Choose the experimental features you want to try

This document is an excerpt from the EUR-Lex website

Document 52020XC0214(06)

    Notice of initiation of an anti-dumping proceeding concerning imports of aluminium extrusions originating in the People’s Republic of China 2020/C 51/12

    C/2020/696

    OJ C 51, 14.2.2020, p. 26–42 (BG, ES, CS, DA, DE, ET, EL, EN, FR, HR, IT, LV, LT, HU, MT, NL, PL, PT, RO, SK, SL, FI, SV)

    14.2.2020   

    EN

    Official Journal of the European Union

    C 51/26


    Notice of initiation of an anti-dumping proceeding concerning imports of aluminium extrusions originating in the People’s Republic of China

    (2020/C 51/12)

    The European Commission (‘the Commission’) has received a complaint pursuant to Article 5 of Regulation (EU) 2016/1036 of the European Parliament and of the Council of 8 June 2016 on protection against dumped imports from countries not members of the European Union (1) (‘the basic Regulation’), alleging that imports of aluminium extrusions, originating in the People’s Republic of China are being dumped and are thereby causing injury (2) to the Union industry.

    1.   Complaint

    The complaint was lodged on 3 January 2020 by European Aluminium (‘the complainant’), on behalf of seven producers representing more than 25 % of the total Union production of aluminium extrusions.

    An open version of the complaint and the analysis of the degree of support by Union producers for the complaint are available in the file for inspection by interested parties. Section 5.6 of this Notice provides information about access to the file for interested parties.

    2.   Product under investigation

    The product subject to this investigation is bars, rods, profiles (whether or not hollow), tubes, pipes; unassembled; whether or not prepared for use in structures (e.g. cut-to-length, drilled, bent, chamfered, threaded); made from aluminium, whether or not alloyed, containing not more than 99,3 % of aluminium (‘the product under investigation’).

    The following products are not covered by this investigation:

    i.

    products attached (e.g. by welding or fasteners) to form subassemblies;

    ii.

    welded tubes and pipes;

    iii.

    products in a packaged kit with the necessary parts to assemble a finished product without further finishing or fabrication of the parts (‘finished goods kit’).

    All interested parties wishing to submit information on the product scope must do so within 10 days of the date of publication of this Notice (3).

    3.   Allegation of dumping

    The product allegedly being dumped is the product under investigation, originating in the People’s Republic of China (‘the PRC’) currently classified under CN codes ex 7604 10 10, ex 7604 10 90, 7604 21 00, 7604 29 10, 7604 29 90, ex 7608 10 00, 7608 20 81, 7608 20 89 and ex 7610 90 90 (TARIC codes 7604101011, 7604109011, 7604109025, 7604109080, 7608100011, 7608100080, 7610909010). The CN and TARIC codes are given for information only.

    The complainant claimed that it is not appropriate to use domestic prices and costs in the PRC (‘the country concerned’), due to the existence of significant distortions within the meaning of point (b) of Article 2(6a) of the basic Regulation.

    To substantiate the allegations of significant distortions, the complainant relied on the ‘Commission Staff Working Document on Significant Distortions in the Economy of the PRC’ dated 20 December 2017 (the ‘Commission report’), the report ‘Overcapacity in China: An impediment to the Party’s Reform Agenda’ issued by the EU Chamber of Commerce in Beijing and the OECD report ‘Measuring distortions in international markets - The aluminium value chain’. In the Commission report, the complainant refers to the specific section on aluminium, the major cost item in the production of aluminium extrusions, as well as to the chapters about general distortions regarding energy and electricity. The OECD report also evidenced that non-market forces, and government support in particular, appear to explain increased overcapacity in the aluminium industry in the PRC. Since Chinese aluminium capacities systematically exceed domestic demand, an increasing number of producers have – government-incentivised – focused primarily on export markets and in particular the EU. This overcapacity and the consequences thereof are also identified in the report issued by the EU Chamber of Commerce in Beijing.

    As a result, in view of Article 2(6a)(a) of the basic Regulation, the allegation of dumping is based on a comparison of a constructed normal value on the basis of costs of production and sale reflecting undistorted prices or benchmarks, with the export price (at ex-works level) of the product under investigation when sold for export to the Union. On that basis the dumping margins calculated are significant for the country concerned.

    In light of the information available, the Commission considers that there is sufficient evidence pursuant to Article 5(9) of the basic Regulation tending to show that, due to significant distortions affecting prices and costs, the use of domestic prices and costs in the country concerned is inappropriate, thus warranting the initiation of an investigation on the basis of Article 2(6a) of the basic Regulation.

    The Commission report is available in the file for inspection by interested parties and on DG Trade’s website in footnote (4). Both the OECD and the EU Chamber of Commerce in Beijing reports are part of the open version of the complaint and available in the file for inspection by interested parties.

    4.   Allegation of injury/causation and raw material distortions

    4.1.    Allegation of injury and causation

    The complainant has provided evidence that imports of the product under investigation from the country concerned have increased overall in absolute terms and in terms of market share.

    The evidence provided by the complainant shows that the volume and the prices of the imported product under investigation have had, among other consequences, a negative impact on the quantities sold and on the level of prices charged as well as on the market share held by the Union industry, resulting in substantial adverse effects on the overall performance of the Union industry.

    4.2.    Allegation of raw material distortions

    The complainant has provided the Commission sufficient evidence that there are raw material distortions in the country concerned regarding the product under investigation. Those distortions appear to result in prices that are lower than those quoted on international markets of the same product.

