Choose the experimental features you want to try

This document is an excerpt from the EUR-Lex website

Document 02013R1387-20160101

    Consolidated text: Council Regulation (EU) No 1387/2013 of 17 December 2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products and repealing Regulation (EU) No 1344/2011

    ELI: http://data.europa.eu/eli/reg/2013/1387/2016-01-01

    2013R1387 — EN — 01.01.2016 — 004.001


    This document is meant purely as a documentation tool and the institutions do not assume any liability for its contents

    ►B

    COUNCIL REGULATION (EU) No 1387/2013

    of 17 December 2013

    suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products and repealing Regulation (EU) No 1344/2011

    (OJ L 354 28.12.2013, p. 201)

    Amended by:

     

     

    Official Journal

      No

    page

    date

     M1

    COUNCIL REGULATION (EU) No 722/2014 of 24 June 2014

      L 192

    9

    1.7.2014

     M2

    COUNCIL REGULATION (EU) No 1341/2014 of 15 December 2014

      L 363

    10

    18.12.2014

    ►M3

    COUNCIL REGULATION (EU) 2015/982 of 23 June 2015

      L 159

    5

    25.6.2015

    ►M4

    COUNCIL REGULATION (EU) 2015/2449 of 14 December 2015

      L 345

    11

    30.12.2015


    Corrected by:

     C1

    Corrigendum, OJ L 293, 9.10.2014, p.  57 (1387/2013)

     C2

    Corrigendum, OJ L 293, 9.10.2014, p.  58 (722/2014)




    ▼B

    COUNCIL REGULATION (EU) No 1387/2013

    of 17 December 2013

    suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products and repealing Regulation (EU) No 1344/2011



    THE COUNCIL OF THE EUROPEAN UNION,

    Having regard to the Treaty on the Functioning of the European Union, and in particular Article 31 thereof,

    Having regard to the proposal from the European Commission,

    Whereas:

    (1)

    The Union production of the agricultural and industrial products set out in Annex I is currently inadequate or non-existent, and thus the needs of user industries in the Union cannot be met.

    (2)

    It is therefore in the interests of the Union to suspend partially or totally the autonomous Common Customs Tariff duties for those products.

    (3)

    Council Regulation (EU) No 1344/2011 ( 1 ) has been amended many times. In addition, following its amendment by Council Regulation (EU) No 1220/2012 ( 2 ), fishery products were removed from the scope of Regulation (EU) No 1344/2011. In the interest of transparency, Regulation (EU) No 1344/2011 should therefore be replaced in its entirety.

    (4)

    Regulations suspending the autonomous Common Customs Tariff duties on certain industrial and agricultural products have renewed previous measures to a great extent. Therefore, in the interests of rationalising the implementation of the measures concerned, it is appropriate not to limit the period of validity of this Regulation, as its scope can be adapted and products can be added to or removed from Annex I to this Regulation by means of a Council Regulation.

    (5)

    In view of their temporary nature, the suspensions listed in Annex I to this Regulation should be reviewed systematically, and at the latest five years after their date of application or renewal. Moreover, it might be necessary at any time to close certain suspensions, following a proposal of the Commission on the basis of a review carried out on its own initiative or at the request of one or more Member States if it is no longer in the Union's interest to maintain the suspensions or due to technical product developments, changed circumstances or economic trends on the market.

    (6)

    Statistics for certain products listed in Annex I to this Regulation are frequently expressed in pieces, square meters or measurement units other than weight. However, there are no such supplementary units in the Combined Nomenclature laid down in Annex I to Council Regulation (EEC) No 2658/87 ( 3 ). It is therefore necessary to provide that not only the weight in kilograms or tonnes, but also the relevant supplementary units for the imports of the products concerned, are entered in the declaration for release for free circulation.

    (7)

    Since the suspensions laid down in this Regulation must take effect on 1 January 2014, this Regulation should enter into force immediately upon its publication in the Official Journal of the European Union and should apply from 1 January 2014.

    (8)

    In accordance with the principle of proportionality, it is necessary and appropriate for the achievement of the basic objectives of improving the competitive capacity of the Union industry, thereby enabling that industry to maintain or create employment and modernise its structures, to lay down rules on the suspension of the Common Customs Tariff duties for the products set out in Annex I. In accordance with Article 5(4) of the Treaty on European Union, this Regulation does not go beyond what is necessary to achieve the objectives pursued,

    HAS ADOPTED THIS REGULATION:



    ▼M3

    Article 1

    1.  The autonomous Common Customs Tariff duties for the agricultural and industrial products listed in ►M4  the Annex ◄ are hereby suspended.

    2.  Paragraph 1 does not apply to any mixtures, preparations or products made up of different components containing products listed in ►M4  the Annex ◄ .

    ▼B

    Article 2

    1.  The Commission may at any time review the suspensions for the products listed in ►M4  the Annex ◄ in the following cases:

    (a) at its own initiative;

    (b) at the request of Member States.

    ▼M4

    2.  The Commission shall review the suspensions for products listed in the Annex during the year preceding the end date for mandatory review provided for in that Annex.

    Article 3

    Where a declaration for release for free circulation is presented for the products in relation to which the supplementary units have been provided in the Annex, the exact quantity of the products imported shall be entered in ‘Box 41: Supplementary units’ of that declaration using the measurement unit set out in the Annex.

    ▼B

    Article 4

    Regulation (EU) No 1344/2011 is hereby repealed.

    Article 5

    This Regulation shall enter into force on the day of its publication in the Official Journal of the European Union.

    It shall apply from 1 January 2014.

    This Regulation shall be binding in its entirety and directly applicable in all Member States.

    ▼M4




    ANNEX



    CN code

    TARIC

    Description

    Rate of autonomous duty

    Supplementary Unit

    End date for mandatory review

     (7)ex 0709 59 10

    10

    Fresh or chilled chanterelles for treatment other than simple repacking for retail sale (1) (2)

    0 %

    -

    31.12.2020

    ex 0710 21 00

    10

    Peas in pods, of the species Pisum sativum of the variety Hortense axiphium, frozen, of a thickness of not more than 6 mm, to be used, in their pods, in the manufacture of prepared meals (1) (2)

    0 %

    -

    31.12.2018

    ex 0710 80 95

    50

    Bamboo shoots, frozen, not put up for retail sale

    0 %

    -

    31.12.2018

    ex 0711 59 00

    11

    Mushrooms, excluding mushrooms of the genera Agaricus, Calocybe, Clitocybe, Lepista, Leucoagaricus, Leucopaxillus, Lyophyllum and Tricholoma, provisionally preserved in brine, in sulphur water, or in other preservative solutions, but unsuitable in that state for immediate consumption, for the food-canning industry (1)

    0 %

    -

    31.12.2016

    ex 0712 32 00

    ex 0712 33 00

    ex 0712 39 00

    10

    10

    31

    Mushrooms, excluding mushrooms of the genus Agaricus, dried, whole or in identifiable slices or pieces, for treatment other than simple repacking for retail sale (1) (2)

    0 %

    -

    31.12.2018

    ex 0804 10 00

    30

    Dates, fresh or dried, for use in the manufacture (excluding packing) of products of drink or food industries (1)

    0 %

    -

    31.12.2018

    ex 0810 40 50

    10

    Cranberries of the species Vaccinium macrocarpon, fresh, for use in the manufacture (excluding packing) of products of drink or food industries (1)

    0 %

    -

    31.12.2018

    0811 90 50

    0811 90 70

    ex 0811 90 95

    70

    Fruit of the genus Vaccinium, uncooked or cooked by steaming or boiling in water, frozen, not containing added sugar or other sweetening matter

    0 %

    -

    31.12.2018

    ex 0811 90 95

    20

    Boysenberries, frozen, not containing added sugar, not put up for retail sale

    0 %

    -

    31.12.2018

    ex 0811 90 95

    30

    Pineapple (Ananas comosus), in pieces, frozen

    0 %

    -

    31.12.2018

    ex 0811 90 95

    40

    Rose-hips, uncooked or cooked by steaming or boiling in water, frozen, not containing added sugar or other sweetening matter

    0 %

    -

    31.12.2018

     (7)ex 1511 90 19

    ex 1511 90 91

    ex 1513 11 10

    ex 1513 19 30

    ex 1513 21 10

    ex 1513 29 30

    20

    20

    20

    20

    20

    20

    Palm oil, coconut (copra) oil, palm kernel oil, for the manufacture of:

    — industrial monocarboxylic fatty acids of subheading 3823 19 10 ,

    — methyl esters of fatty acids of heading 2915 or 2916 ,

    — fatty alcohols of subheadings 2905 17 , 2905 19 and 3823 70 used for the manufacture of cosmetics, washing products or pharmaceutical products,

    — fatty alcohols of subheading 2905 16 , pure or mixed, used for the manufacture of cosmetics, washing products or pharmaceutical products,

    — stearic acid of subheading 3823 11 00 ,

    — goods of heading 3401 , or

    — fatty acids with high purity of heading 2915  (1)

    0 %

    -

    31.12.2016

    ex 1515 90 99

    92

    Vegetable oil, refined, containing by weight 35 % or more but not more than 50 % of arachidonic acid or 35 % or more but not more than 50 % of docosahexaenoic acid

    0 %

    -

    31.12.2018

    ex 1516 20 96

    20

    Jojoba oil, hydrogenated and interesterified, without any further chemical modification and not subjected to any texturisation process

    0 %

    -

    31.12.2019

     (7)ex 1517 90 99

    10

    Vegetable oil, refined, containing by weight 25 % or more but not more than 50 % arachidonic acid or 12 % or more but not more than 65 % docosahexaenoic acid and standardized with high oleic sunflower oil (HOSO)

    0 %

    -

    31.12.2016

    ex 1901 90 99

    ex 2106 90 98

    39

    45

    Preparation in powder form containing by weight:

    — 15 % or more but not more than 35 % of wheat derived Maltodextrin,

    — 15 % or more but not more than 35 % of whey (milk serum),

    — 10 % or more but not more than 30 % of refined, bleached, deodorised and non-hydrogenated sunflower oil,

    — 10 % or more but not more than 30 % of blended, aged spray dried cheese,

    — 5 % or more but not more than 15 % of buttermilk, and

    — 0,1 % or more but not more than 10 % of sodium caseinate, disodium phosphate, lactic acid

    0 %

    -

    31.12.2018

    ex 1902 30 10

    ex 1903 00 00

    10

    20

    Transparent noodles, cut in pieces, obtained from beans (Vigna radiata (L.) Wilczek), not put up for retail sale

    0 %

    -

    31.12.2018

    ex 2005 91 00

    10

    Bamboo shoots, prepared or preserved, in immediate packings of a net content of more than 5 kg

    0 %

    -

    31.12.2018

    ex 2007 99 50

    ex 2007 99 50

    81

    91

    Acerola puree concentrate, obtained by cooking:

    — of the Genus Malpighia spp.,

    — with a sugar content by weight of more than 13 % but not more than 30 %

    for use in the manufacture of products of food and drink industry (1)

    9% (3)

    -

    31.12.2017

    ex 2007 99 50

    ex 2007 99 50

    82

    92

    Acidified banana puree concentrate, obtained by cooking:

    — of the Genus Musa cavendish,

    — with a sugar content by weight of more than 13 % but not more than 30 %

    for use in the manufacture of products of food and drink industry (1)

    11,5% (3)

    -

    31.12.2017

    ex 2007 99 50

    ex 2007 99 50

    ex 2007 99 93

    83

    93

    10

    Mango puree concentrate, obtained by cooking:

    — of the Genus Mangifera spp.,

    — with a sugar content by weight of not more than 30 %

    for use in the manufacture of products of food and drink industry (1)

    6% (3)

    -

    31.12.2017

    ex 2007 99 50

    ex 2007 99 50

    84

    94

    Papaya puree concentrate, obtained by cooking:

    — of the Genus Carica spp.,

    — with a sugar content by weight of more than 13 % but not more than 30 %

    for use in the manufacture of products of food and drink industry (1)

    7,8% (3)

    -

    31.12.2017

    ex 2007 99 50

    ex 2007 99 50

    85

    95

    Guava puree concentrate, obtained by cooking:

    — of the Genus Psidium spp.,

    — with a sugar content by weight of more than 13 % but not more than 30 %

    for use in the manufacture of products of food and drink industry (1)

    6% (3)

    -

    31.12.2017

    ex 2008 93 91

    20

    Sweetened dried cranberries, excluding packing alone as processing, for the manufacture of products of food processing industries (4)

    0 %

    -

    31.12.2017

     (7)ex 2008 99 48

    94

    Mango puree:

    — not from concentrate,

    — of the genus Mangifera,

    — of a Brix value of 14 or more, but not more than 20

    used in the manufacture of products of drink industry (1)

    6%

    -

    31.12.2020

    ex 2008 99 49

    ex 2008 99 99

    30

    40

    Seedless boysenberry puree not containing added spirit, whether or not containing added sugar

    0 %

    -

    31.12.2019

    ex 2008 99 49

    ex 2008 99 99

    70

    11

    Blanched vine leaves of the genus Karakishmish, in brine, containing by weight:

    — more than 6 % of salt concentration,

    — 0,1 % or more but not more than 1,4 % of acidity expressed as citric acid monohydrate, and

    — whether or not but not more than 2 000 mg/kg of sodium benzoate according CODEX STAN 192-1995

    for use in the manufacture of stuffed vine leaves with rice (1)

    0 %

    -

    31.12.2017

     (7)ex 2008 99 91

    10

    Chinese water chestnuts (Eleocharis dulcis or Eleocharis tuberosa) peeled, washed, blanched, cooled and individually quick-frozen for use in the manufacture of products of food industry for treatment other than simple repacking (1) (2)

    0 % (3)

    -

    31.12.2020

     (7)ex 2009 41 92

    ex 2009 41 99

    20

    70

    Pineapple juice:

    — not from concentrate,

    — of the genus Ananas,

    — of a Brix value of 11 or more but not more than 16,

    used in the manufacture of products of drink industry (1)

    8%

    -

    31.12.2020

    ex 2009 49 30

    91

    Pineapple juice, other than in powder form:

    — with a Brix value of more than 20 but not more than 67,

    — a value of more than EUR 30 per 100 kg net weight,

    — containing added sugar

    used in the manufacture of products of food or drink industry (1)

    0 %

    -

    31.12.2019

    ex 2009 81 31

    10

    Cranberry juice concentrate:

    — of a Brix value of 40 or more but not more than 66,

    — in immediate packings of a content of 50 litres or more

    0 %

    -

    31.12.2019

    ex 2009 89 73

    ex 2009 89 73

    11

    13

    Passion fruit juice and passion fruit juice concentrate, whether or not frozen:

    — with a Brix value of 13,7 or more but not more than 55,

    — of a value of more than EUR 30 per 100 kg net weight,

    — in immediate packings of a content of 50 litres or more, and

    — with added sugar

    for the use in the manufacture of products of food or drink industry (1)

    0 %

    -

    31.12.2019

    ex 2009 89 79

    20

    Frozen boysenberry juice concentrate with a Brix value of 61 or more, but not more than 67, in immediate packing of a content of 50 litres or more

    0 %

    -

    31.12.2016

    ex 2009 89 79

    30

    Frozen acerola juice concentrate:

    — with a Brix value of more than 48 but not more than 67,

    — in immediate packings of a content of 50 litres or more

    0 %

    -

    31.12.2018

    ex 2009 89 79

    85

    Acai berry juice concentrate:

    — of the species Euterpe oleracea,

    — frozen,

    — not sweetened,

    — not in powder form,

    — of a Brix value of 23 or more but not more than 32,

    in immediate packings of a content of 10 kg or more

    0 %

    -

    31.12.2016

    ex 2009 89 97

    ex 2009 89 97

    21

    29

    Passion fruit juice and passion fruit juice concentrate, whether or not frozen:

    — with a Brix value of 10 or more but not more than 13,7,

    — of a value of more than EUR 30 per 100 kg net weight,

    — in immediate packings of a content of 50 litres or more, and

    — without added sugar

    for the use in the manufacture of products of food or drink industry (1)

    0 %

    -

    31.12.2019

    ex 2009 89 99

    94

    Coconut water

    — unfermented,

    — not containing added spirit or sugar, and

    — in immediate packing of a content of 50 litres or more (2)

    0 %

    -

    31.12.2016

    ex 2106 10 20

    10

    Soya protein isolate, containing by weight 6,6 % or more but not more than 8,6 % of calcium phosphate

    0 %

    -

    31.12.2018

    ex 2106 10 20

    20

    Soya protein concentrate having a protein content by weight, calculated on a dry weight basis, of 65 % or more but not more than 90 % in powder or textured form

    0 %

    -

    31.12.2018

    ex 2106 90 92

    45

    Preparation containing by weight:

    — more than 30 % but not more than 35 % licorice extract,

    — more than 65 % but not more than 70 % tricaprylin,

    standardized by weight to 3 % or more but not more than 4 % glabridin

    0 %

    -

    31.12.2016

    ex 2519 90 10

    10

    Fused magnesia with a purity by weight of 97 % or more

    0 %

    -

    31.12.2016

    ex 2707 50 00

    ex 2707 99 80

    20

    10

    Mixture of xylenol-isomers and ethyl phenol-isomers, with a total xylenol content by weight of 62 % or more but less than 95 %

    0 %

    -

    31.12.2019

    ex 2707 99 99

    10

    Heavy and medium oils, whose aromatic content exceeds their non-aromatic content, for use as refinery feedstock to undergo one of the specific processes described in Additional note 5 to Chapter 27 (1)

    0 %

    -

    31.12.2018

     (7)ex 2710 19 81

    ex 2710 19 99

    10

    30

    Catalytically hydroisomerized and dewaxed base oil of hydrogenated, highly isoparaffinic hydrocarbons, containing:

    — 90 % or more by weight of saturates, and

    — not more than 0,03 % by weight of sulphur,

    with a viscosity index of 80 or more

    0 %

    -

    31.12.2018

     (7)ex 2710 19 99

    20

    Catalytic de-waxed base oil, synthesised from gaseous hydrocarbons, followed by a heavy paraffin conversion process (HPC), containing:

    — not more than 1 mg/kg of sulphur

    — more than 99 % by weight of saturated hydrocarbons

    — more than 75 % by weight of n- and iso-paraffinic hydrocarbons with a carbon chain length of 18 or more but not more than 50; and

    — a kinematic viscosity at 40 °C of more than 6,5 mm2/s, or

    — a kinematic viscosity at 40 °C of more than 11 mm2/s with a viscosity index of 120 or more

    0 %

    -

    31.12.2019

    ex 2804 50 90

    10

    Tellurium of a purity by weight of 99,99 % or more, but not more than 99,999 % (CAS RN 13494-80-9)

    0 %

    -

    31.12.2018

    2804 70 00

     

    Phosphorus

    0 %

    -

    31.12.2018

     (7)ex 2805 12 00

    10

    Calcium with a purity of 98 % or more by weight, in powder or wire form (CAS RN 7440-70-2)

    0 %

    -

    31.12.2020

    ex 2805 19 90

    10

    Lithium metal of a purity by weight of 99,7 % or more (CAS RN 7439-93-2)

    0 %

    -

    31.12.2017

    ex 2805 30 10

    10

    Alloy of cerium and other rare-earth metals, containing by weight 47 % or more of cerium

    0 %

    -

    31.12.2018

     (7)2805 30 20

    2805 30 30

    2805 30 40

     

    Rare-earth metals, scandium and yttrium, of a purity by weight of 95 % or more

    0 %

    -

    31.12.2020

    ex 2811 19 80

    10

    Sulphamidic acid (CAS RN 5329-14-6)

    0 %

    -

    31.12.2018

    ex 2811 19 80

    20

    Hydrogen iodide (CAS RN 10034-85-2)

    0 %

    -

    31.12.2016

    ex 2811 19 80

    30

    Phosphorous acid (CAS RN 10294-56-1)/phosphonic acid (CAS RN 13598-36-2) used as an ingredient for production of additives used in poly(vinyl chloride) industry (1)

    0 %

    -

    31.12.2017

    ex 2811 22 00

    10

    Silicon dioxide (CAS RN 7631-86-9) in the form of powder, for use in the manufacture of high performance liquid chromatography columns (HPLC) and sample preparation cartridges (1)

    0 %

    -

    31.12.2018

    ex 2811 22 00

    30

    Balls of porous white silica of a particle size of more than 1 μm for use in the manufacture of cosmetic products (1)

    0 %

    -

    31.12.2016

     (7)ex 2811 22 00

    60

    Calcined amorphous silicon dioxide powder

    — with a particle size of not more than 20 μm, and

    — of a kind used in the production of polyethylene

    0 %

    -

    31.12.2019

    ex 2812 90 00

    10

    Nitrogen trifluoride (CAS RN 7783-54-2)

    0 %

    -

    31.12.2018

    ex 2816 40 00

    10

    Barium hydroxide (CAS RN 17194-00-2)

    0 %

    -

    31.12.2017

     (7)ex 2818 10 91

    20

    Sintered corundum with a micro crystalline structure, consisting of aluminium oxide (CAS RN 1344-28-1), magnesium aluminate (CAS RN 12068-51-8) and the rare earth aluminates of yttrium, lanthanum, and neodymium, with a content by weight (calculated as oxides) of:

    — 94 % or more, but less than 98,5 % of aluminium oxide,

    — 2 % (± 1,5 %) of magnesium oxide,

    — 1 % (± 0,6 %) of yttrium oxide,

    — and

    — either 2 % (± 1,2 %) of lanthanum oxide, or

    — 2 % (± 1,2 %) of lanthanum oxide and neodymium oxide,

    with less than 50 % of the total weight having a particle size of more than 10 mm

    0 %

    -

    31.12.2020

    ex 2818 20 00

    10

    Activated alumina with a specific surface area of at least 350 m2/g

    0 %

    -

    31.12.2019

    ex 2818 30 00

    10

    Aluminium hydroxide oxide in the form of pseudo-boehmite

    4%

    -

    31.12.2018

    ex 2819 90 90

    10

    Dichromium trioxide for use in metallurgy (CAS RN 1308-38-9) (1)

    0 %

    -

    31.12.2016

    ex 2823 00 00

    10

    Titanium dioxide (CAS RN 13463-67-7):

    — of a purity by weight of 99,9 % or more,

    — with an average grain-size of 0,7 μm or more but not more than 2,1 μm

    0 %

    -

    31.12.2017

    ex 2823 00 00

    20

    Titanium dioxide (CAS RN 13463-67-7) with a purity of 99,7 % or more and containing by weight:

    — not more than 0,005 % of potassium and sodium combined (expressed as elemental sodium and elemental potassium),

    — not more than 0,01 % of phosphorus (expressed as elemental phosphorus),

    for use in the metallurgy (1)

    0 %

    -

    31.12.2017

    ex 2825 10 00

    10

    Hydroxylammonium chloride (CAS RN 5470-11-1)

    0 %

    -

    31.12.2017

    ex 2825 50 00

    20

    Copper (I or II) oxide containing by weight 78 % or more of copper and not more than 0,03 % of chloride

    0 %

    -

    31.12.2018

    ex 2825 60 00

    10

    Zirconium dioxide (CAS RN 1314-23-4)

    0 %

    -

    31.12.2017

     (7)ex 2826 19 90

    10

    Tungsten hexafluoride with a purity by weight of 99,9 % or more (CAS RN 7783-82-6)

    0 %

    -

    31.12.2020

    ex 2826 90 80

    15

    Lithium hexafluorophosphate (CAS RN 21324-40-3)

    0 %

    -

    31.12.2016

    ex 2827 39 85

    10

    Copper monochloride of a purity by weight of 96 % or more but not more than 99 % (CAS RN 7758-89-6)

    0 %

    -

    31.12.2018

    ex 2827 39 85

    20

    Antimony pentachloride of a purity by weight of 99 % or more (CAS RN 7647-18-9)

    0 %

    -

    31.12.2016

    ex 2827 39 85

    40

    Barium chloride dihydrate (CAS RN 10326-27-9)

    0 %

    -

    31.12.2018

    ex 2827 49 90

    10

    Hydrated zirconium dichloride oxide

    0 %

    -

    31.12.2018

    ex 2827 60 00

    10

    Sodium iodide (CAS RN 7681-82-5)

    0 %

    -

    31.12.2019

    ex 2830 10 00

    10

    Disodium tetrasulphide, containing by weight 38 % or less of sodium calculated on the dry weight

    0 %

    -

    31.12.2018

    ex 2833 29 80

    20

    Manganese sulphate monohydrate (CAS RN 10034-96-5)

    0 %

    -

    31.12.2018

     (7)ex 2833 29 80

    30

    Zirconium sulphate (CAS RN 14644-61-2)

    0 %

    -

    31.12.2020

    ex 2835 10 00

    10

    Sodium hypophosphite monohydrate (CAS RN 10039-56-2)

    0 %

    -

    31.12.2017

    ex 2835 10 00

    20

    Sodium hypophosphite (CAS RN 7681-53-0)

    0 %

    -

    31.12.2018

    ex 2836 91 00

    20

    Lithium carbonate, containing one or more of the following impurities at the concentrations indicated:

    — 2 mg/kg or more of arsenic,

    — 200 mg/kg or more of calcium,

    — 200 mg/kg or more of chlorides,

    — 20 mg/kg or more of iron,

    — 150 mg/kg or more of magnesium,

    — 20 mg/kg or more of heavy metals,

    — 300 mg/kg or more of potassium,

    — 300 mg/kg or more of sodium,

    — 200 mg/kg or more of sulphates,

    determined according to the methods specified in the European Pharmacopœia

    0 %

    -

    31.12.2018

    ex 2836 99 17

    20

    Zirconium (IV) basic carbonate (CAS RN 57219-64-4)

    0 %

    -

    31.12.2018

    ex 2837 19 00

    20

    Copper cyanide (CAS RN 544-92-3)

    0 %

    -

    31.12.2018

    ex 2837 20 00

    10

    Tetrasodium hexacyanoferrate (II) (CAS RN 13601-19-9)

    0 %

    -

    31.12.2016

    ex 2837 20 00

    20

    Ammonium iron (III) hexacyanoferrate (II) (CAS RN 25869-00-5)

    0 %

    -

    31.12.2017

    ex 2839 19 00

    10

    Disodium disilicate (CAS RN 13870-28-5)

    0 %

    -

    31.12.2017

    ex 2839 90 00

    20

    Calcium silicate (CAS RN 1344-95-2)

    0 %

    -

    31.12.2018

     (7)ex 2840 20 90

    10

    Zinc borate (CAS RN 12767-90-7)

    0 %

    -

    31.12.2020

    2841 30 00

     

    Sodium dichromate (CAS RN 10588-01-9)

    0 %

    -

    31.12.2018

    ex 2841 70 00

    10

    Diammonium tetraoxomolybdate(2-) (CAS RN 13106-76-8)

    0 %

    -

    31.12.2018

    ex 2841 70 00

    20

    Diammonium tridecaoxotetramolybdate(2-) (CAS RN 12207-64-6)

    0 %

    -

    31.12.2019

    ex 2841 70 00

    30

    Hexaammonium heptamolybdate, anhydrous (CAS RN 12027-67-7) or as tetrahydrate (CAS RN 12054-85-2)

    0 %

    -

    31.12.2019

    ex 2841 80 00

    10

    Diammonium wolframate (ammonium paratungstate) (CAS RN 11120-25-5)

    0 %

    -

    31.12.2017

    ex 2841 90 85

    10

    Lithium cobalt(III) oxide with a cobalt content of at least 59 % (CAS RN 12190-79-3)

    0 %

    -

    31.12.2017

    ex 2841 90 85

    20

    Potassium titanium oxide in powder form with a purity of 99 % or more (CAS RN 12056-51-8)

    0 %

    -

    31.12.2018

    ex 2842 10 00

    10

    Synthetic Beta Zeolite powder

    0 %

    -

    31.12.2018

    ex 2842 10 00

    20

    Synthetic chabasite zeolite powder

    0 %

    -

    31.12.2019

    ex 2842 90 10

    10

    Sodium selenate (CAS RN 13410-01-0)

    0 %

    -

    31.12.2019

    ex 2843 29 00

    10

    Silver oxide, nitrate- and carbonate-free, with a silver content of at least 99,99 % by weight of the metal content, for the manufacture of silver oxide batteries (1)

    0 %

    -

    31.12.2016

    2845 10 00

     

    Heavy water (deuterium oxide) (Euratom) (CAS RN 7789-20-0)

    0 %

    -

    31.12.2018

    2845 90 10

     

    Deuterium and compounds thereof; hydrogen and compounds thereof, enriched in deuterium; mixtures and solutions containing these products (Euratom)

    0 %

    -

    31.12.2018

    ex 2845 90 90

    10

    Helium-3 (CAS RN 14762-55-1)

    0 %

    -

    31.12.2016

    ex 2845 90 90

    20

    Water enriched at a level of 95 % or more by weight with oxygen-18 (CAS RN 14314-42-2)

    0 %

    -

    31.12.2018

    ex 2845 90 90

    30

    (13C)Carbon monoxide (CAS RN 1641-69-6)

    0 %

    -

    31.12.2016

    ex 2845 90 90

    40

    Iron boride enriched at a level of more than 95 % by weight with boron-10 (CAS RN 200513-39-9)

    0 %

    -

    31.12.2018

    ex 2846 10 00

    ex 3824 90 96

    10

    53

    Rare-earth concentrate containing by weight 60 % or more but not more than 95 % of rare-earth oxides and not more than 1 % each of zirconium oxide, aluminium oxide or iron oxide, and having a loss on ignition of 5 % or more by weight

    0 %

    -

    31.12.2018

    ex 2846 10 00

    20

    Dicerium tricarbonate, whether or not hydrated (CAS RN 537-01-9)

    0 %

    -

    31.12.2018

    ex 2846 10 00

    30

    Cerium lanthanum carbonate, whether or not hydrated

    0 %

    -

    31.12.2018

     (7)2846 90 10

    2846 90 20

    2846 90 30

    2846 90 90

     

    Compounds, inorganic or organic, of rare-earth metals, of yttrium or of scandium or of mixtures of these metals, other than those of subheading 2846 10 00

    0 %

    -

    31.12.2018

    ex 2848 00 00

    10

    Phosphine (CAS RN 7803-51-2)

    0 %

    -

    31.12.2018

    ex 2850 00 20

    10

    Silane (CAS RN 7803-62-5)

    0 %

    -

    31.12.2018

    ex 2850 00 20

    20

    Arsine (CAS RN 7784-42-1)

    0 %

    -

    31.12.2018

    ex 2850 00 20

    30

    Titanium nitride with a particle size of not more than 250 nm (CAS RN 25583-20-4)

    0 %

    -

    31.12.2017

    ex 2850 00 20

    40

    Germanium tetrahydride (CAS RN 7782-65-2)

    0 %

    -

    31.12.2016

    ex 2850 00 20

    50

    Sodium tetrahydroborate (CAS 16940-66-2) with:

    — a purity by weight of 98 % or more, and

    — not more than 10ppm iron

    for use as an additive in the manufacture of oxygen barrier polymer articles (1)

    0 %

    -

    31.12.2017

    ex 2850 00 60

    10

    Sodium azide (CAS RN 26628-22-8)

    0 %

    -

    31.12.2018

    ex 2853 00 90

    10

    Chlorosulphonyl isocyanate (CAS RN 1189-71-5)

    0 %

    -

    31.12.2016

    ex 2903 39 19

    10

    1-Bromo-2-methylpropane (CAS RN 78-77-3) with a purity not less than 99,0 % and containing not more than:

    — 0,25 % of Sec-butyl bromide

    — 0,06 % of n-butyl bromide

    — 0,06 % of n-propyl bromide

    0 %

    -

    31.12.2018

     (7)2903 39 21

     

    Difluoromethane (CAS RN 75-10-5)

    0 %

    -

    31.12.2020

     (7)ex 2903 39 24

    10

    Pentafluoroethane (CAS RN 354-33-6)

    0 %

    -

    31.12.2019

     (7)ex 2903 39 25

    10

    1,1-Difluoroethane (CAS RN 75-37-6)

    0 %

    -

    31.12.2018

     (7)ex 2903 39 26

    10

    1,1,1,2-Tetrafluoroethane feedstock for pharmaceutical grade production conforming to the following specification:

    — not more than 600 ppm by weight of R134 (1,1,2,2-tetrafluoroethane),

    — not more than 5 ppm by weight of R143a (1,1,1-trifluoroethane),

    — not more than 2 ppm by weight of R125 (pentafluoroethane),

    — not more than 100 ppm by weight of R124 (1-chloro-1,2,2,2-tetrafluoroethane),

    — not more than 30 ppm by weight of R114 (1,2-dichlorotetrafluoroethane),

    — not more than 50 ppm by weight of R114a (1,1-Dichlorotetrafluoroethane),

    — not more than 250 ppm by weight of R133a (1-Chloro-2,2,2-Trifluoroethane),

    — not more than 2 ppm by weight of R22 (Chlorodifluoromethane),

    — not more than 2 ppm by weight of R115 (Chloropentafluoroethane),

    — not more than 2 ppm by weight of R12 (Dichlorodifluoromethane),

    — not more than 20 ppm by weight of R40 (Methyl chloride),

    — not more than 20 ppm by weight of R245cb (1,1,1,2,2-pentafluoropropane),

    — not more than 20 ppm by weight of R12B1 (Chlorodifluorobromomethane),

    — not more than 20 ppm by weight of R32 (Difluoromethane),

    — not more than 15 ppm by weight of R31 (Chlorofluoromethane),

    — not more than 10 ppm by weight of R152a (1,1-Difluoroethane),

    — not more than 20 ppm by weight of 1131 (1-Chloro-2 Fluoroethylene),

    — not more than 20 ppm by weight of 1122 (1-Chloro-2,2-Difluoroethylene),

    — not more than 3 ppm by weight of 1234yf (2,3,3,3-Tetrafluoropropene),

    — not more than 3 ppm by weight of 1243zf (3,3,3 Trifluoropropene),

    — not more than 3 ppm by weight of 1122a (1-chloro-1,2-difluoroethylene),

    — not more than 4,5 ppm by weight of 1234yf+1122a+1243zf (2,3,3,3-tetrafluoropropene, +1-Chloro-1,2-Difluoroethylene+3,3,3-Trifluoropropene),

    — not more than 3 ppm by weight of any individual unspecified/unknown chemical,

    — not more than 10 ppm by weight of all unspecified/unknown chemicals combined,

    — not more than 10 ppm by weight of Water,

    — with an acidity level of not more than 0,1 ppm by weight,

    — without Halides,

    — not more than 0,01 % by volume of High Boilers,

    — without any odour (no malodour)

    for further purification to an inhalation grade of HFC 134a produced under GMP (Good Manufacturing Practice) for use in the manufacture of a propellant for medical aerosols whose contents are taken into the oral or nasal cavities, and/or the respiratory tract (CAS RN 811-97-2) (1)

    0 %

    -

    31.12.2019

     (7)ex 2903 39 27

    10

    1,1,1,3,3-Pentafluoropropane (CAS RN 460-73-1)

    0 %

    -

    31.12.2018

     (7)ex 2903 39 28

    10

    Carbon tetrafluoride (tetrafluoromethane) (CAS RN 75-73-0)

    0 %

    -

    31.12.2018

     (7)ex 2903 39 28

    20

    Perfluoroethane (CAS RN 76-16-4)

    0 %

    -

    31.12.2018

     (7)ex 2903 39 29

    10

    1H-Perfluorohexane (CAS RN 355-37-3)

    0 %

    -

    31.12.2018

     (7)2903 39 31

     

    2,3,3,3-Tetrafluoroprop-1-ene (2,3,3,3-tetrafluoropropene) (CAS RN 754-12-1)

    0 %

    -

    31.12.2017

     (7)ex 2903 39 35

    10

    Trans-1,3,3,3-tetrafluoroprop-1-ene (Trans-1,3,3,3-tetrafluoropropene) (CAS RN 1645-83-6)

    0 %

    -

    31.12.2018

     (7)ex 2903 39 39

    10

    Perfluoro(4-methyl-2-pentene) (CAS RN 84650-68-0)

    0 %

    -

    31.12.2016

     (7)ex 2903 39 39

    20

    (Perfluorobutyl) ethylene (CAS RN 19430-93-4)

    0 %

    -

    31.12.2018

     (7)ex 2903 39 39

    30

    Hexafluoropropene (CAS RN 116-15-4)

    0 %

    -

    31.12.2016

     (7)ex 2903 74 00

    10

    2-Chloro-1,1-difluoroethane (CAS RN 338-65-8)

    0 %

    -

    31.12.2020

     (7)ex 2903 77 60

    10

    1,1,1-Trichlorotrifluoroethane (CAS RN 354-58-5)

    0 %

    -

    31.12.2018

    ex 2903 77 90

    10

    Chlorotrifluoroethylene (CAS RN 79-38-9)

    0 %

    -

    31.12.2016

     (7)ex 2903 79 30

    10

    Trans-1-chloro-3,3,3-trifluoropropene (CAS RN 102687-65-0)

    0 %

    -

    31.12.2019

    ex 2903 89 90

    10

    1,6,7,8,9,14,15,16,17,17,18,18-Dodecachloropentacyclo [12.2.1.16,9.02,13.05,10]octadeca-7,15-diene (CAS RN 13560-89-9)

    0 %

    -

    31.12.2018

    ex 2903 89 90

    30

    Octafluorocyclopentene (CAS RN 559-40-0)

    0 %

    -

    31.12.2016

    ex 2903 89 90

    40

    Hexabromocyclododecane

    0 %

    -

    31.12.2016

    ex 2903 89 90

    50

    Chlorocyclopentane (CAS RN 930-28-9)

    0 %

    -

    31.12.2017

     (7)ex 2903 99 90

    15

    4-Bromo-2-chloro-1-fluorobenzene (CAS RN 60811-21-4)

    0 %

    -

    31.12.2020

    ex 2903 99 90

    20

    1,2-Bis(pentabromophenyl)ethane (CAS RN 84852-53-9)

    0 %

    -

    31.12.2018

    ex 2903 99 90

    40

    2,6-Dichlorotoluene, of a purity by weight of 99 % or more and containing:

    — 0,001 mg/kg or less of tetrachlorodibenzodioxines,

    — 0,001 mg/kg or less of tetrachlorodibenzofurans,

    — 0,2 mg/kg or less of tetrachlorobiphenyls

    0 %

    -

    31.12.2018

    ex 2903 99 90

    50

    Fluorobenzene (CAS RN 462-06-6)

    0 %

    -

    31.12.2018

    ex 2903 99 90

    75

    3-Chloro-alpha,alpha,alpha-trifluorotoluene (CAS RN 98-15-7)

    0 %

    -

    31.12.2019

    ex 2903 99 90

    80

    1-Bromo-3,4,5-trifluorobenzene (CAS RN 138526-69-9)

    0 %

    -

    31.12.2018

    ex 2903 99 90

    85

    2-Bromo-9H-fluorene (CAS RN 1133-80-8)

    0 %

    -

    31.12.2018

    ex 2904 10 00

    30

    Sodium p-styrenesulphonate (CAS RN 2695-37-6)

    0 %

    -

    31.12.2019

    ex 2904 10 00

    50

    Sodium 2-methylprop-2-ene-1-sulphonate (CAS RN 1561-92-8)

    0 %

    -

    31.12.2019

     (7)ex 2904 20 00

    10

    Nitromethane (CAS RN 75-52-5)

    0 %

    -

    31.12.2020

     (7)ex 2904 20 00

    20

    Nitroethane (CAS RN 79-24-3)

    0 %

    -

    31.12.2020

     (7)ex 2904 20 00

    30

    1-Nitropropane (CAS RN 108-03-2)

    0 %

    -

    31.12.2020

    ex 2904 20 00

    40

    2-Nitropropane (CAS RN 79-46-9)

    0 %

    -

    31.12.2019

    ex 2904 90 40

    10

    Trichloronitromethane, for the manufacture of goods of subheading 3808 92 (CAS RN 76-06-2) (1)

    0 %

    -

    31.12.2019

    ex 2904 90 95

    20

    1-Chloro-2,4-dinitrobenzene (CAS RN 97-00-7)

    0 %

    -

    31.12.2019

     (7)ex 2904 90 95

    25

    Difluoromethanesulphonyl chloride (CAS RN 1512-30-7)

    0 %

    -

    31.12.2020

    ex 2904 90 95

    30

    Tosyl chloride (CAS RN 98-59-9)

    0 %

    -

    31.12.2019

     (7)ex 2904 90 95

    35

    1-Fluoro-4-nitrobenzene (CAS RN 350-46-9)

    0 %

    -

    31.12.2020

    ex 2904 90 95

    40

    4-Chlorobenzenesulphonyl chloride (CAS RN 98-60-2)

    0 %

    -

    31.12.2017

    ex 2904 90 95

    50

    Ethanesulphonyl chloride (CAS RN 594-44-5)

    0 %

    -

    31.12.2018

    ex 2904 90 95

    60

    4,4′-Dinitrostilbene-2,2′-disulfonic acid (CAS RN 128-42-7)

    0 %

    -

    31.12.2019

    ex 2904 90 95

    70

    1-Chloro-4-nitrobenzene (CAS RN 100-00-5)

    0 %

    -

    31.12.2019

    ex 2904 90 95

    80

    1-Chloro-2-nitrobenzene (CAS RN 88-73-3)

    0 %

    -

    31.12.2019

    ex 2905 11 00

    10

    Methanol (CAS RN 67-56-1) with a purity of 99,85 % by weight or more

    0 %

    -

    31.12.2018

    ex 2905 19 00

    11

    Potassium tert-butanolate (CAS RN 865-47-4), whether or not in the form of a solution in tetrahydrofuran according to note 1e) to Chapter 29 of the CN

    0 %

    -

    31.12.2018

    ex 2905 19 00

    20

    Butyltitanate monohydrate, homopolymer (CAS RN162303-51-7)

    0 %

    -

    31.12.2018

    ex 2905 19 00

    25

    Tetra-(2-ethylhexyl) titanate (CAS RN 1070-10-6)

    0 %

    -

    31.12.2018

    ex 2905 19 00

    30

    2,6-Dimethylheptan-4-ol (CAS RN 108-82-7)

    0 %

    -

    31.12.2018

    ex 2905 19 00

    40

    2,6-Dimethylheptan-2-ol (CAS RN 13254-34-7)

    0 %

    -

    31.12.2019

    ex 2905 19 00

    70

    Titanium tetrabutanolate (CAS RN 5593-70-4)

    0 %

    -

    31.12.2017

    ex 2905 19 00

    80

    Titanium tetraisopropoxide (CAS RN 546-68-9)

    0 %

    -

    31.12.2017

    ex 2905 19 00

    85

    Titanium tetraethanolate (CAS RN 3087-36-3)

    0 %

    -

    31.12.2018

    ex 2905 22 00

    10

    Linalool (CAS RN 78-70-6) containing by weight 90,7 % or more of (3R)-(-)-Linalool (CAS RN 126-91-0)

    0 %

    -

    31.12.2019

     (7)ex 2905 39 95

    10

    Propane-1,3-diol (CAS RN 504-63-2)

    0 %

    -

    31.12.2020

    ex 2905 39 95

    20

    Butane-1,2-diol (CAS RN 584-03-2)

    0 %

    -

    31.12.2016

    ex 2905 39 95

    30

    2,4,7,9-Tetramethyl-4,7-decanediol (CAS RN 17913-76-7)

    0 %

    -

    31.12.2016

    ex 2905 39 95

    40

    Decane-1,10-diol (CAS RN 112-47-0)

    0 %

    -

    31.12.2017

    ex 2905 39 95

    50

    2-Methyl-2-propylpropane-1,3-diol (CAS RN 78-26-2)

    0 %

    -

    31.12.2018

     (7)ex 2905 49 00

    10

    Ethylidynetrimethanol (CAS RN 77-85-0)

    0 %

    -

    31.12.2020

    ex 2905 59 98

    20

    2,2,2-Trifluoroethanol (CAS RN 75-89-8)

    0 %

    -

    31.12.2019

    2906 11 00

     

    Menthol (CAS RN 1490-04-6)

    0 %

    -

    31.12.2018

    ex 2906 19 00

    10

    Cyclohex-1,4-ylenedimethanol (CAS RN 105-08-8)

    0 %

    -

    31.12.2018

    ex 2906 19 00

    20

    4,4′-Isopropylidenedicyclohexanol (CAS RN 80-04-6)

    0 %

    -

    31.12.2018

    ex 2906 19 00

    50

    4-tert-Butylcyclohexanol (CAS RN 98-52-2)

    0 %

    -

    31.12.2019

    ex 2906 29 00

    20

    1-Hydroxymethyl-4-methyl-2,3,5,6-tetrafluorobenzene (CAS RN 79538-03-7)

    0 %

    -

    31.12.2018

    ex 2906 29 00

    30

    2-Phenylethanol (CAS RN 60-12-8)

    0 %

    -

    31.12.2017

    ex 2907 12 00

    20

    Mixture of meta-cresol (CAS RN 108-39-4) and para-cresol (CAS RN 106-44-5) with a purity by weight of 99 % or more

    0 %

    -

    31.12.2019

    ex 2907 12 00

    30

    p-Cresol (CAS RN 106-44-5)

    0 %

    -

    31.12.2019

    ex 2907 15 90

    10

    2-Naphthol (CAS RN 135-19-3)

    0 %

    -

    31.12.2016

    ex 2907 19 10

    10

    2,6-Xylenol (CAS RN 576-26-1)

    0 %

    -

    31.12.2019

    ex 2907 19 90

    20

    Biphenyl-4-ol (CAS RN 92-69-3)

    0 %

    -

    31.12.2018

    ex 2907 21 00

    10

    Resorcinol (CAS RN 108-46-3)

    0 %

    -

    31.12.2018

    ex 2907 29 00

    15

    6,6′-Di-tert-butyl-4,4′-butylidenedi-m-cresol (CAS RN 85-60-9)

    0 %

    -

    31.12.2018

    ex 2907 29 00

    20

    4,4′-(3,3,5-Trimethylcyclohexylidene)diphenol (CAS RN 129188-99-4)

    0 %

    -

    31.12.2018

    ex 2907 29 00

    25

    4-Hydroxybenzyl alcohol (CAS RN 623-05-2)

    0 %

    -

    31.12.2019

    ex 2907 29 00

    30

    4,4′,4′-Ethylidynetriphenol (CAS RN 27955-94-8)

    0 %

    -

    31.12.2018

    ex 2907 29 00

    35

    4-[2-(4-Hydroxy-3-prop-2-enylphenyl)propan-2-yl]-2-prop-2-enylphenol (CAS RN 1745-89-7)

    0 %

    -

    31.12.2016

    ex 2907 29 00

    40

    2,3,5-Trimethylhydroquinone (CAS RN 700-13-0)

    0 %

    -

    31.12.2016

    ex 2907 29 00

    45

    2-Methylhydroquinone (CAS RN 95-71-6)

    0 %

    -

    31.12.2016

    ex 2907 29 00

    50

    6,6′,6′-Tricyclohexyl-4,4′,4′-butane-1,1,3-triyltri(m-cresol) (CAS RN 111850-25-0)

    0 %

    -

    31.12.2018

    ex 2907 29 00

    55

    Biphenyl-2,2′-diol (CAS RN 1806-29-7)

    0 %

    -

    31.12.2017

    ex 2907 29 00

    65

    2,2′-Methylenebis(6-cyclohexyl-p-cresol) (CAS RN 4066-02-8)

    0 %

    -

    31.12.2019

    ex 2907 29 00

    70

    2,2′,2′,6,6′,6′-Hexa-tert-butyl-α,α -(mesitylene-2,4,6-triyl)tri-p-cresol (CAS RN 1709-70-2)

    0 %

    -

    31.12.2018

    ex 2907 29 00

    85

    Phloroglucinol whether or not hydrated

    0 %

    -

    31.12.2018

    ex 2908 19 00

    10

    Pentafluorophenol (CAS RN 771-61-9)

    0 %

    -

    31.12.2018

    ex 2908 19 00

    20

    4,4′-(Perfluoroisopropylidene)diphenol (CAS RN 1478-61-1)

    0 %

    -

    31.12.2018

    ex 2908 19 00

    30

    4-Chlorophenol (CAS RN 106-48-9)

    0 %

    -

    31.12.2019

    ex 2908 99 00

    30

    4-Nitrophenol (CAS RN 100-02-7)

    0 %

    -

    31.12.2018

    ex 2908 99 00

    40

    4,5-Dihydroxynaphthalene-2,7-disulphonic acid (CAS RN 148-25-4)

    0 %

    -

    31.12.2017

    ex 2909 19 90

    20

    Bis(2-chloroethyl) ether (CAS RN 111-44-4)

    0 %

    -

    31.12.2018

    ex 2909 19 90

    30

    Mixture of isomers of nonafluorobutyl methyl ether or nonafluorobutyl ethyl ether, of a purity by weight of 99 % or more

    0 %

    -

    31.12.2018

    ex 2909 19 90

    50

    3-Ethoxy-perfluoro-2-methylhexane (CAS RN 297730-93-9)

    0 %

    -

    31.12.2016

    ex 2909 19 90

    60

    1-Methoxyheptafluoropropane (CAS RN 375-03-1)

    0 %

    -

    31.12.2018

    ex 2909 20 00

    10

    8-Methoxycedrane (CAS RN 19870-74-7)

    0 %

    -

    31.12.2016

    ex 2909 30 38

    10

    Bis(pentabromophenyl) ether (CAS RN 1163-19-5)

    0 %

    -

    31.12.2018

    ex 2909 30 38

    20

    1,1′-Propane-2,2-diylbis[3,5-dibromo-4-(2,3-dibromopropoxy)benzene] (CAS RN 21850-44-2)

    0 %

    -

    31.12.2016

     (7)ex 2909 30 38

    30

    1,1′-(1-Methylethylidene)bis[3,5-dibromo-4-(2,3-dibromo-2-methylpropoxy)]-benzene (CAS RN 97416-84-7)

    0 %

    -

    31.12.2020

    ex 2909 30 90

    10

    2-(Phenylmethoxy)naphthalene (CAS RN 613-62-7)

    0 %

    -

    31.12.2019

    ex 2909 30 90

    20

    1,2-Bis(3-methyl-phenoxy)ethane (CAS RN 54914-85-1)

    0 %

    -

    31.12.2019

     (7)ex 2909 30 90

    30

    3,4,5-Trimethoxytoluene (CAS RN 6443-69-2)

    0 %

    -

    31.12.2020

     (7)ex 2909 30 90

    40

    1-Chloro-2,5-dimethoxybenzene (CAS RN 2100-42-7)

    0 %

    -

    31.12.2020

    ex 2909 50 00

    10

    4-(2-Methoxyethyl)phenol (CAS RN 56718-71-9)

    0 %

    -

    31.12.2018

     (7)ex 2909 50 00

    20

    Ubiquinol (CAS RN 992-78-9)

    0 %

    -

    31.12.2020

    ex 2909 50 00

    30

    2-tert-Butyl-4-hydroxyanisole and 3-tert-butyl-4-hydroxyanisole, mixed isomers (CAS RN 25013-16-5)

    0 %

    -

    31.12.2019

    ex 2909 60 00

    10

    Bis(α,α-dimethylbenzyl) peroxide (CAS RN 80-43-3)

    0 %

    -

    31.12.2018

    ex 2909 60 00

    20

    1,4-Di(2-tert-butylperoxyisopropyl)benzene (CAS RN 25155-25-3)

    0 %

    -

    31.12.2016

    ex 2909 60 00

    30

    3,6,9-Triethyl-3,6,9-trimethyl-1,4,7-triperoxonane (CAS RN 24748-23-0), dissolved in isoparaffinic hydrocarbons

    0 %

    -

    31.12.2019

    ex 2910 90 00

    15

    1,2-Epoxycyclohexane (CAS RN 286-20-4)

    0 %

    -

    31.12.2018

    ex 2910 90 00

    20

    2-[(2-Methoxyphenoxy)methyl]oxirane (CAS RN 2210-74-4)

    0 %

    -

    31.12.2018

    ex 2910 90 00

    30

    2,3-Epoxypropan-1-ol (glycidol) (CAS RN 556-52-5)

    0 %

    -

    31.12.2018

     (7)ex 2910 90 00

    50

    2,3-Epoxypropyl phenyl ether (CAS RN 122-60-1)

    0 %

    -

    31.12.2020

    ex 2910 90 00

    80

    Allyl glycidyl ether (CAS RN 106-92-3)

    0 %

    -

    31.12.2016

    ex 2912 29 00

    40

    (2E,4E,6E,8E,10E,12E)-2,7,11-Trimethyl-13-(2,6,6-trimethyl-1-cyclohexen-1-yl)-2,4,6,8,10,12-tridecahexaenal (CAS RN 1638-05-7)

    0 %

    -

    31.12.2016

    ex 2912 29 00

    50

    4-Isobutylbenzaldehyde (CAS RN 40150-98-9)

    0 %

    -

    31.12.2017

    ex 2912 29 00

    60

    3,4-Dimethylbenzaldehyde (CAS RN 5973-71-7)

    0 %

    -

    31.12.2018

    ex 2912 29 00

    70

    4-tert-Butylbenzaldehyde (CAS RN 939-97-9)

    0 %

    -

    31.12.2018

    ex 2912 29 00

    80

    4-Isopropylbenzaldehyde (CAS RN 122-03-2)

    0 %

    -

    31.12.2018

    ex 2912 49 00

    10

    3-Phenoxybenzaldehyde (CAS RN 39515-51-0)

    0 %

    -

    31.12.2018

    ex 2912 49 00

    20

    4-Hydroxybenzaldehyde (CAS RN 123-08-0)

    0 %

    -

    31.12.2017

     (7)ex 2912 49 00

    30

    Salicylaldehyde (CAS RN 90-02-8)

    0 %

    -

    31.12.2020

     (7)ex 2912 49 00

    40

    3-Hydroxy-p-anisaldehyde (CAS RN 621-59-0)

    0 %

    -

    31.12.2020

    ex 2914 19 90

    20

    Heptan-2-one (CAS RN 110-43-0)

    0 %

    -

    31.12.2017

    ex 2914 19 90

    30

    3-Methylbutanone (CAS RN 563-80-4)

    0 %

    -

    31.12.2017

    ex 2914 19 90

    40

    Pentan-2-one (CAS RN 107-87-9)

    0 %

    -

    31.12.2017

    ex 2914 29 00

    20

    Cyclohexadec-8-enone (CAS RN 3100-36–5)

    0 %

    -

    31.12.2018

     (7)ex 2914 29 00

    30

    (R)-p-Mentha-16,8-dien-2-one (CAS RN 6485-40-1)

    0 %

    -

    31.12.2020

    ex 2914 29 00

    40

    Camphor

    0 %

    -

    31.12.2018

    ex 2914 29 00

    50

    trans-β-Damascone (CAS RN 23726-91-2)

    0 %

    -

    31.12.2016

    ex 2914 39 00

    15

    2,6-Dimethyl-1-indanone (CAS RN 66309-83-9)

    0 %

    -

    31.12.2019

    ex 2914 39 00

    25

    1,3-Diphenylpropane-1,3-dione (CAS RN 120-46-7)

    0 %

    -

    31.12.2019

    ex 2914 39 00

    30

    Benzophenone (CAS RN 119-61-9)

    0 %

    -

    31.12.2017

    ex 2914 39 00

    50

    4-Phenylbenzophenone (CAS RN 2128-93-0)

    0 %

    -

    31.12.2018

    ex 2914 39 00

    60

    4-Methylbenzophenone (CAS RN 134-84-9)

    0 %

    -

    31.12.2018

    ex 2914 39 00

    70

    Benzil (CAS RN 134-81-6)

    0 %

    -

    31.12.2017

    ex 2914 39 00

    80

    4′-Methylacetophenone (CAS RN 122-00-9)

    0 %

    -

    31.12.2017

     (7)ex 2914 50 00

    20

    3′-Hydroxyacetophenone (CAS RN 121-71-1)

    0 %

    -

    31.12.2020

    ex 2914 50 00

    25

    4′-Methoxyacetophenone (CAS RN 100-06-1)

    0 %

    -

    31.12.2018

    ex 2914 50 00

    30

    2′-Hydroxyacetophenone (CAS RN 118-93-4)

    0 %

    -

    31.12.2018

    ex 2914 50 00

    36

    2,7-Dihydroxy-9-fluorenone (CAS RN 42523-29-5)

    0 %

    -

    31.12.2018

    ex 2914 50 00

    40

    4-(4-Hydroxyphenyl)butan-2-one (CAS RN 5471-51-2)

    0 %

    -

    31.12.2016

    ex 2914 50 00

    45

    3,4-Dihydroxybenzophenone (CAS RN 10425-11-3)

    0 %

    -

    31.12.2017

    ex 2914 50 00

    55

    2,2′,4,4′-Tetrahydroxybenzophenone (CAS RN 131-55-5)

    0 %

    -

    31.12.2018

    ex 2914 50 00

    60

    2,2-Dimethoxy-2-phenylacetophenone (CAS RN 24650-42-8)

    0 %

    -

    31.12.2017

     (7)ex 2914 50 00

    65

    3-Methoxyacetophenone (CAS RN 586-37-8)

    0 %

    -

    31.12.2020

    ex 2914 50 00

    70

    16α,17α-Epoxy-3β-hydroxypregn-5-en-20-one (CAS RN 974-23-2)

    0 %

    -

    31.12.2017

    ex 2914 50 00

    80

    2′,6′-Dihydroxyacetophenone (CAS RN 699-83-2)

    0 %

    -

    31.12.2018

    ex 2914 69 90

    10

    2-Ethylanthraquinone (CAS RN 84-51-5)

    0 %

    -

    31.12.2018

    ex 2914 69 90

    20

    2-Pentylanthraquinone (CAS RN 13936-21-5)

    0 %

    -

    31.12.2019

    ex 2914 69 90

    30

    1,4-Dihydroxyanthraquinone (CAS RN 81-64-1)

    0 %

    -

    31.12.2018

    ex 2914 69 90

    40

    p-Benzoquinone (CAS RN 106-51-4)

    0 %

    -

    31.12.2016

    ex 2914 69 90

    50

    Reaction mass of 2-(1,2-dimethylpropyl)anthraquinone (CAS RN 68892-28-4) and 2-(1,1-dimethylpropyl)anthraquinone (CAS RN 32588-54-8)

    0 %

    -

    31.12.2019

     (7)ex 2914 70 00

    15

    1-(4-Methylphenyl)-4,4,4-trifluorobutane-1,3-dione (CAS RN 720-94-5)

    0 %

    -

    31.12.2020

    ex 2914 70 00

    20

    2,4′-Difluorobenzophenone (CAS RN 342-25-6)

    0 %

    -

    31.12.2017

     (7)ex 2914 70 00

    25

    1-(7-Bromo-9,9-difluoro-9H-fluoren-2-yl)-2-chloroethanone (CAS RN 1378387-81-5)

    0 %

    -

    31.12.2020

    ex 2914 70 00

    40

    Perfluoro(2-methylpentan-3-one) (CAS RN 756-13-8)

    0 %

    -

    31.12.2018

    ex 2914 70 00

    50

    3′-Chloropropiophenone (CAS RN 34841-35-5)

    0 %

    -

    31.12.2018

     (7)ex 2914 70 00

    60

    4′-tert-Butyl-2′,6′-dimethyl-3′,5′-dinitroacetophenone (CAS RN 81-14-1)

    0 %

    -

    31.12.2020

    ex 2914 70 00

    70

    4-Chloro-4′-hydroxybenzophenone (CAS RN 42019-78-3)

    0 %

    -

    31.12.2016

    ex 2914 70 00

    80

    Tetrachloro-p-benzoquinone (CAS RN 118-75-2)

    0 %

    -

    31.12.2018

    ex 2915 29 00

    10

    Antimony triacetate (CAS RN 6923-52-0)

    0 %

    -

    31.12.2018

    ex 2915 39 00

    25

    2-Methylcyclohexyl acetate (CAS RN 5726-19-2)

    0 %

    -

    31.12.2018

    ex 2915 39 00

    40

    tert-Butyl acetate (CAS RN 540-88-5)

    0 %

    -

    31.12.2018

    ex 2915 39 00

    50

    3-Acetylphenyl acetate (CAS RN 2454-35-5)

    0 %

    -

    31.12.2019

     (7)ex 2915 39 00

    60

    Dodec-8-enyl acetate (CAS RN 28079-04-1)

    0 %

    -

    31.12.2020

     (7)ex 2915 39 00

    65

    Dodeca-7,9-dienyl acetate (CAS RN 54364-62-4)

    0 %

    -

    31.12.2020

     (7)ex 2915 39 00

    70

    Dodec-9-enyl acetate (CAS RN 16974-11-1)

    0 %

    -

    31.12.2020

    ex 2915 39 00

    75

    Isobornyl acetate (CAS RN 125-12-2)

    0 %

    -

    31.12.2016

    ex 2915 39 00

    80

    1-Phenylethyl acetate (CAS RN 93-92-5)

    0 %

    -

    31.12.2016

    ex 2915 39 00

    85

    2-tert-Butylcyclohexyl acetate (CAS RN 88-41-5)

    0 %

    -

    31.12.2018

    ex 2915 60 19

    10

    Ethyl butyrate (CAS RN 105-54-4)

    0 %

    -

    31.12.2017

    ex 2915 90 70

    30

    3,3-Dimethylbutyryl chloride (CAS RN 7065-46-5)

    0 %

    -

    31.12.2017

    ex 2915 90 70

    45

    Trimethyl orthoformate (CAS RN 149-73-5)

    0 %

    -

    31.12.2019

    ex 2915 90 70

    50

    Allyl heptanoate (CAS RN 142-19-8)

    0 %

    -

    31.12.2019

    ex 2915 90 70

    55

    Triethyl orthoformate (CAS RN 122-51-0)

    0 %

    -

    31.12.2018

     (7)ex 2915 90 70

    60

    Ethyl-6,8-dichlorooctanoate (CAS RN 1070-64-0)

    0 %

    -

    31.12.2020

    ex 2915 90 70

    70

    Cobalt borate neodecanoate complexes, with a purity by weight of 92 % or more (CAS RN 68457-13-6)

    0 %

    -

    31.12.2016

    ex 2915 90 70

    75

    2,2-Dimethylbutyryl chloride (CAS RN 5856-77-9)

    0 %

    -

    31.12.2017

    ex 2915 90 70

    80

    Ethyl difluoroacetate (CAS RN 454-31-9)

    0 %

    -

    31.12.2016

    ex 2916 12 00

    10

    2-tert-Butyl-6-(3-tert-butyl-2-hydroxy-5-methylbenzyl)-4-methylphenyl acrylate (CAS RN 61167-58-6)

    0 %

    -

    31.12.2018

    ex 2916 12 00

    40

    2,4-Di-tert-pentyl-6-[1-(3,5-di-tert-pentyl-2-hydroxyphenyl)ethyl]phenylacrylate (CAS RN 123968-25-2)

    0 %

    -

    31.12.2018

    ex 2916 12 00

    70

    2-(2-Vinyloxyethoxy)ethyl acrylate (CAS RN 86273-46-3)

    0 %

    -

    31.12.2017

     (7)ex 2916 13 00

    10

    Hydroxyzinc methacrylate powder (CAS RN 63451-47-8)

    0 %

    -

    31.12.2020

    ex 2916 13 00

    20

    Zinc dimethacrylate, in the form of powder (CAS RN 13189-00-9)

    0 %

    -

    31.12.2018

    ex 2916 14 00

    10

    2,3-Epoxypropyl methacrylate (CAS RN 106-91-2)

    0 %

    -

    31.12.2018

    ex 2916 14 00

    20

    Ethyl methacrylate (CAS RN 97-63-2)

    0 %

    -

    31.12.2018

    ex 2916 19 95

    20

    Methyl 3,3-dimethylpent-4-enoate (CAS RN 63721-05-1)

    0 %

    -

    31.12.2018

    ex 2916 19 95

    40

    Sorbic acid for use in the manufacture of animal feeds (CAS RN 110-44-1) (1)

    0 %

    -

    31.12.2018

    ex 2916 19 95

    50

    Methyl 2-fluoroacrylate (CAS RN 2343-89-7)

    0 %

    -

    31.12.2019

    ex 2916 20 00

    50

    Ethyl 2,2-dimethyl-3-(2-methylpropenyl)cyclopropanecarboxylate (CAS RN 97-41-6)

    0 %

    -

    31.12.2018

     (7)ex 2916 20 00

    60

    3-Cyclohexylpropionic acid (CAS RN 701-97-3)

    0 %

    -

    31.12.2020

    ex 2916 31 00

    10

    Benzyl benzoate (CAS RN 120-51-4)

    0 %

    -

    31.12.2016

    ex 2916 39 90

    10

    2,3,4,5-Tetrafluorobenzoic acid (CAS RN 1201-31-6)

    0 %

    -

    31.12.2016

    ex 2916 39 90

    13

    3,5-Dinitrobenzoic acid (CAS RN 99-34-3)

    0 %

    -

    31.12.2019

    ex 2916 39 90

    15

    2-Chloro-5-nitrobenzoic acid (CAS RN 2516-96-3)

    0 %

    -

    31.12.2016

    ex 2916 39 90

    18

    2,4-Dichlorophenylacetic acid (CAS RN 19719-28-9)

    0 %

    -

    31.12.2019

    ex 2916 39 90

    20

    3,5-Dichlorobenzoyl chloride (CAS RN 2905-62-6)

