This document is an excerpt from the EUR-Lex website
Document 01996R1255-20080101
Council Regulation (EC) No 1255/96 of 27 June 1996 temporarily suspending the autonomous Common Customs Tariff duties on certain industrial, agricultural and fishery products
Consolidated text: Council Regulation (EC) No 1255/96 of 27 June 1996 temporarily suspending the autonomous Common Customs Tariff duties on certain industrial, agricultural and fishery products
Council Regulation (EC) No 1255/96 of 27 June 1996 temporarily suspending the autonomous Common Customs Tariff duties on certain industrial, agricultural and fishery products
1996R1255 — EN — 01.01.2008 — 023.001
This document is meant purely as a documentation tool and the institutions do not assume any liability for its contents
COUNCIL REGULATION (EC) No 1255/96 of 27 June 1996 temporarily suspending the autonomous Common Customs Tariff duties on certain ►M9 industrial, agricultural and fishery products ◄ (OJ L 158, 29.6.1996, p.1) |
Amended by:
|
|
Official Journal |
||
No |
page |
date |
||
L 341 |
1 |
30.12.1996 |
||
L 172 |
1 |
30.6.1997 |
||
L 355 |
1 |
30.12.1997 |
||
L 186 |
1 |
30.6.1998 |
||
L 352 |
1 |
29.12.1998 |
||
L 165 |
1 |
30.6.1999 |
||
L 8 |
1 |
12.1.2000 |
||
L 153 |
1 |
26.6.2000 |
||
L 331 |
1 |
27.12.2000 |
||
L 169 |
1 |
23.6.2001 |
||
L 340 |
1 |
21.12.2001 |
||
L 171 |
1 |
29.6.2002 |
||
L 350 |
1 |
27.12.2002 |
||
L 161 |
1 |
30.6.2003 |
||
L 341 |
1 |
30.12.2003 |
||
L 238 |
1 |
8.7.2004 |
||
L 396 |
13 |
31.12.2004 |
||
L 168 |
1 |
30.6.2005 |
||
L 56 |
1 |
25.2.2006 |
||
L 176 |
3 |
30.6.2006 |
||
L 395 |
1 |
30.12.2006 |
||
L 166 |
4 |
28.6.2007 |
||
L 349 |
7 |
31.12.2007 |
Corrected by:
COUNCIL REGULATION (EC) No 1255/96
of 27 June 1996
temporarily suspending the autonomous Common Customs Tariff duties on certain ►M9 industrial, agricultural and fishery products ◄
THE COUNCIL OF THE EUROPEAN UNION,
Having regard to the Treaty establishing the European Community, and in particular Article 28 thereof,
Having regard to the proposal from the Commission,
Whereas production in the Community of the products specified in this Regulation is currently inadequate or non-existent; whereas producers thus cannot meet the needs of user industries in the Community;
Whereas it is in the interest of the Community to suspend partially or totally the autonomous Common Customs Tariff duties for these products;
Whereas the decision to suspend such autonomous duties should be taken by the Community;
Whereas the Regulations temporarily suspending the autonomous Common Customs Tariff duties on certain ►M9 industrial, agricultural and fishery products ◄ have largely renewed previous measures; whereas, therefore, in the interests of rationalizing implementation of the measures concerned, it would seem appropriate not to limit the period of validity of this Regulation as its scope can be adapted and products added to or removed from the list through a Council Regulation, if necessary;
Whereas the amendments to the combined nomenclature and the Taric codes do not give rise to any substantive amendment; whereas, for reasons of simplification, provision should be made to empower the Commission, following receipt of the opinion of the Customs Code Committee, to make the necessary amendments and technical adaptations of the Annex to this Regulation, including the publication of a consolidated version,
HAS ADOPTED THIS REGULATION:
Article 1
The autonomous Common Customs Tariff duties for the products listed in the Annex hereto shall be suspended at the level indicated against each of them.
Article 2
The technical adaptations, including publication of a consolidated version, arising from amendments of the combined nomenclature and Taric codes shall be adopted by the Commission in accordance with the procedure laid down in Article 3.
Article 3
1. The Commission shall be assisted by the Customs Code Committee set up by Article 247 of Regulation (EEC) No 2913/92 ( 1 ).
2. The representative of the Commission shall submit to the Committee a draft of the measures to be taken. The Committee shall deliver its opinion on the draft within a time limit which the chairman may lay down according to the urgency of the matter. The opinion shall be delivered by the majority laid down in Article 148 (2) of the Treaty in the case of decisions which the Council is required to adopt on a proposal from the Commission. The votes of the representatives of the Member States within the Committee shall be weighted in the manner set out in that Article. The chairman shall not vote.
3. The Commission shall adopt measures which apply immediately.
However, if these measures are not in accordance with the opinion of the Committee, they shall be communicated by the Commission to the Council forthwith. In that event, the Commission shall defer application of the measures which it has decided for three months from the date of such communication.
The Council, acting by a qualified majority, may take a different decision within the period referred to in the previous indent.
Article 4
This Regulation shall enter into force on the day following its publication in the Official Journal of the European Communities.
It shall apply from 1 July 1996.
This Regulation shall be binding in its entirety and directly applicable in all Member States.
ANNEX
CN code |
TARIC |
Description |
Rate of autonomous duty |
Validity period |
ex030269 99 ex030379 98 |
10 10 |
0 % |
1.1.2008-31.12.2008 |
|
ex030269 99 |
20 |
Lump fish (Cyclopterus lumpus) with roe, fresh or chilled, for processing (1) |
0 % |
1.1.2008-31.12.2008 |
ex030269 99 ex030379 98 |
30 20 |
Red snapper (Lutjanus purpureus), fresh, chilled or frozen, for processing (1) (2) |
0 % |
1.1.2008-31.12.2008 |
ex030270 00 ex030270 00 ex030270 00 ex030270 00 ex030270 00 ex030380 90 ex030380 90 ex030380 90 |
11 31 41 83 89 10 14 19 |
Hard fish roes, fresh, chilled or frozen |
0 % |
1.1.2008-31.12.2008 |
ex030311 00 ex030311 00 ex030319 00 ex030319 00 |
12 18 12 18 |
Pacific salmon (Oncorhynchus spp.), frozen and headless, for the processing industry for manufacture into pastes or spreads (1) |
0 % |
1.1.2008-31.12.2008 |
(4)ex030419 39 ex030419 99 ex030429 61 ex030499 99 |
45 60 10 31 |
Fillets and meat of dogfish (Squalus acanthias), fresh, chilled or frozen |
6 % |
1.1.2008-31.12.2008 |
ex030520 00 ex030520 00 ex030520 00 ex030520 00 ex030520 00 |
11 18 19 21 30 |
Hard fish roes, salted or in brine |
0 % |
1.1.2008-31.12.2008 |
ex030619 90 ex030629 90 |
10 10 |
Krill for processing (1) |
0 % |
1.1.2008-31.12.2008 |
ex060390 00 ex060499 90 |
10 10 |
Flowers, flower buds, foliage, leaves and other parts of plants, not further prepared than dried, dyed or bleached, for use in the manufacture of pot pourri of subheading 3307 49 00 (1) |
0 % |
1.1.2008-31.12.2008 |
ex071021 00 |
10 |
Peas in pods, of the species Pisum sativum of the variety Hortense axiphium, frozen, of a thickness not exceeding 6 mm, to be used, in their pods, in the manufacture of prepared meals (1) (2) |
0 % |
1.1.2008-31.12.2008 |
ex071080 95 |
50 |
Bamboo shoots, frozen, not put up for retail sale |
0 % |
1.1.2008-31.12.2008 |
ex071159 00 |
11 |
Mushrooms, excluding mushrooms of the genera Agaricus, Calocybe, Clitocybe, Lepista, Leucoagaricus, Leucopaxillus, Lyophyllum and Tricholoma, provisionally preserved in brine, in sulphur water, or in other preservative solutions, but unsuitable in that state for immediate consumption, for the food-canning industry (1) |
0 % |
1.1.2008-31.12.2011 |
ex071232 00 ex071233 00 ex071239 00 |
10 10 31 |
Mushrooms, excluding mushrooms of the genus Agaricus, dried, whole or in identifiable slices or pieces, for treatment other than simple repacking for retail sale (1) (2) |
0 % |
1.1.2008-31.12.2008 |
ex080410 00 |
10 |
Dates, fresh or dried, not put up for retail sale |
0 % |
1.1.2008-31.12.2008 |
ex081040 50 |
10 |
Fruit of the species Vaccinium macrocarpon, fresh |
0 % |
1.1.2008-31.12.2008 |
ex081090 95 |
10 |
Rose-hips, fresh |
0 % |
1.1.2008-31.12.2008 |
0811 90 50 0811 90 70 ex081190 95 |
69 |
Fruit of the genus Vaccinium, uncooked or cooked by steaming or boiling in water, frozen, not containing added sugar or other sweetening matter |
0 % |
1.1.2008-31.12.2008 |
ex081190 95 |
20 |
Boysenberries, frozen, not containing added sugar, not put up for retail sale |
0 % |
1.1.2008-31.12.2008 |
ex081190 95 |
30 |
Pineapple (Ananas comosus), in pieces, frozen |
0 % |
1.1.2008-31.12.2008 |
ex081190 95 |
40 |
Rose-hips, uncooked or cooked by steaming or boiling in water, frozen, not containing added sugar or other sweetening matter |
0 % |
1.1.2008-31.12.2008 |
ex151190 19 ex151190 91 ex151311 10 ex151319 30 ex151321 10 ex151329 30 |
10 10 10 10 10 10 |
Palm oil, coconut (copra) oil, palm kernel oil, for the manufacture of: — industrial monocarboxylic fatty acids of subheading 3823 19 10, — mixtures of methyl esters of fatty acids of subheading 3824 90 91, — methyl esters of fatty acids of heading 2915 or 2916, — stearic acid of subheading 3823 11 00 or — goods of heading No 3401 (1) |
0 % |
1.1.2008-31.12.2008 |
ex151590 99 |
92 |
Vegetable oil, refined, containing by weight 35 % or more but not more than 50 % of arachidonic acid or 35 % or more but not more than 50 % of docosahexaenoic acid |
0 % |
1.1.2008-31.12.2008 |
ex151790 99 |
10 |
Vegetable oil, refined, containing by weight 35 % or more but not more than 50 % arachidonic acid or 35 % or more but not more than 50 % docosahexaenoic acid and standardized with high oleic sunflower oil (HOSO) |
0 % |
1.1.2008-31.12.2011 |
ex151800 91 |
10 |
Soya-bean oil, modified with maleic acid, for the manufacture of cosmetic products (1) |
0 % |
1.1.2008-31.12.2008 |
ex160411 00 ex160420 10 |
20 20 |
Pacific salmon (Oncorhynchus spp.), for the processing industry for manufacture into pastes or spreads (1) |
0 % |
1.1.2008-31.12.2008 |
ex160430 90 |
10 |
Hard fish roes, washed, cleaned of adherent organs and simply salted or in brine, for processing (1) |
0 % |
1.1.2008-31.12.2008 |
(4)ex160510 00 ex160510 00 |
11 19 |
Crabs of the species ‘King’ (Paralithodes camchaticus), ‘Hanasaki’ (Paralithodes brevipes), ‘Kegani’ (Erimacrus isenbecki), ‘Queen’ and ‘Snow’ (Chionoecetes spp.), ‘Red’ (Geryon quinquedens), ‘Rough stone’ (Neolithodes asperrimus), Lithodes santolla, ‘Mud’ (Scylla serrata), ‘Blue’ (Portunus spp.), simply boiled in water and shelled, whether or not frozen, in immediate packings of a net content of 2 kg or more |
0 % |
1.1.2008-31.12.2008 |
ex160510 00 ex160510 00 |
92 94 |
Crabs of the species Paralomis granulosa |
0 % |
1.1.2008-31.12.2008 |
ex190230 10 ex190300 00 |
10 20 |
Transparent noodles, cut in pieces, obtained from beans (Vigna radiata (L.) Wilczek), not put up for retail sale |
0 % |
1.1.2008-31.12.2008 |
ex200591 00 |
10 |
Bamboo shoots, prepared or preserved, in immediate packings of a net content exceeding 5 kg |
0 % |
1.1.2008-31.12.2008 |
ex200980 79 |
87 |
Frozen boysenberry juice concentrate with a Brix value of 61 or more, but not more than 65 |
0 % |
1.1.2008-31.12.2011 |
ex200980 99 |
93 |
Untreated frozen coconut water, not put up for retail sale |
0 % |
1.1.2008-31.12.2011 |
ex210610 20 |
10 |
Soya protein isolate, containing by weight 6,6 % or more but not more than 8,6 % of calcium phosphate |
0 % |
1.1.2008-31.12.2008 |
ex230990 99 |
20 |
Calcium sodium phosphate, with a fluorine content of 0,005 % or more but less than 0,2 % by weight on the dry anhydrous product, for use in the manufacture of additives for animal feeding (1) |
0 % |
1.1.2008-31.12.2008 |
ex270799 11 |
10 |
Crude light oils containing by weight: — 10 % or more of vinyltoluenes, — 10 % or more of indene and — 1 % or more but not more than 5 % of naphthalene |
0 % |
1.1.2008-31.12.2008 |
ex271011 25 |
10 |
Mixture of isomers 2,4,4-trimethylpent-1-ene and 2,4,4-trimethylpent-2-ene |
0 % |
1.1.2008-31.12.2008 |
ex280530 10 |
10 |
Alloy of cerium and other rare-earth metals, containing by weight 47 % or more of cerium |
0 % |
1.1.2008-31.12.2008 |
ex280530 10 |
20 |
Alloy of lanthanum and other rare-earth metals, containing by weight 43 % or more of lanthanum |
0 % |
1.1.2008-31.12.2008 |
ex280530 90 |
10 |
Lanthanum of a purity by weight of 99 % or more |
0 % |
1.1.2008-31.12.2008 |
ex281119 80 |
10 |
Sulfamidic acid |
0 % |
1.1.2008-31.12.2008 |
ex281122 00 |
10 |
Silicon dioxide in the form of powder, for use in the manufacture of high performance liquid chromatography columns (HPLC) and sample preparation cartridges (1) |
0 % |
1.1.2008-31.12.2008 |
ex281122 00 |
20 |
Microspheres of amorphous silicon of a particle size of 5 μm (±1 μm), for use in the manufacture of cosmetic products (1) |
0 % |
1.1.2008-31.12.2011 |
ex281122 00 |
30 |
Balls of porous white silica of a particle size of more than 1 μm for use in the manufacture of cosmetic products (1) |
0 % |
1.1.2008-31.12.2011 |
ex281129 90 |
10 |
Tellurium dioxide |
0 % |
1.1.2008-31.12.2008 |
ex281290 00 |
10 |
Nitrogen trifluoride |
0 % |
1.1.2008-31.12.2008 |
ex281290 00 |
20 |
Silicon tetrafluoride |
0 % |
1.1.2008-31.12.2008 |
ex281830 00 |
10 |
Aluminium hydroxide oxide in the form of pseudo-boehmite |
4 % |
1.1.2008-31.12.2008 |
2819 10 00 |
Chromium trioxide |
0 % |
1.1.2008-31.12.2011 |
|
ex281990 90 |
10 |
Dichromium trioxide: — of a specific surface of 37 m2/g or more (as determined by the BET method), — of a purity by weight of 99,5 % or more calculated on the dry substance, — of a specific gravity of 1,2 g/cm3 or less, for the manufacture of magnetic chromium dioxide (1) |
0 % |
1.1.2008-31.12.2008 |
ex282090 90 |
10 |
Manganese (II,III) oxide containing by weight 70 % or more of manganese |
0 % |
1.1.2008-31.12.2008 |
ex282110 00 |
10 |
Diiron trioxide, in the form of powder, of a purity by weight of 99,2 % or more, for the manufacture of goods of heading No 8504 (1) |
0 % |
1.1.2008-31.12.2008 |
ex282300 00 |
10 |
Titanium dioxide, of a purity by weight of 99,9 % or more, with an average grain-size of 1,2 μm or more but not exceeding 1,8 μm, for the manufacture of goods of heading No 8532 or 8533 (1) |
0 % |
1.1.2008-31.12.2008 |
ex282550 00 |
10 |
Copper (I or II) oxide containing by weight 78 % or more of copper and not more than 0,03 % of chloride |
0 % |
1.1.2008-31.12.2008 |
ex282690 80 |
10 |
Potassium hexafluorophosphate |
0 % |
1.1.2008-31.12.2008 |
ex282739 85 |
10 |
Copper monochloride of a purity by weight of 96 % or more but not exceeding 99 % |
0 % |
1.1.2008-31.12.2008 |
ex282739 85 |
20 |
Antimony pentachloride of a purity by weight of 99 % or more |
0 % |
1.1.2008-31.12.2011 |
ex282760 00 |
10 |
Titanium tetraiodide |
0 % |
1.1.2008-31.12.2008 |
ex283010 00 |
10 |
Disodium tetrasulfide, containing by weight 38 % or less of sodium calculated on the dry weight |
0 % |
1.1.2008-31.12.2008 |
ex283090 85 |
10 |
Zinc sulfide containing: — 20,0 mg/kg or less of chloride, — 0,2 mg/kg or less of copper, — 0,5 mg/kg or less of iron and — 1,0 mg/kg or less of lead |
0 % |
1.1.2008-31.12.2008 |
ex283329 90 |
10 |
Manganese sulphate monohydrate |
0 % |
1.1.2008-31.12.2008 |
ex283691 00 |
20 |
Lithium carbonate, containing one or more of the following impurities at the concentrations indicated: — 2 mg/kg or more of arsenic, — 200 mg/kg or more of calcium, — 200 mg/kg or more of chlorides, — 20 mg/kg or more of iron, — 150 mg/kg or more of magnesium, — 20 mg/kg or more of heavy metals, — 300 mg/kg or more of potassium, — 300 mg/kg or more of sodium, — 200 mg/kg or more of sulfates, determined according to the methods specified in the European Pharmacopœia |
0 % |
1.1.2008-31.12.2008 |
ex283699 17 |
10 |
Zirconium (IV) basic carbonate |
0 % |
1.1.2008-31.12.2008 |
ex283719 00 |
10 |
Zinc cyanide |
0 % |
1.1.2008-31.12.2008 |
ex283719 00 |
20 |
Copper cyanide |
0 % |
1.1.2008-31.12.2008 |
ex283720 00 |
10 |
Tetrasodium hexacyanoferrate (II) |
0 % |
1.1.2008-31.12.2011 |
ex283990 90 |
10 |
Lead silicate hydrate, of a lead content by weight of (84,5 ± 1,5) %, evaluated as lead monoxide, in the form of powder |
0 % |
1.1.2008-31.12.2008 |
ex283990 90 |
20 |
Calcium silicate |
0 % |
1.1.2008-31.12.2008 |
(4)ex284190 85 |
10 |
Lithium cobalt (III) oxide with a cobalt content of at least 59 % |
0 % |
1.1.2008-31.12.2012 |
ex284290 80 |
10 |
Ammonium sulfamidate |
0 % |
1.1.2008-31.12.2008 |
ex284329 00 |
10 |
Silver oxide, nitrate- and carbonate-free, with a silver content of at least 99,99 % by weight of the metal content, for the manufacture of silver oxide batteries (1) |
0 % |
1.1.2008-31.12.2011 |
ex284390 90 |
20 |
Palladium monoxide |
0 % |
1.1.2008-31.12.2008 |
ex284390 90 |
30 |
Mixture of palladium phthalocyanines |
0 % |
1.1.2008-31.12.2008 |
2845 10 00 |
Heavy water (deuterium oxide) (Euratom) |
0 % |
1.1.2008-31.12.2008 |
|
2845 90 10 |
Deuterium and compounds thereof; hydrogen and compounds thereof, enriched in deuterium; mixtures and solutions containing these products (Euratom) |
0 % |
1.1.2008-31.12.2008 |
|
ex284590 90 |
10 |
Helium-3 |
0 % |
1.1.2008-31.12.2011 |
ex284590 90 |
20 |
Water enriched at a level of 95 % or more with oxygen-18 |
0 % |
1.1.2008-31.12.2011 |
ex284590 90 |
30 |
Carbon monoxide 13C |
0 % |
1.1.2008-31.12.2011 |
(4)ex284610 00 ex382490 97 |
10 48 |
Rare-earth concentrate containing by weight 60 % or more but not more than 95 % of rare-earth oxides and not more than 1 % each of zirconium oxide, aluminium oxide or iron oxide, and having a loss on ignition of 5 % or more by weight |
0 % |
1.1.2008-31.12.2008 |
ex284610 00 |
20 |
Dicerium tricarbonate, whether or not hydrated |
0 % |
1.1.2008-31.12.2008 |
ex284610 00 |
30 |
Cerium lanthanum carbonate, whether or not hydrated |
0 % |
1.1.2008-31.12.2008 |
ex284610 00 |
40 |
Cerium lanthanum neodymium praseodymium carbonate, whether or not hydrated |
0 % |
1.1.2008-31.12.2008 |
2846 90 00 |
Compounds, inorganic or organic, of rare-earth metals, of yttrium or of scandium or of mixtures of these metals, other than those of subheading 2846 10 00 |
0 % |
1.1.2008-31.12.2008 |
|
ex284800 00 |
10 |
Phosphine |
0 % |
1.1.2008-31.12.2008 |
ex285000 20 |
10 |
Silane |
0 % |
1.1.2008-31.12.2008 |
ex285000 20 |
20 |
Arsine |
0 % |
1.1.2008-31.12.2008 |
ex290339 90 |
10 |
Carbon tetrafluoride (tetrafluoromethane) |
0 % |
1.1.2008-31.12.2008 |
ex290339 90 |
30 |
Perfluoroethane |
0 % |
1.1.2008-31.12.2008 |
ex290339 90 |
40 |
1,1-Difluoroethane |
0 % |
1.1.2008-31.12.2008 |
ex290339 90 |
50 |
1,1,1,3,3-Pentafluoropropane |
0 % |
1.1.2008-31.12.2008 |
ex290339 90 |
70 |
1,1,1,2 Tetrafluoroethane, certified odourless containing a maximum: — 600 ppm by weight of 1,1,2,2-Tetrafluorethane, — 2 ppm by weight of pentafluoroethane, — 2 ppm by weight of chlorodifluoromethane, — 2 ppm by weight of chloropentafluoroethane, — 2 ppm by weight of dichlorodifluoromethane For use in the manufacture of pharmaceutical grade propellant for medical metred dose inhalers (1) |
0 % |
1.1.2008-31.12.2011 |
ex290339 90 |
80 |
Hexafluoropropene |
0 % |
1.1.2008-31.12.2011 |
ex290343 00 |
10 |
1,1,1-Trichlorotrifluoroethane |
0 % |
1.1.2008-31.12.2008 |
(4)ex290349 19 |
10 |
Chloro-1,1,1-trifluoroethane |
0 % |
1.1.2008-31.12.2008 |
ex290349 80 |
20 |
1-Bromo-3-chloropropane |
0 % |
1.1.2008-31.12.2011 |
ex290359 80 |
10 |
1,6,7,8,9,14,15,16,17,17,18,18-Dodecachloropentacyclo [12.2.1.16,9,02,13,05,10]octadeca-7,15-diene |
0 % |
1.1.2008-31.12.2008 |
ex290359 80 |
20 |
Hexachlorocyclopentadiene |
0 % |
1.1.2008-31.12.2008 |
ex290359 80 |
30 |
Octafluorocyclopentene |
0 % |
1.1.2008-31.12.2011 |
ex290369 90 |
10 |
Di- or tetrachlorotricyclo[8.2.2.24,7]hexadeca-1(12),4,6,10,13,15-hexaene, mixed isomers |
0 % |
1.1.2008-31.12.2008 |
ex290369 90 |
20 |
1,2-Bis(pentabromophenyl)ethane |
0 % |
1.1.2008-31.12.2008 |
ex290369 90 |
40 |
2,6-Dichlorotoluene, of a purity by weight of 99 % or more and containing: — 0,001 mg/kg or less of tetrachlorodibenzodioxines, — 0,001 mg/kg or less of tetrachlorodibenzofurans, — 0,2 mg/kg or less of tetrachlorobiphenyls |
0 % |
1.1.2008-31.12.2008 |
ex290369 90 |
50 |
1-(Chloromethyl)naphthalene |
0 % |
1.1.2008-31.12.2008 |
ex290369 90 |
60 |
α-Chloro(ethyl)toluenes |
0 % |
1.1.2008-31.12.2008 |
ex290410 00 |
30 |
Sodium p-styrenesulfonate |
0 % |
1.1.2008-31.12.2008 |
(4)ex290410 00 |
40 |
Sodium toluene-4-sulphonate |
0 % |
1.1.2008-31.12.2012 |
ex290420 00 |
10 |
Nitromethane |
0 % |
1.1.2008-31.12.2008 |
ex290420 00 |
20 |
Nitroethane |
0 % |
1.1.2008-31.12.2008 |
ex290420 00 |
30 |
1-Nitropropane |
0 % |
1.1.2008-31.12.2008 |
ex290420 00 |
40 |
2-Nitropropane |
0 % |
1.1.2008-31.12.2008 |
ex290420 00 |
50 |
2,2’-Dinitro-bibenzyl |
0 % |
1.1.2008-31.12.2008 |
ex290490 20 |
10 |
Tosyl chloride |
0 % |
1.1.2008-31.12.2008 |
ex290490 40 |
10 |
Trichloronitromethane, for the manufacture of goods of subheading 3808 92 (1) |
0 % |
1.1.2008-31.12.2008 |
ex290490 85 |
10 |
Quintozene (ISO) |
0 % |
1.1.2008-31.12.2008 |
ex290490 85 |
20 |
1-Chloro-2,4-dinitrobenzene |
0 % |
1.1.2008-31.12.2008 |
ex290490 85 |
30 |
5-Nitro-1,2,4-trichlorobenzene |
0 % |
1.1.2008-31.12.2008 |
ex290490 85 |
40 |
3-Bromo-5-nitro-trifluoromethyl benzene |
0 % |
1.1.2008-31.12.2008 |
(4)ex290519 00 ex382490 97 |
11 56 |
Potassium tert-butanolate (potassium tert-butoxide), whether or not in the form of a solution in tetrahydrofuran |
0 % |
1.1.2008-31.12.2008 |
ex290519 00 |
30 |
2,6-Dimethylheptan-4-ol |
0 % |
1.1.2008-31.12.2008 |
ex290539 85 |
20 |
Hexa-1,5-diene-3,4-diol |
0 % |
1.1.2008-31.12.2008 |
ex290549 10 |
10 |
Ethylidynetrimethanol |
0 % |
1.1.2008-31.12.2008 |
2906 11 00 |
Menthol |
0 % |
1.1.2008-31.12.2008 |
|
ex290619 00 |
10 |
Cyclohex-1,4-ylenedimethanol |
0 % |
1.1.2008-31.12.2008 |
ex290619 00 |
20 |
4,4’-Isopropylidenedicyclohexanol |
0 % |
1.1.2008-31.12.2008 |
ex290629 00 |
10 |
2,2’-(m-Phenylene)dipropan-2-ol |
0 % |
1.1.2008-31.12.2008 |
ex290629 00 |
20 |
1-Hydroxymethyl-4-methyl-2,3,5,6-tetrafluorobenzene |
0 % |
1.1.2008-31.12.2008 |
ex290719 90 |
10 |
2,3,5-Trimethylphenol |
0 % |
1.1.2008-31.12.2008 |
ex290721 00 |
10 |
Resorcinol |
0 % |
1.1.2008-31.12.2008 |
ex290729 00 |
10 |
Disodium 1,4-dihydroanthracene-9,10-diolate, in the form of an aqueous solution |
0 % |
1.1.2008-31.12.2008 |
ex290729 00 |
20 |
4,4’-(3,3,5-Trimethylcyclohexylidene)diphenol |
0 % |
1.1.2008-31.12.2008 |
ex290729 00 |
30 |
4,4’,4’-Ethylidynetriphenol |
0 % |
1.1.2008-31.12.2008 |
ex290729 00 |
40 |
Mixture of isomers of methylenediphenol |
0 % |
1.1.2008-31.12.2008 |
ex290729 00 |
50 |
6,6’,6’’-Tricyclohexyl-4,4’,4’’-butane-1,1,3-triyltri(m-cresol) |
0 % |
1.1.2008-31.12.2008 |
ex290729 00 |
60 |
4,4’-(1,3-Phenylenediisopropylidene)diphenol |
0 % |
1.1.2008-31.12.2008 |
ex290729 00 |
70 |
2,2’,2’,6,6’,6’-Hexa-tert-butyl-α,α’,α’-(mesitylene-2,4,6-triyl)tri-p-cresol |
0 % |
1.1.2008-31.12.2008 |
ex290729 00 |
80 |
Pyrogallol |
0 % |
1.1.2008-31.12.2008 |
ex290729 00 |
85 |
Phloroglucinol whether or not hydrated |
0 % |
1.1.2008-31.12.2008 |
ex290899 10 |
10 |
Disodium 3-hydroxynaphthalene-2,7-disulfonate |
0 % |
1.1.2008-31.12.2008 |
ex290899 10 |
20 |
Dipotassium 7-hydroxynaphthalene-1,3-disulfonate |
0 % |
1.1.2008-31.12.2008 |
(4)ex290899 10 ex382490 97 |
30 74 |
6-Hydroxynaphthalene-2-sulfonic acid and its salts |
0 % |
1.1.2008-31.12.2008 |
ex290899 90 |
10 |
4-Nitroso-o-cresol |
0 % |
1.1.2008-31.12.2008 |
ex290899 90 |
30 |
4-Nitrophenol |
0 % |
1.1.2008-31.12.2008 |
ex290899 90 |
40 |
3-Nitro-p-cresol |
0 % |
1.1.2008-31.12.2008 |
(4)ex290919 90 |
10 |
1,2-Bis(2-chloroethoxy)ethane |
0 % |
1.1.2008-31.12.2008 |
(4)ex290919 90 |
20 |
Bis(2-chloroethyl) ether |
0 % |
1.1.2008-31.12.2008 |
(4)ex290919 90 |
30 |
Mixture of isomers of nonafluorobutyl methyl ether or nonafluorobutyl ethyl ether, of a purity by weight of 99 % or more |
0 % |
1.1.2008-31.12.2008 |
(4)ex290919 90 |
40 |
Bis(2-ethoxyethyl)ether |
0 % |
1.1.2008-31.12.2008 |
(4)ex290919 90 |
50 |
3-Ethoxy-perfluoro-2-methylhexane |
0 % |
1.1.2008-31.12.2011 |
ex290930 38 |
10 |
Bis(pentabromophenyl) ether |
0 % |
1.1.2008-31.12.2008 |
ex290930 90 |
10 |
4-(p-Tolyloxy)biphenyl |
0 % |
1.1.2008-31.12.2008 |
ex290930 90 |
20 |
1,2-Bis(m-tolyloxy)ethane |
0 % |
1.1.2008-31.12.2008 |
ex290930 90 |
30 |
1,2-Diphenoxyethane |
0 % |
1.1.2008-31.12.2008 |
ex290944 00 |
10 |
2-Hexyloxyethanol |
0 % |
1.1.2008-31.12.2008 |
ex290949 18 |
10 |
1-tert-Butoxypropan-2-ol |
0 % |
1.1.2008-31.12.2008 |
ex290950 90 |
10 |
4-(2-Methoxyethyl)phenol |
0 % |
1.1.2008-31.12.2008 |
ex290960 00 |
10 |
