EUR-Lex Access to European Union law
This document is an excerpt from the EUR-Lex website
Document 52000PC0564
Proposal for a Council Decision determining the Community position for a Decision of the Joint Committee on amending the sectoral annex on telecommunications terminal equipment to the Agreement on mutual recognition in relation to conformity assessment, certificates and markings between the European Community and Australia
Proposal for a Council Decision determining the Community position for a Decision of the Joint Committee on amending the sectoral annex on telecommunications terminal equipment to the Agreement on mutual recognition in relation to conformity assessment, certificates and markings between the European Community and Australia
Proposal for a Council Decision determining the Community position for a Decision of the Joint Committee on amending the sectoral annex on telecommunications terminal equipment to the Agreement on mutual recognition in relation to conformity assessment, certificates and markings between the European Community and Australia
/* COM/2000/0564 final */
Proposal for a Council Decision determining the Community position for a Decision of the Joint Committee on amending the sectoral annex on telecommunications terminal equipment to the Agreement on mutual recognition in relation to conformity assessment, certificates and markings between the European Community and Australia /* COM/2000/0564 final */
Proposal for a COUNCIL DECISION determining the Community position for a decision of the Joint Committee on amending the Sectoral Annex on Telecommunications Terminal Equipment to the Agreement on Mutual Recognition in relation to Conformity Assessment, Certificates and Markings between the European Community and Australia (presented by the Commission) EXPLANATORY MEMORANDUM I. Background 1. The Agreement on mutual recognition in relation to conformity assessment, certificates and markings between the European Community (EC) and Australia was approved by the Council with its Decision of 18 June 1998 [1] and entered into force on 1 January 1999. [1] Council Decision of 18 June 1998 on the conclusion of an Agreement on mutual recognition in relation to conformity assessment, certificates and markings between the European Community and Australia (OJ L 229, 17.8.1998, p. 1). 2. According to Article 12(8) of the Agreement, there is a general obligation on the Parties to bring within the scope of the Agreement new or additional conformity assessment procedures affecting a sector covered by a Sectoral Annex. The Community adopted on 9 March 1999 a new directive 99/5/EC on radio and telecommunication terminal equipment, which will replace the existing directive from 8 April 2000. The Sectoral Annex on Telecommunications Terminal Equipment (TTE Sectoral Annex) therefore needs to be amended to take into account the legislative situation in the Community. II. Amendments to the Sectoral Annex on Telecommunications Terminal Equipment (TTE) 3. Directive 99/5/EC on radio equipment and telecommunications terminal equipment [2] was adopted on 9 March 1999 and will repeal directive 98/13/EC [3] as of 8 April 2000. The existing TTE Sectoral Annex makes a reference to directive 98/13/EC and it must therefore be up-dated to take into account the new legal situation in the Community. More in detail, the necessary amendments need to reflect the following: [2] Directive 99/5/EC of the European Parliament and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity (OJ L 91, 7.4.1999, p. 10). [3] Directive 98/13/EC of the European Parliament and the Council of 12 February 1998 relating to telecommunications terminal equipment and satellite earth station equipment, including the mutual recognition thereof (OJ L 74, 12.3.1998, p. 1). - Changed scope between directive 98/13/EC and 99/5/EC. - Changed conformity assessment procedures between the directives. - Changed relation to directive 73/23/EEC on low voltage equipment and directive 89/336/EEC on electromagnetic compatibility. 4. With regard to the scope, the existing coverage of the TTE Sectoral Annex does not cover radio equipment; however the new Directive does. The Australians are not yet ready to include radio equipment, so the new Directive will be included but without radio equipment. III. Decision making procedures 5. For such amendments, Article 15(4) of the Agreement foresees that Sectoral Annexes may, through the Joint Committee, be amended in writing by the Parties. A decision of the Joint Committee, set up according to Article 12 of the Agreement, is therefore required. 