    3,6%

    -

    31.12.2018

    ex 2916 39 90

    23

    (2,4,6-Trimethylphenyl)acetyl chloride (CAS RN 52629-46-6)

    0 %

    -

    31.12.2019

     (7)ex 2916 39 90

    25

    2-Methyl-3-(4-Fluorophenyl)-propionyl chloride (CAS RN 1017183-70-8)

    0 %

    -

    31.12.2016

     (7)ex 2916 39 90

    30

    2,4,6-Trimethylbenzoyl chloride (CAS RN 938-18-1)

    0 %

    -

    31.12.2020

    ex 2916 39 90

    35

    Methyl 4-tert-butylbenzoate (CAS RN 26537-19-9)

    0 %

    -

    31.12.2018

    ex 2916 39 90

    38

    6-Bromonaphthalene-2-carboxylic acid (CAS RN 5773-80-8)

    0 %

    -

    31.12.2018

    ex 2916 39 90

    45

    2-Chlorobenzoic acid (CAS RN 118-91-2)

    0 %

    -

    31.12.2016

    ex 2916 39 90

    48

    3-Fluorobenzoyl chloride (CAS RN 1711-07-5)

    0 %

    -

    31.12.2018

    ex 2916 39 90

    50

    3,5-Dimethylbenzoyl chloride (CAS RN 6613-44-1)

    0 %

    -

    31.12.2018

     (7)ex 2916 39 90

    53

    5-Iodo-2-methylbenzoic acid (CAS RN 54811-38-0)

    0 %

    -

    31.12.2020

    ex 2916 39 90

    55

    4-tert-Butylbenzoic acid (CAS RN 98-73-7)

    0 %

    -

    31.12.2017

    ex 2916 39 90

    60

    4-Ethylbenzoyl chloride (CAS RN 16331-45-6)

    0 %

    -

    31.12.2018

    ex 2916 39 90

    70

    Ibuprofen (INN) (CAS RN 15687-27-1)

    0 %

    -

    31.12.2018

    ex 2916 39 90

    75

    m-Toluic acid (CAS RN 99-04-7)

    0 %

    -

    31.12.2017

    ex 2916 39 90

    85

    (2,4,5-Trifluorophenyl)acetic acid (CAS RN 209995-38-0)

    0 %

    -

    31.12.2017

    ex 2917 11 00

    20

    Bis(p-methylbenzyl) oxalate (CAS RN 18241-31-1)

    0 %

    -

    31.12.2018

    ex 2917 11 00

    30

    Cobalt oxalate (CAS RN 814-89-1)

    0 %

    -

    31.12.2019

    ex 2917 19 10

    10

    Dimethyl malonate (CAS RN 108-59-8)

    0 %

    -

    31.12.2019

    ex 2917 19 10

    20

    Diethyl malonate (CAS RN 105-53-3)

    0 %

    -

    31.12.2017

     (7)ex 2917 19 80

    15

    Dimethyl but-2-ynedioate (CAS RN 762-42-5)

    0 %

    -

    31.12.2018

     (7)ex 2917 19 80

    20

    Sodium 1,2-bis(cyclohexyloxycarbonyl)ethanesulphonate (CAS RN 23386-52-9)

    0 %

    -

    31.12.2018

     (7)ex 2917 19 80

    30

    Ethylene brassylate (CAS RN 105-95-3)

    0 %

    -

    31.12.2019

     (7)ex 2917 19 80

    50

    Tetradecanedioic acid (CAS RN 821-38-5)

    0 %

    -

    31.12.2020

     (7)ex 2917 19 80

    70

    Itaconic acid (CAS RN 97-65-4)

    0 %

    -

    31.12.2018

    ex 2917 20 00

    30

    1,4,5,6,7,7-Hexachloro-8,9,10-trinorborn-5-ene-2,3-dicarboxylic anhydride (CAS RN 115-27-5)

    0 %

    -

    31.12.2018

    ex 2917 20 00

    40

    3-Methyl-1,2,3,6-tetrahydrophthalic anhydride (CAS RN 5333-84-6)

    0 %

    -

    31.12.2018

    ex 2917 34 00

    10

    Diallyl phthalate (CAS RN 131-17-9)

    0 %

    -

    31.12.2018

     (7)ex 2917 39 95

    20

    Dibutyl-1,4-benzenedicarboxylate (CAS RN 1962-75-0)

    0 %

    -

    31.12.2020

     (7)ex 2917 39 95

    30

    Benzene-1,2:4,5-tetracarboxylic dianhydride (CAS RN 89-32-7)

    0 %

    -

    31.12.2020

    ex 2917 39 95

    40

    Dimethyl 2-nitroterephthalate (CAS RN 5292-45-5)

    0 %

    -

    31.12.2018

    ex 2917 39 95

    50

    1,4,5,8-Naphthalenetetracarboxylic acid-1,8-monoanhydride (CAS RN 52671-72-4)

    0 %

    -

    31.12.2019

    ex 2917 39 95

    60

    Perylene-3,4:9,10-tetracarboxylic dianhydride(CAS RN 128-69-8)

    0 %

    -

    31.12.2019

     (7)ex 2917 39 95

    70

    1,2,4-Benzenetricarboxylic acid, 1,2,4-trioctyl ester (CAS RN 89-04-3) with a purity by weight of more than 96 %

    0 %

    -

    31.12.2020

    ex 2918 16 00

    20

    Calcium digluconate monohydrate (CAS RN 66905-23-5) for use in the manufacture of calcium gluconate lactate (CAS RN 11116-97-5) (1)

    0 %

    -

    31.12.2018

    ex 2918 19 30

    10

    Cholic acid (CAS RN 81-25-4)

    0 %

    -

    31.12.2019

    ex 2918 19 30

    20

    3-α,12-α-Dihydroxy-5-β-cholan-24-oic acid (deoxycholic acid) (CAS RN 83-44-3)

    0 %

    -

    31.12.2019

    ex 2918 19 98

    20

    L-Malic acid (CAS RN 97-67-6)

    0 %

    -

    31.12.2018

    ex 2918 29 00

    10

    Monohydroxynaphthoic acids

    0 %

    -

    31.12.2018

    ex 2918 29 00

    35

    Propyl 3,4,5-trihydroxybenzoate (CAS RN 121-79-9)

    0 %

    -

    31.12.2017

    ex 2918 29 00

    50

    Hexamethylene bis[3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate] (CAS RN 35074-77-2)

    0 %

    -

    31.12.2018

    ex 2918 29 00

    60

    Methyl-, ethyl-, propyl- or butyl esters of 4-hydroxybenzoic acid or their sodium salts (CAS RN 35285-68-8, 99-76-3, 5026-62-0, 94-26-8, 94-13-3, 35285-69-9, 120-47-8, 36457-20-2 or 4247-02-3)

    0 %

    -

    31.12.2016

    ex 2918 29 00

    70

    3,5-Diiodosalicylic acid (CAS RN 133-91-5)

    0 %

    -

    31.12.2019

    ex 2918 30 00

    30

    Methyl-2-benzoylbenzoate (CAS RN 606-28-0)

    0 %

    -

    31.12.2018

    ex 2918 30 00

    50

    Ethyl acetoacetate (CAS RN 141-97-9)

    0 %

    -

    31.12.2017

    ex 2918 30 00

    60

    4-Oxovaleric acid (CAS RN 123-76-2)

    0 %

    -

    31.12.2019

    ex 2918 30 00

    70

    2-[4-Chloro-3-(chlorosulphonyl)benzoyl]benzoic acid (CAS RN 68592-12-1)

    0 %

    -

    31.12.2019

    ex 2918 99 90

    10

    3,4-Epoxycyclohexylmethyl 3,4-epoxycyclohexanecarboxylate (CAS RN 2386-87-0)

    0 %

    -

    31.12.2018

    ex 2918 99 90

    15

    Ethyl 2,3-epoxy-3-phenylbutyrate (CAS RN 77-83-8)

    0 %

    -

    31.12.2017

    ex 2918 99 90

    20

    Methyl 3-methoxyacrylate (CAS RN 5788-17-0)

    0 %

    -

    31.12.2019

    ex 2918 99 90

    25

    Methyl (E)-3-methoxy-2-(2-chloromethylphenyl)-2-propenoate (CAS RN 117428-51-0)

    0 %

    -

    31.12.2018

    ex 2918 99 90

    30

    Methyl 2-(4-hydroxyphenoxy)propionate (CAS RN 96562-58-2)

    0 %

    -

    31.12.2018

    ex 2918 99 90

    35

    p-Anisic acid (CAS RN 100-09-4)

    0 %

    -

    31.12.2019

    ex 2918 99 90

    40

    trans-4-Hydroxy-3-methoxycinnamic acid (CAS RN 1135-24-6)

    0 %

    -

    31.12.2018

    ex 2918 99 90

    45

    4-Methylcatechol dimethyl acetate (CAS RN 52589-39-6)

    0 %

    -

    31.12.2019

    ex 2918 99 90

    50

    Methyl 3,4,5-trimethoxybenzoate (CAS RN 1916-07-0)

    0 %

    -

    31.12.2018

     (7)ex 2918 99 90

    55

    Stearyl glycyrrhetinate(CAS RN 13832-70-7)

    0 %

    -

    31.12.2019

    ex 2918 99 90

    60

    3,4,5-Trimethoxybenzoic acid (CAS RN 118-41-2)

    0 %

    -

    31.12.2018

    ex 2918 99 90

    65

    Acetic acid, difluoro[1,1,2,2-tetrafluoro-2-(pentafluoroethoxy)ethoxy]-, ammonium salt (CAS RN 908020-52-0)

    0 %

    -

    31.12.2019

    ex 2918 99 90

    70

    Allyl-(3-methylbutoxy)acetate (CAS RN 67634-00-8)

    0 %

    -

    31.12.2019

    ex 2918 99 90

    75

    3,4-Dimethoxybenzoic acid (CAS RN 93-07-2)

    0 %

    -

    31.12.2019

    ex 2918 99 90

    80

    Sodium 5-[2-chloro-4-(trifluoromethyl)phenoxy]-2-nitrobenzoate (CAS RN 62476-59-9)

    0 %

    -

    31.12.2016

     (7)ex 2918 99 90

    85

    Trinexapac-Ethyl (ISO) (CAS RN 95266-40-3) with a purity by weight of 96 % or more

    0 %

    -

    31.12.2020

    ex 2919 90 00

    10

    2,2′-Methylenebis(4,6-di-tert-butylphenyl) phosphate, monosodium salt (CAS RN 85209-91-2)

    0 %

    -

    31.12.2018

    ex 2919 90 00

    30

    Aluminium hydroxybis[2,2′-methylenebis(4,6-di-tert-butylphenyl)phosphate] (CAS RN 151841-65-5)

    0 %

    -

    31.12.2018

    ex 2919 90 00

    40

    Tri-n-hexylphosphate (CAS RN 2528-39-4)

    0 %

    -

    31.12.2018

    ex 2919 90 00

    50

    Triethyl phosphate (CAS RN 78-40-0)

    0 %

    -

    31.12.2016

    ex 2919 90 00

    60

    Bisphenol-A bis(diphenyl phosphate) (CAS RN 5945-33-5)

    0 %

    -

    31.12.2018

    ex 2919 90 00

    70

    Tris(2-butoxyethyl)phosphate (CAS RN 78-51-3)

    0 %

    -

    31.12.2019

    ex 2920 19 00

    10

    Fenitrothion (ISO) (CAS RN 122-14-5)

    0 %

    -

    31.12.2018

    ex 2920 19 00

    20

    Tolclofos-methyl (ISO) (CAS RN 57018-04-9)

    0 %

    -

    31.12.2018

     (7)ex 2920 19 00

    30

    2,2′-Oxybis(5,5-dimethyl-1,3,2-dioxaphosphorinane)-2,2′-disulphide (CAS RN 4090-51-1)

    0 %

    -

    31.12.2019

    ex 2920 90 10

    10

    Diethyl sulphate (CAS RN 64-67-5)

    0 %

    -

    31.12.2018

    ex 2920 90 10

    20

    Diallyl 2,2′-oxydiethyl dicarbonate (CAS RN 142-22-3)

    0 %

    -

    31.12.2018

    ex 2920 90 10

    40

    Dimethyl carbonate (CAS RN 616-38-6)

    0 %

    -

    31.12.2018

    ex 2920 90 10

    50

    Di-tert-butyl dicarbonate (CAS RN 24424-99-5)

    0 %

    -

    31.12.2018

    ex 2920 90 10

    60

    2,4-Di-tert-butyl-5-nitrophenyl methyl carbonate (CAS RN 873055-55-1)

    0 %

    -

    31.12.2017

    2920 90 30

     

    Trimethyl phosphite (CAS RN 121-45-9)

    0 %

    -

    31.12.2018

    2920 90 40

     

    Triethyl phosphite (CAS RN 122-52-1)

    0 %

    -

    31.12.2016

    ex 2920 90 85

    10

    O,O′-Dioctadecyl pentaerythritol bis(phosphite) (CAS RN 3806-34-6)

    0 %

    -

    31.12.2018

     (7)ex 2920 90 85

    20

    Tris(methylphenyl)phosphite (CAS RN 25586-42-9)

    0 %

    -

    31.12.2020

     (7)ex 2920 90 85

    30

    2,2′-[[3,3′,5,5′-Tetrakis(1,1-dimethylethyl)[1,1′-biphenyl]-2,2′-diyl]bis(oxy)]bis[biphenyl-1,3,2-dioxaphosphepine], (CAS RN 138776-88-2)

    0 %

    -

    31.12.2020

     (7)ex 2920 90 85

    40

    Bis(2,4-dicumylphenyl)pentaerythritol diphosphite (CAS RN 154862-43-8)

    0 %

    -

    31.12.2020

    ex 2920 90 85

    50

    Fosetyl-aluminium (CAS RN 39148-24-8)

    0 %

    -

    31.12.2018

    ex 2920 90 85

    60

    Bis(neopentylglycolato)diboron (CAS RN 201733-56-4)

    0 %

    -

    31.12.2018

     (7)ex 2920 90 85

    80

    Bis(pinacolato)diboron (CAS RN 73183-34-3)

    0 %

    -

    31.12.2020

    ex 2921 19 50

    ex 2929 90 00

    10

    20

    Diethylamino-triethoxysilane (CAS RN 35077-00-0)

    0 %

    -

    31.12.2019

    ex 2921 19 60

    10

    2-(N,N-Diethylamino)ethyl chloride hydrochloride (CAS RN 869-24-9)

    0 %

    -

    31.12.2017

    ex 2921 19 99

    20

    Ethyl(2-methylallyl)amine (CAS RN 18328-90-0)

    0 %

    -

    31.12.2018

    ex 2921 19 99

    30

    Allylamine (CAS RN 107-11-9)

    0 %

    -

    31.12.2018

    ex 2921 19 99

    60

    Tetrakis(ethylmethylamino) zirconium (IV), (CAS RN 175923-04-3)

    0 %

    -

    31.12.2018

    ex 2921 19 99

    70

    N,N-Dimethyloctylamine – boron trichloride (1:1) (CAS RN 34762-90-8)

    0 %

    -

    31.12.2017

    ex 2921 19 99

    80

    Taurine (CAS RN 107-35-7), with 0,5 % addition of anti-caking agent silicon dioxide (CAS RN 112926-00-8)

    0 %

    -

    31.12.2019

    ex 2921 29 00

    20

    Tris[3-(dimethylamino)propyl]amine (CAS RN 33329-35-0)

    0 %

    -

    31.12.2018

    ex 2921 29 00

    30

    Bis[3-(dimethylamino)propyl]methylamine (CAS RN 3855-32-1)

    0 %

    -

    31.12.2018

     (7)ex 2921 29 00

    40

    Decamethylenediamine (CAS RN 646-25-3)

    0 %

    -

    31.12.2020

    ex 2921 29 00

    50

    N′-[3-(Dimethylamino)propyl]-N,N-dimethylpropane-1,3-diamine, (CAS RN 6711-48-4)

    0 %

    -

    31.12.2016

     (7)ex 2921 30 99

    30

    1,3-Cyclohexanedimethanamine (CAS RN 2579-20-6)

    0 %

    -

    31.12.2020

    ex 2921 30 99

    40

    Cyclopropylamin (CAS RN 765-30-0)

    0 %

    -

    31.12.2017

    ex 2921 42 00

    15

    4-Amino-3-nitrobenzenesulphonic acid (CAS RN 616-84-2)

    0 %

    -

    31.12.2018

    ex 2921 42 00

    20

    3-Chloroaniline (CAS RN 108-42-9)

    0 %

    -

    31.12.2018

    ex 2921 42 00

    25

    Sodium hydrogen 2-aminobenzene-1,4-disulphonate (CAS RN 24605-36-5)

    0 %

    -

    31.12.2018

    ex 2921 42 00

    30

    4-Nitroaniline (CAS RN 100-01-6)

    0 %

    -

    31.12.2018

     (7)ex 2921 42 00

    33

    2-Fluoroaniline (CAS RN 348-54-9)

    0 %

    -

    31.12.2020

    ex 2921 42 00

    35

    2-Nitroaniline (CAS RN 88-74-4)

    0 %

    -

    31.12.2018

    ex 2921 42 00

    40

    Sodium sulphanilate (CAS RN 515-74-2), also in form of its mono- or dihydrates (CAS RN 12333-70-0 or 6106-22-5)

    0 %

    -

    31.12.2019

    ex 2921 42 00

    45

    2,4,5-Trichloroaniline (CAS RN 636-30-6)

    0 %

    -

    31.12.2018

    ex 2921 42 00

    50

    3-Aminobenzenesulfonic acid (CAS RN 121-47-1)

    0 %

    -

    31.12.2018

    ex 2921 42 00

    70

    2-Aminobenzene-1,4-disulfonic acid (CAS RN 98-44-2)

    0 %

    -

    31.12.2019

    ex 2921 42 00

    80

    4-Chloro-2-nitroaniline (CAS RN 89-63-4)

    0 %

    -

    31.12.2018

     (7)ex 2921 42 00

    82

    2-Chloro-4-nitroaniline (CAS RN 121-87-9)

    0 %

    -

    31.12.2016

    ex 2921 42 00

    85

    3,5-Dichloroaniline (CAS RN 626-43-7)

    0 %

    -

    31.12.2018

    ex 2921 42 00

    86

    2,5-Dichloroaniline (CAS RN 95-82-9)

    0 %

    -

    31.12.2017

    ex 2921 42 00

    87

    N-Methylaniline (CAS RN 100-61-8)

    0 %

    -

    31.12.2017

    ex 2921 42 00

    88

    3,4-Dichloroaniline-6-sulphonic acid (CAS RN 6331-96-0)

    0 %

    -

    31.12.2017

    ex 2921 43 00

    20

    4-Amino-6-chlorotoluene-3-sulphonic acid (CAS RN 88-51-7)

    0 %

    -

    31.12.2018

    ex 2921 43 00

    30

    3-Nitro-p-toluidine (CAS RN 119-32-4)

    0 %

    -

    31.12.2018

    ex 2921 43 00

    40

    4-Aminotoluene-3-sulphonic acid (CAS RN 88-44-8)

    0 %

    -

    31.12.2018

     (7)ex 2921 43 00

    50

    4-Aminobenzotrifluoride (CAS RN 455-14-1)

    0 %

    -

    31.12.2020

     (7)ex 2921 43 00

    60

    3-Aminobenzotrifluoride (CAS RN 98-16-8)

    0 %

    -

    31.12.2020

    ex 2921 43 00

    70

    N-Ethyl-m-toluidine (CAS RN 102-27-2)

    0 %

    -

    31.12.2016

    ex 2921 43 00

    80

    6-Chloro-α,α,α-trifluoro-m-toluidine (CAS RN 121-50-6)

    0 %

    -

    31.12.2017

    ex 2921 44 00

    20

    Diphenylamine (CAS RN 122-39-4)

    0 %

    -

    31.12.2018

    ex 2921 45 00

    20

    2-Aminonaphthalene-1,5-disulphonic acid (CAS RN 117-62-4) or one of its sodium salts (CAS RN 19532-03-7) or (CAS RN 62203-79-6)

    0 %

    -

    31.12.2018

    ex 2921 45 00

    50

    7-Aminonaphthalene-1,3,6-trisulphonic acid (CAS RN 118-03-6)

    0 %

    -

    31.12.2018

    ex 2921 49 00

    20

    Pendimethalin (ISO) (CAS RN 40487-42-1)

    3.5%

    -

    31.12.2018

    ex 2921 49 00

    40

    N-1-Naphthylaniline (CAS RN 90-30-2)

    0 %

    -

    31.12.2018

    ex 2921 49 00

    50

    3,4-Xylidine (CAS RN 95-64-7)

    0 %

    -

    31.12.2018

     (7)ex 2921 49 00

    80

    4-Heptafluoroisopropyl-2-methylaniline (CAS RN 238098-26-5)

    0 %

    -

    31.12.2020

    ex 2921 49 00

    85

    4-Isopropylaniline (CAS RN 99-88-7)

    0 %

    -

    31.12.2017

    ex 2921 51 19

    20

    Toluene diamine (TDA), containing by weight:

    — 72 % or more but not more than 82 % of 4-methyl-m-phenylenediamine, and

    — 17 % or more but not more than 22 % of 2-methyl-m-phenylenediamine, and

    — not more than 0,23 % of residual tar

    whether or not containing 7 % or less of water

    0 %

    -

    31.12.2018

    ex 2921 51 19

    30

    2-Methyl-p-phenylenediamine sulphate (CAS RN 615-50-9)

    0 %

    -

    31.12.2018

    ex 2921 51 19

    40

    p-Phenylenediamine (CAS RN 106-50-3)

    0 %

    -

    31.12.2016

    ex 2921 51 19

    50

    Mono- and dichloroderivatives of p-phenylenediamine and p-diaminotoluene

    0 %

    -

    31.12.2019

    ex 2921 51 19

    60

    2,4-Diaminobenzenesulphonic acid (CAS RN 88-63-1)

    0 %

    -

    31.12.2018

     (7)ex 2921 51 19

    70

    4-Bromo- 1,2-diaminobenzene (CAS RN 1575-37-7)

    0 %

    -

    31.12.2020

    ex 2921 59 90

    10

    Mixture of isomers of 3,5-diethyltoluenediamine

    0 %

    -

    31.12.2018

    ex 2921 59 90

    30

    3,3′-Dichlorobenzidine dihydrochloride (CAS RN 612-83-9)

    0 %

    -

    31.12.2017

    ex 2921 59 90

    40

    4,4′-Diaminostilbene-2,2′-disulphonic acid (CAS RN 81-11-8)

    0 %

    -

    31.12.2018

    ex 2921 59 90

    60

    (2R,5R)-1,6-Diphenylhexane-2,5-diamine dihydrochloride (CAS RN 1247119-31-8)

    0 %

    -

    31.12.2017

     (7)ex 2921 59 90

    70

    Tris(4-aminophenyl)methane (CAS RN 548-61-8)

    0 %

    -

    31.12.2020

    ex 2922 19 85

    20

    2-(2-Methoxyphenoxy)ethylamine hydrochloride (CAS RN 64464-07-9)

    0 %

    -

    31.12.2017

    ex 2922 19 85

    25

    Titanium bis(triethanolamine)diisopropoxide (CAS RN 36673-16-2)

    0 %

    -

    31.12.2017

    ex 2922 19 85

    30

    N,N,N′,N′-Tetramethyl-2,2′-oxybis(ethylamine) (CAS RN 3033-62-3)

    0 %

    -

    31.12.2018

    ex 2922 19 85

    45

    2-[2-Hydroxyethyl(octadecyl)amino]ethanol (CAS RN 10213-78-2)

    0 %

    -

    31.12.2016

    ex 2922 19 85

    50

    2-(2-Methoxyphenoxy)ethylamine (CAS RN 1836-62-0)

    0 %

    -

    31.12.2018

    ex 2922 19 85

    60

    N,N,N′-trimethyl-N′-(2-hydroxy-ethyl) 2,2′-oxybis(ethylamine), (CAS RN 83016-70-0)

    0 %

    -

    31.12.2018

    ex 2922 19 85

    65

    trans-4-Aminocyclohexanol (CAS RN 27489-62-9)

    0 %

    -

    31.12.2018

    ex 2922 19 85

    70

    D-(-)-threo-2-amino-1-(p-nitrophenyl)propane-1,3-diol (CAS RN 716-61-0)

    0 %

    -

    31.12.2016

    ex 2922 19 85

    75

    2-Ethoxyethylamine (CAS RN 110-76-9)

    0 %

    -

    31.12.2018

    ex 2922 19 85

    80

    N-[2-[2-(Dimethylamino)ethoxy]ethyl]-N-methyl-1,3-propanediamine (CAS RN 189253-72-3)

    0 %

    -

    31.12.2019

    ex 2922 19 85

    85

    (1S,4R)-cis-4-Amino-2-cyclopentene-1-methanol-D-tartrate (CAS RN 229177-52-0)

    0 %

    -

    31.12.2018

    ex 2922 21 00

    10

    2-Amino-5-hydroxynaphthalene-1,7-disulphonic acid (CAS RN 6535-70-2)

    0 %

    -

    31.12.2018

    ex 2922 21 00

    30

    6-Amino-4-hydroxynaphthalene-2-sulphonic acid (CAS RN 90-51-7)

    0 %

    -

    31.12.2019

    ex 2922 21 00

    40

    7-Amino-4-hydroxynaphthalene-2-sulphonic acid (CAS RN 87-02-5)

    0 %

    -

    31.12.2018

    ex 2922 21 00

    50

    Sodium hydrogen 4-amino-5-hydroxynaphthalene-2,7-disulphonate (CAS RN 5460-09-3)

    0 %

    -

    31.12.2019

    ex 2922 21 00

    60

    4-Amino-5-hydroxynaphthalene-2,7-disulphonic acid with a purity by weight of 80 % or more (CAS RN 90-20-0)

    0 %

    -

    31.12.2018

    ex 2922 29 00

    20

    3-Aminophenol (CAS RN 591-27-5)

    0 %

    -

    31.12.2018

    ex 2922 29 00

    25

    5-Amino-o-cresol (CAS RN 2835-95-2)

    0 %

    -

    31.12.2018

     (7)ex 2922 29 00

    30

    1,2-Bis(2-aminophenoxy)ethane (CAS RN 52411-34-4)

    0 %

    -

    31.12.2020

     (7)ex 2922 29 00

    40

    4-Hydroxy-6-[(3-sulphophenyl)amino]naphthalene-2-sulphonic acid (CAS RN 25251-42-7)

    0 %

    -

    31.12.2020

    ex 2922 29 00

    45

    Anisidines

    0 %

    -

    31.12.2018

     (7)ex 2922 29 00

    60

    Aclonifen (ISO) (CAS RN 74070-46-5)

    0 %

    -

    30.06.2016

    ex 2922 29 00

    65

    4-Trifluoromethoxyaniline (CAS RN 461-82-5)

    0 %

    -

    31.12.2019

    ex 2922 29 00

    70

    4-Nitro-o-anisidine (CAS RN 97-52-9)

    0 %

    -

    31.12.2018

     (7)ex 2922 29 00

    75

    4-(2-Aminoethyl)phenol (CAS RN 51-67-2)

    0 %

    -

    31.12.2020

    ex 2922 29 00

    80

    3-Diethylaminophenol (CAS RN 91-68-9)

    0 %

    -

    31.12.2018

    ex 2922 29 00

    85

    4-Benzyloxyaniline hydrochloride (CAS RN 51388-20-6)

    0 %

    -

    31.12.2018

    ex 2922 39 00

    10

    1-Amino-4-bromo-9,10-dioxoanthracene-2-sulphonic acid and its salts

    0 %

    -

    31.12.2018

     (7)ex 2922 39 00

    20

    2-Amino-5-chlorobenzophenone (CAS RN 719-59-5)

    0 %

    -

    31.12.2020

    ex 2922 39 00

    70

    p-[(2-Chloroethyl)ethylamino]benzaldehyde (CAS RN 2643-07-4)

    0 %

    -

    31.12.2016

    ex 2922 43 00

    10

    Anthranilic acid (CAS RN 118-92-3)

    0 %

    -

    31.12.2018

    ex 2922 49 85

    10

    Ornithine aspartate (INNM) (CAS RN 3230-94-2)

    0 %

    -

    31.12.2018

    ex 2922 49 85

    15

    DL-Aspartic acid used for the manufacture of food-integrators (CAS RN 617-45-8) (1)

    0 %

    -

    31.12.2019

    ex 2922 49 85

    20

    3-Amino-4-chlorobenzoic acid (CAS RN 2840-28-0)

    0 %

    -

    31.12.2017

    ex 2922 49 85

    25

    Dimethyl 2-aminobenzene-1,4-dicarboxylate (CAS RN 5372-81-6)

    0 %

    -

    31.12.2019

    ex 2922 49 85

    40

    Norvaline

    0 %

    -

    31.12.2018

     (7)ex 2922 49 85

    45

    Glycine (CAS RN 56-40-6)

    0 %

    -

    31.12.2020

    ex 2922 49 85

    50

    D-(-)-Dihydrophenylglycine (CAS RN 26774-88-9)

    0 %

    -

    31.12.2019

    ex 2922 49 85

    55

    (E)-Ethyl 4-(dimethylamino)but-2-enoate maleate (CUS 0138070-7)

    0 %

    -

    31.12.2019

    ex 2922 49 85

    60

    Ethyl-4-dimethylaminobenzoate (CAS RN 10287-53-3)

    0 %

    -

    31.12.2017

     (7)ex 2922 49 85

    65

    Diethyl aminomalonate hydrochloride (CAS RN 13433-00-6)

    0 %

    -

    31.12.2020

    ex 2922 49 85

    70

    2-Ethylhexyl-4-dimethylaminobenzoate (CAS RN 21245-02-3)

    0 %

    -

    31.12.2018

    ex 2922 49 85

    80

    12-Aminododecanoic acid (CAS RN 693-57-2)

    0 %

    -

    31.12.2018

    ex 2922 50 00

    20

    1-[2-Amino-1-(4-methoxyphenyl)-ethyl]-cyclohexanol hydrochloride (CAS RN 130198-05-9)

    0 %

    -

    31.12.2019

    ex 2922 50 00

    70

    2-(1-Hydroxycyclohexyl)-2-(4-methoxyphenyl)ethylammonium acetate

    0 %

    -

    31.12.2018

    ex 2923 10 00

    10

    Calcium phosphoryl choline chloride tetrahydrate (CAS RN 72556-74-2)

    0 %

    -

    31.12.2019

    ex 2923 90 00

    10

    Tetramethylammonium hydroxide, in the form of an aqueous solution containing 25 % (± 0,5 %) by weight of tetramethylammonium hydroxide

    0 %

    -

    31.12.2018

    ex 2923 90 00

    20

    Tetramethylammonium hydrogen phthalate (CAS RN 79723-02-7)

    0 %

    -

    31.12.2019

    ex 2923 90 00

    25

    Tetrakis(dimethylditetradecylammonium) molybdate, (CAS RN 117342-25-3)

    0 %

    -

    31.12.2018

    ex 2923 90 00

    70

    Tetrapropylammonium hydroxide, in the form of an aqueous solution containing:

    — 40 % (± 2 %) by weight of tetrapropylammonium hydroxide,

    — 0,3 % by weight or less of carbonate,

    — 0,1 % by weight or less of tripropylamine,

    — 500 mg/kg or less of bromide, and

    — 25 mg/kg or less of potassium and sodium taken together

    0 %

    -

    31.12.2018

     (7)ex 2923 90 00

    75

    Tetraethylammonium hydroxide, in the form of an aqueous solution containing:

    — 35 % (± 0,5 %) by weight of tetraethylammonium hydroxide,

    — not more than 1 000 mg/kg of chloride,

    — not more than 2 mg/kg of iron, and

    — not more than 10 mg/kg of potassium

    0 %

    -

    31.12.2020

    ex 2923 90 00

    80

    Diallyldimethylammonium chloride, in the form of an aqueous solution containing by weight 63 % or more but not more than 67 % of diallyldimethylammonium chloride, (CAS RN 7398-69-8)

    0 %

    -

    31.12.2018

    ex 2923 90 00

    85

    N,N,N-Trimethylanilinium chloride (CAS RN 138-24-9)

    0 %

    -

    31.12.2019

    ex 2924 19 00

    10

    2-Acrylamido-2-methylpropanesulphonic acid (CAS RN 15214-89-8) or its sodium salt (CAS RN 5165-97-9), or its ammonium salt (CAS RN 58374-69-9)

    0 %

    -

    31.12.2018

    ex 2924 19 00

    15

    N-Ethyl N-methylcarbamoyl chloride (CAS RN 42252-34-6)

    0 %

    -

    31.12.2019

     (7)ex 2924 19 00

    20

    (R)-(-)-3-(carbamoylmethyl)-5-methylhexanoic acid (CAS RN 181289-33-8)

    0 %

    -

    31.12.2020

    ex 2924 19 00

    30

    Methyl 2-acetamido-3-chloropropionate (CAS RN 87333-22-0)

    0 %

    -

    31.12.2018

    ex 2924 19 00

    35

    Acetamide (CAS RN 60-35-5)

    0 %

    -

    31.12.2019

    ex 2924 19 00

    40

    N-(1,1-Dimethyl-3-oxobutyl)acrylamide (CAS RN 2873-97-4)

    0 %

    -

    31.12.2018

    ex 2924 19 00

    50

    Acrylamide (CAS RN 79-06-1)

    0 %

    -

    31.12.2018

    ex 2924 19 00

    60

    N,N-Dimethylacrylamide (CAS RN 2680-03-7)

    0 %

    -

    31.12.2016

    ex 2924 19 00

    70

    Methylcarbamate (CAS RN 598-55-0)

    0 %

    -

    31.12.2018

    ex 2924 19 00

    80

    Tetrabutylurea (CAS RN 4559-86-8)

    0 %

    -

    31.12.2017

    ex 2924 21 00

    10

    4,4′-Dihydroxy-7,7′-ureylenedi(naphthalene-2-sulfonic acid) and its sodium salts

    0 %

    -

    31.12.2018

    ex 2924 21 00

    20

    (3-Aminophenyl)urea hydrochloride (CAS RN 59690-88-9)

    0 %

    -

    31.12.2018

    ex 2924 29 98

    10

    Alachlor (ISO), (CAS RN 15972-60-8)

    0 %

    -

    31.12.2018

    ex 2924 29 98

    12

    4-(Acetylamino)-2-aminobenzenesulphonic acid (CAS RN 88-64-2)

    0 %

    -

    31.12.2018

    ex 2924 29 98

    15

    Acetochlor (ISO), (CAS RN 34256-82-1)

    0 %

    -

    31.12.2018

    ex 2924 29 98

    17

    2-(Trifluoromethyl) benzamide (CAS RN 360-64-5)

    0 %

    -

    31.12.2019

    ex 2924 29 98

    19

    2-[[2-(Benzyloxycarbonylamino)acetyl]amino]propionic acid (CAS RN 3079-63-8)

    0 %

    -

    31.12.2019

    ex 2924 29 98

    20

    2-Chloro-N-(2-ethyl-6-methylphenyl)-N-(propan-2-yloxymethyl)acetamide (CAS RN 86763-47-5)

    0 %

    -

    31.12.2019

    ex 2924 29 98

    23

    Benalaxyl-M (ISO) (CAS RN 98243-83-5)

    0 %

    -

    31.12.2019

    ex 2924 29 98

    27

    2-Bromo-4-fluoroacetanilide (CAS RN 1009-22-9)

    0 %

    -

    31.12.2016

    ex 2924 29 98

    33

    N-(4-Amino-2-ethoxyphenyl)acetamide (CAS RN 848655-78-7)

    0 %

    -

    31.12.2019

    ex 2924 29 98

    37

    Beflubutamid (ISO) (CAS RN 113614-08-7)

    0 %

    -

    31.12.2018

     (7)ex 2924 29 98

    40

    N,N′-1,4-Phenylenebis[3-oxobutyramide], (CAS RN 24731-73-5)

    0 %

    -

    31.12.2020

    ex 2924 29 98

    43

    N,N′-(3,3′-Dimethylbiphenyl-4,4′-ylene)di(acetoacetamide) (CAS RN 91-96-3)

    0 %

    -

    31.12.2018

     (7)ex 2924 29 98

    45

    Propoxur (ISO) (CAS RN 114-26-1)

    0 %

    -

    31.12.2020

    ex 2924 29 98

    51

    Methyl 2-amino-4-[[(2,5-dichlorophenyl)amino]carbonyl]benzoate (CAS RN 59673-82-4)

    0 %

    -

    31.12.2017

    ex 2924 29 98

    53

    4-Amino-N-[4-(aminocarbonyl)phenyl]benzamide (CAS RN 74441-06-8)

    0 %

    -

    31.12.2017

     (7)ex 2924 29 98

    55

    N,N′-(2,5-Dimethyl-1,4-phenylene)bis[3-oxobutyramide], (CAS RN 24304-50-5)

    0 %

    -

    31.12.2020

     (7)ex 2924 29 98

    60

    N,N′-(2-Chloro-5-methyl-1,4-phenylene)bis[3-oxobutyramide], (CAS RN 41131-65-1)

    0 %

    -

    31.12.2020

    ex 2924 29 98

    63

    N-Ethyl-2-(isopropyl)-5-methylcyclohexanecarboxamide (CAS RN 39711-79-0)

    0 %

    -

    31.12.2016

    ex 2924 29 98

    65

    2-(4-Hydroxyphenyl)acetamide (CAS RN 17194-82-0)

    0 %

    -

    31.12.2018

    ex 2924 29 98

    73

    Napropamide (ISO) (CAS RN 15299-99-7)

    0 %

    -

    31.12.2019

    ex 2924 29 98

    75

    3-Amino-p-anisanilide (CAS RN 120-35-4)

    0 %

    -

    31.12.2018

    ex 2924 29 98

    80

    5′-Chloro-3-hydroxy-2′,4′-dimethoxy-2-naphthanilide (CAS RN 92-72-8)

    0 %

    -

    31.12.2018

    ex 2924 29 98

    85

    p-Aminobenzamide (CAS RN 2835-68-9)

    0 %

    -

    31.12.2018

    ex 2924 29 98

    86

    Anthranilamide of a purity by weight of 99,5 % or more (CAS RN 88-68-6)

    0 %

    -

    31.12.2017

    ex 2924 29 98

    87

    Paracetamol (INN) (CAS RN 103-90-2)

    0 %

    -

    31.12.2018

    ex 2924 29 98

    88

    5′-Chloro-3-hydroxy-2′-methyl-2-naphthanilide (CAS RN 135-63-7)

    0 %

    -

    31.12.2018

    ex 2924 29 98

    89

    Flutolanil (ISO) (CAS RN 66332-96-5)

    0 %

    -

    31.12.2018

    ex 2924 29 98

    91

    3-Hydroxy-2′-methoxy-2-naphthanilide (CAS RN 135-62-6)

    0 %

    -

    31.12.2018

    ex 2924 29 98

    92

    3-Hydroxy-2-naphthanilide (CAS RN 92-77-3)

    0 %

    -

    31.12.2019

    ex 2924 29 98

    93

    3-Hydroxy-2′-methyl-2-naphthanilide (CAS RN 135-61-5)

    0 %

    -

    31.12.2018

    ex 2924 29 98

    94

    2′-Ethoxy-3-hydroxy-2-naphthanilide (CAS RN 92-74-0)

    0 %

    -

    31.12.2018

    ex 2924 29 98

    97

    1,1-Cyclohexanediacetic acid monoamide (CAS RN 99189-60-3)

    0 %

    -

    31.12.2018

    ex 2925 11 00

    20

    Saccharin and its sodium salt

    0 %

    -

    31.12.2018

    ex 2925 19 95

    10

    N-Phenylmaleimide (CAS RN 941-69-5)

    0 %

    -

    31.12.2018

    ex 2925 19 95

    20

    4,5,6,7-Tetrahydroisoindole-1,3-dione (CAS RN 4720-86-9)

    0 %

    -

    31.12.2017

    ex 2925 19 95

    30

    N,N′-(m-Phenylene)dimaleimide (CAS RN 3006-93-7)

    0 %

    -

    31.12.2017

    ex 2925 29 00

    10

    Dicyclohexylcarbodiimide (CAS RN 538-75-0)

    0 %

    -

    31.12.2018

    ex 2925 29 00

    20

    N-[3-(Dimethylamino)propyl]-N′-ethylcarbodiimide hydrochloride (CAS RN 25952-53-8)

    0 %

    -

    31.12.2018

     (7)ex 2925 29 00

    30

    Guanidine sulphamate (CAS RN 50979-18-5)

    0 %

    -

    31.12.2020

    ex 2926 90 95

    12

    Cyfluthrin (ISO) (CAS RN 68359-37-5) with a purity by weight of 95 % or more

    0 %

    -

    31.12.2019

    ex 2926 90 95

    13

    alpha-Bromo-o-toluonitrile (CAS RN 22115-41-9)

    0 %

    -

    31.12.2018

    ex 2926 90 95

    16

    4-Cyano-2-nitrobenzoic acid methyl ester (CAS RN 52449-76-0)

    0 %

    -

    31.12.2019

    ex 2926 90 95

    20

    2-(m-Benzoylphenyl)propiononitrile (CAS RN 42872-30-0)

    0 %

    -

    31.12.2019

    ex 2926 90 95

    23

    Acrinathrin (ISO) (CAS RN 101007-06-1)

    0 %

    -

    31.12.2018

    ex 2926 90 95

    25

    2,2-Dibromo-3-nitrilopropionamide (CAS RN 10222-01-2)

    0 %

    -

    31.12.2016

    ex 2926 90 95

    27

    Cyhalofop-butyl (ISO) (CAS RN 122008-85-9)

    0 %

    -

    31.12.2018

    ex 2926 90 95

    50

    Alkyl or alkoxyalkyl esters of cyanoacetic acid

    0 %

    -

    31.12.2018

    ex 2926 90 95

    55

    Methyl-2-cyano-2-phenylbutyrate (CAS RN 24131-07-5)

    0 %

    -

    31.12.2016

    ex 2926 90 95

    61

    m-(1-Cyanoethyl)benzoic acid (CAS RN 5537-71-3)

    0 %

    -

    31.12.2016

    ex 2926 90 95

    64

    Esfenvalerate of a purity by weight of 83 % or more in a mixture of its own isomers (CAS RN 66230-04-4)

    0 %

    -

    31.12.2019

    ex 2926 90 95

    65

    Malononitrile (CAS RN 109-77-3)

    0 %

    -

    31.12.2018

    ex 2926 90 95

    70

    Methacrylonitrile (CAS RN 126-98-7)

    0 %

    -

    31.12.2019

    ex 2926 90 95

    74

    Chlorothalonil (ISO) (CAS RN 1897-45-6)

    0 %

    -

    31.12.2019

    ex 2926 90 95

    75

    Ethyl 2-cyano-2-ethyl-3-methylhexanoate (CAS RN 100453-11-0)

    0 %

    -

    31.12.2019

    ex 2926 90 95

    80

    Ethyl 2-cyano-2-phenylbutyrate (CAS RN 718-71-8)

    0 %

    -

    31.12.2018

    ex 2926 90 95

    86

    Ethylenediaminetetraacetonitrile (CAS RN 5766-67-6)

    0 %

    -

    31.12.2018

    ex 2926 90 95

    89

    Butyronitrile (CAS RN 109-74-0)

    0 %

    -

    31.12.2018

    ex 2927 00 00

    10

    2,2′-Dimethyl-2,2′-azodipropionamidine dihydrochloride

    0 %

    -

    31.12.2018

    ex 2927 00 00

    20

    4-Anilino-2-methoxybenzenediazonium hydrogen sulphate (CAS RN 36305-05-2)

    0 %

    -

    31.12.2018

    ex 2927 00 00

    30

    4′-Aminoazobenzene-4-sulphonic acid (CAS RN 104-23-4)

    0 %

    -

    31.12.2018

    ex 2927 00 00

    35

    C.C′-Azodi(formamide) (CAS RN 123-77-3) in the form of yellow powder with a decomposition temperature of 180 °C or more but not more than 220 °C used as a foaming agent in the manufacture of thermoplastic resins, elastomer and cross-linked polythene foam

    0 %

    -

    31.12.2019

    ex 2927 00 00

    60

    4,4′-Dicyano-4,4′-azodivaleric acid (CAS RN 2638-94-0)

    0 %

    -

    31.12.2018

    ex 2927 00 00

    80

    4-[(2,5-Dichlorophenyl)azo]-3-hydroxy-2-naphthoic acid (CAS RN 51867-77-7)

    0 %

    -

    31.12.2017

    ex 2928 00 90

    10

    3,3′-Bis(3,5-di-tert-butyl-4-hydroxyphenyl)-N,N′-bipropionamide (CAS RN 32687-78-8)

    0 %

    -

    31.12.2018

    ex 2928 00 90

    13

    Cymoxanil (ISO) (CAS RN 57966-95-7)

    0 %

    -

    31.12.2019

    ex 2928 00 90

    18

    Acetone oxime (CAS RN 127-06-0) of a purity by weight of 99 % or more

    0 %

    -

    31.12.2019

     (7)ex 2928 00 90

    25

    Acetaldehyde oxime in an aqueous solution (CAS RN 107-29-9)

    0 %

    -

    31.12.2020

    ex 2928 00 90

    30

    N-Isopropylhydroxylamine (CAS RN 5080-22-8)

    0 %

    -

    31.12.2016

    ex 2928 00 90

    35

    2-Chloro-N-methoxy-N-methylacetamide (CAS RN 67442-07-3)

    0 %

    -

    31.12.2018

    ex 2928 00 90

    40

    O-Ethylhydroxylamine, in the form of an aqueous solution (CAS RN 624-86-2)

    0 %

    -

    31.12.2018

    ex 2928 00 90

    45

    Tebufenozide (ISO) (CAS RN 112410-23-8)

    0 %

    -

    31.12.2018

     (7)ex 2928 00 90

    50

    Aqueous solution of 2,2′-(hydroxyimino) bisethanesulphonic acid disodium salt (CAS RN 133986-51-3) with a content by weight of more than 33,5 % but not more than 36,5 %

    0 %

    -

    31.12.2020

    ex 2928 00 90

    55

    Aminoguanidinium hydrogen carbonate (CAS RN 2582-30-1)

    0 %

    -

    31.12.2018

    ex 2928 00 90

    60

    Adipohydrazide (CAS RN 1071-93-8)

    0 %

    -

    31.12.2018

    ex 2928 00 90

    65

    2-Amino-3-(4-hydroxyphenyl) propanal semicarbazone hydrochloride

    0 %

    -

    31.12.2019

    ex 2928 00 90

    70

    Butanone oxime (CAS RN 96-29-7)

    0 %

    -

    31.12.2018

    ex 2928 00 90

    75

    Metaflumizone (ISO) (CAS RN 139968-49-3)

    0 %

    -

    31.12.2016

    ex 2928 00 90

    80

    Cyflufenamid (ISO) (CAS RN 180409-60-3)

    0 %

    -

    31.12.2018

    ex 2928 00 90

    85

    Daminozide (ISO) with a purity by weight of 99 % or more (CAS RN 1596-84-5)

    0 %

    -

    31.12.2016

    ex 2929 10 00

    10

    Methylenedicyclohexyl diisocyanates (CAS RN 28605-81-4)

    0 %

    -

    31.12.2018

    ex 2929 10 00

    15

    3,3′-Dimethylbiphenyl-4,4′-diyl diisocyanate (CAS RN 91-97-4)

    0 %

    -

    31.12.2019

    ex 2929 10 00

    20

    Butyl isocyanate (CAS RN 111-36-4)

    0 %

    -

    31.12.2017

    ex 2929 10 00

    40

    m-Isopropenyl-α , α-dimethylbenzyl isocyanate (CAS RN 2094-99-7)

    0 %

    -

    31.12.2018

    ex 2929 10 00

    50

    m-Phenylenediisopropylidene diisocyanate (CAS RN 2778-42-9)

    0 %

    -

    31.12.2018

     (7)ex 2929 10 00

    55

    2,5 (and 2,6)-Bis(isocyanatomethyl)bicyclo[2.2.1]heptane (CAS RN 74091-64-8)

    0 %

    -

    31.12.2016

    ex 2929 10 00

    60

    Trimethylhexamethylene diisocyanate, mixed isomers

    0 %

    -

    31.12.2018

    ex 2929 10 00

    80

    1,3-Bis(isocyanatomethyl)benzene (CAS RN 3634-83-1)

    0 %

    -

    31.12.2016

    ex 2930 20 00

    10

    Prosulfocarb (ISO) (CAS RN 52888-80-9)

    0 %

    -

    31.12.2017

    ex 2930 20 00

    20

    2-Isopropylethylthiocarbamate (CAS RN 141-98-0)

    0 %

    -

    31.12.2016

     (7)ex 2930 90 99

    10

    2,3-Bis((2-mercaptoethyl)thio)-1-propanethiol (CAS RN 131538-00-6)

    0 %

    -

    31.12.2020

    ex 2930 90 99

    13

    Mercaptamine hydrochloride (CAS RN 156-57-0)

    0 %

    -

    31.12.2016

    ex 2930 90 99

    14

    4-(Methylthio)benzaldehyde (CAS RN 3446-89-7)

    0 %

    -

    31.12.2018

    ex 2930 90 99

    15

    Ethoprophos (ISO) (CAS RN 13194-48-4)

    0 %

    -

    31.12.2018

    ex 2930 90 99

    16

    3-(Dimethoxymethylsilyl)-1-propanethiol (CAS RN 31001-77-1)

    0 %

    -

    31.12.2019

    ex 2930 90 99

    17

    2-(3-Aminophenylsulphonyl)ethyl hydrogen sulphate (CAS RN 2494-88-4)

    0 %

    -

    31.12.2018

    ex 2930 90 99

    18

    1-Methyl-5-[3-methyl-4-[4-[(trifluoromethyl)thio]phenoxy]phenyl]biuret (CAS RN 106310-17-2)

    0 %

    -

    31.12.2016

    ex 2930 90 99

    21

    [2,2′-Thio-bis(4-tert-octylphenolato)]-n-butylamine nickel (CAS RN 14516-71-3)

    0 %

    -

    31.12.2016

    ex 2930 90 99

    23

    Dimethyl [(methylsulphanyl)methylylidene]biscarbamate (CAS RN 34840-23-8)

    0 %

    -

    31.12.2018

    ex 2930 90 99

    25

    Thiophanate-methyl (ISO), (CAS RN 23564-05-8)

    0 %

    -

    31.12.2018

    ex 2930 90 99

    27

    2-[(4-Amino-3-methoxyphenyl)sulphonyl]ethyl hydrogen sulphate (CAS RN 26672-22-0)

    0 %

    -

    31.12.2019

    ex 2930 90 99

    30

    4-(4-Isopropoxyphenylsulphonyl)phenol (CAS RN 95235-30-6)

    0 %

    -

    31.12.2018

    ex 2930 90 99

    33

    2-Amino-5-{[2-(sulfooxy)ethyl]sulfonyl}benzenesulfonIc acid (CAS RN 42986-22-1)

    0 %

    -

    31.12.2019

    ex 2930 90 99

    35

    Glutathione (CAS RN 70-18-8)

    0 %

    -

    31.12.2016

    ex 2930 90 99

    37

    Ethanethioamide (CAS RN 62-55-5)

    0 %

    -

    31.12.2018

    ex 2930 90 99

    40

    3,3′-Thiodi(propionic acid) (CAS RN 111-17-1)

    0 %

    -

    31.12.2018

    ex 2930 90 99

    43

    Trimethylsulfoxonium iodide (CAS RN 1774-47-6)

    0 %

    -

    31.12.2018

    ex 2930 90 99

    45

    2-[(p-Aminophenyl)sulphonyl]ethyl hydrogen sulphate (CAS RN 2494-89-5)

    0 %

    -

    31.12.2018

     (7)ex 2930 90 99

    53

    Bis(4-chlorophenyl) sulphone (CAS RN 80-07-9)

    0 %

    -

    31.12.2020

     (7)ex 2930 90 99

    55

    Thiourea (CAS RN 62-56-6)

    0 %

    -

    31.12.2020

     (7)ex 2930 90 99

    57

    Methyl (methylthio)acetate (CAS RN 16630-66-3)

    0 %

    -

    31.12.2020

    ex 2930 90 99

    60

    Methyl phenyl sulphide (CAS RN 100-68-5)

    0 %

    -

    31.12.2018

    ex 2930 90 99

    64

    3-Chloro-2-methylphenyl methyl sulphide (CAS RN 82961-52-2)

    0 %

    -

    31.12.2019

     (7)ex 2930 90 99

    65

    Pentaerythritol tetrakis(3-mercaptopropionate) (CAS RN 7575-23-7)

    0 %

    -

    31.12.2016

    ex 2930 90 99

    66

    Diphenyl sulphide (CAS RN 139-66-2)

    0 %

    -

    31.12.2017

    ex 2930 90 99

    67

    3-Bromomethyl-2-chloro-4-(methylsulphonyl)-benzoic acid (CAS RN 120100-05-2)

    0 %

    -

    31.12.2018

    ex 2930 90 99

    68

    Clethodim (ISO) (CAS RN 99129-21-2)

    0 %

    -

    31.12.2017

    ex 2930 90 99

    77

    4-[4-(2-Propenyloxy)phenylsulphonyl]phenol (CAS RN 97042-18-7)

    0 %

    -

    31.12.2018

    ex 2930 90 99

    78

    4-Mercaptomethyl-3,6-dithia-1,8-octanedithiol (CAS RN 131538-00-6)

    0 %

    -

    31.12.2016

    ex 2930 90 99

    80

    Captan (ISO) (CAS RN 133-06-2)

    0 %

    -

    31.12.2018

    ex 2930 90 99

    81

    Disodium hexamethylene-1,6-bisthiosulfate dihydrate (CAS RN 5719-73-3)

    3%

    -

    31.12.2019

    ex 2930 90 99

    83

    Methyl-p-tolyl sulphone (CAS RN 3185-99-7)

    0 %

    -

    31.12.2017

    ex 2930 90 99

    87

    3-Sulphinobenzoic acid (CAS RN 15451-00-0)

    0 %

    -

    31.12.2018

    ex 2930 90 99

    89

    Potassium- or sodium-salt of O-ethyl-, O-isopropyl-, O-butyl-, O-isobutyl- or O-pentyl-dithiocarbonates

    0 %

    -

    31.12.2016

    ex 2931 90 80

    03

    Butylethylmagnesium (CAS RN 62202-86-2), in the form of a solution in heptane

    0 %

    -

    31.12.2018

     (7)ex 2931 90 80

    05

    Diethylmethoxyborane (CAS RN 7397-46-8), whether or not in the form of a solution in tetrahydrofuran according to note 1e to Chapter 29 of the CN

    0 %

    -

    31.12.2020

    ex 2931 90 80

    08

    Sodium diisobutyldithiophosphinate (CAS RN 13360-78-6) in an aqueous solution

    0 %

    -

    31.12.2017

    ex 2931 90 80

    13

    Trioctylphosphine oxide (CAS RN 78-50-2)

    0 %

    -

    31.12.2016

    ex 2931 90 80

    15

    Methylcyclopentadienyl manganese tricarbonyl containing not more than 4,9 % by weight of cyclopentadienyl manganese tricarbonyl (CAS RN 12108-13-3)

    0 %

    -

    31.12.2019

    ex 2931 90 80

    18

    Methyl tris (2-pentanoneoxime) silane (CAS RN 37859-55-5)

    0 %

    -

    31.12.2019

    ex 2931 90 80

    23

    Di-tert-butylphosphane (CAS RN 819-19-2)

    0 %

    -

    31.12.2018

    ex 2931 90 80

    25

    (Z)-Prop-1-en-1-ylphosphonic acid (CAS RN 25383-06-6)

    0 %

    -

    31.12.2017

    ex 2931 90 80

    28

    N-(Phosphonomethyl)iminodiacetic acid (CAS RN 5994-61-6)

    0 %

    -

    31.12.2019

    ex 2931 90 80

    30

    Bis(2,4,4-trimethylpentyl)phosphinic acid (CAS RN 83411-71-6)

    0 %

    -

    31.12.2018

    ex 2931 90 80

    33

    Dimethyl[dimethylsilyldiindenyl]hafnium (CAS RN 220492-55-7)

    0 %

    -

    31.12.2019

    ex 2931 90 80

    35

    N,N-Dimethylanilinium tetrakis(pentafluorophenyl)borate (CAS RN 118612-00-3)

    0 %

    -

    31.12.2019

    ex 2931 90 80

    38

    Phenylphosphonic dichloride (CAS RN 824-72-6)

    0 %

    -

    31.12.2016

    ex 2931 90 80

    40

    Tetrakis(hydroxymethyl)phosphonium chloride (CAS RN 124-64-1)

    0 %

    -

    31.12.2016

    ex 2931 90 80

    43

    Mixture of the isomers 9-icosyl-9-phosphabicyclo[3.3.1]nonane and 9-icosyl-9-phosphabicyclo[4.2.1]nonane

    0 %

    -

    31.12.2018

    ex 2931 90 80

    45

    Tris(4-methylpentan-2-oximino)methylsilane (CAS RN 37859-57-7)

    0 %

    -

    31.12.2018

    ex 2931 90 80

    48

    Tetrabutylphosphonium acetate in the form of an aqueous solution (CAS RN 30345-49-4)

    0 %

    -

    31.12.2019

    ex 2931 90 80

    50

    Trimethylsilane (CAS RN 993-07-7)

    0 %

    -

    31.12.2016

    ex 2931 90 80

    53

    Trimethylborane (CAS RN 593-90-8)

    0 %

    -

    31.12.2019

    ex 2931 90 80

    55

    3-(Hydroxyphenylphosphinoyl)propionic acid (CAS RN 14657-64-8)

    0 %

    -

    31.12.2018

     (7)ex 2931 90 80

    57

    Trimethyl phosphonoacetate (CAS RN 5927-18-4)

    0 %

    -

    31.12.2020

    ex 2932 13 00

    10

    Tetrahydrofurfuryl alcohol (CAS RN 97-99-4)

    0 %

    -

    31.12.2018

    ex 2932 19 00

    40

    Furan (CAS RN 110-00-9) of a purity by weight of 99 % or more

    0 %

    -

    31.12.2019

    ex 2932 19 00

    41

    2,2 Di(tetrahydrofuryl)propane (CAS RN 89686-69-1)

    0 %

    -

    31.12.2019

    ex 2932 19 00

    45

    1,6-Dichloro-1,6-dideoxy-β-D-fructofuranosyl-4-chloro-4 deoxy-α-D-galactopyranoside (CAS RN 56038-13-2)

    0 %

    -

    31.12.2019

    ex 2932 19 00

    70

    Furfurylamine (CAS RN 617-89-0)

    0 %

    -

    31.12.2019

    ex 2932 19 00

    75

    Tetrahydro-2-methylfuran (CAS RN 96-47-9)

    0 %

    -

    31.12.2018

    ex 2932 19 00

    80

    5-Nitrofurfurylidene di(acetate) (CAS RN 92-55-7)

    0 %

    -

    31.12.2016

    ex 2932 20 90

    10

    2′-Anilino-6′-[ethyl(isopentyl)amino]-3′-methylspiro[isobenzofuran-1(3H),9′-xanthen]-3-one (CAS RN 70516-41-5)

    0 %

    -

    31.12.2018

    ex 2932 20 90

    15

    Coumarin (CAS RN 91-64-5)

    0 %

    -

    31.12.2016

    ex 2932 20 90

    20

    Ethyl 6′-(diethylamino)-3-oxo-3H-spiro[2-benzofuran-1,9′-xanthene]-2′-carboxylate (CAS RN 154306-60-2)

    0 %

    -

    31.12.2017

    ex 2932 20 90

    35

    6′-Diethylamino-3′-methyl-2′-(2,4-xylidino)spiro[isobenzofuran-1(3H),9′-xanthen]-3-one (CAS RN 36431-22-8)

    0 %

    -

    31.12.2018

    ex 2932 20 90

    40

    (S)-(-)-α-Amino-γ-butyrolactonehydrobromide (CAS RN 15295-77-9)

    0 %

    -

    31.12.2017

    ex 2932 20 90

    45

    2,2-Dimethyl-1,3-dioxane-4,6-dione (CAS RN 2033-24-1)

    0 %

    -

    31.12.2018

    ex 2932 20 90

    55

    6-Dimethylamino-3,3-bis(4-dimethylaminophenyl)phthalide (CAS RN 1552-42-7)

    0 %

    -

    31.12.2018

    ex 2932 20 90

    60

    6′-(Diethylamino)-3′-methyl-2′-(phenylamino)-spiro[isobenzofuran-1(3H),9′-[9H]xanthen]-3-one (CAS RN 29512-49-0)

    0 %

    -

    31.12.2016

     (7)ex 2932 20 90

    65

    Sodium 4-(methoxycarbonyl)-5-oxo-2,5-dihydrofuran-3-olate (CAS RN 1134960-41-0)

    0 %

    -

    31.12.2020

    ex 2932 20 90

    70

    3′,6′-Bis(ethylamino)-2′,7′-dimethylspiro[isobenzofuran-1(3H),9′-[9H]-xanthen]-3-one, (CAS RN 41382-37-0)

    0 %

    -

    31.12.2018

    ex 2932 20 90

    71

    6′-(Dibutylamino)-3′-methyl-2′-(phenylamino)-spiro[isobenzofuran-1(3H),9′-[9H]xanthen]-3-one (CAS RN 89331-94-2)

    0 %

    -

    31.12.2016

    ex 2932 20 90

    72

    2′-[Bis(phenylmethyl)amino]-6′-(diethylamino)-spiro[isobenzofuran-1(3H),9′-[9H]xanthen]-3-one (CAS RN 34372-72-0)

    0 %

    -

    31.12.2016

    ex 2932 20 90

    80

    Gibberellic acid with a minimum purity by weight of 88 % (CAS RN 77-06-5)

    0 %

    -

    31.12.2018

    ex 2932 20 90

    84

    Decahydro-3a,6,6,9a-tetramethylnaphth [2,1-b] furan-2 (1H)-one (CAS RN 564-20-5)

    0 %

    -

    31.12.2018

    ex 2932 99 00

    10

    Bendiocarb (ISO) (CAS RN 22781-23-3)

    0 %

    -

    31.12.2018

    ex 2932 99 00

    15

    1,3,4,6,7,8-Hexahydro-4,6,6,7,8,8-hexamethylindeno[5,6-c]pyran (CAS RN 1222-05-5)

    0 %

    -

    31.12.2016

    ex 2932 99 00

    20

    Ethyl-2-methyl-1,3-dioxolane-2-acetate (CAS RN 6413-10-1)

    0 %

    -

    31.12.2016

    ex 2932 99 00

    25

    1-(2,2-Difluorobenzo[d][1,3]dioxol-5-yl)cyclopropanecarboxylic acid (CAS RN 862574-88-7)

    0 %

    -

    31.12.2017

    ex 2932 99 00

    43

    Ethofumesate (ISO) (CAS RN 26225-79-6) with a purity by weight of 97 % or more

    0 %

    -

    31.12.2019

    ex 2932 99 00

    45

    2-Butylbenzofuran (CAS RN 4265-27-4)

    0 %

    -

    31.12.2018

     (7)ex 2932 99 00

    50

    7-Methyl-3,4-dihydro-2H-1,5-benzodioxepin-3-one (CAS RN 28940-11-6)

    0 %

    -

    31.12.2020

    ex 2932 99 00

    53

    1,3-Dihydro-1,3-dimethoxyisobenzofurane (CAS RN 24388-70-3)

    0 %

    -

    31.12.2018

    ex 2932 99 00

    55

    6-Fluoro-3,4-dihydro-2H-1-benzopyran-2-carboxylic acid (CAS RN 99199-60-7)

    0 %

    -

    31.12.2018

    ex 2932 99 00

    70

    1,3:2,4-bis-O-Benzylidene-D-glucitol (CAS RN 32647-67-9)

    0 %

    -

    31.12.2016

    ex 2932 99 00

    75

    3-(3,4-Methylenedioxyphenyl)-2-methylpropanal (CAS RN 1205-17-0)

    0 %

    -

    31.12.2016

    ex 2932 99 00

    80

    1,3:2,4-bis-O-(4-Methylbenzylidene)-D-glucitol (CAS RN 81541-12-0)

    0 %

    -

    31.12.2016

    ex 2933 19 90

    15

    Pyrasulfotole (ISO) (CAS RN 365400-11-9) with a purity by weight of 96 % or more

    0 %

    -

    31.12.2019

    ex 2933 19 90

    25

    3-Difluoromethyl-1-methyl-1H-pyrazole-4-carboxylic acid (CAS RN 176969-34-9)

    0 %

    -

    31.12.2019

    ex 2933 19 90

    30

    3-Methyl-1-p-tolyl-5-pyrazolone (CAS RN 86-92-0)

    0 %

    -

    31.12.2018

     (7)ex 2933 19 90

    35

    1,3-Dimethyl-5-fluoro-1H-pyrazole-4-carbonyl fluoride (CAS RN 191614-02-5)

    0 %

    -

    31.12.2020

    ex 2933 19 90

    40

    Edaravone (INN) (CAS RN 89-25-8)

    0 %

    -

    31.12.2018

    ex 2933 19 90

    50

    Fenpyroximate (ISO) (CAS RN 134098-61-6)

    0 %

    -

    31.12.2019

    ex 2933 19 90

    60

    Pyraflufen-ethyl (ISO) (CAS RN 129630-19-9)