Bis(α,α-dimethylbenzyl) peroxide |
0 % |
1.1.2008-31.12.2008 |
ex291090 00 |
30 |
2,3-Epoxypropan-1-ol (glycidol) |
0 % |
1.1.2008-31.12.2008 |
ex291090 00 |
40 |
Perfluoroepoxypropane |
0 % |
1.1.2008-31.12.2008 |
(4)ex291090 00 ex382490 97 |
60 59 |
1,2-Epoxyoctadecane, of a purity by weight of 82 % or more |
0 % |
1.1.2008-31.12.2008 |
ex291090 00 |
70 |
(Epoxyethyl)benzene (styrene oxide) |
0 % |
1.1.2008-31.12.2008 |
ex291229 00 |
10 |
Terephthalaldehyde |
0 % |
1.1.2008-31.12.2008 |
ex291229 00 |
20 |
p-Phenylbenzaldehyde |
0 % |
1.1.2008-31.12.2008 |
ex291249 00 |
10 |
3-Phenoxybenzaldehyde |
0 % |
1.1.2008-31.12.2008 |
ex291249 00 |
20 |
4-Hydroxybenzaldehyde |
0 % |
1.1.2008-31.12.2011 |
ex291419 90 |
10 |
3,3-Dimethylbutan-2-one |
0 % |
1.1.2008-31.12.2008 |
(4)ex291419 90 |
20 |
Heptan-2-one |
0 % |
1.1.2008-31.12.2012 |
(4)ex291419 90 |
30 |
3-Methylbutanone |
0 % |
1.1.2008-31.12.2012 |
(4)ex291419 90 |
40 |
Pentan-2-one |
0 % |
1.1.2008-31.12.2012 |
2914 21 00 |
Camphor |
0 % |
1.1.2008-31.12.2008 |
|
ex291429 00 |
10 |
Estr-4-ene-3,17-dione |
0 % |
1.1.2008-31.12.2008 |
ex291429 00 |
20 |
Cyclohexadec-8-enone |
0 % |
1.1.2008-31.12.2008 |
ex291439 00 |
10 |
Benz[de]anthracen-7-one |
0 % |
1.1.2008-31.12.2008 |
(4)ex291439 00 |
20 |
Stearoyl benzoyl methane |
0 % |
1.1.2008-31.12.2012 |
(4)ex291439 00 |
30 |
Benzophenone |
0 % |
1.1.2008-31.12.2012 |
(4)ex291439 00 |
40 |
1,3-Diphenylpropane-1,3-dione |
0 % |
1.1.2008-31.12.2012 |
ex291450 00 |
30 |
2’-Hydroxyacetophenone |
0 % |
1.1.2008-31.12.2008 |
ex291450 00 |
40 |
4’-Hydroxyacetophenone |
0 % |
1.1.2008-31.12.2008 |
ex291450 00 |
50 |
6’-Methoxy-2’-acetonaphthone |
0 % |
1.1.2008-31.12.2008 |
(4)ex291450 00 |
60 |
2,2-Dimethoxy-2-phenylacetophenone |
0 % |
1.1.2008-31.12.2012 |
(4)ex291450 00 |
70 |
16α,17α-Epoxy-3β-hydroxypregn-5-en-20-one |
0 % |
1.1.2008-31.12.2012 |
ex291469 90 |
10 |
2-Ethylanthraquinone |
0 % |
1.1.2008-31.12.2008 |
ex291469 90 |
20 |
2-Pentylanthraquinone |
0 % |
1.1.2008-31.12.2008 |
ex291469 90 |
30 |
1,4-Dihydroxyanthraquinone |
0 % |
1.1.2008-31.12.2008 |
ex291469 90 |
40 |
2,3-Dihydro-1,4-dihydroxyanthraquinone |
0 % |
1.1.2008-31.12.2008 |
ex291469 90 |
50 |
2-Methylanthraquinone |
0 % |
1.1.2008-31.12.2008 |
ex291470 00 |
10 |
1-Chloro-3,3-dimethylbutan-2-one |
0 % |
1.1.2008-31.12.2008 |
ex291470 00 |
30 |
4,4’-Dibromobenzil |
0 % |
1.1.2008-31.12.2008 |
ex291470 00 |
40 |
Perfluoro(2-methylpentan-3-one) |
0 % |
1.1.2008-31.12.2008 |
ex291470 00 |
50 |
3’-Chloropropiophenone |
0 % |
1.1.2008-31.12.2008 |
ex291529 00 |
10 |
Antimony triacetate |
0 % |
1.1.2008-31.12.2008 |
ex291539 80 |
20 |
5α-Bromo-6β-hydroxy-17-oxo-androstan-3β-yl acetate |
0 % |
1.1.2008-31.12.2008 |
ex291539 80 |
30 |
But-3-ene-1,2-diyl di(acetate) |
0 % |
1.1.2008-31.12.2008 |
ex291539 80 |
40 |
tert-Butyl acetate |
0 % |
1.1.2008-31.12.2008 |
ex291539 80 |
50 |
3-Acetylphenyl acetate |
0 % |
1.1.2008-31.12.2008 |
ex291539 80 |
60 |
1-Phenylethyl acetate |
0 % |
1.1.2008-31.12.2008 |
ex291540 00 |
10 |
Vinyl chloroacetate |
0 % |
1.1.2008-31.12.2008 |
ex291590 80 |
20 |
Trimethyl orthoacetate |
0 % |
1.1.2008-31.12.2008 |
ex291590 80 |
30 |
2-Ethylbutyric acid |
0 % |
1.1.2008-31.12.2008 |
ex291590 80 |
40 |
Nonanoic acid (pelargonic acid) |
0 % |
1.1.2008-31.12.2008 |
ex291612 90 |
10 |
2-tert-Butyl-6-(3-tert-butyl-2-hydroxy-5-methylbenzyl)-4-methylphenyl acrylate |
0 % |
1.1.2008-31.12.2008 |
ex291612 90 |
20 |
2-Ethoxyethyl acrylate |
0 % |
1.1.2008-31.12.2008 |
ex291612 90 |
30 |
Isobutyl acrylate |
0 % |
1.1.2008-31.12.2008 |
ex291612 90 |
40 |
2,4-Di-tert-pentyl-6-[1-(3,5-di-tert-pentyl-2-hydroxyphenyl)ethyl]phenylacrylate |
0 % |
1.1.2008-31.12.2008 |
ex291613 00 |
10 |
Hydroxyzinc methacrylate, in the form of powder |
0 % |
1.1.2008-31.12.2008 |
ex291613 00 |
20 |
Zinc dimethacrylate, in the form of powder |
0 % |
1.1.2008-31.12.2008 |
ex291614 90 |
10 |
2,3-Epoxypropyl methacrylate |
0 % |
1.1.2008-31.12.2008 |
ex291619 70 |
20 |
Methyl 3,3-dimethylpent-4-enoate |
0 % |
1.1.2008-31.12.2008 |
ex291620 00 |
10 |
Methyl 3-(2,2-dichlorovinyl)-2,2-dimethylcyclopropanecarboxylate |
0 % |
1.1.2008-31.12.2008 |
ex291620 00 |
30 |
Empenthrin (ISO) |
0 % |
1.1.2008-31.12.2008 |
ex291620 00 |
50 |
Ethyl 2,2-dimethyl-3-(2-methylpropenyl)cyclopropanecarboxylate |
0 % |
1.1.2008-31.12.2008 |
ex291639 00 |
15 |
Biphenyl-4-carboxylic acid |
0 % |
1.1.2008-31.12.2008 |
ex291639 00 |
20 |
3,5-Dichlorobenzoyl chloride |
3,6 % |
1.1.2008-31.12.2008 |
ex291639 00 |
25 |
p-Toluic acid |
0 % |
1.1.2008-31.12.2008 |
ex291639 00 |
35 |
o-Chlorophenylacetic acid |
0 % |
1.1.2008-31.12.2008 |
ex291639 00 |
40 |
Vinyl 4-tert-butylbenzoate |
0 % |
1.1.2008-31.12.2008 |
ex291639 00 |
45 |
2-Chlorobenzoic acid |
0 % |
1.1.2008-31.12.2011 |
ex291639 00 |
50 |
3,5-Dimethylbenzoyl chloride |
0 % |
1.1.2008-31.12.2008 |
(4)ex291639 00 |
55 |
4-tert-Butylbenzoic acid |
0 % |
1.1.2008-31.12.2012 |
ex291639 00 |
60 |
4-Ethylbenzoyl chloride |
0 % |
1.1.2008-31.12.2008 |
ex291639 00 |
70 |
Ibuprofen (INN) |
0 % |
1.1.2008-31.12.2008 |
ex291639 00 |
80 |
Ethyl 2-(4-nitrophenyl)butyrate |
0 % |
1.1.2008-31.12.2008 |
ex291639 00 |
85 |
2,6-Difluorobenzoic acid |
0 % |
1.1.2008-31.12.2008 |
ex291711 00 |
20 |
Bis(p-methylbenzyl) oxalate |
0 % |
1.1.2008-31.12.2008 |
ex291719 90 |
20 |
Sodium 1,2-bis(cyclohexyloxycarbonyl)ethanesulfonate |
0 % |
1.1.2008-31.12.2008 |
ex291719 90 |
40 |
Dodecanedioic acid, of a purity by weight of more than 98,5 % |
0 % |
1.1.2008-31.12.2008 |
ex291719 90 |
50 |
Glutaric anhydride |
0 % |
1.1.2008-31.12.2008 |
ex291719 90 |
60 |
Diethyl isobutylmalonate |
0 % |
1.1.2008-31.12.2008 |
ex291719 90 |
70 |
Itaconic acid |
0 % |
1.1.2008-31.12.2008 |
ex291720 00 |
30 |
1,4,5,6,7,7-Hexachloro-8,9,10-trinorborn-5-ene-2,3-dicarboxylic anhydride |
0 % |
1.1.2008-31.12.2008 |
ex291720 00 |
40 |
3-Methyl-1,2,3,6-tetrahydrophthalic anhydride |
0 % |
1.1.2008-31.12.2008 |
ex291734 90 |
10 |
Diallyl phthalate |
0 % |
1.1.2008-31.12.2008 |
ex291739 80 |
10 |
Dimethyl naphthalene-2,6-dicarboxylate |
0 % |
1.1.2008-31.12.2008 |
ex291739 80 |
20 |
Benzene-1,2,4,5-tetracarboxylic acid (pyromellitic acid) |
0 % |
1.1.2008-31.12.2008 |
ex291739 80 |
30 |
Benzene-1,2:4,5-tetracarboxylic dianhydride (pyromellitic dianhydride) |
0 % |
1.1.2008-31.12.2008 |
ex291739 80 |
40 |
Biphenyl-3,4:3’,4’-tetracarboxylic dianhydride |
0 % |
1.1.2008-31.12.2008 |
ex291813 00 |
10 |
L-(-)-Di-p-toluoyltartaric acid |
0 % |
1.1.2008-31.12.2008 |
ex291819 85 |
20 |
L-Malic acid |
0 % |
1.1.2008-31.12.2008 |
ex291819 85 |
30 |
2,2-Bis(hydroxymethyl)butyric acid |
0 % |
1.1.2008-31.12.2008 |
ex291819 85 |
50 |
DL-mandelic acid |
0 % |
1.1.2008-31.12.2008 |
ex291829 10 |
10 |
Monohydroxynaphthoic acids |
0 % |
1.1.2008-31.12.2008 |
ex291829 80 |
10 |
Hexamethylene bis[3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate] |
0 % |
1.1.2008-31.12.2008 |
ex291829 80 |
20 |
Gallic acid, of a purity by weight of 98,5 % or more calculated on the dry weight (measured by acidimetry) |
0 % |
1.1.2008-31.12.2008 |
ex291829 80 |
30 |
Octadecyl-3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate |
0 % |
1.1.2008-31.12.2011 |
ex291830 00 |
20 |
2-(4-Ethylbenzoyl)benzoic acid |
0 % |
1.1.2008-31.12.2008 |
ex291899 90 |
10 |
3,4-Epoxycyclohexylmethyl 3,4-epoxycyclohexanecarboxylate |
0 % |
1.1.2008-31.12.2008 |
ex291899 90 |
20 |
Methyl 3-methoxyacrylate |
0 % |
1.1.2008-31.12.2008 |
ex291899 90 |
30 |
Methyl 2-(4-hydroxyphenoxy)propionate |
0 % |
1.1.2008-31.12.2008 |
ex291899 90 |
40 |
trans-4-Hydroxy-3-methoxycinnamic acid |
0 % |
1.1.2008-31.12.2008 |
ex291899 90 |
50 |
Methyl 3,4,5-trimethoxybenzoate |
0 % |
1.1.2008-31.12.2008 |
ex291899 90 |
60 |
3,4,5-Trimethoxybenzoic acid |
0 % |
1.1.2008-31.12.2008 |
ex291899 90 |
70 |
Methyl 5-methoxy-3-oxopentanoate |
0 % |
1.1.2008-31.12.2008 |
ex291990 90 |
10 |
2,2’-Methylenebis(4,6-di-tert-butylphenyl) phosphate, monosodium salt |
0 % |
1.1.2008-31.12.2008 |
ex291990 90 |
20 |
Diammonium salt of tetramyristoylcardiolipin |
0 % |
1.1.2008-31.12.2008 |
ex291990 90 |
30 |
Aluminium hydroxybis[2,2’-methylenebis(4,6-di-tert-butylphenyl)phosphate] |
0 % |
1.1.2008-31.12.2008 |
ex291990 90 |
40 |
Tri-n-hexylphosphate |
0 % |
1.1.2008-31.12.2008 |
ex292019 00 |
10 |
Fenitrothion (ISO) |
0 % |
1.1.2008-31.12.2008 |
ex292019 00 |
20 |
Tolclofos-methyl (ISO) |
0 % |
1.1.2008-31.12.2008 |
ex292090 10 |
10 |
Diethyl sulfate |
0 % |
1.1.2008-31.12.2008 |
ex292090 10 |
20 |
Diallyl 2,2’-oxydiethyl dicarbonate |
0 % |
1.1.2008-31.12.2008 |
ex292090 10 |
30 |
4-Ethyl-1,3-dioxolan-2-one |
0 % |
1.1.2008-31.12.2008 |
ex292090 10 |
40 |
Dimethyl carbonate |
0 % |
1.1.2008-31.12.2008 |
ex292090 10 |
50 |
Di-tert-butyl dicarbonate |
0 % |
1.1.2008-31.12.2008 |
2920 90 30 |
Trimethyl phosphite |
0 % |
1.1.2008-31.12.2008 |
|
2920 90 40 |
Triethyl phosphite |
0 % |
1.1.2008-31.12.2011 |
|
ex292090 85 |
10 |
O,O’-Dioctadecyl pentaerythritol bis(phosphite) |
0 % |
1.1.2008-31.12.2008 |
ex292090 85 |
40 |
Tritolyl phosphite |
0 % |
1.1.2008-31.12.2008 |
ex292090 85 |
50 |
Triisooctylphosphite |
0 % |
1.1.2008-31.12.2008 |
ex292119 80 |
10 |
Triallylamine |
0 % |
1.1.2008-31.12.2008 |
ex292119 80 |
20 |
Ethyl(2-methylallyl)amine |
0 % |
1.1.2008-31.12.2008 |
ex292119 80 |
30 |
Allylamine |
0 % |
1.1.2008-31.12.2008 |
ex292129 00 |
10 |
N,N,N’,N’-Tetrabutylhexamethylenediamine |
0 % |
1.1.2008-31.12.2008 |
ex292129 00 |
20 |
Tris[3-(dimethylamino)propyl]amine |
0 % |
1.1.2008-31.12.2008 |
ex292129 00 |
30 |
Bis[3-(dimethylamino)propyl]methylamine |
0 % |
1.1.2008-31.12.2008 |
ex292129 00 |
40 |
N,N’-Di-tert-butylethylenediamine |
0 % |
1.1.2008-31.12.2008 |
ex292130 99 |
10 |
Dicyclohexyl(methyl)amine |
0 % |
1.1.2008-31.12.2008 |
ex292130 99 |
20 |
Cyclohex-1,3-ylenebis(methylamine), for the manufacture of dishwashing products (1) |
0 % |
1.1.2008-31.12.2008 |
ex292142 10 |
10 |
2,6-Dichloro-4-nitroaniline |
0 % |
1.1.2008-31.12.2008 |
ex292142 10 |
15 |
4-Amino-3-nitrobenzenesulphonic acid |
0 % |
1.1.2008-31.12.2008 |
ex292142 10 |
20 |
2-Bromo-4,6-dinitroaniline |
0 % |
1.1.2008-31.12.2008 |
ex292142 10 |
25 |
Sodium hydrogen 2-aminobenzene-1,4-disulphonate |
0 % |
1.1.2008-31.12.2008 |
ex292142 10 |
30 |
4-Aminobenzene-1,3-disulfonic acid and its salts |
0 % |
1.1.2008-31.12.2008 |
ex292142 10 |
35 |
2-Nitroaniline |
0 % |
1.1.2008-31.12.2008 |
ex292142 10 |
40 |
2-Bromo-6-chloro-4-nitroaniline |
0 % |
1.1.2008-31.12.2008 |
ex292142 10 |
45 |
2,4,5-Trichloroaniline |
0 % |
1.1.2008-31.12.2008 |
ex292142 10 |
50 |
3-Aminobenzenesulfonic acid |
0 % |
1.1.2008-31.12.2008 |
ex292142 10 |
70 |
2-Aminobenzene-1,4-disulfonic acid |
0 % |
1.1.2008-31.12.2008 |
ex292142 10 |
80 |
4-Chloro-2-nitroaniline |
0 % |
1.1.2008-31.12.2008 |
ex292142 10 |
85 |
3,5-Dichloroaniline |
0 % |
1.1.2008-31.12.2008 |
ex292143 00 |
10 |
5-Amino-2-chlorotoluene-4-sulfonic acid |
0 % |
1.1.2008-31.12.2008 |
ex292143 00 |
20 |
4-Amino-6-chlorotoluene-3-sulfonic acid |
0 % |
1.1.2008-31.12.2008 |
ex292143 00 |
30 |
3-Nitro-p-toluidine |
0 % |
1.1.2008-31.12.2008 |
ex292143 00 |
40 |
4-Aminotoluene-3-sulphonic acid |
0 % |
1.1.2008-31.12.2008 |
ex292144 00 |
10 |
Methyldiphenylamine |
0 % |
1.1.2008-31.12.2008 |
ex292144 00 |
20 |
Diphenylamine |
0 % |
1.1.2008-31.12.2008 |
ex292145 00 |
10 |
Sodium hydrogen 3-aminonaphthalene-1,5-disulfonate |
0 % |
1.1.2008-31.12.2008 |
ex292145 00 |
20 |
2-Aminonaphthalene-1,5-disulfonic acid and its sodium salts |
0 % |
1.1.2008-31.12.2008 |
ex292145 00 |
30 |
2-Aminonaphthalene-1-sulfonic acid |
0 % |
1.1.2008-31.12.2008 |
ex292145 00 |
40 |
1-Naphthylamine |
0 % |
1.1.2008-31.12.2008 |
ex292149 10 |
20 |
Pendimethalin (ISO) |
3,5 % |
1.1.2008-31.12.2008 |
ex292149 80 |
10 |
8-Anilinonaphthalene-1-sulfonic acid |
0 % |
1.1.2008-31.12.2008 |
ex292149 80 |
20 |
N-1-Naphthylaniline |
0 % |
1.1.2008-31.12.2008 |
ex292151 19 |
20 |
Toluene diamine (TDA), containing by weight 78 % or more but not more than 82 % of 4-methyl-m-phenylenediamine and 18 % or more but not more than 22 % of 2-methyl-m-phenylenediamine, and with a residual tar content of not more than 0,23 % by weight |
0 % |
1.1.2008-31.12.2008 |
ex292151 19 |
30 |
2-Methyl-p-phenylenediamine sulphate |
0 % |
1.1.2008-31.12.2008 |
ex292151 19 |
40 |
p-Phenylenediamine |
0 % |
1.1.2008-31.12.2011 |
ex292159 90 |
10 |
Mixture of isomers of 3,5-diethyltoluenediamine |
0 % |
1.1.2008-31.12.2008 |
(4)ex292159 90 ex382490 97 |
20 68 |
4-(4-Aminoanilino)-3-nitrobenzenesulfonic acid |
0 % |
1.1.2008-31.12.2008 |
(4)ex292159 90 |
30 |
3,3’-dichlorobenzidine dihydrochloride |
0 % |
1.1.2008-31.12.2012 |
ex292159 90 |
40 |
4,4’-Diaminostilbene-2,2’-disulphonic acid |
0 % |
1.1.2008-31.12.2008 |
ex292219 80 |
10 |
4,4-Dimethoxybutylamine |
0 % |
1.1.2008-31.12.2008 |
ex292219 80 |
30 |
N,N,N’,N’-Tetramethyl-2,2’-oxybis(ethylamine) |
0 % |
1.1.2008-31.12.2008 |
ex292219 80 |
40 |
2-Amino-2-methylpropanol, for use in the manufacture of goods of subheadings 3004 90 and 3305 30 (1) |
0 % |
1.1.2008-31.12.2008 |
ex292219 80 |
50 |
2-(2-Methoxyphenoxy)ethylamine |
0 % |
1.1.2008-31.12.2008 |
ex292219 80 |
60 |
N,N,N’-trimethyl-N’-(2-hydroxy-ethyl) 2,2’-oxybis(ethylamine) |
0 % |
1.1.2008-31.12.2008 |
ex292219 80 |
70 |
D-(-)-threo-2-amino-1-(p-nitrophenyl)propane-1,3-diol |
0 % |
1.1.2008-31.12.2011 |
ex292221 00 |
10 |
2-Amino-5-hydroxynaphthalene-1,7-disulfonic acid and its salts, of a purity by weight of 60 % or more |
0 % |
1.1.2008-31.12.2008 |
ex292221 00 |
20 |
4-Hydroxy-7-methylaminonaphthalene-2-sulfonic acid |
0 % |
1.1.2008-31.12.2008 |
ex292221 00 |
30 |
6-Amino-4-hydroxynaphthalene-2-sulfonic acid |
0 % |
1.1.2008-31.12.2008 |
ex292221 00 |
40 |
7-Amino-4-hydroxynaphthalene-2-sulfonic acid |
0 % |
1.1.2008-31.12.2008 |
ex292221 00 |
50 |
Sodium hydrogen 4-amino-5-hydroxynaphthalene-2,7-disulphonate |
0 % |
1.1.2008-31.12.2008 |
ex292229 00 |
10 |
2-Methyl-N-phenyl-p-anisidine |
0 % |
1.1.2008-31.12.2008 |
ex292229 00 |
15 |
N-Methyl-2-(3,4-dimethoxyphenyl)ethylamine |
0 % |
1.1.2008-31.12.2008 |
ex292229 00 |
20 |
3-Aminophenol |
0 % |
1.1.2008-31.12.2008 |
ex292229 00 |
25 |
5-Amino-o-cresol |
0 % |
1.1.2008-31.12.2008 |
ex292229 00 |
30 |
4-Amino-5-methoxy-2-methylbenzenesulfonic acid |
0 % |
1.1.2008-31.12.2008 |
ex292229 00 |
35 |
2-Amino-4,6-dinitrophenol sodium salt, containing at least 20 % water |
0 % |
1.1.2008-31.12.2011 |
ex292229 00 |
40 |
2-Amino-4-tert-pentyl-6-nitrophenol |
0 % |
1.1.2008-31.12.2008 |
ex292229 00 |
45 |
Anisidines |
0 % |
1.1.2008-31.12.2008 |
ex292229 00 |
50 |
6-Methoxy-m-toluidine |
0 % |
1.1.2008-31.12.2008 |
ex292229 00 |
60 |
3,5-Dichloro-4-(1,1,2,2-tetrafluoroethoxy)aniline |
0 % |
1.1.2008-31.12.2008 |
ex292229 00 |
70 |
4-Nitro-o-anisidine |
0 % |
1.1.2008-31.12.2008 |
ex292229 00 |
80 |
3-Diethylaminophenol |
0 % |
1.1.2008-31.12.2008 |
ex292239 00 |
10 |
1-Amino-4-bromo-9,10-dioxoanthracene-2-sulfonic acid and its salts |
0 % |
1.1.2008-31.12.2008 |
ex292239 00 |
20 |
1-Aminoanthraquinone |
0 % |
1.1.2008-31.12.2008 |
ex292239 00 |
30 |
1-Bromo-4-methylaminoanthraquinone |
0 % |
1.1.2008-31.12.2008 |
ex292239 00 |
40 |
1,4-Diamino-2,3-dichloroanthraquinone |
0 % |
1.1.2008-31.12.2008 |
ex292239 00 |
50 |
2-Aminoanthraquinone |
0 % |
1.1.2008-31.12.2008 |
ex292239 00 |
60 |
1,4-Diamino-2,3-dihydroanthraquinone |
0 % |
1.1.2008-31.12.2008 |
ex292239 00 |
70 |
p-[(2-Chloroethyl)ethylamino]benzaldehyde |
0 % |
1.1.2008-31.12.2011 |
ex292243 00 |
10 |
Anthranilic acid |
0 % |
1.1.2008-31.12.2008 |
ex292249 95 |
10 |
Ornithine aspartate (INNM) |
0 % |
1.1.2008-31.12.2008 |
ex292249 95 |
20 |
12-Aminododecanoic acid |
0 % |
1.1.2008-31.12.2008 |
ex292249 95 |
30 |
DL-Aspartic acid |
0 % |
1.1.2008-31.12.2008 |
ex292249 95 |
40 |
Norvaline |
0 % |
1.1.2008-31.12.2008 |
ex292249 95 |
50 |
D-(-)-Dihydrophenylglycine |
0 % |
1.1.2008-31.12.2008 |
(4)ex292249 95 |
60 |
Ethyl-4-dimethylaminobenzoate |
0 % |
1.1.2008-31.12.2012 |
ex292250 00 |
30 |
2-(3-Amino-4-chlorobenzoyl)benzoic acid |
0 % |
1.1.2008-31.12.2008 |
ex292250 00 |
50 |
2-(4-Dibutylaminosalicyloyl)benzoic acid |
0 % |
1.1.2008-31.12.2008 |
ex292250 00 |
70 |
2-(1-Hydroxycyclohexyl)-2-(4-methoxyphenyl)ethylammonium acetate |
0 % |
1.1.2008-31.12.2008 |
ex292390 00 |
10 |
Tetramethylammonium hydroxide, in the form of an aqueous solution containing: — (25 ± 0,5) % by weight of tetramethylammonium hydroxide, — 500 mg/kg or less of carbonate, — 200 mg/kg or less of chloride and — 5 mg/kg or less of potassium |
0 % |
1.1.2008-31.12.2008 |
ex292390 00 |
15 |
3-Chloro-2-hydroxypropyldimethyldodecylammoniumchloride in the form of an aqueous solution |
0 % |
1.1.2008-31.12.2008 |
ex292390 00 |
30 |
Tetramethylammonium hydroxide pentahydrate, of a purity by weight of 98 % or more |
0 % |
1.1.2008-31.12.2008 |
ex292390 00 |
35 |
Tetrabutylammonium fluoride trihydrate |
0 % |
1.1.2008-31.12.2011 |
ex292390 00 |
40 |
Benzyldimethyl(octadecyl)ammonium salts, for use in the manufacture of toner for photocopiers (1) |
0 % |
1.1.2008-31.12.2008 |
ex292390 00 |
50 |
Tetraethylammonium hydroxide, in the form of an aqueous solution containing: — (35 ± 0,5) % by weight of tetraethylammonium hydroxide, — 2 000 mg/kg or less of chloride, — 2 mg/kg or less of iron and — 10 mg/kg or less of potasium |
0 % |
1.1.2008-31.12.2008 |
ex292390 00 |
60 |
Tetrabutylammonium hydroxide, in the form of an aqueous solution containing by weight: — (55 ± 1,0) % of tetrabutylammonium hydroxide, — 0,5 % or less of bromide, — 0,4 % or less of tributylamine, — 0,3 % or less of carbonate and — 0,2 % or less of potassium and sodium taken together |
0 % |
1.1.2008-31.12.2008 |
ex292390 00 |
70 |
Tetrapropylammonium hydroxide, in the form of an aqueous solution containing: — (40 ± 2) % by weight of tetrapropylammonium hydroxide, — 0,3 % by weight or less of carbonate, — 0,1 % by weight or less of tripropylamine, — 500 mg/kg or less of bromide and — 25 mg/kg or less of potassium and sodium taken together |
0 % |
1.1.2008-31.12.2008 |
ex292390 00 |
80 |
Diallyldimethylammonium chloride, in the form of an aqueous solution containing by weight 63 % or more but not more than 67 % of diallyldimethylammonium chloride |
0 % |
1.1.2008-31.12.2008 |
ex292419 00 |
10 |
2-Acrylamido-2-methylpropanesulfonic acid and its sodium or ammonium salts |
0 % |
1.1.2008-31.12.2008 |
ex292419 00 |
30 |
Methyl 2-acetamido-3-chloropropionate |
0 % |
1.1.2008-31.12.2008 |
ex292419 00 |
40 |
N-(1,1-Dimethyl-3-oxobutyl)acrylamide |
0 % |
1.1.2008-31.12.2008 |
ex292419 00 |
50 |
Acrylamide |
0 % |
1.1.2008-31.12.2008 |
ex292419 00 |
60 |
N,N-Dimethylacrylamide |
0 % |
1.1.2008-31.12.2011 |
(4)ex292421 90 ex382490 97 |
10 62 |
4,4’-Dihydroxy-7,7’-ureylenedi(naphthalene-2-sulfonic acid) and its sodium salts |
0 % |
1.1.2008-31.12.2008 |
ex292429 95 |
10 |
Alachlor (ISO) |
0 % |
1.1.2008-31.12.2008 |
ex292429 95 |
15 |
Acetochlor (ISO) |
0 % |
1.1.2008-31.12.2008 |
ex292429 95 |
20 |
3’-Amino-4’-methoxyacetanilide |
0 % |
1.1.2008-31.12.2008 |
ex292429 95 |
25 |
3’-Diethylaminoacetanilide |
0 % |
1.1.2008-31.12.2008 |
ex292429 95 |
30 |
Propachlor (ISO) |
0 % |
1.1.2008-31.12.2008 |
ex292429 95 |
35 |
Diethofencarb (ISO) |
0 % |
1.1.2008-31.12.2008 |
ex292429 95 |
40 |
7-Acetamido-4-hydroxynaphthalene-2-sulfonic acid and its sodium salts |
0 % |
1.1.2008-31.12.2008 |
ex292429 95 |
45 |
3’-Diethylamino-4’-methoxyacetanilide |
0 % |
1.1.2008-31.12.2008 |
ex292429 95 |
50 |
5-[N-(2-Acetoxyethyl)acetoxyacetamido]-N,N’-bis(2,3-diacetoxypropyl)-2,4,6-triiodoisophthalamide |
0 % |
1.1.2008-31.12.2008 |
ex292429 95 |
55 |
4’-Amino-N-methylacetanilide |
0 % |
1.1.2008-31.12.2008 |
ex292429 95 |
60 |
Beflubutamid (ISO) |
0 % |
1.1.2008-31.12.2008 |
ex292429 95 |
65 |
2-(4-Hydroxyphenyl)acetamide |
0 % |
1.1.2008-31.12.2008 |
ex292429 95 |
70 |
4-Acetamido-2-aminobenzenesulfonic acid |
0 % |
1.1.2008-31.12.2008 |
ex292429 95 |
75 |
3-Amino-p-anisanilide |
0 % |
1.1.2008-31.12.2008 |
ex292429 95 |
80 |
5’-Chloro-3-hydroxy-2’,4’-dimethoxy-2-naphtanilide |
0 % |
1.1.2008-31.12.2008 |
ex292429 95 |
85 |
p-Aminobenzamide |
0 % |
1.1.2008-31.12.2008 |
(4)ex292429 95 |
86 |
Anthranilamide of a purity by weight of 99,5 % or more |
0 % |
1.1.2008-31.12.2012 |
ex292429 95 |
91 |
3-Hydroxy-2’-methoxy-2-naphthanilide |
0 % |
1.1.2008-31.12.2008 |
ex292429 95 |
92 |
3-Hydroxy-2-naphthanilide |
0 % |
1.1.2008-31.12.2008 |
ex292429 95 |
93 |
3-Hydroxy-2’-methyl-2-naphthanilide |
0 % |
1.1.2008-31.12.2008 |
ex292429 95 |
94 |
2’-Ethoxy-3-hydroxy-2-naphthanilide |
0 % |
1.1.2008-31.12.2008 |
ex292429 95 |
95 |
N-{3-[3-(Dimethylamino)prop-2-enoyl]phenyl}-N-ethylacetamide |
0 % |
1.1.2008-31.12.2008 |
ex292429 95 |
96 |
4’-Chloro-3-hydroxy-2’,5’-dimethoxy-2-naphthanilide |
0 % |
1.1.2008-31.12.2008 |
ex292429 95 |
97 |
1,1-Cyclohexanediacetic acid monoamide |
0 % |
1.1.2008-31.12.2008 |
ex292511 00 |
20 |
Saccharin and its sodium salt |
0 % |
1.1.2008-31.12.2008 |
ex292519 95 |
10 |
N-Phenylmaleimide |
0 % |
1.1.2008-31.12.2008 |
ex292519 95 |
20 |
N-(9-Fluorenylmethoxycarbonyloxy)succinimide |
0 % |
1.1.2008-31.12.2008 |
ex292529 00 |
10 |
Dicyclohexylcarbodiimide |
0 % |
1.1.2008-31.12.2008 |
ex292690 95 |
10 |
Methacrylonitrile |
0 % |
1.1.2008-31.12.2008 |
ex292690 95 |
15 |
Cyano(3-phenoxyphenyl)methyl 3-(2,2-dichlorovinyl)-2,2-dimethylcyclopropanecarboxylate |
0 % |
1.1.2008-31.12.2008 |
ex292690 95 |
20 |
2-(m-Benzoylphenyl)propiononitrile |
0 % |
1.1.2008-31.12.2008 |
ex292690 95 |
25 |
Aminoacetonitrile hydrochloride |
0 % |
1.1.2008-31.12.2008 |
ex292690 95 |
30 |
2-Amino-5-nitrobenzonitrile |
0 % |
1.1.2008-31.12.2008 |
ex292690 95 |
35 |
2-Bromo-2(bromomethyl)pentanedinitrile |
0 % |
1.1.2008-31.12.2008 |
ex292690 95 |
45 |
2-Cyanoacetamide |
0 % |
1.1.2008-31.12.2008 |
ex292690 95 |
50 |
Alkyl or alkoxyalkyl esters of cyanoacetic acid |
0 % |
1.1.2008-31.12.2008 |
ex292690 95 |
55 |
Methyl-2-cyano-2-phenylbutyrate |
0 % |
1.1.2008-31.12.2011 |
ex292690 95 |
60 |
Cyanoacetic acid in crystalline form |
0 % |
1.1.2008-31.12.2008 |
ex292690 95 |
61 |
m-(1-Cyanoethyl)benzoic acid |
0 % |
1.1.2008-31.12.2011 |
ex292690 95 |
65 |
Malononitrile |
0 % |
1.1.2008-31.12.2008 |
ex292690 95 |
70 |
Tetrachloroterephthalonitrile |
0 % |
1.1.2008-31.12.2008 |
ex292690 95 |
75 |
Ethyl 2-cyano-2-ethyl-3-methylhexanoate |
0 % |
1.1.2008-31.12.2008 |
ex292690 95 |
80 |
Ethyl 2-cyano-2-phenylbutyrate |
0 % |
1.1.2008-31.12.2008 |
ex292690 95 |
85 |
Ethyl 2-allyl-2-cyano-3-methylhexanoate |
0 % |
1.1.2008-31.12.2008 |
ex292690 95 |
86 |
Ethylenediaminetetraacetonitrile |
0 % |
1.1.2008-31.12.2008 |
ex292690 95 |
87 |
Nitrilotriacetonitrile |
0 % |
1.1.2008-31.12.2008 |
ex292690 95 |
88 |
1,3-Propylenediaminetetraacetonitrile |
0 % |
1.1.2008-31.12.2008 |
ex292690 95 |
89 |
Butyronitrile |
0 % |
1.1.2008-31.12.2008 |
ex292700 00 |
10 |
2,2’-Dimethyl-2,2’-azodipropionamidine dihydrochloride |
0 % |
1.1.2008-31.12.2008 |
ex292700 00 |
20 |
4-Anilino-2-methoxybenzenediazonium hydrogen sulfate |
0 % |
1.1.2008-31.12.2008 |
(4)ex292700 00 ex382490 97 |
30 69 |
4’-Aminoazobenzene-4-sulfonic acid |
0 % |
1.1.2008-31.12.2008 |
ex292700 00 |
40 |
2-Hydroxynaphthalene-1-diazonium-4-sulfonate |
0 % |
1.1.2008-31.12.2008 |
(4)ex292700 00 ex382490 97 |
50 41 |
2-Hydroxy-6-nitronaphthalene-1-diazonium-4-sulfonate, of a purity by weight of 60 % or more |
0 % |
1.1.2008-31.12.2008 |
ex292700 00 |
60 |
4,4’-Dicyano-4,4’-azodivaleric acid |
0 % |
1.1.2008-31.12.2008 |
ex292800 90 |
10 |
3,3’-Bis(3,5-di-tert-butyl-4-hydroxyphenyl)-N,N’-bipropionamide |
0 % |
1.1.2008-31.12.2008 |
ex292800 90 |
15 |
1,1’-(Hydroxyimino)bis-(2-propanol) |
0 % |
1.1.2008-31.12.2011 |
ex292800 90 |
20 |
2,4,6-Trichlorophenylhydrazine |
0 % |
1.1.2008-31.12.2008 |
ex292800 90 |
40 |
O-Ethylhydroxylamine, in the form of an aqueous solution |
0 % |
1.1.2008-31.12.2008 |
ex292800 90 |
50 |
N-Isopropylhydroxylamine, in the form of an aqueous solution |
0 % |
1.1.2008-31.12.2008 |
ex292800 90 |
60 |
Adipohydrazide |
0 % |
1.1.2008-31.12.2008 |
ex292800 90 |
70 |
Tetrakis(4-methylpentan-2-oximino)silane |
0 % |
1.1.2008-31.12.2008 |
ex292800 90 |
80 |
Cyflufenamid (ISO) |
0 % |
1.1.2008-31.12.2008 |
ex292910 90 |
10 |
Methylenedicyclohexyl diisocyanates |
0 % |
1.1.2008-31.12.2008 |
ex292910 90 |
30 |
3,3’-Dimethylbiphenyl-4,4’-diyl diisocyanate |
0 % |
1.1.2008-31.12.2008 |
ex292910 90 |
40 |
m-Isopropenyl-α,α-dimethylbenzyl isocyanate |
0 % |
1.1.2008-31.12.2008 |
ex292910 90 |
50 |
m-Phenylenediisopropylidene diisocyanate |
