This document is an excerpt from the EUR-Lex website
Document 02014R0833-20221007
Council Regulation (EU) No 833/2014 of 31 July 2014 concerning restrictive measures in view of Russia's actions destabilising the situation in Ukraine
Consolidated text: Council Regulation (EU) No 833/2014 of 31 July 2014 concerning restrictive measures in view of Russia's actions destabilising the situation in Ukraine
Council Regulation (EU) No 833/2014 of 31 July 2014 concerning restrictive measures in view of Russia's actions destabilising the situation in Ukraine
02014R0833 — EN — 07.10.2022 — 011.001
This text is meant purely as a documentation tool and has no legal effect. The Union's institutions do not assume any liability for its contents. The authentic versions of the relevant acts, including their preambles, are those published in the Official Journal of the European Union and available in EUR-Lex. Those official texts are directly accessible through the links embedded in this document
|
COUNCIL REGULATION (EU) No 833/2014 of 31 July 2014 concerning restrictive measures in view of Russia's actions destabilising the situation in Ukraine (OJ L 229 31.7.2014, p. 1) |
Amended by:
|
|
|
Official Journal |
||
|
No |
page |
date |
||
|
L 271 |
3 |
12.9.2014 |
||
|
L 349 |
20 |
5.12.2014 |
||
|
L 263 |
10 |
8.10.2015 |
||
|
L 316 |
15 |
1.12.2017 |
||
|
COMMISSION IMPLEMENTING REGULATION (EU) 2019/1163 of 5 July 2019 |
L 182 |
33 |
8.7.2019 |
|
|
L 42I |
74 |
23.2.2022 |
||
|
L 49 |
1 |
25.2.2022 |
||
|
L 57 |
1 |
28.2.2022 |
||
|
L 63 |
1 |
2.3.2022 |
||
|
L 65 |
1 |
2.3.2022 |
||
|
L 81 |
1 |
9.3.2022 |
||
|
L 87I |
13 |
15.3.2022 |
||
|
L 111 |
1 |
8.4.2022 |
||
|
COMMISSION IMPLEMENTING REGULATION (EU) 2022/595 of 11 April 2022 |
L 114 |
60 |
12.4.2022 |
|
|
L 153 |
53 |
3.6.2022 |
||
|
L 193 |
1 |
21.7.2022 |
||
|
L 259I |
3 |
6.10.2022 |
||
Corrected by:
COUNCIL REGULATION (EU) No 833/2014
of 31 July 2014
concerning restrictive measures in view of Russia's actions destabilising the situation in Ukraine
Article 1
For the purposes of this Regulation, the following definitions apply:
‘dual-use goods and technology’ means the items listed in Annex I to Regulation (EU) 2021/821 of the European Parliament and of the Council ( 1 );
‘competent authorities’ means the competent authorities of the Member States as identified on the websites listed in Annex I;
‘technical assistance’ means any technical support related to repairs, development, manufacture, assembly, testing, maintenance, or any other technical service, and may take forms such as instruction, advice, training, transmission of working knowledge or skills or consulting services, including verbal forms of assistance;
‘brokering services’ means:
the negotiation or arrangement of transactions for the purchase, sale or supply of goods and technology or of financial and technical services, including from a third country to any other third country, or
the selling or buying of goods and technology or of financial and technical services, including where they are located in third countries for their transfer to another third country;
‘investment services’ means the following services and activities:
reception and transmission of orders in relation to one or more financial instruments;
execution of orders on behalf of clients;
dealing on own account;
portfolio management;
investment advice;
underwriting of financial instruments and/or placing of financial instruments on a firm commitment basis;
placing of financial instruments without a firm commitment basis;
any service in relation to the admission to trading on a regulated market or trading on a multilateral trading facility;
‘transferable securities’ means the following classes of securities, including in the form of crypto-assets, which are negotiable on the capital market, with the exception of instruments of payment:
shares in companies and other securities equivalent to shares in companies, partnerships or other entities, and depositary receipts in respect of shares,
bonds or other forms of securitised debt, including depositary receipts in respect of such securities,
any other securities giving the right to acquire or sell any such transferable securities or giving rise to a cash settlement determined by reference to transferable securities;
‘money-market instruments’ means those classes of instruments which are normally dealt in on the money market, such as treasury bills, certificates of deposit and commercial papers and excluding instruments of payment;
‘credit institution’ means an undertaking, the business of which is to take deposits or other repayable funds from the public and to grant credit for its own account;
‘territory of the Union’ means the territories of the Member States to which the Treaty is applicable, under the conditions laid down in the Treaty, including their airspace;
‘central securities depository’ means a legal person as defined in point 1 of Article 2(1) of Regulation (EU) No 909/2014 of the European Parliament and of the Council ( 2 );
‘deposit’ means a credit balance which results from funds left in an account or from temporary situations deriving from normal banking transactions and which a credit institution is required to repay under the legal and contractual conditions applicable, including a fixed-term deposit and a savings deposit, but excluding a credit balance where:
its existence can only be proven by a financial instrument as defined in Article 4(1)(15) of Directive 2014/65/EU of the European Parliament and of the Council ( 3 ), unless it is a savings product which is evidenced by a certificate of deposit made out to a named person and which exists in a Member State on 2 July 2014;
its principal is not repayable at par;
its principal is only repayable at par under a particular guarantee or agreement provided by the credit institution or a third party;
‘investor citizenship schemes’ (or ‘golden passports’) means the procedures put in place by a Member State, which allow third-country nationals to acquire its nationality in exchange for pre-determined payments and investments;
‘investor residence schemes’ (or ‘golden visas’) means the procedures put in place by a Member State, which allow third-country nationals to obtain a residence permit in a Member State in exchange for pre-determined payments and investments;
‘trading venue’, as defined in Article 4(1)(24) of Directive 2014/65/EU, means a regulated market, a multilateral trading facility (MTF) or an organised trading facility (OTF);
‘financing or financial assistance’ means any action, irrespective of the particular means chosen, whereby the person, entity or body concerned, conditionally or unconditionally, disburses or commits to disburse its own funds or economic resources, including but not limited to grants, loans, guarantees, suretyships, bonds, letters of credit, supplier credits, buyer credits, import or export advances and all types of insurance and reinsurance, including export credit insurance; payment as well as terms and conditions of payment of the agreed price for a good or a service, made in line with normal business practice, do not constitute financing or financial assistance;
‘partner country’ means a country applying a set of export control measures substantially equivalent to those set out in this Regulation, as identified in Annex VIII;
‘consumer communication devices’ means devices used by private individuals such as personal computers and peripherals (including hard drives and printers), mobile telephones, smart televisions, memory devices (USB drives), and consumer software for all of these items;
‘Russian air carrier’ means an air transport undertaking holding a valid operating licence or equivalent issued by the competent authorities of the Russian Federation;
‘credit rating’ means an opinion regarding the creditworthiness of an entity, a debt or financial obligation, debt security, preferred share or other financial instrument, or of an issuer of such a debt or financial obligation, debt security, preferred share or other financial instrument, issued using an established and defined ranking system of rating categories;
‘credit rating activities’ means data and information analysis and the evaluation, approval, issuing and review of credit ratings;
‘energy sector’ means a sector covering the following activities with the exception of civil nuclear related activities:
the exploration, production, distribution within Russia or mining of crude oil, natural gas or solid fossil fuels, the refining of fuels, the liquefaction of natural gas or regasification;
the manufacture or distribution within Russia of solid fossil fuel products, refined petroleum products or gas; or
the construction of facilities or installation of equipment for, or the provision of services, equipment or technology for, activities related to power generation or electricity production;
‘road transport undertaking’ means any natural or legal person, entity or body engaged with a commercial purpose in the transport of freight by means of motor vehicles or combinations of vehicles.
Article 2
It shall be prohibited to:
provide technical assistance, brokering services or other services related to the goods and technology referred to in paragraph 1 and to the provision, manufacture, maintenance and use of those goods and technology, directly or indirectly to any natural or legal person, entity or body in Russia or for use in Russia;
provide financing or financial assistance related to the goods and technology referred to in paragraph 1 for any sale, supply, transfer or export of those goods and technology, or for the provision of related technical assistance, brokering services or other services, directly or indirectly to any natural or legal person, entity or body in Russia, or for use in Russia.
Without prejudice to the authorisation requirements pursuant to Regulation (EU) 2021/821, the prohibitions in paragraphs 1 and 2 of this Article shall not apply to the sale, supply, transfer or export of dual-use goods and technology or to the related provision of technical and financial assistance, for non-military use and for a non-military end user, intended for:
humanitarian purposes, health emergencies, the urgent prevention or mitigation of an event likely to have a serious and significant impact on human health and safety or the environment or as a response to natural disasters;
medical or pharmaceutical purposes;
temporary export of items for use by news media;
software updates;
use as consumer communication devices; or
▼M16 —————
personal use of natural persons travelling to Russia or members of their immediate families travelling with them, and limited to personal effects, household effects, vehicles or tools of trade owned by those individuals and not intended for sale.
With the exception of point (g) of the first subparagraph, the exporter shall declare in the customs declaration that the items are being exported under the relevant exception set out in this paragraph and shall notify the competent authority of the Member State where the exporter is resident or established of the first use of the relevant exception within 30 days from the date when the first export took place.
By way of derogation from paragraphs 1 and 2 of this Article, and without prejudice to the authorisation requirements pursuant to Regulation (EU) 2021/821, the competent authorities may authorise the sale, supply, transfer or export of dual-use goods and technology or the provision of related technical or financial assistance, for non-military use and for a non-military end user, after having determined that such goods or technology or the related technical or financial assistance are:
intended for cooperation between the Union, the governments of Member States and the government of Russia in purely civilian matters;
intended for intergovernmental cooperation in space programmes;
intended for the operation, maintenance, fuel retreatment and safety of civil nuclear capabilities, as well as civil nuclear cooperation, in particular in the field of research and development;
intended for maritime safety;
intended for civilian non-publicly available electronic communications networks which are not the property of an entity that is publicly controlled or with over 50 % public ownership;
intended for the exclusive use of entities owned, or solely or jointly controlled by a legal person, entity or body which is incorporated or constituted under the law of a Member State or of a partner country;
intended for the diplomatic representations of the Union, Member States and partner countries, including delegations, embassies and missions;
intended for ensuring cyber-security and information security for natural and legal persons, entities and bodies in Russia except for its government and undertakings directly or indirectly controlled by that government.
When deciding on requests for authorisations referred to in paragraphs 4 and 5, the competent authorities shall not grant an authorisation if they have reasonable grounds to believe that:
the end-user might be a military end-user, a natural or legal person, entity or body in Annex IV or that the goods might have a military end-use, unless the sale, supply, transfer or export of goods and technology referred to in paragraph 1 or the provision of related technical or financial assistance is allowed under paragraph 1(a) of Article 2b;
the sale, supply, transfer or export of goods and technology referred to in paragraph 1 or the provision of related technical or financial assistance is intended for aviation or the space industry, unless such sale, supply, transfer or export or the provision of related technical or financial assistance is allowed under paragraph 4(b); or
the sale, supply, transfer or export of goods and technology referred to in paragraph 1 or the provision of related technical or financial assistance is intended for the energy sector, unless such a sale, supply, transfer or export or the related technical or financial assistance is allowed under the exceptions referred to in paragraphs 3 to 6 of Article 3.
Article 2a
It shall be prohibited to:
provide technical assistance, brokering services or other services related to the goods and technology referred to in paragraph 1 and to the provision, manufacture, maintenance and use of these goods and technology, directly or indirectly to any natural or legal person, entity or body in Russia, or for use in Russia;
provide financing or financial assistance related to the goods and technology referred to in paragraph 1 for any sale, supply, transfer or export of those goods and technology, or for the provision of related technical assistance, brokering services or other services, directly or indirectly to any natural or legal person, entity or body in Russia, or for use in Russia.
The prohibitions in paragraphs 1 and 2 shall not apply to the sale, supply, transfer or export of the goods and technology referred to in paragraph 1 or to the related provision of technical and financial assistance, for non-military use and for a non-military end-user, intended for:
humanitarian purposes, health emergencies, the urgent prevention or mitigation of an event likely to have a serious and significant impact on human health and safety or the environment, or as a response to natural disasters;
medical or pharmaceutical purposes;
temporary export of items for use by news media;
software updates;
use as consumer communication devices; or
▼M16 —————
personal use of natural persons travelling to Russia or members of their immediate families travelling with them, and limited to personal effects, household effects, vehicles or tools of trade owned by those individuals and not intended for sale.
With the exception of point (g) of the first subparagraph, the exporter shall declare in the customs declaration that the items are being exported under the relevant exception set out in this paragraph and shall notify the competent authority of the Member State where the exporter is resident or established of the first use of the relevant exception within 30 days from the date when the first export took place.
By way of derogation from paragraphs 1 and 2, the competent authorities may authorise the sale, supply, transfer or export of the goods and technology referred to in paragraph 1 or the provision of related technical or financial assistance, for non-military use and for a non-military end-user, after having determined that such goods or technology or the related technical or financial assistance are:
intended for cooperation between the Union, the governments of Member States and the government of Russia in purely civilian matters;
intended for intergovernmental cooperation in space programmes;
intended for the operation, maintenance, fuel retreatment and safety of civil nuclear capabilities, as well as civil nuclear cooperation, in particular in the field of research and development;
intended for maritime safety;
intended for civilian non-publicly available electronic communications networks which are not the property of an entity that is publicly controlled or with over 50 % public ownership;
intended for the exclusive use of entities owned, or solely or jointly controlled by a legal person, entity or body which is incorporated or constituted under the law of a Member State or of a partner country; or
intended for the diplomatic representations of the Union, Member States and partner countries, including delegations, embassies and missions; or
intended for ensuring cyber-security and information security for natural and legal persons, entities and bodies in Russia except for its government and undertakings directly or indirectly controlled by that government.
When deciding on requests for authorisations referred to in paragraphs 4 and 5, the competent authorities shall not grant an authorisation if they have reasonable grounds to believe that:
the end-user might be a military end-user, a natural or legal person, entity or body in Annex IV or that the goods might have a military end-use, unless the sale, supply, transfer or export of goods and technology referred to in paragraph 1 or the provision of related technical or financial assistance is allowed under paragraph 1 of Article 2b;
the sale, supply, transfer or export of goods and technology referred to in paragraph 1 or the provision of related technical or financial assistance is intended for aviation or the space industry, unless such sale, supply, transfer or export or the provision of related technical or financial assistance is allowed under paragraph 4(b); or
the sale, supply, transfer or export of goods and technology referred to in paragraph 1 or the provision of related technical or financial assistance is intended for the energy sector, unless such a sale, supply, transfer or export or the related technical or financial assistance is allowed under the exceptions referred to in paragraphs 3 to 6 of Article 3.
Article 2aa
It shall be prohibited to:
provide technical assistance, brokering services or other services related to the goods referred to in paragraph 1 and to the provision, manufacture, maintenance and use of those goods, directly or indirectly to any natural or legal person, entity or body in Russia or for use in Russia;
provide financing or financial assistance related to the goods referred to in paragraph 1 for any sale, supply, transfer or export of those goods, or for the provision of related technical assistance, brokering services or other services, directly or indirectly to any natural or legal person, entity or body in Russia, or for use in Russia.
Article 2b
With regard to the natural or legal persons, entities or bodies listed in Annex IV, by way of derogation from Article 2(1) and (2) and Article 2a(1) and (2), and without prejudice to the authorisation requirements pursuant to Regulation (EU) 2021/821, the competent authorities may only authorise the sale, supply, transfer or export of dual use goods and technology, and goods and technology listed in Annex VII, or the provision of related technical or financial assistance after having determined that:
such goods or technology or the related technical or financial assistance are necessary for the urgent prevention or mitigation of an event likely to have a serious and significant impact on human health and safety or the environment; or
such goods or technology or the related technical or financial assistance are due under contracts concluded before 26 February 2022, or ancillary contracts necessary for the execution of such a contract, provided that the authorisation is requested before 1 May 2022.
Article 2c
Article 2d
Member States and the Commission shall ensure the protection of confidential information acquired in application of this Article in accordance with Union law and the respective national law.
Member States and the Commission shall ensure that classified information provided or exchanged under this Article is not downgraded or declassified without the prior written consent of the originator.
Article 2e
The prohibition in paragraph 1 shall not apply to:
binding financing or financial assistance commitments established prior to 26 February 2022;
the provision of public financing or financial assistance up to the total value of 10 000 000 EUR per project benefiting small and medium-sized enterprises established in the Union; or
the provision of public financing or financial assistance for trade in food, and for agricultural, medical or humanitarian purposes.
Article 2f
Article 3
It shall be prohibited to:
provide technical assistance, brokering services or other services related to the goods and technology referred to in paragraph 1 and to the provision, manufacture, maintenance and use of those goods and technology, directly or indirectly to any natural or legal person, entity or body in Russia, or for use in Russia;
provide financing or financial assistance related to the goods and technology referred to in paragraph 1 for any sale, supply, transfer or export of those goods and technology, or for the provision of related technical assistance, brokering services or other services, directly or indirectly to any natural or legal person, entity or body in Russia, or for use in Russia.
The prohibitions in paragraphs 1 and 2 shall not apply to the sale, supply, transfer or export of goods or technology, or to the provision of technical or financial assistance, necessary for:
the transport of natural gas and oil, including refined petroleum products, unless prohibited under Article 3m or 3n, from or through Russia into the Union; or
the urgent prevention or mitigation of an event likely to have a serious and significant impact on human health and safety or the environment.
By way of derogation from paragraphs 1 and 2, the competent authorities may authorise, under such conditions as they deem appropriate, the sale, supply, transfer or export and the provision of technical or financial assistance, after having determined that:
it is necessary for ensuring critical energy supply within the Union; or
it is intended for the exclusive use of entities owned, or solely or jointly controlled by a legal person, entity or body which is incorporated or constituted under the law of a Member State.
Article 3a
It shall be prohibited to:
acquire any new or extend any existing participation in any legal person, entity or body incorporated or constituted under the law of Russia or any other third country and operating in the energy sector in Russia;
grant or be part of any arrangement to grant any new loan or credit or otherwise provide financing, including equity capital, to any legal person, entity or body incorporated or constituted under the law of Russia or any other third country and operating in the energy sector in Russia, or for the documented purpose of financing such a legal person, entity or body;
create any new joint venture with any legal person, entity or body incorporated or constituted under the law of Russia or any other third country and operating in the energy sector in Russia;
provide investment services directly related to the activities referred to in points (a), (b) and (c).
By way of derogation from paragraph 1, the competent authorities may authorise, under such conditions as they deem appropriate, any activity referred to in paragraph 1 after having determined that:
it is necessary for ensuring critical energy supply within the Union, as well as the transport of natural gas and oil, including refined petroleum products, unless prohibited under Article 3m or 3n, from or through Russia into the Union; or
it exclusively concerns a legal person, entity or body operating in the energy sector in Russia owned by a legal person, entity or body which is incorporated or constituted under the law of a Member State.
Article 3b
It shall be prohibited to:
provide technical assistance, brokering services or other services related to the goods and technology referred to in paragraph 1 and to the provision, manufacture, maintenance and use of those goods and technology, directly or indirectly to any natural or legal person, entity or body in Russia or for use in Russia.
provide financing or financial assistance related to the goods and technology referred to in paragraph 1 for any sale, supply, transfer or export of those goods and technology, or for the provision of related technical assistance, brokering services or other services, directly or indirectly to any person, entity or body in Russia or for use in Russia.
In duly justified cases of emergency, the sale, supply, transfer or export may proceed without prior authorisation, provided that the exporter notifies the competent authority within five working days after the sale, supply, transfer or export has taken place, providing detail about the relevant justification for the sale, supply, transfer or export without prior authorisation.
Article 3c
It shall be prohibited to:
provide technical assistance, brokering services or other services related to the goods and technology referred to in paragraph 1 and to the provision, manufacture, maintenance and use of those goods and technology, directly or indirectly to any natural or legal person, entity or body in Russia or for use in Russia.
provide financing or financial assistance related to the goods and technology referred to in paragraph 1 for any sale, supply, transfer or export of those goods and technology, or for the provision of related technical assistance, brokering services or other services, directly or indirectly to any natural or legal person, entity or body in Russia or for use in Russia.
By way of derogation from paragraphs 1 and 4, the national competent authorities may authorise, under such conditions as they deem appropriate, the execution of an aircraft financial lease concluded before 26 February 2022 after having determined that:
it is strictly necessary to ensure lease re-payments to a legal person, entity or body incorporated or constituted under the law of a Member State which does not fall under any of the restrictive measures provided for in this Regulation; and
no economic resources will be made available to the Russian counterpart, with the exception of the transfer of ownership of the aircraft after full reimbursement of the financial lease.
Article 3d
Article 3e
Article 3ea
For the purposes of this Article, with the exception of paragraph 1a, a ‘vessel’ means:
a ship falling within the scope of the relevant international conventions;
a yacht, of 15 metres in length or more, which does not carry cargo and carrying no more than 12 passengers; or
recreational craft or personal watercraft as defined in Directive 2013/53/EU of the European Parliament and of the Council ( 9 ).
By way of derogation from paragraphs 1 and 1a, the competent authorities may authorise a vessel to access a port or lock, under such conditions as they deem appropriate, after having determined that the access is necessary for:
unless prohibited under Article 3m or 3n, the purchase, import or transport into the Union of natural gas and oil, including refined petroleum products, titanium, aluminium, copper, nickel, palladium and iron ore, as well as certain chemical and iron products as listed in Annex XXIV;
the purchase, import or transport of pharmaceutical, medical, agricultural and food products, including wheat and fertilisers whose import, purchase and transport is allowed under this Regulation;
humanitarian purposes;
transport of nuclear fuel and other goods strictly necessary for the functioning of civil nuclear capabilities; or
the purchase, import or transport into the Union of coal and other solid fossil fuels, as listed in Annex XXII until 10 August 2022.
By way of derogation from paragraph 2, the competent authorities may authorise vessels that have changed their Russian flag or their registration, to the flag or register of any other State prior to 16 April 2022, to access a port or a lock, under such conditions as they deem appropriate, after having determined that:
a Russian flag or registration was required by contract; and
the access is necessary for the unloading of goods strictly necessary for the completion of renewable energy projects in the Union, provided that the import of such goods is not otherwise prohibited under this Regulation.
By way of derogation from paragraph 2, the competent authorities may authorise, under such conditions as they deem appropriate, a vessel to access a port or lock provided that it:
has flown the Russian Federation flag under a bareboat charter registration initially effected prior to 24 February 2022;
has resumed its right to fly the flag of the underlying Member State registry before 31 January 2023; and
is not owned, chartered, operated or otherwise controlled by a Russian national or any legal person, entity or body incorporated or constituted under the law of the Russian Federation.
Article 3f
It shall be prohibited to:
provide technical assistance, brokering services or other services related to the goods and technology referred to in paragraph 1 and to the provision, manufacture, maintenance and use of those goods and technology, directly or indirectly to any natural or legal person, entity or body in Russia or for use in Russia.
provide financing or financial assistance related to the goods and technology referred to in paragraph 1 for any sale, supply, transfer or export of those goods and technology, or for the provision of related technical assistance, brokering services or other services, directly or indirectly to any natural or legal person, entity or body in Russia or for use in Russia.
Article 3g
It shall be prohibited:
to import, directly or indirectly, iron and steel products as listed in Annex XVII into the Union if they:
originate in Russia; or
have been exported from Russia;
to purchase, directly or indirectly, iron and steel products as listed in Annex XVII which are located or which originated in Russia;
to transport iron and steel products as listed in Annex XVII if they originated in Russia or are being exported from Russia to any other country;
to import or purchase, as from 30 September 2023, directly or indirectly, iron and steel products as listed in Annex XVII when processed in a third country incorporating iron and steel products originating in Russia as listed in Annex XVII; with regard to products listed in Annex XVII processed in a third country incorporating steel products originating in Russia of CN code 7207 11 or 7207 12 10 , this prohibition shall apply as of 1 April 2024 for CN code 7207 11 and as of 1 October 2024 for CN code 7207 12 10 ;
to provide, directly or indirectly, technical assistance, brokering services, financing or financial assistance, including financial derivatives, as well as insurance and re-insurance, related to the prohibitions in points (a), (b), (c) and (d).
The prohibitions in points (a), (b), (c) and (e) of paragraph 1 shall not apply to the import, purchase or transport, or related technical or financial assistance, of the following quantities of goods falling under CN code 7207 12 10 :
3 747 905 metric tonnes between 7 October 2022 and 30 September 2023;
3 747 905 metric tonnes between 1 October 2023 and 30 September 2024.
The prohibitions in paragraph 1 shall not apply to the import, purchase or transport, or related technical or financial assistance, of the following quantities of goods falling under CN code 7207 11 :
487 202 metric tonnes between 7 October 2022 and 30 September 2023;
85 260 metric tonnes between 1 October 2023 and 31 December 2023;
48 720 metric tonnes between 1 January 2024 and 31 March 2024.
Article 3h
Article 3i
It shall be prohibited to:
provide technical assistance, brokering services or other services related to the goods and technology referred to in paragraph 1 and to the provision, manufacture, maintenance and use of those goods and technology, directly or indirectly in relation to the prohibition in paragraph 1;
provide financing or financial assistance related to the goods and technology referred to in paragraph 1 for any purchase, import or transfer of those goods and technology, or for the provision of related technical assistance, brokering services or other services, directly or indirectly in relation to the prohibition in paragraph 1.
As of 10 July 2022, the prohibitions in paragraphs 1 and 2 shall not apply to the import, purchase or transport, or the related technical or financial assistance, necessary for the import into the Union, of:
837 570 metric tonnes of potassium chloride of CN 3104 20 between 10 July of a given year and 9 July of the following year;
1 577 807 metric tonnes combined of the other products listed in Annex XXI under CN 3105 20 , 3105 60 and 3105 90 between 10 July of a given year and 9 July of the following year.
Article 3j
It shall be prohibited to:
provide technical assistance, brokering services or other services related to the goods and technology referred to in paragraph 1 and to the provision, manufacture, maintenance and use of those goods and technology, directly or indirectly in relation to the prohibition in paragraph 1.
provide financing or financial assistance related to the goods and technology referred to in paragraph 1 for any purchase, import or transfer of those goods and technology, or for the provision of related technical assistance, brokering services or other services, directly or indirectly in relation to the prohibition in paragraph 1.
Article 3k
It shall be prohibited to:
provide technical assistance, brokering services or other services related to the goods and technology referred to in paragraph 1 and to the provision, manufacture, maintenance and use of those goods and technology, directly or indirectly to any natural or legal person, entity or body in Russia or for use in Russia;
provide financing or financial assistance related to the goods and technology referred to in paragraph 1 for any sale, supply, transfer or export of those goods and technology, or for the provision of related technical assistance, brokering services or other services, directly or indirectly to any natural or legal person, entity or body in Russia, or for use in Russia.
The competent authorities of the Member States may authorise, under the conditions they deem appropriate, the sale, supply, transfer or export of the goods and technology listed in Annex XXIII, or the provision of related technical or financial assistance, after having determined that such goods or technology or the provision of related technical or financial assistance are necessary for:
medical or pharmaceutical purposes, or for humanitarian purposes, such as delivering or facilitating the delivery of assistance, including medical supplies, food, or the transfer of humanitarian workers and related assistance or for evacuations; or
the exclusive use and under the full control of the authorising Member State and in order to fulfil its maintenance obligations in areas which are under a long-term lease agreement between that Member State and the Russian Federation; or
the establishment, operation, maintenance, fuel supply and retreatment and safety of civil nuclear capabilities, and the continuation of design, construction and commissioning required for the completion of civil nuclear facilities, the supply of precursor material for the production of medical radioisotopes and similar medical applications, or critical technology for environmental radiation monitoring, as well as for civil nuclear cooperation, in particular in the field of research and development.
Article 3l
The prohibition in paragraph 1 shall not apply to road transport undertakings transporting:
mail as a universal service;
goods in transit though the Union between the Kaliningrad Oblast and Russia, provided that the transport of such goods is not otherwise prohibited under this Regulation.
The prohibition in paragraph 1 shall not apply until 16 April 2022 to the transport of goods that started before 9 April 2022, provided that the vehicle of the road transport undertaking:
was already in the territory of the Union on 9 April 2022, or
needs to transit through the Union in order to return to Russia.
By way of derogation from paragraph 1, the competent authorities of a Member State may authorise the transport of goods by a road transport undertaking established in Russia if the competent authorities have determined that such transport is necessary for:
unless prohibited under Article 3m or 3n, the purchase, import or transport into the Union of natural gas and oil, including refined petroleum products, as well as titanium, aluminium, copper, nickel, palladium and iron ore;
the purchase, import or transport of pharmaceutical, medical, agricultural and food products, including wheat and fertilisers whose import, purchase and transport is allowed under this Regulation;
humanitarian purposes;
the functioning of diplomatic and consular representations in Russia, including delegations, embassies and missions, or international organisations in Russia enjoying immunities in accordance with international law; or
the transfer or export to Russia of cultural goods which are on loan in the context of formal cultural cooperation with Russia.
Article 3m
The prohibitions in paragraphs 1 and 2 shall not apply:
until 5 December 2022, to one-off transactions for near-term delivery, concluded and executed before that date, or to the execution of contracts for the purchase, import or transfer of goods falling under CN 2709 00 concluded before 4 June 2022, or of ancillary contracts necessary for the execution of such contracts, provided that those contracts have been notified by the relevant Member States to the Commission by 24 June 2022 and that the one-off transactions for near-term delivery are notified by the relevant Member States to the Commission within 10 days of their completion;
until 5 February 2023, to one-off transactions for near-term delivery, concluded and executed before this date, or to the execution of contracts for the purchase, import or transfer of goods falling under CN 2710 concluded before 4 June 2022, or of ancillary contracts necessary for the execution of such contracts, provided that those contracts have been notified by the relevant Member States to the Commission by 24 June 2022 and that the one-off transactions for near-term delivery are notified by the relevant Member States to the Commission within 10 days of their completion;
to the purchase, import or transfer of seaborne crude oil and of petroleum products listed in Annex XXV where those goods originate in a third country and are only being loaded in, departing from or transiting through Russia, provided that both the origin and the owner of those goods are non-Russian;
to crude oil falling under CN 2709 00 which is delivered by pipeline from Russia into Member States, until the Council decides that the prohibitions in paragraphs 1 and 2 shall apply.
As of 5 February 2023, and by way of derogation from paragraphs 1 and 2, the competent authorities of Croatia may authorise until 31 December 2023 the purchase, import or transfer of vacuum gas oil falling under CN 2710 19 71 originating in Russia or exported from Russia, provided that the following conditions are fulfilled:
no alternative supply of vacuum gas oil is available; and
Croatia has notified the Commission, at least two weeks prior to the authorisation, of the grounds on which it considers that a specific authorisation should be granted, and the Commission has not objected within that period.
All consignments and containers of such crude oil shall be clearly marked as 'REBCO: export prohibited'.
As from 5 February 2023, where crude oil has been delivered by pipeline into a Member State as referred to in paragraph 3(d), it shall be prohibited to transfer or transport petroleum products falling under CN 2710 which are obtained from such crude oil to other Member States or to third countries, or to sell such petroleum products to purchasers in other Member States or in third countries.
By way of temporary derogation, the prohibitions referred to in the third subparagraph shall apply as from 5 December 2023 to the import and transfer into Czechia, and to the sale to purchasers in Czechia, of petroleum products obtained from crude oil which has been delivered by pipeline into another Member State as referred to in paragraph 3(d). If alternative supplies for such petroleum products are made available to Czechia before that date, the Council shall terminate that temporary derogation. During the period until 5 December 2023, the volumes of such petroleum products imported into Czechia from other Member States shall not exceed the average volumes imported into Czechia from those other Member States over the same period during the previous five years.
During the period until 5 December 2023 referred to in the fourth subparagraph of paragraph 8, Member States shall report to the Commission every three months on the amounts which they export to Czechia of petroleum products falling under CN 2710 obtained from crude oil which has been delivered by pipeline as referred to in paragraph 3(d).
Article 3n
The prohibition in paragraph 1 shall not apply to the execution of contracts concluded before 4 June 2022, or of ancillary contracts necessary for the execution of such contracts until:
5 December 2022, for crude oil falling under CN code 2709 00 ;
5 February 2023, for petroleum products falling under CN code 2710 .
The prohibition in paragraph 4 shall apply as from the date of entry into force of the first Council Decision amending Annex XI to Decision 2014/512/CFSP in accordance with Article 4p(9)(a) of that Decision.
As from the date of entry into force of every subsequent Council Decision amending Annex XI to Decision 2014/512/CFSP, the prohibition in paragraph 4 shall not apply, for a period of 90 days, to the transport of products listed in Annex XXV to this Regulation which originate in Russia or which have been exported from Russia, provided that:
the transport is based on a contract concluded before that date of entry into force; and
the purchase price per barrel did not exceed the price laid down in Annex XXVIII to this Regulation on the date of conclusion of that contract.
The prohibitions in paragraphs 1 and 4 shall not apply:
as of 5 December 2022, to crude oil falling under CN code 2709 00 , and as of 5 February 2023, to petroleum products falling under CN code 2710 , which originate in Russia or which have been exported from Russia, provided that the purchase price per barrel of such products does not exceed the price laid down in Annex XXVIII;
to crude oil or petroleum products as listed in Annex XXV where those goods originate in a third country and are only being loaded in, departing from or transiting through Russia, provided that both the origin and the owner of those goods are non-Russian;
to the transport, or to technical assistance, brokering services, financing or financial assistance related to such transport, of the products mentioned in Annex XXIX to the third countries mentioned therein, for the duration specified in that Annex.
Article 3o
It shall be prohibited to:
provide technical assistance, brokering services or other services related to the goods referred to in paragraphs 1, 2 and 3 and to the provision, manufacture, maintenance and use of those goods, directly or indirectly in relation to the prohibition in paragraphs 1, 2 and 3;
provide financing or financial assistance related to the goods referred to in paragraphs 1, 2 and 3 for any purchase, import or transfer of those goods, or for the provision of related technical assistance, brokering services or other services, directly or indirectly in relation to the prohibition in paragraphs 1, 2 and 3.
Article 4
It shall be prohibited:
to provide, directly or indirectly, technical assistance related to the goods and technology listed in the Common Military List ( 12 ), or related to the provision, manufacture, maintenance and use of goods included in that list, to any natural or legal person, entity or body in Russia or for use in Russia;
to provide, directly or indirectly, financing or financial assistance related to the goods and technology listed in the Common Military List, including in particular grants, loans and export credit insurance or guarantee, as well as insurance and reinsurance for any sale, supply, transfer or export of such items, or for any provision of related technical assistance, to any natural or legal person, entity or body in Russia or for use in Russia.
▼M13 —————
The prohibitions in paragraph 1 shall be without prejudice to the assistance for:
the import, purchase or transport related to: (i) the provision of spare parts and services necessary for the maintenance and safety of existing capabilities within the Union; or (ii) the execution of contracts concluded before 1 August 2014, or ancillary contracts necessary for the execution of such contracts; or
the sale, supply, transfer or export of spare parts and services necessary for the maintenance, repair and safety of existing capabilities within the Union.
The prohibitions in points (a) and (b) of paragraph 1 shall not apply to the provision, directly or indirectly, of technical assistance, financing or financial assistance, related to the following operations:
the sale, supply, transfer or export and to the import, purchase or transport of Hydrazine (CAS 302-01-2) in concentrations of 70 per cent or more, provided that that technical assistance, financing or financial assistance refers to an amount of Hydrazine calculated in accordance with the launch or launches or the satellites for which it is made, and which does not exceed a total quantity of 800 kg for each individual launch or satellite;
the import, purchase or transport of Unsymmetrical dimethyl hydrazine (CAS 57-14-7);
the sale, supply, transfer or export and to the import, purchase or transport of monomethyl hydrazine (CAS60-34-4), provided that that technical assistance, financing or financial assistance refers to an amount of Monomethyl Hydrazine calculated in accordance with the launch or launches or the satellites for which it is made,
insofar as the substances mentioned in points (a), (b) and (c) of this paragraph are destined for the use of launchers operated by European launch service providers, for the use of launches of European space programmes, or for the fuelling of satellites by European satellites manufacturers.
The prohibitions in points (a) and (b) of paragraph 1 shall not apply to the provision, directly or indirectly, of technical assistance, financing or financial assistance related to the sale, supply, transfer or export and the import, purchase or transport of hydrazine (CAS 302-01-2) in concentrations of 70 % or more, provided that that technical assistance, financing or financial assistance refers to hydrazine destined for:
the tests and flight of the ExoMars descent module in the framework of the ExoMars 2020 mission, in an amount calculated in accordance with the needs of each phase of that mission, which does not exceed a total of 5 000 kg for the entire duration of the mission; or
the flight of the ExoMars carrier module in the framework of the ExoMars 2020 mission, in an amount calculated in accordance with the needs of the flight, which does not exceed a total of 300 kg.
Applicants for authorisation shall supply the competent authorities with all relevant information required.
The competent authorities shall inform the Commission of all the authorisations granted.
The provision of the following shall be subject to an authorisation from the competent authority concerned:
technical assistance or brokering services related to items listed in Annex II and to the provision, manufacture, maintenance and use of those items, directly or indirectly, to any natural or legal person, entity or body in Russia, including its Exclusive Economic Zone and Continental Shelf or, if such assistance concerns items for use in Russia, including its Exclusive Economic Zone and Continental Shelf, to any person, entity or body in any other State;
financing or financial assistance related to items referred to in Annex II, including in particular grants, loans and export credit insurance, for any sale, supply, transfer or export of those items, or for any provision of related technical assistance, directly or indirectly, to any natural or legal person, entity or body in Russia, including its Exclusive Economic Zone and Continental Shelf or, if such assistance concerns items for use in Russia, including its Exclusive Economic Zone and Continental Shelf, to any person, entity or body in any other State.
In duly justified cases of emergency referred to in Article 3(5), the provision of services referred to in this paragraph may proceed without prior authorisation, on condition that the provider notifies the competent authority within five working days after the provision of services.
Article 5
It shall be prohibited to directly or indirectly purchase, sell, provide investment services for or assistance in the issuance of, or otherwise deal with transferable securities and money-market instruments with a maturity exceeding 90 days, issued after 1 August 2014 to 12 September 2014, or with a maturity exceeding 30 days, issued after 12 September 2014 to 12 April 2022 or any transferable securities and money market instruments issued after 12 April 2022 by:
a major credit institution, or other major institution having an explicit mandate to promote competitiveness of the Russian economy, its diversification and encouragement of investment, established in Russia with over 50 % public ownership or control as of 1 August 2014, as listed in Annex III; or
a legal person, entity or body established outside the Union whose proprietary rights are directly or indirectly owned for more than 50 % by an entity listed in Annex III; or
a legal person, entity or body acting on behalf or at the direction of an entity referred to in point (b) of this paragraph or listed in Annex III.
It shall be prohibited to directly or indirectly, purchase, sell, provide investment services for or assistance in the issuance of, or otherwise deal with transferable securities and money-market instruments issued after 12 April 2022 by:
any major credit institution, or other institution with over 50 % public ownership or control as of 26 February 2022 or any other credit institution having a significant role in supporting the activities of Russia, its government or the Central Bank and established in Russia, as listed in Annex XII; or
a legal person, entity or body established outside the Union whose proprietary rights are directly or indirectly owned for more than 50 % by an entity listed in Annex XII; or
a legal person, entity or body acting on behalf or at the direction of an entity referred to in point (a) or (b) of this paragraph.
It shall be prohibited to directly or indirectly purchase, sell, provide investment services for or assistance in the issuance of, or otherwise deal with transferable securities and money-market instruments with a maturity exceeding 30 days, issued after 12 September 2014 to 12 April 2022 or any transferable securities and money market instruments issued after 12 April 2022 by:
a legal person, entity or body established in Russia predominantly engaged, and with major activities, in the conception, production, sales or export of military equipment or services, as listed in Annex V, except legal persons, entities or bodies active in the space or the nuclear energy sectors;
a legal person, entity or body established in Russia, which is publicly controlled or with over 50 % public ownership and having estimated total assets of over RUB 1 trillion and whose estimated revenues originate for at least 50 % from the sale or transportation of crude oil or petroleum products, as listed in Annex VI;
a legal person, entity or body established outside the Union whose proprietary rights are directly or indirectly owned for more than 50 % by an entity listed in point (a) or (b) of this paragraph; or
a legal person, entity or body acting on behalf or at the direction of an entity referred to in point (a), (b) or (c) of this paragraph.
It shall be prohibited to directly or indirectly purchase, sell, provide investment services for or assistance in the issuance of, or otherwise deal with transferable securities and money-market instruments, issued after 12 April 2022 by:
a legal person, entity or body established in Russia, which is publicly controlled or with over 50 % public ownership and in which Russia, its Government or Central Bank has the right to participate in profits or with which Russia, its Government or Central Bank has other substantial economic relationships, as listed in Annex XIII; or
a legal person, entity or body established outside the Union whose proprietary rights are directly or indirectly owned for more than 50 % by an entity listed Annex XIII; or
a legal person, entity or body acting on behalf or at the direction of an entity referred to in point (a) or (b) of this paragraph.
It shall be prohibited to directly or indirectly make or be part of any arrangement to make
new loans or credit with a maturity exceeding 30 days to any legal person, entity or body referred to in paragraph 1 or 3, after 12 September 2014 to 26 February 2022; or
any new loans or credit to any legal person, entity or body referred to in paragraph 1, 2, 3 or 4 after 26 February 2022.
The prohibition shall not apply to:
loans or credit that have a specific and documented objective to provide financing for non-prohibited imports or exports of goods and non-financial services between the Union and any third State, including the expenditure for goods and services from another third State that is necessary for executing the export or import contracts; or
loans that have a specific and documented objective to provide emergency funding to meet solvency and liquidity criteria for legal persons established in the Union, whose proprietary rights are owned for more than 50 % by any entity referred to in Annex III.
The prohibition in paragraph 6 shall not apply to drawdown or disbursements made under a contract concluded before 26 February 2022 provided that the following conditions are met:
all the terms and conditions of such drawdown or disbursements:
were agreed before 26 February 2022; and
have not been modified on or after that date; and
before 26 February 2022 a contractual maturity date has been fixed for the repayment in full of all funds made available and for the cancellation of all the commitments, rights and obligations under the contract; and
at the time of its conclusion the contract was not in breach of the prohibitions of this Regulation in force at that time.
The terms and conditions of drawdowns and disbursements referred to in point (a) include provisions concerning the length of the repayment period for each drawdown or disbursement, the interest rate applied or the interest rate calculation method, and the maximum amount.
Article 5a
It shall be prohibited to directly or indirectly purchase, sell, provide investment services for or assistance in the issuance of, or otherwise deal with transferable securities and money-market instruments issued after 9 March 2022 by:
Russia and its government; or
the Central Bank of Russia; or
a legal person, entity or body acting on behalf or at the direction of the entity referred to in point (b).
The prohibition shall not apply to loans or credit that have a specific and documented objective to provide financing for non-prohibited imports or exports of goods and non-financial services between the Union and any third State, including the expenditure for goods and services from another third State that is necessary for executing the export or import contracts.
The prohibition in paragraph 2 shall not apply to drawdown or disbursements made under a contract concluded before 23 February 2022 provided that the following conditions are met:
all the terms and conditions of such drawdown or disbursements:
were agreed before 23 February 2022; and
have not been modified on or after that date; and
before 23 February 2022 a contractual maturity date has been fixed for the repayment in full of all funds made available and for the cancellation of all the commitments, rights and obligations under the contract.
The terms and conditions of drawdowns and disbursements referred to in point (a) include provisions concerning the length of the repayment period for each drawdown or disbursement, the interest rate applied or the interest rate calculation method, and the maximum amount.
Article 5aa
It shall be prohibited to directly or indirectly engage in any transaction with:
a legal person, entity or body established in Russia, which is publically controlled or with over 50 % public ownership or in which Russia, its Government or Central Bank has the right to participate in profits or with which Russia, its Government or Central Bank has other substantial economic relationship, as listed in Annex XIX;
a legal person, entity or body established outside the Union whose proprietary rights are directly or indirectly owned for more than 50 % by an entity listed in Annex XIX; or
a legal person, entity or body acting on behalf or at the direction of an entity referred to in point (a) or (b) of this paragraph.
The prohibition in paragraph 1 shall not apply to:
transactions which are strictly necessary for the direct or indirect purchase, import or transport of natural gas, titanium, aluminium, copper, nickel, palladium and iron ore from or through Russia into the Union, a country member of the European Economic Area, Switzerland, or the Western Balkans;
unless prohibited under Article 3m or 3n, transactions which are strictly necessary for the direct or indirect purchase, import or transport of oil, including refined petroleum products, from or through Russia;
transactions related to energy projects outside Russia in which a legal person, entity or body listed in Annex XIX is a minority shareholder;
transactions for the purchase, import or transport into the Union of coal and other solid fossil fuels, as listed in Annex XXII until 10 August 2022;
transactions, including sales, which are strictly necessary for the wind-down, by 31 December 2022, of a joint venture or similar legal arrangement concluded before 16 March 2022, involving a legal person, entity or body referred to in paragraph 1;
transactions related to the provision of electronic communication services, data center services, and the provision of services and equipment necessary for their operation, maintenance, security, including the provision of firewalls, and call center services, to a legal person, entity or body listed in Annex XIX;
transactions which are necessary for the purchase, import or transport of pharmaceutical, medical, agricultural and food products, including wheat and fertilisers whose import, purchase and transport is allowed under this Regulation;
transactions which are strictly necessary to ensure access to judicial, administrative or arbitral proceedings in a Member State, as well as for the recognition or enforcement of a judgment or an arbitration award rendered in a Member State and if such transactions are consistent with the objectives of this Regulation and Regulation (EU) No 269/2014.
By way of derogation from the procedure laid down in Article 7(3) of Regulation (EC) No 391/2009 of the European Parliament and of the Council ( 13 ) and in Article 21(3) of Directive (EU) 2016/1629 of the European Parliament and of the Council ( 14 ), the Union's recognition of the Russian Maritime Register of Shipping under Regulation (EC) No 391/2009 and Directive (EU) 2016/1629 is withdrawn.
Article 5b
▼M16 —————
Article 5c
By way of derogation from Articles 5b(1) and (2), the competent authorities may authorise the acceptance of such a deposit or the provision of wallet, account or custody service, under such conditions as they deem appropriate, after having determined that the acceptance of such a deposit or the provision of wallet, account or custody service is:
necessary to satisfy the basic needs of natural or legal persons, entities or bodies referred to in Article 5b(1) and their dependent family members, including payments for food, rent or mortgage, medicines and medical treatment, taxes, insurance premiums, and public utility charges;
intended exclusively for the payment of reasonable professional fees or the reimbursement of incurred expenses associated with the provision of legal services;
intended exclusively for the payment of fees or service charges for the routine holding or maintenance of frozen funds or economic resources;
necessary for extraordinary expenses, provided that the relevant competent authority has notified the competent authorities of the other Member States and the Commission of the grounds on which it considers that a specific authorisation should be granted, at least two weeks prior to the authorisation; or
necessary for official purposes of a diplomatic mission or consular post or international organisation; or
necessary for non-prohibited cross-border trade in goods and services between the Union and Russia.