    0 %

    -

    31.12.2019

    ex 2933 19 90

    70

    4,5-Diamino-1-(2-hydroxyethyl)-pyrazolsulphate (CAS RN 155601-30-2)

    0 %

    -

    31.12.2018

    ex 2933 19 90

    80

    3-(4,5-Dihydro-3-methyl-5-oxo-1H-pyrazol-1-yl)benzenesulphonic acid (CAS RN 119-17-5)

    0 %

    -

    31.12.2017

    ex 2933 19 90

    85

    Allyl 5-amino-4-(2-methylphenyl)-3-oxo-2,3-dihydro-1H-1-pyrazolcarbothioate (CAS RN 473799-16-5)

    0 %

    -

    31.12.2017

     (7)ex 2933 21 00

    35

    Iprodione (ISO) (CAS RN 36734-19-7) with a purity by weight of 97 % or more

    0 %

    -

    31.12.2020

    ex 2933 21 00

    50

    1-Bromo-3-chloro-5,5-dimethylhydantoin (CAS RN 16079-88-2)/(CAS RN 32718-18-6)

    0 %

    -

    31.12.2016

    ex 2933 21 00

    60

    DL-p-Hydroxyphenylhydantoin (CAS RN 2420-17-9)

    0 %

    -

    31.12.2016

    ex 2933 21 00

    70

    α-(4-Methoxybenzoyl)-α-(1-benzyl-5-ethoxy-3-hydantoinyl)-2-chloro-5-dodecyloxycarbonylacetanilide, (CAS RN 70950-45-7)

    0 %

    -

    31.12.2016

     (7)ex 2933 21 00

    80

    5,5-Dimethylhydantoin (CAS RN 77-71-4)

    0 %

    -

    31.12.2020

    ex 2933 29 90

    15

    Ethyl 4-(1-hydroxy-1-methylethyl)-2-propylimidazole-5-carboxylate (CAS RN 144689-93-0)

    0 %

    -

    31.12.2018

    ex 2933 29 90

    25

    Prochloraz (ISO) (CAS RN 67747-09-5)

    0 %

    -

    31.12.2018

    ex 2933 29 90

    35

    1-Trityl-4-formylimidazole (CAS RN 33016-47-6)

    0 %

    -

    31.12.2018

    ex 2933 29 90

    40

    Triflumizole (ISO) (CAS RN 68694-11-1)

    0 %

    -

    31.12.2019

    ex 2933 29 90

    45

    Prochloraz copper chloride (ISO) (CAS RN 156065-03-1)

    0 %

    -

    31.12.2018

    ex 2933 29 90

    50

    1,3-Dimethylimidazolidin-2-one (CAS RN 80-73-9)

    0 %

    -

    31.12.2018

    ex 2933 29 90

    55

    Fenamidone (ISO) (CAS RN 161326-34-7) with a purity by weight of 97 % or more

    0 %

    -

    31.12.2019

    ex 2933 29 90

    60

    1-Cyano-2-methyl-1-[2-(5-methylimidazol-4-ylmethylthio)ethyl]isothiourea (CAS RN 52378-40-2)

    0 %

    -

    31.12.2016

    ex 2933 29 90

    70

    Cyazofamid (ISO) (CAS RN 120116-88-3)

    0 %

    -

    31.12.2016

    ex 2933 29 90

    80

    Imazalil (ISO) (CAS RN 35554-44-0)

    0 %

    -

    31.12.2017

    2933 39 50

     

    Fluroxypyr (ISO) methyl ester (CAS RN 69184-17-4)

    0 %

    -

    31.12.2019

    ex 2933 39 99

    11

    2-(Chloromethyl)-4-(3-methoxypropoxy)-3-methylpyridine hydrochloride(CAS RN 153259-31-5)

    0 %

    -

    31.12.2019

    ex 2933 39 99

    12

    2,3-Dichloropyridine (CAS RN 2402-77-9)

    0 %

    -

    31.12.2017

    ex 2933 39 99

    15

    Pyridine-2,3-dicarboxylic acid (CAS RN 89-00-9)

    0 %

    -

    31.12.2018

    ex 2933 39 99

    18

    6-Chloro-3-nitropyridin-2-ylamine (CAS RN 27048-04-0)

    0 %

    -

    31.12.2017

     (7)ex 2933 39 99

    20

    Copper pyrithione powder (CAS RN 14915-37-8)

    0 %

    -

    31.12.2020

    ex 2933 39 99

    21

    Boscalid (ISO) (CAS RN 188425-85-6)

    0 %

    -

    31.12.2019

    ex 2933 39 99

    22

    Isonicotinic acid (CAS RN 55-22-1)

    0 %

    -

    31.12.2019

    ex 2933 39 99

    24

    2-Chloromethyl-4-methoxy-3,5-dimethylpyridine hydrochloride (CAS RN 86604-75-3)

    0 %

    -

    31.12.2019

    ex 2933 39 99

    25

    Imazethapyr (ISO) (CAS RN 81335-77-5)

    0 %

    -

    31.12.2018

    ex 2933 39 99

    28

    Ethyl-3-[(3-amino-4-methylamino-benzoyl)-pyridin-2-yl-amino]-propionate (CAS RN 212322-56-0)

    0 %

    -

    31.12.2019

    ex 2933 39 99

    31

    2-(Chloromethyl)-3-methyl-4-(2,2,2-trifluoroethoxy)pyridine hydrochloride(CAS RN 127337-60-4)

    0 %

    -

    31.12.2019

    ex 2933 39 99

    32

    2-(Chloromethyl)-3,4-dimethoxypyridine hydrochloride (CAS RN 72830-09-2)

    0 %

    -

    31.12.2016

    ex 2933 39 99

    34

    3-Chloro-(5-trifluoromethyl)-2-pyridineacetonitrile (CAS RN 157764-10-8)

    0 %

    -

    31.12.2019

    ex 2933 39 99

    35

    Aminopyralid (ISO) (CAS RN 150114-71-9)

    0 %

    -

    31.12.2018

    ex 2933 39 99

    37

    Aqueous solution of pyridine-2-thiol-1-oxide, sodium salt (CAS RN 3811-73-2)

    0 %

    -

    31.12.2016

    ex 2933 39 99

    40

    2-Chloropyridine (CAS RN 109-09-1)

    0 %

    -

    31.12.2018

    ex 2933 39 99

    42

    2,2,6,6-Tetramethylpiperidine (CAS RN 768-66-1)

    0 %

    -

    31.12.2016

    ex 2933 39 99

    45

    5-Difluoromethoxy-2-[[(3,4-dimethoxy-2-pyridyl)methyl]thio]-1H-benzimidazole (CAS RN 102625-64-9)

    0 %

    -

    31.12.2019

     (7)ex 2933 39 99

    47

    (-)-trans-4-(4′-Fluorophenyl)-3-hydroxymethyl-N-methylpiperidine (CAS RN 105812-81-5)

    0 %

    -

    31.12.2016

    ex 2933 39 99

    48

    Flonicamid (ISO) (CAS RN 158062-67-0)

    0 %

    -

    31.12.2019

    ex 2933 39 99

    50

    N-Fluoro-2,6-dichloropyridinium tetrafluoroborate (CAS RN 140623-89-8)

    0 %

    -

    31.12.2016

    ex 2933 39 99

    53

    3-Bromopyridine (CAS RN 626-55-1)

    0 %

    -

    31.12.2018

    ex 2933 39 99

    55

    Pyriproxyfen (ISO) (CAS RN 95737-68-1) of a purity by weight of 97 % or more

    0 %

    -

    31.12.2019

    ex 2933 39 99

    57

    Tert-butyl 3-(6-amino-3-methylpyridin-2-yl)benzoate (CAS RN 1083057-14-0)

    0 %

    -

    31.12.2017

    ex 2933 39 99

    58

    4-Chloro-1-methylpiperidine (CAS RN 5570-77-4)

    0 %

    -

    31.12.2018

    ex 2933 39 99

    60

    2-Fluoro-6-(trifluoromethyl)pyridine (CAS RN 94239-04-0)

    0 %

    -

    31.12.2018

    ex 2933 39 99

    63

    2-Aminomethyl-3-chloro-5-trifluoromethylpyridine hydrochloride (CAS RN 326476-49-7)

    0 %

    -

    31.12.2018

    ex 2933 39 99

    65

    Acetamiprid (ISO) (CAS RN 135410-20-7)

    0 %

    -

    31.12.2018

    ex 2933 39 99

    67

    (1R,3S,4S)-tert-Butyl 3-(6-bromo-1H-benzo[d]imidazol-2-yl)-2-azabicyclo[2.2.1]heptane-2-carboxylate (CAS RN 1256387-74-2)

    0 %

    -

    31.12.2018

    ex 2933 39 99

    70

    2,3-Dichloro-5-trifluoromethylpyridine (CAS RN 69045-84-7)

    0 %

    -

    31.12.2016

    ex 2933 39 99

    72

    5,6-Dimethoxy-2-[(4-piperidinyl)methyl]indan-1-one (CAS RN 120014-30-4)

    0 %

    -

    31.12.2016

    ex 2933 39 99

    77

    Imazamox (ISO) (CAS RN 114311-32-9)

    0 %

    -

    31.12.2018

     (7)ex 2933 39 99

    85

    2-Chloro-5-chloromethylpyridine (CAS RN 70258-18-3)

    0 %

    -

    31.12.2020

    ex 2933 49 10

    10

    Quinmerac (ISO) (CAS RN 90717-03-6)

    0 %

    -

    31.12.2018

    ex 2933 49 10

    20

    3-Hydroxy-2-methylquinoline-4-carboxylic acid (CAS RN 117-57-7)

    0 %

    -

    31.12.2018

    ex 2933 49 10

    30

    Ethyl 4-oxo-1,4-dihydroquinoline-3-carboxylate (CAS RN 52980-28-6)

    0 %

    -

    31.12.2017

    ex 2933 49 10

    40

    4,7-Dichloroquinoline (CAS RN 86-98-6)

    0 %

    -

    31.12.2019

     (7)ex 2933 49 90

    30

    Quinoline (CAS RN 91-22-5)

    0 %

    -

    31.12.2020

     (7)ex 2933 49 90

    35

    [1-(4-Benzyloxy-benzyl)-2-cyclobutylmethyl-octahydro-isoquinoline-4a,8a-diol] (CUS 0141126-3)

    0 %

    -

    31.12.2020

     (7)ex 2933 49 90

    40

    Isoquinoline (CAS RN 119-65-3)

    0 %

    -

    31.12.2020

    ex 2933 49 90

    70

    Quinolin-8-ol (CAS RN 148-24-3)

    0 %

    -

    31.12.2018

    ex 2933 49 90

    80

    Ethyl 6,7,8-trifluoro-1-[formyl(methyl)amino]-4-oxo-1,4-dihydroquinoline-3-carboxylate (CAS RN 100276-65-1)

    0 %

    -

    31.12.2018

    ex 2933 52 00

    10

    Malonylurea (barbituric acid) (CAS RN 67-52-7)

    0 %

    -

    31.12.2016

    ex 2933 59 95

    10

    6-Amino-1,3-dimethyluracil (CAS RN 6642-31-5)

    0 %

    -

    31.12.2019

    ex 2933 59 95

    13

    2-Diethylamino-6-hydroxy-4-methylpyrimidine (CAS RN 42487-72-9)

    0 %

    -

    31.12.2018

    ex 2933 59 95

    15

    Sitagliptin phosphate monohydrate (CAS RN 654671-77-9)

    0 %

    -

    31.12.2018

    ex 2933 59 95

    17

    N,N′-(4,6-Dichloropyrimidine-2,5-diyl)diformamide (CAS RN 116477-30-6)

    0 %

    -

    31.12.2018

    ex 2933 59 95

    20

    2,4-Diamino-6-chloropyrimidine (CAS RN 156-83-2)

    0 %

    -

    31.12.2018

    ex 2933 59 95

    23

    6-Chloro-3-methyluracil (CAS RN 4318-56-3)

    0 %

    -

    31.12.2018

    ex 2933 59 95

    27

    2-[(2-Amino-6-oxo-1,6-dihydro-9H-purin-9-yl)methoxy]-3-hydroxypropylacetate (CAS RN 88110-89-8)

    0 %

    -

    31.12.2018

    ex 2933 59 95

    30

    Mepanipyrim (ISO) (CAS RN 110235-47-7)

    0 %

    -

    31.12.2018

    ex 2933 59 95

    33

    4,6-Dichloro-5-fluoropyrimidine (CAS RN 213265-83-9)

    0 %

    -

    31.12.2019

    ex 2933 59 95

    37

    6-Iodo-3-propyl-2-thioxo-2,3-dihydroquinazolin-4(1H)-one (CAS RN 200938-58-5)

    0 %

    -

    31.12.2019

    ex 2933 59 95

    43

    2-(4-(2-Hydroxyethyl)piperazin-1-yl)ethanesulfonic acid (CAS RN 7365-45-9)

    0 %

    -

    31.12.2019

    ex 2933 59 95

    45

    1-[3-(Hydroxymethyl)pyridin-2-yl]-4-methyl-2-phenylpiperazine (CAS RN 61337-89-1)

    0 %

    -

    31.12.2019

     (7)ex 2933 59 95

    47

    6-Methyl-2-oxoperhydropyrimidin-4-ylurea (CAS RN 1129-42-6) with a purity of 94 % or more

    0 %

    -

    31.12.2020

    ex 2933 59 95

    50

    2-(2-Piperazin-1-ylethoxy)ethanol (CAS RN 13349-82-1)

    0 %

    -

    31.12.2019

     (7)ex 2933 59 95

    53

    5-Fluoro-2-methoxypyrimidin-4(3H)-one (CAS RN 1480-96-2)

    0 %

    -

    31.12.2020

     (7)ex 2933 59 95

    57

    5,7-Dimethoxy(1,2,4)triazolo(1,5-a)pyrimidin-2-amine (CAS RN 13223-43-3)

    0 %

    -

    31.12.2020

    ex 2933 59 95

    60

    2,6-Dichloro-4,8-dipiperidinopyrimido[5,4-d]pyrimidine (CAS RN 7139-02-8)

    0 %

    -

    31.12.2018

    ex 2933 59 95

    65

    1-Chloromethyl-4-fluoro-1,4-diazoniabicyclo[2.2.2]octane bis(tetrafluoroborate) (CAS RN 140681-55-6)

    0 %

    -

    31.12.2019

    ex 2933 59 95

    70

    N-(4-Ethyl-2,3-dioxopiperazin-1-ylcarbonyl)-D-2-phenylglycine (CAS RN 63422-71-9)

    0 %

    -

    31.12.2018

    ex 2933 59 95

    72

    Triacetylganciclovir (CAS RN 86357-14-4)

    0 %

    -

    31.12.2016

    ex 2933 59 95

    75

    (2R,3S/2S,3R)-3-(6-Chloro-5-fluoro pyrimidin-4-yl)-2-(2,4-difluorophenyl)-1-(1H-1,2,4-triazol-1-yl)butan-2-ol hydrochloride, (CAS RN 188416-20-8)

    0 %

    -

    31.12.2019

    ex 2933 59 95

    77

    3-(Trifluoromethyl)-5,6,7,8-tetrahydro[1,2,4]triazolo[4,3-a]pyrazine hydrochloride (1:1) (CAS RN 762240-92-6)

    0 %

    -

    31.12.2017

     (7)ex 2933 69 80

    10

    1,3,5-Triazinane-2,4,6-trione-1,3,5-triazine-2,4,6-triamine(1:1) (CAS RN 37640-57-6)

    0 %

    -

    31.12.2020

     (7)ex 2933 69 80

    15

    2-Chloro-4,6-dimethoxy-1,3,5-triazine (CAS RN 3140-73-6)

    0 %

    -

    31.12.2020

    ex 2933 69 80

    25

    1,3,5-Triazine-2,4,6-triamine monophosphate (CAS RN 20208-95-1)

    0 %

    -

    31.12.2016

    ex 2933 69 80

    40

    Troclosene sodium (INNM) (CAS RN 2893-78-9)

    0 %

    -

    31.12.2016

    ex 2933 69 80

    50

    1,3,5-Tris(2,3-dibromopropyl)-1,3,5-triazinane-2,4,6-trione (CAS RN 52434-90-9)

    0 %

    -

    31.12.2018

     (7)ex 2933 69 80

    55

    Terbutryn (ISO) (CAS RN 886-50-0)

    0 %

    -

    31.12.2020

     (7)ex 2933 69 80

    60

    Cyanuric acid (CAS RN 108-80-5)

    0 %

    -

    31.12.2020

    ex 2933 69 80

    65

    1,3,5-Triazine-2,4,6(1H,3H,5H)-trithione, trisodium salt (CAS RN 17766-26-6)

    0 %

    -

    31.12.2018

    ex 2933 69 80

    75

    Metamitron (ISO) (CAS RN 41394-05-2)

    0 %

    -

    31.12.2019

    ex 2933 69 80

    80

    Tris(2-hydroxyethyl)-1,3,5-triazinetrione (CAS RN 839-90-7)

    0 %

    -

    31.12.2018

    ex 2933 79 00

    30

    5-Vinyl-2-pyrrolidone (CAS RN 7529-16-0)

    0 %

    -

    31.12.2017

    ex 2933 79 00

    50

    6-Bromo-3-methyl-3H-dibenz(f,ij)isoquinoline-2,7-dione (CAS RN 81-85-6)

    0 %

    -

    31.12.2018

    ex 2933 79 00

    60

    3,3-Pentamethylene-4-butyrolactam (CAS RN 64744-50-9)

    0 %

    -

    31.12.2019

     (7)ex 2933 79 00

    70

    (S)-N-[(Diethylamino)methyl]-alpha-ethyl-2-oxo-1-pyrrolidineacetamide L-(+)-tartrate, (CAS RN 754186-36-2)

    0 %

    -

    31.12.2020

    ex 2933 99 80

    10

    2-(2H-Benzotriazol-2-yl)-4,6-di-tert-butylphenol (CAS RN 3846-71-7)

    0 %

    -

    31.12.2018

    ex 2933 99 80

    11

    Fenbuconazole (ISO) (CAS RN 114369-43-6)

    0 %

    -

    31.12.2019

    ex 2933 99 80

    12

    Myclobutanil (ISO) (CAS RN 88671-89-0)

    0 %

    -

    31.12.2019

    ex 2933 99 80

    13

    5-Difluoromethoxy-2-mercapto-1-H-benzimidazole (CAS RN 97963-62-7)

    0 %

    -

    31.12.2016

    ex 2933 99 80

    14

    2-(2H-benzotriazol-2-yl)-4-methyl-6-(2-methylprop-2-en-1-yl)phenol(CAS RN 98809-58-6)

    0 %

    -

    31.12.2018

    ex 2933 99 80

    15

    2-(2H-Benzotriazol-2-yl)-4,6-di-tert-pentylphenol (CAS RN 25973-55-1)

    0 %

    -

    31.12.2018

    ex 2933 99 80

    18

    4,4′-[(9-Butyl-9H-carbazol-3-yl)methylene]bis[N-methyl-N-phenylaniline] (CAS RN 67707-04-4)

    0 %

    -

    31.12.2017

    ex 2933 99 80

    19

    2-(2,4-Dichlorophenyl)-3-(1H-1,2,4-triazol-1-yl)propan-1-ol (CAS RN 112281-82-0)

    0 %

    -

    31.12.2019

    ex 2933 99 80

    20

    2-(2H-Benzotriazol-2-yl)-4,6-bis(1-methyl-1-phenylethyl)phenol (CAS RN 70321-86-7)

    0 %

    -

    31.12.2018

    ex 2933 99 80

    22

    (2S)-2-Benzyl-N,N-dimethylaziridine-1-sulfonamide (CAS RN 902146-43-4)

    0 %

    -

    31.12.2017

    ex 2933 99 80

    23

    Tebuconazole (ISO) (CAS RN 107534-96-3) with a purity by weight of 95 % or more

    0 %

    -

    31.12.2019

    ex 2933 99 80

    24

    1,3-Dihydro-5,6-diamino-2H-benzimidazol-2-one (CAS RN 55621-49-3)

    0 %

    -

    31.12.2017

    ex 2933 99 80

    27

    5,6-Dimethylbenzimidazole (CAS RN 582-60-5)

    0 %

    -

    31.12.2019

    ex 2933 99 80

    28

    N-(2,3-Dihydro-2-oxo-1H-benzimidazol-5-yl)-3-hydroxynaphthalene-2-carboxamide (CAS RN 26848-40-8)

    0 %

    -

    31.12.2017

    ex 2933 99 80

    30

    Quizalofop-P-ethyl (ISO) (CAS RN 100646-51-3)

    0 %

    -

    31.12.2018

    ex 2933 99 80

    33

    Penconazole (ISO) (CAS RN 66246-88-6)

    0 %

    -

    31.12.2019

    ex 2933 99 80

    37

    8-Chloro-5,10-dihydro-11H-dibenzo [b,e] [1,4]diazepin-11-one (CAS RN 50892-62-1)

    0 %

    -

    31.12.2019

    ex 2933 99 80

    40

    trans-4-Hydroxy-L-proline (CAS RN 51-35-4)

    0 %

    -

    31.12.2018

    ex 2933 99 80

    43

    2,3-Dihydro-1H-pyrrole[3,2,1-ij]quinoline (CAS RN 5840-01-7)

    0 %

    -

    31.12.2017

    ex 2933 99 80

    45

    Maleic hydrazide (ISO) (CAS RN 123-33-1)

    0 %

    -

    31.12.2018

    ex 2933 99 80

    47

    Paclobutrazol (ISO) (CAS RN 76738-62-0)

    0 %

    -

    31.12.2017

    ex 2933 99 80

    50

    Metconazole (ISO) (CAS RN 125116-23-6)

    3.2%

    -

    31.12.2018

     (7)ex 2933 99 80

    52

    N-Boc-trans-4-Hydroxy-L-proline methyl ester (CAS RN 74844-91-0)

    0 %

    -

    31.12.2020

    ex 2933 99 80

    53

    Potassium (S)-5-(tert-butoxycarbonyl)-5-azaspiro[2.4]heptane-6-carboxylate (CUS 0133723-1) (5)

    0 %

    -

    31.12.2018

     (7)ex 2933 99 80

    54

    3-(Salicyloylamino)-1,2,4-triazole (CAS RN 36411-52-6)

    0 %

    -

    31.12.2020

    ex 2933 99 80

    55

    Pyridaben (ISO) (CAS RN 96489-71-3)

    0 %

    -

    31.12.2019

    ex 2933 99 80

    57

    2-(5-Methoxyindol-3-yl)ethylamine (CAS RN 608-07-1)

    0 %

    -

    31.12.2018

    ex 2933 99 80

    62

    1H-Indole-6-carboxylic acid (CAS RN 1670-82-2)

    0 %

    -

    31.12.2018

    ex 2933 99 80

    67

    Candesartan ethyl ester (INNM) (CAS RN 139481-58-6)

    0 %

    -

    31.12.2016

    ex 2933 99 80

    71

    10-Methoxyiminostilbene (CAS RN 4698-11-7)

    0 %

    -

    31.12.2018

    ex 2933 99 80

    72

    1,4,7-Trimethyl-1,4,7-Triazacyclononane

    0 %

    -

    31.12.2018

    ex 2933 99 80

    74

    Imidazo[1,2-b] pyridazine-hydrochloride (CAS RN 18087-70-2)

    0 %

    -

    31.12.2018

    ex 2933 99 80

    78

    3-Amino-3-azabicyclo (3.3.0) octane hydrochloride (CAS RN 58108-05-7)

    0 %

    -

    31.12.2018

    ex 2933 99 80

    81

    1,2,3-Benzotriazole (CAS RN 95-14-7)

    0 %

    -

    31.12.2016

    ex 2933 99 80

    82

    Tolytriazole (CAS RN 29385-43-1)

    0 %

    -

    31.12.2018

    ex 2933 99 80

    89

    Carbendazim (ISO) (CAS RN 10605-21-7)

    0 %

    -

    31.12.2018

    ex 2934 10 00

    10

    Hexythiazox (ISO) (CAS RN 78587-05-0)

    0 %

    -

    31.12.2018

    ex 2934 10 00

    15

    4-Nitrophenyl thiazol-5-ylmethyl carbonate (CAS RN 144163-97-3)

    0 %

    -

    31.12.2017

    ex 2934 10 00

    20

    2-(4-Methylthiazol-5-yl)ethanol (CAS RN 137-00-8)

    0 %

    -

    31.12.2018

    ex 2934 10 00

    25

    (S)-Ethyl-2-(3-((2-isopropylthiazol-4-yl)methyl)-3-methylureido)-4-morpholinobutanoate oxalate (CAS RN 1247119-36-3)

    0 %

    -

    31.12.2017

    ex 2934 10 00

    35

    (2-Isopropylthiazol-4-yl)-N-methylmethanamine dihydrochloride (CAS RN 1185167-55-8)

    0 %

    -

    31.12.2017

    ex 2934 10 00

    40

    (Z)-2-(2-tert-butoxycarbonylaminothiazol-4-yl)-2-pentenoic acid (CAS RN 86978-24-7)

    0 %

    -

    31.12.2018

    ex 2934 10 00

    45

    2-Cyanimino-1,3-thiazolidine (CAS RN 26364-65-8)

    0 %

    -

    31.12.2019

    ex 2934 10 00

    60

    Fosthiazate (ISO) (CAS RN 98886-44-3)

    0 %

    -

    31.12.2019

    ex 2934 10 00

    70

    2-(Formylamino)-4-thiazoleacetyl chloride, hydrochloride (CAS RN 372092-18-7)

    0 %

    -

    31.12.2016

    ex 2934 10 00

    80

    3,4-Dichloro-5-carboxyisothiazole (CAS RN 18480-53-0)

    0 %

    -

    31.12.2016

    ex 2934 20 80

    20

    S-1,3-Benzothiazol-2-yl (2Z)-(5-amino-1,2,4-thiadiazol-3-yl)(methoxyimino)ethanethioate (CAS RN 89604-91-1)

    0 %

    -

    31.12.2016

    ex 2934 20 80

    30

    2-[[(Z)-[1-(2-Amino-4-thiazolyl)-2-(2-benzothiazolylthio)-2-oxoethylidene]amino]oxy]-acetic acid, methyl ester (CAS RN 246035-38-1)

    0 %

    -

    31.12.2016

    ex 2934 20 80

    40

    1,2-Benzisothiazol-3(2H)-one (Benzisothiazolinone (BIT)) (CAS RN 2634-33-5)

    0 %

    -

    31.12.2017

    ex 2934 20 80

    50

    S-(1,3-Benzothiazol-2-yl)-(Z)-2-(2-aminothiazol-4-yl)-2-(acetyloxyimino)thioacetate, (CAS RN 104797-47-9)

    0 %

    -

    31.12.2018

     (7)ex 2934 20 80

    60

    Benzothiazol-2-yl-(Z)-2-trityloxyimino-2-(2-aminothiazole-4-yl)-thioacetate (CAS RN 143183-03-3)

    0 %

    -

    31.12.2020

     (7)ex 2934 20 80

    70

    N,N-Bis(1,3-benzothiazol-2-ylsulphanyl)-2-methylpropan-2-amine (CAS RN 3741-80-8)

    0 %

    -

    31.12.2020

    ex 2934 30 90

    10

    2-Methylthiophenothiazine (CAS RN 7643-08-5)

    0 %

    -

    31.12.2017

    ex 2934 99 90

    10

    Fluralaner (INN) (CAS RN 864731-61-3)

    0 %

    -

    31.12.2019

    ex 2934 99 90

    11

    Methyl 3-{1,4-dioxaspiro[4.5]dec-8-yl[(trans-4-methylcyclohexyl)carbonyl]amino}-5-iodothiophene-2-carboxylate (CAS RN 1026785-65-8)

    0 %

    -

    31.12.2018

    ex 2934 99 90

    12

    Dimethomorph (ISO) (CAS RN 110488-70-5)

    0 %

    -

    31.12.2018

    ex 2934 99 90

    13

    Buprofezin (ISO) of a purity by weight of 98,5 % or more (CAS RN 953030-84-7)

    0 %

    -

    31.12.2018

    ex 2934 99 90

    14

    Ethyl N-{[1-methyl-2-({[4-(5-oxo-4,5-dihydro-1,2,4-oxadiazol-3-yl)phenyl]amino}methyl)-1H-benzimidazol-5-yl]carbonyl}-N-pyridin-2-yl-b-alaninate (CAS RN 872728-84-2)

    0 %

    -

    31.12.2017

    ex 2934 99 90

    15

    Carboxin (ISO) (CAS RN 5234-68-4)

    0 %

    -

    31.12.2018

    ex 2934 99 90

    16

    Difenoconazole (ISO) (CAS RN 119446-68-3)

    0 %

    -

    31.12.2019

    ex 2934 99 90

    17

    Methyl(1,8-diethyl-1,3,4,9-tetrahydropyrano[3,4-b]indol-1-yl)acetate (CAS RN 122188-02-7)

    0 %

    -

    31.12.2016

    ex 2934 99 90

    18

    3,3-bis(2-Methyl-1-octyl-1H-indol-3-yl)phthalide (CAS RN 50292-95-0)

    0 %

    -

    31.12.2017

    ex 2934 99 90

    19

    2-[4-(Dibenzo[b,f][1,4]thiazepin-11-yl)piperazin-1-yl] ethanol (CAS RN 329216-67-3)

    0 %

    -

    31.12.2019

    ex 2934 99 90

    20

    Thiophene (CAS RN 110-02-1)

    0 %

    -

    31.12.2019

    ex 2934 99 90

    22

    7-[4-(Diethylamino)-2-ethoxyphenyl]-7-(2-methyl-1-octyl-1H-indol-3-yl) furo[3,4-b]pyridin-5(7H)-one (CAS RN 87563-89-1)

    0 %

    -

    31.12.2017

    ex 2934 99 90

    23

    Bromuconazole (ISO) with a purity by weight of 96 % or more (CAS RN 116255-48-2)

    0 %

    -

    31.12.2016

    ex 2934 99 90

    24

    Flufenacet (ISO) (CAS RN 142459-58-3) with a purity by weight of 95 % or more

    0 %

    -

    31.12.2019

     (7)ex 2934 99 90

    25

    2,4-Diethyl-9H-thioxanthen-9-one (CAS RN 82799-44-8)

    0 %

    -

    31.12.2020

    ex 2934 99 90

    26

    4-Methylmorpholine 4-oxide in an aqueous solution (CAS RN 7529-22-8)

    0 %

    -

    31.12.2019

    ex 2934 99 90

    27

    2-(4-Hydroxyphenyl)-1-benzothiophene-6-ol (CAS RN 63676-22-2)

    0 %

    -

    31.12.2019

    ex 2934 99 90

    28

    11-(Piperazin-1-yl)dibenzo[b,f][1,4]thiazepine dihydrochloride (CAS RN 111974-74-4)

    0 %

    -

    31.12.2016

    ex 2934 99 90

    30

    Dibenzo[b,f][1,4]thiazepin-11(10H)-one (CAS RN 3159-07-7)

    0 %

    -

    31.12.2019

     (7)ex 2934 99 90

    31

    Uridine 5′-diphospho-N-acetylgalactosamine disodium salt (CAS RN 91183-98-1)

    0 %

    -

    31.12.2020

     (7)ex 2934 99 90

    32

    Uridine 5′-diphosphoglucuronic acid trisodium salt (CAS RN 63700-19-6)

    0 %

    -

    31.12.2020

     (7)ex 2934 99 90

    34

    7-[4-(Diethylamino)-2-ethoxyphenyl]-7-(1-ethyl-2-methyl-1H-indol-3-yl)furo[3,4-b]pyridin-5(7H)-one (CAS RN 69898-40-4)

    0 %

    -

    31.12.2020

    ex 2934 99 90

    35

    Dimethenamide (ISO) (CAS RN 87674-68-8)

    0 %

    -

    31.12.2018

    ex 2934 99 90

    37

    4-Propan-2-ylmorpholine (CAS RN 1004-14-4)

    0 %

    -

    31.12.2017

    ex 2934 99 90

    43

    Clopidogrel acid hydrochloride (CAS RN 144750-42-5)

    0 %

    -

    31.12.2016

    ex 2934 99 90

    45

    Tris(2,3-epoxypropyl)-1,3,5-triazinanetrione (CAS RN 2451-62-9)

    0 %

    -

    31.12.2018

    ex 2934 99 90

    48

    Propan-2-ol -- 2-methyl-4-(4-methylpiperazin-1-yl)-10H-thieno[2,3-b][1,5]benzodiazepine (1:2) dihydrate (CAS RN 864743-41-9)

    0 %

    -

    31.12.2016

     (7)ex 2934 99 90

    50

    10-[1,1′-Biphenyl]-4-yl-2-(1-methylethyl)-9-oxo-9H-thioxanthenium hexafluorophosphate, (CAS RN 591773-92-1)

    0 %

    -

    31.12.2020

    ex 2934 99 90

    60

    DL-Homocysteine thiolactone hydrochloride (CAS RN 6038-19-3)

    0 %

    -

    31.12.2018

    ex 2934 99 90

    66

    Tetrahydrothiophene-1,1-dioxide (CAS RN 126-33-0)

    0 %

    -

    31.12.2018

    ex 2934 99 90

    72

    1-[3-(5-Nitro-2-furyl)allylideneamino]imidazolidine-2,4-dione (CAS RN 1672-88-4)

    0 %

    -

    31.12.2018

    ex 2934 99 90

    74

    2-Isopropylthioxanthone (CAS RN 5495-84-1)

    0 %

    -

    31.12.2017

    ex 2934 99 90

    75

    (4R-cis)-1,1-Dimethylethyl-6-[2[2-(4-fluorophenyl)-5-(1-isopropyl)-3-phenyl-4-[(phenylamino)carbonyl]-1H-pyrrol-1-yl]ethyl]-2,2-dimethyl-1,3-dioxane-4-acetate (CAS RN 125971-95-1)

    0 %

    -

    31.12.2016

    ex 2934 99 90

    ex 3204 20 00

    76

    10

    2,5-Thiophenediylbis(5-tert-butyl-1,3-benzoxazole) (CAS RN 7128-64-5)

    0 %

    -

    31.12.2016

    ex 2934 99 90

    77

    Potassium 5-methyl-1,3,4-oxadiazole-2-carboxylate (CAS RN 888504-28-7)

    0 %

    -

    31.12.2016

    ex 2934 99 90

    79

    Thiophen-2-ethanol (CAS RN 5402-55-1)

    0 %

    -

    31.12.2018

    ex 2934 99 90

    83

    Flumioxazin (ISO) (CAS RN 103361-09-7) of a purity by weight of 96 % or more

    0 %

    -

    31.12.2019

    ex 2934 99 90

    84

    Etoxazole (ISO) (CAS RN 153233-91-1) of a purity by weight of 94,8 % or more

    0 %

    -

    31.12.2019

     (7)ex 2934 99 90

    86

    Dithianon (ISO) (CAS RN 3347-22-6)

    0 %

    -

    31.12.2020

     (7)ex 2934 99 90

    87

    2,2′-(1,4-Phenylene)bis(4H-3,1-benzoxazin-4-one) (CAS RN 18600-59-4)

    0 %

    -

    31.12.2020

    ex 2935 00 90

    10

    Florasulam (ISO) (CAS RN 145701-23-1)

    0 %

    -

    31.12.2019

    ex 2935 00 90

    15

    Flupyrsulfuron-methyl-sodium (ISO) (CAS RN 144740-54-5)

    0 %

    -

    31.12.2018

    ex 2935 00 90

    17

    6-Methyl-4-oxo-5,6-dihydro-4H-thieno[2,3-b]thiopyran-2-sulfonamide (CAS RN 120279-88-1)

    0 %

    -

    31.12.2018

    ex 2935 00 90

    20

    Toluenesulphonamides

    0 %

    -

    31.12.2018

    ex 2935 00 90

    23

    N-[4-(2-Chloroacetyl)phenyl]methanesulphonamide (CAS RN 64488-52-4)

    0 %

    -

    31.12.2016

    ex 2935 00 90

    25

    Triflusulfuron-methyl (ISO) (CAS RN 126535-15-7)

    0 %

    -

    31.12.2018

    ex 2935 00 90

    27

    Methyl (3R,5S,6E)-7-{4-(4-fluorophenyl)-6-isopropyl-2-[methyl(methylsulfonyl)amino]pyrimidin-5-yl}-3,5-dihydroxyhept-6-enoate (CAS RN 147118-40-9)

    0 %

    -

    31.12.2016

    ex 2935 00 90

    28

    N-Fluorobenzenesulphonimide (CAS RN 133745-75-2)

    0 %

    -

    31.12.2018

    ex 2935 00 90

    35

    Chlorsulfuron (ISO) (CAS RN 64902-72-3)

    0 %

    -

    31.12.2018

     (7)ex 2935 00 90

    40

    Imazosulfuron (ISO), of a purity by weight of 98 % or more (CAS RN 122548-33-8)

    0 %

    -

    31.12.2016

     (7)ex 2935 00 90

    41

    Flazasulfuron (ISO)(CAS RN 104040-78-0), with a purity of 97 % by weight or more

    0 %

    -

    31.12.2020

     (7)ex 2935 00 90

    42

    Penoxsulam (ISO) (CAS RN 219714-96-2)

    0 %

    -

    31.12.2020

    ex 2935 00 90

    43

    Oryzalin (ISO) (CAS RN 19044-88-3)

    0 %

    -

    31.12.2019

    ex 2935 00 90

    45

    Rimsulfuron (ISO) (CAS RN 122931-48-0)

    0 %

    -

    31.12.2018

    ex 2935 00 90

    47

    Halosulfuron-methyl (ISO) (CAS RN 100784-20-1) with a purity by weight of 98 % or more

    0 %

    -

    31.12.2019

    ex 2935 00 90

    48

    (3R,5S,6E)-7-[4-(4-Fluorophenyl)-2-[methyl(methylsulfonyl)amino]-6-(propan-2-yl)pyrimidin-5-yl]-3,5-dihydroxyhept-6-enoic acid -- 1-[(R)-(4-chlorophenyl)(phenyl)methyl]piperazine (1:1) (CAS RN 1235588-99-4)

    0 %

    -

    31.12.2016

    ex 2935 00 90

    50

    4,4′-Oxydi(benzenesulphonohydrazide) (CAS RN 80-51-3)

    0 %

    -

    31.12.2018

    ex 2935 00 90

    53

    2,4-Dichloro-5-sulphamoylbenzoic acid (CAS RN 2736-23-4)

    0 %

    -

    31.12.2019

    ex 2935 00 90

    55

    Thifensulfuron-methyl (ISO) (CAS RN 79277-27-3)

    0 %

    -

    31.12.2018

    ex 2935 00 90

    63

    Nicosulphuron (ISO), (CAS RN 111991-09-4) of a purity by weight of 91 % or more

    0 %

    -

    31.12.2019

    ex 2935 00 90

    65

    Tribenuron-methyl (ISO) (CAS RN 101200-48-0)

    0 %

    -

    31.12.2018

    ex 2935 00 90

    75

    Metsulfuron-methyl (ISO) (CAS RN 74223-64-6)

    0 %

    -

    31.12.2018

    ex 2935 00 90

    77

    [[4-[2-[[(3-Ethyl-2,5-dihydro-4-methyl-2-oxo-1H-pyrrol-1-yl)carbonyl]amino] ethyl]phenyl]sulfonyl]-carbamic acid ethyl ester, (CAS RN 318515-70-7)

    0 %

    -

    31.12.2019

    ex 2935 00 90

    85

    N-[4-(Isopropylaminoacetyl)phenyl]methanesulphonamide hydrochloride

    0 %

    -

    31.12.2018

    ex 2935 00 90

    88

    N-(2-(4-Amino-N-ethyl-m-toluidino)ethyl)methanesulphonamide sesquisulphate monohydrate (CAS RN 25646-71-3)

    0 %

    -

    31.12.2018

    ex 2935 00 90

    89

    3-(3-Bromo-6-fluoro-2-methylindol-1-ylsulphonyl)-N,N-dimethyl-1,2,4-triazol-1-sulphonamide (CAS RN 348635-87-0)

    0 %

    -

    31.12.2016

     (7)ex 2938 90 30

    10

    Ammonium glycyrrhizate (CAS RN 53956-04-0)

    0 %

    -

    31.12.2020

    ex 2938 90 90

    10

    Hesperidin (CAS RN 520-26-3)

    0 %

    -

    31.12.2018

    ex 2938 90 90

    20

    Ethylvanillin beta-D-glucopyranoside (CAS RN 122397-96-0)

    0 %

    -

    31.12.2018

    ex 2941 20 30

    10

    Dihydrostreptomycin sulphate (CAS RN 5490-27-7)

    0 %

    -

    31.12.2016

    ex 3102 50 00

    10

    Natural sodium nitrate

    0 %

    -

    31.12.2017

    3201 20 00

     

    Wattle extract

    0 %

    -

    31.12.2018

    ex 3201 90 90

    20

    Tanning extracts derived from gambier and myrobalan fruits

    0 %

    -

    31.12.2018

     (7)ex 3201 90 90

    40

    Reaction product of Acacia mearnsii extract, ammonium chloride and formaldehyde (CAS RN. 85029-52-3)

    0 %

    -

    31.12.2020

    ex 3204 11 00

    15

    Colourant C.I. Disperse Blue 360 (CAS RN 70693-64-0) and preparations based thereon with a colourant C.I. Disperse Blue 360 content of 99 % or more by weight

    0 %

    -

    31.12.2018

     (7)ex 3204 11 00

    20

    Colourant C.I. Disperse Yellow 241 (CAS RN 83249-52-9) and preparations based thereon with a colourant C.I. Disperse Yellow 241 content of 97 % or more by weight

    0 %

    -

    31.12.2020

    ex 3204 11 00

    25

    N-(2-Chloroethyl)-4-[(2,6-dichloro-4-nitrophenyl)azo]-N-ethyl-m-toluidine (CAS RN 63741-10-6)

    0 %

    -

    31.12.2019

     (7)ex 3204 11 00

    30

    Preparation of dispersion dyes, containing:

    — C.I. Disperse Orange 61,

    — C.I. Disperse Blue 291:1,

    — C.I. Disperse Violet 93:1,

    — C.I. Disperse Red 54

    0 %

    -

    31.12.2020

    ex 3204 11 00

    40

    Colourant C.I. Disperse Red 60 (CAS RN 17418-58-5) and preparations based thereon with a colourant C.I. Disperse Red 60 content of 50 % or more by weight

    0 %

    -

    31.12.2016

    ex 3204 11 00

    50

    Colourant C.I. Disperse Blue 72 (CAS RN 81-48-1) and preparations based thereon with a colourant C.I. Disperse Blue 72 content of 95 % or more by weight

    0 %

    -

    31.12.2016

    ex 3204 11 00

    60

    Colourant C.I. Disperse Blue 359 (CAS RN 62570-50-7) and preparations based thereon with a colourant C.I. Disperse Blue 359 content of 50 % or more by weight

    0 %

    -

    31.12.2016

    ex 3204 11 00

    70

    Colourant C.I. Disperse Red 343 (CAS RN 99035-78-6) and preparations based thereon with a colourant C.I. Disperse Red 343 content of 95 % or more by weight

    0 %

    -

    31.12.2017

    ex 3204 11 00

    80

    Dye preparation, non-ionogenic, containing:

    — N-[5-(acetylamino)-4-[(2-chloro-4,6-dinitrophenyl)azo]-2-methoxyphenyl]- 2-oxo-2-(phenylmethoxy)ethyl-β-alanine (CAS RN 159010-67-0)

    — N-[4-[(2-cyano-4-nitrophenyl)azo]phenyl]-N-methyl-2-(1,3-dihydro-1,3-dioxo-2H-isoindol-2-yl)ethyl-β-alanine (CAS RN 170222-39-6), and

    — N-[2-chloro-4-[(4-nitrophenyl)azo]phenyl]-2-[2-(1,3-dihydro-1,3-dioxo-2H-isoindol-2-yl)ethoxy]-2-oxoethyl-β-alanine (CAS RN 371921-34-5)

    0 %

    -

    31.12.2017

    ex 3204 12 00

    10

    Colourant C.I. Acid Blue 9 (CAS RN 2650-18-2) and preparations based thereon with a colourant C.I. Acid Blue 9 content of 50 % or more by weight

    0 %

    -

    31.12.2016

    ex 3204 12 00

    20

    Dye preparation, anionic, containing by weight 75 % or more of disodium-7-((4-chloro-6-(dodecylamino)-1,3,5-triazin-2-yl)amino)-4-hydroxy-3-((4-((4-sulfophenyl)azo)phenyl)azo)-2-naphthalenesulfonate (CAS RN 145703-76-0)

    0 %

    -

    31.12.2017

    ex 3204 12 00

    30

    Acid dye preparation, anionic, containing:

    — lithium-amino-4-(4-tert-butylanilino)anthraquinone-2-sulfonate (CAS RN 125328-86-1),

    — C.I. Acid Green 25 (CAS RN 4403-90-1), and

    — C.I. Acid Blue 80 (CAS RN 4474-24-2)

    0 %

    -

    31.12.2017

    ex 3204 12 00

    40

    Liquid dye preparation containing anionic acid dye C.I. Acid Blue 182 (CAS RN 12219-26-0)

    0 %

    -

    31.12.2018

    ex 3204 12 00

    50

    Colourant C.I. Acid Blue 80 (CAS RN 4474-24-2) and preparations based thereon with a colourant C.I. Acid Blue 80 content of 99 % or more by weight

    0 %

    -

    31.12.2018

    ex 3204 12 00

    60

    Colourant C.I. Acid Red 52 (CAS RN 3520-42-1) and preparations based thereon with a colourant C.I. Acid Red 52 content of 97 % or more by weight

    0 %

    -

    31.12.2019

     (7)ex 3204 12 00

    70

    Colourant C.I. Acid blue 25 (CAS RN 6408-78-2) and preparations based thereon with a colourant C.I. Acid blue 25 content of 80 % or more by weight

    0 %

    -

    31.12.2020

    ex 3204 13 00

    10

    Colourant C.I. Basic Red 1 (CAS RN 989-38-8) and preparations based thereon with a colourant C.I. Basic Red 1 content of 50 % or more by weight

    0 %

    -

    31.12.2016

    ex 3204 13 00

    20

    (2,2′-(3,3′-Dioxidobiphenyl-4,4′-diyldiazo)bis(6-(4-(3-(diethylamino)propylamino)-6-(3-(diethylammonio)propylamino)-1,3,5-triazin-2-ylamino)-3-sulfonato-1-naphtholato))dicopper(II) acetate lactate (CAS RN 159604-94-1)

    0 %

    -

    31.12.2017

    ex 3204 13 00

    30

    Colourant C.I. Basic Blue 7 (CAS RN 2390-60-5) and preparations based thereon with a colourant C.I. Basic Blue 7 content of 50 % or more by weight

    0 %

    -

    31.12.2017

    ex 3204 13 00

    40

    Colourant C.I. Basic Violet 1 (CAS RN 603-47-4 or CAS RN 8004-87-3) and preparations based thereon with a colourant C.I. Basic Violet 1 content of 90 % or more by weight

    0 %

    -

    31.12.2017

    ex 3204 13 00

    50

    Colourant C.I Basic Violet 11 (CAS RN 2390-63-8) and preparations based thereon with a colourant C.I Basic Violet 11 content of 90 % or more by weight

    0 %

    -

    31.12.2019

    ex 3204 13 00

    60

    Colourant C.I Basic Red 1:1 (CAS RN 3068-39-1) and preparations based thereon with a colourant C.I Basic Red 1:1 content of 90 % or more by weight

    0 %

    -

    31.12.2019

    ex 3204 14 00

    10

    Colourant C.I. Direct Black 80 (CAS RN 8003-69-8) and preparations based thereon with a colourant C.I. Direct Black 80 content of 90 % or more by weight

    0 %

    -

    31.12.2019

    ex 3204 14 00

    20

    Colourant C.I. Direct Blue 80 (CAS RN 12222-00-3) and preparations based thereon with a colourant C.I. Direct Blue 80 content of 90 % or more by weight

    0 %

    -

    31.12.2019

    ex 3204 14 00

    30

    C.I. Colourant Direct Red 23 (CAS RN 3441-14-3) and preparations based thereon with a colourant C.I. Direct Red 23 content of 90 % or more by weight

    0 %

    -

    31.12.2019

    ex 3204 15 00

    10

    Colourant C.I. Vat Orange 7 (C.I.Pigment Orange 43) (CAS RN 4424-06-0) and preparations based thereon with a colourant C.I. Vat Orange 7 (C.I.Pigment Orange 43) content of 20 % or more by weight

    0 %

    -

    31.12.2017

    ex 3204 15 00

    60

    Colourant C.I. Vat Blue 4 (CAS RN 81-77-6) and preparations based thereon with a colourant C.I. Vat Blue 4 content of 50 % or more by weight

    0 %

    -

    31.12.2018

    ex 3204 15 00

    70

    Colourant C.I. Vat Red 1 (CAS RN 2379-74-0)

    0 %

    -

    31.12.2018

     (7)ex 3204 16 00

    20

    Colourant Reactive Black 5 (CAS RN 17095-24-8) and preparations based thereon with a colourant Reactive Black 5 content of 60 % or more but not more than 75 % by weight, and including one or more of the following:

    — Colourant Reactive Yellow 201 (CAS RN 27624-67-5),

    — 1-Naphthalenesulphonicacid,4-amino-3-[[4-[[2-(sulphooxy)ethyl]sulphonyl]phenyl]azo]-, disodium salt (CAS RN 250688-43-8), or

    — 3,5-diamino-4-[[4-[[2-(sulphooxy)ethyl]sulphonyl]fenyl]azo]-2-[[2-sulfo-4-[[2-(sulphooxy)ethyl]sulfonyl]phenyl]azobenzoic acid sodium salt (CAS RN 906532-68-1)

    0 %

    -

    31.12.2019

    ex 3204 17 00

    10

    Colourant C.I. Pigment Yellow 81 (CAS RN 22094-93-5) and preparations based thereon with a colourant C.I. Pigment Yellow 81 content of 50 % or more by weight

    0 %

    -

    31.12.2018

    ex 3204 17 00

    12

    Colourant C.I. Pigment Orange 64 (CAS RN 72102-84-2) and preparations based thereon with a colourant C.I. colourant orange 64 content of 90 % or more by weight

    0 %

    -

    31.12.2019

    ex 3204 17 00

    13

    Colourant C.I. Pigment Red 48:2 (CAS RN 7023-61-2)

    0 %

    -

    31.12.2018

    ex 3204 17 00

    15

    Colourant C.I. Pigment Green 7 (CAS RN 1328-53-6) and preparations based thereon with a colourant C.I. Pigment Green 7 content of 40 % or more by weight

    0 %

    -

    31.12.2016

    ex 3204 17 00

    17

    Colourant C.I. Pigment Red 12 (CAS RN 6410-32-8) and preparations based thereon with a colourant C.I. Pigment Red 12 content of 35 % or more by weight

    0 %

    -

    31.12.2019

    ex 3204 17 00

    20

    Colourant C.I. Pigment Blue 15:3 (CAS RN 147-14-8) and preparations based thereon with a colourant C.I. Pigment Blue 15:3 content of 35 % or more by weight

    0 %

    -

    31.12.2016

    ex 3204 17 00

    23

    Colourant C.I. Pigment Brown 41 (CAS RN 211502-16-8 or CAS RN 68516-75-6)

    0 %

    -

    31.12.2019

    ex 3204 17 00

    25

    Colourant C.I. Pigment Yellow 14 (CAS RN 5468-75-7) and preparations based thereon with a colourant C.I. Pigment Yellow 14 content of 25 % or more by weight

    0 %

    -

    31.12.2016

    ex 3204 17 00

    27

    Colourant C.I. Pigment Blue 15:4 (CAS RN 147-14-8) and preparations based thereon, containing by weight 95 % or more of an organic dyestuff

    0 %

    -

    31.12.2019

     (7)ex 3204 17 00

    33

    Colourant C.I. Pigment Blue 15:1 (CAS RN 147-14-8) and preparations based thereon with a colourant C.I. Pigment Blue 15:1 content of 35 % or more by weight

    0 %

    -

    31.12.2020

    ex 3204 17 00

    35

    Colourant C.I. Pigment Red 202 (CAS RN 3089-17-6) and preparations based thereon with a colourant C.I. Pigment Red 202 content of 70 % or more by weight

    0 %

    -

    31.12.2016

    ex 3204 17 00

    40

    Colourant C.I. Pigment Yellow 120 (CAS RN 29920-31-8) and preparations based thereon with a colourant C.I. Pigment Yellow 120 content of 50 % or more by weight

    0 %

    -

    31.12.2019

     (7)ex 3204 17 00

    45

    Colourant C.I. Pigment Yellow 174 (CAS RN 78952-72-4), highly resinated pigment (approx. 35 % disproportionate resin), with a purity of 98 % by weight or more, in the form of extruded beads with a moisture content of not more than 1 % by weight

    0 %

    -

    31.12.2018

    ex 3204 17 00

    60

    Colourant C.I. Pigment Red 53:1 (CAS RN 5160-02-1) and preparations based thereon with a colourant C.I. Pigment Red 53:1 content of 50 % or more by weight

    0 %

    -

    31.12.2016

    ex 3204 17 00

    65

    Colourant C.I. Pigment Red 53 (CAS RN 2092-56-0) and preparations based thereon with a colourant C.I. Pigment Red 53 content of 50 % or more by weight

    0 %

    -

    31.12.2016

    ex 3204 17 00

    67

    Colourant C.I. Pigment Red 57:1 (CAS RN 5281-04-9) with a purity of 98 % by weight or more, in the form of extruded beads, with a moisture content of not more than 1 % by weight.

    0 %

    -

    31.12.2018

     (7)ex 3204 17 00

    70

    Colourant C.I. Pigment Yellow 13 (CAS RN 5102-83-0 or CAS RN 15541-56-7) and preparations based thereon with a colourant C.I. Pigment Yellow 13 content of 60 % or more by weight

    0 %

    -

    30.06.2016

    ex 3204 17 00

    75

    Colourant C.I. Pigment Orange 5 (CAS RN 3468-63-1) and preparations based thereon with a colourant C.I. Pigment Orange 5 content of 80 % or more by weight

    0 %

    -

    31.12.2017

    ex 3204 17 00

    80

    Colourant C.I. Pigment Red 207 (CAS RN 71819-77-7) and preparations based thereon with a colourant C.I. Pigment Red 207 content of 50 % or more by weight

    0 %

    -

    31.12.2017

    ex 3204 17 00

    85

    Colourant C.I. Pigment Blue 61 (CAS RN 1324-76-1) and preparations based thereon with a colourant C.I. Pigment Blue 61 content of 35 % or more by weight

    0 %

    -

    31.12.2017

    ex 3204 17 00

    88

    Colourant C.I. Pigment Violet 3 (CAS RN 1325-82-2 or CAS RN 101357-19-1) and preparations based thereon with a colourant C.I. Pigment Violet 3 content of 90 % or more by weight

    0 %

    -

    31.12.2017

    ex 3204 19 00

    12

    Colourant C.I. Solvent Violet 49 (CAS RN 205057-15-4)

    0 %

    -

    31.12.2019

    ex 3204 19 00

    14

    Red colourant preparation, in a form of wet paste, containing by weight:

    — 35 % or more but not more than 40 % of 1-[[4-(phenylazo)phenyl]azo]naphthalen-2-ol methyl derivatives (CAS RN 70879-65-1)

    — not more than 3 % of 1-(phenylazo)naphthalen-2-ol (CAS RN 842-07-9)

    — not more than 3 % of 1-[(2-methylphenyl)azo]naphthalen-2-ol (CAS RN 2646-17-5)

    — 55 % or more but not more than 65 % of water

    0 %

    -

    31.12.2019

    ex 3204 19 00

    21

    Photochromic dye, 4-(3-(4-butoxyphenyl)-6-methoxy-3-(4-methoxyphenyl)-13,13-dimethyl-11-(trifluoromethyl)-3,13-dihydrobenzo[h]indeno[2,1-f]chromen-7-yl)morpholine (CAS RN 1021540-64-6)

    0 %

    -

    31.12.2019

    ex 3204 19 00

    43

    Photochromic dye, bis(2-(4-(7-methoxy-3-(4-methoxyphenyl)-11-phenyl-13, 13-dipropyl-3, 13-dihydrobenzo[h]indeno[2,1-f]chromen-3-yl)phenoxy)ethyl) decanedioate (CUS 0133724-2) (5)

    0 %

    -

    31.12.2018

    ex 3204 19 00

    47

    Photochromic dye, 4-(4-(13,13-dimethyl-3,11-diphenyl-3,13-dihydrobenzo[h]indeno[2,1-f]chromen-3-yl)phenyl)morpholine (CUS 0133726-4) (5)

    0 %

    -

    31.12.2018

    ex 3204 19 00

    53

    Photochromic dye, 3-(4-butoxyphenyl)-3-(4-fluorophenyl)-6,7-dimethoxy-13,13-dimethyl-3,13-dihydrobenzo[h]indeno[2,1-f]chromene-11-carbonitrile (CUS 0133725-3) (5)

    0 %

    -

    31.12.2018

    ex 3204 19 00

    55

    Photochromic dye, 4, 4′-(7-methoxy-11-phenyl-13, 13-dipropyl-3, 13-dihydrobenzo[h]indeno[2, 1-f]chromene-3, 3-diyl)diphenol (CUS 0133728-6) (5)

    0 %

    -

    31.12.2018

    ex 3204 19 00

    57

    Photochromic dye, bis(2-{4-[11-cyano-3-(4-fluorophenyl)-6,7-dimethoxy-13,13-dimethyl-3, 13-dihydrobenzo[h]indeno[2,1-f]chromen-3-yl]phenoxy}ethyl) decanedioate (CUS 0133729-7) (5)

    0 %

    -

    31.12.2018

    ex 3204 19 00

    63

    Photochromic dye, 1-{4-(6-methoxy-3-(4-methoxyphenyl)-13,13-dimethyl-3, 13-dihydrobenzo[h]indeno[2,1-f]chromen-3-yl)phenyl}piperidine (CUS 0133727-5) (5)

    0 %

    -

    31.12.2018

    ex 3204 19 00

    70

    Colourant C.I. Solvent Red 49:2 (CAS RN 1103-39-5) and preparations based thereon with a colourant C.I. Solvent Red 49:2 content of 90 % or more by weight

    0 %

    -

    31.12.2018

     (7)ex 3204 19 00

    71

    Colourant C.I. Solvent Brown 53 (CAS RN 64696-98-6) and preparations based thereon with a colourant C.I. Solvent Brown 53 content of 95 % or more by weight

    0 %

    -

    31.12.2020

     (7)ex 3204 19 00

    73

    Colourant C.I. Solvent Blue 104 (CAS RN 116-75-6) and preparations based thereon with a colourant C.I. Solvent Blue 104 content of 97 % or more by weight

    0 %

    -

    31.12.2020

    ex 3204 19 00

    77

    Colourant C.I. Solvent Yellow 98 (CAS RN 27870-92-4 or CAS RN 12671-74-8) and preparations based thereon with a colourant C.I. Solvent Yellow 98 content of 95 % or more by weight

    0 %

    -

    31.12.2016

    ex 3204 19 00

    84

    Colourant C.I. Solvent Blue 67 (CAS RN 12226-78-7) and preparations based thereon with a colourant C.I. Solvent Blue 67 content of 98 % or more by weight

    0 %

    -

    31.12.2017

    ex 3204 19 00

    85

    Colourant C.I. Solvent Red HPR (CAS RN 75198-96-8) and preparations based thereon with a colourant C.I. Solvent Red HPR content of 95 % or more by weight

    0 %

    -

    31.12.2017

    ex 3204 20 00

    30

    Colourant C.I. Fluorescent Brightener 351 (CAS RN 27344-41-8) and preparations based thereon with a colourant C.I. Fluorescent Brightener 351 content of 90 % or more by weight

    0 %

    -

    31.12.2016

    ex 3204 90 00

    10

    Colourant C.I Solvent Yellow 172 (also known as C.I. Solvent Yellow 135) (CAS RN 68427-35-0) and preparations based thereon with a colourant C.I Solvent Yellow 172 (also known as C.I. Solvent Yellow 135) content of 90 % or more by weight

    0 %

    -

    31.12.2019

    ex 3205 00 00

    10

    Aluminium lakes prepared from dyes for use in the manufacture of pigments for the pharmaceutical industry (1)

    0 %

    -

    31.12.2018

    ex 3205 00 00

    20

    Dye C.I. Carbon Black 7 Lake

    0 %

    -

    31.12.2016

    ex 3206 11 00

    10

    Titanium dioxide coated with isopropoxytitanium triisostearate, containing by weight 1,5 % or more but not more than 2,5 % of isopropoxytitanium triisostearate

    0 %

    -

    31.12.2018

    ex 3206 19 00

    10

    Preparation containing by weight:

    — 72 % (± 2 %) of mica (CAS RN 12001-26-2), and

    — 28 % (± 2 %) of titanium dioxide (CAS RN 13463-67-7)

    0 %

    -

    31.12.2016

    ex 3206 42 00

    10

    Lithopone (CAS RN 1345-05-7)

    0 %

    -

    31.12.2018

    ex 3206 49 70

    10

    Non aqueous dispersion, containing by weight:

    — 57 % or more but not more than 63 % of aluminium oxide (CAS RN 1344-28-1)

    — 37 % or more but not more than 42 % of titanium dioxide (CAS RN13463-67-7), and

    — 1 % or more but not more than 2 % of triethoxycaprylyl silane (CAS RN 2943-75-1)

    0 %

    -

    31.12.2018

     (7)ex 3206 49 70

    20

    Colourant C.I. Pigment Blue 27 (CAS RN 14038-43-8)

    0 %

    -

    31.12.2019

    3206 50 00

     

    Inorganic products of a kind used as luminophores

    0 %

    -

    31.12.2018

    ex 3207 30 00

    10

    Preparation containing:

    — not more than 85 % by weight of silver,

    — not less than 2 % by weight of palladium,

    — barium titanate,

    — terpineol, and

    — ethyl cellulose,

    used for screen printing in the manufacture of multilayer ceramic capacitors (1)

    0 %

    -

    31.12.2018

    ex 3207 30 00

    20

    Printing paste containing

    — 30 % by weight or more, but not more than 50 % of silver and

    — 8 % by weight or more, but not more than 17 % of palladium

    0 %

    -

    31.12.2019

    ex 3207 40 85

    20

    Glass flakes coated with silver, of an average diameter of 40 (± 10) μm

    0 %

    -

    31.12.2018

    ex 3207 40 85

    40

    Glass flakes (CAS RN 65997-17-3):

    — of a thickness of 0,3 μm or more but not more than 10 μm, and

    — coated with titanium dioxide (CAS RN 13463-67-7) or iron oxide (CAS RN 18282-10-5)

    0 %

    -

    31.12.2017

     (7)ex 3208 10 10

    10

    Thermoplastic polyester copolymer resin with a solid content of 30 % or more but not more than 50 %, in organic solvents

    0 %

    -

    31.12.2020

    ex 3208 10 90

    ex 3707 90 90

    10

    60

    Anti-reflection coating, consisting of an ester based polymer modified with a chromophore group, in the form of a solution of either 2-methoxy-1-propanol, 2-methoxy-1-methylethyl acetate or methyl-2-hydroxyisobutyrate, containing by weight not more than 10 % of polymer

    0 %

    -

    31.12.2018

    ex 3208 20 10

    10

    Copolymer of N-vinylcaprolactam, N-vinyl-2-pyrrolidone and dimethylaminoethyl methacrylate, in the form of a solution in ethanol containing by weight 34 % or more but not more than 40 % of copolymer

    0 %

    -

    31.12.2018

    ex 3208 20 10

    20

    Immersion topcoat solution containing by weight 0,5 % or more but not more than 15 % of acrylate-methacrylate-alkenesulphonate copolymers with fluorinated side chains, in a solution of n-butanol and/or 4-methyl-2-pentanol and/or diisoamylether

    0 %

    -

    31.12.2018

    ex 3208 90 19

    10

    Copolymer of maleic acid and methyl vinyl ether, monoesterified with ethyl and/or isopropyl and/or butyl groups, in the form of a solution in ethanol, ethanol and butanol, isopropanol or isopropanol and butanol

    0 %

    -

    31.12.2018

    ex 3208 90 19

    15

    Chlorinated polyolefins, in a solution

    0 %

    -

    31.12.2018

     (7)ex 3208 90 19

    20

    Preparation of 5 % or more but not more than 20 % by weight of propylene maleic anhydride copolymer or a blend of polypropylene and propylene maleic anhydride copolymer in an organic solvent

    0 %

    -

    31.12.2020

    ex 3208 90 19

    ex 3208 90 91

    25

    20

    Tetrafluoroethylene copolymer in butylacetate solution with a content of solvent of 50 % (± 2 %) by weight

    0 %

    -

    31.12.2017

    ex 3208 90 19

    35

    Silicones containing 50 % by weight or more of xylene of a kind used for the manufacture of long term surgical implants

    0 %

    -

    31.12.2018

    ex 3208 90 19

    40

    Polymer of methylsiloxane, in the form of a solution in a mixture of acetone, butanol, ethanol and isopropanol, containing by weight 5 % or more but not more than 11 % of polymer of methylsiloxane

    0 %

    -

    31.12.2018

    ex 3208 90 19

    ex 3824 90 92

    45

    63

    Polymer consisting of a polycondensate of formaldehyde and naphthalenediol, chemically modified by reaction with an alkyne halide, dissolved in propylene glycol methyl ether acetate

    0 %

    -

    31.12.2018

    ex 3208 90 19

    50

    Solution containing by weight:

    — (65 ± 10) % of γ-butyrolactone,

    — (30 ± 10) % of polyamide resin,

    — (3,5 ± 1,5) % of naphthoquinone ester derivative, and

    — (1,5 ± 0,5) % of arylsilicic acid

    0 %

    -

    31.12.2018

    ex 3208 90 19

    60

    Copolymer of hydroxystyrene with one or more of the following:

    — styrene

    — alkoxystyrene

    — alkylacrylates

    dissolved in ethyl lactate

    0 %

    -

    31.12.2016

    ex 3208 90 19

    75

    Acenaphthalene copolymer in ethyl lactate solution

    0 %

    -

    31.12.2017

    ex 3208 90 99

    10

    Solution based on chemically modified natural polymers, containing two or more of the following dyes:

    — methyl 8′-acetoxy-1,3,3,5,6-pentamethyl-2,3-dihydrospiro[1H-indole-2,3′-naphtho[2,1-b][1,4]oxazine]-9′-carboxylate,

    — methyl 6-(isobutyryloxy)-2,2-diphenyl-2H-benzo[h]chromene-5-carboxylate,

    — 13-isopropyl-3,3-bis(4-methoxyphenyl)-6,11-dimethyl-3,13-dihydrobenzo[h]indeno[2,1-f]chromen-13-ol,

    — ethoxycarbonylmethyl 8-methyl-2,2-diphenyl-2H-benzo[h]chromene-5-carboxylate,

    — 13-ethyl-3-[4-(morpholino)phenyl]-3-phenyl-3,13-dihydrobenzo[h]indeno[2,1-f]chromen-13-ol

    0 %

    -

    31.12.2018

    ex 3212 10 00

    ex 7607 20 90

    10

    30

    Metallised film:

    — consisting of eight or more layers of aluminium (CAS RN 7429-90-5) of a purity of 99,8 % or more,

    — with an optical density of each aluminium layer of not more than 3.0,

    — with each aluminium layer separated by a resin layer,

    — on a carrier film of PET, and

    — on rolls of up to 50 000 metres in length

    0 %

    -

    31.12.2019

    ex 3215 11 00

    ex 3215 19 00

    10

    10

    Printing ink, liquid, consisting of a dispersion of a vinyl acrylate copolymer and colour pigments in isoparaffins, containing by weight not more than 13 % of vinyl acrylate copolymer and colour pigments

    0 %

    -

    31.12.2018

    ex 3215 19 00

    20

    Ink:

    — consisting of a polyester polymer and a dispersion of silver (CAS RN 7440-22-4) and silver chloride (CAS RN 7783-90-6) in methyl propyl ketone (CAS RN 107-87-9),

    — with a total solid content by weight of 55 % or more, but not more than 57 %, and

    — with a specific gravity of 1,40 g/cm3 or more, but not more than 1,60 g/cm3,

    used to imprint electrodes (1)

    0 %

    l

    31.12.2017

    ex 3215 90 00

    10

    Ink formulation, for use in the manufacture of ink-jet cartridges (1)

    0 %

    -

    31.12.2018

    ex 3215 90 00

    20

    Heat sensitive ink fixed on a plastic film

    0 %

    -

    31.12.2018

    ex 3215 90 00

    30

    Disposable cartridge ink, containing by weight:

    — 5 % or more, but not more than 10 % of amorphous silicon dioxide, or

    — 3,8 % or more of dye C.I. Solvent Black 7 in organic solvents

    for use in the marking of integrated circuits (1)

    0 %

    -

    31.12.2018

     (7)ex 3215 90 00

    40

    Dry ink powder with a base of hybrid resin (made from polystyrene acrylic resin and polyester resin) mixed with:

    — wax,

    — a vinyl-based polymer, and

    — a colouring agent

    for use in the manufacture of toner bottles for photocopiers, fax machines, printers and multifunction devices (1)

    0 %

    -

    31.12.2020

    3301 12 10

     

    Essential oil of orange, not deterpenated

    0 %

    -

    31.12.2018

     (7)ex 3402 11 90

    10

    Sodium lauroyl methyl isethionate

    0 %

    -

    31.12.2020

    ex 3402 13 00

    10

    Vinyl copolymer surface active agent based on polypropylene glycol

    0 %

    -

    31.12.2018

    ex 3402 13 00

    20

    Surfactant containing 1,4-dimethyl-1,4-bis(2-methylpropyl)-2-butyne-1,4-diyl ether, polymerised with oxirane, methyl terminated

    0 %

    -

    31.12.2017

    ex 3402 13 00

    30

    Polyoxyethylated-12-hydroxystearic acid (CAS RN 70142–34–6)

    0 %

    -

    31.12.2018

    ex 3402 90 10

    10

    Surface-active mixture of methyltri-C8-C10-alkylammonium chlorides

    0 %

    -

    31.12.2019

    ex 3402 90 10

    20

    Mixture of docusate sodium (INN) and sodium benzoate

    0 %

    -

    31.12.2018

     (7)ex 3402 90 10

    30

    Surface-active preparation, consisting of a mixture of sodium docusate and ethoxylated 2,4,7,9-tetramethyldec-5-yne-4,7-diol (CAS RN 577-11-7 and 9014-85-1)

    0 %

    -

    31.12.2020

     (7)ex 3402 90 10

    50

    Surface-active preparation, consisting of a mixture of polysiloxane and poly(ethylene glycol)

    0 %

    -

    31.12.2020

     (7)ex 3402 90 10

    60

    Surface-active preparation, containing 2-ethylhexyloxymethyl oxirane

    0 %

    -

    31.12.2020

    ex 3402 90 10

    70

    Surface-active preparation, containing ethoxylated 2,4,7,9-tetramethyl-5-decyne-4,7-diol (CAS RN 9014-85-1)

    0 %

    -

    31.12.2019

    ex 3403 99 00

    10

    Cutting-fluid preparation based on an aqueous solution of synthetic polypeptides

    0 %

    -

    31.12.2018

    ex 3505 10 50

    20

    O-(2-Hydroxyethyl)-derivative of hydrolysed maize starch (CAS RN 9005-27-0)

    0 %

    -

    31.12.2018

    ex 3506 91 00

    10

    Adhesive based on an aqueous dispersion of a mixture of dimerised rosin and a copolymer of ethylene and vinyl acetate (EVA)

    0 %

    -

    31.12.2018

    ex 3506 91 00

    30

    Two component microencapsulated epoxy adhesive dispersed in a solvent

    0 %

    -

    31.12.2018

    ex 3506 91 00

    40

    Acrylic pressure sensitive adhesive with a thickness of 0,076 mm or more but not more than 0,127 mm, put up in rolls of a width of 45,7 cm or more but not more than 132 cm supplied on a release liner with an initial peel adhesion release value of not less than 15 N/25 mm (measured according to ASTM D3330)

    0 %

    -

    31.12.2019

     (7)ex 3506 91 00

    50

    Preparation containing by weight:

    — 34,5 % or more but not more than 60 % of styrene butadiene styrene copolymers, and

    — rosin esters.