0 % |
1.1.2008-31.12.2008 |
ex292910 90 |
60 |
Trimethylhexamethylene diisocyanate, mixed isomers |
0 % |
1.1.2008-31.12.2008 |
ex292910 90 |
70 |
9,9’-(3-Heptyl-4-pentylcyclohex-1,2-ylene)dinonyl diisocyanate |
0 % |
1.1.2008-31.12.2008 |
ex292910 90 |
80 |
1,3-Bis(isocyanatomethyl) benzene |
0 % |
1.1.2008-31.12.2011 |
ex292990 00 |
20 |
Ethyl isocyanoacetate |
0 % |
1.1.2008-31.12.2008 |
(4)ex293020 00 |
10 |
Prosulfocarb (ISO) |
0 % |
1.1.2008-31.12.2012 |
ex293090 85 |
10 |
Thiophenol |
0 % |
1.1.2008-31.12.2008 |
ex293090 85 |
15 |
Ethoprophos (ISO) |
0 % |
1.1.2008-31.12.2008 |
ex293090 85 |
20 |
3,3-Dimethyl-1-methylthiobutanone oxime |
0 % |
1.1.2008-31.12.2008 |
ex293090 85 |
25 |
Thiophanate-methyl (ISO) |
0 % |
1.1.2008-31.12.2008 |
ex293090 85 |
30 |
4-(4-Isopropoxyphenylsulfonyl)phenol |
0 % |
1.1.2008-31.12.2008 |
ex293090 85 |
35 |
Glutathione |
0 % |
1.1.2008-31.12.2011 |
ex293090 85 |
40 |
3,3’-Thiodi(propionic acid) |
0 % |
1.1.2008-31.12.2008 |
ex293090 85 |
45 |
2-[(p-Aminophenyl)sulfonyl]ethyl hydrogen sulfate |
0 % |
1.1.2008-31.12.2008 |
(4)ex293090 85 ex382490 97 |
50 51 |
2-Chlorophenylsulfonyl isocyanate, in the form of a solution in xylene |
0 % |
1.1.2008-31.12.2008 |
ex293090 85 |
60 |
Methyl phenyl sulfide |
0 % |
1.1.2008-31.12.2008 |
ex293090 85 |
65 |
Diiodomethyl p-tolyl sulfone |
0 % |
1.1.2008-31.12.2008 |
(4)ex293090 85 |
66 |
Diphenyl sulphide |
0 % |
1.1.2008-31.12.2012 |
(4)ex293090 85 |
67 |
3-Bromomethyl-2-chloro-4-(methylsulphonyl)-benzoic acid |
0 % |
1.1.2008-31.12.2012 |
(4)ex293090 85 |
68 |
Clethodim (ISO) |
0 % |
1.1.2008-31.12.2012 |
(4)ex293090 85 |
69 |
2-Amino-4-methylsulphonyl-N-methylaniline |
0 % |
1.1.2008-31.12.2012 |
(4)ex293090 85 ex382490 97 |
70 71 |
2-Aminophenyl phenyl sulfone, of a purity by weight of 75 % or more |
0 % |
1.1.2008-31.12.2008 |
(4)ex293090 85 |
71 |
Triphenylsulphonium chloride |
0 % |
1.1.2008-31.12.2012 |
ex293090 85 |
75 |
4,4’-[Methylenebis(oxyethylenethio)]diphenol |
0 % |
1.1.2008-31.12.2008 |
ex293090 85 |
76 |
2,2’-Dithiodi(benzoic acid) |
0 % |
1.1.2008-31.12.2008 |
ex293090 85 |
77 |
4-[4-(2-Propenyloxy)phenylsulphonyl]phenol |
0 % |
1.1.2008-31.12.2008 |
ex293090 85 |
78 |
4-Mercaptomethyl-3,6-dithia-1,8-octanedithiol |
0 % |
1.1.2008-31.12.2011 |
ex293090 85 |
80 |
Captan (ISO) |
0 % |
1.1.2008-31.12.2008 |
ex293090 85 |
85 |
Mesotrione (ISO) |
0 % |
1.1.2008-31.12.2008 |
ex293090 85 |
86 |
4-Hydroxybenzenethiol |
0 % |
1.1.2008-31.12.2008 |
ex293090 85 |
87 |
3-Sulfinobenzoic acid |
0 % |
1.1.2008-31.12.2008 |
ex293090 85 |
88 |
Methylene dithiocyanate |
0 % |
1.1.2008-31.12.2008 |
ex293090 85 |
89 |
Potassium- or sodium-salt of O-ethyl-, O-isopropyl-, O-butyl-, O-isobutyl- or O-pentyl-dithiocarbonates |
0 % |
1.1.2008-31.12.2011 |
2931 00 10 |
Dimethyl methylphosphonate |
0 % |
1.1.2008-31.12.2008 |
|
ex293100 95 |
05 |
Butylethylmagnesium, in the form of a solution in heptane |
0 % |
1.1.2008-31.12.2008 |
ex293100 95 |
10 |
2-Diphenylphosphinobenzoic acid |
0 % |
1.1.2008-31.12.2008 |
ex293100 95 |
20 |
Bis(2-chloroethyl) 2-chloroethylphosphonate |
0 % |
1.1.2008-31.12.2008 |
ex293100 95 |
25 |
Sodium phenylphosphinate |
0 % |
1.1.2008-31.12.2008 |
ex293100 95 |
30 |
Bis(2-chloroethyl) vinylphosphonate |
0 % |
1.1.2008-31.12.2008 |
ex293100 95 |
35 |
Sodium tetraphenylborate |
0 % |
1.1.2008-31.12.2008 |
ex293100 95 |
40 |
N-(Phosphonomethyl)iminodiacetic acid |
0 % |
1.1.2008-31.12.2008 |
ex293100 95 |
45 |
Tributylphosphine |
0 % |
1.1.2008-31.12.2008 |
ex293100 95 |
50 |
Bis(2,4,4-trimethylpentyl)phosphinic acid |
0 % |
1.1.2008-31.12.2008 |
ex293100 95 |
55 |
Dimethyl[dimethylsilyldiindenyl]hafnium |
0 % |
1.1.2008-31.12.2008 |
ex293100 95 |
60 |
Trioctylphosphine oxide |
0 % |
1.1.2008-31.12.2008 |
ex293100 95 |
65 |
Triethylborane |
0 % |
1.1.2008-31.12.2008 |
ex293100 95 |
70 |
N,N-Dimethylanilinium tetrakis(pentafluorophenyl)borate |
0 % |
1.1.2008-31.12.2008 |
ex293100 95 |
75 |
{2,7-Di-tert-butyl-9-[(η 5-cyclopentadienyl)bis(4-triethylsilylphenyl)methyl]-4a,4b,8a,9,9a-η-fluorene}dimethylhafnium, in the form of a solution in hexane |
0 % |
1.1.2008-31.12.2008 |
ex293100 95 |
84 |
Methylbis(4-methylpentan-2-oximino)vinylsilane |
0 % |
1.1.2008-31.12.2008 |
ex293100 95 |
85 |
Tributyl(tetradecyl)phosphonium chloride, whether or not in the form of an aqueous solution |
0 % |
1.1.2008-31.12.2008 |
ex293100 95 |
86 |
Mixture of the isomers 9-icosyl-9-phosphabicyclo[3.3.1]nonane and 9-icosyl-9-phosphabicyclo[4.2.1]nonane |
0 % |
1.1.2008-31.12.2008 |
ex293100 95 |
87 |
Tris(4-methylpentan-2-oximino)methylsilane |
0 % |
1.1.2008-31.12.2008 |
ex293100 95 |
88 |
Tris(4-methylpentan-2-oximino)vinylsilane |
0 % |
1.1.2008-31.12.2008 |
ex293100 95 |
89 |
Tetrabutylphosphonium acetate, in the form of an aqueous solution |
0 % |
1.1.2008-31.12.2008 |
ex293100 95 |
91 |
Trimethylsilane |
0 % |
1.1.2008-31.12.2011 |
ex293100 95 |
95 |
Trichloro(3-chloropropyl)silane |
0 % |
1.1.2008-31.12.2008 |
ex293100 95 |
96 |
3-(Hydroxyphenylphosphinoyl)propionic acid |
0 % |
1.1.2008-31.12.2008 |
ex293100 95 |
97 |
Potassium 4-tolylphosphinate, in the form of an aqueous solution |
0 % |
1.1.2008-31.12.2008 |
ex293213 00 |
10 |
Tetrahydrofurfuryl alcohol |
0 % |
1.1.2008-31.12.2008 |
ex293219 00 |
40 |
Furan of a purity by weight of 99 % or more |
0 % |
1.1.2008-31.12.2008 |
ex293219 00 |
50 |
2,3-Dihydrofuran |
0 % |
1.1.2008-31.12.2008 |
ex293219 00 |
70 |
Furfurylamine |
0 % |
1.1.2008-31.12.2008 |
ex293219 00 |
75 |
Tetrahydro-2-methylfuran |
0 % |
1.1.2008-31.12.2008 |
ex293219 00 |
80 |
Octafluorotetrahydrofuran |
0 % |
1.1.2008-31.12.2008 |
ex293229 85 |
10 |
2’-Anilino-6’-[ethyl(isopentyl)amino]-3’-methylspiro[isobenzofuran-1(3H),9’-xanthen]-3-one |
0 % |
1.1.2008-31.12.2008 |
ex293229 85 |
15 |
13,14,15,16-Tetranorlabdano-12,8α-lactone |
0 % |
1.1.2008-31.12.2008 |
ex293229 85 |
25 |
2’-(2-Chloroanilino)-6’-dibutylaminospiro[isobenzofuran-1(3H),9’-xanthen]-3-one |
0 % |
1.1.2008-31.12.2008 |
ex293229 85 |
30 |
2’-Anilino-3’-methyl-6’-methyl(propyl)aminospiro[isobenzofuran-1(3H),9’-xanthen]-3-one |
0 % |
1.1.2008-31.12.2008 |
ex293229 85 |
35 |
6’-Diethylamino-3’-methyl-2’-(2,4-xylidino)spiro[isobenzofuran-1(3H),9’-xanthen]-3-one |
0 % |
1.1.2008-31.12.2008 |
ex293229 85 |
40 |
2’-Anilino-6’-(N-ethyl-p-toluidino)-3’-methylspiro[isobenzofuran-1(3H),9’-xanthen]-3-one |
0 % |
1.1.2008-31.12.2008 |
ex293229 85 |
45 |
2’-Anilino-6’-ethyl(isobutyl)amino-3’-methylspiro[isobenzofuran-1(3H),9’-xanthen]-3-one |
0 % |
1.1.2008-31.12.2008 |
ex293229 85 |
50 |
2’-Anilino-6’-cyclohexyl(methyl)amino-3’-methylspiro[isobenzofuran-1(3H),9’-xanthen]-3-one |
0 % |
1.1.2008-31.12.2008 |
ex293229 85 |
55 |
6-Dimethylamino-3,3-bis(4-dimethylaminophenyl)phthalide |
0 % |
1.1.2008-31.12.2008 |
ex293229 85 |
60 |
6’-(Dibutylamino)-3’-methyl-2’-(phenylamino)-spiro[isobenzofuran-1(3H),9’-[9H]xanthen]-3-one |
0 % |
1.1.2008-31.12.2011 |
ex293229 85 |
70 |
3’,6’-Bis(ethylamino)-2’,7’-dimethylspiro[isobenzofuran-1(3H),9’-[9H]-xanthen]-3-one |
0 % |
1.1.2008-31.12.2008 |
ex293229 85 |
71 |
6’-(Diethylamino)-3’-methyl-2’-(phenylamino)-spiro[isobenzofuran-1(3H),9’-[9H]xanthen]-3-one |
0 % |
1.1.2008-31.12.2011 |
ex293229 85 |
72 |
2’-[Bis(phenylmethyl)amino]-6’-(diethylamino)-spiro[isobenzofuran-1(3H),9’-[9H]xanthen]-3-one |
0 % |
1.1.2008-31.12.2011 |
ex293229 85 |
80 |
Gibberellic acid with a minimum purity by weight of 88 % |
0 % |
1.1.2008-31.12.2008 |
ex293299 70 |
10 |
Bendiocarb (ISO) |
0 % |
1.1.2008-31.12.2008 |
ex293299 70 |
20 |
Androsta-1,4-diene-3,17-dione 17-(2,2-dimethylpropylene) acetal |
0 % |
1.1.2008-31.12.2008 |
ex293299 70 |
40 |
1,3:2,4-Bis-O-(3,4-dimethylbenzylidene)-D-glucitol |
0 % |
1.1.2008-31.12.2008 |
ex293299 70 |
50 |
5-Propyl-1,3-benzodioxole |
0 % |
1.1.2008-31.12.2008 |
ex293299 70 |
60 |
Calcium bis[4-O-(β-D-galactopyranosyl)-D-gluconate] dihydrate |
0 % |
1.1.2008-31.12.2008 |
ex293299 70 |
70 |
1,3:2,4-bis-O-Benzylidene-D-glucitol |
0 % |
1.1.2008-31.12.2011 |
ex293299 70 |
75 |
3-(3,4-Methylenedioxyphenyl)-2-methylpropanal |
0 % |
1.1.2008-31.12.2011 |
ex293299 70 |
80 |
1,3:2,4-bis-O-(4-Methylbenzylidene)-D-glucitol |
0 % |
1.1.2008-31.12.2011 |
ex293299 85 |
20 |
(2-Butylbenzofuran-3-yl) (4-hydroxy-3,5-diiodophenyl) ketone |
0 % |
1.1.2008-31.12.2008 |
ex293299 85 |
30 |
Carbofuran (ISO) |
0 % |
1.1.2008-31.12.2008 |
ex293319 90 |
20 |
4-Amino-1-methyl-3-propylpyrazole-5-carboxamide |
0 % |
1.1.2008-31.12.2008 |
ex293319 90 |
30 |
3-Methyl-1-p-tolyl-5-pyrazolone |
0 % |
1.1.2008-31.12.2008 |
ex293319 90 |
40 |
Edaravone (INN) |
0 % |
1.1.2008-31.12.2008 |
ex293319 90 |
50 |
Fenpyroximate (ISO) |
0 % |
1.1.2008-31.12.2008 |
ex293321 00 |
10 |
Hydantoin |
0 % |
1.1.2008-31.12.2008 |
ex293321 00 |
20 |
2-(3-Benzyl-2,5-dioxoimidazolidin-1-yl)-2’-chloro-5’-(3-dodecylsulfonyl-2-methylpropionamido)-4,4-dimethyl-3-oxovaleranilide |
0 % |
1.1.2008-31.12.2008 |
ex293321 00 |
40 |
1-[1,3-Bis(hydroxymethyl)-2,5-dioxoimidazolidin-4-yl]-1,3-bis(hydroxymethyl)urea |
0 % |
1.1.2008-31.12.2008 |
ex293321 00 |
50 |
1-Bromo-3-chloro-5,5-dimethylhydantoin |
0 % |
1.1.2008-31.12.2011 |
ex293321 00 |
60 |
DL-p-Hydroxyphenylhydantoin |
0 % |
1.1.2008-31.12.2011 |
ex293321 00 |
70 |
α-(4-Methoxybenzoyl)-α-(1-benzyl-5-ethoxy-3-hydantoinyl)-2-chloro-5-dodecyloxycarbonylacetanilide |
0 % |
1.1.2008-31.12.2011 |
ex293329 90 |
20 |
Reaction product consisting of the methyl esters of (±)-6-(4-isopropyl-4-methyl-5-oxo-2-imidazolin-2-yl)-m-toluic acid and (±)-2-(4-isopropyl-4-methyl-5-oxo-2-imidazolin-2-yl)-p-toluic acid (Imazamethabenz-methyl) |
4 % |
1.1.2008-31.12.2008 |
ex293329 90 |
40 |
Triflumizole (ISO) |
0 % |
1.1.2008-31.12.2008 |
ex293329 90 |
50 |
1,3-Dimethylimidazolidin-2-one |
0 % |
1.1.2008-31.12.2008 |
ex293339 99 |
10 |
Cloperastine fendizoate (INNM) |
0 % |
1.1.2008-31.12.2008 |
ex293339 99 |
15 |
Pyridine-2,3-dicarboxylic acid |
0 % |
1.1.2008-31.12.2008 |
ex293339 99 |
20 |
5-Methyl-2-pyridylamine |
0 % |
1.1.2008-31.12.2008 |
ex293339 99 |
25 |
Imazethapyr (ISO) |
0 % |
1.1.2008-31.12.2008 |
ex293339 99 |
30 |
4,4’-Trimethylenedipiperidine |
0 % |
1.1.2008-31.12.2008 |
ex293339 99 |
35 |
Aminopyralid (ISO) |
0 % |
1.1.2008-31.12.2008 |
ex293339 99 |
40 |
2-Chloropyridine |
0 % |
1.1.2008-31.12.2008 |
ex293339 99 |
45 |
3-(Carboxymethyl)pyridinium chloride |
0 % |
1.1.2008-31.12.2008 |
ex293339 99 |
50 |
N-Fluoro-2,6-dichloropyridinium tetrafluoroborate |
0 % |
1.1.2008-31.12.2011 |
ex293339 99 |
60 |
2-Fluoro-6-(trifluoromethyl)pyridine |
0 % |
1.1.2008-31.12.2008 |
ex293339 99 |
65 |
Acetamiprid (ISO) |
0 % |
1.1.2008-31.12.2008 |
ex293339 99 |
75 |
Picolinafen (ISO) |
0 % |
1.1.2008-31.12.2008 |
ex293349 10 |
10 |
Quinmerac (ISO) |
0 % |
1.1.2008-31.12.2008 |
ex293349 90 |
20 |
5,7-Dichloro-4-(4-fluorophenoxy)quinoline |
0 % |
1.1.2008-31.12.2008 |
ex293349 90 |
40 |
N-Ethyl-5,6,7,8-tetrahydroquinolinium p-toluenesulfonate, in the form of a solution in water |
0 % |
1.1.2008-31.12.2008 |
ex293349 90 |
50 |
Methyl 2-[(S)-3-{(E)-3-[2-(7-chloro-2-quinolyl)vinyl]phenyl}-3-hydroxypropyl] benzoate monohydrate |
0 % |
1.1.2008-31.12.2008 |
ex293349 90 |
60 |
5,6,7,8-Tetrahydroquinoline |
0 % |
1.1.2008-31.12.2008 |
ex293349 90 |
70 |
Quinolin-8-ol |
0 % |
1.1.2008-31.12.2008 |
ex293352 00 |
10 |
Malonylurea (barbituric acid) |
0 % |
1.1.2008-31.12.2011 |
ex293359 95 |
10 |
1-Ethyl-6-fluoro-1,4-dihydro-4-oxo-7-piperazin-1-yl-1,8-naphthyridine-3-carboxylic acid and its salts and esters |
0 % |
1.1.2008-31.12.2008 |
ex293359 95 |
15 |
(2R)-4-Oxo-4-[3-(trifluoromethyl)-5,6-dihydro[1,2,4]triazolo[4,3-a] pyrazin-7(8H)-yl]-1-(2,4,5-trifluorophenyl)butyl-2-ammonium phosphate monohydrate |
0 % |
1.1.2008-31.12.2008 |
ex293359 95 |
20 |
2,4-Diamino-6-chloropyrimidine |
0 % |
1.1.2008-31.12.2008 |
ex293359 95 |
25 |
2,5-Diamino-4,6-dihydroxypyrimidine monohydrochloride monohydrate |
0 % |
1.1.2008-31.12.2008 |
ex293359 95 |
30 |
Mepanipyrim (ISO) |
0 % |
1.1.2008-31.12.2008 |
ex293359 95 |
35 |
4-Amino-2,6-dichloropyrimidine |
0 % |
1.1.2008-31.12.2011 |
ex293359 95 |
40 |
Guanine |
0 % |
1.1.2008-31.12.2008 |
ex293359 95 |
50 |
1-Chloromethyl-4-fluoro-1,4-diazoniabicyclo[2.2.2]octane bis(tetrafluoroborate) |
0 % |
1.1.2008-31.12.2008 |
ex293359 95 |
60 |
2,6-Dichloro-4,8-dipiperidinopyrimido[5,4-d]pyrimidine |
0 % |
1.1.2008-31.12.2008 |
ex293359 95 |
70 |
N-(4-Ethyl-2,3-dioxopiperazin-1-ylcarbonyl)-D-2-phenylglycine |
0 % |
1.1.2008-31.12.2008 |
ex293359 95 |
80 |
N-(4-Ethyl-2,3-dioxopiperazin-1-ylcarbonyl)-D-2-(4-hydroxyphenyl)glycine |
0 % |
1.1.2008-31.12.2008 |
ex293359 95 |
85 |
Adenine |
0 % |
1.1.2008-31.12.2008 |
ex293369 80 |
20 |
1,3,5-Tris[(3,5-di-tert-butyl-4-hydroxyphenyl)methyl]-1,3,5-triazine-2,4,6(1H,3H,5H)-trione |
0 % |
1.1.2008-31.12.2008 |
ex293369 80 |
40 |
Cyanazine (ISO) |
0 % |
1.1.2008-31.12.2008 |
ex293369 80 |
50 |
1,3,5-Tris(2,3-dibromopropyl)-1,3,5-triazinane-2,4,6-trione |
0 % |
1.1.2008-31.12.2008 |
ex293369 80 |
60 |
Hexazinone (ISO) |
0 % |
1.1.2008-31.12.2008 |
ex293369 80 |
80 |
Tris(2-hydroxyethyl)-1,3,5-triazinetrione |
0 % |
1.1.2008-31.12.2008 |
ex293379 00 |
10 |
Ezetimibe (INN) |
0 % |
1.1.2008-31.12.2008 |
(4)ex293379 00 |
30 |
5-Vinyl-2-pyrrolidone |
0 % |
1.1.2008-31.12.2012 |
ex293399 30 |
10 |
Azepane, for the manufacture of goods of subheading 3808 93 (1) |
0 % |
1.1.2008-31.12.2008 |
ex293399 30 |
20 |
5H-Dibenz[b,f]azepine-5-carbonyl chloride |
0 % |
1.1.2008-31.12.2008 |
ex293399 90 |
10 |
2-(2H-Benzotriazol-2-yl)-4,6-di-tert-butylphenol |
0 % |
1.1.2008-31.12.2008 |
ex293399 90 |
15 |
2-(2H-Benzotriazol-2-yl)-4,6-di-tert-pentylphenol |
0 % |
1.1.2008-31.12.2008 |
ex293399 90 |
20 |
2-(2H-Benzotriazol-2-yl)-4,6-bis(1-methyl-1-phenylethyl)phenol |
0 % |
1.1.2008-31.12.2008 |
ex293399 90 |
25 |
6,6’-Di-2H-benzotriazol-2-yl-4,4’-bis(1,1,3,3-tetramethylbutyl)-2,2’-methylenediphenol |
0 % |
1.1.2008-31.12.2008 |
ex293399 90 |
30 |
Quizalofop-P-ethyl (ISO) |
0 % |
1.1.2008-31.12.2008 |
ex293399 90 |
35 |
Indoline |
0 % |
1.1.2008-31.12.2008 |
ex293399 90 |
40 |
trans-4-Hydroxy-L-proline |
0 % |
1.1.2008-31.12.2008 |
ex293399 90 |
45 |
Maleic hydrazide (ISO) |
0 % |
1.1.2008-31.12.2008 |
ex293399 90 |
50 |
Metconazole (ISO) |
3,2 % |
1.1.2008-31.12.2008 |
ex293399 90 |
55 |
5-Nitroindole |
0 % |
1.1.2008-31.12.2008 |
ex293399 90 |
60 |
1,3-Bis(3-isocyanatomethylphenyl)-1,3-diazetidine-2,4-dione (dimeric 2,4-toluene diisocyanate) |
0 % |
1.1.2008-31.12.2008 |
ex293399 90 |
65 |
Candesartan cilexetil (INNM) |
0 % |
1.1.2008-31.12.2008 |
ex293399 90 |
69 |
[(3R)-4-(4-chlorobenzyl)-7-fluoro-5-(methylsulphonyl)-1,2,3,4-tetrahydrocyclopenta[b]indole-3-yl]acetic acid |
0 % |
1.1.2008-31.12.2011 |
ex293399 90 |
70 |
6,7-Dihydro-5H-cyclopenta[b]pyridine |
0 % |
1.1.2008-31.12.2008 |
ex293399 90 |
75 |
2,3-Dichloropyrazine |
0 % |
1.1.2008-31.12.2008 |
ex293399 90 |
80 |
1-Methyltetrazole-5-thiol |
0 % |
1.1.2008-31.12.2008 |
ex293399 90 |
81 |
1,2,3-Benzotriazole |
0 % |
1.1.2008-31.12.2011 |
ex293399 90 |
82 |
Tolyltriazole |
0 % |
1.1.2008-31.12.2011 |
ex293399 90 |
86 |
Pyridaben (ISO) |
0 % |
1.1.2008-31.12.2008 |
ex293399 90 |
87 |
Pyridate (ISO) |
0 % |
1.1.2008-31.12.2008 |
ex293399 90 |
88 |
2,6-Dichloroquinoxaline |
0 % |
1.1.2008-31.12.2008 |
ex293399 90 |
89 |
Carbendazim (ISO) |
0 % |
1.1.2008-31.12.2008 |
ex293410 00 |
10 |
Hexythiazox (ISO) |
0 % |
1.1.2008-31.12.2008 |
ex293410 00 |
20 |
2-(4-Methylthiazol-5-yl)ethanol |
0 % |
1.1.2008-31.12.2008 |
ex293410 00 |
30 |
5-[(2,4-Dioxo-5-thiazolidinyl)methyl]-2-methoxy-N-{[4-(trifluoromethyl)phenyl] methyl}benzamide |
0 % |
1.1.2008-31.12.2008 |
ex293420 80 |
10 |
4-Chloro-1,3-benzothiazol-2(3H)-one |
0 % |
1.1.2008-31.12.2008 |
ex293420 80 |
20 |
S-(1,3-Benzothiazol-2-yl) (Z)-2-(2-aminothiazol-4-yl)-2-(methoxyimino)thioacetate |
0 % |
1.1.2008-31.12.2008 |
ex293420 80 |
30 |
Benthiavalicarb-isopropyl (ISO) |
0 % |
1.1.2008-31.12.2008 |
ex293499 90 |
10 |
7-Chloro-5-methyl-2H-1,4-benzothiazin-3-(4H)-one |
0 % |
1.1.2008-31.12.2008 |
ex293499 90 |
15 |
Carboxin (ISO) |
0 % |
1.1.2008-31.12.2008 |
ex293499 90 |
20 |
4-[4-(Tridecyl[branched]oxy)phenyl]-1,4-thiazinane 1,1-dioxide |
0 % |
1.1.2008-31.12.2008 |
ex293499 90 |
25 |
Oxycarboxin (ISO) |
0 % |
1.1.2008-31.12.2008 |
ex293499 90 |
30 |
Etridiazole (ISO) |
0 % |
1.1.2008-31.12.2008 |
ex293499 90 |
35 |
Dimethenamide (ISO) |
0 % |
1.1.2008-31.12.2008 |
ex293499 90 |
40 |
2,3,5,6-Tetrahydroxy-1,4-diisobutyl-1,4-dioxo-1,4-diphosphinane |
0 % |
1.1.2008-31.12.2008 |
ex293499 90 |
45 |
Tris(2,3-epoxypropyl)-1,3,5-triazinanetrione |
0 % |
1.1.2008-31.12.2008 |
ex293499 90 |
50 |
1-[2-(1,3-Dioxan-2-yl)ethyl]-2-ethylpyridinium bromide |
0 % |
1.1.2008-31.12.2008 |
ex293499 90 |
55 |
Olmesartan medoxomil (INN) |
0 % |
1.1.2008-31.12.2008 |
ex293499 90 |
60 |
DL-Homocysteine thiolactone hydrochloride |
0 % |
1.1.2008-31.12.2008 |
ex293499 90 |
65 |
Methyl 3-aminothiophene-2-carboxylate |
0 % |
1.1.2008-31.12.2008 |
ex293499 90 |
72 |
1-[3-(5-Nitro-2-furyl)allylideneamino]imidazolidine-2,4-dione |
0 % |
1.1.2008-31.12.2008 |
ex293499 90 |
73 |
N-(5-Mercapto-1,3,4-thiadiazol-2-yl)acetamide |
0 % |
1.1.2008-31.12.2008 |
(4)ex293499 90 |
74 |
2-Isopropylthioxanthone |
0 % |
1.1.2008-31.12.2012 |
ex293499 90 |
75 |
(4R-cis)-1,1-Dimethylethyl-6-[2[2-(4-fluorophenyl)-5-(1-isopropyl)-3-phenyl-4-[(phenylamino)carbonyl]-1H-pyrrol-1-yl]ethyl]-2,2-dimethyl-1,3-dioxane-4-acetate |
0 % |
1.1.2008-31.12.2011 |
(4)ex293499 90 ex320420 00 |
76 10 |
2,5-Thiophenediylbis(5-tert-butyl-1,3-benzoxazole) |
0 % |
1.1.2008-31.12.2011 |
ex293499 90 |
77 |
Potassium 5-methyl-1,3,4-oxadiazole-2-carboxylate |
0 % |
1.1.2008-31.12.2011 |
(4)ex293499 90 |
78 |
1,2,4-Thiadiazole-3-acetic acid 5-[(ethoxycarbonyl)amino]- methyl ester |
0 % |
1.1.2008-31.12.2012 |
ex293499 90 |
80 |
Oblimersen sodium (INNM) |
0 % |
1.1.2008-31.12.2008 |
ex293499 90 |
85 |
Aprepitant (INN) |
0 % |
1.1.2008-31.12.2008 |
ex293500 90 |
10 |
Salts of sulfathiazole (INN) |
0 % |
1.1.2008-31.12.2008 |
ex293500 90 |
15 |
Flupyrsulfuron-methyl-sodium (ISO) |
0 % |
1.1.2008-31.12.2008 |
ex293500 90 |
20 |
Toluenesulfonamides |
0 % |
1.1.2008-31.12.2008 |
ex293500 90 |
25 |
Triflusulfuron-methyl (ISO) |
0 % |
1.1.2008-31.12.2008 |
ex293500 90 |
30 |
Mixture of isomers consisting of N-ethyltoluene-2-sulfonamide and N-ethyltoluene-4-sulfonamide |
0 % |
1.1.2008-31.12.2008 |
ex293500 90 |
35 |
Chlorsulfuron (ISO) |
0 % |
1.1.2008-31.12.2008 |
ex293500 90 |
40 |
1-(4,6-Dimethoxypyrimidin-2-yl)-3-(2-ethylsulfonylimidazo[1,2-a]pyridin-3-ylsulfonyl)urea (sulfosulfuron) |
0 % |
1.1.2008-31.12.2008 |
ex293500 90 |
45 |
Rimsulfuron (ISO) |
0 % |
1.1.2008-31.12.2008 |
ex293500 90 |
50 |
4,4’-Oxydi(benzenesulfonohydrazide) |
0 % |
1.1.2008-31.12.2008 |
ex293500 90 |
55 |
Thifensulfuron-methyl (ISO) |
0 % |
1.1.2008-31.12.2008 |
ex293500 90 |
60 |
5-Amino-N-(2,6-dichloro-m-tolyl)-1H-1,2,4-triazole-3-sulfonamide |
0 % |
1.1.2008-31.12.2008 |
ex293500 90 |
65 |
Tribenuron-methyl (ISO) |
0 % |
1.1.2008-31.12.2008 |
ex293500 90 |
70 |
Methyl 3-aminosulfonylthiophene-2-carboxylate |
0 % |
1.1.2008-31.12.2008 |
ex293500 90 |
75 |
Metsulfuron-methyl (ISO) |
0 % |
1.1.2008-31.12.2008 |
ex293500 90 |
76 |
4-Toluenesulphonyl urea |
0 % |
1.1.2008-31.12.2011 |
ex293500 90 |
80 |
N-(3-Amino-2-hydroxy-4-phenylbutyl)-N-(2-methylpropyl)-4-aminobenzenesulfonamide |
0 % |
1.1.2008-31.12.2008 |
ex293500 90 |
81 |
4-Amino-N-(4-aminophenyl)benzenesulphonamide |
0 % |
1.1.2008-31.12.2008 |
ex293500 90 |
82 |
N-(5,7-Dimethoxy[1,2,4]triazolo[1,5-a]pyrimidin-2-yl)-2-methoxy-4-(trifluoromethyl)pyridine-3-sulphonamide |
0 % |
1.1.2008-31.12.2008 |
ex293500 90 |
85 |
N-[4-(Isopropylaminoacetyl)phenyl]methanesulfonamide hydrochloride |
0 % |
1.1.2008-31.12.2008 |
ex293500 90 |
86 |
4-(m-Tolylamino)pyridine-3-sulfonamide |
0 % |
1.1.2008-31.12.2008 |
ex293500 90 |
87 |
4’-Sulfamoylacetanilide |
0 % |
1.1.2008-31.12.2008 |
ex293500 90 |
88 |
N-(2-(4-Amino-N-ethyl-m-toluidino)ethyl)methanesulfonamide sesquisulfate monohydrate |
0 % |
1.1.2008-31.12.2008 |
ex293500 90 |
89 |
3-(3-Bromo-6-fluoro-2-methylindol-1-ylsulphonyl)-N,N-dimethyl-1,2,4-triazol-1-sulphonamide |
0 % |
1.1.2008-31.12.2011 |
ex293890 90 |
10 |
Hesperidin |
0 % |
1.1.2008-31.12.2008 |
3201 20 00 |
Wattle extract |
0 % |
1.1.2008-31.12.2008 |
|
ex320190 90 |
10 |
Tanning extracts of eucalyptus |
3,2 % |
1.1.2008-31.12.2008 |
ex320190 90 |
20 |
Tanning extracts derived from gambier and myrobalan fruits |
0 % |
1.1.2008-31.12.2008 |
ex320413 00 |
10 |
C.I. Basic Red 1 dye |
0 % |
1.1.2008-31.12.2011 |
(4)ex320415 00 |
10 |
Dye C.I. Vat Orange 7 (C.I. Pigment Orange 43) |
0 % |
1.1.2008-31.12.2012 |
ex320415 00 |
20 |
Dye C.I. Vat Red 15 |
0 % |
1.1.2008-31.12.2008 |
ex320415 00 |
30 |
Dye C.I. Vat Red 14 |
0 % |
1.1.2008-31.12.2008 |
ex320415 00 |
40 |
Dye C.I. Vat Brown 57 |
0 % |
1.1.2008-31.12.2008 |
ex320415 00 |
50 |
Dye C.I. Vat Blue 47 |
0 % |
1.1.2008-31.12.2008 |
ex320415 00 |
60 |
Dyestuff C.I. Vat Blue 4 |
0 % |
1.1.2008-31.12.2008 |
ex320417 00 |
10 |
Dye C.I. Pigment Yellow 81 |
0 % |
1.1.2008-31.12.2008 |
(4)ex320417 00 |
30 |
Dye C.I. Pigment Yellow 97 |
0 % |
1.1.2008-31.12.2012 |
ex320419 00 |
10 |
Nickel bis{4-methoxy-2-[6-(pentafluoroethylthio)benzothiazol-2-ylazo]-5-(dipropylamino)benzenesulfonate} |
0 % |
1.1.2008-31.12.2008 |
ex320419 00 |
15 |
4-{4-[3-(4-Methoxyphenyl)-13,13-dimethyl-3,13-dihydrobenzo [h]indeno[2,1-f]chromen-3-yl]phenyl}morpholine |
0 % |
1.1.2008-31.12.2008 |
ex320419 00 |
20 |
13-Ethyl-3-[4-(morpholino)phenyl]-3-phenyl-3,13-dihydrobenzo [h]indeno[2,1-f]chromen-13-ol |
0 % |
1.1.2008-31.12.2008 |
ex320419 00 |
25 |
Cyclohexyl 8-methyl-2,2-diphenyl-2H-benzo[h]chromene-5-carboxylate |
0 % |
1.1.2008-31.12.2008 |
ex320419 00 |
30 |
13-Isopropyl-3,3-bis(4-methoxyphenyl)-6,11-dimethyl-3,13-dihydrobenzo [h]indeno[2,1-f]chromen-13-ol |
0 % |
1.1.2008-31.12.2008 |
ex320419 00 |
35 |
13-Butyl-13-ethoxy-6,11-dimethoxy-3,3-bis(4-methoxyphenyl)-3,13-dihydrobenzo [h]indeno[2,1-f]chromene |
0 % |
1.1.2008-31.12.2008 |
ex320419 00 |
40 |
Methyl 8’-acetoxy-1,3,3,5,6-pentamethyl-2,3-dihydrospiro[1H-indole-2,3’-naphtho[2,1-b][1,4]oxazine]-9’-carboxylate |
0 % |
1.1.2008-31.12.2008 |
ex320419 00 |
45 |
6,7-Dimethoxy-3,3-bis(4-methoxyphenyl)-13,13-dimethyl-3,13-dihydrobenzo [h]indeno[2,1-f]chromene |
0 % |
1.1.2008-31.12.2008 |
ex320419 00 |
50 |
Methyl 6-(isobutyryloxy)-2,2-diphenyl-2H-benzo[h]chromene-5-carboxylate |
0 % |
1.1.2008-31.12.2008 |
ex320419 00 |
60 |
Ethoxycarbonylmethyl 8-methyl-2,2-diphenyl-2H-benzo[h]chromene-5-carboxylate |
0 % |
1.1.2008-31.12.2008 |
ex320419 00 |
65 |
6-Methoxy-7-morpholino-13-ethyl-13-methoxy-3,3-bis-(4-methoxyphenyl)-3,13-dihydrobenzo[h]indeno[2,1-f]chromene |
0 % |
1.1.2008-31.12.2008 |
ex320419 00 |
70 |
Dye C.I. Solvent Red 49 |
0 % |
1.1.2008-31.12.2008 |
ex320419 00 |
75 |
6,7-Dimethoxy-13-ethyl-13-methoxy-3,3-bis-(4-methoxyphenyl)-3,13-dihydrobenzo[h]indeno[2,1-f]chromene |
0 % |
1.1.2008-31.12.2008 |
ex320419 00 |
80 |
((R) and (S) isomers of 6,7-Dimethoxy-13-ethyl-13-[2-(2-methoxyethoxy)-ethoxy]-3-(4-methoxyphenyl)-3-(4-fluorophenyl)-3,13-dihydrobenzo[h]indeno[2,1-f]chromene |
0 % |
1.1.2008-31.12.2008 |
ex320419 00 |
81 |
6,11-Difluoro-3,3-di-(4-methoxyphenyl)-13,13-dimethyl-3,13-dihydrobenzo[h]indeno[2,1-f]chromene |
0 % |
1.1.2008-31.12.2008 |
ex320419 00 |
82 |
3-(4-Fluorophenyl)-3-(4-piperidinophenyl)-13,13-dimethyl-3,13-dihydrobenzo[h]indeno[2,1-f]chromene |
0 % |
1.1.2008-31.12.2008 |
ex320419 00 |
83 |
6,7-Dimethoxy-11-cyano-3,3-di-(4-methoxyphenyl)-13,13-dimethyl-3,13-dihydrobenzo[h]indeno[2,1-f]chromene |
0 % |
1.1.2008-31.12.2008 |
ex320500 00 |
10 |
Aluminium lakes prepared from dyes for use in the manufacture of pigments for the pharmaceutical industry (1) |
0 % |
1.1.2008-31.12.2008 |
ex320611 00 |
10 |
Titanium dioxide coated with isopropoxytitanium triisostearate, containing by weight 1,5 % or more but not more than 2,5 % of isopropoxytitanium triisostearate |
0 % |
1.1.2008-31.12.2008 |
ex320619 00 |
10 |
Preparation based on titanium dioxide, containing by weight 66 % or more but not more than 71 % of titanium dioxide and 1 % or more but not more than 2 % of isopropoxytitanium triisostearate |
0 % |
1.1.2008-31.12.2008 |
ex320642 00 |
10 |
Lithopone |
0 % |
1.1.2008-31.12.2008 |
ex320649 80 |
10 |
Black preparation of iron-oxide pigments, in liquid form, with a maximum particle size not exceeding 20 nanometres and containing by weight 25 % or more of iron evaluated as Fe2O3, for the manufacture of goods of heading No 3304 or 9608 (1) |
