This document is an excerpt from the EUR-Lex website
Document 02021R2283-20240701
Council Regulation (EU) 2021/2283 of 20 December 2021 opening and providing for the management of autonomous tariff quotas of the Union for certain agricultural and industrial products, and repealing Regulation (EU) No 1388/2013
Consolidated text: Council Regulation (EU) 2021/2283 of 20 December 2021 opening and providing for the management of autonomous tariff quotas of the Union for certain agricultural and industrial products, and repealing Regulation (EU) No 1388/2013
Council Regulation (EU) 2021/2283 of 20 December 2021 opening and providing for the management of autonomous tariff quotas of the Union for certain agricultural and industrial products, and repealing Regulation (EU) No 1388/2013
02021R2283 — EN — 01.07.2024 — 005.001
This text is meant purely as a documentation tool and has no legal effect. The Union's institutions do not assume any liability for its contents. The authentic versions of the relevant acts, including their preambles, are those published in the Official Journal of the European Union and available in EUR-Lex. Those official texts are directly accessible through the links embedded in this document
|
COUNCIL REGULATION (EU) 2021/2283 of 20 December 2021 (OJ L 458 22.12.2021, p. 33) |
Amended by:
|
|
|
Official Journal |
||
|
No |
page |
date |
||
|
L 167 |
10 |
24.6.2022 |
||
|
L 330 |
109 |
23.12.2022 |
||
|
L 158 |
15 |
21.6.2023 |
||
|
L 2880 |
1 |
29.12.2023 |
||
|
L 1829 |
1 |
28.6.2024 |
||
COUNCIL REGULATION (EU) 2021/2283
of 20 December 2021
opening and providing for the management of autonomous tariff quotas of the Union for certain agricultural and industrial products, and repealing Regulation (EU) No 1388/2013
Article 1
Article 2
The quotas referred to in Article 1 of this Regulation shall be managed by the Commission in accordance with Articles 49 to 54 of Implementing Regulation (EU) 2015/2447.
Article 3
Where a customs declaration for release for free circulation is lodged for products for which supplementary units have been provided in the Annex, the exact quantity of the products imported shall be entered in that declaration using the supplementary unit set out in the Annex.
Article 4
Regulation (EU) No 1388/2013 is repealed.
Article 5
This Regulation shall enter into force on the day following that of its publication in the Official Journal of the European Union.
It shall apply from 1 January 2022.
This Regulation shall be binding in its entirety and directly applicable in all Member States.
ANNEX
|
Order number |
CN code |
TARIC |
Description |
Quota period |
Quota volume |
Quota duty rate |
|
09.2849 |
ex 0710 80 69 |
10 |
Mushrooms of the species Auricularia polytricha (uncooked or cooked by steaming or boiling), frozen, for the manufacture of prepared meals () () |
1.1.-31.12. |
700 tonnes |
0 % |
|
09.2664 |
ex 2008 60 39 |
30 |
Sweet cherries containing added spirit, with a sugar content of not more than 9 % by weight, of a diameter of not more than 19,9 mm, with stones, for use in chocolate products () |
1.1.-31.12. |
1 000 tonnes |
10 % |
|
09.2925 |
ex 2309 90 31 ex 2309 90 31 ex 2309 90 96 ex 2309 90 96 |
41 49 41 49 |
Feed additive, consisting on dry weight basis of: — 68 % or more, but not more than 80 % of L-lysine sulphate, and — not more than 32 % of other components such as carbohydrates and other amino acids |
1.1.-31.12. |
100 000 tonnes |
0 % |
|
09.2913 |
ex 2401 10 35 ex 2401 10 70 ex 2401 10 95 ex 2401 10 95 ex 2401 10 95 ex 2401 20 35 ex 2401 20 70 ex 2401 20 95 ex 2401 20 95 ex 2401 20 95 |
91 10 11 21 91 91 10 11 21 91 |
Natural unmanufactured tobacco, whether or not cut in regular size, having a custom value of not less than EUR 450 per 100 kg net weight, for use as binder or wrapper for the manufacture of goods falling within subheading 2402 10 00 () |
1.1.-31.12. |
3 000 tonnes |
0 % |
|
09.2828 |
2712 20 90 |
|
Paraffin wax containing by weight less than 0,75 % of oil |
1.1.-31.12. |
180 000 tonnes |
0 % |
|
09.2600 |
ex 2712 90 39 |
10 |
Slack wax (CAS RN 64742-61-6) |
1.1.-31.12. |
100 000 tonnes |
0 % |
|
