Definition:

Aluminium lakes are prepared by reacting colours complying with the purity criteria set out in the appropriate specification monograph with alumina under aqueous conditions. The alumina is usually freshly prepared undried material made by reacting aluminium sulphate or chloride with sodium or calcium carbonate or bicarbonate or ammonia. Following lake formation, the product is filtered, washed with water and dried. Unreacted alumina may also be present in the finished product.

HCl insoluble matter

Not more than 0,5 %

ΝaΟΗ insoluble matter

Νot more than 0,5 %, for Ε 127 erythrosine only

Ether extractable matter

Not more than 0,2 % (under neutral conditions)

Specific purity criteria for the corresponding colours are applicable.

Synonyms

CI Natural Yellow 3; Turmeric Yellow; Diferoyl Methane

Definition

Curcumin is obtained by solvent extraction of turmeric i.e. the ground rhizomes of strains of Curcuma longa L. In order to obtain a concentrated curcumin powder, the extract is purified by crystallization. The product consists essentially of curcumins; i.e. the colouring principle (1,7-bis(4-hydroxy-3-methoxyphenyl)hepta-1,6-dien-3,5-dione) and its two desmethoxy derivatives in varying proportions. Minor amounts of oils and resins naturally occurring in turmeric may be present.

Curcumin is also used as the aluminium lake; the aluminium content is less than 30 %.

Only the following solvents may be used in the extraction: ethylacetate, acetone, carbon dioxide, dichloromethane, n-butanol, methanol, ethanol, hexane, propan-2-ol.

Colour Index No

75300

Einecs

207-280-5

Chemical name

I  1,7-Bis(4-hydroxy-3-methoxyphenyl)hepta-1,6-diene-3,5-dione

II  1-(4-Hydroxyphenyl)-7-(4-hydroxy-3-methoxy-phenyl-)hepta-1,6-diene-3,5-dione

III  1,7-Bis(4-hydroxyphenyl)hepta-1,6-diene-3,5-dione

Chemical formula

I  C21H20O6

II  C20H18O5

III  C19H16O4

Molecular weight

I.  368,39

II.  338,39

III.  308,39

Assay

Content not less than 90 % total colouring matters

Description

Orange-yellow crystalline powder

Identification

Spectrometry

Maximum in ethanol at ca. 426 nm

Melting range

179 °C-182 °C

Purity

Solvent residues

Ethylacetate

Acetone

n-butanol

Methanol

Ethanol

Hexane

Propan-2-ol

Dichloromethane: not more than 10 mg/kg

Arsenic

Not more than 3 mg/kg

Lead

Not more than 10 mg/kg

Mercury

Not more than 1 mg/kg

Cadmium

Not more than 1 mg/kg

Synonyms

Lactoflavin;

Definition

Colour Index No

Einecs

201-507-1

Chemical name

7,8-Dimethyl-10-(D-ribo-2,3,4,5-tetrahydroxypentyl)benzo(g)pteridine-2,4(3H,10H)-dione; 7,8-dimethyl-10-(1′-D-ribityl)isoalloxazine

Chemical formula

C17H20N4O6

Molecular weight

376,37

Assay

Content not less than 98 % on the anhydrous basis

Description

Yellow to orange-yellow crystalline powder, with slight odour

Identification

Spectrometry

The ratio A375/A267 is between 0,31 and 0,33

The ratio A444/A267 is between 0,36 and 0,39

Maximum in water at ca. 375 nm

Specific rotation

[α]D 20 between – 115° and – 140° in a 0,05 N sodium hydroxide solution

Purity

Loss on drying

Not more than 1,5 % (105 °C, 4 hours)

Sulphated ash

Not more than 0,1 %

Primary aromatic amines

Not more than 100 mg/kg (calculated as aniline)

Arsenic

Not more than 3 mg/kg

Lead

Not more than 2 mg/kg

Mercury

Not more than 1 mg/kg

Cadmium

Not more than 1 mg/kg

Synonyms

Riboflavin-5′-phosphate sodium

Definition

These specifications apply to riboflavin 5′-phosphate together with minor amounts of free riboflavin and riboflavin diphosphate.

Colour Index No

Einecs

204-988-6

Chemical name

Monosodium(2R,3R,4S)-5-(3′)10′-dihydro-7′,8′-dimethyl-2′,4′-dioxo-10′-benzo[γ]pteridinyl)-2,3,4-trihydroxypentyl phosphate; monosodium salt of 5′-monophosphate ester of riboflavin

Chemical formula

For the dihydrate form: C17H20N4NaO9P · 2H2O

For the anhydrous form: C17H20N4NaO9P

Molecular weight

514,36

Assay

Content not less than 95 % total colouring matters calculated as C17H20N4NaO9P.2H2O

Description

Yellow to orange crystalline hygroscopic powder, with slight odour

Identification

Spectrometry

The ratio A375/A267 is between 0,30 and 0,34

The ratio A444/A267 is between 0,35 and 0,40

Maximum in water at ca. 375 nm

Specific rotation

[α]D 20 between + 38° and + 42° in a 5 molar HCl solution

Purity

Loss on drying

Not more than 8 % (100 °C, 5 hours in vacuum over P2O5) for the dihydrate form

Sulphated ash

Not more than 25 %

Inorganic phosphate

Not more than 1,0 % (calculated as PO4 on the anhydrous basis)

Subsidiary colouring matters

Riboflavin (free): Not more than 6 %

Riboflavine diphosphate: Not more than 6 %

Primary aromatic amines

Not more than 70 mg/kg (calculated as aniline)

Arsenic

Not more than 3 mg/kg

Lead

Not more than 2 mg/kg

Mercury

Not more than 1 mg/kg

Cadmium

Not more than 1 mg/kg

Synonyms

CI Food Yellow 4

Definition

Tartrazine is prepared from 4-amino-benzenesulphonic acid, which is diazotized using hydrochloric acid and sodium nitrite. The diazo compound is then coupled with 4,5-dihydro-5-oxo-1-(4sulphophenyl)-1H-pyrazole-3-carboxylic acid or with the methyl ester, the ethyl ester, or a salt of this carboxylic acid. The resulting dye is purified and isolated as the sodium salt. Tartrazine consists essentially of trisodium 5-hydroxy-1-(4-sulfonatophenyl)-4-(4-sulfonatophenylazo)-H-pyrazole-3-carboxylate and subsidiary colouring matters together with sodium chloride and/or sodium sulphate as the principal uncoloured components.

Tartrazine is described as the sodium salt. The calcium and the potassium salt are also permitted.

Colour Index No

19140

Einecs

217-699-5

Chemical name

Trisodium-5-hydroxy-1-(4-sulfonatophenyl)-4-(4-sulfonatophenylazo)-H-pyrazole-3-carboxylate

Chemical formula

C16H9N4Na3O9S2

Molecular weight

534,37

Assay

Content not less than 85 % total colouring matters calculated as the sodium salt

Description

Light orange powder or granules

Appearance of the aqueous solution

Yellow

Identification

Spectrometry

Maximum in water at ca. 426 nm

Purity

Water insoluble matter

Not more than 0,2 %

Subsidiary colouring matters

Not more than 1,0 %

Organic compounds other than colouring matters:

4-hydrazinobenzene sulfonic acid

4-aminobenzene-1-sulfonic acid

5-oxo-1-(4-sulfophenyl)-2-pyrazoline-3-carboxylic acid

4,4′-diazoaminodi(benzene sulfonic acid)

Tetrahydroxysuccinic acid

Unsulfonated primary aromatic amines

Not more than 0,01 % (calculated as aniline)

Ether extractable matter

Not more than 0,2 % under neutral conditions

Arsenic

Not more than 3 mg/kg

Lead

Not more than 2 mg/kg

Mercury

Not more than 1 mg/kg

Cadmium

Not more than 1 mg/kg

Synonyms

CI Food Yellow 13

Definition

Quinoline Yellow is prepared by sulfonating 2-(2-quinolyl) indan-1,3-dione or a mixture containing about two thirds 2-(2-quinolyl)indane-1,3-dione and one third 2-(2-(6-methylquinolyl))indane-1,3-dione. Quinoline Yellow consists essentially of sodium salts of a mixture of disulfonates (principally), monosulfonates and trisulfonates of the above compound and subsidiary colouring matters together with sodium chloride and/or sodium sulphate as the principal uncoloured components.

Quinoline Yellow is described as the sodium salt. The calcium and the potassium salt are also permitted.

Colour Index No

47005

Einecs

305-897-5

Chemical name

The disodium salts of the disulfonates of 2-(2-quinolyl) indan-1,3-dione (principal component)

Chemical formula

C18H9N Na2O8S2 (principal component)

Molecular weight

477,38 (principal component)

Assay

Content not less than 70 % total colouring matters calculated as the sodium salt

Quinoline Yellow shall have the following composition:

Of the total colouring matters present:

Description

Yellow powder or granules

Appearance of the aqueous solution

Yellow

Identification

Spectrometry

Maximum in aqueous acetic acid solution of pH 5 at ca. 411 nm

Purity

Water insoluble matter

Not more than 0,2 %

Subsidiary colouring matters

Not more than 4,0 %

Organic compounds other than colouring matters:

2-methylquinoline

2-methylquinoline-sulfonic acid

Phthalic acid

2,6-dimethyl quinoline

2,6-dimethyl quinoline sulfonic acid

2-(2-quinolyl)indan-1,3-dione

Not more than 4 mg/kg

Unsulfonated primary aromatic amines

Not more than 0,01 % (calculated as aniline)

Ether extractable matter

Not more than 0,2 % under neutral conditions

Arsenic

Not more than 3 mg/kg

Lead

Not more than 2 mg/kg

Mercury

Not more than 1 mg/kg

Cadmium

Not more than 1 mg/kg

Synonyms

CI Food Yellow 3; Orange Yellow S

Definition

Sunset Yellow FCF consists essentially of disodium 2-hydroxy-1-(4-sulfonatophenylazo) naphthalene-6-sulfonate and subsidiary colouring matters together with sodium chloride and/or sodium sulphate as the principal uncoloured components. Sunset Yellow FCF is manufactured by diazotizing 4-aminobenzenesulphonic acid using hydrochloric acid and sodium nitrite or sulphuric acid and sodium nitrite. The diazo compound is coupled with 6-hydroxy-2-naphthalene-sulphonic acid. The dye is isolated as the sodium salt and dried.

