Help

Search tips

Need more search options? Use the Advanced search

Document 02012R0932-20170109

Consolidated text: Commission Regulation (EU) No 932/2012 of 3 October 2012 implementing Directive 2009/125/EC of the European Parliament and of the Council with regard to ecodesign requirements for household tumble driers (Text with EEA relevance)

Access initial legal act

ELI: http://data.europa.eu/eli/reg/2012/932/2017-01-09

Date of document:: 09/01/2017
Date of effect:: 09/01/2017

Author:: Not available
Form:: Téacs comhdhlúite
Additional information:: LASTMODIN 32016R2282

Link
Link
Link: Select all documents mentioning this document
Consolidation: basic act:: 32012R0932

HTML

PDF

02012R0932 — EN — 09.01.2017 — 001.001

This text is meant purely as a documentation tool and has no legal effect. The Union's institutions do not assume any liability for its contents. The authentic versions of the relevant acts, including their preambles, are those published in the Official Journal of the European Union and available in EUR-Lex. Those official texts are directly accessible through the links embedded in this document

►B	COMMISSION REGULATION (EU) No 932/2012 of 3 October 2012 implementing Directive 2009/125/EC of the European Parliament and of the Council with regard to ecodesign requirements for household tumble driers (Text with EEA relevance) (OJ L 278 12.10.2012, p. 1)

Amended by:

		Official Journal
		No	page	date
►M1	COMMISSION REGULATION (EU) 2016/2282 of 30 November 2016	L 346	51	20.12.2016

▼B

COMMISSION REGULATION (EU) No 932/2012

of 3 October 2012

implementing Directive 2009/125/EC of the European Parliament and of the Council with regard to ecodesign requirements for household tumble driers

(Text with EEA relevance)

Article 1

Subject matter and scope

This Regulation establishes ecodesign requirements for the placing on the market of electric mains-operated and gas-fired household tumble driers and built-in household tumble driers, including those sold for non-household use.

This Regulation shall not apply to household combined washer-driers and household spin-extractors.

Article 2

Definitions

In addition to the definitions set out in Article 2 of Directive 2009/125/EC, the following definitions shall apply for the purpose of this Regulation:

(1)

‘household tumble drier’ means an appliance in which textiles are dried by tumbling in a rotating drum through which heated air is passed and which is designed to be used principally for non-professional purposes;

(2)

‘built-in household tumble drier’ means a household tumble drier intended to be installed in a cabinet, a prepared recess in a wall or a similar location, requiring furniture finishing;

(3)

‘household combined washer-drier’ means a household washing machine which includes both a spin extraction function and also a means for drying the textiles, usually by heating and tumbling;

(4)

‘household spin-extractor’, also known commercially as ‘spin-drier’, means an appliance in which water is removed from the textiles by centrifugal action in a rotating drum and drained through an automatic pump and which is designed to be used principally for non-professional purposes;

(5)

‘air-vented tumble drier’ means a tumble drier that draws in fresh air, passes it over the textiles and vents the resulting moist air into the room or outside;

(6)

‘condenser tumble drier’ means a tumble drier which includes a device (either using condensation or any other means) for removing moisture from the air used for the drying process;

(7)

‘automatic tumble drier’ means a tumble drier which switches off the drying process when a certain moisture content of the load is detected, for example through conductivity or temperature sensing;

(8)

‘non-automatic tumble drier’ means a tumble drier which switches off the drying process after a predefined period, usually controlled by a timer, but which may also be manually switched off;

(9)

‘programme’ means a series of operations that are predefined and which are declared by the manufacturer as suitable for drying certain types of textile;

(10)

‘cycle’ means a complete drying process, as defined for the selected programme;

(11)

‘programme time’ means the time that elapses from the initiation of the programme until the completion of the programme, excluding any end-user programmed delay;

(12)

‘rated capacity’ means the maximum mass in kilograms, indicated by the manufacturer in 0,5 kilogram increments of dry textiles of a particular type, which can be treated in a household tumble drier with the selected programme, when loaded in accordance with the manufacturer’s instructions;

(13)

‘partial load’ means half of the rated capacity of a household tumble drier for a given programme;

(14)