09.2578 |
ex 2811 19 80 |
50 |
Sulphamidic acid (CAS RN 5329-14-6) with a purity by weight of 95 % or more, whether or not with not more than 5 % addition of the anti-caking agent silicon dioxide (CAS RN 112926-00-8) |
1.1.-31.12. |
27 000 tonnes |
0 % |
|
09.2928 |
ex 2811 22 00 |
40 |
Silica filler in the form of granules, with a purity by weight of 97 % or more of silicon dioxide |
1.1.-31.12. |
1 700 tonnes |
0 % |
|
09.2806 |
ex 2825 90 40 |
30 |
Tungsten trioxide, including blue tungsten oxide (CAS RN 1314-35-8 or CAS RN 39318-18-8) |
1.1.-31.12. |
12 000 tonnes |
0 % |
|
09.2819 |
ex 2833 25 00 |
30 |
Copper hydroxide sulfate (Cu4(OH)6(SO4)), hydrate (CAS RN 12527-76-3) with a purity by weight of 98 % or more |
1.1.-31.12. |
240 000 kilograms |
0 % |
|
09.2872 |
ex 2833 29 80 |
40 |
Caesium sulphate (CAS RN 10294-54-9) in solid form or as aqueous solution containing by weight 48 % or more but not more than 52 % of caesium sulphate |
1.1.-31.12. |
400 tonnes |
0 % |
|
09.2567 |
ex 2903 22 00 |
10 |
Trichloroethylene (CAS RN 79-01-6) with a purity by weight of 99 % or more |
1.1.-31.12. |
11 885 000 kilograms |
0 % |
|
09.2837 |
ex 2903 79 30 |
20 |
Bromochloromethane (CAS RN 74-97-5) |
1.1.-31.12. |
600 tonnes |
0 % |
|
09.2933 |
ex 2903 99 80 |
30 |
1,3-Dichlorobenzene (CAS RN 541-73-1) |
1.1.-31.12. |
2 600 tonnes |
0 % |
|
09.2700 |
ex 2905 12 00 |
10 |
Propan-1-ol (propyl alcohol) (CAS RN 71-23-8) |
1.1.-31.12. |
15 000 tonnes |
0 % |
|
09.2551 |
ex 2905 29 90 |
40 |
Prop-2-yn-1-ol (CAS RN 107-19-7) with a purity by weight of 99 % or more |
1.7.-31.12. |
75 tonnes |
0 % |
|
09.2830 |
ex 2906 19 00 |
40 |
Cyclopropylmethanol (CAS RN 2516-33-8) |
1.1.-31.12. |
20 tonnes |
0 % |
|
09.2851 |
ex 2907 12 00 |
10 |
O-cresol (CAS RN 95-48-7) having a purity of not less than 98,5 % by weight |
1.1.-31.12. |
20 000 tonnes |
0 % |
|
09.2704 |
ex 2909 49 80 |
20 |
2,2,2',2'-Tetrakis(hydroxymethyl)-3,3'-oxydipropan-1-ol (CAS RN 126-58-9) |
1.1.-31.12. |
500 tonnes |
0 % |
|
09.2565 |
ex 2914 19 90 |
70 |
Calcium acetylacetonate (CAS RN 19372-44-2) with a purity by weight of 95 % or more |
1.1.-31.12. |
400 tonnes |
0 % |
|
09.2852 |
ex 2914 29 00 |
60 |
Cyclopropyl methyl ketone (CAS RN 765-43-5) |
1.1.-31.12. |
300 tonnes |
0 % |
|
09.2638 |
ex 2915 21 00 |
10 |
Acetic acid (CAS RN 64-19-7) of a purity by weight of 99 % or more |
1.1.-31.12. |
1 000 000 tonnes |
0 % |
|
09.2679 |
2915 32 00 |
|
Vinyl acetate (CAS RN 108-05-4) |
1.1.-31.12. |
450 000 tonnes |
0 % |
|
09.2728 |
ex 2915 90 70 |
85 |
Ethyl trifluoroacetate (CAS RN 383-63-1) |
1.1.-31.12. |
400 tonnes |
0 % |
|
09.2665 |
ex 2916 19 95 |
30 |
Potassium (E,E)-hexa-2,4-dienoate (CAS RN 24634-61-5) |
1.1.-31.12. |
8 250 tonnes |
0 % |
|
09.2684 |
ex 2916 39 90 |
28 |
2,5-Dimethylphenylacetyl chloride (CAS RN 55312-97-5) |
1.1.-31.12. |
700 tonnes |
0 % |
|
09.2599 |
ex 2917 11 00 |
40 |
Diethyl oxalate (CAS RN 95-92-1) |
1.1.-31.12. |
500 tonnes |
0 % |
|
09.2769 |
ex 2917 13 90 |
10 |
Dimethyl sebacate (CAS RN 106-79-6) |
1.1.-31.12. |
1 000 tonnes |
0 % |
|
09.2634 |
ex 2917 19 80 |
40 |
Dodecanedioic acid (CAS RN 693-23-2), of a purity by weight of more than 98,5 % |
1.1.-31.12. |
8 000 tonnes |
0 % |
|
09.2808 |
ex 2918 22 00 |
10 |
O-acetylsalicylic acid (CAS RN 50-78-2) |
1.1.-31.12. |
120 tonnes |
0 % |
|
09.2646 |
ex 2918 29 00 |
75 |
Octadecyl 3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate (CAS RN 2082-79-3) with: — a sieve passing fraction at a mesh width of 500 μm of more than 99 % by weight, and — a melting point of 49 oC or more, but not more than 54 oC, for use in the manufacture of PVC processing stabilizer-one packs based on powder mixtures (powders or press granulates) () |
1.1.-31.12. |
380 tonnes |
0 % |
|
09.2647 |
ex 2918 29 00 |
80 |
Pentaerythritol tetrakis(3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate) (CAS RN 6683-19-8) with: — a sieve passing fraction at a mesh width of 250 μm of more than 75 % by weight and at a mesh width of 500 μm of more than 99 % by weight, and — a melting point of 110 oC or more, but not more than 125 oC, for use in the manufacture of PVC processing stabilizer-one packs based on powder mixtures (powders or press granulates) () |