    Dissolved in:

    — Methyl ethyl ketone (CAS RN 78-93-3),

    — Heptane (CAS RN 142-82-5), and

    — Toluene (CAS RN 108-88-3) or light aliphatic solvent naphtha (CAS RN 64742-89-8)

    0 %

    -

    31.12.2020

    ex 3507 90 90

    10

    Preparation of Achromobacter lyticus protease (CAS RN 123175-82-6) for use in the manufacture of human and analogue insulin products (1)

    0 %

    -

    31.12.2019

    ex 3601 00 00

    10

    Pyrotechnical powder in the form of granulate of cylindrical shape, composed of strontium nitrate or copper nitrate in the solution of nitroguanidine, binder and additives, used as a component of airbag inflators (1)

    0 %

    -

    31.12.2016

    ex 3701 30 00

    10

    Relief printing plate, of a kind used for printing on newsprint, consisting of a metal substrate coated with a photopolymer layer of a thickness of 0,2 mm or more but not more than 0,8 mm, not covered with a release film, of a total thickness of not more than 1 mm

    0 %

    -

    31.12.2018

    ex 3701 30 00

    20

    Photosensitive plate consisting of a photopolymer layer on a polyester foil of a total thickness of more than 0,43 mm but not more than 3,18 mm

    0 %

    -

    31.12.2019

    ex 3701 99 00

    10

    Plate of quartz or of glass, covered with a film of chromium and coated with a photosensitive or electron-sensitive resin, of a kind used for goods of heading 8541 or 8542

    0 %

    -

    31.12.2018

    ex 3705 90 90

    10

    Photomasks for photographically transferring circuit diagram patterns onto semiconductor wafers

    0 %

    -

    31.12.2019

    ex 3707 10 00

    10

    Photosensitive emulsion for the sensitization of silicon discs (1)

    0 %

    -

    31.12.2018

    ex 3707 10 00

    15

    Sensitising emulsion consisting of:

    — by weight not more than 12 % of diazooxonaphthtalenesulphonic acid ester

    — phenolic resins

    in a solution containing at least 2-methoxy-1-methylethyl acetate or ethyl lactate or methyl 3-methoxypropionate or 2-heptanone

    0 %

    -

    31.12.2018

    ex 3707 10 00

    25

    Sensitising emulsion containing:

    — phenolic or acrylic resins

    — a maximum 2 % by weight of light sensitive acid precursor,

    in a solution containing 2-methoxy-1-methylethyl acetate or ethyl lactate

    0 %

    -

    31.12.2018

    ex 3707 10 00

    30

    Preparation based on photosensitive acrylic containing polymer, containing colour pigments, 2-methoxy-1-methylethylacetate and cyclohexanone and whether or not containing ethyl-3-ethoxypropionate

    0 %

    -

    31.12.2018

    ex 3707 10 00

    ex 3707 90 90

    35

    70

    Sensitising emulsion or preparation containing one or more of:

    — acrylate polymers,

    — methacrylate polymers,

    — derivatives of styrene polymers,

    containing by weight not more than 7 % of photosensitive acid precursors, dissolved in an organic solvent containing at least 2-methoxy-1-methylethyl acetate

    0 %

    -

    31.12.2016

    ex 3707 10 00

    40

    Sensitising emulsion, containing:

    — not more than 10 % by weight of naphthoquinonediazide esters,

    — 2 % or more but not more than 35 % by weight of copolymers of hydroxystyrene

    — not more than 7 % by weight of epoxy-containing derivatives

    dissolved in 1-ethoxy-2-propyl acetate and/or ethyl lactate

    0 %

    -

    31.12.2016

    ex 3707 10 00

    45

    Photosensitive emulsion consisting of cyclized polyisoprene containing:

    — 55 % or more but not more than 75 % by weight of xylene, and

    — 12 % or more but not more than 18 % by weight of ethylbenzene

    0 %

    -

    31.12.2019

    ex 3707 10 00

    50

    Photosensitive emulsion containing by weight:

    — 20 % or more but not more than 45 % of copolymers of acrylates and/or methacrylates and hydroxystyrene derivatives,

    — 25 % or more but not more than 50 % of organic solvent containing at least ethyl lactate and/or propylene glycolmethylether acetate,

    — 5 % or more but not more than 30 % of acrylates,

    — not more than 12 % of a photoinitiator

    0 %

    -

    31.12.2019

    ex 3707 10 00

    55

    Dielectric coating, buffering mechanical stress, consisting of a radically photopatternable polyamide-precursor with unsaturated carbon in the side-chains which is convertible into a polyimide, in form of a solution from N-methyl-2-pyrrolidone or N-ethyl-2-pyrrolidone with a polymer content by weight 10 % or more

    0 %

    -

    31.12.2018

    ex 3707 90 20

    10

    Dry ink powder or toner blend, consisting of a copolymer of styrene and butyl acrylate and either magnetite or carbon black, for use as a developer in the manufacture of cartridges for facsimile machines, computer printers or copiers (1)

    0 %

    -

    31.12.2018

    ex 3707 90 20

    20

    Dry ink powder or toner blend, based on a polyol resin, for use as a developer in the manufacture of cartridges for facsimile machines, computer printers or copiers (1)

    0 %

    -

    31.12.2018

    ex 3707 90 20

    40

    Dry ink powder or toner blend, based on a polyester resin, manufactured by a polymerisation process, for use as a developer in the manufacture of cartridges for facsimile machines, computer printers or copiers (1)

    0 %

    -

    31.12.2018

    ex 3707 90 20

    50

    Dry ink powder or toner blend, consisting of:

    — styrene acrylate/butadiene copolymer

    — either carbon black or an organic pigment

    — whether or not containing polyolefin or amorphous silica

    for use as a developer in the manufacturing of ink/toner filled bottles or cartridges for facsimile machines, computer printers and copiers (1)

    0 %

    -

    31.12.2017

    ex 3707 90 90

    10

    Anti-reflection coating, consisting of a modified methacrylic polymer, containing by weight not more than 10 % of polymer, in a solution in two or three of the following substances:

    — 2-methoxy-1-methylethyl acetate (CAS RN 108-65-6)

    — 1-methoxypropan-2-ol (CAS RN 107-98-2)

    — ethyl lactate (CAS RN 97-64-3)

    0 %

    -

    31.12.2018

    ex 3707 90 90

    40

    Anti-reflection coating, in the form of an aqueous solution, containing by weight not more than:

    — 2 % of halogen-free alkyl sulphonic acid, and

    — 5 % of a fluorinated polymer

    0 %

    -

    31.12.2019

     (7)ex 3707 90 90

    80

    Anti-reflection coating, consisting of either a siloxane polymer or an organic polymer having a phenolic hydroxy group modified with a chromophore group, in the form of a solution of an organic solvent containing either 1-ethoxy-2-propanol or 2-methoxy-1-methylethyl acetate containing by weight not more than 10 % of polymer

    0 %

    -

    31.12.2020

    ex 3707 90 90

    85

    Rolls, containing:

    — a dry layer of a photosensitive acrylic resin,

    — on one side a poly(ethylene terephthalate) protecting foil, and

    — on the other side a polyethylene protecting foil

    0 %

    -

    31.12.2019

    ex 3801 90 00

    10

    Expandable graphite (CAS RN 90387-90-9 and CAS RN 12777-87-6)

    0 %

    -

    31.12.2016

    ex 3802 90 00

    11

    Soda flux calcinated diatomaceous earth, acid washed, for use as a filter aid in the manufacture of pharmaceutical and/or biochemical products (1)

    0 %

    -

    31.12.2017

    3805 90 10

     

    Pine oil

    1,7%

    -

    31.12.2018

    ex 3806 10 00

    ex 3909 40 00

    20

    50

    Rosin modified phenolic resin,

    — containing 60 % or more but not more than 75 % by weight of rosin,

    — with an acid value of not more than 25,

    of a kind used in offset printing

    0 %

    -

    31.12.2016

    ex 3808 91 90

    10

    Indoxacarb (ISO) and its (R) isomer, fixed on a support of silicon dioxide

    0 %

    -

    31.12.2018

    ex 3808 91 90

    30

    Preparation containing endospores or spores and protein crystals derived from either:

    — Bacillus thuringiensis Berliner subsp. aizawai and kurstaki, or

    — Bacillus thuringiensis subsp. kurstaki, or

    — Bacillus thuringiensis subsp. israelensis, or

    — Bacillus thuringiensis subsp. aizawai, or

    — Bacillus thuringiensis subsp. tenebrionis

    0 %

    -

    31.12.2019

    ex 3808 91 90

    40

    Spinosad (ISO)

    0 %

    -

    31.12.2018

    ex 3808 91 90

    60

    Spinetoram (ISO) (CAS RN 935545-74-7), preparation of two spinosyn components (3′-ethoxy-5,6-dihydro spinosyn J) and (3′-ethoxy- spinosyn L)

    0 %

    -

    31.12.2017

    ex 3808 92 90

    10

    Fungicide in the form of a powder, containing by weight 65 % or more but not more than 75 % of hymexazole (ISO), not put up for retail sale

    0 %

    -

    31.12.2018

    ex 3808 92 90

    30

    Preparation consisting of a suspension of pyrithione zinc (INN) in water, containing by weight:

    — 24 % or more but not more than 26 % of pyrithione zinc (INN), or

    — 39 % or more but not more than 41 % of pyrithione zinc (INN)

    0 %

    -

    31.12.2018

    ex 3808 92 90

    50

    Preparations based on copper pyrithione (CAS RN 14915-37-8)

    0 %

    -

    31.12.2019

    ex 3808 93 15

    10

    Preparation based on a concentrate containing by weight 45 % or more but not more than 55 % of the active herbicidal ingredient Penoxsulam as an aqueous suspension

    0 %

    -

    31.12.2017

    ex 3808 93 23

    10

    Herbicide containing flazasulfuron (ISO) as an active ingredient

    0 %

    -

    31.12.2019

    ex 3808 93 27

    40

    Preparation, consisting of a suspension of tepraloxydim (ISO), containing by weight:

    — 30 % or more of tepraloxydim (ISO), and

    — not more than 70 % of a petroleum fraction consisting of aromatic hydrocarbons

    0 %

    -

    31.12.2016

    ex 3808 93 90

    10

    Preparation, in the form of granules, containing by weight:

    — 38,8 % or more but not more than 41,2 % of Gibberellin A3, or

    — 9,5 % or more but not more than 10,5 % of Gibberellin A4 and A7

    0 %

    -

    31.12.2019

     (7)ex 3808 93 90

    20

    Preparation consisting of benzyl(purin-6-yl)amine in a glycol solution, containing by weight:

    — 1,88 % or more but not more than 2,00 % of benzyl(purin-6-yl)amine

    of a kind used in plant growth regulators

    0 %

    -

    31.12.2020

     (7)ex 3808 93 90

    30

    Aqueous solution containing by weight:

    — 1,8 % of sodium para-nitrophenolate,

    — 1,2 % of sodium ortho-nitrophenolate,

    — 0,6 % of sodium 5-nitroguaiacolate

    for use in the manufacture of a plant growth regulator (1)

    0 %

    -

    31.12.2020

     (7)ex 3808 93 90

    40

    Mixed white powder containing by weight:

    — 3 % or more but not more than 3,6 % of 1-methylcyclopropene with a purity more than 96 %, and

    — containing less than 0,05 % of each impurity of 1-chloro-2-methylpropene and 3-chloro-2-methylpropene

    for use in the manufacture of a growth regulator of post-harvest fruits, vegetables and ornamentals with a specific generator (1)

    0 %

    -

    31.12.2020

     (7)ex 3808 93 90

    50

    Preparation in the form of powder, containing by weight:

    — 55 % or more of Gibberellin A4,

    — 1 % or more but not more than 35 % of Gibberellin A7,

    — 90 % or more of Gibberellin A4 and Gibberellin A7 combined

    — not more than 10 % of a combination of water and other naturally occurring Gibberellins

    of a kind used in plant growth regulators

    0 %

    -

    31.12.2020

    ex 3808 94 20

    30

    Bromochloro-5,5-dimethylimidazolidine-2,4-dione (CAS RN 32718-18-6) containing:

    — 1,3-Dichloro-5,5-dimethylimidazolidine-2,4-dione (CAS RN 118-52-5),

    — 1,3-Dibromo-5,5-dimethylimidazolidine-2,4-dione (CAS RN 77-48-5),

    — 1-Bromo,3-chloro-5,5-dimethylimidazolidine-2,4-dione (CAS RN 16079-88-2), and

    — 1-Chloro,3-bromo-5,5-dimethylimidazolidine-2,4-dione (CAS RN 126-06-7)

    0 %

    -

    31.12.2019

     (7)ex 3808 99 90

    10

    Oxamyl (ISO) (CAS RN 23135-22-0) in a solution of cyclohexanone and water

    0 %

    -

    31.12.2020

    ex 3808 99 90

    20

    Abamectin (ISO) (CAS RN 71751-41-2)

    0 %

    -

    31.12.2018

    ex 3809 91 00

    10

    Mixture of 5-ethyl-2-methyl-2-oxo-1,3,2λ5-dioxaphosphoran-5-ylmethyl methyl methylphosphonate and bis(5-ethyl-2-methyl-2-oxo-1,3,2λ5-dioxaphosphoran-5-ylmethyl) methylphosphonate

    0 %

    -

    31.12.2018

    ex 3809 92 00

    20

    Defoamer, consisting of a mixture of oxydipropanol and 2,5,8,11-tetramethyldodec-6-yn-5,8-diol

    0 %

    -

    31.12.2019

    ex 3810 10 00

    10

    Soldering or welding paste, consisting of a mixture of metals and resin containing by weight:

    — 70 % or more, but not more than 90 % of tin

    — not more than 10 % of one or more metals of silver, copper, bismuth, zinc, or indium

    for use in the electro technical industry (1)

    0 %

    -

    31.12.2018

    ex 3811 19 00

    10

    Solution of more than 61 % but not more than 63 % by weight of methylcyclopentadienyl manganese tricarbonyl in an aromatic hydrocarbon solvent, containing by weight not more than:

    — 4,9 % of 1,2,4-trimethyl-benzene,

    — 4,9 % of naphthalene, and

    — 0,5 % of 1,3,5-trimethyl-benzene

    0 %

    -

    31.12.2019

    ex 3811 21 00

    10

    Salts of dinonylnaphthalenesulphonic acid, in the form of a solution in mineral oils

    0 %

    -

    31.12.2018

    ex 3811 21 00

    13

    Additives containing:

    — borated magnesium (C16-C24) alkylbenzene sulphonates, and

    — mineral oils,

    having a total base number (TBN) of more than 250, but not more than 350, for use in the manufacture of lubricating oils (1)

    0 %

    -

    31.12.2018

    ex 3811 21 00

    15

    Additives, consisting of:

    — zinc bis[bis(tetrapropylenephenyl)] bis(hydrogen dithiophosphate) (CAS RN 11059-65-7),

    — triphenyl thiophosphate (CAS RN 597-82-0),

    — triphenyl phosphite (CAS RN 101-02-0), and

    — mineral oils,

    for use in the manufacture of lubricating oils (1)

    0 %

    -

    31.12.2018

    ex 3811 21 00

    17

    Additives containing:

    — mainly sulphurized diisobutylene,

    — calcium sulphonate,

    — dialkylaminoalkyl polyisobutylene succinate, and

    — mineral oils,

    for use in the manufacture of lubricating oils (1)

    0 %

    -

    31.12.2018

    ex 3811 21 00

    20

    Additives for lubricating oils, based on complex organic molybdenum compounds, in the form of a solution in mineral oil

    0 %

    -

    31.12.2018

    ex 3811 21 00

    25

    Additives containing:

    — a (C8-18) alkyl polymethacrylate copolymer with N-[3-(dimethylamino)propyl]methacrylamide, of an average molecular weight (Mw) of more than 10 000 but not more than 20 000 , and

    — more than 15 %, but not more than 30 % by weight of mineral oils,

    for use in the manufacture of lubricating oils (1)

    0 %

    -

    31.12.2018

    ex 3811 21 00

    27

    Additives containing:

    — 20 % or more by weight of an ethylene-propylene copolymer chemically modified by succinic anhydride groups reacted with 4-(4-nitrophenylazo)aniline and 3-nitroaniline, and

    — mineral oils,

    for use in the manufacture of lubricating oils (1)

    0 %

    -

    31.12.2018

    ex 3811 21 00

    30

    Additives for lubricating oils, containing mineral oils, consisting of calcium salts of reaction products of polyisobutylene substituted phenol with salicylic acid and formaldehyde, used as a concentrated additive for the manufacture of engine oils through a blending process

    0 %

    -

    31.12.2017

    ex 3811 21 00

    33

    Additives containing:

    — calcium salts of heptylphenol reaction products with formaldehyde (CAS RN 84605-23-2), and

    — mineral oils,

    having a total base number (TBN) of more than 40 but not more than 100, for use in the manufacture of lubricating oils or overbased detergents for use in lubricating oils (1)

    0 %

    -

    31.12.2018

    ex 3811 21 00

    35

    Additives containing:

    — o-amino polyisobutylenephenol (CAS RN 78330-13-9),

    — polyisobutylene succinimide (CAS RN 84605-20-9),

    — alkenylimidazoline (CAS RN 68784-17-8),

    — nonylated diphenylamine derivatives (CAS RN 36878-20-3 and CAS RN 27177-41-9), and

    — more than 30 %, but not more than 45 % by weight of mineral oils,

    for use in the manufacture of lubricating oils (1)

    0 %

    -

    31.12.2018

    ex 3811 21 00

    37

    Additives containing:

    — a styrene-maleic anhydride copolymer esterified with C4-C20 alcohols, modified by aminopropylmorpholine, and

    — more than 50 % but not more than 75 % by weight of mineral oils,

    for use in the manufacture of lubricating oils (1)

    0 %

    -

    31.12.2018

    ex 3811 21 00

    45

    Additives containing:

    — an (C8-18) alkyl methacrylate and N-[3-(dimethylamino)propyl]methacrylamide copolymer,

    — an ethylene-propylene copolymer,

    — an ethylene-propylene copolymer chemically modified with succinic anhydride, 4-(4-nitrophenyl) aniline and 3-nitroaniline, and

    — more than 15 % but not more than 30 % by weight of mineral oils,

    whether or not containing a methacrylic pour point depressant polymer, for use in the manufacture of lubricating oils (1)

    0 %

    -

    31.12.2018

    ex 3811 21 00

    48

    Additives containing

    — overbased magnesium (C20-C24) alkylbenzenesulphonates (CAS RN 231297-75-9), and

    — by weight more than 25 % but not more than 50 % of mineral oils,

    having a total base number of more than 350, but not more than 450, for use in the manufacture of lubricating oils (1)

    0 %

    -

    31.12.2018

    ex 3811 21 00

    50

    Additives for lubricating oils,

    — based on calcium C16-24 alkylbenzenesulphonates (CAS RN 70024-69-0),

    — containing mineral oils,

    used as a concentrated additive for the manufacture of engine oils through a blending process

    0 %

    -

    31.12.2017

    ex 3811 21 00

    53

    Additives containing:

    — overbased calcium petroleum sulphonates (CAS 68783-96-0) with a sulphonate content by weight of 15 % or more, but not more than 30 %, and

    — by weight more than 40 % but not more than 60 % of mineral oil,

    having a total base number of 280 or more but not more than 420, for use in the manufacture of lubricating oils (1)

    0 %

    -

    31.12.2019

    ex 3811 21 00

    55

    Additives containing:

    — low base number calcium polypropylbenzenesulphonate (CAS RN 75975-85-8), and

    — by weight more than 40 % but not more than 60 % mineral oils,

    having a total base number of more than 10 but not more than 25, for use in the manufacture of lubricating oils (1)

    0 %

    -

    31.12.2019

    ex 3811 21 00

    57

    Additives containing:

    — a polyisobutylene succinimide based mixture, and

    — more than 40 % but not more than 50 % by weight of mineral oils,

    having a total base number of more than 40, for use in the manufacture of lubricating oils (1)

    0 %

    -

    31.12.2019

    ex 3811 21 00

    60

    Additives for lubricating oils, containing mineral oils,

    — based on calcium polypropylenyl substituted benzenesulphonate (CAS RN 75975-85-8) with a content by weight of 25 % or more but not more than 35 %,

    — with a total base number (TBN) of 280 or more but not more than 320,

    used as a concentrated additive for the manufacture of engine oils through a blending process

    0 %

    -

    31.12.2017

    ex 3811 21 00

    63

    Additives containing:

    — an overbased mixture of calcium petroleum sulphonates (CAS RN 61789-86-4) and synthetic calcium alkylbenzenesulphonates (CAS RN 68584-23-6 and CAS RN 70024-69-0) with a total sulphonate content by weight of 15 % or more, but not more than 25 %, and

    — by weight more than 40 % but not more than 60 % of mineral oils,

    having a total base number of 280 or more but not more than 320, for use in the manufacture of lubricating oils (1)

    0 %

    -

    31.12.2019

    ex 3811 21 00

    65

    Additives containing:

    — a polyisobutylene succinimide based mixture (CAS RN 160610-76-4), and

    — more than 35 % but not more than 50 % by weight of mineral oils,

    having a sulphur content of more than 0,7 % but not more than 1,3 % by weight, having a total base number of more than 8, for use in the manufacture of lubricating oils (1)

    0 %

    -

    31.12.2019

    ex 3811 21 00

    70

    Additives for lubricating oils,

    — containing polyisobutylene succinimide derived from reaction products of polyethylenepolyamines with polyisobutenyl succinic anhydride (CAS RN 84605-20-9),

    — containing mineral oils,

    — with a chlorine content by weight of 0,05 % or more but not more than 0,25 %,

    — with a total base number (TBN) of more than 20,

    used as a concentrated additive for the manufacture of engine oils through a blending process

    0 %

    -

    31.12.2017

    ex 3811 21 00

    73

    Additives containing:

    — borated succinimide compounds (CAS RN 134758-95-5),

    — mineral oils, and

    — having a total base number (TBN) greater than 40,

    for use in the manufacture of additive mixtures for lubricating oils (1)

    0 %

    -

    31.12.2018

     (7)ex 3811 21 00

    75

    Additives containing:

    — Calcium (C10-C14) dialkylbenzenesulfonates,

    — more than 40 %, but not more than 60 % by weight of mineral oils,

    with a total base number of not more than 10, for use in the manufacture of blends of additives for lubricating oils (1)

    0 %

    -

    31.12.2020

     (7)ex 3811 21 00

    77

    Antifoam additives consisting of:

    — a copolymer of 2-ethylhexyl acrylate and ethyl acrylate, and

    — more than 50 % but not more than 80 % by weight of mineral oils

    for use in the manufacture of additive blends for lubricating oils (1)

    0 %

    -

    31.12.2020

     (7)ex 3811 21 00

    80

    Additives containing:

    — polyisobutylene aromatic polyamine succinimide,

    — more than 40 % but not more than 60 % by weight of mineral oils,

    with a nitrogen content of more than 0,6 % but not more than 0,9 % by weight, for use in the manufacture of additive blends for lubricating oils (1)

    0 %

    -

    31.12.2020

     (7)ex 3811 21 00

    83

    Additives containing:

    — polyisobutene succinimide derived from reaction of polyethylenepolyamines with polyisobutenyl succinic anhydride (CAS RN 84605-20-9),

    — containing more than 31,9 % but not more than 43,3 % by weight of mineral oils,

    — not more than 0,05 % by weight chlorine, and

    — having a total base number (TBN) greater than 20,

    for use in the manufacture of additives blends for lubricating oils (1)

    0 %

    -

    31.12.2019

     (7)ex 3811 21 00

    85

    Additives,

    — containing more than 20 % but not more than 45 % by weight of mineral oils,

    — based on a mixture of branched dodecylphenol sulfide calcium salts, whether or not carbonated,

    of a kind used in the manufacture of blends of additives for lubricating oils

    0 %

    -

    31.12.2017

    ex 3811 29 00

    15

    Additives containing:

    — products from the reaction of branched heptyl phenol with formaldehyde, carbon disulphide and hydrazine (CAS RN 93925-00-9), and

    — by weight more than 15 % but not more than 28 % of light aromatic petroleum naphtha solvent,

    for use in the manufacture of lubricating oils (1)

    0 %

    -

    31.12.2019

    ex 3811 29 00

    20

    Additives for lubricating oils, consisting of reaction products of bis(2-methylpentan-2-yl)dithiophosphoric acid with propylene oxide, phosphorus oxide, and amines with C12-14 alkyl chains, used as a concentrated additive for the manufacture of lubricating oils

    0 %

    -

    31.12.2017

    ex 3811 29 00

    25

    Additives containing at least salts of primary amines and mono- and di-alkylphosphoric acids, for use in the manufacture of lubricating oils (1)

    0 %

    -

    31.12.2019

    ex 3811 29 00

    30

    Additives for lubricating oils, consisting of reaction products of butyl-cyclohex-3-enecarboxylate, sulphur and triphenyl phosphite (CAS RN 93925-37-2), used as a concentrated additive for the manufacture of engine oils through a blending process

    0 %

    -

    31.12.2017

    ex 3811 29 00

    35

    Additives consisting of an imidazoline based mixture (CAS RN 68784-17-8), for use in the manufacture of lubricating oils (1)

    0 %

    -

    31.12.2019

    ex 3811 29 00

    40

    Additives for lubricating oils, consisting of reaction products of 2-methyl-prop-1-ene with sulphur monochloride and sodium sulphide (CAS RN 68511-50-2), with a chlorine content by weight of 0,01 % or more but not more than 0,5 %, used as a concentrated additive for the manufacture of lubricating oils

    0 %

    -

    31.12.2017

    ex 3811 29 00

    45

    Additives consisting of a mixture of (C7-C9) dialkyl adipates, in which diisooctyl adipate (CAS RN 1330-86-5) is more than 85 % by weight of the mixture, for use in the manufacture of lubricating oils (1)

    0 %

    -

    31.12.2019

    ex 3811 29 00

    50

    Additives for lubricating oils, consisting of a mixture of N,N-dialkyl -2-hydroxyacetamides with alkyl chain lengths between 12 and 18 carbon atoms (CAS RN 866259-61-2), used as a concentrated additive for the manufacture of engine oils through a blending process

    0 %

    -

    31.12.2017

    ex 3811 29 00

    55

    Additives consisting of reaction products of diphenylamine and branched nonenes with:

    — by weight more than 28 % but not more than 35 % 4-monononyldiphenylamine, and

    — by weight more than 50 % but not more than 65 % 4,4′-dinonyldiphenylamine,

    — by weight a total percentage of 2, 4-dinonyldiphenylamine and 2, 4′-dinonyldiphenylamine of not more than 5 %,

    used for the manufacture of lubricating oils (1)

    0 %

    -

    31.12.2019

    ex 3811 29 00

    60

    Additives containing:

    — mainly sulphurized diisobutylene,

    — calcium sulphonate, and

    — dialkylaminoalkyl polyisobutylene succinate

    for use in the manufacture of lubricating oils (1)

    0 %

    -

    31.12.2018

     (7)ex 3811 29 00

    65

    Additives consisting of a sulphurised mixture of vegetable oil, long chain α-olefins and tall oil fatty acids, with a sulphur content of 8 % or more but not more than 12 % by weight, for use in the manufacture of blends of additives for lubricating oils (1)

    0 %

    -

    31.12.2020

    ex 3811 29 00

    70

    Additives consisting of dialkylphosphites (in which the alkyl groups contain more than 80 % by weight of oleyl, palmityl and stearyl groups), for use in the manufacture of lubricating oils (1)

    0 %

    -

    31.12.2018

    ex 3811 29 00

    80

    Additives containing:

    — more than 70 % by weight of 2,5-bis(tert-nonyldithio)-[1,3,4]-thiadiazole (CAS RN 89347-09-1), and

    — more than 15 % by weight of 5-(tert-nonyldithio)- 1,3,4-thiadiazole-2(3H)-thione (CAS RN 97503-12-3),

    for use in the manufacture of lubricating oils (1)

    0 %

    -

    31.12.2018

    ex 3811 29 00

    85

    Additives consisting of a mixture of 3-((C9-11)-isoalkyloxy)tetrahydrothiophene 1,1-dioxide, C10-rich (CAS RN 398141-87-2), for use in the manufacture of lubricating oils (1)

    0 %

    -

    31.12.2018

    ex 3811 90 00

    10

    Dinonylnaphthylsulphonic acid salt, in a mineral oil solution

    0 %

    -

    31.12.2018

    ex 3811 90 00

    40

    Solution of a quaternary ammonium salt based on polyisobutenyl succinimide, containing by weight 20 % or more but not more than 29,9 % 2-ethylhexanol

    0 %

    -

    31.12.2017

    ex 3812 10 00

    10

    Rubber accelerator based on diphenyl guanidine granules (CAS RN 102-06-7)

    0 %

    -

    31.12.2016

    ex 3812 20 90

    10

    Plasticiser, containing:

    — bis(2-ethylhexyl)-1,4-benzene dicarboxylate (CAS RN 6422-86-2)

    — more than 10 % but not more than 60 % by weight of dibutylterephthalate (CAS RN 1962-75-0)

    0 %

    -

    31.12.2018

    ex 3812 30 29

    10

    4,4′-Isopropylidenediphenol C12-15 alcohol phosphite containing by weight 1 % or more but not more than 3 % of bisphenol A (CAS RN 96152-48-6)

    0 %

    -

    31.12.2019

    ex 3812 30 80

    20

    Mixture containing predominantly bis(2,2,6,6-tetramethyl-1-octyloxy-4-piperidyl) sebacate

    0 %

    -

    31.12.2018

    ex 3812 30 80

    25

    UV photo stabiliser containing:

    — α-[3-[3-(2H-Benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]-ω-hydroxypoly(oxy-1,2-ethanediyl) (CAS RN 104810-48-2)

    — α-[3-[3-(2H-Benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]-ω-[3-[3-(2H-benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropoxy]poly (oxy-1,2-ethanediyl) (CAS RN 104810-47-1)

    — polyethylene glycol of a weight average molecular weight (Mw) of 300 (CAS RN 25322-68-3)

    — bis (1,2,2,6,6-pentamethyl-4-piperidyl)sebacate (CAS RN 41556-26-7), and

    — methyl-1,2,2,6,6-pentamethyl-4- piperidyl sebacate (CAS RN 82919-37-7)

    0 %

    -

    31.12.2018

    ex 3812 30 80

    30

    Compound stabilisers containing by weight 15 % or more but not more than 40 % of sodium perchlorate and not more than 70 % of 2-(2-methoxyethoxy)ethanol

    0 %

    -

    31.12.2019

    ex 3812 30 80

    35

    Mixture containing by weight:

    — 25 % or more but not more than 50 % of a mixture of C15-18 tetramethylpiperidinyl esters (CAS RN 86403-32-9)

    — not more than 20 % of other organic compounds

    — on a carrier of polypropylene (CAS RN 9003-07-0)

    0 %

    -

    31.12.2018

    ex 3812 30 80

    40

    Mixture of:

    — 80 % (± 10 %) by weight of 2-ethylhexyl 10-ethyl-4,4-dimethyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate, and

    — 20 % (± 10 %) by weight of 2-ethylhexyl 10-ethyl-4-[[2-[(2-ethylhexyl)oxy]-2-oxoethyl]thio]-4-methyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate

    0 %

    -

    31.12.2018

    ex 3812 30 80

    55

    UV-stabilizer, containing:

    — 2-(4,6-bis(2,4-dimethylphenyl)-1,3,5-triazin-2-yl)-5-(octyloxy)-phenol (CAS RN 2725-22-6), and

    — either N,N′-bis(1,2,2,6,6-pentamethyl-4-piperidinyl)-1,6-hexanediamine, polymer with 2,4- dichloro-6-(4-morpholinyl)-1,3,5-triazine (CAS RN 193098-40-7), or

    — N,N′-bis(2,2,6,6-tetramethyl-4-piperidinyl)-1,6-hexanediamine, polymer with 2,4- dichloro-6-(4-morpholinyl)-1,3,5-triazine (CAS RN 82451-48-7)

    0 %

    -

    31.12.2016

    ex 3812 30 80

    60

    Light stabiliser, consisting of branched and linear alkyl esters of 3-(2H-Benzotriazolyl)-5-(1,1-di-methylethyl)-4-hydroxy-benzenepropanoic acid (CAS RN 127519-17-9)

    0 %

    -

    31.12.2016

    ex 3812 30 80

    65

    Stabiliser for plastic material containing:

    — 2-ethylhexyl 10-ethyl-4,4-dimethyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate (CAS RN 57583-35-4),

    — 2-ethylhexyl 10-ethyl-4-[[2-[(2-ethylhexyl)oxy]-2-oxoethyl]thio]-4-methyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate (CAS RN 57583-34-3), and

    — 2-ethylhexyl mercaptoacetate (CAS RN 7659-86-1)

    0 %

    -

    31.12.2016

    ex 3812 30 80

    70

    Light stabiliser containing:

    — branched and linear alkyl esters of 3-(2H-benzotriazolyl)-5-(1,1-dimethylethyl)-4-hydroxybenzenepropanoic acid (CAS RN 127519-17-9), and

    — 1-methoxy-2-propyl acetate (CAS RN 108-65-6)

    0 %

    -

    31.12.2016

    ex 3812 30 80

    80

    UV-stabilizer, consisting of:

    — a hindered amine: N,N′-bis(1,2,2,6,6-pentamethyl-4-piperidinyl)-1,6-hexanediamine, polymer with 2,4- dichloro-6-(4-morpholinyl)-1,3,5-triazine (CAS RN 193098-40-7), and

    — either an o-hydroxyphenyl triazine UV light absorber, or

    — a chemically modified phenolic compound

    0 %

    -

    31.12.2017

    ex 3814 00 90

    20

    Mixture containing by weight:

    — 69 % or more but not more than 71 % of 1-methoxypropan-2-ol,

    — 29 % or more but not more than 31 % of 2-methoxy-1-methylethyl acetate

    0 %

    -

    31.12.2018

    ex 3814 00 90

    40

    Azeotrope mixtures containing isomers of nonafluorobutyl methyl ether and/or nonafluorobutyl ethyl ether

    0 %

    -

    31.12.2018

    ex 3815 12 00

    10

    Catalyst, in the form of granules or rings of a diameter of 3 mm or more but not more than 10 mm, consisting of silver on an aluminium oxide support and containing by weight 8 % or more but not more than 40 % of silver

    0 %

    -

    31.12.2018

    ex 3815 19 90

    10

    Catalysts consisting of chromium trioxide, dichromium trioxide or organometallic compounds of chromium, fixed on a silicon dioxide support with a pore volume of 2 cm3/g or more (as determined by the nitrogen absorption method)

    0 %

    -

    31.12.2016

    ex 3815 19 90

    15

    Catalyst, in the form of a powder, consisting of a mixture of metal oxides fixed on a support of silicon dioxide, containing by weight 20 % or more but not more than 40 % of molybdenum, bismuth and iron evaluated together, for use in the manufacture of acrylonitrile (1)

    0 %

    -

    31.12.2018

     (7)ex 3815 19 90

    20

    Catalyst,

    — in the form of solid spheres,

    — of a diameter of 4 mm or more but not more than 12 mm, and

    — consisting of a mixture of molybdenum oxide and other metal oxides, supported on silicon dioxide and/or aluminium oxide,

    for use in the manufacture of acrylic acid (1)

    0 %

    -

    31.12.2018

    ex 3815 19 90

    25

    Catalyst in the form of spheres of a diameter of 4,2 mm or more but not more than 9 mm, consisting of a mixture of metal oxides containing predominantly oxides of molybdenum, nickel, cobalt and iron, on a support of aluminium oxide, for use in the manufacture of acrylic aldehyde (1)

    0 %

    -

    31.12.2018

    ex 3815 19 90

    30

    Catalyst containing titanium tetrachloride supported on magnesium dichloride, for use in the manufacture of polypropylene (1)

    0 %

    -

    31.12.2018

    ex 3815 19 90

    65

    Catalyst consisting of phosphoric acid chemically bonded to a support of silicon dioxide

    0 %

    -

    31.12.2018

    ex 3815 19 90

    70

    Catalyst consisting of organo-metallic compounds of aluminium and zirconium, fixed on a support of silicon dioxide

    0 %

    -

    31.12.2018

    ex 3815 19 90

    75

    Catalyst consisting of organo-metallic compounds of aluminium and chromium, fixed on a support of silicon dioxide

    0 %

    -

    31.12.2018

    ex 3815 19 90

    80

    Catalyst consisting of organo-metallic compounds of magnesium and titanium, fixed on a support of silicon dioxide, in the form of a suspension in mineral oil

    0 %

    -

    31.12.2018

    ex 3815 19 90

    85

    Catalyst consisting of organo-metallic compounds of aluminium, magnesium and titanium, fixed on a support of silicon dioxide, in the form of powder

    0 %

    -

    31.12.2018

    ex 3815 19 90

    86

    Catalyst containing titanium tetrachloride supported on magnesium dichloride, for use in the manufacture of polyolefins (1)

    0 %

    -

    31.12.2018

    ex 3815 19 90

    ex 8506 90 00

    87

    10

    Cathode, in rolls, for air zinc button cell batteries (hearing aid batteries) (1)

    0 %

    -

    31.12.2016

    ex 3815 90 90

    16

    Initiator based on dimethylaminopropyl urea

    0 %

    -

    31.12.2017

    ex 3815 90 90

    18

    Oxidation catalyst with an active ingredient of di[manganese (1+)], 1,2-bis(octahydro-4,7-dimethyl-1H-1,4,7-triazonine-1-yl-kN1, kN4, kN7)ethane-di-μ-oxo-μ-(ethanoato-kO, kO′)-, di[chloride(1-)], used to accelerate chemical oxidation or bleaching (CAS RN 1217890-37-3)

    0 %

    -

    31.12.2017

    ex 3815 90 90

    20

    Catalyst, in powder form, consisting of a mixture of titanium trichloride and aluminium chloride, containing by weight:

    — 20 % or more but not more than 30 % of titanium, and

    — 55 % or more but not more than 72 % of chlorine

    0 %

    -

    31.12.2018

     (7)ex 3815 90 90

    30

    Catalyst, consisting of a suspension in mineral oil of:

    — tetrahydrofuran complexes of magnesium chloride and titanium(III) chloride, and

    — silicon dioxide

    — containing 6,6 % (± 0,6 %) by weight of magnesium, and

    — containing 2,3 % (± 0,2 %) by weight of titanium

    0 %

    -

    31.12.2020

    ex 3815 90 90

    33

    Catalyst, consisting of a mixture of different alkylnaphthalene sulphonic acids, with aliphatic hydrocarbon chains, containing 12 – 56 carbon atoms

    0 %

    -

    31.12.2018

     (7)ex 3815 90 90

    40

    Catalyst:

    — containing molybdenum oxide and other metal oxides in a silicon dioxide matrix,

    — in the form of hollow cylindrical solids of a length of 4 mm or more but not more than 12 mm

    for use in the manufacture of acrylic acid (1)

    0 %

    -

    31.12.2018

    ex 3815 90 90

    50

    Catalyst containing titanium trichloride, in the form of a suspension in hexane or heptane containing by weight, in the hexane- or heptane-free material, 9 % or more but not more than 30 % of titanium

    0 %

    -

    31.12.2018

    ex 3815 90 90

    70

    Catalyst, consisting of a mixture of (2-hydroxypropyl)trimethylammonium formate and dipropylene glycols

    0 %

    -

    31.12.2019

    ex 3815 90 90

    71

    Catalyst, containing N-(2-hydroxypropylammonium)diazabicyclo (2,2,2) octane-2-ethyl hexanoate, dissolved in ethane-1,2-diol

    0 %

    -

    31.12.2016

     (7)ex 3815 90 90

    80

    Catalyst consisting predominantly of dinonylnaphthalenedisulphonic acid in the form of a solution in isobutanol

    0 %

    -

    31.12.2020

    ex 3815 90 90

    81

    Catalyst, containing by weight 69 % or more but not more than 79 % of (2-hydroxy-1-methylethyl)trimethylammonium 2-ethylhexanoate

    0 %

    -

    31.12.2018

    ex 3815 90 90

    85

    Catalyst based on aluminosilicate (zeolite), for the alkylation of aromatic hydrocarbons, for the transalkylation of alkylaromatic hydrocarbons or for the oligomerization of olefins (1)

    0 %

    -

    31.12.2017

    ex 3815 90 90

    86

    Catalyst, in the form of rodlets, consisting of an aluminosilicate (zeolite), containing by weight 2 % or more but not more than 3 % of rare-earth metal oxides and less than 1 % of disodium oxide

    0 %

    -

    31.12.2018

    ex 3815 90 90

    88

    Catalyst, consisting of titanium tetrachloride and magnesium chloride, containing by weight on an oil- and hexane-free basis:

    — 4 % or more but not more than 10 % of titanium, and

    — 10 % or more but not more than 20 % magnesium

    0 %

    -

    31.12.2018

    ex 3815 90 90

    89

    Rhodococcus rhodocrous J1 bacteria, containing enzymes, suspended in a polyacrylamide gel or in water, for use as a catalyst in the production of acrylamide by the hydration of acrylonitrile (1)

    0 %

    -

    31.12.2016

    ex 3817 00 50

    10

    Mixture of alkylbenzenes (C14-26) containing by weight:

    — 35 % or more but not more than 60 % of eicosylbenzene,

    — 25 % or more but not more than 50 % of docosylbenzene,

    — 5 % or more but not more than 25 % of tetracosylbenzene

    0 %

    -

    31.12.2018

    ex 3817 00 80

    10

    Mixture of alkylnaphthalenes, containing by weight:

    — 88 % or more but not more than 98 % of hexadecylnaphthalene

    — 2 % or more but not more than 12 % of dihexadecylnaphthalene

    0 %

    -

    31.12.2018

    ex 3817 00 80

    20

    Mixture of branched alkyl benzenes mainly containing dodecyl benzenes

    0 %

    -

    31.12.2018

    ex 3817 00 80

    30

    Mixed alkylnaphthalenes, modified with aliphatic chains, of a chain-length varying from 12 to 56 carbon atoms

    0 %

    -

    31.12.2016

    ex 3819 00 00

    20

    Fire resistant hydraulic fluid based on phosphate ester

    0 %

    -

    31.12.2018

    ex 3823 19 30

    ex 3823 19 30

    20

    30

    Palm fatty acid distillate, whether or not hydrogenated, with free fatty acid content 80 % or more for use in the manufacture of:

    — industrial monocarboxylic fatty acids of heading 3823 ,

    — stearic acid of heading 3823 ,

    — stearic acid of heading 2915 ,

    — palmitic acid of heading 2915 , or

    — animal feed preparations of heading 2309  (1)

    0 %

    -

    31.12.2018

    ex 3823 19 90

    ex 3823 19 90

    20

    30

    Palm acid oils from refining for use in the manufacture of:

    — industrial monocarboxylic fatty acids of heading 3823 ,

    — stearic acid of heading 3823 ,

    — stearic acid of heading 2915 ,

    — palmitic acid of heading 2915 , or

    — animal feed preparations of heading 2309  (1)

    0 %

    -

    31.12.2018

    ex 3824 90 15

    10

    Acid aluminosilicate (artificial zeolite of the Y type) in the sodium form, containing by weight not more than 11 % of sodium evaluated as sodium oxide, in the form of rodlets

    0 %

    -

    31.12.2018

    ex 3824 90 92

    32

    Mixture of divinylbenzene-isomers and ethylvinylbenzene-isomers, containing by weight 56 % or more but not more than 85 % of divinylbenzene (CAS RN 1321-74-0)

    0 %

    -

    31.12.2019

    ex 3824 90 92

    ex 3824 90 93

    33

    40

    Anti-corrosion preparations consisting of salts of dinonylnaphthalenesulphonic acid, either:

    — on a support of mineral wax, whether or not modified chemically, or

    — in the form of a solution in an organic solvent

    0 %

    -

    31.12.2018

    ex 3824 90 92

    34

    Oligomer of tetrafluoroethylene, having one iodoethyl end-group

    0 %

    -

    31.12.2018

    ex 3824 90 92

    35

    Preparations containing not less than 92 % but not more than 96,5 % by weight of 1,3:2,4-bis-O-(4-methylbenzylidene)-D-glucitol and also containing carboxylic acid derivatives and an alkyl sulphate

    0 %

    -

    31.12.2016

    ex 3824 90 92

    36

    Calcium phosphonate phenate, dissolved in mineral oil

    0 %

    -

    31.12.2016

    ex 3824 90 92

    37

    Mixture of acetates of 3-butylene-1,2-diol with a content by weight of 65 % or more but not more than 90 %

    0 %

    -

    31.12.2018

    ex 3824 90 92

    39

    Preparations containing not less than 47 % by weight of 1,3:2,4-bis-O-benzylidene-D-glucitol

    0 %

    -

    31.12.2016

    ex 3824 90 92

    42

    Preparation of tetrahydro-α-(1-naphthylmethyl)furan-2-propionic acid (CAS RN 25379-26-4) in toluene

    0 %

    -

    31.12.2018

     (7)ex 3824 90 92

    44

    Preparation containing by weight:

    — 85 % or more but not more than 95 % of α-4-(2-cyano-2-butoxycarbonyl)vinyl-2-methoxy-phenyl-ω-hydroxyhexa(oxyethylene), and

    — 5 % or more but not more than 15 % of polyoxyethylene (20) sorbitan monopalmitate

    0 %

    -

    31.12.2020

    ex 3824 90 92

    45

    Preparation consisting predominantly of γ-butyrolactone and quaternary ammonium salts, for the manufacture of electrolytic capacitors (1)

    0 %

    -

    31.12.2018

     (7)ex 3824 90 92

    46

    Diethylmethoxyborane (CAS RN 7397-46-8) in the form of a solution in tetrahydrofuran

    0 %

    -

    31.12.2020

    ex 3824 90 92

    47

    Preparation, containing:

    — trioctylphosphine oxide (CAS RN 78-50-2),

    — dioctylhexylphosphine oxide (CAS RN 31160-66-4),

    — octyldihexylphosphine oxide (CAS RN 31160-64-2), and

    — trihexylphosphine oxide (CAS RN 3084-48-8)

    0 %

    -

    31.12.2016

    ex 3824 90 92

    48

    Mixture of:

    — 3,3-bis(2-methyl-1-octyl-1H-indol-3-yl)phthalide (CAS RN 50292-95-0), and

    — ethyl-6′-(diethylamino)-3-oxo-spiro-[isobenzofuran-1(3H),9′-[9H]xanthene]-2′-carboxylate (CAS RN 154306-60-2)

    0 %

    -

    31.12.2017

    ex 3824 90 92

    49

    Preparation based on 2,5,8,11-tetramethyl-6-dodecyn-5,8-diol ethoxylate (CAS RN 169117-72-0)

    0 %

    -

    31.12.2017

    ex 3824 90 92

    50

    Alkyl carbonate-based preparation, also containing a UV absorber, for use in the manufacture of spectacle lenses (1)

    0 %

    -

    31.12.2017

    ex 3824 90 92

    51

    Mixture containing by weight 40 % or more but not more than 50 % of 2-hydroxyethyl methacrylate and 40 % or more but not more than 50 % of glycerol ester of boric acid

    0 %

    -

    31.12.2018

    ex 3824 90 92

    53

    Preparations consisting predominantly of ethylene glycol and:

    — either diethylene glycol, dodecandioic acid and ammonia water,

    — or N,N-dimethylformamide,

    — or γ-butyrolactone,

    — or silicon oxide,

    — or ammonium hydrogen azelate,

    — or ammonium hydrogen azelate and silicon oxide,

    — or dodecandioic acid, ammonia water and silicon oxide,

    for the manufacture of electrolytic capacitors (1)

    0 %

    -

    31.12.2018

     (7)ex 3824 90 92

    54

    Poly(tetramethylene glycol) bis[(9-oxo-9H-thioxanthen-1-yloxy)acetate] with an average polymer chain length of less than 5 monomer units (CAS RN 813452-37-8)

    0 %

    -

    31.12.2016

    ex 3824 90 92

    55

    Additives for paints and coatings, containing:

    — a mixture of esters of phosphoric acid obtained from the reaction of phosphoric anhydride with 4-(1,1-dimethylpropyl) phenol and copolymers of styrene-allyl alcohol (CAS RN 84605-27-6), and

    — 30 % or more but not more than 35 % by weight of isobutyl alcohol

    0 %

    -

    31.12.2018

    ex 3824 90 92

    56

    Poly(tetramethylene glycol) bis[(2-benzoyl-phenoxy)acetate] with an average polymer chain length of less than 5 monomer units

    0 %

    -

    31.12.2019

    ex 3824 90 92

    57

    Poly(ethylene glycol) bis(p-dimethyl)aminobenzoate with an average polymer chain length of less than 5 monomer units

    0 %

    -

    31.12.2019

    ex 3824 90 92

    58

    2-Hydroxybenzonitrile, in the form of a solution in N,N-dimethylformamide, containing by weight 45 % or more but not more than 55 % of 2-hydroxybenzonitrile

    0 %

    -

    31.12.2018

    ex 3824 90 92

    59

    Potassium tert-butanolate (CAS RN 865-47-4) in the form of a solution in tetrahydrofuran

    0 %

    -

    31.12.2018

     (7)ex 3824 90 92

    60

    N2-[1-(S)-Ethoxycarbonyl-3-phenylpropyl]-N6-trifluoroacetyl-L-lysyl-N2-carboxy anhydride in a solution of dichloromethane at 37 %

    0 %

    -

    31.12.2020

     (7)ex 3824 90 92

    61

    3′,4′,5′-Trifluorobiphenyl-2-amine, in the form of a solution in toluene containing by weight 80 % or more but not more than 90 % of 3′,4′,5′-trifluorobiphenyl-2-amine

    0 %

    -

    31.12.2020

    ex 3824 90 92

    62

    α-Phenoxycarbonyl-ω-phenoxypoly[oxy(2,6-dibromo-1,4-phenylene) isopropylidene(3,5-dibromo-1,4-phenylene)oxycarbonyl]

    0 %

    -

    31.12.2018

    ex 3824 90 92

    64

    Preparation containing by weight:

    — 89 % or more but not more than 98,9 % of 1,2,3-trideoxy-4,6:5,7-bis-O-[(4-propylphenyl)methylene]-nonitol

    — 0,1 % or more but not more than 1 % of colourants

    — 1 % or more but not more than 10 % of fluoropolymers

    0 %

    -

    31.12.2016

    ex 3824 90 92

    65

    Mixture of primary tert-alkylamines

    0 %

    -

    31.12.2019

     (7)ex 3824 90 92

    68

    Preparation containing by weight:

    — 20 % (± 1 %) ((3-(sec-butyl)-4-(decyloxy)phenyl)methanetriyl) Tribenzene (CAS RN 1404190-37-9),

    Dissolved in:

    — 10 % (± 5 %) 2-sec-Butylphenol (CAS RN 89-72-5)

    — 64 %(± 7 %) Solvent naphtha (petroleum), heavy aromatic (CAS RN 64742-94-5) and

    — 6 % (± 1,0 %) Naphthalene (CAS RN 91-20-3)

    0 %

    -

    31.12.2020

     (7)ex 3824 90 92

    69

    Preparation containing by weight:

    — 80 % or more but not more than 92 % of Bisphenol-A bis(diphenyl phosphate) (CAS RN 5945-33-5)

    — 7 % or more but not more than 20 % oligomers of Bisphenol-A phenol phosphate, and

    — not more than 1 % triphenyl phosphite (CAS RN 101-02-0)

    0 %

    -

    31.12.2020

    ex 3824 90 92

    70

    Mixture of 80 % (± 10 %) of 1-[2-(2-aminobutoxy)ethoxy]but-2-ylamine and 20 % (± 10 %) of 1-({[2-(2-aminobutoxy)ethoxy]methyl} propoxy)but-2-ylamine

    0 %

    -

    31.12.2019

    ex 3824 90 92

    72

    N-(2-Phenylethyl)-1,3-benzenedimethanamine derivatives (CAS RN 404362-22-7)

    0 %

    -

    31.12.2018

    ex 3824 90 92

    73

    α-(2,4,6-Tribromophenyl)-ω-(2,4,6-tribromophenoxy)poly[oxy(2,6-dibromo-1,4-phenylene)isopropylidene(3,5-dibromo-1,4-phenylene)oxycarbonyl]

    0 %

    -

    31.12.2018

    ex 3824 90 92

    74

    C6-24 and C16-18-Unsaturated fatty acid esters with sucrose (sucrose polysoyate) (CAS RN 93571-82-5)

    0 %

    -

    31.12.2018

    ex 3824 90 92

    ex 3906 90 90

    75

    87

    Aqueous solution of polymers and ammonia consisting of:

    — 0,1 % or more but not more than 0,5 % by weight of ammonia (CAS RN 1336-21-6), and

    — 0,3 % or more but not more than 10 % by weight of polycarboxylate (linear polymers of acrylic acid)

    0 %

    -

    31.12.2018

     (7)ex 3824 90 92

    76

    Preparation containing:

    — 74 % or more but not more than 90 % by weight of (S)-α-hydroxy-3-phenoxy-benzeneacetonitrile (CAS RN 61826-76-4), and

    — 10 % or more but not more than 26 % by weight of toluene (CAS RN 108-88-3)

    0 %

    -

    31.12.2018

    ex 3824 90 92

    78

    Preparation containing by weight either 10 % or more but not more than 20 % of lithiumfluorophosphate or 5 % or more but not more than 10 % of lithium perchlorate in mixtures of organic solvents

    0 %

    -

    31.12.2018

    ex 3824 90 92

    80

    Diethylene glycol propylene glycol triethanolamine titanate complexes (CAS RN 68784-48-5) dissolved in diethylene glycol (CAS RN 111-46-6)

    0 %

    -

    31.12.2017

    ex 3824 90 92

    81

    Preparation consisting of:

    — 50 % (± 2 %) by weight of bis-alkoxylated ethyl acetoacetate aluminium chelates,

    — in an ink oil (white mineral) solvent

    with a boiling point of 160 °C or more but not more than 180 °C

    0 %

    -

    31.12.2018

    ex 3824 90 92

    82

    T-butylchloride dimethylsilane (CAS RN 18162-48-6) solution in toluene

    0 %

    -

    31.12.2019

    ex 3824 90 92

    83

    Preparation, consisting of two or more of the following glycols:

    — dipropylene glycol

    — tripropylene glycol

    — tetrapropylene glycol, or

    — pentapropylene glycol

    0 %

    -

    31.12.2017

     (7)ex 3824 90 92

    84

    Preparation consisting by weight of 83 % or more of 3a,4,7,7a-tetrahydro-4,7-methanoindene (dicyclopentadiene), a synthetic rubber, whether or not containing by weight 7 % or more of tricyclopentadiene, and:

    — either an aluminium-alkyl compound,

    — or an organic complex of tungsten

    — or an organic complex of molybdenum

    0 %

    -

    31.12.2018

    ex 3824 90 92

    ex 3824 90 93

    86

    57

    Liquid crystal mixture for use in the manufacture of displays (1)

    0 %

    -

    31.12.2017

     (7)ex 3824 90 92

    88

    2,4,7,9-Tetramethyldec-5-yne-4,7-diol, hydroxyethylated

    0 %

    -

    31.12.2020

    ex 3824 90 93

    35

    Paraffin with a level of chlorination of 70 % or more

    0 %

    -

    31.12.2019

    ex 3824 90 93

    42

    Mixture of bis{4-(3-(3-phenoxycarbonylamino)tolyl)ureido}phenylsulphone, diphenyltoluene-2,4-dicarbamate and 1-[4-(4-aminobenzenesulphonyl)-phenyl]-3-(3-phenoxycarbonylamino-tolyl)-urea

    0 %

    -

    31.12.2018

    ex 3824 90 93

    53

    Zinc dimethacrylate (CAS RN 13189-00-9), containing not more than 2,5 % by weight of 2,6-di-tert-butyl-alpha-dimethyl amino-p-cresol (CAS RN 88-27-7), in the form of powder

    0 %

    -

    31.12.2018

    ex 3824 90 93

    63

    Mixture of phytosterols, not in the form of powder, containing by weight:

    — 75 % or more of sterols,

    — not more than 25 % of stanols,

    for use in the manufacture of stanols/sterols or stanol/sterol esters (1)

    0 %

    -

    31.12.2017

    ex 3824 90 93

    70

    Oligomeric reaction product, consisting of bis(4-hydroxyphenyl) sulfone and 1,1′-oxybis(2-chloroethane)

    0 %

    -

    31.12.2019

    ex 3824 90 93

    73

    Oligomer of tetrafluoroethylene, having tetrafluoroiodoethyl end-groups

    0 %

    -

    31.12.2018

    ex 3824 90 93

    75

    Mixture of phytosterols, in the form of flakes and balls, containing by weight 80 % or more of sterols and not more than 4 % of stanols

    0 %

    -

    31.12.2019

    ex 3824 90 93

    77

    Powder mixture containing by weight:

    — 85 % or more of zinc diacrylate (CAS RN 14643-87-9)

    — and not more than 5 % of 2,6-di-tert-butyl-alpha-dimethylamino-p-cresol (CAS RN 88-27-7)

    0 %

    -

    31.12.2018

    ex 3824 90 93

    ex 3824 90 96

    80

    67

    Film containing oxides of barium or calcium combined with either oxides of titanium or zirconium, in an acrylic binding material

    0 %

    -

    31.12.2019

    ex 3824 90 93

    ex 3824 90 96

    83

    85

    Preparation containing:

    — C,C′-azodi(formamide) (CAS RN 123-77-3),

    — magnesium oxide (CAS RN 1309-48-4), and

    — zinc bis(p-toluene sulphinate) (CAS RN 24345-02-6)

    in which the gas formation from C,C′-azodi(formamide) occurs at 135 °C

    0 %

    -

    31.12.2017

    ex 3824 90 93

    ex 3824 90 96

    85

    57

    Particles of silicon dioxide on which are covalently bonded organic compounds, for use in the manufacture of high performance liquid chromatography columns (HPLC) and sample preparation cartridges (1)

    0 %

    -

    31.12.2018

     (7)ex 3824 90 93

    ex 3824 90 96

    87

    44

    Non halogenated Flame retardant containing by weight:

    — 50 % (± 2 %) Polyamide 6 (CAS RN 25038-54-4), and

    — 50 % (± 2 %) red Phosphorus (CAS RN 7723-14-0)