Article 5d
By way of derogation from Articles 5b(1) and (2), the competent authorities may authorise the acceptance of such a deposit or provision of wallet, account or custody service, under such conditions as they deem appropriate, after having determined that the acceptance of such a deposit or provision of wallet, account or custody service is:
necessary for humanitarian purposes, such as delivering or facilitating the delivery of assistance, including medical supplies, food, or the transfer of humanitarian workers and related assistance or for evacuations; or
necessary for civil society activities that directly promote democracy, human rights or the rule of law in Russia.
Article 5e
Article 5f
Article 5g
Without prejudice to the applicable rules concerning reporting, confidentiality and professional secrecy, credit institutions shall:
supply to the national competent authority of the Member State where they are located or to the Commission by no later than 27 May 2022, a list of deposits exceeding 100 000 EUR held by Russian nationals or natural persons residing in Russia, or by legal persons, entities or bodies established in Russia. They shall provide updates regarding the amounts of such deposits every 12 months.
supply to the national competent authority of the Member State where they are located information on deposits exceeding EUR 100 000 held by Russian nationals or natural persons residing in Russia who have acquired the citizenship of a Member State or residence rights in a Member State through an investor citizenship scheme or an investor residence scheme.
Article 5h
Article 5i
The prohibition in paragraph 1 shall not apply to the sale, supply, transfer or export of banknotes denominated in any official currency of a Member State provided that such sale, supply, transfer or export is necessary for:
the personal use of natural persons travelling to Russia or members of their immediate families travelling with them; or
the official purposes of diplomatic missions, consular posts or international organisations in Russia enjoying immunities in accordance with international law.
Article 5j
Article 5k
It shall be prohibited to award or continue the execution of any public or concession contract falling within the scope of the public procurement Directives, as well as Article 10(1), (3), (6) points (a) to (e), (8), (9) and (10), Articles 11, 12, 13 and 14 of Directive 2014/23/EU, Article 7, points (a) to (d), and Article 8, Article 10 points (b) to (f) and (h) to (j) of Directive 2014/24/EU, Article 18, Article 21 points (b) to (e) and (g) to (i), Articles 29 and 30 of Directive 2014/25/EU and Article 13 points (a) to (d), (f) to (h) and (j) of Directive 2009/81/EC, and Title VII of Regulation (EU, Euratom) 2018/1046, to or with:
a Russian national, a natural person residing in Russia, or a legal person, entity or body established in Russia;
a legal person, entity or body whose proprietary rights are directly or indirectly owned for more than 50 % by an entity referred to in point (a) of this paragraph; or
a natural or legal person, entity or body acting on behalf or at the direction of an entity referred to in point (a) or (b) of this paragraph,
including, where they account for more than 10 % of the contract value, subcontractors, suppliers or entities whose capacities are being relied on within the meaning of the public procurement Directives.
By way of derogation from paragraph 1, the competent authorities may authorise the award and continued execution of contracts intended for:
the operation, maintenance, decommissioning and radioactive waste management, fuel supply and retreatment and safety of civil nuclear capabilities, and the continuation of design, construction and commissioning required for the completion of civil nuclear facilities, as well as the supply of precursor material for the production of medical radioisotopes and similar medical applications, critical technology for environmental radiation monitoring, as well as civil nuclear cooperation, in particular in the field of research and development;
intergovernmental cooperation in space programmes;
the provision of strictly necessary goods or services which can only be provided, or which can only be provided in sufficient quantities, by the persons referred to in paragraph 1;
the functioning of diplomatic and consular representations of the Union and of the Member States in Russia, including delegations, embassies and missions, or international organisations in Russia enjoying immunities in accordance with international law;
unless prohibited under Article 3m or 3n, the purchase, import or transport of natural gas and oil, including refined petroleum products, as well as titanium, aluminium, copper, nickel, palladium and iron ore from or through Russia into the Union; or
the purchase, import or transport into the Union of coal and other solid fossil fuels, as listed in Annex XXII until 10 August 2022.
Article 5l
The prohibition in paragraph 1 shall not apply to:
humanitarian purposes, public health emergencies, the urgent prevention or mitigation of an event likely to have a serious and significant impact on human health and safety or the environment, or as a response to natural disasters;
phytosanitary and veterinary programmes;
intergovernmental cooperation in space programmes and under the International Thermonuclear Experimental Reactor Agreement;
the operation, maintenance, decommissioning and radioactive waste management, fuel supply and retreatment and safety of civil nuclear capabilities, as well as supply of precursor material for the production of medical radioisotopes and similar medical applications, critical technology for environmental radiation monitoring, as well as civil nuclear cooperation, in particular in the field of research and development;
mobility exchanges for individuals and people-to-people contacts;
climate and environmental programmes, with the exception of support in the context of research and innovation;
the functioning of diplomatic and consular representations of the Union and of the Member States in Russia, including delegations, embassies and missions, or international organisations in Russia enjoying immunities in accordance with international law.
Article 5m
It shall be prohibited to register, provide a registered office, business or administrative address as well as management services to, a trust or any similar legal arrangement having as a trustor or a beneficiary:
Russian nationals or natural persons residing in Russia;
legal persons, entities or bodies established in Russia;
legal persons, entities or bodies whose proprietary rights are directly or indirectly owned for more than 50 % by a natural or legal person, entity or body referred to in points (a) or (b);
legal persons, entities or bodies controlled by a natural or legal person, entity or body referred to in points (a), (b) or (c);
a natural or legal person, entity or body acting on behalf or at the direction of a natural or legal person, entity or body referred to in points (a), (b), (c) or (d).
By way of derogation from paragraph 2, the competent authorities may authorise, under such conditions as they deem appropriate, the services referred to in paragraph 2 to continue beyond 5 July 2022, for:
the completion by 5 September 2022 of operations strictly necessary for the termination of contracts referred to in paragraph 3, provided that such operations were initiated before 11 May 2022; or
other reasons, provided that the service providers do not accept from, or make available to, the persons referred to in paragraph 1 any funds or economic resources, directly or indirectly, or otherwise provide such persons with any benefit from assets placed in a trust.
By way of derogation from paragraphs 1 and 2, the competent authorities may authorise the services referred to in those paragraphs, under such conditions as they deem appropriate, after having determined that this is necessary for:
humanitarian purposes, such as delivering or facilitating the delivery of assistance, including medical supplies, food, or the transfer of humanitarian workers and related assistance or for evacuations;
civil society activities that directly promote democracy, human rights or the rule of law in Russia; or
the operation of trusts whose purpose is the administration of occupational pension schemes, insurance policies or employee share scheme, charities, amateur sports clubs, and funds for minors or vulnerable adults.
Article 5n
It shall be prohibited to provide, directly or indirectly, accounting, auditing, including statutory audit, bookkeeping or tax consulting services, or business and management consulting or public relations services to:
the Government of Russia; or
legal persons, entities or bodies established in Russia.
It shall be prohibited to provide, directly or indirectly, architectural and engineering services, legal advisory services and IT consultancy services to:
the Government of Russia; or
legal persons, entities or bodies established in Russia.
By way of derogation from paragraphs 1 and 2, the competent authorities may authorise the services referred to therein, under such conditions as they deem appropriate, after having determined that this is necessary for:
humanitarian purposes such as delivering or facilitating the delivery of assistance, including medical supplies, food, or the transfer of humanitarian workers and related assistance, or for evacuations;
civil society activities that directly promote democracy, human rights or the rule of law in Russia; or
the functioning of diplomatic and consular representations of the Union and of the Member States or partner countries in Russia, including delegations, embassies and missions, or international organisations in Russia enjoying immunities in accordance with international law.
By way of derogation from paragraphs 1 and 2, the competent authorities may authorise the services referred to therein, under such conditions as they deem appropriate, after having determined that this is necessary for:
ensuring critical energy supply within the Union and the purchase, import or transport into the Union of titanium, aluminium, copper, nickel, palladium and iron ore;
ensuring the continuous operation of infrastructures, hardware and software which are critical for human health and safety, or the safety of the environment;
the establishment, operation, maintenance, fuel supply and retreatment and safety of civil nuclear capabilities, and the continuation of design, construction and commissioning required for the completion of civil nuclear facilities, the supply of precursor material for the production of medical radioisotopes and similar medical applications, or critical technology for environmental radiation monitoring, as well as for civil nuclear cooperation, in particular in the field of research and development; or
the provision of electronic communication services by Union telecommunication operators necessary for the operation, maintenance and security, including cybersecurity, of electronic communication services, in Russia, in Ukraine, in the Union, between Russia and the Union, and between Ukraine and the Union, and for data centre services in the Union.
Article 6
The Member States and the Commission shall inform each other of the measures taken under this Regulation and share any other relevant information at their disposal in connection with this Regulation, in particular information in respect of:
authorisations granted under this Regulation;
information received under Article 5g;
violation and enforcement problems and judgments handed down by national courts;
detected instances of breach, circumvention and attempts at breach or circumvention of the prohibitions set out in this Regulation through the use of crypto-assets.
Article 7
The Commission shall be empowered to amend Annexes I and IX on the basis of information supplied by Member States.
Article 7a
The Commission shall amend:
Annex XXVIII in accordance with the decisions of the Council amending Decision 2014/512/CFSP to update the prices agreed by the Price Cap Coalition; and
Annex XXIX, in accordance with the decisions of the Council amending Decision 2014/512/CFSP to update the list of exempted energy projects on the basis of objective eligibility criteria agreed by the Price Cap Coalition.
Article 8
Article 9
Article 10
Actions by natural or legal persons, entities or bodies shall not give rise to liability of any kind on their part, if they did not know, and had no reasonable cause to suspect, that their actions would infringe the measures set out in this Regulation.
Article 11
No claims in connection with any contract or transaction the performance of which has been affected, directly or indirectly, in whole or in part, by the measures imposed under this Regulation, including claims for indemnity or any other claim of this type, such as a claim for compensation or a claim under a guarantee, notably a claim for extension or payment of a bond, guarantee or indemnity, particularly a financial guarantee or financial indemnity, of whatever form, shall be satisfied, if they are made by:
legal persons, entities or bodies listed in the Annexes to this Regulation or legal persons, entities or bodies established outside the Union whose proprietary rights are directly or indirectly owned for more than 50 % by them;
any other Russian person, entity or body;
any person, entity or body acting through or on behalf of one of the persons, entities or bodies referred to in points (a) or (b) of this paragraph.
Article 12
It shall be prohibited to participate, knowingly and intentionally, in activities the object or effect of which is to circumvent prohibitions in this Regulation.
Article 12a
Article 13
This Regulation shall apply:
within the territory of the Union;
on board any aircraft or any vessel under the jurisdiction of a Member State;
to any person inside or outside the territory of the Union who is a national of a Member State;
to any legal person, entity or body, inside or outside the territory of the Union, which is incorporated or constituted under the law of a Member State;
to any legal person, entity or body in respect of any business done in whole or in part within the Union.
Article 14
This Regulation shall enter into force on the day following that of its publication in the Official Journal of the European Union.
This Regulation shall be binding in its entirety and directly applicable in all Member States.
ANNEX I
BELGIUM
https://diplomatie.belgium.be/en/policy/policy_areas/peace_and_security/sanctions
BULGARIA
https://www.mfa.bg/en/EU-sanctions
CZECHIA
www.financnianalytickyurad.cz/mezinarodni-sankce.html
DENMARK
http://um.dk/da/Udenrigspolitik/folkeretten/sanktioner/
GERMANY
https://www.bmwi.de/Redaktion/DE/Artikel/Aussenwirtschaft/embargos-aussenwirtschaftsrecht.html
ESTONIA
https://vm.ee/et/rahvusvahelised-sanktsioonid
IRELAND
https://www.dfa.ie/our-role-policies/ireland-in-the-eu/eu-restrictive-measures/
GREECE
http://www.mfa.gr/en/foreign-policy/global-issues/international-sanctions.html
SPAIN
https://www.exteriores.gob.es/es/PoliticaExterior/Paginas/SancionesInternacionales.aspx
FRANCE
http://www.diplomatie.gouv.fr/fr/autorites-sanctions/
CROATIA
https://mvep.gov.hr/vanjska-politika/medjunarodne-mjere-ogranicavanja/22955
ITALY
https://www.esteri.it/it/politica-estera-e-cooperazione-allo-sviluppo/politica_europea/misure_deroghe/
CYPRUS
https://mfa.gov.cy/themes/
LATVIA
http://www.mfa.gov.lv/en/security/4539
LITHUANIA
http://www.urm.lt/sanctions
LUXEMBOURG
https://maee.gouvernement.lu/fr/directions-du-ministere/affaires-europeennes/organisations-economiques-int/mesures-restrictives.html
HUNGARY
https://kormany.hu/kulgazdasagi-es-kulugyminiszterium/ensz-eu-szankcios-tajekoztato
MALTA
https://foreignandeu.gov.mt/en/Government/SMB/Pages/SMB-Home.aspx
NETHERLANDS
https://www.rijksoverheid.nl/onderwerpen/internationale-sancties
AUSTRIA
https://www.bmeia.gv.at/themen/aussenpolitik/europa/eu-sanktionen-nationale-behoerden/
POLAND
https://www.gov.pl/web/dyplomacja/sankcje-miedzynarodowe
https://www.gov.pl/web/diplomacy/international-sanctions
PORTUGAL
https://www.portaldiplomatico.mne.gov.pt/politica-externa/medidas-restritivas
ROMANIA
http://www.mae.ro/node/1548
SLOVENIA
http://www.mzz.gov.si/si/omejevalni_ukrepi
SLOVAKIA
https://www.mzv.sk/europske_zalezitosti/europske_politiky-sankcie_eu
FINLAND
https://um.fi/pakotteet
SWEDEN
https://www.regeringen.se/sanktioner
Address for notifications to the European Commission:
European Commission
Directorate-General for Financial Stability, Financial Services and Capital Markets Union (DG FISMA)
Rue de Spa 2
B-1049 Brussels, Belgium
E-mail: relex-sanctions@ec.europa.eu
ANNEX II
List of items referred to in Article 3
|
CN code |
Description |
|
7304 11 00 |
Line pipe of a kind used for oil or gas pipelines, seamless, of stainless steel |
|
7304 19 10 |
Line pipe of a kind used for oil or gas pipelines, seamless, of iron or steel, of an external diameter not exceeding 168,3 mm (excl. products of stainless steel or of cast iron) |
|
7304 19 30 |
Line pipe of a kind used for oil or gas pipelines, seamless, of iron or steel, of an external diameter exceeding 168,3 mm but not exceeding 406,4 mm (excl. products of stainless steel or of cast iron) |
|
7304 19 90 |
Line pipe of a kind used for oil or gas pipelines, seamless, of iron or steel, of an external diameter exceeding 406,4 mm (excl. products of stainless steel or of cast iron) |
|
7304 22 00 |
Drill pipe, seamless, of stainless steel, of a kind used in drilling for oil or gas |
|
7304 23 00 |
Drill pipe, seamless, of a kind used in drilling for oil or gas, of iron or steel (excl. products of stainless steel or of cast iron) |
|
7304 29 10 |
Casing and tubing of a kind used for drilling for oil or gas, seamless, of iron or steel, of an external diameter not exceeding 168,3 mm (excl. products of cast iron) |
|
7304 29 30 |
Casing and tubing of a kind used for drilling for oil or gas, seamless, of iron or steel, of an external diameter exceeding 168,3 mm, but not exceeding 406,4 mm (excl. products of cast iron) |
|
7304 29 90 |
Casing and tubing of a kind used for drilling for oil or gas, seamless, of iron or steel, of an external diameter exceeding 406,4 mm (excl. products of cast iron) |
|
7305 11 00 |
Line pipe of a kind used for oil or gas pipelines, having circular cross-sections and an external diameter of exceeding 406,4 mm, of iron or steel, longitudinally submerged arc welded |
|
7305 12 00 |
Line pipe of a kind used for oil or gas pipelines, having circular cross-sections and an external diameter of exceeding 406,4 mm, of iron or steel, longitudinally arc welded (excl. products longitudinally submerged arc welded) |
|
7305 19 00 |
Line pipe of a kind used for oil or gas pipelines, having circular cross-sections and an external diameter of exceeding 406,4 mm, of flat-rolled products of iron or steel (excl. products longitudinally arc welded) |
|
7305 20 00 |
Casing of a kind used in drilling for oil or gas, having circular cross-sections and an external diameter of exceeding 406,4 mm, of flat-rolled products of iron or steel |
|
7306 11 |
Line pipe of a kind used for oil or gas pipelines, welded, of flat-rolled products of stainless steel, of an external diameter of not exceeding 406,4 mm |
|
7306 19 |
Line pipe of a kind used for oil or gas pipelines, welded, of flat-rolled products of iron or steel, of an external diameter of not exceeding 406,4 mm (excl. products of stainless steel or of cast iron) |
|
7306 21 00 |
Casing and tubing of a kind used in drilling for oil or gas, welded, of flat-rolled products of stainless steel, of an external diameter of not exceeding 406,4 mm |
|
7306 29 00 |
Casing and tubing of a kind used in drilling for oil or gas, welded, of flat-rolled products of iron or steel, of an external diameter of not exceeding 406,4 mm (excl. products of stainless steel or of cast iron) |
|
8207 13 00 |
Rock-drilling or earth-boring tools, interchangeable, with working parts of sintered metal carbides or cermets |
|
8207 19 10 |
Rock-drilling or earth-boring tools, interchangeable, with working parts of diamond or agglomerated diamond |
|
ex 8413 50 |
Reciprocating positive displacement pumps for liquids, power-driven with a maximum flow-rate greater than 18 m3/hour and a maximum outlet pressure greater than 40 bar, specially designed to pump drilling muds and/or cement into oil wells |
|
ex 8413 60 |
Rotary positive displacement pumps for liquids, power-driven with a maximum flow-rate greater than 18 m3/hour and a maximum outlet pressure greater than 40 bar, specially designed to pump drilling muds and/or cement into oil wells |
|
8413 82 00 |
Liquid elevators (excl. pumps) |
|
8413 92 00 |
Parts of liquid elevators, n.e.s. |
|
8430 49 00 |
Boring or sinking machinery for boring earth or extracting minerals or ores, not self-propelled and not hydraulic (excl. tunnelling machinery and hand-operated tools) |
|
ex 8431 39 00 |
Parts suitable for use solely or principally with the oil field machinery of heading 8428 |
|
ex 8431 43 00 |
Parts suitable for use solely or principally with the oil field machinery of subheadings 8430 41 or 8430 49 |
|
ex 8431 49 |
Parts suitable for use solely or principally with the oil field machinery of heading 8426 , 8429 and 8430 |
|
8705 20 00 |
Mobile drilling derricks |
|
8905 20 00 |
Floating or submersible drilling or production platforms |
|
8905 90 10 |
Sea-going light vessels, fire-floats, floating cranes and other vessels, the navigability of which is subsidiary to their main function (excl. dredgers, floating or submersible drilling or production platforms; fishing vessels and warships) |
ANNEX III
List of legal persons, entities and bodies referred to in Article 5(1)(a)
SBERBANK
VTB BANK
GAZPROMBANK
VNESHECONOMBANK (VEB)
ROSSELKHOZBANK
ANNEX IV
List of natural or legal persons, entities or bodies, referred to in Article 2(7), 2a(7) and 2b(1)
ANNEX V
List of legal persons, entities and bodies referred to in Article 5(3)(a)
ANNEX VI
List of legal persons, entities and bodies referred to in Article 5(3)(b)
ANNEX VII
List of goods and technology referred to in Articles 2a(1) and 2b(1)
Part A
General Notes, Acronyms and Abbreviations, and Definitions in Annex I to Regulation (EU) 2021/821 apply to this Annex, with the exception of ‘Part I - General Notes, Acronyms and Abbreviations, and Definitions, General Notes to Annex I, point 2.’.
Definitions of Terms used in the Common Military List (CML) of the European Union (2020/C 85/01) apply to this Annex.
Without prejudice to Article 12 of this Regulation, non-controlled items containing one or more components listed in this Annex are not subject to the controls under Articles 2a and 2b of this Regulation.
Category I - Electronics
Electronic devices and components.
‘Microprocessor microcircuits’, ‘microcomputer microcircuits’, and microcontroller microcircuits having any of the following:
A performance speed of 5 GFLOPS or more and an arithmetic logic unit with an access width of 32 bit or more;
A clock frequency rate exceeding 25 MHz; or
More than one data or instruction bus or serial communication port that provides a direct external interconnection between parallel ‘microprocessor microcircuits’ with a transfer rate of 2,5 Mbyte/s;
Storage integrated circuits, as follows:
Electrically erasable programmable read-only memories (EEPROMs) with a storage capacity;
Exceeding 16 Mbits per package for flash memory types; or
Exceeding either of the following limits for all other EEPROM types:
Exceeding 1 Mbit per package; or
Exceeding 256 kbit per package and a maximum access time of less than 80 ns;
Static random access memories (SRAMs) with a storage capacity:
Exceeding 1 Mbit per package; or
Exceeding 256 kbit per package and a maximum access time of less than 25 ns;
Analog-to-digital converters having any of the following:
A resolution of 8 bit or more, but less than 12 bit, with an output rate greater than 200 Mega Samples Per Second (MSPS);
A resolution of 12 bit with an output rate greater than 105 Mega Samples per Second (MSPS);
A resolution of more than 12 bit but equal to or less than 14 bit with an output rate greater than 10 Mega Samples per Second (MSPS); or
A resolution of more than 14 bit with an output rate greater than 2,5 Mega Samples Per Second (MSPS);
Field programmable logic devices having a maximum number of single-ended digital input/outputs between 200 and 700;
Fast Fourier Transform (FFT) processors having a rated execution time for a 1 024 point complex FFT of less than 1 ms;
Custom integrated circuits for which the function is unknown, or the control status of the equipment in which the integrated circuits will be used is unknown to the manufacturer, having any of the following:
More than 144 terminals; or
A typical ‘basic propagation delay time’ of less than 0,4 ns;
Traveling-wave ‘vacuum electronic devices’, pulsed or continuous wave, as follows:
Coupled cavity devices, or derivatives thereof;
Devices based on helix, folded waveguide, or serpentine waveguide circuits, or derivatives thereof, having any of the following:
An ‘instantaneous bandwidth’ of half an octave or more and average power (expressed in kW) times frequency (expressed in GHz) of more than 0,2; or
An ‘instantaneous bandwidth’ of less than half an octave; and average power (expressed in kW) times frequency (expressed in GHz) of more than 0,4;
Flexible waveguides designed for use at frequencies exceeding 40 GHz;
Surface acoustic wave and surface skimming (shallow bulk) acoustic wave devices, having either of the following:
A carrier frequency exceeding 1 GHz; or
A carrier frequency of 1 GHz or less; and
A ‘frequency side-lobe rejection’ exceeding 55 dB;
A product of the maximum delay time and bandwidth (time in microseconds and bandwidth in MHz) of more than 100; or
A dispersive delay of more than 10 microseconds;
Technical Note: For the purpose of X.A.I.001.i 'Frequency side-lobe rejection' is the maximum rejection value specified in data sheet.
‘Cells’ as follows:
‘Primary cells’ having an ‘energy density’ of 550 Wh/kg or less at 293 K (20°C);
‘Secondary cells’ having an ‘energy density’ of 350 Wh/kg or less at 293 K (20°C);
Note: X.A.I.001.j does not control batteries, including single cell batteries.
Technical Notes:
For the purpose of X.A.I.001.j energy density (Wh/kg) is calculated from the nominal voltage multiplied by the nominal capacity in ampere-hours (Ah) divided by the mass in kilograms. If the nominal capacity is not stated, energy density is calculated from the nominal voltage squared then multiplied by the discharge duration in hours divided by the discharge load in Ohms and the mass in kilograms.
For the purpose of X.A.I.001.j, a ‘cell’ is defined as an electrochemical device, which has positive and negative electrodes, and electrolyte, and is a source of electrical energy. It is the basic building block of a battery.
For the purpose of X.A.I.001.j.1, a ‘primary cell’ is a ‘cell’ that is not designed to be charged by any other source.
For the purpose of X.A.I.001.j.2, a ‘secondary cell’ is a ‘cell’ that is designed to be charged by an external electrical source.
‘Superconductive’ electromagnets or solenoids specially designed to be fully charged or discharged in less than one minute, having all of the following:
Note: X.A.I.001.k does not control ‘superconductive’ electromagnets or solenoids designed for Magnetic Resonance Imaging (MRI) medical equipment.
Maximum energy delivered during the discharge divided by the duration of the discharge of more than 500 kJ per minute;
Inner diameter of the current carrying windings of more than 250 mm; and
Rated for a magnetic induction of more than 8T or ‘overall current density’ in the winding of more than 300 A/mm2;
Circuits or systems for electromagnetic energy storage, containing components manufactured from ‘superconductive’ materials specially designed for operation at temperatures below the ‘critical temperature’ of at least one of their ‘superconductive’ constituents, having all of the following:
Resonant operating frequencies exceeding 1 MHz;
A stored energy density of 1 MJ/m3 or more; and
A discharge time of less than 1 ms;
Hydrogen/hydrogen-isotope thyratrons of ceramic-metal construction and rate for a peak current of 500 A or more;
Not used;
Solar cells, cell-interconnect-coverglass (CIC) assemblies, solar panels, and solar arrays, which are ‘space qualified’ and not controlled by 3A001.e.4 ( 20 ).
General purpose "electronic assemblies", modules and equipment.
Electronic test equipment, other than those specified in the CML or in Regulation (EU) 2021/821;
Digital instrumentation magnetic tape data recorders having any of the following characteristics;
A maximum digital interface transfer rate exceeding 60 Mbit/s and employing helical scan techniques;
A maximum digital interface transfer rate exceeding 120 Mbit/s and employing fixed head techniques; or
‘Space qualified’;
Equipment, with a maximum digital interface transfer rate exceeding 60 Mbit/s, designed to convert digital video magnetic tape recorders for use as digital instrumentation data recorders;
Non-modular analog oscilloscopes having a bandwidth of 1 GHz or greater;
Modular analog oscilloscope systems having either of the following characteristics:
A mainframe with a bandwidth of 1 GHz or greater; or
Plug-in modules with an individual bandwidth of 4 GHz or greater;
Analog sampling oscilloscopes for the analysis of recurring phenomena with an effective bandwidth greater than 4 GHz;
Digital oscilloscopes and transient recorders, using analog-to-digital conversion techniques, capable of storing transients by sequentially sampling single-shot inputs at successive intervals of less than 1 ns (greater than 1 Giga Samples per Second (GSPS)), digitizing to 8 bits or greater resolution and storing 256 or more samples.
Note: X.A.I.002 controls the following specially designed components for analog oscilloscopes:
Plug-in units;
External amplifiers;
Pre-amplifiers;
Sampling devices;
Cathode ray tubes.
Specific processing equipment, other than those specified in the CML or in Regulation (EU) 2021/821, as follows:
Frequency changers and their specially designed components, other than those specified in the CML or in Regulation (EU) 2021/821;
Mass spectrometers, other than those specified in the CML or in Regulation (EU) 2021/821;
All flash x-ray machines, or components of pulsed power systems designed thereof, including Marx generators, high power pulse shaping networks, high voltage capacitors, and triggers;
Pulse amplifiers, other than those specified in the CML or in Regulation (EU) 2021/821;
Electronic equipment for time delay generation or time interval measurement, as follows:
Digital time delay generators with a resolution of 50 nanoseconds or less over time intervals of 1 microsecond or greater; or
Multi-channel (three or more) or modular time interval meter and chronometry equipment with resolution of 50 nanoseconds or less over time intervals of 1 microsecond or greater;
Chromatography and spectrometry analytical instruments.
Equipment for the manufacture of electronic components or materials, as follows and specially designed components and accessories therefor.
Equipment specially designed for the manufacture of electron tubes, optical elements and specially designed components therefor controlled by 3A001 ( 21 ) or X.A.I.001;
Equipment specially designed for the manufacture of semiconductor devices, integrated circuits and ‘electronic assemblies’, as follows, and systems incorporating or having the characteristics of such equipment:
Note: X.B.I.001.b. also controls equipment used or modified for use in the manufacture of other devices, such as imaging devices, electro-optical devices, acoustic-wave devices.
Equipment for the processing of materials for the manufacture of devices and components as specified in the heading of X.B.I.001.b, as follows:
Note: X.B.I.001 does not control quartz furnace tubes, furnace liners, paddles, boats (except specially designed caged boats), bubblers, cassettes or crucibles specially designed for the processing equipment controlled by X.B.I.001.b.1.
Equipment for producing polycrystalline silicon and materials controlled by 3C001 ( 22 );
Equipment specially designed for purifying or processing III/V and II/VI semiconductor materials controlled by 3C001, 3C002, 3C003, 3C004, or 3C005 ( 23 ) except crystal pullers, for which see X.B.I.001.b.1.c below;
Crystal pullers and furnaces, as follows:
Note: X.B.I.001.b.1.c does not control diffusion and oxidation furnaces.
Annealing or recrystallizing equipment other than constant temperature furnaces employing high rates of energy transfer capable of processing wafers at a rate exceeding 0,005 m2 per minute;
‘Stored program controlled’ crystal pullers having any of the following characteristics:
Rechargeable without replacing the crucible container;
Capable of operation at pressures above 2,5 x 105 Pa; or
Capable of pulling crystals of a diameter exceeding 100 mm;
‘Stored program controlled’ equipment for epitaxial growth having any of the following characteristics:
Capable of producing silicon layer with a thickness uniform to less than ± 2,5 % across a distance of 200 mm or more;
Capable of producing a layer of any material other than silicon with a thickness uniformity across the wafer of equal to or better than ± 3,5 %; or
Rotation of individual wafers during processing;
Molecular beam epitaxial growth equipment;
Magnetically enhanced ‘sputtering’ equipment with specially designed integral load locks capable of transferring wafers in an isolated vacuum environment;
Equipment specially designed for ion implantation, ion-enhanced or photo-enhanced diffusion, having any of the following characteristics:
Patterning capability;
Beam energy (accelerating voltage) exceeding 200 keV;
Optimised to operate at a beam energy (accelerating voltage) of less than 10 keV; or
Capable of high energy oxygen implant into a heated ‘substrate’;
‘Stored program controlled’ equipment for the selective removal (etching) by means of anisotropic dry methods (e.g., plasma), as follows:
‘Batch types’ having either of the following:
End-point detection, other than optical emission spectroscopy types; or
Reactor operational (etching) pressure of 26,66 Pa or less;
‘Single wafer types’ having any of the following:
End-point detection, other than optical emission spectroscopy types;
Reactor operational (etching) pressure of 26,66 Pa or less; or
Cassette-to-cassette and load locks wafer handling;
Notes:
‘Batch types’ refers to machines not specially designed for production processing of single wafers. Such machines can process two or more wafers simultaneously with common process parameters, e.g., RF power, temperature, etch gas species, flow rates.
‘Single wafer types’ refers to machines specially designed for production processing of single wafers. These machines may use automatic wafer handling techniques to load a single wafer into the equipment for processing. The definition includes equipment that can load and process several wafers but where the etching parameters, e.g., RF power or end point, can be independently determined for each individual wafer.
‘Chemical vapor deposition’ (CVD) equipment, e.g., plasma-enhanced CVD (PECVD) or photo-enhanced CVD, for semiconductor device manufacturing, having either of the following capabilities, for deposition of oxides, nitrides, metals or polysilicon:
‘Chemical vapor deposition’ equipment operating below 105 Pa; or
PECVD equipment operating either below 60 Pa or having automatic cassette-to-cassette and load lock wafer handling;
Note: X.B.I.001.b.1.i does not control low pressure ‘chemical vapor deposition’ (LPCVD) systems or reactive ‘sputtering’ equipment.
Electron beam systems specially designed or modified for mask making or semiconductor device processing having any of the following characteristics:
Electrostatic beam deflection;
Shaped, non-Gaussian beam profile;
Digital-to-analog conversion rate exceeding 3 MHz;
Digital-to-analog conversion accuracy exceeding 12 bit; or
Target-to-beam position feedback control precision of 1 micrometer or finer;
Note: X.B.I.001.b.1.j does not control electron beam deposition systems or general purpose scanning electron microscopes.
Surface finishing equipment for the processing of semiconductor wafers as follows:
Specially designed equipment for backside processing of wafers thinner than 100 micrometer and the subsequent separation thereof; or
Specially designed equipment for achieving a surface roughness of the active surface of a processed wafer with a two-sigma value of 2 micrometer or less, total indicator reading (TIR);
Note: X.B.I.001.b.1.k does not control single-side lapping and polishing equipment for wafer surface finishing.
Interconnection equipment which includes common single or multiple vacuum chambers specially designed to permit the integration of any equipment controlled by X.B.I.001 into a complete system;
‘Stored program controlled’ equipment using ‘lasers’ for the repair or trimming of ‘monolithic integrated circuits’ with either of the following characteristics:
Positioning accuracy less than ± 1 micrometer; or
Spot size (kerf width) less than 3 micrometer.
Technical Note: For the purpose of X.B.I.001.b.1, 'sputtering' is an overlay coating process wherein positively charged ions are accelerated by an electric field towards the surface of a target (coating material). The kinetic energy of the impacting ions is sufficient to cause target surface atoms to be released and deposited on the substrate. (Note: Triode, magnetron or radio frequency sputtering to increase adhesion of coating and rate of deposition are ordinary modifications of the process.).
Masks, mask substrates, mask-making equipment and image transfer equipment for the manufacture of devices and components as specified in the heading of X.B.I.001, as follows:
Note: The term masks refers to those used in electron beam lithography, X-ray lithography, and ultraviolet lithography, as well as the usual ultraviolet and visible photo-lithography.
Finished masks, reticles and designs therefor, except:
Finished masks or reticles for the production of integrated circuits not controlled by 3A001 ( 24 ); or
Masks or reticles, having both of the following characteristics:
Their design is based on geometries of 2,5 micrometer or more; and
The design does not include special features to alter the intended use by means of production equipment or ‘software’;
Mask substrates as follows:
Hard surface (e.g., chromium, silicon, molybdenum) coated ‘substrates’ (e.g., glass, quartz, sapphire) for the preparation of masks having dimensions exceeding 125 mm x 125 mm; or
Substrates specially designed for X-ray masks;
Equipment, other than general purpose computers, specially designed for computer aided design (CAD) of semiconductor devices or integrated circuits;
Equipment or machines, as follows, for mask or reticle fabrication:
Photo-optical step and repeat cameras capable of producing arrays larger than 100 mm x 100 mm, or capable of producing a single exposure larger than 6 mm x 6 mm in the image (i.e., focal) plane, or capable of producing line widths of less than 2,5 micrometer in the photoresist on the ‘substrate’;
Mask or reticle fabrication equipment using ion or ‘laser’ beam lithography capable of producing line widths of less than 2,5 micrometer; or
Equipment or holders for altering masks or reticles or adding pellicles to remove defects;
Note: X.B.I.001.b.2.d.1 and b.2.d.2 do not control mask fabrication equipment using photo-optical methods which was either commercially available before the 1st January 1980, or has a performance no better than such equipment.
‘Stored program controlled’ equipment for the inspection of masks, reticles or pellicles with:
A resolution of 0,25 micrometer or finer; and
A precision of 0,75 micrometer or finer over a distance in one or two coordinates of 63,5 mm or more;
Note: X.B.I.001.b.2.e does not control general purpose scanning electron microscopes except when specially designed and instrumented for automatic pattern inspection.
Align and expose equipment for wafer production using photo-optical or X-ray methods, e.g., lithography equipment, including both projection image transfer equipment and step and repeat (direct step on wafer) or step and scan (scanner) equipment, capable of performing any of the following functions:
Note: X.B.I.001.b.2.f does not control photo-optical contact and proximity mask align and expose equipment or contact image transfer equipment.
Production of a pattern size of less than 2,5 micrometer;
Alignment with a precision finer than ± 0,25 micrometer (3 sigma);
Machine-to-machine overlay no better than ± 0,3 micrometer; or
A light source wavelength shorter than 400 nm;
Electron beam, ion beam or X-ray equipment for projection image transfer capable of producing patterns less than 2,5 micrometer;
Note: For focused, deflected-beam systems (direct write systems), see X.B.I.001.b.1.j.
Equipment using ‘lasers’ for direct write on wafers capable of producing patterns less than 2,5 micrometer.
Equipment for the assembly of integrated circuits, as follows:
‘Stored program controlled’ die bonders having all of the following characteristics:
Specially designed for ‘hybrid integrated circuits’;
X-Y stage positioning travel exceeding 37,5 x 37,5 mm; and
Placement accuracy in the X-Y plane of finer than ± 10 micrometer;
‘Stored program controlled’ equipment for producing multiple bonds in a single operation (e.g., beam lead bonders, chip carrier bonders, tape bonders);
Semi-automatic or automatic hot cap sealers, in which the cap is heated locally to a higher temperature than the body of the package, specially designed for ceramic microcircuit packages controlled by 3A001 ( 25 ) and that have a throughput equal to or more than one package per minute.
Note: X.B.I.001.b.3 does not control general purpose resistance type spot welders.
Filters for clean rooms capable of providing an air environment of 10 or less particles of 0,3 micrometer or smaller per 0,02832 m3 and filter materials therefor.
Technical Note: For the purpose of X.B.I.001, 'stored program controlled' is a control using instructions stored in an electronic storage that a processor can execute in order to direct the performance of predetermined functions. Equipment may be 'stored program controlled' whether the electronic storage is internal or external to the equipment.
Equipment for the inspection or testing of electronic components and materials, and specially designed components and accessories therefor.
Equipment specially designed for the inspection or testing of electron tubes, optical elements and specially designed components therefor controlled by 3A001 ( 26 ) or X.A.I.001;
Equipment specially designed for the inspection or testing of semiconductor devices, integrated circuits and ‘electronic assemblies’, as follows, and systems incorporating or having the characteristics of such equipment:
Note: X.B.I.002.b also controls equipment used or modified for use in the inspection or testing of other devices, such as imaging devices, electro-optical devices, acoustic-wave devices.
‘Stored program controlled’ inspection equipment for the automatic detection of defects, errors or contaminants of 0,6 micrometer or less in or on processed wafers, substrates, other than printed circuit boards or chips, using optical image acquisition techniques for pattern comparison;
Note: X.B.I.002.b.1 does not control general purpose scanning electron microscopes, except when specially designed and instrumented for automatic pattern inspection.
Specially designed ‘stored program controlled’ measuring and analysis equipment, as follows:
Specially designed for the measurement of oxygen or carbon content in semiconductor materials;
Equipment for line width measurement with a resolution of 1 micrometer or finer;
Specially designed flatness measurement instruments capable of measuring deviations from flatness of 10 micrometer or less with a resolution of 1 micrometer or finer.
‘Stored program controlled’ wafer probing equipment having any of the following characteristics:
Positioning accuracy finer than 3,5 micrometer;
Capable of testing devices having more than 68 terminals; or
Capable of testing at a frequency exceeding 1 GHz;
Test equipment as follows:
‘Stored program controlled’ equipment specially designed for testing discrete semiconductor devices and unencapsulated dice, capable of testing at frequencies exceeding 18 GHz;
Technical Note: Discrete semiconductor devices include photocells and solar cells.
‘Stored program controlled’ equipment specially designed for testing integrated circuits and ‘electronic assemblies’ thereof, capable of functional testing:
At a ‘pattern rate’ exceeding 20 MHz; or
At a ‘pattern rate’ exceeding 10 MHz but not exceeding 20 MHz and capable of testing packages of more than 68 terminals.
Notes: X.B.I.002.b.4.b does not control test equipment specially designed for testing:
Memories;
‘Assemblies’ or a class of ‘electronic assemblies’ for home and entertainment applications; and
Electronic components, ‘electronic assemblies’ and integrated circuits not controlled by 3A001 ( 27 ) or X.A.I.001 provided such test equipment does not incorporate computing facilities with ‘user accessible programmability’.
Technical Note: For purposes of X.B.I.002.b.4.b, ‘pattern rate’ is defined as the maximum frequency of digital operation of a tester. It is therefore equivalent to the highest data rate that a tester can provide in non-multiplexed mode. It is also referred to as test speed, maximum digital frequency or maximum digital speed.
Equipment specially designed for determining the performance of focal-plane arrays at wavelengths of more than 1 200 nm, using ‘stored program controlled’ measurements or computer aided evaluation and having any of the following characteristics:
Using scanning light spot diameters of less than 0,12 mm;
Designed for measuring photosensitive performance parameters and for evaluating frequency response, modulation transfer function, uniformity of responsivity or noise; or
Designed for evaluating arrays capable of creating images with more than 32 x 32 line elements;
Electron beam test systems designed for operation at 3 keV or below, or ‘laser’ beam systems, for non-contactive probing of powered-up semiconductor devices having any of the following:
Stroboscopic capability with either beam blanking or detector strobing;
An electron spectrometer for voltage measurements with a resolution of less than 0,5 V; or
Electrical tests fixtures for performance analysis of integrated circuits;
Note: X.B.I.002.b.5 does not control scanning electron microscopes, except when specially designed and instrumented for non-contactive probing of a powered-up semiconductor device.
‘Stored program controlled’ multifunctional focused ion beam systems specially designed for manufacturing, repairing, physical layout analysis and testing of masks or semiconductor devices and having either of the following characteristics:
Target-to-beam position feedback control precision of 1 micrometer or finer; or
Digital-to-analog conversion accuracy exceeding 12 bit;
Particle measuring systems employing ‘lasers’ designed for measuring particle size and concentration in air having both of the following characteristics:
Capable of measuring particle sizes of 0,2 micrometer or less at a flow rate of 0,02832 m3 per minute or more; and
Capable of characterizing Class 10 clean air or better.
Technical Note: For the purpose of X.B.I.002, ‘stored program controlled’ is a control using instructions stored in an electronic storage that a processor can execute in order to direct the performance of predetermined functions. Equipment may be ‘stored program controlled’ whether the electronic storage is internal or external to the equipment.
Positive resists designed for semiconductor lithography specially adjusted (optimised) for use at wavelengths between 370 and 193 nm.
‘Software’ specially designed for the ‘development’, ‘production’, or ‘use’ of electronic devices or components controlled by X.A.I.001, general purpose electronic equipment controlled by X.A.I.002, or manufacturing and test equipment controlled by X.B.I.001 and X.B.I.002; or ‘software’ specially designed for the ‘use’ of equipment controlled by 3B001.g and 3B001.h ( 28 ).
‘Technology’ for the ‘development’, ‘production’ or ‘use’ of electronic devices or components controlled by X.A.I.001, general purpose electronic equipment controlled by X.A.I.002, or manufacturing and test equipment controlled by X.B.I.001 or X.B.I.002, or materials controlled by X.C.I.001.
Category II – Computers
Note: Category II does not control goods for the personal use of the natural persons.
Computers, ‘electronic assemblies’ and related equipment, not controlled by 4A001 or 4A003 ( 29 ), and specially designed components therefor.
Note: The control status of the ‘digital computers’ and related equipment described in X.A.II.001 is determined by the control status of other equipment or systems provided:
The ‘digital computers’ or related equipment are essential for the operation of the other equipment or systems;
The ‘digital computers’ or related equipment are not a ‘principal element’ of the other equipment or systems; and
N.B.1: The control status of ‘signal processing’ or ‘image enhancement’ equipment specially designed for other equipment with functions limited to those required for the other equipment is determined by the control status of the other equipment even if it exceeds the ‘principal element’ criterion.
N.B.2: For the control status of ‘digital computers’ or related equipment for telecommunications equipment, see Category 5, Part 1 (Telecommunications) ( 30 ).
The ‘technology’ for the ‘digital computers’ and related equipment is determined by 4E ( 31 ).
Electronic computers and related equipment, and ‘electronic assemblies’ and specially designed components therefor, rated for operation at an ambient temperature above 343 K (70°C);
‘Digital computers’, including equipment of ‘signal processing’ or ‘image enhancement’, having an ‘Adjusted Peak Performance’ (‘APP’) equal to or greater than 0,0128 Weighted TeraFLOPS (WT);
‘Electronic assemblies’ that are specially designed or modified to enhance performance by aggregation of processors, as follows:
Designed to be capable of aggregation in configurations of 16 or more processors;
Not used;
Note 1: X.A.II.001.c applies only to ‘electronic assemblies’ and programmable interconnections with a ‘APP’ not exceeding the limits in X.A.II.001.b, when shipped as unintegrated ‘electronic assemblies’. It does not apply to ‘electronic assemblies’ inherently limited by nature of their design for use as related equipment controlled by X.A.II.001.k.
Note 2: X.A.II.001.c does not control any ‘electronic assembly’ specially designed for a product or family of products whose maximum configuration does not exceed the limits of X.A.II.001.b.
Not used;
Not used;
Equipment for ‘signal processing’ or ‘image enhancement’ having an ‘Adjusted Peak Performance’ (‘APP’) equal to or greater than 0,0128 Weighted TeraFLOPS WT;
Not used;
Not used;
Equipment containing ‘terminal interface equipment’ exceeding the limits in X.A.III.101;
Technical Note: For the purpose of X.A.II.001.i, ‘terminal interface equipment’ means equipment at which information enters or leaves the telecommunication system, e.g. telephone, data device, computer, etc.
Equipment specially designed to provide external interconnection of ‘digital computers’ or associated equipment that allows communications at data rates exceeding 80 Mbyte/s.
Note: X.A.II.001.j does not control internal interconnection equipment (e.g., backplanes, buses) passive interconnection equipment, ‘network access controllers’ or ‘communication channel controllers’.
Technical Note: For the purpose of X.A.II.001.j, ‘communication channel controllers’ is the physical interface which controls the flow of synchronous or asynchronous digital information. It is an assembly that can be integrated into computer or telecommunications equipment to provide communications access.
‘Hybrid computers’ and ‘electronic assemblies’ and specially designed components therefor containing analog-to-digital converters having all of the following characteristics:
32 channels or more; and
A resolution of 14 bit (plus sign bit) or more with a conversion rate of 200 000 Hz or more.
‘Program’ proof and validation ‘software’, ‘software’ allowing the automatic generation of ‘source codes’, and operating system ‘software’ that are specially designed for ‘real-time processing’ equipment.
‘Program’ proof and validation ‘software’ using mathematical and analytical techniques and designed or modified for ‘programs’ having more than 500 000 ‘source code’ instructions;
‘Software’ allowing the automatic generation of ‘source codes’ from data acquired on line from external sensors described in the Regulation (EU) 2021/821; or
Operating system ‘software’ specially designed for ‘real-time processing’ equipment that guarantees a ‘global interrupt latency time’ of less than 20 microseconds.