0 % |
1.1.2008-31.12.2008 |
3206 50 00 |
Inorganic products of a kind used as luminophores |
0 % |
1.1.2008-31.12.2008 |
|
ex320730 00 |
10 |
Preparation containing: — not more than 85 % by weight of silver, — not less than 2 % by weight of palladium, — barium titanate, — terpineol, and — ethyl cellulose, used for screen printing in the manufacture of multilayer ceramic capacitors (1) |
0 % |
1.1.2008-31.12.2008 |
ex320740 80 |
20 |
Glass flakes coated with silver, of an average diameter of 40 (±10) μm |
0 % |
1.1.2008-31.12.2008 |
ex320740 80 |
30 |
Glass frit, for use in the manufacture of cathode-ray tubes (1) |
0 % |
1.1.2008-31.12.2008 |
ex320810 90 ex370790 90 |
10 60 |
Anti-reflection coating, consisting of an ester based polymer modified with a chromophore group, in the form of a solution of either 2-methoxy-1-propanol, 2-methoxy-1-methylethyl acetate or methyl-2-hydroxyisobutyrate, containing by weight not more than 10 % of polymer |
0 % |
1.1.2008-31.12.2008 |
ex320820 10 |
10 |
Copolymer of N-vinylcaprolactam, N-vinyl-2-pyrrolidone and dimethylaminoethyl methacrylate, in the form of a solution in ethanol containing by weight 34 % or more but not more than 40 % of copolymer |
0 % |
1.1.2008-31.12.2008 |
ex320820 10 ex390591 00 |
20 92 |
Copolymer of vinylpyrrolidone and dimethylaminoethyl methacrylate, partially quaternized by diethyl sulfate, in the form of a solution in ethanol |
0 % |
1.1.2008-31.12.2008 |
ex320820 10 |
30 |
Solution of diundecyl phthalate and a copolymer of dibutyl maleate and isobutyl methacrylate in a hydrocarbon solvent |
0 % |
1.1.2008-31.12.2008 |
ex320820 10 |
40 |
Poly(1H,1H-heptafluorobutyl methacrylate) dissolved in a mixture of methyl perfluorobutyl ether and methyl perfluoroisobutyl ether |
0 % |
1.1.2008-31.12.2011 |
ex320890 19 ex391190 99 |
10 35 |
Copolymer of maleic acid and methyl vinyl ether, monoesterified with ethyl and/or isopropyl and/or butyl groups, in the form of a solution in ethanol, ethanol and butanol, isopropanol or isopropanol and butanol |
0 % |
1.1.2008-31.12.2008 |
ex320890 19 ex390290 90 |
15 94 |
Modified, chlorinated polyolefins, whether or not in a solution or dispersion |
0 % |
1.1.2008-31.12.2008 |
ex320890 19 |
20 |
Copolymer of polyurethane and silicone, in the form of a solution in a mixture of butanone, toluene and cyclohexanone, containing by weight 13 % or more but not more than 16 % of copolymer |
0 % |
1.1.2008-31.12.2008 |
ex320890 19 |
30 |
Solution containing: — (30 ± 5) % by weight of polyamide resin, — (6,5 ± 3,5) % by weight of diazonaphthoquinone, — (55 ± 5) % by weight of 1-methyl-2-pyrrolidone, — 1 000 μg/kg or less of chloride, — 1 000 μg/kg or less of potassium and — 1 000 μg/kg or less of iron |
0 % |
1.1.2008-31.12.2008 |
ex320890 19 |
40 |
Polymer of methylsiloxane, in the form of a solution in a mixture of acetone, butanol, ethanol and isopropanol, containing by weight 5 % or more but not more than 11 % of polymer of methylsiloxane |
0 % |
1.1.2008-31.12.2008 |
ex320890 19 |
50 |
Solution containing by weight: — (65 ± 10) % of γ-butyrolactone, — (30 ± 10) % of polyamide resin, — (3,5 ± 1,5) % of naphthoquinone ester derivative and — (1,5 ± 0,5) % of arylsilicic acid |
0 % |
1.1.2008-31.12.2008 |
ex320890 19 |
60 |
Copolymer of hydroxystyrene and either styrene or alkoxystyrene or both, dissolved in ethyl lactate |
0 % |
1.1.2008-31.12.2011 |
(4)ex320890 19 |
75 |
Acenaphthalene copolymer in ethyl lactate solution |
0 % |
1.1.2008-31.12.2012 |
ex320890 19 |
85 |
Mixture containing by weight: — 30~45 % Polyamide resin; — 2~10 % Diazonaphthoquinone; — 50~65 % γ-Butyrolactone. |
0 % |
1.1.2008-31.12.2008 |
(4)ex320890 91 |
10 |
Preparation on the basis of polyhydroxyamide containing at least naphtoquinone ester derivate or tosylate dissolved in γ-butyrolactone and/or 2-methoxy-1-methylethyl acetate |
0 % |
1.1.2008-31.12.2012 |
ex320890 99 |
10 |
Solution based on chemically modified natural polymers, containing two or more of the following dyes: — methyl 8’-acetoxy-1,3,3,5,6-pentamethyl-2,3-dihydrospiro[1H-indole-2,3’-naphtho[2,1-b][1,4]oxazine]-9’-carboxylate, — methyl 6-(isobutyryloxy)-2,2-diphenyl-2H-benzo[h]chromene-5-carboxylate, — 13-isopropyl-3,3-bis(4-methoxyphenyl)-6,11-dimethyl-3,13-dihydrobenzo[h]indeno[2,1-f]chromen-13-ol, — ethoxycarbonylmethyl 8-methyl-2,2-diphenyl-2H-benzo[h]chromene-5-carboxylate, — 13-ethyl-3-[4-(morpholino)phenyl]-3-phenyl-3,13-dihydrobenzo[h]indeno[2,1-f]chromen-13-ol |
0 % |
1.1.2008-31.12.2008 |
ex320890 99 |
20 |
Solution based on chemically modified natural polymers, containing two or more of the following dyes: — 4-[4-(13,13-dimethyl-3-phenyl-3,13-dihydrobenzo [h]indeno[2,1-f]chromen-3-yl)phenyl]morpholine, — 4-{4-[3-(4-methoxyphenyl)-13,13-dimethyl-3,13-dihydrobenzo [h]indeno[2,1-f]chromen-3-yl]phenyl}morpholine, — cyclohexyl 8-methyl-2,2-diphenyl-2H-benzo[h]chromene-5-carboxylate, — ethoxycarbonylmethyl 6-acetoxy-2,2-diphenyl-2H-benzo[h]chromene-5-carboxylate, — 2-pentyl-7,7-diphenylbenzo[h]chromeno[6,5-d]-1,3-dioxin-4(7H)-one, — 13-butyl-13-ethoxy-6,11-dimethoxy-3,3-bis(4-methoxyphenyl)-3,13-dihydrobenzo [h]indeno[2,1-f]chromene, — 3-(4-methoxyphenyl)-13,13-dimethyl-3-phenyl-3,13-dihydrobenzo [h]indeno[2,1-f]chromene, — 6,7-dimethoxy-3,3-bis(4-methoxyphenyl)-13,13-dimethyl-3,13-dihydrobenzo [h]indeno[2,1-f]chromene |
0 % |
1.1.2008-31.12.2008 |
ex321511 00 ex321519 00 |
10 10 |
Printing ink, liquid, consisting of a dispersion of a vinyl acrylate copolymer and colour pigments in isoparaffins, containing by weight not more than 13 % of vinyl acrylate copolymer and colour pigments |
0 % |
1.1.2008-31.12.2008 |
ex321590 80 |
10 |
Ink formulation, for use in the manufacture of ink-jet cartridges (1) |
0 % |
1.1.2008-31.12.2008 |
ex321590 80 |
20 |
Heat sensitive ink fixed on a plastic film |
0 % |
1.1.2008-31.12.2008 |
ex321590 80 |
30 |
Ink preparation, in the form of powder, for use in the manufacture of ink-filled bottles of a kind used in colour digital presses of heading No 8443 (1) |
0 % |
1.1.2008-31.12.2008 |
3301 12 10 |
Essential oil of orange, not deterpenated |
0 % |
1.1.2008-31.12.2008 |
|
ex340213 00 |
10 |
Vinyl copolymer surface active agent based on polypropylene glycol |
0 % |
1.1.2008-31.12.2008 |
(4)ex340213 00 |
20 |
Surfactant containing 1,4-dimethyl-1,4-bis(2-methylpropyl)-2-butyne-1,4-diyl ether, polymerized with oxirane, methyl terminated |
0 % |
1.1.2008-31.12.2012 |
ex340290 10 |
20 |
Mixture of docusate sodium (INN) and sodium benzoate |
0 % |
1.1.2008-31.12.2008 |
ex340290 10 |
30 |
Non-aqueous surface-active preparation, containing: — polyethylene glycol alkylphenyl ether, — 2,4,7,9-tetramethyldec-5-yne-4,7-diol and — phosphoric acid esters |
0 % |
1.1.2008-31.12.2008 |
ex340290 10 |
40 |
Amphoteric fluorinated surfactant in a mixture of water and ethanol, containing by weight 25 % or more but not more than 30 % surfactant |
0 % |
1.1.2008-31.12.2008 |
(4)ex340290 10 |
50 |
Surfactant mixture, of disodium salts of dodecyl (sulphophenoxy)benzenesulphonic acid and oxybis (dodecylbenzenesulphonic acid) |
0 % |
1.1.2008-31.12.2008 |
ex340290 90 |
10 |
Crystalline powder obtained by the reaction of trisodium phosphate with a mixture of sodium hypochlorite and sodium chloride (‘chlorinated trisodium phosphate’), containing by weight: — 3,5 % or more of available chlorine, measured iodometrically and — 17,0 % or more of phosphorus evaluated as P2O5 |
0 % |
1.1.2008-31.12.2008 |
ex340399 90 |
10 |
Cutting-fluid preparation based on an aqueous solution of synthetic polypeptides |
0 % |
1.1.2008-31.12.2008 |
ex350400 00 |
10 |
Purified antigens obtained from genetically manipulated yeast cells, for the manufacture of detection tests for hepatitis-C (1) |
0 % |
1.1.2008-31.12.2008 |
ex350400 00 |
20 |
Glycoprotein 160 obtained from Human Immunodeficiency Virus, HIV-1 strain |
0 % |
1.1.2008-31.12.2008 |
ex350510 50 |
20 |
O-(2-Hydroxyethyl)-derivative of hydrolysed maize starch |
0 % |
1.1.2008-31.12.2008 |
ex350610 00 |
11 |
Cartridge containing an adhesive based on a mixture of silicon modified polymer and aluminium hydroxide for use in the manufacture of deflection yokes (1) |
0 % |
1.1.2008-31.12.2008 |
ex350691 00 |
10 |
Adhesive based on an aqueous dispersion of a mixture of dimerised rosin and a copolymer of ethylene and vinyl acetate (EVA) |
0 % |
1.1.2008-31.12.2008 |
ex350691 00 |
20 |
Heat-activated adhesive based on phenolic resin and rubber, in the form of a film on a release paper, for use in the manufacture of brake pads for the automotive industry (1) |
0 % |
1.1.2008-31.12.2008 |
ex350691 00 |
30 |
Two component microencapsulated epoxy adhesive dispersed in a solvent |
0 % |
1.1.2008-31.12.2008 |
(4)ex350691 00 |
40 |
Acrylic pressure sensitive adhesive with a thickness of 0,076 mm or more but not exceeding 0,127 mm, put up in rolls of a width of 45,7 cm or more but not exceeding 78,5 cm supplied on a release liner with an initial peel adhesion release value of not less than 15N/25 mm (measured according to ASTM D 3330) |
0 % |
1.1.2008-31.12.2012 |
ex350790 90 |
10 |
Asparaginase |
0 % |
1.1.2008-31.12.2008 |
ex350790 90 |
20 |
Enzymatic preparation based on thermolysine |
0 % |
1.1.2008-31.12.2008 |
ex350790 90 |
40 |
Avian myeloblastosis virus (AMV) reverse transcriptase |
0 % |
1.1.2008-31.12.2008 |
ex350790 90 |
60 |
Trypsin certified to be produced in compliance with EC Good Manufacturing Practice (cGMP) and having a specific enzyme activity of 0,45 μkat/mg or more, for the manufacture of goods of heading No 3004 (1) |
0 % |
1.1.2008-31.12.2008 |
ex350790 90 |
70 |
Chymotrypsin |
0 % |
1.1.2008-31.12.2008 |
ex370130 00 |
10 |
Relief printing plate, of a kind used for printing on newsprint, consisting of a metal substrate coated with a photopolymer layer of a thickness of 0,2 mm or more but not exceeding 0,8 mm, not covered with a release film, of a total thickness not exceeding 1 mm |
0 % |
1.1.2008-31.12.2008 |
ex370199 00 |
10 |
Plate of quartz or of glass, covered with a film of chromium and coated with a photosensitive or electron-sensitive resin, for the manufacture of masks for the goods of heading No 8541 or 8542 (1) |
0 % |
1.1.2008-31.12.2008 |
ex370231 98 |
10 |
Colour negative film, for the manufacture of instant-picture film-packs (1) |
0 % |
1.1.2008-31.12.2008 |
ex370243 00 ex370244 00 |
10 10 |
Photographic film, of a nominal width of 459, 669 or 761 mm, composed of several layers, including two polyester films, a carbon layer, an adhesive layer, whether or not with a layer of a copolymer of styrene with acrylonitrile |
0 % |
1.1.2008-31.12.2008 |
ex370390 10 |
10 |
Paper sheet, coated with silver halide emulsion, for the manufacture of goods of subheading 3701 20 00 (1) |
0 % |
1.1.2008-31.12.2008 |
ex370710 00 |
10 |
Photosensitive emulsion for the sensitization of silicon discs (1) |
0 % |
1.1.2008-31.12.2008 |
ex370710 00 |
15 |
Sensitising emulsion, consisting of diazooxonaphtalenesulphonic acid ester and phenolic resins, containing by weight not more than 12 % of diazooxonaphtalenesulfonic acid ester, in 2-methoxy-1-methylethyl acetate or ethyl lactate |
0 % |
1.1.2008-31.12.2008 |
ex370710 00 |
25 |
Sensitising emulsion containing: — phenolic or acrylic resins — a maximum 2 % by weight of light sensitive acid precursor, in a solution containing 2-methoxy-1-methylethyl acetate or ethyl lactate |
0 % |
1.1.2008-31.12.2008 |
ex370710 00 |
30 |
Preparation based on photosensitive acrylic containing polymer, containing colour pigments, 2-methoxy-1-methylethylacetate and cyclohexanone and whether or not containing ethyl-3-ethoxypropionate |
0 % |
1.1.2008-31.12.2008 |
ex370710 00 |
35 |
Sensitising emulsion, consisting of acrylate and/or methacrylate polymers, containing by weight not more than 7 % photosensitive acid precursors dissolved in an organic solvent containing at least 2-methoxy-1-methylethyl acetate |
0 % |
1.1.2008-31.12.2011 |
ex370710 00 |
40 |
Sensitising emulsion, containing: — not more than 10 % by weight of naphthoquinonediazide esters, — 2 % or more but not more than 20 % by weight of copolymers of hydroxystyrene — not more than 7 % by weight of epoxy-containing derivatives dissolved in 1-ethoxy-2-propyl acetate and/or ethyl lactate |
0 % |
1.1.2008-31.12.2011 |
ex370790 30 |
10 |
Toner, in the form of powder, consisting of a copolymer of styrene and butyl acrylate and either magnetite or carbon black, for use as a developer in the manufacture of cartridges for facsimile machines or computer printers (1) |
0 % |
1.1.2008-31.12.2008 |
ex370790 30 |
20 |
Toner, based on a polyol resin, in the form of powder |
0 % |
1.1.2008-31.12.2008 |
ex370790 30 |
30 |
Two-component toner, liquid, in the form of a set consisting of a container containing a dispersion of a vinyl acrylate copolymer and colour pigments in isoparaffins, containing by weight not more than 13 % of vinyl acrylate copolymer and colour pigments, and a container containing isoparaffins |
0 % |
1.1.2008-31.12.2008 |
ex370790 30 |
40 |
Polyester resin based toner, manufactured by a polymerisation process, for use as a developer in the manufacture of computer printer and copier cartridges (1) |
0 % |
1.1.2008-31.12.2008 |
ex370790 90 |
10 |
Anti-reflection coating, consisting of a modified methacrylic polymer, containing by weight not more than 10 % of polymer, in the form of a solution in 2-methoxy-1-methylethyl acetate and 1-methoxypropan-2-ol |
0 % |
1.1.2008-31.12.2008 |
ex370790 90 |
20 |
Anti-reflection coating, consisting of a copolymer of hydroxystyrene and methyl methacrylate, modified with chromophore groups, containing by weight not more than 10 % of polymer, in the form of a solution in 1-methoxypropan-2-ol and ethyl lactate |
0 % |
1.1.2008-31.12.2008 |
(4)ex370790 90 ex382490 97 |
30 91 |
Anti-reflection coating, in the form of an aqueous solution, containing by weight: — not more than 2 % of perhalogenated sulfonic acid derivatives, — not more than 1 % of a vinyl polymer |
0 % |
1.1.2008-31.12.2008 |
ex370790 90 |
40 |
Anti-reflection coating, consisting of amino-resin and modified phenolic resin, in the form of a solution in 1-methoxypropan-2-ol and ethyl lactate, containing by weight 15 % or more but not more than 24 % of both polymers taken together |
0 % |
1.1.2008-31.12.2008 |
ex370790 90 |
50 |
Anti-reflection coating, containing by weight: — 30 % or more but not more than 40 % of cyclohexanone, — 30 % or more but not more than 40 % of 1-methyl-2-pyrrolidone, — 20 % or more but not more than 30 % of tetrahydrofurfuryl alcohol |
0 % |
1.1.2008-31.12.2008 |
ex380120 90 |
10 |
Colloidal graphite in suspension in water, for use as internal coating in colour cathode-ray tubes (1) |
0 % |
1.1.2008-31.12.2008 |
3805 90 10 |
Pine oil |
1,7 % |
1.1.2008-31.12.2008 |
|
ex380891 90 |
10 |
Indoxacarb (ISO) and its (R) isomer, fixed on a support of silicon dioxide |
0 % |
1.1.2008-31.12.2008 |
ex380891 90 |
20 |
Preparation containing by weight 2 % or more but not more than 4 % of azadirachtin (ISO), not put up for retail sale |
0 % |
1.1.2008-31.12.2008 |
ex380891 90 |
30 |
Preparation containing endospores and protein crystals derived from the hybrid strain GC 91 of Bacillus thuringiensis Berliner subsp. aizawai and kurstaki |
0 % |
1.1.2008-31.12.2008 |
ex380891 90 |
40 |
Spinosad (ISO) |
0 % |
1.1.2008-31.12.2008 |
ex380892 90 |
10 |
Fungicide in the form of a powder, containing by weight 65 % or more but not more than 75 % of hymexazole (ISO), not put up for retail sale |
0 % |
1.1.2008-31.12.2008 |
ex380892 90 |
20 |
Preparation based on diiodomethyl p-tolyl sulfone, not put up for retail sale |
0 % |
1.1.2008-31.12.2008 |
ex380892 90 |
30 |
Preparation consisting of a suspension of pyrithione zinc (INN) in water, containing by weight 24 % or more but not more than 26 % of pyrithione zinc (INN) |
0 % |
1.1.2008-31.12.2008 |
(4)ex380893 27 |
20 |
Organic solution of Clethodim (ISO), with a Clethodim content of 37 % (±2 %) or 70 % (±2 %) by weight |
0 % |
1.1.2008-31.12.2012 |
ex380894 20 |
10 |
Preparation containing by weight: — 58 % or more but not more than 62 % of 1-bromo-3-chloro-5,5-dimethylhydantoin, — 26 % or more but not more than 29 % of 1,3-dichloro-5,5-dimethylhydantoin, — 10 % or more but not more than 12 % of 1,3-dichloro-5-ethyl-5-methylhydantoin, for the manufacture of swimming-pool disinfectants (1) |
0 % |
1.1.2008-31.12.2008 |
ex380894 90 |
10 |
1-Dodecylguanidine hydrochloride, in the form of a solution in isopropanol and water, containing by weight 40 % or less of 1-dodecylguanidine hydrochloride |
0 % |
1.1.2008-31.12.2008 |
ex380991 00 |
10 |
Mixture of 5-ethyl-2-methyl-2-oxo-1,3,2λ 5-dioxaphosphoran-5-ylmethyl methyl methylphosphonate and bis(5-ethyl-2-methyl-2-oxo-1,3,2λ 5-dioxaphosphoran-5-ylmethyl) methylphosphonate |
0 % |
1.1.2008-31.12.2008 |
ex380992 00 |
10 |
Paper anti-fading agent, consisting of a mixture of magnesium trisilicate and monosodium salt of 2,2’-methylenebis(4,6-di-tert-butylphenyl) phosphate |
0 % |
1.1.2008-31.12.2008 |
ex381121 00 |
10 |
Salts of dinonylnaphthalenesulfonic acid, in the form of a solution in mineral oils |
0 % |
1.1.2008-31.12.2008 |
ex381121 00 |
20 |
Additives for lubricating oils, based on complex organic molybdenum compounds, in the form of a solution in mineral oil |
0 % |
1.1.2008-31.12.2008 |
ex381190 00 |
10 |
Dinonylnaphthylsulphonic acid salt, in a mineral oil solution |
0 % |
1.1.2008-31.12.2008 |
ex381190 00 |
20 |
Corrosion inhibitor, containing reaction products of fatty acids and tall oil with formaldehyde and (Z)-N-9-octadecenyl-1,3-propanediamine |
0 % |
1.1.2008-31.12.2011 |
ex381230 80 |
20 |
Mixture containing predominantly bis(2,2,6,6-tetramethyl-1-octyloxy-4-piperidyl) sebacate |
0 % |
1.1.2008-31.12.2008 |
ex381230 80 |
30 |
Compound stabilisers containing by weight 15 % or more but not more than 40 % of sodium perchlorate and not more than 70 % of 2-(2-methoxyethoxy)ethanol |
0 % |
1.1.2008-31.12.2008 |
ex381400 90 |
10 |
Mixture containing by weight 25 % or more but not more than 35 % of dimethyl sulfoxide and 65 % or more but not more than 75 % of monoethanolamine |
3 % |
1.1.2008-31.12.2008 |
ex381400 90 |
20 |
Mixture containing by weight: — 69 % or more but not more than 71 % of 1-methoxypropan-2-ol, — 29 % or more but not more than 31 % of 2-methoxy-1-methylethyl acetate |
0 % |
1.1.2008-31.12.2008 |
ex381400 90 |
30 |
Azeotrope mixture containing by weight 30 % or more but not more than 50 % of trans-dichloroethylene and a mixture of isomers of nonafluorobutyl methyl ether or nonafluorobutyl ethyl ether |
0 % |
1.1.2008-31.12.2008 |
ex381400 90 |
40 |
Azeotrope mixtures containing isomers of nonafluorobutyl methyl ether and/or nonafluorobutyl ethyl ether |
0 % |
1.1.2008-31.12.2008 |
ex381512 00 |
10 |
Catalyst, in the form of granules or rings of a diameter of 3 mm or more but not exceeding 10 mm, consisting of silver on an aluminium oxide support and containing by weight 8 % or more but not more than 40 % of silver |
0 % |
1.1.2008-31.12.2008 |
ex381512 00 |
20 |
Catalyst, consisting of palladium and rhenium, fixed on a support of active carbon, in the form of powder, containing: — 0,5 % or more but not more than 1,5 % by weight of palladium, — 3 % or more but not more than 5 % by weight of rhenium and — 0,1 mole % or more but not more than 1 mole % of alkaline metals, for use in the manufacture of tetrahydrofuran (1) |
0 % |
1.1.2008-31.12.2008 |
ex381512 00 |
30 |
Catalyst, consisting of platinum and palladium fixed on a support, containing by weight: — not more than 1,5 % of platinum, — not more than 1,5 % of palladium and — not more than 0,1 % of alkali metals, for use in hydrogenation of white oils (1) |
0 % |
1.1.2008-31.12.2008 |
ex381519 90 |
10 |
Catalyst, consisting of chromium trioxide or dichromium trioxide fixed on a support of silicon dioxide, of a pore volume, as determined by the nitrogen absorption method, of 2 cm3/g or more |
0 % |
1.1.2008-31.12.2008 |
ex381519 90 |
15 |
Catalyst, in the form of a powder, consisting of a mixture of metal oxides fixed on a support of silicon dioxide, containing by weight 20 % or more but not more than 40 % of molybdenum, bismuth and iron evaluated together, for use in the manufacture of acrylonitrile (1) |
0 % |
1.1.2008-31.12.2008 |
ex381519 90 |
20 |
Catalyst consisting of chromium oxides and titanium dioxide fixed on a support of silicon dioxide, aluminium oxide or aluminium phosphate |
0 % |
1.1.2008-31.12.2008 |
ex381519 90 |
30 |
Catalyst containing titanium tetrachloride supported on magnesium dichloride, for use in the manufacture of polypropylene (1) |
0 % |
1.1.2008-31.12.2008 |
ex381519 90 |
35 |
Catalyst, in the form of rodlets of a length of 5,5 mm or more but not exceeding 6,5 mm, consisting of copper oxide and zinc oxide fixed on a support of aluminium oxide, containing by weight: — 55 % or more but not more than 60 % of copper oxide and — 30 % or more but not more than 35 % of zinc oxide |
0 % |
1.1.2008-31.12.2008 |
ex381519 90 |
40 |
Catalyst, in the form of spheres of a diameter of 4,2 mm or more but not exceeding 9 mm, consisting of a mixture of metals oxides containing predominantly oxides of molybdenum, vanadium and copper, on a support of silicon dioxide and/or aluminium oxide, for use in the manufacture of acrylic acid (1) |
0 % |
1.1.2008-31.12.2008 |
ex381519 90 |
45 |
Catalyst, consisting predominantly of dichromium copper tetraoxide and copper (II) oxide, containing by weight 38 % or more but not more than 48 % of copper, evaluated as copper (II) oxide, fixed on a support of silicon dioxide, for the hydrogenation of acetophenones (1) |
0 % |
1.1.2008-31.12.2008 |
ex381519 90 |
50 |
Catalyst consisting of organo-metallic compounds of titanium, magnesium and aluminium on a support of silicon dioxide, in the form of a suspension in tetrahydrofuran |
0 % |
1.1.2008-31.12.2008 |
ex381519 90 |
55 |
Catalyst consisting of a mixture of metal oxides containing chromium trioxide, fixed on a support of silicon dioxide |
0 % |
1.1.2008-31.12.2008 |
ex381519 90 |
60 |
Catalyst consisting of dichromium trioxide, fixed on a support of aluminium oxide |
0 % |
1.1.2008-31.12.2008 |
ex381519 90 |
65 |
Catalyst consisting of phosphoric acid chemically bonded to a support of silicon dioxide |
0 % |
1.1.2008-31.12.2008 |
ex381519 90 |
70 |
Catalyst consisting of organo-metallic compounds of aluminium and zirconium, fixed on a support of silicon dioxide |
0 % |
1.1.2008-31.12.2008 |
ex381519 90 |
75 |
Catalyst consisting of organo-metallic compounds of aluminium and chromium, fixed on a support of silicon dioxide |
0 % |
1.1.2008-31.12.2008 |
ex381519 90 |
80 |
Catalyst consisting of organo-metallic compounds of magnesium and titanium, fixed on a support of silicon dioxide, in the form of a suspension in mineral oil |
0 % |
1.1.2008-31.12.2008 |
ex381519 90 |
85 |
Catalyst consisting of organo-metallic compounds of aluminium, magnesium and titanium, fixed on a support of silicon dioxide, in the form of powder |
0 % |
1.1.2008-31.12.2008 |
ex381519 90 |
86 |
Catalyst containing titanium tetrachloride supported on magnesium dichloride, for use in the manufacture of polyolefins (1) |
0 % |
1.1.2008-31.12.2008 |
ex381590 90 |
15 |
Catalyst, consisting of a mixture of oxides containing by weight more than 96 % of oxides of molybdenum, vanadium, nickel and antimony, whether or not mixed with porcelain balls, for use in the manufacture of acrylic acid (1) |
0 % |
1.1.2008-31.12.2008 |
(4)ex381590 90 |
16 |
Initiator based on dimethylaminopropyl urea |
0 % |
1.1.2008-31.12.2012 |
ex381590 90 |
20 |
Catalyst, in powder form, consisting of a mixture of titanium trichloride and aluminium chloride, containing by weight: — 20 % or more but not more than 30 % of titanium and — 55 % or more but not more than 72 % of chlorine |
0 % |
1.1.2008-31.12.2008 |
ex381590 90 |
25 |
Catalyst, consisting of a mixture of oxides containing by weight more than 96 % of oxides of molybdenum, bismuth, nickel, iron and silicon, whether or not mixed with porcelain balls, for use in the manufacture of acrylaldehyde (1) |
0 % |
1.1.2008-31.12.2008 |
ex381590 90 |
30 |
Catalyst, in the form of a powder, containing by weight 82 % or more of copper and of a specific surface of 0,5 m2/g or more but not exceeding 8 m2/g |
0 % |
1.1.2008-31.12.2008 |
ex381590 90 |
35 |