    0 %

    -

    31.12.2020

     (7)ex 3824 90 93

    88

    Mixture of phytosterols derived from wood and wood based oils (tall oil), in the form of powder, containing by weight:

    — 60 % or more, but not more than 80 % of sitosterols,

    — not more than 15 % of campesterols,

    — not more than 5 % of stigmasterols, and

    — not more than 15 % of betasitostanols

    0 %

    -

    31.12.2017

    ex 3824 90 96

    35

    Calcined bauxite (refractory grade)

    0 %

    -

    31.12.2018

    ex 3824 90 96

    37

    Structured silica alumina phosphate

    0 %

    -

    31.12.2019

    ex 3824 90 96

    43

    Aqueous dispersion, containing by weight:

    — 76 % (± 0,5 %) of silicon carbide (CAS RN 409-21-2)

    — 4,6 % (± 0,05 %) of aluminium oxide (CAS RN 1344-28-1), and

    — 2,4 % (± 0,05 %) of yttrium oxide (CAS RN 1314-36-9)

    0 %

    -

    31.12.2016

    ex 3824 90 96

    45

    Mixture of:

    — basic zirconium carbonate (CAS RN 57219-64-4), and

    — cerium carbonate (CAS RN 537-01-9)

    0 %

    -

    31.12.2016

     (7)ex 3824 90 96

    46

    Manganese zinc ferrite granulate, containing by weight:

    — 52 % or more but not more than 56 % of iron(III)oxide,

    — 25 % or more but not more than 42 % of manganese(II) oxide, and

    — 3,5 % or more but not more than 22 % of zinc oxide

    0 %

    -

    31.12.2020

    ex 3824 90 96

    47

    Mixed metals oxides, in the form of powder, containing by weight:

    — either 5 % or more of barium, neodymium or magnesium and 15 % or more of titanium,

    — or 30 % or more of lead and 5 % or more of niobium,

    for use in the manufacture of dielectric films or for use as dielectric materials in the manufacture of multilayer ceramic capacitors (1)

    0 %

    -

    31.12.2018

     (7)ex 3824 90 96

    48

    Zirconium oxide (ZrO2), calcium oxide stabilised (CAS RN 68937-53-1) with a zirconium oxide content by weight of 92 % or more but not more than 97 %

    0 %

    -

    31.12.2020

    ex 3824 90 96

    50

    Nickel hydroxide, doped with 12 % or more but not more than 18 % by weight of zinc hydroxide and cobalt hydroxide, of a kind used to produce positive electrodes for accumulators

    0 %

    -

    31.12.2017

    ex 3824 90 96

    55

    Carrier in powder form, consisting of:

    — ferrite (Iron oxide) (CAS RN 1309-37-1)

    — manganese oxide (CAS RN 1344-43-0)

    — magnesium oxide (CAS RN 1309-48-4)

    — styrene acrylate copolymer

    to be mixed with the toner powder, in the manufacturing of ink/toner filled bottles or cartridges for facsimile machines, computer printers and copiers (1)

    0 %

    -

    31.12.2018

    ex 3824 90 96

    60

    Fused magnesia containing by weight 15 % or more of dichromium trioxide

    0 %

    -

    31.12.2016

    ex 3824 90 96

    63

    Catalyst containing by weight of

    — 52 % (± 10 %) of cuprous oxide (CAS RN 1317-39-1),

    — 38 % (± 10 %) of cupric oxide (CAS RN 1317-38-0), and

    — 10 % (± 5 %) of metallic copper (CAS RN 7440-50-8)

    0 %

    -

    31.12.2018

    ex 3824 90 96

    65

    Aluminium sodium silicate, in the form of spheres of a diameter of:

    — either 1,6 mm or more but not more than 3,4 mm,

    — or 4mm or more but not more than 6 mm

    0 %

    -

    31.12.2018

    ex 3824 90 96

    73

    Reaction product, containing by weight:

    — 1 % or more but not more than 40 % of molybdenum oxide,

    — 10 % or more but not more than 50 % of nickel oxide,

    — 30 % or more but not more than 70 % of tungsten oxide

    0 %

    -

    31.12.2019

    ex 3824 90 96

    75

    Hollow spheres of fused aluminosilicate containing 65-80 % amorphous aluminosilicate, with the following characteristics:

    — a melting point of between 1 600 °C and 1 800 °C,

    — a density of 0,6 – 0,8 g/cm3,

    for use in the manufacture of particle filters in motor vehicles (1)

    0 %

    m3

    31.12.2018

    ex 3824 90 96

    77

    Preparation, consisting of 2,4,7,9-tetramethyldec-5-yne-4,7-diol and silicon dioxide

    0 %

    -

    31.12.2019

    ex 3824 90 96

    79

    Paste containing by weight:

    — 75 % or more, but not more than 85 % of copper,

    — inorganic oxides,

    — ethyl cellulose, and

    — a solvent

    0 %

    -

    31.12.2017

    ex 3824 90 96

    87

    Platinum oxide (CAS RN 12035-82-4) fixed on a porous support of aluminium oxide (CAS RN 1344-28-1), containing by weight:

    — 0,1 % or more but not more than 1 % of platinum, and

    — 0,5 % or more but not more than 5 % of ethylaluminium dichloride (CAS RN 563-43-9)

    0 %

    -

    31.12.2017

    ex 3826 00 10

    ex 3826 00 10

    20

    29

    Mixture of fatty acid methyl esters containing by weight at least:

    — 65 % or more but not more than 75 % of C12 FAME,

    — 21 % or more but not more than 28 % of C14 FAME,

    — 4 % or more but not more than 8 % of C16 FAME,

    for use in the manufacture of detergents and home and personal care products (1)

    0 %

    -

    31.12.2018

    ex 3826 00 10

    ex 3826 00 10

    30

    39

    Mixture of fatty acid methyl esters containing by weight at least:

    — 50 % or more but not more than 58 % of C8-FAME

    — 35 % or more but not more than 50 % of C10-FAME

    for use in the manufacture of agricultural chemistry, (animal and human) food ingredients, additives to lubricant, solvents, lamp oil and firelighter components (1)

    0 %

    -

    31.12.2018

    ex 3826 00 10

    ex 3826 00 10

    40

    49

    Mixture of fatty acid methyl esters containing by weight at least:

    — 15 % or more but not more than 32 % of C16 FAME

    — 65 % or more but not more than 85 % of C18 FAME

    for use in the manufacture of detergents and home and personal cleaning products, agricultural chemistry, (animal and human) food ingredients, additives to lubricant, solvents, lamp oil and firelighter components (1)

    0 %

    -

    31.12.2018

     (7)ex 3901 10 10

    ex 3901 90 90

    20

    50

    High flow linear low density polyethylene-1-butene/LLDPE (CAS RN 25087-34-7) in form of powder, with

    — a melt flow rate (MFR 190 °C/2,16 kg) of 16g/10min or more, but not more than 24 g/10 min and

    — a density (ASTM D 1505) of 0,922 g/cm3 or more, but not more than 0,926 g/cm3, and

    — a vicat softening temperature of min. 94 °C

    0 %

    -

    31.12.2019

     (7)ex 3901 10 10

    30

    Linear low-density polyethylene/LLDPE (CAS RN 9002-88-4) in the form of powder, with

    — 5 % or less by weight of comonomer,

    — a melt flow rate of 15 g/10 min or more, but not more than 60 g/10 min, and

    — a density of 0,924 g/cm3 or more, but not more than 0,928 g/cm3

    0 %

    m3

    31.12.2018

    ex 3901 10 90

    20

    Polyethylene, in the form of granules, of a specific gravity of 0,925 (± 0,0015), a melt flow index of 0,3 g/10 min (± 0,05 g/10 min), for the manufacture of blown films of a haze value not more than 6 % and an elongation at break (MD/TD) of 210/340 (1)

    0 %

    m3

    31.12.2018

    ex 3901 10 90

    30

    Polyethylene granules, containing by weight 10 % or more but not more than 25 % of copper

    0 %

    -

    31.12.2016

    ex 3901 20 90

    10

    Polyethylene, in one of the forms mentioned in note 6 (b) to Chapter 39, of a specific gravity of 0,945 or more but not more than 0,985, for the manufacture of films for typewriter ribbon or similar ribbon (1)

    0 %

    m3

    31.12.2018

    ex 3901 20 90

    20

    Polyethylene, containing by weight 35 % or more but not more than 45 % of mica

    0 %

    -

    31.12.2018

     (7)ex 3901 30 00

    80

    Ethylene-vinyl acetate copolymer,

    — containing 27,8 % or more but not more than 29,3 % by weight of vinyl acetate

    — with a melt flow index of 22 g/10 min or more but no more than 28 g/10 min

    — containing not more than 15 mg/kg vinyl acetate monomer

    0 %

    -

    31.12.2020

     (7)ex 3901 90 90

    55

    Zinc or sodium salt of an ethylene and acrylic acid copolymer, with:

    — an acrylic acid content of 6 % or more but not more than 50 % by weight, and

    — a melt flow rate of 1g/10 min or more at 190 °C/2,16 kg (measured using ASTM D1238)

    0 %

    -

    31.12.2020

     (7)ex 3901 90 90

    60

    Linear low-density polyethylene/LLDPE (CAS RN 9002-88-4) in the form of powder, with

    — more than 5 %, but not more than 8 % by weight of comonomer,

    — a melt flow rate of 15 g/10 min or more, but not more than 60 g/10 min, and

    — a density of 0,924 g/cm3 or more, but not more than 0,928 g/cm3

    0 %

    m3

    31.12.2018

     (7)ex 3901 90 90

    70

    Ethylene maleic anhydride copolymer, whether or not containing another olefin comonomer, with a melt flow rate of 1,3 g/10 min or more at 190 °C/2,16 kg (measured using ASTM D1238)

    0 %

    -

    31.12.2020

     (7)ex 3901 90 90

    80

    Block copolymer of ethylene with octene in the form of pellets:

    — with a specific gravity of 0,862 or more, but not more than 0,865,

    — able to stretch to at least 200 % its original length,

    — with a hysteresis of 50 % (± 10 %),

    — with permanent deformation of not more than 20 %,

    for use in the manufacture of napkin liners for babies (1)

    0 %

    -

    31.12.2020

     (7)ex 3901 90 90

    82

    Copolymer of ethylene and methacrylic acid

    0 %

    -

    31.12.2020

    ex 3901 90 90

    91

    Ionomer resin consisting of a salt of a copolymer of ethylene with methacrylic acid

    4%

    -

    31.12.2018

    ex 3901 90 90

    92

    Chlorosulphonated polyethylene

    0 %

    -

    31.12.2018

    ex 3901 90 90

    93

    Copolymer of ethylene, vinyl acetate and carbon monoxide, for use as a plasticiser in the manufacture of roof sheets (1)

    0 %

    -

    31.12.2018

    ex 3901 90 90

    94

    Mixtures of A-B block copolymer of polystyrene and ethylene-butylene copolymer and A-B-A block copolymer of polystyrene, ethylene-butylene copolymer and polystyrene, containing by weight not more than 35 % of styrene

    0 %

    -

    31.12.2018

    ex 3901 90 90

    97

    Chlorinated polyethylene, in the form of powder

    0 %

    -

    31.12.2018

    ex 3902 10 00

    10

    Polypropylene containing no plasticiser and not more than:

    — 7 mg/kg of aluminium,

    — 2 mg/kg of iron,

    — 1 mg/kg of magnesium,

    — 8 mg/kg of chloride

    0 %

    -

    31.12.2018

    ex 3902 10 00

    20

    Polypropylene, containing no plasticiser,

    — of a melting point of more than 150 °C (as determined by the ASTM D 3417 method),

    — of a heat of fusion of 15 J/g or more but not more than 70 J/g,

    — of an elongation at break of 1 000 % or more (as determined by the ASTM D 638 method),

    — of a tensile modulus of 69 MPa or more but not more than 379 MPa (as determined by the ASTM D 638 method)

    0 %

    -

    31.12.2018

    ex 3902 10 00

    30

    Polypropylene, containing not more than 1 mg/kg of aluminium, 0,05 mg/kg of iron, 1 mg/kg of magnesium and 1 mg/kg of chloride, for use in the manufacture of packaging for disposable contact lenses (1)

    0 %

    -

    31.12.2018

    ex 3902 10 00

    40

    Polypropylene, containing no plasticiser:

    — of a tensile strength: of 32-60 MPa (as determined by the ASTM D638 method);

    — of a flexural strength of 50-90 MPa (as determined by the ASTM D790 method);

    — of a Melt Flow Rate (MFR) at 230 °C/2,16 kg of 5-15 g/10 min (as determined by the ASTM D1238 method);

    — with 40 % or more but not more than 80 % by weight of polypropylene,

    — with 10 % or more but not more than 30 % by weight of glass fibre,

    — with 10 % or more but not more than 30 % by weight of mica

    0 %

    -

    31.12.2019

     (7)ex 3902 10 00

    50

    High isotactic polypropylene (HIPP), whether or not coloured, intended for the manufacture of plastic components for air freshener with the following properties:

    — a density of 0,880 g/cm3 or more but not more than 0,913 g/cm3(as determined by test method ASTM D1505),

    — a tensile strength at yield of 350 kg/cm2 or more but not more than 390 kg/cm2 (as determined by test method ASTM D638)

    — a heat deflection temperature of 135 °C or more under load of 0,45 MPa (as determined by test method ASTM 648) (1)

    0 %

    m3

    31.12.2020

    ex 3902 20 00

    10

    Polyisobutylene, of a number average molecular weight (Mn) of 700 or more but not more than 800

    0 %

    -

    31.12.2018

    ex 3902 20 00

    20

    Hydrogenated polyisobutene, in liquid form

    0 %

    -

    31.12.2018

    ex 3902 30 00

    91

    A-B Block copolymer of polystyrene and an ethylene-propylene copolymer, containing by weight 40 % or less of styrene, in one of the forms mentioned in note 6 (b) to Chapter 39

    0 %

    -

    31.12.2018

    ex 3902 30 00

    95

    A-B-A block copolymer, consisting of:

    — a copolymer of propylene and ethylene, and

    — 21 % (± 3 %) by weight of polystyrene

    0 %

    -

    31.12.2016

    ex 3902 30 00

    97

    Liquid ethylene-propylene-copolymer with:

    — a flashpoint of 250 °C or more,

    — a viscosity index of 150 or more,

    — of a number average molecular weight (Mn) of 650 or more

    0 %

    -

    31.12.2016

    ex 3902 90 90

    52

    Amorphous poly-alpha-olefin copolymer blend of poly(propylene-co-1-butene) and petroleum hydrocarbon resin

    0 %

    -

    31.12.2018

    ex 3902 90 90

    55

    Thermoplastic elastomer, with an A-B-A block copolymer structure of polystyrene, polyisobutylene and polystyrene containing by weight 10 % or more but not more than 35 % of polystyrene

    0 %

    -

    31.12.2018

    ex 3902 90 90

    60

    Non-hydrogenated 100 % aliphatic resin (polymer), with the following characteristics:

    — liquid at room temperature

    — obtained by cationic polymerisation of C-5 alkenes monomers

    — with a number average molecular weight (Mn) of 370 (± 50)

    — with a weight average molecular weight (Mw) of 500 (± 100)

    0 %

    -

    31.12.2019

    ex 3902 90 90

    92

    Polymers of 4-methylpent-1-ene

    0 %

    -

    31.12.2018

    ex 3902 90 90

    94

    Chlorinated polyolefins, whether or not in a solution or dispersion

    0 %

    -

    31.12.2018

    ex 3902 90 90

    98

    Synthetic poly-alpha-olefin with a viscosity at 100 °Celsius (measured according to method ASTM D 445) ranging from 3 centistokes to 9 centistokes and obtained by polymerization of a mixture of dodecene and tetradecene, containing a maximum of 40 % of tetradecene

    0 %

    -

    31.12.2016

    ex 3903 11 00

    10

    White expandable polystyrene beads with a thermal conductivity of not more than 0,034 W/mK at a density of 14,0 kg/m3 (± 1,5 kg/m3), containing 50 % recycled material

    0 %

    m3

    31.12.2018

    ex 3903 19 00

    40

    Crystalline polystyrene with:

    — a melting point of 268 °C or more but not more than 272 °C

    — a setting point of 232 °C or more but not more than 247 °C,

    — whether or not containing additives and filling material

    0 %

    -

    31.12.2016

    ex 3903 90 90

    10

    Butadiene-styrene copolymer pellets or granules, with:

    — a specific gravity of 1,05 (± 0,02),

    — a melt flow index at 200 °C/5 kg of 13 g/10 min (± 1 g/10 min)

    0 %

    m3

    31.12.2016

    ex 3903 90 90

    15

    Copolymer in the form of granules containing by weight:

    — 78 ± 4 % styrene,

    — 9 ± 2 % n-butyl acrylate,

    — 11 ± 3 % n-butyl methacrylate,

    — 1,5 ± 0,7 % methacrylic acid, and

    — 0,01 % or more but not more than 2,5 % of polyolefinic wax

    0 %

    -

    31.12.2016

    ex 3903 90 90

    20

    Copolymer in the form of granules containing by weight:

    — 83 ± 3 % styrene,

    — 7 ± 2 % n-butyl acrylate,

    — 9 ± 2 % n-butyl methacrylate, and

    — 0,01 % or more but not more than 1 % of polyolefinic wax

    0 %

    -

    31.12.2016

    ex 3903 90 90

    25

    Copolymer in the form of granules containing by weight:

    — 82 ± 6 % styrene,

    — 13,5 ± 3 % n-butyl acrylate,

    — 1 ± 0,5 % methacrylic acid, and

    — 0,01 % or more but not more than 8,5 % of polyolefinic wax

    0 %

    -

    31.12.2016

    ex 3903 90 90

    30

    Butadiene-styrene copolymer pellets or granules with a melting point of 85 °C (± 5 °C), containing by weight:

    — 2 % or more but not more than 4 % of tris(tribromophenyl) triazine,

    — 5 % or more but not more than 10 % of ethane-1,2-bis(pentabromophenyl),

    — 3 % or more but not more than 5 % of antimony trioxide

    0 %

    -

    31.12.2016

    ex 3903 90 90

    ex 3911 90 99

    35

    43

    Copolymer of α-methylstyrene and styrene, having a softening point of more than 113 °C

    0 %

    -

    31.12.2018

    ex 3903 90 90

    ex 3911 90 99

    40

    50

    Copolymer of styrene with α-methylstyrene and acrylic acid, of a number average molecular weight (Mn) of 500 or more but not more than 6 000

    0 %

    -

    31.12.2018

    ex 3903 90 90

    45

    Preparation, in form of powder, containing by weight:

    — 86 % or more but not more than 90 % of styrene-acrylic-copolymer, and

    — 9 % or more but not more than 11 % of fatty acid ethoxylate (CAS RN 9004-81-3)

    0 %

    m3

    31.12.2019

    ex 3903 90 90

    55

    Preparation, in form of an aqueous suspension, containing by weight:

    — 25 % or more but not more than 26 % of styrene-acrylic-copolymer, and

    — 5 % or more but not more than 6 % of glycol

    0 %

    -

    31.12.2019

    ex 3903 90 90

    ex 3911 90 99

    60

    60

    Copolymer of styrene with maleic anhydride, either partially esterified or completely chemically modified, of an average molecular weight (Mn) of not more than 4 500 , in flake or powder form

    0 %

    -

    31.12.2016

     (7)ex 3903 90 90

    65

    Copolymer of Styrene with 2, 5-Furandione and (1-methylethyl)benzene in the form of flakes or powder (CAS RN 26762-29-8)

    0 %

    -

    31.12.2020

    ex 3903 90 90

    80

    Granules of copolymer of styrene and divinylbenzene of a minimum diameter of 150 μm and a maximum diameter of 800 μm and containing by weight:

    — minimum 65 % styrene,

    — maximum 25 % divinylbenzene

    for use in the manufacture of ion exchange resins (1)

    0 %

    -

    31.12.2018

    ex 3903 90 90

    86

    Mixture containing by weight:

    — 45 % or more but not more than 65 % of polymers of styrene

    — 35 % or more but not more than 45 % of poly(phenylene ether)

    — not more than 10 % of other additives

    and with one or more of the following special colour effects:

    — metallic or pearlescent with a visual angular metamerism caused by at least 0,3 % flake-based pigment

    — fluorescent, as characterized by emitting light during absorption of ultraviolet radiation

    — bright white, as characterized by L* not less than 92 and b* not more than 2 and a* between -5 and 7 on the CIELab colour scale

    0 %

    -

    31.12.2018

    ex 3904 10 00

    20

    Poly(vinyl chloride) powder, not mixed with any other substances or containing any vinyl acetate monomers, with:

    — a degree of polymerisation of 1 000 (± 300) monomer units,

    — a coefficient of heat transmission (K-value) of 60 or more, but not more than 70,

    — a volatile material content of less than 2,00 % by weight,

    — a sieve non-passing fraction at a mesh width of 120 μm of not more than 1 % by weight,

    for use in the manufacture of battery separators (1)

    0 %

    -

    31.12.2019

    ex 3904 30 00

    ex 3904 40 00

    30

    91

    Copolymer of vinyl chloride with vinyl acetate and vinyl alcohol, containing by weight:

    — 87 % or more but not more than 92 % of vinyl chloride,

    — 2 % or more but not more than 9 % of vinyl acetate, and

    — 1 % or more but not more than 8 % of vinyl alcohol,

    — in one of the forms mentioned in note 6 (a) or (b) to Chapter 39, for the manufacture of goods of headings 3215 or 8523 or for use in the manufacture of coatings for containers and closures of a kind used for preserving food and drink (1)

    0 %

    -

    31.12.2018

    ex 3904 40 00

    93

    Copolymer of vinyl chloride and methyl acrylate, containing by weight 80 % (± 1 %) of vinyl chloride and 20 % (± 1 %) of methyl acrylate, in the form of a aqueous emulsion

    0 %

    -

    31.12.2018

    ex 3904 50 90

    92

    Vinylidene-chloride methacrylate co-polymer for use in the manufacture of monofilaments (1)

    0 %

    -

    31.12.2019

    ex 3904 61 00

    20

    Copolymer of tetrafluoroethylene and trifluoro(heptafluoropropoxy)ethylene, containing 3,2 % or more but not more than 4,6 % by weight of trifluoro(heptafluoropropoxy)ethylene and less than 1 mg/kg of extractable fluoride ions

    0 %

    -

    31.12.2018

    ex 3904 61 00

    30

    Polytetrafluoroethylene, in the form of powder, of a specific surface of 8 m2/g or more but not more than 12 m2/g, a particle size distribution of 10 % of less than 10 μm and 90 % of less than 35 μm and an average particle size of 20 μm

    0 %

    -

    31.12.2018

     (7)ex 3904 69 80

    81

    Poly(vinylidene fluoride) (CAS RN 24937-79-9)

    0 %

    -

    31.12.2020

    ex 3904 69 80

    85

    Copolymer of ethylene with chlorotrifluoroethylene, whether or not modified with hexafluoroisobutylene, in powder, whether or not with fillers

    0 %

    -

    31.12.2017

    ex 3904 69 80

    93

    Copolymer of ethylene with chlorotrifluoroethylene, in one of the forms mentioned in note 6 (b) to Chapter 39

    0 %

    -

    31.12.2018

    ex 3904 69 80

    94

    Copolymer of ethylene and tetrafluoroethylene

    0 %

    -

    31.12.2018

    ex 3904 69 80

    96

    Polychlorotrifluoroethylene, in one of the forms mentioned in note 6 (a) and (b) to Chapter 39

    0 %

    -

    31.12.2018

    ex 3904 69 80

    97

    Copolymer of chlorotrifluoroethylene and vinylidene difluoride

    0 %

    -

    31.12.2018

    ex 3905 30 00

    10

    Viscous preparation, essentially consisting of poly(vinyl alcohol) (CAS RN 9002-89-5), an organic solvent and water for use as protective coating of wafers during the manufacturing of semiconductors (1)

    0 %

    -

    31.12.2017

     (7)ex 3905 91 00

    30

    Water soluble copolymer of ethylene and vinyl alcohol (CAS RN 26221-27-2), containing not more than 32 % by weight of ethylene

    0 %

    -

    31.12.2017

    ex 3905 99 90

    92

    Polymer of vinylpyrrolidone and dimethylaminoethyl methacrylate, containing by weight 97 % or more but not more than 99 % of vinylpyrrolidone, in the form of a solution in water

    0 %

    -

    31.12.2018

    ex 3905 99 90

    95

    Hexadecylated or eicosylated polyvinylpyrrolidone

    0 %

    -

    31.12.2018

    ex 3905 99 90

    96

    Polymer of vinyl formal, in one of the forms mentioned in note 6 (b) to Chapter 39, of a weight average molecular weight (Mw) of 25 000 or more but not more than 150 000 and containing by weight:

    — 9,5 % or more but not more than 13 % of acetyl groups evaluated as vinyl acetate, and

    — 5 % or more but not more than 6,5 % of hydroxy groups evaluated as vinyl alcohol

    0 %

    -

    31.12.2018

    ex 3905 99 90

    97

    Povidone (INN)-iodine (CAS RN 25655-41-8)

    0 %

    -

    31.12.2018

    ex 3905 99 90

    98

    Poly(vinyl pyrrolidone) partially substituted by triacontyl groups, containing by weight 78 % or more but not more than 82 % of triacontyl groups

    0 %

    -

    31.12.2018

    3906 90 60

     

    Copolymer of methyl acrylate with ethylene and a monomer containing a non-terminal carboxy group as a substituent, containing by weight 50 % or more of methyl acrylate, whether or not mixed with silicon dioxide

    0 %

    -

    31.12.2018

    ex 3906 90 90

    10

    Polymerization product of acrylic acid with small quantities of a polyunsaturated monomer, for the manufacture of medicaments of heading 3003 or 3004  (1)

    0 %

    -

    31.12.2018

    ex 3906 90 90

    15

    Photosensitive resin consisting of modified acrylate, acrylic monomer, catalyst (photoinitiator) and stabilizer

    0 %

    -

    31.12.2018

    ex 3906 90 90

    27

    Copolymer of stearyl methacrylate, isooctyl acrylate and acrylic acid, dissolved in isopropyl palmitate

    0 %

    -

    31.12.2017

    ex 3906 90 90

    30

    Copolymer of styrene with hydroxyethyl methacrylate and 2-ethylhexyl acrylate, of a number average molecular weight (Mn) of 500 or more but not more than 6 000

    0 %

    -

    31.12.2018

     (7)ex 3906 90 90

    33

    Core shell copolymer of butyl acrylate and alkyl methacrylate, with a particle size of 5 μm or more but not more than 10 μm

    0 %

    -

    31.12.2020

    ex 3906 90 90

    35

    White powder of 1,2-ethanediol dimethacrylate-methyl methacrylate copolymer of a particle size of not more than 18 μm, insoluble in water

    0 %

    -

    31.12.2018

     (7)ex 3906 90 90

    37

    Copolymer of trimethylolpropane trimethacrylate and methyl methacrylate (CAS RN 28931-67-1), in microsphere form with an average diameter of 3 μm

    0 %

    -

    31.12.2020

     (7)ex 3906 90 90

    40

    Transparent acrylic polymer in packages of not more than 1 kg, and not for retail sale with:

    — a viscosity of not more than 50 000 Pa·s at 120 °C as determined by the test method ASTM D 3835

    — a weight average molecular weight (Mw) of more than 500 000 but not more than 1 200 000 according to the Gel Permeation Chromatography (GPC) test,

    — a residual monomer content of less than 1 %

    0 %

    -

    31.12.2020

    ex 3906 90 90

    41

    Poly(alkyl acrylate) with an ester alkyl chain of C10 to C30

    0 %

    -

    31.12.2019

    ex 3906 90 90

    45

    Acrylonitrile-butadiene-styrene-methylmethacrylate copolymer pellets with:

    — a melting point of 96 °C (± 3 °C),

    — a specific gravity of 1,03 or more but not more than 1,07, and

    containing by weight:

    — 25 % or more but not more than 50 % of acrylonitrile-butadiene-styrene, and

    — 50 % or more but not more than 75 % of methylmethacrylate

    0 %

    -

    31.12.2016

    ex 3906 90 90

    50

    Polymers of esters of acrylic acid with one or more of the following monomers in the chain:

    — chloromethyl vinyl ether,

    — chloroethyl vinyl ether,

    — chloromethylstyrene,

    — vinyl chloroacetate,

    — methacrylic acid,

    — butenedioic acid monobutyl ester,

    containing by weight not more than 5 % of each of the monomeric units, in one of the forms mentioned in note 6 (b) to Chapter 39

    0 %

    -

    31.12.2018

    ex 3906 90 90

    65

    Polyalkylacrylate, chemically modified with cobalt, with a melting temperature (Tm) of 65 °C (± 5 °C), measured with Differential Scanning Calorimetry (DSC)

    0 %

    -

    31.12.2018

    ex 3906 90 90

    73

    Preparation containing by weight:

    — 33 % or more but not more than 37 % of butyl methacrylate — methacrylic acid copolymer,

    — 24 % or more but not more than 28 % of propylene glycol, and

    — 37 % or more but not more than 41 % of water

    0 %

    -

    31.12.2019

    ex 3906 90 90

    80

    Polydimethylsiloxane-graft-(polyacrylates; polymethacrylates)

    0 %

    -

    31.12.2018

    ex 3907 20 11

    10

    Poly(ethylene oxide) of a number average molecular weight (Mn) of 100 000 or more

    0 %

    -

    31.12.2018

    ex 3907 20 11

    20

    Bis[Methoxypoly[ethyleneglycol)]-maleimidopropionamide, chemically modified with lysine, of a number average molecular weight (Mn) of 40 000

    0 %

    -

    31.12.2018

    ex 3907 20 11

    50

    [3-[3-(2H-Benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]-hydroxypoly(oxo-1,2-ethanediyl) (CAS RN 104810-48-2)

    0 %

    -

    31.12.2016

    ex 3907 20 11

    60

    Preparation containing:

    — α-[3-[3-(2H-Benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]-ω-hydroxypoly(oxy-1,2-ethanediyl) (CAS RN 104810-48-2) and

    — α-[3-[3-(2H-Benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]-ω-[3-[3-(2H-benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropoxy]poly(oxy-1,2-ethanediyl) (CAS RN 104810-47-1)

    0 %

    -

    31.12.2016

    ex 3907 20 20

    20

    Polytetramethylene ether glycol with a weight average molecular weight (Mw) of 2 700 or more but not more than 3 100 (CAS RN 25190-06-1)

    0 %

    -

    31.12.2017

    ex 3907 20 20

    30

    Mixture, containing by weight 70 % or more but not more than 80 % of a polymer of glycerol and 1,2-epoxypropane and 20 % or more but not more than 30 % of a copolymer of dibutyl maleate and N-vinyl-2-pyrrolidone

    0 %

    -

    31.12.2018

    ex 3907 20 20

    40

    Copolymer of tetrahydrofuran and tetrahydro-3-methylfuran with a number average molecular weight (Mn) of 3 500 (± 100)

    0 %

    -

    31.12.2018

    ex 3907 20 20

    ex 3907 20 99

    50

    75

    Poly(p-phenylene oxide) in the form of powder

    — with a glasstransitiontemperature of 210 °C,

    — with a weight average molecular weight (Mw) of 35 000 or more but not more than 80 000 ,

    — with an inherent viscosity of 0,2 or more but not more than 0,6 dl/gram

    0 %

    -

    31.12.2019

    ex 3907 20 99

    15

    Poly(oxypropylene) having alkoxysilyl end-groups

    0 %

    -

    31.12.2018

    ex 3907 20 99

    30

    Homopolymer of 1-chloro-2,3-epoxypropane (epichlorohydrin)

    0 %

    -

    31.12.2018

    ex 3907 20 99

    35

    Polyethylene glycol chemically modified with an isocyanate group containing a carbodiimide group, in the form of a solution in 2-methoxy-1-methylethyl acetate

    0 %

    -

    31.12.2018

    ex 3907 20 99

    45

    Copolymer of ethylene oxide and propylene oxide, having aminopropyl and methoxy end-groups

    0 %

    -

    31.12.2018

    ex 3907 20 99

    50

    Vinyl-silyl terminated perfluoropolyether polymer or an assortment of two components consisting of the same type of vinyl-silyl terminated perfluoropolyether polymer as the main ingredient

    0 %

    -

    31.12.2018

    ex 3907 20 99

    55

    Succinimidyl ester of methoxy poly(ethylene glycol)propionic acid, of a number average molecular weight (Mn) of 5 000

    0 %

    -

    31.12.2018

    ex 3907 20 99

    60

    Polytetramethylene oxide di-p-aminobenzoate

    0 %

    -

    31.12.2016

    ex 3907 20 99

    65

    L-Lysine N-hydroxysuccinimidyl ester.alpha.,.epsilon.-bis(polyethylene glycol monomethylether carbamate) (CAS RN 266318-38-1) of a number average molecular weight (Mn) of 38 000 or more but not more than 40 000

    0 %

    -

    31.12.2018

    ex 3907 20 99

    70

    α-[3-(3-Maleimido-1-oxopropyl)amino]propyl-ω-methoxy, polyoxyethylene (CAS RN 883993-35-9)

    0 %

    -

    31.12.2019

    ex 3907 30 00

    ex 3926 90 97

    40

    70

    Epoxide resin, containing by weight 70 % or more of silicon dioxide, for the encapsulation of goods of headings 8533 , 8535 , 8536 , 8541 , 8542 or 8548  (1)

    0 %

    -

    31.12.2018

    ex 3907 30 00

    50

    Liquid epoxide resin of 2-propenenitrile/1,3-butadiene-epoxide copolymer, not containing any solvent, with:

    — a zinc borate hydrate content of not more than 40 % by weight,

    — a diantimony trioxide content of not more than 5 % by weight

    0 %

    -

    31.12.2018

    ex 3907 30 00

    60

    Polyglycerol polyglycidyl ether resin (CAS RN 118549-88-5)

    0 %

    -

    31.12.2017

    ex 3907 40 00

    70

    Polycarbonate of phosgene and bisphenol A:

    — containing by weight 12 % or more but not more than 26 % of a copolymer of isophthaloyl chloride, terephthaloyl chloride and resorcinol,

    — with p-cumylphenol endcaps, and

    — with a weight average molecular weight (Mw) of 29 900 or more but not more than 31 900

    0 %

    -

    31.12.2019

    ex 3907 40 00

    80

    Polycarbonate of carbonic dichloride, 4,4′-(1-methylethylidene)bis[2,6-dibromophenol] and 4,4′-(1-methylethylidene)bis[phenol] with 4-(1-methyl-1-phenylethyl)phenol endcaps

    0 %

    -

    31.12.2019

    ex 3907 60 80

    10

    Copolymer of terephthalic acid and isophthalic acid with ethylene glycol, butane-1,4-diol and hexane-1,6-diol

    0 %

    -

    31.12.2018

    ex 3907 60 80

    40

    Poly(ethylene terephthalate) pellets or granules:

    — with a specific gravity of 1,23 or more but not more than 1,27 at 23 °C, and

    — containing not more than 10 % by weight of other modifiers or additives

    0 %

    m3

    31.12.2016

    ex 3907 60 80

    50

    Flexible packages (for oxygen sensitive polymers) manufactured from a laminate of:

    — not more than 75 μm of polyethylene,

    — not more than 50 μm of polyamide,

    — not more than 15 μm of polyethylene terephthalate, and

    — not more than 9 μm of aluminium

    with a tensile strength of more than 70 N/15 mm and oxygen transmission rate of less than 0,1 cm3/m2/24 hrs at 0,1 MPa

    0 %

    -

    31.12.2017

    ex 3907 60 80

    60

    Oxygen binding copolymer (as determined by the ASTM D 1434 and 3985 methods), obtained from benzenedicarboxylic acids, ethylene glycol and polybutadiene substituted by hydroxy groups

    0 %

    -

    31.12.2018

    3907 70 00

     

    Poly(lactic acid)

    0 %

    -

    31.12.2018

    ex 3907 91 90

    10

    Diallyl phthalate prepolymer, in powder form

    0 %

    -

    31.12.2019

    ex 3907 99 90

    10

    Poly(oxy-1,4-phenylenecarbonyl) (CAS RN 26099-71-8), in the form of powder

    0 %

    -

    31.12.2018

    ex 3907 99 90

    20

    Liquid crystal copolyester with a melting point of not less than 270 °C, whether or not containing fillers

    0 %

    -

    31.12.2018

    ex 3907 99 90

    25

    Copolymer, containing 72 % by weight or more of terephthalic acid and/or isomers thereof and cyclohexanedimethanol

    0 %

    -

    31.12.2017

     (7)ex 3907 99 90

    ex 3913 90 00

    30

    20

    Poly(hydroxyalkanoate), predominantly consisting of poly(3-hydroxybutyrate)

    0 %

    -

    31.12.2020

    ex 3907 99 90

    40

    Polycarbonate of phosgene, bisphenol A, resorcinol, isophthaloyl chloride, terephthaloyl chloride andpolysiloxane, with p-cumylphenolendcaps, and a weight average molecular weight (Mw) of 24 100 or more but not more than 25 900

    0 %

    -

    31.12.2019

    ex 3907 99 90

    60

    Copolymer of terephthalic acid and isophthalic acid with bisphenol A

    0 %

    -

    31.12.2017

    ex 3907 99 90

    70

    Copolymer of poly(ethylene terephthalate) and cyclohexane dimethanol, containing more than 10 % by weight of cyclohexane dimethanol

    0 %

    -

    31.12.2019

     (7)ex 3907 99 90

    80

    Copolymer, consisting of 72 % by weight or more of terephthalic acid and/or derivatives thereof and cyclohexanedimethanol, completed with linear and/or cyclic dioles

    0 %

    -

    31.12.2020

    ex 3908 90 00

    10

    Poly(iminomethylene-1,3-phenylenemethyleneiminoadipoyl), in one of the forms mentioned in note 6 (b) to Chapter 39

    0 %

    -

    31.12.2018

    ex 3908 90 00

    30

    Reaction product of mixtures of octadecanecarboxylic acids polymerised with an aliphatic polyetherdiamine

    0 %

    -

    31.12.2018

     (7)ex 3908 90 00

    45

    1,4-Benzenedicarboxylic acid polymer with 2-methyl-1,8-octanediamine and 1,9-nonanediamine in powder form (CAS RN 169284-22-4)

    0 %

    -

    31.12.2020

    ex 3908 90 00

    60

    Copolymer consisting of:

    — hexanedioic acid

    — 12-aminododecanoic acid

    — hexahydro-2H-azepin-2-one, and

    — 1,6-hexanediamine

    0 %

    -

    31.12.2017

    ex 3908 90 00

    70

    Copolymer containing:

    — 1,3-benzenedimethanamine (CAS RN 1477-55-0), and

    — adipic acid (CAS RN 124-04-9)

    whether or not containing isophthalic acid (CAS RN 121-91-5)

    0 %

    -

    31.12.2019

    ex 3909 40 00

    10

    Polycondensation product of phenol with formaldehyde, in the form of hollow spheres of a diameter of less than 150 μm

    0 %

    -

    31.12.2018

     (7)ex 3909 40 00

    20

    Powder of thermosetting resin in which magnetic particles have been evenly distributed, for use in the manufacture of ink for photocopiers, fax machines, printers and multifunction devices (1)

    0 %

    -

    31.12.2020

    ex 3909 40 00

    30

    Mixture of:

    — alkylphenol — formaldehyde resin, whether or not brominated, and

    — zinc oxide

    0 %

    -

    31.12.2017

    ex 3909 40 00

    40

    Polymer in powder form with a content of:

    — phenolic resin polymer (CAS RN 9003-35-4) with 80 % by weight or more but not more than 90 %

    — phenol (CAS RN 108-95-2) with not more than 5 %, and

    — hexamethylenetetramine (CAS RN 100-97-0) with 5 % by weight or more but not more than 15 %

    0 %

    -

    31.12.2018

    ex 3909 50 90

    10

    UV curable water soluble liquid photopolymer consisting of a mixture by weight of

    — 60 % or more of two-functional acrylated polyurethane oligomers, and

    — 30 % (± 8 %) of mono-functional and tri-functional (metha) acrylates, and

    — 10 % (± 3 %) of hydroxyl functionalized mono-functional (metha) acrylates

    0 %

    -

    31.12.2019

    ex 3909 50 90

    20

    Preparation containing by weight:

    — 14 % or more but not more than 18 % of ethoxylated polyurethane modified with hydrophobic groups,

    — 3 % or more but not more than 5 % of enzymatically modified starch, and

    — 77 % or more but not more than 83 % of water

    0 %

    -

    31.12.2019

    ex 3909 50 90

    30

    Preparation containing by weight:

    — 16 % or more but not more than 20 % of ethoxylated polyurethane modified with hydrophobic groups,

    — 19 % or more but not more than 23 % of diethylene glycol butyl ether, and

    — 60 % or more but not more than 64 % of water

    0 %

    -

    31.12.2019

    ex 3909 50 90

    40

    Preparation containing by weight:

    — 34 % or more but not more than 36 % of ethoxylated polyurethane modified with hydrophobic groups,

    — 37 % or more but not more than 39 % of propylene glycol, and

    — 26 % or more but not more than 28 % of water

    0 %

    -

    31.12.2019

    ex 3910 00 00

    20

    Block copolymer of poly(methyl-3,3,3-trifluoropropylsiloxane) and poly[methyl(vinyl)siloxane]

    0 %

    -

    31.12.2018

    ex 3910 00 00

    40

    Silicones of a kind used in the manufacture of long term surgical implants

    0 %

    -

    31.12.2016

    ex 3910 00 00

    50

    Silicone based pressure sensitive adhesive in solvent containing copoly(dimethylsiloxane/diphenylsiloxane) gum

    0 %

    -

    31.12.2017

    ex 3910 00 00

    60

    Polydimethylsiloxane, whether or not polyethylene glycol and trifluoropropyl substituted, with methacrylate end groups

    0 %

    -

    31.12.2019

    ex 3910 00 00

    70

    Passivating silicon coating in primary form, to protect edges and prevent short circuits in semiconductor devices

    0 %

    -

    31.12.2018

    ex 3910 00 00

    80

    Monomethacryloxypropylterminated poly(dimethylsiloxane)

    0 %

    -

    31.12.2019

    ex 3911 10 00

    81

    Non-hydrogenated hydrocarbon resin, obtained by polymerization of more than 75 % by weight C-5 to C-12 cycloaliphatic alkenes and more than 10 % but not more than 25 % by weight aromatic alkenes yielding a hydrocarbon resin with:

    — an iodine value of more than 120, and

    — a Gardner Colour of more than 10 for the pure product, or

    — a Gardner Colour of more than 8 for a 50 % solution by weight in toluene (as determined by the ASTM method D6166)

    0 %

    -

    31.12.2018

    ex 3911 90 19

    10

    Poly(oxy-1,4-phenylenesulfonyl-1,4-phenyleneoxy-4,4′-biphenylene)

    0 %

    -

    31.12.2018

    ex 3911 90 19

    30

    Copolymer of ethyleneimine and ethyleneimine dithiocarbamate, in an aqueous solution of sodium hydroxide

    0 %

    -

    31.12.2017

    ex 3911 90 19

    40

    m- Xylene formaldehyde resin

    0 %

    -

    31.12.2016

    ex 3911 90 19

    50

    Polycarboxylate sodium salt of 2,5-furandione and 2,4,4-trimethylpentene in powder form

    0 %

    -

    31.12.2019

    ex 3911 90 19

    60

    Formaldehyde, polymer with 1,3-dimethylbenzene and tert-butyl-phenol (CAS RN 60806-48-6)

    0 %

    -

    31.12.2019

    ex 3911 90 19

    70

    Preparation, containing:

    — Cyanic acid, C,C′-((1-methylethylidene)di-4,1-phenylene) ester, homopolymer (CAS RN 25722-66-1),

    — 1,3-Bis(4-cyanophenyl)propane (CAS RN 1156-51-0),

    — in a solution of butanone (CAS RN 78-93-3) with a content of less than 50 % by weight

    0 %

    -

    31.12.2019

    ex 3911 90 99

    25

    Copolymer of vinyltoluene and α-methylstyrene

    0 %

    -

    31.12.2018

     (7)ex 3911 90 99

    30

    1,4:5,8- Dimethanonaphthalene, 2-ethylidene-1,2,3,4,4a,5,8,8a-octahydro-, polymer with 3a,4,7,7a- tetrahydro- 4,7-methano-1H-indene, hydrogenated

    0 %

    -

    31.12.2020

     (7)ex 3911 90 99

    35

    Alternated copolymer of ethylene and maleic anhydride (EMA)

    0 %

    -

    31.12.2020

    ex 3911 90 99

    40

    Mixed calcium and sodium salt of a copolymer of maleic acid and methyl vinyl ether, having a calcium content of 9 % or more but not more than 16 % by weight

    0 %

    -

    31.12.2018

    ex 3911 90 99

    45

    Copolymer of maleic acid and methyl vinyl ether

    0 %

    -

    31.12.2018

    ex 3911 90 99

    53

    Hydrogenated polymer of 1,2,3,4,4a,5,8,8a-octahydro-1,4:5,8-dimethanonaphthalene with 3a,4,7,7a-tetrahydro-4,7-methano-1H-indene and 4,4a,9,9a-tetrahydro-1,4-methano-1H-fluorene (CAS RN 503442-46-4)

    0 %

    -

    31.12.2017

    ex 3911 90 99

    57

    Hydrogenated polymer of 1,2,3,4,4a,5,8,8a-octahydro-1,4:5,8-dimethanonaphthalene with 4,4a,9,9a-tetrahydro-1,4-methano-1H-fluorene (CAS RN 503298-02-0)

    0 %

    -

    31.12.2017

    ex 3911 90 99

    65

    Calcium zinc salt of a copolymer of maleic acid and methyl vinyl ether

    0 %

    -

    31.12.2018

    ex 3911 90 99

    86

    Copolymer of methyl vinyl ether and maleic acid anhydride (CAS RN 9011-16-9)

    0 %

    -

    31.12.2016

    ex 3912 11 00

    30

    Cellulose triacetate (CAS RN 9012-09-3)

    0 %

    -

    31.12.2016

     (7)ex 3912 11 00

    40

    Cellulose diacetate powder

    0 %

    -

    31.12.2020

    ex 3912 39 85

    10

    Ethylcellulose, not plasticized

    0 %

    -

    31.12.2018

    ex 3912 39 85

    20

    Ethylcellulose, in the form of an aqueous dispersion containing hexadecan-1-ol and sodium dodecyl sulphate, containing by weight 27 (± 3) % of ethylcellulose

    0 %

    -

    31.12.2018

    ex 3912 39 85

    30

    Cellulose, both hydroxyethylated and alkylated with alkyl chain-lengths of 3 or more carbon atoms

    0 %

    -

    31.12.2018

    ex 3912 39 85

    40

    Hypromellose (INN) (CAS RN 9004-65-3)

    0 %

    -

    31.12.2016

     (7)ex 3912 39 85

    50

    Polyquaternium 10 (CAS RN 68610-92-4)

    0 %

    -

    31.12.2020

    ex 3912 90 10

    10

    Cellulose acetate propionate, non-plasticised, in the form of powder:

    — containing by weight 25 % or more of propionyl (as determined by the ASTM D 817-72 method), and

    — of a viscosity of not more than 120 poise (as determined by the ASTM D 817-72 method),

    for the manufacture of printing inks, paints, lacquers and other coatings, and reprographic coatings (1)

    0 %

    -

    31.12.2018

    ex 3912 90 10

    20

    Hydroxypropyl methylcellulose phthalate

    0 %

    -

    31.12.2018

    ex 3913 90 00

    85

    Sterile sodium hyaluronate (CAS RN 9067-32-7)

    0 %

    -

    31.12.2018

    ex 3913 90 00

    92

    Protein, chemically modified by carboxylation and/or phthalic acid addition, having a weight average molecular weight (Mw) of 100 000 to 300 000

    0 %

    -

    31.12.2018

    ex 3913 90 00

    94

    Granules containing by weight:

    — 35 % or more but less than 75 % of a high amylose extruded biopolymer produced from corn starch,

    — 5 % or more but less than 16 % polyvinyl alcohol,

    — 10 % or more but less than 46 % of polyol plasticisers,

    — 0,25 % or more but less than 3 % of stearic acid,

    — whether or not containing 30 % (± 10 %) of biodegradable polyester resin but never to a level that exceeds the amount of the high amylose biopolymer

    0 %

    -

    31.12.2016

    ex 3913 90 00

    95

    Chondroitinsulphuric acid, sodium salt (CAS RN 9082-07-9)

    0 %

    -

    31.12.2018

    ex 3913 90 00

    96

    Powder consisting of 90 % (± 5 %) by weight of a high amylose extruded biopolymer produced from corn starch, 10 % (± 5 %) by weight of a synthetic polymer and 0,5 % (± 0,25 %) of stearic acid

    0 %

    -

    31.12.2016

    ex 3916 20 00

    91

    Profiles of poly(vinyl chloride) of a kind used in the manufacture of sheet pilings and facings, containing the following additives:

    — titanium dioxide

    — poly(methyl methacrylate)

    — calcium carbonate

    — binding agents

    0 %

    -

    31.12.2019

    ex 3916 90 10

    10

    Rods with cellular structure, containing by weight:

    — polyamide-6 or poly(epoxy anhydride)

    — 7 % or more but not more than 9 % of polytetrafluorethylene if present

    — 10 % or more but not more than 25 % of inorganic fillers

    0 %

    -

    31.12.2018

    ex 3917 32 00

    91

    Pipe consisting of a block copolymer of polytetrafluoroethylene and polyperfluoroalkoxytrifluoroethylene, of a length of not more than 600 mm, a diameter of not more than 85 mm and a wall-thickness of 30 μm or more but not more than 110 μm

    0 %

    -

    31.12.2018

    ex 3917 40 00

    91

    Plastic connectors containing O-rings, a retainer clip and a release system for insertion into car fuel hoses

    0 %

    -

    31.12.2019

    ex 3919 10 19

    ex 3919 10 80

    ex 3919 90 00

    10

    25

    31

    Reflecting film, consisting of a layer of polyurethane, with, on one side, security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use, and embedded glass beads and, on the other side, an adhesive layer, covered on one side or on both sides with a release film

    0 %

    -

    31.12.2018

    ex 3919 10 19

    20

    Rolls of two-sided adhesive tape:

    — coated with non-vulcanised natural or synthetic rubber

    — with a width of 20 mm or more but not more than 40 mm

    — containing silicone, aluminium hydroxide, acryl and urethane

    0 %

    -

    31.12.2018

    ex 3919 10 80

    ex 3919 90 00

    27

    20

    Polyester film:

    — coated on one side with an acrylic thermal release adhesive that debonds at temperatures of 90 °C or more but not more than 200 °C, and a polyester liner, and

    — on the other side not coated or coated with an acrylic pressure sensitive adhesive or with an acrylic thermal release adhesive that debonds at temperatures of 90 °C or more but not more than 200 °C, and a polyester liner

    0 %

    -

    31.12.2019

    ex 3919 10 80

    30

    Double-sided, self-adhesive modified epoxy resin foil, put up in rolls, 10 to 20 cm wide, 10 to 210 m long and with a total thickness of 10 to 50 μm, not for retail sale

    0 %

    -

    31.12.2016

    ex 3919 10 80

    35

    Reflecting film, consisting of a layer of poly(vinyl chloride), a layer of alkyd polyester, with, on one side, security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use, only visible by means of a retroreflecting lighting, and embedded glass beads and, on the other side, an adhesive layer, covered on one side or on both sides with a release film

    0 %

    -

    31.12.2018

     (7)ex 3919 10 80

    37

    Polytetrafluoroethylene film:

    — with a thickness of 100 μm or more,

    — an elongation at break of not more than 100 %,

    — coated on one side with a pressure sensitive silicon adhesive

    0 %

    -

    31.12.2020

    ex 3919 10 80

    ex 3919 90 00

    40

    43

    Black poly(vinyl chloride) film:

    — with a gloss of more than 30 degrees according to ASTM D2457,

    — whether or not covered on one side with a protective poly(ethyleneterephthalate) film, and on the other side with a pressure sensitive adhesive with channels and a release liner

    0 %

    -

    31.12.2016

     (7)ex 3919 10 80

    ex 3919 90 00

    43

    26

    Ethylene vinyl acetate film:

    — of a thickness of 100 μm or more,

    — coated on one side with an acrylic pressure sensitive or UV-sensitive adhesive and a polyester or polypropylene liner

    0

    -

    31.12.2020

    ex 3919 10 80

    ex 3919 90 00

    45

    45

    Reinforced polyethylene foam tape, coated on both sides with an acrylic micro channelled pressure sensitive adhesive and on one side a liner, with an application thickness of 0,38 mm or more but not more than 1,53 mm

    0 %

    -

    31.12.2017

    ex 3919 10 80

    ex 3919 90 00

    47

    32

    Polyester, polyurethane or polycarbonate foil:

    — with pressure sensitive silicone polymer adhesive,

    — of a total thickness of not more than 0,7 mm,

    — of a total width of 1 cm or more, but not more than 1 m,

    — whether or not in rolls

    of a kind used for the protection of the surface of products of headings 8521 and 8528

    0 %

    -

    31.12.2017

    ex 3919 10 80

    ex 3919 90 00

    ex 3920 10 89

    50

    41

    25

    Adhesive film consisting of a base of a copolymer of ethylene and vinyl acetate (EVA) of a thickness of 70 μm or more and an adhesive part of acrylic type of a thickness of 5 μm or more, for use in the grinding and/or dicing process of silicon discs (1)

    0 %

    -

    31.12.2018

    ex 3919 10 80

    ex 3919 90 00

    ex 3920 10 28

    ex 3920 10 89

    53

    34

    93

    50

    Polyethylene foil:

    — with pressure sensitive, non-rubber adhesive adhering solely to clean and smooth surfaces,

    — of a total thickness of 0,025 mm or more, but not more than 0,7 mm, and

    — of a total width of 6 cm or more, but not more than 1 m,

    — whether or not in rolls,

    of a kind used for the protection of the surface of products of headings 8521 and 8528

    0 %

    -

    31.12.2017

    ex 3919 10 80

    ex 3919 90 00

    55

    53

    Acrylic foam tape, covered on one side with a heat activatable adhesive or an acrylic pressure sensitive adhesive and on the other side with an acrylic pressure sensitive adhesive and a release sheet, of a peel adhesion at an angle of 90 ° of more than 25 N/cm (as determined by the ASTM D 3330 method)

    0 %

    -

    31.12.2017

    ex 3919 10 80

    ex 3919 90 00

    ex 3920 61 00

    57

    30

    30

    Reflecting sheet:

    — of a polycarbonate or acrylic polymer film embossed on one side in a regular shaped pattern

    — covered on one or both sides with one or more layers of plastic or metallisation, and

    — whether or not covered on one side with a self-adhesive layer and a release sheet

    0 %

    -

    31.12.2018

    ex 3919 10 80

    60

    Reflecting laminated sheet showing a regular pattern, consisting of a film of poly(methylmethacrylate), followed by a layer of acrylic polymer containing microprisms, a film of poly(methylmethacrylate), an adhesive layer and a release sheet

    0 %

    -

    31.12.2018

    ex 3919 10 80

    ex 3919 90 00

    67

    46

    Self-adhesive reflecting sheet whether or not in segmented pieces:

    — showing a regular pattern,

    — with or without an application tape layer,

    — consisting of a film of acrylic polymer followed by a layer of poly(methyl methacrylate) or polycarbonate containing microprisms,

    — whether or not containing an additional layer of polyester, and

    — an adhesive with a final release sheet

    0 %

    -

    31.12.2018

    ex 3919 10 80

    ex 3919 90 00

    70

    75

    Rolls of polyethylene foil:

    — self-adhesive on one side,

    — of a total thickness of 0,025 mm or more, but not more than 0,09 mm,

    — of a total width of 60 mm or more, but not more than 1 110 mm,

    of a kind used for the protection of the surface of products of headings 8521 or 8528

    0 %

    -

    31.12.2016

    ex 3919 10 80

    ex 3919 90 00

    75

    80

    Self-adhesive reflecting film, consisting of several layers including:

    — a copolymer of acrylic resin,

    — polyurethane,

    — a metallised layer with, on one side, laser imprints against counterfeiting, alteration or substitution of data or duplications, or an official mark for an intended use,

    — glass microspheres, and

    — an adhesive layer, with a release liner on one or both sides

    0 %

    -

    31.12.2016

    ex 3919 10 80

    ex 3919 90 00

    80

    83

    Acrylic tape put up in rolls:

    — self-adhesive on both sides,

    — of a total thickness of 0,04 mm or more, but not more than 1,25 mm,

    — of a total width of 5 mm or more but not more than 1 205 mm

    for use in the manufacture of products of headings 8521 and 8528  (1)

    0 %

    -

    31.12.2016

    ex 3919 10 80

    ex 3919 90 00

    85

    28

    Poly(vinyl chloride) or polyethylene or any other polyolefine film:

    — of a thickness of 65 μm or more,

    — coated on one side with an acrylic UV-sensitive adhesive and a polyester liner

    0 %

    -

    31.12.2019

    ex 3919 90 00

    19

    Transparent poly(ethylene terephthalate) self-adhesive film:

    — free from impurities or faults,

    — coated on one side with an acrylic pressure sensitive adhesive and a protective liner, and on the other side with an antistatic layer of ionic organic choline compound,

    — whether or not with a printable dust-proof layer of modified long chain alkyl organic compound,

    — with a total thickness without the liner of 54 μm or more but not more than 64 μm, and

    — a width of more than 1 295 mm but not more than 1 305 mm

    0 %

    -

    31.12.2018

    ex 3919 90 00

    23

    Film consisting of 1 to 3 laminated layers of poly(ethylene terephthalate) and a copolymer of terephthalic acid, sebacic acid and ethylene glycol, coated on one side with an acrylic abrasion resistant coating and on the other side with an acrylic pressure sensitive adhesive, a water soluble methylcellulose coating and a poly(ethylene terephthalate) protective liner

    0 %

    -

    31.12.2018

    ex 3919 90 00

    24

    Reflecting laminated sheet:

    — consisting of an epoxy acrylate layer embossed on one side in a regular shaped pattern,

    — covered on both sides with one or more layers of plastic material, and

    — covered on one side with an adhesive layer and a release sheet

    0 %

    -

    31.12.2019

    ex 3919 90 00

    25

    Film consisting of a multi-layer construction of poly(ethylene terephthalate) and copolymer of butylacrylate and methylmethacrylate, coated on one side with an acrylic abrasion resistant coating incorporating nanoparticles of antimony tin oxide and carbon black, and on the other side with an acrylic pressure sensitive adhesive and a silicone-coated poly(ethylene terephthalate) protective liner

    0 %

    -

    31.12.2017

    ex 3919 90 00

    27

    Poly(ethylene terephthalate) film, with an adhesive strength of not more than 0,147 N/25 mm and an electrostatic discharge of not more than 500 V

    0 %

    -

    31.12.2018

    ex 3919 90 00

    29

    Polyester film coated on both sides with an acrylic and/or rubber (pressure sensitive) adhesive put up in rolls of a width of 45,7 cm or more but not more than 132 cm (supplied with a release liner)

    0 %

    -

    31.12.2019

    ex 3919 90 00

    33

    Transparent poly(ethylene) self-adhesive film, free from impurities or faults, coated on one side with an acrylic pressure sensitive adhesive, with a thickness of 60 μm or more, but not more than 70 μm, and with a width of more than 1 245 mm but not more than 1 255 mm

    0 %

    -

    31.12.2018

    ex 3919 90 00

    35

    Reflecting layered sheet on rolls, with a width of more than 20 cm, showing an embossed regular pattern, consisting of poly(vinyl chloride) film coated on one side with:

    — a layer of polyurethane containing glass micro beads,

    — a layer of poly(ethylene vinyl acetate),

    — an adhesive layer, and

    — a release sheet

    0 %

    -

    31.12.2018

    ex 3919 90 00

    ex 3920 49 10

    36

    95

    Printed laminated sheet with a central layer of poly(vinyl chloride), coated on both sides with a layer of poly(vinyl fluoride)

    — whether or not with a pressure or heat sensitive adhesive layer

    — whether or not with a release film

    — with a toxicity (as determined by test method ABD 0031) of not more than 70 ppm hydrogen fluoride, not more than 120 ppm hydrogen chloride, not more than 10 ppm hydrogen cyanide, not more than 10 ppm nitrogen oxides, not more than 300 ppm carbon monoxide and not more than 10 ppm dihydrogen sulphide and sulphur dioxide taken together

    — with a flammability within 60 seconds of not more than 130 mm (as determined by test method FAR 25 App.F Pt. I Amdt.83)

    — with a weight (without release film) of 240 g/m2 (± 30 g/m2) without adhesive layer, of 340 g/m2 (± 40 g/m2) with heat sensitive adhesive layer or of 330 g/m2 (± 40 gm2) with pressure sensitive layer

    0 %

    m2

    31.12.2017

    ex 3919 90 00

    38

    Self-adhesive film composed of:

    — a top layer predominantly of polyurethane mixed with acrylic polymer emulsions and titanium dioxide,

    — whether or not containing a second layer of a mixture of vinyl acetate-ethylene copolymer and cross-linkable vinyl acetate polymer emulsions,

    — not more than 6 % by weight of other additives,

    — a pressure sensitive adhesive; and

    — covered on one side with a release liner,

    — whether or not with a separate self-adhesive over laminate protective film,

    — of a total thickness of not more than 400 μm

    0 %

    -

    31.12.2017

    ex 3919 90 00

    39

    Poly(vinyl chloride) sheeting, of a thickness of less than 1 mm, coated with an adhesive in which are embedded glass balls of a diameter of not more than 100 μm

    0 %

    -

    31.12.2018

    ex 3919 90 00

    40

    Film, with a total thickness of 40 μm or more, consisting of one or more layers of transparent polyester film:

    — containing at least one infrared reflective layer with a total normal reflectance according to EN 12898 of 80 % or more

    — having on one side a layer with a normal emissivity according to EN 12898 of not more than 0,2

    — coated on the other side with a pressure sensitive adhesive and a release liner

    0 %

    -

    31.12.2017

    ex 3919 90 00

    42

    Self-adhesive film composed of:

    — a first layer containing a mixture of thermoplastic polyurethane and anti-blocking agent,

    — a second layer containing a maleic anhydride copolymer,

    — a third layer containing a mixture of low density polyethylene, titanium dioxide and additives,

    — a fourth layer containing a mixture of low density polyethylene, titanium dioxide, additives and colour pigment,

    — a pressure sensitive adhesive; and

    — covered on one side with a release liner

    — whether or not with a separate self-adhesive over laminate protective film

    — of a total thickness of not more than 400 μm

    0 %

    -

    31.12.2017

    ex 3919 90 00

    ex 3921 90 60

    44

    95

    Printed laminated sheet

    — with a core layer of glass fabric, coated on each side with a layer of poly(vinyl chloride),

    — on one side covered with a layer of poly(vinyl fluoride),

    — whether or not with a pressure sensitive adhesive layer and a release film on the other side,

    — with a toxicity (as determined by test method ABD 0031) of not more than 50 ppm hydrogen fluoride, not more than 85 ppm hydrogen chloride, not more than 10 ppm hydrogen cyanide, not more than 10 ppm nitrogen oxides, not more than 300 ppm carbon monoxide and not more than 10 ppm dihydrogen sulphide and sulphur dioxide taken together,

    — with a flammability within 60 seconds of not more than 110 mm (as determined by test method FAR 25 App.F Pt. I Amdt.83), and

    — with a weight (without release film) of 490 g/m2 (± 45 g/m2) without adhesive layer or of 580 g/m2 (± 50 g/m2) with pressure sensitive layer

    0 %

    m2

    31.12.2017

    ex 3919 90 00

    ex 9001 20 00

    47

    40

    Polariser film, in rolls, consisting of a multilayered polyvinyl alcohol film, supported on either side by a triacetyl cellulose film, with a pressure sensitive adhesive and release film on one side

    0 %

    -

    31.12.2017

    ex 3919 90 00

    48

    Transparent poly(vinyl chloride) film:

    — coated on one side with an acrylic UV-sensitive adhesive with an adhesive strength of 70 N/m or more, which is reduced upon irradiation,

    — with a polyester liner

    — with a total thickness without release liner of 78 μm or more

    0 %

    -

    31.12.2019

    ex 3919 90 00

    49

    Reflecting laminated sheet consisting of a film of poly(methyl methacrylate) embossed on one side in a regular shaped pattern, a film of a polymer containing glass microspheres, an adhesive layer and a release sheet

    0 %

    -

    31.12.2018

    ex 3919 90 00

    51

    Biaxially-oriented film of poly(methyl methacrylate), of a thickness of 50 μm or more but not exceeding 90 μm, covered on one side with an adhesive layer and a release sheet

    0 %

    -

    31.12.2018

     (7)ex 3919 90 00

    60

    Reflecting film containing:

    — a poly(vinyl chloride) layer,

    — a polyurethane layer,

    — a glass microspheres layer,

    — a layer whether or not incorporating a security and/or official mark which changes appearance with angle of view,