    According to the evidence in the complaint, billets of aluminium, which account for more than 60 % of the cost of production of the product under investigation, is subject to export taxes in the country concerned. On the basis of a comparison of prices quoted on the London Metals Exchange for billets of aluminium with those in the PRC, the complaint establishes that the export taxes on the product under investigation appear to result in prices below those of representative international markets.

    Therefore, in accordance with Article 7(2a) of the basic Regulation, the investigation will examine the alleged distortions to assess whether, if relevant, a duty lower than the margin of dumping would be sufficient to remove injury. Should other distortions covered by Article 7 (2a) of the basic Regulation be identified in the course of the investigation, the investigation may also cover these distortions.

    5.   Procedure

    Having determined, after informing the Member States, that the complaint has been lodged by or on behalf of the Union industry and that there is sufficient evidence to justify the initiation of a proceeding, the Commission hereby initiates an investigation pursuant to Article 5 of the basic Regulation.

    The investigation will determine whether the product under investigation originating in the country concerned is being dumped and whether the dumped imports have caused injury to the Union industry.

    If the conclusions are affirmative, the investigation will examine whether the imposition of measures would not be against the Union interest under Article 21 of the basic Regulation. In case of application of Article 7(2a), the investigation will examine the Union’s interest test under Article 7(2b) of the basic Regulation.

    Regulation (EU) 2018/825 of the European Parliament and of the Council (5), which entered into force on 8 June 2018 (TDI Modernisation package), introduced significant changes to the timetable and deadlines previously applicable in anti-dumping proceedings. The time-limits for interested parties to come forward, in particular at the early stage of investigations, are shortened.

    5.1.    Investigation period and period considered

    The investigation of dumping and injury will cover the period from 1 January 2019 to 31 December 2019 (‘the investigation period’). The examination of trends relevant for the assessment of injury will cover the period from 1 January 2016 to the end of the investigation period (‘the period considered’).

    5.2.    Comments on the complaint and the initiation of the investigation

    All interested parties are invited to make their views known on the factors of production/inputs and the Harmonised System (HS) codes provided in the complaint within 15 days of the date of publication of this Notice.

    All interested parties wishing to comment on the complaint (including matters pertaining to injury and causality) or any aspects regarding the initiation of the investigation (including the degree of support for the complaint) must do so within 37 days of the date of publication of this Notice.

    Any request for a hearing with regard to the initiation of the investigation must be submitted within 15 days of the date of publication of this Notice.

    5.3.    Procedure for the determination of dumping

    Exporting producers (6) of the product under investigation are invited to participate in the Commission investigation.

    5.3.1.   Investigating exporting producers

    5.3.1.1.   Procedure for selecting exporting producers to be investigated in the PRC

    (a)   Sampling

    In view of the potentially large number of exporting producers in the country concerned involved in this proceeding and in order to complete the investigation within the statutory time limits, the Commission may limit the exporting producers to be investigated to a reasonable number by selecting a sample (this process is also referred to as ‘sampling’). The sampling will be carried out in accordance with Article 17 of the basic Regulation.

    In order to enable the Commission to decide whether sampling is necessary, and if so, to select a sample, all exporting producers, or representatives acting on their behalf, are hereby requested to provide the Commission with information on their company(ies) requested in Annex I to this Notice within 7 days of the date of publication of this Notice.

    In order to obtain information it deems necessary for the selection of the sample of exporting producers, the Commission has also contacted the authorities of the PRC and may contact any known associations of exporting producers.

    If a sample is necessary, the exporting producers may be selected based on the largest representative volume of exports to the Union which can reasonably be investigated within the time available. All known exporting producers, the authorities of the PRC and associations of exporting producers will be notified by the Commission, via the authorities of the PRC if appropriate, of the companies selected to be in the sample.

    Once the Commission has received the necessary information to select a sample of exporting producers, it will inform the parties concerned of its decision whether they are included in the sample. The sampled exporting producers will have to submit a completed questionnaire within 30 days from the date of notification of the decision of their inclusion in the sample, unless otherwise specified.

    The Commission will add a note reflecting the sample selection to the file for inspection by interested parties. Any comment on the sample selection must be received within 3 days of the date of notification of the sample decision.

    A copy of the questionnaire for exporting producers is available in the file for inspection by interested parties and on DG Trade’s website https://trade.ec.europa.eu/tdi/case_details.cfm?id=2449.

    Without prejudice to the possible application of Article 18 of the basic Regulation, exporting producers that have filled in Annex I within the specified deadline and agreed to be included in the sample but are not selected as part of the sample will be considered to be cooperating (‘non-sampled cooperating exporting producers’). Without prejudice to section 5.3.1(b) below, the anti-dumping duty that may be applied to imports from non-sampled cooperating exporting producers will not exceed the weighted average margin of dumping established for the exporting producers in the sample (7).

    (b)   Individual dumping margin for exporting producers not included in the sample

    Pursuant to Article 17(3) of the basic Regulation, non-sampled cooperating exporting producers may request the Commission to establish their individual dumping margins. Exporting producers wishing to claim an individual dumping margin must fill in the questionnaire and return it duly completed within 30 days of the date of notification of the sample selection, unless otherwise specified. A copy of the questionnaire for exporting producers is available in the file for inspection by interested parties and on DG Trade’s website https://trade.ec.europa.eu/tdi/case_details.cfm?id=2449.

    The Commission will examine whether non-sampled cooperating exporting producers can be granted an individual duty in accordance with Article 9(5) of the basic Regulation.

