(1)

A fertilising product, which meets the requirements laid down in Annexes I and II to Regulation (EU) 2019/1009 for the relevant product function category (‘PFC’) and component material category (‘CMC’) respectively, is labelled in accordance with Annex III to that Regulation and has successfully passed the conformity assessment procedure laid down in Annex IV to Regulation (EU) 2019/1009, can then be CE marked and can move freely in the internal market as an EU fertilising product.

(2)

While preparing for the transition to new harmonisation rules, both Member States and interested stakeholders informed the Commission about the need to adapt some of the technical provisions in the annexes to Regulation (EU) 2019/1009. Those adaptations are necessary to facilitate internal market access for fertilising products that are agronomically efficient, safe and already widely traded on the market. Some of those amendments facilitate the free movement of such products, i.e. safe and agronomically efficient fertilising products, by improving the consistency with other legal acts and policy objectives of the Union. Other amendments are necessary in order to avoid situations in which significant categories of fertilising products would inadvertently be excluded from the harmonisation rules.

(3)

Regulation (EU) 2019/1009, as amended by Commission Delegated Regulation (EU) 2021/1768 (2), allows manufacturers to use certain types of polymers in EU fertilising products if those are compliant with the conditions laid down for CMC 1 and CMC 11 in Annex II to Regulation (EU) 2019/1009. One of the conditions is that the polymer is registered in accordance with Regulation (EC) No 1907/2006 of the European Parliament and of the Council (3). In the Communication titled ‘Chemicals Strategy for Sustainability, towards a Toxic-Free Environment’ (4), the Commission announced the revision of Regulation (EC) No 1907/2006, extending a registration obligation to certain polymers. Consequently, for reasons of coherence and consistency, the registration obligation of polymers should, as a first step, be regulated under Regulation (EC) No 1907/2006, as the discussions for its revision offer a broader context and the possibility of taking a holistic approach, before becoming applicable under Regulation (EU) 2019/1009.

(4)

Regulation (EU) 2019/1009 lays down an obligation for the registration of magnesia in accordance with Regulation (EC) No 1907/2006. However, Regulation (EC) No 1907/2006 exempts magnesia, which is not chemically modified, from the registration obligation, as the registration is deemed inappropriate or unnecessary for that substance and its exemption from the registration obligation does not jeopardise the objectives of that Regulation. Magnesia has a long history of use in fertilisers and has no harmonised classification in accordance with Regulation (EC) No 1272/2008 of the European Parliament and of the Council (5). Taking that into account and in order to facilitate the access to the internal market of fertilisers containing magnesia as EU fertilising products, the registration obligation laid down in Regulation (EU) 2019/1009 should no longer apply to magnesia used in fertilisers.

(5)

Regulation (EU) 2019/1009 lays down requirements for inhibitors as EU fertilising products belonging to PFC 5 and for EU fertilising products containing inhibitors as a component material belonging to CMC 1. To avoid any confusions, the terminology used in that Regulation should be amended to reflect the distinction between the two situations. Thus, the term ‘inhibiting compound’ should be used whenever it concerns a substance or mixture which improves the nutrient release pattern of a nutrient by delaying or stopping the activity of specific groups of micro-organisms or enzyme. The term ‘inhibitor’ should be used only when it refers to EU fertilising products belonging to PFC 5. This distinction is important as inhibitors may be mixtures containing other substances, like stabilisers, in addition to inhibiting compounds. Correct use of those terms is necessary to facilitate the free movement of EU fertilising products, by clearly laying down the rules applicable in each situation.