    — a metallised aluminium layer, and

    — an adhesive, covered on one side with a release liner

    0 %

    -

    31.12.2020

     (7)ex 3919 90 00

    63

    Co-extruded trilayer film,

    — each layer containing a mixture of polypropylene and polyethylene,

    — containing not more than 3 % by weight of other polymers,

    — whether or not containing titanium dioxide in the core layer,

    — coated with an acrylic pressure sensitive adhesive, and

    — with a release liner

    — of an overall thickness of not more than 110 μm

    0 %

    -

    31.12.2020

     (7)ex 3919 90 00

    65

    Self-adhesive film with a thickness of 40 μm or more, but not more than 400 μm, consisting of one or more layers of transparent, metallised or dyed poly(ethylene terephthalate), covered on one side with a scratch resistant coating and on the other side with a pressure sensitive adhesive and a release liner

    0 %

    -

    31.12.2020

    ex 3919 90 00

    67

    Self-adhesive plastic film consisting of:

    — a poly(olefin) layer with a thickness of more than 95 but not more than 110 microns

    — an adhesive layer with a thickness of more than 5 but not more than 15 microns

    — a layer based on epoxy resin, with a thickness of more than 4 but not more than 100 microns

    — a liner consisting of poly(ethylene terephthalate) with a thickness of more than 35 but not more than 40 microns

    0 %

    m2

    31.12.2018

     (7)ex 3919 90 00

    70

    Self-adhesive polishing discs of microporous polyurethane, whether or not coated with a pad

    0 %

    -

    31.12.2020

    ex 3919 90 00

    81

    Film of a minimum thickness of 0,36 mm, consisting of the following:

    — an embossed polyester layer,

    — a caprolactone-cyclohexylene isocyanate copolymer layer,

    — a pressure sensitive adhesive

    and covered on one side with a release liner

    0 %

    -

    31.12.2018

    ex 3919 90 00

    85

    Multi-layered film of poly(methyl methacrylate) and metallised layers of silver and copper:

    — having a minimum reflectance of 93,5 % as determined by ASTM G173-03,

    — covered on one side with a removable layer of polyethylene,

    — covered on the other side with an acrylic pressure sensitive adhesive and a siliconised polyester liner

    0 %

    -

    31.12.2016

    ex 3919 90 00

    87

    Self-adhesive transparent film, having a transmittance of more than 90 % and a haze of less than 3 % (as determined by ASTM D1003), consisting of several layers including:

    — an acrylic adhesive layer with a thickness of 20 μm or more but not more than 70 μm,

    — a polyurethane based layer with a thickness of 100 μm or more but not more than 300 μm

    0 %

    -

    31.12.2016

    ex 3920 10 25

    ex 3920 10 89

    10

    20

    Film of a thickness of not more than 0,20 mm, of a blend of polyethylene and a copolymer of ethylene with oct-1-ene, embossed in a regular rhomboidal pattern, for coating both sides of a layer of unvulcanized rubber (1)

    0 %

    -

    31.12.2018

    ex 3920 10 25

    20

    Film of polyethylene, of a kind used for typewriter ribbon

    0 %

    -

    31.12.2018

    ex 3920 10 28

    30

    Printed embossed film

    — of polymers of ethylene

    — having a gravity of 0,94 g/cm3 or more

    — of a thickness of 0,019 mm ± 0,003 mm

    — with permanent graphics consisting of two different alternating designs whose individual length is 525 mm or more

    0 %

    -

    31.12.2019

    ex 3920 10 28

    91

    Poly(ethylene) film printed with a graphic design, which is achieved by using four base colours in ink plus specialist colours, to achieve multiple colours in ink on one side of the film, and one colour on the opposite side, the graphic design also has the following characteristics:

    — is repetitive and equally spaced along the length of the film

    — is equally and visibly aligned when viewed from the back or front of the film

    0 %

    -

    31.12.2018

    ex 3920 10 40

    30

    Co-extruded seven to nine layered film predominately of copolymers of ethylene or functionalized polymers of ethylene, consisting of:

    — a tri-layer barrier with a core layer predominantly of ethylene vinyl alcohol covered on either side with a layer predominantly of cyclic olefin polymers,

    — covered on either side with two or more layers of polymeric material,

    and having an overall total thickness of not more than 110 μm

    0 %

    -

    31.12.2017

     (7)ex 3920 10 40

    40

    Tubular layered film predominately of polyethylene:

    — consisting of a tri-layer barrier with a core layer of ethylene vinyl alcohol covered on either side with a layer of polyamide, covered on either side with at least one layer of polyethylene,

    — having a total thickness of 55 μm or more,

    — having a diameter of 500 mm or more but not more than 600 mm

    0 %

    -

    31.12.2020

    ex 3920 10 89

    30

    Ethylene vinyl acetate (EVA) film with:

    — a raised relief surface with embossed undulations, and

    — a thickness of more than 0,125 mm

    0 %

    -

    31.12.2016

    ex 3920 10 89

    40

    Composite sheet containing an acrylic coating and laminated to a high-density polyethylene layer, of a total thickness of 0,8 mm or more but not more than 1,2 mm

    0 %

    -

    31.12.2016

    ex 3920 20 21

    30

    Biaxially oriented polypropylene film with a coextruded layer of polyethylene on one side and a total thickness of 11,5 μm or more but not more than 13,5 μm

    0 %

    -

    31.12.2018

    ex 3920 20 21

    40

    Sheets of biaxially — oriented polypropylene film:

    — with the thickness of not more than 0,1 mm,

    — printed on both sides with specialised coatings to allow banknote security printing

    0 %

    -

    31.12.2016

    ex 3920 20 29

    ex 8507 90 30

    50

    95

    Sheet of polypropylene in the form of a roll:

    — with a thickness of not more than 30 μm,

    — of a width of not more than 210 mm,

    — conforming to ASTM D882,

    for use in the manufacture of separators for lithium-ion electric vehicle batteries (1)

    0 %

    -

    31.12.2016

    ex 3920 20 29

    ex 3920 20 80

    55

    93

    Co-extruded seven to nine layered film predominately of copolymers of propylene, consisting of:

    — a tri-layer barrier with a core layer predominantly of ethylene vinyl alcohol covered on either side with a layer predominantly of cyclic olefin polymers,

    — covered on either side with two or more layers of polymeric material,

    and having an overall total thickness of not more than 110 μm

    0 %

    -

    31.12.2017

    ex 3920 20 29

    92

    Mono-axial oriented film, of a total thickness of not more than 75 μm, consisting of two or three layers, each layer containing a mixture of polypropylene and polyethylene, with a core layer whether or not containing titanium dioxide, having:

    — a tensile strength in the machine direction of 140 MPa or more but not more than 270 MPa, and

    — a tensile strength in the transverse direction of 20 MPa or more but not more than 40 MPa

    as determined by test method ASTM D882/ISO 527-3

    0 %

    -

    31.12.2018

    ex 3920 20 29

    93

    Mono-axial oriented film, consisting of three layers, each layer consisting of a mixture of polypropylene and a copolymer of ethylene and vinyl acetate, having:

    — a thickness of 55 μm or more but not more than 97 μm,

    — a tensile modulus in the machine direction of 0,75 GPa or more but not more than 1,45 GPa, and

    — a tensile modulus in the transverse direction of 0,20 GPa or more but not more than 0,55 GPa

    0 %

    -

    31.12.2019

    ex 3920 20 29

    94

    Co-extruded trilayer film,

    — each layer containing a mixture of polypropylene and polyethylene,

    — containing not more than 3 % by weight of other polymers,

    — whether or not containing titanium dioxide in the core layer,

    — of an overall thickness of not more than 70 μm

    0 %

    -

    31.12.2016

    ex 3920 20 80

    92

    Laminated sheet or strip, consisting of a film of a thickness of 181 μm or more but not more than 223 μm composed of a blend of a copolymer of propylene with ethylene and a copolymer of styrene-ethylene-butylene-styrene (SEBS) coated or covered on one side with a layer of a copolymer of styrene-ethylene-butylene-styrene (SEBS) and a layer of polyester

    0 %

    -

    31.12.2018

    ex 3920 20 80

    95

    Polypropylene sheet, put up in rolls, with:

    — flame retardant level of UL 94 V-0 for material thicknesses of 0,25 mm or more and level UL 94 VTM-0 for material thicknesses of 0,05 mm or more but not more than 0,25 mm (as determined by Flammability Standard UL-94)

    — dielectric breakdown of 13,1 kV or more but not more than 60,0 kV(as determined by ASTM D149)

    — tensile yield in a machine direction of 30 MPa or more but not more than 33 MPa (as determined by ASTM D882)

    — tensile yield in a transverse direction of 22 MPa or more but not more than 25 MPa (as determined by ASTM D882)

    — density range of 0,988 g/cm3 or more but not more than 1,035 g/cm3 (as determined by ASTM D792)

    — moisture absorption of 0,01 % or more but not more than 0,06 % (as determined by ASTM D570)

    for use in the manufacture of insulators used in the electronics and electrical industries (1)

    0 %

    m3

    31.12.2017

    ex 3920 43 10

    92

    Sheeting of poly(vinyl chloride), stabilized against ultraviolet rays, without any holes, even microscopic, of a thickness of 60 μm or more but not more than 80 μm, containing 30 or more but not more than 40 parts of plasticiser to 100 parts of poly(vinyl chloride)

    0 %

    -

    31.12.2018

    ex 3920 43 10

    ex 3920 49 10

    94

    93

    Film of a specular gloss of 70 or more, measured at an angle of 60 ° using a glossmeter (as determined by the ISO 2813:2000 method), consisting of one or two layers of poly(vinyl chloride) coated on both sides with a layer of plastic, of a thickness of 0,26 mm or more but not more than 1,0 mm, covered on the gloss surface with a protective film of polyethylene, in rolls of a width of 1 000 mm or more but not more than 1 450 mm, for use in the manufacture of goods of heading 9403  (1)

    0 %

    -

    31.12.2018

    ex 3920 43 10

    95

    Reflecting laminated sheet, consisting of a film of poly(vinyl chloride) and a film of an other plastic totally embossed in a regular pyramidal pattern, covered on one side with a release sheet

    0 %

    -

    31.12.2018

    ex 3920 49 10

    30

    Film of a (polyvinyl)chloride-copolymer

    — containing by weight 45 % or more of fillers

    — on a support

    0 %

    -

    31.12.2018

    ex 3920 51 00

    20

    Plate of poly(methyl methacrylate) containing aluminium trihydroxide, of a thickness of 3,5 mm or more but not more than 19 mm

    0 %

    -

    31.12.2018

    ex 3920 51 00

    30

    Biaxially-oriented film of poly(methyl methacrylate), of a thickness of 50 μm or more but not exceeding 90 μm

    0 %

    -

    31.12.2018

    ex 3920 51 00

    40

    Sheets of polymethylmethacrylate conforming to standard EN 4366 (MIL-PRF-25690)

    0 %

    -

    31.12.2018

    ex 3920 59 90

    10

    Non-cellular and non-laminated sheet of modified copolymer of acrylonitrile-methyl acrylate with a thickness of 1,0 mm or more but not more than 1,3 mm, put up in rolls

    0 %

    -

    31.12.2016

    ex 3920 59 90

    30

    Non-self-adhesive reflecting film, consisting of several layers including:

    — a copolymer of acrylic resin

    — polyurethane

    — a metallised layer with, on one side, laser imprints against counterfeiting, alteration or substitution of data or duplications, or an official mark for an intended use

    — glass microspheres, and

    — a permanent liner of poly(ethyleneterephthalate)

    0 %

    -

    31.12.2016

    ex 3920 62 19

    02

    Coextruded opaque sheet of poly(ethylene terephthalate), of a thickness of 50 μm or more but not more than 350 μm, consisting especially of a layer containing carbon black

    0 %

    -

    31.12.2018

    ex 3920 62 19

    08

    Poly(ethylene terephthalate) film, not coated with an adhesive, of a thickness of not more than 25 μm, either:

    — only dyed in the mass, or

    — dyed in the mass and metallised on one side

    0 %

    -

    31.12.2018

    ex 3920 62 19

    12

    Film of poly(ethylene terephthalate) only, of a total thickness of not more than 120 μm, consisting of one or two layers each containing a colouring and/or UV-absorbing material throughout the mass, uncoated with an adhesive or any other material

    0 %

    -

    31.12.2018

    ex 3920 62 19

    18

    Laminated film of poly(ethylene terephthalate) only, of a total thickness of not more than 120 μm, consisting of one layer which is metallised only and one or two layers each containing a colouring and/or UV-absorbing material throughout the mass, uncoated with an adhesive or any other material

    0 %

    -

    31.12.2018

    ex 3920 62 19

    20

    Reflecting polyester sheeting embossed in a pyramidal pattern, for the manufacture of safety stickers and badges, safety clothing and accessories thereof, or of school satchels, bags or similar containers (1)

    0 %

    -

    31.12.2018

    ex 3920 62 19

    38

    Poly(ethylene terephthalate) film, of a thickness of not more than 12 μm, coated on one side with a layer of aluminium oxide of a thickness of not more than 35 nm

    0 %

    -

    31.12.2018

     (7)ex 3920 62 19

    48

    Sheets or rolls of poly(ethylene terephthalate):

    — coated on both sides with a layer of epoxy acrylic resin,

    — of a total thickness of 37 μm (± 3 μm)

    0 %

    -

    31.12.2020

    ex 3920 62 19

    52

    Film of poly(ethylene terephthalate), poly(ethylene naphthalate) or similar polyester, coated on one side with metal and/or metal oxides, containing by weight less than 0,1 % of aluminium, of a thickness of not more than 300 μm and having a surface resistivity of not more than 10 000 ohms (per square) (as determined by the ASTM D 257-99 method)

    0 %

    -

    31.12.2018

    ex 3920 62 19

    60

    Poly (ethylene terephtalate) film:

    — of a thickness of not more than 20 μm,

    — coated on at least one side with a gas barrier layer consisting of a polymeric matrix in which silica or aluminium oxide has been dispersed and of a thickness of not more than 2μm

    0 %

    -

    31.12.2017

    ex 3920 62 19

    ex 3920 69 00

    73

    40

    Iridescent film of polyester and poly(methyl methacrylate)

    0 %

    -

    31.12.2018

    ex 3920 62 19

    76

    Transparent poly(ethylene terephthalate) film:

    — coated on both sides with layers of organic substances on the basis of acryl of a thickness of 7 nm or more but not more than 80 nm,

    — with a surface tension of 36 Dyne/cm or more but not more than 39 Dyne/cm,

    — with a light transmission of more than 93 %,

    — with a haze value of not more than 1,3 %,

    — with a total thickness of 10 μm or more but not more than 350 μm,

    — with a width of 800 mm or more but not more than 1 600 mm

    0 %

    -

    31.12.2018

    ex 3920 69 00

    20

    Film of poly(ethylene naphthalene-2,6-dicarboxylate)

    0 %

    -

    31.12.2018

    ex 3920 69 00

    50

    Monolayer, biaxially oriented film:

    — composed of more than 85 % by weight of poly(lactic acid) and not more than 10,50 % by weight of modified poly(lactic acid) based polymer, poly-glycol ester and talc,

    — having a thickness of 20 μm or more but not more than 120 μm

    — biodegradable and compostable (as determined by the method EN 13432)

    0 %

    -

    31.12.2019

    ex 3920 69 00

    60

    Monolayer, transverse oriented, shrink film:

    — composed of more than 80 % by weight of poly(lactic acid) and not more than 15,75 % by weight of additives of modified poly(lactic acid),

    — having a thickness of 45 μm or more but not more than 50 μm,

    — biodegradable and compostable (as determined by the method EN 13432)

    0 %

    -

    31.12.2019

    ex 3920 79 10

    10

    Sheets of painted vulcanised fibre-board with a thickness of not more than 1,5 mm

    0 %

    p/st

    31.12.2019

    ex 3920 91 00

    51

    Poly(vinyl butyral) film containing by weight 25 % or more but not more than 28 % of tri-isobutyl phosphate as a plasticiser

    0 %

    -

    31.12.2019

    ex 3920 91 00

    52

    Poly(vinyl butyral) film:

    — containing by weight 26 % or more but not more than 30 % of triethyleneglycol bis(2-ethyl hexanoate) as a plasticiser,

    — with a thickness of 0,73 mm or more but not more than 1,50 mm

    0 %

    -

    31.12.2019

    ex 3920 91 00

    91

    Poly(vinyl butyral) film having a graduated coloured band

    3%

    -

    31.12.2018

    ex 3920 91 00

    93

    Film of poly(ethylene terephthalate), whether or not metallised on one or both sides, or laminated film of poly(ethylene terephthalate) films, metallised on the external sides only, and having the following characteristics:

    — a visible light transmission of 50 % or more,

    — coated on one or both sides with a layer of poly(vinyl butyral) but not coated with an adhesive or any other material except poly(vinyl butyral),

    — a total thickness of not more than 0,2 mm without taking the presence of poly(vinyl butyral) into account and a thickness of poly(vinyl butyral) of more than 0,2 mm

    0 %

    -

    31.12.2019

    ex 3920 91 00

    95

    Co-extruded trilayer poly(vinyl butyral) film with a graduated colour band containing by weight 29 % or more but not more than 31 % of 2,2′-ethylenedioxydiethyl bis(2-ethylhexanoate) as a plasticiser

    0 %

    -

    31.12.2018

    ex 3920 92 00

    30

    Polyamide film:

    — of a thickness of not more than 20 μm,

    — coated on at least one side with a gas barrier layer which consists of a polymeric matrix in which silica has been dispersed and of a thickness of not more than 2 μm

    0 %

    -

    31.12.2018

    ex 3920 99 28

    35

    Polyether imide sheets, in rolls, with

    — a thickness of 5 μm or more, but not more than 14 μm,

    — a width of 478 mm or more, but not more than 532 mm,

    — a tensile strength at break of 78 MPa or more (as determined by JIS C-2318 for a film thickness of 50 μm),

    — an elongation at break of 50 % or more (as determined by JIS C-2318 for a film thickness of 50 μm),

    — a glass transition point (Tg) of 226 °C,

    — a continuous service temperature of 180 °C (as determined by UL-746 B for a film thickness of 50 μm),

    — a flammability of VTM-0 (as determined by UL 94 for a film thickness of 25 μm)

    0 %

    -

    31.12.2018

    ex 3920 99 28

    40

    Polymer film containing the following monomers:

    — poly (tetramethylene ether glycol),

    — bis (4-isocyanotocyclohexyl) methane,

    — 1,4-butanediol or 1,3-butanediol,

    — with a thickness of 0,25 mm or more but not more than 5,0 mm,

    — embossed with a regular pattern on one surface,

    — and covered with a release sheet

    0 %

    -

    31.12.2018

    ex 3920 99 28

    45

    Transparent polyurethane film metallised on one side:

    — with a gloss of more than 90 degrees according to ASTM D2457

    — covered on the metalized side with a heat bonding adhesive layer consisting of polyethylene/polypropylene copolymer

    — covered on the other side with a protective poly(ethylene terephthalate) film

    — with a total thickness of more than 204 μm but not more than 244 μm

    0 %

    -

    31.12.2018

    ex 3920 99 28

    50

    Thermoplastic polyurethane film, of a thickness of 250 μm or more but not more than 350 μm, covered on one side with a removable protective film

    0 %

    -

    31.12.2016

    ex 3920 99 28

    55

    Thermoplastic polyurethane film extruded, with:

    — not self-adhesive,

    — an index of yellow lower of more than 1,0 but not more than 2,5 for 10 mm stacked films (as determined by test method ASTM E 313-10),

    — a light transmission higher to 87 % for 10 mm stacked films (as determined by test method ASTM D 1003-11),

    — a total thickness of 0,38 mm or more, but not more than 7,6 mm,

    — a width of 99 cm or more, but not more than 305 cm,

    — of a kind used in the production of laminated safety glass

    0 %

    -

    31.12.2017

    ex 3920 99 28

    60

    Silicone tape, plate or strip:

    — of a total thickness of 2 mm or more, but not more than 9 mm,

    — of a total width of 12 mm or more, but not more than 65 mm,

    for use in the manufacture of products of headings 8521 or 8528  (1)

    0 %

    -

    31.12.2016

    ex 3920 99 28

    65

    Matt, thermoplastic polyurethane foil in rolls with:

    — a width of 1 640 mm (± 10 mm),

    — a gloss of 3,3 degrees or more but not more than 3,8 (as determined by the method ASTM D2457),

    — a surface roughness of 1,9 Ra or more but not more than 2,8 Ra (as determined by the method ISO 4287),

    — a thickness of more than 365 μm but not more than 760 μm,

    — a hardness of 90 (± 4) (as determined by the method: Shore A (ASTM D2240)),

    — an elongation to break of 470 % (as determined by the method: EN ISO 527)

    0 %

    m2

    31.12.2019

    ex 3920 99 28

    70

    Sheets on rolls, consisting of epoxy resin, with conducting properties, containing:

    — microspheres with a coating of metal, whether or not alloyed with gold,

    — an adhesive layer,

    — with a protective layer of silicone or poly(ethylene terephthalate) on one side,

    — with a protective layer of poly(ethylene terephthalate) on the other side, and

    — with a width of 5 cm or more but not more than 100 cm

    — with a length of not more than 2 000 m

    0 %

    -

    31.12.2016

    ex 3920 99 28

    75

    Thermoplastic polyurethane foil in rolls with:

    — a width of more than 900 mm but not more than 1 016 mm,

    — a matt finish,

    — a thickness of 0,43 mm (± 0,03 mm),

    — an elongation to break of 420 % or more but not more than 520 %,

    — a tensile strength of 55 N/mm2 (± 3) (as determined by the method EN ISO 527)

    — a hardness of 90 (± 4) (as determined by the method: Shore A [ASTM D2240]),

    — wrinkle inside (waves) of 6,35 mm,

    — a flatness of 0,025 mm

    0 %

    m2

    31.12.2019

    ex 3920 99 59

    25

    Poly(1-chlorotrifluoroethylene) film

    0 %

    -

    31.12.2018

    ex 3920 99 59

    50

    Polytetrafluoroethylene film, non-microporous, in the form of rolls, of a thickness of 0,019 mm or more but not more than 0,14 mm, impermeable to water vapour

    0 %

    -

    31.12.2018

    ex 3920 99 59

    55

    Ion-exchange membranes of fluorinated plastic material

    0 %

    -

    31.12.2018

    ex 3920 99 59

    60

    Film of a vinyl alcohol copolymer, soluble in cold water, of a thickness of 34 μm or more but not more than 90 μm, a tensile strength at break of 20 MPa or more but not more than 45 MPa and an elongation at break of 250 % or more but not more than 900 %

    0 %

    -

    31.12.2018

    ex 3920 99 90

    20

    Anisotropic conductive film, in rolls, of a width of 1,5 mm or more but not more than 3,15 mm and a maximum length of 300 m, used for joining electronic components in the production of LCD or plasma displays

    0 %

    -

    31.12.2018

    ex 3921 13 10

    10

    Sheet of polyurethane foam, of a thickness of 3 mm (± 15 %) and of a specific gravity of 0,09435 or more but not more than 0,10092

    0 %

    -

    31.12.2018

    ex 3921 13 10

    20

    Rolls of open-cell polyurethane foam:

    — with a thickness of 2,29 mm (± 0,25 mm),

    — surface-treated with a foraminous adhesion promoter, and

    — laminated to a polyester film and a layer of textile material

    0 %

    -

    31.12.2017

    ex 3921 19 00

    30

    Blocks with cellular structure, containing by weight:

    — polyamide-6 or poly(epoxy anhydride)

    — 7 % or more but not more than 9 % of polytetrafluorethylene if present

    — 10 % or more but not more than 25 % of inorganic fillers

    0 %

    -

    31.12.2018

    ex 3921 19 00

    91

    Microporous polypropylene film of a thickness of not more than 100 μm

    0 %

    -

    31.12.2018

    ex 3921 19 00

    93

    Strip of microporous polytetrafluoroethylene on a support of a non-woven, for use in the manufacture of filters for kidney dialysis equipment (1)

    0 %

    -

    31.12.2018

    ex 3921 19 00

    95

    Film of polyethersulfone, of a thickness of not more than 200 μm

    0 %

    -

    31.12.2018

    ex 3921 19 00

    96

    Cellular film, consisting of a layer of polyethylene of a thickness of 90 μm or more but not more than 140 μm and a layer of regenerated cellulose of a thickness of 10 μm or more but not more than 40 μm

    0 %

    -

    31.12.2018

    ex 3921 90 10

    10

    Composite plate of poly(ethylene terephthalate) or of poly(butylene terephthalate), reinforced with glass fibres

    0 %

    -

    31.12.2018

    ex 3921 90 10

    20

    Poly(ethylene terephthalate) film, laminated on one side or on both sides with a layer of unidirectional nonwoven poly(ethylene terephthalate) and impregnated with polyurethane or epoxide resin

    0 %

    -

    31.12.2018

    ex 3921 90 10

    30

    Multilayer film consisting of:

    — a poly(ethylene terephthalate) film with a thickness of more than 100 μm but not more than 150 μm,

    — a primer of phenolic material with a thickness of more than 8 μm but not more than 15 μm,

    — an adhesive layer of a synthetic rubber with a thickness of more than 20 μm but not more than 30 μm,

    — and a transparent poly(ethylene terephthalate) liner with a thickness of more than 35 μm but not more than 40 μm

    0 %

    m2

    31.12.2018

    ex 3921 90 55

    20

    Pre-impregnated reinforced fibreglass containing cyanate ester resin or bismaleimide (B) triazine (T) resin mixed with epoxide resin, measuring:

    — 469,9 mm (± 2 mm) × 622,3 mm (± 2 mm), or

    — 469,9 mm (± 2 mm) × 414,2 mm (± 2 mm), or

    — 546,1 mm (± 2 mm) × 622,3 mm (± 2 mm

    for use in the manufacture of printed circuit boards (1)

    0 %

    -

    31.12.2018

    ex 3921 90 55

    ex 7019 40 00

    ex 7019 40 00

    25

    21

    29

    Prepreg sheets or rolls containing polyimide resin

    0 %

    -

    31.12.2019

     (7)ex 3921 90 55

    40

    Three layered fabric sheet, in rolls,

    — comprising a core layer of 100 % Nylon Taffeta or Nylon/Polyester blended Taffeta,

    — coated on both sides with polyamide,

    — of a total thickness not more than 135 μm,

    — of a total weight not more than 80 g/m2

    0 %

    -

    31.12.2020

    ex 3921 90 60

    30

    Heat-, infra- and UV insulating poly(vinyl butyral) film:

    — laminated with a metal layer with a thickness of 0,05 mm(± 0,01 mm),

    — containing by weight 29,75 % or more but not more than 40,25 % of triethyleneglycol di (2-ethyl hexanoate) as plasticiser,

    — with a light transmission of 70 % or more (as determined by the ISO 9050 standard);

    — with an UV transmission of 1 % or less (as determined by the ISO 9050 standard);

    — with a total thickness of 0,43 mm (± 0,043 mm)

    0 %

    m2

    31.12.2019

    ex 3921 90 60

    ex 5407 71 00

    ex 5903 90 99

    91

    20

    10

    Woven polytetrafluoroethylene fabric, coated or covered with a copolymer of tetrafluoroethylene and trifluoroethylene having perfluorinated alkoxy side-chains ending in carboxylic acid or sulphonic acid groups, whether or not in the potassium or sodium salt form

    0 %

    -

    31.12.2018

    ex 3921 90 60

    93

    Film, of a specular gloss of 30 or more but not more than 60 measured at an angle of 60 ° using a glossmeter (as determined by the ISO 2813:2000 method), consisting of a layer of poly(ethylene terephthalate) and a layer of coloured poly(vinyl chloride), joined by a metallised adhesive coating, for coating panels and doors of a kind used in the manufacture of domestic appliances (1)

    0 %

    -

    31.12.2018

    ex 3921 90 90

    ex 8507 90 80

    10

    50

    Roll of polymer-metal laminate comprising:

    — a layer of poly(ethylene terephthalate),

    — a layer of aluminium,

    — a layer of polypropylene,

    — with a width of not more than 275 mm,

    — a total thickness of not more than 165 μm, and

    — conforming to ASTM D1701-91 and ASTM D882-95A

    for use in the manufacture of lithium-ion electric vehicle batteries (1)

    0 %

    -

    31.12.2016

    ex 3923 10 00

    10

    Photomask or wafer compacts:

    — consisting of antistatic materials or blended thermoplastics proving special electrostatic discharge (ESD) and outgassing properties,

    — having non porous, abrasion resistant or impact resistant surface properties,

    — fitted with a specially designed retainer system that protects the photomask or wafers from surface or cosmetic damage and

    — with or without a gasket seal,

    of a kind used in the photolithography or other semiconductor production to house photomasks or wafers

    0 %

    -

    31.12.2016

    ex 3923 30 90

    10

    Polyethylene container, for compressed hydrogen:

    — with aluminium bosses at both ends,

    — wholly embedded in an overwrap of carbon fibres impregnated with epoxide resin,

    — of a diameter of 213 mm or more, but not more than 368 mm,

    — a length of 860 mm or more, but not more than 1 260 mm, and

    — a capacity of 18 litres or more, but not more than 50 litres

    0 %

    p/st

    31.12.2018

     (7)ex 3926 30 00

    ex 8708 29 90

    10

    10

    Plastic cover of the exterior rear-view mirror for motor vehicles with clips

    0 %

    p/st

    31.12.2020

    ex 3926 90 92

    20

    Reflecting sheeting or tape, consisting of a facing-strip of poly(vinyl chloride) embossed in a regular pyramidal pattern, heat-sealed in parallel lines or in a grid-pattern to a backing-strip of plastic material, or of knitted or woven fabric covered on one side with plastic material

    0 %

    -

    31.12.2018

    ex 3926 90 97

    10

    Microspheres of a polymer of divinylbenzene, of a diameter of 4,5 μm or more but not more than 80 μm

    0 %

    -

    31.12.2018

    ex 3926 90 97

    15

    Glass fibre reinforced plastic traverse leaf spring for use in the manufacture of motor vehicle suspension systems (1)

    0 %

    -

    31.12.2018

     (7)ex 3926 90 97

    ex 8543 90 00

    20

    15

    Housings, housing parts, drums, setting wheels, frames, covers and other parts of acrylonitrile-butadiene-styrene of a kind used for the manufacture of remote controls

    0 %

    p/st

    31.12.2019

    ex 3926 90 97

    25

    Unexpansible microspheres of a copolymer of acrylonitrile, methacrylonitrile and isobornyl methacrylate, of a diameter of 3 μm or more but not more than 4,6 μm

    0 %

    -

    31.12.2018

     (7)ex 3926 90 97

    30

    Parts of car radio and car air-conditioner front panels

    — of acrylonitrile-butadiene-styrene with or without polycarbonate,

    — coated with a copper, a nickel and a chrome layers,

    — with a total thickness of coating of 5,54 μm or more but not more than 49,6 μm

    0 %

    -

    31.12.2016

    ex 3926 90 97

    ex 8538 90 99

    37

    40

    Polycarbonate control interface buttons for steering pad switches coated on the outside with scratch resistant paint

    0 %

    p/st

    31.12.2019

    ex 3926 90 97

    50

    Knob of car radio front panel, made of Bisphenol A-based polycarbonate

    0 %

    p/st

    31.12.2018

    ex 3926 90 97

    55

    Flat product of polyethylene, perforated in opposing directions, of a thickness of 600 μm or more but not more than 1 200 μm and of a weight of 21 g/m2 or more but not more than 42 g/m2

    0 %

    m2

    31.12.2018

    ex 3926 90 97

    65

    Die-cast decoration element made of polycarbonate resin, coated with

    — a silver-colour acrylic paint, and

    — a transparent scratch-resistant paint

    of a kind used in the manufacture of car radio front panels

    0 %

    p/st

    31.12.2018

    ex 4007 00 00

    10

    Siliconated vulcanised rubber thread and cord

    0 %

    -

    31.12.2018

     (7)ex 4009 42 00

    20

    Rubber brake hose with

    — textile strings,

    — a wall thickness of 3,2 mm,

    — a metal hollow terminal pressed on both ends, and

    — one or more mounting brackets,

    of kind used in the manufacture of goods of Chapter 87

    0 %

    -

    31.12.2020

    ex 4016 99 97

    20

    Soft rubber sealing stoppers for the manufacture of electrolytic capacitors (1)

    0 %

    -

    31.12.2018

    ex 4016 99 97

    30

    Tyre moulding bladder

    0 %

    -

    31.12.2016

    ex 4104 41 19

    10

    Buffalo leather, split, chrome tanned synthetic retanned (‘crust’), dry

    0 %

    -

    31.12.2017

    4105 10 00

    4105 30 90

     

    Sheep or lamb skin leather, without wool on, tanned or retanned but not further prepared, whether or not split, other than leather of heading 4114

    0 %

    -

    31.12.2018

    4106 21 00

    4106 22 90

     

    Goat or kid skin leather, without hair on, tanned or retanned but not further prepared, whether or not split, other than leather of heading 4114

    0 %

    -

    31.12.2018

    4106 31 00

    4106 32 00

    4106 40 90

    4106 92 00

     

    Leather of other animals, without hair on, not further prepared than tanned, other than leather of heading 4114

    0 %

    -

    31.12.2018

    ex 4408 39 30

    10

    Okoume veneer sheets:

    — of a length of 1 270 mm or more, but not more than 3 200 mm,

    — of a width of 150 mm or more, but not more than 2 000 mm,

    — of a thickness of 0,5 mm or more, but not more than 4 mm,

    — not sanded, and

    — not planed

    0 %

    -

    31.12.2018

    ex 5004 00 10

    10

    Silk yarn (other than yarn spun from silk waste) not put up for retail sale, unbleached, scoured or bleached, entirely of silk

    0 %

    -

    31.12.2016

    ex 5005 00 10

    ex 5005 00 90

    10

    10

    Yarn spun entirely from silk waste (noil), not put up for retail sale

    0 %

    -

    31.12.2018

    ex 5205 31 00

    10

    Six ply yarn of bleached cotton, measuring 925 dtex or more but not more than 989 dtex per single yarn, for the manufacture of tampons (1)

    0 %

    -

    31.12.2018

    5208 11 10

     

    Fabrics for the manufacture of bandages, dressings and medical gauzes

    5,2%

    -

    31.12.2018

    ex 5402 45 00

    20

    Yarn of synthetic textile fibres solely of aromatic polyamides obtained by the polycondensation of m-phenylenediamine and isophthalic acid

    0 %

    -

    31.12.2018

    ex 5402 47 00

    10

    Synthetic bicomponent filament yarn, not textured, untwisted, measuring 1 650 decitex or more but not more than 1 800 decitex, consisting of 110 filaments or more but not more than 120 filaments, each having a core of poly(ethylene terephthalate) and a skin of polyamide-6, containing by weight 75 % or more but not more than 77 % of poly(ethylene terephthalate), for use in the manufacture of roofings (1)

    0 %

    -

    31.12.2016

     (7)ex 5402 47 00

    20

    Bicomponent monofilament yarn of not more than 30 dtex, consisting of:

    — a poly(ethylene terephthalate) core, and

    — an outer layer of a copolymer of poly(ethyleneterephthalate) and poly(ethyleneisophthalate),

    for use in the manufacture of filtration fabrics (1)

    0 %

    -

    31.12.2020

    ex 5402 49 00

    30

    Yarn of a copolymer of glycollic acid with lactic acid, for the manufacture of surgical sutures (1)

    0 %

    -

    31.12.2018

    ex 5402 49 00

    50

    Non-textured filament yarn of poly(vinyl alcohol)

    0 %

    -

    31.12.2018

    ex 5402 49 00

    70

    Synthetic filament yarn, single, containing by weight 85 % or more of acrylonitrile, in the form of a wick containing 1 000 continuous filaments or more but not more than 25 000 continuous filaments, of a weight per metre of 0,12 g or more but not more than 3,75 g and of a length of 100 m or more, for the manufacture of carbon-fibre yarn (1)

    0 %

    m

    31.12.2018

    ex 5404 19 00

    20

    Monofilament of poly(1,4-dioxanone)

    0 %

    -

    31.12.2018

    ex 5404 19 00

    50

    Monofilaments of polyester or poly(butylene terephthalate), with cross-sectional dimension of 0,5 mm or more but not more than 1 mm, for use in the manufacture of zippers (1)

    0 %

    -

    31.12.2018

    ex 5404 90 90

    20

    Strip of polyimide

    0 %

    -

    31.12.2018

    ex 5407 10 00

    10

    Textile fabric, consisting of warp filament yarns of polyamide-6,6 and weft filament yarns of polyamide-6,6, polyurethane and a copolymer of terephthalic acid, p-phenylenediamine and 3,4′–oxybis (phenyleneamine)

    0 %

    -

    31.12.2017

    ex 5503 11 00

    ex 5601 30 00

    10

    40

    Synthetic staple fibres of a copolymer of terephthalic acid, p-phenylenediamine and 3,4′-oxybis(phenyleneamine), of a length of not more than 7 mm

    0 %

    -

    31.12.2018

    ex 5503 40 00

    10

    Hollow polypropylene staple fibres:

    — measuring 6 decitex or more but not more than 10 decitex,

    — of a strength of 3,5 cN/dtex or more

    — of a diameter of 30 μm or more

    for use in the manufacture of napkins and napkin liners for babies and other sanitary products (1)

    0 %

    -

    31.12.2016

    ex 5503 90 00

    ex 5506 90 00

    ex 5601 30 00

    20

    10

    10

    Poly(vinyl alcohol) fibres, whether or not acetalized

    0 %

    -

    31.12.2018

    ex 5503 90 00

    30

    Trilobal poly(thio-1,4-phenylene) fibres

    0 %

    -

    31.12.2019

    ex 5603 11 10

    ex 5603 11 90

    ex 5603 12 10

    ex 5603 12 90

    ex 5603 91 10

    ex 5603 91 90

    ex 5603 92 10

    ex 5603 92 90

    10

    10

    10

    10

    10

    10

    10

    10

    Poly(vinyl alcohol) non-wovens, in the piece or cut into rectangles:

    — of a thickness of 200 μm or more but not more than 280 μm and

    — of a weight of 20 g/m2 or more but not more than 50 g/m2

    0 %

    m2

    31.12.2018

    ex 5603 11 10

    ex 5603 11 90

    20

    20

    Non-wovens, not weighing more than 20 g/m2, containing spunbonded and meltblown filaments put together in a sandwich way with the two outer layers containing fine endless filaments (not less than 10 μm but not more than 20 μm in diameter) and the inner layer containing super-fine endless filaments (not less than 1 μm but not more than 5 μm in diameter), for the manufacture of napkins and napkin liners for babies and similar sanitary napkins (1)

    0 %

    m2

    31.12.2017

    ex 5603 12 90

    ex 5603 13 90

    ex 5603 14 90

    ex 5603 92 90

    ex 5603 93 90

    ex 5603 94 90

    30

    30

    10

    60

    40

    30

    Non-wovens of aromatic polyamide fibres obtained by polycondensation of m-phenylenediamine and isophthalic acid, in the piece or cut into rectangles

    0 %

    -

    31.12.2018

    ex 5603 12 90

    50

    Non-woven:

    — weighing 30 g/m2 or more, but not more than 60 g/m2,

    — containing fibres of polypropylene or of polypropylene and polyethylene,

    — whether or not printed, with:

    — on one side, 65 % of the total surface area having circular bobbles of 4mm in diameter, consisting of anchored, elevated un-bonded curly fibres, suitable for the engagement of extruded hook materials, and the remaining 35 % of the surface area being bonded,

    — and on other side a smooth untextured surface,

    for use in the manufacture of napkins and napkin liners for babies and similar sanitary articles (1)

    0 %

    m2

    31.12.2017

    ex 5603 12 90

    ex 5603 13 90

    60

    60

    Non-woven of spunbonded polyethylene, of a weight of more than 60 g/m2 but not more than 80 g/m2 and an air resistance (Gurley) of 8 seconds or more but not more than 36 seconds (as determined by the ISO 5636/5 method)

    0 %

    m2

    31.12.2018

    ex 5603 12 90

    ex 5603 13 90

    ex 5603 92 90

    ex 5603 93 90

    70

    70

    40

    10

    Non-wovens of polypropylene,

    — with a melt blown layer, laminated on each side with spunbonded filaments of polypropylene,

    — with a weight of not more than 150 g/m2,

    — in the piece or simply cut into squares or rectangles, and

    — not impregnated

    0 %

    m2

    31.12.2018

    ex 5603 13 10

    ex 5603 14 10

    10

    10

    Electrically nonconductive nonwovens, consisting of a central film of poly(ethylene terephthalate) laminated on each side with unidirectionally aligned fibres of poly(ethylene terephthalate), coated on both sides with high grade temperature resistant electrical nonconductive resin, weighing 147 g/m2 or more but not more than 265 g/m2, with non-isotropic tensile strength on both directions, to be used as electrical insulation material

    0 %

    m2

    31.12.2018

     (7)ex 5603 13 10

    20

    Non-woven of spunbonded polyethylene, with a coating,

    — of a weight of more than 80 g/m2 but not more than 105 g/m2 and

    — an air resistance (Gurley) of 8 seconds or more but not more than 75 seconds (as determined by the ISO 5636/5 method)

    0 %

    m2

    31.12.2020

    ex 5603 14 90

    40

    Non-wovens, consisting of poly(ethylene terephthlate) spun bonded media:

    — of weight of 160 g/m2 or more but not more than 300 g/m2,

    — whether or not laminated on one side with a membrane or a membrane and aluminium

    of a kind used for the manufacture of industrial filters

    0 %

    m2

    31.12.2018

    ex 5603 92 90

    ex 5603 93 90

    20

    20

    Non-wovens consisting of a meltblown central layer of a thermoplastic elastomer laminated on each side with spunbonded filaments of polypropylene

    0 %

    -

    31.12.2018

    ex 5603 92 90

    ex 5603 94 90

    70

    40

    Non-wovens, consisting of multiple layers of a mixture of meltblown fibres and staple fibres of polypropylene and polyester, whether or not laminated on one side or on both sides with spunbonded filaments of polypropylene

    0 %

    -

    31.12.2018

    ex 5603 92 90

    ex 5603 93 90

    80

    50

    Non-woven polyolefin fabric, consisting of an elastomeric layer, laminated on each side with polyolefin filaments:

    — a weight of 25 g/m2 or more but not more than 150 g/m2,

    — in the piece or simply cut into squares or rectangles,

    — not impregnated,

    — with cross-directional or machine-directional stretch properties

    for use in the manufacture of infant/child care products (1)

    0 %

    m2

    31.12.2016

    ex 5603 93 90

    60

    Nonwovens made of polyester fibres,

    — with a weight of 85 g/m2,

    — with a constant thickness of 95 μm (± 5 μm),

    — neither coated nor covered,

    — in 1 m wide rolls of 2 000 m to 5 000 m length,

    suitable for the coating of membranes in the manufacture of osmosis and reverse osmosis filters (1)

    0 %

    m2

    31.12.2018

    ex 5603 94 90

    20

    Acrylic fibre rods, having a length of not more than 50 cm, for the manufacture of pen tips (1)

    0 %

    -

    31.12.2018

    ex 5607 50 90

    10

    Unsterilised twine of poly(glycolic acid) or of poly(glycolic acid) and its copolymers with lactic acid, plaited or braided, with an inner core, for the manufacture of surgical sutures (1)

    0 %

    -

    31.12.2019

    ex 5803 00 10

    91

    Gauze of cotton, of a width of less than 1 500 mm

    0 %

    -

    31.12.2018

    ex 5903 10 90

    ex 5903 20 90

    ex 5903 90 99

    10

    10

    20

    Knitted or woven fabrics, coated or covered on one side with artificial plastic material in which are embedded microspheres

    0 %

    -

    31.12.2018

    ex 5906 99 90

    10

    Rubberised textile fabric, consisting of warp yarns of polyamide-6,6 and weft yarns of polyamide-6,6, polyurethane and a copolymer of terephthalic acid, p-phenylenediamine and 3,4′-oxybis(phenyleneamine)

    0 %

    -

    31.12.2018

    ex 5907 00 00

    10

    Textile fabrics, coated with adhesive in which are embedded spheres of a diameter of not more than 150 μm

    0 %

    -

    31.12.2016

    ex 5911 10 00

    10

    Needle-punched synthetic-fibre felts, not containing polyester, whether or not containing catalytic particles entrapped within the synthetic fibres, coated or covered on one side with polytetrafluoroethylene film, for the manufacture of filtration products (1)

    0 %

    -

    31.12.2018

    ex 5911 90 90

    ex 8421 99 00

    30

    92

    Parts of equipment for the purification of water by reverse osmosis, consisting essentially of plastic-based membranes, supported internally by woven or non-woven textile materials which are wound round a perforated tube, and enclosed in a cylindrical plastic casing of a wall-thickness of not more than 4 mm, whether or not housed in a cylinder of a wall-thickness of 5 mm or more

    0 %

    -

    31.12.2018

    ex 5911 90 90

    40

    Multi-layered non-woven polyester polishing pads, impregnated with polyurethane

    0 %

    -

    31.12.2019

    ex 6804 21 00

    10

    Discs

    — of synthetic diamonds which are agglomerated with a metal alloy, ceramic alloy or plastic alloy,

    — having a self-sharpening effect by constant release of the diamonds,

    — suitable for abrasive cutting of wafers,

    — whether or not containing a hole in the centre,

    — whether or not on a support

    0 %

    p/st

    31.12.2019

    ex 6813 89 00

    10

    Friction material, of a thickness of less than 20 mm, not mounted, for the manufacture of friction components of a kind used in automatic transmissions and clutches (1)

    0 %

    -

    31.12.2018

    ex 6814 10 00

    10

    Agglomerated mica with a thickness of not more than 0,15 mm, on rolls, whether or not calcined, whether or not reinforced with aramid fibres

    0 %

    -

    31.12.2018

    ex 6903 90 90

    20

    Silicon carbide reactor tubes and holders, of a kind used for insertion into diffusion and oxidation furnaces for production of semiconductor materials

    0 %

    -

    31.12.2018

    ex 6909 19 00

    15

    Ceramic ring with rectangular transversal section having an external diameter of 19 mm or more (+ 0,00 mm/- 0,10 mm) but not more than 29 mm (+ 0,00 mm/- 0,20 mm), an internal diameter of 10 mm or more (+ 0,00 mm/- 0,20 mm) but not more than 19 mm (+ 0,00 mm/-0,30 mm), a thickness variable from 2 mm (± 0,10 mm) to 3,70 mm (± 0,20 mm) and heat resistance 240 °C or more, containing by weight:

    — 90 % (± 1,5 %) of aluminium oxide

    — 7 % (± 1 %) of titanium oxide

    0 %

    p/st

    31.12.2017

     (7)ex 6909 19 00

    20

    Silicon nitride (Si3N4) rollers or balls

    0 %

    -

    31.12.2020

    ex 6909 19 00

    25

    Ceramic proppants, containing aluminium oxide, silicon oxide and iron oxide

    0 %

    -

    31.12.2018

    ex 6909 19 00

    30

    Supports for catalysts, consisting of porous cordierite or mullite ceramic pieces, of an overall volume of not more than 65 l, having, per cm2 of the cross-section, not less than one continuous channel which may be open at both ends or stopped at one end

    0 %

    -

    31.12.2018

    ex 6909 19 00

    ex 6914 90 00

    50

    20

    Ceramic articles made of continuous filaments of ceramic oxides, containing by weight:

    — 2 % or more of diboron trioxide,

    — 28 % or less of silicon dioxide, and

    — 60 % or more of dialuminium trioxide

    0 %

    -

    31.12.2018

    ex 6909 19 00

    60

    Supports for catalysts, consisting of porous ceramic pieces, of a blend of silicon carbide and silicon, with a hardness of less than 9 on the Mohs scale, with a total volume of not more than 65 litres, having, per cm2 of the surface of the cross section one or more closed channels at the tail end

    0 %

    -

    31.12.2018

    ex 6909 19 00

    70

    Supports for catalysts or filters, consisting of porous ceramics made primarily from oxides of aluminium and titanium; with a total volume of not more than 65 litres and at least one duct (open on one or both ends) per cm2 of cross section

    0 %

    -

    31.12.2018

    ex 6909 19 00

    80

    Ceramic heat sinks, containing by weight:

    — 66 % or more of silicon carbide,

    — 10 % or more of aluminium oxide

    for maintaining the operating temperature of transistors, diodes and integrated circuits in products of headings 8521 or 8528  (1)

    0 %

    p/st

    31.12.2016

    ex 6914 90 00

    30

    Ceramic microspheres, transparent, obtained from silicon dioxide and zirconium dioxide, of a diameter of more than 125 μm

    0 %

    -

    31.12.2018

     (7)ex 7004 90 80

    10

    Alkali-aluminosilicate drawn flat glass sheet with:

    — a scratch proof coating of a thickness of 45 micrometre (± 5 micrometre),

    — a total thickness of 0,45 mm or more but not more than 1,1 mm,

    — a width of 300 mm or more but not more than 3 210 mm,

    — a length of 300 mm or more but not more than 2 000 mm,

    — a visible light transmission of 90 % or more;

    — an optical distortion of 55° or more

    0 %

    -

    31.12.2020

    ex 7005 10 30

    10

    Float glass:

    — of a thickness of 4,0 mm or more but not more than 4,2 mm,

    — with a light transmission of 91 % or more measured using a D-type light source,

    — coated on one surface with a fluorine doped tin dioxide reflective layer

    0 %

    -

    31.12.2017

    ex 7006 00 90

    25

    Glass wafer made of borosilicate float glass

    — with a total thickness variation of 1 μm or less, and

    — laser-engraved

    0 %

    p/st

    31.12.2019

    ex 7006 00 90

    70

    Float glass:

    — with a thickness of 1,7 mm or more but not more than 1,9 mm,

    — with light transmission of 91 % or more, measured with a D-type light source,

    — coated on one side with fluorine-doped tin dioxide as a reflecting layer,

    — with worked edges

    0 %

    p/st

    31.12.2016

    ex 7007 19 20

    10

    Glass plate of a diagonal size of 81,28 cm (± 1,5 cm) or more, but not more than 185,42 cm (± 1,5 cm), consisting of tempered glass; provided either with a mesh film and a near-infrared absorbing film or a sputtered conductive layer, with optional additional anti-reflex layer on one or both sides, for use in the manufacture of products falling within heading 8528  (1)

    0 %

    -

    31.12.2018

    ex 7007 29 00

    10

    Glass plate of a diagonal size of 81,28 cm (± 1,5 cm) or more, but not more than 185,42 cm (± 1,5 cm), consisting of 2 sandwich plates laminated together; provided either with a mesh film and a near-infrared absorbing film or a sputtered conductive layer, with optional additional anti-reflex layer on one or both sides

    0 %

    -

    31.12.2018

    ex 7009 10 00

    10

    Electro-cromic auto-dimming glass for motor vehicle mirrors:

    — whether or not equipped with plastic backing plate,

    — whether or not equipped with a heating element,

    — whether or not equipped with Blind Spot Module (BSM) display

    0 %

    -

    31.12.2017

     (7)ex 7009 10 00

    30

    Layered glass with mechanical dimming ability by different angles of incident light comprising:

    — whether or not a layer of chrome,

    — a break-resistance adhesive tape or hot-melt adhesive, and

    — a release film on the front side and protective paper at the back side,

    of a kind used for interior rear-view mirrors of vehicles

    0 %

    p/st

    31.12.2019

     (7)ex 7009 91 00

    10

    Unframed glass mirrors with:

    — a length of 1 516 mm (± 1 mm);

    — a width of 553 mm (± 1 mm);

    — a thickness of 3 mm (± 0,1 mm);

    — the back of the mirror covered with protective polyethylene (PE) film, with a thickness of 0,11 mm or more but not more than 0,13 mm;

    — a lead content of not more than 90 mg/kg, and

    — a corrosion resistance of 72 hours or more according to ISO 9227 salt spray test

    0 %

    p/st

    31.12.2020

    7011 20 00

     

    Glass envelopes (including bulbs and tubes), open, and glass parts thereof, without fittings, for cathode ray tubes

    0 %

    p/st

    31.12.2018

    ex 7014 00 00

    10

    Optical elements of glass (other than those of heading 7015 ), not optically worked, other than signalling glassware

    0 %

    -

    31.12.2018

    ex 7019 12 00

    ex 7019 12 00

    01

    21

    Rovings, measuring 2 600 tex or more but not more than 3 300 tex and of a loss on ignition of 4 % or more but not more than 8 % by weight (as determined by the ASTM D 2584-94 method)

    0 %

    -

    31.12.2018

    ex 7019 12 00

    ex 7019 12 00

    02

    22

    Rovings, measuring 650 tex or more but not more than 2 500 tex, coated with a layer of polyurethane whether or not mixed with other materials

    0 %

    -

    31.12.2018

    ex 7019 12 00

    ex 7019 12 00

    03

    23

    Rovings, measuring 392 tex or more but not more than 2 884 tex, coated with a layer of an acrylic copolymer

    0 %

    -

    31.12.2018

    ex 7019 12 00

    ex 7019 12 00

    05

    25

    Rovings ranging from 1 980 to 2 033 tex, composed of continuous glass filaments of 9 μm (± 0,5 μm)

    0 %

    -

    31.12.2017

    ex 7019 19 10

    10

    Yarn of 33 tex or a multiple thereof (± 7,5 %), obtained from continuous spun-glass filaments of a nominal diameter of 3,5 μm or of 4,5 μm, in which filaments of a diameter of 3 μm or more but not more than 5,2 μm predominate, other than those treated so as to improve their adhesion to elastomers

    0 %

    -

    31.12.2018

    ex 7019 19 10

    15

    S-glass yarn of 33 tex or a multiple of 33 tex (± 13 %) made from continuous spun-glass filaments with fibres of a diameter of 9 μm (- 1 μm/+ 1,5 μm)

    0 %

    -

    31.12.2017

     (7)ex 7019 19 10

    20

    Yarn of 10,3 tex or more but not more than 11,9 tex, obtained from continuous spun-glass filaments, in which filaments of a diameter of 4,83 μm or more but not more than 5,83 μm predominate

    0 %

    -

    31.12.2020

     (7)ex 7019 19 10

    25

    Yarn of 5,1 tex or more but not more than 6,0 tex, obtained from continuous spun-glass filaments, in which filaments of a diameter of 4,83 μm or more but not more than 5,83 μm predominate

    0 %

    -

    31.12.2020

    ex 7019 19 10

    30

    Yarn of E-glass of 22 tex (± 1,6 tex), obtained from continuous spun-glass filaments of a nominal diameter of 7 μm, in which filaments of a diameter of 6,35 μm or more but not more than 7,61 μm predominate

    0 %

    -

    31.12.2019

    ex 7019 19 10

    50

    Yarn of 11 tex or a multiple thereof (± 7,5 %), obtained from continuous spun-glass filaments, containing 93 % by weight or more of silicon dioxide, of a nominal diameter of 6 μm or 9 μm, other than those treated

    0 %

    -

    31.12.2016

    ex 7019 19 10

    55

    Glass cord impregnated with rubber or plastic, obtained from K- or U-glass filaments, made up of:

    — 9 % or more but not more than 16 % of magnesium oxide,

    — 19 % or more but not more than 25 % of aluminium oxide,

    — 0 % or more but not more than 2 % of boron oxide,

    — without calcium oxide,

    coated with a latex comprising at least a resorcinol- formaldehyde resin and chlorosulphonated polyethylene

    0 %

    -

    31.12.2019

    ex 7019 19 10

    ex 7019 90 00

    60

    30

    High modulus glass cord (K) impregnated with rubber, obtained from twisted high modulus glass filament yarns, coated with a latex comprising a resorcinol-formaldehyde resin with or without vinylpyridine and/or hydrogenated acrylonitrile-butadiene rubber (HNBR)

    0 %

    -

    31.12.2018

    ex 7019 19 10

    ex 7019 90 00

    70

    20

    Glass cord impregnated with rubber or plastic, obtained from twisted glass filament yarns, coated with a latex comprising at least a resorcinol-formaldehyde-vinylpyridine resin and an acrylonitrile-butadiene rubber (NBR)

    0 %

    -

    31.12.2018

    ex 7019 19 10

    ex 7019 90 00

    80

    40

    Glass cord impregnated with rubber or plastic, obtained from twisted glass filament yarns, coated with a latex comprising at least a resorcinol-formaldehyde resin and chlorosulphonated polyethylene

    0 %

    -

    31.12.2018

    ex 7019 39 00

    50

    Non-woven product of non-textile glass fibre, for the manufacture of air filters or catalysts (1)

    0 %

    -

    31.12.2016

    ex 7019 40 00

    ex 7019 40 00

    11

    19

    Woven fabrics of rovings, impregnated with epoxy resin, with a coefficient of thermal expansion between 30 °C and 120 °C (measured according to IPC-TM-650) of:

    — 10ppm per °C or more but not more than 12ppm per °C in the length and width, and

    — 20ppm per °C or more but not more than 30ppm per °C in the thickness, with a glass transition temperature of 152 °C or more but not more than 153 °C (measured according IPC-TM-650)

    0 %

    -

    31.12.2018

    ex 7019 90 00

    10

    Non-textile glass fibres in which fibres of a diameter of less than 4,6 μm predominate

    0 %

    -

    31.12.2018

    ex 7020 00 10

    ex 7616 99 90

    10

    77

    Television pedestal stands with or without bracket for fixation to and stabilization of television cabinet case/body

    0 %

    p/st

    31.12.2016

     (7)ex 7201 10 11

    10

    Pig iron ingots with a length of not more than 350 mm, a width of not more than 150 mm, a height of not more than 150 mm

    0 %

    -

    31.12.2016

    ex 7201 10 30

    10

    Pig iron ingots with a length of not more than 350 mm, a width of not more than 150 mm, a height of not more than 150 mm, containing by weight not more than 1 % of silicon

    0 %

    -

    31.12.2016

    7202 50 00

     

    Ferro-silico-chromium

    0 %

    -

    31.12.2018

     (7)ex 7202 99 80

    10

    Ferro-dysprosium, containing by weight:

    — 78 % or more of dysprosium, and

    — 18 % or more but not more than 22 % of iron

    0 %

    -

    31.12.2020

    ex 7318 14 99

    ex 7318 14 99

    20

    29

    Rock bolt:

    — being a self-tapping screw,

    — with a length of more than 300 mm,

    of a kind used for support of mines

    0 %

    -

    31.12.2016

    ex 7320 90 10

    91

    Flat spiral spring of tempered steel, with:

    — a thickness of 2,67 mm or more, but not more than 4,11 mm,

    — a width of 12,57 mm or more, but not more than 16,01 mm,

    — a torque of 18,05 Nm or more, but not more than 73,5 Nm

    — an angle between the free position and the nominal position in exercise of 76° or more, but not more than 218°

    for use in the manufacture of tensioners for power transmission belts, for internal combustion engines (1)

    0 %

    p/st

    31.12.2018

    ex 7325 99 10

    20

    Anchor head of hot dipped galvanized ductile cast iron of the kind used in the production of earth anchors

    0 %

    p/st

    31.12.2019

    ex 7326 20 00

    20

    Metal fleece, consisting of a mass of stainless steel wires of diameters of 0,001 mm or more but not more than 0,070 mm, compacted by sintering and rolling

    0 %

    -

    31.12.2016

     (7)ex 7326 90 98

    40

    Iron and steel weights

    — whether or not with parts of other material

    — whether or not with parts of other metals

    — whether or not surface treated

    — whether or not printed

    of a kind used for the production of remote controls

    0 %

    -

    31.12.2020

    ex 7410 11 00

    ex 8507 90 80

    ex 8545 90 90

    10

    60

    30

    Roll of laminate foil of graphite and copper, with:

    — a width of 610 mm or more but not more than 620 mm, and

    — a diameter of 690 mm or more but not more than 710 mm,

    for use in the manufacture of lithium-ion electric vehicle batteries (1)

    0 %

    -

    31.12.2016

    ex 7410 21 00

    10

    Sheet or plate of polytetrafluoroethylene, containing aluminium oxide or titanium dioxide as filler or reinforced with glass-fibre fabric, covered on both sides with copper foil

    0 %

    -

    31.12.2018

    ex 7410 21 00

    30

    Film of polyimide, whether or not containing epoxide resin and/or glass fibre, covered on one side or on both sides with a copper foil

    0 %

    -

    31.12.2018

    ex 7410 21 00

    40

    Sheet or plates:

    — consisting of at least a central layer of paper or one central sheet of any type of nonwoven fibre, laminated on each side with glass-fibre fabric and impregnated with epoxide resin, or

    — consisting of multiple layers of paper, impregnated with phenolic resin,

    coated on one or both sides with a copper film with a maximum thickness of 0,15 mm

    0 %

    -

    31.12.2018

    ex 7410 21 00

    50

    Plates:

    — consisting of at least one layer of fibreglass fabric impregnated with epoxide resin,

    — covered on one or both sides with copper foilwith a thickness of not more than 0,15 mm, and

    — with a dielectric constant (DK) of less than 3,9 and a loss factor (Df) of less than 0,015 at a measuring frequency of 10GHz, as measured according to IPC-TM-650

    0 %

    -

    31.12.2018

    ex 7410 21 00

    60

    Plates, rolls and sheets of synthetic or artificial resin:

    — with a maximum thickness of not more than 25μm,

    — coated on both sides with a copper film with a maximum thickness of 0,15 mm,

    — with a minimum capacitance of 1,09pF/mm2,

    for use in the manufacture of circuit boards (1)

    0 %

    -

    31.12.2018

    ex 7410 21 00

    70

    Plates, rolls or sheets:

    — with at least one layer of woven glass fibre, impregnated with a fire-retardant artificial or synthetic resin with a glass transition temperature (Tg) of more than 170 °C (according to IPC-TM-650, method 2.4.25),

    — coated on one or both sides with a copper film with a thickness of not more than 0,15 mm,

    for use in the manufacture of circuit boards (1)

    0 %

    -

    31.12.2018

    ex 7419 99 90

    ex 7616 99 90

    91

    60

    Disc (target) with deposition material, consisting of molybdenum silicide:

    — containing 1mg/kg or less of sodium, and

    — mounted on a copper or aluminium support

    0 %

    -

    31.12.2018

    7601 20 20

     

    Slabs and billets of unwrought aluminium alloys

    4%

    -

    31.12.2018

    ex 7601 20 20

    10

    Slabs and billets of aluminium alloy containing lithium

    0 %

    -

    31.12.2017

    ex 7604 21 00

    ex 7604 29 90

    10

    30

    Profiles made of aluminium alloy conforming to EN standard AW-6063 T5

    — anodized

    — whether or not lacquered

    — with a wall thickness of 0,5 mm (± 1,2 %) or more but not more than 0,8 mm (± 1,2 %)

    for use in the manufacture of goods of heading 8302  (1)

    0 %

    p/st

    31.12.2018

     (7)ex 7604 29 10

    ex 7606 12 99

    10

    20

    Sheets and bars of aluminium-lithium alloys

    0 %

    -

    31.12.2020

    ex 7604 29 10

    40

    Bars and rods of aluminium alloys containing by weight:

    — 0,25 % or more but not more than 7 % of zinc, and

    — 1 % or more but not more than 3 % of magnesium, and

    — 1 % or more but not more than 5 % of copper, and

    — not more than 1 % of manganese

    consistent with the material specifications AMS QQ-A-225, of a kind used in aerospace industry (inter alia conforming NADCAP and AS9100) and obtained by rolling mill process

    0 %

    -

    31.12.2019

    ex 7605 19 00

    10

    Not alloyed aluminium wire, of a diameter of 2 mm or more but not more than 6 mm, covered with a layer of copper of a thickness of 0,032 mm or more but not more than 0,117 mm

    0 %

    -

    31.12.2018

    ex 7605 29 00

    10

    Wire of aluminium alloys containing by weight:

    — 0,10 % or more but not more than 5 % of copper, and

    — 0,2 % or more but not more than 6 % of magnesium, and

    — 0,10 % or more but not more than 7 % of zinc, and

    — not more than 1 % of manganese

    consistent with the material specifications AMS QQ-A-430, of a kind used in aerospace industry (inter alia conforming NADCAP and AS9100) and obtained by rolling mill process

    0 %

    m

    31.12.2019

     (7)ex 7606 12 92

    40

    Cold rolled sheets of aluminium alloy conforming to EN standard AW-3104 H19

    — of a thickness of 0,245 mm or more but not more than 0,280 mm,

    — of a width of 1 589 mm or more but not more than 1 736 mm,

    for use in the manufacture of beverage cans (1)

    0 %

    -

    31.12.2020

    ex 7607 11 90

    40

    Aluminium foil in rolls:

    — having a purity of 99,99 % by weight,

    — of a thickness of 0,021 mm or more but not more than 0,2 mm,

    — with a width of 500 mm,

    — with a surface oxide layer by 3 to 4 nm thick,

    — and with a cubic texture of more than 95 %

    0 %

    -

    31.12.2016

    ex 7607 11 90

    60

    Plain aluminium foil with the following parameters:

    — an aluminium content of 99,98 % or more

    — a thickness of 0,070 mm or more but not more than 0,125 mm

    — with a cubic texture

    of a kind used for high voltage etching

    0 %

    -

    31.12.2016

    ex 7607 19 90

    ex 8507 90 80

    10

    80

    Sheet in the form of a roll consisting of a laminate of lithium and manganese bonded to aluminium, with:

    — a width of 595 mm or more but not more than 605 mm, and

    — a diameter of 690 mm or more but not more than 710 mm,

    for use in the manufacture of cathodes for lithium-ion electric vehicle batteries (1)

