EUR-Lex Access to European Union law
This document is an excerpt from the EUR-Lex website
Document 02017R0852-20231016
Regulation (EU) 2017/852 of the European Parliament and of the Council of 17 May 2017 on mercury, and repealing Regulation (EC) No 1102/2008 (Text with EEA relevance)Text with EEA relevance
Consolidated text: Regulation (EU) 2017/852 of the European Parliament and of the Council of 17 May 2017 on mercury, and repealing Regulation (EC) No 1102/2008 (Text with EEA relevance)Text with EEA relevance
Regulation (EU) 2017/852 of the European Parliament and of the Council of 17 May 2017 on mercury, and repealing Regulation (EC) No 1102/2008 (Text with EEA relevance)Text with EEA relevance
02017R0852 — EN — 16.10.2023 — 002.001
This text is meant purely as a documentation tool and has no legal effect. The Union's institutions do not assume any liability for its contents. The authentic versions of the relevant acts, including their preambles, are those published in the Official Journal of the European Union and available in EUR-Lex. Those official texts are directly accessible through the links embedded in this document
REGULATION (EU) 2017/852 OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 17 May 2017 on mercury, and repealing Regulation (EC) No 1102/2008 (OJ L 137 24.5.2017, p. 1) |
Amended by:
|
|
Official Journal |
||
No |
page |
date |
||
COMMISSION DELEGATED REGULATION (EU) 2022/2526 of 23 September 2022 |
L 328 |
66 |
22.12.2022 |
|
COMMISSION DELEGATED REGULATION (EU) 2023/2049 of 14 July 2023 |
L 236 |
21 |
26.9.2023 |
REGULATION (EU) 2017/852 OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL
of 17 May 2017
on mercury, and repealing Regulation (EC) No 1102/2008
(Text with EEA relevance)
CHAPTER I
GENERAL PROVISIONS
Article 1
Subject matter and objective
This Regulation establishes measures and conditions concerning the use and storage of and trade in mercury, mercury compounds and mixtures of mercury, and the manufacture and use of and trade in mercury-added products, and the management of mercury waste, in order to ensure a high level of protection of human health and the environment from anthropogenic emissions and releases of mercury and mercury compounds.
Member States may, where appropriate, apply stricter requirements than those laid down in this Regulation, in accordance with the TFEU.
Article 2
Definitions
For the purposes of this Regulation, the following definitions apply:
‘mercury’ means metallic mercury (Hg, CAS RN 7439-97-6);
‘mercury compound’ means any substance consisting of atoms of mercury and one or more atoms of other chemical elements that can be separated into different components only by chemical reactions;
‘mixture’ means a mixture or solution composed of two or more substances;
‘mercury-added product’ means a product or product component that contains mercury or a mercury compound that was intentionally added;
‘mercury waste’ means metallic mercury that qualifies as waste as defined in point (1) of Article 3 of Directive 2008/98/EC;
‘export’ means any of the following:
the permanent or temporary export of mercury, mercury compounds, mixtures of mercury and mercury-added products meeting the conditions of Article 28(2) TFEU;
the re-export of mercury, mercury compounds, mixtures of mercury and mercury-added products not meeting the conditions of Article 28(2) TFEU which are placed under a customs procedure other than the external Union transit procedure for movement of goods through the customs territory of the Union;
‘import’ means the physical introduction into the customs territory of the Union of mercury, mercury compounds, mixtures of mercury and mercury-added products that are placed under a customs procedure other than the external Union transit procedure for movement of goods through the customs territory of the Union;
‘disposal’ means disposal as defined in point (19) of Article 3 of Directive 2008/98/EC;
‘primary mercury mining’ means mining in which the principal material sought is mercury;
‘conversion’ means the chemical transformation of the physical state of mercury from a liquid state to mercury sulfide or a comparable chemical compound that is equally or more stable and equally or less soluble in water and that presents no greater environmental or health hazard than mercury sulfide;
‘placing on the market’ means supplying or making available, whether in return for payment or free of charge, to a third party. Import shall be deemed to be placing on the market.