Catalyst, in the form of a suspension in oil, consisting of titanium trichloride and aluminium trichloride, containing by weight (on an oil-free basis): — 15 % or more but not more than 30 % of titanium and — 40 % or more but not more than 72 % of chlorine |
0 % |
1.1.2008-31.12.2008 |
ex381590 90 |
40 |
Catalyst, in the form of rodlets of a length of 5 mm or more but not exceeding 8 mm, consisting of a mixture of metals oxides containing predominantly oxides of iron, molybdenum and bismuth, whether or not containing silicon dioxide as filler, for use in the manufacture of acrylic acid (1) |
0 % |
1.1.2008-31.12.2008 |
ex381590 90 |
50 |
Catalyst containing titanium trichloride, in the form of a suspension in hexane or heptane containing by weight, in the hexane- or heptane-free material, 9 % or more but not more than 30 % of titanium |
0 % |
1.1.2008-31.12.2008 |
ex381590 90 |
60 |
Catalyst, in the form of rodlets, consisting of an acid aluminosilicate (zeolite): — with a mole-ratio of silicon dioxide: dialuminium trioxide of not less than 500: 1 and — containing by weight 0,2 % or more but not more than 0,8 % of platinum |
0 % |
1.1.2008-31.12.2008 |
ex381590 90 |
65 |
Catalyst based on a mordenite zeolite, in the form of granules, for use in the manufacture of mixtures of methylamines containing by weight 50 % or more of dimethylamine (1) |
0 % |
1.1.2008-31.12.2008 |
ex381590 90 |
70 |
Catalyst, consisting of a mixture of (2-hydroxypropyl)trimethylammonium formate and dipropylene glycols |
0 % |
1.1.2008-31.12.2008 |
ex381590 90 |
71 |
Catalyst, containing N-(2-hydroxypropylammonium)diazabicyclo (2,2,2) octane-2-ethyl hexanoate, dissolved in ethane-1,2-diol |
0 % |
1.1.2008-31.12.2011 |
ex381590 90 |
75 |
Catalyst, consisting of a mixture of 1,4-diazabicyclo[2.2.2]octane, 2-hydroxyethyliminodi(acetic acid) and dibutyltin di(acetate), containing by weight 5 % or more but not more than 10 % of 1,4-diazabicyclo[2.2.2]octane |
0 % |
1.1.2008-31.12.2008 |
ex381590 90 |
80 |
Catalyst consisting predominantly of dinonylnaphthalenedisulfonic acid in the form of a solution in isobutanol |
0 % |
1.1.2008-31.12.2008 |
ex381590 90 |
81 |
Catalyst, containing by weight 69 % or more but not more than 79 % of (2-hydroxy-1-methylethyl)trimethylammonium 2-ethylhexanoate |
0 % |
1.1.2008-31.12.2008 |
ex381590 90 |
82 |
Catalyst, containing by weight 35 % or more but not more than 55 % of (2-hydroxy-1-methylethyl)trimethylammonium formate and formic acid |
0 % |
1.1.2008-31.12.2008 |
ex381590 90 |
83 |
Catalyst, in the form of powder, containing aluminium magnesium hydroxide hydrate, rare-earth metals oxides and divanadium pentaoxide |
0 % |
1.1.2008-31.12.2008 |
ex381590 90 |
84 |
Powder catalyst containing by weight a minimum 96 % of oxides of copper, chromium and iron |
0 % |
1.1.2008-31.12.2008 |
ex381590 90 |
85 |
Catalyst based on aluminosilicate (zeolite), for the transalkylation of alkylaromatic hydrocarbons or the oligomerization of olefins (1) |
0 % |
1.1.2008-31.12.2008 |
ex381590 90 |
86 |
Catalyst, in the form of rodlets, consisting of an aluminosilicate (zeolite), containing by weight 2 % or more but not more than 3 % of rare-earth metals oxides and less than 1 % of disodium oxide |
0 % |
1.1.2008-31.12.2008 |
ex381590 90 |
87 |
Reaction initiator, consisting of diisopropyl peroxydicarbonate, in the form of a solution in diallyl 2,2’-oxydiethyl dicarbonate |
0 % |
1.1.2008-31.12.2008 |
ex381590 90 |
88 |
Catalyst, consisting of titanium tetrachloride and magnesium chloride, containing by weight on an oil- and hexane-free basis: — 4 % or more but not more than 10 % of titanium and — 10 % or more but not more than 20 % magnesium |
0 % |
1.1.2008-31.12.2008 |
ex381590 90 |
89 |
Rhodococcus rhodocrous J1 bacteria, containing enzymes, suspended in a polyacrylamide gel or in water, for use as a catalyst in the production of acrylamide by the hydration of acrylonitrile (1) |
0 % |
1.1.2008-31.12.2011 |
ex381700 80 |
10 |
Mixture of alkylnaphthalenes, containing by weight: — 88 % or more but not more than 98 % of hexadecylnaphthalene — 2 % or more but not more than 12 % of dihexadecylnaphthalene |
0 % |
1.1.2008-31.12.2008 |
ex381900 00 |
20 |
Fire resistant hydraulic fluid based on phosphate ester |
0 % |
1.1.2008-31.12.2008 |
ex382319 10 |
91 |
Mixture of fatty acids containing by weight: — 2 % or more but not more than 6 % of hexanoic acid, — 53 % or more but not more than 60 % of octanoic acid, — 34 % or more but not more than 42 % of decanoic acid and — not more than 2 % of dodecanoic acid |
0 % |
1.1.2008-31.12.2008 |
ex382490 15 |
10 |
Acid aluminosilicate (artificial zeolite of the Y type) in the sodium form, containing by weight not more than 11 % of sodium evaluated as sodium oxide, in the form of rodlets |
0 % |
1.1.2008-31.12.2008 |
ex382490 64 |
01 |
Intermediate products of the antibiotics manufacturing process obtained from the fermentation of Micromonospora purpurea, whether or not dried |
0 % |
1.1.2008-31.12.2008 |
ex382490 64 |
02 |
Cholic acid and 3α,12α-dihydroxy-5β-cholan-24-oic acid (deoxycholic acid), crude |
0 % |
1.1.2008-31.12.2008 |
ex382490 64 |
03 |
Products obtained by the N-ethylation of sisomycin (INN) |
0 % |
1.1.2008-31.12.2008 |
ex382490 64 |
04 |
Intermediate products of the antibiotics manufacturing process obtained from the fermentation of Micromonospora inyoensis, whether or not dried |
0 % |
1.1.2008-31.12.2008 |
ex382490 64 |
05 |
Residues of manufacture containing by weight 40 % or more of 11β,17,20,21-tetrahydroxy-6-methylpregna-1,4-dien-3-one 21-acetate |
0 % |
1.1.2008-31.12.2008 |
ex382490 64 |
06 |
Mixture of inosine (INN), dimepranol (INN) and acedoben (INN) |
0 % |
1.1.2008-31.12.2008 |
(4)ex382490 97 |
01 |
Colloidal diantimony pentaoxide |
0 % |
1.1.2008-31.12.2008 |
(4)ex382490 97 |
02 |
Mixture of nitromethane and 1,2-epoxybutane |
0 % |
1.1.2008-31.12.2008 |
(4)ex382490 97 |
03 |
Grains or granules, consisting of a mixture of dialuminium trioxide and zirconium dioxide, containing by weight: — 70 % or more but not more than 78 % of dialuminium trioxide and — 19 % or more but not more than 26 % of zirconium dioxide |
5,2 % |
1.1.2008-31.12.2008 |
(4)ex382490 97 |
04 |
Crude lithium hypochlorite |
0 % |
1.1.2008-31.12.2008 |
(4)ex382490 97 |
05 |
Polysilicate, modified with phosphoric acid, in the form of a solution in a mixture of ethanol, isopropanol and tetrahydrofuran, containing by weight 3 % or more but not more than 6 % of polysilicate |
0 % |
1.1.2008-31.12.2008 |
(4)ex382490 97 |
06 |
Preparation in the form: — of powder, containing by weight 75 % or more of zinc bis[3,5-bis(1-phenylethyl)salicylate] or — of aqueous dispersion, containing by weight 22 % or more but not more than 55 % of zinc bis[3,5-bis(1-phenylethyl)salicylate] |
0 % |
1.1.2008-31.12.2008 |
(4)ex382490 97 |
07 |
Film consisting of the oxides of either barium or calcium and either titanium or zirconium, mixed with binding materials |
0 % |
1.1.2008-31.12.2008 |
(4)ex382490 97 |
08 |
Preparation consisting essentially of alkaline asphalt sulfonate, of: — a specific gravity of 0,9 or more but not exceeding 1,5 and — a solubility in water of 70 % by weight or more |
0 % |
1.1.2008-31.12.2008 |
(4)ex382490 97 |
09 |
Anti-corrosion preparations consisting of salts of dinonylnaphthalenesulfonic acid, either: — on a support of mineral wax, whether or not modified chemically, or — in the form of a solution in an organic solvent |
0 % |
1.1.2008-31.12.2008 |
(4)ex382490 97 |
10 |
Calcined bauxite (refractory grade) |
0 % |
1.1.2008-31.12.2008 |
(4)ex382490 97 |
11 |
Magnetisable iron oxide, in the form of powder, containing by weight: — 30 % or more but not more than 38 % of bivalent iron in relation to the total iron and — 1 % or more but not more than 4 % of cobalt |
0 % |
1.1.2008-31.12.2008 |
(4)ex382490 97 |
12 |
Oligomer of tetrafluoroethylene, having one iodoethyl end-group |
0 % |
1.1.2008-31.12.2008 |
(4)ex382490 97 |
13 |
Preparations containing not less than 92 % but not more than 96,5 % by weight of 1,3:2,4-bis-O-(4-methylbenzylidene)-D-glucitol and also containing carboxylic acid derivatives and an alkyl sulphate |
0 % |
1.1.2008-31.12.2011 |
(4)ex382490 97 |
14 |
Calcium phosphonate phenate, dissolved in mineral oil |
0 % |
1.1.2008-31.12.2011 |
(4)ex382490 97 |
15 |
Mixture of disodium N-benzyloxycarbonyl-L-aspartate and sodium chloride, in the form of a solution in water |
0 % |
1.1.2008-31.12.2008 |
(4)ex382490 97 |
16 |
Disodium 9,10-dihydro-9,10-dioxoanthracene-2,7-disulfonate, containing by weight 10 % or more but not more than 20 % of sodium sulfate |
0 % |
1.1.2008-31.12.2008 |
(4)ex382490 97 |
17 |
Eutectic alloy wholly of potassium and sodium, containing by weight 77 % or more but not more than 79 % of potassium |
0 % |
1.1.2008-31.12.2008 |
(4)ex382490 97 |
18 |
4-Methylmandelic acid, crude |
0 % |
1.1.2008-31.12.2011 |
(4)ex382490 97 |
20 |
Preparation consisting by weight of 83 % or more of 3a,4,7,7a-tetrahydro-4,7-methanoindene (dicyclopentadiene), a synthetic rubber, whether or not containing by weight 7 % or more of tricyclopentadiene, and: — either an aluminium-alkyl compound, — or an organic complex of tungsten — or an organic complex of molybdenum |
0 % |
1.1.2008-31.12.2008 |
(4)ex382490 97 |
21 |
Mixture of tris[2-chloro-1-(chloromethyl)ethyl] phosphate and oligomers of methylphosphonic acid and phosphoric acid with ethane-1,2-diol |
0 % |
1.1.2008-31.12.2008 |
(4)ex382490 97 |
22 |
Preparations containing not less than 47 % by weight of 1,3:2,4-bis-O-benzylidene-D-glucitol |
0 % |
1.1.2008-31.12.2011 |
(4)ex382490 97 |
23 |
Mixture of sucrose esters, derived from the esterification of sucrose with industrial stearic acid |
0 % |
1.1.2008-31.12.2008 |
(4)ex382490 97 |
24 |
Preparations consisting predominantly of phosphabicyclononanes and P-alkyl derivatives thereof, in the form of a solution in 4-tert-butyltoluene |
0 % |
1.1.2008-31.12.2008 |
(4)ex382490 97 |
25 |
Lithium tantalate wafers, undoped |
0 % |
1.1.2008-31.12.2008 |
(4)ex382490 97 |
27 |
Preparation based on: 2-pentanone, 4-methyl-O,O’,O’-(methylsilylidyne)trioxime and 4-methyl-2-butanone-O, O’,O’,O’’-silane tetrayl tetraoxime |
0 % |
1.1.2008-31.12.2008 |
(4)ex382490 97 |
28 |
Preparation consisting predominantly of ethylene glycol and N,N-dimethylformamide or ethylene glycol and γ-butyrolactone, for the manufacture of electrolytic capacitors (1) |
0 % |
1.1.2008-31.12.2008 |
(4)ex382490 97 |
29 |
Preparation consisting predominantly of γ-butyrolactone and quaternary ammonium salts, for the manufacture of electrolytic capacitors (1) |
0 % |
1.1.2008-31.12.2008 |
(4)ex382490 97 |
30 |
2,4,7,9-Tetramethyldec-5-yne-4,7-diol, hydroxyethylated |
0 % |
1.1.2008-31.12.2008 |
(4)ex382490 97 |
31 |
Copper zinc ferrite, coated with a silicone resin, in the form of granules of a size not exceeding 120 μm |
0 % |
1.1.2008-31.12.2008 |
(4)ex382490 97 |
32 |
Styrene oligomer |
0 % |
1.1.2008-31.12.2008 |
(4)ex382490 97 |
33 |
Preparation consisting of α-(4-allyloxycarbonylbenzoyl)-ω-allyloxypoly[oxy(2-methylethylene)oxyterephthaloyl] and either diallyl-2,2’-oxydiethyl dicarbonate or diallyl isophthalate |
0 % |
1.1.2008-31.12.2008 |
(4)ex382490 97 |
34 |
Mixture of phytosterols in the form of a crystalline waxy powder, containing by weight: — 36 % or more, but not more than 79 % of sitosterols, — 15 % or more, but not more than 34 % of sitostanols, — 4 % or more, but not more than 25 % of campesterols, — 0 % or more, but not more than 14 % of campestanols |
0 % |
1.1.2008-31.12.2008 |
(4)ex382490 97 |
35 |
Nitrosylsulfuric acid of a purity by weight of 70 % or more but not exceeding 73 % |
0 % |
1.1.2008-31.12.2008 |
(4)ex382490 97 |
36 |
Preparation based on 2,5,8,11-tetramethyl-6-dodecyn-5,8-diol ethoxylate |
0 % |
1.1.2008-31.12.2012 |
(4)ex382490 97 |
37 |
Liquid crystal mixture for use in the manufacture of displays (1) |
0 % |
1.1.2008-31.12.2012 |
(4)ex382490 97 |
38 |
Alkyl carbonate-based preparation, also containing a UV absorber, for use in the manufacture of spectacle lenses (1) |
0 % |
1.1.2008-31.12.2012 |
(4)ex382490 97 |
39 |
Mixture containing by weight 40 % or more but not more than 50 % of 2-hydroxyethyl methacrylate and 40 % or more but not more than 50 % of glycerol ester of boric acid |
0 % |
1.1.2008-31.12.2008 |
(4)ex382490 97 |
40 |
Azelaic acid of a purity by weight of 75 % or more but not exceeding 85 % |
0 % |
1.1.2008-31.12.2008 |
(4)ex382490 97 |
42 |
Mixed metals oxides, in the form of powder, containing by weight: — either 5 % or more of barium, neodymium or magnesium and 15 % or more of titanium, — or 30 % or more of lead and 5 % or more of niobium, for use in the manufacture of dielectric films or for use as dielectric materials in the manufacture of multilayer ceramic capacitors (1) |
0 % |
1.1.2008-31.12.2008 |
(4)ex382490 97 |
43 |
7-Aminonaphthalene-1,3,6-trisulfonic acid and its salts, of a purity by weight of 65 % or more |
0 % |
1.1.2008-31.12.2008 |
(4)ex382490 97 |
44 |
Mixture of phytosterols, not in the form of powder, containing by weight: — 75 % or more of sterols, — not more than 25 % of stanols, for use in the manufacture of stanol/sterol esters (1) |
0 % |
1.1.2008-31.12.2012 |
(4)ex382490 97 |
45 |
Preparations consisting predominantly of ethylene glycol and: — either diethylene glycol, dodecandioic acid and ammonia water, — or silicon oxide, — or ammonium hydrogen azelate, — or ammonium hydrogen azelate and silicon oxide, — or dodecandioic acid, ammonia water and silicon oxide, for the manufacture of electrolytic capacitors (1) |
0 % |
1.1.2008-31.12.2008 |
(4)ex382490 97 |
46 |
Carboxylic acid anhydride based hardener for epoxyde resin, in liquid form, of a specific weight at 25 °C of 1,15 g/cm3 or more but not exceeding 1,18 g/cm3 |
0 % |
1.1.2008-31.12.2008 |
(4)ex382490 97 |
47 |
4-Methoxysalicylaldehyde, dissolved in N-methyl pyrrolidone |
0 % |
1.1.2008-31.12.2012 |
(4)ex382490 97 |
49 |
Mixed oxides of metals, in the form of powder, containing by weight: — 70 % or more but not more than 75 % of iron oxide, — 10 % or more but not more than 20 % of zinc oxide, — 10 % or more but not more than 15 % of magnesium oxide, — 1 % or more but not more than 5 % of manganese oxide and — 1 % or more but not more than 3 % of copper oxide |
0 % |
1.1.2008-31.12.2008 |
(4)ex382490 97 |
50 |
Zeolites consisting of oxides of barium, aluminium and silicon, containing by weight 30 % or more but not more than 40 % of barium oxide, in the form of spheres of which 80 % or more by weight have a diameter of 0,3 mm or more but not more than 1,2 mm |
0 % |
1.1.2008-31.12.2008 |
(4)ex382490 97 |
54 |
2-Hydroxybenzonitrile, in the form of a solution in N,N-dimethylformamide, containing by weight 45 % or more but not more than 55 % of 2-hydroxybenzonitrile |
0 % |
1.1.2008-31.12.2008 |
(4)ex382490 97 |
55 |
Mixture containing by weight 75 % or more of pentaerythritol triallyl ether |
0 % |
1.1.2008-31.12.2008 |
(4)ex382490 97 |
57 |
Mixture of trialkylphosphine oxides |
0 % |
1.1.2008-31.12.2008 |
(4)ex382490 97 |
58 |
Platinum oxide fixed on a porous support of aluminium oxide, containing by weight 0,1 % or more but not more than 1 % of platinum and 0,5 % or more but not more than 5 % of ethylaluminium dichloride |
0 % |
1.1.2008-31.12.2008 |
(4)ex382490 97 |
60 |
α-Phenoxycarbonyl-ω-phenoxypoly[oxy(2,6-dibromo-1,4-phenylene) isopropylidene(3,5-dibromo-1,4-phenylene)oxycarbonyl] |
0 % |
1.1.2008-31.12.2008 |
(4)ex382490 97 |
61 |
Mixture of metal oxides, in the form of powder, containing by weight: — 20 % or more of barium, — 10 % or more of titanium and — 4 % or more of lead or 3 % or more of niobium or 0,7 % or more of zirconium, for use as dielectric material in the manufacture of multilayer ceramic capacitors (1) |
0 % |
1.1.2008-31.12.2008 |
(4)ex382490 97 |
63 |
Triethylborane, in the form of a solution in tetrahydrofuran |
0 % |
1.1.2008-31.12.2008 |
(4)ex382490 97 |
64 |
Aluminium sodium silicate, in the form of spheres of a diameter of: — either 1,6 mm or more but not exceeding 3,4 mm, — or 4 mm or more but not exceeding 6 mm |
0 % |
1.1.2008-31.12.2008 |
(4)ex382490 97 |
65 |
Mixture of tris(alkoxycarbonylamino)-1,3,5-triazines in which alkoxy groups are methoxy and butoxy |
0 % |
1.1.2008-31.12.2008 |
(4)ex382490 97 |
66 |
Mixture of primary tert-alkylamines |
0 % |
1.1.2008-31.12.2008 |
(4)ex382490 97 |
67 |
Preparation consisting of indium tin oxide dispersed in organic solvents |
0 % |
1.1.2008-31.12.2008 |
(4)ex382490 97 |
72 |
Solution containing by weight 80 % or more of 2,4,6-trimethylbenzaldehyde in acetone |
0 % |
1.1.2008-31.12.2008 |
(4)ex382490 97 |
73 |
Particles of silicon dioxide on which are covalently bonded organic compounds, for use in the manufacture of high performance liquid chromatography columns (HPLC) and sample preparation cartridges (1) |
0 % |
1.1.2008-31.12.2008 |
(4)ex382490 97 |
77 |
Diethylmethoxyborane, in the form of a solution in tetrahydrofuran |
0 % |
1.1.2008-31.12.2008 |
(4)ex382490 97 |
80 |
Preparation containing by weight 81 % or more but not more than 89 % bis (3,4-epoxy-cyclohexylmethyl)-adipate |
0 % |
1.1.2008-31.12.2008 |
(4)ex382490 97 |
81 |
Calcium oxide stabilised zirconia in the form of lumps of which 94 % or more by weight is retained on a 16 mm sieve, containing by weight: — 92 % or more of zirconium dioxide and — 2 % or more but not more than 6 % of calcium oxide |
0 % |
1.1.2008-31.12.2008 |
(4)ex382490 97 ex390740 00 |
82 20 |
α-(2,4,6-Tribromophenyl)-ω-(2,4,6-tribromophenoxy)poly[oxy(2,6-dibromo-1,4-phenylene)isopropylidene(3,5-dibromo-1,4-phenylene)oxycarbonyl] |
0 % |
1.1.2008-31.12.2008 |
(4)ex382490 97 |
83 |
Mixture containing: — unsaturated, dimerised fatty acids, hydrogenated and polymerized with ethylenediamine and octadecan-1-ol, — white oil, — 2-methylpentane-2,4-diol and — glycerides of decanoic and octanoic acids |
0 % |
1.1.2008-31.12.2008 |
(4)ex382490 97 |
84 |
Reaction product, containing by weight: — 1 % or more but not more than 40 % of molybdenum oxide, — 10 % or more but not more than 50 % of nickel oxide, — 30 % or more but not more than 70 % of tungsten oxide |
0 % |
1.1.2008-31.12.2008 |
(4)ex382490 97 |
85 |
Particles of magnesium sodium silicate on which are ionically bonded chiral complexes of tris(1,10-phenanthroline)ruthenium, for use in the manufacture of high performance liquid chromatography columns (HPLC) (1) |
0 % |
1.1.2008-31.12.2008 |
(4)ex382490 97 |
88 |
Oligomeric reaction product, consisting of bis(4-hydroxyphenyl) sulfone and 1,1’-oxybis(2-chloroethane) |
0 % |
1.1.2008-31.12.2008 |
(4)ex382490 97 |
89 |
Oligomer of tetrafluoroethylene, having tetrafluoroiodoethyl end-groups |
0 % |
1.1.2008-31.12.2008 |
(4)ex382490 97 |
90 |
Hollow spheres of fused aluminosilicate containing 65-80 % amorphous aluminosilicate, with the following characteristics: — a melting point of between 1 600 °C and 1 800 °C, — a density of 0,6 0,8 g/cm3, for use in the manufacture of particle filters in motor vehicles (1) |
0 % |
1.1.2008-31.12.2008 |
(4)ex382490 97 |
92 |
Bis{4-[(5-chloro-2-hydroxyphenyl)azo]-3-hydroxy-N-phenyl-2-naphthalene carboxyamidate}ferrate with a mixture of ammonium, sodium and hydrogen cations |
0 % |
1.1.2008-31.12.2008 |
(4)ex382490 97 |
93 |
Prepared resin, based on diallyl 2,2’-oxydiethyl dicarbonate and oligomers thereof, containing by weight 42 % or more but not more than 52 % of diallyl 2,2’-oxydiethyl dicarbonate and 33 % or more but not more than 43 % of a copolymer of terephthalic acid, propane-1,2-diol and allyl alcohol |
0 % |
1.1.2008-31.12.2008 |
(4)ex382490 97 |
94 |
Prepared resin, based on diallyl 2,2’-oxydiethyl dicarbonate and oligomers thereof, containing by weight 73 % or more of diallyl 2,2’-oxydiethyl dicarbonate |
0 % |
1.1.2008-31.12.2008 |
(4)ex382490 97 |
95 |
Mixture of phytosterols, in the form of flakes, containing by weight 80 % or more of sterols and not more than 4 % of stanols |
0 % |
1.1.2008-31.12.2008 |
(4)ex382490 97 |
96 |
Zirconium dioxide, stabilised with calcium oxide, in the form of a powder |
0 % |
1.1.2008-31.12.2008 |
(4)ex382490 97 |
97 |
Preparation containing by weight either 10 % or more but not more than 20 % of lithiumfluorophosphate or 5 % or more but not more than 10 % of lithium perchlorate in mixtures of organic solvents |
0 % |
1.1.2008-31.12.2008 |
ex382569 00 |
10 |
Spent catalyst, in the form of rodlets of diameter of 1 mm or more but not exceeding 3 mm, containing a mixture of sulfides of tungsten and of nickel on a support of zeolite, containing by weight not more than 10 % of tungsten and not more than 10 % of nickel, for regeneration as a catalyst for hydrocarbon cracking (1) |
0 % |
1.1.2008-31.12.2008 |
ex390110 10 |
10 |
Linear polyethylene, of a specific gravity of 0,928 or more but not exceeding 0,935 and of a melt flow index of less than 0,6 g/min, for the manufacture of shrinkmelt binder fibres (1) |
0 % |
1.1.2008-31.12.2008 |
ex390110 90 |
10 |
Polyethylene for the manufacture of photo-resist film for semiconductors or printed circuits (1) |
0 % |
1.1.2008-31.12.2008 |
ex390110 90 |
20 |
Polyethylene, in the form of granules, of a specific gravity of 0,925 (0,0015), a melt flow index of 0,3 g/10 min (0,05 g/10 min), for the manufacture of blown films of a Haze value not exceeding 6 % and an elongation at break (MD/TD) of 210/340 (1) |
0 % |
1.1.2008-31.12.2008 |
ex390110 90 |
30 |
Polyethylene, in the form of granules, containing by weight 15 % or more of copper, for the purpose of protecting against static charge build up and corrosion |
0 % |
1.1.2008-31.12.2008 |
ex390120 90 |
10 |
Polyethylene, in one of the forms mentioned in note 6 (b) to Chapter 39, of a specific gravity of 0,945 or more but not exceeding 0,985, for the manufacture of films for typewriter ribbon or similar ribbon (1) |
0 % |
1.1.2008-31.12.2008 |
ex390120 90 |
20 |
Polyethylene, containing by weight 35 % or more but not more than 45 % of mica |
0 % |
1.1.2008-31.12.2008 |
ex390120 90 |
30 |
Polyethylene, in one of the forms mentioned in note 6 (b) to Chapter 39, of a specific gravity of 0,940 or more but not exceeding 0,943 and a melt flow index of 27 g/10 min (±5 g/10 min) (MFI 190 °C/2,16 kg as determined by the ISO 1133 method), for the manufacture of bicomponent spunbonded non-wovens (1) |
0 % |
1.1.2008-31.12.2008 |
ex390190 90 |
81 |
Copolymer of ethylene and propylene, modified with maleic anhydride, containing by weight more than 55 % of ethylene and not more than 3 % of maleic anhydride |
0 % |
1.1.2008-31.12.2008 |
ex390190 90 |
82 |
Polyethylene modified with maleic anhydride, containing by weight not more than 4 % of maleic anhydride, for use in the manufacture of fuel tanks for motor vehicles (1) |
0 % |
1.1.2008-31.12.2008 |
ex390190 90 |
91 |
Ionomer resin consisting of a salt of a copolymer of ethylene with methacrylic acid |
4 % |
1.1.2008-31.12.2008 |
ex390190 90 |
92 |
Chlorosulphonated polyethylene |
0 % |
1.1.2008-31.12.2008 |
ex390190 90 |
93 |
Copolymer of ethylene, vinyl acetate and carbon monoxide, for use as a plasticizer in the manufacture of roof sheets (1) |
0 % |
1.1.2008-31.12.2008 |
ex390190 90 |
94 |
Mixtures of A-B block copolymer of polystyrene and ethylene-butylene copolymer and A-B-A block copolymer of polystyrene, ethylene-butylene copolymer and polystyrene, containing by weight not more than 35 % of styrene |
0 % |
1.1.2008-31.12.2008 |
ex390190 90 ex390290 90 |
95 95 |
Copolymer of ethylene and butylene, having hydroxyl or acrylate end-groups, containing by weight 40 % or more but not more than 60 % of butylene |
0 % |
1.1.2008-31.12.2008 |
ex390190 90 ex390290 90 ex390390 90 |
96 96 50 |
Linear A-B block copolymer of polyisoprene, whether or not epoxidized, and either ethylene-butylene copolymer or styrene-ethylene-butylene copolymer, having hydroxyl end-groups |
0 % |
1.1.2008-31.12.2008 |
ex390190 90 |
97 |
Chlorinated polyethylene, in the form of powder |
0 % |
1.1.2008-31.12.2008 |
ex390210 00 |
10 |
Polypropylene containing no plasticizer and not more than: — 7 mg/kg of aluminium, — 2 mg/kg of iron, — 1 mg/kg of magnesium, — 8 mg/kg of chloride |
0 % |
1.1.2008-31.12.2008 |
ex390210 00 |
20 |
Polypropylene, containing no plasticiser, — of a melting point of more than 150 °C (as determined by the ASTM D 3417 method), — of a heat of fusion of 15 J/g or more but not exceeding 70 J/g, — of an elongation at break of 1 000 % or more (as determined by the ASTM D 638 method), — of a tensile modulus of 69 MPa or more but not exceeding 379 MPa (as determined by the ASTM D 638 method) |