Sunset Yellow FCF is described as the sodium salt. The calcium and the potassium salt are also permitted.

Colour Index No

15985

Einecs

220-491-7

Chemical name

Disodium 2-hydroxy-1-(4-sulfonatophenylazo)naphthalene-6-sulfonate

Chemical formula

C16H10N2Na2O7S2

Molecular weight

452,37

Assay

Content not less than 85 % total colouring matters calculated as the sodium salt

Description

Orange-red powder or granules

Appearance of the aqueous solution

Orange

Identification

Spectrometry

Maximum in water at ca. 485 nm at pH 7

Purity

Water insoluble matter

Not more than 0,2 %

Subsidiary colouring matters

Not more than 5,0 %

1-(Phenylazo)-2-naphthalenol (Sudan I)

Not more than 0,5 mg/kg

Organic compounds other than colouring matters:

4-aminobenzene-1-sulfonic acid

3-hydroxynaphthalene-2,7-disulfonic acid

6-hydroxynaphthalene-2-sulfonic acid

7-hydroxynaphthalene-1,3-disulfonic acid

4,4′-diazoaminodi(benzene sulfonic acid)

6,6′-oxydi(naphthalene-2-sulfonic acid)

Unsulfonated primary aromatic amines

Not more than 0,01 % (calculated as aniline)

Ether extractable matter

Not more than 0,2 % under neutral conditions

Arsenic

Not more than 3 mg/kg

Lead

Not more than 2 mg/kg

Mercury

Not more than 1 mg/kg

Cadmium

Not more than 1 mg/kg

Synonyms

CI Natural Red 4

Definition

Carminic acid is obtained from aqueous, aqueous alcoholic or alcoholic extracts from Cochineal, which consists of the dried bodies of the female insect Dactylopius coccus Costa.

Carmines are aluminium lakes of carminic acid in which aluminium and carminic acid are thought to be present in the molar ratio 1:2.

The colouring principle is carminic acid. Minor amounts of its aminated form 4-aminocarminic acid may also be present.

In commercial products the colouring principle carminic acid may be present in association with ammonium, calcium, potassium or sodium cations, singly or in combination, and these cations may also be present in excess. Commercial products may also contain proteinaceous material derived from the source insect.

Colour Index No

75470

Einecs

Carminic acid: 215-023-3; carmines: 215-724-4

Chemical name

7-β-D-glucopyranosyl-3,5,6,8-tetrahydroxy-1-methyl-9,10-dioxoanthracene-2-carboxylic acid (carminic acid); carmine is the hydrated aluminium chelate of this acid

Chemical formula

C22H20O13 (carminic acid)

Molecular weight

492,39 (carminic acid)

Assay

Content not less than 90 % carminic acid; not less than 50 % carminic acid in the chelates.

Description

Red to dark red, friable, solid or powder

Identification

Spectrometry

Carminic acid:

4-aminocarminic acid:

In commercial products carminic acid may be differentiated from its amine by HPLC

Purity

Solvent residues

Ethanol:

Methanol:

Not more than 150 mg/kg

Not more than 50 mg/kg

Total ash

Carminic acid:

Carmine:

Not more than 5 %

Not more than 12 %

Protein (N × 6,25)

Carminic acid:

Carmine:

Not more than 2,2 %

Not more than 25 %

4-aminocarminic acid

Not more than 3 % relative to carminic acid

Matter insoluble in dilute ammonia

Carmine: Not more than 1 %

Arsenic

Not more than 1 mg/kg

Lead

Not more than 1,5 mg/kg

Mercury

Not more than 0,5 mg/kg

Cadmium

Not more than 0,1 mg/kg

Microbiological criteria

Salmonella spp.

Absent in 10 g

Synonyms

CI Food Red 3

Definition

Azorubine consists essentially of disodium 4-hydroxy-3-(4-sulfonato-1-naphthylazo) naphthalene-1-sulfonate and subsidiary colouring matters together with sodium chloride and/or sodium sulphate as the principal uncoloured components.

Azorubine is described as the sodium salt. The calcium and the potassium salt are also permitted.

Colour Index No

14720

Einecs

222-657-4

Chemical name

Disodium 4-hydroxy-3-(4-sulfonato-1-naphthylazo) naphthalene-1-sulfonate

Chemical formula

C20H12N2Na2O7S2

Molecular weight

502,44

Assay

Content not less than 85 % total colouring matters, calculated as the sodium salt

Description

Red to maroon powder or granules

Appearance of the aqueous solution

Red

Identification

Spectrometry

Maximum in water at ca. 516 nm

Purity

Water insoluble matter

Not more than 0,2 %

Subsidiary colouring matters

Not more than 1 %

Organic compounds other than colouring matters:

4-aminonaphthalene-1-sulfonic acid

4-hydroxynaphthalene-1-sulfonic acid

Unsulfonated primary aromatic amines

Not more than 0,01 % (calculated as aniline)

Ether extractable matter

Not more than 0,2 % under neutral conditions

Arsenic

Not more than 3 mg/kg

Lead

Not more than 2 mg/kg

Mercury

Not more than 1 mg/kg

Cadmium

Not more than 1 mg/kg

Synonyms

CI Food Red 9

Definition

Amaranth consists essentially of trisodium 2-hydroxy-1-(4-sulfonato-1-naphthylazo) naphthalene-3,6-disulfonate and subsidiary colouring matters together with sodium chloride and/or sodium sulphate as the principal uncoloured components. Amaranth is manufactured by coupling 4-amino-1-naphthalenesulphonic acid with 3-hydroxy-2,7-naphthalenedisulphonic acid.

Amaranth is described as the sodium salt. The calcium and the potassium salt are also permitted.

Colour Index No

16185

Einecs

213-022-2

Chemical name

Trisodium 2-hydroxy-1-(4-sulfonato-1-naphthylazo) naphthalene-3,6-disulfonate

Chemical formula

C20H11N2Na3O10S3

Molecular weight

604,48

Assay

Content not less than 85 % total colouring matters, calculated as the sodium salt

Description

Reddish-brown powder or granules

Appearance of the aqueous solution

Red

Identification

Spectrometry

Maximum in water at ca. 520 nm

Purity

Water insoluble matter

Not more than 0,2 %

Subsidiary colouring matters

Not more than 3,0 %

Organic compounds other than colouring matters:

4-aminonaphthalene-1-sulfonic acid

3-hydroxynaphthalene-2,7-disulfonic acid

6-hydroxynaphthalene-2-sulfonic acid

7-hydroxynaphthalene-1,3-disulfonic acid

7-hydroxynaphthalene-1,3-6-trisulfonic acid

Unsulfonated primary aromatic amines

Not more than 0,01 % (calculated as aniline)

Ether extractable matter

Not more than 0,2 % under neutral conditions

Arsenic

Not more than 3 mg/kg

Lead

Not more than 2 mg/kg

Mercury

Not more than 1 mg/kg

Cadmium

Not more than 1 mg/kg

Synonyms

CI Food Red 7; New Coccine

Definition

Ponceau 4R consists essentially of trisodium 2-hydroxy-1-(4-sulfonato-1-naphthylazo) naphthalene-6,8-disulfonate and subsidiary colouring matters together with sodium chloride and/or sodium sulphate as the principal uncoloured components. Ponceau 4R is manufactured by coupling diazotized naphthionic acid to G acid (2-naphthol-6,8- disulphonic acid) and converting the coupling product to the trisodium salt.

Ponceau 4R is described as the sodium salt. The calcium and the potassium salt are also permitted.

Colour Index No

16255

Einecs

220-036-2

Chemical name

Trisodium 2-hydroxy-1-(4-sulfonato-1-naphthylazo) naphthalene-6,8-disulfonate

Chemical formula

C20H11N2Na3O10S3

Molecular weight

604,48

Assay

Content not less than 80 % total colouring matters, calculated as the sodium salt.

Description

Reddish powder or granules

Appearance of the aqueous solution

Red

Identification

Spectrometry

Maximum in water at ca. 505 nm

Purity

Water insoluble matter

Not more than 0,2 %

Subsidiary colouring matters

Not more than 1,0 %

Organic compounds other than colouring matters:

4-aminonaphthalene-1-sulfonic acid

7-hydroxynaphthalene-1,3-disulfonic acid

3-hydroxynaphthalene-2,7-disulfonic acid

6-hydroxynaphthalene-2-sulfonic acid

7-hydroxynaphthalene-1,3-6-trisulfonic acid

Unsulfonated primary aromatic amines

Not more than 0,01 % (calculated as aniline)

Ether extractable matter

Not more than 0,2 % under neutral conditions

Arsenic

Not more than 3 mg/kg

Lead

Not more than 2 mg/kg

Mercury

Not more than 1 mg/kg

Cadmium

Not more than 1 mg/kg

Synonyms

CI Food Red 14

Definition

Erythrosine consists essentially of disodium 2-(2,4,5,7-tetraiodo-3-oxido-6-oxoxanthen-9-yl) benzoate monohydrate and subsidiary colouring matters together with water, sodium chloride and/or sodium sulphate as the principal uncoloured components. Erythrosine is manufactured by iodination of fluorescein, the condensation product of resorcinol and phthalic anhydride

Erythrosine is described as the sodium salt. The calcium and the potassium salt are also permitted.

Colour Index No

45430

Einecs

240-474-8

Chemical name

Disodium 2-(2,4,5,7-tetraiodo-3-oxido-6-oxoxanthen-9-yl)benzoate monohydrate

Chemical formula

C20H6I4Na2O5 H2O

Molecular weight

897,88

Assay

Content not less than 87 % total colouring matters, calculated as the anhydrous sodium salt

Description

Red powder or granules.

