This document is an excerpt from the EUR-Lex website
Document 52006XC1010(01)
Commission communication in the framework of the implementation of the Directive 2001/16/EC of the European Parliament and of the Council of 19 March 2001 on the interoperability of the trans-European conventional rail system (Text with EEA relevance)
Commission communication in the framework of the implementation of the Directive 2001/16/EC of the European Parliament and of the Council of 19 March 2001 on the interoperability of the trans-European conventional rail system (Text with EEA relevance)
Commission communication in the framework of the implementation of the Directive 2001/16/EC of the European Parliament and of the Council of 19 March 2001 on the interoperability of the trans-European conventional rail system (Text with EEA relevance)
OJ C 243, 10.10.2006, p. 2–2
(ES, CS, DA, DE, ET, EL, EN, FR, IT, LV, LT, HU, NL, PL, PT, SK, SL, FI, SV)
|
10.10.2006 |
EN |
Official Journal of the European Union |
C 243/2 |
Commission communication in the framework of the implementation of the Directive 2001/16/EC of the European Parliament and of the Council of 19 March 2001 on the interoperability of the trans-European conventional rail system
(2006/C 243/02)
(Text with EEA relevance)
(Publication of titles and references of harmonised standards under the directive)
|
ESO (1) |
Reference and title of the harmonised standard (and reference document) |
Reference of superseded standard |
Date of cessation of presumption of conformity of superseded standard Note 1 |
|
CEN |
EN 13715:2006 Railway applications — Wheelsets and bogies — Wheels — Wheels tread |
— |
|
|
CEN |
EN 14531-1:2005 Railway applications — Methods for calculation of stopping distances, slowing distances and immobilization braking — Part 1: General algorithms |
— |
|
|
CEN |
EN 14535-1:2005 Railway applications — Brake discs for railway rolling stock — Part 1: Brake discs pressed or shrunk onto the axle or drive shaft, dimensions and quality requirements |
— |
|
|
CEN |
EN 14601:2005 Railway applications — Straight and angled end cocks for brake pipe and main reservoir pipe |
— |
|
|
Note 1 |
Generally the date of cessation of presumption of conformity will be the date of withdrawal (‘dow’), set by the European Standardisation Organisation, but attention of users of these standards is drawn to the fact that in certain exceptional cases this can be otherwise. |
|
Note 3 |
In case of amendments, the referenced standard is EN CCCCC:YYYY, its previous amendments, if any, and the new, quoted amendment. The superseded standard (column 3) therefore consists of EN CCCCC:YYYY and its previous amendments, if any, but without the new quoted amendment. On the date stated, the superseded standard ceases to give presumption of conformity with the essential requirements of the directive. |
Note:
|
— |
Any information concerning the availability of the standards can be obtained either from the European Standardisation Organisations or from the national standardisation bodies of which the list is annexed to the Directive 98/34/EC (2) of the European Parliament and Council amended by the Directive 98/48/EC (3). |
|
— |
Publication of the references in the Official Journal of the European Union does not imply that the standards are available in all the Community languages. |
|
— |
This list replaces all the previous lists published in the Official Journal of the European Union. The Commission ensures the updating of this list. |
More information about harmonised standards on the Internet at
http://europa.eu.int/comm/enterprise/newapproach/standardization/harmstds/
(1) ESO: European Standardisation Organisation:
|
— |
CEN: rue de Stassart 36, B-1050 Brussels, Tel.(32-2) 550 08 11; fax (32-2) 550 08 19 (http://www.cenorm.be) |
|
— |
CENELEC: rue de Stassart 35, B-1050 Brussels, Tel.(32-2) 519 68 71; fax (32-2) 519 69 19 (http://www.cenelec.org) |
|
— |
ETSI: 650, route des Lucioles, F-06921 Sophia Antipolis, Tel.(33) 492 94 42 00; fax (33) 493 65 47 16 (http://www.etsi.org) |
(2) OJ L 204, 21.7.1998, p. 37.
(3) OJ L 217, 5.8.1998, p. 18.