0 % |
1.1.2008-31.12.2008 |
ex390210 00 |
30 |
Polypropylene, containing not more than 1 mg/kg of aluminium, 0,05 mg/kg of iron, 1 mg/kg of magnesium and 1 mg/kg of chloride, for use in the manufacture of packaging for disposable contact lenses (1) |
0 % |
1.1.2008-31.12.2008 |
ex390220 00 |
10 |
Polyisobutylene, of an average molecular weight (Mn) of 700 or more but not exceeding 800 |
0 % |
1.1.2008-31.12.2008 |
ex390230 00 ex390390 90 |
91 25 |
A-B Block copolymer of polystyrene and an ethylene-propylene copolymer, containing by weight 40 % or less of styrene, in one of the forms mentioned in note 6 (b) to Chapter 39 |
0 % |
1.1.2008-31.12.2008 |
ex390230 00 |
94 |
Chlorinated polypropylene, chemically modified with maleic anhydride, containing by weight 23 % or more but not more than 26 % of chlorine and less than 5 % of epoxy resin |
0 % |
1.1.2008-31.12.2008 |
ex390290 90 |
92 |
Polymers of 4-methylpent-1-ene |
0 % |
1.1.2008-31.12.2008 |
(4)ex390290 90 |
93 |
Synthetic poly-alpha-olefin having a viscosity of at least 38 × 10–6m2s–1 (38 centistokes) at 100 °C measured using the ASTM D 445 method |
0 % |
1.1.2008-31.12.2011 |
ex390290 90 |
97 |
Hydrogenated polyisobutene, in liquid form |
0 % |
1.1.2008-31.12.2008 |
ex390290 90 |
98 |
Synthetic poly-alpha-olefin with a viscosity at 100 °Celsius (measured according to method ASTM D 445) ranging from 3 centistokes to 9 centistokes and obtained by polymerization of a mixture of dodecene and tetradecene, containing a maximum of 40 % of tetradecene |
0 % |
1.1.2008-31.12.2011 |
ex390319 00 |
20 |
Polystyrene of a molecular weight (Mn) not exceeding 5 000 |
0 % |
1.1.2008-31.12.2008 |
ex390319 00 |
30 |
Crystalline polystyrene with a melting point of 268 °C or more but not more than 272 °C and a setting point of 247 °C or more but not more than 252 °C, whether or not containing additives and filling material |
0 % |
1.1.2008-31.12.2011 |
ex390390 90 |
10 |
Copolymer, entirely of styrene with maleic anhydride, or entirely of styrene with maleic anhydride and an acrylic monomer, whether or not containing a styrene-butadiene block copolymer, in one of the forms mentioned in note 6 (b) to Chapter 39, for the manufacture of sheetings for head-liners for cars (1) |
0 % |
1.1.2008-31.12.2008 |
ex390390 90 |
15 |
Copolymer, entirely of styrene with maleic anhydride, or entirely of styrene with maleic anhydride and an acrylic monomer, also partially esterified, of an average molecular weight (Mn) not exceeding 3 000, in one of the forms mentioned in note 6 (a) and (b) to Chapter 39 |
0 % |
1.1.2008-31.12.2008 |
ex390390 90 |
20 |
Copolymer of styrene with 2-ethylhexyl acrylate or with n-butyl acrylate, containing: — 10 mole % or more but not more than 16 mole % of acrylate, — 0,2 mg/kg or less of sodium and — 0,1 mg/kg or less of calcium |
0 % |
1.1.2008-31.12.2008 |
ex390390 90 ex391190 99 |
35 30 |
Copolymer of α-methylstyrene and styrene, having a softening point exceeding 113 °C |
0 % |
1.1.2008-31.12.2008 |
ex390390 90 ex390690 90 ex391190 99 |
40 40 50 |
Copolymer of styrene with α-methylstyrene and acrylic acid, of a molecular weight (Mn) of 500 or more but not exceeding 6 000 |
0 % |
1.1.2008-31.12.2008 |
ex390390 90 ex390690 90 |
55 45 |
Copolymer of styrene, methyl methacrylate, butyl acrylate and either acrylic acid or hydroxyethyl methacrylate, of a molecular weight (Mn) of 500 or more but not exceeding 6 000 |
0 % |
1.1.2008-31.12.2008 |
ex390390 90 |
65 |
Copolymer of styrene, butyl acrylate, butyl methacrylate, methyl methacrylate and acrylic acid, in the form of powder, containing by weight (81 ± 1) % of styrene, (6 ± 1) % of butyl acrylate, (5 ± 1) % of butyl methacrylate, (7 ± 1) % of methyl methacrylate and (1 ± 0,5) % of acrylic acid |
0 % |
1.1.2008-31.12.2008 |
ex390390 90 |
70 |
Ammonium polystyrenesulfonate, in the form of an aqueous solution |
0 % |
1.1.2008-31.12.2008 |
ex390390 90 |
75 |
Copolymer of styrene and vinyl pyrrolidone, containing by weight not more than 1 % of sodium dodecyl sulfate, in the form of an aqueous emulsion, for the manufacture of goods of subheading 3305 20 00 or of hair dyes of subheading 3305 90 90 (1) |
0 % |
1.1.2008-31.12.2008 |
ex390390 90 |
80 |
Granules of copolymer of styrene and divinylbenzene a minimum diameter of 150 μm and a maximum 800 μm and containing by weight: — minimum 65 % styrene, — maximum 25 % divinylbenzene for use in the manufacture of ion exchange resins (1) |
0 % |
1.1.2008-31.12.2008 |
ex390422 00 ex392690 97 |
91 80 |
Poly(vinyl chloride), dyed in the mass, in the form of flakes, grains, pebbles or rectangular chips, for use as decorative elements in floor and wall coverings (1) |
0 % |
1.1.2008-31.12.2008 |
ex390430 00 |
10 |
Copolymer of vinyl chloride with vinyl acetate and maleic acid, containing by weight: — 81,5 % or more but not more than 84,5 % of vinyl chloride, — 13,8 % or more but not more than 16,2 % of vinyl acetate and — 0,8 % or more but not more than 1,2 % of maleic acid, for the manufacture of goods of heading No 3215 or for use in the manufacture of coatings for containers and closures of a kind used for preserving food and drink (1) |
0 % |
1.1.2008-31.12.2008 |
ex390430 00 |
20 |
Copolymer of vinyl chloride with vinyl acetate and maleic acid, containing by weight: — 80,5 % or more but not more than 81,5 % of vinyl chloride, — 16,5 % or more but not more than 17,5 % of vinyl acetate and — 1,5 % or more but not more than 2,5 % of maleic acid, for use in heat-sealing of plastics onto steel substrate for industrial uses (1) |
0 % |
1.1.2008-31.12.2008 |
ex390440 00 |
91 |
Copolymer of vinyl chloride with vinyl acetate and vinyl alcohol, containing by weight: — 87 % or more but not more than 92 % of vinyl chloride, — 2 % or more but not more than 9 % of vinyl acetate and — 1 % or more but not more than 8 % of vinyl alcohol, in one of the forms mentioned in note 6 (a) or (b) to Chapter 39, for the manufacture of goods of heading No 3215 or 8523 or for use in the manufacture of coatings for containers and closures of a kind used for preserving food and drink (1) |
0 % |
1.1.2008-31.12.2008 |
ex390440 00 |
92 |
Copolymer of vinyl chloride, vinyl acetate, hydroxypropyl acrylate and maleic acid, containing by weight 80 % or more but not more than 83 % of vinyl chloride, 1,6 % or more but not more than 2 % of hydroxy groups and 0,25 % or more but not more than 0,38 % of carboxyl groups |
0 % |
1.1.2008-31.12.2008 |
ex390440 00 |
93 |
Copolymer of vinyl chloride and methyl acrylate, containing by weight (80 ± 1) % of vinyl chloride and (20 ± 1) % of methyl acrylate, in the form of a aqueous emulsion |
0 % |
1.1.2008-31.12.2008 |
ex390450 90 |
91 |
Copolymer of vinylidene chloride with vinyl chloride, containing by weight 79,5 % or more of vinylidene chloride, in one of the forms mentioned in note 6 (a) or (b) to Chapter 39, for the manufacture of fibres, monofilament or strip (1) |
0 % |
1.1.2008-31.12.2008 |
ex390461 00 |
10 |
Mixture of polytetrafluoroethylene and mica, in one of the forms mentioned in note 6 (b) to Chapter 39 |
0 % |
1.1.2008-31.12.2008 |
ex390461 00 |
20 |
Copolymer of tetrafluoroethylene and trifluoro(heptafluoropropoxy)ethylene, containing 3,2 % or more but not more than 4,6 % by weight of trifluoro(heptafluoropropoxy)ethylene and less than 1 mg/kg of extractable fluoride ions |
0 % |
1.1.2008-31.12.2008 |
ex390461 00 |
30 |
Polytetrafluoroethylene, in the form of powder, of a specific surface of 8 m2/g or more but not exceeding 12 m2/g, a particle size distribution of 10 % of less than 10 μm and 90 % of less than 35 μm and an average particle size of 20 μm |
0 % |
1.1.2008-31.12.2008 |
ex390461 00 |
60 |
Mixture of polytetrafluoroethylene (PTFE), sodium chloride and a nonionic surfactant |
0 % |
1.1.2008-31.12.2008 |
ex390469 90 |
92 |
Copolymer of tetrafluoroethylene and trifluoro(trifluoromethoxy)ethylene |
0 % |
1.1.2008-31.12.2008 |
ex390469 90 |
93 |
Copolymer of ethylene with chlorotrifluoroethylene, in one of the forms mentioned in note 6 (b) to Chapter 39 |
0 % |
1.1.2008-31.12.2008 |
ex390469 90 |
94 |
Copolymer of ethylene and tetrafluoroethylene |
0 % |
1.1.2008-31.12.2008 |
ex390469 90 |
96 |
Polychlorotrifluoroethylene, in one of the forms mentioned in note 6 (a) and (b) to Chapter 39 |
0 % |
1.1.2008-31.12.2008 |
ex390469 90 |
97 |
Copolymer of chlorotrifluoroethylene and vinylidene difluoride |
0 % |
1.1.2008-31.12.2008 |
ex390529 00 |
91 |
Copolymer of vinyl acetate, dibutyl maleate and acrylic acid, in the form of a solution in isopropyl acetate and toluene |
0 % |
1.1.2008-31.12.2008 |
ex390591 00 |
91 |
Copolymer of N-vinylcaprolactam, N-vinyl-2-pyrrolidone and dimethylaminoethyl methacrylate |
0 % |
1.1.2008-31.12.2008 |
ex390599 90 |
93 |
Poly(vinyl acetate phthalate) |
0 % |
1.1.2008-31.12.2008 |
ex390599 90 |
94 |
Polymer of vinylpyrrolidone and dimethylaminoethyl methacrylate, containing by weight 97 % or more but not more than 99 % of vinylpyrrolidone, in the form of a solution in water |
0 % |
1.1.2008-31.12.2008 |
ex390599 90 |
95 |
Hexadecylated or eicosylated polyvinylpyrrolidone |
0 % |
1.1.2008-31.12.2008 |
ex390599 90 |
96 |
Polymer of vinyl formal, in one of the forms mentioned in note 6 (b) to Chapter 39, of a molecular weight (Mw) of 25 000 or more but not exceeding 150 000 and containing by weight: — 9,5 % or more but not more than 13 % of acetyl groups evaluated as vinyl acetate and — 5 % or more but not more than 6,5 % of hydroxy groups evaluated as vinyl alcohol |
0 % |
1.1.2008-31.12.2008 |
ex390599 90 |
97 |
Povidone (INN)-iodine |
0 % |
1.1.2008-31.12.2008 |
ex390599 90 |
98 |
Poly(vinyl pyrrolidone) partially substituted by triacontyl groups, containing by weight 78 % or more but not more than 82 % of triacontyl groups |
0 % |
1.1.2008-31.12.2008 |
ex390610 00 |
10 |
Poly(methyl methacrylate), in the form of expansible beads containing 2-methylpentane as blowing agent |
0 % |
1.1.2008-31.12.2008 |
3906 90 60 |
Copolymer of methyl acrylate with ethylene and a monomer containing a non-terminal carboxy group as a substituent, containing by weight 50 % or more of methyl acrylate, whether or not mixed with silicon dioxide |
0 % |
1.1.2008-31.12.2008 |
|
ex390690 90 |
10 |
Polymerization product of acrylic acid with small quantities of a polyunsaturated monomer, for the manufacture of medicaments of heading No 3003 or 3004 (1) |
0 % |
1.1.2008-31.12.2008 |
ex390690 90 |
20 |
Polymerization product of acrylic acid with small quantities of a polyunsaturated monomer, for use as a stabilizer in emulsions or dispersions with a pH of more than 13 (1) |
6 % |
1.1.2008-31.12.2008 |
ex390690 90 |
30 |
Copolymer of styrene with hydroxyethyl methacrylate and 2-ethylhexyl acrylate, of a molecular weight (Mn) of 500 or more but not exceeding 6 000 |
0 % |
1.1.2008-31.12.2008 |
ex390690 90 |
50 |
Polymers of esters of acrylic acid with one or more of the following monomers in the chain: — chloromethyl vinyl ether, — chloroethyl vinyl ether, — chloromethylstyrene, — vinyl chloroacetate, — methacrylic acid, — butenedioic acid monobutyl ester, containing by weight not more than 5 % of each of the monomeric units, in one of the forms mentioned in note 6 (b) to Chapter 39 |
0 % |
1.1.2008-31.12.2008 |
ex390690 90 |
55 |
Mixtures containing copolymers of methyl acrylate and ethylene and polyether-ester copolymers containing terephthalic acid, in the form of granules or pellets |
0 % |
1.1.2008-31.12.2008 |
ex390690 90 |
60 |
Copolymer of butyl acrylate and vinyl chloride, containing by weight (58 ± 1) % of butyl acrylate and (42 ± 1) % of vinyl chloride, in the form of a aqueous emulsion |
0 % |
1.1.2008-31.12.2008 |
ex390690 90 |
70 |
Copolymer of ethylene dimethacrylate with either methyl methacrylate or dodecyl methacrylate |
0 % |
1.1.2008-31.12.2008 |
ex390690 90 |
75 |
Copolymer of N-[4,5-dihydro-5-oxo-1-(2,4,6-trichlorophenyl)(1’,4-bi-1H-pyrazol)-3-yl]-methacrylamide, butyl acrylate and styrene, in the form of powder |
0 % |
1.1.2008-31.12.2008 |
ex390690 90 |
80 |
Polydimethylsiloxane-graft-(polyacrylates; polymethacrylates) |
0 % |
1.1.2008-31.12.2008 |
ex390690 90 |
85 |
Non aqueous dispersion type polymers of esters of acrylic acid with a hydrolyzable silyl group at one or both polymer ends |
0 % |
1.1.2008-31.12.2008 |
ex390720 11 |
10 |
Poly(ethylene oxide) of an average molecular weight (Mn) of 100 000 or more |
0 % |
1.1.2008-31.12.2008 |
ex390720 21 |
10 |
Mixture, containing by weight 70 % or more but not more than 80 % of a polymer of glycerol and 1,2-epoxypropane and 20 % or more but not more than 30 % of a copolymer of dibutyl maleate and N-vinyl-2-pyrrolidone |
0 % |
1.1.2008-31.12.2008 |
ex390720 21 |
20 |
Copolymer of tetrahydrofuran and tetrahydro-3-methylfuran with an average molecular weight of 3 500 (±100) |
0 % |
1.1.2008-31.12.2008 |
ex390720 29 |
10 |
Products containing co-polymers of dextrose, sorbitol and citric or phosphoric acid, containing not less than 90 % by weight of co-polymers on the ashfree and anhydrous basis |
0 % |
1.1.2008-31.12.2011 |
ex390720 29 |
20 |
Poly[oxy-1,4-phenyleneisopropylidene-1,4-phenyleneoxy-(2-hydroxytrimethylene)], of an average molecular weight (Mw) of more than 26 000, in one of the forms mentioned in note 6 (b) to Chapter 39 |
0 % |
1.1.2008-31.12.2008 |
ex390720 99 |
10 |
Bis{2-[ω-hydroxy-poly(ethyleneoxy)]ethyl} hydroxymethylphosphonate |
0 % |
1.1.2008-31.12.2008 |
ex390720 99 |
15 |
Poly(oxypropylene) having alkoxysilyl end-groups |
0 % |
1.1.2008-31.12.2008 |
ex390720 99 |
30 |
Homopolymer of 1-chloro-2,3-epoxypropane (epichlorohydrin) |
0 % |
1.1.2008-31.12.2008 |
ex390720 99 |
35 |
Polyethylene glycol chemically modified with an isocyanate group containing a carbodiimide group, in the form of a solution in 2-methoxy-1-methylethyl acetate |
0 % |
1.1.2008-31.12.2008 |
ex390720 99 |
40 |
Polydimethylsiloxane grafted with a poly(ethylene oxide) having C20 and C22 fatty acids ester end-groups |
0 % |
1.1.2008-31.12.2008 |
ex390720 99 |
45 |
Copolymer of ethylene oxide and propylene oxide, having aminopropyl and methoxy end-groups |
0 % |
1.1.2008-31.12.2008 |
ex390720 99 |
50 |
Copolymer of ethylene oxide and propylene oxide, having 2-aminopropyl end-groups |
0 % |
1.1.2008-31.12.2008 |
ex390730 00 |
20 |
Epoxyde resin in the form of powder, containing by weight 44 % or more but not more than 55 % of quartz and 0,5 % or more but not more than 1 % of diantimony trioxide, for the coating of film capacitors (1) |
0 % |
1.1.2008-31.12.2008 |
ex390730 00 |
30 |
Epoxyde resin, without solvent, containing mineral fillers (silica), without glass fibre, of a specific weight at 25 °C of 1,55 g/cm3 or more but not exceeding 1,60 g/cm3 |
0 % |
1.1.2008-31.12.2008 |
ex390730 00 ex391690 15 ex392690 97 |
40 10 70 |
Epoxide resin, containing by weight 70 % or more of silicon dioxide, for the encapsulation of goods of heading No 8533, 8535, 8536, 8541, 8542 or 8548 (1) |
0 % |
1.1.2008-31.12.2008 |
ex390730 00 |
50 |
Liquid epoxide resin of 2-propenenitrile/1,3-butadiene-epoxide copolymer, not containing any solvent, with: — a zinc borate hydrate content not exceeding 40 % by weight, — a diantimony trioxide content not exceeding 5 % by weight |
0 % |
1.1.2008-31.12.2008 |
ex390740 00 |
10 |
Copolymer of hexane-1,6-diol, cyclohexane-1,4-dimethanol and ethylene carbonate |
0 % |
1.1.2008-31.12.2008 |
ex390760 80 |
10 |
Copolymer of terephthalic acid and isophthalic acid with ethylene glycol, butane-1,4-diol and hexane-1,6-diol |
0 % |
1.1.2008-31.12.2008 |
ex390760 80 |
20 |
Oxygen binding copolymer (as determined by the ASTM D 1434 and 3985 methods), obtained from benzenedicarboxylic acids, ethylene glycol and polybutadiene substituted by hydroxy groups |
0 % |
1.1.2008-31.12.2008 |
3907 70 00 |
Poly(lactic acid) |
0 % |
1.1.2008-31.12.2008 |
|
ex390791 90 |
10 |
Diallyl phthalate prepolymer, in the form of powder |
0 % |
1.1.2008-31.12.2008 |
ex390799 19 ex390799 98 |
10 10 |
Poly(oxy-1,4-phenylenecarbonyl), in the form of powder |
0 % |
1.1.2008-31.12.2008 |
ex390799 19 |
20 |
Liquid crystal copolyester with a melting point of not less than 270 °C, whether or not containing fillers |
0 % |
1.1.2008-31.12.2008 |
ex390799 19 |
40 |
Copolymer of isophthalic acid and 5-sodiosulphoisophthalic acid with cyclohexanedimethanol and diethylene glycol |
0 % |
1.1.2008-31.12.2008 |
ex390799 19 |
50 |
Semi-crystalline polycyclohexylenedimethylene terephthalate polymer resin, containing by weight 10 % or more but not more than 40 % of glass fibre, in the form of granules or pellets |
0 % |
1.1.2008-31.12.2011 |
(4)ex390799 19 |
60 |
Copolymer of terephthalic acid and isophthalic acid with bisphenol A |
0 % |
1.1.2008-31.12.2012 |
ex390890 00 |
10 |
Poly(iminomethylene-1,3-phenylenemethyleneiminoadipoyl), in one of the forms mentioned in note 6 (b) to Chapter 39 |
0 % |
1.1.2008-31.12.2008 |
ex390890 00 |
20 |
Copolymer consisting of hexamethylenediamine, isophthalic acid and terephthalic acid, in one of the forms mentioned in note 6(b) to Chapter 39 |
0 % |
1.1.2008-31.12.2008 |
ex390890 00 |
30 |
Reaction product of mixtures of octadecanecarboxylic acids polymerised with an aliphatic polyetherdiamine |
0 % |
1.1.2008-31.12.2008 |
ex390890 00 |
40 |
Thermoplastic polyamide resin having a fire point of more than 750 °C, for use in the manufacture of deflection yokes of cathode ray tubes (1) |
0 % |
1.1.2008-31.12.2008 |
ex390940 00 |
10 |
Polycondensation product of phenol with formaldehyde, in the form of hollow spheres of a diameter of less than 150 μm |
0 % |
1.1.2008-31.12.2008 |
ex391000 00 |
10 |
3-[(2-Aminoethyl)amino]propyl(methyl)cyclosiloxane |
0 % |
1.1.2008-31.12.2008 |
ex391000 00 |
20 |
Block copolymer of poly(methyl-3,3,3-trifluoropropylsiloxane) and poly[methyl(vinyl)siloxane] |
0 % |
1.1.2008-31.12.2008 |
ex391000 00 |
40 |
Biocompatible silicones for the manufacture of long term surgical implants (1) |
0 % |
1.1.2008-31.12.2011 |
(4)ex391000 00 |
50 |
Silicone based pressure sensitive adhesive in solvent containing copoly(dimethylsiloxane/diphenylsiloxane) gum |
0 % |
1.1.2008-31.12.2012 |
ex391190 19 |
10 |
Poly(oxy-1,4-phenylenesulfonyl-1,4-phenyleneoxy-4,4’-biphenylene) |
0 % |
1.1.2008-31.12.2008 |
(4)ex391190 19 |
30 |
Copolymer of ethyleneimine and ethyleneimine dithiocarbamate, in an aqueous solution of sodium hydroxide |
0 % |
1.1.2008-31.12.2012 |
ex391190 99 |
25 |
Copolymer of vinyltoluene and α-methylstyrene |
0 % |
1.1.2008-31.12.2008 |
ex391190 99 |
40 |
Mixed calcium and sodium salt of a copolymer of maleic acid and methyl vinyl ether, having a calcium content of 9 % or more but not more than 16 % by weight |
0 % |
1.1.2008-31.12.2008 |
ex391190 99 |
45 |
Copolymer of maleic acid and methyl vinyl ether |
0 % |
1.1.2008-31.12.2008 |
ex391190 99 |
55 |
Solution containing: — (36 ± 0,5) % by weight of polyamide with lateral ester groups, — (2 ± 0,5) % by weight of acrylic ester, — (48 ± 0,5) % by weight of 1-methyl-2-pyrrolidone, — (12 ± 0,5) % by weight of bis(2-methoxyethyl) ether, — 500 μg/kg or less of potassium and — 500 μg/kg or less of iron, for use in the manufacture of goods of heading No 8542 (1) |
0 % |
1.1.2008-31.12.2008 |
ex391190 99 |
60 |
Hydrocarbon prepolymer, obtained by the reaction of cyclopentadiene and 1,3-pentadiene |
0 % |
1.1.2008-31.12.2008 |
ex391190 99 |
65 |
Calcium zinc salt of a copolymer of maleic acid and methyl vinyl ether |
0 % |
1.1.2008-31.12.2008 |
ex391190 99 ex392690 97 |
75 75 |
Microspheres of a copolymer of divinylbenzene and styrene, of an average diameter of 220 μm or more but not exceeding 575 μm |
0 % |
1.1.2008-31.12.2008 |
ex391190 99 |
80 |
Poly[(8-methyl-8-methoxycarbonyltricyclo[5.2.1.02,6]decane-3,5-diyl)ethylene] |
0 % |
1.1.2008-31.12.2008 |
ex391190 99 |
85 |
Polymer of ethylene and styrene, cross-linked with divinylbenzene, in the form of a suspension |
0 % |
1.1.2008-31.12.2008 |
ex391190 99 |
86 |
Copolymer of methyl vinyl ether and maleic acid anhydride |
0 % |
1.1.2008-31.12.2011 |
ex391211 00 |
10 |
Non-plasticized cellulose triacetate, in the form of flakes, for the manufacture of cellulose triacetate yarn (1) |
0 % |
1.1.2008-31.12.2008 |
ex391239 10 |
10 |
Ethylcellulose, not plasticized |
0 % |
1.1.2008-31.12.2008 |
ex391239 10 |
20 |
Ethylcellulose, in the form of aqueous dispersion containing hexadecan-1-ol and sodium dodecyl sulfate, containing by weight (27 ± 3) % of ethylcellulose |
0 % |
1.1.2008-31.12.2008 |
ex391239 80 |
10 |
Cellulose, both hydroxyethylated and ethylated, insoluble in water |
0 % |
1.1.2008-31.12.2008 |
ex391239 80 |
20 |
Cellulose, both hydroxyethylated and alkylated with alkyl chain-lengths of 3 or more carbon atoms |
0 % |
1.1.2008-31.12.2008 |
ex391290 10 |
10 |
Cellulose acetate propionate, non-plasticised, in the form of powder: — containing by weight 25 % or more of propionyl (as determined by the ASTM D 817-72 method) and — of a viscosity not exceeding 120 poise (as determined by the ASTM D 817-72 method), for the manufacture of printing inks, paints, lacquers and other coatings, and reprographic coatings (1) |
0 % |
1.1.2008-31.12.2008 |
ex391290 10 |
20 |
Hydroxypropyl methylcellulose phthalate |
0 % |
1.1.2008-31.12.2008 |
ex391390 00 |
92 |
Protein, chemically modified by carboxylation and/or phthalic acid addition, having a molecular weight of 100 000 to 300 000 |
0 % |
1.1.2008-31.12.2008 |
ex391390 00 |
94 |
Granules containing by weight: — 35 % or more but less than 75 % of a high amylose extruded biopolymer produced from corn starch, — 5 % or more but less than 16 % polyvinyl alcohol, — 10 % or more but less than 46 % of polyol plasticisers, — 0,25 % or more but less than 3 % of stearic acid, — whether or not containing 30 % (±10 %) of biodegradable polyester resin but never to a level that exceeds the amount of the high amylose biopolymer |
0 % |
1.1.2008-31.12.2011 |
ex391390 00 |
95 |
Chondroitinsulfuric acid, sodium salt |
0 % |
1.1.2008-31.12.2008 |
ex391390 00 |
96 |
Powder consisting of 90 % (±5 %) by weight of a high amylose extruded biopolymer produced from corn starch, 10 % (±5 %) by weight of a synthetic polymer and 0,5 % (0,25 %) of stearic acid |
0 % |
1.1.2008-31.12.2011 |
ex391390 00 |
97 |
Chitosonium pyrrolidonecarboxylate |
0 % |
1.1.2008-31.12.2008 |
ex391390 00 |
98 |
Sodium hyaluronate |
0 % |
1.1.2008-31.12.2008 |
ex391590 90 |
10 |
Waste, parings and scrap of photographic, cinematographic and radiographic films |
0 % |
1.1.2008-31.12.2008 |
ex391690 90 |
10 |
Composite profile shape, reinforced with glass fibres, produced by pultrusion, for the manufacture of window frames (1) |
0 % |
1.1.2008-31.12.2008 |
ex391732 10 |
10 |
Flexible pipe of silicone foam, with continuous channels, of a Shore A hardness of 7 or more but not exceeding 48 and a density of 0,28 g/cm3 or more but not exceeding 0,92 g/cm3 |
0 % |
1.1.2008-31.12.2008 |
ex391732 31 ex391732 99 ex392690 97 |
91 10 45 |
Assembly of heat-shrinkable tubing of polyethylene with poly(vinyl acetate), arranged in parallel at equally spaced intervals and attached at one or both ends by perforated plastic strips, in rolls |
0 % |
1.1.2008-31.12.2008 |
ex391732 39 |
20 |
Pipe consisting of a block copolymer of polytetrafluoroethylene and polyperfluoroalkoxytrifluoroethylene, of a length of not more than 600 mm, a diameter of not more than 85 mm and a wall-thickness of 30 μm or more but not exceeding 110 μm |
0 % |
1.1.2008-31.12.2008 |
ex391732 39 |
30 |
Thermo-shrinkable polystyrene tube for use in the manufacture of zinc-carbon batteries (1) |
0 % |
1.1.2008-31.12.2008 |
ex391910 19 ex391910 38 ex391990 38 ex392099 28 |
10 20 10 20 |
Reflecting film, consisting of a layer of polyurethane, with, on one side, security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use, and embedded glass beads and, on the other side, an adhesive layer, covered on one side or on both sides with a release film |
0 % |
1.1.2008-31.12.2008 |
ex391910 31 ex391910 38 ex391990 31 ex392061 00 |
10 30 50 20 |
Reflecting laminated sheet, consisting of a film of polycarbonate totally embossed on one side in a regular shaped pattern, covered on both sides with one or more layers of plastic material, whether or not covered on one side with an adhesive layer and a release sheet |
0 % |
1.1.2008-31.12.2008 |
ex391910 38 |
10 |