    However, non-sampled cooperating exporting producers claiming an individual dumping margin should be aware that the Commission may nonetheless decide not to determine their individual dumping margin if, for instance, the number of non-sampled cooperating exporting producers is so large that such determination would be unduly burdensome and would prevent the timely completion of the investigation.

    5.3.2.   Additional procedure with regard to the country concerned subject to significant distortions

    Subject to the provisions of this Notice, all interested parties are hereby invited to make their views known, submit information and provide supporting evidence regarding the application of Article 2(6a) of the basic Regulation. Unless otherwise specified, this information and supporting evidence must reach the Commission within 37 days of the date of publication of this Notice.

    Pursuant to point (e) of Article 2(6a) of the basic Regulation, the Commission will shortly after initiation, by means of a note to the file for inspection by interested parties, inform parties to the investigation about the relevant sources, including the selection of an appropriate representative third country where appropriate, that it intends to use for the purpose of determining normal value pursuant to Article 2(6a). Parties to the investigation will be given 10 days to comment on the note, in accordance with point (e) of Article 2(6a). According to the information available to the Commission, possible appropriate representative third countries are Turkey, Mexico and Argentina. With the aim of finally selecting the appropriate representative third country, the Commission will examine whether there is a third country(ies) with similar level of economic development as the PRC, whether there is production and sales of the product under investigation in those third countries, and whether relevant data are readily available. Where there is more than one representative third country, preference will be given, where appropriate, to countries with an adequate level of social and environmental protection.

    In the context of this exercise, the Commission invites all exporting producers in the PRC to provide the information requested in Annex III to this Notice within 15 days of the date of publication of this Notice.

    Furthermore, any submissions of factual information to value costs and prices pursuant to point (a) of Article 2(6a) of the basic Regulation must be filed within 65 days of the date of publication of this Notice. Such factual information should be taken exclusively from publicly available sources.

    5.3.3.   Investigating unrelated importers (8) (9)

    Unrelated importers of the product under investigation from the PRC to the Union are invited to participate in this investigation.

    In view of the potentially large number of unrelated importers involved in this proceeding and in order to complete the investigation within the statutory time limits, the Commission may limit to a reasonable number the unrelated importers that will be investigated by selecting a sample (this process is also referred to as ‘sampling’). The sampling will be carried out in accordance with Article 17 of the basic Regulation.

    In order to enable the Commission to decide whether sampling is necessary and, if so, to select a sample, all unrelated importers, or representatives acting on their behalf, are hereby requested to provide the Commission with the information on their company(ies) requested in Annex II to this Notice within 7 days of the date of publication of this Notice.

    In order to obtain information it deems necessary for the selection of the sample of unrelated importers, the Commission may also contact any known associations of importers.

    If a sample is necessary, the importers may be selected based on the largest representative volume of sales of the product under investigation in the Union which can reasonably be investigated within the time available.

    Once the Commission has received the necessary information to select a sample, it will inform the parties concerned of its decision on the sample of importers. The Commission will also add a note reflecting the sample selection to the file for inspection by interested parties. Any comment on the sample selection must be received within 3 days of the date of notification of the sample decision.

    In order to obtain information it deems necessary for its investigation, the Commission will make available questionnaires to the sampled unrelated importers. Those parties must submit a completed questionnaire within 30 days from the date of the notification of the decision about the sample, unless otherwise specified.

    A copy of the questionnaire for importers is available in the file for inspection by interested parties and on DG Trade’s website https://trade.ec.europa.eu/tdi/case_details.cfm?id=2449.

    5.4.    Procedure for the determination of injury and investigating Union producers

    A determination of injury is based on positive evidence and involves an objective examination of the volume of the dumped imports, their effect on prices on the Union market and the consequent impact of those imports on the Union industry. In order to establish whether the Union industry is injured, Union producers of the product under investigation are invited to participate in the Commission investigation.

    In view of the large number of Union producers concerned and in order to complete the investigation within the statutory time limits, the Commission has decided to limit to a reasonable number the Union producers that will be investigated by selecting a sample (this process is also referred to as ‘sampling’). The sampling is carried out in accordance with Article 17 of the basic Regulation.

    The Commission has provisionally selected a sample of Union producers. Details can be found in the file for inspection by interested parties. Interested parties are hereby invited to comment on the provisional sample. In addition, other Union producers, or representatives acting on their behalf, that consider that there are reasons why they should be included in the sample must contact the Commission within 7 days of the date of publication of this Notice. All comments regarding the provisional sample must be received within 7 days of the date of publication of this Notice, unless otherwise specified.

    All known Union producers and/or associations of Union producers will be notified by the Commission of the companies finally selected to be in the sample.

    The sampled Union producers will have to submit a completed questionnaire within 30 days from the date of notification of the decision of their inclusion in the sample, unless otherwise specified.

    A copy of the questionnaire for Union producers is available in the file for inspection by interested parties and on DG Trade’s website https://trade.ec.europa.eu/tdi/case_details.cfm?id=2449.

    5.5.    Procedure for the assessment of Union interest in case of allegations of raw material distortions

    In cases of distortions on raw materials as identified in Article 7(2a) of the basic Regulation, the Commission will conduct a Union interest test as laid out in Article 7(2b) of that Regulation. If the Commission decides, when establishing the level of duties subject to Article 7 of that Regulation, to apply Article 7(2), it will carry out the Union-interest test in accordance with Article 21.