‘condensation efficiency’ means the ratio between the mass of moisture condensed by a condenser tumble drier and the mass of moisture removed from the load at the end of a cycle;

(15)

‘off-mode’ means a condition where the household tumble drier is switched off using appliance controls or switches accessible to and intended for operation by the end-user during normal use to attain the lowest power consumption that may persist for an indefinite time while the household tumble drier is connected to a power source and used in accordance with the manufacturer’s instructions; where there is no control or switch accessible to the end-user, ‘off-mode’ means the condition reached after the household tumble drier reverts to a steady-state power consumption on its own;

(16)

‘left-on mode’ means the lowest power consumption mode that may persist for an indefinite time after completion of the programme without any further intervention by the end-user besides unloading of the household tumble drier;

(17)

‘equivalent household tumble drier’ means a model of household tumble drier placed on the market with the same rated capacity, technical and performance characteristics, energy consumption, condensation efficiency where relevant, standard cotton programme time and airborne acoustical noise emissions during drying as another model of household tumble drier placed on the market under a different commercial code number by the same manufacturer.

(18)

‘standard cotton programme’ means the cycle which dries cotton laundry with an initial moisture content of the load of 60 % up to a remaining moisture content of the load of 0 %.

Article 3

Ecodesign requirements

The generic ecodesign requirements for household tumble driers are set out in point 1 of Annex I. The specific ecodesign requirements for household tumble driers are set out in point 2 of Annex I.

No ecodesign requirement is necessary regarding any other ecodesign parameter referred to in Annex I, Part 1, of Directive 2009/125/EC.

Article 4

Conformity assessment

The conformity assessment procedure referred to in Article 8 of Directive 2009/125/EC shall be the internal design control set out in Annex IV to that Directive or the management system set out in Annex V to that Directive.

For the purposes of conformity assessment pursuant to Article 8 of Directive 2009/125/EC, the technical documentation shall include a copy of the calculations set out in Annex II to this Regulation.

Where the information included in the technical documentation for a particular household tumble drier model has been obtained by calculation on the basis of design or by extrapolation from other equivalent household tumble driers, or both, the technical documentation shall include details of such calculations or extrapolations, or both, and of tests undertaken by manufacturers to verify the accuracy of the calculations undertaken. In such cases, the technical documentation shall also include a list of all other equivalent household tumble drier models where the information included in the technical documentation was obtained in the same way.

Article 5

Verification procedure for market surveillance purposes

Member States shall apply the verification procedure described in Annex III to this Regulation when performing the market surveillance checks referred to in Article 3(2) of Directive 2009/125/EC for compliance with requirements set out in Annex I to this Regulation.

Article 6

Benchmarks

The indicative benchmarks for best-performing household tumble driers available on the market at the time of entry into force of this Regulation are set out in Annex IV.

Article 7

Revision

The Commission shall review this Regulation in the light of technological progress no later than five years after its entry into force and present the result of that review to the Ecodesign Consultation Forum. The review shall in particular assess the verification tolerances set out in Annex III and the efficiency of air-vented appliances.

Article 8

Entry into force and application

This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.

It shall apply from 1 November 2013.

However:

(a)

the generic ecodesign requirements set out in points 1.1 and 1.2 of Annex I shall apply from 1 November 2014;

(b)

the specific ecodesign requirements set out in point 2.2 of Annex I shall apply from 1 November 2015.

This Regulation shall be binding in its entirety and directly applicable in all Member States.

ANNEX I

Ecodesign requirements

1. Generic ecodesign requirements

1.1. For the calculation of the energy consumption and other parameters for household tumble driers, the cycle which dries cotton laundry (with an initial moisture content of the load of 60 %) up to a remaining moisture content of the load of 0 % (hereinafter the ‘standard cotton programme’) shall be used. That cycle shall be clearly identifiable on the programme selection device(s) of the household tumble drier or the household tumble drier display, if any, or both, and indicated as ‘standard cotton programme’ or by a uniform symbol or an appropriate combination thereof, and shall be set as the default cycle for household tumble driers equipped with automatic programme selection or any function for automatically selecting a drying programme or maintaining the selection of a programme. If the tumble drier is automatic tumble drier the ‘standard cotton programme’ shall be automatic.