CHAPTER II
TRADE AND MANUFACTURING RESTRICTIONS CONCERNING MERCURY, MERCURY COMPOUNDS, MIXTURES OF MERCURY AND MERCURY-ADDED PRODUCTS
Article 3
Export restrictions
Article 4
Import restrictions
Without prejudice to Article 11 and by way of derogation from the first subparagraph of this paragraph, the import of mercury and the import of the mixtures of mercury listed in Annex I for a use allowed in a Member State shall be allowed where the importing Member State has granted written consent to such import in either of the following circumstances:
the exporting country is a Party to the Convention and the exported mercury is not from primary mercury mining that is prohibited under Article 3(3) and (4) of the Convention; or
the exporting country not being a Party to the Convention has provided certification that the mercury is not from primary mercury mining.
Without prejudice to any national measures adopted in accordance with the TFEU, a use allowed pursuant to Union legislation shall be deemed to be a use allowed in a Member State for the purposes of this paragraph.
Article 5
Export, import and manufacturing of mercury-added products
The prohibition laid down in paragraph 1 shall not apply to any of the following mercury-added products:
products that are essential for civil protection and military uses;
products for research, for calibration of instrumentation, or for use as a reference standard.
Article 6
Forms for import and export
The Commission shall adopt decisions, by means of implementing acts, to specify forms to be used for the purpose of implementing Articles 3 and 4. Those implementing acts shall be adopted in accordance with the examination procedure referred to in Article 22(2).
CHAPTER III
RESTRICTIONS ON USE AND STORAGE OF MERCURY, MERCURY COMPOUNDS AND MIXTURES OF MERCURY
Article 7
Industrial activities
In order to ensure the uniform application of the obligation laid down in the first subparagraph of this paragraph, the Commission may adopt implementing acts setting out technical requirements for environmentally sound interim storage of mercury, mercury compounds and mixtures of mercury in line with decisions adopted by the Conference of the Parties to the Convention in accordance with Article 10(3) and Article 27 of the Convention, provided that the Union has supported the decision concerned by means of a Council decision adopted in accordance with Article 218(9) TFEU. Those implementing acts shall be adopted in accordance with the examination procedure referred to in Article 22(2) of this Regulation.
Article 8
New mercury-added products and new manufacturing processes
The first subparagraph shall not apply to any of the following:
equipment which is necessary for the protection of the essential interests of the security of Member States, including arms, munitions and war material intended for specifically military purposes;
equipment designed to be sent into space;
technical improvements made to or the redesign of mercury-added products that were being manufactured prior to 1 January 2018 provided that such improvements or redesign lead to less mercury being used in those products.
The first subparagraph of this paragraph shall not apply to processes manufacturing or using mercury-added products other than those subject to the prohibition laid down in paragraph 1.
Where an economic operator intends to apply for a decision pursuant to paragraph 6 in order to manufacture or place on the market a new mercury-added product, or to use a new manufacturing process, that would provide significant environmental or health benefits and pose no significant risks either to the environment or to human health, and where no technically practicable mercury-free alternatives providing such benefits are available, that economic operator shall notify the competent authorities of the Member State concerned. That notification shall include the following information:
a technical description of the product or process concerned;
an assessment of its environmental and health benefits and risks;
evidence demonstrating the absence of technically practicable mercury-free alternatives providing significant environmental or health benefits;
a detailed explanation of the manner in which the process is to be operated or the product is to be manufactured, used and disposed of as waste after use, in order to ensure a high level of protection of the environment and of human health.
The Member State concerned shall inform the Commission of cases in which it considers that the criteria referred to in the first subparagraph of paragraph 6 were not fulfilled.
The Commission shall inform the Member States of the outcome of the assessment.