    Interested parties are invited to provide all pertinent information enabling the Commission to determine whether it is in the Union interest to set the level of the measures in accordance with Article 7(2a) of the basic Regulation. In particular, interested parties are invited to provide any information about spare capacities in the country concerned, competition for raw materials and the effect on supply chains for companies in the Union. In the absence of cooperation, the Commission may conclude that it is in accordance with the Union interest to apply Article 7(2a) of the basic Regulation.

    Should the Commission decide to apply Article 7(2) of the basic Regulation, a decision will be reached, pursuant to Article 21, as to whether the adoption of anti-dumping measures would not be against the Union interest. Union producers, importers and their representative associations, users and their representative associations, trade unions and representative consumer organisations are invited to provide the Commission with information on the Union interest. In order to participate in the investigation, representative consumer organisations have to demonstrate that there is an objective link between their activities and the product under investigation.

    Information concerning the assessment of Union interest must be provided within 37 days of the date of publication of this Notice unless otherwise specified. This information may be provided either in a free format or by completing a questionnaire prepared by the Commission. A copy of the questionnaires, including the questionnaire for users of the product under investigation, is available in the file for inspection by interested parties and on DG Trade’s website https://trade.ec.europa.eu/tdi/case_details.cfm?id=2449. The information submitted will only be taken into account if supported by factual evidence at the time of submission.

    5.6.    Interested parties

    In order to participate in the investigation interested parties, such as exporting producers, Union producers, importers and their representative associations, users and their representative associations, trade unions and representative consumer organisations first have to demonstrate that there is an objective link between their activities and the product under investigation.

    Exporting producers, Union producers, importers and representative associations who made information available in accordance to the procedures described in sections 5.3, 5.4 and 5.5 above will be considered as interested parties if there is an objective link between their activities and the product under investigation.

    Other parties will only be able to participate in the investigation as interested party from the moment they make themselves known, and provided that there is an objective link between their activities and the product under investigation. Being considered as an interested party is without prejudice to the application of Article 18 of the basic Regulation.

    Access to the file available for inspection for interested parties is made via Tron.tdi at the following address: https://tron.trade.ec.europa.eu/tron/TDI. Please follow the instructions on that page to get access.

    5.7.    Possibility to be heard by the Commission investigation services

    All interested parties may request to be heard by the Commission’s investigation services.

    Any request to be heard must be made in writing and must specify the reasons for the request as well as a summary of what the interested party wishes to discuss during the hearing. The hearing will be limited to the issues set out by the interested parties in writing beforehand.

    The timeframe for hearings is as follows:

    i.

    For any hearings to take place before the deadline for the imposition of provisional measures, a request should be made within 15 days from the date of publication of this Notice and the hearing will normally take place within 60 days of the date of publication of this Notice.

    ii.

    After the stage of provisional findings, a request should be made within 5 days from the date of the disclosure of the provisional findings or of the information document, and the hearing will normally take place within 15 days from the date of notification of the disclosure or the date of the information document.

    iii.

    At the stage of definitive findings, a request should be made within 3 days from the date of the final disclosure, and the hearing will normally take place within the period granted to comment on the final disclosure. If there is an additional final disclosure, a request should be made immediately upon receipt of this additional final disclosure, and the hearing will normally take place within the deadline to provide comments on this disclosure.

    The outlined timeframe is without prejudice to the right of the Commission services to accept hearings outside the timeframe in duly justified cases and to the right of the Commission to deny hearings in duly justified cases. Where the Commission services refuse a hearing request, the party concerned will be informed of the reasons for such refusal.

    In principle, hearings will not be used to present factual information which is not yet on file. Nevertheless, in the interest of good administration and to enable Commission services to progress with the investigation, interested parties may be directed to provide new factual information after a hearing.

    5.8.    Instructions for making written submissions and sending completed questionnaires and correspondence

    Information submitted to the Commission for the purpose of trade defence investigations shall be free from copyrights. Interested parties, before submitting to the Commission information and/or data which is subject to third party copyrights, must request specific permission to the copyright holder explicitly allowing the Commission a) to use the information and data for the purpose of this trade defence proceeding and b) to provide the information and/or data to interested parties to this investigation in a form that allows them to exercise their rights of defence.

    All written submissions, including the information requested in this Notice, completed questionnaires and correspondence provided by interested parties for which confidential treatment is requested shall be labelled ‘Sensitive’ (10). Parties submitting information in the course of this investigation are invited to reason their request for confidential treatment.

    Parties providing ‘Sensitive’ information are required to furnish non-confidential summaries of it pursuant to Article 19(2) of the basic Regulation, which will be labelled ‘For inspection by interested parties’. Those summaries should be sufficiently detailed to permit a reasonable understanding of the substance of the information submitted in confidence.

    If a party providing confidential information fails to show good cause for a confidential treatment request or does not furnish a non-confidential summary of it in the requested format and quality, the Commission may disregard such information unless it can be satisfactorily demonstrated from appropriate sources that the information is correct.

    Interested parties are invited to make all submissions and requests via TRON.tdi (https://tron.trade.ec.europa.eu/tron/TDI) including scanned powers of attorney and certification sheets. By using TRON.tdi or email, interested parties express their agreement with the rules applicable to electronic submissions contained in the document ‘CORRESPONDENCE WITH THE EUROPEAN COMMISSION IN TRADE DEFENCE CASES’ published on the website of the Directorate-General for Trade: http://trade.ec.europa.eu/doclib/docs/2011/june/tradoc_148003.pdf. The interested parties must indicate their name, address, telephone and a valid email address and they should ensure that the provided email address is a functioning official business email which is checked on a daily basis. Once contact details are provided, the Commission will communicate with interested parties by TRON.tdi or email only, unless they explicitly request to receive all documents from the Commission by another means of communication or unless the nature of the document to be sent requires the use of a registered mail. For further rules and information concerning correspondence with the Commission including principles that apply to submissions via TRON.tdi and by email, interested parties should consult the communication instructions with interested parties referred to above.