Appearance of the aqueous solution

Red

Identification

Spectrometry

Maximum in water at ca. 526 nm at pH 7

Purity

Inorganic iodides

Not more than 0,1 % (calculated as sodium iodide)

Water insoluble matter

Not more than 0,2 %

Subsidiary colouring matters (except fluorescein)

Not more than 4,0 %

Fluorescein

Not more than 20 mg/kg

Organic compounds other than colouring matters:

Tri-iodoresorcinol

Not more than 0,2 %

2-(2,4-dihydroxy-3,5-diiodobenzoyl) benzoic acid

Not more than 0,2 %

Ether extractable matter

From a solution of pH from 7 through 8, not more than 0,2 %

Arsenic

Not more than 3 mg/kg

Lead

Not more than 2 mg/kg

Mercury

Not more than 1 mg/kg

Cadmium

Not more than 1 mg/kg

Synonyms

CI Food Red 17

Definition

Allura Red AC consists essentially of disodium 2-hydroxy-1-(2-methoxy-5-methyl-4-sulfonato-phenylazo) naphthalene-6-sulfonate and subsidiary colouring matters together with sodium chloride and/or sodium sulphate as the principal uncoloured components. Allura Red AC is manufactured by coupling diazotized 5-amino-4-methoxy-2-toluenesulphonic acid with 6-hydroxy-2-naphthalene sulphonic acid

Allura Red AC is described as the sodium salt. The calcium and the potassium salt are also permitted.

Colour Index No

16035

Einecs

247-368-0

Chemical name

Disodium 2-hydroxy-1-(2-methoxy-5-methyl-4-sulfonatophenylazo) naphthalene-6-sulfonate

Chemical formula

C18H14N2Na2O8S2

Molecular weight

496,42

Assay

Content not less than 85 % total colouring matters, calculated as the sodium salt

Description

Dark red powder or granules

Appearance of the aqueous solution

Red

Identification

Spectrometry

Maximum in water at ca. 504 nm

Purity

Water insoluble matter

Not more than 0,2 %

Subsidiary colouring matters

Not more than 3,0 %

Organic compounds other than colouring matters:

6-hydroxy-2-naphthalene sulfonic acid, sodium salt

Not more than 0,3 %

4-amino-5-methoxy-2-methylbenezene sulfonic acid

Not more than 0,2 %

6,6-oxybis (2-naphthalene sulfonic acid) disodium salt

Not more than 1,0 %

Unsulfonated primary aromatic amines

Not more than 0,01 % (calculated as aniline)

Ether extractable matter

From a solution of pH 7, not more than 0,2 %

Arsenic

Not more than 3 mg/kg

Lead

Not more than 2 mg/kg

Mercury

Not more than 1 mg/kg

Cadmium

Not more than 1 mg/kg

Synonyms

CI Food Blue 5

Definition

Patent Blue V consists essentially of the calcium or sodium compound of [4-(α-(4-diethylaminophenyl)-5-hydroxy-2,4-disulfophenyl-methylidene)2,5-cyclohexadien-1-ylidene] diethylammonium hydroxide inner salt and subsidiary colouring matters together with sodium chloride and/or sodium sulphate and/or calcium sulphate as the principal uncoloured components.

The potassium salt is also permitted.

Colour Index No

42051

Einecs

222-573-8

Chemical name

The calcium or sodium compound of [4-(α-(4-diethylaminophenyl)-5-hydroxy-2,4-disulfophenyl-methylidene) 2,5-cyclohexadien-1-ylidene] diethyl-ammonium hydroxide inner salt

Chemical formula

Calcium compound: C27H31N2O7S2Ca1/2

Sodium compound: C27H31N2O7S2Na

Molecular weight

Calcium compound: 579,72

Sodium compound: 582,67

Assay

Content not less than 85 % total colouring matters, calculated as the sodium salt

Description

Dark blue powder or granules

Appearance of the aqueous solution

Blue

Identification

Spectrometry

Maximum in water at 638 nm at pH 5

Purity

Water insoluble matter

Not more than 0,2 %

Subsidiary colouring matters

Not more than 2,0 %

Organic compounds other than colouring matters:

3-hydroxy benzaldehyde

3-hydroxy benzoic acid

3-hydroxy-4-sulfobenzoic acid

N,N-diethylamino benzene sulfonic acid

Leuco base

Not more than 4,0 %

Unsulfonated primary aromatic amines

Not more than 0,01 % (calculated as aniline)

Ether extractable matter

From a solution of pH 5 not more than 0,2 %

Arsenic

Not more than 3 mg/kg

Lead

Not more than 2 mg/kg

Mercury

Not more than 1 mg/kg

Cadmium

Not more than 1 mg/kg

Synonyms

CI Food Blue 1

Definition

Indigotine consists essentially of a mixture of disodium 3,3′dioxo-2,2′-bi-indolylidene-5,5′-disulfonate, and disodium 3,3′-dioxo-2,2′-bi-indolylidene-5,7′-disulfonate and subsidiary colouring matters together with sodium chloride and/or sodium sulphate as the principal uncoloured components.

Indigotine is described as the sodium salt. The calcium and the potassium salt are also permitted.

Indigo carmine is obtained by sulphonation of indigo. This is accomplished by heating indigo (or indigo paste) in the presence of sulphuric acid. The dye is isolated and subjected to purification procedures.

Colour Index No

73015

Einecs

212-728-8

Chemical name

Disodium 3,3′-dioxo-2,2′-bi-indolylidene-5,5′-disulfonate

Chemical formula

C16H8N2Na2O8S2

Molecular weight

466,36

Assay

Content not less than 85 % total colouring matters, calculated as the sodium salt;

disodium 3,3′-dioxo-2,2′-bi-indolylidene-5,7′-disulfonate: not more than 18 %

Description

Dark-blue powder or granules

Appearance of the aqueous solution

Blue

Identification

Spectrometry

Maximum in water at ca. 610 nm

Purity

Water insoluble matter

Not more than 0,2 %

Subsidiary colouring matters

Excluding disodium 3,3′-dioxo-2,2′-bi-indolylidene-5,7′-disulfonate: not more than 1,0 %

Organic compounds other than colouring matters:

Isatin-5-sulfonic acid

5-sulfoanthranilic acid

Anthranilic acid

Unsulfonated primary aromatic amines

Not more than 0,01 % (calculated as aniline)

Ether extractable matter

Not more than 0,2 % under neutral conditions

Arsenic

Not more than 3 mg/kg

Lead

Not more than 2 mg/kg

Mercury

Not more than 1 mg/kg

Cadmium

Not more than 1 mg/kg

Synonyms

CI Food Blue 2

Definition

Brilliant Blue FCF consists essentially of disodium α-(4-(N-ethyl-3-sulfonatobenzylamino) phenyl)-α-(4-N-ethyl-3-sulfonatobenzylamino) cyclohexa-2,5-dienylidene) toluene-2-sulfonate and its isomers and subsidiary colouring matters together with sodium chloride and/or sodium sulphate as the principal uncoloured components.

Brilliant Blue FCF is described as the sodium salt. The calcium and the potassium salt are also permitted.

Colour Index No

42090

Einecs

223-339-8

Chemical name

Disodium α-(4-(N-ethyl-3-sulfonatobenzylamino) phenyl)-α-(4-N-ethyl-3-sulfonatobenzylamino) cyclohexa-2,5-dienylidene) toluene-2-sulfonate

Chemical formula

C37H34N2Na2O9S3

Molecular weight

792,84

Assay

Content not less than 85 % total colouring matters, calculated as the sodium salt

Description

Reddish-blue powder or granules

Appearance of the aqueous solution

Blue

Identification

Spectrometry

Maximum in water at ca. 630 nm

Purity

Water insoluble matter

Not more than 0,2 %

Subsidiary colouring matters

Not more than 6,0 %

Organic compounds other than colouring matters:

Sum of 2-, 3- and 4-formyl benzene sulfonic acids

Not more than 1,5 %

3-((ethyl)(4-sulfophenyl) amino) methyl benzene sulfonic acid

Not more than 0,3 %

Leuco base

Not more than 5,0 %

Unsulfonated primary aromatic amines

Not more than 0,01 % (calculated as aniline)

Ether extractable matter

Not more than 0,2 % at pH 7

Arsenic

Not more than 3 mg/kg

Lead

Not more than 2 mg/kg

Mercury

Not more than 1 mg/kg

Cadmium

Not more than 1 mg/kg

Synonyms

CI Natural Green 3; Magnesium Chlorophyll; Magnesium Phaeophytin

Definition

Chlorophylls are obtained by solvent extraction of strains of edible plant material, grass, lucerne and nettle. During the subsequent removal of solvent, the naturally present coordinated magnesium may be wholly or partly removed from the chlorophylls to give the corresponding phaeophytins. The principal colouring matters are the phaeophytins and magnesium chlorophylls. The extracted product, from which the solvent has been removed, contains other pigments such as carotenoids as well as oils, fats and waxes derived from the source material. Only the following solvents may be used for the extraction: acetone, methyl ethyl ketone, dichloromethane, carbon dioxide, methanol, ethanol, propan-2-ol and hexane.