1.1.-31.12. |
140 tonnes |
0 % |
|
09.2975 |
ex 2918 30 00 |
10 |
Benzophenone-3,3',4,4'-tetracarboxylic dianhydride (CAS RN 2421-28-5) |
1.1.-31.12. |
1 000 tonnes |
0 % |
|
09.2598 |
ex 2921 19 99 |
75 |
Octadecylamine (CAS RN 124-30-1) |
1.1.-31.12. |
400 tonnes |
0 % |
|
09.2649 |
ex 2921 29 00 |
60 |
Bis(2-dimethylaminoethyl)(methyl)amine (CAS RN 3030-47-5) |
1.1.-31.12. |
1 700 tonnes |
0 % |
|
09.2682 |
ex 2921 41 00 |
10 |
Aniline (CAS RN 62-53-3) with a purity by weight of 99 % or more |
1.1.-31.12. |
150 000 tonnes |
0 % |
|
09.2617 |
ex 2921 42 00 |
89 |
4-Fluoro-N-(1-methylethyl)benzeneamine (CAS RN 70441-63-3) |
1.1.-31.12. |
500 tonnes |
0 % |
|
09.2602 |
ex 2921 51 19 |
10 |
O-phenylenediamine (CAS RN 95-54-5) |
1.1.-31.12. |
1 800 tonnes |
0 % |
|
09.2921 |
ex 2922 19 00 |
22 |
2-(dimethylamino)ethyl acrylate (CAS RN 2439-35-2) with a purity by weight of 99 % or more |
1.1.-31.12. |
14 000 tonnes |
0 % |
|
09.2545 |
ex 2922 29 00 |
63 |
Aclonifen (ISO) (CAS RN 74070-46-5) with a purity by weight of 97 % or more |
1.7.-31.12. |
2 000 tonnes |
0 % |
|
09.2563 |
ex 2922 41 00 |
20 |
L-Lysine hydrochloride (CAS RN 657-27-2) or an aqueous solution of L-lysine (CAS RN 56-87-1), containing by weight 50 % or more of L-lysine |
1.1.-31.12. |
300 000 tonnes |
0 % |
|
09.2575 |
ex 2923 90 00 |
87 |
3-Chloro-2-hydroxypropyl)trimethylammonium chloride (CAS RN 3327-22-8), in the form of an aqueous solution containing by weight 65 % or more but not more than 71 % 3-chloro-2-hydroxypropyl)trimethylammonium chloride |
1.1.-31.12. |
9 500 tonnes |
0 % |
|
09.2922 |
ex 2923 90 00 |
88 |
Aqueous solution containing by weight 78 % or more but not more than 82 % of [2-(acryloyloxy)ethyl]trimethylammonium chloride (CAS RN 44992-01-0) |
1.1.-31.12. |
10 000 tonnes |
0 % |
|
09.2854 |
ex 2924 19 00 |
85 |
3-Iodoprop-2-yn-1-yl butylcarbamate (CAS RN 55406-53-6) |
1.1.-31.12. |
450 tonnes |
0 % |
|
09.2874 |
ex 2924 29 70 |
87 |
Paracetamol (INN) (CAS RN 103-90-2) |
1.1.-31.12. |
20 000 tonnes |
0 % |
|
09.2742 |
ex 2926 10 00 |
10 |
Acrylonitrile (CAS RN 107-13-1), for use in the manufacture of goods of chapter 55 and heading 6815 () |
1.1.-31.12. |
30 000 tonnes |
0 % |
|
09.2583 |
ex 2926 10 00 |
30 |
Acrylonitrile (CAS RN 107-13-1), for use in the manufacture of goods of headings 2921, 2924, 3903, 3906, 3908, 3911 and 4002 () |
1.1.-31.12. |
20 000 tonnes |
0 % |
|
09.2550 |
ex 2926 90 70 |
31 |
Lambda-cyhalothrin (ISO) (CAS RN 91465-08-6) with a purity by weight of 97 % or more |
1.7.-31.12. |
1 100 tonnes |
0 % |
|
09.2856 |
ex 2926 90 70 |
84 |
2-Nitro-4(trifluoromethyl)benzonitrile (CAS RN 778-94-9) |
1.1.-31.12. |
900 tonnes |
0 % |
|
09.2685 |
ex 2929 90 00 |
30 |
Nitroguanidine (CAS RN 556-88-7) |
1.1.-31.12. |
6 500 tonnes |
0 % |
|
09.2597 |
ex 2930 90 98 |
94 |
Bis[3-(triethoxysilyl)propyl]disulphide (CAS RN 56706-10-6) |
1.1.-31.12. |
6 000 tonnes |
0 % |
|
09.2596 |
ex 2930 90 98 |
96 |
2-Chloro-4-(methylsulphonyl)-3-((2,2,2-trifluoroethoxy)methyl) benzoic acid (CAS RN 120100-77-8) |
1.1.-31.12. |
300 tonnes |
0 % |
|
09.2580 |
ex 2931 90 00 |
75 |
Hexadecyltrimethoxysilane (CAS RN 16415-12-6) with a purity by weight of at least 95 %, for use in the manufacture of polyethylene () |
1.1.-31.12. |
165 tonnes |
0 % |
|
09.2842 |
2932 12 00 |
|
2-Furaldehyde (furfuraldehyde) |
1.1.-31.12. |
10 000 tonnes |
0 % |
|
09.2696 |
ex 2932 20 90 |
25 |
Decan-5-olide (CAS RN 705-86-2) |
1.1.-31.12. |
6 000 kilograms |
0 % |
|
09.2697 |
ex 2932 20 90 |
30 |
Dodecan-5-olide (CAS RN 713-95-1) |
1.1.-31.12. |
6 000 kilograms |
0 % |
|
09.2812 |
ex 2932 20 90 |
77 |
Hexan-6-olide (CAS RN 502-44-3) |
1.1.-31.12. |
4 000 tonnes |
0 % |
|
09.2858 |
2932 93 00 |
|
Piperonal (CAS RN 120-57-0) |
1.1.-31.12. |
220 tonnes |
0 % |
|
09.2839 |
ex 2933 39 99 |
09 |
2-(2-Pyridyl)ethanol (CAS RN 103-74-2) with a purity by weight of 99 % or more |
1.1.-31.12. |
700 tonnes |
0 % |
|
09.2546 |
ex 2933 39 99 |
46 |
Fluopicolide (ISO) (CAS RN 239110-15-7) with a content by weight of 97 % or more |