The Commission shall adopt decisions, by means of implementing acts, specifying whether the relevant new mercury-added product or new manufacturing process is authorised. Those implementing acts shall be adopted in accordance with the examination procedure referred to in Article 22(2).
Article 9
Artisanal and small-scale gold mining and processing
Article 10
Dental amalgam
Member States shall make their national plans publicly available on the internet and shall transmit them to the Commission within one month of their adoption.
Such operators shall ensure that:
amalgam separators put into service from 1 January 2018 provide a retention level of at least 95 % of amalgam particles;
from 1 January 2021, all amalgam separators in use provide the retention level specified in point (a).
Amalgam separators shall be maintained in accordance with the manufacturer's instructions to ensure the highest practicable level of retention.
Dental practitioners shall not release directly or indirectly such amalgam waste into the environment under any circumstances.
CHAPTER IV
DISPOSAL OF WASTE AND MERCURY WASTE
Article 11
Waste
Without prejudice to point (5) of Article 2 of this Regulation, mercury and mercury compounds, whether in pure form or in mixtures, from any of the following large sources shall be considered to be waste within the meaning of Directive 2008/98/EC and be disposed of without endangering human health or harming the environment, in accordance with that Directive:
the chlor-alkali industry;
the cleaning of natural gas;
non-ferrous mining and smelting operations;
extraction from cinnabar ore in the Union.
Such disposal shall not lead to any form of reclamation of mercury.
Article 12
Reporting on large sources
Economic operators within the industry sectors referred to in points (a), (b) and (c) of Article 11 shall send, each year by 31 May, the following to the competent authorities of the Member States concerned:
data on the total amount of mercury waste stored in each of their installations;
data on the total amount of mercury waste sent to individual facilities undertaking the temporary storage, the conversion and, if applicable, solidification of mercury waste, or the permanent storage of mercury waste that underwent conversion and, if applicable, solidification;
the location and contact details of each facility referred to in point (b);
a copy of the certificate provided by the operator of the facility undertaking the temporary storage of mercury waste, in accordance with Article 14(1);
a copy of the certificate provided by the operator of the facility undertaking the conversion and, if applicable, the solidification of mercury waste, in accordance with Article 14(2);
a copy of the certificate provided by the operator of the facility undertaking the permanent storage of mercury waste that underwent conversion and, if applicable, solidification, in accordance with Article 14(3).
Article 13
Storage of mercury waste
The derogation set out in the first subparagraph shall cease to apply as from 1 January 2026.
Mercury waste that underwent conversion and, if applicable, solidification shall only be permanently disposed of in the following permanent storage facilities licensed for disposal of hazardous waste:
salt mines that are adapted for the permanent storage of mercury waste that underwent conversion, or deep underground hard rock formations providing a level of safety and confinement equivalent to or higher than that of such salt mines; or
above-ground facilities dedicated to and equipped for the permanent storage of mercury waste that underwent conversion and solidification and that provide a level of safety and confinement equivalent to or higher than that of the facilities referred to in point (a).
Operators of permanent storage facilities shall ensure that mercury waste that underwent conversion and, if applicable, solidification is stored separately from other waste and in disposal batches in a storage chamber that is sealed. Those operators shall further ensure that the requirements set out in Directive 1999/31/EC, including the specific requirements for the temporary storage of mercury waste established in the third and fifth indents of Section 8 of Annex I and in Annex II to that Directive, are complied with in relation to the permanent storage facilities.
Article 14
Traceability
Operators of facilities undertaking the temporary storage of mercury waste shall establish a register including the following:
for each shipment of mercury waste received:
the origin and amount of that waste;
the name and contact details of the supplier and the owner of that waste;
for each shipment of mercury waste leaving the facility:
the amount of that waste and its mercury content;
the destination and intended disposal operation of that waste;
a copy of the certificate provided by the operator of the facility undertaking the conversion and, if applicable, the solidification of that waste, as referred to in paragraph 2;
a copy of the certificate provided by the operator of the facility undertaking the permanent storage of the mercury waste that underwent conversion and, if applicable, solidification, as referred to in paragraph 3;
the amount of mercury waste stored at the facility at the end of each month.