    Commission address for correspondence:

    European Commission

    Directorate-General for Trade

    Directorate H

    Office: CHAR 04/039

    1049 Bruxelles/Brussel

    BELGIQUE/BELGIË

    Email:

    For dumping issues:

    TRADE-AD664-ALUMINIUM-EXTRUSIONS-DUMPING@ec.europa.eu

    For injury issues:

    TRADE-AD664-ALUMINIUM-EXTRUSIONS-INJURY@ec.europa.eu

    6.   Schedule of the investigation

    The investigation will be concluded, pursuant to Article 6(9) of the basic Regulation within normally 13, but not more than 14 months of the date of the publication of this Notice. In accordance with Article 7(1) of the basic Regulation, provisional measures may be imposed normally not later than 7 months, but in any event not later than 8 months from the publication of this Notice.

    In accordance with Article 19a of the basic Regulation, the Commission will provide information on the planned imposition of provisional duties 3 weeks before the imposition of provisional measures. Interested parties will be given 3 working days to comment in writing on the accuracy of the calculations.

    In cases where the Commission intends not to impose provisional duties but to continue the investigation, interested parties will be informed, by means of an information document, of the non-imposition of duties 3 weeks before the expiry of the deadline under Article 7(1) of the basic Regulation.

    Interested parties will be given 15 days to comment in writing on the provisional findings or on the information document, and 10 days to comment in writing on the definitive findings, unless otherwise specified. Where applicable, additional final disclosures will specify the deadline for interested parties to comment in writing.

    7.   Submission of information

    As a rule, interested parties may only submit information in the timeframes specified in sections 5 and 6 of this Notice. The submission of any other information not covered by those sections, should respect the following timetable:

    i.

    Any information for the stage of provisional findings should be submitted within 70 days from the date of publication of this Notice, unless otherwise specified.

    ii.

    Unless otherwise specified, interested parties should not submit new factual information after the deadline to comment on the disclosure of the provisional findings or the information document at the stage of provisional findings. After this deadline, interested parties may only submit new factual information if they can demonstrate that such new factual information is necessary to rebut factual allegations made by other interested parties and provided that such new factual information can be verified within the time available to complete the investigation in a timely manner.

    iii.

    In order to complete the investigation within the mandatory deadlines, the Commission will not accept submissions from interested parties after the deadline to provide comments on the final disclosure or, if applicable, after the deadline to provide comments on the additional final disclosure.

    8.   Possibility to comment on other parties’ submissions

    In order to guarantee the rights of defence, interested parties should have the possibility to comment on information submitted by other interested parties. When doing so, interested parties may only address issues raised in the other interested parties’ submissions and may not raise new issues.

    Such comments should be made according to the following timeframe:

    i.

    Any comment on information submitted by other interested parties before the deadline of imposition of provisional measures should be made at the latest on day 75 from the date of publication of this Notice, unless otherwise specified.

    ii.

    Comments on the information provided by other interested parties in reaction to the disclosure of the provisional findings or of the information document should be submitted within 7 days from the deadline to comment on the provisional findings or on the information document, unless otherwise specified.

    iii.

    Comments on the information provided by other interested parties in reaction to the final disclosure should be submitted within 3 days from the deadline to comment on the final disclosure, unless otherwise specified. If there is an additional final disclosure, comments on the information provided by other interested parties in reaction to this disclosure should be made within 1 day from the deadline to comment on this disclosure, unless otherwise specified.

    The outlined timeframe is without prejudice to the Commission’s right to request additional information from interested parties in duly justified cases.

    9.   Extension to time limits specified in this Notice

    Extensions to time-limits provided for in this Notice may be granted upon request of interested parties showing due cause.

    Any extension to the time-limits provided for in this Notice should only be requested in exceptional circumstances and will only be granted if duly justified. In any event, any extension to the deadline to reply to questionnaires will be limited normally to 3 days, and as a rule will not exceed 7 days. Regarding time limits for the submission of other information specified in the Notice of Initiation, extensions will be limited to 3 days unless exceptional circumstances are demonstrated.

    10.   Non-cooperation

    In cases where any interested party refuses access to or does not provide the necessary information within the time limits, or significantly impedes the investigation, provisional or final findings, affirmative or negative, may be made on the basis of facts available, in accordance with Article 18 of the basic Regulation.

    Where it is found that any interested party has supplied false or misleading information, the information may be disregarded and use may be made of facts available.

    If an interested party does not cooperate or cooperates only partially and findings are therefore based on facts available in accordance with Article 18 of the basic Regulation, the result may be less favourable to that party than if it had cooperated.

    Failure to give a computerised response shall not be deemed to constitute non-cooperation, provided that the interested party shows that presenting the response as requested would result in an unreasonable extra burden or unreasonable additional cost. The interested party should immediately contact the Commission.

    11.   Hearing Officer

    Interested parties may request the intervention of the Hearing Officer for trade proceedings. The Hearing Officer reviews requests for access to the file, disputes regarding the confidentiality of documents, requests for extension of time limits and any other request concerning the rights of defence of interested parties and third parties as may arise during the proceeding.

    The Hearing Officer may organise hearings and mediate between the interested party/-ies and Commissions services to ensure that the interested parties’ rights of defence are being fully exercised. A request for a hearing with the Hearing Officer should be made in writing and should specify the reasons for the request. The Hearing Officer will examine the reasons for the requests. These hearings should only take place if the issues have not been settled with the Commission services in the due course.

