(a) the design, production, maintenance and operation of aeronautical products, parts and appliances, as well as personnel and organisations involved in the design, production and maintenance of such products, parts and appliances;

(b) personnel and organisations involved in the operation of aircraft;

(c) the design, maintenance and operation of aerodromes, as well as personnel and organisations involved therein and, without prejudice to Community and national legislation on environment and land-use planning, the safeguarding of surroundings of aerodromes;

(d) the design, production and maintenance of aerodrome equipment, as well as personnel and organisations involved therein;

(e) the design, production and maintenance of systems and constituents for air traffic management and air navigation services (ATM/ANS), as well as personnel and organisations involved therein;

(f) ATM/ANS, as well as personnel and organisations involved therein.

(a) products, parts, appliances, personnel and organisations referred to in paragraph 1(a) and (b) while carrying out military, customs, police, search and rescue, firefighting, coastguard or similar activities or services. The Member States shall undertake to ensure that such activities or services have due regard as far as practicable to the objectives of this Regulation;

(b) aerodromes or part thereof, as well as equipment, personnel and organisations, referred to in paragraph 1(c) and (d), that are controlled and operated by the military;

(c) ATM/ANS, including systems and constituents, personnel and organisations, referred to in paragraph 1(e) and (f), that are provided or made available by the military. The Member States shall undertake to ensure that aircraft referred to in point (a) of this paragraph are separated, where appropriate, from other aircraft.

(a) to ensure a high uniform level of environmental protection;

(b) to facilitate the free movement of goods, persons and services;

(c) to promote cost-efficiency in the regulatory and certification processes and to avoid duplication at national and European level;

(d) to assist Member States in fulfilling their obligations under the Chicago Convention, by providing a basis for a common interpretation and uniform implementation of its provisions, and by ensuring that its provisions are duly taken into account in this Regulation and in the rules drawn up for its implementation;

(e) to promote Community views regarding civil aviation safety standards and rules throughout the world by establishing appropriate cooperation with third countries and international organisations;

(f) to provide a level playing field for all actors in the internal aviation market.

(a) the preparation, adoption and uniform application of all necessary acts;

(b) the recognition, without additional requirements, of certificates, licences, approvals or other documents granted to products, personnel and organisations in accordance with this Regulation and its implementing rules;

(c) the establishment of an independent European Aviation Safety Agency (hereinafter referred to as the Agency);

(d) the uniform implementation of all necessary acts by the national aviation authorities and the Agency within their respective areas of responsibility.

(a) ‘continuing oversight’ shall mean the tasks to be conducted to verify that the conditions under which a certificate has been granted continue to be fulfilled at any time during its period of validity, as well as the taking of any safeguard measure;

(b) ‘Chicago Convention’ shall mean the Convention on International Civil Aviation and its Annexes, signed in Chicago on 7 December 1944;

(c) ‘product’ shall mean an aircraft, engine or propeller;

(d) ‘parts and appliances’ shall mean any instrument, equipment, mechanism, part, apparatus, appurtenance, software or accessory, including communications equipment, that is used or intended to be used in operating or controlling an aircraft in flight; it shall include parts of an airframe, engine or propeller, or equipment used to manoeuvre the aircraft from the ground;

(da) ‘ATM/ANS constituents’ shall mean any constituent as defined in Article 2(19) of Regulation (EC) No 549/2004 of the European Parliament and of the Council of 10 March 2004 laying down the framework for the creation of the single European sky (the framework Regulation) ( 10 );

(e) ‘certification’ shall mean any form of recognition that a product, part or appliance, organisation or person complies with the applicable requirements including the provisions of this Regulation and its implementing rules, as well as the issuance of the relevant certificate attesting such compliance;

(f) ‘qualified entity’ shall mean a body which may be allocated a specific certification task by, and under the control and the responsibility of, the Agency or a national aviation authority;

(g) ‘certificate’ shall mean any approval, licence or other document issued as the result of certification;

(h) ‘operator’ shall mean any legal or natural person, operating or proposing to operate one or more aircraft or one or more aerodromes;

(i) ‘commercial operation’ shall mean any operation of an aircraft, in return for remuneration or other valuable consideration, which is available to the public or, when not made available to the public, which is performed under a contract between an operator and a customer, where the latter has no control over the operator;

(j) ‘complex motor-powered aircraft’ shall mean:

(k) ‘flight simulation training device’ shall mean any type of device in which flight conditions are simulated on the ground; they include flight simulators, flight training devices, flight and navigation procedures trainers and basic instrument training devices;

(l) ‘rating’ shall mean a statement entered on a licence, setting forth privileges, special conditions or limitations pertaining thereto;

(m) ‘aerodrome’ shall mean a defined area (including any buildings, installations and equipment) on land or water or on a fixed, fixed offshore or floating structure intended to be used either wholly or in part for the arrival, departure and surface movement of aircraft;

(n) ‘aerodrome equipment’ shall mean any equipment, apparatus, appurtenance, software or accessory, that is used or intended to be used to contribute to the operation of aircraft at an aerodrome;

(o) ‘apron’ shall mean a defined area intended to accommodate aircraft for purposes of loading or unloading passengers, mail or cargo, fuelling, parking or maintenance;

(p) ‘apron management service’ shall mean a service provided to manage the activities and the movement of aircraft and vehicles on an apron;

(q) ‘ATM/ANS’ shall mean the air traffic management functions as defined in Article 2(10) of Regulation (EC) No 549/2004, air navigation services defined in Article 2(4) of that Regulation, and services consisting in the origination and processing of data and formatting and delivering data to general air traffic for the purpose of safety-critical air navigation;

(r) ‘ATM/ANS system’ shall mean any combination of safety-related equipment and systems as defined in Article 2(39) of Regulation (EC) No 549/2004;

(s) ‘flight information service’ shall mean a service provided for the purpose of giving advice and information useful for the safe and efficient conduct of flights.

(a) designed or manufactured by an organisation for which the Agency or a Member State ensures safety oversight; or

(b) registered in a Member State, unless their regulatory safety oversight has been delegated to a third country and they are not used by a Community operator; or

(c) registered in a third country and used by an operator for which any Member State ensures oversight of operations or used into, within or out of the Community by an operator established or residing in the Community; or

(d) registered in a third country, or registered in a Member State which has delegated their regulatory safety oversight to a third country, and used by a third-country operator into, within or out of the Community

(a) have a paved runway of 800 metres or above; or

(b) exclusively serve helicopters;

— handles no more than 10 000 passengers per year, and

— handles no more than 850 movements related to cargo operations per year.

(a) products shall have a type-certificate. The type-certificate, and certification of changes to that type-certificate, including supplemental type-certificates, shall be issued when the applicant has shown that the product complies with a type-certification basis as specified in Article 20, established to ensure compliance with the essential requirements referred to in paragraph 1, and when it has no feature or characteristic making it unsafe for operation. The type-certificate shall cover the product, including all parts and appliances fitted thereon;

(b) the measures referred to in paragraph 5 may lay down a requirement for certification in respect of parts and appliances. The certificates for parts and appliances shall be issued when the applicant has shown that the parts and appliances comply with the detailed airworthiness specifications established to ensure compliance with the essential requirements referred to in paragraph 1;

(c) no aircraft shall be operated, unless it has a valid certificate of airworthiness. The certificate shall be issued when the applicant has shown that the aircraft conforms to the type design approved in its type-certificate and that relevant documentation, inspections and tests demonstrate that the aircraft is in condition for safe operation. This certificate of airworthiness shall remain valid as long as it is not suspended, revoked or terminated and as long as the aircraft is maintained in accordance with the essential requirements related to continuing airworthiness set out in point 1.d of Annex I and the measures adopted pursuant to paragraph 5;

(d) organisations responsible for the maintenance of products, parts and appliances shall demonstrate their capability and means to discharge the responsibilities associated with their privileges. Unless otherwise accepted these capabilities and means shall be recognised through the issuance of an organisation approval. The privileges granted to the approved organisation and the scope of the approval shall be specified in the terms of approval;

(e) organisations responsible for the design and manufacture of products, parts and appliances shall demonstrate their capability and means to discharge the responsibilities associated with their privileges. Unless otherwise accepted these capabilities and means shall be recognised through the issuance of an organisation approval. The privileges granted to the approved organisation and the scope of the approval shall be specified in the terms of approval;

(f) personnel responsible for the release of a product, part or appliance after maintenance may be required to hold an appropriate certificate (personnel certificate);

(g) the capability of maintenance training organisations to discharge the responsibilities associated with their privileges in relation to the issuance of the certificates referred to in point (f) may be recognised by the issuance of an approval.

(a) a permit to fly may be issued when it is shown that the aircraft is capable of performing safely a basic flight. It shall be issued with appropriate limitations, in particular to protect third parties' safety;

(b) a restricted certificate of airworthiness may be issued to aircraft for which a type certificate has not been issued according to paragraph 2(a). In this case, the aircraft shall be shown to comply with specific airworthiness specifications and deviations from the essential requirements referred to in paragraph 1 shall nevertheless ensure adequate safety with regard to the purpose. Aircraft eligible for these restricted certificates, and limitations for use of these aircraft, shall be defined according to the measures referred to in paragraph 5;

(c) when the number of aircraft of the same type eligible for a restricted certificate of airworthiness so justifies, a restricted type certificate may be issued and an appropriate type certification basis shall be established.

