This document is an excerpt from the EUR-Lex website
Document 21999A1231(02)
Agreement in the form of an exchange of letters between the Europaam Community and the Government of the Republic of Kazakhstan establishing a double-checking system without quantitative limits in respect of the export of certain steel products covered by the EC and ECSC Treaties from the Republic of Kazakhstan to the European Community
Agreement in the form of an exchange of letters between the Europaam Community and the Government of the Republic of Kazakhstan establishing a double-checking system without quantitative limits in respect of the export of certain steel products covered by the EC and ECSC Treaties from the Republic of Kazakhstan to the European Community
Agreement in the form of an exchange of letters between the Europaam Community and the Government of the Republic of Kazakhstan establishing a double-checking system without quantitative limits in respect of the export of certain steel products covered by the EC and ECSC Treaties from the Republic of Kazakhstan to the European Community
OJ L 342, 31.12.1999, p. 38–53
(ES, DA, DE, EL, EN, FR, IT, NL, PT, FI, SV)
No longer in force, Date of end of validity: 31/12/2001
Agreement in the form of an exchange of letters between the Europaam Community and the Government of the Republic of Kazakhstan establishing a double-checking system without quantitative limits in respect of the export of certain steel products covered by the EC and ECSC Treaties from the Republic of Kazakhstan to the European Community
Official Journal L 342 , 31/12/1999 P. 0038 - 0053
AGREEMENT IN THE FORM OF AN EXCHANGE OF LETTERS Between the Europaam Community and the Government of the Republic of Kazakhstan establishing a double-checking system without quantitative limits in respect of the export of certain steel products covered by the EC and ECSC Treaties from the Republic of Kazakhstan to the European Community A. Letter from the Council of the European Union Sir, 1. I have the honour to refer to the recently concluded negotiations between the European Coal and Steel Community and the Government of the Republic of Kazakhstan concerning a new ECSC steel agreement, in the course of which consultations took place with regard to problems concerning certain steel products covered by the EC and ECSC Treaties which fall outside the scope of the ECSC steel Agreement. 2. Following these consultations the Parties hereby agree to establish a double-checking system, without quantitative limits, in respect of certain steel products in order to improve transparency and to avoid possible diversions of trade. The details of the double-checking system are annexed to this letter. 3. The present Exchange of Letters is without prejudice to the application of the relevant provisions of the bilateral agreements on trade and trade-related matters, in particular those relating to anti-dumping and safeguard measures. 4. Either Party may at any time propose modifications to the Annex or its appendices which shall require the mutual consent of the Parties and shall take effect as agreed by them. In the event that anti-dumping or safeguard investigations are initiated or measures introduced in the European Community concerning a product under the double-checking system, the Republic of Kazakhstan will decide whether to exclude the product in question from the double-checking system. Such a decision shall not affect the entry into free circulation of the product in question into the Community. 5. In conclusion, I have the honour to propose that if this letter, its annex and appendices are acceptable to your Government, this letter and your confirmation shall together constitute an agreement between the European Community and the Republic of Kazakhstan, which shall enter into force on the date of your reply. Please accept, Sir, the assurance of my highest consideration, On behalf of the Council of the European Union >PIC FILE= "L_1999342EN.003802.TIF"> ANNEX to the Agreement in the form of an Exchange of Letters between the European Community and the Government of the Republic of Kazakhstan establishing a double-checking system without quantitative limits in respect of the export of certain steel products covered by the EC and ECSC Treaties from the Republic of Kazakhstan to the European Community 1.1. For the period running from the date on which this Agreement is applied between the Parties to 31 December 2001, unless both Parties agree to terminate the system earlier, imports into the Community of the products listed in Appendix I originating in Kazakhstan shall be subject to the presentation of a surveillance document conforming to the model shown at Appendix II issued by the authorities in the Community. 1.2. For the period running from the date on which this Agreement is applied to 31 December 2001, unless both Parties agree to terminate the system earlier, imports into the Community of the products listed in Appendix I and which originate in Kazakhstan shall, in addition, be subject to the issue of an export document by the competent Kazakh authorities. Presentation by the importer of the original of the export document must be effected not later than 31 March of the year following that in which the goods covered by the document were shipped. 1.3. An export document will not be required for goods already shipped to the Community before the date of application of this Agreement, provided that the destination of such products is not changed from a non-Community destination and that those products which, under the currently applicable prior surveillance regime, could be imported only on presentation of a surveillance document are in fact accompanied by such a document. 1.4. Shipment is considered to have taken place on the date of loading into the exporting means of transport. 1.5. The export document shall conform to the model shown in Appendix III. It shall be valid for exports throughout the customs territory of the Community. 1.6. Kazakhstan shall notify the Commission of the European Communities of the names and addresses of the appropriate Kazakh governmental authorities which are authorised to issue and to verify export documents together with specimens of the stamps and signatures they use. Kazakhstan shall also notify the Commission of any change in these particulars. 1.7. The classification of the products covered by this Agreement is based on the tariff and statistical nomenclature of the Community (hereinafter called the "Combined Nomenclature", or in abbreviated form "CN"). The origin of the products covered by this Agreement shall be determined in accordance with the rules in force in the Community. 1.8. The competent authorities of the Community undertake to inform Kazakhstan of any changes in the Combined Nomenclature (CN) in respect of products covered by this Agreement before their date of entry into force in the Community. 