Operators of facilities undertaking the temporary storage of mercury waste shall, as soon as the mercury waste is taken out of temporary storage, issue a certificate confirming that the mercury waste was sent to a facility undertaking disposal operations covered by this Article.
Once a certificate as referred to in the second subparagraph of this paragraph is issued, a copy thereof shall be transmitted without delay to the economic operators concerned referred to in Article 12.
Operators of facilities undertaking the conversion and, if applicable, the solidification of mercury waste shall establish a register including the following:
for each shipment of mercury waste received:
the origin and amount of that waste;
the name and contact details of the supplier and the owner of that waste;
for each shipment of mercury waste that underwent conversion and, if applicable, solidification leaving the facility:
the amount of that waste and its mercury content;
the destination and intended disposal operation of that waste;
a copy of the certificate provided by the operator of the facility undertaking the permanent storage of that waste, as referred to in paragraph 3;
the amount of mercury waste stored at the facility at the end of each month.
Operators of facilities undertaking the conversion and, if applicable, the solidification of mercury waste shall, as soon as the conversion and, if applicable, the solidification operation of the entire shipment is completed, issue a certificate confirming that the entire shipment of mercury waste has been converted and, if applicable, solidified.
Once a certificate as referred to in the second subparagraph of this paragraph is issued, a copy thereof shall be transmitted without delay to the operators of the facilities referred to in paragraph 1 of this Article and to the economic operators concerned referred to in Article 12.
Once a certificate as referred to in the first subparagraph of this paragraph is issued, a copy thereof shall be transmitted without delay to the operators of the facilities referred to in paragraphs 1 and 2 of this Article as well as to the economic operators concerned referred to in Article 12.
Article 15
Contaminated sites
CHAPTER V
PENALTIES, COMPETENT AUTHORITIES AND REPORTING
Article 16
Penalties
Member States shall lay down the rules on penalties applicable to infringements of this Regulation and shall take all measures necessary to ensure that they are implemented. The penalties provided for shall be effective, proportionate and dissuasive. Member States shall, by the respective dates of application of the relevant provisions of this Regulation, notify the Commission of those rules and of those measures and shall notify it, without delay, of any subsequent amendment affecting them.
Article 17
Competent authorities
Member States shall designate the competent authorities responsible for carrying out obligations arising from this Regulation.
Article 18
Report
By 1 January 2020 and at appropriate intervals thereafter, Member States shall prepare, provide to the Commission and make publicly available on the internet a report with the following:
information concerning the implementation of this Regulation;
information needed for the fulfilment by the Union of its reporting obligation under Article 21 of the Convention;
a summary of the information gathered in accordance with Article 12 of this Regulation;
information regarding mercury located in their territories:
a list of sites where stocks of more than 50 metric tonnes of mercury other than mercury waste are located as well as the amount of mercury at each site;
a list of sites where more than 50 metric tonnes of mercury waste is accumulated as well as the amount of mercury waste at each site; and
a list of sources supplying more than 10 metric tonnes of mercury per year, where Member States are made aware of such sources.
Member States may decide not to make any of the information referred to in the first subparagraph publicly available on any of the grounds mentioned in Article 4(1) and (2) of Directive 2003/4/EC of the European Parliament and of the Council ( 4 ), subject to the second subparagraph of Article 4(2) of that Directive.
The Commission shall adopt implementing acts to establish appropriate questionnaires in order to specify the content, the information and the key performance indicators needed to meet the requirements under paragraph 1 as well as the format and the frequency of the report referred to in paragraph 1. Those questionnaires shall not duplicate reporting obligations of the Parties to the Convention. The implementing acts referred to in this paragraph shall be adopted in accordance with the examination procedure referred to in Article 22(2).