1.7.-31.12. |
125 tonnes |
0 % |
|
09.2547 |
ex 2933 69 80 |
13 |
Metribuzin (ISO) (CAS RN 21087-64-9) with a purity by weight of 93 % or more |
1.7.-31.12. |
112 500 kilograms |
0 % |
|
09.2860 |
ex 2933 69 80 |
30 |
1,3,5-Tris[3-(dimethylamino)propyl]hexahydro-1,3,5-triazine (CAS RN 15875-13-5) |
1.1.-31.12. |
600 tonnes |
0 % |
|
09.2566 |
ex 2933 99 80 |
05 |
1,4,7,10-Tetraazacyclododecane (CAS RN 294-90-6) with a purity by weight of 96 % or more |
1.1.-31.12. |
60 tonnes |
0 % |
|
09.2544 |
ex 2933 99 80 |
23 |
Tebuconazole (ISO) (CAS RN 107534-96-3) with a purity by weight of 95 % or more |
1.7.-31.12. |
75 tonnes |
0 % |
|
09.2658 |
ex 2933 99 80 |
73 |
5-(Acetoacetylamino)benzimidazolone (CAS RN 26576-46-5) |
1.1.-31.12. |
400 tonnes |
0 % |
|
09.2549 |
ex 2934 99 90 |
16 |
Difenoconazole (ISO) (CAS RN 119446-68-3) |
1.7.-31.12. |
500 tonnes |
0 % |
|
09.2548 |
ex 2934 99 90 |
24 |
Flufenacet (ISO) (CAS RN 142459-58-3) with a purity by weight of 95 % or more |
1.7.-31.12. |
450 tonnes |
0 % |
|
09.2593 |
ex 2934 99 90 |
67 |
5-Chlorothiophene-2-carboxylic acid (CAS RN 24065-33-6) |
1.1.-31.12. |
45 000 kilograms |
0 % |
|
09.2675 |
ex 2935 90 90 |
79 |
4-[[(2-Methoxybenzoyl)amino]sulfonyl]benzoyl chloride (CAS RN 816431-72-8) |
1.1.-31.12. |
1 000 tonnes |
0 % |
|
09.2945 |
ex 2940 00 00 |
20 |
D-Xylose (CAS RN 58-86-6) |
1.1.-31.12. |
400 tonnes |
0 % |
|
09.2686 |
ex 3204 11 00 |
75 |
Colourant C.I. Disperse Yellow 54 (CAS RN 7576-65-0) and preparations based thereon with a colourant C.I. Disperse Yellow 54 content of 99 % or more by weight |
1.1.-31.12. |
250 tonnes |
0 % |
|
09.2676 |
ex 3204 17 00 |
14 |
Preparations based on Colourant C.I. Pigment Red 48:2 (CAS RN 7023-61-2) with a content thereof of 60 % or more but less than 85 % by weight |
1.1.-31.12. |
50 tonnes |
0 % |
|
09.2698 |
ex 3204 17 00 |
30 |
Colourant C.I. Pigment Red 4 (CAS RN 2814-77-9) and preparations based thereon with a colourant C.I. Pigment Red 4 content of 60 % or more by weight |
1.1.-31.12. |
150 tonnes |
0 % |
|
09.2659 |
ex 3802 90 00 |
19 |
Soda flux calcinated diatomaceous earth |
1.1.-31.12. |
35 000 tonnes |
0 % |
|
09.2908 |
ex 3804 00 00 |
10 |
Sodium lignosulphonate (CAS RN 8061-51-6) |
1.1.-31.12. |
40 000 tonnes |
0 % |
|
09.2889 |
3805 10 90 |
|
Sulphate turpentine |
1.1.-31.12. |
25 000 tonnes |
0 % |
|
09.2935 |
ex 3806 10 00 |
10 |
Rosin and resin acids obtained from fresh oleoresins |
1.1.-31.12. |
280 000 tonnes |
0 % |
|
09.2832 |
ex 3808 92 90 |
40 |
Preparation containing 38 % or more but not more than 50 % by weight of pyrithione zinc (INN) (CAS RN 13463-41-7) in an aqueous dispersion |
1.1.-31.12. |
500 tonnes |
0 % |
|
09.2923 |
ex 3808 94 20 |
40 |
Aqueous solution containing by weight: — 10,0 % or more but not more than 11,3 % of 5-chloro-2-methyl-2H-isothiazol-3-one, — 3,0 % or more but not more than 4,1 % of 2-methyl-2H-isothiazol-3-one, — a combined concentration of isothiazolones (CAS RN 55965-84-9) of 13,0 % or more but not more than 15,4 %, — 18 % or more but not more than 22 % of nitrates, calculated as sodium nitrate, and — 5 % or more but not more than 8 % of chlorides, calculated as sodium chloride |
1.1.-31.12. |
3 000 tonnes |
0 % |
|
09.2926 |
ex 3811 21 00 |
31 |
Additive consisting essentially of: — Phosphorodithioic acid, mixed O,O-bis (isobutyl and pentyl) esters, zinc salts (CAS RN 68457-79-4), — 8 % or more by weight but not more than 15 % by weight of mineral oil, for use in the manufacture of blends of additives for lubricating oils () |
1.1.-31.12. |
700 tonnes |
0 % |
|
09.2876 |
ex 3811 29 00 |
57 |
Additives consisting of reaction products of diphenylamine and branched nonenes with: — more than 20 % but not more than 50 % by weight 4-monononyldiphenylamine, and — more than 50 % but not more than 80 % by weight 4,4'-dinonyldiphenylamine, — a total percentage of 2,4-dinonyldiphenylamine and 2,4'-dinonyldiphenylamine of not more than 15 % by weight, used for the manufacture of lubricating oils () |
1.1.-31.12. |
900 tonnes |
0 % |
|
09.2927 |
ex 3811 29 00 |
80 |