    0 %

    -

    31.12.2016

    ex 7607 20 90

    10

    Aluminium laminated film of a total thickness of not more than 0,123 mm, comprising of a layer of aluminium of a thickness of not more than 0,040 mm, polyamide and polypropylene base films, and a protective coating against corrosion by hydrofluoric acid, for use in the manufacture of lithium polymer batteries (1)

    0 %

    -

    31.12.2017

    ex 7608 20 89

    30

    Seamless aluminium alloyed extruded tubes with:

    — an outer diameter of 60 mm or more but not more than 420 mm, and

    — a wall thickness of 10 mm or more but not more than 80 mm

    0 %

    -

    31.12.2018

    ex 7613 00 00

    20

    Aluminium container, seamless, for compressed natural gas or compressed hydrogen, wholly embedded in an overwrap of epoxy-carbon fibres composite, of a storage capacity of 172 l (± 10 %) and an unfilled weight of not more than 64 kg

    0 %

    p/st

    31.12.2018

    ex 7616 99 10

    30

    Aluminium engine bracket, with dimensions of:

    — height of more than 10 mm but not more than 200 mm

    — width of more than 10 mm but not more than 200 mm

    — length of more than 10 mm but not more than 200 mm

    equipped with at least two fixing holes, made of aluminium alloys ENAC-46100 or ENAC-42100 (based on the norm EN:1706) with following characteristics:

    — internal porosity not more than 1 mm;

    — outer porosity not more than 2 mm;

    — Rockwell hardness HRB 10 or more

    of a kind used in the production of suspensions systems for engines in motor vehicles

    0 %

    p/st

    31.12.2019

    ex 7616 99 90

    15

    Honeycomb aluminium blocks of the type used in the manufacture of aircraft parts

    0 %

    p/st

    31.12.2018

    ex 7616 99 90

    ex 8482 80 00

    ex 8803 30 00

    70

    10

    40

    Connecting components for use in the production of helicopter tail rotor shafts (1)

    0 %

    p/st

    31.12.2016

    ex 7616 99 90

    75

    Parts in the shape of a rectangular frame:

    — of painted aluminium,

    — with a length of 1 011 mm or more but not more than 1 500 mm,

    — with a width of 622 mm or more but not more than 900 mm,

    — with a thickness of 0,6 mm (± 0,1 mm),

    of a kind used in the manufacture of TV sets

    0 %

    p/st

    31.12.2017

     (7)ex 8101 96 00

    10

    Tungsten wire containing by weight 99 % or more of tungsten with:

    — a maximum cross-sectional dimension of not more than 50 μm

    — a resistance of 40 Ohm or more but not more than 300 Ohm at length of 1 metre

    of a kind used in the production of heated car front windows

    0 %

    -

    31.12.2020

    ex 8102 10 00

    10

    Molybdenum powder with:

    — a purity by weight of 99 % or more, and

    — a particle size of 1,0 μm or more, but not more than 5,0 μm

    0 %

    -

    31.12.2017

    ex 8103 90 90

    10

    Tantalum sputtering target with:

    — a copper-chromium alloy backing plate,

    — a diameter of 312 mm, and

    — a thickness of 6,3 mm

    0 %

    p/st

    31.12.2019

    8104 11 00

     

    Unwrought magnesium, containing at least 99,8 % by weight of magnesium

    0 %

    -

    31.12.2018

     (7)ex 8104 30 00

    35

    Magnesium powder

    — of purity by weight of more than 99,5 %

    — with a particle size of 0,2 mm or more but not more than 0,8 mm

    0 %

    -

    31.12.2020

    ex 8104 90 00

    10

    Ground and polished magnesium sheets, of dimensions not more than 1 500 mm × 2 000 mm, coated on one side with an epoxy resin insensitive to light

    0 %

    -

    31.12.2018

    ex 8105 90 00

    10

    Bars or wires made of cobalt alloy containing, by weight:

    — 35 % (± 2 %) cobalt,

    — 25 % (± 1 %) nickel,

    — 19 % (± 1 %) chromium, and

    — 7 % (± 2 %) iron

    conforming to the material specifications AMS 5842, of a kind used in the aerospace industry

    0 %

    -

    31.12.2017

    ex 8108 20 00

    10

    Titanium sponge

    0 %

    -

    31.12.2018

    ex 8108 20 00

    30

    Titanium powder of which 90 % by weight or more passes through a sieve with an aperture of 0,224 mm

    0 %

    -

    31.12.2018

    ex 8108 30 00

    10

    Waste and scrap of titanium and titanium alloys, except those containing by weight 1 % or more but not more than 2 % of aluminium

    0 %

    -

    31.12.2018

    ex 8108 90 30

    10

    Titanium alloy rods complying with standard EN 2002-1, EN 4267 or DIN 65040

    0 %

    -

    31.12.2019

    ex 8108 90 30

    20

    Bars, rods and wire of alloy of titanium and aluminium, containing by weight 1 % or more but not more than 2 % of aluminium, for use in the manufacture of silencers and exhaust pipes of subheadings 8708 92 or 8714 10 00  (1)

    0 %

    -

    31.12.2017

    ex 8108 90 30

    40

    Wire of an titanium alloy containing by weight:

    — 22 % (± 3 %) of vanadium, and

    — 4 % (± 0,5 %) of aluminium

    0 %

    -

    31.12.2016

     (7)ex 8108 90 30

    50

    Titanium-aluminium-vanadium alloy (TiAl6V4) wire, complying with AMS standards 4928, 4965 and 4967

    0 %

    -

    31.12.2020

    ex 8108 90 50

    10

    Alloy of titanium and aluminium, containing by weight 1 % or more but not more than 2 % of aluminium, in sheets or rolls, of a thickness of 0,49 mm or more but not more than 3,1 mm, of a width of 1 000 mm or more but not more than 1 254 mm, for the manufacture of goods of subheading 8714 10 00  (1)

    0 %

    -

    31.12.2018

    ex 8108 90 50

    15

    Alloy of titanium, copper, tin, silicon, and niobium containing by weight:

    — 0,8 % or more but not more than 1,2 % of copper,

    — 0,9 % or more but not more than 1,15 % of tin,

    — 0,25 % or more but not more than 0,45 % of silicon, and

    — 0,2 % or more but not more than 0,35 % of niobium,

    in sheets, plates, strips or foil

    0 %

    -

    31.12.2019

    ex 8108 90 50

    30

    Alloy of titanium and silicon, containing by weight 0,15 % or more but not more than 0,60 % of silicon, in sheets or rolls, for use in the manufacture of:

    — exhaust systems for internal combustion engines, or

    — tubes and pipes of subheading 8108 90 60  (1)

    0 %

    -

    31.12.2017

    ex 8108 90 50

    50

    Plates, sheets, strips and foils of an alloy of titanium, copper and niobium, containing by weight 0,8 % or more but not more than 1,2 % of copper and 0,4 % or more but not more than 0,6 % of niobium

    0 %

    -

    31.12.2017

    ex 8108 90 50

    60

    Plates, sheets, strips and foils of an alloy of titanium, aluminium, silicon and niobium, containing by weight:

    — 0,4 % or more but not more than 0,6 % of aluminium,

    — 0,35 % or more but not more than 0,55 % of silicon, and

    — 0,1 % or more but not more than 0,3 % of niobium

    0 %

    -

    31.12.2018

    ex 8108 90 50

    70

    Strip of an alloy of titanium, containing by weight:

    — 15 % (± 1 %) of vanadium

    — 3 % (± 0,5 %) of chromium

    — 3 % (± 0,5 %) of tin and

    — 3 % (± 0,5 %) of aluminium

    0 %

    -

    31.12.2016

    ex 8108 90 50

    75

    Plates, sheets, strips and foil of titanium alloy, containing by weight:

    — 0,3 % or more but not more than 0,7 % of aluminium, and

    — 0,25 % or more but not more than 0,6 % of silicon

    0 %

    -

    31.12.2016

     (7)ex 8108 90 50

    80

    Plates, sheets, strips and foil of non-alloyed titanium

    — of a width of more than 750 mm

    — of a thickness of not more than 3 mm

    0 %

    -

    31.12.2019

    ex 8108 90 50

    85

    Strip or foil of non-alloyed titanium:

    — containing more than 0,07 % by weight of oxygen (O2),

    — of a thickness of 0,4 mm or more but not more than 2,5 mm

    — conforming to the Vickers hardness HV1 standard of not more than 170

    of a kind used in the manufacture of welded tubes for nuclear power plant condensers

    0 %

    -

    31.12.2019

    ex 8108 90 90

    ex 9003 90 00

    20

    10

    Parts of spectacle frames and mountings, including bolts of the kind used for spectacle frames and mountings, of an alloy of titanium

    0 %

    p/st

    31.12.2016

    ex 8109 20 00

    10

    Non-alloy zirconium sponges or ingots, containing by weight more than 0,01 % of hafnium for use in the manufacture of tubes, bars or ingots enlarged by remelting for the chemical industry (1)

    0 %

    -

    31.12.2018

    ex 8110 10 00

    10

    Antimony in the form of ingots

    0 %

    -

    31.12.2018

    ex 8112 99 30

    10

    Alloy of niobium (columbium) and titanium, in the form of bars and rods

    0 %

    -

    31.12.2018

    ex 8113 00 20

    10

    Cermet blocks containing by weight 60 % or more of aluminium and 5 % or more of boron carbide

    0 %

    -

    31.12.2016

    ex 8113 00 90

    10

    Carrier plate of aluminium silicon carbide (AlSiC-9) for electronic circuits

    0 %

    -

    31.12.2017

    ex 8207 19 10

    10

    Inserts for drilling tools with working parts of agglomerated diamonds

    0 %

    p/st

    31.12.2019

    ex 8207 30 10

    10

    Set of transfer and/or tandem press tools for cold-forming, pressing, drawing, cutting, punching, bending, calibrating, bordering and throating of metal sheets, for use in the manufacture of frame parts of motor vehicles (1)

    0 %

    p/st

    31.12.2017

     (7)ex 8301 60 00

    ex 8413 91 00

    ex 8419 90 85

    ex 8438 90 00

    ex 8468 90 00

    ex 8476 90 00

    ex 8479 90 80

    ex 8481 90 00

    ex 8503 00 99

    ex 8515 90 00

    ex 8531 90 85

    ex 8536 90 85

    ex 8537 10 99

    ex 8543 90 00

    ex 8708 91 99

    ex 8708 99 97

    ex 9031 90 85

    20

    40

    30

    20

    20

    20

    83

    30

    70

    30

    30

    95

    70

    70

    20

    40

    40

    Keypads of silicone or plastic,

    — whether or not with parts of metal, plastic, glass fibre reinforced epoxide resin or wood

    — whether or not printed or surface treated

    — whether or not with electrical conducting elements

    — whether or not with keypads foil glued on the keyboard

    — whether or not with protective foil

    — single or multilayer

    0 %

    p/st

    31.12.2020

    ex 8309 90 90

    10

    Aluminium can ends:

    — with a diameter of 99,00 mm or more but not more than 136,5 mm (± 1mm),

    — whether or not with a ‘ring-pull’ aperture

    0 %

    p/st

    31.12.2018

    ex 8401 30 00

    20

    Non-irradiated hexagonal fuel modules (elements) for use in nuclear reactors (1)

    0 %

    -

    31.12.2018

    ex 8401 40 00

    10

    Stainless steel absorber control rods, filled with neutron absorbing chemical elements

    0 %

    p/st

    31.12.2019

    ex 8405 90 00

    ex 8708 21 10

    ex 8708 21 90

    10

    10

    10

    Metal casing for automobile safety belt pre-tension gas generators

    0 %

    p/st

    31.12.2019

    ex 8407 33 20

    ex 8407 33 80

    ex 8407 90 80

    ex 8407 90 90

    10

    10

    10

    10

    Spark-ignition reciprocating or rotary internal combustion piston engines, having a cylinder capacity of not less than 300 cm3 and a power of not less than 6 kW but not exceeding 20,0 kW, for the manufacture of:

    — self-propelled lawn mowers, with a seat of subheading 8433 11 51 , and hand-operated lawn mowers of heading 8433 11 90 ,

    — tractors of subheading 8701 90 11 , whose main function is that of a lawn mower,

    — four stroke mowers with motor of a cylinder capacity of not less than 300 cc of subheading 8433 20 10 , or

    — snowploughs and snow blowers of subheading 8430 20  (1)

    0 %

    -

    31.12.2017

    ex 8407 90 10

    10

    Four-stroke petrol engines of a cylinder capacity of not more than 250 cm3 for use in the manufacture of lawnmowers of subheading 8433 11 , mowers with motor of subheading 8433 20 10 , rotovators of subheading 8432 29 50 , garden shredders of subheading 8436 80 90 or scarifiers of subheading 8432 29 10  (1)

    0 %

    -

    31.12.2016

     (7)ex 8407 90 90

    20

    Compact Liquid Petroleum Gas (LPG) Engine System, with:

    — 6 cylinders,

    — an output of 75 kW or more, but not more than 80 kW,

    — inlet and exhaust valves modified to operate continuously in heavy duty applications,

    for use in the manufacture of vehicles of heading 8427  (1)

    0 %

    -

    31.12.2020

    ex 8408 90 41

    20

    Diesel engines of a power of not more than 15 kW, with 2 or 3 cylinders, for use in the manufacture of vehicle mounted temperature control systems (1)

    0 %

    -

    31.12.2018

    ex 8408 90 43

    20

    Diesel engines of a power of not more than 30 kW, with 4 cylinders, for use in the manufacture of vehicle mounted temperature control systems (1)

    0 %

    -

    31.12.2018

    ex 8408 90 43

    ex 8408 90 45

    ex 8408 90 47

    30

    20

    30

    4 Cylinder, 4 cycle, liquid cooled, compression-ignition engine having:

    — a capacity of not more than 3 850 cm3, and

    — a rated output of 15 kW or more but not more than 55 kW,

    for use in the manufacture of vehicles of heading 8427  (1)

    0 %

    -

    31.12.2017

    ex 8408 90 47

    40

    4 Cylinder, 4 cycle, liquid cooled, compression-ignition engine having:

    — a capacity of not more than 3 850 cm3,

    — a rated output of 55 kW or more but not more than 85 kW,

    for use in the manufacture of vehicles of heading 8427  (1)

    0 %

    -

    31.12.2018

    ex 8409 91 00

    ex 8409 99 00

    10

    20

    Exhaust manifold complying with standard DIN EN 13835, whether or not with turbine housing, with four inlet ports, for use in the manufacture of exhaust manifold that is turned, milled, drilled and/or processed by other means (1)

    0 %

    p/st

    31.12.2016

    ex 8409 99 00

    ex 8479 90 80

    10

    85

    Injectors with solenoid valve for optimised atomisation in the engine combustion chamber

    0 %

    p/st

    31.12.2016

    ex 8409 99 00

    ex 8411 99 00

    30

    70

    Spiral-shaped gas turbine turbocharger component:

    — with a heat-resistance of not more than 1 050 °C,

    — with a turbine wheel hole diameter of 30 mm or more, but not more than 110 mm,

    — whether or not with an engine exhaust manifold

    0 %

    p/st

    31.12.2018

    ex 8411 99 00

    60

    Wheel-shaped gas turbine component with blades, of a kind used in turbochargers:

    — of a precision-cast nickel based alloy complying with standard DIN G- NiCr13Al6MoNb or DIN G- NiCr13Al16MoNb or DIN NiCo10W10Cr9AlTi or AMS AISI:686,

    — with a heat-resistance of not more than 1 100 °C;

    — with a diameter of 30 mm or more, but not more than 100 mm;

    — with a height of 20 mm or more, but not more than 70 mm

    0 %

    p/st

    31.12.2017

     (7)ex 8411 99 00

    80

    Actuator for a single-stage turbocharger:

    — whether or not with conducting horns and connecting sleeves, having an operating distance of 20 mm or more but not more than 40 mm,

    — with a length of not more than 350 mm,

    — with a diameter of not more than 75 mm,

    — with a height of not more than 110 mm

    0 %

    p/st

    31.12.2018

     (7)ex 8413 70 35

    20

    Single phase centrifugal pump:

    — discharging at least 400 cm3 fluid per minute,

    — with a noise level limited to 6 dBA,

    — with the inside diameter of the suction opening and discharge outlet of not more than 15 mm, and

    — working at ambient temperatures down to - 10 °C

    0 %

    -

    31.12.2020

    ex 8413 91 00

    30

    Fuel pump cover:

    — consisting of aluminum alloys,

    — with a diameter of 38 mm or 50 mm,

    — with two concentric, annular grooves formed on its surface,

    — anodized,

    of a kind used in motor vehicles with petrol engines

    0 %

    p/st

    31.12.2019

    ex 8414 30 81

    50

    Hermetic or semi-hermetic variable-speed electric scroll compressors, with a nominal power rating of 0,5 kW or more but not more than 10 kW, with a displacement volume of not more than 35 cm3, of the type used in refrigeration equipment

    0 %

    -

    31.12.2019

    ex 8414 30 81

    ex 8414 80 73

    60

    30

    Hermetic rotary compressors for Hydro-Fluoro-Carbon (HFC) refrigerants:

    — driven by ‘on-off’ single phase alternate current' (AC) or ‘brushless direct current’ (BLDC) variable speed motors

    — with a nominal power rating of not more than 1,5 kW

    of a kind used in the production of household heat pump laundry tumble dryers

    0 %

    -

    31.12.2018

    ex 8414 30 89

    20

    Vehicle air conditioning system part, consisting of an open shaft reciprocating compressor of a power of more than 0,4 kW but not more than 10 kW

    0 %

    -

    31.12.2018

    ex 8414 59 20

    30

    Axial fan:

    — with an electric motor,

    — of an output of not more than 125 W

    for use in the manufacture of computers (1)

    0 %

    -

    31.12.2018

     (7)ex 8414 59 20

    40

    Axial fan with an electric motor, of an output of not more than 2 W, for use in the manufacture of products of heading 8521 or 8528  (1)

    0 %

    -

    31.12.2020

    ex 8414 59 80

    ex 8414 90 00

    40

    60

    Cross-flow fan with:

    — a height of 575 mm (± 1,0 mm) or more, but not more than 850 mm (± 1,0 mm),

    — a diameter of 95mm (± 0,6 mm) or 102 mm (± 0,6 mm),

    — an anti-static, anti-bacterial and heat-resistant, 30 % glass fibre reinforced plastic raw material that has a minimum temperature resistance of 70 °C (± 5 °C),

    for use in the manufacture of indoor units of split-type air conditioning machines (1)

    0 %

    p/st

    31.12.2016

    ex 8414 90 00

    20

    Aluminium pistons, for incorporation into compressors of air conditioning machines of motor vehicles (1)

    0 %

    p/st

    31.12.2019

    ex 8414 90 00

    30

    Pressure-regulating system, for incorporation into compressors of air conditioning machines of motor vehicles (1)

    0 %

    p/st

    31.12.2018

    ex 8414 90 00

    40

    Drive part, for compressors of air conditioning machines of motor vehicles (1)

    0 %

    p/st

    31.12.2018

    ex 8415 90 00

    20

    Evaporator made of aluminium for use in the manufacture of air conditioning machines for automobiles (1)

    0 %

    p/st

    31.12.2016

    ex 8418 99 10

    50

    Evaporator composed of aluminium fins and a copper coil of the kind used in refrigeration equipment

    0 %

    p/st

    31.12.2019

    ex 8418 99 10

    60

    Condenser composed of two concentric copper tubes of the kind used in refrigeration equipment

    0 %

    p/st

    31.12.2019

    ex 8421 21 00

    20

    Water pre-treatment system comprising one or more of the following elements, whether or not incorporating modules for sterilization and sanitization of these elements:

    — ultrafiltration system

    — carbon filtration system

    — water softener system

    for use in a biopharmaceutical laboratory

    0 %

    p/st

    31.12.2019

     (7)ex 8421 29 00

    ex 8479 82 00

    ex 8479 89 97

    20

    10

    75

    Equipment for use in the manufacture of biopharmaceutical products comprising any of the following whether or not with associated vessels or tanks:

    — Ultrafiltration-diafiltration unit;

    — Automated control, testing and monitoring equipment for Clean in Process (CIP) and Sterilise in Place (SIP) activities;

    — Process vessels and tanks (1)

    0 %

    p/st

    31.12.2016

    ex 8421 99 00

    91

    Parts of equipment, for the purification of water by reverse osmosis, consisting of a bundle of hollow fibres of artificial plastic material with permeable walls, embedded in a block of artificial plastic material at one end and passing through a block of artificial plastic material at the other end, whether or not housed in a cylinder

    0 %

    p/st

    31.12.2018

    ex 8421 99 00

    93

    Components of separators for the separation or purification of gases from gas mixtures, consisting of a bundle of permeable hollow fibres enclosed within a container, whether or not perforated, of an overall length of 300 mm or more but not more than 3 700 mm and a diameter of not more than 500 mm

    0 %

    p/st

    31.12.2018

    ex 8422 30 00

    ex 8479 89 97

    10

    30

    Machines and apparatus, other than injection moulding machines, for the manufacture of ink-jet printer cartridges (1)

    0 %

    p/st

    31.12.2018

    ex 8424 90 00

    30

    Containers of poly(ethylene terephthalate), with a content of 50 ml or more but not more than 600 ml, equipped with a nozzle, of a kind used as a part of mechanical appliances for spraying liquids

    0 %

    p/st

    31.12.2018

    ex 8431 20 00

    30

    Drive axle assembly containing differential, reduction gears, crown wheel, drive shafts, wheel hubs, brakes and mast mounting arms for use in the manufacture of vehicles in heading 8427  (1)

    0 %

    p/st

    31.12.2017

    ex 8431 20 00

    40

    Aluminium core, plastic tank radiator, with integral steel support structure and an open core square wave design of 9 fins per 2,54 cm of core length for use in the manufacture of vehicles of heading 8427  (1)

    0 %

    p/st

    31.12.2018

    ex 8439 99 00

    10

    Suction-roll shells, produced by centrifugal casting, not drilled, in the form of alloy-steel tubes, of a length of 3 000 mm or more and an external diameter of 550 mm or more

    0 %

    p/st

    31.12.2018

    ex 8467 99 00

    ex 8536 50 11

    10

    35

    Mechanical switches for connecting electrical circuits, with:

    — a voltage of 14,4 V or more but not more than 42 V,

    — an amperage of 10 A or more but not more than 42 A,

    for use in the manufacture of machines falling within heading 8467  (1)

    0 %

    p/st

    31.12.2019

    ex 8475 29 00

    ex 8514 10 80

    10

    10

    Glass Filament Melter with heater basket/bushing assembly:

    — electrically heated

    — with opening

    — with a multiplicity of tips (holes) of platinum/rhodium alloy

    — used to melt glass batches and condition molten glass

    — for drawing into continuous fibres

    0 %

    p/st

    31.12.2018

    ex 8477 80 99

    10

    Machines for casting or for surface modification of plastic membranes of heading 3921

    0 %

    p/st

    31.12.2018

     (7)ex 8479 89 97

    ex 8479 90 80

    50

    80

    Machinery, being components of a production line for the manufacture of lithium ion batteries for passenger electric motor vehicles, for the construction of such a production line (1)

    0 %

    p/st

    31.12.2020

    ex 8479 89 97

    60

    Bioreactor for biopharmaceutical cell culture (having interior surfaces of type 316L austenitic stainless steel) with a process capacity of 50 litres, 500 litres, 3 000 litres or 10 000 litres, whether or not combined with a ‘clean-in-process’ system

    0 %

    p/st

    31.12.2019

    ex 8479 89 97

    70

    Machine to accurately align and attach lenses into a camera assembly in five axis alignment capability and fix them in position with a two part cure epoxy

    0 %

    p/st

    31.12.2019

    ex 8479 89 97

    80

    Machinery for the production of a sub assembled component (anode conductor and the negative closing cap) for the manufacture of AA and/or AAA alkaline batteries (1)

    0 %

    p/st

    31.12.2019

     (7)ex 8479 89 97

    85

    High Pressure Hard Materials Compression Press (‘Link Press’):

    — with a 16 000 tonne pressure rating,

    — with a 1 100 mm diameter Bolster (± 1mm),

    — with a 1 400 mm main cylinder (± 1mm),

    — with a Fixed and floating link frame, multiple pump high pressure hydraulic accumulator and pressure system,

    — with a double arm manipulator arrangement and connections for piping and electrical systems,

    — with a total weight 310 tonnes (± 10 tonnes), and

    — creating 30 000 atmospheres at 1 500 degrees centigrade using Low Frequency Alternating Current (16 000 amps)

    0 %

    p/st

    31.12.2020

    ex 8481 30 91

    91

    Steel check (non-return) valves with:

    — an opening pressure of not more than 800 kPa,

    — an external diameter not more than 37 mm

    0 %

    p/st

    31.12.2019

    ex 8481 80 59

    10

    Air control valve, consisting of a stepping motor and a valve pintle, for the regulation of idle air flow in fuel injection engines

    0 %

    p/st

    31.12.2018

    ex 8481 80 69

    60

    Four-way reversing valve for refrigerants, consisting of:

    — a solenoid pilot valve

    — a brass valve body including valve slider and copper connections

    with a working pressure up to 4,5 MPa

    0 %

    p/st

    31.12.2017

    ex 8481 80 79

    20

    Solenoid valve device that can withstand a pressure of 875 bar

    0 %

    p/st

    31.12.2018

    ex 8481 80 99

    50

    Service valve, consisting a combination of a two way valve on the liquid line and a three way valve on the gas line with:

    — a minimum enclosing pressure of 30 kgf/cm2,

    — a minimum withstanding pressure of 45 kgf/cm2,

    for use in the manufacture of outdoor air conditioning units (1)

    0 %

    p/st

    31.12.2016

    ex 8481 80 99

    60

    Four way valve, consisting of:

    — a core plunger,

    — a sealing plunger,

    — a 220 V-240 V AC 50/60 Hz solenoid coil,

    — a working pressure up to 4,3 MPa,

    — a housing

    for directing the flow of the refrigerant, for use in the manufacture of outdoor air conditioning units (1)

    0 %

    p/st

    31.12.2016

    ex 8482 10 10

    ex 8482 10 90

    ex 8482 50 00

    10

    10

    10

    Ball and cylindrical bearings:

    — with an outside diameter of 28 mm or more but not more than 140 mm,

    — with an operational thermal stress of more than 150 °C at a working pressure of not more than 14 MPa,

    for the manufacture of machinery for the protection and control of nuclear reactors in nuclear power plants (1)

    0 %

    p/st

    31.12.2019

    ex 8482 10 10

    20

    Ball bearings:

    — with an internal diameter of 10 mm or more,

    — with an external diameter of not more than 30 mm,

    — with a width of not more than 10 mm,

    — whether or not equipped with a duster,

    for use in the manufacture of belt drive steering systems of motor (1)

    0 %

    p/st

    31.12.2019

    ex 8483 30 38

    40

    Cylindrical bearing housing:

    — of precision-cast grey cast iron complying with standard DIN EN 1561,

    — with oil chambers,

    — without bearings,

    — with a diameter of 50 mm or more, but not more than 250 mm,

    — with a height of 40 mm or more, but not more than 150 mm,

    — whether or not with water chambers and connectors

    0 %

    p/st

    31.12.2017

    ex 8483 40 29

    50

    Gear set of cycloid gear type with:

    — a rated torque of 50 Nm or more but not more than 7 000 Nm,

    — standard ratios of 1:50 or more but not more than 1:270,

    — lost motion of not more than one arc minute,

    — an efficiency of more than 80 %,

    of a kind used in robot arms

    0 %

    p/st

    31.12.2016

    ex 8483 40 29

    60

    Epicyclic gearing, of a kind used in driving hand-held power tools with:

    — a rated torque of 25 Nm or more, but not more than 70 Nm,

    — standard gear ratios of 1:12,7 or more, but not more than 1:64,3

    0 %

    p/st

    31.12.2018

    ex 8483 40 51

    20

    Gear box, having a differential with wheel axle, for use in the manufacture of self-propelled lawnmowers with a seat of subheading 8433 11 51  (1)

    0 %

    p/st

    31.12.2018

    ex 8483 40 59

    20

    Hydrostatic speed changer, having a hydro pump and a differential with wheel axle, for use in the manufacture of self-propelled lawnmowers with a seat of subheading 8433 11 51  (1)

    0 %

    p/st

    31.12.2018

     (7)ex 8483 40 90

    80

    Transmission gearbox, with:

    — not more than 3 gears,

    — an automatic deceleration system, and

    — a power reversal system,

    for use in the manufacture of goods of heading 8427  (1)

    0 %

    p/st

    31.12.2020

    ex 8501 10 99

    54

    DC motor, brushless, with an external diameter of not more than 25,4 mm, a rated speed of 2 260 (± 15 %) rpm or 5 420 (± 15 %) rpm, a supply voltage of 1,5 V or 3 V

    0 %

    -

    31.12.2018

    ex 8501 10 99

    60

    DC motor:

    — with a rotor speed of 3 500 rpm or more but not more than 5 000 rpm loaded and not more than 6 500 rpm when not loaded

    — with a power supply voltage of 100 V or more but not more than 240 V

    for use in the manufacture of electric fryers (1)

    0 %

    -

    31.12.2017

    ex 8501 10 99

    70

    DC stepping motor, with

    — an angle of step of 7,5 ° (± 0,5 °)

    — a two-phase winding,

    — a rated voltage of 9 V or more, but not more than 16,0 V

    — of a specified temperature range covering at least - 40 °C to + 105 °C

    — with or without connecting pinion

    — with or without motor drive connector

    0 %

    -

    31.12.2018

     (7)ex 8501 10 99

    75

    Permanently excited DC motor with

    — a multiple-phase winding

    — an external diameter of 28 mm or more but not more than 35 mm,

    — a rated speed of not more than 12 000 rpm,

    — a power supply voltage of 8 V or more but not more than 27 V

    0 %

    -

    31.12.2020

    ex 8501 10 99

    79

    DC motor with brushes and an internal rotor with a three-phase winding, whether or not equipped with a worm, of a specified temperature range covering at least - 20 °C to + 70 °C

    0 %

    -

    31.12.2018

    ex 8501 10 99

    80

    DC stepping motor, with:

    — an angle of step of 7,5o (± 0,5°),

    — a pull-out torque at 25 °C of 25 mNm or more,

    — a pull-out pulse rate of 1 500 pps or more,

    — a two-phase winding, and

    — a rated voltage of 10,5 V or more, but not more than 16,0 V

    0 %

    -

    31.12.2018

    ex 8501 10 99

    81

    DC stepping motor, with an angle of step of 18 ° or more, a holding torque of 0,5 mNm or more, a coupling bracket the exterior dimensions of which do not exceed 22 mm × 68 mm, a two phase winding and an output of not more than 5 W

    0 %

    -

    31.12.2018

    ex 8501 10 99

    82

    DC motor, brushless, with an external diameter of not more than 29 mm, a rated speed of 1 500 (± 15 %) rpm or 6 800 (± 15 %) rpm, a supply voltage of 2 V or 8 V

    0 %

    -

    31.12.2019

     (7)ex 8501 31 00

    25

    DC motors, brushless, with:

    — an external diameter of 80 mm or more, but not more than 100 mm,

    — a supply voltage of 12 V,

    — an output at 20 °C of 300 W or more, but not more than 750 W,

    — a torque 20 °C of 2,00 Nm or more, but not more than 7,00 Nm,

    — a rated speed at 20 °C of 600 rpm or more, but not more than 3 100 rpm,

    — with or without the rotor angle position sensor of resolver type or Hall effect type,

    of the kind used in power steering systems for cars

    0 %

    -

    31.12.2017

    ex 8501 31 00

    30

    DC motor, brushless, with a three-phase winding, an external diameter of 85 mm or more, but not more than 115 mm, a nominal torque of 2,23 Nm (± 1,0 Nm), of an output of more than 120 W but not more than 520 W, calculated with 1 550 rpm (± 350 rpm) at a supply voltage of 12 V equipped with electronic circuit with sensors using the Hall effect, for use with an electric power steering control module (power steering motor) (1)

    0 %

    -

    31.12.2016

    ex 8501 31 00

    40

    Permanently excited DC motor with

    — a multiple-phase winding,

    — an external diameter of 30 mm or more but not more than 80 mm,

    — a rated speed of not more than 15 000 rpm,

    — an output of 45 W or more but not more than 300 W and

    — a supply voltage of 9 V or more but not more than 25 V

    0 %

    -

    31.12.2019

    ex 8501 31 00

    45

    DC motors, brushless, with:

    — an external diameter of 90 mm or more, but not more than 110 mm,

    — a rated speed of not more than 3 680 rpm,

    — an output of 600 W or more but not more than 740 W at 2 300 rpm and at 80 °C,

    — a supply voltage of 12 V,

    — a torque of not more than 5,67 Nm,

    — a rotor position sensor,

    — an electronic star-point relay, and

    — for use with an electric power steering control module

    0 %

    -

    31.12.2018

    ex 8501 31 00

    55

    DC motor with commutator, with

    — an external diameter of 27,5 mm or more, but not more than 45 mm,

    — a rated speed of 11 000 rpm or more, but not more than 23 200 rpm,

    — a rated supply voltage of 3,6 V or more, but not more than 230 V,

    — an output power of not more than 529 W,

    — a free load current of not more than 3,1 A,

    — a maximum efficiency of 54 % or more,

    for driving hand-held power tools

    0 %

    -

    31.12.2018

    ex 8501 31 00

    60

    Brushless DC motor that can revolve counter clockwise (CCW), with:

    — an input voltage of 264 V or more, but not more than 391 V,

    — an external diameter of 81 mm (± 2,5 mm) or more, but not more than 150 mm (± 0,8 mm),

    — an output power of not more than 125 W,

    — E or B class winding insulation,

    for use in the manufacture of indoor or outdoor units of split-type air conditioning machines (1)

    0 %

    -

    31.12.2016

     (7)ex 8501 32 00

    ex 8501 33 00

    50

    55

    Fuel cell module containing at least polymer electrolyte membrane fuel cells whether or not in a housing with an integrated cooling system, for use in the manufacture of motor vehicle propulsion systems (1)

    0 %

    -

    31.12.2018

    ex 8501 32 00

    ex 8501 33 00

    60

    15

    Traction motor, with:

    — a torque output of 200 Nm or more but not more than 300 Nm

    — a power output of 50 kW or more but not more than 100 kW

    — a speed of not more than 12 500 rpm

    for use in the manufacture of electric vehicles (1)

    0 %

    -

    31.12.2019

    ex 8501 33 00

    ex 8501 40 80

    ex 8501 53 50

    30

    50

    10

    Electric drive for motor vehicles, with an output of not more than 315 kW, with:

    — an AC or DC motor whether or not with transmission,

    — power electronics

    0 %

    -

    31.12.2016

    ex 8501 51 00

    ex 8501 52 20

    30

    50

    AC synchronous servo motor with resolver and brake for a maximum speed of not more than 6 000 rpm, with:

    — an output of 340 W or more but not more than 7,4 kW,

    — a flange of dimensions of not more than 180 mm × 180 mm, and

    — a length from flange to extreme end of resolver of not more than 271 mm

    0 %

    -

    31.12.2016

     (7)ex 8501 61 20

    35

    Fuel cell module, AC generator with an output of 7,5 kVA or less, consisting of:

    — a Hydrogen generator (desulphurizer, reformer and cleaner)

    — a PEM fuel cell stack, and

    — an Inverter

    for use as a part in a heating appliance

    0 %

    -

    31.12.2020

    ex 8501 62 00

    30

    Fuel cell system

    — consisting of at least phosphoric acid fuel cells,

    — in a housing with integrated water management and gas treatment,

    — for permanent, stationary energy supply

    0 %

    -

    31.12.2017

    ex 8503 00 91

    ex 8503 00 99

    31

    32

    Rotor, at the innerside provided with one or two magnetic rings whether or not incorporated in a steel ring

    0 %

    p/st

    31.12.2018

    ex 8503 00 99

    31

    Stamped collector of an electric motor, having an external diameter of not more than 16 mm

    0 %

    p/st

    31.12.2018

    ex 8503 00 99

    33

    Stator for brushless motor of electrical power steering with a roundness tolerance of 50 μm

    0 %

    p/st

    31.12.2016

    ex 8503 00 99

    34

    Rotor for brushless motor of electrical power steering with a roundness tolerance of 50 μm

    0 %

    p/st

    31.12.2016

    ex 8503 00 99

    35

    Transmitter resolver for brushless motors of electrical power steering

    0 %

    p/st

    31.12.2019

    ex 8503 00 99

    40

    Fuel cell membrane, in rolls or sheets, with a width of not more than 150 cm, of a kind used for manufacture of fuel cells in heading 8501

    0 %

    p/st

    31.12.2017

    ex 8503 00 99

    50

    Stator for brushless motor, with:

    — an internal diameter of 206,6 mm (± 0,5)

    — an external diameter of 265,0 mm (± 0,2), and

    — a width of 41,00 mm (± 0,3)

    of a kind used in the manufacture of washing machine, washer-dryer or dryer equipped with direct drive drums

    0 %

    p/st

    31.12.2018

    ex 8503 00 99

    60

    Engine cover for electronic belt drive steering system of galvanized steel with a thickness of not more than 2,5 mm (± 0,25 mm)

    0 %

    p/st

    31.12.2019

    ex 8504 31 80

    20

    Transformer for use in the manufacture of inverters in LCD modules (1)

    0 %

    -

    31.12.2017

    ex 8504 31 80

    30

    Switching transformers, having a power handling capacity of not more than 1 kVA for use in the manufacture of static converters (1)

    0 %

    -

    31.12.2018

    ex 8504 31 80

    40

    Electrical transformers:

    — with a capacity of 1 kVA or less

    — without plugs or cables,

    for internal use in the manufacture of set top boxes and TVs (1)

    0 %

    -

    31.12.2017

    ex 8504 40 82

    40

    Printed circuit board equipped with a bridge rectifier circuit and other active and passive components:

    — with two output connectors

    — with two input connectors which are available and useable in parallel

    — able to switch between bright and dimmed operation mode

    — with an input voltage of 40 V (+ 25 % -15 %) or 42 V (+ 25 % -15 %) in bright operation mode, with an input voltage of 30 V (± 4 V) in dimmed operation mode, or

    — with an input voltage of 230 V (+ 20 % -15 %) in bright operation mode, with an input voltage of 160 V (± 15 %) in dimmed operation mode, or

    — with an input voltage of 120 V (15 % -35 %) in bright operation mode, with an input voltage of 60 V (± 20 %) in dimmed operation mode

    — with an input current reaching 80 % of its nominal value within 20 ms

    — with an input frequency of 45 Hz or more, but not more than 65 Hz for 42 V and 230 V, and 45-70 Hz for 120 V versions

    — with an maximum inrush current overshoot of not more than 250 % of the input current

    — with a period of the inrush current overshoot of not more than 100 ms

    — with an input current undershoot of not less than 50 % of the input current

    — with a period of the inrush current undershoot of not more than 20 ms

    — with a presettable output current

    — with an output current reaching 90 % of its nominal pre-set value within 50 ms

    — with an output current reaching zero within 30 ms after removal of the input voltage

    — with an defined failure status in case of no-load or too-high load (end-of-life function)

    0 %

    p/st

    31.12.2017

    ex 8504 40 88

    30

    DC to AC inverter for use in traction motor control for use in the manufacture of electric vehicles (1)

    0 %

    p/st

    31.12.2019

    ex 8504 40 90

    20

    Direct current to direct current converter

    0 %

    p/st

    31.12.2018

    ex 8504 40 90

    30

    Static converter comprising a power switch with insulated-gate bipolar transistors (IGBTs), contained in a housing, for use in the manufacture of microwave ovens of subheading 8516 50 00  (1)

    0 %

    p/st

    31.12.2018

    ex 8504 40 90

    40

    Semiconductor power modules comprising:

    — power transistors,

    — integrated circuits,

    — whether or not containing diodes and with or without thermistors,

    — an operating voltage of not more than 600 V,

    — not more than three electrical outputs each containing two power switches (whether MOSFET (Metal Oxide Semiconductor Field-Effect Transistor) or IGBT (Insulated Gate Bi-polar Transistors)) and internal drives, and

    — a rms (root mean square) current rating of not more than 15,7 A

    0 %

    p/st

    31.12.2018

    ex 8504 40 90

    50

    Drive unit for industrial robot with:

    — one or six 3-phase motor outputs with maximum 3 x 32 A,

    — a main power input of 220 V AC or more, but not more than 480 V AC, or 280 V DC or more, but not more than 800 V DC

    — a logic power input of 24 V DC,

    — an EtherCat communication interface,

    — and a dimension of 150 x 140 x 120 mm or more, but not more than 335 x 430 x 179 mm

    0 %

    p/st

    31.12.2018

    ex 8504 40 90

    60

    Transfer moulded semiconductor power module comprising:

    — power transistors,

    — integrated circuits,

    — whether or not containing diodes and with or without thermistors,

    — a circuit configuration,

    — either containing a direct drive stage with an operating voltage of more than 600 V,

    — or containing a direct drive stage with an operating voltage of not more than 600 V and a rms current of more than 15,7 A,

    — or including one or more power factor correction modules

    0 %

    p/st

    31.12.2018

    ex 8504 40 90

    70

    Module for converting alternating current into direct current and direct current into direct current with

    — a rated power of not more than 100 W

    — an input voltage of 80 V or more, but not more than 305 V

    — an certified input frequency of 47 Hz or more, but not more than 440 Hz

    — one or more constant voltage output(s)

    — an operating temperature range of - 40 °C or more, but not more than + 85 °C,

    — pins for mounting to a printed circuit

    0 %

    p/st

    31.12.2018

    ex 8504 40 90

    80

    Power converter containing:

    — a DC to DC converter

    — a charger of a capacity of not not more than 7 kW

    — switching functions

    for use in the manufacture of electric vehicles (1)

    0 %

    p/st

    31.12.2019

    ex 8504 50 95

    20

    Inductor with an inductance of not more than 62 mH

    0 %

    p/st

    31.12.2018

     (7)ex 8504 50 95

    40

    Coil choke with:

    — an inductance of 4,7 μΗ (± 20 %),

    — a DC resistance of not more than 0,1 Ohms,

    — an insulation resistance of 100 MOhms or more at 500 V (DC)

    for use in the manufacture of LCD and LED module power boards (1)

    0 %

    p/st

    31.12.2020

    ex 8504 50 95

    50

    Solenoid coil with

    — a power consumption of not more than 6 W,

    — an insulation resistance of more than 100 M ohms, and

    — an insert hole of 11,4 mm or more, but not more than 11,8 mm

    0 %

    p/st

    31.12.2017

    ex 8504 90 11

    10

    Ferrite cores, other than for deflection yokes

    0 %

    p/st

    31.12.2018

    ex 8504 90 11

    20

    Reactor cores for use in a High Voltage Direct Current thyristor converter

    0 %

    p/st

    31.12.2019

    ex 8504 90 99

    20

    Thyristor SGCT (Symmetric Gate-Commutated Thyristor) with integrated gate driver:

    — being a power electronic circuit mounted on the PCB, equipped with SGCT thyristor and electric and electronic components,

    — having an ability to block the voltage - 6 500 V — in both directions (conducting and the reverse direction)

    of a kind used in medium voltagestatic converters (rectifiers and inverters)

    0 %

    p/st

    31.12.2019

    ex 8505 11 00

    31

    Permanent magnet having a remanence of 455 mT (± 15 mT)

    0 %

    p/st

    31.12.2018

    ex 8505 11 00

    33

    Permanent magnets consisting of an alloy of neodymium, iron and boron, either in the shape of a rounded rectangle with

    — a length of not more than 90 mm,

    — a width of not more than 90 mm, and

    — a height of not more than 55 mm,

    or in the shape of a disc with a diameter of not more than 90mm, whether or not containing a hole in the centre

    0 %

    p/st

    31.12.2018

    ex 8505 11 00

    35

    Permanent magnets of an alloy of either neodymium, iron and boron, or samarium and cobalt coated having undergone inorganic passivation (inorganic coating) using zinc phosphate for the industrial manufacture of products in motor or sensory applications (1)

    0 %

    p/st

    31.12.2017

    ex 8505 11 00

    45

    A quarter sleeve, intended to become permanent magnet after magnetisation,

    — consisting of at least neodymium, praseodym, iron, boron, dysprosium, aluminium and cobalt,

    — with a width of 9,2 mm (- 0,1)

    — with a length of 20 mm (+ 0,1) or 30 mm (+ 0,1)

    of a kind used on rotors for the manufacture of fuel pumps

    0 %

    p/st

    31.12.2019

    ex 8505 11 00

    50

    Bars specifically shaped, intended to become permanent magnets after magnetisation, containing neodymium, iron and boron, with dimensions:

    — a length of 15 mm or more but not more than 52 mm,

    — a width of 5 mm or more but not more than 42 mm,

    of a kind to be used in the manufacture of electric servomotors for industrial automation

    0 %

    p/st

    31.12.2017

    ex 8505 11 00

    60

    Rings, tubes, bushings or collars made from an alloy of neodymium, iron and boron, with

    — a diameter of not more than 45 mm,

    — a height of not more than 45 mm,

    of a kind used in the manufacture of permanent magnets after magnetisation

    0 %

    -

    31.12.2017

    ex 8505 11 00

    70

    Disc consisting of an alloy of neodymium, iron and boron, covered with nickel or zinc, that after magnetisation is intended to become a permanent magnet

    — whether or not containing a hole in the centre,

    — with a diameter of not more than 90 mm,

    of a kind used in car loudspeakers

    0 %

    -

    31.12.2018

    ex 8505 11 00

    80

    Articles in the form of a triangle, square or rectangle, intended to become permanent magnets after magnetisation, containing neodymium, iron and boron, with dimensions of:

    — a length of 9 mm or more but not more than 105 mm,

    — a width of 5 mm or more but not more than 105 mm,

    — a height of 2 mm or more but not more than 55 mm

    0 %

    -

    31.12.2018

    ex 8505 19 90

    30

    Articles of agglomerated ferrite in the shape of a disc with a diameter of not more than 120 mm, containing a hole in the centre intended to become permanent magnets after magnetisation with a remanence between245 mT and 470 mT

    0 %

    -

    31.12.2018

    ex 8505 20 00

    30

    Electromagnetic clutch, for use in the manufacture of compressors of air conditioning machines of motor vehicles (1)

    0 %

    p/st

    31.12.2018

    ex 8505 90 20

    30

    Coil for an electromagnetic valve, with:

    — a plunger

    — a diameter of 12,9 mm (± 0,1),

    — a height without plunger of 20,5 mm (± 0,1),

    — an electric cable with connector, and

    in a cylindrical metal housing

    0 %

    p/st

    31.12.2019

    ex 8505 90 20

    91

    Solenoid with a plunger, operating at a nominal supply voltage of 24 V at a nominal DC of 0,08 A, for use in the manufacture of products falling within heading 8517  (1)

    0 %

    p/st

    31.12.2018

    ex 8506 50 90

    10

    Lithium iodine single cell battery the dimensions of which do not exceed 9 mm × 23 mm × 45 mm and a voltage of not more than 2,8 V

    0 %

    -

    31.12.2018

    ex 8506 50 90

    20

    Unit consisting of not more than 2 lithium batteries embedded in a socket for integrated circuits (battery-buffered socket), with not more than 32 connections and incorporating a control circuit

    0 %

    -

    31.12.2018

    ex 8506 50 90

    30

    Lithium-iodine or lithium-silver vanadium oxide single cell battery of dimensions of not more than 28 mm × 45 mm × 15 mm and a capacity of not less than 1,05 Ah

    0 %

    -

    31.12.2018

    ex 8507 10 20

    30

    Lead-acid accumulators or modules, of a kind used for starting piston engines with

    — a nominal capacity of not more 32 Ah,

    — a length of not more than 205 mm,

    — a width of not more than 130 mm, and

    — a height of not more than 190 mm

    for use in the manufacture of articles of CN-code 8711  (1)

    0 %

    -

    31.12.2018

     (7)ex 8507 10 20

    80

    Lead acid starter battery, with:

    — a charge acceptance capacity of 200 % or more of the level of an equivalent conventional flooded battery during the first 5 seconds of charge,

    — a liquid electrolyte,

    for use in the manufacture of passenger cars and light commercial vehicles employing high regenerative alternator controls or start/stop systems with high regenerative alternator controls (1)

    0 %

    -

    31.12.2020

    ex 8507 30 20

    30

    Cylindrical nickel-cadmium accumulator or module, with a length of 65,3 mm (± 1,5 mm) and a diameter of 14,5 mm (± 1mm), having a nominal capacity of 1 000 mAh or more, for use in the manufacture of rechargeable batteries (1)

    0 %

    -

    31.12.2018

    ex 8507 50 00

    ex 8507 60 00

    20

    20

    Rectangular accumulator or module, with a length of not more than 69 mm, a width of not more than 36 mm and a thickness of not more than 12 mm, for use in the manufacture of rechargeable batteries (1)

    0 %

    -

    31.12.2018

    ex 8507 50 00

    30

    Cylindrical nickel-hydride accumulator or module, of a diameter of not more than 14,5 mm, for the manufacture of rechargeable batteries (1)

    0 %

    -

    31.12.2018

     (7)ex 8507 60 00

    15

    Cylindrical lithium-ion-accumulators or modules with:

    — a nominal capacity of 8,8 Ah or more, but not more than 18 Ah,

    — a nominal voltage of 36 V or more, but not more than 48 V,

    — a power of 300 Wh or more, but not more than 648 Wh,

    for use in the manufacture of electric bicycles (1)

    0 %

    -

    31.12.2020

     (7)ex 8507 60 00

    17

    Lithium-ion starter accumulator, consisting of four rechargeable lithium-ion secondary cells, with:

    — a rated voltage of 12 V,

    — a length of 350 mm or more but not more than 355 mm,

    — a width of 170 mm or more but not more than 180 mm,

    — a height of 180 mm or more but not more than 195 mm,

    — weighing 10 kg or more but not more than 15 kg

    — a nominal charge of 60 Ah or more, but not more than 80 Ah

    0 %

    -

    31.12.2020

     (7)ex 8507 60 00

    23

    Lithium-ion-accumulator or module with:

    — a nominal capacity of 72 Ah or more, but not more than 100 Ah,

    — a nominal voltage of 3,2 V

    — a weight of 1,9 kg more, but not more than 3,4 kg

    for use in the manufacture of rechargeable hybrid electric vehicle batteries (1)

    0 %

    -

    31.12.2020

    ex 8507 60 00

    25

    Rectangular modules for incorporation in lithium-ion rechargeable batteries, with:

    — a width of 352,5 mm (± 1 mm) or 367,1 mm (± 1mm)

    — a depth of 300 mm (± 2 mm) or 272,6 mm (± 1 mm)

    — a height of 268,9 mm (± 1,4 mm) or 229,5 mm (± 1mm)

    — a weight of 45,9 kg or 46,3 kg

    — a rating of 75 Ah, and

    — a nominal voltage of 60 V

    0 %

    -

    31.12.2017

     (7)ex 8507 60 00

    27

    Lithium-ion cylindrical accumulator with:

    — a nominal capacity of 10 Ah or more, but not more than 20 Ah;

    — a nominal voltage of 12,8 V (± 0,05) or more, but not more than 15,2 V (± 0,05);

    — a power of 128 Wh or more, but not more than 256 Wh,

    for use in the manufacture of electric bicycle drives (1)

    0 %

    -

    31.12.2020

    ex 8507 60 00

    30

    Cylindrical lithium-ion accumulator or module, with a length of 63 mm or more and a diameter of 17,2 mm or more, having a nominal capacity of 1 200 mAh or more, for use in the manufacture of rechargeable batteries (1)

    0 %

    -

    31.12.2019

     (7)ex 8507 60 00

    33

    Lithium-ion accumulator, with:

    — a length of 150 mm or more, but not more than 300 mm

    — a width of 700 mm or more, but not more than 1 000 mm

    — a height of 1 100 mm or more, but not more than 1 500 mm

    — a weight of 75 kg or more, but not more than 160 kg

    — a nominal capacity not less than 150 Ah and not more than 500 Ah

    0 %

    -

    31.12.2020

     (7)ex 8507 60 00

    37

    Lithium-ion accumulator, with:

    — a length of 1 200 mm or more, but not more than 2 000 mm

    — a width of 800 mm or more, but not more than 1 300 mm

    — a height of 2 000 mm or more, but not more than 2 800 mm

    — a weight of 1 800 kg or more, but not more than 3 000 kg

    — a nominal capacity of 2 800 Ah or more but not more than 7 200 Ah

    0 %

    -

    31.12.2020

     (7)ex 8507 60 00

    43

    Lithium-ion accumulators, with

    — a thickness of not more than 4,15 mm,

    — a width of not more than 245,15 mm,

    — a length of not more than 90,15 mm,

    — a nominal capacity of 1 000 mAh or more but not more than 10 000 mAh,

    — a weight of not more than 250 g

    for use in the manufacture of products falling within subheading 8471 30 00  (1)

    0 %

    -

    31.12.2020

    ex 8507 60 00

    ex 8507 80 00

    45

    20

    Rechargeable Lithium-ion Polymer Battery with:

    — a nominal capacity of 1 060 mAh,

    — a nominal voltage of 7,4 V (average voltage at 0,2 C discharge),

    — a charging voltage of 8,4 V (± 0,05),

    — a length of 86,4 mm ((± 0,1),

    — a width of 45 mm (± 0,1),

    — a height of 11 mm (± 0,1),

    for use in the manufacture of cash registers (1)

    0 %

    -

    31.12.2019

     (7)ex 8507 60 00

    47

    Lithium-ion accumulators, with

    — a thickness of not more than 4,15 mm,

    — a width of not more than 75,15 mm,

    — a length of not more than 150,15 mm,

    — a nominal capacity of 1 000 mAh or more but not more than 10 000 mAh,

    — a weight of not more than 150 g,

    for use in the manufacture of products falling within subheading 8517 12 00  (1)

    0 %

    -

    31.12.2020

    ex 8507 60 00

    50

    Modules for the assembly of batteries of ion lithium electric accumulators with:

    — a length of 298 mm or more, but not more than 408 mm,

    — a width of 33,5 mm or more, but not more than 209 mm,

    — a height of 138 mm or more, but not more than 228 mm,

    — a weight of 3,6 kg or more, but not more than 17 kg, and

    — a power of 458 Wh or more, but not more than 2 158 Wh

    0 %

    -

    31.12.2017

     (7)ex 8507 60 00

    53

    Batteries of lithium-ion electric accumulators or rechargeable module:

    — a length of 1 203 mm or more, but not more than 1 297 mm,

    — a width of 282 mm or more, but not more than 772 mm,

    — a height of 792 mm or more, but not more than 839 mm,

    — a weight of 253 kg or more, but not more than 293 kg,

    — power of 22 kWh or 26 kWh, and

    — constituted of 24 or 48 modules

    0 %

    -

    31.12.2017

    ex 8507 60 00

    55

    Lithium-ion accumulator or module in cylindrical form, with:

    — a base similar to an ellipse squeezed in the middle,

    — a length of 49 mm or more (not including terminals),

    — a width of 33,5 mm or more,

    — a thickness of 9,9 mm or more,

    — a rated capacity of 1,75 Ah or more, and

    — a rated voltage of 3,7 V,

    for the manufacture of rechargeable batteries (1)

    0 %

    -

    31.12.2017

    ex 8507 60 00

    57

    Lithium-ion accumulator or module, cuboid in shape, with:

    — some of the corners rounded off,

    — a length of 76 mm or more (not including terminals),

    — a width of 54,5 mm or more,

    — a thickness of 5,2 mm or more,

    — a rated capacity of 3 100 mAh or more, and

    — a rated voltage of 3,7 V,

    for the manufacture of rechargeable batteries (1)

    0 %

    -

    31.12.2017

     (7)ex 8507 60 00

    60

    Lithium-ion rechargeable batteries, with:

    — a length of 1 213 mm or more, but not more than 1 575 mm,

    — a width of 245 mm or more but not more than 1 200 mm,

    — a height of 265 mm or more, but not more than 755 mm,

    — a weight of 265 kg or more but not more than 294 kg,

    — a nominal capacity of 66,6 Ah,

    put up in packs of 48 modules

    0 %

    -

    31.12.2020

     (7)ex 8507 60 00

    63

    Lithium-ion rechargeable batteries, with:

    — a length of 1 475 mm or more, but not more than 2 820 mm

    — a width of 935 mm or more, but not more than 1 660 mm

    — a height of 260 mm or more, but not more than 600 mm

    — a weight of 320 kg or more, but not more than 700 kg

    — a power of not more than 130 kWh

    0 %

    -

    31.12.2017

    ex 8507 60 00

    65

    Cylindrical lithium ion cell with

    — 3,5 VDC to 3,8 VDC,

    — 300 mAh to 900 mAh, and

    — a diameter of 10,0 mm to 14,5 mm

    0 %

    -

    31.12.2016

    ex 8507 60 00

    75

    Rectangular lithium-ion-accumulator, with

    — a metal casing,

    — a length of 173 mm (± 0,15 mm),

    — a width of 21 mm (± 0,1 mm),

    — a height of 91 mm (± 0,15 mm),

    — a nominal voltage of 3,3 V and,

    — a nominal capacity of 21 Ah or more

    0 %

    -

    31.12.2016

     (7)ex 8507 60 00

    80

    Rectangular lithium-ion-accumulator or module, with

    — a metal casing,

    — a length of 171 mm (± 3 mm),

    — a width of 45,5 mm (± 1 mm),

    — a height of 115 mm (± 1 mm),

    — a nominal voltage of 3,75 V, and

    — a nominal capacity of 50 Ah

    — for use in the manufacture of rechargeable batteries for motor vehicles (1)

    0 %

    -

    31.12.2020

     (7)ex 8507 60 00

    85

    Rectangular modules for incorporation in lithium-ion rechargeable batteries:

    — of a length of 312 mm or more, but not more than 350 mm

    — of a width of 79,8 mm or more, but not more than 225 mm

    — of a height of 35 mm or more, but not more than 168 mm

    — of a weight of 3,95 kg or more, but not more than 8,56 kg

    — with a rating of 66,6 Ah or more, but not more than 129 Ah

    0 %

    -

    31.12.2020

    ex 8507 90 80

    70

    Cut plate of nickel-plated copper foil, with:

    — a width of 70 mm (± 5 mm),

    — a thickness of 0,4 mm (± 0,2 mm),

    — a length of not more than 55 mm,

    for use in the manufacture of lithium-ion electric vehicle batteries (1)

    0 %

    p/st

    31.12.2016

     (7)ex 8508 70 00

    ex 8537 10 99

    10

    96

    Electronic circuit card without separate housing for actuating and controlling vacuum cleaner brushes powered by not more than 300 W

    0 %

    p/st

    31.12.2020

     (7)ex 8508 70 00

    ex 8537 10 99

    20

    98

    Electronic circuit cards that:

    — are connected by wire or radio frequency to each other and the motor controller card, and

    — regulate the functioning (switching on or off and suction capacity) of vacuum cleaners according to a stored program,

    — whether or not fitted with indicators that display the functioning of the vacuum cleaner (suction capacity and/or dust bag full and/or filter full)

    0 %

    p/st

    31.12.2020

    ex 8511 30 00

    30

    Igniter integrated coil assembly with:

    — an igniter,

    — a coil on plug assembly with an integrated mounting bracket,

    — a housing,

    — a length of 90 mm or more but not more than 200 mm (± 5 mm),

    — an operating temperature of - 40 °C or more but not more than 130 °C,

    — a voltage of 10,5 V or more, but not more than 16 V

    0 %

    p/st

    31.12.2019

    ex 8512 20 00

    10

    Fog lamps with galvanised inner surface, containing:

    — plastic holder with four or more brackets,

    — one or more, but not more than two 12 V bulbs,

    — connection cable with a connector,

    — plastic cover

    for use in the manufacture of goods of chapter 87 (1)

    0 %

    p/st

    31.12.2019

    ex 8512 20 00

    20

    Information screen displaying at least time, date and status of safety features in a vehicle with an operating voltage of 12 V or more, but not more than 14,4 V, of a kind used in the manufacturing of goods of Chapter 87

    0 %

    p/st

    31.12.2019

    ex 8512 30 90

    10

    Horn assembly operating on piezomechanical principle for generating a specific sound signal, with a voltage of 12 V, comprising:

    — coil,

    — magnet,

    — metal membrane,

    — connector,

    — holder

    of a kind used in the manufacture of goods of Chapter 87

    0 %

    p/st

    31.12.2019

    ex 8512 40 00

    ex 8516 80 20

    10

    20

    Car door mirror heating foil:

    — with two electrical contacts,

    — with an adhesive layer on both sides (on the side of the plastic holder of the mirror and on the side of the mirror glass),

    — with a protective paper film on both sides

    0 %

    -

    31.12.2018

    ex 8512 90 90

    10

    Ultrasonic parking sensor with

    — printed circuit board inside the housing and sensor cell on the cover connected through terminal pins,

    — an operating voltage of not more than 12 V,

    — ability to receive and transmit signals processed by the control unit

    of a kind used in the manufacturing of goods of Chapter 87

    0 %

    p/st

    31.12.2019

    ex 8514 20 80

    ex 8516 50 00

    ex 8516 60 80

    10

    10

    10

    Cavity assembly comprising at least:

    — a transformer with an input of not more than 240 V and an output of not more than 3 000 W

    — an AC or DC fan motor with an output of not more than 42 watts

    — a housing made of stainless steel

    — with or without a magnetron of a microwave output power of not more than 900 W

    for use in the manufacture of built-in products of headings 8514 20 80 , 8516 50 00 and 8516 60 80  (1)

    0 %

    p/st

    31.12.2019

    ex 8516 90 00

    60

    Ventilation sub-assembly of an electric deep-fat fryer:

    — fitted with a motor having a power rating of 8 W at 4 600 rpm,

    — governed by an electronic circuit,

    — operating at ambient temperatures above 110 °C,

    — fitted with a thermoregulator

    0 %

    p/st

    31.12.2019

    ex 8516 90 00

    70

    Inner pot:

    — containing side and central openings,

    — of annealed aluminium,

    — with a ceramic coating, heat resistant to more than 200 °C

    for use in the manufacture of an electric fryer (1)

    0 %

    p/st

    31.12.2017

    ex 8516 90 00

    80

    Door assembly incorporating a capacitive sealing element and wavelength choke for use in the manufacture of built-in products of headings 8514 20 80 , 8516 50 00 and 8516 60 80  (1)

    0 %

    p/st

    31.12.2019

    ex 8518 21 00

    20

    Loudspeaker of

    — an impedance of 4 Ohm or more but not exceeding 16 Ohm,

    — nominal power of 2 W or more but not exceeding 20 W,

    — with or without plastic bracket, and

    — electric wired with a connector or wireless,

    mounted on a cabinet for use in the manufacture of TV sets and video monitors (1)

    0 %

    -

    31.12.2019

    ex 8518 29 95

    30

    Loudspeakers of:

    — an impedance of 3 Ohm or more, but not more than 16 Ohm,

    — a nominal power of 2 W or more, but not more than 20 W,

    — with or without plastic bracket, and

    — with or without electric cable fitted with connectors,

    of a kind used for TV sets and video monitors manufacture as well as home entertainment systems

    0 %

    -

    31.12.2017

    ex 8518 30 95

    20

    Headphone and earphone for hearing aids, contained in a housing the exterior dimensions of which, excluding connecting points, do not exceed 5 mm × 6 mm × 8 mm

    0 %

    p/st

    31.12.2018

    ex 8518 40 80

    91

    Circuit board sub-assembly, comprising digital audio signal decoding, audio signal processing and amplification with dual and/or multi-channel functionality

    0 %

    -

    31.12.2019

     (7)ex 8518 40 80

    92

    Circuit board sub-assembly, comprising power supply, active equalizer and power amplifier circuits

    0 %

    -

    31.12.2020

    ex 8518 90 00

    30

    Magnet system consisting of:

    — a steel coreplate, in the form of a disk on one side provided with a cylinder

    — a neodymium magnet

    — an upper plate

    — a lower plate

    of a kind used in car loudspeakers

    0 %

    p/st

    31.12.2019

    ex 8518 90 00

    40

    Loudspeaker cone, made from paper pulp or polypropylene, with accompanying dustcaps, of a kind used in car loudspeakers

    0 %

    p/st

    31.12.2019

    ex 8518 90 00

    50

    Diaphragm for an electrodynamic speaker with

    — an outside diameter of 25 mm or more but not more than 250 mm,

    — a resonance frequency of 20 Hz or more but not more than 150 Hz,

    — a total height of 5 mm or more but not more than 50 mm,

    — an edge thickness of 0,1 mm or more but not more than 3 mm

    0 %

    p/st

    31.12.2019

    ex 8518 90 00

    80

    Integrated car loudspeaker housing, consisting of:

    — a speaker frame and magnet system holder with a protective coating and

    — an embossed anti-dust cloth

    0 %

    p/st

    31.12.2019

    ex 8518 90 00

    91

    Integrally cold-upsetted steel coreplate, in the form of a disk on one side provided with a cylinder, for use in the manufacture of loudspeakers (1)

    0 %

    p/st

    31.12.2018

    ex 8521 90 00

    20

    Digital video recorder:

    — without a hard disk drive,

    — with or without a DVD-RW drive,

    — with either motion detection or capability of motion detection through IP connectivity via LAN connector

    — with or without a USB serial port,

    for use in the manufacture of closed-circuit television (CCTV) surveillance systems (1)