Technical Note: For the purpose of X.D.II.001, 'global interrupt latency time' is the time taken by the computer system to recognise an interrupt due to the event, service the interrupt and perform a context switch to an alternate memory-resident task waiting on the interrupt.
‘Technology’ for the ‘development’, ‘production’ or ‘use’ of equipment controlled by X.A.II.001, or ‘software’ controlled by X.D.II.001 or X.D.II.002.
‘Technology’ for the ‘development’ or ‘production’ of equipment designed for 'multi-data-stream processing'.
Technical Note: For the purpose of X.E.II.002, ‘multi-data-stream processing’ is a microprogram or equipment architecture technique that permits simultaneous processing of two or more data sequences under the control of one or more instruction sequences by means such as:
Single Instruction Multiple Data (SIMD) architectures such as vector or array processors;
Multiple Single Instruction Multiple Data (MSIMD) architectures;
Multiple Instruction Multiple Data (MIMD) architectures, including those that are tightly coupled, closely coupled or loosely coupled; or
Structured arrays of processing elements, including systolic arrays.
Category III. Part 1 – Telecommunications
Note: Category III.Part 1 does not control goods for the personal use of the natural persons.
Telecommunication equipment.
Any type of telecommunications equipment, not controlled by 5A001.a ( 34 ), specially designed to operate outside the temperature range from 219 K (-54°C) to 397 K (124°C).
Telecommunication transmission equipment and systems, and specially designed components and accessories therefor, having any of the following characteristics, functions or features:
Note: Telecommunication transmission equipment:
Categorised as follows, or combinations thereof:
Radio equipment (e.g., transmitters, receivers and transceivers);
Line terminating equipment;
Intermediate amplifier equipment;
Repeater equipment;
Regenerator equipment;
Translation encoders (transcoders);
Multiplex equipment (statistical mutiplex included);
Modulators/demodulators (modems);
Transmultiplex equipment (see CCITT Rec. G701);
‘Stored program controlled’ digital cross-connection equipment;
‘Gateways’ and bridges;
‘Media access units’; and
Designed for use in single or multi-channel communication via any of the following:
Wire (line);
Coaxial cable;
Optical fibre cable;
Electromagnetic radiation; or
Underwater acoustic wave propagation.
Employing digital techniques, including digital processing of analog signals, and designed to operate at a ‘digital transfer rate’ at the highest multiplex level exceeding 45 Mbit/s or a ‘total digital transfer rate’ exceeding 90 Mbit/s;
Note: X.A.III.101.b.1 does not control equipment specially designed to be integrated and operated in any satellite system for civil use.
Modems using the ‘bandwidth of one voice channel’ with a ‘data signalling rate’ exceeding 9 600 bits per second;
Being ‘stored program controlled’ digital cross connect equipment with ‘digital transfer rate’ exceeding 8,5 Mbit/s per port.
Being equipment containing any of the following:
"Network access controllers" and their related common medium having a ‘digital transfer rate’ exceeding 33 Mbit/s; or
‘Communication channel controllers’ with a digital output having a ‘data signalling rate’ exceeding 64 000 bit/s per channel;
Note: If any uncontrolled equipment contains a ‘network access controller’, it cannot have any type of telecommunications interface, except those described in, but not controlled by X.A.III.101.b.4.
Employing a ‘laser’ and having any of the following characteristics:
A transmission wavelength exceeding 1 000 nm; or
Employing analog techniques and having a bandwidth exceeding 45 MHz;
Employing coherent optical transmission or coherent optical detection techniques (also called optical heterodyne or homodyne techniques);
Employing wavelength division multiplexing techniques; or
Performing ‘optical amplification’;
Radio equipment operating at input or output frequencies exceeding:
31 GHz for satellite-earth station applications; or
26,5 GHz for other applications;
Note: X.A.III.101.b.6 does not control equipment for civil use when conforming with an International Telecommunications Union (ITU) allocated band between 26,5 GHz and 31 GHz.
Being radio equipment employing any of the following:
Quadrature-amplitude-modulation (QAM) techniques above level 4 if the ‘total digital transfer rate’ exceeds 8,5 Mbit/s;
QAM techniques above level 16 if the ‘total digital transfer rate’ is equal to or less than 8,5 Mbit/s;
Other digital modulation techniques and having a ‘spectral efficiency’ exceeding 3 bit/s/Hz; or
Operating in the 1,5 MHz to 87,5 MHz band and incorporating adaptive techniques providing more than 15 dB suppression of an interfering signal.
Notes:
X.A.III.101.b.7 does not control equipment specially designed to be integrated and operated in any satellite system for civil use.
X.A.III.101.b.7 does not control radio relay equipment for operation in an International Telecommunications Union (ITU) allocated band:
Having any of the following:
Not exceeding 960 MHz; or
With a ‘total digital transfer rate’ not exceeding 8,5 Mbit/s; and
Having a ‘spectral efficiency’ not exceeding 4 bit/s/Hz.
‘Stored program controlled’ switching equipment and related signalling systems, having any of the following characteristics, functions or features, and specially designed components and accessories therefor:
Note: Statistical multiplexers with digital input and digital output which provide switching are treated as 'stored program controlled' switches.
‘Data (message) switching’ equipment or systems designed for ‘packet-mode operation’, electronic assemblies and components therefor, other than those specified in the CML or in Regulation (EU) 2021/821.
Not used;
Routing or switching of ‘datagram’ packets;
Note: X.A.III.101.c.3 does not control networks restricted to using only ‘network access controllers’ or to ‘network access controllers’ themselves.
Not used;
Multi-level priority and pre-emption for circuit switching;
Note: X.A.III.101.c.5 does not control single-level call preemption.
Designed for automatic hand-off of cellular radio calls to other cellular switches or automatic connection to a centralised subscriber data base common to more than one switch;
Containing ‘stored program controlled’ digital cross connect equipment with ‘digital transfer rate’ exceeding 8,5 Mbit/s per port.
‘Common channel signalling’ operating in either non-associated or quasi-associated mode of operation;
‘Dynamic adaptive routing’;
Being packet switches, circuit switches and routers with ports or lines exceeding any of the following:
A ‘data signalling rate’ of 64 000 bit/s per channel for a ‘communications channel controller’; or
Note: X.A.III.101.c.10.a does not control multiplex composite links composed only of communication channels not individually controlled by X.A.III.101.b.1.
A ‘digital transfer rate’ of 33 Mbit/s for a ‘network access controller’ and related common media;
Note: X.A.III.101.c.10 does not control packet switches or routers with ports or lines not exceeding the limits in X.A.III.101.c.10.
‘Optical switching’;
Employing ‘Asynchronous Transfer Mode’ (‘ATM’) techniques.
Optical fibres and optical fibre cables of more than 50 m in length designed for single mode operation;
Centralised network control having all of the following characteristics:
Receives data from the nodes; and
Process these data in order to provide control of traffic not requiring operator decisions, and thereby performing ‘dynamic adaptive routing’;
Note 1: X.A.III.101.e does not include cases of routing decisions taken on predefined information.
Note 2: X.A.III.101.e does not preclude control of traffic as a function of predictable statistical traffic conditions.
Phased array antennas, operating above 10,5 GHz, containing active elements and distributed components, and designed to permit electronic control of beam shaping and pointing, except for landing systems with instruments meeting International Civil Aviation Organization (ICAO) standards (microwave landing systems (MLS)).
Mobile communications equipment other than those specified in the CML or in Regulation (EU) 2021/821, electronic assemblies and components therefor; or
Radio relay communications equipment designed for use at frequencies equal to or exceeding 19,7 GHz and components therefor, other than those specified in the CML or in Regulation (EU) 2021/821.
Technical Note: For the purpose of X.A.III.101:
‘Asynchronous transfer mode’ (‘ATM’) is a transfer mode in which the information is organised into cells; it is asynchronous in the sense that the recurrence of cells depends on the required or instantaneous bit rate.
‘Bandwidth of one voice channel’ is data communication equipment designed to operate in one voice channel of 3 100 Hz, as defined in CCITT Recommendation G.151.
‘Communications channel controller’ is the physical interface that controls the flow of synchronous or asynchronous digital information. It is an assembly that can be integrated into computer or telecommunications equipment to provide communications access.
‘Datagram’ is a self-contained, independent entity of data carrying sufficient information to be routed from the source to the destination data terminal equipment without reliance on earlier exchanges between this source and destination data terminal equipment and the transporting network.
‘Fast select’ is a facility applicable to virtual calls that allows data terminal equipment to expand the possibility to transmit data in call set-up and clearing ‘packets’ beyond the basic capabilities of a virtual call.
‘Gateway’ is the function, realised by any combination of equipment and ‘software’, to carry out the conversion of conventions for representing, processing or communicating information used on one system into the corresponding, but different conventions used in another system.
‘Integrated Services Digital Network’ (ISDN) is a unified end-to-end digital network, in which data originating from all types of communication (e.g., voice, text, data, still and moving pictures) are transmitted from one port (terminal) in the exchange (switch) over one access line to and from the subscriber.
‘Packet’ is a group of binary digits including data and call control signals that is switched as a composite whole. The data, call control signals, and possible error control information are arranged in a specified format.
‘Common channel signalling’ means the transmission of control information (signalling) via a separate channel than that used for the messages. The signalling channel usually controls multiple message channels.
‘Data signalling rate’ means the rate, as defined in ITU Recommendation 53-36, taking into account that, for non-binary modulation, baud and bit per second are not equal. Bits for coding, checking and synchronization functions are to be included.
‘Dynamic adaptive routing’ means Automatic rerouting of traffic based on sensing and analysis of current actual network conditions
‘Media access unit’ means equipment that contains one or more communication interfaces (‘network access controller’, ‘communications channel controller’, modem or computer bus) to connect terminal equipment to a network.
‘Spectral effiency’ is the ‘digital transfer rate’ [bits/s] / 6 dB spectrum bandwidth in Hz.
‘Stored program controlled’ is a control using instructions stored in an electronic storage that a processor can execute in order to direct the performance of predetermined functions. Note: Equipment may be ‘stored program controlled’ whether the electronic storage is internal or external to the equipment.
Telecommunications test equipment, other than those specified in the CML or in Regulation (EU) 2021/821.
Preforms of glass or of any other material optimised for the manufacture of optical fibres controlled by X.A.III.101.
‘Software’ specially designed or modified for the ‘development’, ‘production’ or ‘use’ of equipment controlled by X.A.III.101 and X.B.III.101, and dynamic adaptive routing software as described as follows:
‘Software’, other than in machine-executable form, specially designed for ‘dynamic adaptive routing’.
Not used;
‘Technology’ for the ‘development’, ‘production’ or ‘use’ of equipment controlled by X.A.III.101 or X.B.III.101, or ‘software’ controlled by X.D.III.101, and other ‘technologies’ as follows:
Specific ‘technologies’ as follows:
‘Technology’ for the processing and application of coatings to optical fibre specially designed to make it suitable for underwater use;
‘Technology’ for the ‘development’ of equipment employing ‘Synchronous Digital Hierarchy’ (‘SDH’) or ‘Synchronous Optical Network’ (‘SONET’) techniques.
Technical Note: For the purpose of X.E.III.101:
‘Synchronous digital hierarchy’ (SDH) is a digital hierarchy providing a means to manage, multiplex, and access various forms of digital traffic using a synchronous transmission format on different types of media. The format is based on the Synchronous Transport Module (STM) that is defined by CCITT Recommendation G.703, G.707, G.708, G.709 and others yet to be published. The first level rate of ‘SDH’ is 155,52 Mbits/s.
‘Synchronous optical network’ (SONET) is a network providing a means to manage, multiplex and access various forms of digital traffic using a synchronous transmission format on fibre optics. The format is the North America version of ‘SDH’ and also uses the Synchronous Transport Module (STM). However, it uses the Synchronous Transport Signal (STS) as the basic transport module with a first level rate of 51,81 Mbits/s. The SONET standards are being integrated into those of ‘SDH’.
Category III. Part 2 - Information Security
Note: Category III.Part 2 does not control goods for the personal use of the natural persons.
Equipment as follows:
Not used;
Not used;
Goods classified as mass market encryption in accordance with Cryptography Note – Note 3 to Category 5, Part 2 ( 35 ).
‘Information Security’‘software’ as follows:
Note: This entry does not control ‘software’ designed or modified to protect against malicious computer damage, e.g., viruses, where the use of ‘cryptography’ is limited to authentication, digital signature and/or the decryption of data or files.
Not used;
Not used;
‘Software’ classified as mass market encryption software in accordance with Cryptography Note – Note 3 to Category 5, Part 2 ( 36 ).
‘Information Security’‘technology’ according to the General Technology Note, as follows:
Not used;
‘Technology’, other than specified in the CML or in Regulation (EU) 2021/821, for the ‘use’ of mass market goods controlled by X.A.III.201.c or mass market ‘software’ controlled by X.D.III.201.c.
Category IV – Sensors and Lasers
Marine or terrestrial acoustic equipment, capable of detecting or locating underwater objects or features or positioning surface vessels or underwater vehicles; and specially designed components, other than those specified in the CML or in Regulation (EU) 2021/821.
Optical Sensors as follows:
Image intensifier tubes and specially designed components therefor, as follows:
Image intensifier tubes having all the following:
A peak response in wavelength range exceeding 400 nm, but not exceeding 1 050 nm;
A microchannel plate for electron image amplification with a hole pitch (center-to-center spacing) of less than 25 micrometers; and
Having any of the following:
An S-20, S-25 or multialkali photocathode; or
A GaAs or GaInAs photocathode;
Specially designed microchannel plates having both of the following characteristics:
15 000 or more hollow tubes per plate; and
Hole pitch (center-to-center spacing) of less than 25 micrometers.
Direct view imaging equipment operating in the visible or infrared spectrum, incorporating image intensifier tubes having the characteristics listed in X.A.IV.002.a.1.
Optics as follows:
Optical filters:
For wavelengths longer than 250 nm, comprised of multi-layer optical coatings and having either of the following:
Bandwidths equal to or less than 1 nm Full Width Half Intensity (FWHI) and peak transmission of 90 % or more; or
Bandwidths equal to or less than 0,1 nm FWHI and peak transmission of 50 % or more;
Note: X.A.IV.004 does not control optical filters with fixed air gaps or Lyot-type filters.
For wavelengths longer than 250 nm, and having all of the following:
Tunable over a spectral range of 500 nm or more;
Instantaneous optical bandpass of 1,25 nm or less;
Wavelength resettable within 0,1 ms to an accuracy of 1 nm or better within the tunable spectral range; and
A single peak transmission of 91 % or more;
Optical opacity switches (filters) with a field of view of 30° or wider and a response time equal to or less than 1 ns;
‘Fluoride fibre’ cable, or optical fibres therefor, having an attenuation of less than 4 dB/km in the wavelength range exceeding 1 000 nm but not exceeding 3 000 nm.
Technical Note: For the purpose of X.A.IV.004.b ‘Fluoride fibres’ are fibres manufactured from bulk fluoride compounds.
‘Lasers’ as follows:
Carbon dioxide (CO2) ‘lasers’ having any of the following:
A CW output power exceeding 10 kW;
A pulsed output with a ‘pulse duration’ exceeding 10 μs; and
An average output power exceeding 10 kW; or
A pulsed ‘peak power’ exceeding 100 kW; or
A pulsed output with a ‘pulse duration’ equal to or less than 10 μs; and
A pulse energy exceeding 5 J per pulse and ‘peak power’ exceeding 2,5 kW; or
An average output power exceeding 2,5 kW;
Semiconductor lasers, as follows:
Individual, single-transverse mode semiconductor ‘lasers’ having:
An average output power exceeding 100 mW; or
A wavelength exceeding 1 050 nm;
Individual, multiple-transverse mode semiconductor ‘lasers’, or arrays of individual semiconductor ‘lasers’, having a wavelength exceeding 1 050 nm;
Ruby ‘lasers’ having an output energy exceeding 20 J per pulse;
Non-‘tunable’‘pulsed lasers’ having an output wavelength exceeding 975 nm but not exceeding 1 150 nm and having any of the following:
A ‘pulse duration’ equal to or exceeding 1 ns but not exceeding 1 μs, and having any of the following:
A single transverse mode output and having any of the following:
A ‘wall-plug efficiency’ exceeding 12 % and an ‘average output power’ exceeding 10 W and capable of operating at a pulse repetition frequency greater than 1 kHz; or
An ‘average output power’ exceeding 20 W; or
A multiple transverse mode output and having any of the following:
A ‘wall-plug efficiency’ exceeding 18 % and an ‘average output power’ exceeding 30W;
A ‘peak power’ exceeding 200 MW; or
An ‘average output power’ exceeding 50 W; or
A ‘pulse duration’ exceeding 1 μs and having any of the following:
A single transverse mode output and having any of the following:
A ‘wall-plug efficiency’ exceeding 12 % and an ‘average output power’ exceeding 10 W and capable of operating at a pulse repetition frequency greater than 1 kHz; or
An ‘average output power’ exceeding 20 W; or
A multiple transverse mode output and having any of the following:
A ‘wall-plug efficiency’ exceeding 18 % and an ‘average output power’ exceeding 30 W; or
An ‘average output power’ exceeding 500 W;
Non-‘tunable’ continuous wave ‘(CW) lasers’, having an output wavelength exceeding 975 nm but not exceeding 1 150 nm and having any of the following:
A single transverse mode output and having any of the following:
A ‘wall-plug efficiency’ exceeding 12 % and an ‘average output power’ exceeding 10 W and capable of operating at a pulse repetition frequency greater than 1 kHz; or
An ‘average output power’ exceeding 50 W; or
A multiple transverse mode output and having any of the following:
A ‘wall-plug efficiency’ exceeding 18 % and an ‘average output power’ exceeding 30 W; or
An ‘average output power’ exceeding 500 W;
Note: X.A.IV.005.e.2.b does not control multiple transverse mode, industrial ‘lasers’ with output power less than or equal to 2 kW with a total mass greater than 1 200 kg. For the purpose of this note, total mass includes all components required to operate the ‘laser’, e.g., ‘laser’, power supply, heat exchanger, but excludes external optics for beam conditioning and/or delivery.
Non-‘tunable’‘lasers’, having a wavelength exceeding 1 400 nm, but not exceeding 1 555 nm and having any of the following:
An output energy exceeding 100 mJ per pulse and a pulsed ‘peak power’ exceeding 1 W; or
An average or CW output power exceeding 1 W;
Free electron ‘lasers’.
Technical Note: For the purpose of X.A.IV.005 ‘Wall-plug efficiency’ is defined as the ratio of "laser" output power (or "average output power") to total electrical input power required to operate the "laser", including the power supply/conditioning and thermal conditioning/heat exchanger.
‘Magnetometers’, ‘Superconductive’ electromagnetic sensors, and specially designed components therefor, as follows:
‘Magnetometers’, other than those specified in the CML or in Regulation (EU) 2021/821, having a ‘sensitivity’ lower (better) than 1,0 nT (rms) per square root Hz.
Technical Note: For the purposes of X.A.IV.006.a, ‘sensitivity’ (noise level) is the root mean square of the device-limited noise floor which is the lowest signal that can be measured.
‘Superconductive’ electromagnetic sensors, components manufactured from ‘superconductive’ materials:
Designed for operation at temperatures below the ‘critical temperature’ of at least one of their ‘superconductive’ constituents (including Josephson effect devices or ‘superconductive’ quantum interference devices (SQUIDS));
Designed for sensing electromagnetic field variations at frequencies of 1 KHz or less; and
Having any of the following characteristics:
Incorporating thin-film SQUIDS with a minimum feature size of less than 2 μm and with associated input and output coupling circuits;
Designed to operate with a magnetic field slew rate exceeding 1 x 106 magnetic flux quanta per second;
Designed to function without magnetic shielding in the earth’s ambient magnetic field; or
Having a temperature coefficient less (smaller) than 0,1 magnetic flux quantum/K.
Gravity meters (gravimeters) for ground use, other than those specified in the CML or in Regulation (EU) 2021/821, as follows:
Having a static accuracy of less (better) than 100 μGal; or
Being of the quartz element (Worden) type.
Radar systems, equipment and major components, other than those specified in the CML or in Regulation (EU) 2021/821, and specially designed components therefor, as follows:
Airborne radar equipment, other than those specified in the CML or in Regulation (EU) 2021/821, and specially designed components therefor.
‘Space-qualified’‘laser’ radar or Light Detection and Ranging (LIDAR) equipment specially designed for surveying or for meteorological observation.
Millimeter wave enhanced vision radar imaging systems specially designed for rotary wing aircraft and having all of the following:
Operates at a frequency of 94 GHz;
An average output power of less than 20 mW;
Radar beam width of 1 degree; and
Operating range equal to or greater than 1 500 m.
Specific processing equipment, as follows:
Seismic detection equipment not controlled by X.A.IV.009.c.
Radiation hardened TV cameras, other than those specified in the CML or in Regulation (EU) 2021/821.
Seismic intrusion detection systems that detect, classify and determine the bearing on the source of a detected signal.
Equipment, including tools, dies, fixtures or gauges, and other specially designed components and accessories therefor, specially designed or modified for any of the following:
For the manufacture or inspection of:
Free electron ‘laser’ magnet wigglers;
Free electron ‘laser’ photo injectors;
For the adjustment, to required tolerances, of the longitudinal magnetic field of free electron ‘lasers’.
Optical sensing fibres that are modified structurally to have a ‘beat length’ of less than 500 mm (high birefringence) or optical sensor materials not described in 6C002.b ( 38 ) and having a zinc content of equal to or more than 6 % by ‘mole fraction.’
Technical Note: For the purpose of X.C.IV.001:
‘Mole fraction’ is defined as the ratio of moles of ZnTe to the sum of the moles of CdTe and ZnTe present in the crystal.
‘Beat length’ is the distance over which two orthogonally polarised signals, initially in phase, must pass in order to achieve a 2 Pi radian(s) phase difference.
Optical materials, as follows:
Low optical absorption materials, as follows:
Bulk fluoride compounds containing ingredients with a purity of 99,999 % or better; or
Note: X.C.IV.002.a.1 controls fluorides of zirconium or aluminum and variants.
Bulk fluoride glass made from compounds controlled by 6C004.e.1 ( 39 );
‘Optical fibre preforms’ made from bulk fluoride compounds containing ingredients with a purity of 99,999 % or better, ‘specially designed’ for the manufacture of ‘fluoride fibres’ controlled by X.A.IV.004.b.
Technical Note: For the purpose of X.C.IV.002:
‘Fluoride fibres’ are fibres manufactured from bulk fluoride compounds.
‘Optical fibre preforms’ are bars, ingots, or rods of glass, plastic or other materials that have been specially processed for use in fabricating optical fibres. The characteristics of the preform determine the basic parameters of the resultant drawn optical fibres.
‘Software’, other than those specified in the CML or in Regulation (EU) 2021/821, specially designed for the ‘development’, ‘production’, or ‘use’ of goods controlled by 6A002, 6A003 ( 40 ), X.A.IV.001, X.A.IV.006, X.A.IV.007, or X.A.IV.008.
‘Software’ specially designed for the ‘development’ or ‘production’ of equipment controlled by X.A.IV.002, X.A.IV.004, or X.A.IV.005.
Other ‘software’, as follows:
Air Traffic Control (ATC) ‘software’ application ‘programs’ hosted on general purpose computers located at Air Traffic Control centers, and capable of automatically handing over primary radar target data (if not correlated with secondary surveillance radar (SSR) data) from the host ATC center to another ATC center.
‘Software’ specially designed for seismic intrusion detection systems in X.A.IV.009.c.
‘Source Code’ specially designed for seismic intrusion detection systems in X.A.IV.009.c.
‘Technology’ for the ‘development’, ‘production’ or ‘use’ of equipment controlled by X.A.IV.001, X.A.IV.006, X.A.IV.007, X.A.IV.008 or X.A.IV.009.c.
‘Technology’ for the ‘development’ or ‘production’ of equipment, materials or ‘software’ controlled by X.A.IV.002, X.A.IV.004, or X.A.IV.005, X.B.IV.001, X.C.IV.001, X.C.IV.002, or X.D.IV.003.
Other ‘technology’ as follows:
Optical fabrication technologies for serially producing optical components at a rate exceeding 10 m2 of surface area per year on any single spindle and having all of the following:
Area exceeding 1 m2; and
Surface figure exceeding λ/10 (rms) at the designed wavelength;
‘Technology’ for optical filters with a bandwidth equal to or less than 10 nm, a field of view (FOV) exceeding 40° and a resolution exceeding 0,75 line pairs per milliradian;
‘Technology’ for the ‘development’ or ‘production’ of cameras controlled by X.A.IV.003;
‘Technology’ required for the ‘development’ or ‘production’ of non-triaxial fluxgate ‘magnetometers’ or non-triaxial fluxgate ‘magnetometer’ systems, having any of the following:
‘Sensitivity’ lower (better) than 0,05 nT (rms) per square root Hz at frequencies of less than 1 Hz; or
‘Sensitivity’ lower (better) than 1 x 10-3 nT (rms) per square root Hz at frequencies of 1 Hz or more.
‘Technology’ required for the ‘development’ or ‘production’ of infrared up-conversion devices having all of the following:
A response in the wavelength range exceeding 700 nm but not exceeding 1 500 nm; and
A combination of an infrared photodetector, light emitting diode (OLED), and nanocrystal to convert infrared light into visible light.
Technical Note: For the purposes of X.E.IV.003, ‘sensitivity’ (or noise level) is the root mean square of the device-limited noise floor which is the lowest signal that can be measured.
Category V – Navigation and Avionics
Airborne communication equipment, all "aircraft" inertial navigation systems, and other avionic equipment, including components, other than those specified in the CML or in Regulation (EU) 2021/821.
Note 1: X.A.V.001. does not control headsets or microphones.
Note 2: X.A.V.001. does not control goods for the personal use of the natural persons.
Other equipment specially designed for the test, inspection, or ‘production’ of navigation and avionics equipment.
‘Software’, other than specified in the CML or in Regulation (EU) 2021/821, for the ‘development’, ‘production’, or ‘use’ of navigation, airborne communication and other avionics.
‘Technology’, other than specified in the CML or in Regulation (EU) 2021/821, for the ‘development’, ‘production’ or ‘use’ of navigation, airborne communication, and other avionics equipment.
Category VI – Marine
Vessels, marine systems or equipment, and specially designed components therefor, components and accessories as follows:
Underwater vision systems, as follows:
Television systems (comprising camera, lights, monitoring and signal transmission equipment) having a limiting resolution when measured in air of more than 500 lines and specially designed or modified for remote operation with a submersible vehicle; or
Underwater television cameras having a limiting resolution when measured in air of more than 700 lines;
Technical Note: Limiting resolution in television is a measure of horizontal resolution usually expressed in terms of the maximum number of lines per picture height discriminated on a test chart, using IEEE Standard 208/1960 or any equivalent standard.
Photographic still cameras specially designed or modified for underwater use, having a film format of 35 mm or larger, and having autofocusing or remote focusing ‘specially designed’ for underwater use;
Stroboscopic light systems, specially designed or modified for underwater use, capable of a light output energy of more than 300 J per flash;
Other underwater camera equipment, other than those specified in the CML or in Regulation (EU) 2021/821;
Not used;
Vessels (surface or underwater), including inflatable boats, and specially designed components therefor, other than those specified in the CML or in Regulation (EU) 2021/821;
Note: X.A.VI.001.f does not control vessels on temporary sojourn, used for private transport or for the transport of passengers or goods from or through the customs territory of the Union.
Marine engines (both inboard and outboard) and submarine engines and specially designed components therefor, other than those specified in the CML or in Regulation (EU) 2021/821;
Self-contained underwater breathing apparatus (scuba gear) and accessories therefor, other than those specified in the CML or in Regulation (EU) 2021/821;
Life jackets, inflation cartridges, dive compasses and dive computers;
Note: X.A.VI.001.i does not control goods for the personal use of the natural persons.
Underwater lights and propulsion equipment;
Note: X.A.VI.001.j does not control goods for the personal use of the natural persons.
Air compressors and filtration system specially designed for filling air cylinders;
‘Software’ specially designed or modified for the ‘development’, ‘production’ or ‘use’ of equipment controlled by X.A.VI.001.
‘Software’ specially designed for the operation of unmanned submersible vehicles used in the oil and gas industry.
‘Technology’ for the ‘development’, ‘production’ or ‘use’ of equipment controlled by X.A.VI.001.
Category VII – Aerospace and Propulsion
Diesel engines, and tractors and specially designed components therefor, other than those specified in the CML or in Regulation (EU) 2021/821:
Diesel engines, other than those specified in the CML or in Regulation (EU) 2021/821, for trucks, tractors, and automotive applications, having an overall power output of 298kW or more.
Off highway wheel tractors of carriage capacity 9 t or more; and major components and accessories, other than those specified in the CML or in Regulation (EU) 2021/821.
Road tractors for semi-trailers, with single or tandem rear axles rated for 9 t per axel or more and specially designed major components.
Note: X.A.VII.001.b and X.A.VII.001.c do not control vehicles on temporary sojourn, used for private transport or for the transport of passengers or goods from or through the customs territory of the Union.
Gas turbine engines and components, other than those specified in the CML or in Regulation (EU) 2021/821.
Not used.
Not used.
Aero gas turbine engines and components specially designed therefor.
Note: X.A.VII.002.c does not control aero gas turbine engines that are destined for use in civil ‘aircraft’ and that have been in use in bona fide civil ‘aircraft’ for more than eight years. If they have been in use in bona fide civil ‘aircraft’ for more than eight years, see ANNEX XI.
Not used.
Pressurised aircraft breathing equipment components specially designed therefor, other than those specified in the CML or in Regulation (EU) 2021/821.
Vibration test equipment and specially designed components, other than those specified in the CML or in Regulation (EU) 2021/821.
Note: X.B.VII.001. controls only equipment for the ‘development’ or ‘production’. It does not control condition monitoring systems.
Specially designed ‘equipment’, tooling or fixtures for manufacturing or measuring gas turbine blades, vanes or tip shroud castings, as follows:
Automated equipment using non-mechanical methods for measuring airfoil wall thickness;
Tooling, fixtures or measuring equipment for the ‘laser’, water jet or ECM/EDM hole drilling processes controlled by 9E003.c ( 41 );
Ceramic core leaching equipment;
Ceramic core manufacturing equipment or tools;
Ceramic shell wax pattern preparation equipment;
Ceramic shell burn out or firing equipment.
‘Software’, other than those specified in the CML or in Regulation (EU) 2021/821, for the ‘development’ or ‘production’ of equipment controlled by X.A.VII.001 or X.B.VII.001.
‘Software’, for the ‘development’ or ‘production’ of equipment controlled by X.A.VII.002 or X.B.VII.002.
‘Technology’, other than those specified in the CML or in Regulation (EU) 2021/821, for the ‘development’ or ‘production’ or ‘use’ of equipment controlled by X.A.VII.001 or X.B.VII.001.
‘Technology’, for the ‘development’, ‘production’ or ‘use’ of equipment controlled by X.A.VII.002 or X.B.VII.002.
Other ‘technology’, not described by 9E003 ( 42 ), as follows:
Rotor blade tip clearance control systems employing active compensating casing ‘technology’ limited to a design and development data base; or
Gas bearing for turbine engine rotor assemblies.
Category VIII – Miscellaneous items
Equipment for oil production or oil exploration as follows:
Drill head integrated measurement equipment, including inertial navigation systems for measurement while drilling (MWD);
Gas monitoring systems and detectors therefor, designed for continuous operation and detection of hydrogen sulphide;
Equipment for seismological measurements, including reflection seismetics and seismic vibrators;
Sediment echo sounders.
Equipment, ‘electronic assemblies’ and components, specially designed for quantum computers, quantum electronics, quantum sensors, quantum processing units, qubit circuits, qubit devices or quantum radar systems, including pockels cells.
Note 1: quantum computers perform computations that harness the collective properties of quantum states, such as superposition, interference and entanglement.
Note 2: Units, circuits and devices include but are not limited to superconducting circuits, Quantum annealing, Ion Trap, photonic interaction, silicon/spin, cold atoms.
Microscopes, related equipment and detectors as follows:
Scanning electron microscopes (SEM);
Scanning auger microscopes;
Transmission electron microscopes (TEM);
Atomic force microscopes (AFM);
Scanning force microscopes (SFM);
Equipment and detectors, specially designed for use with the microscopes specified in X.A.VIII.003.a to X.A.VIII.0003.e, employing any of the following material analysis techniques:
X-ray photo spectroscopy (XPS);
Energy-dispersive X-ray spectroscopy (EDX, EDS) or
Electron spectroscopy for chemical analysis (ESCA).
Collector equipment for metal ores in deep seabed.
Manufacturing equipment and machine tools as follows:
Additive manufacturing equipment for the ‘production’ of metal parts;
Note: X.A.VIII.005.a only applies to the following systems:
Powder-bed systems using selective laser melting (SLM), laser cusing, direct metal laser sintering (DMLS) or electron beam melting (EBM), or
Powder-fed systems using laser cladding, direct energy deposition or laser metal deposition.
Additive manufacturing equipment for ‘energetic materials’, including equipment using ultrasonic extrusion;
Vat photopolymerization (VVP) additive manufacturing equipment using stereo lithography (SLA) or digital light processing (DLP).
Equipment for the ‘production’ of printed electronics for organic light emitting diodes (OLED), organic field-effect transistors (OFET) or organic photovoltaic cells (OPVC).
Equipment for the ‘production’ of microelectromechanical systems (MEMS) using the mechanical properties of silicon, including sensors in chip format like pressure membranes, bending beams or micro adjustment devices.
Equipment, specially designed for the production of E-Fuels (electrofuels and synthetic fuels) or ultra efficient solar cells (efficiency > 30 %).
Equipment for Ultra-High-Vacuum (UHV) as follows:
UHV pumps (sublimation, turbomolecular, diffusion, cryogenic, ion getter);
UHV pressure gauges.
Note: UHV means 100 nanoPascals (nPa) or lower.
‘Cryogenic refrigeration systems’ designed to maintain temperatures below 1,1 K for 48 hrs or more and related cryogenic refrigeration equipment as follows:
Pulse Tubes;
Cryostats;
Dewars;
Gas Handling System (GHS);
Compressors;
Control Units.
Note: ‘Cryogenic refrigeration systems’ include but are not limited to Dilution Refrigeration, Adiabatic Demagnisation Refrigerators and Laser Cooling Systems.
‘Decapsulation’ equipment for semiconductor devices.
Note: ‘Decapsulation’ is the removal of a cap, lid, or encapsulating material from a packaged integrated circuit by mechanical, thermal, or chemical means.
High Quantum Efficiency (QE) photodetectors with a QE greater than 80 % in the wavelength range exceeding 400 nm but not exceeding 1 600 nm.
Numerical controlled machine tools, having one or more linear axis with a travel length greater than 8 000 mm.
Water cannon systems for riot or crowd control, and components specially designed therefor.
Note: X.A.VIII.014 water cannon systems include, for example: vehicles or fixed stations equipped with remotely operated water cannon that are designed to protect the operator from an outside riot with features such as armor, shatter resistant windows, metal screens, bull-bars, or run-flat tires. Components specially designed for water cannons may include, for example: deck gun water nozzles, pumps, reservoirs, cameras, and lights that are hardened or shielded against projectiles, elevating masts for those items, and teleoperation systems for those items.
Law enforcement striking weapons, including saps, police batons, side handle batons, tonfas, sjamboks, and whips.
Police helmets and shields; and specially designed components, other than those specified in the CML or in Regulation (EU) 2021/821.
Law enforcement restraint devices, including leg irons, shackles, and handcuffs; straight jackets; stun cuffs; shock belts; shock sleeves; multipoint restraint devices such as restraint chairs; and specially designed components and accessories, other than those specified in the CML or in Regulation (EU) 2021/821.
Note: X.A.VIII.017 applies to restraint devices used in law enforcement activities. It does not apply to medical devices that are equipped to restrain patient movement during medical procedures. It does not apply to devices that confine memory impaired patients to appropriate medical facilities. It does not apply to safety equipment such as safety belts or child automobile safety seats.
Oil and gas exploration equipment, software, and data, as follows (see List of Items Controlled):
Not used.
Hydraulic fracturing items, as follows:
Hydraulic fracturing design and analysis software and data;
Hydraulic fracturing ‘proppant’, ‘fracking fluid’, and chemical additives therefor; or
High pressure pumps.
Technical Note:
A ‘proppant’ is a solid material, typically treated sand or man-made ceramic materials, designed to keep an induced hydraulic fracture open, during or following a fracturing treatment. It is added to a ‘fracking fluid’ which may vary in composition depending on the type of fracturing used, and can be gel, foam or slickwater-based.
Specific processing equipment, as follows (see List of Items Controlled):
Ring Magnets;
Not used.
Weapons and devices designed for the purpose of riot control or self-protection, as follows:
Portable electric discharge weapons that can target only one individual each time an electric shock is administered, including but not limited to electric shock batons, electric shock shields, stun guns and electric shock dart guns;
Kits containing all essential components for assembly of portable electric discharge weapons controlled by item X.A.VIII.020.a; or
Note: The following goods are considered to be essential components:
The unit producing an electric shock;
The switch, whether or not on a remote control; and
The electrodes or, where applicable, the wires through which the electrical shock is to be administered.
Fixed or mountable electric discharge weapons that cover a wide area and can target multiple individuals with electrical shocks.
Weapons and equipment disseminating incapacitating or irritating chemical substances for the purpose of riot control or self-protection and certain related substances, as follows:
Portable weapons and equipment which either administer a dose of an incapacitating or irritating chemical substance that targets one individual or disseminate a dose of such substance affecting a small area, e.g. in the form of a spray fog or cloud, when the chemical substance is administered or disseminated;
Note 1: This item does not control equipment controlled by item ML7(e) of the CML of the European Union.
Note 2: This item does not control individual portable equipment, even if containing a chemical substance, when accompanying their user for the user's own personal protection.
Note 3: In addition to relevant chemical substances, such as riot control agents or PAVA, the goods controlled by items X.A.VIII.021.c and X.A.VIII.021.d shall be deemed to be incapacitating or irritating chemical substances.
Pelargonic acid vanillylamide (PAVA) (CAS 2444-46-4);
Oleoresin capsicum (OC) (CAS 8023-77-6);
Mixtures containing at least 0,3 % by weight of PAVA or OC and a solvent (such as ethanol, 1-propanol or hexane), which could be administered as such as incapacitating or irritating agents, in particular in aerosols and in liquid form, or used for manufacturing of incapacitating or irritating agents;
Note 1: This item does not control sauces and preparations therefor, soups or preparations therefor and mixed condiments or seasonings, provided that PAVA or OC is not the only constituent flavour in them.
Note 2: This item does not control medicinal products for which a marketing authorisation has been granted in accordance with Union law.
Fixed equipment for the dissemination of incapacitating or irritating chemical substances, which can be attached to a wall or to a ceiling inside a building, comprises a canister of irritating or incapacitating chemical agents and is activated using a remote control system; or
Note: In addition to relevant chemical substances, such as riot control agents or PAVA, the goods controlled by items X.A.VIII.021.c and X.A.VIII.021.d shall be deemed to be incapacitating or irritating chemical substances
Fixed or mountable equipment for the dissemination of incapacitating or irritating chemical agents that covers a wide area and is not designed to be attached to a wall or to a ceiling inside a building.
Note 1: This item does not control equipment controlled by item ML7(e) of the CML of the European Union.
Note 2: In addition to relevant chemical substances, such as riot control agents or PAVA, the goods controlled by items X.A.VIII.021.c and X.A.VIII.021.d shall be deemed to be incapacitating or irritating chemical substances.
Products which could be used for the execution of human beings by means of lethal injection, as follows:
Short and intermediate acting barbiturate anaesthetic agents including, but not limited to:
Amobarbital (CAS 57-43-2);
Amobarbital sodium salt (CAS 64-43-7);
Pentobarbital (CAS 76-74-4);
Pentobarbital sodium salt (CAS 57-33-0);
Secobarbital (CAS 76-73-3);
Secobarbital sodium salt (CAS 309-43-3);
Thiopental (CAS 76-75-5); or
Thiopental sodium salt (CAS 71-73-8), also known as thiopentone sodium;
Products containing one of the anaesthetic agents listed under X.A.VIII.022.a.
Specific processing equipment, as follows (see List of Items Controlled):
Hot cells; or
Glove boxes suitable for use with radioactive materials.
Metal powders and metal alloy powders, usable for any of the systems listed in X.A.VIII.005.a.
Advanced materials as follows:
Materials for cloaking or adaptive camouflage;
Metamaterials, e.g. with a negative refractive index;
Not used;
High entropy alloys (HEA);
Heusler compounds;
Kitaev materials, including kitaev spin liquids.
Conjugated polymers (conductive, semiconductive, electroluminescent) for printed or organic electronics.
Energetic materials as follows and mixtures thereof:
Ammonium picrate (CAS 131-74-8);
Black powder;
Hexanitrodiphenylamine (CAS 131-73-7);
Difluoroamine(CAS 10405-27-3);
Nitrostarch (CAS9056-38-6);
Not used;
Tetranitronaphthalene;
Trinitroanisole;
Trinitronaphthalene;
Trinitroxylene;
N-pyrrolidinone; 1-methyl-2-pyrrolidinone (CAS 872-50-4);
Dioctylmaleate (CAS 142-16-5);
Ethylhexylacrylate (CAS 103-11-7);
Triethylaluminium (TEA) (CAS 97-93-8), trimethylaluminium (TMA) (CAS 75-24-1), and other pyrophoric metal alkyls and aryls of lithium, sodium, magnesium, zinc or boron;
Nitrocellulose (CAS 9004-70-0);
Nitroglycerin (or glyceroltrinitrate, trinitroglycerine) (NG) (CAS 55-63-0);
2,4,6-trinitrotoluene (TNT) (CAS 118-96-7);
Ethylenediaminedinitrate (EDDN) (CAS 20829-66-7);
Pentaerythritoltetranitrate (PETN) (CAS 78-11-5);
Lead azide (CAS 13424-46-9), normal lead styphnate(CAS 15245-44-0) and basic lead styphnate (CAS 12403-82-6), and primary explosives or priming compositions containing azides or azide complexes;
Not used;
Not used;
Diethyldiphenylurea (CAS 85-98-3); dimethyldiphenylurea(CAS 611-92-7); methylethyldiphenyl urea.
N,N-diphenylurea (unsymmetrical diphenylurea) (CAS 603-54-3);
Methyl-N,N-diphenylurea (methyl unsymmetrical diphenylurea)(CAS 13114-72-2);
Ethyl-N,N-diphenylurea (ethyl unsymmetrical diphenylurea) (CAS 64544-71-4);
Not used;
4-Nitrodiphenylamine (4-NDPA)(CAS 836-30-6);
2,2-dinitropropanol (CAS 918-52-5);
Not used.
Software, specially designed for the ‘development’, ‘production’ or ‘use’ of equipment specified in X.A.VIII.005 to X.A.VIII.0013.
Software, specially designed for the ‘development’, ‘production’ or ‘use’ of equipment, ‘electronic assemblies’ or components specified in X.A.VIII.002.
Software for digital twins of additive manufacturing products or for the determination of the reliability of additive manufacturing products.
‘Software’ specially designed for the ‘development,’‘production’ or ‘use’ of commodities controlled by X.A.VIII.014.
Specific software, as follows (see List of Items Controlled):
Software for neutronic calculations/modeling;
Software for radiation transport calculations/modeling; or
Software for hydrodynamic calculations/modeling.
Technology for the ‘development’, ‘production’ or ‘use’ of equipment specified in X.A.VIII.001 to X.A.VIII.0013.
Technology for the ‘development’, ‘production’ or ‘use’ of materials specified in X.C.VIII.002 or X.C.VIII.003
Technology for digital twins of additive manufacturing products, for the determination of the reliability of additive manufacturing products or for software specified in X.D.VIII.003.
Technology for the ‘development’, ‘production’ or ‘use’ of software specified in X.D.VIII.001 to X.D.VIII.002.
‘Technology’‘required’ for the ‘development’ or ‘production’ of commodities controlled by X.A.VIII.014.
‘Technology’ exclusively for the ‘development’ or ‘production’ of equipment controlled by X.A.VIII.017.
Category IX – Special Materials and Related Equipment
Chemical agents, including tear gas formulation containing 1 % or less of orthochlorobenzalmalononitrile (CS), or 1 % or less of chloroacetophenone (CN), except in individual containers with a net weight of 20 g or less; liquid pepper except when packaged in individual containers with a net weight of 85,05 g or less; smoke bombs; non-irritant smoke flares, canisters, grenades and charges; and other pyrotechnic articles having dual military and commercial use, and components specially designed therefor, other than those specified in the CML or in Regulation (EU) 2021/821.
Fingerprinting powders, dyes, and inks.
Protective and detection equipment not specially designed for military use and not controlled by 1A004 or 2B351, as follows (see List of Items Controlled), and components not specially designed for military use and not controlled by 1A004 or 2B351 therefor:
Personal radiation monitoring dosimeters; or
Equipment limited by design or function to protect against hazards specific to civil industries, such as mining, quarrying, agriculture, pharmaceuticals, medical, veterinary, environmental, waste management, or to the food industry.
Note: X.A.IX.003 does not control items for protection against chemical or biological agents that are consumer goods, packaged for retail sale or personal use, or medical products, such as latex exam gloves, latex surgical gloves, liquid disinfectant soap, disposable surgical drapes, surgical gowns, surgical foot covers, and surgical masks.
Specific processing equipment, other than those specified in the CML or in Regulation (EU) 2021/821, as follows (see List of Items Controlled):
Radiation detection, monitoring and measurement equipment, other than those specified in the CML or in Regulation (EU) 2021/821; or
Radiographic detection equipment such as X-ray converters, and storage phosphor image plates.
Specific processing equipment, other than those specified in the CML or in Regulation (EU) 2021/821, as follows (see List of Items Controlled):
Electrolytic cells for fluorine production, other than those specified in the CML or in Regulation (EU) 2021/821;
Particle accelerators;
Industrial process control hardware/systems designed for power industries, other than those specified in the CML or in Regulation (EU) 2021/821; or
Equipment for the production of structural composites, fibres, prepregs and preforms.