Additives containing: — more than 70 % by weight of 2,5-bis(tert-nonyldithio)-[1,3,4]-thiadiazole (CAS RN 89347-09-1), and — more than 15 % by weight of 5-(tert-nonyldithio)- 1,3,4-thiadiazole-2(3H)-thione (CAS RN 97503-12-3), for use in the manufacture of lubricating oils () |
1.1.-31.12. |
500 tonnes |
0 % |
|
09.2814 |
ex 3815 90 90 |
76 |
Catalyst consisting of titanium dioxide and tungsten trioxide |
1.1.-31.12. |
3 000 tonnes |
0 % |
|
09.2644 |
ex 3824 99 92 |
77 |
Preparation containing by weight: — 55 % or more but not more than 78 % of dimethyl gluterate (CAS RN 1119-40-0), — 10 % or more but not more than 30 % of dimethyl adipate (CAS RN 627-93-0), and — not more than 35 % of dimethyl succinate (CAS RN 106-65-0) |
1.1.-31.12. |
10 000 tonnes |
0 % |
|
09.2907 |
ex 3824 99 93 |
67 |
Mixture of phytosterols, in the form of powder, containing by weight: — 75 % or more of sterols, — not more than 25 % of stanols, for use in the manufacture of stanols/sterols or stanol/sterol esters () |
1.1.-31.12. |
2 500 tonnes |
0 % |
|
09.2568 |
ex 3824 99 96 |
91 |
Mixture, in pellet form, containing by weight: — 49 % or more but not more than 50 % of bis[3-(triethoxysilyl)propyl] polysulphides (CAS RN 211519-85-6), and — 50 % or more but not more than 51 % of carbon black (CAS RN 1333-86-4), of which 75 % by weight or more pass through a sieve with an aperture of 0,60 mm, but not more than 10 % pass through a sieve with an aperture of 0,25 mm (as determined by the ASTM D1511 method) |
1.1.-31.12. |
2 100 tonnes |
0 % |
|
09.2820 |
ex 3827 90 00 |
10 |
Mixtures containing by weight: — 60 % or more but not more than 90 % of 2-chloropropene (CAS RN 557-98-2), — 8 % or more but not more than 14 % of (Z)-1-chloropropene (CAS RN 16136-84-8), — 5 % or more but not more than 23 % of 2-chloropropane (CAS RN 75-29-6), — not more than 6 % of 3-chloropropene (CAS RN 107-05-1), and — not more than 1 % of ethyl chloride (CAS RN 75-00-3) |
1.1.-31.12. |
6 000 tonnes |
0 % |
|
09.2671 |
ex 3905 99 90 |
81 |
Poly(vinyl butyral)(CAS RN 63148-65-2): — containing by weight 17,5 % or more, but not more than 20 % of hydroxyl groups, and — with a median particle size (D50) of more than 0,6 mm |
1.1.-31.12. |
12 500 tonnes |
0 % |
|
09.2846 |
ex 3907 40 00 |
25 |
Polymer blend of polycarbonate and poly(methyl methacrylate) with a polycarbonate content of not less than 98,5 % by weight, in the form of pellets or granules, with a luminous transmittance of not less than 88,5 %, measured using a test sample with a thickness of 4 mm at a wavelength of λ = 400 nm (according to ISO 13468-2) |
1.1.-31.12. |
2 000 tonnes |
0 % |
|
09.2585 |
ex 3907 99 80 |
70 |
Copolymer of poly(ethylene terephthalate) and cyclohexane dimethanol, containing more than 10 % by weight of cyclohexane dimethanol |
1.1.-31.12. |
60 000 tonnes |
2 % |
|
09.2855 |
ex 3910 00 00 |
10 |
Liquid poly(methylhydrosiloxane) with terminal trimethylsilyl groups (CAS RN 63148-57-2) with a purity by weight of 99,9 % or more |
1.1.-31.12. |
1 000 tonnes |
0 % |
|
09.2931 |
ex 3911 90 11 |
10 |
Poly(oxy-1,4-phenylenesulphonyl-1,4-phenyleneoxy-1,4-phenyleneisopropylidene-1,4-phenylene) (CAS RN 25135-51-7 and CAS RN 25154-01-2), in one of the forms mentioned in note 6(b) to this chapter containing by weight not more than 20 % of additives |
1.1.-31.12. |
6 300 tonnes |
0 % |
|
09.2723 |
ex 3911 90 19 |
35 |
Poly(oxy-1,4-phenylenesulfonyl-1,4-phenyleneoxy-4,4'-biphenylene) (CAS RNs 25608-64-4 and 25839-81-0) containing by weight not more than 20 % of additives |
1.1.-31.12. |
5 000 tonnes |
0 % |
|
09.2816 |
ex 3912 11 00 |
20 |
Cellulose acetate flakes |
1.1.-31.12. |
75 000 tonnes |
0 % |
|
09.2561 |
ex 3912 39 85 |
60 |
Hypromellose (INN) (CAS RN 9004-65-3), for use in the manufacturing of food supplements or pharmaceuticals () |
1.1.-31.12. |
2 750 tonnes |
0 % |
|
09.2573 |
ex 3913 10 00 |
20 |
Sodium alginate extracted from brown seaweed (CAS RN 9005-38-3), with — a loss on drying of not more than 15 % by weight (4h at 105 oC), — a water-insoluble fraction of not more than 2 % by weight, calculated on the dry weight |
1.1.-31.12. |
2 000 tonnes |
0 % |
|
09.2641 |
ex 3913 90 00 |
87 |