(a) conditions for establishing and notifying to an applicant the type-certification basis applicable to a product;

(b) conditions for establishing and notifying to an applicant the detailed airworthiness specifications applicable to parts and appliances;

(c) conditions for establishing and notifying to an applicant the specific airworthiness specifications applicable to aircraft eligible for a restricted certificate of airworthiness;

(d) conditions for issuing and disseminating mandatory information in order to ensure the continuing airworthiness of products;

(e) conditions for issuing, maintaining, amending, suspending or revoking type-certificates, restricted type-certificates, approval of changes to type-certificates, individual certificates of airworthiness, restricted certificates of airworthiness, permits to fly and certificates for products, parts or appliances, including:

(f) conditions to issue, maintain, amend, suspend or revoke organisation approvals required in accordance with paragraph 2(d), (e) and (g) and conditions under which such approvals need not be requested;

(g) conditions to issue, maintain, amend, suspend or revoke personnel certificates required in accordance with paragraph 2(f);

(h) responsibilities of the holders of certificates;

(i) how aircraft referred to in paragraph 1 which are not covered by paragraphs 2 or 4 are to show compliance with the essential requirements;

(j) how aircraft referred to in Article 4(1)(c) are to show compliance with the essential requirements.

(a) reflect the state of the art and the best practices in the field of airworthiness;

(b) take into account worldwide aircraft experience in service, and scientific and technical progress;

(c) allow for immediate reaction to established causes of accidents and serious incidents;

(d) do not impose on aircraft referred to in Article 4(1)(c) requirements which would be incompatible with the International Civil Aviation Organization (ICAO) obligations of Member States.

(a) the different ratings for pilots' licences and the medical certificates adequate for the different types of activities performed;

(b) the conditions for issuing, maintaining, amending, limiting, suspending or revoking licences, ratings for licences, medical certificates, approvals and certificates referred to in paragraphs 2, 3, 4 and 5, and the conditions under which such certificates and approvals need not be requested;

(c) the privileges and responsibilities of the holders of licences, ratings for licences, medical certificates, approvals and certificates referred to in paragraphs 2, 3, 4 and 5;

(d) the conditions for the conversion of existing national pilots' licences and of national flight engineers' licences into pilots' licences as well as the conditions for the conversion of national medical certificates into commonly recognised medical certificates;

(e) without prejudice to the provisions of bilateral agreements concluded in accordance with Article 12, the conditions for the acceptance of licences from third countries;

(f) how pilots of aircraft referred to in points (a)(ii), (d) and (f) of Annex II, when used for commercial air transportation, comply with the relevant essential requirements of Annex III.

(a) conditions to operate an aircraft in compliance with the essential requirements set out in Annex IV and, if applicable, Annex Vb;

(b) conditions for issuing, maintaining, amending, limiting, suspending or revoking the certificates referred to in paragraph 2 and the conditions under which a certificate shall be replaced by a declaration of the capability and means of the operator to discharge the responsibilities associated with the operation of the aircraft;

(c) privileges and responsibilities of the holders of certificates;

(d) conditions and procedures for the declaration by, and for the oversight of, operators referred to in paragraph 3 and the conditions under which a declaration shall be replaced by a demonstration of capability and means to discharge the responsibilities associated with the privileges of the operator recognised by the issuance of a certificate;

(e) conditions for issuing, maintaining, amending, limiting, suspending or revoking the cabin crew attestation referred to in paragraph 4;

(f) conditions under which operations shall be prohibited, limited or subject to certain conditions in the interest of safety;

(g) how operations of aircraft referred to in point (a)(ii) and points (d) and (h) of Annex II, when used for commercial air transportation, comply with the relevant essential requirements set out in Annex IV and, if applicable, Annex Vb.

— reflect the state of the art and the best practices in the field of air operations,

— define different types of operations and allow for related requirements and compliance demonstrations proportionate to the complexity of operations and the risk involved,

— take into account worldwide aircraft experience in service, and scientific and technical progress,

— with regard to commercial transportation by aeroplane, and without prejudice to the previous indent, be developed initially on the basis of the common technical requirements and administrative procedures specified in Annex III to Regulation (EEC) No 3922/91,

— be based on a risk assessment and shall be proportional to the scale and scope of the operation,

— allow for immediate reaction to established causes of accidents and serious incidents,

— not impose on aircraft referred to in Article 4(1)(c) requirements which would be incompatible with the ICAO obligations of Member States,

— take into account the safety aspects related to ATM/ANS.

(a) a certificate shall be required in respect of each aerodrome. The certificate and certification of changes to that certificate shall be issued when the applicant has shown that the aerodrome complies with the aerodrome certification basis set out in point (b), and that the aerodrome has no feature or characteristic making it unsafe for operation. The certificate shall cover the aerodrome, its operation and its safety-related equipment;

(b) the certification basis for an aerodrome shall consist of the following:

(c) the measures referred to in paragraph 5 may lay down a requirement of certification in respect of safety-critical aerodrome equipment. The certificate for such equipment shall be issued when the applicant has shown that the equipment complies with the detailed specifications established to ensure compliance with the essential requirements referred to in paragraph 1;

(d) organisations responsible for the operation of aerodromes shall demonstrate their capability and means to discharge the responsibilities associated with their privileges. These capabilities and means shall be recognised through the issuance of the certificate referred to in point (a). They may also be recognised through the issuance of a separate certificate if the Member State where the aerodrome is located so decides. The privileges granted to the certified organisation and the scope of the certificate, including a list of aerodromes to be operated, shall be specified in the certificate;

(e) by way of derogation from point (d), Member States may decide that providers of apron management services shall be allowed to declare their capability and means of discharging the responsibilities associated with the services provided.

(a) the conditions for establishing and notifying to an applicant the certification basis applicable to an aerodrome;

(b) the conditions for establishing and notifying to an applicant the detailed specifications applicable to aerodrome equipment;

(c) the conditions for issuing, maintaining, amending, suspending or revoking certificates for aerodromes and certificates for aerodrome equipment, including operating limitations related to the specific design of the aerodrome;

(d) the conditions for operating an aerodrome in compliance with the essential requirements set out in Annex Va and, if applicable, Annex Vb;

(e) the conditions for issuing, maintaining, amending, suspending or revoking the certificates referred to in paragraph 2(d);

(f) the responsibilities of the holders of certificates;

(g) the conditions for the acceptance and for the conversion of aerodrome certificates issued by Member States, including measures which are already authorised by the Member State concerned on the basis of notified deviations from Annex 14 of the Chicago Convention before the entry into force of this Regulation;

(h) the conditions for the decision not to permit exemptions referred to in Article 4(3b), including criteria for cargo aerodromes, the notification of exempted aerodromes and for the review of granted exemptions;

(i) the conditions under which operations shall be prohibited, limited or subject to certain conditions in the interest of safety;

(j) the conditions and procedures for the declaration by and for the oversight of service providers referred to in paragraph 2(e).

(a) reflect the state of the art and the best practices in the field of aerodromes and take into account the applicable ICAO Standards and Recommended Practices;

(b) be proportionate to the size, traffic, category and complexity of the aerodrome and nature and volume of operations thereon;

(c) take into account worldwide aerodrome operation experience, and scientific and technical progress;

(d) allow for immediate reaction to established causes of accidents and serious incidents;

(e) provide for the necessary flexibility for customised compliance.

(a) the conditions for the provision of ATM/ANS in compliance with the essential requirements set out in Annex Vb and, if applicable, in Annex Va;

(b) the conditions for establishing and notifying to an applicant the detailed specifications applicable to ATM/ANS systems and constituents;

(c) the conditions for issuing, maintaining, amending, suspending or revoking the certificates referred to in paragraphs 2 and 4;

(d) the responsibilities of the holders of certificates;

(e) the conditions and procedures for the declaration by, and for the oversight of service providers referred to in paragraph 3;

(f) the conditions under which operations shall be prohibited, limited or subject to certain conditions in the interest of safety.

(a) reflect the state of the art and the best practices in the field of ATM/ANS;

(b) be proportionate to the type and complexity of the services provided;

(c) take into account worldwide ATM/ANS experience, and scientific and technical progress;

(d) be developed using as far as practicable the relevant provisions of Regulation (EC) No 549/2004 and of Regulation (EC) No 550/2004 of the European Parliament and of the Council of 10 March 2004 on the provision of air navigation services in the single European sky (the service provision Regulation) ( 13 ), Regulation (EC) No 551/2004 and Regulation (EC) No 552/2004 of the European Parliament and of the Council of 10 March 2004 on the interoperability of the European Air Traffic Management network (the interoperability Regulation) ( 14 ) and provide for transitional mechanisms to ensure the continuity of certificates already granted under those Regulations; initially they shall include the safety provisions of those Regulations and, where appropriate, in case of future amendments, take into account latest scientific and technical progress;

(e) allow for immediate reaction to established causes of accidents and serious incidents.