Separate chemically defined compounds according to Note 1 to Chapters 28 and 29 of the Combined Nomenclature:
In concentrations of 95 % weight or greater, as follows:
Ethylene dichloride (CAS 107-06-2);
Nitromethane (CAS 75-52-5);
Picric acid (CAS 88-89-1);
Aluminium chloride (CAS 7446-70-0);
Arsenic (CAS 7440-38-2);
Arsenic trioxide (CAS 1327-53-3);
Bis(2-chloroethyl)ethylamine hydrochloride (CAS 3590-07-6);
Bis(2-chloroethyl)methylamine hydrochloride (CAS 55-86-7);
Tris(2-chloroethyl)amine hydrochloride (CAS 817-09-4);
Tributylphosphite (CAS 102-85-2);
Isocyanatomethane (CAS 624-83-9);
Quinaldine (CAS 91-63-4);
2-bromochloroethane (CAS 107-04-0);
Benzil (CAS 134-81-6);
Diethyl ether (CAS 60-29-7);
Dimethyl ether (CAS 115-10-6);
Dimethylaminoethanol (CAS 108-01-0);
2-methoxyethanol (CAS 109-86-4);
Butyrylcholinesterase (BCHE);
Diethylenetriamine (CAS 111-40-0);
Dichloromethane (CAS 75-09-2);
Dimethylaniline (CAS 121-69-7);
Ethyl bromide (CAS 74-96-4);
Ethyl chloride (CAS 75-00-3);
Ethylamine (CAS 75-04-7);
Hexamine (CAS 100-97-0);
Isopropanol (CAS 67- 63-0);
Isopropyl bromide (CAS 75-26-3);
Isopropyl ether (CAS 108-20-3);
Methylamine (CAS 74-89-5);
Methyl bromide (CAS 74-83-9);
Monoisopropylamine (CAS 75-31-0);
Obidoxime chloride (CAS 114-90-9);
Potassium bromide (CAS 7758-02-3);
Pyridine (CAS 110-86-1);
Pyridostigmine bromide (CAS 101-26-8);
Sodium bromide (CAS 7647-15-6);
Sodium metal (CAS 7440-23-5);
Tributylamine (CAS 102-82-9);
Triethylamine (CAS 121-44-8); or
Trimethylamine (CAS 75-50-3).
In concentrations of 90 % weight or greater, as follows:
Acetone (CAS 67-64-1);
Acetylene (CAS 74-86-2);
Ammonia (CAS 7664-41-7);
Antimony (CAS 7440-36-0);
Benzaldehyde (CAS 100-52-7);
Benzoin (CAS 119-53-9);
1-Butanol (CAS 71-36-3);
2-Butanol (CAS 78-92-2);
Iso-Butanol (CAS 78-83-1);
Tert-Butanol (CAS 75-65-0);
Calcium carbide (CAS 75-20-7);
Carbon monoxide (CAS 630-08-0);
Chlorine (CAS 7782-50-5);
Cyclohexanol (CAS 108-93-0);
Dicyclohexylamine (CAS 101-83-7);
Ethanol (CAS 64-17-5);
Ethylene (CAS 74-85-1);
Ethylene oxide (CAS 75-21-8);
Fluoroapatite (CAS 1306-05-4);
Hydrogen chloride (CAS 7647-01-0);
Hydrogen sulfide (CAS 7783-06-4);
Mandelic acid (CAS 90-64-2);
Methanol (CAS 67-56-1);
Methyl chloride (CAS 74-87-3);
Methyl iodide (CAS 74-88-4);
Methyl mercaptan (CAS 74-93-1);
Monoethyleneglycol (CAS 107-21-1);
Oxalyl chloride (CAS 79-37-8);
Potassium sulphide (CAS 1312-73-8);
Potassium thiocyanate (CAS 333-20-0);
Sodium hypochlorite (CAS 7681-52-9);
Sulphur (CAS 7704-34-9);
Sulphur dioxide (CAS 7446-09-5);
Sulphur trioxide (CAS 7446-11-9);
Thiophosphoryl chloride (CAS 3982-91-0);
Tri-isobutyl phosphite (CAS 1606-96-8);
White phosphorus (CAS 12185-10-3); or
Yellow phosphorus (CAS 7723-14-0);
Mercury (CAS 7439-97-6);
Barium chloride (CAS 10361-37-2);
Sulphuric acid (CAS 7664-93-9);
3,3-dimethyl-1-butene (CAS 558-37-2);
2,2-dimethylpropanal (CAS 630-19-3);
2,2-dimethylpropylchloride (CAS 753-89-9);
2-methylbutene (CAS 26760-64-5);
2-chloro-3-methylbutane (CAS 631-65-2);
2,3-dimethyl-2,3-butanediol (CAS 76-09-5);
2-methyl-2-butene (CAS 513-35-9);
Butyl lithium (CAS 109-72-8);
Bromo(methyl)magnesium (CAS 75-16-1);
Formaldehyde (CAS 50-00-0);
Diethanolamine (CAS 111-42-2);
Dimethylcarbonate (CAS 616-38-6);
Methyldiethanolamine hydrochloride (CAS 54060-15-0);
Diethylamine hydrochloride (CAS 660-68-4);
Diisopropylamine hydrochloride (CAS 819-79-4);
3-Quinuclidinone hydrochloride (CAS 1193-65-3);
3-Quinuclidinol hydrochloride (CAS 6238-13-7);
(R)-3- Quinuclidinol hydrochloride (CAS 42437-96-7); or
N,N-Diethylaminoethanol hydrochloride (CAS 14426-20-1).
Fentanyl and its derivatives Alfentanil, Sufentanil, Remifentanil, Carfentanil, and salts thereof.
Note:
X.C.IX.002 does not control products identified as consumer goods packaged for retail sale for personal use or packaged for individual use.
Chemical precursors to Central Nervous System Acting Chemicals, as follows:
4-anilino-N-phenethylpiperidine (CAS 21409-26-7); or
N-phenethyl-4-piperidone (CAS 39742-60-4).
Notes:
1. X.C.IX.003 does not control "chemical mixtures" containing one or more of the chemicals specified in entry X.C.IX.003 in which no individually specified chemical constitutes more than 1 % by the weight of the mixture.
2. X.C.IX.003 does not control products identified as consumer goods packaged for retail sale for personal use or packaged for individual use.
Fibrous and filamentary materials, not controlled by 1C010 or 1C210, for use in ‘composite’ structures and with a specific modulus of 3,18 x 106 m or greater and a specific tensile strength of 7,62 x 104 m or greater.
‘Vaccines’, ‘immunotoxins’, ‘medical products’, ‘diagnostic and food testing kits’, as follows (see List of Items controlled):
‘Vaccines’ containing, or designed for use against, items controlled by 1C351, 1C353 or 1C354;
‘Immunotoxins’ containing items controlled by 1C351.d; or
‘Medical products’ that contain any of the following:
‘Toxins’ controlled by 1C351.d (except for botulinum toxins controlled by 1C351.d.1, conotoxins controlled by 1C351.d.3, or items controlled for CW reasons under 1C351.d.4 or .d.5); or
Genetically modified organisms or genetic elements controlled by 1C353.a.3 (except for those that contain, or code for, botulinum toxins controlled by 1C351.d.1 or conotoxins controlled by 1C351.d.3);
‘Medical products’ not controlled by X.C.IX.005.c that contain any of the following:
Botulinum toxins controlled by 1C351.d.1;
Conotoxins controlled by 1C351.d.3; or
Genetically modified organisms or genetic elements controlled by 1C353.a.3 that contain, or code for, botulinum toxins controlled by 1C351.d.1 or conotoxins controlled by 1C351.d.3; or
‘Diagnostic and food testing kits’ containing items controlled by 1C351.d (except for items controlled for CW reasons under 1C351.d.4 or .d.5).
Technical Notes:
1. ‘Medical products’ are: (1) pharmaceutical formulations designed for testing and human (or veterinary) administration in the treatment of medical conditions, (2) prepackaged for distribution as clinical or medical products, and (3) approved by the European Medicines Agency (EMA) either to be marketed as clinical or medical products or for use as research new drug.
2. ‘Diagnostic and food testing kits’ are specifically developed, packaged and marketed for diagnostic or public health purposes. Biological toxins in any other configuration, including bulk shipments, or for any other end-uses are controlled by 1C351.
Commercial charges and devices containing energetic materials, other than those specified in the CML or in Regulation (EU) 2021/821, and nitrogen trifluoride in a gaseous state (see List of Items Controlled):
Shaped charges specially designed for oil well operations, utilizing one charge functioning along a single axis, that upon detonation produce a hole, and
Contain any formulation of ‘controlled materials’;
Have only a uniform shaped conical liner with an included angle of 90 degrees or less;
Contain more than 0,010 kg but less than or equal to 0,090 kg of ‘controlled materials’; and
Have a diameter not exceeding 114,3 cm;
Shaped charges specially designed for oil well operations containing less than or equal to 0,010 kg of ‘controlled materials’;
Detonation cord or shock tubes containing less than or equal to 0,064 kg/m of ‘controlled materials’;
Cartridge power devices, that contain less than or equal to 0,70 kg of ‘controlled materials’ in the deflagration material;
Detonators (electric or nonelectric) and assemblies thereof, that contain less than or equal to 0,01 kg of ‘controlled materials’;
Igniters, that contain less than or equal to 0,01 kg of ‘controlled materials’;
Oil well cartridges, that contain less than or equal to 0,015 kg of controlled ‘energetic materials’;
Commercial cast or pressed boosters containing less than or equal to 1,0 kg of ‘controlled materials’;
Commercial prefabricated slurries and emulsions containing less than or equal to 10,0 kg and less than or equal to 35 % by weight of ML8 ‘controlled materials’;
Cutters and severing tools containing less than or equal to 3,5 kg of ‘controlled materials’;
Pyrotechnic devices when designed exclusively for commercial purposes (e.g., theatrical stages, motion picture special effects, and fireworks displays) and containing less than or equal to 3,0 kg of ‘controlled materials’;
Other commercial explosive devices and charges not controlled by X.C.IX.006.a through .k containing less than or equal to 1,0 kg of ‘controlled materials’; or
Note: X.C.IX.006.l includes automotive safety devices; extinguishing systems; cartridges for riveting guns; explosive charges for agricultural, oil and gas operations, sporting goods, commercial mining, or public works purposes; and delay tubes used in the assembly of commercial explosive devices.
Nitrogen trifluoride (NF3) in a gaseous state.
Notes:
1. ‘Controlled materials’ means controlled energetic materials (see 1C011, 1C111, 1C239 or ML8).
2. Nitrogen trifluoride when not in a gaseous state is controlled under ML8.d by the CML.
Mixtures not controlled by 1C350 or 1C450 that contain chemicals controlled by 1C350 or 1C450 and medical, analytical, diagnostic, and food testing kits not controlled by 1C350 or 1C450 that contain chemicals controlled by 1C350, as follows (see List of Items Controlled):
Mixtures containing the following concentrations of precursor chemicals controlled by 1C350:
Mixtures containing 10 % or less, by weight, of any single CWC Schedule 2 chemical controlled by 1C350;
Mixtures containing less than 30 %, by weight, of:
Any single CWC Schedule 3 chemical controlled by 1C350; or
Any single non-CWC precursor chemical controlled by 1C350;
Mixtures containing the following concentrations of toxic or precursor chemicals controlled by 1C450:
Mixtures containing the following concentrations of CWC Schedule 2 chemicals controlled by 1C450:
Mixtures containing 1 % or less, by weight, of any single CWC Schedule 2 chemical controlled by 1C450.a.1 and a.2 (i.e., mixtures containing Amiton or PFIB); or
Mixtures containing 10 % or less, by weight, of any single CWC Schedule 2 chemical controlled by 1C450.b.1, b.2, b.3, b.4, b.5, or b.6;
Mixtures containing less than 30 %, by weight, of any single CWC Schedule 3 chemical controlled by 1C450.a.4, a.5., a.6., a.7, or 1C450.b.8;
‘Medical, analytical, diagnostic, and food testing kits’ that contain precursor chemicals controlled by 1C350 in an amount not exceeding 300 grams per chemical.
Technical Note:
For the purpose of this entry, ‘medical, analytical, diagnostic, and food testing kits’ are pre-packaged materials of defined composition that are specifically developed, packaged and marketed for medical, analytical, diagnostic, or public health purposes. Replacement reagents for medical, analytical, diagnostic, and food testing kits described in X.C.IX.007.c are controlled by 1C350 if the reagents contain at least one of the precursor chemicals identified in that entry in concentrations equal to or greater than the control levels for mixtures indicated in 1C350.
Non-fluorinated polymeric substances, not controlled by 1C008, as follows (see List of Items Controlled):
Polyarylene ether ketones, as follows:
Polyether ether ketone (PEEK);
Polyether ketone ketone (PEKK);
Polyether ketone (PEK); or
Polyether ketone ether ketone ketone (PEKEKK);
Not used.
Specific materials, other than those specified in the CML or in Regulation (EU) 2021/821, as follows (see List of Items Controlled):
Hardened steel and tungsten carbide precision ball bearings (3 mm or greater diameter);
304 and 316 stainless steel plate, other than those specified in the CML or in Regulation (EU) 2021/821;
Monel plate;
Tributyl phosphate (CAS 126-73-8);
Nitric acid (CAS 7697-37-2) in concentrations of 20 % weight or greater;
Fluorine (CAS 7782-41-4); or
Alpha-emitting radionuclides, other than those specified in the CML or in Regulation (EU) 2021/821.
Aromatic polyamides (aramids) not controlled by 1C010, 1C210 or X.C.IX.004, presented in any of the following forms (see List of Items Controlled):
Primary forms;
Filament yarn or monofilaments;
Filament tows;
Rovings;
Staple or chopped fibres;
Fabrics;
Pulp or flocks.
Nanomaterials as follows (see List of Items Controlled):
Semiconductor nanomaterials;
Composite-based nanomaterials; or
Any of the following carbon-based nanomaterials:
Carbon nanotubes;
Carbon nanofibres;
Fullerenes;
Graphenes; or
Carbon onions.
Notes: For the purpose of X.C.IX.011, nanomaterial means a material that meets at least one of the following criteria:
1. Consists of particles, with one or more external dimensions in the size range 1 - 100 nm for more than 1 % of their number size distribution;
2. Has internal or surface structures in one or more dimensions in the size range 1 - 100 nm; or
3. Has a specific surface area by volume greater than 60 m2/cm3, excluding materials consisting of particles with a size lower than 1 nm.
Specific software, other than those specified in the CML or in Regulation (EU) 2021/821, as follows (see List of Items Controlled):
Software specially designed for industrial process control hardware/systems controlled by X.B.IX.001, other than those specified in the CML or in Regulation (EU) 2021/821; or
Software specially designed for equipment for the production of structural composites, fibres, prepregs and preforms controlled by X.B.IX.001, other than those specified in the CML or in Regulation (EU) 2021/821.
‘Technology’ for the ‘development’, ‘production’, or ‘use’ of fibrous and filamentary materials controlled by X.C.IX.004 and X.C.IX.010.
‘Technology’ for the ‘development’, ‘production’, or ‘use’ of nanomaterials controlled by X.C.IX.011.
Category X – Materials Processing
Explosives or detonator detection equipment, both bulk and trace based, consisting of an automated device, or combination of devices for automated decision making to detect the presence of different types of explosives, explosive residue, or detonators; and components, other than those specified in the CML or in Regulation (EU) 2021/821:
Explosives detection equipment for ‘automated decision making’ to detect and identify bulk explosives utilizing, but not limited to, X-ray (e.g., computed tomography, dual energy, or coherent scattering), nuclear (e.g., thermal neutron analysis, pulse fast neutron analysis, pulse fast neutron transmission spectroscopy, and gamma resonance absorption), or electromagnetic techniques (e.g., quadropole resonance and dielectrometry);
Not used;
Detonator detection equipment for automated decision making to detect and identify initiation devices (e.g. detonators, blasting caps) utilizing, but not limited to, X-ray (e.g. dual energy or computed tomography) or electromagnetic techniques.
Note: Explosives or detonation detection equipment in X.A.X.001 includes equipment for screening people, documents, baggage, other personal effects, cargo and/or mail.
Technical Notes:
1. ‘Automated decision making is the ability of the equipment to detect explosives or detonators at the design or operator-selected level of sensitivity and provide an automated alarm when explosives or detonators at or above the sensitivity level are detected.
2. This entry does not control equipment that depends on operator interpretation of indicators such as inorganic/organic color mapping of the items(s) being scanned.
3. Explosives and detonators include commercial charges and devices controlled by X.C.VIII.004 and X.C.IX.006 and energetic materials controlled by 1C011, 1C111 and 1C239.
Concealed object detection equipment operating in the frequency range from 30 GHz to 3 000 GHz and having a spatial resolution of 0,1 mrad (milliradian) up to and including 1 mrad (milliradian) at a standoff distance of 100 m; and components, other than those specified in the CML or in Regulation (EU) 2021/821.
Note: Concealed object detection equipment includes but is not limited to equipment for screening people, documents, baggage, other personal effects, cargo and/or mail.
Technical Note:
The range of frequencies span what is generally considered as the millimetre-wave, submillimetre-wave and terahertz frequency regions.
Bearings and bearing systems not controlled by 2A001 (see List of Items Controlled):
Ball bearings or Solid ball bearings, having tolerances specified by the manufacturer in accordance with ABEC 7, ABEC 7P, or ABEC 7T or ISO Standard Class 4 or better (or equivalents) and having any of the following characteristics;
Manufactured for use at operating temperatures above 573 K (300°C) either by using special materials or by special heat treatment; or
With lubricating elements or component modifications that, according to the manufacturer's specifications, are specially designed to enable the bearings to operate at speeds exceeding 2,3 million ‘DN’;
Solid tapered roller bearings, having tolerances specified by the manufacturer in accordance with ANSI/AFBMA Class 00 (inch) or Class A (metric) or better (or equivalents) and having either of the following characteristics;
With lubricating elements or component modifications that, according to the manufacturer's specifications, are specially designed to enable the bearings to operate at speeds exceeding 2,3 million ‘DN’; or
Manufactured for use at operating temperatures below 219 K (-54°C) or above 423 K (150°C);
Gas-lubricated foil bearing manufactured for use at operating temperatures of 561 K (288°C) or higher and a unit load capacity exceeding 1 MPa;
Active magnetic bearing systems;
Fabric-lined self-aligning or fabric-lined journal sliding bearings manufactured for use at operating temperatures below 219 K (-54°C) or above 423 K (150°C).
Technical Notes:
1. ‘DN’ is the product of the bearing bore diameter in mm and the bearing rotational velocity in rpm.
2. Operating temperatures include those temperatures obtained when a gas turbine engine has stopped after operation
Piping, fittings and valves made of, or lined with stainless, copper-nickel alloy or other alloy steel containing 10 % or more nickel and/or chromium:
Pressure tube, pipe, and fittings of 200 mm or more inside diameter, and suitable for operation at pressures of 3,4 MPa or greater;
Pipe valves having all of the following characteristics that are not controlled by 2B350.g:
A pipe size connection of 200 mm or more inside diameter; and
Rated at 10,3 MPa or more.
Notes:
1. See X.D.X.005 for software for items controlled under this entry.
2. See 2E001 (‘development’), 2E002 (‘production’), and X.E.X.003 (‘use’) for technology for items controlled under this entry.
3. See related controls 2A226, 2B350 and X.B.X.010.
Pumps designed to move molten metals by electromagnetic forces.
Notes:
1. See X.D.X.005 for software for items controlled under this entry.
2. See 2E001 (‘development’), 2E002 (‘production’), and X.E.X.003 (‘use’) for technology for items controlled under this entry.
3. Pumps for use in liquid-metal-cooled reactors are controlled by 0A001.
‘Portable electric generators’ and specially designed components.
Technical Note:
‘Portable electric generators’ – The generators that are in X.A.X.006 are portable – 2 268 kg or less on wheels or transportable in a 2,5 tonnes truck without a special set up requirement.
Specific processing equipment, other than those specified in the CML or in Regulation (EU) 2021/821, as follows (see List of Items Controlled):
Bellows sealed valves;
Not used.
‘Continuous flow reactors’ and their ‘modular components’.
Technical Notes:
1. For the purposes of X.B.X.001, ‘continuous flow reactors’ consist in plug and play systems where reactants are continuously fed into the reactor and the resultant product is collected at the outlet.
2. For purposes of X.B.X.001, ‘modular components’ are fluidic modules, liquid pumps, valves, packed-bed modules, mixer modules, pressure gauges, liquid-liquid separators, etc.
Nucleic acid assemblers and synthesizers not controlled by 2B352.i, which are partly or entirely automated, and designed to generate nucleic acids greater than 50 bases.
Automated peptide synthesizers capable to work under controlled atmosphere conditions.
Numerical control units for machine tools and ‘numerically controlled’ machine tools, other than those specified in the CML or in Regulation (EU) 2021/821 (see List of Items Controlled):
‘Numerical control’ units for machine tools:
Having four interpolating axes that can be coordinated simultaneously for contouring control; or
Having two or more axes that can be coordinated simultaneously for contouring control and a minimum programmable increment better (less) than 0,001 mm;
‘Numerical control’ units for machine tools having two, three or four interpolating axes that can be coordinated simultaneously for contouring control, and capable of receiving directly (on-line) and processing computer-aided-design (CAD) data for internal preparation of machine instructions; or
Motion control boards specially designed for machine tools and having any of the following characteristics:
Interpolation in more than four axes;
Capable of real-time processing of data to modify tool path, feed rate and spindle data, during the machining operation, by any of the following:
Automatic calculation and modification of part program data for machining in two or more axes by means of measuring cycles and access to source data; or
Adaptive control with more than one physical variable measured and processed by means of a computing model (strategy) to change one or more machining instructions to optimize the process; or
Capable of receiving and processing CAD data for internal preparation of machine instructions;
‘Numerically controlled’ machine tools that, according to the manufacturer's technical specifications, can be equipped with electronic devices for simultaneous contouring control in two or more axes and that have both of the following characteristics:
Two or more axes that can be coordinated simultaneously for contouring control; and
Positioning accuracies according to ISO 230/2 (2006), with all compensations available:
Better than 15 μm along any linear axis (overall positioning) for grinding machines;
Better than 15 μm along any linear axis (overall positioning) for milling machines; or
Better than 15 μm along any linear axis (overall positioning) for turning machines; or
Machine tools, as follows, for removing or cutting metals, ceramics or composites, that, according to the manufacturer's technical specifications, can be equipped with electronic devices for simultaneous contouring control in two or more axes:
Machine tools for turning, grinding, milling or any combination thereof, having two or more axes that can be coordinated simultaneously for contouring control and having any of the following characteristics:
One or more contouring ‘tilting spindles’;
Note: X.B.X.004.d.1.a. applies to machine tools for grinding or milling only.
‘Camming’ (axial displacement) in one revolution of the spindle less (better) than 0,0006 mm total indicator reading (TIR);
Note: X.B.X.004.d.1.b. applies to machine tools for turning only.
‘Run out’ (out-of-true running) in one revolution of the spindle less (better) than 0,0006 mm total indicator reading (TIR); or
The ‘positioning accuracies’, with all compensations available, are less (better) than: 0,001° on any rotary axis;
Electrical discharge machines (EDM) of the wire feed type that have five or more axes that can be coordinated simultaneously for contouring control.
Non-‘numerically controlled’ machine tools for generating optical quality surfaces, (see List of Items Controlled) and specially designed components therefor:
Turning machines using a single point cutting tool and having all of the following characteristics:
Slide positioning accuracy less (better) than 0,0005 mm per 300 mm of travel;
Bidirectional slide positioning repeatability less (better) than 0,00025 mm per 300 mm of travel;
Spindle ‘run out’ and ‘camming’ less (better) than 0,0004 mm total indicator reading (TIR);
Angular deviation of the slide movement (yaw, pitch and roll) less (better) than 2 seconds of arc, TIR, over full travel; and
Slide perpendicularity less (better) than 0,001 mm per 300 mm of travel;
Technical Note:
The bidirectional slide positioning repeatability (R) of an axis is the maximum value of the repeatability of positioning at any position along or around the axis determined using the procedure and under the conditions specified in part 2.11 of ISO 230/2: 1988.
Fly cutting machines having all of the following characteristics:
Spindle ‘run out’ and ‘camming’ less (better) than 0,0004 mm TIR; and
Angular deviation of slide movement (yaw, pitch and roll) less (better) than 2 seconds of arc, TIR, over full travel.
Gearmaking and/or finishing machinery not controlled by 2B003 capable of producing gears to a quality level of better than AGMA 11.
Dimensional inspection or measuring systems or equipment not controlled by 2B006 or 2B206, as follows (see List of Items Controlled):
Manual dimensional inspection machines, having both of the following characteristics:
Two or more axes; and
A measurement uncertainty equal to or less (better) than (3 + L/300) μm in any axes (L measured length in mm).
‘Robots’ not controlled by 2B007 or 2B207 that are capable of employing feedback information in real-time processing from one or more sensors to generate or modify programs or to generate or modify numerical program data.
Assemblies, circuit boards or inserts specially designed for machine tools controlled by X.B.X.004, or for equipment controlled by X.B.X.006, X.B.X.007 or X.B.X.008:
Spindle assemblies, consisting of spindles and bearings as a minimal assembly, with radial (‘run out’) or axial (‘camming’) axis motion in one revolution of the spindle less (better) than 0,0006 mm total indicator reading (TIR);
Single point diamond cutting tool inserts, having all of the following characteristics:
Flawless and chip-free cutting edge when magnified 400 times in any direction;
Cutting radius from 0,1 to 5 mm inclusive; and
Cutting radius out-of-roundness less (better) than 0,002 mm TIR.
Specially designed printed circuit boards with mounted components capable of upgrading, according to the manufacturer's specifications, ‘numerical control’ units, machine tools or feed-back devices to or above the levels specified in X.B.X.004, X.B.X.006, X.B.X.007, X.B.X.008, or X.B.X.009.
Technical Note:
This entry does not control measuring interferometer systems, without closed or open loop feedback, containing a laser to measure slide movement errors of machine-tools, dimensional inspection machines or similar equipment.
Specific processing equipment, other than those specified in the CML or in Regulation (EU) 2021/821, as follows (see List of Items Controlled):
Isostatic presses, other than those specified in the CML or in Regulation (EU) 2021/821;
Bellows manufacturing equipment, including hydraulic forming equipment and bellows forming dies;
Laser welding machines;
MIG welders;
E-beam welders;
Monel equipment, including valves, piping, tanks and vessels;
304 and 316 stainless steel valves, piping, tanks and vessels;
Note: Fittings are considered part of piping for purposes of X.B.X.010.g.
Mining and drilling equipment, as follows:
Large boring equipment capable of drilling holes greater than 61 cm in diameter;
Large earth-moving equipment used in the mining industry;
Electroplating equipment designed for coating parts with nickel or aluminum;
Pumps designed for industrial service and for use with an electrical motor of 5 HP or greater;
Vacuum valves, piping, flanges, gaskets and related equipment specially designed for use in high-vacuum service, other than those specified in the CML or in Regulation (EU) 2021/821;
Spin forming and flow forming machines, other than those specified in the CML or in Regulation (EU) 2021/821;
Centrifugal multiplane balancing machines, other than those specified in the CML or in Regulation (EU) 2021/821;
Austenitic stainless steel plate, valves, piping, tanks and vessels.
‘Software’ specially designed or modified for the ‘development’, ‘production’ or ‘use’ of equipment controlled by X.A.X.001.
‘Software’‘required’ for the ‘development’, ‘production’ or ‘use’ of concealed object detection equipment controlled by X.A.X.002.
‘Software’ specially designed for the ‘development’, ‘production’, or ‘use’ of equipment controlled by X.B.X.004, X.B.X.006, or X.B.X.007, X.B.X.008, and X.B.X.009.
Specific ‘software’, as follows (see List of Items Controlled):
‘Software’ to provide adaptive control and having both of the following characteristics:
For flexible manufacturing units (FMUs); and
Capable of generating or modifying, in real-time processing, programs or data by using the signals obtained simultaneously by means of at least two detection techniques, such as:
Machine vision (optical ranging);
Infrared imaging;
Acoustical imaging (acoustical ranging);
Tactile measurement;
Inertial positioning;
Force measurement; and
Torque measurement.
Note: X.D.X.004.a does not control ‘software’ which only provides rescheduling of functionally identical equipment within ‘flexible manufacturing units’ using pre-stored part programs and a pre-stored strategy for the distribution of the part programs.
Not used.
‘Software’ specially designed or modified for the ‘development,’‘production,’ or ‘use’ of items controlled by X.A.X.004 or X.A.X.005.
Note: See 2E001 (‘development’) for ‘technology’ for ‘software’ controlled under this entry.
‘Software’ specially designed for the ‘development’ or ‘production’ of portable electric generators controlled by X.A.X.006.
‘Technology’‘required’ for the ‘development, ‘production’ or ‘use’ of equipment controlled by X.A.X.002 or required for the ‘development’ of ‘software’ controlled by X.D.X.002.
Note: See X.A.X.002 and X.D.X.002 for related commodity and software controls.
‘Technology’ for the ‘use’ of equipment controlled by X.B.X.004, X.B.X.006, X.B.X.007, or X.B.X.008.
‘Technology’ according to the General Technology Note for the ‘use’ of equipment controlled by X.A.X.004 or X.A.X.005.
‘Technology’ for the ‘use’ of portable electric generators controlled by X.A.X.006.
Part B
1. Semiconductor devices
|
CN Code |
Description |
|
8541 10 |
Diodes, other than photosensitive or light-emitting diodes (LED) |
|
8541 21 |
Transistors, other than photosensitive transistors with a dissipation rate of less than 1 W |
|
8541 29 |
Other transistors, other than photosensitive transistors |
|
8541 49 |
Photosensitive semiconductor devices (excl. Photovoltaic generators and cells) |
|
8541 51 |
Other semiconductor devices: Semiconductor-based transducers |
|
8541 59 |
Other semiconductor devices |
|
8541 90 |
Semiconductor devices: Parts |
2. Electronic integrated circuits
|
CN Code |
Description |
|
8542 31 |
Processors and controllers, whether or not combined with memories, converters, logic circuits, amplifiers, clock and timing circuits, or other circuits |
|
8542 32 |
Memories |
|
8542 33 |
Amplifiers |
|
8542 39 |
Other Electronic Integrated Circuits |
|
8542 90 |
Electronic integrated circuits: Parts |
3. Photographic cameras
|
CN Code |
Description |
|
9006 30 |
Cameras specially designed for underwater use, for aerial survey or for medical or surgical examination of internal organs; comparison cameras for forensic or criminological purposes |
ANNEX VIII
List of partner countries referred to in Articles 2(4), 2a(4), 2d(4), 3h(3), 3k(4) and 5n(7)
THE UNITED STATES OF AMERICA
JAPAN
UNITED KINGDOM
SOUTH KOREA
ANNEX IX
A. Model for supply, transfer or export notification, application and authorisation forms
(referred to in Article 2c of this Regulation)
The export authorisation is valid in all Member States of the European Union until its expiry date.
A. Model for brokering services/ technical assistance notification, application and authorisation forms
(referred to in Article 2C of this Regulation)
ANNEX X
List of goods and technologies referred to in Article 3b(1)
|
|
CN |
Product |
|
ex |
8414 10 81 |
Cryogenic pumps in the LNG-process |
|
ex |
8418 69 00 |
Process units for gas cooling in the LNG-process |
|
ex |
8419 40 00 |
Atmospheric-vacuum crude distillation units (CDU) |
|
ex |
8419 40 00 |
Process units for the separation and fractionation of the hydrocarbons in the LNG-process |
|
ex |
8419 50 20 , 8419 50 80 |
Cold boxes in the LNG-process |
|
ex |
8419 50 20 , 8419 50 80 |
Cryogenic exchangers in the LNG-process |
|
ex |
8419 60 00 |
Process units for the liquefaction of the natural gas |
|
ex |
8419 60 00 , 8419 89 98 , 8421 39 15 , 8421 39 25 , 8421 39 35 , 8421 39 85 |
Hydrogen recovery and purification technology |
|
ex |
8419 60 00 , 8419 89 98 , 8421 39 35 , 8421 39 85 |
Refinery fuel gas treatment and sulphur recovery technology (including amine scrubbing units, sulphur recovery units, tail gas treatment units) |
|
ex |
8419 89 10 |
Cooling towers and similar plant for direct cooling (without a separating wall) by means of recirculated water, designed to be used with the technology listed in this Annex. |
|
ex |
8419 89 98 |
Alkylation and isomerization units |
|
ex |
8419 89 98 |
Aromatic hydrocarbon production units |
|
ex |
8419 89 98 |
Catalytic reforming / cracker units |
|
ex |
8419 89 98 |
Delayed cokers |
|
ex |
8419 89 98 |
Flexicoking units |
|
ex |
8419 89 98 |
Hydrocracking reactors |
|
ex |
8419 89 98 |
Hydrocracking reactor vessels |
|
ex |
8419 89 98 |
Hydrogen generation technology |
|
ex |
8419 89 98 |
Hydrotreatment technology/units |
|
ex |
8419 89 98 |
Naphtha isomerisation units |
|
ex |
8419 89 98 |
Polymerisation units |
|
ex |
8419 89 98 |
Sulphur production units |
|
ex |
8419 89 98 |
Sulphuric acid alkylation and sulphuric acid regeneration units |
|
ex |
8419 89 98 |
Thermal cracking units |
|
ex |
8419 89 98 |
[Toluene and heavy aromatics] Transalkylation units |
|
ex |
8419 89 98 |
Visbreakers |
|
ex |
8419 89 98 |
Vacuum gas oil hydrocracking units |
|
ex |
8479 89 97 |
Solvent de-asphalting units |
ANNEX XI
List of goods and technologies referred to in Article 3c(1)
Part A
|
CN Code |
Description |
|
88 |
Aircraft, spacecraft, and parts thereof |
Part B
|
CN Code |
Description |
|
ex 2710 19 83 |
Hydraulic oils for the usage in vehicles of Chapter 88 |
|
2710 19 99 |
Other lubricating oils and other oils for use in aviation |
|
4011 30 00 |
New pneumatic tyres of rubber, of a kind used on aircraft |
|
ex 6813 20 00 |
Brake discs and pads for use on aircraft |
|
6813 81 00 |
Brake linings and pads |
|
8517 71 00 |
Aerials and aerial reflectors of all kinds; parts suitable for use therewith |
|
8517 79 00 |
Other parts related to aerials |
|
9024 10 00 |
Machines and appliances for testing the hardness, strength, compressibility, elasticity or other mechanical properties of materials: Machines and appliances for testing metals |
|
9026 00 00 |
Instruments and apparatus for measuring or checking the flow, level, pressure or other variables of liquids or gases (for example, flow meters, level gauges, manometers, heat meters), excluding instruments and apparatus of heading 9014 , 9015 , 9028 or 9032 |
ANNEX XII
List of legal persons, entities and bodies referred to in Article 5(2)
ANNEX XIII
List of legal persons, entities and bodies referred to in Article 5(4)(a)
ANNEX XIV
List of legal persons, entities and bodies referred to in article 5h
|
Name of the legal person, entity or body |
Date of application |
|
Bank Otkritie |
12 March 2022 |
|
Novikombank |
12 March 2022 |
|
Promsvyazbank |
12 March 2022 |
|
Bank Rossiya |
12 March 2022 |
|
Sovcombank |
12 March 2022 |
|
VNESHECONOMBANK (VEB) |
12 March 2022 |
|
VTB BANK |
12 March 2022 |
|
Sberbank |
14 June 2022 |
|
Credit Bank of Moscow |
14 June 2022 |
|
Joint Stock Company Russian Agricultural Bank, JSC Rosselkhozbank |
14 June 2022 |
ANNEX XV
List of legal persons, entities or bodies referred to in article 2f
ANNEX XVI
List of goods and technology referred to in article 3f
Category VI – Marine
Vessels, marine systems or equipment, and specially designed components therefor, components and accessories:
Equipment contained in chapter 4 (navigation equipment) of the applicable Commission Implementing Regulation on design, construction and performance requirements and testing standards for marine equipment adopted in accordance with Article 35(2) of Directive 2014/90/EU of the European Parliament and of the Council of 23 July 2014 on marine equipment;
Equipment contained in chapter 5 (radio-communication equipment) of the applicable Commission Implementing Regulation on design, construction and performance requirements and testing standards for marine equipment adopted in accordance with Article 35(2) of Directive 2014/90/EU of the European Parliament and of the Council of 23 July 2014 on marine equipment;
ANNEX XVII
List of iron and steel products referred to in Article 3g
Part A
|
CN/TARIC Codes |
Name of the good |
|
7208 10 00 |
Non Alloy and Other Alloy Hot Rolled Sheets and Strips |
|
7208 25 00 |
Non Alloy and Other Alloy Hot Rolled Sheets and Strips |
|
7208 26 00 |
Non Alloy and Other Alloy Hot Rolled Sheets and Strips |
|
7208 27 00 |
Non Alloy and Other Alloy Hot Rolled Sheets and Strips |
|
7208 36 00 |
Non Alloy and Other Alloy Hot Rolled Sheets and Strips |
|
7208 37 00 |
Non Alloy and Other Alloy Hot Rolled Sheets and Strips |
|
7208 38 00 |
Non Alloy and Other Alloy Hot Rolled Sheets and Strips |
|
7208 39 00 |
Non Alloy and Other Alloy Hot Rolled Sheets and Strips |
|
7208 40 00 |
Non Alloy and Other Alloy Hot Rolled Sheets and Strips |
|
7208 52 99 |
Non Alloy and Other Alloy Hot Rolled Sheets and Strips |
|
7208 53 90 |
Non Alloy and Other Alloy Hot Rolled Sheets and Strips |
|
7208 54 00 |
Non Alloy and Other Alloy Hot Rolled Sheets and Strips |
|
7211 14 00 |
Non Alloy and Other Alloy Hot Rolled Sheets and Strips |
|
7211 19 00 |
Non Alloy and Other Alloy Hot Rolled Sheets and Strips |
|
7212 60 00 |
Non Alloy and Other Alloy Hot Rolled Sheets and Strips |
|
7225 19 10 |
Non Alloy and Other Alloy Hot Rolled Sheets and Strips |
|
7225 30 10 |
Non Alloy and Other Alloy Hot Rolled Sheets and Strips |
|
7225 30 30 |
Non Alloy and Other Alloy Hot Rolled Sheets and Strips |
|
7225 30 90 |
Non Alloy and Other Alloy Hot Rolled Sheets and Strips |
|
7225 40 15 |
Non Alloy and Other Alloy Hot Rolled Sheets and Strips |
|
7225 40 90 |
Non Alloy and Other Alloy Hot Rolled Sheets and Strips |
|
7226 19 10 |
Non Alloy and Other Alloy Hot Rolled Sheets and Strips |
|
7226 91 20 |
Non Alloy and Other Alloy Hot Rolled Sheets and Strips |
|
7226 91 91 |
Non Alloy and Other Alloy Hot Rolled Sheets and Strips |
|
7226 91 99 |
Non Alloy and Other Alloy Hot Rolled Sheets and Strips |
|
7209 15 00 |
Non Alloy and Other Alloy Cold Rolled Sheets |
|
7209 16 90 |
Non Alloy and Other Alloy Cold Rolled Sheets |
|
7209 17 90 |
Non Alloy and Other Alloy Cold Rolled Sheets |
|
7209 18 91 |
Non Alloy and Other Alloy Cold Rolled Sheets |
|
7209 25 00 |
Non Alloy and Other Alloy Cold Rolled Sheets |
|
7209 26 90 |
Non Alloy and Other Alloy Cold Rolled Sheets |
|
7209 27 90 |
Non Alloy and Other Alloy Cold Rolled Sheets |
|
7209 28 90 |
Non Alloy and Other Alloy Cold Rolled Sheets |
|
7209 90 20 |
Non Alloy and Other Alloy Cold Rolled Sheets |
|
7209 90 80 |
Non Alloy and Other Alloy Cold Rolled Sheets |
|
7211 23 20 |
Non Alloy and Other Alloy Cold Rolled Sheets |
|
7211 23 30 |
Non Alloy and Other Alloy Cold Rolled Sheets |
|
7211 23 80 |
Non Alloy and Other Alloy Cold Rolled Sheets |
|
7211 29 00 |
Non Alloy and Other Alloy Cold Rolled Sheets |
|
7211 90 20 |
Non Alloy and Other Alloy Cold Rolled Sheets |
|
7211 90 80 |
Non Alloy and Other Alloy Cold Rolled Sheets |
|
7225 50 20 |
Non Alloy and Other Alloy Cold Rolled Sheets |
|
7225 50 80 |
Non Alloy and Other Alloy Cold Rolled Sheets |
|
7226 20 00 |
Non Alloy and Other Alloy Cold Rolled Sheets |
|
7226 92 00 |
Non Alloy and Other Alloy Cold Rolled Sheets |
|
7209 16 10 |
Electrical Sheets (other than GOES) |
|
7209 17 10 |
Electrical Sheets (other than GOES) |
|
7209 18 10 |
Electrical Sheets (other than GOES) |
|
7209 26 10 |
Electrical Sheets (other than GOES) |
|
7209 27 10 |
Electrical Sheets (other than GOES) |
|
7209 28 10 |
Electrical Sheets (other than GOES) |
|
7225 19 90 |
Electrical Sheets (other than GOES) |
|
7226 19 80 |
Electrical Sheets (other than GOES) |
|
7210410020 |
Metallic Coated Sheets |
|
7210410030 |
Metallic Coated Sheets |
|
7210490020 |
Metallic Coated Sheets |
|
7210490030 |
Metallic Coated Sheets |
|
7210610020 |
Metallic Coated Sheets |
|
7210610030 |
Metallic Coated Sheets |
|
7210690020 |
Metallic Coated Sheets |
|
7210690030 |
Metallic Coated Sheets |
|
7212300020 |
Metallic Coated Sheets |
|
7212300030 |
Metallic Coated Sheets |
|
7212506120 |
Metallic Coated Sheets |
|
7212506130 |
Metallic Coated Sheets |
|
7212506920 |
Metallic Coated Sheets |
|
7212506930 |
Metallic Coated Sheets |
|
7225920020 |
Metallic Coated Sheets |
|
7225920030 |
Metallic Coated Sheets |
|
7225990011 |
Metallic Coated Sheets |
|
7225990022 |
Metallic Coated Sheets |
|
7225990023 |
Metallic Coated Sheets |
|
7225990041 |
Metallic Coated Sheets |
|
7225990045 |
Metallic Coated Sheets |
|
7225990091 |
Metallic Coated Sheets |
|
7225990092 |
Metallic Coated Sheets |
|
7225990093 |
Metallic Coated Sheets |
|
7226993010 |
Metallic Coated Sheets |
|
7226993030 |
Metallic Coated Sheets |
|
7226997011 |
Metallic Coated Sheets |
|
7226997013 |
Metallic Coated Sheets |
|
7226997091 |
Metallic Coated Sheets |
|
7226997093 |
Metallic Coated Sheets |
|
7226997094 |
Metallic Coated Sheets |
|
7210 20 00 |
Metallic Coated Sheets |
|
7210 30 00 |
Metallic Coated Sheets |
|
7210 90 80 |
Metallic Coated Sheets |
|
7212 20 00 |
Metallic Coated Sheets |
|
7212 50 20 |
Metallic Coated Sheets |
|
7212 50 30 |
Metallic Coated Sheets |
|
7212 50 40 |
Metallic Coated Sheets |
|
7212 50 90 |
Metallic Coated Sheets |
|
7225 91 00 |
Metallic Coated Sheets |
|
7226 99 10 |
Metallic Coated Sheets |
|
7210410080 |
Metallic Coated Sheets |
|
7210490080 |
Metallic Coated Sheets |
|
7210610080 |
Metallic Coated Sheets |
|
7210690080 |
Metallic Coated Sheets |
|
7212300080 |
Metallic Coated Sheets |
|
7212506180 |
Metallic Coated Sheets |
|
7212506980 |
Metallic Coated Sheets |
|
7225920080 |
Metallic Coated Sheets |
|
7225990025 |
Metallic Coated Sheets |
|
7225990095 |
Metallic Coated Sheets |
|
7226993090 |
Metallic Coated Sheets |
|
7226997019 |
Metallic Coated Sheets |
|
7226997096 |
Metallic Coated Sheets |
|
7210 70 80 |
Organic Coated Sheets |
|
7212 40 80 |
Organic Coated Sheets |
|
7209 18 99 |
Tin Mill products |
|
7210 11 00 |
Tin Mill products |
|
7210 12 20 |
Tin Mill products |
|
7210 12 80 |
Tin Mill products |
|
7210 50 00 |
Tin Mill products |
|
7210 70 10 |
Tin Mill products |
|
7210 90 40 |
Tin Mill products |
|
7212 10 10 |
Tin Mill products |
|
7212 10 90 |
Tin Mill products |
|
7212 40 20 |
Tin Mill products |
|
7208 51 20 |
Non Alloy and Other Alloy Quarto Plates |
|
7208 51 91 |
Non Alloy and Other Alloy Quarto Plates |
|
7208 51 98 |
Non Alloy and Other Alloy Quarto Plates |
|
7208 52 91 |
Non Alloy and Other Alloy Quarto Plates |
|
7208 90 20 |
Non Alloy and Other Alloy Quarto Plates |
|
7208 90 80 |
Non Alloy and Other Alloy Quarto Plates |
|
7210 90 30 |
Non Alloy and Other Alloy Quarto Plates |
|
7225 40 12 |
Non Alloy and Other Alloy Quarto Plates |
|
7225 40 40 |
Non Alloy and Other Alloy Quarto Plates |
|
7225 40 60 |
Non Alloy and Other Alloy Quarto Plates |
|
7219 11 00 |
Stainless Hot Rolled Sheets and Strips |
|
7219 12 10 |
Stainless Hot Rolled Sheets and Strips |
|
7219 12 90 |
Stainless Hot Rolled Sheets and Strips |
|
7219 13 10 |
Stainless Hot Rolled Sheets and Strips |
|
7219 13 90 |
Stainless Hot Rolled Sheets and Strips |
|
7219 14 10 |
Stainless Hot Rolled Sheets and Strips |
|
7219 14 90 |
Stainless Hot Rolled Sheets and Strips |
|
7219 22 10 |
Stainless Hot Rolled Sheets and Strips |
|
7219 22 90 |
Stainless Hot Rolled Sheets and Strips |
|
7219 23 00 |
Stainless Hot Rolled Sheets and Strips |
|
7219 24 00 |
Stainless Hot Rolled Sheets and Strips |
|
7220 11 00 |
Stainless Hot Rolled Sheets and Strips |
|
7220 12 00 |
Stainless Hot Rolled Sheets and Strips |
|
7219 31 00 |
Stainless Cold Rolled Sheets and Strips |
|
7219 32 10 |
Stainless Cold Rolled Sheets and Strips |
|
7219 32 90 |
Stainless Cold Rolled Sheets and Strips |
|
7219 33 10 |
Stainless Cold Rolled Sheets and Strips |
|
7219 33 90 |
Stainless Cold Rolled Sheets and Strips |
|
7219 34 10 |
Stainless Cold Rolled Sheets and Strips |
|
7219 34 90 |
Stainless Cold Rolled Sheets and Strips |
|
7219 35 10 |
Stainless Cold Rolled Sheets and Strips |
|
7219 35 90 |
Stainless Cold Rolled Sheets and Strips |
|
7219 90 20 |
Stainless Cold Rolled Sheets and Strips |
|
7219 90 80 |
Stainless Cold Rolled Sheets and Strips |
|
7220 20 21 |
Stainless Cold Rolled Sheets and Strips |
|
7220 20 29 |
Stainless Cold Rolled Sheets and Strips |
|
7220 20 41 |
Stainless Cold Rolled Sheets and Strips |
|
7220 20 49 |
Stainless Cold Rolled Sheets and Strips |
|
7220 20 81 |
Stainless Cold Rolled Sheets and Strips |
|
7220 20 89 |
Stainless Cold Rolled Sheets and Strips |
|
7220 90 20 |
Stainless Cold Rolled Sheets and Strips |
|
7220 90 80 |
Stainless Cold Rolled Sheets and Strips |
|
7219 21 10 |
Stainless Hot Rolled Quarto Plates |
|
7219 21 90 |
Stainless Hot Rolled Quarto Plates |
|
7214 30 00 |
Non Alloy and Other Alloy Merchant Bars and Light Sections |
|
7214 91 10 |
Non Alloy and Other Alloy Merchant Bars and Light Sections |
|
7214 91 90 |
Non Alloy and Other Alloy Merchant Bars and Light Sections |
|
7214 99 31 |
Non Alloy and Other Alloy Merchant Bars and Light Sections |