1.2. The booklet of instructions provided by the manufacturer shall provide:

(a)

information about the ‘standard cotton programme’ and shall specify that it is suitable to dry normal wet cotton laundry and that it is the most efficient programme in terms of energy consumption for drying wet cotton laundry;

(b)

the power consumption of the off-mode and the left-on mode;

(c)

indicative information on the programme time and energy consumption for the main drying programmes at both full, and, if applicable, partial load;

2. Specific ecodesign requirements

Household tumble driers shall comply with the following requirements:

2.1. From 1 November 2013:

—

the energy efficiency index (EEI) shall be less than 85,

—

for condenser household tumble driers the weighted condensation efficiency shall be not lower than 60 %.

2.2. From 1 November 2015:

—

for condenser household tumble driers the energy efficiency index (EEI) shall be less than 76,

—

for condenser household tumble driers, the weighted condensation efficiency shall be not lower than 70 %.

The energy efficiency index (EEI) and the weighted condensation efficiency are calculated in accordance with Annex II.

ANNEX II

Method for calculating the energy efficiency index and weighted condensation efficiency

1. CALCULATION OF THE ENERGY EFFICIENCY INDEX

For the calculation of the energy efficiency index (EEI) of a household tumble drier model, the weighted annual energy consumption of a household tumble drier for the standard cotton programme at full and partial load is compared to its standard annual energy consumption.

(a) The energy efficiency index (EEI) is calculated as follows and rounded to one decimal place:

where:

—	AEC = weighted annual energy consumption of the household tumble drier,

—	SAEC = standard annual energy consumption of the household tumble drier.

(b) The standard annual energy consumption (SAEC ) is calculated in kWh/year as follows and rounded to two decimal places:

—

for all household tumble driers that are not air-vented:

—

for air-vented household tumble driers:

where:

—

c is the rated capacity of the household tumble drier for the standard cotton programme,

—

Tt is the weighted programme time for the standard cotton programme.

(c) The weighted annual energy consumption (AEC ) is calculated in kWh/year as follows and is rounded to two decimal places:

(i)

where:

—	Et = weighted energy consumption, in kWh and rounded to two decimal places,

—	Po = power in ‘off-mode’ for the standard cotton programme at full load, in W and rounded to two decimal places,

—	Pl = power in ‘left-on mode’ for the standard cotton programme at full load, in W and rounded to two decimal places,

—	Tt = weighted programme time, in minutes and rounded to the nearest minute,

—	160 = total number of drying cycles per year.

(ii)

When the household tumble drier is equipped with a power management system, with the household tumble drier reverting automatically to ‘off-mode’ after the end of the programme, the weighted annual energy consumption (AEC ) is calculated taking into consideration the effective duration of the ‘left-on mode’, according to the following formula:

where:

—	Tl = duration of the ‘left-on mode’ for the standard cotton programme at full load, in minutes and rounded to the nearest minute.

(d) The weighted programme time (Tt ) for the standard cotton programme is calculated in minutes as follows and rounded to the nearest minute:

where:

—	Tdry = programme time for the standard cotton programme at full load, in minutes and rounded to the nearest minute,

—	Tdry½ = programme time for the standard cotton programme at partial load, in minutes and rounded to the nearest minute.

(e) The weighted energy consumption (Et ) is calculated in kWh as follows and rounded to two decimal places:

where:

—	Edry = energy consumption of the standard cotton programme at full load, in kWh and rounded to two decimal places,

—	Edry½ = energy consumption of the standard cotton programme at partial load, in kWh and rounded to two decimal places.

(f) For gas-fired household tumble driers, the energy consumption for the standard cotton programme at full and partial load is calculated in kWh, rounded to two decimal places, as:

where:

—	Egdry = gas consumption of the standard cotton programme at full load, in kWh and rounded to two decimal places,

—	Egdry½ = gas consumption of the standard cotton programme at partial load, in kWh and rounded to two decimal places,

—	Egdry,a = auxiliary electricity consumption of the standard cotton programme at full load, in kWh and rounded to two decimal places,

—	Egdry½,a = auxiliary electricity consumption of the standard cotton programme at partial load, in kWh and rounded to two decimal places,

—

fg = 2,5.