(a) the different ratings and endorsements for air traffic controllers’ licences;

(b) the conditions for issuing, maintaining, amending, limiting, suspending or revoking licences, ratings and endorsements for licences, medical certificates, approvals and certificates, and the conditions under which such certificates and approvals need not be requested, while providing for transitional mechanisms to ensure the continuity of approvals and certificates already granted;

(c) the privileges and responsibilities of the holders of licences, ratings and endorsements for licences, medical certificates, approvals and certificates;

(d) the conditions for the acceptance and for the conversion of air traffic controllers’ licences as well as the conditions for the acceptance and for the conversion of national medical certificates into commonly recognised medical certificates.

(a) how aircraft referred to in Article 4(1)(d), or crew, which do not hold a standard ICAO certificate of airworthiness or licence, may be authorised to operate into, within or out of the Community;

(b) conditions to operate an aircraft in compliance with the provisions of paragraph 1;

(c) conditions for issuing, maintaining, amending, limiting, suspending or revoking the operator's authorisation referred to in paragraph 2, taking into account the certificates issued by the state of registry or the state of the operator, without prejudice to Regulation (EC) No 2111/2005 and its implementing rules;

(d) privileges and responsibilities of the holders of authorisations;

(e) conditions and procedures for the declaration by, and for the oversight of, operators referred to in paragraph 3;

(f) conditions under which operations shall be prohibited, limited or subject to certain conditions in the interest of safety in accordance with Article 22(1).

(a) use is made, as appropriate, of ICAO recommended practices and guidance documents;

(b) no requirement exceeds what is required from aircraft referred to in Article 4(1)(b), and from the operators of such aircraft;

(c) use is made, where appropriate, of measures issued in accordance with Articles 5(5) and 8(5);

(d) the process by which authorisations are obtained is simple, proportionate, cost-effective and efficient in all cases, allowing for requirements and compliance demonstrations proportionate to the complexity of operations and the risk involved. The process shall in particular take account of:

(e) safety aspects related to ATM/ANS are taken into account.

(a) conditions for the collection, exchange and dissemination of information;

(b) conditions for conducting ramp inspections, including systematic ones;

(c) conditions for the grounding of aircraft that do not comply with the requirements of this Regulation or its implementing rules.

(a) In the absence of an agreement concluded by the Community, a Member State or the Agency may issue certificates on the basis of certifications issued by the competent authorities of a third country in application of an agreement concluded by that Member State with the third country in question before the entry into force of the related provisions of this Regulation and notified to the Commission and the other Member States. The Agency may also issue such certificates on behalf of any Member State in application of an agreement concluded by one of the Member States with the third country in question.

(b) If the Commission considers that:

it may, in accordance with the procedure laid down in Article 65(2), require the Member State concerned to modify the agreement, to suspend its application or to renounce it, in accordance with Article 307 of the Treaty.

(c) Member States shall take the necessary measures to renounce agreements as soon as possible after the entry into force of an agreement between the Community and the third country in question, for those domains covered by that latter agreement.

(a) The Agency shall assess whether the safety problem can be addressed within the powers conferred on it in accordance with Article 18(d). In this case it shall, within one month of being notified pursuant to paragraph 1, take the appropriate decision.

(b) If the Agency concludes that the safety problem cannot be addressed in accordance with point (a), it shall, within the period referred to in that point, issue a recommendation in accordance with Article 18(b) as to whether this Regulation or its implementing rules should be amended and whether the notified measures should be withdrawn or maintained.

(a) to provide persons and organisations with the information they need to improve aviation safety;

(b) to limit the dissemination of information to what is strictly required for the purpose of its users, in order to ensure appropriate confidentiality of that information.

(a) undertake any task and formulate opinions on all matters covered by Article 1(1);

(b) assist the Commission by preparing measures to be taken for the implementation of this Regulation. Where these comprise technical rules and in particular rules relating to construction, design and operational aspects, the Commission may not change their content without prior coordination with the Agency. The Agency shall also provide the Commission with the necessary technical, scientific and administrative support to carry out its tasks;

(c) take the necessary measures within the powers conferred on it by this Regulation or other Community legislation;

(d) conduct inspections and investigations as necessary to fulfil its tasks;

(e) in its fields of competence, carry out, on behalf of Member States, functions and tasks ascribed to them by applicable international conventions, in particular the Chicago Convention.

(a) issue opinions addressed to the Commission;

(b) issue recommendations addressed to the Commission for the application of Article 14;

(c) issue certification specifications and acceptable means of compliance, as well as any guidance material for the application of this Regulation and its implementing rules;

(d) take the appropriate decisions for the application of Articles 20, 21, 22, 22a, 22b, 23, 54 and 55 including the granting of exemptions to holders of certificates it has issued, from the substantive requirements laid down in this Regulation and its implementing rules in the event of unforeseen urgent operational circumstances or operational needs of a limited duration, provided that the level of safety is not affected, that they are granted for a period not exceeding two months, that they are notified to the Commission and that they are not renewed;

(e) issue the reports following standardisation inspections carried out pursuant to Articles 24(1) and 54.

(a) certification specifications and acceptable means of compliance; and

(b) guidance material;

(a) for each product for which a type-certificate or a change to a type-certificate is requested, establish and notify the type-certification basis. That certification basis consists of the applicable airworthiness code, the provisions for which an equivalent level of safety has been accepted and the special detailed technical specifications necessary when the design features of a particular product or the experience in operation render any of the airworthiness code provisions inadequate or inappropriate to ensure conformity with essential requirements;

(b) for each product for which a restricted certificate of airworthiness is requested, establish and notify the specific airworthiness specifications;

(c) for each part or appliance for which a certificate is requested, establish and notify the detailed airworthiness specifications;

(d) for each product for which environmental certification is required in accordance with Article 6, establish and notify the appropriate environmental requirements;

(e) conduct, itself or through national aviation authorities or qualified entities, investigations associated with products, parts and appliances certification;

(f) issue the appropriate type-certificates or associated changes;

(g) issue certificates for parts and appliances;

(h) issue the appropriate environmental certificates;

(i) amend, suspend or revoke the relevant certificate when the conditions according to which it was issued are no longer fulfilled or if the legal or natural person holding the certificate fails to fulfil the obligations imposed on it by this Regulation or its implementing rules;

(j) ensure the continuing airworthiness functions associated with the products, parts and appliances which are under its oversight, including reacting without undue delay to a safety problem and issuing and disseminating the applicable mandatory information;

(k) for aircraft for which a permit to fly is to be issued, establish airworthiness standards and procedures to comply with Article 5(4)(a);

(l) issue permits to fly to aircraft for the purpose of certification under the control of the Agency, in agreement with the Member State in which the aircraft is registered or is to be registered.

(a) conduct, itself or through national aviation authorities or qualified entities, inspections and audits of the organisations it certifies;

(b) issue and renew the certificates of:

(c) amend, suspend or revoke the relevant organisation certificate when the conditions according to which it was issued are no longer fulfilled, or if the organisation concerned fails to fulfil the obligations imposed on it by this Regulation or its implementing rules.

(a) conduct, itself or through national aviation authorities or qualified entities, investigations and audits of the organisations it certifies and, where relevant, their personnel;

(b) issue and renew the certificates of pilot training organisations and aero-medical centres located outside the territory of the Member States and, where relevant, their personnel;

(c) amend, limit, suspend or revoke the relevant certificate when the conditions according to which it was issued by it are no longer fulfilled, or if the legal or natural person holding the certificate fails to fulfil the obligations imposed on it by this Regulation or its implementing rules.

(a) conduct, itself or through national aviation authorities or qualified entities, technical inspections of the devices it certifies;

(b) issue and renew the certificates of:

(c) amend, limit, suspend or revoke the relevant certificate when the conditions according to which it was issued are no longer fulfilled, or if the legal or natural person holding the certificate fails to fulfil the obligations imposed on it by this Regulation or its implementing rules.

(a) the Agency shall issue the applicable certification specifications to ensure compliance with essential requirements and, as appropriate, the related implementing rules. Initially, the implementing rules shall include all substantive provisions of Subpart Q of Annex III to Regulation (EEC) No 3922/91, taking into account the latest scientific and technical evidence;

(b) a Member State may approve individual flight time specification schemes which deviate from the certification specifications referred to in point (a). In this case the Member State shall without delay notify the Agency, the Commission and the other Member States that it intends to grant approval for such an individual scheme;

(c) upon notification the Agency shall, within one month, assess the individual scheme on the basis of a scientific and medical evaluation. Thereafter the Member State concerned may grant the approval as notified, unless the Agency has discussed the scheme with that Member State and proposed changes thereto. Should the Member State agree with these changes, it may grant the approval accordingly;

(d) in the event of unforeseen urgent operational circumstances or operational needs of limited duration and non-repetitive nature, derogations to certification specifications may apply provisionally until the Agency expresses its opinion;

(e) should a Member State disagree with the Agency's conclusions concerning an individual scheme, it shall refer the issue to the Commission to decide whether that scheme complies with the safety objectives of this Regulation, in accordance with the procedure referred to in Article 65(3);

(f) the contents of individual schemes which are acceptable to the Agency, or on which the Commission has taken a positive decision in accordance with point (e), shall be published.