    Any request must be submitted in good time and expeditiously so as not to jeopardise the orderly conduct of proceedings. To that effect, interested parties should request the intervention of the Hearing Officer at the earliest possible time following the occurrence of the event justifying such intervention. In principle, the timeframes set out in section 5.7 to request hearings with the Commission services apply mutatis mutandis to requests for hearings with the Hearing Officer. Where hearing requests are submitted outside the relevant timeframes, the Hearing Officer will also examine the reasons for such late requests, the nature of the issues raised and the impact of those issues on the rights of defence, having due regard to the interests of good administration and the timely completion of the investigation.

    For further information and contact details interested parties may consult the Hearing Officer’s web pages on DG Trade’s website: http://ec.europa.eu/trade/trade-policy-and-you/contacts/hearing-officer/.

    12.   Processing of personal data

    Any personal data collected in this investigation will be treated in accordance with Regulation (EU) 2018/1725 of the European Parliament and of the Council (11).

    A data protection notice that informs all individuals of the processing of personal data in the framework of Commission’s trade defence activities is available on DG TRADE’s website: http://ec.europa.eu/trade/policy/accessing-markets/trade-defence/


    (1)  OJ L 176, 30.6.2016, p. 21.

    (2)  The general term ‘injury’ refers to material injury as well as to threat of material injury or material retardation of the establishment of an industry as set out in Article 3(1) of the basic Regulation.

    (3)  References to the publication of this Notice mean publication of this Notice in the Official Journal of the European Union.

    (4)  http://trade.ec.europa.eu/doclib/docs/2017/december/tradoc_156474.pdf Documents cited in the Commission report may also be obtained upon a duly reasoned request.

    (5)  Regulation (EU) 2018/825 of the European Parliament and of the Council of 30 May 2018 amending Regulation (EU) 2016/1036 on protection against dumped imports from countries not members of the European Union and Regulation (EU) 2016/1037 on protection against subsidised imports from countries not members of the European Union, OJ L 143, 7.6.2018, p. 1.

    (6)  An exporting producer is any company in the country concerned which produces and exports the product under investigation to the Union market, either directly or via a third party, including any of its related companies involved in the production, domestic sales or exports of the product under investigation.

    (7)  Pursuant to Article 9(6) of the basic Regulation, any zero and de minimis margins, and margins established in accordance with the circumstances described in Article 18 of the basic Regulation will be disregarded.

    (8)  This section covers only importers not related to exporting producers. Importers that are not related to exporting producers have to fill in Annex I to the questionnaire for these exporting producers. In accordance with Article 127 of Commission Implementing Regulation (EU) 2015/2447 of 24 November 2015 laying down detailed rules for implementing certain provisions of Regulation (EU) No 952/2013 of the European Parliament and of the Council laying down the Union Customs Code, two persons shall be deemed to be related if: (a) they are officers or directors of the other person’s business; (b) they are legally recognised partners in business; (c) they are employer and employee; (d) a third party directly or indirectly owns, controls or holds 5 % or more of the outstanding voting stock or shares of both of them; (e) one of them directly or indirectly controls the other; (f) both of them are directly or indirectly controlled by a third person; (g) together they control a third person directly or indirectly; or (h) they are members of the same family (OJ L 343, 29.12.2015, p. 558). Persons shall be deemed to be members of the same family only if they stand in any of the following relationships to one another: (i) husband and wife, (ii) parent and child, (iii) brother and sister (whether by whole or half blood), (iv) grandparent and grandchild, (v) uncle or aunt and nephew or niece, (vi) parent-in-law and son-in-law or daughter-in-law, (vii) brother-in-law and sister-in-law. In accordance with Article 5(4) of Regulation (EU) No 952/2013 of the European Parliament and of the Council laying down the Union Customs Code, ‘person’ means a natural person, a legal person, and any association of persons which is not a legal person but which is recognised under Union or national law as having the capacity to perform legal acts (OJ L 269, 10.10.2013, p. 1).

    (9)  The data provided by unrelated importers may also be used in relation to aspects of this investigation other than the determination of dumping.

    (10)  A ‘Sensitive’ document is a document which is considered confidential pursuant to Article 19 of the basic Regulation and Article 6 of the WTO Agreement on Implementation of Article VI of the GATT 1994 (Anti-Dumping Agreement). It is also a document protected pursuant to Article 4 of Regulation (EC) No 1049/2001 of the European Parliament and of the Council (OJ L 145, 31.5.2001, p. 43).

    (11)  Regulation (EU) 2018/1725 of the European Parliament and of the Council of 23 October 2018 on the protection of natural persons with regard to the processing of personal data by the Union institutions, bodies, offices and agencies and on the free movement of such data, and repealing Regulation (EC) No 45/2001 and Decision No 1247/2002/EC (OJ L 295, 21.11.2018, p. 39).


    ANNEX I

    ‘Sensitive’ version

    Version ‘For inspection by interested parties’

    (tick the appropriate box)

    ANTI-DUMPING PROCEEDING CONCERNING IMPORTS OF ALUMINIUM EXTRUSIONS ORIGINATING IN THE PEOPLE’S REPUBLIC OF CHINA

    INFORMATION FOR THE SELECTION OF THE SAMPLE OF EXPORTING PRODUCERS IN THE PEOPLE’S REPUBLIC OF CHINA

    This form is designed to assist exporting producers in the People’s Republic of China in responding to the request for sampling information made in point 5.3.1.1 of the notice of initiation.