2. CALCULATION OF THE WEIGHTED CONDENSATION EFFICIENCY

The condensation efficiency of a programme is the ratio between the mass of moisture condensed and collected in the container of a condenser household tumble drier and the mass of moisture removed from the load by the programme, the latter being the difference between the mass of the wet test load before drying and the mass of the test load after drying. For calculating the weighted condensation efficiency, the average condensation efficiency of the standard cotton programme at both full and partial load is considered.

The weighted condensation efficiency (Ct ) of a programme is calculated as a percentage and rounded to the nearest whole percent as:

where:

—	Cdry = average condensation efficiency of the standard cotton programme at full load,

—	Cdry½ = average condensation efficiency of the standard cotton programme at partial load.

The average condensation efficiency C is calculated from the condensation efficiencies of test runs and expressed as a percentage:

where:

—

n is the number of test runs, comprising at least four valid test runs for the selected programme,

—

j is the test run number,

—

Wwj is the mass of water collected in the condenser reservoir during test run j,

—

Wi is the mass of the wet test load before drying,

—

Wf is the mass of the test load after drying.

▼M1

ANNEX III

Product compliance verification by market surveillance authorities

The verification tolerances defined in this Annex relate only to the verification of the measured parameters by Member State authorities and shall not be used by the manufacturer or importer as an allowed tolerance to establish the values in the technical documentation or in interpreting these values with a view to achieving compliance or to communicate better performance by any means.

When verifying the compliance of a product model with the requirements laid down in this Regulation pursuant to Article 3(2) of Directive 2009/125/EC, for the requirements referred to in this Annex, the authorities of the Member States shall apply the following procedure:

(1)

The Member State authorities shall verify one single unit of the model.

(2)

The model shall be considered to comply with the applicable requirements if:

(a)

the values given in the technical documentation pursuant to point 2 of Annex IV to Directive 2009/125/EC (declared values), and, where applicable, the values used to calculate these values, are not more favourable for the manufacturer or importer than the results of the corresponding measurements carried out pursuant to paragraph (g) thereof; and

(b)

the declared values meet any requirements laid down in this Regulation, and any required product information published by the manufacturer or importer does not contain values that are more favourable for the manufacturer or importer than the declared values; and

(c)

when the Member State authorities test the unit of the model, the determined values (the values of the relevant parameters as measured in testing and the values calculated from these measurements) comply with the respective verification tolerances as given in Table 1.

(3)

If the results referred to in point 2(a) or (b) are not achieved, the model and all models that have been listed as equivalent household tumble drier models in the manufacturer's or importer's technical documentation shall be considered not to comply with this Regulation.

(4)

If the result referred to in point 2(c) is not achieved, the Member State authorities shall select three additional units of the same model for testing. As an alternative, the three additional units selected may be of one or more different models that have been listed as equivalent models in the manufacturer's or importer's technical documentation.

(5)

The model shall be considered to comply with the applicable requirements if, for these three units, the arithmetical mean of the determined values complies with the respective verification tolerances given in Table 1.

(6)

If the result referred to in point 5 is not achieved, the model and all models that have been listed as equivalent household tumble drier models in the manufacturer's or importer's technical documentation shall be considered not to comply with this Regulation.

(7)

The Member State authorities shall provide all relevant information to the authorities of the other Member States and to the Commission without delay after a decision being taken on the non-compliance of the model according to points 3 and 6.

The Member State authorities shall use measurement procedures which take into account the generally recognised, state-of-the-art, reliable, accurate and reproducible measurement methods, including methods set out in documents whose reference numbers have been published for that purpose in the Official Journal of the European Union. The Member State authorities shall use the measurement and calculation methods set out in Annex II.

The Member State authorities shall only apply the verification tolerances that are set out in Table 1 and shall use only the procedure described in points 1 to 7 for the requirements referred to in this Annex. No other tolerances, such as those set out in harmonised standards or in any other measurement method, shall be applied.