(6)

Regulation (EU) 2019/1009 includes requirements ensuring that the inhibiting compounds are efficient, but does not lay down requirements on the efficiency of the fertiliser or the blend containing such an inhibiting compound. The use of efficient products containing such substances helps avoiding the environmental pollution caused by the leaching of nitrogen. Commission Communications titled ‘Pathway to a Healthy Planet for All EU Action Plan: “Towards Zero Pollution for Air, Water and Soil”’ (6) and ‘A Farm to Fork Strategy for a fair, healthy and environmentally-friendly food system’ (7) mention the environmental concerns and the ambitious targets to reduce nutrient losses by 50 % by 2030. It is therefore important to ensure that the EU fertilising products, which contain inhibiting compounds, are efficient. Therefore, Regulation (EU) 2019/1009 should be amended to include a requirement that inhibiting compounds are present in fertilisers (PFC 1) or in fertilising product blend (PFC 7) in a concentration, which is within the range of concentrations that ensures the efficiency of the inhibiting compound. Furthermore, additional labelling requirements should ensure that the manufacturers of inhibitors referred to in PFC 5 provide clear instructions on how to mix such products with a fertiliser to ensure their efficiency.

(7)

Regulation (EU) 2019/1009 lays down rules on the use of fresh crop digestate and on digestate other than fresh crop digestate, hereafter commonly referred to as ‘digestate’, as component materials in EU fertilising products. That Regulation lays down rules for the digestion processes. However, it does not provide for any other rules for post processing of the digestate.

(8)

The Joint Research Centre (JRC) report titled ‘End-of-waste criteria for biodegradable waste subjected to biological treatment (compost & digestate): Technical proposals’ (8) states that digestate is often used in agriculture, either as a whole or following separation in a solid and liquid fraction. That separation facilitates the storing of materials and their long-distance transport, which is especially important for a CE marked product. The mechanical separation of a digestate in the solid and liquid fractions is a commonly used method in some Member States and seems to be a well-established method according to a recent study titled ‘Digestate and compost as fertilisers: Risk assessment and risk management options’ (9). The separation of a digestate in the solid and liquid fractions could pose limited risks if conditions regarding the post digestion process and the additives to be used are laid down. Therefore, Regulation (EU) 2019/1009 should be amended to include this post digestion process, under the conditions that the additives used do not exceed a certain concentration and are registered in accordance with Regulation (EC) No 1907/2006. Allowing these processes in Regulation (EU) 2019/1009 is necessary in order to facilitate the access to the internal market for EU fertilising products containing digestate and to adapt the requirements laid down for these component material categories to technical progress. It will also create new opportunities for the recovery of bio-waste, which is in line with the overall ambitious plans for a circular economy.

(9)

Besides the mechanical separation of a digestate in the solid and liquid fractions, other processes are commonly used to remove water from a digestate or its fractions. Regulation (EU) 2019/1009 should allow manufacturers to further process the digestate or its fractions in order to extract water, without the intention to otherwise chemically modify the component materials. Furthermore, nitrogen or phosphorus may be recovered out of a digestate via stripping or precipitation. To close the loop, it is important not only to create the possibility for the recovery of these nutrients out of digestate, but also to allow for the use of the remaining digestate in EU fertilising products, given that it contains various other nutrients and organic matter. In addition, requirements for the use of additives needed for such processes should be laid down.

(10)

Regulation (EU) 2019/1009 applies without prejudice to Regulation (EU) 2019/1021 of the European Parliament and of the Council (10), which lays down general rules applicable to persistent organic pollutants. Regulation (EU) 2019/1009 lays down a limit value of 0,8 mg/kg dry matter of ndl-PCB for pyrolysis and gasification materials belonging to CMC 14. However, in accordance with Regulation (EU) 2019/2021, PCB are not to be present in substances or mixtures placed on the EU market. To ensure coherence with Regulation (EU) 2019/1021 and clarity as to the fact that no ndl-PCB is to be contained in EU fertilising products with pyrolysis or gasification materials, that limit value in Regulation (EU) 2019/1009 should be deleted.

(11)

Regulation (EU) 2019/1009 should therefore be amended accordingly,

(1)

Annex I is amended in accordance with Annex I to this Regulation;

(2)

Annex II is amended in accordance with Annex II to this Regulation;

(3)

Annex III is amended in accordance with Annex III to this Regulation;

(4)

Annex IV is amended in accordance with Annex IV to this Regulation.