Colour Index No

75810

Einecs

Chlorophylls: 215-800-7, chlorophyll a: 207-536-6, Chlorophyll b: 208-272-4

Chemical name

The major colouring principles are:

Phytyl (132R,17S,18S)-3-(8-ethyl-132-methoxycarbonyl-2,7,12,18-tetramethyl-13′-oxo-3-vinyl-131-132-17,18-tetrahydrocyclopenta [at]-porphyrin-17-yl)propionate, (Phaeophytin a), or as the magnesium complex (Chlorophyll a)

Phytyl (132R,17S,18S)-3-(8-ethyl-7-formyl-132-methoxycarbonyl-2,12,18-trimethyl-13′-oxo-3-vinyl-131-132-17,18-tetrahydrocyclopenta[at]-porphyrin-17-yl)propionate, (Pheophytin b), or as the magnesium complex (Chlorophyll b)

Chemical formula

Chlorophyll a (magnesium complex): C55H72MgN4O5

Chlorophyll a: C55H74N4O5

Chlorophyll b (magnesium complex): C55H70MgN4O6

Chlorophyll b: C55H72N4O6

Molecular weight

Chlorophyll a (magnesium complex): 893,51

Chlorophyll a: 871,22

Chlorophyll b (magnesium complex): 907,49

Chlorophyll b: 885,20

Assay

Content of total combined Chlorophylls and their magnesium complexes is not less than 10 %

Description

Waxy solid ranging in colour from olive green to dark green depending on the content of coordinated magnesium

Identification

Spectrometry

Maximum in chloroform at ca. 409 nm

Purity

Solvent residues

Acetone

Methyl Ethyl ketone

Methanol

Ethanol

Propan-2-ol

Hexane

Dichloromethane:

Not more than 10 mg/kg

Arsenic

Not more than 3 mg/kg

Lead

Not more than 5 mg/kg

Mercury

Not more than 1 mg/kg

Cadmium

Not more than 1 mg/kg

Synonyms

CI Natural Green 5; Sodium Chlorophyllin; Potassium Chlorophyllin

Definition

The alkali salts of chlorophyllins are obtained by the saponification of a solvent extract of strains of edible plant material, grass, lucerne and nettle. The saponification removes the methyl and phytol ester groups and may partially cleave the cyclopentenyl ring. The acid groups are neutralised to form the salts of potassium and/or sodium.

Only the following solvents may be used for the extraction: acetone, methyl ethyl ketone, dichloromethane, carbon dioxide, methanol, ethanol, propan-2-ol and hexane.

Colour Index No

75815

Einecs

287-483-3

Chemical name

The major colouring principles in their acid forms are:

Depending on the degree of hydrolysis the cyclopentenyl ring may be cleaved with the resultant production of a third carboxyl function.

Magnesium complexes may also be present.

Chemical formula

Chlorophyllin a (acid form): C34H34N4O5

Chlorophyllin b (acid form): C34H32N4O6

Molecular weight

Chlorophyllin a: 578,68

Chlorophyllin b: 592,66

Each may be increased by 18 daltons if the cyclopentenyl ring is cleaved.

Assay

Content of total chlorophyllins is not less than 95 % of the sample dried at ca. 100 °C for 1 hour.

Description

Dark green to blue/black powder

Identification

Spectrometry

Maximum in aqueous phosphate buffer at pH 9 at ca. 405 nm and at ca. 653 nm

Purity

Solvent residues

Acetone

Methyl ethyl ketone

Methanol

Ethanol

Propan-2-ol

Hexane

Dichloromethane:

not more than 10 mg/kg

Arsenic

Not more than 3 mg/kg

Lead

Not more than 10 mg/kg

Mercury

Not more than 1 mg/kg

Cadmium

Not more than 1 mg/kg

Synonyms

CI Natural Green 3; Copper Chlorophyll; Copper Phaeophytin

Definition

Copper chlorophylls are obtained by addition of a salt of copper to the substance obtained by solvent extraction of strains of edible plant material, grass, lucerne, and nettle. The product, from which the solvent has been removed, contains other pigments such as carotenoids as well as fats and waxes derived from the source material. The principal colouring matters are the copper phaeophytins. Only the following solvents may be used for the extraction: acetone, methyl ethyl ketone, dichloromethane, carbon dioxide, methanol, ethanol, propan-2-ol and hexane.

Colour Index No

75810

Einecs

Copper chlorophyll a: 239-830-5; copper chlorophyll b: 246-020-5

Chemical name

[Phytyl (132R,17S,18S)-3-(8-ethyl-132-methoxycarbonyl-2,7,12,18-tetramethyl-13′-oxo-3-vinyl-131-132-17,18-tetrahydrocyclopenta[at]-porphyrin-17-yl)propionate] copper (II) (Copper Chlorophyll a)

[Phytyl (132R,17S,18S)-3-(8-ethyl-7-formyl-132-methoxycarbonyl-2,12,18-trimethyl-13′-oxo-3-vinyl-131-132-17,18-tetrahydrocyclopenta[at]-porphyrin-17-yl)propionate] copper (II) (Copper chlorophyll b)

Chemical formula

Copper chlorophyll a: C55H72Cu N4O5

Copper chlorophyll b: C55H70Cu N4O6

Molecular weight

Copper chlorophyll a: 932,75

Copper chlorophyll b: 946,73

Assay

Content of total copper chlorophylls is not less than 10 %.

Description

Waxy solid ranging in colour from blue green to dark green depending on the source material

Identification

Spectrometry

Maximum in chloroform at ca. 422 nm and at ca. 652 nm

Purity

Solvent residues

Acetone

Methyl ethyl ketone

Methanol

Ethanol

Propan-2-ol

Hexane

Dichloromethane:

not more than 10 mg/kg

Arsenic

Not more than 3 mg/kg

Lead

Not more than 2 mg/kg

Mercury

Not more than 1 mg/kg

Cadmium

Not more than 1 mg/kg

Copper ions

Not more than 200 mg/kg

Total copper

Not more than 8,0 % of the total copper phaeophytins

Synonyms

Sodium Copper Chlorophyllin; Potassium Copper Chlorophyllin; CI Natural Green 5

Definition

The alkali salts of copper chlorophyllins are obtained by the addition of copper to the product obtained by the saponification of a solvent extraction of strains of edible plant material, grass, lucerne, and nettle; the saponification removes the methyl and phytol ester groups and may partially cleave the cyclopentenyl ring. After addition of copper to the purified chlorophyllins, the acid groups are neutralised to form the salts of potassium and/or sodium.

Only the following solvents may be used for the extraction: acetone, methyl ethyl ketone, dichloromethane, carbon dioxide methanol, ethanol, propan-2-ol and hexane.

Colour Index No

75815

Einecs

Chemical name

The major colouring principles in their acid forms are 3-(10-Carboxylato-4-ethyl-1,3,5,8-tetramethyl-9-oxo-2-vinylphorbin-7-yl)propionate, copper complex (Copper chlorophyllin a) and 3-(10-Carboxylato-4-ethyl-3-formyl-1,5,8-trimethyl-9-oxo-2-vinylphorbin-7-yl) propionate, copper complex (Copper chlorophyllin b)

Chemical formula

Copper chlorophyllin a (acid form): C34H32Cu N4O5

Copper chlorophyllin b (acid form): C34H30Cu N4O6

Molecular weight

Copper chlorophyllin a: 640,20

Copper chlorophyllin b: 654,18

Each may be increased by 18 daltons if the cyclopentenyl ring is cleaved.

Assay

Content of total copper chlorophyllins is not less than 95 % of the sample dried at 100 °C for 1 h.

Description

Dark green to blue/black powder

Identification

Spectrometry

Maximum in aqueous phosphate buffer at pH 7,5 at ca. 405 nm and at 630 nm

Purity

Solvent residues

Acetone

Methyl ethyl ketone

Methanol

Ethanol

Propan-2-ol

Hexane

Dichloromethane:

not more than 10 mg/kg

Arsenic

Not more than 3 mg/kg

Lead

Not more than 5 mg/kg

Mercury

Not more than 1 mg/kg

Cadmium

Not more than 1 mg/kg

Copper ions

Not more than 200 mg/kg

Total copper

Not more than 8,0 % of the total copper chlorophyllins

Synonyms

CI Food Green 4, Brilliant Green BS

Definition

Green S consists essentially of sodium N-[4-[[4-(dimethylamino)phenyl] 2-hydroxy-3,6-disulfo-1-naphthalenyl)methylene]-2,5-cyclohexadien-1-ylidene]-N-methylmethanaminium and subsidiary colouring matters together with sodium chloride and/or sodium sulphate as the principal uncoloured compounds.

Green S is described as the sodium salt. The calcium and the potassium salt are also permitted.

Colour Index No

44090

Einecs

221-409-2

Chemical name

Sodium N-[4-[[4-(dimethylamino)phenyl](2-hydroxy-3,6-disulfo-1-naphthalenyl)-methylene]2,5-cyclohexadien-1-ylidene]-N-methylmethanaminium; Sodium 5-[4-dimethylamino-α-(4-dimethyliminocyclohexa-2,5-dienylidene) benzyl]-6-hydroxy-7-sulfonato-naphthalene-2-sulfonate (alternative chemical name).

Chemical formula

C27H25N2NaO7S2

Molecular weight

576,63

Assay

Content not less than 80 % total colouring matters calculated as the sodium salt

Description

Dark blue or dark green powder or granules

Appearance of the aqueous solution

Blue or green

Identification

Spectrometry

Maximum in water at ca. 632 nm

Purity

Water insoluble matter

Not more than 0,2 %

Subsidiary colouring matters

Not more than 1,0 %

Organic compounds other than colouring matters:

4,4′-bis(dimethylamino)-benzhydryl alcohol

Not more than 0,1 %

4,4′-bis(dimethylamino)-benzophenone

Not more than 0,1 %

3-hydroxynaphthalene-2,7-disulfonic acid

Not more than 0,2 %

Leuco base

Not more than 5,0 %

Unsulfonated primary aromatic amines

Not more than 0,01 % (calculated as aniline)

Ether extractable matter

Not more than 0,2 % under neutral conditions

Arsenic

Not more than 3 mg/kg

Lead

Not more than 2 mg/kg

Mercury

Not more than 1 mg/kg

Cadmium

Not more than 1 mg/kg

Synonyms

Caustic caramel

Definition

Plain caramel is prepared by the controlled heat treatment of carbohydrates (commercially available food grade nutritive sweeteners which are the monomers glucose and fructose and/or polymers thereof, e.g. glucose syrups, sucrose, and/or invert syrups, and dextrose). To promote caramelisation, acids, alkalis and salts may be employed, with the exception of ammonium compounds and sulphites.