(a) conduct, itself or through national aviation authorities or qualified entities, inspections, and audits of the organisations it certifies;

(b) issue and renew certificates of organisations located outside the territory subject to the provisions of the Treaty, responsible for providing services in the airspace of the territory to which the Treaty applies;

(c) issue and renew certificates of organisations providing pan-European services;

(d) amend, suspend or revoke the relevant certificate, when the conditions according to which it was issued are no longer fulfilled or if the holder of the certificate fails to fulfil the obligations imposed on it by this Regulation or by its implementing rules.

(a) conduct, itself or through national aviation authorities or qualified entities, investigations and audits of the organisations it certifies and, where relevant, their personnel;

(b) issue and renew the certificates of air traffic controller training organisations located outside the territory of the Member States and, where relevant, their personnel;

(c) amend, suspend or revoke the relevant certificate when the conditions according to which it was issued by it are no longer fulfilled, or if the legal or natural person holding the certificate fails to fulfil the obligations imposed on it by this Regulation or its implementing rules.

(a) conduct, itself or through national aviation authorities or qualified entities, investigations and audits;

(b) issue and renew the authorisations referred to in Article 9(2), unless a Member State carries out the functions and tasks of the state of operator in respect of these operators;

(c) amend, limit, suspend or revoke the relevant authorisation when the conditions according to which it was issued by it are no longer fulfilled, or if the organisation concerned fails to fulfil the obligations imposed on it by this Regulation or its implementing rules.

(a) receive the declarations referred to in Article 9(3); and

(b) conduct, itself or through national aviation authorities or qualified entities, the oversight of operators from which it has received a declaration.

(a) impose on the persons and the undertakings to which the Agency has issued a certificate, fines, where, intentionally or negligently, the provisions of this Regulation and its implementing rules have been breached;

(b) impose, on the persons and undertakings to which the Agency has issued a certificate, periodic penalty payments, calculated from the date set in the decision, in order to compel those persons and undertakings to comply with the provisions of this Regulation and its implementing rules.

(a) detailed criteria for establishing the amount of the fine or periodic penalty payment; and

(b) procedures for enquiries, associated measures and reporting, as well as rules of procedure for decision-making, including provisions on rights of defence, access to file, legal representation, confidentiality and temporal provisions and the quantification and collection of fines and periodic penalty payments.

(a) the safety review referred to in Article 15(4);

(b) opinions addressed to the Commission pursuant to Article 19(1);

(c) the annual general report and programme of work referred to in Article 33(2)(b) and (c) respectively.

(a) appoint the Executive Director, and the Directors on a proposal from the Executive Director, in accordance with Article 39;

(b) adopt the annual general report on the Agency's activities and forward it by 15 June at the latest to the European Parliament, the Council, the Commission, the Court of Auditors and the Member States; acting on behalf of the Agency, it shall forward annually to the European Parliament and the Council (hereinafter referred to as budgetary authority) any information relevant to the outcome of the evaluation procedures, in particular, information concerning the effects or consequences of changes in the tasks assigned to the Agency;

(c) before ►M2  30 November ◄ each year, and after receiving the opinion of the Commission, adopt the Agency's programme of work for the coming year and forward it to the European Parliament, the Council, the Commission and the Member States; this programme of work shall be adopted without prejudice to the annual Community budgetary procedure and the Community legislative programme in relevant areas of aviation safety; the opinion of the Commission shall be attached to the programme of work;

(d) adopt guidelines for the allocation of certification tasks to national aviation authorities and qualified entities in agreement with the Commission;

(e) establish procedures for making decisions by the Executive Director as referred to in Articles 52 and 53;

(f) carry out its functions relating to the Agency's budget pursuant to Articles 59, 60 and 63;

(g) appoint the members of the Board of Appeal pursuant to Article 41;

(h) exercise disciplinary authority over the Executive Director and over the Directors in agreement with the Executive Director;

(i) give its opinion on the measures relating to fees and charges as referred to in Article 64(1);

(j) establish its Rules of Procedure;

(k) decide on the linguistic arrangements for the Agency;

(l) complement, where appropriate, the list of documents referred to in Article 32(1);

(m) establish the organisational structure of the Agency and adopt the Agency's staffing policy.

(a) to approve the measures of the Agency as defined in Article 18 within the limits specified by this Regulation, its implementing rules and any applicable law;

(b) to decide on inspections and investigations as provided for in Articles 54 and 55;

(c) to allocate certification tasks to national aviation authorities or qualified entities according to guidelines set by the Management Board;

(d) to undertake any international functions and technical cooperation with third countries pursuant to Article 27;

(e) to take all necessary steps, including the adoption of internal administrative instructions and the publication of notices, to ensure the functioning of the Agency in accordance with the provisions of this Regulation;

(f) to prepare each year a draft general report and submit it to the Management Board;

(g) to exercise in respect of the Agency's staff the powers laid down in Article 29(2);

(h) to draw up estimates of the revenues and expenditure of the Agency pursuant to Article 59, and to implement the budget pursuant to Article 60;

(i) to delegate his/her powers to other members of the Agency's staff subject to rules to be adopted in accordance with the procedure referred to in Article 65(2);

(j) with the consent of the Management Board, to take decisions regarding the establishment of local offices in the Member States in accordance with Article 28(3);

(k) to prepare and to implement the annual programme of work;

(l) to respond to requests for assistance from the Commission.

(a) draw on expertise available in the aviation regulatory authorities of Member States;

(b) whenever necessary, involve appropriate experts from relevant interested parties;

(c) ensure that the Agency publishes documents and consults widely with interested parties, according to a timetable and a procedure which includes an obligation on the Agency to make a written response to the consultation process.

(a) ensure the hearing of the natural or legal person to be addressed in the decision and of any other party with a direct and individual concern;

(b) provide for notification of the decision to natural or legal persons and for its publication;

(c) provide for the natural or legal person to whom the decision is addressed, and any other parties to proceedings, to be informed of the legal remedies available to that person under this Regulation;

(d) ensure that the decision contains reasons.

(a) to examine the relevant records, data, procedures and any other material relevant to the achievement of aviation safety levels in accordance with this Regulation;

(b) to take copies of or extracts from such records, data, procedures and other material;

(c) to ask for an oral explanation on the spot;

(d) to enter any relevant premises, land or means of transport.

(a) to examine the relevant records, data, procedures and any other material relevant to the execution of the tasks of the Agency;

(b) to take copies of or extracts from such records, data, procedures and other material;

(c) to ask for an oral explanation on site;

(d) to enter relevant premises, lands or means of transport of undertakings;

(e) to conduct inspections of aircraft in cooperation with Member States.

(a) a contribution from the Community;

(b) a contribution from any European third country with which the Community has concluded agreements as referred to in Article 66;

(c) the fees paid by applicants for, and holders of, certificates and approvals issued by the Agency;

(d) charges for publications, training and any other services provided by the Agency; and

(e) any voluntary financial contribution from Member States, third countries or other entities, provided such a contribution does not compromise the independence and impartiality of the Agency.

(a) the issuing and renewal of certificates, as well as the related continuing oversight functions;

(b) the provision of services; they shall reflect the actual cost of each individual provision;

(c) the processing of appeals.

1.a. Structures and materials: the integrity of the structure must be ensured throughout, and sufficiently beyond, the operational envelope for the aircraft, including its propulsion system, and maintained for the operational life of the aircraft.

1.a.1. All parts of the aircraft, the failure of which could reduce the structural integrity, must comply with the following conditions without detrimental deformation or failure. This includes all items of significant mass and their means of restraint.

1.a.1.a. All combinations of load reasonably expected to occur within, and sufficiently beyond, the weights, centre of gravity range, operational envelope and life of the aircraft must be considered. This includes loads due to gusts, manoeuvres, pressurisation, movable surfaces, control and propulsion systems both in flight and on the ground.

1.a.1.b. Consideration must be given to the loads and likely failures induced by emergency landings either on land or water.

1.a.1.c. Dynamic effects must be covered in the structural response to these loads.

1.a.2. The aircraft must be free from any aeroelastic instability and excessive vibration.

1.a.3. The manufacturing processes and materials used in the construction of the aircraft must result in known and reproducible structural properties. Any changes in material performance related to the operational environment must be accounted for.

1.a.4. The effects of cyclic loading, environmental degradation, accidental and discrete source damage must not reduce the structural integrity below an acceptable residual strength level. All necessary instructions for ensuring continued airworthiness in this regard must be promulgated.

1.b. Propulsion: the integrity of the propulsion system (i.e. engine and, where appropriate, propeller) must be demonstrated throughout, and sufficiently beyond, the operational envelope of the propulsion system and must be maintained for the operational life of the propulsion system.