|
7214 99 39 |
Non Alloy and Other Alloy Merchant Bars and Light Sections |
|
7214 99 50 |
Non Alloy and Other Alloy Merchant Bars and Light Sections |
|
7214 99 71 |
Non Alloy and Other Alloy Merchant Bars and Light Sections |
|
7214 99 79 |
Non Alloy and Other Alloy Merchant Bars and Light Sections |
|
7214 99 95 |
Non Alloy and Other Alloy Merchant Bars and Light Sections |
|
7215 90 00 |
Non Alloy and Other Alloy Merchant Bars and Light Sections |
|
7216 10 00 |
Non Alloy and Other Alloy Merchant Bars and Light Sections |
|
7216 21 00 |
Non Alloy and Other Alloy Merchant Bars and Light Sections |
|
7216 22 00 |
Non Alloy and Other Alloy Merchant Bars and Light Sections |
|
7216 40 10 |
Non Alloy and Other Alloy Merchant Bars and Light Sections |
|
7216 40 90 |
Non Alloy and Other Alloy Merchant Bars and Light Sections |
|
7216 50 10 |
Non Alloy and Other Alloy Merchant Bars and Light Sections |
|
7216 50 91 |
Non Alloy and Other Alloy Merchant Bars and Light Sections |
|
7216 50 99 |
Non Alloy and Other Alloy Merchant Bars and Light Sections |
|
7216 99 00 |
Non Alloy and Other Alloy Merchant Bars and Light Sections |
|
7228 10 20 |
Non Alloy and Other Alloy Merchant Bars and Light Sections |
|
7228 20 10 |
Non Alloy and Other Alloy Merchant Bars and Light Sections |
|
7228 20 91 |
Non Alloy and Other Alloy Merchant Bars and Light Sections |
|
7228 30 20 |
Non Alloy and Other Alloy Merchant Bars and Light Sections |
|
7228 30 41 |
Non Alloy and Other Alloy Merchant Bars and Light Sections |
|
7228 30 49 |
Non Alloy and Other Alloy Merchant Bars and Light Sections |
|
7228 30 61 |
Non Alloy and Other Alloy Merchant Bars and Light Sections |
|
7228 30 69 |
Non Alloy and Other Alloy Merchant Bars and Light Sections |
|
7228 30 70 |
Non Alloy and Other Alloy Merchant Bars and Light Sections |
|
7228 30 89 |
Non Alloy and Other Alloy Merchant Bars and Light Sections |
|
7228 60 20 |
Non Alloy and Other Alloy Merchant Bars and Light Sections |
|
7228 60 80 |
Non Alloy and Other Alloy Merchant Bars and Light Sections |
|
7228 70 10 |
Non Alloy and Other Alloy Merchant Bars and Light Sections |
|
7228 70 90 |
Non Alloy and Other Alloy Merchant Bars and Light Sections |
|
7228 80 00 |
Non Alloy and Other Alloy Merchant Bars and Light Sections |
|
7214 20 00 |
Rebars |
|
7214 99 10 |
Rebars |
|
7222 11 11 |
Stainless Bars and Light Sections |
|
7222 11 19 |
Stainless Bars and Light Sections |
|
7222 11 81 |
Stainless Bars and Light Sections |
|
7222 11 89 |
Stainless Bars and Light Sections |
|
7222 19 10 |
Stainless Bars and Light Sections |
|
7222 19 90 |
Stainless Bars and Light Sections |
|
7222 20 11 |
Stainless Bars and Light Sections |
|
7222 20 19 |
Stainless Bars and Light Sections |
|
7222 20 21 |
Stainless Bars and Light Sections |
|
7222 20 29 |
Stainless Bars and Light Sections |
|
7222 20 31 |
Stainless Bars and Light Sections |
|
7222 20 39 |
Stainless Bars and Light Sections |
|
7222 20 81 |
Stainless Bars and Light Sections |
|
7222 20 89 |
Stainless Bars and Light Sections |
|
7222 30 51 |
Stainless Bars and Light Sections |
|
7222 30 91 |
Stainless Bars and Light Sections |
|
7222 30 97 |
Stainless Bars and Light Sections |
|
7222 40 10 |
Stainless Bars and Light Sections |
|
7222 40 50 |
Stainless Bars and Light Sections |
|
7222 40 90 |
Stainless Bars and Light Sections |
|
7221 00 10 |
Stainless Wire Rod |
|
7221 00 90 |
Stainless Wire Rod |
|
7213 10 00 |
Non Alloy and Other Alloy Wire Rod |
|
7213 20 00 |
Non Alloy and Other Alloy Wire Rod |
|
7213 91 10 |
Non Alloy and Other Alloy Wire Rod |
|
7213 91 20 |
Non Alloy and Other Alloy Wire Rod |
|
7213 91 41 |
Non Alloy and Other Alloy Wire Rod |
|
7213 91 49 |
Non Alloy and Other Alloy Wire Rod |
|
7213 91 70 |
Non Alloy and Other Alloy Wire Rod |
|
7213 91 90 |
Non Alloy and Other Alloy Wire Rod |
|
7213 99 10 |
Non Alloy and Other Alloy Wire Rod |
|
7213 99 90 |
Non Alloy and Other Alloy Wire Rod |
|
7227 10 00 |
Non Alloy and Other Alloy Wire Rod |
|
7227 20 00 |
Non Alloy and Other Alloy Wire Rod |
|
7227 90 10 |
Non Alloy and Other Alloy Wire Rod |
|
7227 90 50 |
Non Alloy and Other Alloy Wire Rod |
|
7227 90 95 |
Non Alloy and Other Alloy Wire Rod |
|
7216 31 10 |
Angles, Shapes and Sections of Iron or Non Alloy Steel |
|
7216 31 90 |
Angles, Shapes and Sections of Iron or Non Alloy Steel |
|
7216 32 11 |
Angles, Shapes and Sections of Iron or Non Alloy Steel |
|
7216 32 19 |
Angles, Shapes and Sections of Iron or Non Alloy Steel |
|
7216 32 91 |
Angles, Shapes and Sections of Iron or Non Alloy Steel |
|
7216 32 99 |
Angles, Shapes and Sections of Iron or Non Alloy Steel |
|
7216 33 10 |
Angles, Shapes and Sections of Iron or Non Alloy Steel |
|
7216 33 90 |
Angles, Shapes and Sections of Iron or Non Alloy Steel |
|
7301 10 00 |
Sheet Piling |
|
7302 10 22 |
Railway Material |
|
7302 10 28 |
Railway Material |
|
7302 10 40 |
Railway Material |
|
7302 10 50 |
Railway Material |
|
7302 40 00 |
Railway Material |
|
7306 30 41 |
Other tubes, pipes |
|
7306 30 49 |
Other tubes, pipes |
|
7306 30 72 |
Other tubes, pipes |
|
7306 30 77 |
Other tubes, pipes |
|
7306 61 10 |
Hollow sections |
|
7306 61 92 |
Hollow sections |
|
7306 61 99 |
Hollow sections |
|
7304 11 00 |
Seamless Stainless Tubes and Pipes |
|
7304 22 00 |
Seamless Stainless Tubes and Pipes |
|
7304 24 00 |
Seamless Stainless Tubes and Pipes |
|
7304 41 00 |
Seamless Stainless Tubes and Pipes |
|
7304 49 83 |
Seamless Stainless Tubes and Pipes |
|
7304 49 85 |
Seamless Stainless Tubes and Pipes |
|
7304 49 89 |
Seamless Stainless Tubes and Pipes |
|
7304 19 10 |
Other Seamless Tubes |
|
7304 19 30 |
Other Seamless Tubes |
|
7304 19 90 |
Other Seamless Tubes |
|
7304 23 00 |
Other Seamless Tubes |
|
7304 29 10 |
Other Seamless Tubes |
|
7304 29 30 |
Other Seamless Tubes |
|
7304 29 90 |
Other Seamless Tubes |
|
7304 31 20 |
Other Seamless Tubes |
|
7304 31 80 |
Other Seamless Tubes |
|
7304 39 30 |
Other Seamless Tubes |
|
7304 39 50 |
Other Seamless Tubes |
|
7304 39 82 |
Other Seamless Tubes |
|
7304 39 83 |
Other Seamless Tubes |
|
7304 39 88 |
Other Seamless Tubes |
|
7304 51 81 |
Other Seamless Tubes |
|
7304 51 89 |
Other Seamless Tubes |
|
7304 59 82 |
Other Seamless Tubes |
|
7304 59 83 |
Other Seamless Tubes |
|
7304 59 89 |
Other Seamless Tubes |
|
7304 90 00 |
Other Seamless Tubes |
|
7305 11 00 |
Large welded tubes |
|
7305 12 00 |
Large welded tubes |
|
7305 19 00 |
Large welded tubes |
|
7305 20 00 |
Large welded tubes |
|
7305 31 00 |
Large welded tubes |
|
7305 39 00 |
Large welded tubes |
|
7305 90 00 |
Large welded tubes |
|
7306 11 00 |
Other Welded Pipes |
|
7306 19 00 |
Other Welded Pipes |
|
7306 21 00 |
Other Welded Pipes |
|
7306 29 00 |
Other Welded Pipes |
|
7306 30 12 |
Other Welded Pipes |
|
7306 30 18 |
Other Welded Pipes |
|
7306 30 80 |
Other Welded Pipes |
|
7306 40 20 |
Other Welded Pipes |
|
7306 40 80 |
Other Welded Pipes |
|
7306 50 21 |
Other Welded Pipes |
|
7306 50 29 |
Other Welded Pipes |
|
7306 50 80 |
Other Welded Pipes |
|
7306 69 10 |
Other Welded Pipes |
|
7306 69 90 |
Other Welded Pipes |
|
7306 90 00 |
Other Welded Pipes |
|
7215 10 00 |
Non-alloy and other alloy cold finished bars |
|
7215 50 11 |
Non-alloy and other alloy cold finished bars |
|
7215 50 19 |
Non-alloy and other alloy cold finished bars |
|
7215 50 80 |
Non-alloy and other alloy cold finished bars |
|
7228 10 90 |
Non-alloy and other alloy cold finished bars |
|
7228 20 99 |
Non-alloy and other alloy cold finished bars |
|
7228 50 20 |
Non-alloy and other alloy cold finished bars |
|
7228 50 40 |
Non-alloy and other alloy cold finished bars |
|
7228 50 61 |
Non-alloy and other alloy cold finished bars |
|
7228 50 69 |
Non-alloy and other alloy cold finished bars |
|
7228 50 80 |
Non-alloy and other alloy cold finished bars |
|
7217 10 10 |
Non Alloy Wire |
|
7217 10 31 |
Non Alloy Wire |
|
7217 10 39 |
Non Alloy Wire |
|
7217 10 50 |
Non Alloy Wire |
|
7217 10 90 |
Non Alloy Wire |
|
7217 20 10 |
Non Alloy Wire |
|
7217 20 30 |
Non Alloy Wire |
|
7217 20 50 |
Non Alloy Wire |
|
7217 20 90 |
Non Alloy Wire |
|
7217 30 41 |
Non Alloy Wire |
|
7217 30 49 |
Non Alloy Wire |
|
7217 30 50 |
Non Alloy Wire |
|
7217 30 90 |
Non Alloy Wire |
|
7217 90 20 |
Non Alloy Wire |
|
7217 90 50 |
Non Alloy Wire |
|
7217 90 90 |
Non Alloy Wire |
Part B
|
CN/TARIC Codes |
Name of the good |
|
7206 |
iron and non-alloy steel in ingots or other primary forms (excl. remelting scrap ingots, products obtained by continuous casting and iron of heading 7203 ) |
|
7207 |
semi-finished products of iron or non-alloy steel |
|
7208 |
flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, hot-rolled, not clad, plated or coated |
|
7209 |
flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, cold-rolled "cold-reduced", not clad, plated or coated |
|
7210 |
flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, hot-rolled or cold-rolled "cold-reduced", clad, plated or coated |
|
7211 |
flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", not clad, plated or coated |
|
7212 |
flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", clad, plated or coated |
|
7213 |
bars and rods of iron or non-alloy steel, hot-rolled, in irregularly wound coils |
|
7214 |
bars and rods, of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but incl. those twisted after rolling (excl. in irregularly wound coils) |
|
7215 |
bars and rods, of iron or non-alloy steel, cold-formed or cold-finished, whether or not further worked, or hot-formed and further worked, n.e.s. |
|
7216 |
angles, shapes and sections of iron or non-alloy steel, n.e.s. |
|
7217 |
wire of iron or non-alloy steel, in coils (excl. bars and rods) |
|
7218 |
stainless steel in ingots or other primary forms (excl. remelting scrap ingots and products obtained by continuous casting); semi-finished products of stainless steel |
|
7219 |
flat-rolled products of stainless steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" |
|
7220 |
flat-rolled products of stainless steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" |
|
7221 |
bars and rods of stainless steel, hot-rolled, in irregularly wound coils |
|
7222 |
other bars and rods of stainless steel; angles, shapes and sections of stainless steel, n.e.s. |
|
7223 |
wire of stainless steel, in coils (excl. bars and rods) |
|
7224 |
steel, alloy, other than stainless, in ingots or other primary forms, semi-finished products of alloy steel other than stainless (excl. waste and scrap in ingot form, and products obtained by continuous casting) |
|
7225 |
flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" |
|
7226 |
flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" |
|
7227 |
bars and rods of alloy steel other than stainless, hot-rolled, in irregularly wound coils |
|
7228 |
other bars and rods of alloy steel other than stainless, angles, shapes and sections of alloy steel other than stainless, n.e.s.; hollow drill bars and rods, of alloy or non-alloy steel |
|
7229 |
wire of alloy steel other than stainless, in coils (excl. bars and rods) |
|
7301 |
sheet piling of iron or steel, whether or not drilled, punched or made from assembled elements; welded angles, shapes and sections, of iron or steel |
|
7302 |
railway or tramway track construction material of iron or steel, the following : rails, check-rails and rack rails, switch blades, crossing frogs, point rods and other crossing pieces, sleepers "cross-ties", fish-plates, chairs, chair wedges, sole plates "base plates", rail clips, bedplates, ties and other material specialised for jointing or fixing rails |
|
7303 |
tubes, pipes and hollow profiles, of cast iron |
|
7304 |
tubes, pipes and hollow profiles, seamless, of iron or steel (excl. products of cast iron) |
|
7305 |
tubes and pipes, having circular cross-sections and an external diameter of > 406,4 mm, of flat-rolled products of iron or steel "e.g., welded, riveted or similarly closed" |
|
7306 |
tubes, pipes and hollow profiles "e.g., open seam or welded, riveted or similarly closed", of iron or steel (excl. of cast iron, seamless tubes and pipes and tubes having internal and external circular cross-sections and an external diameter of > 406,4 mm) |
|
7307 |
tube or pipe fittings "e.g. couplings, elbows, sleeves", of iron or steel |
|
7308 |
structures and parts of structures "e.g., bridges and bridge-sections, lock-gates, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns", of iron or steel; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of iron or steel (excl. prefabricated buildings of heading 9406 ) |
|
7309 |
reservoirs, tanks, vats and similar containers, of iron or steel, for any material "other than compressed or liquefied gas", of a capacity of > 300 l, not fitted with mechanical or thermal equipment, whether or not lined or heat-insulated (excl. containers specifically constructed or equipped for one or more types of transport) |
|
7310 |
tanks, casks, drums, cans, boxes and similar containers, of iron or steel, for any material "other than compressed or liquefied gas", of a capacity of <= 300 l, not fitted with mechanical or thermal equipment, whether or not lined or heat-insulated, n.e.s. |
|
7311 |
containers of iron or steel, for compressed or liquefied gas (excl. containers specifically constructed or equipped for one or more types of transport) |
|
7312 |
stranded wire, ropes, cables, plaited bands, slings and the like, of iron or steel (excl. electrically insulated products and twisted fencing wire and barbed wire) |
|
7313 |
barbed wire of iron or steel; twisted hoop or single flat wire, barbed or not, and loosely twisted double wire, of a kind used for fencing, of iron or steel |
|
7314 |
cloth, incl. endless bands, grill, netting and fencing, of iron or steel wire, expanded metal of iron or steel (excl. woven products of metal fibres of a kind used for cladding, lining or similar purposes) |
|
7315 |
chain and parts thereof, or iron or steel (excl. watch chains, necklace chains and the like, cutting and saw chain, skid chain, scraper chain for conveyors, toothed chain for textile machinery and the like, safety devices with chains for securing doors, measuring chains) |
|
7316 |
anchors, grapnels and parts thereof, of iron or steel |
|
7317 |
nails, tacks, drawing pins, corrugated nails, staples and similar articles of iron or steel, whether or not with heads of other material (excl. such articles with heads of copper and staples in strips) |
|
7318 |
screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers, incl. spring washers, and similar articles, of iron or steel (excl. lag screws, stoppers, plugs and the like, threaded) |
|
7319 |
sewing needles, knitting needles, bodkins, crochet hooks, embroidery stilettos and similar articles, for use in the hand, of iron or steel; safety pins and other pins of iron or steel, n.e.s. |
|
7320 |
springs and leaves for springs, of iron or steel (excl. clock and watch springs, springs for sticks and handles of umbrellas or parasols, shock absorbers and torque rod or torsion bar springs of section 17) |
|
7321 |
stoves, ranges, grates, cookers, incl. those with subsidiary boilers for central heating, barbecues, braziers, gas rings, plate warmers and similar non-electric domestic appliances, and parts thereof of iron or steel (excl. boilers and radiators for central heating, geysers and hot water cylinders) |
|
7322 |
radiators for central heating, non-electrically heated, and parts thereof, of iron or steel; air heaters and hot-air distributors, incl. distributors which can also distribute fresh or conditioned air, non-electrically heated, incorporating a motor-driven fan or blower, and parts thereof, of iron or steel |
|
7323 |
table, kitchen or other household articles, and parts thereof, of iron or steel; iron or steel wool; pot scourers and scouring or polishing pads, gloves and the like, of iron or steel (excl. cans, boxes and similar containers of heading 7310 ; waste baskets; shovels, corkscrews and other articles of the nature of a work implement; articles of cutlery, spoons, ladles, forks etc. of heading 8211 to 8215 ; ornamental articles; sanitary ware) |
|
7324 |
sanitary ware, and parts thereof, of iron or steel (excl. cans, boxes and similar containers of heading 7310 , small wall cabinets for medical supplies or toiletries and other furniture of chapter 94, and fittings) |
|
7325 |
articles of iron or steel, cast, n.e.s. |
|
7326 |
articles of iron or steel, n.e.s. (excl. cast articles) |
ANNEX XVIII
List of luxury goods referred to in article 3h
EXPLANATORY NOTE
The nomenclature codes are taken from the Combined Nomenclature as defined in Article 1(2) of Council Regulation (EEC) No 2658/87 ( 43 ) and as set out in Annex I thereto, which are valid at the time of publication of this Regulation and mutatis mutandis as amended by subsequent legislation.
(1) Horses
|
ex |
0101 21 00 |
Pure-bred breeding animals |
|
ex |
0101 29 90 |
Other |
(2) Caviar and caviar substitutes
|
ex |
1604 31 00 |
Caviar |
|
ex |
1604 32 00 |
Caviar substitutes |
(3) Truffles and preparations thereof
|
ex |
0709 56 00 |
Truffles |
|
ex |
0710 80 69 |
Other |
|
ex |
0711 59 00 |
Other |
|
ex |
0712 39 00 |
Other |
|
ex |
2001 90 97 |
Other |
|
ex |
2003 90 10 |
Truffles |
|
ex |
2103 90 90 |
Other |
|
ex |
2104 10 00 |
Soups and broths and preparations therefor |
|
ex |
2104 20 00 |
Homogenised composite food preparations |
|
ex |
2106 00 00 |
Food preparations not elsewhere specified or included |
(4) Wines (including sparkling wines), beers, spirits and spirituous beverages
|
ex |
2203 00 00 |
Beer made from malt |
|
ex |
2204 10 11 |
Champagne |
|
ex |
2204 10 91 |
Asti spumante |
|
ex |
2204 10 93 |
Other |
|
ex |
2204 10 94 |
With a protected geographical indication (PGI) |
|
ex |
2204 10 96 |
Other varietal wines |
|
ex |
2204 10 98 |
Other |
|
ex |
2204 21 00 |
In containers holding 2 litres or less |
|
ex |
2204 29 00 |
Other |
|
ex |
2205 00 00 |
Vermouth and other wine of fresh grapes flavoured with plants or aromatic substances |
|
ex |
2206 00 00 |
Other fermented beverages (for example, cider, perry, mead, saké); mixtures of fermented beverages and mixtures of fermented beverages with non-alcoholic beverages, not elsewhere specified or included |
|
ex |
2207 10 00 |
Undenatured ethyl alcohol of an alcoholic strength by volume of 80 % vol or higher |
|
ex |
2208 00 00 |
Undenatured ethyl alcohol of an alcoholic strength by volume of less than 80 % vol; spirits, liqueurs and other spirituous beverages |
(5) Cigars and cigarillos
|
ex |
2402 10 00 |
Cigars, cheroots and cigarillos, containing tobacco |
|
ex |
2402 90 00 |
Other |
(6) Perfumes, toilet waters and cosmetics, including beauty and make-up products
|
ex |
3303 |
Perfumes and toilet waters |
|
ex |
3304 00 00 |
Beauty or make-up preparations and preparations for the care of the skin (other than medicaments), including sunscreen or suntan preparations; manicure or pedicure preparations |
|
ex |
3305 00 00 |
Preparations for use on the hair |
|
ex |
3307 00 00 |
Pre-shave, shaving or aftershave preparations, personal deodorants, bath preparations, depilatories and other perfumery, cosmetic or toilet preparations, not elsewhere specified or included; prepared room deodorisers, whether or not perfumed or having disinfectant properties |
|
ex |
6704 00 00 |
Wigs, false beards, eyebrows and eyelashes, switches and the like, of human or animal hair or of textile materials; articles of human hair not elsewhere specified or included |
(7) Leather, saddlery and travel goods, handbags and similar articles
|
ex |
4201 00 00 |
Saddlery and harness for any animal (including traces, leads, knee pads, muzzles, saddle-cloths, saddlebags, dog coats and the like), of any material |
|
ex |
4202 00 00 |
Trunks, suitcases, vanity cases, executive-cases, briefcases, school satchels, spectacle cases, binocular cases, camera cases, musical instrument cases, gun cases, holsters and similar containers; travelling-bags, insulated food or beverages bags, toilet bags, rucksacks, handbags, shopping-bags, wallets, purses, map-cases, cigarette-cases, tobacco-pouches, tool bags, sports bags, bottle-cases, jewellery boxes, powder boxes, cutlery cases and similar containers, of leather or of composition leather, of sheeting of plastics, of textile materials, of vulcanised fibre or of paperboard, or wholly or mainly covered with such materials or with paper |
|
ex |
4205 00 90 |
Other |
|
ex |
9605 00 00 |
Travel sets for personal toilet, sewing or shoe or clothes cleaning |
(8) Coats, or other garments, clothing accessories and shoes (regardless of their material)
|
ex |
4203 00 00 |
Articles of apparel and clothing accessories, of leather or of composition leather |
|
ex |
4303 00 00 |
Articles of apparel, clothing accessories and other articles of furskin |
|
ex |
6101 00 00 |
Men's or boys' overcoats, car coats, capes, cloaks, anoraks (including ski jackets), windcheaters, wind-jackets and similar articles, knitted or crocheted, other than those of heading 6103 |
|
ex |
6102 00 00 |
Women's or girls' overcoats, car coats, capes, cloaks, anoraks (including ski jackets), windcheaters, wind-jackets and similar articles, knitted or crocheted, other than those of heading 6104 |
|
ex |
6103 00 00 |
Men's or boys' suits, ensembles, jackets, blazers, trousers, bib and brace overalls, breeches and shorts (other than swimwear), knitted or crocheted |
|
ex |
6104 00 00 |
Women's or girls' suits, ensembles, jackets, blazers, dresses, skirts, divided skirts, trousers, bib and brace overalls, breeches and shorts (other than swimwear), knitted or crocheted |
|
ex |
6105 00 00 |
Men's or boys' shirts, knitted or crocheted |
|
ex |
6106 00 00 |
Women's or girls' blouses, shirts and shirt-blouses, knitted or crocheted |
|
ex |
6107 00 00 |
Men's or boys' underpants, briefs, nightshirts, pyjamas, bathrobes, dressing gowns and similar articles, knitted or crocheted |
|
ex |
6108 00 00 |
Women's or girls' slips, petticoats, briefs, panties, nightdresses, pyjamas, négligés, bathrobes, dressing gowns and similar articles, knitted or crocheted |
|
ex |
6109 00 00 |
T-shirts, singlets and other vests, knitted or crocheted |
|
ex |
6110 00 00 |
Jerseys, pullovers, cardigans, waistcoats and similar articles, knitted or crocheted |
|
ex |
6111 00 00 |
Babies' garments and clothing accessories, knitted or crocheted |
|
ex |
6112 11 00 |
Of cotton |
|
ex |
6112 12 00 |
Of synthetic fibres |
|
ex |
6112 19 00 |
Of other textile materials |
|
ex |
6112 20 00 |
Ski suits |
|
ex |
6112 31 00 |
Of synthetic fibres |
|
ex |
6112 39 00 |
Of other textile materials |
|
ex |
6112 41 00 |
Of synthetic fibres |
|
ex |
6112 49 00 |
Of other textile materials |
|
ex |
6113 00 10 |
Of knitted or crocheted fabrics of heading 5906 |
|
ex |
6113 00 90 |
Other |
|
ex |
6114 00 00 |
Other garments, knitted or crocheted |
|
ex |
6115 00 00 |
Pantyhose, tights, stockings, socks and other hosiery, including graduated compression hosiery (for example, stockings for varicose veins) and footwear without applied soles, knitted or crocheted |
|
ex |
6116 00 00 |
Gloves, mittens and mitts, knitted or crocheted |
|
ex |
6117 00 00 |
Other made-up clothing accessories, knitted or crocheted; knitted or crocheted parts of garments or of clothing accessories |
|
ex |
6201 00 00 |
Men's or boys' overcoats, car coats, capes, cloaks, anoraks (including ski jackets), windcheaters, wind-jackets and similar articles, other than those of heading 6203 |
|
ex |
6202 00 00 |
Women's or girls' overcoats, car coats, capes, cloaks, anoraks (including ski jackets), windcheaters, wind-jackets and similar articles, other than those of heading 6204 |
|
ex |
6203 00 00 |
Men's or boys' suits, ensembles, jackets, blazers, trousers, bib and brace overalls, breeches and shorts (other than swimwear) |
|
ex |
6204 00 00 |
Women's or girls. suits, ensembles, jackets, blazers, dresses, skirts, divided skirts, trousers, bib and brace overalls, breeches and shorts (other than swimwear) |
|
ex |
6205 00 00 |
Men's or boys' shirts |
|
ex |
6206 00 00 |
Women's or girls' blouses, shirts and shirt-blouses |
|
ex |
6207 00 00 |
Men's or boys' singlets and other vests, underpants, briefs, nightshirts, pyjamas, bathrobes, dressing gowns and similar articles |
|
ex |
6208 00 00 |
Women's or girls' singlets and other vests, slips, petticoats, briefs, panties, nightdresses, pyjamas, négligés, bathrobes, dressing gowns and similar articles |
|
ex |
6209 00 00 |
Babies' garments and clothing accessories |
|
ex |
6210 10 00 |
Of fabrics of heading 5602 or 5603 |
|
ex |
6210 20 00 |
Other garments, of the type described in subheadings 6201 11 to 6201 19 |
|
ex |
6210 30 00 |
Other garments, of the type described in subheadings 6202 11 to 6202 19 |
|
ex |
6210 40 00 |
Other men's or boys' garments |
|
ex |
6210 50 00 |
Other women's or girls' garments |
|
ex |
6211 11 00 |
Men's or boys' |
|
ex |
6211 12 00 |
Women's or girls' |
|
ex |
6211 20 00 |
Ski suits |
|
ex |
6211 32 00 |
Of cotton |
|
ex |
6211 33 00 |
Of man-made fibres |
|
ex |
6211 39 00 |
Of other textile materials |
|
ex |
6211 42 00 |
Of cotton |
|
ex |
6211 43 00 |
Of man-made fibres |
|
ex |
6211 49 00 |
Of other textile materials |
|
ex |
6212 00 00 |
Brassières, girdles, corsets, braces, suspenders, garters and similar articles and parts thereof, whether or not knitted or crocheted |
|
ex |
6213 00 00 |
Handkerchiefs |
|
ex |
6214 00 00 |
Shawls, scarves, mufflers, mantillas, veils and the like |
|
ex |
6215 00 00 |
Ties, bow ties and cravats |
|
ex |
6216 00 00 |
Gloves, mittens and mitts |
|
ex |
6217 00 00 |
Other made-up clothing accessories; parts of garments or of clothing accessories, other than those of heading 6212 |
|
ex |
6401 00 00 |
Waterproof footwear with outer soles and uppers of rubber or of plastics, the uppers of which are neither fixed to the sole nor assembled by stitching, riveting, nailing, screwing, plugging or similar processes |
|
ex |
6402 20 00 |
Footwear with upper straps or thongs assembled to the sole by means of plugs |
|
ex |
6402 91 00 |
Covering the ankle |
|
ex |
6402 99 00 |
Other |
|
ex |
6403 19 00 |
Other |
|
ex |
6403 20 00 |
Footwear with outer soles of leather, and uppers which consist of leather straps across the instep and around the big toe |
|
ex |
6403 40 00 |
Other footwear, incorporating a protective metal toecap |
|
ex |
6403 51 00 |
Covering the ankle |
|
ex |
6403 59 00 |
Other |
|
ex |
6403 91 00 |
Covering the ankle |
|
ex |
6403 99 00 |
Other |
|
ex |
6404 19 10 |
Slippers and other indoor footwear |
|
ex |
6404 20 00 |
Footwear with outer soles of leather or composition leather |
|
ex |
6405 00 00 |
Other footwear |
|
ex |
6504 00 00 |
Hats and other headgear, plaited or made by assembling strips of any material, whether or not lined or trimmed |
|
ex |
6505 00 10 |
Of fur felt or of felt of wool and fur, made from the hat bodies, hoods or plateaux of heading 6501 00 00 |
|
ex |
6505 00 30 |
Peaked caps |
|
ex |
6505 00 90 |
Other |
|
ex |
6506 99 00 |
Of other materials |
|
ex |
6601 91 00 |
Having a telescopic shaft |
|
ex |
6601 99 00 |
Other |
|
ex |
6602 00 00 |
Walking sticks, seat-sticks, whips, riding-crops and the like |
|
ex |
9619 00 81 |
Napkins and napkin liners for babies |
(9) Carpets, rugs and tapestries, hand-made or not
|
ex |
5701 00 00 |
Carpets and other textile floor coverings, knotted, whether or not made up |
|
ex |
5702 10 00 |
‘Kelem’, ‘Schumacks’, ‘Karamanie’ and similar hand-woven rugs |
|
ex |
5702 20 00 |
Floor coverings of coconut fibres (coir) |
|
ex |
5702 31 80 |
Other |
|
ex |
5702 32 00 |
Of man-made textile materials |
|
ex |
5702 39 00 |
Of other textile materials |
|
ex |
5702 41 90 |
Other |
|
ex |
5702 42 00 |
Of man-made textile materials |
|
ex |
5702 50 00 |
Other, not of pile construction, not made up |
|
ex |
5702 91 00 |
Of wool or fine animal hair |
|
ex |
5702 92 00 |
Of man-made textile materials |
|
ex |
5702 99 00 |
Of other textile materials |
|
ex |
5703 00 00 |
Carpets and other textile floor coverings, tufted, whether or not made up |
|
ex |
5704 00 00 |
Carpets and other textile floor coverings, of felt, not tufted or flocked, whether or not made up |
|
ex |
5705 00 00 |
Other carpets and other textile floor coverings, whether or not made up |
|
ex |
5805 00 00 |
Hand-woven tapestries of the type Gobelins, Flanders, Aubusson, Beauvais and the like, and needle-worked tapestries (for example, petit point, cross stitch), whether or not made up |
(10) Pearls, precious and semi-precious stones, articles of pearls, jewellery, gold- or silversmith articles
|
ex |
7101 00 00 |
Pearls, natural or cultured, whether or not worked or graded but not strung, mounted or set; pearls, natural or cultured, temporarily strung for convenience of transport |
|
ex |
7102 00 00 |
Diamonds, whether or not worked, but not mounted or set, excluding for industrial use |
|
ex |
7103 00 00 |
Precious stones (other than diamonds) and semi-precious stones, whether or not worked or graded but not strung, mounted or set; ungraded precious stones (other than diamonds) and semi-precious stones, temporarily strung for convenience of transport |
|
ex |
7104 91 00 |
Diamonds, excluding for industrial use |
|
ex |
7105 00 00 |
Dust and powder of natural or synthetic precious or semi-precious stones excluding for industrial use |
|
ex |
7106 00 00 |
Silver (including silver plated with gold or platinum), unwrought or in semi-manufactured forms, or in powder form |
|
ex |
7107 00 00 |
Base metals clad with silver, not further worked than semi-manufactured |
|
ex |
7108 00 00 |
Gold (including gold plated with platinum), unwrought or in semi-manufactured forms, or in powder form |
|
ex |
7109 00 00 |
Base metals or silver, clad with gold, not further worked than semi-manufactured |
|
ex |
7110 11 00 |
Platinum, unwrought or in powder form |
|
ex |
7110 19 00 |
Platinum, other than unwrought or in powder form |
|
ex |
7110 21 00 |
Palladium, unwrought or in powder form |
|
ex |
7110 29 00 |
Palladium, other than unwrought or in powder form |
|
ex |
7110 31 00 |
Rhodium, unwrought or in powder form |
|
ex |
7110 39 00 |
Rhodium, other than unwrought or in powder form |
|
ex |
7110 41 00 |
Iridium, osmium and ruthenium, unwrought or in powder form |
|
ex |
7110 49 00 |
Iridium, osmium and ruthenium, other than unwrought or in powder form |
|
ex |
7111 00 00 |
Base metals, silver or gold, clad with platinum, not further worked than semi-manufactured |
|
ex |
7113 00 00 |
Articles of jewellery and parts thereof, of precious metal or of metal clad with precious metal |
|
ex |
7114 00 00 |
Articles of goldsmiths’ or silversmiths’ wares and parts thereof, of precious metal or of metal clad with precious metal |
|
ex |
7115 00 00 |
Other articles of precious metal or of metal clad with precious metal |
|
ex |
7116 00 00 |
Articles of natural or cultured pearls, precious or semi-precious stones (natural, synthetic or reconstructed) |
(11) Coins and banknotes, not being legal tender
|
ex |
4907 00 30 |
Banknotes |
|
ex |
7118 10 00 |
Coin (other than gold coin), not being legal tender |
|
ex |
7118 90 00 |
Other |
(12) Cutlery of precious metal or plated or clad with precious metal
|
ex |
7114 00 00 |
Articles of goldsmiths' or silversmiths' wares and parts thereof, of precious metal or of metal clad with precious metal |
|
ex |
7115 00 00 |
Other articles of precious metal or of metal clad with precious metal |
|
ex |
8214 00 00 |
Other articles of cutlery (for example, hair clippers, butchers' or kitchen cleavers, choppers and mincing knives, paperknives); manicure or pedicure sets and instruments (including nail files) |
|
ex |
8215 00 00 |
Spoons, forks, ladles, skimmers, cake-servers, fish-knives, butter-knives, sugar tongs and similar kitchen or tableware |
|
ex |
9307 00 00 |
Swords, cutlasses, bayonets, lances and similar arms and parts thereof and scabbards and sheaths therefor |
(13) Tableware of porcelain, china, stone- or earthenware or fine pottery
|
ex |
6911 00 00 |
Tableware, kitchenware, other household articles and toilet articles, of porcelain or china |
|
ex |
6912 00 23 |
Stoneware |
|
ex |
6912 00 25 |
Earthenware or fine pottery |
|
ex |
6912 00 83 |
Stoneware |
|
ex |
6912 00 85 |
Earthenware or fine pottery |
|
ex |
6914 10 00 |
Of porcelain or china |
|
ex |
6914 90 00 |
Other |
(14) Items of lead crystal
|
ex |
7009 91 00 |
Unframed |
|
ex |
7009 92 00 |
Framed |
|
ex |
7010 00 00 |
Carboys, bottles, flasks, jars, pots, phials, ampoules and other containers, of glass, of a kind used for the conveyance or packing of goods; preserving jars of glass; stoppers, lids and other closures, of glass |
|
ex |
7013 22 00 |
Of lead crystal |
|
ex |
7013 33 00 |
Of lead crystal |
|
ex |
7013 41 00 |
Of lead crystal |
|
ex |
7013 91 00 |
Of lead crystal |
|
ex |
7018 10 00 |
Glass beads, imitation pearls, imitation precious or semi-precious stones and similar glass smallwares |
|
ex |
7018 90 00 |
Other |
|
ex |
7020 00 80 |
Other |
|
ex |
9405 50 00 |
Non-electrical lamps and lighting fittings |
|
ex |
9405 91 00 |
Of glass |
(15) Electronic items for domestic use of a value exceeding EUR 750
|
ex |
8414 51 |
Table, floor, wall, window, ceiling or roof fans, with a self-contained electric motor of an output not exceeding 125 W |
|
ex |
8414 59 00 |
Other |
|
ex |
8414 60 00 |
Hoods having a maximum horizontal side not exceeding 120 cm |
|
ex |
8415 10 00 |
Window or wall types, self-contained or ‘split-system’ |
|
ex |
8418 10 00 |
Combined refrigerator-freezers, fitted with separate external doors |
|
ex |
8418 21 00 |
Compression-type |
|
ex |
8418 29 00 |
Other |
|
ex |
8418 30 00 |
Freezers of the chest type, not exceeding 800 litres capacity |
|
ex |
8418 40 00 |
Freezers of the upright type, not exceeding 900 litres capacity |
|
ex |
8419 81 00 |
For making hot drinks or for cooking or heating food |
|
ex |
8422 11 00 |
Of the household type |
|
ex |
8423 10 00 |
Personal weighing machines, including baby scales; household scales |
|
ex |
8443 12 00 |
Offset printing machinery, sheet fed, office type (using sheets with one side not exceeding 22 cm and the other side not exceeding 36 cm in the unfolded state) |
|
ex |
8443 31 00 |
Machines which perform two or more of the functions of printing, copying or facsimile transmission, capable of connecting to an automatic data-processing machine or to a network |
|
ex |
8443 32 00 |
Other, capable of connecting to an automatic data-processing machine or to a network |
|
ex |
8443 39 00 |
Other |
|
ex |
8450 11 00 |
Fully-automatic machines |
|
ex |
8450 12 00 |
Other machines, with built-in centrifugal drier |
|
ex |
8450 19 00 |
Other |
|
ex |
8451 21 00 |
Each of a dry linen capacity not exceeding 10 kg |
|
ex |
8452 10 00 |
Sewing machines of the household type |
|
ex |
8470 10 00 |
Electronic calculators capable of operation without an external source of electric power and pocket-size data-recording, reproducing and displaying machines with calculating functions |
|
ex |
8470 21 00 |
Incorporating a printing device |
|
ex |
8470 29 00 |
Other |
|
ex |
8470 30 00 |
Other calculating machines |
|
ex |
8471 00 00 |
Automatic data-processing machines and units thereof; magnetic or optical readers, machines for transcribing data onto data media in coded form and machines for processing such data, not elsewhere specified or included |
|
ex |
8472 90 80 |
Other |
|
ex |
8479 60 00 |
Evaporative air coolers |
|
ex |
8508 11 00 |
Of a power not exceeding 1 500 W and having a dust bag or other receptacle capacity not exceeding 20 l |
|
ex |
8508 19 00 |
Other |
|
ex |
8508 60 00 |
Other vacuum cleaners |
|
ex |
8509 80 00 |
Other appliances |
|
ex |
8516 31 00 |
Hairdryers |
|
ex |
8516 50 00 |
Microwave ovens |
|
ex |
8516 60 10 |
Cookers (incorporating at least an oven and a hob) |
|
ex |
8516 71 00 |
Coffee or tea makers |
|
ex |
8516 72 00 |
Toasters |
|
ex |
8516 79 00 |
Other |
|
ex |
8517 11 00 |
Line telephone sets with cordless handsets |
|
ex |
8517 13 00 |
Smartphones |
|
ex |
8517 18 00 |
Other |
|
ex |
8517 61 00 |
Base stations |
|
ex |
8517 62 00 |
Machines for the reception, conversion and transmission or regeneration of voice, images or other data, including switching and routing apparatus |
|
ex |
8517 69 00 |
Other |
|
ex |
8526 91 00 |
Radio navigational aid apparatus |
|
ex |
8529 10 65 |
Inside aerials for radio or television broadcast receivers, including built-in types |
|
ex |
8529 10 69 |
Other |
|
ex |
8531 10 00 |
Burglar or fire alarms and similar apparatus |
|
ex |
8543 70 10 |
Electrical machines with translation or dictionary functions |
|
ex |
8543 70 30 |
Aerial amplifiers |
|
ex |
8543 70 50 |
Sunbeds, sunlamps and similar suntanning equipment |
|
ex |
8543 70 90 |
Other |
|
ex |
9504 50 00 |
Video game consoles and machines, other than those of subheading 9504 30 |
|
ex |
9504 90 80 |
Other |
(16) Electrical/electronic or optical apparatus for recording and reproducing sound and images of a value exceeding EUR 1 000
|
ex |
8519 00 00 |
Sound recording or sound reproducing apparatus |
|
ex |
8521 00 00 |
Video recording or reproducing apparatus, whether or not incorporating a video tuner |
|
ex |
8527 00 00 |
Reception apparatus for radio-broadcasting, whether or not combined, in the same housing, with sound recording or reproducing apparatus or a clock |
|
ex |
8528 71 00 |
Not designed to incorporate a video display or screen |
|
ex |
8528 72 00 |
Other, colour |
|
ex |
9006 00 00 |
Photographic (other than cinematographic) cameras; photographic flashlight apparatus and flashbulbs other than discharge lamps of heading 8539 |
|
ex |
9007 00 00 |
Cinematographic cameras and projectors, whether or not incorporating sound recording or reproducing apparatus |
(17) Vehicles, except ambulances, for the transport of persons on earth, air or sea of a value exceeding EUR 50 000 each, teleferics, chairlifts, ski-draglines, traction mechanisms for funiculars, motorbikes of a value exceeding EUR 5 000 each, as well as their accessories and spare parts
|
ex |
4011 10 00 |
Of a kind used on motor cars (including station wagons and racing cars) |
|
ex |
4011 20 00 |
Of a kind used on buses or lorries |
|
ex |
4011 30 00 |
Of a kind used on aircraft |
|
ex |
4011 40 00 |
Of a kind used on motorcycles |
|
ex |
4011 90 00 |
Other |
|
ex |
7009 10 00 |
Rear-view mirrors for vehicles |
|
ex |
8407 00 00 |
Spark-ignition reciprocating or rotary internal combustion piston engines |
|
ex |
8408 00 00 |
Compression-ignition internal combustion piston engines (diesel or semi-diesel engines) |
|
ex |
8409 00 00 |
Parts suitable for use solely or principally with the engines of heading 8407 or 8408 |
|
ex |
8411 00 00 |
Turbojets, turbopropellers and other gas turbines |
|
|
8428 60 00 |
Teleferics, chairlifts, ski-draglines, traction mechanisms for funiculars |
|
ex |
8431 39 00 |
Parts and acccessories of teleferics, chairlifts, ski-draglines, traction mechanisms for funiculars |
|
ex |
8483 00 00 |
Transmission shafts (including cam shafts and crank shafts) and cranks; bearing housings and plain shaft bearings; gears and gearing; ball or roller screws; gear boxes and other speed changers, including torque converters; flywheels and pulleys, including pulley blocks; clutches and shaft couplings (including universal joints) |
|
ex |
8511 00 00 |
Electrical ignition or starting equipment of a kind used for spark-ignition or compression-ignition internal combustion engines (for example, ignition magnetos, magneto-dynamos, ignition coils, sparking plugs and glow plugs, starter motors); generators (for example, dynamos, alternators) and cut-outs of a kind used in conjunction with such engines |
|
ex |
8512 20 00 |
Other lighting or visual signalling equipment |
|
ex |
8512 30 10 |
Burglar alarms of a kind used for motor vehicles |
|
ex |
8512 30 90 |
Other |
|
ex |
8512 40 00 |
Windscreen wipers, defrosters and demisters |
|
ex |
8544 30 00 |
Ignition wiring sets and other wiring sets of a kind used in vehicles, aircraft or ships |
|
ex |
8603 00 00 |
Self-propelled railway or tramway coaches, vans and trucks, other than those of heading 8604 |
|
ex |
8605 00 00 |
Railway or tramway passenger coaches, not self-propelled; luggage vans, post office coaches and other special purpose railway or tramway coaches, not self-propelled (excluding those of heading 8604 ) |
|
ex |
8607 00 00 |
Parts of railway or tramway locomotives or rolling stock |
|
ex |
8702 00 00 |
Motor vehicles for the transport of ten or more persons, including the driver |
|
ex |
8703 00 00 |
Motor cars and other motor vehicles principally designed for the transport of persons (other than those of heading 8702 ), including station wagons and racing cars, including snowmobiles |
|
ex |
8706 00 00 |
Chassis fitted with engines, for the motor vehicles of headings 8701 to 8705 |
|
ex |
8707 00 00 |
Bodies (including cabs), for the motor vehicles of headings 8701 to 8705 |
|
ex |
8708 00 00 |
Parts and accessories of the motor vehicles of headings 8701 to 8705 |
|
ex |
8711 00 00 |
Motorcycles (including mopeds) and cycles fitted with an auxiliary motor, with or without side-cars; side-cars |
|
ex |
8712 00 00 |
Bicycles and other cycles (including delivery tricycles), not motorised |
|
ex |
8714 00 00 |
Parts and accessories of vehicles of headings 8711 to 8713 |
|
ex |
8716 10 00 |
Trailers and semi-trailers of the caravan type, for housing or camping |
|
ex |
8716 40 00 |
Other trailers and semi-trailers |
|
ex |
8716 90 00 |
Parts |
|
ex |
8901 10 00 |
Cruise ships, excursion boats and similar vessels principally designed for the transport of persons; ferry-boats of all kinds |
|
ex |
8901 90 00 |
Other vessels for the transport of goods and other vessels for the transport of both persons and goods |
|
ex |
8903 00 00 |
Yachts and other vessels for pleasure or sports; rowing boats and canoes |
(18) Clocks and watches and their parts
|
ex |
9101 00 00 |
Wristwatches, pocket-watches and other watches, including stopwatches, with case of precious metal or of metal clad with precious metal |
|
ex |
9102 00 00 |
Wristwatches, pocket-watches and other watches, including stopwatches, other than those of heading 9101 |
|
ex |
9103 00 00 |
Clocks with watch movements, excluding clocks of heading 9104 |
|
ex |
9104 00 00 |
Instrument panel clocks and clocks of a similar type for vehicles, aircraft, spacecraft or vessels |
|
ex |
9105 00 00 |
Other clocks |
|
ex |
9108 00 00 |
Watch movements, complete and assembled |
|
ex |
9109 00 00 |
Clock movements, complete and assembled |
|
ex |
9110 00 00 |
Complete watch or clock movements, unassembled or partly assembled (movement sets); incomplete watch or clock movements, assembled; rough watch or clock movements |
|
ex |
9111 00 00 |
Watch cases and parts thereof |
|
ex |
9112 00 00 |
Clock cases and cases of a similar type for other goods of this chapter, and parts thereof |
|
ex |
9113 00 00 |
Watch straps, watch bands and watch bracelets, and parts thereof |
|
ex |
9114 00 00 |
Other clock or watch parts |
(19) Musical instruments of a value exceeding EUR 1 500
|
ex |
9201 00 00 |
Pianos, including automatic pianos; harpsichords and other keyboard stringed instruments |
|
ex |
9202 00 00 |
Other string musical instruments (for example, guitars, violins, harps) |
|
ex |
9205 00 00 |
Wind musical instruments (for example, keyboard pipe organs, accordions, clarinets, trumpets, bagpipes), other than fairground organs and mechanical street organs |
|
ex |
9206 00 00 |
Percussion musical instruments (for example, drums, xylophones, cymbals, castanets, maracas) |
|
ex |
9207 00 00 |
Musical instruments, the sound of which is produced, or must be amplified, electrically (for example, organs, guitars, accordions) |
(20) Works of art, collectors' pieces and antiques
|
ex |
9700 |
Works of art, collectors' pieces and antiques |
(21) Articles and equipment for sports, including skiing, golf, diving and water sports
|
ex |
4015 19 00 |
Other |
|
ex |
4015 90 00 |
Other |
|
ex |
6210 40 00 |
Other men's or boys' garments |
|
ex |
6210 50 00 |
Other women's or girls' garments |
|
ex |
6211 11 00 |
Men's or boys' |
|
ex |
6211 12 00 |
Women's or girls' |
|
ex |
6211 20 00 |
Ski suits |
|
ex |
6216 00 00 |
Gloves, mittens and mitts |
|
ex |
6402 12 00 |
Ski-boots, cross-country ski footwear and snowboard boots |
|
ex |
6402 19 00 |
Other |
|
ex |
6403 12 00 |
Ski-boots, cross-country ski footwear and snowboard boots |
|
ex |
6403 19 00 |
Other |
|
ex |
6404 11 00 |
Sports footwear; tennis shoes, basketball shoes, gym shoes, training shoes and the like |
|
ex |
6404 19 90 |
Other |
|
ex |
9004 90 00 |
Other |
|
ex |
9020 00 00 |
Other breathing appliances and gas masks, excluding protective masks having neither mechanical parts nor replaceable filters |
|
ex |
9506 11 00 |
Skis |
|
ex |
9506 12 00 |
Ski-fastenings (ski-bindings) |
|
ex |
9506 19 00 |
Other |
|
ex |
9506 21 00 |
Sailboards |
|
ex |
9506 29 00 |
Other |
|
ex |
9506 31 00 |
Clubs, complete |
|
ex |
9506 32 00 |
Golf balls |
|
ex |
9506 39 00 |
Other |
|
ex |
9506 40 00 |
Articles and equipment for table tennis |
|
ex |
9506 51 00 |
Lawn-tennis rackets, whether or not strung |
|
ex |
9506 59 00 |
Other |
|
ex |
9506 61 00 |
Lawn-tennis balls |
|
ex |
9506 69 10 |
Cricket and polo balls |
|
ex |
9506 69 90 |
Other |
|
ex |
9506 70 |
Ice skates and roller skates, including skating boots with skates attached |
|
ex |
9506 91 |
Articles and equipment for general physical exercise, gymnastics or athletics |
|
ex |
9506 99 10 |
Cricket and polo equipment, other than balls |
|