    Both the ‘Sensitive’ version and the version ‘For inspection by interested parties’ must be returned to the Commission as set out in the Notice of initiation.

    1.   IDENTITY AND CONTACT DETAILS

    Supply the following details about your company:

    Company name

     

    Address

     

    Contact person

     

    Email address

     

    Telephone

     

    Fax

     

    2.   TURNOVER AND SALES VOLUME

    Indicate the turnover in the accounting currency of the company during the investigation period 1 January 2019 to 31 December 2019 (export sales to the Union for each of the 28 Member States (1) separately and in total and domestic sales) of aluminium extrusions as defined in the notice of initiation and the corresponding weight. State the unit of weight and the currency used.

     

    Tonnes

    Value in accounting currency

    Specify the currency used

    Export sales to the Union, for each of the 28 Member States separately and in total, of the product under investigation, manufactured by your company

    Total:

     

     

    Name each Member State (2):

     

     

    Domestic sales of the product under investigation, manufactured by your company

     

     

    Indicate which of the following product categories your company produces and sells to the European Union. In addition, please provide indicative estimates of the proportion of total production each product category represents.

     

    Does your company produce? (Y/N)

    Proportion of total production (in %)

    Does your company sell to the European Union? (Y/N)

    Solid profiles

     

     

     

    Hollow profiles

     

     

     

    Bars and rods

     

     

     

    Tubes and pipes

     

     

     

    3.   ACTIVITIES OF YOUR COMPANY AND RELATED COMPANIES (3)

    Give details of the precise activities of the company and all related companies (please list them and state the relationship to your company) involved in the production and/or selling (export and /or domestic) of the product under investigation. Such activities could include but are not limited to purchasing the product under investigation or producing it under sub-contracting arrangements, or processing or trading the product under investigation.

    Company name and location

    Activities

    Relationship

     

     

     

     

     

     

     

     

     

    4.   OTHER INFORMATION

    Please provide any other relevant information which the company considers useful to assist the Commission in the selection of the sample.

    5.   INDIVIDUAL DUMPING MARGIN

    The company declares that, in the event that it is not selected to be in the sample, it would like to receive a questionnaire and other claim forms in order to fill these in and thus claim an individual dumping margin in accordance with section 5.3.1.1.(b) of the notice of initiation.

    ☐ Yes

    ☐ No

    6.   CERTIFICATION

    By providing the above information, the company agrees to its possible inclusion in the sample. If the company is selected to be part of the sample, this will involve completing a questionnaire and accepting a visit at its premises in order to verify its response. If the company indicates that it does not agree to its possible inclusion in the sample, it will be deemed not to have cooperated in the investigation. The Commission’s findings for non-cooperating exporting producers are based on facts available and the result may be less favourable to that company than if it had cooperated.

    Signature of authorised official:

    Name and title of authorised official:

    Date:


    (1)  In 2019, the 28 Member States of the European Union were: Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Poland, Portugal, Romania, Slovakia Slovenia, Spain, Sweden, and the United Kingdom.

    (2)  Add additional rows where necessary.

    (3)  In accordance with Article 127 of Commission Implementing Regulation (EU) 2015/2447 of 24 November 2015 laying down detailed rules for implementing certain provisions of Regulation (EU) No 952/2013 of the European Parliament and of the Council laying down the Union Customs Code, two persons shall be deemed to be related if: (a) they are officers or directors of the other person’s business; (b) they are legally recognised partners in business; (c) they are employer and employee; (d) a third party directly or indirectly owns, controls or holds 5 % or more of the outstanding voting stock or shares of both of them; (e) one of them directly or indirectly controls the other; (f) both of them are directly or indirectly controlled by a third person; (g) together they control a third person directly or indirectly; or (h) they are members of the same family (OJ L 343, 29.12.2015, p. 558). Persons shall be deemed to be members of the same family only if they stand in any of the following relationships to one another: (i) husband and wife, (ii) parent and child, (iii) brother and sister (whether by whole or half blood), (iv) grandparent and grandchild, (v) uncle or aunt and nephew or niece, (vi) parent-in-law and son-in-law or daughter-in-law, (vii) brother-in-law and sister-in-law. In accordance with Article 5(4) of Regulation (EU) No 952/2013 of the European Parliament and of the Council laying down the Union Customs Code, ‘person’ means a natural person, a legal person, and any association of persons which is not a legal person but which is recognised under Union or national law as having the capacity to perform legal acts (OJ L 269, 10.10.2013, p. 1).


    ANNEX II

    ‘Sensitive’ version

    Version ‘For inspection by interested parties’

    (tick the appropriate box)

    ANTI-DUMPING PROCEEDING CONCERNING IMPORTS OF ALUMINIUM EXTRUSIONS ORIGINATING IN THE PEOPLE’S REPUBLIC OF CHINA

    INFORMATION FOR THE SELECTION OF THE SAMPLE OF UNRELATED IMPORTERS

    This form is designed to assist unrelated importers in responding to the request for sampling information made in point 5.3.3 of the notice of initiation.

    Both the ‘Sensitive’ version and the version ‘For inspection by interested parties’ must be returned to the Commission as set out in the notice of initiation.

    1.   IDENTITY AND CONTACT DETAILS

    Supply the following details about your company:

    Company name

     

    Address

     

    Contact person

     

    Email address

     

    Telephone

     

    Fax

     

    2.   TURNOVER AND SALES VOLUME

    Indicate the total turnover in euros (EUR) of the company, and the turnover and weight for imports into the Union and resales on the Union market after importation from the People’s Republic of China, during the investigation period 1 January 2019 to 31 December 2019 of aluminium extrusions as defined in the notice of initiation and the corresponding weight. State the unit of weight used.