1.b.1. The propulsion system must produce, within its stated limits, the thrust or power demanded of it at all required flight conditions, taking into account environmental effects and conditions.

1.b.2. The fabrication process and materials used in the construction of the propulsion system must result in known and reproducible structural behaviour. Any changes in material performance related to the operational environment must be accounted for.

1.b.3. The effects of cyclic loading, environmental and operational degradation and likely subsequent part failures must not reduce the integrity of the propulsion system below acceptable levels. All necessary instructions for ensuring continued airworthiness in this regard must be promulgated.

1.b.4. All necessary instructions, information and requirements for the safe and correct interface between the propulsion system and the aircraft must be promulgated.

1.c. Systems and equipment

1.c.1. The aircraft must not have design features or details that experience has shown to be hazardous.

1.c.2. The aircraft, including those systems, equipment and appliances required for type-certification, or by operating rules, must function as intended under any foreseeable operating conditions, throughout, and sufficiently beyond, the operational envelope of the aircraft, taking due account of the system, equipment or appliance operating environment. Other systems, equipment and appliance not required for type-certification, or by operating rules, whether functioning properly or improperly, must not reduce safety and must not adversely affect the proper functioning of any other system, equipment or appliance. Systems, equipment and appliances must be operable without needing exceptional skill or strength.

1.c.3. The aircraft systems, equipment and associated appliances, considered separately and in relation to each other, must be designed such that any catastrophic failure condition does not result from a single failure not shown to be extremely improbable and an inverse relationship must exist between the probability of a failure condition and the severity of its effect on the aircraft and its occupants. With respect to the single failure criterion above, it is accepted that due allowance must be made for the size and broad configuration of the aircraft and that this may prevent this single failure criterion from being met for some parts and some systems on helicopters and small aeroplanes.

1.c.4. Information needed for the safe conduct of the flight and information concerning unsafe conditions must be provided to the crew, or maintenance personnel, as appropriate, in a clear, consistent and unambiguous manner. Systems, equipment and controls, including signs and announcements must be designed and located to minimise errors which could contribute to the creation of hazards.

1.c.5. Design precautions must be taken to minimise the hazards to the aircraft and occupants from reasonably probable threats, both inside and external to the aircraft, including protecting against the possibility of a significant failure in, or disruption of, any aircraft appliance.

1.d. Continuing airworthiness

1.d.1. Instructions for continuing airworthiness must be established to ensure that the aircraft type certification airworthiness standard is maintained throughout the operational life of the aircraft.

1.d.2. Means must be provided to allow inspection, adjustment, lubrication, removal or replacement of parts and appliances as necessary for continuing airworthiness.

1.d.3. The instructions for continuing airworthiness must be in the form of a manual, or manuals, as appropriate for the quantity of data to be provided. The manuals must cover maintenance and repair instructions, servicing information, trouble-shooting and inspection procedures, in a format that provides for a practical arrangement.

1.d.4. The instructions for continuing airworthiness must contain airworthiness limitations that set forth each mandatory replacement time, inspection interval and related inspection procedure.

2.a. The following must be shown to have been addressed to ensure a satisfactory level of safety for those onboard or on the ground during the operation of the product:

2.a.1. The kinds of operation for which the aircraft is approved must be established and limitations and information necessary for safe operation, including environmental limitations and performance, must be established.

2.a.2. The aircraft must be safely controllable and manoeuvrable under all anticipated operating conditions including following the failure of one or, if appropriate, more propulsion systems. Due account must be taken of pilot strength, flight deck environment, pilot workload and other human-factor considerations and of the phase of flight and its duration.

2.a.3. It must be possible to make a smooth transition from one flight phase to another without requiring exceptional piloting skill, alertness, strength or workload under any probable operating condition.

2.a.4. The aircraft must have such stability as to ensure that the demands made on the pilot are not excessive taking into account the phase of flight and its duration.

2.a.5. Procedures for normal operations, failure and emergency conditions must be established.

2.a.6. Warnings, or other deterrents intended to prevent exceedance of the normal flight envelope, must be provided, as appropriate to type.

2.a.7. The characteristics of the aircraft and its systems must allow a safe return from extremes of the flight envelope that may be encountered.

2.b. The operating limitations and other information necessary for safe operation must be made available to the crew members.

2.c. Product operations must be protected from hazards resulting from adverse external and internal conditions, including environmental conditions.

2.c.1. In particular, no unsafe condition must occur from exposure to phenomena such as, but not limited to, adverse weather, lightning, bird strike, high frequency radiated fields, ozone, etc., reasonably expected to occur during product operation.

2.c.2. Cabin compartments must provide passengers with suitable transport conditions and adequate protection from any expected hazard arising in flight operations or resulting in emergency situations, including fire, smoke, toxic gases and rapid decompression hazards. Provisions must be made to give occupants every reasonable chance of avoiding serious injury and quickly evacuating the aircraft and to protect them from the effect of the deceleration forces in the event of an emergency landing on land or water. Clear and unambiguous signs or announcements must be provided, as necessary, to instruct occupants in appropriate safe behaviour and the location and correct use of safety equipment. Required safety equipment must be readily accessible.

2.c.3. Crew compartments must be arranged in order to facilitate flight operations, including means providing situational awareness, and management of any expected situation and emergencies. The environment of crew compartments must not jeopardise the crew's ability to perform their tasks and its design must be such as to avoid interference during operation and misuse of the controls.

3.a. Organisation approvals must be issued when the following conditions are met:

3.a.1. the organisation must have all the means necessary for the scope of work. These means comprise, but are not limited to, the following: facilities, personnel, equipment, tools and material, documentation of tasks, responsibilities and procedures, access to relevant data and record-keeping;

3.a.2. the organisation must implement and maintain a management system to ensure compliance with these essential requirements for airworthiness, and aim for continuous improvement of this system;

3.a.3. the organisation must establish arrangements with other relevant organisations, as necessary, to ensure continuing compliance with these essential requirements for airworthiness;

3.a.4. the organisation must establish an occurrence reporting and/or handling system, which must be used by the management system under point 3.a.2 and the arrangements under point 3.a.3, in order to contribute to the aim of continuous improvement of the safety of products.

3.b. In the case of maintenance training organisations, the conditions under points 3.a.3 and 3.a.4 do not apply.

(a) historic aircraft meeting the criteria below:

(b) aircraft specifically designed or modified for research, experimental or scientific purposes, and likely to be produced in very limited numbers;

(c) aircraft of which at least 51 % is built by an amateur, or a non-profit making association of amateurs, for their own purposes and without any commercial objective;

(d) aircraft that have been in the service of military forces, unless the aircraft is of a type for which a design standard has been adopted by the Agency;

(e) aeroplanes, helicopters and powered parachutes having no more than two seats, a maximum take-off mass (MTOM), as recorded by the Member States, of no more than:

and, for aeroplanes, having the stall speed or the minimum steady flight speed in landing configuration not exceeding 35 knots calibrated air speed (CAS);

(f) single and two-seater gyroplanes with a maximum take off mass not exceeding 560 kg;

(g) gliders with a maximum empty mass, of no more than 80 kg when single-seater or 100 kg when two-seater, including those which are foot launched;

(h) replicas of aircraft meeting the criteria of (a) or (d) above, for which the structural design is similar to the original aircraft;

(i) unmanned aircraft with an operating mass of no more than 150 kg;

(j) any other aircraft which has a maximum empty mass, including fuel, of no more than 70 kg.

1.a.1. A person undertaking training to fly an aircraft must be sufficiently mature educationally, physically and mentally to acquire, retain and demonstrate the relevant theoretical knowledge and practical skill.

1.b.1. A pilot must acquire and maintain a level of knowledge appropriate to the functions exercised on the aircraft and proportionate to the risks associated to the type of activity. Such knowledge must include at least the following:

1.c.1. The acquisition and retention of theoretical knowledge must be demonstrated by continuous assessment during training, and where appropriate, by examinations.

1.c.2. An appropriate level of competence in theoretical knowledge must be maintained. Compliance must be demonstrated by regular assessments, examinations, tests or checks. The frequency of examinations, tests or checks must be proportionate to the level of risk associated with the activity.

1.d.1. A pilot must acquire and maintain the practical skills as appropriate to exercise his/her functions on the aircraft. Such skills must be proportionate to the risks associated to the type of activity and must cover, if appropriate to the functions exercised on the aircraft, the following:

1.e.1. A pilot must demonstrate the ability to perform the procedures and manoeuvres with a degree of competence appropriate to the functions exercised on the aircraft, by:

1.e.2. An appropriate level of competence in practical skill must be maintained. Compliance must be demonstrated by regular assessments, examinations, tests or checks. The frequency of examinations, tests or checks must be proportionate to the level of risk associated with the activity.

(i) the ability to understand weather information documents;

(ii) the use of aeronautical en-route, departure and approach charts and associated aeronautical information documents; and

(iii) the ability to communicate with other flight crew and air navigation services during all phases of flight, including flight preparation.