6. For such a decision by the Joint Committee the Community position is, according to Article 3(3) of Council Decision 98/508/EC, determined by the Council, acting by qualified majority on a proposal from the Commission. Proposal for a COUNCIL DECISION determining the Community position for a decision of the Joint Committee on amending the Sectoral Annex on Telecommunications Terminal Equipment to the Agreement on Mutual Recognition in relation to Conformity Assessment, Certificates and Markings between the European Community and Australia THE COUNCIL OF THE EUROPEAN UNION, Having regard to the Treaty establishing the European Community, Having regard to the Council Decision of 18 June 1998 on the conclusion of an Agreement on mutual recognition in relation to conformity assessment, certificates and markings between the European Community and Australia [4] and in particular Article 3(3) of that Decision, [4] OJ L 229, 17.8.1998, p. 1 Having regard to the proposal from the Commission [5], [5] OJ L , , p. Whereas the Sectoral Annex on Telecommunications Terminal Equipment, needs to be amended to bring within its scope new Community legislation in the form of Directive 99/5/EC on radio and telecommunications terminal equipment, HAS DECIDED AS FOLLOWS: Article 1 The position to be adopted by the European Community for a decision by the Joint Committee, set up under Article 12 of the Agreement on mutual recognition in relation to conformity assessment, certificates and markings between the European Community and Australia, on amending the Sectoral Annex on Telecommunications Terminal Equipment shall be based on the amendments specified in the annex to this Decision. Minor modifications to the amendments specified in the annex may be accepted without further decision by the Council. Article 2 The Council authorises the Commission to sign on behalf of the Community the decision of the Joint Committee that adopts the amendments mentioned in Article 1. Article 3 The Decision of the Joint Committee shall be published in the Official Journal of the European Communities once it has been adopted. Done in Brussels, For the Council The President ANNEX I. Amendments to the Sectoral Annex on Telecommunications Terminal Equipment 1. In Scope and Coverage, in the column "Products for export to the European Community" the entire text is deleted and replaced with the following: "Any wired telecommunications terminal equipment, connected directly or indirectly to the public telecommunications network, falling under the scope of Directive 99/5/EC of the European Parliament and of the Council of 9 March 1999 and radio equipment (falling under the Directive) for which harmonised standards were adopted on 8/4/2000, and which are included in Section V." 2. In Section I, in the column "The legislative, regulatory and administrative requirements of the European Community with which Australian designated Conformity Assessment Bodies shall assess compliance", the entire text is deleted and replaced with the following: "Directive 99/5/EC of the European Parliament and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity." 3. In Section V, Article 1, 1st para is replaced with the following: In accordance with Part 21 of the Telecommunications Act 1997, a manufacturer or importer must notify the Australian Communications Authority (ACA) of their intention to apply a label to customer equipment prior to placing that customer equipment on the Australian market. In Section V, Article 1, 2nd para, the words "N° 2 of 1997" at the end of the para should be deleted. The following sentence should be added: "An indicative list is included in Section V". In Section V, Article 4, the entire text is deleted and replaced with the following: "Where a manufacturer chooses not to use the procedures of Directive 99/5/EC for assessing conformity to electrical safety and EMC requirements, the relevant provisions of the Sectoral Annexes on, respectively, Low Voltage Equipment and Electromagnetic Compatibility shall apply." 4. In Section V, the list of ACA Standards is deleted and replaced with the following: ACA Technical Standards TS 001 TS 002 TS 003 TS 004 TS 005 TS 006 TS 007 TS 008 TS 014 TS 015 TS 016 TS 018 TS 019 TS 022 TS 024 TS 025 TS 026 TS 028 TS 031 TS 034 TS 038 European Community's Technical Standards EN 301 419-1 (December 1999) EN 301 419-2 (April 1999) EN 301 419-3 (November 1999) EN 301 419-7 (November 1999) TBR 06 (January 1997) TBR 19 Ed. 3 (October 1996) TBR 23 (March 1998) TBR 26 (May 1998) TBR 27 (December 1997) TBR 28 (December 1997) TBR 30 (December 1997) TBR 31 Ed. 2 (March 1998) TBR 35 (September 1998) TBR 41 (February 1998) TBR 42 (February 1998) TBR 43 (May 1998) TBR 44 (May 1998)