     

    Tonnes

    Value in euros (EUR)

    Total turnover of your company in euros (EUR)

     

     

    Imports of the product under investigation into the Union

     

     

    Resales on the Union market after importation from the People’s Republic of China of the product under investigation

     

     

    Indicate which of the following product categories your company imports into the Union from the People’s Republic of China:

     

    Imports in the Union (Y/N)

    Solid profiles

     

    Hollow profiles

     

    Bars and rods

     

    Tubes and pipes

     

    3.   ACTIVITIES OF YOUR COMPANY AND RELATED COMPANIES (1)

    Give details of the precise activities of the company and all related companies (please list them and state the relationship to your company) involved in the production and/or selling (export and/or domestic) of the product under investigation. Such activities could include but are not limited to purchasing the product under investigation or producing it under sub-contracting arrangements, or processing or trading the product under investigation.

    Company name and location

    Activities

    Relationship

     

     

     

     

     

     

     

     

     

    4.   OTHER INFORMATION

    Please provide any other relevant information which the company considers useful to assist the Commission in the selection of the sample.

    5.   CERTIFICATION

    By providing the above information, the company agrees to its possible inclusion in the sample. If the company is selected to be part of the sample, this will involve completing a questionnaire and accepting a visit at its premises in order to verify its response. If the company indicates that it does not agree to its possible inclusion in the sample, it will be deemed not to have cooperated in the investigation. The Commission’s findings for non-cooperating importers are based on the facts available and the result may be less favourable to that company than if it had cooperated.

    Signature of authorised official:

    Name and title of authorised official:

    Date:


    (1)  In accordance with Article 127 of Commission Implementing Regulation (EU) 2015/2447 of 24 November 2015 laying down detailed rules for implementing certain provisions of Regulation (EU) No 952/2013 of the European Parliament and of the Council laying down the Union Customs Code, two persons shall be deemed to be related if: (a) they are officers or directors of the other person's business; (b) they are legally recognised partners in business; (c) they are employer and employee; (d) a third party directly or indirectly owns, controls or holds 5 % or more of the outstanding voting stock or shares of both of them; (e) one of them directly or indirectly controls the other; (f) both of them are directly or indirectly controlled by a third person; (g) together they control a third person directly or indirectly; or (h) they are members of the same family (OJ L 343, 29.12.2015, p. 558). Persons shall be deemed to be members of the same family only if they stand in any of the following relationships to one another: (i) husband and wife, (ii) parent and child, (iii) brother and sister (whether by whole or half blood), (iv) grandparent and grandchild, (v) uncle or aunt and nephew or niece, (vi) parent-in-law and son-in-law or daughter-in-law, (vii) brother-in-law and sister-in-law. In accordance with Article 5(4) of Regulation (EU) No 952/2013 of the European Parliament and of the Council laying down the Union Customs Code, ‘person’ means a natural person, a legal person, and any association of persons which is not a legal person but which is recognised under Union or national law as having the capacity to perform legal acts (OJ L 269, 10.10.2013, p. 1).


    ANNEX III

    ‘Sensitive’ version

    Version ‘For inspection by interested parties’

    (tick the appropriate box)

    ANTI-DUMPING PROCEEDING CONCERNING IMPORTS OF ALUMINIUM EXTRUSIONS ORIGINATING IN THE PEOPLE’S REPUBLIC OF CHINA

    INFORMATION REQUEST REGARDING THE INPUTS USED BY THE PRODUCERS IN THE PEOPLE’S REPUBLIC OF CHINA

    This form is designed to assist producers in the People’s Republic of China in responding to the request for input information made in point 5.3.2 of the notice of initiation.

    Both the ‘Sensitive’ version and the version ‘For inspection by interested parties’ must be returned to the Commission as set out in the notice of initiation.

    The requested information must be sent back to the Commission at the address specified in the notice of initiation within 10 days from the date of this note to the file.

    1.   IDENTITY AND CONTACT DETAILS

    Supply the following details about your company:

    Company name

     

    Address

     

    Contact person

     

    Email address

     

    Telephone

     

    Fax

     

    2.   INFORMATION ON THE INPUTS USED BY YOUR COMPANY AND RELATED COMPANIES

    Please provide a short description of the production process of the product under investigation.

    Please list all materials (raw and processed) and energy used in the production of the product under investigation as well as all by-products and waste that are sold or (re)introduced in the production process of the product under investigation. Where appropriate, provide the corresponding Harmonised System (HS) classification code (1) for each of the items inserted in the two tables. Please fill in a separate Annex for each of the related companies that produce the product under investigation in case the production process differs. Related companies that are involved in the manufacturing of upstream inputs used in the production of the product under investigation shall also fill in a separate Annex and identify the supplied input(s).

    Raw Materials/energy

    HS Code

     

     

     

     

     

     

    (Add additional rows where necessary)

     


    By-products and waste

    HS Code

     

     

     

     

     

     

    (Add additional rows where necessary)

     

    The company hereby declares that the information provided above is accurate to the best of its knowledge.

    Signature of the authorised official:

    Name and title of the authorised official:

    Date:


    (1)  The Harmonized Commodity Description and Coding System generally referred to as ‘Harmonized System’ or simply ‘HS’ is a multipurpose international product nomenclature developed by the World Customs Organization (WCO).


    Top