Self-adhesive tape of metallised polyurethane containing glass beads for use in the manufacture of marine life-saving equipment (1) |
0 % |
1.1.2008-31.12.2008 |
ex391910 38 |
40 |
Double-sided, self-adhesive modified epoxy resin foil, put up in rolls, 10 to 20 cm wide, 10 to 210 m long and with a total thickness of 10 to 50 μm, not for retail sale |
0 % |
1.1.2008-31.12.2011 |
ex391910 61 ex391990 61 |
91 94 |
Reflecting film, consisting of a layer of poly(vinyl chloride), a layer of alkyd polyester, with, on one side, security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use, only visible by means of a retroreflecting lighting, and embedded glass beads and, on the other side, an adhesive layer, covered on one side or on both sides with a release film |
0 % |
1.1.2008-31.12.2008 |
ex391910 61 ex391990 61 |
92 95 |
Black polyvinyl chloride film having a high gloss of more than 90 degrees as determined by test method ASTM D 2457 covered on one side with a protective polyethylene terephthalate film and on the other side a pressure sensitive adhesive with channels and a polyethylene terephthalate release liner |
0 % |
1.1.2008-31.12.2011 |
(4)ex391910 61 ex391990 61 |
93 96 |
Reinforced polyethylene foam tape, coated on both sides with an acrylic micro channelled pressure sensitive adhesive and on one side a liner, with an application thickness of 0,38 mm or more but not more than 1,53 mm |
0 % |
1.1.2008-31.12.2012 |
ex391910 69 ex391990 69 |
91 96 |
Black acrylic foam tape, covered on one side with a heat activatable adhesive or an acrylic pressure sensitive adhesive and on the other side with an acrylic pressure sensitive adhesive and a release sheet, of a peel adhesion at an angle of 90° of more than 25 N/cm (as determined by the ASTM D 3330 method) |
0 % |
1.1.2008-31.12.2008 |
ex391910 69 ex391990 69 |
95 98 |
Reflecting laminated sheet showing a regular pattern, consisting of a film of poly(methylmethacrylate), followed by a layer of acrylic polymer containing microprisms, a film of poly(methylmethacrylate), an adhesive layer and a release sheet |
0 % |
1.1.2008-31.12.2008 |
ex391990 10 |
10 |
Shaped sheet of plastic, with an adhesive layer containing polyisobutylene and pectin, for the manufacture of colostomy bags (1) |
0 % |
1.1.2008-31.12.2008 |
ex391990 31 |
15 |
Poly(ethylene terephthalate) film, with a coloured layer on one side and a self adhesive layer on the other, coated on both sides with protective film, with an overall thickness of 100 (±10) μm, in rolls, for the manufacture of optical filters (1) |
0 % |
1.1.2008-31.12.2008 |
ex391990 31 |
25 |
Polyethylene terephthalate film: — laminated on one side with a copper mesh of a line width of 10 to 15 μm, — a coloured adhesive layer on the other, — coated on both sides with a protective film, — with a total thickness of 110-210 μm for use in the manufacture of optical filters (1) |
0 % |
1.1.2008-31.12.2008 |
ex391990 31 |
35 |
Polyethylene terephthalate film, covered on one side with a tinted layer and on the other with an adhesive layer, coated on both sides with a protective film, with an overall thickness of 235 (±5) μm, for the manufacture of optical filters (1) |
0 % |
1.1.2008-31.12.2008 |
ex391990 31 ex392062 19 ex392062 90 ex392063 00 ex392069 00 |
40 20 20 30 30 |
Reflecting polyester sheeting embossed in a pyramidal pattern, for the manufacture of safety stickers and badges, safety clothing and accessories thereof, or of school satchels, bags or similar containers (1) |
0 % |
1.1.2008-31.12.2008 |
ex391990 31 |
60 |
Film consisting of 1 to 3 laminated layers of poly(ethylene terephthalate) and a copolymer of terephthalic acid, sebacic acid and ethylene glycol, coated on one side with an acrylic abrasion resistant coating and on the other side with an acrylic pressure sensitive adhesive, a water soluble methylcellulose coating and a poly(ethylene terephthalate) protective liner |
0 % |
1.1.2008-31.12.2008 |
(4)ex391990 31 |
65 |
Film consisting of a multi-layer construction of poly(ethylene terephthalate) and copolymer of butylacrylate and methylmethacrylate, coated on one side with an acrylic abrasion resistant coating incorporating nanoparticles of antimony tin oxide and carbon black, and on the other side with an acrylic pressure sensitive adhesive and a silicone-coated poly(ethylene terephthalate) protective liner |
0 % |
1.1.2008-31.12.2012 |
ex391990 31 |
70 |
Poly(ethylene terephthalate) sheet, covered on one side with an antistatic layer and a hardcoat layer and on the other side with an adhesive layer and a release sheet, in rolls, for the manufacture of optical filters (1) |
0 % |
1.1.2008-31.12.2008 |
(4)ex391990 31 |
75 |
Poly (ethylene terephthalate) film, with an adhesive strenght of not more than 0,147 N/25mm and an electrostatic discharge of not more than 500 V, used in the production of LCD modules (1) |
0 % |
1.1.2008-31.12.2012 |
(4)ex391990 31 |
80 |
Polyester film coated on both sides with an acrylic and/or rubber pressure sensitive adhesive put up in rolls of a width of 45,7 cm or more but not exceeding 78,5 cm (supplied with a release liner) |
0 % |
1.1.2008-31.12.2012 |
ex391990 61 ex391990 69 |
92 92 |
Poly(vinyl chloride) sheeting, of a thickness of less than 1 mm, coated with an adhesive in which are embedded glass balls of a diameter not exceeding 100 μm |
0 % |
1.1.2008-31.12.2008 |
ex391990 61 ex391990 69 ex392010 89 |
93 93 25 |
Adhesive film consisting of a base of a copolymer of ethylene and vinyl acetate (EVA) of a thickness of 70 μm or more and an adhesive part of acrylic type of a thickness of 5 μm or more, for the protection of the surface of silicon discs (1) |
0 % |
1.1.2008-31.12.2008 |
(4)ex391990 61 ex900120 00 |
97 40 |
Polarizer film, in rolls, consisting of a multilayered polyvinyl alcohol film, supported on either side by a triacetyl cellulose film, with a pressure sensitive adhesive and release film on one side, for use in the manufacture of LCD modules (1) |
0 % |
1.1.2008-31.12.2012 |
ex391990 69 ex392051 00 |
95 30 |
Biaxially-oriented film of poly(methyl methacrylate), of a thickness of 50 μm or more but not exceeding 90 μm, whether or not covered on one side with an adhesive layer and a release sheet |
0 % |
1.1.2008-31.12.2008 |
ex392010 26 |
20 |
Film of polyethylene, of a thickness of 20 μm or more but not exceeding 45 μm, containing calcium carbonate in the mass, for the manufacture of napkins for babies or of sanitary towels or of tampons or of disposable surgical gowns (1) |
0 % |
1.1.2008-31.12.2008 |
ex392010 26 ex392010 89 |
30 20 |
Film of a thickness not exceeding 0,20 mm, of a blend of polyethylene and a copolymer of ethylene with oct-1-ene, embossed in a regular rhomboidal pattern, for coating both sides of a layer of unvulcanized rubber (1) |
0 % |
1.1.2008-31.12.2008 |
ex392010 26 |
40 |
Film of polyethylene, of a kind used for typewriter ribbon |
0 % |
1.1.2008-31.12.2008 |
ex392010 40 |
91 |
Synthetic paper pulp, in the form of moist sheets, made from unconnected finely-branched polyethylene fibrils, whether or not blended with cellulose fibres in a quantity not exceeding 15 %, containing poly(vinyl alcohol) dissolved in water as the moistening agent |
0 % |
1.1.2008-31.12.2008 |
ex392010 40 |
92 |
Laminated sheet or strip consisting of a film composed of a blend of a copolymer of ethylene with vinyl acetate and a modified ethylene-propylene-elastomer (EPM) or a modified ethylene-propylene-diene elastomer (EPDM), coated or covered on both sides with a film of a copolymer of ethylene with vinyl acetate |
0 % |
1.1.2008-31.12.2008 |
ex392010 89 |
35 |
Reflecting film, consisting of a layer of polyethylene, a layer of polyurethane, with, on one side, security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use, only visible by means of a retroreflecting lighting, and embedded glass beads and, on the other side, a hot-melt adhesive layer, covered on one side or on both sides with a release film |
0 % |
1.1.2008-31.12.2008 |
ex392010 89 |
40 |
Composite sheet containing an acrylic coating and laminated to a high-density polyethylene layer, of a total thickness of 0,8 mm or more but not exceeding 1,2 mm |
0 % |
1.1.2008-31.12.2011 |
ex392020 21 |
30 |
Biaxially oriented polypropylene film with a coextruded layer of polyethylene on one side and a total thickness of 11,5 μm or more but not more than 13,5 μm. |
0 % |
1.1.2008-31.12.2008 |
ex392020 29 |
91 |
Mono-axial oriented film, consisting of three layers, each layer consisting of a mixture of polypropylene and a copolymer of ethylene and vinyl acetate, having: — a thickness of 55 μm or more but not exceeding 97 μm, — a tensile modulus in the machine direction of 0,75 GPa or more but not exceeding 1,45 GPa and — a tensile modulus in the transverse direction of 0,20 GPa or more but not exceeding 0,55 GPa |
0 % |
1.1.2008-31.12.2008 |
ex392020 90 |
91 |
Synthetic paper pulp, in the form of moist sheets, made from unconnected finely-branched polypropylene fibrils, whether or not blended with cellulose fibres in a quantity not exceeding 15 %, containing poly(vinyl alcohol) dissolved in water as the moistening agent |
0 % |
1.1.2008-31.12.2008 |
ex392020 90 |
92 |
Laminated sheet or strip, consisting of a film of a thickness of 181 μm or more but not exceeding 223 μm composed of a blend of a copolymer of propylene with ethylene and a copolymer of styrene-ethylene-butylene-styrene (SEBS) coated or covered on one side with a layer of a copolymer of styrene-ethylene-butylene-styrene (SEBS) and a layer of polyester |
0 % |
1.1.2008-31.12.2008 |
ex392020 90 |
93 |
Polypropylene sheet, of a thickness of 0,5 mm or more but not exceeding 1,0 mm, having a tensile strength at break of 14,7 MPa or more but not exceeding 21 MPa (as determined by the ASTM D 638 method), in rolls of a width of 3,81 m |
0 % |
1.1.2008-31.12.2008 |
ex392030 00 |
20 |
Laminated sheet or strip, consisting of a film composed of a blend of a thermoplastic elastomer (TPE) of styrene-butadiene-styrene (SBS) with polyethylene or polypropylene, of a thickness of 100 μm or more but not exceeding 200 μm, coated or covered on both sides with a film of polypropylene of a thickness not exceeding 20 μm |
0 % |
1.1.2008-31.12.2008 |
ex392043 10 ex392049 10 |
91 91 |
Reflecting sheeting, consisting solely of a single layer of poly(vinyl chloride), wholly embossed on one side in a regular pyramidal pattern |
0 % |
1.1.2008-31.12.2008 |
ex392043 10 |
92 |
Sheeting of poly(vinyl chloride), stabilized against ultraviolet rays, without any holes, even microscopic, of a thickness of 60 μm or more but not exceeding 80 μm, containing 30 or more but not more than 40 parts of plasticizer to 100 parts of poly(vinyl chloride) |
0 % |
1.1.2008-31.12.2008 |
ex392043 10 |
93 |
Poly(vinyl chloride) sheet, with relief printing, of a kind used in the templates for textile printing |
0 % |
1.1.2008-31.12.2008 |
ex392043 10 ex392049 10 |
94 93 |
Film of a specular gloss of 70 or more, measured at an angle of 60° using a glossmeter (as determined by the ISO 2813:2000 method), consisting of one or two layers of poly(vinyl chloride) coated on both sides with a layer of plastic, of a thickness of 0,26 mm or more but not exceeding 1,0 mm, covered on the gloss surface with a protective film of polyethylene, in rolls of a width of 1 000 mm or more but not exceeding 1 450 mm, for use in the manufacture of goods of heading No 9403 (1) |
0 % |
1.1.2008-31.12.2008 |
ex392043 10 ex392049 10 |
95 92 |
Reflecting laminated sheet, consisting of a film of poly(vinyl chloride) and a film of an other plastic totally embossed in a regular pyramidal pattern, covered on one side with a release sheet |
0 % |
1.1.2008-31.12.2008 |
ex392043 10 |
96 |
Film, of a specular gloss of 70 or more measured at an angle of 60° using a glossmeter (as determined by the ISO 2813:2000 method), consisting of a layer of poly(ethylene terephthalate) and a layer of colored poly(vinyl chloride), for coating panels and doors of a kind used in the manufacture of domestic appliances (1) |
0 % |
1.1.2008-31.12.2008 |
ex392043 10 |
97 |
Film embossed to a depth of not more than 12 μm, of a specular gloss of 7 or more but not exceeding 17, measured at an angle of 60° using a glossmeter (as determined by the ISO 2813:2000 method), consisting of at least two layers of poly(vinyl chloride), of a total thickness not exceeding 0,5 mm, covered on the embossed side with a protective film, in rolls of a width of 1 400 mm or more but not exceeding 1 420 mm, for use in the manufacture of goods of heading No 9403 (1) |
0 % |
1.1.2008-31.12.2008 |
ex392051 00 |
10 |
Poly(methyl methacrylate) plate, with an antistatic coating, of dimensions of 738 × 972 mm (-1,5 mm) |
0 % |
1.1.2008-31.12.2008 |
ex392051 00 |
20 |
Plate of poly(methyl methacrylate) containing aluminium trihydroxide, of a thickness of 3,5 mm or more but not exceeding 19 mm |
0 % |
1.1.2008-31.12.2008 |
ex392059 90 |
10 |
Non-cellular and non-laminated sheet of modified copolymer of acrylonitrile-methyl acrylate with a thickness of 1,0 mm or more but not more than 1,3 mm, put up in rolls |
0 % |
1.1.2008-31.12.2011 |
ex392061 00 |
10 |
Polycarbonate film of a thickness not exceeding 15 μm, for the manufacture of film capacitors (1) |
0 % |
1.1.2008-31.12.2008 |
ex392062 19 ex392062 19 |
01 03 |
Coextruded opaque sheet of poly(ethylene terephthalate), of a thickness of 50 μm or more but not exceeding 350 μm, consisting especially of a layer containing carbon black |
0 % |
1.1.2008-31.12.2008 |
ex392062 19 ex392062 19 |
04 06 |
Poly(ethylene terephthalate) film, of a thickness of less than 11 μm, for the manufacture of audiodigital tapes for cassettes (1) |
0 % |
1.1.2008-31.12.2008 |
ex392062 19 ex392062 19 |
07 09 |
Poly(ethylene terephtalate) film, not coated with an adhesive, of a thickness not exceeding 25 μm, either: — only dyed in the mass, or — dyed in the mass and metallized on one side |
0 % |
1.1.2008-31.12.2008 |
ex392062 19 ex392062 19 |
11 13 |
Film of poly(ethylene terephthalate) only, of a total thickness not exceeding 120 μm, consisting of one or two layers each containing a colouring and/or UV-absorbing material throughout the mass, uncoated with an adhesive or any other material |
0 % |
1.1.2008-31.12.2008 |
ex392062 19 ex392062 19 |
14 16 |
Poly(ethylene terephthalate) film, of a thickness of 20 μm or more but not exceeding 150 μm, coated on one side with silicone, for use in the manufacture of window film (1) |
3 % |
1.1.2008-31.12.2011 |
ex392062 19 ex392062 19 |
17 19 |
Laminated film of poly(ethylene terephthalate) only, of a total thickness not exceeding 120 μm, consisting of one layer which is metallised only and one or two layers each containing a colouring and/or UV-absorbing material throughout the mass, uncoated with an adhesive or any other material |
0 % |
1.1.2008-31.12.2008 |
ex392062 19 ex392062 19 |
21 23 |
Film of poly(ethylene terephthalate), coated or covered on one side or on both sides with a layer of modified polyester, of a total thickness of 7 μm or more but not exceeding 11 μm, for the manufacture of video tapes with a magnetic layer of metallic pigments and a width of 8 mm or of 12,7 mm (1) |
0 % |
1.1.2008-31.12.2008 |
ex392062 19 ex392062 19 |
24 26 |
Single ply film of poly(ethylene terephthalate) only, of a thickness not exceeding 120 μm, which only: — contains a colouring and/or UV-absorbing material throughout the mass and — is metallised on one side, whether or not coated on one or both sides with a vinyl acrylate polymer but having no other coating or adhesive |
0 % |
1.1.2008-31.12.2008 |
ex392062 19 ex392062 19 |
27 29 |
Film of poly(ethylene terephthalate), of a total thickness not exceeding 120 μm, of a width of 100 mm or more but not exceeding 115 mm, coated on both sides with one or more layers containing different chemicals, for the manufacture of goods of subheading 3701 20 00 (1) |
0 % |
1.1.2008-31.12.2008 |
ex392062 19 ex392062 19 |
31 33 |
Film of poly(ethylene terephthalate), on one side metallised and coated with white ink and a protective layer and on the other side coated with a thermosensitive seal layer, of a width of 100 mm or more but not exceeding 150 mm, for the manufacture of goods of subheading 3701 20 00 (1) |
0 % |
1.1.2008-31.12.2008 |
ex392062 19 ex392062 19 |
34 36 |
Film of poly(ethylene terephthalate), coated on one side with a layer of modified polyester, of a thickness of 20 μm (0,7 μm) or of 30 μm (0,9 μm), for the manufacture of audio magnetic tapes of a total thickness of 33 μm or more (1) |
0 % |
1.1.2008-31.12.2008 |
ex392062 19 ex392062 19 |
37 39 |
Poly(ethylene terephthalate) film, of a thickness not exceeding 12 μm, coated on one side with a layer of aluminium oxide of a thickness not exceeding 35 nm |
0 % |
1.1.2008-31.12.2008 |
ex392062 19 ex392062 19 |
41 43 |
Poly(ethylene terephthalate) film, of a thickness of 18 μm or more but not exceeding 25 μm, having: — a shrinkage of (3,4 ± 0,1) % in the machine direction (as determined by the ASTM D 1204 method) and — a shrinkage of (0,3 ± 0,2) % in the transverse direction (as determined by the ASTM D 1204 method) |
0 % |
1.1.2008-31.12.2008 |
ex392062 19 ex392062 19 |
44 46 |
Poly(ethylene terephthalate) film, of a thickness not exceeding 19 μm or of a weight of 20 g/m2 or more but not exceeding 26,7 g/m2, for use in the manufacture of photo-resist film (1) |
0 % |
1.1.2008-31.12.2008 |
ex392062 19 ex392062 19 |
47 49 |
Film of poly(ethylene terephthalate), coated on both sides with a layer of epoxy acrylic resin, of a total thickness of 37 μm (±3 μm) |
0 % |
1.1.2008-31.12.2008 |
(4)ex392062 19 ex392062 19 |
51 53 |
Film of poly(ethylene terephthalate), poly(ethylene naphtalate) or similar polyester, coated on one side with metal and/or metal oxides, containing by weight less than 0,1 % of aluminium, of a thickness not exceeding 300 μm and having a surface resistivity not exceeding 10 000 ohms (per square) (as determined by the ASTM D 257-99 method) |
0 % |
1.1.2008-31.12.2008 |
ex392062 19 ex392062 19 |
54 56 |
Matt film of poly(ethylene terephthalate), of a specular gloss of 15 measured at an angle of 45° and 18 measured at an angle of 60° using a glossmeter (as determined by the ISO 2813:2000 method) and a width of 1 600 mm or more |
0 % |
1.1.2008-31.12.2008 |
ex392062 19 ex392062 19 |
57 59 |
Film of white poly(ethylene terephthalate), dyed in the mass, of a thickness of 185 μm or more but not exceeding 253 μm, coated on both sides with an antistatic layer |
0 % |
1.1.2008-31.12.2008 |
ex392062 19 ex392062 19 |
67 69 |
Poly(ethylene terephthalate) film, coated with among other a scratch resistant layer based on polyacrylate and a thermoadhesive layer, of a nominal width of 790 mm and a total thickness of 23 μm or more but not exceeding 26 μm |
0 % |
1.1.2008-31.12.2008 |
ex392062 19 ex392069 00 |
71 70 |
Non-metallised reflecting film, consisting of outside layers of poly(ethylene terephthalate) or poly(ethylene naphthalate) and multiple layers of poly(methyl methacrylate), of a reflectance coefficient of 95 % or more (as determined by the ASTM E 1164-94 and ASTM E 387-95 methods) and a total thickness not exceeding 70 μm |
0 % |
1.1.2008-31.12.2008 |
ex392062 19 |
72 |
Non-metallised reflecting film, consisting of outside layers of poly(ethylene terephthalate) and multiple layers of poly(methyl methacrylate), of a total thickness of 51 μm (±10 %), for use in the manufacture of laminated solar-reflecting automotive glass (1) |
0 % |
1.1.2008-31.12.2008 |
ex392062 19 ex392069 00 |
73 40 |
Iridescent film of polyester and poly(methyl methacrylate) |
0 % |
1.1.2008-31.12.2008 |
ex392062 19 ex392062 19 |
74 76 |
Multilayer film of a thickness not exceeding 150 μm, consisting of a polyester film coated on one side with polycarbonate resin, metallized on the other side with titanium coated with polycarbonate resin and other layers containing N,N’-diphenyl-N,N’-di-m-tolylbiphenyl-4,4’-ylenediamine |
0 % |
1.1.2008-31.12.2008 |
ex392062 19 ex392062 19 |
77 78 |
Sheet of poly(ethylene terephthalate), containing: — temperature-sensitive layers which form primary colours after heating, — reflective layer, — protective layer, to be used in polychromatic thermal printers (1) |
0 % |
1.1.2008-31.12.2008 |
ex392062 19 |
88 |
Laminated sheet, consisting of a biaxially oriented film of poly(ethylene terephthalate), covered on one side or on both sides with a layer of poly(ethylene terephthalate), for use in the manufacture of identity cards, credit cards and similar products (including ‘smart’ cards) (1) |
0 % |
1.1.2008-31.12.2008 |
ex392062 90 ex392062 90 |
31 33 |
Film of poly(ethylene terephthalate), of a thickness of 500 μm (±25 μm) |
0 % |
1.1.2008-31.12.2008 |
ex392062 90 |
40 |
Strips of poly(ethylene terephthalate), covered on both sides with a layer of chemically modified polyester, of a width not exceeding 16 mm and a thickness of 0,5 mm or more but not exceeding 2 mm, having a tensile strength at break of 0,7 GPa or more (as determined by the ASTM D 638 method) |
0 % |
1.1.2008-31.12.2008 |
ex392069 00 |
20 |
Film of poly(ethylene naphthalene-2,6-dicarboxylate) |
0 % |
1.1.2008-31.12.2008 |
ex392069 00 |
50 |
Polycondensation product of terephthalic acid with a mixture of cyclohex-1,4-ylenedimethanol and ethane-1,2-diol, in the form of a film |
0 % |
1.1.2008-31.12.2008 |
ex392069 00 |
60 |
Film of a copolymer of ethylene terephthalate and ethylene isophthalate, of a thickness not exceeding 2 μm |
0 % |
1.1.2008-31.12.2008 |
(4)ex392079 90 |
10 |
Cellulose acetyl butyrate film, whether or not combined with a polycarbonate layer, of a thickness not exceeding 0,81 mm containing a micro-louvre with a typical viewing angle of 30 degrees measured on each side of the surface normal |
0 % |
1.1.2008-31.12.2012 |
ex392091 00 |
91 |
Poly(vinyl butyral) film having a graduated coloured band |
3 % |
1.1.2008-31.12.2008 |
ex392091 00 |
92 |
Plasticized film of polyvinyl butyral, containing by weight: — either 14,5 % or more but not more than 17,5 % of dihexyl adipate, — or 14,5 % or more but not more than 28,5 % of dibutyl sebacate |
0 % |
1.1.2008-31.12.2008 |
ex392091 00 |
93 |
Film of poly(ethylene terephthalate), whether or not metallised on one or both sides, or laminated film of poly(ethylene terephthalate) films, metallised on the external sides only, and having the following characteristics: — a visible light transmission of 50 % or more, — coated on one or both sides with a layer of poly(vinyl butyral) but not coated with an adhesive or any other material except poly(vinyl butyral), — a total thickness not exceeding 0,2 mm without taking the presence of poly(vinyl butyral) into account, for use in the manufacture of heat-reflecting or decorative laminated glass (1) |
0 % |
1.1.2008-31.12.2008 |
ex392099 28 |
10 |
Reflecting sheet of metallised polyurethane, containing glass beads, coated with a hot-melt adhesive layer, covered on one or both sides with a release sheet, in rolls of a width of 1 020 mm (±20 mm), for slitting into safety clothing reflecting strip (1) |
0 % |
1.1.2008-31.12.2008 |
ex392099 28 ex392190 55 ex741021 00 |
30 10 30 |
Film of polyimide, not containing epoxyde resin and/or glass fibres: — metallized by sputtering with copper on one side or on both sides, — metallized by sputtering with copper and plated on one side or on both sides with refined copper or — covered on one side or on both sides with a copper foil |
0 % |
1.1.2008-31.12.2008 |
ex392099 28 |
40 |
Mono-axially oriented polymer film containing the following monomers: — Poly (tetramethylene ether glycol), — Bis (4-isocyanotocyclohexyl) methane, — 1,4-Butanediol or 1,3-Butanediol, — with a thickness of 0,25mm or more but not more than 5,0mm, — embossed with a regular pattern on one surface, — and covered with a release sheet |
0 % |
1.1.2008-31.12.2008 |
ex392099 28 |
50 |
Thermoplastic polyurethane film, of a thickness of 250 μm or more but not more than 350 μm, covered on one side with a removable protective film |
0 % |
1.1.2008-31.12.2011 |
ex392099 59 |
20 |
Film entirely of poly(vinyl alcohol), of a thickness not exceeding 1 mm and containing by weight: — 2 % or less of unhydrolysed acetate groups evaluated as vinyl acetate and — 5 % or more but not more than 25 % of glycerol as plasticizer, for the manufacture of roof-windows (1) |
0 % |
1.1.2008-31.12.2008 |
ex392099 59 |
25 |
Poly(1-chlorotrifluoroethylene) film |