Colour Index No

Einecs

232-435-9

Chemical name

Chemical formula

Molecular weight

Assay

Description

Dark brown to black liquids or solids

Identification

Purity

Colour bound by DEAE cellulose

Not more than 50 %

Colour bound by phosphoryl cellulose

Not more than 50 %

Colour intensity (1)

0,01-0,12

Total nitrogen

Not more than 0,1 %

Total sulphur

Not more than 0,2 %

Arsenic

Not more than 1 mg/kg

Lead

Not more than 2 mg/kg

Mercury

Not more than 1 mg/kg

Cadmium

Not more than 1 mg/kg

Synonyms

Definition

Caustic sulphite caramel is prepared by the controlled heat treatment of carbohydrates (commercially available food grade nutritive sweeteners which are the monomers glucose and fructose and/or polymers thereof, e.g. glucose syrups, sucrose, and/or invert syrups, and dextrose) with or without acids or alkalis, in the presence of sulphite compounds (sulphurous acid, potassium sulphite, potassium bisulphite, sodium sulphite and sodium bisulphite); no ammonium compounds are used.

Colour Index No

Einecs

232-435-9

Chemical name

Chemical formula

Molecular weight

Assay

Description

Dark brown to black liquids or solids

Identification

Purity

Colour bound by DEAE cellulose

More than 50 %

Colour intensity (1)

0,05-0,13

Total nitrogen

Not more than 0,3 % (2)

Sulphur dioxide

Not more than 0,2 % (2)

Total sulphur

0,3-3,5 % (2)

Sulphur bound by DEAE cellulose

More than 40 %

Absorbance ratio of colour bound by DEAE cellulose

19-34

Absorbance ratio (A 280/560)

Greater than 50

Arsenic

Not more than 1 mg/kg

Lead

Not more than 2 mg/kg

Mercury

Not more than 1 mg/kg

Cadmium

Not more than 1 mg/kg

Synonyms

Definition

Ammonia caramel is prepared by the controlled heat treatment of carbohydrates (commercially available food grade nutritive sweeteners which are the monomers glucose and fructose and/or polymers thereof, e.g. glucose syrups, sucrose, and/or invert syrups, and dextrose) with or without acids or alkalis, in the presence of ammonium compounds (ammonium hydroxide, ammonium carbonate, ammonium hydrogen carbonate and ammonium phosphate); no sulphite compounds are used.

Colour Index No

Einecs

232-435-9

Chemical name

Chemical formula

Molecular weight

Assay

Description

Dark brown to black liquids or solids

Identification

Purity

Colour bound by DEAE cellulose

Not more than 50 %

Colour bound by phosphoryl cellulose

More than 50 %

Colour intensity (1)

0,08-0,36

Ammoniacal nitrogen

Not more than 0,3 % (2)

4-methylimidazole

Not more than 200 mg/kg (2)

2-acetyl-4-tetrahydroxy-butylimidazole

Not more than 10 mg/kg (2)

Total sulphur

Not more than 0,2 % (2)

Total nitrogen

0,7-3,3 % (2)

Absorbance ratio of colour bound by phosphoryl cellulose

13-35

Arsenic

Not more than 1 mg/kg

Lead

Not more than 2 mg/kg

Mercury

Not more than 1 mg/kg

Cadmium

Not more than 1 mg/kg

Synonyms

Definition

Sulphite ammonia caramel is prepared by the controlled heat treatment of carbohydrates (commercially available food grade nutritive sweeteners which are the monomers glucose and fructose and/or polymers thereof (e.g. glucose syrups, sucrose, and/or invert syrups, and dextrose) with or without acids or alkalis in the presence of both sulphite and ammonium compounds (sulphurous acid, potassium sulphite, potassium bisulphite, sodium sulphite, sodium bisulphite, ammonium hydroxide, ammonium carbonate, ammonium hydrogen carbonate, ammonium phosphate, ammonium sulphate, ammonium sulphite and ammonium hydrogen sulphite).

Colour Index No

Einecs

232-435-9

Chemical name

Chemical formula

Molecular weight

Assay

Description

Dark brown to black liquids or solids

Identification

Purity

Colour bound by DEAE cellulose

More than 50 %

Colour intensity (1)

0,10-0,60

Ammoniacal nitrogen

Not more than 0,6 % (2)

Sulphur dioxide

Not more than 0,2 % (2)

4-methylimidazole

Not more than 250 mg/kg (2)

Total nitrogen

0,3-1,7 % (2)

Total sulphur

0,8-2,5 % (2)

Nitrogen/sulphur ratio of alcohol precipitate

0,7-2,7

Absorbance ratio of alcohol precipitate (3)

8-14

Absorbance ratio (A 280/560)

Not more than 50

Arsenic

Not more than 1 mg/kg

Lead

Not more than 2 mg/kg

Mercury

Not more than 1 mg/kg

Cadmium

Not more than 1 mg/kg

Synonyms

CI Food Black 1

▼M8

Definition

Brilliant Black PN consists essentially of tetrasodium-4-acetamido-5- hydroxy-6-[7-sulfonato-4-(4-sulfonatophenylazo)-1-naphthylazo] naphthalene-1,7-disulfonate and subsidiary colouring matters together with sodium chloride and/or sodium sulphate as the principal uncoloured components.

Brilliant Black PN is described as the sodium salt.

The calcium and the potassium salt are also permitted.

▼B

Colour Index No

28440

Einecs

219-746-5

Chemical name

Tetrasodium 4-acetamido-5-hydroxy-6-[7-sulfonato-4-(4-sulfonatophenylazo)-1-naphthylazo] naphthalene-1,7-disulfonate

Chemical formula

C28H17N5Na4O14S4

Molecular weight

867,69

Assay

Content not less than 80 % total colouring matters calculated as the sodium salt

Description

Black powder or granules

Appearance of the aqueous solution

Black-bluish

Identification

Spectrometry

Maximum in water at ca. 570 nm

Purity

Water insoluble matter

Not more than 0,2 %

Subsidiary colouring matters

Not more than 4 % (expressed on the dye content)

Organic compounds other than colouring matters:

4-acetamido-5-hydroxynaphthalene-1,7-disulfonic acid

4-amino-5-hydroxynaphthalene-1,7-disulfonic acid

8-aminonaphthalene-2-sulfonic acid

4,4′-diazoaminodi-(benzenesulfonic acid)

Unsulfonated primary aromatic amines

Not more than 0,01 % (calculated as aniline)

Ether extractable matter

Not more than 0,2 % under neutral conditions

Arsenic

Not more than 3 mg/kg

Lead

Not more than 2 mg/kg

Mercury

Not more than 1 mg/kg

Cadmium

Not more than 1 mg/kg

Synonyms

Vegetable black

Definition

Vegetable activated carbon is produced by the carbonisation of vegetable material such as wood, cellulose residues, peat and coconut and other shells. The activated carbon thus produced is milled by a roller mill and the resulting highly activated powdered carbon is treated by a cyclone. The fine fractio40800n from the cyclone is purified by hydrochloric acid washing, neutralised and then dried. The resulting product is what is known traditionally as vegetable black. Products with a higher colouring power are produced from the fine fraction by a further cyclone treatment or by extra milling, followed by acid washing, neutralising and drying. It consists essentially of finely divided carbon. It may contain minor amounts of nitrogen, hydrogen and oxygen. Some moisture may be absorbed on the product after manufacture.

Colour Index No

77266

Einecs

231-153-3

Chemical name

Carbon

Chemical formula

C

Atomic weight

12,01

Assay

Content not less than 95 % of carbon calculated on an anhydrous and ash-free basis

Loss on drying

Not more than 12 % (120 °C 4 h)

Description

Black, odourless powder

Identification

Solubility

Insoluble in water and organic solvents

Burning

When heated to redness it burns slowly without a flame

Purity

Ash (Total)

Not more than 4,0 % (ignition temperature: 625 °C)

Arsenic

Not more than 3 mg/kg

Lead

Not more than 2 mg/kg

Mercury

Not more than 1 mg/kg

Cadmium

Not more than 1 mg/kg

Polycyclic aromatic hydrocarbons

Benzo(a)pyrene less than 50 μg/kg in the extract obtained by extraction of 1 g of the product with 10 g pure cyclohexane in a continuous extraction.

Alkali soluble matter

The filtrate obtained by boiling 2 g of the sample with 20 ml N sodium hydroxide and filtering shall be colourless

Synonyms

CI Food Brown 3

Definition

Brown HT consists essentially of disodium 4,4′-(2,4-dihydroxy-5-hydroxymethyl-1,3-phenylene bisazo) di (naphthalene-1-sulfonate) and subsidiary colouring matters together with sodium chloride and/or sulphate as the principal uncoloured components.

Brown HT is described as the sodium salt. The calcium and potassium salt are also permitted.

Colour Index No

20285

Einecs

224-924-0

Chemical name

Disodium 4,4′-(2,4-dihydroxy-5-hydroxymethyl-1,3-phenylene bisazo)di (naphthalene-1-sulfonate)

Chemical formula

C27H18N4Na2O9S2

Molecular weight

652,57

Assay

Content not less than 70 % total colouring matters calculated as the sodium salt.

Description

Reddish-brown powder or granules

Appearance of the aqueous solution

Brown

Identification

Spectrometry

Maximum in water of pH 7 at ca. 460 nm

Purity

Water insoluble matter

Not more than 0,2 %

Subsidiary colouring matters

Not more than 10 % (TLC method)

Organic compounds other than colouring matters:

4-aminonaphthalene- 1-sulfonic acid

Not more than 0,7 %

Unsulfonated primary aromatic amines

Not more than 0,01 % (calculated as aniline)

Ether extractable matter

Not more than 0,2 % in a solution of pH 7

Arsenic

Not more than 3 mg/kg

Lead

Not more than 2 mg/kg

Mercury

Not more than 1 mg/kg

Cadmium

Not more than 1 mg/kg

Synonyms

CI Food Orange 5

Definition

These specifications apply predominantly to all trans isomer of beta-carotene together with minor amounts of other carotenoids. Diluted and stabilised preparations may have different trans-cis isomer ratios.