Article 19
Review
By 30 June 2020, the Commission shall report to the European Parliament and to the Council on the outcome of its assessment regarding:
the need for the Union to regulate emissions of mercury and mercury compounds from crematoria;
the feasibility of a phase out of the use of dental amalgam in the long term, and preferably by 2030, taking into account the national plans referred to in Article 10(3) and whilst fully respecting Member States' competence for the organisation and delivery of health services and medical care; and
the environmental benefits and the feasibility of a further alignment of Annex II with relevant Union legislation regulating the placing on the market of mercury-added products.
CHAPTER VI
DELEGATED AND IMPLEMENTING POWERS
Article 20
Amendment of Annexes
The Commission is empowered to adopt delegated acts in accordance with Article 21 of this Regulation in order to amend its Annexes I, II, III and IV to align them with decisions adopted by the Conference of the Parties to the Convention in accordance with Article 27 of the Convention, provided that the Union has supported the decision concerned by means of a Council decision adopted in accordance with Article 218(9) TFEU.
Article 21
Exercise of the delegation
Article 22
Committee procedure
Where the committee delivers no opinion, the Commission shall not adopt the draft implementing act and the third subparagraph of Article 5(4) of Regulation (EU) No 182/2011 shall apply.
CHAPTER VII
FINAL PROVISIONS
Article 23
Repeal
Regulation (EC) No 1102/2008 is repealed with effect from 1 January 2018.
References to the repealed Regulation shall be construed as references to this Regulation and shall be read in accordance with the correlation table in Annex V.
Article 24
Entry into force
This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.
It shall apply from 1 January 2018.
However, point (d) of Part I of Annex III shall apply from 11 December 2017.
This Regulation shall be binding in its entirety and directly applicable in all Member States.
ANNEX I
Mercury compounds subject to Article 3(2) and (3) and Article 7(3) and mixtures of mercury subject to Article 3(2), Article 4(1) and Article 7(3)
Mercury compounds prohibited for export from 1 January 2018:
Mercury compounds prohibited for export from 1 January 2020:
Mixtures of mercury prohibited for export and import from 1 January 2018:
ANNEX II
Mercury-added products referred to in Article 5
Part A — Mercury-added products
Mercury-added products |
Date from which the export, import and manufacturing of the mercury-added products are prohibited |
1. Batteries or accumulators that contain more than 0,0005 % of mercury by weight. |
31.12.2020 |
2. Switches and relays, except very high accuracy capacitance and loss measurement bridges and high frequency radio frequency switches and relays in monitoring and control instruments with a maximum mercury content of 20 mg per bridge, switch or relay. |
31.12.2020 |
3. Compact fluorescent lamps (CFLs) for general lighting purposes: (a) CFL.i ≤ 30 watts with a mercury content exceeding 2,5 mg per lamp burner; (b) CFL.ni ≤ 30 watts with a mercury content exceeding 3,5 mg per lamp burner. |
31.12.2018 |
3a. Compact fluorescent lamps with an integrated ballast (CFL.i) for general lighting purposes that are ≤ 30 watts with a mercury content not exceeding 2,5 mg per lamp burner. |
31.12.2025 |
4. The following linear fluorescent lamps (LFLs) for general lighting purposes: (a) Triband phosphor < 60 watts with a mercury content exceeding 5 mg per lamp; (b) Halophosphate phosphor ≤ 40 watts with a mercury content exceeding 10 mg per lamp. |
31.12.2018 |
5. High pressure mercury vapour lamps (HPMVs) for general lighting purposes. |
31.12.2018 |
6. The following mercury-added cold cathode fluorescent lamps and external electrode fluorescent lamps (CCFLs and EEFLs) for electronic displays: (a) short length (≤ 500 mm) with mercury content exceeding 3,5 mg per lamp; (b) medium length (> 500 mm and ≤ 1 500 mm) with mercury content exceeding 5 mg per lamp; (c) long length (> 1 500 mm) with mercury content exceeding 13 mg per lamp. |
31.12.2018 |