Table 1

Verification tolerances

Parameters	Verification tolerances
Weighted annual energy consumption (AEC)	The determined value shall not exceed the declared value of AEC by more than 6 %.
Weighted energy consumption (Et)	The determined value shall not exceed the declared value of Et by more than 6 %.
Weighted condensation efficiency (Ct)	The determined value shall not be less than the declared value of Ct by more than 6 %.
Weighted programme time (Tt)	The determined values shall not exceed the declared values of Tt by more than 6 %.
Power consumption in off mode and left-on mode (Po and Pl )	The determined values of power consumption Po and Pl of more than 1,00 W shall not exceed the declared values of Po and Pl by more than 6 %. The determined values of power consumption Po and Pl of less than or equal to 1,00 W shall not exceed the declared values of Po and Pl by more than 0,10 W.
Duration of the left-on mode (Tl)	The determined value shall not exceed the declared value of Tl by more than 6 %.

▼B

ANNEX IV

Benchmarks

At the time of entry into force of this Regulation, the best available technology on the market for household tumble driers, in terms of their energy consumption and airborne acoustical noise emissions during drying for the standard cotton programme, is identified as follows:

(1)

Air-vented household tumble drier with a rated capacity of 3 kg:

(a)

energy consumption: 1,89 kWh/cycle for the standard cotton cycle at full load, equal to about 247 kWh/year ( *1 );

(b)

airborne acoustical noise emissions: 69 dB.

(2)

Air-vented household tumble drier with a rated capacity of 5 kg:

(a)

energy consumption: 2,70 kWh/cycle for the standard cotton cycle at full load, equal to about 347 kWh/year (*1) ;

(b)

airborne acoustical noise emissions: not available.

(3)

Gas fired air-vented household tumble driers with a rated capacity of 5 kg:

(a)

Gas energy consumption: 3,25 kWhGas/cycle equivalent to 1,3 kWh for the standard cotton cycle at full load. Annual energy consumption not available.

(b)

airborne noise emissions: not available.

(4)

Condenser household tumble drier with a rated capacity of 5 kg:

(a)

energy consumption: 3,10 kWh/cycle for the standard cotton cycle at full load, equal to about 396 kWh/year (*1) ;

(b)

airborne acoustical noise emissions: not available.

(5)

Air-vented household tumble drier with a rated capacity of 6 kg:

(a)

energy consumption: 3,84 kWh/cycle for the standard cotton cycle at full load, equal to about 487 kWh/year (*1) ;

(b)

airborne acoustical noise emissions: 67 dB.

(6)

Condenser household tumble drier with a rated capacity of 6 kg:

(a)

energy consumption: 1,58 kWh/cycle for the standard cotton cycle at full load, equal to about 209 kWh/year (*1) ;

(b)

airborne acoustical noise emissions: not available.

(7)

Air-vented household tumble drier with a rated capacity of 7 kg:

(a)

energy consumption: 3,9 kWh/cycle for the standard cotton cycle at full load, equal to about 495 kWh/year (*1) ;

(b)

airborne acoustical noise emissions: 65 dB.

(8)

Gas fired air-vented household tumble driers with a rated capacity of 7 kg:

(a)

Gas energy consumption: 3,4 kWhGas/cycle equivalent to 1,36 kWh for the standard cotton cycle at full load. Annual energy consumption not available.

(b)

airborne noise emissions: not available

(9)

Condenser household tumble drier with a rated capacity of 7 kg:

(a)

energy consumption: 1,6 kWh/cycle for the standard cotton cycle at full load, equal to about 211 kWh/year (*1) ;

(b)

airborne acoustical noise emissions: 65 dB.

(10)

Air-vented household tumble drier with a rated capacity of 8 kg:

(a)

energy consumption: 4,1 kWh/cycle for the standard cotton cycle at full load, equal to about 520 kWh/year (*);

(b)

airborne acoustical noise emissions: 65 dB.

(11)

Condenser household tumble drier with a rated capacity of 8 kg:

(a)

energy consumption: 2,30 kWh/cycle for the standard cotton cycle at full load, equal to about 297 kWh/year (*);

(b)

airborne acoustical noise emissions: not available.

( *1 ) Calculated assuming 160 drying cycles per year with an energy consumption for the standard cotton programme at partial load equal to 60 % of the energy consumption at full load, and an additional annual energy consumption in low power modes of 13,5 kWh.

Top

All

Choose the experimental features you want to try