Colour Index No

40800

Einecs

230-636-6

Chemical name

Beta-carotene; beta, beta-carotene

Chemical formula

C40H56

Molecular weight

536,88

Assay

Not less than 96 % total colouring matters (expressed as beta-carotene)

Description

Red to brownish-red crystals or crystalline powder

Identification

Spectrometry

Maximum in cyclohexane at 453 nm to 456 nm

Purity

Sulphated ash

Not more than 0,1 %

Subsidiary colouring matters

Carotenoids other than beta-carotene: not more than 3,0 % of total colouring matters

Lead

Not more than 2 mg/kg

Synonyms

CI Food Orange 5

Definition

Plant carotenes are obtained by solvent extraction of strains of edible plants, carrots, vegetable oils, grass, alfalfa (lucerne) and nettle.

The main colouring principle consists of carotenoids of which beta-carotene accounts for the major part. Alpha, gamma-carotene and other pigments may be present. Besides the colour pigments, this substance may contain oils, fats and waxes naturally occurring in the source material.

Only the following solvents may be used in the extraction: acetone, methyl ethyl ketone, methanol, ethanol, propan-2-ol, hexane (1), dichloromethane and carbon dioxide.

Colour Index No

75130

Einecs

230-636-6

Chemical name

Chemical formula

Beta-carotene: C40H56

Molecular weight

Beta-carotene: 536,88

Assay

Content of carotenes (calculated as beta-carotene) is not less than 5 %. For products obtained by extraction of vegetables oils: not less than 0,2 % in edible fats

Description

Identification

Spectrometry

Maximum in cyclohexane at 440 nm to 457 nm and 470 nm to 486 nm

Purity

Solvent residues

Acetone

Methyl ethyl ketone

Methanol

Propan-2-ol

Hexane

Ethanol

Dichloromethane

Not more than 10 mg/kg

Lead

Not more than 2 mg/kg

Synonyms

CI Food Orange 5

Definition

Obtained by a fermentation process using a mixed culture of the two sexual mating types (+) and (–) of strains of the fungus Blakeslea trispora. The beta-carotene is extracted from the biomass with ethyl acetate or isobutyl acetate followed by propan-2-ol and crystallised. The crystallised product consists mainly of trans beta-carotene. Because of the natural process approximately 3 % of the product consists of mixed carotenoids, which is specific for the product.

Colour Index No

40800

Einecs

230-636-6

Chemical name

Beta-carotene; beta, beta-carotene

Chemical formula

C40H56

Molecular weight

536,88

Assay

Not less than 96 % total colouring matters (expressed as beta-carotene)

Description

Red, brownish-red or purple-violet crystals or crystalline powder (colour varies according to extraction solvent used and conditions of crystallisation)

Identification

Spectrometry

Maximum in cyclohexane at 453 nm to 456 nm

Purity

Solvent residues

Ethyl acetate

Ethanol

Isobutyl acetate: Not more than 1,0 %

Propan-2-ol: Not more than 0,1 %

Sulphated ash

Not more than 0,2 %

Subsidiary colouring matters

Carotenoids other than beta-carotene: not more than 3,0 % of total colouring matters

Lead

Not more than 2 mg/kg

Microbiological criteria

Moulds

Not more than 100 colonies per gram

Yeasts

Not more than 100 colonies per gram

Salmonella spp.

Absent in 25 g

Escherichia coli

Absent in 5 g

Synonyms

CI Food Orange 5

▼M8

Definition

Mixed carotenes may also be produced from strains of the algae Dunaliella salina. Beta-carotene is extracted using an essential oil. The preparation is a 20 to 30 % suspension in edible oil. The ratio of trans-cis isomers is in the range of 50/50 to 71/29.

The main colouring principle consists of carotenoids of which beta- carotene accounts for the major part. Alpha-carotene, lutein, zeaxanthin and beta-cryptoxanthin may be present. Besides the colour pigments, this substance may contain oils, fats and waxes naturally occurring in the source material.

▼B

Colour Index No

75130

Einecs

Chemical name

Chemical formula

Beta-Carotene: C40H56

Molecular weight

Beta-Carotene: 536,88

Assay

Content of carotenes (calculated as beta-carotene) is not less than 20 %

Description

Identification

Spectrometry

Maximum in cyclohexane at 440 nm to 457 nm and 474 nm to 486 nm

Purity

Natural tocopherols in edible oil

Not more than 0,3 %

Lead

Not more than 2 mg/kg

Synonyms

Annatto B, Orlean, Terre orellana, L. Orange, CI Natural Orange 4

Definition

Solvent-extracted bixin is obtained by the extraction of the outer coating of the seeds of the annatto tree (Bixa orellana L.) with one or more of the following food grade solvents: acetone, methanol, hexane, ethanol, isopropyl alcohol, ethyl acetate, alkaline alcohol or supercritical carbon dioxide. The resulting preparation may be acidified, followed by the removal of the solvent, drying and milling.

Solvent-extracted bixin contains several coloured components; the major colouring principle is cis-bixin, a minor colouring principle is trans-bixin; thermal degradation products of bixin may also be present as a result of processing.

Colour Index No

75120

Einecs

230-248-7

Chemical name

cis-Bixin: Methyl (9-cis)-hydrogen-6,6'-diapo-Ψ,Ψ-carotenedioate

Chemical formula

cis-Bixin: C25H30O4

Molecular weight

394,5

Assay

Not less than 85 % colouring matter (expressed as bixin)

E1 % 1cm 3090 at ca. 487 nm in tetrahydrofuran and acetone

Description

Dark red-brown to red-purple powder

Identification

Solubility

Insoluble in water, slightly soluble in ethanol

Spectrometry

The sample in acetone shows absorbance maxima at about 425, 457 and 487 nm

Purity

Norbixin

Not more than 5 % of total colouring matters

Residual Solvents

Acetone: Not more than 30 mg/kg

Methanol: Not more than 50 mg/kg

Hexane: Not more than 25 mg/kg

Ethanol:

Isopropyl alcohol:

Ethyl acetate:

not more than 50 mg/kg, singly or in combination

Arsenic

Not more than 2 mg/kg

Lead

Not more than 1 mg/kg

Mercury

Not more than 1 mg/kg

Cadmium

Not more than 0,5 mg/kg

Synonyms

Annatto E, Orlean, Terre orellana, L. Orange, CI Natural Orange 4

Definition

Aqueous-processed bixin is prepared by the extraction of the outer coating of the seeds of the annatto tree (Bixa orellana L.) by abrading the seeds in the presence of cold, mildly-alkaline water. The resultant preparation is acidified to precipitate bixin which is then filtered, dried and milled.

Aqueous-processed bixin contains several coloured components; the major colouring principle is cis-bixin, a minor colouring principle is trans-bixin; thermal degradation products of bixin may also be present as a result of processing.

Colour Index No

75120

Einecs

230-248-7

Chemical name

cis-Bixin: Methyl (9-cis)-hydrogen-6,6'-diapo-Ψ,Ψ-carotenedioate

Chemical formula

cis-Bixin: C25H30O4

Molecular weight

394,5

Assay

Not less than 25 % colouring matter (expressed as bixin)

E1 % 1cm 3090 at ca. 487 nm in tetrahydrofuran and acetone

Description

Dark red-brown to red-purple powder

Identification

Solubility

Insoluble in water, slightly soluble in ethanol

Spectrometry

The sample in acetone shows absorbance maxima at about 425, 457 and 487 nm

Purity

Norbixin

Not more than 7 % of total colouring matters

Arsenic

Not more than 2 mg/kg

Lead

Not more than 1 mg/kg

Mercury

Not more than 1 mg/kg

Cadmium

Not more than 0,5 mg/kg

Synonyms

Annatto C, Orlean, Terre orellana, L. Orange, CI Natural Orange 4

Definition

Solvent-extracted norbixin is obtained from the outer coating of the seeds of the annatto tree (Bixa orellana L.) by washing with one or more of the following food grade solvents: acetone, methanol, hexane, ethanol, isopropyl alcohol, ethyl acetate, alkaline alcohol or supercritical carbon dioxide followed by solvent removal, crystallization and drying. Aqueous alkali is added to the resultant powder, which is then heated to hydrolyse the colouring matter and cooled. The aqueous solution is filtered, and acidified to precipitate the norbixin. The precipitate is filtered, washed, dried and milled, to give a granular powder.

Solvent-extracted norbixin contains several coloured components; the major colouring principle is cis-norbixin, a minor colouring principle is trans-norbixin; thermal degradation products of norbixin may also be present as a result of processing.

Colour Index No

75120

Einecs

208-810-8

Chemical name

cis-Norbixin: 6,6'-Diapo-Ψ,Ψ-carotenedioic acid

cis-Norbixin dipotassium salt: Dipotassium 6,6'-diapo-Ψ,Ψ-carotenedioate

cis-Norbixin disodium salt: Disodium 6,6'-diapo-Ψ,Ψ-carotenedioate

Chemical formula

cis-Norbixin: C24H28O4

cis-Norbixin dipotassium salt: C24H26K2O4

cis-Norbixin disodium salt: C24H26Na2O4

Molecular weight

380,5 (acid), 456,7 (dipotassium salt), 424,5 (disodium salt)

Assay

Not less than 85 % colouring matter (expressed as norbixin)

E1 % 1cm 2870 at ca. 482 nm in 0,5 % potassium hydroxide solution

Description

Dark red-brown to red-purple powder

Identification

Solubility

Soluble in alkaline water, slightly soluble in ethanol

Spectrometry

The sample in 0,5 % potassium hydroxide solution shows absorbance maxima at about 453 nm and 482 nm

Purity

Residual Solvents

Acetone: Not more than 30 mg/kg

Methanol: Not more than 50 mg/kg

Hexane: Not more than 25 mg/kg

Ethanol:

Isopropyl alcohol:

Ethyl acetate:

not more than 50 mg/kg, singly or in combination

Arsenic

Not more than 2 mg/kg

Lead

Not more than 1 mg/kg

Mercury

Not more than 1 mg/kg

Cadmium

Not more than 0,5 mg/kg

Synonyms

Annatto F, Orlean, Terre orellana, L. Orange, CI Natural Orange 4

Definition

Alkali-processed norbixin (acid-precipitated) is prepared by the extraction of the outer coating of the seeds of the annatto tree (Bixa orellana L.) with aqueous alkali. The bixin is hydrolysed to norbixin in hot alkaline solution and is acidified to precipitate the norbixin. The precipitate is filtered, dried and milled to give a granular powder.