ex |
9506 99 90 |
Other |
|
ex |
9507 00 00 |
Fishing rods, fish-hooks and other line fishing tackle; fish landing nets, butterfly nets and similar nets; decoy ‘birds’ (other than those of heading 9208 or 9705 ) and similar hunting or shooting requisites |
(22) Articles and equipment for billiard, automatic bowling, casino games and games operated by coins or banknotes
|
ex |
9504 20 00 |
Articles and accessories for billiards of all kinds |
|
ex |
9504 30 00 |
Other games, operated by coins, banknotes, bank cards, tokens or by any other means of payment, other than automatic bowling alley equipment |
|
ex |
9504 40 00 |
Playing cards |
|
ex |
9504 50 00 |
Video game consoles and machines, other than those of subheading 9504 30 |
|
ex |
9504 90 80 |
Other |
(23) Optical articles and equipment of any value
|
ex |
9004 90 90 |
Night Vision Equipment, or Thermal Sight Equipment |
|
|
9005 10 00 |
Binoculars |
|
ex |
9005 80 00 |
Spotting Scopes |
|
ex |
9013 10 90 |
Telescopic sights |
|
ex |
9013 10 90 |
Optical Weapon Sights |
|
ex |
9013 10 90 |
Weapon Sights with Thermal Vision Enhancement |
|
ex |
9013 80 90 |
Red Dot Sights |
|
|
9015 10 00 |
Range Finders |
ANNEX XIX
List of legal persons, entities and bodies referred to in Article 5aa
Part A
OPK OBORONPROM
UNITED AIRCRAFT CORPORATION
URALVAGONZAVOD
ROSNEFT
TRANSNEFT
GAZPROM NEFT
ALMAZ-ANTEY
KAMAZ
ROSTEC (RUSSIAN TECHNOLOGIES STATE CORPORATION)
JSC PO SEVMASH
SOVCOMFLOT
UNITED SHIPBUILDING CORPORATION
Part B
RUSSIAN MARITIME REGISTER of SHIPPING (RMRS)
ANNEX XX
List of jet fuel and fuel additives as referred to in article 3c
|
CN/TARIC Code |
Name of the good |
|
|
Jet fuel (other than kerosene): |
|
2710 12 70 |
Spirit type jet fuel (light oils) |
|
2710 19 29 |
Other than kerosene (medium oils) |
|
2710 19 21 |
Kerosene type jet fuel (medium oils) |
|
2710 20 90 |
Kerosene type jet fuel blended with biodiesel (1) |
|
|
Oxidation inhibitors Oxidation inhibitors used in additives for lubricating oils: |
|
3811 21 00 |
— oxidation inhibitors containing petroleum oils |
|
3811 29 00 |
— other oxidation inhibitors |
|
3811 90 00 |
Oxidation inhibitors used for other liquids used for the same purpose as mineral oils |
|
|
Static dissipater additives Static dissipater additives for lubricating oils: |
|
3811 21 00 |
— containing petroleum oils |
|
3811 29 00 |
— other |
|
3811 90 00 |
Static dissipater additives for other liquids used for the same purpose as mineral oils |
|
|
Corrosion inhibitors Corrosion inhibitors for lubricating oils: |
|
3811 21 00 |
— containing petroleum oils |
|
3811 29 00 |
— other |
|
3811 90 00 |
Corrosion inhibitors for other liquids used for the same purpose as mineral oils |
|
|
Fuel system icing inhibitors (anti-icing additives) Fuel system icing inhibitors for lubricating oils: |
|
3811 21 00 |
— containing petroleum oils |
|
3811 29 00 |
— other |
|
3811 90 00 |
Fuel system icing inhibitors for other liquids used for the same purpose as mineral oils |
|
|
Metal de-activators Metal de-activators for lubricating oils: |
|
3811 21 00 |
— containing petroleum oils |
|
3811 29 00 |
— other |
|
3811 90 00 |
Metal de-activator for other liquids used for the same purpose as mineral oils |
|
|
Biocide additives Biocide additives for lubricating oils: |
|
3811 21 00 |
— containing petroleum oils |
|
3811 29 00 |
— other |
|
3811 90 00 |
Biocide additives for other liquids used for the same purpose as mineral oils |
|
|
Thermal stability improver additives Thermal stability improver for lubricating oils: |
|
3811 21 00 |
— containing petroleum oils |
|
3811 29 00 |
— other |
|
3811 90 00 |
Thermal stability improver for other liquids used for the same purpose as mineral oils |
|
(1)
Provided it still contains 70 % or more by weight of petroleum oils or bituminous mineral oils. |
|
ANNEX XXI
List of goods and technology referred to in Article 3i
Part A
|
CN code |
Name of the good |
|
0306 |
Crustaceans, whether in shell or not, live, fresh, chilled, frozen, dried, salted or in brine; smoked crustaceans, whether in shell or not, whether or not cooked before or during the smoking process; crustaceans, in shell, cooked by steaming or by boiling in water, whether or not chilled, frozen, dried, salted or in brine |
|
1604 31 00 |
Caviar |
|
1604 32 00 |
Caviar substitutes |
|
2208 |
Undenatured ethyl alcohol of an alcoholic strength by volume of less than 80 % vol; spirits, liqueurs and other spirituous beverages |
|
2303 |
Residues of starch manufacture and similar residues, beet-pulp, bagasse and other waste of sugar manufacture, brewing or distilling dregs and waste, whether or not in the form of pellets |
|
2523 |
Portland cement, aluminous cement, slag cement, supersulphate cement and similar hydraulic cements, whether or not coloured or in the form of clinkers |
|
ex 28 25 |
Hydrazine and hydroxylamine and their inorganic salts; other inorganic bases; other metal oxides, hydroxides and peroxides, except for CN codes 2825 20 00 and 2825 30 00 |
|
ex 28 35 |
Phosphinates (hypophosphites), phosphonates (phosphites) and phosphates; polyphosphates, whether or not chemically defined, except for CN code 2835 26 00 |
|
ex 29 01 |
Acyclic hydrocarbons, except for CN code 2901 10 00 |
|
2902 |
Cyclic hydrocarbons |
|
ex 29 05 |
Acyclic alcohols and their halogenated, sulphonated, nitrated or nitrosated derivatives, except for CN code 2905 11 00 |
|
2907 |
Phenols; phenol-alcohols |
|
2909 |
Ethers, ether-alcohols, ether-phenols, ether-alcohol-phenols, alcohol peroxides, ether peroxides, acetal and hemiacetal peroxides, ketone peroxides (whether or not chemically defined), and their halogenated, sulphonated, nitrated or nitrosated derivatives |
|
3104 20 |
Potassium chloride |
|
3105 20 |
Mineral or chemical fertilisers containing the three fertilising elements nitrogen, phosphorus and potassium |
|
3105 60 |
Mineral or chemical fertilisers containing the two fertilising elements phosphorus and potassium |
|
ex 3105 90 20 |
Other fertilising containing photassium chloride |
|
ex 3105 90 80 |
Other fertilising containing photassium chloride |
|
3902 |
Polymers of propylene or of other olefins, in primary forms |
|
4011 |
New pneumatic tyres, of rubber |
|
44 |
Wood and articles of wood; wood charcoal |
|
4705 |
Wood pulp obtained by a combination of mechanical and chemical pulping processes |
|
4804 |
Uncoated kraft paper and paperboard, in rolls or sheets, other than that of heading 4802 or 4803 |
|
6810 |
Articles of cement, of concrete or of artificial stone, whether or not reinforced |
|
7005 |
Float glass and surface ground or polished glass, in sheets, whether or not having an absorbent, reflecting or non-reflecting layer, but not otherwise worked |
|
7007 |
Safety glass, consisting of toughened (tempered) or laminated glass |
|
7010 |
Carboys, bottles, flasks, jars, pots, phials, ampoules and other containers, of glass, of a kind used for the conveyance or packing of goods; preserving jars of glass; stoppers, lids and other closures, of glass |
|
7019 |
Glass fibres (including glass wool) and articles thereof (for example, yarn, rovings, woven fabrics) |
|
7106 |
Silver (including silver plated with gold or platinum), unwrought or in semi-manufactured forms, or in powder form |
|
7606 |
Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm |
|
7801 |
Unwrought lead |
|
ex 84 11 |
Turbojets, turbopropellers and other gas turbines with the exception of parts of turbojets or turbopropellers of CN code 8411 91 00 |
|
8431 |
Parts suitable for use solely or principally with the machinery of headings 8425 to 8430 |
|
8901 |
Cruise ships, excursion boats, ferry-boats, cargo ships, barges and similar vessels for the transport of persons or goods |
|
8904 |
Tugs and pusher craft |
|
8905 |
Light-vessels, fire-floats, dredgers, floating cranes, and other vessels the navigability of which is subsidiary to their main function; floating docks; floating or submersible drilling or production platforms |
|
9403 |
Other furniture and parts thereof |
Part B
|
CN code |
Name of the good |
|
2402 |
Cigars, cheroots, cigarillos and cigarettes, of tobacco or of tobacco substitutes |
|
2811 |
inorganic acids and inorganic oxygen compounds of non-metals (excl. hydrogen chloride "hydrochloric acid", chlorosulphuric acid, sulphuric acid, oleum, nitric acid, sulphonitric acids, diphosphorus pentaoxide, phosphoric acid, polyphosphoric acids, oxides of boron and boric acids) |
|
2818 |
artificial corundum, whether or not chemically defined; aluminium oxide; aluminium hydroxide |
|
2834 |
nitrites; nitrates |
|
2836 |
carbonates; peroxocarbonates "percarbonates"; commercial ammonium carbonate containing ammonium carbamate |
|
2903 |
halogenated derivatives of hydrocarbons |
|
2905 11 |
methanol "methyl alcohol" |
|
2914 |
ketones and quinones, whether or not with other oxygen function, and their halogenated, sulphonated, nitrated or nitrosated derivatives |
|
2915 |
saturated acyclic monocarboxylic acids and their anhydrides, halides, peroxides and peroxyacids; their halogenated, sulphonated, nitrated or nitrosated derivatives |
|
2917 |
polycarboxylic acids, their anhydrides, halides, peroxides and peroxyacids; their halogenated, sulphonated, nitrated or nitrosated derivatives |
|
2922 |
oxygen-function amino-compounds |
|
2923 |
quaternary ammonium salts and hydroxides; lecithins and other phosphoaminolipids, whether or not chemically defined |
|
2931 |
separate chemically defined organo-inorganic compounds (excl. organo-sulphur compounds and those of mercury) |
|
2933 |
heterocyclic compounds with nitrogen hetero-atom[s] only |
|
3301 |
essential oils, whether or not terpeneless, incl. concretes and absolutes; resinoids; extracted oleoresins; concentrates of essential oils in fats, fixed oils, waxes or the like, obtained by enfleurage or maceration; terpenic by-products of the deterpenation of essential oils; aqueous distillates and aqueous solutions of essential oils |
|
3304 |
beauty or make-up preparations and preparations for the care of the skin, incl. sunscreen or suntan preparations (excl. medicaments); manicure or pedicure preparations |
|
3305 |
preparations for use on the hair |
|
3306 |
preparations for oral or dental hygiene, incl. denture fixative pastes and powders; yarn used to clean between the teeth "dental floss", in individual retail packages |
|
3307 |
shaving preparations, incl. pre-shave and aftershave products, personal deodorants, bath and shower preparations, depilatories and other perfumery, toilet or cosmetic preparations, n.e.s.; prepared room deodorisers, whether or not perfumed or having disinfectant properties |
|
3401 |
soap; organic surface-active products and preparations for use as soap, in the form of bars, cakes, moulded pieces or shapes, whether or not containing soap; organic surface-active products and preparations for washing the skin, in the form of liquid or cream and put up for retail sale, whether or not containing soap; paper, wadding, felt and nonwovens, impregnated, coated or covered with soap or detergent |
|
3402 |
organic surface-active agents (excl. soap); surface-active preparations, washing preparations, incl. auxiliary washing preparations, and cleaning preparations, whether or not containing soap (excl. those of heading 3401 ) |
|
3404 |
artificial waxes and prepared waxes |
|
3801 |
artificial graphite; colloidal or semi-colloidal graphite; preparations based on graphite or other carbon in the form of pastes, blocks, plates or other semi-manufactures |
|
3811 |
anti-knock preparations, oxidation inhibitors, gum inhibitors, viscosity improvers, anti-corrosive preparations and other prepared additives, for mineral oils, incl. gasoline, or for other liquids used for the same purposes as mineral oils |
|
3812 |
prepared rubber accelerators; compound plasticisers for rubber or plastics, n.e.s.; anti-oxidising preparations and other compound stabilisers for rubber or plastics |
|
3817 |
mixed alkylbenzenes and mixed alkylnaphthalenes produced by the alkylation of benzene and naphthalene (excl. mixed isomers of cyclic hydrocarbons) |
|
3819 |
hydraulic brake fluids and other prepared liquids for hydraulic transmission not containing petroleum oil or bituminous mineral oil, or containing < 70% petroleum oil or bituminous mineral oil by weight |
|
3823 |
industrial monocarboxylic fatty acids; acid oils from refining; industrial fatty alcohols |
|
3824 |
prepared binders for foundry moulds or cores; chemical products and preparations for the chemical or allied industries, incl. mixtures of natural products, n.e.s. |
|
3901 |
polymers of ethylene, in primary forms |
|
3903 |
polymers of styrene, in primary forms |
|
3904 |
polymers of vinyl chloride or of other halogenated olefins, in primary forms |
|
3907 |
polyacetals, other polyethers and epoxide resins, in primary forms; polycarbonates, alkyd resins, polyallyl esters and other polyesters, in primary forms |
|
3908 |
polyamides, in primary forms |
|
3916 |
monofilament of which any cross-sectional dimension > 1 mm, rods, sticks and profile shapes, of plastics, whether or not surface-worked but not further worked |
|
3917 |
tubes, pipes and hoses, and fittings therefor, e.g. joints, elbows, flanges, of plastics |
|
3919 |
self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls (excl. floor, wall and ceiling coverings of heading 3918 ) |
|
3920 |
plates, sheets, film, foil and strip, of non-cellular plastics, not reinforced, laminated, supported or similarly combined with other materials, without backing, unworked or merely surface-worked or merely cut into squares or rectangles (excl. self-adhesive products, and floor, wall and ceiling coverings of heading 3918 ) |
|
3921 |
plates, sheets, film, foil and strip, of plastics, reinforced, laminated, supported or similarly combined with other materials, or of cellular plastic, unworked or merely surface-worked or merely cut into squares or rectangles (excl. self-adhesive products, floor, wall and ceiling coverings of heading 3918 ) |
|
3923 |
articles for the conveyance or packaging of goods, of plastics; stoppers, lids, caps and other closures, of plastics |
|
3925 |
builders’ ware of plastics, n.e.s. |
|
3926 |
articles of plastics and articles of other materials of heading 3901 to 3914 , n.e.s. |
|
4107 |
leather further prepared after tanning or crusting "incl. parchment-dressed leather", of bovine "incl. buffalo" or equine animals, without hair on, whether or not split (excl. chamois leather, patent leather and patent laminated leather, and metallised leather) |
|
4202 |
trunks, suitcases, vanity cases, executive-cases, briefcases, school satchels, spectacle cases, binocular cases, camera cases, musical instrument cases, gun cases, holsters and similar containers; travelling-bags, insulated food or beverage bags, toilet bags, rucksacks, handbags, shopping-bags, wallets, purses, map-cases, cigarette-cases, tobacco-pouches, tool bags, sports bags, bottle-cases, jewellery boxes, powder-boxes, cutlery cases and similar containers, of leather or of composition leather, of sheeting of plastics, of textile materials, of vulcanised fibre or of paperboard, or wholly or mainly covered with such materials or with paper |
|
4301 |
raw furskins, incl. heads, tails, paws and other pieces or cuttings suitable for use in furriery (excl. raw hides and skins of heading 4101 , 4102 or 4103 ) |
|
4703 |
chemical wood pulp, soda or sulphate (excl. dissolving grades) |
|
4801 |
newsprint as specified in note 4 to chapter 48, in rolls of a width > 28 cm or in square or rectangular sheets with one side > 28 cm and the other side > 15 cm in the unfolded state |
|
4802 |
uncoated paper and paperboard, of a kind used for writing, printing or other graphic purposes, and non-perforated punchcards and punch-tape paper, in rolls or in square or rectangular sheets, of any size, and handmade paper and paperboard (excl. newsprint of heading 4801 and paper of heading 4803 ) |
|
4803 |
toilet or facial tissue stock, towel or napkin stock and similar paper for household or sanitary purposes, cellulose wadding and webs of cellulose fibres, whether or not creped, crinkled, embossed, perforated, surface-coloured, surface-decorated or printed, in rolls of a width > 36 cm or in square or rectangular sheets with one side > 36 cm and the other side > 15 cm in the unfolded state |
|
4805 |
other paper and paperboard, uncoated, in rolls of a width > 36 cm or in square or rectangular sheets with one side > 36 cm and the other side > 15 cm in the unfolded state, not worked other than as specified in note 3 to this chapter, n.e.s. |
|
4810 |
paper and paperboard, coated on one or both sides with kaolin "china clay" or other inorganic substances, with or without a binder, and with no other coating, whether or not surface-coloured, surface-decorated or printed, in rolls or in square or rectangular sheets, of any size (excl. all other coated papers and paperboards) |
|
4811 |
paper, paperboard, cellulose wadding and webs of cellulose fibres, coated, impregnated, covered, surface-coloured, surface-decorated or printed, in rolls or in square or rectangular sheets, of any size (excl. goods of heading 4803 , 4809 and 4810 ) |
|
4818 |
toilet paper and similar paper, cellulose wadding or webs of cellulose fibres, of a kind used for household or sanitary purposes, in rolls of a width <= 36 cm, or cut to size or shape; handkerchiefs, cleansing tissues, towels, tablecloths, serviettes, bedsheets and similar household, sanitary or hospital articles, articles of apparel and clothing accessories, of paper pulp, paper, cellulose wadding or webs of cellulose fibres |
|
4819 |
cartons, boxes, cases, bags and other packing containers, of paper, paperboard, cellulose wadding or webs of cellulose fibres, n.e.s.; box files, letter trays, and similar articles, of paperboard of a kind used in offices, shops or the like |
|
4823 |
paper, paperboard, cellulose wadding and webs of cellulose fibres, in strips or rolls of a width <= 36 cm, in rectangular or square sheets of which no side > 36 cm in the unfolded state, or cut to shape other than rectangular or square, and articles of paper pulp, paper, paperboard, cellulose wadding or webs or cellulose fibres, n.e.s. |
|
5402 |
synthetic filament yarn, incl. synthetic monofilaments of < 67 decitex (excl. sewing thread and yarn put up for retail sale) |
|
5601 |
wadding of textile materials and articles thereof; textile fibres with a length of <= 5 mm "flock", textile dust and mill neps (excl. wadding and articles thereof impregnated or coated with pharmaceutical substances or put up for retail sale for medical, surgical, dental or veterinary purposes, and products impregnated, coated or covered with perfumes, cosmetics, soaps etc.) |
|
5603 |
nonwovens, whether or not impregnated, coated, covered or laminated, n.e.s. |
|
6204 |
women’s or girls’ suits, ensembles, jackets, blazers, dresses, skirts, divided skirts, trousers, bib and brace overalls, breeches and shorts (excl. knitted or crocheted, wind-jackets and similar articles, slips, petticoats and panties, tracksuits, ski suits and swimwear) |
|
6305 |
sacks and bags, of a kind used for the packing of goods, of all types of textile materials |
|
6403 |
footwear with outer soles of rubber, plastics, leather or composition leather and uppers of leather (excl. orthopaedic footwear, skating boots with ice or roller skates attached, and toy footwear) |
|
6806 |
slag-wool, rock-wool and similar mineral wools; exfoliated vermiculite, expanded clays, foamed slag and similar expanded mineral materials; mixtures and articles of heat-insulating, sound-insulating or sound absorbing mineral materials (excl. articles of light concrete, asbestos, asbestos-cement, cellulose fibre-cement or the like, mixtures and other articles of or based on asbestos, and ceramic products) |
|
6807 |
articles of asphalt or of similar materials, e.g. petroleum bitumen or coal tar pitch |
|
6808 |
panels, boards, tiles, blocks and similar articles of vegetable fibre, of straw or of shavings, chips, particles, sawdust or other waste of wood, agglomerated with cement, plaster or other mineral binders (excl. articles of asbestos-cement, cellulose fibre-cement or the like) |
|
6814 |
worked mica and articles of mica, incl. agglomerated or reconstituted mica, whether or not on a support of paper, paperboard or other materials (excl. electrical insulators, insulating fittings, resistors and capacitors, protective goggles of mica and their glasses, and mica in the form of christmas tree decorations) |
|
6815 |
articles of stone or of other mineral substances, incl. carbon fibres, articles of carbon fibres and articles of peat, n.e.s. |
|
6902 |
refractory bricks, blocks, tiles and similar refractory ceramic constructional goods (excl. those of siliceous fossil meals or similar siliceous earths) |
|
6907 |
ceramic flags and paving, hearth or wall tiles; ceramic mosaic cubes and the like, whether or not on a backing (excl. of siliceous fossil meals or similar siliceous earths, refractory goods, tiles specially adapted as table mats, ornamental articles and tiles specifically manufactured for stoves) |
|
7104 |
precious and semi-precious stones, synthetic or reconstructed, whether or not worked or graded but not strung, mounted or set; ungraded synthetic or reconstructed precious or semi-precious stones, temporarily strung for convenience of transport |
|
7112 |
waste and scrap of precious metal or of metal clad with precious metal; other waste and scrap containing precious metal or precious-metal compounds, of a kind used principally for the recovery of precious metal (excl. waste and scrap melted down into unworked blocks, ingots, or similar forms) |
|
7115 |
articles of precious metal or of metal clad with precious metal, n.e.s. |
|
8207 |
tools, interchangeable, for hand tools, whether or not power-operated, or for machine tools "e.g. for pressing, stamping, punching, tapping, threading, drilling, boring, broaching, milling, turning or screw driving", incl. dies for drawing or extruding metal, and rock-drilling or earth-boring tools |
|
8212 |
non-electric razors and razor blades of base metal, incl. razor blade blanks in strips |
|
8302 |
base metal mountings, fittings and similar articles suitable for furniture, doors, staircases, windows, blinds, coachwork, saddlery, trunks, chests, caskets or the like; base metal hat-racks, hat-pegs, brackets and similar fixtures; castors with mountings of base metal; automatic door closers of base metal |
|
8309 |
stoppers, caps and lids, incl. crown corks, screw caps and pouring stoppers, capsules for bottles, threaded bungs, bung covers, seals and other packing accessories, of base metal |
|
8407 |
spark-ignition reciprocating or rotary internal combustion piston engine |
|
8408 |
compression-ignition internal combustion piston engine "diesel or semi-diesel engine" |
|
8409 |
parts suitable for use solely or principally with internal combustion piston engine of heading 8407 or 8408 |
|
8412 |
engines and motors (excl. steam turbines, internal combustion piston engine, hydraulic turbines, water wheels, gas turbines and electric motors); parts thereof |
|
8413 |
pumps for liquids, whether or not fitted with a measuring device (excl. ceramic pumps and secretion aspirating pumps for medical use and medical pumps carried on or implanted in the body); liquid elevators (excl. pumps); parts thereof |
|
8414 |
air or vacuum pumps (excl. gas compound elevators and pneumatic elevators and conveyors); air or other gas compressors and fans; ventilating or recycling hoods incorporating a fan, whether or not fitted with filters; parts thereof |
|
8418 |
refrigerators, freezers and other refrigerating or freezing equipment, electric or other; heat pumps; parts thereof (excl. air conditioning machines of heading 8415 ) |
|
8419 |
machinery, plant or laboratory equipment whether or not electrically heated (excl. furnaces, ovens and other equipment of heading 8514 ), for the treatment of materials by a process involving a change of temperature such as heating, cooking, roasting, distilling, rectifying, sterilising, pasteurising, steaming, drying, evaporating, vaporising, condensing or cooling (excl. those used for domestic purposes); instantaneous or storage water heaters, non-electric; parts thereof |
|
8421 |
centrifuges, incl. centrifugal dryers (excl. those for isotope separation); filtering or purifying machinery and apparatus, for liquids or gases; parts thereof (excl. artificial kidneys) |
|
8422 |
dishwashing machines; machinery for cleaning or drying bottles or other containers; machinery for filling, closing, sealing or labelling bottles, cans, boxes, bags or other containers; machinery for capsuling bottles, jars, tubes and similar containers; other packing or wrapping machinery, incl. heat-shrink wrapping machinery; machinery for aerating beverages; parts thereof |
|
8424 |
mechanical appliances, whether or not hand-operated, for projecting, dispersing or spraying liquids or powders, n.e.s.; fire extinguishers, charged or not (excl. fire-extinguishing bombs and grenades); spray guns and similar appliances (excl. electric machines and apparatus for hot spraying of metals or sintered metal carbides of heading 8515 ); steam or sand blasting machines and similar jet projecting machines; parts thereof, n.e.s. |
|
8426 |
ships’ derricks; cranes, incl. cable cranes (excl. wheel-mounted cranes and vehicle cranes for railways); mobile lifting frames, straddle carriers and works trucks fitted with a crane |
|
8450 |
household or laundry-type washing machines, incl. machines which both wash and dry; parts thereof |
|
8455 |
metal-rolling mills and rolls therefor; parts of metal-rolling mills |
|
8466 |
parts and accessories suitable for use solely or principally with the machines of headings 8456 to 8465 , incl. work or tool holders, self-opening dieheads, dividing heads and other special attachments for the machines, n.e.s.; tool holders for any type of tool for working in the hand |
|
8467 |
tools for working in the hand, pneumatic, hydraulic or with self-contained electric or non-electric motor; parts thereof |
|
8471 |
automatic data-processing machines and units thereof; magnetic or optical readers, machines for transcribing data onto data media in coded form and machines for processing such data, n.e.s. |
|
8474 |
machinery for sorting, screening, separating, washing, crushing, grinding, mixing or kneading earth, stone, ores or other mineral substances, in solid, incl. powder or paste, form; machinery for agglomerating, shaping or moulding solid mineral fuels, ceramic paste, unhardened cements, plastering materials or other mineral products in powder or paste form; machines for forming foundry moulds of sand; parts thereof |
|
8477 |
machinery for working rubber or plastics or for the manufacture of products from these materials, not specified or included elsewhere in this chapter, parts thereof |
|
8479 |
machines and mechanical appliances having individual functions, not specified or included elsewhere in this chapter; parts thereof |
|
8480 |
moulding boxes for metal foundry; mould bases; moulding patterns; moulds for metal (other than ingot moulds), metal carbides, glass, mineral materials, rubber or plastics (excl. moulds of graphite or other carbons, ceramic or glass moulds and linotype moulds or matrices) |
|
8481 |
taps, cocks, valves and similar appliances for pipes, boiler shells, tanks, vats or the like, incl. pressure-reducing valves and thermostatically controlled valves; parts thereof |
|
8482 |
ball or roller bearings (excl. steel balls of heading 7326 ); parts thereof |
|
8483 |
transmission shafts, incl. camshafts and crankshafts, and cranks; bearing housings and plain shaft bearings for machines; gears and gearing; ball or roller screws, gear boxes and other speed changers, incl. torque converters; flywheels and pulleys, incl. pulley blocks, clutches and shaft couplings, incl. universal joints; parts thereof |
|
8487 |
machinery parts, n.e.s. in chapter 84 (excl. parts containing electrical connectors, insulators, coils, contacts or other electrical features) |
|
8501 |
electric motors and generators (excl. generating sets) |
|
8502 |
electric generating sets and rotary converters |
|
8503 |
parts suitable for use solely or principally with electric motors and generators, electric generating sets and rotary converters, n.e.s. |
|
8504 |
electrical transformers, static converters, e.g. rectifiers, and inductors; parts thereof |
|
8511 |
electrical ignition or starting equipment of a kind used for spark-ignition or compression-ignition internal combustion engines, e.g. ignition magnetos, magneto-dynamos, ignition coils, sparking plugs, glow plugs and starter motors; generators, e.g. dynamos and alternators, and cut-outs of a kind used in conjunction with such engines; parts thereof |
|
8516 |
electric instantaneous or storage water heaters and immersion heaters; electric space-heating apparatus and soil-heating apparatus; electro-thermic hairdressing apparatus, e.g. hairdryers, hair curlers and curling tong heaters, and hand dryers; electric smoothing irons; other electro-thermic appliances of a kind used for domestic purposes; electric heating resistors (other than those of heading 8545 ); parts thereof |
|
8517 |
telephone sets, incl. telephones for cellular networks or for other wireless networks; other apparatus for the transmission or reception of voice, images or other data, incl. apparatus for communication in a wired or wireless network [such as a local or wide area network]; parts thereof (excl. than transmission or reception apparatus of heading 8443 , 8525 , 8527 or 8528 ) |
|
8523 |
discs, tapes, solid-state non-volatile storage devices, "smart cards" and other media for the recording of sound or of other phenomena, whether or not recorded, incl. matrices and masters for the production of discs (excl. products of chapter 37) |
|
8525 |
transmission apparatus for radio-broadcasting or television, whether or not incorporating reception apparatus or sound recording or reproducing apparatus; television cameras, digital cameras and video camera recorders |
|
8526 |
radar apparatus, radio navigational aid apparatus and radio remote control apparatus |
|
8531 |
electric sound or visual signalling apparatus, e.g. bells, sirens, indicator panels, burglar or fire alarms (excl. those for cycles, motor vehicles and traffic signalling); parts thereof |
|
8535 |
electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits, e.g., switches, fuses, lightning arresters, voltage limiters, surge suppressors, plugs and other connectors, junction boxes, for a voltage > 1 000 v (excl. control desks, cabinets, panels etc. of heading 8537 ) |
|
8536 |
electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits, e.g., switches, relays, fuses, surge suppressors, plugs, sockets, lamp holders and junction boxes, for a voltage <= 1 000 v (excl. control desks, cabinets, panels etc. of heading 8537 ) |
|
8537 |
boards, panels, consoles, desks, cabinets and other bases, equipped with two or more apparatus of heading 8535 or 8536 , for electric control or the distribution of electricity, incl. those incorporating instruments or apparatus of chapter 90, and numerical control apparatus (excl. switching apparatus for line telephony or line telegraphy) |
|
8538 |
parts suitable for use solely or principally with the apparatus of heading 8535 , 8536 or 8537 , n.e.s. |
|
8539 |
electric filament or discharge lamps, incl. sealed beam lamp units and ultraviolet or infra-red lamps; arc lamps; light-emitting diode "led" lamps; parts thereof |
|
8541 |
diodes, transistors and similar semiconductor devices; photosensitive semiconductor devices, incl. photovoltaic cells whether or not assembled in modules or made up into panels (excl. photovotaic generators); light emitting diodes "led"; mounted piezoelectric crystals; parts thereof |
|
8542 |
electronic integrated circuits; parts thereof |
|
8543 |
electrical machines and apparatus, having individual functions, n.e.s. in chapter 85 and parts thereof |
|
8544 |
insulated "incl. enamelled or anodised" wire, cable "incl. coaxial cable" and other insulated electric conductors, whether or not fitted with connectors; optical fibre cables, made up of individually sheathed fibres, whether or not assembled with electric conductors or fitted with connectors |
|
8545 |
carbon electrodes, carbon brushes, lamp carbons, battery carbons and other articles of graphite or other carbon, with or without metal, of a kind used for electrical purposes |
|
8603 |
self-propelled railway or tramway coaches, vans and trucks (excl. those of heading 8604 ) |
|
8606 |
railway or tramway goods vans and wagons (excl. self-propelled and luggage vans and post office coaches) |
|
8701 |
tractors (other than tractors of heading 8709 ) |
|
8703 |
motor cars and other motor vehicles principally designed for the transport of <10 persons, incl. station wagons and racing cars (excl. motor vehicles of heading 8702 ) |
|
8704 |
motor vehicles for the transport of goods, incl. chassis with engine and cab |
|
8716 |
trailers and semi-trailers; other vehicles, not mechanically propelled (excl. railway and tramway vehicles); parts thereof, n.e.s. |
|
8802 |
powered aircraft "e.g. helicopters and aeroplanes"; spacecraft, incl. satellites, and suborbital and spacecraft launch vehicles |
|
8903 |
yachts and other vessels for pleasure or sports; rowing boats and canoes |
|
9001 |
optical fibres and optical fibre bundles; optical fibre cables (excl. made up of individually sheathed fibres of heading 8544 ); sheets and plates of polarising material; lenses, incl. contact lenses, prisms, mirrors and other optical elements of any material, unmounted (excl. such elements of glass not optically worked) |
|
9006 |
photographic cameras, photographic flashlight apparatus and flashbulbs (excl. discharge lamps of heading 8539 ) |
|
9013 |
liquid crystal devices not constituting articles provided for more specifically in other heading; lasers (excl. laser diodes); other optical appliances and instruments not elsewhere specified in chapter 90 |
|
9014 |
direction finding compasses; other navigational instruments and appliances (excl. radio navigational equipment) |
|
9026 |
instruments and apparatus for measuring or checking the flow, level, pressure or other variables of liquids or gases, e.g. flow meters, level gauges, manometers, heat meters (excl. instruments and apparatus of heading 9014 , 9015 , 9028 or 9032 ) |
|
9027 |
instruments and apparatus for physical or chemical analysis, e.g. polarimeters, refractometers, spectrometers, gas or smoke analysis apparatus; instruments and apparatus for measuring or checking viscosity, porosity, expansion, surface tension or the like; instruments and apparatus for measuring or checking quantities of heat, sound or light, incl. exposure meters; microtomes |
|
9030 |
oscilloscopes, spectrum analysers and other instruments and apparatus for measuring or checking electrical quantities (excl. meters of heading 9028 ); instruments and apparatus for measuring or detecting alpha, beta, gamma, x-ray, cosmic or other ionising radiations |
|
9031 |
measuring or checking instruments, appliances and machines not elsewhere specified in chapter 90; profile projectors |
|
9032 |
regulating or controlling instruments and apparatus (excl. taps, cocks and valves of heading 8481 ) |
|
9401 |
seats, whether or not convertible into beds, and parts thereof, n.e.s. (excl. medical, surgical, dental or veterinary of heading 9402 ) |
|
9404 |
mattress supports (excl. spring interiors for seats); articles of bedding and similar furnishing, e.g. mattresses, quilts, eiderdowns, cushions, pouffes and pillows, fitted with springs or stuffed or internally filled with any material or of cellular rubber or plastics, whether or not covered (excl. pneumatic or water mattresses and pillows, blankets and covers) |
|
9405 |
lamps and lighting fittings, incl. searchlights and spotlights, and parts thereof, n.e.s; illuminated signs, illuminated nameplates and the like having a permanently fixed light source, and parts thereof, n.e.s. |
|
9406 |
prefabricated buildings, whether or not complete or already assembled |
ANNEX XXII
List of coal and other products as referred to in Article 3j
|
CN Code |
Name of the good |
|
2701 |
Coal; briquettes, ovoids and similar solid fuels manufactured from coal |
|
2702 |
Lignite, whether or not agglomerated, excluding jet |
|
2703 00 00 |
Peat (including peat litter), whether or not agglomerated |
|
2704 00 |
Coke and semi-coke of coal, of lignite or of peat, whether or not agglomerated; retort carbon |
|
2705 00 00 |
Coal gas, water gas, producer gas and similar gases, other than petroleum gases and other gaseous hydrocarbons |
|
2706 00 00 |
Tar distilled from coal, from lignite or from peat, and other mineral tars, whether or not dehydrated or partially distilled, including reconstituted tars |
|
2707 |
Oils and other products of the distillation of high temperature coal tar; similar products in which the weight of the aromatic constituents exceeds that of the non-aromatic constituents |
|
2708 |
Pitch and pitch coke, obtained from coal tar or from other mineral tars |
ANNEX XXIII
List of goods and technology referred to in Article 3k
|
CN code |
Name of the good |
|
0601 10 |
Bulbs, tubers, tuberous roots, corms, crowns and rhizomes, dormant |
|
0601 20 |
Bulbs, tubers, tuberous roots, corms, crowns and rhizomes, in growth or in flower; chicory plants and roots |
|
0602 30 |
Rhododendrons and azaleas, grafted or not |
|
0602 40 |
Roses, grafted or not |
|
0602 90 |
Other live plants (including their roots), cuttings and slips; mushroom spawn - Other |
|
0604 20 |
Foliage, branches and other parts of plants, without flowers or flower buds, and grasses, mosses and lichens, being goods of a kind suitable for bouquets or for ornamental purposes, fresh, dried, dyed, bleached, impregnated or otherwise prepared - Fresh |
|
2508 40 |
Other clays |
|
2508 70 |
Chamotte or dinas earths |
|
2509 00 |
Chalk |
|
2512 00 |
Siliceous fossil meals (for example, kieselguhr, tripolite and diatomite) and similar siliceous earths, whether or not calcined, of an apparent specific gravity of 1 or less |
|
2515 12 |
Merely cut, by sawing or otherwise, into blocks or slabs of a rectangular (including square) shape |
|
2515 20 |
Ecaussine and other calcareous monumental or building stone; alabaster |
|
2518 20 |
Calcined or sintered dolomite |
|
2519 10 |
Natural magnesium carbonate (magnesite) |
|
2520 10 |
Gypsum; anhydrite |
|
2521 00 |
Limestone flux; limestone and other calcareous stone, of a kind used for the manufacture of lime or cement |
|
2522 10 |
Quicklime |
|
2522 30 |
Hydraulic lime |
|
2525 20 |
Mica powder |
|
2526 20 |
Natural steatite, whether or not roughly trimmed or merely cut, by sawing or otherwise, into blocks or slabs of a rectangular (including square) shape; talc - Crushed or powdered |
|
2530 20 |
Kieserite, epsomite (natural magnesium sulphates) |
|
2701 00 |
Coal; briquettes, ovoids and similar solid fuels manufactured from coal |
|
2702 00 |
Lignite, whether or not agglomerated, excluding jet |
|
2703 00 |
Peat (including peat litter), whether or not agglomerated |
|
2704 00 |
Coke and semi-coke of coal, of lignite or of peat, whether or not agglomerated; retort carbon |
|
2707 30 |
Xylol (xylenes) |
|
2708 20 |
Pitch coke |
|
2712 10 |
Petroleum jelly |
|
2712 90 |
Petroleum jelly; paraffin wax, microcrystalline petroleum wax, slack wax, ozokerite, lignite wax, peat wax, other mineral waxes, and similar products obtained by synthesis or by other processes, whether or not coloured |
|
2715 00 |
Bituminous mastics, cut-backs and other bituminous mixtures based on natural asphalt, on natural bitumen, on petroleum bitumen, on mineral tar or on mineral tar pitch - Other |
|
2804 10 |
Hydrogen |
|
2804 30 |
Nitrogen |
|
2804 40 |
Oxygen |
|
2804 61 |
Silicon - Containing by weight not less than 99,99 % of silicon |
|
2804 80 |
Arsenic |
|
2806 10 |
Hydrogen chloride (hydrochloric acid) |
|
2806 20 |
Chlorosulphuric acid |
|
2811 29 |
Other inorganic oxygen compounds of non-metals - Other |
|
2813 10 |
Carbon disulphide |
|
2814 20 |
Ammonia in aqueous solution |
|
2815 12 |
Sodium hydroxide (caustic soda) - In aqueous solution (soda lye or liquid soda) |
|
2818 30 |
aluminium hydroxide |
|
2819 90 |
Chromium oxides and hydroxides - Other |
|
2820 10 |
Manganese dioxide |
|
2827 31 |
Other chlorides - Of magnesium |
|
2827 35 |
Other chlorides - Of nikel |
|
2828 90 |
Hypochlorites; commercial calcium hypochlorite; chlorites; hypobromites - Other |
|
2829 11 |
Chlorates - Of sodium |
|
2832 20 |
Sulphites (excluding sodium) |
|
2833 24 |
Sulphates of nickel |
|
2833 30 |
Alums |
|
2834 10 |
Nitrites |
|
2836 30 |
Sodium hydrogencarbonate (sodium bicarbonate) |
|
2836 50 |
Calcium carbonate |
|
2839 90 |
Silicates; commercial alkali metal silicates - Other |
|
2840 30 |
Peroxoborates (perborates) |
|
2841 50 |
Other chromates and dichromates; peroxochromates |
|
2841 80 |
Tungstates (wolframates) |
|
2843 10 |
Colloidal precious metals |
|
2843 21 |
Silver nitrate |
|
2843 29 |
Silver compounds - Other |
|
2843 30 |
Gold compounds |
|
2847 00 |
Hydrogen peroxide, whether or not solidified with urea |
|
2901 23 |
Butene (butylene) and isomers thereof |
|
2901 24 |
Buta-1,3-diene and isoprene |
|
2901 29 |
Acyclic hydrocarbons - Unsaturated - Other |
|
2902 11 |
Cyclohexane |
|
2902 30 |
Toluene |
|
2902 41 |
o-xylene |
|
2902 43 |
p-xylene |
|
2902 44 |
Mixed xylene isomers |
|
2902 50 |
Styrene |
|
2903 11 |
Chloromethane (methyl chloride) and chloroethane (ethyl chloride) |
|
2903 12 |
Dichloromethane (methylene chloride) |
|
2903 21 |
Vinyl chloride (chloroethylene) |
|
2903 23 |
Tetrachloroethylene (perchloroethylene) |
|
2903 29 |
Unsaturated chlorinated derivatives of acyclic hydrocarbons - Other |
|
2903 76 |
Bromochlorodifluoromethane (Halon-1211), bromotrifluoromethane (Halon-1301) and dibromotetrafluoroethanes (Halon-2402) |
|
2903 81 |
1,2,3,4,5,6-Hexachlorocyclohexane (HCH (ISO)), including lindane (ISO, INN) |
|
2903 91 |
Chlorobenzene, o-dichlorobenzene and p-dichlorobenzene |
|
2904 10 |
Derivatives containing only sulpho groups, their salts and ethyl esters |
|
2904 20 |
Derivatives containing only nitro or only nitroso groups |
|
2904 31 |
Perfluorooctane sulphonic acid |
|
2905 13 |
Butan-1-ol (n-butyl alcohol) |
|
2905 16 |
Octanol (octyl alcohol) and isomers thereof |
|
2905 19 |
Saturated monohydric alcohols - Other |
|
2905 41 |
2-Ethyl-2-(hydroxymethyl)propane-1,3-diol (trimethylolpropane) |
|
2905 59 |
Other polyhydric alcohols - Other |
|
2906 13 |
Sterols and inositols |
|
2906 19 |
Cyclanic, cyclenic or cycloterpenic -Other |
|
2907 11 |
Phenol (hydroxybenzene) and its salts |
|
2907 13 |
Octylphenol, nonylphenol and their isomers; salts thereof |
|
2907 19 |
Monophenols - Other |
|
2907 22 |
Hydroquinone (quinol) and its salts |
|
2909 11 |
Pentachlorophenol (ISO) |
|
2909 20 |
Cyclanic, cyclenic or cycloterpenic ethers and their halogenated, sulphonated, nitrated or nitrosated derivatives |
|
2909 41 |
2,2′-Oxydiethanol (diethylene glycol, digol) |
|
2909 43 |
Monobutyl ethers of ethylene glycol or of diethylene glycol |
|
2909 49 |
Ether-alcohols and their halogenated, sulphonated, nitrated or nitrosated derivatives - Other |
|
2910 10 |
Oxirane (ethylene oxide) |
|
2910 20 |
Methyloxirane (propylene oxide) |
|
2911 00 |
Acetals and hemiacetals, whether or not with other oxygen function, and their halogenated, sulphonated, nitrated or nitrosated derivat |
|
2912 12 |
Ethanal (acetaldehyde) |
|
2912 49 |
Aldehyde-alcohols, aldehyde-ethers, aldehyde-phenols and aldehydes with other oxygen function - Other |
|
2912 60 |
Paraformaldehyde |
|
2914 11 |
Acetone |
|
2914 61 |
Anthraquinone |
|
2915 13 |
Esters of formic acid |
|
2915 90 |
Saturated acyclic monocarboxylic acids and their anhydrides, halides, peroxides and peroxyacids; their halogenated, sulphonated, nitrated or nitrosated derivatives - Other |
|
2916 12 |
Esters of acrylic acid |
|
2916 13 |
Methacrylic acid and its salts |
|
2916 14 |
Esters of methacrylic acid |
|
2916 15 |
Oleic, linoleic or linolenic acids, their salts and esters |
|
2917 33 |
Dinonyl or didecyl orthophthalates |
|
2920 11 |
Parathion (ISO) and parathion-methyl (ISO) (methyl-parathion) |
|
2921 22 |
Hexamethylenediamine and its salts |
|
2921 41 |
Aniline and its salts |
|
2922 11 |
Monoethanolamine and its salts |
|
2922 43 |
Anthranilic acid and its salts |
|
2923 20 |
Lecithins and other phosphoaminolipids |
|
2930 40 |
Methionine |
|
2933 54 |
Other derivatives of malonylurea (barbituric acid); salts thereof |
|
2933 71 |
6-Hexanelactam (epsilon-caprolactam) |
|
3201 90 |
Tanning extracts of vegetable origin; tannins and their salts, ethers, esters and other derivatives |
|
3202 10 |
Synthetic organic tanning substances |
|
3202 90 |
Synthetic organic tanning substances; inorganic tanning substances; tanning preparations, whether or not containing natural tanning substances; enzymatic preparations for pre-tanning |
|
3203 00 |
Colouring matter of vegetable or animal origin, incl. dye extracts (excl. animal black), whether or not chemically defined; preparations based on colouring matter of vegetable or animal origin of a kind used to dye fabrics or produce colorant preparations (excl. preparations of heading 3207 , 3208 , 3209 , 3210 , 3213 and 3215 ) - Other |