Sodium hyaluronate, non sterile, with: — a weight average molecular weight (Mw) of not more than 900 000 , — an endotoxin level of not more than 0,008 Endotoxin units (EU)/mg, — an ethanol content of not more than 1 % by weight, — an isopropanol content of not more than 0,5 % by weight |
1.1.-31.12. |
300 kilograms |
0 % |
|
09.2661 |
ex 3920 51 00 |
50 |
Sheets of polymethylmethacrylate conforming to standards: — EN 4364 (MIL-P-5425E) and DTD5592A, or — EN 4365 (MIL-P-8184) and DTD5592A |
1.1.-31.12. |
100 tonnes |
0 % |
|
09.2645 |
ex 3921 14 00 |
20 |
Cellular block of regenerated cellulose, impregnated with water containing magnesium chloride and quaternary ammonium compounds, measuring 100 cm (± 10 cm) x 100 cm (± 10 cm) x 40 cm (± 5 cm) |
1.1.-31.12. |
1 700 tonnes |
0 % |
|
09.2572 |
ex 5205 26 00 ex 5205 27 00 |
10 10 |
Raw white single cotton yarn — of combed fibres, — with an average fibre length of 36,5 mm or more, — produced through the compact ring spinning process with pneumatic compression, — with a tear strength of 26,5 cN/tex or more (according to ISO 2062:2009, at a speed of 5,000 mm/min) |
1.1.-31.12. |
50 000 tonnes |
0 % |
|
09.2848 |
ex 5505 10 10 |
10 |
Waste of synthetic fibres (including noils, yarn waste, and garnetted stock) of nylon or other polyamides (PA6 and PA66) |
1.1.-31.12. |
10 000 tonnes |
0 % |
|
09.2721 |
ex 5906 99 90 |
20 |
Woven and laminated rubberised textile fabric with the following characteristics: — with three layers, — one outer layer consists of acrylic fabric, — the other outer layer consists of polyester fabric, — the middle layer consists of chlorobutyl rubber, — the middle layer has a weight of 452 g/m2 or more but not more than 569 g/m2, — the textile fabric has a total weight of 952 g/m2 or more but not more than 1159 g/m2, and — the textile fabric has a total thickness of 0,8 mm or more but not more than 4 mm, used for the manufacture of the retractable roof of motor vehicles () |
1.1.-31.12. |
375 000 square meters |
0 % |
|
09.2628 |
ex 7019 66 00 |
10 |
Glass web woven from glass fibre coated in plastic, of a weight of 120 g/m2(± 10 g/m2), of a type used in rolling insect screens with fixed frames |
1.1.-31.12. |
3 000 000 square meters |
0 % |
|
09.2652 |
ex 7409 11 00 ex 7410 11 00 |
30 40 |
Refined copper foil and strips, electrolytically manufactured, with a thickness of 0,015 mm or more |
1.1.-31.12. |
1 020 tonnes |
0 % |
|
09.2662 |
ex 7410 21 00 |
55 |
Plates: — consisting of at least one layer of fibreglass fabric impregnated with epoxide resin, — covered on one or both sides with copper foil with a thickness of not more than 0,15 mm, — with a dielectric constant (DK) of less than 5,4 at 1 MHz, as measured according to IPC-TM-650 2.5.5.2, — with a loss tangent of less than 0,035 at 1 MHz, as measured according to IPC-TM-650 2.5.5.2, — with a comparative tracking index (CTI) of 600 or more |
1.1.-31.12. |
80 000 square meters |
0 % |
|
09.2835 |
ex 7604 29 10 |
30 |
Aluminium alloy rods with a diameter of 300,1 mm or more, but not more than 533,4 mm |
1.1.-31.12. |
1 000 tonnes |
0 % |
|
09.2736 |
ex 7607 11 90 ex 7607 11 90 ex 7607 11 90 ex 7607 11 90 |
75 77 78 79 |
Aluminium and magnesium alloy strip or foil: — of an alloy conforming to standards 5182-H19 or 5052-H19, — in rolls with an outside diameter of minimum 1 250 mm but not more than 1 350 mm, — of a thickness (tolerance -0,006 mm) of 0,15 mm, 0,16 mm, 0,18 mm or 0,20 mm, — of a width (tolerance ±0,3 mm) of 12,5 mm, 15,0 mm, 16,0 mm, 25,0 mm, 35,0 mm, 50,0 mm or 356 mm, — having a camber tolerance of not more than 0,4 mm/750 mm, — of a flatness measurement: I-unit ±4, — having a tensile strength of more than (5182-H19) 365 MPa or (5052-H19) 320 MPa, and — of an elongation A50 of more than (5182-H19) 3 % or (5052-H19) 2,5 %, for use in the manufacture of slats for blinds () |
1.1.-31.12. |
600 tonnes |
0 % |
|
09.2722 |
8104 11 00 |
|
Unwrought magnesium, containing at least 99,8 % by weight of magnesium |
1.1.-31.12. |
120 000 tonnes |
0 % |
|
09.2840 |
ex 8104 30 00 |
20 |