    0 %

    -

    31.12.2019

    ex 8522 90 49

    50

    Electronic assembly for a laser read-head of a compact disc player, comprising:

    — a printed circuit,

    — a photo-detector, in the form of a monolithic integrated circuit, contained in a housing,

    — not more than 3 connectors,

    — not more than 1 transistor,

    — not more than 3 variable and 4 fixed resistors,

    — not more than 5 capacitors,

    the whole mounted on a support

    0 %

    p/st

    31.12.2018

    ex 8522 90 49

    ex 8527 99 00

    ex 8529 90 65

    60

    10

    25

    Printed circuit board assembly comprising:

    — a radio tuner (capable of receiving and decoding radio signals and transmitting those signals within the assembly) without signal processing capabilities,

    — a microprocessor capable of receiving remote control messages and controlling the tuner chipset,

    for use in the manufacture of home entertainment systems (1)

    0 %

    p/st

    31.12.2019

    ex 8522 90 49

    ex 8527 99 00

    ex 8529 90 65

    65

    20

    40

    Printed circuit board subassembly, comprising:

    — a radio tuner, capable of receiving and decoding radio signals and transmitting those signals within the assembly, with a signal decoder,

    — a radio frequency (RF) remote control receiver,

    — an infrared remote control signal transmitter,

    — a SCART signal generator,

    — a TV state sensor

    for use in the manufacture of home entertainment systems (1)

    0 %

    p/st

    31.12.2019

    ex 8522 90 49

    70

    Assembly, comprising at least a flexible printed circuit, a laser driver integrated circuit and a signal converter integrated circuit

    0 %

    p/st

    31.12.2018

    ex 8522 90 80

    15

    Heat sinks and cooling fins of aluminium, for maintaining the operating temperature of transistors and/or integrated circuits in products of heading 8521

    0 %

    p/st

    31.12.2017

    ex 8522 90 80

    ex 8529 90 92

    30

    30

    Holder, fixing item or internal stiffener of metal, for use in the manufacture of televisions, monitors and video players (1)

    0 %

    p/st

    31.12.2016

    ex 8522 90 80

    65

    Assembly for optical discs, comprising at least an optical unit and DC motors, whether or not capable of double layer recording

    0 %

    p/st

    31.12.2018

    ex 8522 90 80

    70

    Video tape recording/reproducing assembly comprising at least a motor and a printed circuit board containing integrated circuits with driver or control functions, whether or not incorporating a transformer, for use in the manufacture of products falling within heading 8521  (1)

    0 %

    p/st

    31.12.2018

    ex 8522 90 80

    75

    Optical reading head for CD player, consisting of one laser diode, one photo detector integrated circuit and one beam splitter

    0 %

    p/st

    31.12.2018

    ex 8522 90 80

    80

    Laser optical drive unit assembly (so called mecha units) for the recording and/or reproduction of digital video and/or audio signals, comprising at least a laser optical reading and/or writing unit, one or more DC motors and not containing a printed circuit board or containing a printed circuit board not capable of signal processing for sounds and images, for use in the manufacture of products falling within headings 8519 , 8521 , 8526 , 8527 , 8528 or 8543  (1)

    0 %

    p/st

    31.12.2018

    ex 8522 90 80

    81

    Laser optical pick up unit for the reproduction of optical signals from CD or DVD and the recording of optical signal on DVD, comprising at least

    — a laser diode,

    — a laser driver integrated circuit,

    — a photo detector integrated circuit,

    — a front monitor integrated circuit and an actuator,

    for use in the manufacture of products falling within heading 8521  (1)

    0 %

    p/st

    31.12.2016

    ex 8522 90 80

    83

    Blu-ray optical pick-up unit, whether or not recordable, for use with Blu-ray, DVD and CD discs, comprising at least:

    — laser diodes operating at three different wavelengths,

    — a photo detector integrated circuit, and

    — an actuator,

    for the manufacture of products falling within heading 8521  (1)

    0 %

    p/st

    31.12.2018

    ex 8522 90 80

    84

    Blu-ray drive mechanism, whether or not recordable, for use with Blu-ray, DVD and CD discs, comprising at least:

    — an optical pick up unit with laser diodes operating at three different wavelengths,

    — a spindle motor,

    — a stepping motor

    0 %

    p/st

    31.12.2018

    ex 8522 90 80

    85

    Video head drum, with video heads or with video and audio heads and an electric motor, for use in the manufacture of products falling within heading 8521  (1)

    0 %

    p/st

    31.12.2018

    ex 8522 90 80

    96

    Hard disk drive, for incorporation in products of heading 8521  (1)

    0 %

    p/st

    31.12.2017

    ex 8522 90 80

    97

    Tuner transforming high-frequency signals into mid-frequency signals, for use in the manufacture of products falling under heading 8521  (1)

    0 %

    p/st

    31.12.2016

    ex 8525 80 19

    20

    Assembly for television cameras of dimensions of not more than 10 mm × 15 mm × 18 mm, comprising an image sensor, an objective and a color processor, having an image resolution of not more than 1 024 × 1 280 pixels, whether or not fitted with cable and/or housing, for the manufacture of goods of subheading 8517 12 00  (1)

    0 %

    -

    31.12.2018

    ex 8525 80 19

    25

    Long wavelength infrared camera (LWIR camera) (according to ISO/TS 16949), with:

    — a sensitivity in the wavelength area of 8 μm or more, but not more than 14 μm,

    — a resolution of 324 × 256 pixels,

    — a weight of not more than 400 g,

    — measurements of not more than 70 mm × 67 mm × 75 mm,

    — a waterproof housing and an automotive- qualified plug, and

    — a deviation of the output signal over the entire work temperature range of not more than 20 %

    0 %

    -

    31.12.2019

    ex 8525 80 19

    ex 8525 80 91

    31

    10

    Camera:

    — of a weight of not more than 5,9 kg,

    — without a housing,

    — of dimensions of not more than 405 mm × 315 mm,

    — with a single Charge-Couple-Device (CCD) or Complementary Metal Oxide Semiconductor (CMOS) sensor,

    — with effective pixels of not more than 5 megapixels,

    for use in closed circuit television (CCTV) surveillance systems or in appliances for eye-checks (1)

    0 %

    -

    31.12.2018

    ex 8525 80 19

    40

    Assembly for cameras used in computer notebooks of dimensions of not more than 15 mm × 25 mm × 25 mm, comprising an image sensor, an objective and a colour processor, having an image resolution of not more than 1 600 × 1 200 pixels, whether or not fitted with cable and/or housing, whether or not mounted on a base and containing a LED chip (1)

    0 %

    -

    31.12.2016

    ex 8525 80 19

    45

    Camera module with a resolution of 1 280 * 720 P HD, with two microphones, for use in the manufacture of products of heading 8528  (1)

    0 %

    -

    31.12.2017

    ex 8525 80 19

    50

    Remote camera head, whether or not contained in a housing

    — with dimensions (without cable socket) of not more than 27 x 30 x 38,5 mm (width x height x length),

    — with three MOS imaging sensors with two or more effective megapixels per sensor and a prism block for distribution of the RGB spectrum colours to the three sensors,

    — with a C-Mount lens mount,

    — with a weight of not more than 70 g,

    — with an LVDS digital video output,

    — with a permanent EEPROM memory for local storage of calibration data for colour rendering and defective pixel compensation

    — for use in the manufacture of miniaturised industrial camera systems (1)

    0 %

    -

    31.12.2018

    ex 8525 80 19

    55

    Camera module with a resolution of 1 920 x 1 080 P HD with two microphones for use in the manufacture of products falling within heading 8528  (1)

    0 %

    -

    31.12.2018

    ex 8525 80 19

    60

    Image scanning cameras, using:

    — a ‘Dynamic’- or ‘Static overlay lines’ system,

    — an output NTSC video signal,

    — a voltage of 6,5 V or more,

    — an illuminance of 0,5 lux or more

    0 %

    -

    31.12.2019

     (7)ex 8525 80 19

    65

    Cameras using MIPI electrical interface with:

    — an image sensor,

    — an objective (lens),

    — a colour processor,

    — a flexible printed circuit board or a printed circuit board,

    — whether or not capable of receiving audio signals,

    — a module dimension of not more than 15mm x 15mm x 15mm,

    — a resolution of 2 mega pixel or more (1 616 *1 232 pixels and higher),

    — whether or not wired, and

    — a housing

    for use in the manufacture of products falling within subheading 8517 12 00 or 8471 30 00  (1)

    0 %

    -

    31.12.2020

     (7)ex 8526 91 20

    ex 8527 29 00

    80

    10

    Integrated audio module (IAM) with a digital video output for connection to an LCD touch screen monitor, interfaced over the Media Oriented Systems Transport (MOST) network and transported over the MOST High protocol, with or without

    — a printed circuit board (PCB) containing a Global Positioning System (GPS) receiver, a gyroscope, and a Traffic Message Channel (TMC) tuner,

    — a hard disk drive supporting multiple maps,

    — a HD radio,

    — a voice recognition system,

    — a CD and DVD drive,

    and including

    — Bluetooth, MP3 and USB input connectivity,

    — a voltage of 10 V or more but not more than 16 V,

    for the use in the manufacture of vehicles in Chapter 87 (1)

    0 %

    -

    30.06.2016

    ex 8527 91 99

    ex 8529 90 65

    20

    85

    Assembly consisting of at least:

    — an audio frequency amplifier unit, comprising at least an audio frequency amplifier and a sound generator,

    — a transformer, and

    — a radio broadcast receiver

    for use in the manufacture of consumer electronic products (1)

    0 %

    -

    31.12.2019

    ex 8528 49 10

    10

    Video monitor comprising:

    — a flat screen monochrome cathode-ray tube with a diagonal measurement of the screen of not more than 110 mm and equipped with a deflector yoke, and

    — a printed circuit on which are mounted a deflection unit, a video-amplifier and a transformer,

    the whole mounted or not on a chassis, for the manufacture of video entry-phones, video telephones or surveillance apparatus (1)

    0 %

    -

    31.12.2018

     (7)ex 8528 59 70

    10

    Liquid crystal display colour video monitors, excluding those combined with other apparatus, having a DC input voltage of 7 V or more but not more than 30 V, with a diagonal measurement of the screen of 33,2 cm or less,

    — without a housing, with back cover and mounting frame,

    — or with a housing,

    used for permanent incorporation or permanent mounting, during industrial assembly, into goods of Chapters 84 to 90 and 94 (1) (6)

    0 %

    -

    31.12.2018

    ex 8528 59 70

    20

    Liquid crystal display colour video monitor assembly mounted on a frame,

    — excluding those combined with other apparatus,

    — comprising touch screen facilities, a printed circuit board with drive circuitry and power supply,

    used for permanent incorporation or permanent mounting into entertainment systems for vehicles (1)

    0 %

    -

    31.12.2019

    ex 8529 10 80

    20

    Ceramic filter package comprising 2 ceramic filters and 1 ceramic resonator for a frequency of 10,7 MHz (± 30 kHz), contained in a housing

    0 %

    p/st

    31.12.2018

    ex 8529 10 80

    50

    Ceramic filter for a centre frequency of 450 kHz (± 1,5 kHz) or 455 kHz (± 1,5 kHz), with a bandwidth of not more than 30 kHz at 6 dB and not more than 70 kHz at 40 dB, contained in a housing

    0 %

    p/st

    31.12.2018

    ex 8529 10 80

    60

    Filters, excluding surface acoustic wave filters, for a center frequency of 485 MHz or more but not more than 1 990 MHz with an insertion loss of not more than 3,5 dB, contained in a housing

    0 %

    p/st

    31.12.2018

    ex 8529 10 80

    70

    Ceramic filters

    — with an applicable frequency range of 10 kHz or more but no more than 100 MHz

    — with a housing of ceramic plates provided with electrodes

    of a kind used in electrical-mechanical transducer or resonator in audio visual and communication equipment

    0 %

    p/st

    31.12.2019

     (7)ex 8529 90 65

    15

    Electronic assembly comprising at least

    — a printed circuit

    — processors for multi-media applications and video signal processing

    — FPGA (Field Programmable Gate Array)

    — Flash memory

    — operating memory

    — HDMI, VGA, USB and RJ-45 interfaces

    — sockets and plugs for connecting a LCD-monitor, a LED lighting and a control panel

    0 %

    p/st

    31.12.2020

    ex 8529 90 65

    ex 8548 90 90

    30

    44

    Parts of TV-apparatus, having micro-processor and video-processor functions, comprising at least a micro-controller and a video-processor, mounted on a leadframe and contained in a plastic housing

    0 %

    p/st

    31.12.2018

    ex 8529 90 65

    45

    Satellite radio receiver module transforming satellite high frequency signals to digital audio coded signal, for use in the manufacture of products falling within heading 8527  (1)

    0 %

    p/st

    31.12.2019

    ex 8529 90 65

    50

    Tuner transforming high-frequency signals into mid-frequency signals, for use in the manufacture of products falling under heading 8528  (1)

    0 %

    p/st

    31.12.2016

     (7)ex 8529 90 65

    65

    Printed circuit board for distributing supply voltage and control signals directly to a control circuit on a TFT glass panel of a LCD module

    0 %

    p/st

    31.12.2020

    ex 8529 90 65

    70

    Unit driver consisting of an electronic integrated circuit and a flexible printed circuit, for use in the manufacture of LCD modules (1)

    0 %

    p/st

    31.12.2016

    ex 8529 90 65

    75

    Modules comprising at least semiconductor chips for:

    — the generation of driving signals for pixel addressing, or

    — driving addressing pixels

    0 %

    p/st

    31.12.2017

    ex 8529 90 65

    80

    Tuner transforming high-frequency signals into digital signal, for use in the manufacture of products falling under heading 8527  (1)

    0 %

    -

    31.12.2019

     (7)ex 8529 90 92

    ex 8548 90 90

    15

    60

    LCD modules,

    — solely consisting of one or more TFT glass or plastic cells,

    — not combined with touch screen facilities,

    — with one or more printed circuits boards with control electronics for pixel addressing only,

    — with or without backlight unit, and

    — with or without inverters

    0 %

    p/st

    31.12.2018

     (7)ex 8529 90 92

    25

    LCD modules, not combined with touch screen facilities, solely consisting of:

    — one or more TFT glass or plastic cells,

    — a die cast heat sink,

    — a backlight unit,

    — one printed circuit board with micro controller, and

    — LVDS (Low Voltage Differential Signalling) interface,

    for use in the manufacture of radios for motor vehicles (1)

    0 %

    p/st

    31.12.2020

    ex 8529 90 92

    32

    Optical unit for video projection, comprising a colour separation system, a positioning mechanism and lenses, for use in the manufacture of products falling within heading 8528  (1)

    0 %

    p/st

    31.12.2018

     (7)ex 8529 90 92

    35

    LCD modules with:

    — a diagonal measurement of the screen of 14,5 cm or more but not more than 25,5 cm,

    — a LED backlight,

    — a printed circuit board with EPROM, microcontroller, timing controller, LIN bus driver module and other active and passive components,

    — an 8 pin plug for power supply and 4- pin LVDS interface,

    — whether or not in a housing,

    for permanent incorporation or permanent mounting into motor vehicles of chapter 87

    0 %

    -

    31.12.2020

     (7)ex 8529 90 92

    36

    LCD module with:

    — a diagonal measurement of the screen of 14,5 cm or more but not more than 20,3 cm,

    — or without a touch screen,

    — an LED backlight,

    — a printed circuit board with EEPROM, microcontroller, LVDS receiver and other active and passive components,

    — a 12 pin plug for power supply and CAN and LVDS interfaces,

    — in a housing with monitor and other control functions,

    suitable for installation in motor vehicles of chapter 87

    0 %

    -

    31.12.2020

     (7)ex 8529 90 92

    37

    Fastening and covering ledges of aluminium alloy containing:

    — silicon and magnesium,

    — with a length of 300 mm or more but not more than 2 200 mm,

    specifically shaped for use in the manufacture of TV sets (1)

    0 %

    -

    31.12.2020

    ex 8529 90 92

    40

    Assembly comprising prisms, digital micromirror device (DMD) chips and electronic control circuits, for the manufacture of television projection equipments or video projectors (1)

    0 %

    p/st

    31.12.2018

    ex 8529 90 92

    41

    Digital micromirror device (DMD)-chips, for use in the manufacture of video projectors (1)

    0 %

    p/st

    31.12.2018

    ex 8529 90 92

    42

    Aluminium heat sinks and cooling fins, for maintaining the operating temperature of transistors and integrated circuits, for use in the manufacture of products falling within heading 8527 or 8528  (1)

    0 %

    p/st

    31.12.2018

    ex 8529 90 92

    43

    Plasma display module incorporating only address and display electrodes, with or without driver and/or control electronics for pixel address only and with or without a power supply

    0 %

    p/st

    31.12.2018

    ex 8529 90 92

    45

    Integrated circuit package with TV reception functionality containing a channel decoder die, tuner die, power management die, GSM filters and discrete as well as embedded passive circuit elements for reception of digitally broadcasting videosignals of DVB-T and DVB-H formats

    0 %

    p/st

    31.12.2018

    ex 8529 90 92

    47

    Area image sensors (‘progressive scan’ Interline CCD-Sensor or CMOS-Sensor) for digital video cameras in the form of analogue or digital, monolithic integrated circuit with pixels of not more than 12 μm × 12 μm in monochromic version with microlenses applied to each individual pixel (microlens array) or in polychromic version with a colour filter, whether or not with a lenslet (micro lens) array with one lenslet mounted on each individual pixel

    0 %

    p/st

    31.12.2019

    ex 8529 90 92

    ex 8536 69 90

    49

    83

    AC socket with a noise filter, composed of:

    — AC socket (for power cord connection) of 230 V,

    — integrated noise filter composed of capacitors and inductors,

    — cable connector for connecting an AC socket with the PDP (Plasma display panel) power supply unit,

    whether or not equipped with a metal support, which joins the AC socket to the PDP TV set

    0 %

    p/st

    31.12.2019

     (7)ex 8529 90 92

    50

    Colour LCD display panel for LCD monitors of heading 8528 :

    — with a diagonal measurement of the screen of 14,48 cm or more but not more than 31,24 cm,

    — with backlight, micro-controller,

    — with a CAN (Controller area network)-controller with LVDS (Low-voltage differential signalling) interface and CAN/power supply socket or with an APIX (Automotive Pixel Link) controller with APIX interface,

    — in a housing with or without a heat sink at the back of the housing,

    — without a signal-processing module,

    for use in the manufacture of vehicles of chapter 87 (1)

    0 %

    p/st

    31.12.2020

    ex 8529 90 92

    55

    OLED modules, consisting of one or more TFT glass or plastic cells, containing organic material, not combined with touch screen facilities and one or more printed circuit boards with control electronics for pixel addressing, of a kind used in the manufacture of TV sets and monitors

    0 %

    p/st

    31.12.2019

    ex 8529 90 92

    65

    OLED display consisting of:

    — the organic layer with organic LEDs,

    — two conductive layers on electron transfer and electron holes,

    — layers of transistors (TFT) with resolution of 1 920 x 1 080

    — anode and cathode for power supply of organic diodes,

    — RGB filter,

    — glass or plastic protective layer,

    — without the electronics for pixel addressing,

    for use in the manufacture of goods of headings 8528  (1)

    0 %

    p/st

    31.12.2019

    ex 8529 90 92

    70

    Rectangular fastening and covering frame:

    — of an aluminium alloy containing silicon and magnesium,

    — with a length of 500 mm or more but not more than 2 200 mm,

    — with a width of 300 mm or more but not more than 1 500 mm,

    of a kind used for the production of TV sets

    0 %

    p/st

    31.12.2017

    ex 8531 80 95

    40

    Electro-accoustic transducer

    0 %

    p/st

    31.12.2018

    ex 8535 90 00

    20

    Printed circuit board in the form of plates consisting of isolating material with electrical connections and solder points, for use in the manufacture of back light units for LCD modules (1)

    0 %

    p/st

    31.12.2018

     (7)ex 8535 90 00

    ex 8536 50 80

    30

    83

    Semiconductor module switch in a casing:

    — consisting of an IGBT transistor chip and a diode chip on one or more lead frames,

    — for a voltage of 600 V or 1 200 V

    0 %

    p/st

    31.12.2020

    ex 8536 30 30

    11

    Thermo-electric switch with a cut-off current of 50 A or more, comprising a snap action switch, for direct mounting on an electric motor coil, contained in a hermetically sealed housing

    0 %

    p/st

    31.12.2018

     (7)ex 8536 41 90

    40

    A power relay with:

    — an electromechanical switching function,

    — a load current of 3 amperes or more but not exceeding 16 amperes,

    — a coil voltage of 5 volts or more but not exceeding 24 volts,

    — a distance between the connector pins of the load circuit not more than 12,5 mm

    0 %

    p/st

    31.12.2018

     (7)ex 8536 49 00

    30

    Relays with:

    — a nominal voltage of 12 V DC

    — an allowable voltage of not more than 16 V DC

    — a coil resistance at 20 °C of 26, 7 Ohm (± 10 %)

    — a pick-up voltage at 60 °C of not more than 8,5 V

    — a drop-out voltage at 20 °C of 1 V or more

    — a nominal operating power at 20 °C of 5,4 Watts

    — a switching voltage of not more than 400 V DC

    — a permanent current-carrying capacity of not more than 120 A

    for use in the manufacture of batteries for electric vehicles (1)

    0 %

    -

    31.12.2020

    ex 8536 49 00

    91

    Thermal relays contained in a hermetically sealed glass cartridge of not more than 35 mm in length excluding wires, with a maximum leakage rate of 10-6 cm3 He/sec at one bar in the temperature range 0 °C to 160 °C, to be incorporated into compressors for refrigerating equipment (1)

    0 %

    p/st

    31.12.2018

    ex 8536 50 11

    31

    Switch of the printed circuit mount type, operating at a force of 4,9 N (± 0,9 N), contained in a housing

    0 %

    p/st

    31.12.2018

    ex 8536 50 11

    32

    Mechanical tact switch for connecting electronic circuits, operating at a voltage of not more than 60V and at a current strength of not more than 50mA, for use in the manufacture of products of headings 8521 or 8528  (1)

    0 %

    p/st

    31.12.2018

    ex 8536 50 19

    91

    Hall effect switch, comprising 1 magnet, 1 Hall effect sensor and 2 capacitors, contained in a housing with 3 connections

    0 %

    p/st

    31.12.2018

    ex 8536 50 19

    ex 8536 50 80

    93

    97

    Devices, having adjustable controller and switching functions, comprising one or more monolithic integrated circuits whether or not combined with semiconductor elements, mounted together on a leadframe and contained in a plastic housing

    0 %

    p/st

    31.12.2018

    ex 8536 50 80

    81

    Mechanical speed governer switches for connecting electrical circuits, with:

    — a voltage of 240 V or more but not more than 250 V,

    — an amperage of 4 A or more but not more than 6 A,

    for use in the manufacture of machines falling within heading 8467  (1)

    0 %

    p/st

    31.12.2019

    ex 8536 50 80

    82

    Mechanical switches for connecting electrical circuits, with:

    — a voltage of 240 V or more but not more than 300 V,

    — an amperage of 3 A or more but not more than 15 A,

    for use in the manufacture of machines falling within heading 8467  (1)

    0 %

    p/st

    31.12.2019

    ex 8536 50 80

    93

    Switch unit for coaxial cable, comprising 3 electromagnetic switches, with a switching time of not more than 50 ms and an actuating current of not more than 500 mA at a voltage of 12 V

    0 %

    p/st

    31.12.2018

    ex 8536 50 80

    98

    Mechanical push-button switch for connecting electronic circuits, operating at a voltage of 220 V or more but not more than 250 V and at a current strength of not more than 5 A, for use in the manufacture of products of headings 8521 or 8528  (1)

    0 %

    p/st

    31.12.2018

    ex 8536 69 90

    51

    SCART type connectors, built into a plastic or metal housing, with 21 pins in 2 rows, for use in the manufacture of products falling within headings 8521 and 8528  (1)

    0 %

    p/st

    31.12.2017

    ex 8536 69 90

    81

    Pitch connector for use in the manufacture of LCD television reception apparatus (1)

    0 %

    p/st

    31.12.2017

    ex 8536 69 90

    82

    Modular socket or plug for local area networks, whether or not combined with other sockets, integrating at least:

    — a pulse transformer, including a wide-band ferrite core,

    — a common mode coil,

    — a resistor,

    — a capacitor,

    for use in the manufacture of products falling within headings 8521 or 8528  (1)

    0 %

    p/st

    31.12.2019

     (7)ex 8536 69 90

    84

    Universal serial bus (USB) socket or plug in a single or multiple form for connecting with other USB devices, for use in the manufacture of goods falling within headings 8521 or 8528  (1)

    0 %

    p/st

    31.12.2020

    ex 8536 69 90

    85

    Socket or plug, built into a plastic or metal housing, with no more than 96 pins, for use in the manufacture of products falling within headings 8521 or 8528  (1)

    0 %

    p/st

    31.12.2016

    ex 8536 69 90

    86

    High-Definition Multimedia Interface (HDMI) type socket or plug, built into a plastic or metal housing, with 19 pins or 20 pins in 2 rows, for use in the manufacture of products falling within headings 8521 or 8528  (1)

    0 %

    p/st

    31.12.2016

    ex 8536 69 90

    87

    D-Subminiature (D-sub) type socket or plug, built into a plastic or metal housing, with 15 pins in 3 rows, for use in the manufacture of products falling within headings 8521 or 8528  (1)

    0 %

    p/st

    31.12.2016

    ex 8536 69 90

    88

    Secure Digital (SD), CompactFlash, ‘Smart Card’ and ‘Common interface modules (cards)’ female connectors and interfaces, of a kind used for soldering on printed circuit boards, for connecting electrical apparatus and circuits and switching or protecting electrical circuits with a voltage of not more than 1 000 V

    0 %

    p/st

    31.12.2017

    ex 8536 70 00

    10

    Optical socket, plug or connector, for use in the manufacture of goods falling within headings 8521 or 8528  (1)

    0 %

    p/st

    31.12.2016

    ex 8536 90 85

    92

    Metallic stamped frame with connections

    0 %

    p/st

    31.12.2018

    ex 8536 90 85

    ex 8544 49 93

    94

    10

    Elastomeric connector, of rubber or silicone, consisting of one or more conductor elements

    0 %

    p/st

    31.12.2018

    ex 8536 90 85

    97

    Secure Digital (SD) type memory card slot, push-push or push-pull type, for use in the manufacture of goods falling within headings 8521 or 8528  (1)

    0 %

    p/st

    31.12.2016

    ex 8537 10 91

    30

    Data processing and evaluation vehicle dashboard control module, operating through the CAN — bus protocol, containing at least:

    — microprocessor relays,

    — a stepper motor,

    — Electrically Erasable Programmable Read-Only (EEPROM) memory, and

    — other passive components (such as connectors, diodes, voltage stabilizer, resistors, capacitors, transistors),

    with a voltage of 13,5 V

    0 %

    p/st

    31.12.2017

    ex 8537 10 91

    40

    Electronic control units, manufactured according to class 2 of IPC-A-610E standard, with a main power input of 400 V AC, a logic power input of 24 V DC, equipped at least with:

    — a PCBA board(s) with logic and programmable circuits and other electronic parts as connectors, capacitors, coils or resistors,

    — contactors,

    — an automatic circuit breaker,

    — a fuse,

    — internal connecting cables,

    — a main power switch,

    — electrical connectors or cables for connecting external devices,

    — a metal casing with dimension of 370 x 300 x 80 mm or more, but not more than 570 x 420 x 125 mm,

    used for controlling and powering machines of a kind used for recycling or sorting of plastic, metal or glass packaging

    0 %

    p/st

    31.12.2018

    ex 8537 10 99

    30

    Motor bridge ICs without programmable memory consisting of:

    — one or more integrated circuits, not interconnected, on separate lead frames,

    — also with discrete Metal Oxide Field Effect Transistors (MOSFET) for controlling DC motors in cars

    — mounted in a plastic housing

    0 %

    p/st

    31.12.2018

    ex 8537 10 99

    40

    Electronic control unit for monitoring car vehicle tyre pressure comprising plastic box with printed circuit board inside and with or without metal holder, of:

    — a length of 50 mm or more, but not more than 120 mm,

    — a width of 20 mm or more but not more than 40 mm,

    — a height of 30 mm or more, but not more than 120 mm

    of a kind used in the manufacture of goods of Chapter 87

    0 %

    p/st

    31.12.2019

    ex 8537 10 99

    50

    Electronic control unit BCM (Body Control Module) comprising

    — plastic box with printed circuit board and metal holder,

    — with voltage of 9V or more, but not more than 16V,

    — able to control, evaluate and manage functions of assisting services in an automobile, at least wiper timing, window heating, interior lighting, seat belt reminder

    of a kind used in the manufacture of goods of Chapter 87

    0 %

    p/st

    31.12.2019

    ex 8537 10 99

    60

    Electronic assembly consisting of:

    — a microprocessor,

    — light-emitting diode (LED) or liquid crystal display (LCD) indicators,

    — electronic components mounted on a printed circuit,

    for use in the manufacture of built-in products of headings 8514 20 80 , 8516 50 00 and 8516 60 80  (1)

    0 %

    p/st

    31.12.2019

    ex 8537 10 99

    92

    Touch sensitive screen panel, consisting of a conductive grid between two glass or plastic plates or sheets, fitted with electric conductors and connectors

    0 %

    p/st

    31.12.2018

    ex 8537 10 99

    93

    Electronic control units for a voltage of 12 V, for use in the manufacture of vehicle mounted temperature control systems (1)

    0 %

    p/st

    31.12.2018

    ex 8537 10 99

    ex 8543 70 90

    94

    20

    Unit consisting of two junction field effect transistors contained in a dual lead frame housing

    0 %

    p/st

    31.12.2018

    ex 8538 90 99

    ex 8547 20 00

    30

    10

    Polycarbonate or acrylonitrile butadiene styrene covers and cases for steering pad switches whether or not coated on the outside with a scratch resistant paint

    0 %

    p/st

    31.12.2019

    ex 8538 90 99

    92

    Part of an electrothermal fuse, consisting of a tin coated copper wire attached to a cylindrical casing, the exterior dimensions of which do not exceed 5 mm × 48 mm

    0 %

    p/st

    31.12.2018

    ex 8538 90 99

    95

    Copper base plate, of a kind used as a heatsink in the manufacture of IGBT modules containing more components than IGBT chips and diodes with a voltage of 650 V or more but not more than 1 200 V (1)

    0 %

    p/st

    31.12.2018

    ex 8539 39 00

    20

    Cold cathode (CCFL) or external electrode (EEFL) fluorescent lamps, of a diameter of not more than 5 mm and with a length of more than 120 mm but not more than 1 570 mm

    0 %

    -

    31.12.2016

    ex 8540 11 00

    93

    Colour cathode-ray tube equipped with electron guns placed side by side (in-line technology), with a diagonal measurement of the screen of 79 cm or more

    0 %

    -

    31.12.2016

    ex 8540 20 80

    91

    Photomultiplier

    0 %

    -

    31.12.2016

    ex 8540 71 00

    20

    Continuous wave magnetron with a fixed frequency of 2 460 MHz, packaged magnet, probe output, for use in the manufacture of products falling within subheading 8516 50 00  (1)

    0 %

    -

    31.12.2018

    ex 8540 89 00

    91

    Displays in the form of a tube consisting of a glass housing mounted on a board the dimensions of which do not exceed 300 mm × 350 mm excluding leads. The tube contains one or more rows of characters or lines arranged in rows, each character or line consisting of fluorescent or phosphorescent elements. These elements are mounted on a metallised base which is covered with fluorescent substances or phosphorescent salts which give off light when bombarded with electrons

    0 %

    -

    31.12.2018

    ex 8540 89 00

    92

    Vacuum fluorescent display tube

    0 %

    -

    31.12.2018

    ex 8543 70 90

    30

    Amplifier, consisting of active and passive elements mounted on a printed circuit, contained in a housing

    0 %

    p/st

    31.12.2018

    ex 8543 70 90

    35

    Radio frequency (RF) modulator, operating with a frequency range of 43 MHz or more but not more than 870 MHz, capable of switching VHF and UHF signals, consisting of active and passive elements mounted on a printed circuit, contained in a housing

    0 %

    p/st

    31.12.2018

     (7)ex 8543 70 90

    40

    High-frequency amplifier comprising one or more integrated circuits and discrete capacitor chips on a metal flange in a housing

    0 %

    p/st

    31.12.2020

    ex 8543 70 90

    45

    Piezo-electric crystal oscillator with a fixed frequency, within a frequency range of 1,8 MHz to 67 MHz, contained in a housing

    0 %

    p/st

    31.12.2018

    ex 8543 70 90

    55

    Opto-electronic circuit comprising one or more light-emitting diodes (LEDs), whether or not equipped with an integrated driving circuit, and one photodiode with amplifier circuit, whether or not with an integrated logic gate arrays circuit or one or more light-emitting diodes and at least 2 photodiodes with an amplifier circuit, whether or not with an integrated logic gate arrays circuit or other integrated circuits, contained in a housing

    0 %

    p/st

    31.12.2018

    ex 8543 70 90

    60

    Oscillator, with a centre frequency of 20 GHz or more but not more than 42 GHz, consisting of active and passive elements not mounted on a substrate, contained in a housing

    0 %

    p/st

    31.12.2018

    ex 8543 70 90

    65

    Audio recording and reproducing circuit, capable of stereo audio data storage and simultaneous record and playback, comprising 2 or 3 monolithic integrated circuits mounted on a printed circuit or a lead frame, contained in a housing

    0 %

    p/st

    31.12.2018

    ex 8543 70 90

    80

    Temperature compensated oscillator, comprising a printed circuit on which are mounted at least a piezo-electric crystal and an adjustable capacitor, contained in a housing

    0 %

    p/st

    31.12.2018

    ex 8543 70 90

    85

    Voltage controlled oscillator (VCO), other than temperature compensated oscillators, consisting of active and passive elements mounted on a printed circuit, contained in a housing

    0 %

    p/st

    31.12.2018

     (7)ex 8543 70 90

    95

    Mobile telephone view and control module comprising of:

    — a mains power/CAN (Controller area network) output socket,

    — a universal serial bus (USB) and audio IN/OUT ports and

    — incorporating a video switching device for the interface of smart phone operating systems with the Media Orientated Systems Transport network (MOST),

    for use in the manufacture of vehicles of Chapter 87 (1)

    0 %

    p/st

    31.12.2020

    ex 8543 90 00

    20

    Stainless steel cathode in the form of a plate with a hanger bar, whether or not with plastic side strips

    0 %

    p/st

    31.12.2019

    ex 8543 90 00

    30

    Assembly of products falling within heading 8541 or 8542 mounted on a printed circuit, contained in a housing

    0 %

    p/st

    31.12.2018

    ex 8543 90 00

    40

    Part of an electrolysis device, consisting of a pan of nickel equipped with a wire mesh of nickel, fixed via ribs of nickel, and a pan of titanium equipped with a wire mesh of titanium, fixed via ribs of titanium, of which both pans are fixed together back to back

    0 %

    p/st

    31.12.2017

    ex 8544 20 00

    ex 8544 42 90

    ex 8544 49 93

    10

    20

    20

    PET/PVC insulated flexible cable with:

    — a voltage of not more than 60 V,

    — a current of not more than 1 A,

    — a heat resistance of not more than 105 °C,

    — individual wires of a thickness of not more than 0,1 mm (± 0,01 mm) and a width of not more than 0,8 mm (± 0,03 mm),

    — a distance between conductors of not more than 0,5 mm, and

    — a pitch (distance from centreline to centreline of conductors) of not more than 1,25 mm

    0 %

    -

    31.12.2018

     (7)ex 8544 20 00

    20

    Antenna connecting cable for the transmission of analogue radio (AM/FM) and GPS signals, containing:

    — a two-core coaxial cable,

    — two or more connectors,

    — 5 or more plastic clips for attachment to the dashboard

    of kind used in the manufacture of goods of Chapter 87

    0 %

    -

    31.12.2020

    ex 8544 30 00

    30

    Multi-measurement wire harness of a voltage of 5V or more but not more than 90 V capable of measuring some or all of the following;

    — a travel speed of not more than 24 km/h

    — a motor speed of not more than 4 500 rpm

    — hydraulic pressure of not more than 25 Mpa

    — mass of not more than 50 metric tonnes

    for use in the manufacture of vehicles of heading 8427  (1)

    0 %

    p/st

    31.12.2018

    ex 8544 30 00

    ex 8544 42 90

    40

    40

    Wire harness of the steering system with an operating voltage of 12 V, equipped with connectors on both sides, having at least 3 plastic anchor clamps for mounting on a motor vehicle steering box

    0 %

    p/st

    31.12.2019

     (7)ex 8544 30 00

    ex 8544 42 90

    60

    50

    Four-core connecting cable containing two female connectors for the transmission of digital signals from navigation and audio systems to a USB connector, of kind used in the manufacture of goods of Chapter 87

    0 %

    -

    31.12.2020

     (7)ex 8544 30 00

    70

    Multi-measurement wire harness:

    — of a voltage of 5 V or more but not more than 90 V,

    — capable of transmitting information

    for use in the manufacture of vehicles of heading 8711  (1)

    0 %

    p/st

    31.12.2019

    ex 8544 42 90

    10

    Data transmission cable capable of a bit rate transmission of 600 Mbit/s or more, with:

    — a voltage of 1,25 V (± 0,25 V)

    — connectors fitted at one or both ends, at least one of which contains pins with a pitch of 1 mm,

    — outer screening shielding,

    used solely for communication between LCD, PDP or OLED panel and video processing electronic circuits

    0 %

    p/st

    31.12.2018

    ex 8544 42 90

    30

    PET insulated electric conductor with:

    — 10 or 80 individual wires,

    — a length of 50 mm or more, but not more than 800 mm,

    — connector(s) and/or plug(s) fitted at one or both ends,

    for use in the manufacture of products falling within headings 8521 and 8528  (1)

    0 %

    -

    31.12.2017

    ex 8544 49 91

    10

    Insulated copper electrical wires:

    — with individual conductor wires of a diameter exceeding 0,51 mm.,

    — for a voltage of not more than 1 000 V,

    for use in the manufacture of automotive cable harnesses (1)

    0 %

    m

    31.12.2019

    ex 8545 19 00

    20

    Carbon electrodes, for use in the manufacture of zinc-carbon batteries (1)

    0 %

    p/st

    31.12.2018

     (7)ex 8545 90 90

    20

    Carbon fibre paper of a kind used for gas diffusion layers in fuel cell electrodes

    0 %

    -

    31.12.2020

    ex 8547 10 00

    10

    Insulated fitting of ceramics, containing by weight 90 % or more of aluminium oxide, metallised, in the form of a hollow cylindrical body of an external diameter of 20 mm or more but not more than 250 mm, for the manufacture of vacuum interrupters (1)

    0 %

    p/st

    31.12.2018

    ex 8548 10 29

    10

    Spent lithium-ion or nickel metal hydride electric accumulators

    0 %

    -

    31.12.2016

    ex 8548 90 90

    41

    Unit, consisting of a resonator operating within a frequency range of 1,8 MHz or more but not more than 40 MHz and a capacitor, contained in a housing

    0 %

    p/st

    31.12.2018

    ex 8548 90 90

    43

    Contact image sensor

    0 %

    p/st

    31.12.2018

     (7)ex 8548 90 90

    ex 9013 20 00

    48

    50

    Optical unit, consisting at least of a laser diode and a photodiode operating at a typical wavelength of 635 nm or more but not more than 815 nm

    0 %

    p/st

    31.12.2018

    ex 8548 90 90

    50

    Filters with a ferromagnetic core, used to suppress high frequency noise in electronic circuits, for the manufacture of TV sets and monitors of heading 8528  (1)

    0 %

    p/st

    31.12.2017

     (7)ex 8548 90 90

    65

    LCD modules,

    — solely consisting of one or more TFT glass or plastic cells,

    — combined with touch screen facilities,

    — with one or more printed circuits boards with control electronics for pixel addressing only,

    — with or without backlight unit, and

    — with or without inverters

    0 %

    p/st

    31.12.2018

    ex 8704 23 91

    20

    Motor chassis with a self-ignition capacity of at least 8 000 cm3, fitted with a cabin on either 3, 4 or 5 wheels having a wheelbase of at least 480 cm, not containing working machinery, to be built into special purpose motor vehicles with a width of at least 300 cm (1)

    0 %

    -

    31.12.2017

    ex 8708 30 10

    10

    Brake unit assembly comprising

    — electric control brake,

    — stroke sensor,

    — VDC (vehicle dynamic control), and

    — backup power source

    for use in the manufacture of vehicles (1)

    0 %

    p/st

    31.12.2019

     (7)ex 8708 30 91

    10

    Drum type parking brake:

    — operating within the service brake disk,

    — with a diameter of 170 mm or more but not more than 175 mm,

    for use in the manufacture of motor vehicles (1)

    0 %

    p/st

    31.12.2020

    ex 8708 30 91

    20

    Non-asbestos organic brake pads with friction material mounted to the band steel back plate for use in the manufacture of goods of Chapter 87 (1)

    0 %

    p/st

    31.12.2019

    ex 8708 30 91

    30

    Body of disc type brake in BIR (‘Ball in Ramp’) or EPB (‘Electronic Parking Brake’) version containing functional and mounting openings and guide grooves, of a kind used in the manufacture of goods of Chapter 87

    0 %

    p/st

    31.12.2019

     (7)ex 8708 30 91

    40

    Ductile cast iron brake caliper jaw, of a kind used in the manufacture of goods of Chapter 87

    0 %

    p/st

    31.12.2020

     (7)ex 8708 50 99

    10

    Transmission shaft in carbon fibre reinforced plastics consisting of a unique piece without any joint in the middle

    — of a length of 1 m or more but not more than 2 m,

    — of a weight of 6 kg or more but not more than 9 kg

    0 %

    p/st

    31.12.2020

     (7)ex 8708 80 35

    10

    Upper strut insulator containing

    — a metal holder with three mounting screws, and

    — a rubber bump

    of a kind used in the manufacture of goods of Chapter 87

    0 %

    p/st

    31.12.2020

     (7)ex 8708 80 91

    10

    Rear chassis arm with a protective plastic label equipped with two metal casings with pressed-in rubber silent blocks, of kind used in the manufacture of goods of Chapter 87

    0 %

    p/st

    31.12.2020

     (7)ex 8708 80 91

    20

    Rear chassis arm equipped with a ball pivot and metal casing with a pressed-in rubber silent block, of kind used in the manufacture of goods of Chapter 87

    0 %

    p/st

    31.12.2020

    ex 8708 91 35

    10

    Aluminium cooler using compressed air with a ribbed design of a kind used in the manufacture of goods of Chapter 87

    0 %

    p/st

    31.12.2019

    ex 8708 94 35

    20

    Rack steering gear in aluminium housing with homokinetic hinges of a kind used in the manufacture of goods of Chapter 87

    0 %

    p/st

    31.12.2019

     (7)ex 8708 95 10

    ex 8708 95 99

    10

    20

    Inflatable safety cushion of high strength polyamide fibre

    — sewn

    — folded into three-dimensional packing form, fixed by thermal forming

    0 %

    p/st

    31.12.2020

     (7)ex 8708 95 10

    ex 8708 95 99

    20

    30

    Inflatable safety cushion of high strength polyamide fibre:

    — sewn,

    — folded,

    — with three-dimensionally applied silicone bonding for air bag cavity forming and load-regulated air bag sealing

    — suitable for cool inflator technology

    0 %

    p/st

    31.12.2020

     (7)ex 8708 95 99

    10

    Front passenger airbag composed of:

    — a metal housing with at least six mounting brackets,

    — an embedded safety cushion,

    — a cartridge filled with compressed gas

    of a kind used in the manufacture of goods of Chapter 87

    0 %

    p/st

    31.12.2020

    ex 8708 99 97

    20

    Metal housing caps for incorporation into balancing-arms or spherical bearings used in the suspension systems for the front wheels of motor vehicles (1)

    0 %

    p/st

    31.12.2016

     (7)ex 8714 10 90

    10

    Inner tubes,

    — of SAE1541 carbon steel

    — with a hard chromium layer of 20 μm (+ 15 μm/-5 μm)

    — having a wall thickness of 1,45 mm or more, but not more than 1,5 mm

    — having an elongation at break of 15 %

    — slotted

    of a kind used for the production of motorcycle fork rods

    0 %

    p/st

    31.12.2020

    ex 8714 91 10

    ex 8714 91 10

    ex 8714 91 10

    23

    33

    70

    Frame, constructed from aluminium or aluminium and carbon fibres, for the use in the manufacture of bicycles (1)

    0 %

    -

    31.12.2018

     (7)ex 8714 91 30

    ex 8714 91 30

    ex 8714 91 30

    24

    34

    71

    Front forks with aluminium legs, for use in the manufacture of bicycles (1)

    0 %

    -

    31.12.2018

    ex 8803 30 00

    50

    Pre-formed helicopter rotor shafts:

    — of circular cross-section,

    — with a length of 1 249,68 mm or more, but not more than 1 496,06 mm,

    — of an external diameter of 81,356 mm or more, but not more than 82,2198 mm,

    — swaged on both ends to an external diameter of 63,8683 mm or more, but not more than 66,802 mm,

    — heat treated according to standards MIL-H-6088, AMS 2770 or AMS 2772

    0 %

    p/st

    31.12.2016

    ex 9001 10 90

    10

    Image reverser made up from an assembly of optical fibres

    0 %

    -

    31.12.2018

    ex 9001 10 90

    30

    Polymer optical fibre with:

    — a poly(methyl methacrylate) core,

    — a cladding of fluorinated polymer,

    — a diameter of not more than 3,0 mm, and

    — a length of more than 150 m,

    of a kind used in the manufacture of polymer fibre cables

    0 %

    -

    31.12.2016

    ex 9001 20 00

    10

    Material consisting of a polarising film, whether or not on rolls, supported on one or both sides by transparent material, whether or not with an adhesive layer, covered on one side or on both sides with a release film

    0 %

    -

    31.12.2017

    ex 9001 20 00

    ex 9001 90 00

    20

    55

    Optical, diffuser, reflector or prism sheets, unprinted diffuser plates, whether or not possessing polarising properties, specifically cut

    0 %

    -

    31.12.2018

     (7)ex 9001 50 41

    ex 9001 50 49

    20

    20

    Round organic uncut corrective eyeglass lens, finished on both sides:

    — of a diameter of 4,9 cm or more but not more than 8,2 cm,

    — of a height of 0,5 cm or more but not more than 1,2 cm, measured when the lens is laid on a flat surface from the horizontal plane to the lens front surface optical centre

    of a kind used to be processed in order to be adapted to a pair of glasses

    1,45%

    -

    31.12.2019

     (7)ex 9001 50 80

    20

    Round organic uncut corrective eyeglass lens, finished on one side:

    — of a diameter of 5,9 cm or more but not more than 8,5 cm

    — of a height of 1,2 cm or more but not more than 2,7 cm, measured when the lens is laid on a flat surface from the horizontal plane to the lens front surface optical centre

    of a kind used to be processed in order to be adapted to a pair of glasses

    0 %

    -

    31.12.2019

    ex 9001 90 00

    25

    Unmounted optical elements made from moulded infrared transmitting chalcogenide glass, or a combination of infrared transmitting chalcogenide glass and another lens material

    0 %

    -

    31.12.2017

    ex 9001 90 00

    35

    Rear projection screen, comprising a lenticular plastic plate

    0 %

    p/st

    31.12.2018

    ex 9001 90 00

    45

    Rod of neodymium-doped yttrium-aluminium garnet (YAG) material, polished at both ends

    0 %

    p/st

    31.12.2018

    ex 9001 90 00

    60

    Reflector or diffuser sheets in rolls

    0 %

    -

    31.12.2018

    ex 9001 90 00

    65

    Optical film with a minimum of 5 multi-layer structures, including a back side reflector, a front side coating and a contrast filter with a pitch of not more than 0,65 μm, for use in the manufacture of front projection screens (1)

    0 %

    -

    31.12.2019

    ex 9001 90 00

    70

    Poly(ethylene terephthalate) film with a thickness of less than 300 μm according to ASTM D2103, having on one side prisms of acrylic resin with a prism angle of 90o and a prism pitch of 50 μm

    0 %

    -

    31.12.2016

    ex 9001 90 00

    75

    Front filter comprising glass panels with special printing and film coating, for use in the manufacture of plasma display modules (1)

    0 %

    p/st

    31.12.2017

     (7)ex 9001 90 00

    85

    Light guide panel made of poly(methyl methacrylate):

    — whether or not cut,

    — whether or not printed,

    for use in the manufacture of backlight units for flat screen TVs (1)

    0 %

    -

    31.12.2020

    ex 9002 11 00

    10

    Adjustable lens unit, having a focal length of 90 mm or more but not more than 180 mm and comprising a combination of between 4 and 8 glass or methacrylic lenses with a diameter of 120 mm or more but not more than 180 mm, each lens coated on at least one side with a magnesium fluoride layer, for use in the manufacture of video projectors (1)

    0 %

    -

    31.12.2018

    ex 9002 11 00

    20

    Lenses

    — measuring not more than 80 mm x 55 mm x 50 mm,

    — with a resolution of 160 lines/mm or better, and

    — with a zoom ratio of 18 times,

    of a kind used for the production of visualizers or live image cameras

    0 %

    -

    31.12.2017

    ex 9002 11 00

    30

    Lenses

    — measuring not more than 180 mm x 100 mm x 100 mm at a maximum focal length of more than 200 mm,

    — with a resolution of 130 lines/mm or better, and

    — with a zoom ratio of 18 times

    of a kind used for the production of visualizers or live image cameras

    0 %

    -

    31.12.2017

    ex 9002 11 00

    40

    Lenses

    — measuring not more than 125 mm x 65 mm x 65 mm,

    — with a resolution of 125 lines/mm or better, and

    — with a zoom ratio of 16 times

    of a kind used for the production of visualizers or live image cameras

    0 %

    -

    31.12.2017

    ex 9002 11 00

    50

    Lens unit:

    — having a focal length of 25 mm or more but not more than 150 mm,

    — consisting of glass or plastic lenses, with a diameter of 60 mm or more but not more than 190 mm

    0 %

    -

    31.12.2018

    ex 9002 11 00

    70

    Lenses

    — measuring not more than 180 mm×100 mm×100 mm at a maximum focal length of more than 200 mm,

    — with an etendue of 7 steradian mm2 or better, and

    — with a zoom ratio of 16 times

    of a kind used for the production of visualizers or live image cameras

    0 %

    -

    31.12.2017

    ex 9002 11 00

    80

    Lens assembly with:

    — a field of view range of 58,5 deg or more, but not more than 194 deg,

    — a focal length of 1,16 mm or more, but not more than 3,88 mm,

    — a relative aperture of F/2.0 or more but not more than 2.6,

    — a diameter of 17 mm or more but not more than 18,5 mm,

    for use in the manufacture of CMOS automotive cameras (1)

    0 %

    -

    31.12.2019

    ex 9002 20 00

    10

    Filter, consisting of a plastic polarising membrane, a glass plate and a transparent protective film, mounted on a metal frame, for use in the manufacture of products falling within heading 8528  (1)

    0 %

    -

    31.12.2018

    ex 9002 90 00

    20

    Lens, mounted, having a fixed focal length of 3,8 mm (± 0,19 mm) or 8 mm (± 0,4 mm), with a relative aperture of F2.0 and a diameter of not more than 33 mm, for use in the manufacture of charged-coupled (CCD) cameras (1)

    0 %

    p/st

    31.12.2018

    ex 9002 90 00

    30

    Optical unit, comprising 1 or 2 rows of optical glass fibres in the form of lenses and with a diameter of 0,85 mm or more but not more than 1,15 mm, embedded between 2 plastic plates

    0 %

    p/st

    31.12.2018

    ex 9002 90 00

    40

    Mounted lenses made from infrared transmitting chalcogenide glass, or a combination of infrared transmitting chalcogenide glass and another lens material

    0 %

    p/st

    31.12.2017

    ex 9012 90 90

    10

    Energy filters, to be installed on the column of electron microscopes

    0 %

    p/st

    31.12.2016

    ex 9013 20 00

    10

    Carbon dioxide laser, stimulated by high frequency, having an output power of 12 W or more, but not more than 200 W

    0 %

    p/st

    31.12.2018

    ex 9013 20 00

    20

    Laser head assemblies for use in the manufacture of measuring or checking machines for semiconductor wafers or devices (1)

    0 %

    p/st

    31.12.2018

    ex 9013 20 00

    30

    Laser for use in the manufacture of measuring or checking machines for semiconductor wafers or devices (1)

    0 %

    p/st

    31.12.2018

     (7)ex 9013 20 00

    40

    Red, blue or green laser module

    — consisting of one or more laser diodes on a metal submount with optical elements and electric connectors in a hermetic housing,

    — with or without mirrors or a Periodically Poled Lithium Niobate (PPLN) crystal,

    — with an optical output power of 1W or more but not more than 50W,

    — only capable of emitting central wavelengths within an exact range depending on the colour: Red: 600 nm or more but not more than 665 nm; Green: 515 nm or more but not more than 560 nm; Blue: 435 nm or more but not more than 475 nm,

    — and operational in two or more closely spaced wavelength bins mutually parted by 1nm or more but not more than 5nm

    0 %

    p/st

    31.12.2020

    ex 9013 80 90

    10

    Electronic semiconductor micro-mirror in a housing suitable for the automatic printing of conductor boards, mainly consisting of a combination of:

    — one or more monolithic application-specific integrated circuits (ASIC),

    — one or more microelectromechanical sensor elements (MEMS) manufactured with semiconductor technology, with mechanical components arranged in three-dimensional structures on the semiconductor material

    of a kind used for incorporation into products of Chapters 84-90 and 95

    0 %

    p/st

    31.12.2019

    ex 9014 10 00

    30

    Electronic compass, as a geomagnetic sensor, in a housing (e.g. CSWLP, LGA, SOIC) suitable for fully automated printed circuit board (PCB) assembly, with the following main components:

    — a combination of one or more application-specific integrated circuits (ASIC) and

    — one or more micro-electromechanical sensors (MEMS) manufactured with semiconductor technology, with mechanical components arranged in three-dimensional structures on the semiconductor material,

    of a kind used in the manufacture of products falling in chapters 84-90 and 94

    0 %

    p/st

    31.12.2018

    ex 9022 90 00

    10

    Panels for x-ray apparatus (x-ray flat panel sensors/x-ray sensors) consisting of a glass plate with a matrix of thin-film transistors, covered with a film of amorphous silicon, coated with a scintillator layer of caesium iodide and a metallised protective layer, or coated with a layer of amorphous selenium

    0 %

    p/st

    31.12.2018

    ex 9025 80 40

    30

    Electronic barometric semiconductor pressure sensor in a housing, mainly consisting of

    — a combination of one or more monolithic application-specific integrated circuits (ASIC) and

    — at least one or more microelectromechanical sensor elements (MEMS) manufactured with semiconductor technology, with mechanical components arranged in three-dimensional structures on the semiconductor material

    0 %

    p/st

    31.12.2018

    ex 9025 80 40

    40

    Electronic temperature, atmospheric pressure and humidity sensor (environmental sensor) in a housing suitable for the automatic printing of conductor boards, mainly consisting of a combination of:

    — one or more monolithic application-specific integrated circuits (ASIC),

    — one or more microelectromechanical sensor elements (MEMS) manufactured with semiconductor technology, with mechanical components arranged in three-dimensional structures on the semiconductor material

    of a kind used for incorporation into products of Chapters 84-90 and 95

    0 %

    p/st

    31.12.2019

    ex 9027 10 90

    10

    Sensor element for gas or smoke analysis in motor vehicles, essentially consisting of a zirconium-ceramic element in a metal housing

    0 %

    -

    31.12.2018

    ex 9029 10 00

    20

    Device for measuring wheel speed in vehicles (semi-conductor wheel speed sensor), consisting of:

    — a monolithic integrated circuit in a housing, and

    — one or more discrete SMD capacitors connected in parallel to the integrated circuit

    — whether or not with integrated permanent magnets

    for detecting the movement of a pulse generator

    0 %

    p/st

    31.12.2018

     (7)ex 9029 10 00

    ex 9031 80 38

    30

    80

    Speed sensor using the Hall effect for measuring wheels rotation in a motor vehicle equipped with plastic housing and attached to connecting cable with a joining connector and mounting holders of a kind used in the manufacture of goods of Chapter 87

    0 %

    p/st

    31.12.2019

    ex 9029 20 31

    ex 9029 90 00

    10

    20

    Clustered instrument panel with the microprocessor control board, stepping motors and LED indicators showing at least:

    — speed,

    — engine revolutions,

    — engine temperature,

    — the fuel level

    communicating via CAN-BUS and K-LINE protocols, of a kind used in the manufacture of goods of Chapter 87

    0 %

    p/st

    31.12.2019

    ex 9031 80 34

    30

    Apparatus for measuring the angle and direction of rotation of motor vehicles, consisting of at least one yaw rate sensor in the form of a monocrystalline quartz, whether or not combined with one or more measuring sensors, the whole contained in a housing

    0 %

    p/st

    31.12.2018

    ex 9031 80 34

    40

    Semiconducting camshaft position sensor, with:

    — a moulded plastic outer casing,

    — an operational voltage of the control unit of 4,5 or more, but not more than 7 VCC,

    for use in the manufacture of vehicles of Chapter 87 (1)

    0 %

    p/st

    31.12.2019

    ex 9031 80 34

    50

    Programmable dual linear Hall sensor

    — consisting of two non-electrically connected integrated circuits, a top die and a bottom die,

    — positioned on the top and bottom of a lead frame,

    — in a semiconductor housing,

    for use as a means for measuring angles, positions and currents in cars

    0 %

    p/st

    31.12.2019

    ex 9031 80 38

    10

    Acceleration measurement device for automotive applications, comprising one or more active and/or passive elements and one or more sensors, the whole contained in a housing

    0 %

    p/st

    31.12.2018

    ex 9031 80 38

    20

    Electronic semiconductor accelerometer in a housing, mainly consisting of

    — a combination of one or more monolithic application-specific integrated circuits (ASIC) and

    — one or more microelectromechanical sensor elements (MEMS) manufactured with semiconductor technology, with mechanical components arranged in three-dimensional structures on the semiconductor material

    of a kind used for incorporation into products under Chapter 84-90 and 95

    0 %

    p/st

    31.12.2018

    ex 9031 80 38

    30

    Combined electronic acceleration- and geomagnetic sensor, in a housing suitable for the automatic printing of conductor boards, mainly consisting of a combination of:

    — one or more monolithic application-specific integrated circuits (ASIC) and

    — one or more microelectromechanical sensor elements (MEMS) manufactured with semiconductor technology, with mechanical components arranged in three-dimensional structures on the semiconductor material,

    of a kind used for incorporation into products under Chapter 84-90 and 95

    0 %

    p/st

    31.12.2019

    ex 9031 80 38

    40

    Electronic accelerometer and magnetic field and angular-speed detector (orientation-sensor) in a housing suitable for the automatic printing of conductor boards, mainly consisting of an inseparable combination of:

    — one or more monolithic application-specific integrated circuits (ASIC)

    — one or more microelectromechanical sensor elements (MEMS) manufactured with semiconductor technology, with mechanical components arranged in three-dimensional structures on the semiconductor material,

    of a kind used for incorporation into products of Chapters 84-90 and 95

    0 %

    p/st

    31.12.2019

    ex 9031 80 38

    50

    Gyroscopic sensor for measuring lateral acceleration of the vehicle vertical axis comprising

    — a piezoelectric crystal for generating an electrical potential during deformation and

    — a plastic box with metal holder

    of a kind used in the manufacture of goods of Chapter 87

    0 %

    p/st

    31.12.2019

     (7)ex 9031 80 38

    70

    Acceleration sensor, printed circuit board and connector, moulded together in plastic, for monitoring acceleration ‘G’ and providing the values for further evaluation of triggering the airbags, of a kind used in the manufacture of goods of Chapter 87

    0 %

    p/st

    31.12.2019

    ex 9031 80 98

    30

    Functional Test Machine for calibrating and image quality testing lenses in automotive cameras

    0 %

    p/st

    31.12.2019

    ex 9031 90 85

    20

    Assembly for a laser align sensor, in the form of a printed circuit comprising optical filters and a charge-coupled image (CCD) sensor, the whole contained in a housing

    0 %

    p/st

    31.12.2018

    ex 9032 89 00

    20

    Automotive airbag shock-sensor, comprising a contact capable of switching a current of 12 A at a voltage of 30 V, having a typical contact resistance of 80 mOhm

    0 %

    p/st

    31.12.2018

    ex 9032 89 00

    30

    Electronic controller of electric power steering (EPS controller)

    0 %

    p/st

    31.12.2018

    ex 9032 89 00

    40

    Digital valve controller for controlling liquids and gases

    0 %

    p/st

    31.12.2017

     (7)ex 9401 90 80

    10

    Ratchet disk of a kind used in the manufacture of reclining car seats

    0 %

    p/st

    31.12.2020

    ex 9401 90 80

    20

    Sidemember with a thickness of 0,8 or more but not more than 3,0 mm, used in the manufacture of reclining car seats (1)

    0 %

    p/st

    31.12.2018

    ex 9401 90 80

    30

    Steel bracket for mounting safety features seats with thickness of 1 mm or more but not more than 2,5 mm used in the manufacture of reclining car seats (1)

    0 %

    p/st

    31.12.2018

    ex 9401 90 80

    40

    Steel handles for controlling the seat adjustment mechanism used in the manufacture of reclining car seats (1)

    0 %

    p/st

    31.12.2018

     (7)ex 9401 90 80

    60

    Outer part of a headrest made of perforated bovine leather, lined with a scrim-reinforced lamination liner and without foam padding, after reworking (stitching of the leather and embroidery application) used in manufacture of seats of motor vehicles

    0 %

    -

    31.12.2020

    ex 9405 40 35

    10

    Electric light assembly of synthetic material containing 3 fluorescent tubes (RBG) of a diameter of 3,0 mm (± 0,2 mm), of a length of 420 mm (± 1 mm) or more but not more than 600 mm (± 1 mm), for the manufacture of goods of heading 8528  (1)

    0 %

    p/st

    31.12.2018

    ex 9405 40 39

    10

    Ambient light module with a length of 300 mm or more but not more than 600 mm, based on a light engine of a series of 3 or more but not more than 9 specific one chip red green and blue light emitting diodes mounted on a PCB, with light coupled to the front and/or back of the flat TV set

    0 %

    p/st

    31.12.2018

    ex 9405 40 39

    20

    LED array of white silicone, containing:

    — an LED matrix module measuring 38,6 mm × 20,6 mm (± 0,1 mm), equipped with 128 red and green LED chips, and

    — a flexible printed circuit board, equipped with a Negative Temperature Coefficient Thermistor

    0 %

    p/st

    31.12.2018

     (7)ex 9503 00 75

    ex 9503 00 95

    10

    10

    Plastic cable car scale models, whether or not with a motor, for printing (1)

    0 %

    p/st

    31.12.2020

    ex 9608 91 00

    10

    Non-fibrous plastic pen-tips with an internal canal

    0 %

    -

    31.12.2018

    ex 9608 91 00

    20

    Felt tips and other porous-tips for markers, without internal canal

    0 %

    -

    31.12.2018

    ex 9612 10 10

    10

    Ribbons of plastic with segments of different colours, providing the penetration of dyes by heat into a support (so called dye-sublimation)

    0 %

    -

    31.12.2018

    (1)   Suspension of duties is subject to end-use customs supervision in accordance with Articles 291 to 300 of Commission Regulation (EEC) No 2454/93 of 2 July 1993 laying down provisions for the implementation of Council Regulation (EEC) No 2913/92 establishing the Community Customs Code (OJ L 253, 11.10.1993, p. 1).

    (2)   However, the suspension of tariff duties does not apply where the processing is carried out by retail or catering undertakings.

    (3)   Only the ad valorem duty is suspended. The specific duty shall continue to apply.

    (4)   A surveillance of imports of goods covered by this tariff suspension shall be established in accordance with the procedure laid down in Article 308d of Regulation (EEC) No 2454/93.

    (5)   CUS (Customs Union and Statistics Number) is assigned to each ECICS record (product). ECICS (European Customs Inventory of Chemical Substances) is an information tool managed by the European Commission, General Directorate for Taxation and Customs Union. More information can be found via the following link:

    (6)   The expression ‘industrial assembly’ refers to the production of new items in an assembly plant or manufacturing plant.

    (7)   A newly introduced measure or a measure with amended conditions.



    ( 1 ) Council Regulation (EU) No 1344/2011 of 19 December 2011 suspending the autonomous Common Customs Tariff duties on certain agricultural, fishery and industrial products and repealing Regulation (EC) No 1255/96 (OJ L 349, 31.12.2011, p. 1).

    ( 2 ) Council Regulation (EU) No 1220/2012 of 3 December 2012 on trade related measures to guarantee the supply of certain fishery products to Union processors from 2013 to 2015, amending Regulations (EC) No 104/2000 and (EU) No 1344/2011 (OJ L 349, 19.12.2012, p. 4).

    ( 3 ) Council Regulation (EEC) No 2658/87 of 23 July 1987 on the tariff and statistical nomenclature and on the Common Customs Tariff (OJ L 256, 7.9.1987, p. 1).

    Top