1.9. Certain technical provisions on the implementation of the double-checking system are set out in Appendix IV. 2.1. Kazakhstan undertakes to supply the Community with precise statistical information on the export documents issued by the Kazakh authorities pursuant to 1.2. Such information shall be transmitted to the Community by the end of the month following the month to which the statistics relate. 2.2. The Community undertakes to supply the Kazakh authorities with precise statistical information on surveillance documents issued by Member States in respect of the export documents issued by the Kazakh authorities pursuant to 1.1. Such information shall be transmitted to the Kazakh authorities by the end of the month following the month to which the statistics relate. 3. If necessary, at the request of either of the Parties, consultations shall be held on any problems arising from the operation of the Agreement. Such consultations shall be held promptly. Any consultations held under this paragraph shall be approached by both Parties in a spirit of cooperation and with a desire to reconcile the difference between them. 4. Any notices to be given hereunder shall be given: - in respect of the Community, to the Commission of the European Communities, - in respect of Kazakhstan, to the Mission of the Republic of Kazakhstan to the European Communities. APPENDIX I List of products subject to double-checking without quantitative limits KAZAKHSTAN Cold-rolled narrow strip of a width not exceeding 500 mm 7211 23 99 7211 29 50 7211 29 90 7211 90 90 Grain non-oriented electrical sheet 7211 23 91 7225 19 10 7225 19 90 7226 19 10 7226 19 30 7226 19 90 Grain-oriented electrical sheet 7226 11 90 APPENDIX II >PIC FILE= "L_1999342EN.004102.TIF"> >PIC FILE= "L_1999342EN.004201.TIF"> >PIC FILE= "L_1999342EN.004301.TIF"> >PIC FILE= "L_1999342EN.004401.TIF"> APPENDIX III >PIC FILE= "L_1999342EN.004702.TIF"> >PIC FILE= "L_1999342EN.004801.TIF"> APPENDIX IV KAZAKHSTAN TECHNICAL ANNEX ON THE DOUBLE-CHECKING SYSTEM 1. The export documents shall measure 210 × 297 mm. The paper used shall be white writing paper, sized, not containing mechanical pulp, and weighing not less than 25 g/m2. They shall be made out in English. If they are completed by hand, entries must be in ink and in printed script. These documents may comprise additional copies duly indicated as such. If the documents have several copies only the top copy is the original. This copy shall be clearly marked as "original" and other copies as "copies". Only the original shall be accepted by the competent authorities of the Community as being valid for the control of export to the Community in accordance with the provisions of the double-checking system. 2. Each document shall bear a standardised serial number, whether or not printed, by which it can be identified. This number shall be composed of the following elements: - two letters identifying the exporting country as follows: KZ= Kazakhstan, - two letters identifying the intended Member State of customs clearance as follows: BE= Belgium DK= Denmark DE= Germany EL= Greece ES= Spain FR= France IE= Ireland IT= Italy LU= Luxembourg NL= Netherlands AT= Austria PT= Portugal FI= Finland SE= Sweden GB= United Kingdom, - a one-digit number identifying the year, corresponding to the last figure in the respective year, e.g. "0" for 2000, - a two-digit number from 01 to 99, identifying the particular issuing office concerned in the exporting country, - a five-digit number running consecutively from 00001 to 99999 allocated to the intended Member State of customs clearance. 3. The export documents shall be valid for the calendar year during which they are issued, as shown in Box No 3 of the export document. 4. Since the importer needs to present the original export document when requesting an import document, export documents should, as far as possible, be issued in respect of individual commercial transactions, not global contracts. 5. Kazakhstan need not show price information on the export document, but that information is available to the Commission authorities on request. 6. Export documents may be issued after the shipment of the products to which they relate. In such cases they must bear the endorsement "issued retrospectively". 7. In the event of a theft, loss or destruction of an export document, the exporter may apply to the competent governmental authority which issued the document for a duplicate to be made out on the basis of the export documents in his possession. The duplicate of any such document so issued shall bear the endorsement "duplicate". The duplicate shall bear the date of the original export document. 8. The competent authorities of the Community shall be informed immediately of the withdrawal or modification of any export documents already issued and, where relevant, of the basis for such action. B. Letter from the Government of the Republic of Kazakhstan Sir, I have the honour to acknowledge receipt of your letter of today's date which reads as follows: "1. I have the honour to refer to the recently concluded negotiations between the European Coal and Steel Community and the Government of the Republic of Kazakhstan concerning a new ECSC steel agreement, in the course of which consultations took place with regard to problems concerning certain steel products covered by the EC and ECSC Treaties which fall outside the scope of the ECSC steel Agreement. 2. Following these consultations the Parties hereby agree to establish a double-checking system, without quantitative limits, in respect of certain steel products in order to improve transparency and to avoid possible diversions of trade. The details of the double-checking system are annexed to this letter. 3. The present Exchange of Letters is without prejudice to the application of the relevant provisions of the bilateral agreements on trade and trade-related matters, in particular those relating to anti-dumping and safeguard measures. 4. Either Party may at any time propose modifications to the Annex or its appendices which shall require the mutual consent of the Parties and shall take effect as agreed by them. In the event that anti-dumping or safeguard investigations are initiated or measures introduced in the European Community concerning a product under the double-checking system, the Republic of Kazakhstan will decide whether to exclude the product in question from the double-checking system. Such a decision shall not affect the entry into free circulation of the product in question into the Community. 5. In conclusion, I have the honour to propose that if this letter, its annex and appendices are acceptable to your Government, this letter and your confirmation shall together constitute an agreement between the European Community and the Republic of Kazakhstan, which shall enter into force on the date of your reply." I have the honour to confirm that the above is acceptable to my Government and that your letter, this reply and the attached annex and appendices together constitute an agreement, in accordance with your proposal. Please accept, Sir, the assurance of my highest consideration. For the Government of the Republic of Kazakhstan. >PIC FILE= "L_1999342EN.005301.TIF">