Magnesium powder: — of purity by weight of 98 % or more, but not more than 99,5 %, and — with a particle size of 0,2 mm or more but not more than 0,8 mm |
1.1.-31.12. |
2 000 tonnes |
0 % |
|
09.2629 |
ex 8302 49 00 |
91 |
Aluminium telescopic handle for use in the manufacture of luggage () |
1.1.-31.12. |
1 500 000 pieces |
0 % |
|
09.2720 |
ex 8413 91 00 |
50 |
Pump head for two cylinder high pressure pump made of forged steel, with: — milled threaded fittings with a diameter of 10 mm or more but not more than 36,8 mm, and — drilled fuel channels with a diameter of 3,5 mm or more but not more than 10 mm, of a kind used in diesel injection systems |
1.1.-31.12. |
65 000 pieces |
0 % |
|
09.2569 |
ex 8414 90 00 |
80 |
Turbocharger wheel housing of cast aluminium alloy or cast iron: — with a heat resistance up to 400 oC, — with a hole of 30 mm or more but not more than 300 mm for the insertion of the compressor wheel, for use in the automotive industry () |
1.1.-31.12. |
4 000 000 pieces |
0 % |
|
09.2570 |
ex 8482 91 90 |
10 |
Rollers with a logarithmic profile and a diameter of 25 mm or more but not more than 70 mm or balls with a diameter of 30 mm but not more than 100 mm, — made of 100Cr6 steel or 100CrMnSi6-4 steel (ISO 3290), — with a deviation of 0,5 mm or less as determined with the FBHmethod for use in wind turbine industry () |
1.1.-31.12. |
600 000 pieces |
0 % |
|
09.2562 |
ex 8482 99 00 |
30 |
Brass cages with the following characteristics: — continuously or centrifugally cast, — turned, — containing by weight 35 % or more, but not more than 38 % of zinc, — containing by weight 0,75 % or more, but not more than 1,25 % of lead, — containing by weight 1,0 % or more, but not more than 1,4 % of aluminium, and — with a tensile strength of 415 Pa or more, of a kind used for the manufacture of ball bearings |
1.1.-31.12. |
550 000 pieces |
0 % |
|
09.2557 |
ex 8482 99 00 |
60 |
Inner or outer rings made of steel, not hardened or not grinded, outer ring with internal raceway(s), inner ring with external raceway(s), with external diameters of: — 14 mm or more but not more than 77 mm for the inner ring, — 26 mm or more but not more than 101 mm for the outer ring, for use in the manufacture of bearings () |
1.7.-31.12. |
1 000 pieces |
0 % |
|
09.2552 |
ex 8482 99 00 |
70 |
Male and female parts of cages, — made of flat-rolled steel, — with a diameter of 14,5 mm or more but not more than 420 mm, — the male part including rivets, — the female part including holes, used for manufacturing of deep grove ball bearings () |
1.7.-31.12. |
610 500 kilograms |
0 % |
|
09.2553 |
ex 8482 99 00 |
80 |
Punched cages of various diameters, — made of flat rolled steel, — with tensile strength of 270 MPa or more, for the production of tapered roller bearings () |
1.7.-31.12. |
4 000 000 pieces |
0 % |
|
09.2560 |
ex 8501 31 00 |
85 |
Power transmission device for controlling the output of exhaust gas turbochargers, consisting of: — a DC motor of an output not exceeding 600 W, — for usage with a supply voltage of 8 V or more but no more than 48 V, — with motor connection (plug-in connection), — whether or not with position sensor, — whether or not with integrated control and power electronics, — whether or not with spring mechanism for resetting the lever, — built in a housing with reduction gear and lever attached to the motor drive shaft, or — built in a housing with threads integrated into the rotor of the motor for linear movement of the integrated control rod |
1.7.-31.12. |
325 000 pieces |
0 % |
|
09.2559 |
ex 8501 40 20 ex 8501 40 80 |
70 70 |
Electric AC motor, single-phase, whether or not with commutator — with a nominal output of 180 W or more, — with an input power of 150 W or more but not more than 2 700 W, — with an external diameter of more than 44,8 but not more than 135,2 mm, — with a rated speed of more than 10 000 rpm but not more than 50 000 rpm, — whether or not equipped with air-inducting ventilator, — whether or not with mechanical device (pinion, screws, gear connection etc.) on the shaft, for use in the manufacture of domestic appliances () |
1.7.-31.12. |
1 000 000 pieces |
0 % |
|
09.2554 |
ex 8505 11 10 ex 8505 11 90 ex 8505 19 90 |