1.h.1. Training must be executed through a training course.

1.h.2. A training course must meet the following conditions:

1.i.1. Theoretical instruction

Theoretical instruction must be given by appropriately qualified instructors. They must:

1.i.2. Flight and flight simulation instruction

Flight and flight simulation instruction must be given by appropriately qualified instructors, who have the following qualifications:

Flight instructors must also be entitled to act as pilot in command on the aircraft for which instruction is being given, except for training on new aircraft types.

1.j.1. Persons responsible for assessing the skill of pilots must:

2.a.1. A person acting as flight crew member, instructor or examiner must acquire and maintain sufficient experience for the functions being exercised, unless the implementing rules provide for competence to be demonstrated in accordance with point 1.e.

3.a.1. A training organisation providing pilot training must meet the following requirements:

4.a.1. All pilots must periodically demonstrate medical fitness to satisfactorily execute their functions, taking into account the type of activity. Compliance must be shown by appropriate assessment based on aero-medical best practice, taking into account the type of activity and the possible mental and physical degradation due to age.

Medical fitness, comprising physical and mental fitness, means not suffering from any disease or disability, which makes the pilot unable:

4.a.2. Where medical fitness cannot be fully demonstrated, mitigation measures that provide equivalent flight safety may be implemented.

4.b.1. An aero-medical examiner must:

4.c.1. Aero-medical centres must meet the following conditions:

1.a. A flight must not be performed if the crew members and, as appropriate, all other operations personnel involved in its preparation and execution are not familiar with applicable laws, regulations and procedures, pertinent to the performance of their duties, prescribed for the areas to be traversed, the aerodromes planned to be used and the air navigation facilities relating thereto.

1.b. A flight must be performed in such a way that the operating procedures specified in the Flight Manual or, where required the Operations Manual, for the preparation and execution of the flight are followed. To facilitate this, a checklist system must be available for use, as applicable, by crew members in all phases of operation of the aircraft under normal, abnormal and emergency conditions and situations. Procedures must be established for any reasonably foreseeable emergency situation.

1.c. Before every flight, the roles and duties of each crew member must be defined. The pilot in command must be responsible for the operation and safety of the aircraft and for the safety of all crew members, passengers and cargo on board.

1.d. Articles or substances, which are capable of posing a significant risk to health, safety, property or the environment, such as dangerous goods, weapons and ammunition, must not be carried on any aircraft, unless specific safety procedures and instructions are applied to mitigate the related risks.

1.e. All necessary data, documents, records and information to record the respect of the conditions specified in point 5.c must be retained for each flight and kept available for a minimum period of time compatible with the type of operation.

2.a. A flight must not be commenced unless it has been ascertained by every reasonable means available that all the following conditions are complied with:

2.a.1. Adequate facilities directly required for the flight and for the safe operation of the aircraft, including communication facilities and navigation aids, are available for the execution of the flight, taking into account available Aeronautical Information Services documentation.

2.a.2. The crew must be familiar with and passengers informed of the location and use of relevant emergency equipment. Sufficient related information regarding emergency procedures and use of cabin safety equipment must be made available to crew and passengers using specified information.

2.a.3. The pilot in command must be satisfied that:

2.a.4. Information regarding meteorological conditions for departure, destination and, where applicable, alternate aerodromes, as well as en-route conditions, must be available to the flight crew. Special attention must be given to potentially hazardous atmospheric conditions.

2.a.5. In case of flight into known or expected icing conditions, the aircraft must be certified, equipped and/or treated to operate safely in such conditions.

2.a.6. For a flight based on visual flight rules, meteorological conditions along the route to be flown must be such as to render compliance with these flight rules possible. For a flight based on instrument flight rules a destination and where applicable alternate aerodrome(s) where the aircraft can land must be selected, taking into account in particular the forecasted meteorological conditions, the availability of air navigation services, the availability of ground facilities and the instrument flight procedures approved by the State in which the destination and/or alternate aerodrome is located.

2.a.7. The amount of fuel and oil on board must be sufficient to ensure that the intended flight can be completed safely, taking into account the meteorological conditions, any element affecting the performance of the aircraft and any delays that are expected in flight. In addition, a fuel reserve must be carried to provide for contingencies. Procedures for in-flight fuel management must be established when relevant.

3.a. With regard to flight operations, all the following conditions must be complied with:

3.a.1. where relevant for the type of aircraft, during take-off and landing, and whenever deemed necessary by the pilot in command in the interest of safety, each crew member must be seated at their crew station and must use the provided restraint systems, taking into account the type of aircraft;

3.a.2. where relevant for the type of aircraft, all flight crew members required to be on flight deck duty must be and remain at their station, with their seatbelts fastened except en-route for physiological or operational needs;

3.a.3. where relevant for the type of aircraft and the type of operation, before take-off and landing, during taxiing and whenever deemed necessary in the interest of safety, the pilot in command must ensure that each passenger is properly seated and secured;

3.a.4. a flight must be performed in such a way that appropriate separation from other aircraft is maintained and that adequate obstacle clearance is ensured, during all phases of the flight. Such separation must at least be those required by the applicable rules of the air;

3.a.5. a flight must not be continued unless known conditions continue to be at least equivalent to those in point 2. Furthermore, for a flight based on instrument flight rules, an approach toward an aerodrome must not be continued below certain specified heights or beyond a certain position, if prescribed visibility criteria are not met;

3.a.6. in an emergency, the pilot in command must ensure that all passengers are instructed in such emergency action as may be appropriate to the circumstances;

3.a.7. a pilot in command must take all necessary measures so as to minimise the consequences on the flight of disruptive passenger behaviour;

3.a.8. an aircraft must not be taxied on the movement area of an aerodrome, or its rotor must not be turned under power, unless the person at the controls is appropriately competent;

3.a.9. the applicable in-flight fuel management procedures must be used, when relevant.

4.a. An aircraft must be operated in accordance with its airworthiness documentation and all related operating procedures and limitations as expressed in its approved flight manual or equivalent documentation, as the case may be. The flight manual or equivalent documentation must be available to the crew and kept up to date for each aircraft.

4.b. The aircraft must be operated in accordance with the applicable environmental documentation.

4.c. A flight must not be commenced or continued unless the aircraft's scheduled performance, considering all factors which significantly affect its performance level, allows all phases of flight to be executed within the applicable distances/areas and obstacle clearances at the planned operating mass. Performance factors which significantly affect take-off, en-route and approach/landing are, particularly:

4.c.1. Such factors must be taken into account directly as operational parameters or indirectly by means of allowances or margins, which may be provided in the scheduling of performance data, as appropriate to the type of operation.

5.a. An aircraft must be equipped with all navigation, communication and other equipment necessary for the intended flight, taking account of air traffic regulations and rules of the air applicable during any phase of the flight.

5.b. When relevant, an aircraft must be equipped with all necessary safety, medical, evacuation and survival equipment, taking account of the risks associated to the areas of operation, the routes to be flown, the flight altitude and the duration of the flight.

5.c. All data necessary for the execution of the flight by the crew must be updated and available on board the aircraft taking account of applicable air traffic regulations, rules of the air, flight altitudes and areas of operation.

6.a. The aircraft must not be operated unless:

6.b. Before each flight or consistent series of consecutive flights, the aircraft must be inspected, through a pre-flight check, to determine whether it is fit for the intended flight.

6.c. The maintenance programme must contain in particular, maintenance tasks and intervals, especially those that have been specified as mandatory in the instructions for continuing airworthiness.

6.d. The aircraft must not be operated unless it is released to service by qualified persons or organisations, after maintenance. The signed release to service must contain in particular, the basic details of the maintenance carried out.

6.e. All records demonstrating the airworthiness of the aircraft must be kept until the information contained has been superseded by new information equivalent in scope and detail but not less than 24 months in the case of detailed maintenance records. When the aircraft is leased, all records demonstrating the airworthiness of the aircraft must be kept at least for the length of the lease.

6.f. All modifications and repairs must comply with the essential requirements for airworthiness. The substantiating data supporting compliance with the airworthiness requirements must be retained.

7.a. The number and composition of the crew must be determined taking into account:

7.b. Cabin crew members must:

7.c. The pilot in command must have the authority to give all commands and take any appropriate actions for the purpose of securing the operation and the safety of the aircraft and of persons and/or property carried therein.

7.d. In an emergency situation, which endangers the operation or the safety of the aircraft and/or persons on board, the pilot in command must take any action he/she considers necessary in the interest of safety. When such action involves a violation of local regulations or procedures, the pilot in command must be responsible for notifying the appropriate local authority without delay.

7.e. Emergency abnormal situations must not be simulated when passengers or cargo are being carried.

7.f. No crew member must allow their task achievement/decision making to deteriorate to the extent that flight safety is endangered because of the effects of fatigue, taking into account, inter alia, fatigue accumulation, sleep deprivation, number of sectors flown, night duties or time zone changes. Rest periods must provide sufficient time to enable crew members to overcome the effects of the previous duties and to be well rested by the start of the following flight duty period.