|
3204 90 |
Synthetic organic colouring matter, whether or not chemically defined; preparations as specified in note 3 to this chapter based on synthetic organic colouring matter; synthetic organic products of a kind used as fluorescent brightening agents or as luminophores, whether or not chemically defined |
|
3205 00 |
colour lakes (other than chinese or japanese lacquer and paints); preparations based on colour lakes of a kind used to dye fabrics or produce colorant preparations (excl. preparations of heading 3207 , 3208 , 3209 , 3210 , 3213 and 3215 ) |
|
3206 41 |
ultramarine and preparations based thereon of a kind used for colouring any material or produce colorant preparations (excl. preparations of heading 3207 , 3208 , 3209 , 3210 , 3213 and 3215 ) |
|
3206 49 |
inorganic or mineral colouring matter, n.e.s.; preparations based on inorganic or mineral colouring matter of a kind used for colouring any material or produce colorant preparations, n.e.s. (excl. preparations of heading 3207 , 3208 , 3209 , 3210 , 3213 and 3215 and inorganic products of a kind used as liminophores) - Other |
|
3207 10 |
Prepared pigments, prepared opacifiers, prepared colours and similar preparations |
|
3207 20 |
Engobes (slips) |
|
3207 30 |
Liquid lustres and similar preparations |
|
3207 40 |
Glass frit and other glass, in the form of powder, granules or flakes |
|
3208 10 |
Paints and varnishes (including enamels and lacquers) based on synthetic polymers or chemically modified natural polymers, dispersed or dissolved in a non-aqueous medium; solutions as defined in note 4 to Chapter 32 - Based on polyesters |
|
3208 20 |
Paints and varnishes (including enamels and lacquers) based on synthetic polymers or chemically modified natural polymers, dispersed or dissolved in a non-aqueous medium; solutions as defined in note 4 to Chapter 32 - Based on acrylic or vinyl polymers |
|
3208 90 |
Paints and varnishes (including enamels and lacquers) based on synthetic polymers or chemically modified natural polymers, dispersed or dissolved in a non-aqueous medium; solutions as defined in note 4 to Chapter 32 - |
|
3209 10 |
paints and varnishes, incl. enamels and lacquers, based on acrylic or vinyl polymers, dispersed or dissolved in an aqueous medium |
|
3209 90 |
paints and varnishes, incl. enamels and lacquers, based on synthetic or chemically modified natural polymers, dispersed or dissolved in an aqueous medium (excl. those based on acrylic or vinyl polymers) - Other |
|
3210 00 |
Other paints and varnishes (including enamels, lacquers and distempers); prepared water pigments of a kind used for finishing leather |
|
3212 90 |
Pigments (including metallic powders and flakes) dispersed in non- aqueous media, in liquid or paste form, of a kind used in the manufacture of paints (including enamels); stamping foils; dyes and other colouring matter put up in forms or packings for retail sale - Other |
|
3214 10 |
Glaziers' putty, grafting putty, resin cements, caulking compounds and other mastics; painters' fillings |
|
3214 90 |
Glaziers' putty, grafting putty, resin cements, caulking compounds and other mastics; painters' fillings; non-refractory surfacing preparations for façades, indoor walls, floors, ceilings or the like - Other |
|
3215 11 |
Printing ink - Black |
|
3215 19 |
Printing ink - Other |
|
3403 11 |
Lubricating preparations (including cutting-oil preparations, bolt or nut release preparations, anti-rust or anti-corrosion preparations and mould-release preparations, based on lubricants) and preparations of a kind used for the oil or grease treatment of textile materials, leather, furskins or other materials, but excluding preparations containing, as basic constituents, 70 % or more by weight of petroleum oils or of oils obtained from bituminous minerals – Containing petroleum oils or oils obtained from bituminous minerals - Preparations for the treatment of textile materials, leather, furskins or other materials |
|
3403 19 |
Lubricating preparations (including cutting-oil preparations, bolt or nut release preparations, anti-rust or anti-corrosion preparations and mould-release preparations, based on lubricants) and preparations of a kind used for the oil or grease treatment of textile materials, leather, furskins or other materials, but excluding preparations containing, as basic constituents, 70 % or more by weight of petroleum oils or of oils obtained from bituminous minerals – Containing petroleum oils or oils obtained from bituminous minerals - Other |
|
3403 91 |
Preparations for the treatment of textile materials, leather, furskins or other materials |
|
3403 99 |
Lubricating preparations (including cutting-oil preparations, bolt or nut release preparations, anti-rust or anti-corrosion preparations and mould-release preparations, based on lubricants) and preparations of a kind used for the oil or grease treatment of textile materials, leather, furskins or other materials, but excluding preparations containing, as basic constituents, 70 % or more by weight of petroleum oils or of oils obtained from bituminous minerals - Other |
|
3505 10 |
Dextrins and other modified starches |
|
3506 99 |
Prepared glues and other prepared adhesives, not elsewhere specified or included; products suitable for use as glues or adhesives, put up for retail sale as glues or adhesives, not exceeding a net weight of 1 kg- Other |
|
3701 20 |
Instant print film |
|
3701 91 |
For colour photography (polychrome) |
|
3702 32 |
Other film, with silver halide emulsion |
|
3702 39 |
Photographic film in rolls, sensitised, unexposed, of any material other than paper, paperboard or textiles; instant print film in rolls, sensitised, unexposed - Other |
|
3702 43 |
Other film, without perforations, of a width exceeding 105 mm - Of a width exceeding 610 mm and of a length not exceeding 200 m |
|
3702 44 |
Other film, without perforations, of a width exceeding 105 mm - Of a width exceeding 105 mm but not exceeding 610 mm |
|
3702 55 |
Other film, for colour photography (polychrome) - Of a width exceeding 16 mm but not exceeding 35 mm and of a length exceeding 30 m |
|
3702 56 |
Other film, for colour photography (polychrome) - Of a width exceeding 35 mm |
|
3702 97 |
Other film, for colour photography (polychrome) - Of a width not exceeding 35 mm and of a length exceeding 30 mm. |
|
3702 98 |
photographic film, sensitised, in rolls, unexposed, with perforations, for monochrome photography, width > 35 mm (excl. of paper, paperboard and textiles; x-ray film) |
|
3703 20 |
photographic paper, paperboard and textiles, sensitised, unexposed, for colour photography "polychrome" (excl. products in rolls > 610 mm wide) |
|
3703 90 |
photographic paper, paperboard and textiles, sensitised, unexposed, for monochrome photography (excl. products in rolls > 610 mm wide) |
|
3705 00 |
photographic plates and film, exposed and developed (excl. products made of paper, paperboard or textiles, cinematographic film and ready-to-use printing plates) |
|
3706 10 |
cinematographic film, exposed and developed, whether or not incorporating soundtrack or consisting only of soundtrack, width >= 35 mm |
|
3801 20 |
colloidal or semi-colloidal graphite |
|
3806 20 |
salts of rosin, of resin acids or of derivatives of rosin or resin acids (excl. salts of rosin adducts) |
|
3807 00 |
wood tar; wood tar oils; wood creosote; wood naphtha; vegetable pitch; brewer's pitch and similar preparations based on rosin, resin acids or vegetable pitch (excl. burgundy pitch, yellow pitch, stearin pitch, fatty acid pitch, fatty tar and glycerin pitch) |
|
3809 10 |
finishing agents, dye carriers to accelerate the dyeing or fixing of dyestuffs and other products and preparations such as dressings and mordants of a kind used in the textile, paper, leather or like industries, n.e.s., based on starch or derivatives thereof |
|
3809 91 |
finishing agents, dye carriers to accelerate the dyeing or fixing of dyestuffs, and other products and preparations, e.g. dressings and mordants of a kind used in the textile or similar industries, n.e.s. (excl. those with a basis of amylaceous substances) |
|
3809 92 |
finishing agents, dye carriers to accelerate the dyeing or fixing of dyestuffs, and other products and preparations, e.g. dressings and mordants of a kind used in the paper or similar industries, n.e.s. (excl. those with a basis of amylaceous substances) |
|
3809 93 |
finishing agents, dye carriers to accelerate the dyeing or fixing of dyestuffs, and other products and preparations, e.g. dressings and mordants of a kind used in the leather or similar industries, n.e.s. (excl. those with a basis of amylaceous substances) |
|
3810 10 |
pickling preparations for metal surfaces; soldering, brazing or welding pastes and powders consisting of metal and other materials |
|
3811 21 |
prepared additives for oil lubricants containing petroleum oil or bituminous mineral oil |
|
3811 29 |
prepared additives for oil lubricants not containing petroleum oil or bituminous mineral oil |
|
3811 90 |
oxidation inhibitors, gum inhibitors, viscosity improvers, anti-corrosive preparations and other prepared additives for mineral oils, incl. gasoline, or for other liquids used for the same purposes as mineral oils (excl. anti-knock preparations and oil lubricant additives) |
|
3812 20 |
compound plasticisers for rubber or plastics, n.e.s. |
|
3813 00 |
preparations and charges for fire-extinguishers; charged fire-extinguishing grenades (excl. full or empty fire-extinguishing devices, whether or not portable, unmixed chemically undefined products with fire-extinguishing properties in other forms) |
|
3814 00 |
organic composite solvents and thinners, n.e.s.; prepared paint or varnish removers (excl. nail varnish remover) |
|
3815 11 |
supported catalysts with nickel or a nickel compound as the active substance, n.e.s. |
|
3815 12 |
supported catalysts with precious metal or a precious-metal compound as the active substance, n.e.s. |
|
3815 19 |
supported catalysts, n.e.s. (excl. with precious metal, a precious-metal compound, nickel or a nickel compound as the active substance) |
|
3815 90 |
reaction initiators, reaction accelerators and catalytic preparations, n.e.s. (excl. rubber accelerators and supported catalysts) |
|
3816 00 10 |
Dolomite ramming mix |
|
3817 00 |
mixed alkylbenzenes and mixed alkylnaphthalenes produced by the alkylation of benzene and naphthalene (excl. mixed isomers of cyclic hydrocarbons) |
|
3819 00 |
hydraulic brake fluids and other prepared liquids for hydraulic transmission not containing petroleum oil or bituminous mineral oil, or containing < 70% petroleum oil or bituminous mineral oil by weight |
|
3820 00 |
anti-freezing preparations and prepared de-icing fluids (excl. prepared additives for mineral oils or other liquids used for the same purposes as mineral oils) |
|
3823 13 |
tall oil fatty acids, industrial |
|
3827 90 |
Mixtures containing halogenated derivatives of methane, ethane or propane (excl. those of subheadings 3824.71.00 to 3824.78.00) |
|
3824 81 |
mixtures and preparations containing oxirane "ethylene oxide" |
|
3824 84 |
mixtures and preparations containing aldrin (iso), camphechlor (iso) "toxaphene", chlordane (iso), chlordecone (iso), ddt (iso) "clofenotane (inn), 1,1,1-trichloro-2,2-bis"p-chlorophenyl"ethane", dieldrin "iso, inn", endosulfan (iso), endrin (iso), heptachlor (iso) or mirex (iso) |
|
3824 99 |
chemical products and preparations of the chemical or allied industries, incl. those consisting of mixtures of natural products, n.e.s. |
|
3825 90 |
residual products of the chemical or allied industries, n.e.s. (excl. waste) |
|
3826 00 |
biodiesel and mixtures thereof, not containing or containing < 70 % by weight of petroleum oils or oils obtained from bituminous minerals |
|
3901 40 |
ethylene-alpha-olefin copolymers, having a specific gravity of < 0,94 , in primary forms |
|
3902 20 |
polyisobutylene, in primary forms |
|
3902 30 |
propylene copolymers, in primary forms |
|
3902 90 |
polymers of propylene or of other olefins, in primary forms (excl. polypropylene, polyisobutylene and propylene copolymers) |
|
3903 19 |
polystyrene, in primary forms (excl. expansible) |
|
3903 90 |
polymers of styrene, in primary forms (excl. polystyrene, styrene-acrylonitrile copolymers "san" and acrylonitrile-butadiene-styrene "abs") |
|
3904 10 |
poly"vinyl chloride", in primary forms, not mixed with any other substances |
|
3904 50 |
vinylidene chloride polymers, in primary forms |
|
3905 12 |
poly"vinyl acetate", in aqueous dispersion |
|
3905 19 |
poly"vinyl acetate", in primary forms (excl. in aqueous dispersion) |
|
3905 21 |
vinyl acetate copolymers, in aqueous dispersion |
|
3905 29 |
vinyl acetate copolymers, in primary forms (excl. in aqueous dispersion) |
|
3905 91 |
copolymers of vinyl, in primary forms (excl. vinyl chloride-vinyl acetate copolymers and other vinyl chloride copolymers, and vinyl acetate copolymers) |
|
3906 10 |
poly"methyl methacrylate", in primary forms |
|
3906 90 |
acrylic polymers, in primary forms (excl. poly"methyl methacrylate") |
|
3907 21 |
polyethers, in primary forms (excl. polyacetals and goods of 3002 10) |
|
3907 40 |
polycarbonates, in primary forms |
|
3907 70 |
poly"lactic acid", in primary forms |
|
3907 91 |
unsaturated polyallyl esters and other polyesters, in primary forms (excl. polycarbonates, alkyd resins, poly"ethylene terephthalate" and poly"lactic acid") |
|
3908 10 |
polyamides-6, -11, -12, -6,6, -6,9, -6,10 or -6,12, in primary forms |
|
3908 90 |
polyamides, in primary forms (excl. polyamides-6, -11, -12, -6,6, -6,9, -6,10 and -6,12) |
|
3909 20 |
melamine resins, in primary forms |
|
3909 39 |
amino-resins, in primary forms (excl. urea, thiourea and melamine resins and mdi) |
|
3909 40 |
phenolic resins, in primary forms |
|
3909 50 |
polyurethanes, in primary forms |
|
3912 11 |
non-plasticised cellulose acetates, in primary forms |
|
3912 90 |
cellulose and chemical derivatives thereof, n.e.s., in primary forms (excl. cellulose acetates, cellulose nitrates and cellulose ethers) |
|
3915 20 |
waste, parings and scrap, of polymers of styrene |
|
3917 10 |
artificial guts "sausage casings" of hardened protein or cellulose materials |
|
3917 23 |
rigid tubes, pipes and hoses, of polymers of vinyl chloride |
|
3917 31 |
flexible tubes, pipes and hoses, of plastics, burst pressure >= 27,6 mpa |
|
3917 32 |
flexible tubes, pipes and hoses of plastics, not reinforced or otherwise combined with other materials, without fittings |
|
3917 33 |
flexible tubes, pipes and hoses of plastics, not reinforced or otherwise combined with other materials, with fittings, seals or connectors |
|
3920 10 |
plates, sheets, film, foil and strip, of non-cellular polymers of ethylene, not reinforced, laminated, supported or similarly combined with other materials, without backing, unworked or merely surface-worked or merely cut into squares or rectangles (excl. self-adhesive products, and floor, wall and ceiling coverings of heading 3918 ) |
|
3920 61 |
plates, sheets, film, foil and strip, of non-cellular polycarbonates, not reinforced, laminated, supported or similarly combined with other materials, without backing, unworked or merely surface-worked or merely cut into squares or rectangles (excl. those of poly"methyl methacrylate", self-adhesive products, and floor, wall and ceiling coverings of heading 3918 ) |
|
3920 69 |
plates, sheets, film, foil and strip, of non-cellular polyesters, not reinforced, laminated, supported or similarly combined with other materials, not worked or only surface-worked, or only cut to rectangular, incl. square, shapes (excl. polycarbonates, polythylene terephthalate and other unsaturated polyesters, self-adhesive products, and floor, wall and ceiling coverings in heading 3918 ) |
|
3920 73 |
plates, sheets, film, foil and strip, of non-cellular cellulose acetates, not reinforced, laminated, supported or similarly combined with other materials, without backing, unworked or merely surface-worked or merely cut into squares or rectangles (excl. self-adhesive products, and floor, wall and ceiling coverings of heading 3918 ) |
|
3920 91 |
plates, sheets, film, foil and strip, of non-cellular poly"vinyl butyral", not reinforced, laminated, supported or similarly combined with other materials, without backing, unworked or merely surface-worked or merely cut into squares or rectangles (excl. self-adhesive products, floor, wall and ceiling coverings of heading 3918 ) |
|
3921 19 |
plates, sheets, film, foil and strip, of cellular plastic, unworked or merely surface-worked or merely cut into squares or rectangles (excl.those of polymers of styrene, vinyl chloride, polyurethanes and regenerated cellulose, self-adhesive products, floor, wall and ceiling coverings of heading 3918 and sterile surgical or dental adhesion barriers of subheading 3006.10.30) |
|
3922 90 |
bidets, lavatory pans, flushing cisterns and similar sanitary ware, of plastics (excl. baths, shower-baths, sinks, washbasins, lavatory seats and covers) |
|
3925 20 |
doors, windows and their frames and thresholds for doors, of plastics |
|
4002 11 |
styrene-butadiene rubber latex "sbr"; carboxylated styrene-butadiene rubber latex "xsbr" |
|
4002 20 |
butadiene rubber "br", in primary forms or in plates, sheets or strip |
|
4002 31 |
isobutylene isoprene rubber "iir", in primary forms or in plates, sheets or strip |
|
4002 39 |
halo-isobutene-isoprene rubber "ciir" or "biir", in primary forms or in plates, sheets or strip |
|
4002 41 |
chloroprene latex "chlorobutadiene rubber, cr" |
|
4002 51 |
latex of acrylonitrile-butadiene rubber "nbr" |
|
4002 80 |
mixtures of natural rubber, balata, gutta-percha, guayule, chicle or similar types of natural rubber with synthetic rubber or factice, in primary forms or in plates, sheets or strip |
|
4002 91 |
synthetic rubber and factice derived from oils, in primary forms or in plates, sheets or strip (excl. styrene-butadiene rubber "sbr", carboxylated styrene-butadiene rubber "xsbr", butadiene rubber "br", isobutylene isoprene rubber "iir", halo-isobutene-isoprene rubber "ciir" or "biir", chloroprene rubber "cr", acrylonitrile-butadiene rubber "nbr", isoprene rubber "ir" and non-conjugated ethylene-propylene diene rubber "epdm") |
|
4002 99 |
synthetic rubber and factice derived from oils, in primary forms or in plates, sheets or strip (excl. latex, styrene-butadiene rubber "sbr", carboxylated styrene-butadiene rubber "xsbr", butadiene rubber "br", isobutylene isoprene rubber "iir", halo-isobutene-isoprene rubber "ciir" or "biir", chloroprene rubber "cr", acrylonitrile-butadiene rubber "nbr", isoprene rubber "ir" and non-conjugated ethylene-propylene diene rubber "epdm") |
|
4005 10 |
rubber, unvulcanised, compounded with carbon black or silica, in primary forms or in plates, sheets or strip |
|
4005 20 |
compounded rubber, unvulcanised, in the form of solutions or dispersions (excl. rubber compounded with carbon black or silica, and mixtures of natural rubber, balata, gutta-percha, guayule, chicle and similar natural gums containing synthetic rubber or factice derived from oils) |
|
4005 91 |
compounded rubber, unvulcanised, in the form of plates, sheets or strip (excl. rubber compounded with carbon black or silica, and mixtures of natural rubber, balata, gutta-percha, guayule, chicle and similar natural gums containing synthetic rubber or factice derived from oils) |
|
4005 99 |
compounded, unvulcanised rubber in primary forms (excl. solutions and dispersions, those containing carbon black or silica, mixtures of natural rubber, balata, gutta-percha, guayule, chicle or similar types of natural rubber with synthetic rubber or factice, and those in the form of plates, sheets or strip) |
|
4006 10 |
'camel-back' strips of unvulcanised rubber, for retreading rubber tyres |
|
4008 21 |
plates, sheets and strip, of non-cellular rubber |
|
4009 12 |
tubes, pipes and hoses, of vulcanised rubber (excl. hard rubber), not reinforced or otherwise combined with other materials, with fittings |
|
4009 41 |
tubes, pipes and hoses, of vulcanised rubber (excl. hard rubber), reinforced or otherwise combined with materials other than metal or textile materials, without fittings |
|
4010 31 |
endless transmission belts of trapezoidal cross-section "v-belts", of vulcanised rubber, v-ribbed, of an outside circumference > 60 cm but <= 180 cm |
|
4010 33 |
endless transmission belts of trapezoidal cross-section "v-belts", of vulcanised rubber, v-ribbed, of an outside circumference > 180 cm but <= 240 cm |
|
4010 35 |
endless synchronous belts, of vulcanised rubber, of an outside circumference > 60 cm but <= 150 cm |
|
4010 36 |
endless synchronous belts, of vulcanised rubber, of an outside circumference > 150 cm but <= 198 cm |
|
4010 39 |
transmission belts or belting, of vulcanised rubber (excl. endless transmission belts of trapezoidal cross-section "v-belts", v-ribbed, of an outside circumference > 60 cm but <= 240 cm and endless synchronous belts of an outside circumference > 60 cm but <= 198 cm) |
|
4012 11 |
retreaded pneumatic tyres, of rubber, of a kind used on motor cars "incl. station wagons and racing cars" |
|
4012 13 |
retreaded pneumatic tyres, of rubber, of a kind used on aircraft |
|
4012 19 |
retreaded pneumatic tyres, of rubber (excl. of a kind used on motor cars, station wagons, racing cars, buses, lorries and aircraft) |
|
4012 20 |
used pneumatic tyres of rubber |
|
4016 93 |
gaskets, washers and other seals, of vulcanised rubber (excl. hard rubber and those of cellular rubber) |
|
4407 19 |
coniferous wood sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness of > 6 mm (excl. pine "pinus spp.", fir "abies spp." and spruce "picea spp.") |
|
4407 92 |
beech "fagus spp.", sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness of > 6 mm |
|
4407 94 |
cherry "prunus spp.", sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness of > 6 mm |
|
4407 97 |
poplar and aspen "populus spp.", sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness of > 6 mm |
|
4407 99 |
wood, sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness of > 6 mm (excl. tropical wood, coniferous wood, oak "quercus spp.", beech "fagus spp.", maple "acer spp.", cherry "prunus spp.", ash "fraxinus spp.", birch "betula spp.", poplar and aspen "populus spp.") |
|
4408 10 |
sheets for veneering, incl. those obtained by slicing laminated wood, for coniferous plywood or for other similar laminated coniferous wood and other coniferous wood, sawn lengthwise, sliced or peeled, whether or not planed, sanded, spliced or end-jointed, of a thickness of <= 6 mm |
|
4411 13 |
medium density fibreboard "mdf" of wood, of a thickness > 5 mm but <= 9 mm |
|
4411 94 |
fibreboard of wood or other ligneous materials, whether or not agglomerated with resins or other organic bonding agents, of a density of <= 0,5 g/cm3 (excl. medium density fibreboard "mdf"; particle board, whether or not bonded with one or more sheets of fibreboard; laminated wood with a layer of plywood; cellular wood panels of which both sides are fibreboard; paperboard; identifiable furniture components) |
|
4412 31 |
plywood consisting solely of sheets of wood <= 6 mm thick, with at least one outer ply of tropical wood (excl. sheets of compressed wood, cellular wood panels, inlaid wood and sheets identifiable as furniture components) |
|
4412 33 |
plywood consisting solely of sheets of wood <= 6 mm thick, with at least one outer ply of non-coniferous wood (excl. of bamboo, with an outer ply of tropical wood or of alder, ash, beech, birch, cherry, chestnut, elm, eucalyptus, hickory, horse chestnut, lime, maple, oak, plane tree, poplar, aspen, robinia, tulipwood or walnut, and sheets of compressed wood, cellular wood panels, inlaid wood and sheets identifiable as furniture components) |
|
4412 94 |
laminated wood as blockboard, laminboard or battenboard (excl. of bamboo, plywood consisting solely of sheets of wood <= 6 mm thick, sheets of compressed wood, inlaid wood and sheets identifiable as furniture components) |
|
4416 00 |
casks, barrels, vats, tubs and other coopers’ products parts thereof, of wood, incl. staves |
|
4418 40 |
wooden shuttering for concrete constructional work (excl. plywood boarding) |
|
4418 60 |
posts and beams, of wood |
|
4418 79 |
flooring panels, assembled, of wood other than bamboo (excl. multilayer panels and panels for mosaic floors) |
|
4503 10 |
corks and stoppers of all types, of natural cork, incl. round-edged blanks |
|
4504 10 |
tiles of any shape, blocks, plates, sheets and strip, solid cylinders, incl. discs, of agglomerated cork |
|
4701 00 |
mechanical wood pulp, not chemically treated |
|
4703 19 |
unbleached non-coniferous chemical wood pulp, soda or sulphate (excl. dissolving grades) |
|
4703 21 |
semi-bleached or bleached coniferous chemical wood pulp, soda or sulphate (excl. dissolving grades) |
|
4703 29 |
semi-bleached or bleached non-coniferous chemical wood pulp, soda or sulphate (excl. dissolving grades) |
|
4704 11 |
unbleached coniferous chemical wood pulp, sulphite (excl. dissolving grades) |
|
4704 21 |
semi-bleached or bleached coniferous chemical wood pulp, sulphite (excl. dissolving grades) |
|
4704 29 |
semi-bleached or bleached non-coniferous chemical wood pulp, sulphite (excl. dissolving grades) |
|
4705 00 |
wood pulp obtained by a combination of mechanical and chemical pulping processes |
|
4706 30 |
pulps of fibrous cellulosic bamboo material |
|
4706 92 |
chemical pulp of fibrous cellulosic material (excl. that of bamboo, wood, cotton linters and fibres derived from recovered [waste and scrap] paper or paperboard) |
|
4707 10 |
recovered "waste and scrap" paper or paperboard of unbleached kraft paper, corrugated paper or corrugated paperboard |
|
4707 30 |
recovered "waste and scrap" paper or paperboard made mainly of mechanical pulp, e.g. newspapers, journals and similar printed matter |
|
4802 20 |
paper and paperboard of a kind used as a base for photosensitive, heat-sensitive or electrosensitive paper and paperboard, uncoated, in rolls or in square or rectangular sheets, of any size |
|
4802 40 |
wallpaper base, uncoated |
|
4802 58 |
uncoated paper and paperboard, of a kind used for writing, printing or other graphic purposes, and non-perforated punchcards and punch-tape paper, in rolls or in square or rectangular sheets, of any size, not containing fibres obtained by a mechanical or chemi-mechanical process or of which <= 10% by weight of the total fibre content consists of such fibres, weighing > 150 g/m2, n.e.s. |
|
4802 61 |
uncoated paper and paperboard, of a kind used for writing, printing or other graphic purposes, and non-perforated punchcards and punch-tape paper, in rolls of any size, of which > 10% by weight of the total fibre content consists of fibres obtained by a mechanical or chemi-mechanical process, n.e.s. |
|
4804 11 |
unbleached kraftliner, uncoated, in rolls of a width > 36 cm |
|
4804 19 |
kraftliner, uncoated, in rolls of a width > 36 cm (excl. unbleached and goods of heading 4802 and 4803 ) |
|
4804 21 |
unbleached sack kraft paper, uncoated, in rolls of a width > 36 cm (excl. goods of heading 4802 , 4803 or 4808 ) |
|
4804 29 |
sack kraft paper, uncoated, in rolls of a width > 36 cm (excl. unbleached, and goods of heading 4802 , 4803 or 4808 ) |
|
4804 31 |
unbleached kraft paper and paperboard, uncoated, in rolls of a width > 36 cm or in square or rectangular sheets with one side > 36 cm and the other side > 15 cm in the unfolded state, weighing <= 150 g/m2 (excl. kraftliner, sack kraft paper and goods of heading 4802 , 4803 or 4808 ) |
|
4804 39 |
kraft paper and paperboard, uncoated, in rolls of a width > 36 cm or in square or rectangular sheets with one side > 36 cm and the other side > 15 cm in the unfolded state, weighing <= 150 g/m2 (excl. unbleached, kraftliner, sack kraft paper and goods of heading 4802 , 4803 or 4808 ) |
|
4804 41 |
unbleached kraft paper and paperboard, uncoated, in rolls of a width > 36 cm or in square or rectangular sheets with one side > 36 cm and the other side > 15 cm in the unfolded state, weighing > 150 g to < 225 g/m2 (excl. kraftliner, sack kraft paper, and goods of heading 4802 , 4803 or 4808 ) |
|
4804 42 |
kraft paper and paperboard, uncoated, in rolls of a width > 36 cm or in square or rectangular sheets with one side > 36 cm and the other side > 15 cm in the unfolded state, weighing > 150 g to < 225 g/m2, bleached uniformly in the mass, containing > 95% chemically processed wood fibre by weight in relation to the total fibre content (excl. kraftliner, sack kraft paper and goods of heading 4802 , 4803 or 4808 ) |
|
4804 49 |
kraft paper and paperboard, uncoated, in rolls of a width > 36 cm or in square or rectangular sheets with one side > 36 cm and the other side > 15 cm in the unfolded state, weighing > 150 g to < 225 g/m2 (excl. unbleached, bleached uniformly in the mass and containing > 95% chemically processed wood fibre by weight in relation to the total fibre content, kraftliner, sack kraft paper and goods of heading 4802 , 4803 or 4808 ) |
|
4804 52 |
kraft paper and paperboard, uncoated, in rolls of a width > 36 cm or in square or rectangular sheets with one side > 36 cm and the other side > 15 cm in the unfolded state, weighing >= 225 g/m2, bleached uniformly in the mass, containing > 95% chemically processed wood fibre by weight in relation to the total fibre content (excl. kraftliner, sack kraft paper and goods of heading 4802 , 4803 or 4808 ) |
|
4804 59 |
kraft paper and paperboard, uncoated, in rolls of a width > 36 cm or in square or rectangular sheets with one side > 36 cm and the other side > 15 cm in the unfolded state, weighing >= 225 g/m2 (excl. unbleached or bleached uniformly in the mass and containing > 95% chemically prepared wood fibre by weight in relation to the total fibre content, and kraftliner, sack kraft paper and goods of heading 4802 , 4803 or 4808 ) |
|
4805 24 |
testliner "recycled liner board", uncoated, in rolls of a width > 36 cm or in square or rectangular sheets with one side > 36 cm and the other side > 15 cm in the unfolded state, weighing <= 150 g/m2 |
|
4805 25 |
testliner "recycled liner board", uncoated, in rolls of a width > 36 cm or in square or rectangular sheets with one side > 36 cm and the other side > 15 cm in the unfolded state, weighing > 150 g/m2 |
|
4805 40 |
filter paper and paperboard, in rolls of a width > 36 cm or in square or rectangular sheets with one side > 36 cm and the other side > 15 cm in the unfolded state |
|
4805 91 |
paper and paperboard, uncoated, in rolls of a width > 36 cm or in square or rectangular sheets with one side > 36 cm and the other side > 15 cm in the unfolded state, weighing <= 150 g/m2, n.e.s. |
|
4805 92 |
paper and paperboard, uncoated, in rolls of a width > 36 cm or in square or rectangular sheets with one side > 36 cm and the other side > 15 cm in the unfolded state, weighing > 150 g to < 225 g/m2, n.e.s. |
|
4806 10 |
vegetable parchment, in rolls of a width > 36 cm or in square or rectangular sheets with one side > 36 cm and the other side > 15 cm in the unfolded state |
|
4806 20 |
greaseproof papers, in rolls of a width > 36 cm or in square or rectangular sheets with one side > 36 cm and the other side > 15 cm in the unfolded state |
|
4806 30 |
tracing papers, in rolls of a width > 36 cm or in square or rectangular sheets with one side > 36 cm and the other side > 15 cm in the unfolded state |
|
4806 40 |
glassine and other glazed transparent or translucent papers, in rolls of a width > 36 cm or in square or rectangular sheets with one side > 36 cm and the other side > 15 cm in the unfolded state (excl. vegetable parchment, greaseproof papers and tracing papers) |
|
4807 00 |
composite paper and paperboard "made by sticking flat layers of paper or paperboard together with an adhesive", not surface-coated or impregnated, whether or not internally reinforced, in rolls of a width > 36 cm or in square or rectangular sheets with one side > 36 cm and the other side > 15 cm in the unfolded state |
|
4808 90 |
paper and paperboard, creped, crinkled, embossed or perforated, in rolls of a width > 36 cm or in square or rectangular sheets with one side > 36 cm and the other side > 15 cm in the unfolded state (excl. sack kraft and other kraft paper, and goods of heading 4803 ) |
|
4809 20 |
self-copy paper, whether or not printed, in rolls of a width > 36 cm or in square or rectangular sheets with one side > 36 cm and the other side > 15 cm in the unfolded state (excl. carbon and similar copying papers) |
|
4810 13 |
paper and paperboard used for writing, printing or other graphic purposes, not containing fibres obtained by a mechanical or chemi-mechanical process or of which <= 10% by weight of the total fibre content consists of such fibres, coated on one or both sides with kaolin or other inorganic substances, in rolls of any size |
|
4810 19 |
paper and paperboard used for writing, printing or other graphic purposes, not containing fibres obtained by a mechanical or chemi-mechanical process or of which <= 10% by weight of the total fibre content consists of such fibres, coated on one or both sides with kaolin or other inorganic substances, in square or rectangular sheets with one side > 435 mm or with one side <= 435 mm and the other side > 297 mm in the unfolded state |
|
4810 22 |
lightweight coated paper used for writing, printing or other graphic purposes, total weight <= 72 g/m2, coating weight <= 15 g/m2 per side, on a base of which >= 50% by weight of the total fibre content consists of fibres obtained by a mechanical process, coated on both sides with kaolin or other inorganic substances, in rolls or in square or rectangular sheets, of any size |
|
4810 31 |
kraft paper and paperboard, bleached uniformly throughout the mass and containing > 95% chemically processed wood fibres by weight in relation to the total fibre content, coated on one or both sides with kaolin or other inorganic substances, in rolls or in square or rectangular sheets, of any size, weighing <= 150 g/m2 (excl. that for writing, printing or other graphic purposes) |
|
4810 39 |
kraft paper and paperboard, coated on one or both sides with kaolin or other inorganic substances, in rolls or in square or rectangular sheets, of any size (excl. that for writing, printing or other graphic purposes; paper and paperboard bleached uniformly in the mass and containing > 95% chemically processed wood fibres by weight in relation to the total fibre content) |
|
4810 92 |
multi-ply paper and paperboard, coated on one or both sides with kaolin or other inorganic substances, in rolls or in square or rectangular sheets, of any size (excl. that for writing, printing or other graphic purposes, kraft paper and paperboard) |
|
4810 99 |
paper and paperboard, coated on one or both sides with kaolin "china clay" or other inorganic substances, with or without a binder, and with no other coating, whether or not surface-coloured, surface-decorated or printed, in rolls or in square or rectangular sheets, of any size (excl. that for writing, printing or other graphic purposes, kraft paper and paperboard, multi-ply paper and paperboard, and with no other coating) |
|
4811 10 |
tarred, bituminised or asphalted paper and paperboard, in rolls or in square or rectangular sheets, of any size |
|
4811 51 |
paper and paperboard, surface-coloured, surface-decorated or printed, coated, impregnated or covered with artificial resins or plastics, in rolls or in square or rectangular sheets, of any size, bleached and weighing > 150 g/m2 (excl. adhesives) |
|
4811 59 |
paper and paperboard, surface-coloured, surface-decorated or printed, coated, impregnated or covered with artificial resins or plastics, in rolls or in square or rectangular sheets, of any size (excl. bleached and weighing > 150 g/m2, and adhesives) |
|
4811 60 |
paper and paperboard, coated, impregnated or covered with wax, paraffin wax, stearin, oil or glycerol, in rolls or in square or rectangular sheets, of any size (excl. goods of heading 4803 , 4809 and 4818 ) |
|
4811 90 |
paper, paperboard, cellulose wadding and webs of soft cellulose, coated, impregnated, covered, surface-coloured, surface-decorated or printed, in rolls or in square or rectangular sheets, of any size (excl. goods of heading 4803 , 4809 , 4810 and 4818 , and of subheading 4811.10 to 4811.60) |
|
4814 90 |
wallpaper and similar wallcoverings of paper, and window transparencies of paper (excl. wallcoverings of paper, consisting of paper coated or covered, on the face side, with a grained, embossed, coloured or design-printed or otherwise decorated layer of plastics) |
|
4819 20 |
folding cartons, boxes and cases, of non-corrugated paper or paperboard |
|
4822 10 |
bobbins, spools, cops and similar supports of paper pulp, paper or paperboard, whether or not perforated or hardened, for winding textile yarn |
|
4823 20 |
filter paper and paperboard, in strips or rolls of a width <= 36 cm, in rectangular or square sheets, of which no side > 36 cm in the unfolded state, or cut to shape other than rectangular or square |
|
4823 40 |
rolls, sheets and dials, printed for self-recording apparatus, in rolls of a width <= 36 cm, in rectangular or square sheets of which no side > 36 cm in the unfolded state, or cut into dials |
|
4823 70 |
moulded or pressed articles of paper pulp, n.e.s. |
|
4906 00 |
plans and drawings for architectural, engineering, industrial, commercial, topographical or similar purposes, being originals drawn by hand; handwritten texts; photographic reproductions on sensitised paper and carbon copies of the foregoing |
|
5105 39 |
fine animal hair, carded or combed (excl. wool and hair of kashmir "cashmere" goats) |
|
5105 40 |
coarse animal hair, carded or combed |
|
5106 10 |
carded wool yarn containing >= 85% wool by weight (excl. that put up for retail sale) |
|
5106 20 |
carded wool yarn containing predominantly, but < 85% wool by weight (excl. that put up for retail sale) |
|
5107 20 |
yarn of combed wool containing predominantly, but < 85% wool by weight (excl. that put up for retail sale) |
|
5112 11 |
woven fabrics containing >= 85% combed wool or combed fine animal hair by weight and weighing <= 200 g/m2 (excl. fabrics for technical uses of heading 5911 ) |
|
5112 19 |
woven fabrics containing >= 85% combed wool or combed fine animal hair by weight and weighing > 200 g/m2 |
|
5205 21 |
single cotton yarn, of combed fibres, containing >= 85% cotton by weight and with a linear density of >= 714,29 decitex "<= mn 14" (excl. sewing thread and yarn put up for retail sale) |
|
5205 28 |
single cotton yarn, of combed fibres, containing >= 85% cotton by weight and with a linear density of < 83,33 decitex "> mn 120" (excl. sewing thread and yarn put up for retail sale) |
|
5205 41 |
multiple "folded" or cabled cotton yarn, of combed fibres, containing >= 85% cotton by weight and with a linear density of >= 714,29 decitex "<= mn 14" per single yarn (excl. sewing thread and yarn put up for retail sale) |
|
5206 42 |
multiple "folded" or cabled cotton yarn containing predominantly, but < 85% cotton by weight, of combed fibres and with a linear density of 232,56 decitex to < 714,29 decitex "> mn 14 to mn 43" per single yarn (excl. sewing thread and yarn put up for retail sale) |
|
5209 11 |
plain woven fabrics of cotton, containing >= 85% cotton by weight and weighing > 200 g/m2, unbleached |
|
5211 19 |
woven fabrics of cotton, containing predominantly, but < 85% cotton by weight, mixed principally or solely with man-made fibres and weighing > 200 g/m2, unbleached (excl. those in three-thread or four-thread twill, incl. cross twill, and plain woven fabrics) |
|
5211 51 |
plain woven fabrics of cotton, containing predominantly, but < 85% cotton by weight, mixed principally or solely with man-made fibres and weighing > 200 g/m2, printed |
|
5211 59 |
woven fabrics of cotton, containing predominantly, but < 85% cotton by weight, mixed principally or solely with man-made fibres and weighing > 200 g/m2, printed (excl. those in three-thread or four-thread twill, incl. cross twill, and plain woven fabrics) |
|
5308 20 |
hemp yarn |
|
5402 63 |
multiple "folded" or cabled filament yarn of polypropylene, incl. monofilament of < 67 decitex (excl. sewing thread, yarn put up for retail sale and textured yarn) |
|
5403 33 |
filament yarn of cellulose acetate, incl. monofilament of < 67 decitex, single (excl. sewing thread, high-tenacity yarn and yarn put up for retail sale) |
|
5403 42 |
multiple "folded" or cabled filament yarn of cellulose acetate, incl. monofilament of < 67 decitex (excl. sewing thread, high-tenacity yarn and yarn put up for retail sale) |
|
5404 12 |
polypropylene monofilament of >= 67 decitex and with a cross sectional dimension of <= 1 mm (excl. elastomers) |
|
5404 19 |
synthetic monofilament of >= 67 decitex and with a cross sectional dimension of <= 1 mm (excl. of elastomers and polypropylene) |
|
5404 90 |
strip and the like, e.g. artificial straw, of synthetic textile material, with an apparent width of <= 5 mm |
|
5407 30 |
woven fabrics of synthetic filament yarn, incl. monofilament of >= 67 decitex and with a cross sectional dimension of <= 1 mm, consisting of layers of parallel textile yarns superimposed on each other at acute or right angles, the layers being bonded at the intersections of the yarns by an adhesive or by thermal bonding |
|
5501 90 |
synthetic filament tow as specified in note 1 to chapter 55 (excl. that of acrylic, modacrylic, polyesters, polypropylene, nylon or other polyamide filament) |
|
5502 10 |
artificial filament tow as specified in note 1 to chapter 55, of acetate |
|
5503 19 |
staple fibres of nylon or other polyamides, not carded, combed or otherwise processed for spinning (excl. those of aramids) |
|
5503 40 |
staple fibres of polypropylene, not carded, combed or otherwise processed for spinning |
|
5504 90 |
artificial staple fibres, not carded, combed or otherwise processed for spinning (excl. those of viscose rayon) |
|
5506 40 |
staple fibres of polypropylene, carded, combed or otherwise processed for spinning |
|
5507 00 |
artificial staple fibres, carded, combed or otherwise processed for spinning |
|
5512 21 |
woven fabrics containing >= 85% acrylic or modacrylic staple fibres by weight, unbleached or bleached |
|
5512 99 |
woven fabrics containing >= 85% synthetic staple fibres by weight, dyed, made of yarn of different colours or printed (excl. those of acrylic, modacrylic or polyester staple fibres) |
|
5516 44 |
woven fabrics containing predominantly, but < 85% artificial staple fibres by weight, mixed principally or solely with cotton, printed |
|
5516 94 |
woven fabrics containing predominantly, but < 85% artificial staple fibres by weight, other than those mixed principally or solely with cotton, wool, fine animal hair or man-made filament, printed |
|
5601 29 |
wadding of textile materials and articles thereof (excl. of cotton or man-made fibres; sanitary towels and tampons, napkins and napkin liners for babies and similar sanitary articles, wadding and articles thereof, impregnated or covered with medicated substances or put up for retail for medical, surgical, dental or veterinary purposes, or impregnated, coated or covered with perfumes, make-up, soaps, cleansing agents, etc.) |
|
5601 30 |
textile flock and dust and mill neps |
|
5604 90 |
textile yarn, strip and the like of heading 5404 and 5405 , impregnated, coated, covered or sheathed with rubber or plastics (excl. imitation catgut, thread and cord with fish-hook attachments or otherwise put up as fishing line) |
|
5605 00 |
metallised yarn, whether or not gimped, being textile yarn, or strip or the like of heading 5404 or 5405 , of textile fibres, combined with metal in the form of thread, strip or powder or covered with metal (excl. yarns manufactured from a mixture of textile fibres and metal fibres, with anti-static properties; yarns reinforced with metal wire; articles with the character of trimmings) |
|
5607 41 |
binder or baler twine, of polyethylene or polypropylene |
|
5801 27 |
warp pile fabrics, of cotton (excl. terry towelling and similar woven terry fabrics, tufted textile fabrics and narrow woven fabrics of heading 5806 ) |
|
5803 00 |
gauze (excl. narrow woven fabrics of heading 5806 ) |
|
5806 40 |
narrow fabrics consisting of warp without weft assembled by means of an adhesive "bolducs", with a width of <= 30 cm |
|
5901 10 |
textile fabrics coated with gum or amylaceous substances, of a kind used for the outer covers of books, the manufacture of boxes and articles of cardboard or the like |
|
5905 00 |
textile wallcoverings |
|
5908 00 |
textile wicks, woven, plaited or knitted, for lamps, stoves, lighters, candles or the like; incandescent gas mantles and tubular knitted gas-mantle fabric for incandescent gas mantles, whether or not impregnated (excl. wax-covered wicks of the taper variety, fuses and detonating fuses, wicks in the form of textile yarn and glass-fibre wicks) |
|
5910 00 |
transmission or conveyor belts or belting, of textile material, whether or not impregnated, coated, covered or laminated with plastics, or reinforced with metal or other material (excl. those of a thickness of < 3 mm and of indeterminate length or cut to length only, and those impregnated, coated, covered or laminated with rubber or made of yarn or cord impregnated or coated with rubber) |
|
5911 10 |