6a. Cold cathode fluorescent lamps (CCFL) and external electrode fluorescent lamps (EEFL) of all lengths for electronic displays, that are not included in entry 6. |
31.12.2025 |
7. Cosmetics with mercury and mercury compounds, except those special cases included in entries 16 and 17 of Annex V to Regulation (EC) No 1223/2009 of the European Parliament and of the Council (1). |
31.12.2020 |
8. Pesticides, biocides and topical antiseptics. |
31.12.2020 |
9. The following non-electronic measuring devices: (a) barometers; (b) hygrometers; (c) manometers; (d) thermometers and other non-electrical thermometric applications; (e) sphygmomanometers; (f) strain gauges to be used with plethysmographs; (g) mercury pycnometers; (h) mercury metering devices for determination of the softening point. This entry does not cover the following measuring devices: — non-electronic measuring devices installed in large-scale equipment or those used for high precision measurement where no suitable mercury-free alternative is available; — measuring devices more than 50 years old on 3 October 2007; — measuring devices which are to be displayed in public exhibitions for cultural and historical purposes. |
31.12.2020 |
10. The following electrical and electronic measuring devices except those installed in large-scale equipment or those used for high precision measurement where no suitable mercury-free alternative is available: (a) melt pressure transducers; (b) melt pressure transmitters; (c) melt pressure sensors. |
31.12.2025 |
11. Other mercury-added products: (a) Mercury vacuum pumps; (b) Tyre balancers and wheel weights; (c) Photographic film and paper; (d) Propellant for satellites and spacecraft. |
31.12.2025 |
(1)
Regulation (EC) No 1223/2009 of the European Parliament and of the Council of 30 November 2009 on cosmetic products (OJ L 342, 22.12.2009, p. 59). |
Part B — Additional products excluded from the list in Part A of this Annex
Switches and relays, cold cathode fluorescent lamps and external electrode fluorescent lamps (CCFLs and EEFLs) for electronic displays and measuring devices, when they are used to replace a component of larger equipment and provided that no feasible mercury-free alternative for that component is available, in accordance with Directive 2000/53/EC of the European Parliament and of the Council ( 5 ) and Directive 2011/65/EU.
ANNEX III
Mercury-related requirements applicable to manufacturing processes referred to in Article 7(1) and (2)
Part I: Prohibited use of mercury or mercury compounds, whether in pure form or in mixtures, in manufacturing processes
from 1 January 2018: manufacturing processes in which mercury or mercury compounds are used as a catalyst;
by way of derogation from point (a), the production of vinyl chloride monomer shall be prohibited from 1 January 2022;
from 1 January 2022: manufacturing processes in which mercury is used as an electrode;
by way of derogation from point (c), from 11 December 2017: chlor-alkali production in which mercury is used as an electrode;
by way of derogation from point (c), the production of sodium or potassium methylate or ethylate shall be prohibited from 1 January 2028;
from 1 January 2018: the production of polyurethane, to the extent not already restricted or prohibited in accordance with entry 62 of Annex XVII to Regulation (EC) No 1907/2006.
Part II: Manufacturing processes subject to restrictions on use and releases of mercury and mercury compounds
Production of sodium or potassium methylate or ethylate
The production of sodium or potassium methylate or ethylate shall be carried out in accordance with point (e) of Part I and subject to the following conditions:
no use of mercury from primary mercury mining;
reduction of direct and indirect release of mercury and of mercury compounds into air, water and land in terms of per unit production by 50 % by 2020 as compared to 2010;
supporting research and development in respect of mercury-free manufacturing processes; and
as from 13 June 2017, the capacity of installations using mercury and mercury compounds for the production of sodium or potassium methylate or ethylate that were in operation before that date shall not be increased and no new installations shall be allowed.