Alkali-processed norbixin contains several coloured components; the major colouring principle is cis-norbixin, a minor colouring principle is trans-norbixin; thermal degradation products of norbixin may also be present as a result of processing.

Colour Index No

75120

Einecs

208-810-8

Chemical name

cis-Norbixin: 6,6'-Diapo-Ψ,Ψ-carotenedioic acid

cis-Norbixin dipotassium salt: Dipotassium 6,6'-diapo-Ψ,Ψ-carotenedioate

cis-Norbixin disodium salt: Disodium 6,6'-diapo-Ψ,Ψ-carotenedioate

Chemical formula

cis-Norbixin: C24H28O4

cis-Norbixin dipotassium salt: C24H26K2O4

cis-Norbixin disodium salt: C24H26Na2O4

Molecular weight

380,5 (acid), 456,7 (dipotassium salt), 424,5 (disodium salt)

Assay

Not less than 35 % colouring matter (expressed as norbixin)

E1 % 1cm 2870 at ca. 482 nm in 0,5 % potassium hydroxide solution

Description

Dark red-brown to red-purple powder

Identification

Solubility

Soluble in alkaline water, slightly soluble in ethanol

Spectrometry

The sample in 0,5 % potassium hydroxide solution shows absorbance maxima at about 453 nm and 482 nm

Purity

Arsenic

Not more than 2 mg/kg

Lead

Not more than 1 mg/kg

Mercury

Not more than 1 mg/kg

Cadmium

Not more than 0,5 mg/kg

Synonyms

Annatto G, Orlean, Terre orellana, L. Orange, CI Natural Orange 4

Definition

Alkali-processed norbixin (not acid-precipitated) is prepared by the extraction of the outer coating of the seeds of the annatto tree (Bixa orellana L.) with aqueous alkali. The bixin is hydrolysed to norbixin in hot alkaline solution. The precipitate is filtered, dried and milled to give a granular powder. Extracts contain mainly the potassium or sodium salt of norbixin as the major colouring matter.

Alkali-processed norbixin (not acid-precipitated) contains several coloured components; the major colouring principle is cis-norbixin, a minor colouring principle is trans-norbixin; thermal degradation products of norbixin may also be present as a result of processing.

Colour Index No

75120

Einecs

208-810-8

Chemical name

cis-Norbixin: 6,6'-Diapo-Ψ,Ψ-carotenedioic acid

cis-Norbixin dipotassium salt: Dipotassium 6,6'-diapo-Ψ,Ψ-carotenedioate

cis-Norbixin disodium salt: Disodium 6,6'-diapo-Ψ,Ψ-carotenedioate

Chemical formula

cis-Norbixin: C24H28O4

cis-Norbixin dipotassium salt: C24H26K2O4

cis-Norbixin disodium salt: C24H26Na2O4

Molecular weight

380,5 (acid), 456,7 (dipotassium salt), 424,5 (disodium salt)

Assay

Not less than 15 % colouring matter (expressed as norbixin)

E1 % 1cm 2870 at ca. 482 nm in 0,5 % potassium hydroxide solution

Description

Dark red-brown to red-purple powder

Identification

Solubility

Soluble in alkaline water, slightly soluble in ethanol

Spectrometry

The sample in 0,5 % potassium hydroxide solution shows absorbance maxima at about 453 nm and 482 nm

Purity

Arsenic

Not more than 2 mg/kg

Lead

Not more than 1 mg/kg

Mercury

Not more than 1 mg/kg

Cadmium

Not more than 0,5 mg/kg

Synonyms

Paprika Oleoresin

Definition

Paprika extract is obtained by solvent extraction of the strains of paprika, which consists of the ground fruits pods, with or without seeds, of Capsicum annuum L., and contains the major colouring principles of this spice. The major colouring principles are capsanthin and capsorubin. A wide variety of other coloured compounds is known to be present.

Only the following solvents may be used in the extraction: methanol, ethanol, acetone, hexane, dichloromethane, ethyl acetate, propan-2-ol and carbon dioxide.

Colour Index No

Einecs

Capsanthin: 207-364-1, capsorubin: 207-425-2

Chemical name

Capsanthin: (3R, 3′S, 5′R)-3,3′-dihydroxy-β,κ-carotene-6-one

Capsorubin: (3S, 3′S, 5R, 5R′)-3,3′-dihydroxy-κ,κ-carotene-6,6′-dione

Chemical formula

Capsanthin:

C40H56O3

Capsorubin:

C40H56O4

Molecular weight

Capsanthin:

584,85

Capsorubin:

600,85

Assay

Paprika extract: content not less than 7,0 % carotenoids

Capsanthin/capsorubin: not less than 30 % of total carotenoids

Description

Dark-red viscous liquid

Identification

Spectrometry

Maximum in acetone at ca. 462 nm

Colour reaction

A deep blue colour is produced by adding one drop of sulphuric acid to one drop of sample in 2-3 drops of chloroform

Purity

Solvent residues

Ethyl acetate

Methanol

Ethanol

Acetone

Hexane

Propan-2-ol

Dichloromethane:

not more than 10 mg/kg

Capsaicin

Not more than 250 mg/kg

Arsenic

Not more than 3 mg/kg

Lead

Not more than 2 mg/kg

Mercury

Not more than 1 mg/kg

Cadmium

Not more than 1 mg/kg

Synonyms

Lycopene from chemical synthesis

Definition

Synthetic lycopene is a mixture of geometric isomeres of lycopenes and is produced by the Wittig condensation of synthetic intermediates commonly used in the production of other carotenoids used in food. Synthetic lycopene consists predominantly of all-trans-lycopene together with 5-cis-lycopene and minor quantities of other isomers. Commercial lycopene preparations intended for use in food are formulated as suspensions in edible oils or water-dispersible or water-soluble powder.

Colour Index No

75125

Einecs

207-949-1

Chemical name

ψ,ψ-carotene, all-trans-lycopene, (all-E)-lycopene, (all-E)-2,6,10,14,19,23,27,31-octamethyl-2,6,8,10,12,14,16,18,20,22,24,26,30-dotriacontatridecaene

Chemical formula

C40H56

Molecular weight

536,85

Assay

Not less than 96 % total lycopenes (not less than 70 % all-trans-lycopene)

at 465-475 nm in hexane (for 100 % pure all-trans-lycopene) is 3 450

Description

Red crystalline powder

Identification

Spectrophotometry

A solution in hexane shows an absorption maximum at approximately 470 nm

Test for carotenoids

The colour of the solution of the sample in acetone disappears after successive additions of a 5 % solution of sodium nitrite and 1N sulphuric acid

Solubility

Insoluble in water, freely soluble in chloroform

Properties of 1 % solution in chloroform

Is clear and has intensive red-orange colour

Purity

Loss on drying

Not more than 0,5 % (40 °C, 4 h at 20 mm Hg)

Apo-12’-lycopenal

Not more than 0,15 %

Triphenyl phosphine oxide

Not more than 0,01 %

Solvent residues

Methanol not more than 200 mg/kg,

Hexane, Propan-2-ol: Not more than 10 mg/kg each.

Dichloromethane: Not more than 10 mg/kg (in commercial preparations only)

Lead

Not more than 1 mg/kg

Synonyms

Natural Yellow 27

Definition

Lycopene is obtained by solvent extraction of red tomatoes (Lycopersicon esculentum L.) with subsequent removal of the solvent. Only the following solvent may be used: carbon dioxide, ethyl acetate, acetone, propan-2-ol, methanol, ethanol and hexane. The major colouring principle of tomatoes is lycopene; minor amounts of other carotenoid pigments may be present. Besides the colour pigments the product may contain oil, fats, waxes and flavour components naturally occurring in tomatoes.

Colour Index No

75125

Einecs

207-949-1

Chemical name

Ψ,Ψ-carotene, all-trans-lycopene, (all-E)-lycopene, (all-E)-2,6,10,14,19,23,27,31-octamethyl-2,6,8,10,12,14,16,18,20,22,24,26,30-dotriacontatridecaene

Chemical formula

C40H56

Molecular weight

536,85

Assay

at 465-475 nm in hexane (for 100 % pure all-trans-lycopene) is 3 450 .

Content not less than 5 % total colouring matters

Description

Dark red viscous liquid

Identification

Spectrophotometry

Maximum in hexane at ca. 472 nm

Purity

Solvent residues

Propan-2-ol

Hexane

Acetone

Ethanol

Methanol

Ethylacetate

Sulphated ash

Not more than 1 %

Mercury

Not more than 1 mg/kg

Cadmium

Not more than 1 mg/kg

Arsenic

Not more than 3 mg/kg

Lead

Not more than 2 mg/kg

Synonyms

Natural Yellow 27

Definition

Lycopene from Blakeslea trispora is extracted from the fungal biomass and purified by crystallisation and filtration. It consists predominantly of all-trans-lycopene. It also contains minor quantities of other carotenoids. Propan-2-ol and isobutyl acetate are the only solvents used in the manufacture. Commercial lycopene preparations intended for use in food are formulated as suspensions in edible oils or water-dispersible or water-soluble powder.