textile fabrics, felt and felt-lined woven fabrics, coated, covered or laminated with rubber, leather or other material, of a kind used for card clothing, and similar fabrics of a kind used for other technical purposes, incl. narrow fabrics made of velvet impregnated with rubber, for covering weaving spindles "weaving beams" |
|
5911 31 |
textile fabrics and felts, endless or fitted with linking devices, of a kind used in papermaking or similar machines, e.g. for paper pulp or asbestos-cement, weighing < 650 g/m2 |
|
5911 32 |
textile fabrics and felts, endless or fitted with linking devices, of a kind used in papermaking or similar machines, e.g. for paper pulp or asbestos-cement, weighing >= 650 g/m2 |
|
5911 40 |
straining cloth of a kind used in oil-presses or for similar technical purposes, incl. that of human hair |
|
6001 99 |
pile fabrics, knitted or crocheted (excl. cotton or man-made fibres and "long pile" fabrics) |
|
6003 40 |
knitted or crocheted fabrics of artificial fibres, of a width of <= 30 cm (excl. those containing by weight >= 5% of elastomeric yarn or rubber thread, and pile fabrics, incl. "long pile", looped pile fabrics, labels, badges and similar articles, knitted or crocheted fabrics, impregnated, coated, covered or laminated, and sterile surgical or dental adhesion barriers of subheading 3006.10.30) |
|
6005 36 |
unbleached or bleached warp knit fabrics of synthetic fibres "incl. those made on galloon knitting machines", of a width of > 30 cm (excl. those containing by weight >= 5% of elastomeric yarn or rubber thread, and pile fabrics, incl. "long pile", looped pile fabrics, labels, badges and similar articles, and knitted or crocheted fabrics, impregnated, coated, covered or laminated) |
|
6005 44 |
printed warp knit fabrics of artificial fibres "incl. those made on galloon knitting machines", of a width of > 30 cm (excl. those containing by weight >= 5% of elastomeric yarn or rubber thread, and pile fabrics, incl. "long pile", looped pile fabrics, labels, badges and similar articles, and knitted or crocheted fabrics, impregnated, coated, covered or laminated) |
|
6006 10 |
fabrics, knitted or crocheted, of a width of > 30 cm, of wool or fine animal hair (excl. warp knit fabrics "incl. those made on galloon knitting machines", those containing by weight >= 5% of elastomeric yarn or rubber thread, and pile fabrics, incl. "long pile", looped pile fabrics, labels, badges and similar articles, and knitted or crocheted fabrics, impregnated, coated, covered or laminated) |
|
6309 00 |
worn clothing and clothing accessories, blankets and travelling rugs, household linen and articles for interior furnishing, of all types of textile materials, incl. all types of footwear and headgear, showing signs of appreciable wear and presented in bulk or in bales, sacks or similar packings (excl. carpets, other floor coverings and tapestries) |
|
6802 92 |
calcareous stone, in any form (excl. marble, travertine and alabaster, tiles, cubes and similar articles of subheading 6802.10, imitation jewellery, clocks, lamps and lighting fittings and parts thereof, original sculptures and statuary, setts, curbstones and flagstones) |
|
6804 23 |
millstones, grindstones, grinding wheels and the like, without frameworks, for sharpening, polishing, trueing or cutting, of natural stone (excl. of agglomerated natural abrasives or ceramics, perfumed pumice stones, hand sharpening or polishing stones, and grinding wheels etc. specifically for dental drill engines) |
|
6806 10 |
slag-wool, rock-wool and similar mineral wools, incl. intermixtures thereof, in bulk, sheets or rolls |
|
6806 90 |
mixtures and articles of heat-insulating, sound-insulating or sound absorbing mineral materials (excl. slag-wool, rock-wool and similar mineral wools, exfoliated vermiculite, expanded clays, foamed slag and similar expanded mineral materials, articles of light concrete, asbestos-cement, cellulose fibre-cement or the like, mixtures and other articles of or based on asbestos, and ceramic products) |
|
6807 10 |
articles of asphalt or of similar materials, e.g. petroleum bitumen or coal tar pitch, in rolls |
|
6807 90 |
articles of asphalt or of similar materials, e.g. petroleum bitumen or coal tar pitch (excl. in rolls) |
|
6809 19 |
boards, sheets, panels, tiles and similar articles, of plaster or compositions based on plaster (excl. ornamented, faced or reinforced with paper or paperboard only, and with plaster agglomerated articles for heat-insulation, sound-insulation or sound absorption) |
|
6810 91 |
prefabricated structural components for building or civil engineering of cement, concrete or artificial stone, whether or not reinforced |
|
6811 81 |
corrugated sheets of cellulose fibre-cement or the like, not containing asbestos |
|
6811 82 |
sheets, panels, paving, tiles and similar articles, of cellulose fibre-cement or the like, not containing asbestos (excl. corrugated sheets) |
|
6811 89 |
articles of cellulose fibre-cement or the like, not containing asbestos (excl. corrugated and other sheets, panels, tiles and similar articles) |
|
6813 89 |
friction material and articles thereof, e.g. sheets, rolls, strips, segments, discs, washers and pads, for clutches and the like, with a basis of mineral substances or cellulose, whether or not combined with textile or other materials (excl. containing asbestos, and brake linings and pads) |
|
6814 90 |
worked mica and articles of mica (excl. electrical insulators, insulating fittings, resistors and capacitors, protective goggles of mica and their glasses, mica in the form of christmas tree decorations, and plates, sheets and strips of agglomerated or reconstituted mica, whether or not on supports) |
|
6901 00 |
bricks, blocks, tiles and other ceramic goods of siliceous fossil meals, e.g. kieselguhr, tripolite or diatomite, or of similar siliceous earths |
|
6904 10 |
building bricks (excl. those of siliceous fossil meals or similar siliceous earths, and refractory bricks of heading 6902 ) |
|
6905 10 |
roofing tiles |
|
6905 90 |
ceramic chimney pots, cowls, chimney liners, architectural ornaments and other ceramic constructional goods (excl. of siliceous fossil meals or similar siliceous earths, refractory ceramic constructional components, pipes and other components for drainage and similar purposes, and roofing tiles) |
|
6906 00 |
ceramic pipes, conduits, guttering and pipe fittings (excl. of siliceous fossil meals or similar siliceous earths, refractory ceramic goods, chimney liners, pipes specifically manufactured for laboratories, insulating tubing and fittings and other piping for electrotechnical purposes) |
|
6907 22 |
ceramic flags and paving, hearth or wall tiles, of a water absorption coefficient by weight > 0,5 % but <= 10 % (excl. mosaic cubes and finishing ceramics) |
|
6907 40 |
finishing ceramics |
|
6909 90 |
ceramic troughs, tubs and similar receptacles of a kind used in agriculture; ceramic pots, jars and similar articles of a kind used for the conveyance or packing of goods (excl. general-purpose storage vessels for laboratories, containers for shops and household articles) |
|
7002 20 |
rods of glass, unworked |
|
7002 31 |
tubes of fused quartz or other fused silica, unworked |
|
7002 32 |
tubes of glass having a linear coefficient of expansion <= 5 x 10-6 per kelvin within a temperature range of 0°c to 300°c, unworked (excl. tubes of glass having a linear coefficient of expansion <= 5 x 10-6 per kelvin within a temperature range of 0°c to 300°c) |
|
7002 39 |
tubes of glass, unworked (excl. tubes of glass having a linear coefficient of expansion <= 5 x 10-6 per kelvin within a temperature range of 0°c to 300°c or of fused quartz or other fused silica) |
|
7003 30 |
profiles of glass, whether or not having an absorbent, reflecting or non-reflecting layer, but not otherwise worked |
|
7004 20 |
sheets of glass, drawn or blown, coloured throughout the mass "body tinted" opacified, flashed or having an absorbent, reflecting or non-reflecting layer, but not otherwise worked |
|
7005 10 |
float glass and surface ground or polished glass, in sheets, having an absorbent, reflecting or non-reflecting layer, but not otherwise worked (excl. wired glass) |
|
7005 30 |
float glass and surface ground and polished glass, in sheets, whether or not having an absorbent, reflecting or non-reflecting layer, wired, but not otherwise worked |
|
7007 11 |
toughened "tempered" safety glass, of size and shape suitable for incorporation in motor vehicles, aircraft, spacecraft, vessels and other vehicles |
|
7007 29 |
laminated safety glass (excl. glass of size and shape suitable for incorporation in motor vehicles, aircraft, spacecraft, vessels or other vehicles, multiple-walled insulating units) |
|
7011 10 |
glass envelopes, incl. bulbs and tubes, open, and glass parts thereof, without fittings, for electric lighting |
|
7202 92 |
ferro-vanadium |
|
7207 12 |
semi-finished products of iron or non-alloy steel containing, by weight, < 0,25% of carbon, of rectangular "other than square" cross-section, the width measuring >= twice the thickness |
|
7208 25 |
flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, in coils, simply hot-rolled, not clad, plated or coated, of a thickness of >= 4,75 mm, pickled, without patterns in relief |
|
7208 90 |
flat-rolled products of iron or steel, of a width >= 600 mm, hot-rolled and further worked, but not clad, plated or coated |
|
7209 25 |
flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, not in coils, simply cold-rolled "cold-reduced", not clad, plated or coated, of a thickness of >= 3 mm |
|
7209 28 |
flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, not in coils, simply cold-rolled "cold-reduced", not clad, plated or coated, of a thickness of < 0,5 mm |
|
7210 90 |
flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced", clad, plated or coated (excl. tinned, plated or coated with lead, zinc, chromium oxides, chromium and chromium oxides, or aluminium, painted, varnished or coated with plastics) |
|
7211 13 |
flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as "wide flats" |
|
7211 14 |
flat-rolled products of iron or non-alloy steel, of a width < 600 mm, not further worked than hot-rolled, not clad, plated or coated, of a thickness of >= 4,75 mm (excl. "wide flats") |
|
7211 29 |
flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, simply cold-rolled "cold-reduced", not clad, plated or coated, containing by weight >= 0,25% of carbon |
|
7212 10 |
flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", tinned |
|
7212 60 |
flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", clad |
|
7213 20 |
bars and rods, hot-rolled, in irregularly wound coils, of non-alloy free-cutting steel (excl. bars and rods containing indentations, ribs, grooves or other deformations produced during the rolling process) |
|
7213 99 |
bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel (excl. products of circular cross-section measuring < 14 mm in diameter, bars and rods of free-cutting steel, and bars and rods with indentations, ribs, grooves or other deformations produced during the rolling process) |
|
7215 50 |
bars and rods, of iron or non-alloy steel, not further worked than cold-formed or cold-finished (excl. of free-cutting steel) |
|
7216 10 |
u, i or h sections of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or extruded, of a height of < 80 mm |
|
7216 22 |
t sections of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or extruded, of a height of < 80 mm |
|
7216 33 |
h sections of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, of a height >= 80 mm |
|
7216 69 |
angles, shapes and sections, of iron or non-alloy steel, not further worked than cold-formed or cold-finished (excl. profiled sheet) |
|
7218 91 |
semi-finished products of stainless steel, of rectangular "other than square" cross-section |
|
7219 24 |
flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of < 3 mm |
|
7222 30 |
other bars and rods of stainless steel, cold-formed or cold-finished and further worked, or not further worked than forged, or forged, or hot-formed by other means and further worked |
|
7224 10 |
steel, alloy, other than stainless, in ingots or other primary forms (excl. waste and scrap in ingot form, and products obtained by continuous casting) |
|
7225 19 |
flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, non-grain-oriented |
|
7225 30 |
flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, in coils (excl. products of silicon-electrical steel) |
|
7225 99 |
flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked (excl. plated or coated with zinc and products of silicon-electrical steel) |
|
7226 91 |
flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, not further worked than hot-rolled (excl. products of high-speed steel or silicon-electrical steel) |
|
7228 30 |
bars and rods of alloy steel other than stainless, not further worked than hot-rolled, hot-drawn or extruded (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) |
|
7228 60 |
bars and rods of alloy steel other than stainless, cold-formed or cold-finished and further worked or hot-formed and further worked, n.e.s. (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) |
|
7228 70 |
angles, shapes and sections of alloy steel other than stainless, n.e.s. |
|
7228 80 |
hollow drill bars and rods, of alloy or non-alloy steel |
|
7229 90 |
wire of alloy steel other than stainless, in coils (excl. bars and rods and wire of silico-manganese steel) |
|
7301 20 |
angles, shapes and sections, of iron or steel, welded |
|
7304 24 |
casing and tubing, seamless, of a kind used for drilling for oil or gas, of stainless steel |
|
7305 39 |
tubes and pipes having circular cross-sections and an external diameter of > 406,4 mm, of iron or steel, welded (excl. products longitudinally welded or of a kind used for oil or gas pipelines or of a kind used in drilling for oil or gas) |
|
7306 50 |
Tubes, pipes and hollow profiles, welded, of circular cross-section, of alloy steel other than stainless (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas) |
|
7307 22 |
Threaded elbows, bends and sleeves |
|
7309 00 |
Reservoirs, tanks, vats and similar containers for any material (other than compressed or liquefied gas), of iron or steel, of a capacity exceeding 300 l, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment |
|
7314 12 |
Endless bands of stainless steel wire, for machinery |
|
7318 24 |
Cotters and cotter pins, of iron or steel |
|
7320 20 |
Helical springs, of iron or steel (excl. flat spiral springs, clock and watch springs, springs for sticks and handles of umbrellas or parasols, and shock absorbers of section 17) |
|
7322 90 |
Air heaters and hot-air distributors, incl. distributors which can also distribute fresh or conditioned air, non-electrically heated, incorporating a motor-driven fan or blower, and parts thereof, of iron or steel |
|
7324 29 |
baths of steel sheet |
|
7407 10 |
bars, rods and profiles, of refined copper |
|
7408 11 |
wire of refined copper, with a maximum cross-sectional dimension of > 6 mm |
|
7408 19 |
wire of refined copper, with a maximum cross-sectional dimension of <= 6 mm |
|
7409 11 |
plates, sheets and strip, of refined copper, in coils, of a thickness of > 0,15 mm (excl. expanded sheet and strip and electrically insulated strip) |
|
7409 19 |
plates, sheets and strip, of refined copper, not in coils, of a thickness of > 0,15 mm (excl. expanded sheet and strip and electrically insulated strip) |
|
7409 40 |
plates, sheets and strip, of copper-nickel base alloys "cupro-nickel" or copper-nickel-zinc base alloys "nickel silver", of a thickness of > 0,15 mm (excl. expanded sheet and strip and electrically insulated strip) |
|
7411 29 |
tubes and pipes of copper alloys (excl. copper-zinc base alloys "brass", copper-nickel base alloys "cupro-nickel" and copper-nickel-zinc base alloys "nickel silver") |
|
7415 21 |
washers, "incl. spring washers and spring lock washers", of copper |
|
7505 11 |
bars, rods, profiles and wire, of non-alloy nickel, n.e.s. (excl. electrically insulated products) |
|
7505 21 |
wire of non-alloy nickel (excl. electrically insulated products) |
|
7506 10 |
plates, sheets, strip and foil, of non-alloy nickel (excl. expanded plates, sheets or strip) |
|
7507 11 |
tubes and pipes of non-alloy nickel |
|
7508 90 |
articles of nickel |
|
7605 19 |
Wire of non-alloy aluminium, with a maximum cross-sectional dimension of <= 7 mm (other than stranded wires, cables, ropes and other articles of heading 7614 , electrically insulated wires, strings for musical instruments) |
|
7605 29 |
Wire, of aluminium alloys, having a maximum cross-sectional dimension of <= 7 mm (other than stranded wires, cables, ropes and other articles of heading 7614 , electrically insulated wires, strings for musical instruments) |
|
7606 92 |
Plates, sheets and strip, of aluminium alloys, of a thickness of > 0,2 mm (other than square or rectangular) |
|
7607 20 |
Aluminium foil, backed, of a thickness (excl. any backing) of <= 0,2 mm (excl. stamping foils of heading 3212 , and foil made up as christmas tree decorating material) |
|
7611 00 |
Reservoirs, tanks, vats and similar containers, of aluminium, for any material (other than compressed or liquefied gas), of a capacity of > 300 l, not fitted with mechanical or thermal equipment, whether or not lined or heat-insulated (excl. containers specifically constructed or equipped for one or more types of transport) |
|
7612 90 |
casks, drums, cans, boxes and similar containers, incl. rigid tubular containers, of aluminium, for any material (other than compressed or liquefied gas), of a capacity of <= 300 l, n.e.s. |
|
7613 00 |
Aluminium containers for compressed or liquefied gas |
|
7616 10 |
Nails, tacks, staples (other than those of heading 8305 ), screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles |
|
7804 11 |
Lead plates, sheets, strip and foil; lead powders and flakes - Plates, sheets, strip and foil - Sheets, strip and foil of a thickness (excluding any backing) not exceeding 0,2 mm |
|
7804 19 |
Lead plates, sheets, strip and foil; lead powders and flakes - Plates, sheets, strip and foil - Other |
|
7905 00 |
zinc plates, sheets, strip and foil |
|
8001 20 |
unwrought tin alloys |
|
8003 00 |
Tin bars, rods, profiles and wire |
|
8007 00 |
Articles of tin |
|
8101 10 |
tungsten powders |
|
8102 97 |
Molybdenum waste and scrap (excl. ash and residues containing molybdenum) |
|
8105 90 |
Articles of cobalt |
|
8109 31 |
Zirconium waste and scrap - Containing less than 1|part hafnium to|500|parts zirconium by weight |
|
8109 39 |
Zirconium waste and scrap - Other |
|
8109 91 |
Articles of zirconium - Containing less than 1|part hafnium to|500|part zirconium by weight |
|
8109 99 |
Articles of zirconium - Other |
|
8202 20 |
Bandsaw blades of base metal |
|
8207 60 |
Tools for boring or broaching |
|
8208 10 |
Knives and cutting blades, for machines or for mechanical appliances - for metalworking |
|
8208 20 |
Knives and cutting blades, for machines or for mechanical appliances - for wood-working |
|
8208 30 |
Knives and cutting blades, for machines or for mechanical appliances - used by the food industry |
|
8208 90 |
Knives and cutting blades, for machines or for mechanical appliances - other |
|
8301 20 |
locks used for motor vehicles, of base metal |
|
8301 70 |
Keys presented separately |
|
8302 30 |
Other mountings, fittings and similar articles suitable for motor vehicles |
|
8307 10 |
flexible tubing of iron or steel, with or without fittings |
|
8309 90 |
Stoppers, caps and lids, incl. screw caps and pouring stoppers, capsules for bottles, threaded bungs, bung covers, seals and other packing accessories of base metal (excl. crow corks) |
|
8402 12 |
Watertube boilers with a steam production not exceeding 45 tonnes per hour |
|
8402 19 |
Other vapour generating boilers, including hybrid boilers |
|
8402 20 |
Superheated water boilers |
|
8402 90 |
Steam or other vapour generating boilers (other than central heating hot water boilers capable also of producing low pressure steam); superheated water boilers - Parts |
|
8404 10 |
Auxiliary plant for use with boilers of heading 8402 or 8403 , e.g. economizers, superheaters, soot removers and gas recoverers; |
|
8404 20 |
Condensers for steam or other vapour power units |
|
8404 90 |
Producer gas or water gas generators, with or without their purifiers; acetylene gas generators and similar water process gas generators, with or without their purifiers - Parts |
|
8405 90 |
parts of producer gas or water gas generators and acetylene gas generators or similar water process gas generators, n.e.s. |
|
8406 90 |
Steam turbines and other vapour turbines - Parts |
|
8412 10 |
Reaction engines other than turbojets |
|
8412 21 |
Engines and motors - linear acting (cylinders) |
|
8412 29 |
Hydraulic power engines and motors - Other |
|
8412 39 |
Pneumatic power engines and motors - Other |
|
8414 90 |
Air or vacuum pumps, air or other gas compressors and fans; ventilating or recycling hoods incorporating a fan, whether or not fitted with filters; gas-tight biological safety cabinets, whether or not fitted with filters - Parts |
|
8415 83 |
Other air-conditioning machines, comprising a motor-driven fan and elements for changing the temperature and humidity, including those machines in which the humidity cannot be separately regulated - not incorporating a refrigerating unit |
|
8416 10 |
furnace burners for liquid fuel |
|
8416 20 |
Furnace burners for pulverised solid fuel or gas, incl. combination burners |
|
8416 30 |
Mechanical stokers, incl. their mechanical grates, mechanical ash dischargers and similar appliances (excl. burners) |
|
8416 90 |
Parts of furnace burners such as mechanical stokers, incl. their mechanical grates, mechanical ash dischargers and similar appliances |
|
8417 20 |
Bakery ovens, incl. biscuit ovens, non-electric |
|
8419 19 |
instantaneous or storage water heaters, non-electric (excl. instantaneous gas water heaters and boilers or water heaters for central heating) |
|
8420 99 |
Parts of calendering or other rolling machines, other than for metals or glass, and cylinders therefor - Other |
|
8421 19 |
Centrifuges, including centrifugal dryers - other |
|
8421 91 |
Parts of centrifuges, incl. centrifugal dryers |
|
8424 89 40 |
Mechanical appliances for projecting, dispersing, or spraying of a kind used solely or principally for the manufacture of printed circuits or printed circuit assemblies |
|
8424 90 20 |
Parts of mechanical appliances of subheading 8424 89 40 |
|
8425 11 |
Pulley tackle and hoists other than skip hoists or hoists of a kind used for raising vehicles powered by electric motor |
|
8426 12 |
Mobile lifting frames on tyres and straddle carriers |
|
8426 99 |
Ships' derricks; cranes, including cable cranes; mobile lifting frames, straddle carriers and works trucks fitted with a crane - Other |
|
8428 20 |
Pneumatic elevators and conveyors |
|
8428 32 |
Other continuous-action elevators and conveyors, for goods or materials - Other, bucket type |
|
8428 33 |
Other continuous-action elevators and conveyors, for goods or materials - Other, belt type |
|
8428 90 |
Other machinery |
|
8429 19 |
Bulldozers and angledozers - Other |
|
8429 59 |
Mechanical shovels, excavators and shovel loaders - Other |
|
8430 10 |
Piledrivers and pile extractors |
|
8430 39 |
Coal or rock cutters and tunnelling machinery - Other |
|
8439 10 |
Machinery for making pulp of fibrous cellulosic material |
|
8439 30 |
Machinery for finishing paper or paperboard |
|
8440 90 |
Bookbinding machinery, including book-sewing machines - Parts |
|
8441 30 |
Machines for making cartons, boxes, cases, tubes, drums or similar containers, other than by moulding |
|
8442 40 |
Parts of the foregoing machinery, apparatus or equipment |
|
8443 13 |
Other offset printing machinery |
|
8443 15 |
Letterpress printing machinery, other than reel fed, excluding flexographic printing |
|
8443 16 |
Flexographic printing machinery |
|
8443 17 |
Gravure printing machinery |
|
8443 91 |
Parts and accessories of printing machinery used for printing by means of plates, cylinders and other printing components of heading 8442 |
|
8444 00 |
Machines for extruding, drawing, texturing or cutting man-made textile materials |
|
8448 11 |
Dobbies and jacquards; card-reducing, copying, punching or assembling machines for use therewith |
|
8448 19 |
Auxiliary machinery for machines of heading 8444 , 8445 , 8446 or 8447 - Other |
|
8448 33 |
Spindles, spindle flyers, spinning rings and ring travellers |
|
8448 42 |
Reeds for looms, healds and heald-frames |
|
8448 49 |
Parts and accessories of weaving machines (looms) or of their auxiliary machinery - Other |
|
8448 51 |
Sinkers, needles and other articles used in forming stitches |
|
8451 10 |
Dry-cleaning machines |
|
8451 29 |
Drying machines - Other |
|
8451 30 |
Ironing machines and presses (including fusing presses) |
|
8451 90 |
Machinery (other than machines of heading 8450 ) for washing, cleaning, wringing, drying, ironing, pressing (including fusing presses), bleaching, dyeing, dressing, finishing, coating or impregnating textile yarns, fabrics or made-up textile articles and machines for applying the paste to the base fabric or other support used in the manufacture of floor coverings such as linoleum; machines for reeling, unreeling, folding, cutting or pinking textile fabrics - Parts |
|
8453 10 |
Machinery for preparing, tanning or working hides, skins or leather |
|
8453 80 |
Other machinery |
|
8453 90 |
Machinery for preparing, tanning or working hides, skins or leather or for making or repairing footwear or other articles of hides, skins or leather, other than sewing machines - Parts |
|
8454 10 |
Converters |
|
8459 10 |
Way-type unit head machines |
|
8459 70 |
Other threading or tapping machines |
|
8461 20 |
Shaping or slotting machines, for working metals, metal carbides or cermets |
|
8461 30 |
Broaching machines, for working metals, metal carbides or cermets |
|
8461 40 |
Gear-cutting, gear-grinding or gear-finishing machines |
|
8461 90 |
Machine tools for planing, shaping, slotting, broaching, gear cutting, gear grinding or gear finishing, sawing, cutting-off and other machine tools working by removing metal or cermets, not elsewhere specified or included - Other |
|
8465 20 |
Machining centres |
|
8465 93 |
Grinding, sanding or polishing machines |
|
8465 94 |
Bending or assembling machines |
|
8466 10 |
Tool holders and self-opening dieheads |
|
8466 91 |
Other parts and accessories suitable for use solely or principally with the machines of headings 8456 to 8465 , including work or tool holders, self- opening dieheads, dividing heads and other special attachments for the machines; tool holders for any type of tool for working in the hand - For machines of heading 8464 |
|
8466 92 |
Other parts and accessories suitable for use solely or principally with the machines of headings 8456 to 8465 , including work or tool holders, self- opening dieheads, dividing heads and other special attachments for the machines; tool holders for any type of tool for working in the hand - For machines of heading 8465 |
|
8472 10 |
Duplicating machines |
|
8472 30 |
Machines for sorting or folding mail or for inserting mail in envelopes or bands, machines for opening, closing or sealing mail and machines for affixing or cancelling postage stamps |
|
8473 21 |
Parts and accessories of the electronic calculating machines of subheading 8470 10 , 8470 21 or 8470 29 |
|
8474 10 |
Sorting, screening, separating or washing machines |
|
8474 39 |
Mixing or kneading machines - Other |
|
8474 80 |
Machinery for sorting, screening, separating, washing, crushing, grinding, mixing or kneading earth, stone, ores or other mineral substances, in solid (including powder or paste) form; machinery for agglomerating, shaping or moulding solid mineral fuels, ceramic paste, unhardened cements, plastering materials or other mineral products in powder or paste form; machines for forming foundry moulds of sand - Other machinery |
|
8475 21 |
Machines for making optical fibres and preforms thereof |
|
8475 29 |
Machines for manufacturing or hot working glass or glassware - Other |
|
8475 90 |
Machines for assembling electric or electronic lamps, tubes or valves or flashbulbs, in glass envelopes; machines for manufacturing or hot working glass or glassware - Parts |
|
8477 40 |
Vacuum-moulding machines and other thermoforming machines |
|
8477 51 |
For moulding or retreading pneumatic tyres or for moulding or otherwise forming inner tubes |
|
8479 10 |
Machinery for public works, building or the like |
|
8479 30 |
Presses for the manufacture of particle board or fibre building board of wood or other ligneous materials and other machinery for treating wood or cork |
|
8479 50 |
Industrial robots, not elsewhere specified or included |
|
8479 90 |
Machines and mechanical appliances having individual functions, not specified or included elsewhere in Chapter 84 - Parts |
|
8480 20 |
Mould bases |
|
8480 30 |
Moulding patterns |
|
8480 60 |
Moulds for mineral materials |
|
8481 10 |
Pressure-reducing valves |
|
8481 20 |
Valves for oleohydraulic or pneumatic transmissions |
|
8481 40 |
Safety or relief valves |
|
8482 20 |
Tapered roller bearings, including cone and tapered roller assemblies |
|
8482 91 |
Balls, needles and rollers |
|
8482 99 |
Other parts |
|
8484 10 |
Gaskets and similar joints of metal sheeting combined with other material or of two or more layers of metal |
|
8484 20 |
Mechanical seals |
|
8484 90 |
Gaskets and similar joints of metal sheeting combined with other material or of two or more layers of metal; sets or assortments of gaskets and similar joints, dissimilar in composition, put up in pouches, envelopes or similar packings; mechanical seals - Other |
|
8501 33 |
Other DC motors; DC generators, other than photovoltaic generators - of an output exceeding 75 kW but not exceeding 375 kW |
|
8501 62 |
AC generators (alternators), other than photovoltaic generators of an output exceeding 75 kVA but not exceeding 375 kVA |
|
8501 63 |
AC generators (alternators), other than photovoltaic generators of an output exceeding 375 kVA but not exceeding 750 kVA |
|
8501 64 |
AC generators (alternators), other than photovoltaic generators of an output exceeding 750 kVA |
|
8502 31 |
Generating sets, wind-powered |
|
8502 39 |
Other generating sets - Other |
|
8502 40 |
Electric rotary converters |
|
8504 33 |
Transformers having a power handling capacity exceeding 16 kVA but not exceeding 500 kVA |
|
8504 34 |
Transformers having a power handling capacity exceeding 500 kVA |
|
8505 20 |
Electromagnetic couplings, clutches and brakes |
|
8506 90 |
Primary cells and primary batteries - Parts |
|
8507 30 |
Electric accumulators, including separators therefor, whether or not rectangular (including square) - Nickel-cadmium |
|
8514 31 |
Electron beam furnaces |
|
8525 50 |
Transmission apparatus |
|
8530 90 |
Electrical signalling, safety or traffic control equipment for railways, tramways, roads, inland waterways, parking facilities, port installations or airfields (other than those of heading 8608 ) - Parts |
|
8532 10 |
Fixed capacitors designed for use in 50/60 hz circuits and having a reactive power-handling capacity of >= 0,5 kvar "power capacitors" |
|
8533 29 |
Other fixed resistors - Other |
|
8535 30 |
Isolating switches and make-and-break switches |
|
8535 90 |
Electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits (for example, switches, fuses, lightning arresters, voltage limiters, surge suppressors, plugs and other connectors, junction boxes), for a voltage exceeding 1 000 V - Other |
|
8539 41 |
Arc lamps |
|
8540 20 |
Television camera tubes; image converters and intensifiers; other photocathode tubes |
|
8540 60 |
Other cathode ray tubes |
|
8540 79 |
Microwave tubes (for example, magnetrons, klystrons, travelling-wave tubes, carcinotrons), excluding grid-controlled tubes - Other |
|
8540 81 |
Receiver or amplifier valves and tubes |
|
8540 89 |
Other valves and tubes - Other |
|
8540 91 |
Parts of cathode ray tubes |
|
8540 99 |
Other parts |
|
8543 10 |
Particle accelerators |
|
8547 90 |
Insulating fittings for electrical machines, appliances or equipment, being fittings wholly of insulating material apart from any minor components of metal (for example, threaded sockets) incorporated during moulding solely for purposes of assembly, other than insulators of heading 8546 ; electrical conduit tubing and joints therefor, of base metal lined with insulating material - Other |
|
8602 90 |
Other rail locomotives (excl. those powered from an external source of electricity or by accumulators and diesel-electric locomotives) |
|
8604 00 |
Railway or tramway maintenance or service vehicles, whether or not self-propelled (for example, workshops, cranes, ballast tampers, trackliners, testing coaches and track inspection vehicles) |
|
8606 92 |
Other railway or tramway goods vans and wagons, not self-propelled - Open, with non-removable sides of a height exceeding 60 cm |
|
8701 21 |
Road tractors for semi-trailers - With only compression-ignition internal combustion piston engine (diesel or semi-diesel) |
|
8701 22 |
Road tractors for semi-trailers - With both compression-ignition internal combustion piston engine (diesel or semi-diesel) and electric motor as motors for propulsion |
|
8701 23 |
Road tractors for semi-trailers - With both spark-ignition internal combustion piston engine and electric motor as motors for propulsion |
|
8701 24 |
Road tractors for semi-trailers - With only electric motor for propulsion |
|
8701 30 |
Track-laying tractors (excl. pedestrian-controlled) |
|
8704 10 |
Dumpers designed for off-highway use |
|
8704 22 |
Other motor vehicles for the transport of goods - of a gross vehicle weight exceeding 5 tonnes but not exceeding 20 tonnes: |
|
8704 32 |
Other motor vehicles for the transport of goods - of a gross vehicle weight exceeding 5 tonnes |
|
8705 20 |
Mobile drilling derricks |
|
8705 30 |
Fire fighting vehicles |
|
8705 90 |
Special purpose motor vehicles, other than those principally designed for the transport of persons or goods (for example, breakdown lorries, crane lorries, fire fighting vehicles, concrete-mixer lorries, road sweeper lorries, spraying lorries, mobile workshops, mobile radiological units) - Other |
|
8709 90 |
Works trucks, self-propelled, not fitted with lifting or handling equipment, of the type used in factories, warehouses, dock areas or airports for short distance transport of goods; tractors of the type used on railway station platforms; parts of the foregoing vehicles - Parts |
|
8716 20 |
Self-loading or self-unloading trailers and semi-trailers for agricultural purposes |
|
8716 39 |
Other trailers and semi-trailers for the transport of goods - Other |
|
9010 10 |
Apparatus and equipment for automatically developing photographic (including cinematographic) film or paper in rolls or for automatically exposing developed film to rolls of photographic paper |
|
9015 40 |
Photogrammetrical surveying instruments and appliances |
|
9015 80 |
Other instruments and appliances |
|
9015 90 |
Surveying (including photogrammetrical surveying), hydrographic, oceanographic, hydrological, meteorological or geophysical instruments and appliances, excluding compasses; rangefinders - Parts and acessories |
|
9029 10 |
Revolution counters, production counters, taximeters, milometers, pedometers and the like |
|
9031 20 |
Test benches |
|
9032 81 |
Other automatic regulating or controlling instruments and apparatus - Hydraulic or pneumatic - Other |
|
9401 10 |
Seats for aircraft |
|
9401 20 |
Seats for motor vehicles |
|
9403 30 |
Wooden furniture of a kind used in offices |
|
9406 10 |
Prefabricated buildings of wood |
|
9406 90 |
Prefabricated buildings, whether or not complete or already assembled - Other |
|
9606 30 |
Button moulds and other parts of buttons; button blanks |
|
9608 91 |
Pen nibs and nib points |
|
9612 20 |
Of man-made fibres, measuring less than 30 mm in width, permanently put in plastic or metal cartridges of a kind used in automatic typewriters, automatic data- processing equipment and other machines |
ANNEX XXIV
List of goods as referred to in Article 3ea(5)(a)
|
CN code |
Name of the good |
|
2810 00 10 |
Diboron trioxide |
|
2810 00 90 |
Oxides of boron; boric acids (excluding diboron trioxide) |
|
2812 15 00 |
Sulphur monochloride |
|
2814 10 00 |
Anhydrous ammonia |
|
2825 20 00 |
Lithium oxide and hydroxide |
|
2905 42 00 |
Pentaerythritol "pentaerythrite" |
|
2909 19 90 |
Ethers, acyclic and halogen, sulfo, nitro and nitroso derivatives thereof (excluding diethyl ether and tert-butyl ethyl ether (ethyl tertiary butyl ether, etbe)) |
|
3006 92 00 |
Waste pharmaceuticals |
|
3105 30 00 |
Diammonium hydrogenorthophosphate (excluding those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) |
|
3105 40 00 |
Ammonium dihydrogenorthophosphate and mixtures thereof with diammonium hydrogenorthophosphate (excluding those in tablets or similar forms, or in packages with a gross weight of <= 10 kg). |
|
3811 19 00 |
Anti-knock agents for petrol (excluding those based on lead compounds) |
|
ex 72 03 |
Direct reduced iron or other spongy iron |
|
ex 72 04 |
Ferrous scrap |
ANNEX XXV
List of crude oil and petroleum products referred to in articles 3m and 3n
|
CN Code |
Description |
|
2709 00 |
Petroleum oils and oils obtained from bituminous minerals, crude |
|
2710 |
Petroleum oils and oils obtained from bituminous minerals, other than crude; preparations not elsewhere specified or included, containing by weight 70 % or more of petroleum oils or of oils obtained from bituminous minerals, these oils being the basic constituents of the preparations; waste oils |
ANNEX XXVI
List of goods as referred to in article 3o(1) and (2)
|
|
CN code |
Name of the good |
|
|
7108 |
Gold (including gold plated with platinum), unwrought or in semi-manufactured forms, or in powder form |
|
|
7112 91 |
Waste and scrap of gold, including metal clad with gold but excluding sweepings containing other precious metals |
|
Ex |
7118 90 |
Gold coins |
ANNEX XXVII
List of goods as referred to in article 3o(3)
|
|
CN code |
Name of the good |
|
Ex |
7113 |
Articles of jewellery and parts thereof, of gold or containing gold, or of metal clad with gold |
|
Ex |
7114 |
Articles of goldsmiths’ or silversmiths’ wares and parts thereof, of gold, containing gold, or of metal clad with gold |
ANNEX XXVIII
Prices referred to in Article 3n(6)(a)
[table with product CN codes and corresponding prices as agreed by the Price Cap Coalition]
ANNEX XXIX
List of projects referred to in Article 3n(6)(c)
|
Scope of exemption |
Date of application |
Date of expiration |
|
The transport by vessel to Japan, the technical assistance, brokering services, financing or financial assistance related to such transport, of crude oil falling under CN 2709 00 commingled with condensate, originating in the Sakhalin-2 (Сахалин-2) Project, located in Russia |
5 December 2022 |
5 June 2023 |
( 1 ) Regulation (EU) 2021/821 of the European Parliament and of the Council of 20 May 2021 setting up a Union regime for the control of exports, brokering, technical assistance, transit and transfer of dual-use items (recast) (OJ L 206, 11.6.2021, p. 1).
( 2 ) Regulation (EU) No 909/2014 of the European Parliament and of the Council of 23 July 2014 on improving securities settlement in the European Union and on central securities depositories and amending Directives 98/26/EC and 2014/65/EU and Regulation (EU) No 236/2012 (OJ L 257, 28.8.2014, p. 1).
( 3 ) Directive 2014/65/EU of the European Parliament and of the Council of 15 May 2014 on markets in financial instruments and amending Directive 2002/92/EC and Directive 2011/61/EU (OJ L 173, 12.6.2014, p. 349).
( 4 ) Directive 2014/23/EU of the European Parliament and of the Council of 26 February 2014 on the award of concession contracts (OJ L 94, 28.3.2014, p. 1).
( 5 ) Directive 2014/24/EU of the European Parliament and of the Council of 26 February 2014 on public procurement and repealing Directive 2004/18/EC (OJ L 94, 28.3.2014, p. 65).
( 6 ) Directive 2014/25/EU of the European Parliament and of the Council of 26 February 2014 on procurement by entities operating in the water, energy, transport and postal services sectors and repealing Directive 2004/17/EC (OJ L 94, 28.3.2014, p. 243).
( 7 ) Directive 2009/81/EC of the European Parliament and of the Council of 13 July 2009 on the coordination of procedures for the award of certain works contracts, supply contracts and service contracts by contracting authorities or entities in the fields of defence and security, and amending Directives 2004/17/EC and 2004/18/EC (OJ L 216, 20.8.2009, p. 76).
( 8 ) Regulation (EU) No 258/2012 of the European Parliament and of the Council of 14 March 2012 implementing Article 10 of the United Nations’ Protocol against the illicit manufacturing of and trafficking in firearms, their parts and components and ammunition, supplementing the United Nations Convention against Transnational Organised Crime (UN Firearms Protocol), and establishing export authorisation, and import and transit measures for firearms, their parts and components and ammunition (OJ L 94, 30.3.2012, p. 1).
( 9 ) Directive 2013/53/EU of the European Parliament and of the Council of 20 November 2013 on recreational craft and personal watercraft and repealing Directive 94/25/EC (OJ L 354, 28.12.2013, p. 90)
( 10 ) Commission Implementing Regulation (EU) 2015/2447 of 24 November 2015 laying down detailed rules for implementing certain provisions of Regulation (EU) No 952/2013 of the European Parliament and of the Council laying down the Union Customs Code (OJ L 343 29.12.2015, p. 558).
( 11 ) Commission Implementing Regulation (EU) 2015/2447 of 24 November 2015 laying down detailed rules for implementing certain provisions of Regulation (EU) No 952/2013 of the European Parliament and of the Council laying down the Union Customs Code (OJ L 343, 29.12.2015, p. 558).
( 12 ) Latest version published in OJ C 107, 9.4.2014, p. 1.
( 13 ) Regulation (EC) No 391/2009 of the European Parliament and of the Council of 23 April 2009 on common rules and standards for ship inspection and survey organisations (OJ L 131 28.5.2009, p. 11).
( 14 ) Directive (EU) 2016/1629 of the European Parliament and of the Council of 14 September 2016 laying down technical requirements for inland waterway vessels, amending Directive 2009/100/EC and repealing Directive 2006/87/EC (OJ L 252, 16.9.2016, p. 118).
( 15 ) Regulation (EU, Euratom) 2018/1046 of the European Parliament and of the Council of 18 July 2018 on the financial rules applicable to the general budget of the Union, amending Regulations (EU) No 1296/2013, (EU) No 1301/2013, (EU) No 1303/2013, (EU) No 1304/2013, (EU) No 1309/2013, (EU) No 1316/2013, (EU) No 223/2014, (EU) No 283/2014, and Decision No 541/2014/EU and repealing Regulation (EU, Euratom) No 966/2012 (OJ L 193, 30.7.2018, p. 1).
( 16 ) Council Regulation (EU) No 269/2014 of 17 March 2014 concerning restrictive measures in respect of actions undermining or threatening the territorial integrity, sovereignty and independence of Ukraine (OJ L 78, 17.3.2014, p. 6).
( 17 ) Regulation (EU) 2018/1725 of the European Parliament and of the Council of 23 October 2018 on the protection of natural persons with regard to the processing of personal data by the Union institutions, bodies, offices and agencies and on the free movement of such data, and repealing Regulation (EC) No 45/2001 and Decision No 1247/2002/EC (OJ L 295, 21.11.2018, p. 39).
( 18 ) Regulation (EU) 2016/679 of the European Parliament and of the Council of 27 April 2016 on the protection of natural persons with regard to the processing of personal data and on the free movement of such data, and repealing Directive 95/46/EC (General Data Protection Regulation) (OJ L 119, 4.5.2016, p. 1).
( 19 ) Regulation (EU) 2018/1725 of the European Parliament and of the Council of 23 October 2018 on the protection of natural persons with regard to the processing of personal data by the Union institutions, bodies, offices and agencies and on the free movement of such data, and repealing Regulation (EC) No 45/2001 and Decision No 1247/2002/EC (OJ L 295, 21.11.2018, p. 39).
( 20 ) Ref. Annex I to Regulation (EU) 2021/821
( 21 ) Ref. Annex I to Regulation (EU) 2021/821
( 22 ) Ref. Annex I to Regulation (EU) 2021/821
( 23 ) Ref. Annex I to Regulation (EU) 2021/821
( 24 ) Ref. Annex I to Regulation (EU) 2021/821
( 25 ) Ref. Annex I to Regulation (EU) 2021/821
( 26 ) Ref. Annex I to Regulation (EU) 2021/821
( 27 ) Ref. Annex I to Regulation (EU) 2021/821
( 28 ) Ref. Annex I to Regulation (EU)2021/821
( 29 ) Ref. Annex I to Regulation (EU) 2021/821
( 30 ) Ref. Annex I to Regulation (EU) 2021/821
( 31 ) Ref. Annex I to Regulation (EU) 2021/821
( 32 ) Ref. Annex I to Regulation (EU) 2021/821
( 33 ) Ref. Annex I to Regulation (EU) 2021/821
( 34 ) Ref. Annex I to Regulation (EU) 2021/821
( 35 ) Ref. Annex I to Regulation (EU) 2021/821
( 36 ) Ref. Annex I to Regulation (EU) 2021/821
( 37 ) Ref. Annex I to Regulation (EU) 2021/821
( 38 ) Ref. Annex I to Regulation (EU) 2021/821
( 39 ) Ref. Annex I to Regulation (EU) 2021/821
( 40 ) Ref. Annex I to Regulation (EU) 2021/821
( 41 ) Ref. Annex I to Regulation (EU) 2021/821
( 42 ) Ref. Annex I to Regulation (EU) 2021/821
( 43 ) Council Regulation (EEC) No 2658/87 of 23 July 1987 on the tariff and statistical nomenclature and on the Common Customs Tariff (OJ L 256, 7.9.1987, p. 1).