ANNEX IV
Content of the national plan on artisanal and small-scale gold mining and processing referred to in Article 9
The national plan shall include the following information:
national objectives and reduction targets to eliminate the use of mercury and mercury compounds;
actions to eliminate:
whole ore amalgamation;
open burning of amalgam or processed amalgam;
burning of amalgam in residential areas; and
cyanide leaching in sediment, ore or tailings to which mercury has been added without first removing the mercury;
steps to facilitate the formalization or regulation of the artisanal and small-scale gold mining and processing sector;
baseline estimates of the quantities of mercury used and the practices employed in artisanal and small-scale gold mining and processing within its territory;
strategies for promoting the reduction of emissions and releases of, and exposure to, mercury in artisanal and small-scale gold mining and processing, including mercury-free methods;
strategies for managing trade and preventing the diversion of mercury and mercury compounds from both foreign and domestic sources to use in artisanal and small-scale gold mining and processing;
strategies for involving stakeholders in the implementation and continuing development of the national plan;
a public health strategy on the exposure of artisanal and small-scale gold miners and their communities to mercury which shall include, inter alia, the gathering of health data, training for health-care workers and awareness-raising through health facilities;
strategies to prevent the exposure of vulnerable populations, particularly children and women of child-bearing age, especially pregnant women, to mercury used in artisanal and small-scale gold mining and processing;
strategies for providing information to artisanal and small-scale gold miners and affected communities; and
a schedule for the implementation of the national plan.
ANNEX V
Correlation table
Regulation (EC) No 1102/2008 |
This Regulation |
Article 1(1) |
Article 3(1) and (2) |
Article 1(2) |
Article 3(3) |
Article 1(3) |
Article 3(4) |
Article 2 |
Article 11 |
Article 3(1)(a) |
Article 13(3)(a) |
Article 3(1)(b) |
Article 13(1) |
Article 3(1), second subparagraph |
Article 13(1), first subparagraph and Article 13(3), third subparagraph |
Article 3(2) |
— |
Article 4(1) |
Article 13(1) |
Article 4(2) |
Article 13(1) |
Article 4(3) |
— |
Article 5(1) |
— |
Article 5(2) |
— |
Article 5(3) |
— |
Article 6(1)(a) |
— |
Article 6(1)(b) |
Article 12(1)(a) |
Article 6(1)(c) |
Article 12(1)(b) and (c) |
Article 6(2)(a) |
Article 12(1)(a) |
Article 6(2)(b) |
Article 12(1)(b) and (c) |
Article 6(3) |
Article 12(1) |
Article 6(4) |
— |
Article 7 |
Article 16 |
Article 8(1) |
— |
Article 8(2) |
— |
Article 8(3) |
— |
Article 8(4) |
— |
Article 8(5) |
— |
Article 9 |
— |
( 1 ) Directive 2012/18/EU of the European Parliament and of the Council of 4 July 2012 on the control of major-accident hazards involving dangerous substances, amending and subsequently repealing Council Directive 96/82/EC (OJ L 197, 24.7.2012, p. 1).
( 2 ) Directive 2011/65/EU of the European Parliament and of the Council of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (OJ L 174, 1.7.2011, p. 88).
( 3 ) Regulation (EC) No 2150/2002 of the European Parliament and of the Council of 25 November 2002 on waste statistics (OJ L 332, 9.12.2002, p. 1).
( 4 ) Directive 2003/4/EC of the European Parliament and of the Council of 28 January 2003 on public access to environmental information and repealing Council Directive 90/313/EEC (OJ L 41, 14.2.2003, p. 26).
( 5 ) Directive 2000/53/EC of the European Parliament and of the Council of 18 September 2000 on end-of life vehicles (OJ L 269, 21.10.2000, p. 34).