7.g. A crew member must not perform allocated duties on board an aircraft when under the influence of psychoactive substances or alcohol or when unfit due to injury, fatigue, medication, sickness or other similar causes.

8.a. The operation for commercial purposes and the operation of complex motor-powered aircraft must not be undertaken unless the following conditions are met:

8.a.1. the operator must have directly or indirectly through contracts the means necessary for the scale and scope of the operations. These means comprise but are not limited to the following: aircraft, facilities, management structure, personnel, equipment, documentation of tasks, responsibilities and procedures, access to relevant data and record keeping;

8.a.2. the operator must use only suitably qualified and trained personnel and implement and maintain training and checking programmes for the crew members and other relevant personnel;

8.a.3. the operator must establish a MEL or equivalent document, taking account of the following:

8.a.4. the operator must implement and maintain a management system to ensure compliance with these essential requirements for operations and aim for continuous improvement of this system; and

8.a.5. the operator must establish and maintain an accident prevention and safety programme, including an occurrence reporting programme, which must be used by the management system in order to contribute to the aim of continuous improvement of the safety of operations.

8.b. The operation for commercial purposes and the operation of complex motor-powered aircraft must only be undertaken in accordance with an operator's operations manual. Such manual must contain all necessary instructions, information and procedures for all aircraft operated and for operations personnel to perform their duties. Limitations applicable to flight time, flight duty periods and rest periods for crew members must be specified. The operations manual and its revisions must be compliant with the approved flight manual and be amended as necessary.

8.c. The operator must establish procedures, as appropriate, so as to minimise the consequences to safe flight operations of disruptive passenger behaviour.

8.d. The operator must develop and maintain security programmes adapted to the aircraft and the type of operation including particularly:

When security measures may adversely affect the safety of operations, the risks must be assessed and appropriate procedures developed to mitigate safety risks, this may necessitate the use of specialist equipment.

8.e. The operator must designate one pilot amongst the flight crew as the pilot in command.

8.f. The prevention of fatigue must be managed through a rostering system. For a flight, or series of flights, such a rostering system needs to address flight time, flight-duty periods, duty and adapted rest periods. Limitations established within the rostering system must take into account all relevant factors contributing to fatigue such as, in particular, number of sectors flown, time-zone crossing, sleep deprivation, disruption of circadian cycles, night hours, positioning, cumulative duty time for given periods of time, sharing of allocated tasks between crew members, and also the provision of augmented crews.

8.g. The tasks specified in point 6.a and those described in points 6.d and 6.e must be controlled by an organisation responsible for the continuing airworthiness management that must meet, in addition to those requirements of Annex I point 3.a, the following conditions:

1. The entity, its Director and the staff responsible for carrying out the checks, may not become involved, either directly or as authorised representatives, in the design, manufacture, marketing or maintenance of the products, parts, appliances, constituents or systems or in their operations, service provision or use. This does not exclude the possibility of an exchange of technical information between the involved organisations and the qualified entity.

2. The entity and the staff responsible for the certification tasks must carry out their duties with the greatest possible professional integrity and the greatest possible technical competence and must be free of any pressure and incentive, in particular of a financial type, which could affect their judgment or the results of their investigations, in particular from persons or groups of persons affected by the results of the certification tasks.

3. The entity must employ staff and possess the means required to perform adequately the technical and administrative tasks linked with the certification process; it should also have access to the equipment needed for exceptional checks.

4. The staff responsible for investigation must have:

5. The impartiality of the investigation staff must be guaranteed. Their remuneration must not depend on the number of investigations carried out or on the results of such investigations.

6. The entity must take out liability insurance unless its liability is assumed by one Member State in accordance with its national law.

7. The staff of the entity must observe professional secrecy with regard to all information acquired in carrying out their tasks under this Regulation.

(a) Aerodromes shall have a designated area for the landing and take-off of aircraft, which satisfies the following conditions:

(b) Where there are several designated landing and take-off areas, they shall be such that they do not create an unacceptable risk to aircraft operations.

(c) The designated landing and take-off area shall be surrounded by defined areas. These areas are intended to protect aircraft flying over them during take-off or landing operations or to mitigate the consequences of undershooting, running off the side or overrunning the take-off and landing area, and shall satisfy the following conditions:

(d) Those areas of an aerodrome, with their associated immediate surroundings, that are to be used for taxiing or parking aircraft, shall be designed to permit safe operation of the aircraft expected to use the particular facility under all the conditions planned for, and shall satisfy the following conditions:

(e) Other infrastructure intended for use by aircraft shall be so designed that use of that infrastructure does not create an unacceptable risk to aircraft using it.

(f) Constructions, buildings, equipment or storage areas shall be located and designed so as not to create an unacceptable risk for aircraft operations.

(g) Suitable means shall be provided to prevent unauthorised persons, unauthorised vehicles or animals large enough to create an unacceptable risk to aircraft operations from entering the movement area, without prejudice to national and international animal protection provisions.

(a) To protect aircraft proceeding to an aerodrome for landing, or for their departure from an aerodrome, arrival and departure routes or areas shall be established. Such routes or areas shall provide aircraft with the required clearance from obstacles located in the area surrounding the aerodrome taking due account of the local physical characteristics.

(b) Such obstacle clearance shall be appropriate to the phase of flight and type of operation being conducted. It shall also take into account the equipment being used for determining the position of the aircraft.

(a) AIDS shall be fit for purpose, recognisable and provide unambiguous information to users under all intended operational conditions.

(b) Aerodrome equipment shall function as intended under the foreseen operating conditions. Under operating conditions or in case of failure, aerodrome equipment shall not cause an unacceptable risk to aviation safety.

(c) The aids and their electrical power supply system shall be so designed that failures do not result in inappropriate, misleading or insufficient information being given to users or in interruption of an essential service.

(d) Suitable means of protection shall be provided to avoid damage or disturbance to such aids.

(e) Sources of radiation or the presence of moving or fixed objects shall not interfere with or adversely affect the performance of aeronautical communications, navigation and surveillance systems.

(f) Information on operation and use of aerodrome equipment shall be made available to relevant staff, including clear indications of the conditions which may create unacceptable risks to aviation safety.

(a) Data relevant to the aerodrome and the available services shall be established and kept up to date.

(b) The data shall be accurate, readable, complete and unambiguous. Appropriate integrity levels shall be maintained.

(c) The data shall be made available to the users and the relevant ANS providers in a timely manner, using a sufficiently secure and expeditious method of communication.

(a) the aerodrome operator shall have, directly or under contracts, all the means necessary to ensure safe operation of aircraft at the aerodrome. These means shall include, but are not limited to, facilities, personnel, equipment and material, documentation of tasks, responsibilities and procedures, access to relevant data and record-keeping;

(b) the aerodrome operator shall verify that the requirements of Section A are complied with at all times or take appropriate measures to mitigate the risks associated with non-compliance. Procedures shall be established and applied to make all users aware of such measures in a timely manner;

(c) the aerodrome operator shall establish and implement an appropriate aerodrome wildlife risk management programme;

(d) the aerodrome operator shall ensure that movements of vehicles and persons in the movement area and other operational areas are coordinated with movements of aircraft in order to avoid collisions and damage to aircraft;

(e) the aerodrome operator shall ensure that procedures to mitigate risks related to aerodrome operations in winter operation, adverse weather conditions, reduced visibility or at night, if applicable, are established and implemented;

(f) the aerodrome operator shall establish arrangements with other relevant organisations to ensure continuing compliance with these essential requirements for aerodromes. These organisations include, but are not limited to, aircraft operators, air navigation service providers, ground handling service providers and other organisations whose activities or products may have an effect on aircraft safety;

(g) the aerodrome operator, either by itself or by means of contracts with third parties, shall ensure that procedures exist to provide aircraft with fuel which is uncontaminated and of the correct specification;

(h) manuals for maintenance of aerodrome equipment shall be available, applied in practice and cover maintenance and repair instructions, servicing information, troubleshooting and inspection procedures;

(i) the aerodrome operator shall establish and implement an aerodrome emergency plan, covering emergency scenarios that may occur at the aerodrome or in its surroundings. This plan shall be coordinated, as appropriate, with the local community emergency plan;

(j) the aerodrome operator shall ensure that adequate aerodrome rescue and firefighting services are provided. Such services shall respond to an incident or accident with due urgency and shall include at least equipment, extinguishing agents and a sufficient number of personnel;

(k) the aerodrome operator shall use only trained and qualified personnel for aerodrome operations and maintenance and shall implement and maintain training and check programmes to ensure the continuing competence of all relevant personnel;

(l) the aerodrome operator shall ensure that any person permitted unescorted access to the movement area or other operational areas is adequately trained and qualified for such access;

(m) the rescue and firefighting personnel shall be properly trained and qualified to operate in the aerodrome environment. The aerodrome operator shall implement and maintain training and check programmes to ensure the continuing competence of this personnel; and

(n) all rescue and firefighting personnel potentially required to act in aviation emergencies shall periodically demonstrate their medical fitness to execute their functions satisfactorily, taking into account the type of activity. In this context, medical fitness, comprising both physical and mental fitness, means not suffering from any disease or disability which could make this personnel unable:

(a) The aerodrome operator shall implement and maintain a management system to ensure compliance with these essential requirements for aerodromes and to aim for continuous and proactive improvement of safety. The management system shall include organisational structures, accountability, responsibilities, policies and procedures.