Colour Index No

75125

Einecs

207-949-1

Chemical name

Ψ,Ψ-carotene, all-trans-lycopene, (all-E)-lycopene, ((all-E)-2,6,10,14,19,23,27,31-octamethyl-2,6,8,10,12,14,16,18,20,22,24,26,30-dotriacontatridecaene

Chemical formula

C40H56

Molecular weight

536,85

Assay

Not less than 95 % total lycopenes and not less than 90 % all-trans-lycopene of all colouring matters

at 465-475 nm in hexane (for 100 % pure all-trans-lycopene) is 3 450

Description

Red crystalline powder

Identification

Spectrophotometry

A solution in hexane shows an absorption maximum at approximately 470 nm

Test of carotenoids

The colour of the solution of the sample in acetone disappears after successive additions of a 5 % solution of sodium nitrite and 1N sulphuric acid

Solubility

Insoluble in water, freely soluble in chloroform

Properties of 1 % solution in chloroform

Is clear and has intensive red-orange colour

Purity

Loss on drying

Not more than 0,5 % (40 °C, 4 h at 20 mm Hg)

Other carotenoids

Not more than 5 %

Solvent residues

Propan-2-ol: not more than 0,1 %

Isobutyl acetate: not more than 1,0 %

Dichloromethane: not more than 10 mg/kg (in commercial preparations only)

Sulphated ash

Not more than 0,3 %

Lead

Not more than 1 mg/kg

Synonyms

CI Food Orange 6

Definition

These specifications apply predominantly to the all-trans isomer of β-apo-8′-carotenal together with minor amounts of other carotenoids. Diluted and stabilised forms are prepared from β-apo-8′-carotenal meeting these specifications and include solutions or suspensions of ß-apo-8′carotenal in edible fats or oils, emulsions and water dispersible powders. These preparations may have different cis/trans isomer ratios.

Colour Index No

40820

Einecs

214-171-6

Chemical name

β-Apo-8′-carotenal; trans-β-Apo-8′carotene-aldehyde

Chemical formula

C30H40O

Molecular weight

416,65

Assay

Not less than 96 % of total colouring matters

Description

Dark violet crystals with metallic lustre or crystalline powder

Identification

Spectrometry

Maximum in cyclohexane at 460-462 nm

Purity

Sulphated ash

Not more than 0,1 %

Subsidiary colouring matters

Carotenoids other than β-apo-8′-carotenal:

not more than 3,0 % of total colouring matters

Arsenic

Not more than 3 mg/kg

Lead

Not more than 2 mg/kg

Mercury

Not more than 1 mg/kg

Cadmium

Not more than 1 mg/kg

Synonyms

Mixed Carotenoids; Xanthophylls

Definition

Lutein is obtained by solvent extraction of the strains of edible fruits and plants, grass, lucerne (alfalfa) and Tagetes erecta. The main colouring principle consists of carotenoids of which lutein and its fatty acid esters account for the major part. Variable amounts of carotenes will also be present. Lutein may contain fats, oils and waxes naturally occurring in the plant material.

Only the following solvents may be used for the extraction: methanol, ethanol, propan-2-ol, hexane, acetone, methyl ethyl ketone and carbon dioxide

Colour Index No

Einecs

204-840-0

Chemical name

3,3′-dihydroxy-d-carotene

Chemical formula

C40H56O2

Molecular weight

568,88

Assay

Content of total colouring matter not less than 4 % calculated as lutein

Description

Dark, yellowish brown liquid

Identification

Spectrometry

Maximum in chloroform/ethanol (1:9) at ca. 445 nm

Purity

Solvent residues

Acetone

Methyl ethyl ketone

Methanol

Ethanol

Propan-2-ol

Hexane

Arsenic

Not more than 3 mg/kg

Lead

Not more than 3 mg/kg

Mercury

Not more than 1 mg/kg

Cadmium

Not more than 1 mg/kg

Synonyms

CI Food Orange 8

Definition

These specifications apply to predominantly all-trans isomers of canthaxanthin together with minor amounts of other carotenoids. Diluted and stabilised forms are prepared from canthaxanthin meeting these specifications and include solutions or suspensions of canthaxanthin in edible fats or oils, emulsions and water dispersible powders. These preparations may have different cis/trans isomer ratios.

Colour Index No

40850

Einecs

208-187-2

Chemical name

β-Carotene-4,4′-dione; canthaxanthin; 4,4′-dioxo-β-carotene

Chemical formula

C40H52O2

Molecular weight

564,86

Assay

Not less than 96 % of total colouring matters (expressed as canthaxanthin)

at ca. 485 nm in chloroform

at 468-472 nm in cyclohexane

at 464-467 nm in petroleum ether

Description

Deep violet crystals or crystalline powder

Identification

Spectrometry

Maximum in chloroform at ca. 485 nm

Maximum in cyclohexane at 468-472 nm

Maximum in petroleum ether at 464-467 nm

Purity

Sulphated ash

Not more than 0,1 %

Subsidiary colouring matters

Carotenoids other than canthaxanthin: not more than 5,0 % of total colouring matters

Arsenic

Not more than 3 mg/kg

Lead

Not more than 2 mg/kg

Mercury

Not more than 1 mg/kg

Cadmium

Not more than 1 mg/kg

Synonyms

Beet Red

Definition

Beet red is obtained from the roots of strains of red beets (Beta vulgaris L. var. rubra) by pressing crushed beet as press juice or by aqueous extraction of shredded beet roots and subsequent enrichment in the active principle. The colour is composed of different pigments all belonging to the class betalaine. The main colouring principle consists of betacyanins (red) of which betanin accounts for 75-95 %. Minor amounts of betaxanthin (yellow) and degradation products of betalaines (light brown) may be present.

Besides the colour pigments the juice or extract consists of sugars, salts, and/or proteins naturally occurring in red beets. The solution may be concentrated and some products may be refined in order to remove most of the sugars, salts and proteins.

Colour Index No

Einecs

231-628-5

Chemical name

(S-(R′,R′)-4-(2-(2-Carboxy-5(β-D-glucopyranosyloxy)-2,3-dihydro-6-hydroxy-1H-indol-1-yl)ethenyl)-2,3-dihydro-2,6-pyridine-dicarboxylic acid; 1-(2-(2,6-dicarboxy-1,2,3,4-tetrahydro-4-pyridylidene)ethylidene)-5-β-D-glucopyranosyloxy)-6-hydroxyindolium-2-carboxylate

Chemical formula

Betanin: C24H26N2O13

Molecular weight

550,48

Assay

Content of red colour (expressed as betanine) is not less than 0,4 %

Description

Red or dark red liquid, paste, powder or solid

Identification

Spectrometry

Maximum in water of pH 5 at ca. 535 nm

Purity

Nitrate

Not more than 2 g nitrate anion/g of red colour (as calculated from assay).

Arsenic

Not more than 3 mg/kg

Lead

Not more than 2 mg/kg

Mercury

Not more than 1 mg/kg

Cadmium

Not more than 1 mg/kg

Synonyms

Definition

Anthocyanins are obtained by maceration or extraction with sulphited water, acidified water, carbon dioxide, methanol or ethanol from the strains of vegetables and edible fruits, with subsequent concentration and/or purification if necessary. The resulting product can be transformed into powder by an industrial drying process. Anthocyanins contain common components of the source material, namely anthocyanine, organic acids, tannins, sugars, minerals etc., but not necessarily in the same proportions as found in the source material. Ethanol may naturally be present as a result of the maceration process. The colouring principle is anthocyanin. Products are marketed according to their colour strength as determined by the assay. Colour content is not expressed using quantitative units.

Colour Index No

Einecs

208-438-6 (cyanidin); 205-125-6 (peonidin); 208-437-0 (delphinidin); 211-403-8 (malvidin); 205-127-7 (pelargonidin); 215-849-4 (petunidin)

Chemical name

3,3′,4′,5,7-Pentahydroxy-flavylium chloride (cyanidin)

3,4′,5,7-Tetrahydroxy-3′-methoxyflavylium chloride (peonidin)

3,4′,5,7-Tetrahydroxy-3′,5′-dimethoxyflavylium chloride (malvidin)

3,5,7-Trihydroxy-2-(3,4,5,trihydroxyphenyl)-1-benzopyrylium chloride (delphinidin)

3,3′4′,5,7-Pentahydroxy-5′-methoxyflavylium chloride (petunidin)

3,5,7-Trihydroxy-2-(4-hydroxyphenyl)-1-benzopyrilium chloride (pelargonidin)

Chemical formula

Cyanidin: C15H11O6Cl

Peonidin: C16H13O6Cl

Malvidin: C17H15O7Cl

Delphinidin: C15H11O7Cl

Petunidin: C16H13O7Cl

Pelargonidin: C15H11O5Cl

Molecular weight

Cyanidin: 322,6

Peonidin: 336,7

Malvidin: 366,7

Delphinidin: 340,6

Petunidin: 352,7

Pelargonidin: 306,7

Assay

Description

Purplish-red liquid, powder or paste, having a slight characteristic odour

Identification

Spectrometry

Maximum in methanol with 0,01 % conc. HCl

Cyanidin: 535 nm

Peonidin: 532 nm

Malvidin: 542 nm

Delphinidin: 546 nm

Petunidin: 543 nm

Pelargonidin: 530 nm

Purity

Solvent residues

Methanol

Not more than 50 mg/kg

Ethanol

Not more than 200 mg/kg

Sulfur dioxide

Not more than 1 000  mg/kg per percent pigment

Arsenic

Not more than 3 mg/kg

Lead

Not more than 2 mg/kg

Mercury

Not more than 1 mg/kg

Cadmium

Not more than 1 mg/kg

Synonyms

CI Pigment White 18; Chalk

Definition

Calcium carbonate is the product obtained from ground limestone or by the precipitation of calcium ions with carbonate ions.

Colour Index No

77220

Einecs

Calcium carbonate: 207-439-9

Limestone: 215-279-6

Chemical name

Calcium carbonate

Chemical formula

CaCO3

Molecular weight

100,1

Assay

Content not less than 98 % on the anhydrous basis

Description