74 74 74 |
Articles in shape of flat bars, arched bars, quarter sleeves or trapezoid whether or not arched, rounded corners or oblique sides made of ferrite, or cobalt, or samarium or other rare-earth metals, or their alloy, — whether or not overmolded with polymers, — whether or not coated or passivated with a surface treatment, with: — a length of 5 mm or more, but not more than 60 mm, — a width of 5 mm or more, but not more than 40 mm, — a thickness of 3 mm or more, but not more than 15 mm, intended to become permanent magnets after magnetisation |
1.7.-31.12. |
230 tonnes |
0 % |
|
09.2555 |
ex 8505 11 10 |
76 |
Articles of an alloy of neodymium, or an alloy of samarium, — whether or not coated or passivated with a surface treatment, — whether or not covered with zinc, — in the shape of rectangles, with: — a length of 13,8 mm or more but not more than 45,2 mm, — a width of 7,8 mm or more but not more than 25,2 mm, — a height of 1,3 mm or more but not more than 4,7 mm, intended to become permanent magnets after magnetisation |
1.7.-31.12. |
175 tonnes |
0 % |
|
09.2556 |
ex 8505 11 10 |
77 |
Article of an alloy of neodymium, in the form of arched rectangles, whether or not coated or passivated with a surface treatment, with: — a width of 9,1 mm or more but not more than 10,5 mm, — a length of 20 mm or more but not more than 30,1 mm, intended to become permanent magnets after magnetization |
1.7.-31.12. |
25 tonnes |
0 % |
|
09.2574 |
ex 8537 10 91 |
73 |
Multifunctional device (instrument cluster) with: — curved TFT LCD display (radius 750 mm) with touch-sensitive surfaces, — microprocessors and memory chips, — acoustic module and loudspeaker, — connections for CAN, 3 x LIN bus, LVDS and Ethernet, — for operating various functions (e.g. chassis, lighting) and — for situation-related display of vehicle and navigation data (e.g. speed, odometer, charge level of the drive battery), for use in the manufacture of passenger cars powered solely by an electric motor covered by HS subheading 8703 80 () |
1.1.-31.12. |
66 900 pieces |
0 % |
|
09.2558 |
ex 8543 70 90 |
87 |
An electronic sound generator, creating an analog signal for a device producing the sound of an engine, containing: — a printed circuit board with a microprocessor and a sound amplifier, — a connector, — a plastic housing, — with or without a metal holder, for use in the manufacture of goods of Chapter 87 () |
1.1.-31.12. |
30 000 pieces |
0 % |
|
09.2910 |
ex 8708 99 97 |
75 |
Aluminium alloy support bracket, with mounting holes, whether or not with fixation nuts, for indirect connection of the gearbox to the car body for use in the manufacture of goods of Chapter 87 () |
1.1.-31.12. |
200 000 pieces |
0 % |
|
09.2668 |
ex 8714 91 10 ex 8714 91 10 ex 8714 91 10 |
21 31 75 |
Bicycle frame, constructed from carbon fibres and artificial resin, for use in the manufacture of bicycles (including electric bicycles) () |
1.1.-31.12. |
600 000 pieces |
0 % |
|
09.2564 |
ex 8714 91 10 ex 8714 91 10 ex 8714 91 10 |
25 35 77 |
Frame, constructed from aluminium or aluminium and carbon fibres and artificial resin, for the use in the manufacture of bicycles (including electric bicycles) () |
1.1.-31.12. |
9 600 000 pieces |
0 % |
|
09.2579 |
ex 9029 20 31 ex 9029 90 00 |
40 40 |
Clustered instrument panel with: — stepping motors, — analog pointers and dials, — or without microprocessor control board, — or without LED indicators or LCD display, — showing at least: — — speed, — engine revolutions, — engine temperature, — the fuel level, — communicating via CAN-BUS and/or K-LINE protocols, for use in the manufacture of goods of Chapter 87 () |
1.1.-31.12. |
160 000 pieces |
0 % |
|
(1)
Suspension of duties is subject to end-use customs supervision in accordance with Article 254 of Regulation (EU) No 952/2013.
(2)
However, the suspension of tariff duties does not apply where the processing is carried out by retail or catering undertakings. |
||||||
( 1 ) Regulation (EU) No 952/2013 of the European Parliament and of the Council of 9 October 2013 laying down the Union Customs Code (OJ L 269, 10.10.2013, p. 1).