(b) The management system shall include an accident and incident prevention programme, including an occurrence-reporting and analysis scheme. The analysis shall involve the parties listed in point 1(f) above, as appropriate.

(c) The aerodrome operator shall develop an aerodrome manual and operate in accordance with that manual. Such manuals shall contain all necessary instructions, information and procedures for the aerodrome, the management system and for operations personnel to perform their duties.

1. The airspace around aerodrome movement areas shall be safeguarded from obstacles so as to permit the intended aircraft operations at the aerodromes without creating an unacceptable risk caused by the development of obstacles around the aerodrome. Obstacle monitoring surfaces shall therefore be developed, implemented and continuously monitored to identify any infringing penetration.

2. Hazards related to human activities and land use, such as, but not limited to, items on the following list, shall be monitored. The risk caused by them shall be assessed and mitigated as appropriate:

3. A local community emergency plan shall be established for aviation emergency situations occurring in the aerodrome local area.

(a) All aircraft, excluding those engaged in the activities referred to in Article 1(2)(a), in all phases of flight or on the movement area of an aerodrome, shall be operated in accordance with common general operating rules and any applicable procedure specified for use of that airspace.

(b) All aircraft, excluding those engaged in the activities referred to in Article 1(2)(a), shall be equipped with the required constituents and operated accordingly. Constituents used in the ATM/ANS system shall also comply with the requirements in point 3.

(i) The data used as a source for aeronautical information shall be of sufficient quality, complete, current and provided in a timely manner.

(ii) Aeronautical information shall be accurate, complete, current, unambiguous and be of adequate integrity in a suitable format for users.

(iii) The dissemination of such aeronautical information to airspace users shall be timely and use sufficiently reliable and expeditious means of communication protected from interference and corruption.

(i) The data used as a source for aeronautical meteorological information shall be of sufficient quality, complete and current.

(ii) To the extent possible, aeronautical meteorological information shall be precise, complete, current, be of adequate integrity and unambiguous in order to meet the needs of airspace users.

(iii) The dissemination of such aeronautical meteorological information to airspace users shall be timely and use sufficiently reliable and expeditious means of communication protected from interference and corruption.

(i) The data used as a source for the provision of air traffic services shall be correct, complete and current.

(ii) Air traffic services shall be sufficiently precise, complete, current, and unambiguous to meet the safety needs of users.

(iii) Automated tools providing information or advice to users shall be properly designed, manufactured and maintained to ensure that they are fit for their intended purpose.

(iv) Air traffic control services and related processes shall provide for adequate separation between aircraft and, where appropriate, assist in protection from obstacles and other airborne hazards and shall ensure prompt and timely coordination with all relevant users and adjacent volumes of airspace.

(v) Communication between air traffic services and aircraft and between relevant air traffic services units shall be timely, clear, correct and unambiguous, protected from interference and commonly understood and, if applicable, acknowledged by all actors involved.

(vi) Means shall be in place to detect possible emergencies and, when appropriate, to initiate effective search and rescue action. Such means shall, as a minimum, comprise appropriate alerting mechanisms, coordination measures and procedures, means and personnel to cover the area of responsibility efficiently.

(i) Systems and constituents shall be designed to meet applicable safety requirements.

(ii) Systems and constituents, considered collectively, separately and in relation to each other, shall be designed in such a way that an inverse relationship exists between the probability that any failure can result in a total system failure and the severity of its effect on the safety of services.

(iii) Systems and constituents, considered individually and in combination with each other, shall be designed taking into account limitations related to human capabilities and performance.

(iv) Systems and constituents shall be designed in a manner that protects them from unintended harmful interactions with external elements.

(v) Information needed for manufacturing installation, operation and maintenance of the systems and constituents as well as information concerning unsafe conditions shall be provided to personnel in a clear, consistent and unambiguous manner.

(i) An air traffic controller shall acquire and maintain a level of knowledge appropriate to the functions exercised and proportionate to the risks associated with the type of service.

(ii) Acquisition and retention of theoretical knowledge shall be demonstrated by continuous assessment during training, or by appropriate examinations.

(iii) An appropriate level of theoretical knowledge shall be maintained. Compliance shall be demonstrated by regular assessments or examinations. The frequency of examinations shall be proportionate to the level of risk associated with the type of service.

(i) An air traffic controller shall acquire and maintain the practical skills appropriate to exercise his/her functions. Such skills shall be proportionate to the risks associated with the type of service and shall cover at least, if appropriate to the functions exercised, the following items:

(ii) An air traffic controller shall demonstrate the ability to perform the associated procedures and tasks with a level of competence appropriate to the functions exercised.

(iii) A satisfactory level of competence in practical skill shall be maintained. Compliance shall be verified by regular assessments. The frequency of these assessments shall be proportionate to the complexity and the level of risk associated with the type of service and the tasks performed.

(i) An air traffic controller shall demonstrate proficiency to speak and understand English to the extent he/she is able to communicate effectively in voice-only (telephone/radiotelephone) and in face-to-face situations on concrete and work-related topics, including in emergency situations.

(ii) Whenever necessary in a defined volume of airspace for ATS service provision purposes, an air traffic controller shall also have proficiency to speak and understand the national language(s) to the extent described above.

(i) Training shall be given by a training course, which may comprise theoretical and practical instruction, including training on an STD, if applicable.

(ii) A course shall be defined and approved for each type of training.

(i) Theoretical instruction shall be given by appropriately qualified instructors. They shall:

(ii) Instruction on practical skills shall be given by appropriately qualified instructors, who have the following qualifications:

(iii) Instructors on practical skills shall also be or have been entitled to act as an air traffic controller.

(i) Persons responsible for assessing the skill of air traffic controllers shall:

(ii) Assessors on practical skills shall also be or have been entitled to act as an air traffic controller in those areas in which assessment is to be made.

i. All air traffic controllers shall periodically demonstrate medical fitness to satisfactorily execute their functions. Compliance shall be shown by appropriate assessment taking into account the possible mental and physical degradation due to age;

ii. Demonstration of medical fitness, comprising physical and mental fitness, shall include the demonstrated absence of any disease or disability, which makes the person providing an air traffic control (ATC) service unable:

(i) the service provider shall have directly or indirectly through contracts the means necessary for the scale and scope of the service. These means shall comprise but are not limited to the following: systems, facilities, including power supply, management structure, personnel, equipment and its maintenance, documentation of tasks, responsibilities and procedures, access to relevant data and record-keeping;

(ii) the service provider shall develop and keep up-to-date management and operations manuals relating to the provision of its services and operate in accordance with those manuals. Such manuals shall contain all necessary instructions, information and procedures for the operations, the management system and for operations personnel to perform their duties;

(iii) the service provider shall implement and maintain a risk-based management system to ensure compliance with the essential requirements in this Annex and aim for continuous proactive improvement of this system;

(iv) the service provider shall use only suitably qualified and trained personnel and implement and maintain training and checking programmes for the personnel;

(v) the service provider shall establish formal interfaces with all the other contributors to the service provision to ensure compliance with these essential requirements;

(vi) the service provider shall establish and implement a contingency plan covering emergency and abnormal situations that may occur in relation to its services;

(vii) the service provider shall establish and maintain an accident and incident prevention and safety programme including an occurrence reporting and analysis programme, which shall be used by the management system in order to contribute to the aim of continuous improvement of safety; and

(viii) the service provider shall make arrangements to verify that the safety performance requirements of any system and constituent they operate are met at any time.

(i) the prevention of fatigue of personnel providing an ATC service shall be managed through a rostering system. Such a rostering system needs to address duty periods, duty time and adapted rest periods. Limitations established within the rostering system shall take into account relevant factors contributing to fatigue such as, in particular, sleep deprivation, disruption of circadian cycles, night hours, cumulative duty time for given periods of time and also the sharing of allocated tasks between personnel;

(ii) the prevention of stress of personnel providing an ATC service shall be managed through education and prevention programmes;

(iii) the ATC service provider shall have in place procedures to verify that the cognitive judgement of personnel providing ATC services is not impaired or their medical fitness insufficient;

(iv) the ATC service provider shall take into account operational and technical constraints as well as human factor principles in its planning and operations.

(i) have all the means necessary for the scope of responsibilities associated with their activity. These means comprise, but are not limited to, the following: facilities, personnel, equipment, methodology, documentation of tasks, responsibilities and procedures, access to relevant data and record-keeping;

(ii) implement and maintain a management system relating to safety and the standard of training, and aim for continuous improvement of this system; and

(iii) establish arrangements with other relevant organisations, as necessary, to ensure continuing compliance with these essential requirements.