0 % |
1.1.2008-31.12.2008 |
ex392099 59 |
30 |
Film and sheet of a copolymer of ethylene with chlorotrifluoroethylene, of a thickness of 12 μm or more but not exceeding 400 μm |
0 % |
1.1.2008-31.12.2008 |
ex392099 59 |
35 |
Film entirely of poly(vinyl alcohol), of a thickness not exceeding 1 mm and of a width of 2,20 m or more, with an extension at break, in the transverse direction, of 350 % or more |
0 % |
1.1.2008-31.12.2008 |
ex392099 59 |
40 |
Biaxially-oriented film of poly(vinyl alcohol), coated on both sides, of a total thickness of less than 1 mm |
0 % |
1.1.2008-31.12.2008 |
ex392099 59 |
45 |
Iridescent film of polyester, polyethylene and an ethylene-vinyl acetate copolymer |
0 % |
1.1.2008-31.12.2008 |
ex392099 59 |
50 |
Polytetrafluoroethylene film, non-microporous, in the form of rolls, of a thickness of 0,019 mm or more but not exceeding 0,14 mm, impermeable to water vapour |
0 % |
1.1.2008-31.12.2008 |
ex392099 59 |
55 |
Ion-exchange membranes of fluorinated plastic material |
0 % |
1.1.2008-31.12.2008 |
ex392099 59 |
60 |
Film of a vinyl alcohol copolymer, soluble in cold water, of a thickness of 34 μm or more but not exceeding 90 μm, a tensile strength at break of 20 MPa or more but not exceeding 45 MPa and an elongation at break of 250 % or more but not exceeding 900 % |
0 % |
1.1.2008-31.12.2008 |
ex392099 90 |
10 |
Biodegradeable sheet of a thickness not exceeding 1 mm containing by weight: — 90 % (±5 %) starch, — 10 % (±5 %)of a synthetic polymer, — 0,5 % (±0,5 %) of stearic acid |
0 % |
1.1.2008-31.12.2008 |
ex392099 90 |
20 |
Anisotropic conductive film, in rolls, of a width of 1,5 mm or more but not exceeding 2 mm and a maximum length of 300 m, used for joining electronic components in the production of LCD displays |
0 % |
1.1.2008-31.12.2011 |
ex392113 10 |
10 |
Sheet of polyurethane foam, of a thickness of 3 mm (±15 %) and of a specific gravity of 0,09435 or more but not exceeding 0,10092 |
0 % |
1.1.2008-31.12.2008 |
ex392114 00 |
10 |
Cellular film of regenerated cellulose, of a thickness not exceeding 350 μm |
0 % |
1.1.2008-31.12.2008 |
ex392119 00 |
91 |
Microporous polypropylene film of a thickness not exceeding 100 μm |
0 % |
1.1.2008-31.12.2008 |
ex392119 00 |
92 |
Microporous film consisting of mixtures of cellulose acetate and cellulose nitrate, of a thickness not exceeding 200 μm |
0 % |
1.1.2008-31.12.2008 |
ex392119 00 |
93 |
Strip of microporous polytetrafluoroethylene on a support of a non-woven, for use in the manufacture of filters for kidney dialysis equipment (1) |
0 % |
1.1.2008-31.12.2008 |
ex392119 00 |
94 |
Polyethylene film, of a thickness of 16 μm or more but not exceeding 24 μm, having: — a weight of 19 g/m2 (±2 g/m2), — a water vapour transmission rate of 5 000 g/m2 or more but not exceeding 30 000 g/m2 per day (as determined by the ASTM D 6701-01 method), — an elongation in the transverse direction of 25 % or more at a load of 500 g or less, — an elongation in the machine direction of 50 % or more but not exceeding 100 % (as determined by the ASTM D 882-91 method), for use in the manufacture of napkins and napkin liners for babies and similar sanitary articles (1) |
0 % |
1.1.2008-31.12.2008 |
ex392119 00 |
95 |
Film of polyethersulfone, of a thickness not exceeding 200 μm |
0 % |
1.1.2008-31.12.2008 |
ex392119 00 |
96 |
Cellular film, consisting of a layer of polyethylene of a thickness of 90 μm or more but not exceeding 140 μm and a layer of regenerated cellulose of a thickness of 10 μm or more but not exceeding 40 μm |
0 % |
1.1.2008-31.12.2008 |
ex392190 19 |
35 |
Composite plate of polycarbonate and poly(butylene terephthalate), reinforced with glass fibres |
0 % |
1.1.2008-31.12.2008 |
ex392190 19 |
45 |
Composite plate of poly(ethylene terephthalate) or of poly(butylene terephthalate), reinforced with glass fibres |
0 % |
1.1.2008-31.12.2008 |
ex392190 60 ex540771 00 ex590390 99 |
91 20 10 |
Woven polytetrafluoroethylene fabric, coated or covered with a copolymer of tetrafluoroethylene and trifluoroethylene having perfluorinated alkoxy side-chains ending in carboxylic acid or sulfonic acid groups, whether or not in the potassium or sodium salt form |
0 % |
1.1.2008-31.12.2008 |
ex392190 60 |
92 |
Reinforced polypropylene sheet, of a thickness of 0,91 mm or more but not exceeding 1,12 mm, having a breaking strength of 890 N or more but not exceeding 1 500 N (as determined by the ASTM D 751 method), in rolls of a width of 3,81 m |
0 % |
1.1.2008-31.12.2008 |
ex392190 60 |
93 |
Film, of a specular gloss of 30 or more but not exceeding 60 measured at an angle of 60° using a glossmeter (as determined by the ISO 2813:2000 method), consisting of a layer of poly(ethylene terephthalate) and a layer of colored poly(vinyl chloride), joined by a metallized adhesive coating, for coating panels and doors of a kind used in the manufacture of domestic appliances (1) |
0 % |
1.1.2008-31.12.2008 |
ex392690 92 |
20 |
Reflecting sheeting or tape, consisting of a facing-strip of poly(vinyl chloride) embossed in a regular pyramidal pattern, heat-sealed in parallel lines or in a grid-pattern to a backing-strip of plastic material, or of knitted or woven fabric covered on one side with plastic material |
0 % |
1.1.2008-31.12.2008 |
ex392690 97 |
10 |
Microspheres of polymer of divinylbenzene, of a diameter of 4,5 μm or more but not exceeding 80 μm |
0 % |
1.1.2008-31.12.2008 |
ex392690 97 |
15 |
Glass fibre reinforced plastic traverse leaf spring for use in the manufacture of motor vehicle suspension systems (1) |
0 % |
1.1.2008-31.12.2008 |
ex392690 97 |
20 |
Tape pad, for use in the manufacture of goods of heading No 8523 (1) |
0 % |
1.1.2008-31.12.2008 |
ex392690 97 |
25 |
Unexpansible microspheres of a copolymer of acrylonitrile, methacrylonitrile and isobornyl methacrylate, of a diameter of 3 μm or more but not exceeding 4,6 μm |
0 % |
1.1.2008-31.12.2008 |
ex392690 97 |
30 |
Guide pin and pole, for use in the manufacture of goods of subheading 8523 29 15 (1) |
0 % |
1.1.2008-31.12.2008 |
ex392690 97 |
35 |
Microspheres of polyalkylsiloxane, on which are covalently bonded organic compounds, of a diameter of 1 μm or more but not exceeding 30 μm |
0 % |
1.1.2008-31.12.2008 |
ex392690 97 |
40 |
Hollow microspheres of a copolymer of isooctylacrylate and acrylic acid, having a diameter of 10 μm or more but not exceeding 1 000 μm, dispersed in water |
0 % |
1.1.2008-31.12.2008 |
ex392690 97 |
55 |
Flat product of polyethylene, perforated in opposing directions, of a thickness of 600 μm or more but not exceeding 1 200 μm and of a weight of 21 g/m2 or more but not exceeding 42 g/m2 |
0 % |
1.1.2008-31.12.2008 |
ex400700 00 |
10 |
Siliconated vulcanised rubber thread and cord |
0 % |
1.1.2008-31.12.2008 |
ex400811 00 |
10 |
Blocks or sheets of cellular vulcanised rubber of modified ethylene-propylene-diene (EPDM) blended with chloroprene, which satisfy the Underwriters Laboratories Flammability Standard UL94HF-1 |
0 % |
1.1.2008-31.12.2008 |
ex401699 99 |
20 |
Soft rubber sealing stoppers for the manufacture of electrolytic capacitors (1) |
0 % |
1.1.2008-31.12.2008 |
4105 10 10 4105 10 90 4105 30 91 4105 30 99 |
Sheep or lamb skin leather, without wool on, tanned or retanned but not further prepared, whether or not split, other than leather of heading No 4114 |
0 % |
1.1.2008-31.12.2008 |
|
4106 21 10 4106 21 90 4106 22 90 |
Goat or kid skin leather, without hair on, tanned or retanned but not further prepared, whether or not split, other than leather of heading No 4114 |
0 % |
1.1.2008-31.12.2008 |
|
4106 31 10 4106 31 90 4106 32 10 4106 32 90 4106 40 90 4106 91 00 4106 92 00 |
Leather of other animals, without hair on, not further prepared than tanned, other than leather of heading No 4114 |
0 % |
1.1.2008-31.12.2008 |
|
ex500400 10 |
10 |
Silk yarn (other than yarn spun from silk waste) not put up for retail sale, unbleached, scoured or bleached, entirely of silk |
0 % |
1.1.2008-31.12.2011 |
ex500400 90 |
10 |
Yarn spun entirely from silk, not put up for retail sale |
2,5 % |
1.1.2008-31.12.2011 |
ex500500 10 ex500500 90 |
10 10 |
Yarn spun entirely from silk waste (noil), not put up for retail sale |
0 % |
1.1.2008-31.12.2008 |
ex520531 00 |
10 |
Six ply yarn of bleached cotton, measuring 925 dtex or more but not more than 989 dtex per single yarn, for the manufacture of tampons (1) |
0 % |
1.1.2008-31.12.2008 |
5208 11 10 |
Fabrics for the manufacture of bandages, dressings and medical gauzes |
5,2 % |
1.1.2008-31.12.2008 |
|
ex540245 00 |
10 |
Polyamide yarn, not textured, untwisted or with a twist not exceeding 22 turns per metre, of crimpable bicomponent filaments consisting of poly(hexamethylene adipamide) with a copolyamide, for the manufacture of: — knee-length stockings of subheadings 6115 10 90, 6115 30 11 and 6115 96 10, — women's stockings of subheadings 6115 30 19 and 6115 96 91 or — panty hose (tights) of subheading 6115 21 00 (1) |
0 % |
1.1.2008-31.12.2008 |
ex540245 00 |
20 |
Yarn of synthetic textile fibres solely of aromatic polyamides obtained by the polycondensation of m-phenylenediamine and isophthalic acid |
0 % |
1.1.2008-31.12.2008 |
ex540247 00 |
10 |
Synthetic bicomponent filament yarn, not textured, untwisted, measuring 1 650 decitex or more but not more than 1 800 decitex, consisting of 110 filaments or more but not more than 120 filaments, each having a core of poly(ethylene terephthalate) and a skin of polyamide-6, containing by weight 75 % or more but not exceeding 77 % of poly(ethylene terephthalate), for use in the manufacture of roofings (1) |
0 % |
1.1.2008-31.12.2011 |
ex540249 00 ex540269 90 |
10 20 |
Multifilaments yarn of polytetrafluoroethylene |
0 % |
1.1.2008-31.12.2008 |
ex540249 00 |
30 |
Yarn of a copolymer of glycollic acid with lactic acid, for the manufacture of surgical sutures (1) |
0 % |
1.1.2008-31.12.2008 |
ex540249 00 ex540259 90 ex540269 90 |
50 20 40 |
Non-textured filament yarn of poly(vinyl alcohol) |
0 % |
1.1.2008-31.12.2008 |
ex540249 00 ex540269 90 |
60 10 |
Yarn wholly of poly(glycollic acid) |
0 % |
1.1.2008-31.12.2008 |
ex540249 00 |
70 |
Synthetic filament yarn, single, containing by weight 85 % or more of acrylonitrile, in the form of a wick containing 1 000 continuous filaments or more but not more than 25 000 continuous filaments, of a weight per metre of 0,12 g or more but not exceeding 3,75 g and of a length of 100 m or more, for the manufacture of carbon-fibre yarn (1) |
0 % |
1.1.2008-31.12.2008 |
ex540249 00 |
80 |
Polyethylene filament yarn, untwisted, of either 55, 110, 165 or 1 760 decitex, for the manufacture of goods of heading No 5607 (1) |
0 % |
1.1.2008-31.12.2008 |
ex540419 00 |
10 |
Monofilament of polytetrafluoroethylene |
0 % |
1.1.2008-31.12.2008 |
ex540419 00 |
20 |
Monofilament of poly(1,4-dioxanone) |
0 % |
1.1.2008-31.12.2008 |
ex540419 00 |
30 |
Monofilament of a copolymer of 1,3-dioxan-2-one with 1,4-dioxan-2,5-dione, for the manufacture of surgical sutures (1) |
0 % |
1.1.2008-31.12.2008 |
ex540419 00 |
40 |
Monofilaments of a stabilised blend of polyester with polyurethane, of 67 decitex or more and of which no cross-sectional dimension exceeds 1 mm |
0 % |
1.1.2008-31.12.2008 |
ex540419 00 |
50 |
Monofilaments of polyester or poly(butylene terephthalate), with crosssectional dimension of 0,5mm or more but not exceeding 1mm, for use in the manufacture of zippers (1) |
0 % |
1.1.2008-31.12.2008 |
ex540490 90 |
20 |
Strip of polyimide |
0 % |
1.1.2008-31.12.2008 |
(4)ex540710 00 |
10 |
Textile fabric, consisting of warp filament yarns of polyamide-6,6 and weft filament yarns of polyamide-6,6, polyurethane and a copolymer of terephthalic acid, p-phenylenediamine and 3,4’-oxybis (phenyleneamine) |
0 % |
1.1.2008-31.12.2012 |
ex540771 00 |
10 |
Woven fabrics of poly(vinyl alcohol) fibres, for machine embroidery |
0 % |
1.1.2008-31.12.2008 |
ex550190 00 |
10 |
Poly(vinyl alcohol) tow |
0 % |
1.1.2008-31.12.2008 |
ex550311 00 ex560130 00 |
10 40 |
Synthetic staple fibres of a copolymer of terephthalic acid, p-phenylenediamine and 3,4’-oxybis(phenyleneamine), of a length not exceeding 7 mm |
0 % |
1.1.2008-31.12.2008 |
ex550390 10 ex550390 90 |
10 30 |
Acetalized, multicomponent spun fibres with a matrix fibril structure, consisting of emulsion-polymerized poly(vinyl alcohol) and poly(vinyl chloride) |
0 % |
1.1.2008-31.12.2008 |
ex550390 90 ex550690 90 ex560130 00 |
20 10 10 |
Poly(vinyl alcohol) fibres, whether or not acetalized |
0 % |
1.1.2008-31.12.2008 |
ex560130 00 |
20 |
Polyester fibres, measuring 0,56 decitex, of a length of 3 mm or more but not exceeding 5 mm |
0 % |
1.1.2008-31.12.2008 |
ex560130 00 |
30 |
Acrylic fibres, measuring 0,11 and 0,56 decitex, of a length of 3 mm or more but not exceeding 5 mm |
0 % |
1.1.2008-31.12.2008 |
ex560311 10 ex560311 90 ex560312 10 ex560312 90 ex560391 10 ex560391 90 ex560392 10 ex560392 90 |
10 10 10 10 10 10 10 10 |
Poly(vinyl alcohol) non-wovens, in the piece or cut into rectangles: — of a thickness of 200 μm or more but not exceeding 280 μm and — of a weight of 20 g/m2 or more but not exceeding 50 g/m2 |
0 % |
1.1.2008-31.12.2008 |
ex560311 10 ex560311 90 ex560312 10 ex560312 90 |
20 20 20 50 |
Non-wovens, containing spunbonded fibres of polypropylene or of polypropylene and polyethylene, for the manufacture of napkins and napkin liners for babies and similar sanitary articles (1) |
0 % |
1.1.2008-31.12.2008 |
ex560312 90 ex560313 90 ex560314 90 ex560392 90 ex560393 90 ex560394 90 |
30 30 10 60 40 30 |
Non-wovens of aromatic polyamide fibres obtained by polycondensation of m-phenylenediamine and isophthalic acid, in the piece or cut into rectangles |
0 % |
1.1.2008-31.12.2008 |
ex560312 90 ex560313 90 |
60 60 |
Non-woven of spunbonded polyethylene, of a weight of more than 60 g/m2 but not exceeding 80 g/m2 and an air resistance (Gurley) of 8 s or more but not exceeding 36 s (as determined by the ISO 5636/5 method) |
0 % |
1.1.2008-31.12.2008 |
ex560312 90 ex560313 90 ex560392 90 ex560393 90 |
70 70 40 10 |
Non-wovens of polypropylene, consisting of a meltblown layer, laminated on each side with spunbonded filaments of polypropylene, of a thickness not exceeding 550 μm and of a weight not exceeding 80 g/m2, in the piece or simply cut into squares or rectangles, not impregnated |
0 % |
1.1.2008-31.12.2008 |
ex560313 90 ex560314 90 |
40 20 |
Non-wovens consisting of a central layer of polycarbonate fibres, laminated on each side with spunbonded filaments of polyester, of a weight of more than 130 g/m2 but not exceeding 200 g/m2 |
0 % |
1.1.2008-31.12.2008 |
ex560313 90 ex560393 90 |
80 30 |
Polyethylene non-woven, covered on both sides with a non-woven of polypropylene and wood pulp, of a weight of 70 g/m2 or more but not exceeding 90 g/m2, in rolls, for use in the manufacture of wet wipes (1) |
0 % |
1.1.2008-31.12.2008 |
ex560314 90 |
30 |
Non-wovens, consisting of a central elastomeric film laminated on each side with spunbonded filaments of polypropylene, of a weight of 200 g/m2 or more but not exceeding 300 g/m2 |
0 % |
1.1.2008-31.12.2008 |
ex560391 90 |
30 |
Nonwoven viscose rayon, with a watersoluble starch based binder and having a weight of 12 or more but not more than 18g/m 2 |
0 % |
1.1.2008-31.12.2008 |
ex560392 90 ex560393 90 |
20 20 |
Non-wovens consisting of a meltblown central layer of a thermoplastic elastomer laminated on each side with spunbonded filaments of polypropylene |
0 % |
1.1.2008-31.12.2008 |
ex560392 90 |
50 |
Non-wovens of staple fibres, in rolls, of a width of 78 mm or more but not exceeding 252 mm, for the manufacture of floppy discs (1) |
0 % |
1.1.2008-31.12.2008 |
ex560392 90 ex560393 90 ex560394 90 |
70 50 40 |
Non-wovens, consisting of multiple layers of a mixture of meltblown fibres and staple fibres of polypropylene and polyester, whether or not laminated on one side or on both sides with spunbonded filaments of polypropylene, of a total thickness not exceeding 50 mm |
0 % |
1.1.2008-31.12.2008 |
ex560394 90 |
20 |
Acrylic fibre rods, having a length of not more than 50 cm, for the manufacture of pen tips (1) |
0 % |
1.1.2008-31.12.2008 |
ex560490 90 |
60 |
Strip, of: — a polyester layer, laminated on one or both sides to a polymer layer containing glass beads, — a maximum width of 1,2 mm, — a maximum thickness of 0,05 mm |
0 % |
1.1.2008-31.12.2008 |
ex560750 90 |
10 |
Twine, unsterilised, wholly of poly(glycollic acid), plaited or braided, with an inner core, for the manufacture of surgical sutures (1) |
0 % |
1.1.2008-31.12.2008 |
ex580300 10 |
91 |
Gauze of cotton, of a width of less than 1 500 mm |
0 % |
1.1.2008-31.12.2008 |
ex590310 90 ex590320 90 ex590390 99 |
10 10 20 |
Knitted or woven fabrics, coated or covered on one side with artificial plastic material in which are embedded microspheres |
0 % |
1.1.2008-31.12.2008 |
ex590320 90 |
20 |
Tape of polyester fabric laminated with a metallised polyurethane film containing glass beads, for use in the manufacture of marine life-saving equipment (1) |
0 % |
1.1.2008-31.12.2008 |
ex590699 90 |
10 |
Rubberised textile fabric, consisting of warp yarns of polyamide-6,6 and weft yarns of polyamide-6,6, polyurethane and a copolymer of terephthalic acid, p-phenylenediamine and 3,4’-oxybis(phenyleneamine) |
0 % |
1.1.2008-31.12.2008 |
(4)ex590700 90 |
10 |
Textile fabrics, coated with adhesive in which are embedded spheres of a diameter not exceeding 150 μm |
0 % |
1.1.2008-31.12.2011 |
ex591110 00 |
10 |
Needle-punched synthetic-fibre felts, not containing polyester, whether or not containing catalytic particles entrapped within the synthetic fibres, coated or covered on one side with polytetrafluoroethylene film, for the manufacture of filtration products (1) |
0 % |
1.1.2008-31.12.2008 |
ex591190 90 |
10 |
Yarn and strip of impregnated polytetrafluoroethylene, whether or not oiled or graphited |
0 % |
1.1.2008-31.12.2008 |
ex591190 90 ex842199 00 |
30 92 |
Parts of equipment for the purification of water by reverse osmosis, consisting essentially of plastic-based membranes, supported internally by woven or non-woven textile materials which are wound round a perforated tube, and enclosed in a cylindrical plastic casing of a wall-thickness not exceeding 4 mm, whether or not housed in a cylinder of a wall-thickness of 5 mm or more |
0 % |
1.1.2008-31.12.2008 |
6305 10 10 |
Sacks and bags, of a kind used for the packing of goods, used, of jute or of other textile bast fibres of heading No 5303 |
0 % |
1.1.2008-31.12.2008 |
|
ex630590 00 ex630590 00 ex630590 00 |
10 93 95 |
Sacks and bags, of a kind used for the packing of goods, used, of flax or of sisal |
0 % |
1.1.2008-31.12.2008 |
ex680510 00 ex680520 00 ex680530 80 |
10 10 10 |
Abrasive in the form of identically shaped particles on a support |
0 % |
1.1.2008-31.12.2008 |
ex681389 00 |
10 |
Friction material, of a thickness of less than 20 mm, not mounted, for the manufacture of friction components of a kind used in automatic transmissions and clutches (1) |
0 % |
1.1.2008-31.12.2008 |
ex690320 90 ex691490 90 |
10 10 |
Yarn of continuous ceramic filaments, each filament containing by weight: — 12 % or more of diboron trioxide, — 26 % or less of silicon dioxide and — 60 % or more of dialuminium trioxide |
0 % |
1.1.2008-31.12.2008 |
ex690390 90 ex690919 00 |
10 40 |
Beryllium oxide, of a purity by weight of more than 99 %, in the form of blanks, bars, blocks or plates |
0 % |
1.1.2008-31.12.2008 |
ex690390 90 |
20 |
Silicon carbide reactor tubes and holders, of a kind used for insertion into diffusion and oxidation furnaces for production of semiconductor materials |
0 % |
1.1.2008-31.12.2008 |
ex690912 00 |
20 |
Plate, of dialuminium trioxide and titanium carbide, of dimensions not exceeding 48 × 48 mm, or of a diameter not exceeding 125 mm, for the manufacture of magnetic heads (1) |
0 % |
1.1.2008-31.12.2008 |
ex690919 00 |
30 |
Supports for catalysts, consisting of porous cordierite or mullite ceramic pieces, of an overall volume not exceeding 65 l, having, per cm2 of the cross-section, not less than one continuous channel which may be open at both ends or stopped at one end |
0 % |
1.1.2008-31.12.2008 |
ex690919 00 ex691490 90 |
50 20 |
Ceramic articles made of continuous filaments of ceramic oxides, containing by weight: — 2 % or more of diboron trioxide, — 28 % or less of silicon dioxide and — 60 % or more of dialuminium trioxide |
0 % |
1.1.2008-31.12.2008 |
ex690919 00 |
60 |
Supports for catalysts, consisting of porous ceramic pieces, of a blend of silicon carbide and silicon, with a hardness of less than 9 on the Mohs scale, with a total volume not exceeding 65 liters, having per cm2 of the surface of the cross section one or more closed channels at the tail end |
0 % |
1.1.2008-31.12.2008 |
ex691490 90 |
30 |
Ceramic microspheres, transparent, obtained from silicon dioxide and zirconium dioxide, of a diameter of more than 125 μm |
0 % |
1.1.2008-31.12.2008 |
(4)ex700210 00 |
10 |
Balls of E-glass, of a diameter of 18,5 mm or more but not exceeding 26 mm |
0 % |
1.1.2008-31.12.2008 |
ex700600 90 |
10 |
Glass plate, coated on one side with chromium and/or with a mixture of diindium trioxide and tin dioxide, of dimensions of 260 × 320 mm or more but not exceeding 400 × 400 mm, of a thickness not exceeding 1,2 mm, for the manufacture of liquid crystal displays (1) |
0 % |
1.1.2008-31.12.2008 |
ex700600 90 |
20 |
Colour filter, consisting of a glass plate with red, blue and green pixels, having a total thickness of 1,1 mm (0,1 mm) and exterior dimensions of 320 × 352 mm or more but not exceeding 320 × 400 mm, for the manufacture of liquid crystal displays (1) |
0 % |
1.1.2008-31.12.2008 |
ex700600 90 |
30 |
Glass plate, uncoated, of dimensions of 320 × 352 mm or more but not exceeding 320 × 400 mm, of a thickness of 0,6 mm or more but not exceeding 1,2 mm, for the manufacture of liquid crystal displays (1) |
0 % |
1.1.2008-31.12.2008 |
(4)ex700600 90 |
50 |
Glass plate of a diagonal size of 81 cm or more, but not exceeding 186 cm, provided either with a mesh film or a sputtered conductive layer for EMC shielding and a near-infrared absorbing film, with optional additional anti-reflex/colour enhancement layers on one or two sides, for use in the manufacture of products falling within heading 8528 (1) |
0 % |
1.1.2008-31.12.2012 |
(4)ex700719 20 |
10 |
Glass plate of a diagonal size of 81,28 cm (-1,5 cm) or more, but not exceeding 185,42 cm (-1,5 cm), consisting of tempered glass; provided either with a mesh film and a near-infrared absorbing film or a sputtered conductive layer, with optional additional anti-reflex layer on one or two sides, for use in the manufacture of products falling within heading 8528 (1) |
0 % |
1.1.2008-31.12.2008 |
(4)ex700729 00 |
10 |
Glass plate of a diagonal size of 81,28 cm (-1,5cm) or more, but not exceeding 185,42 cm (-1,5 cm), consisting of 2 sandwich plates laminated together; provided either with a mesh film and a near-infrared absorbing film or a sputtered conductive layer, with optional additional anti-reflex layer on one or two sides, for use in the manufacture of products falling within heading 8528 (1) |
0 % |
1.1.2008-31.12.2008 |
ex701110 00 |
10 |
Glass lenses with a stippled front refractor or with a front refractor composed of prismatic elements, with an external diameter of more than 121 mm but not exceeding 125 mm |
0 % |
1.1.2008-31.12.2008 |
ex701110 00 ex701190 00 |
20 10 |
Parabolic glass cup, with an external diameter of more than 121 mm but not exceeding 125 mm |
0 % |
1.1.2008-31.12.2008 |
ex701120 00 |
20 |
Glass cone (funnel) for cathode-ray tube with a diagonal measurement of 508,8 mm or more but not more than 811,0 mm |
0 % |
1.1.2008-31.12.2011 |
ex701120 00 |
25 |
Glass cone for cathode-ray tube, of a diagonal measurement of 912 mm (±5 mm) and a distance from seal edge to the end of the neck of 454,3 mm (±5 mm) |
0 % |
1.1.2008-31.12.2008 |
ex701120 00 |
40 |
Glass face-plate: — with a diagonal measurement of 366,4 mm (-1,5 mm) and of dimensions of 246,4 × 315,4 mm (-1,5 mm), — with a diagonal measurement of 391 mm (-1,5 mm) and of dimensions of 261,4 × 326,8 mm (-1,5 mm), — with a diagonal measurement of 442 mm (-1,5 mm) and of dimensions of 293,4 × 369,2 mm (-1,5 mm), — with a diagonal measurement of 544,5 mm (-1,6 mm) and of dimensions of 358 × 454 mm (-1,6 mm), having a cylindrical curvature, — with a diagonal measurement of 570,5 mm (-1,6 mm) and of dimensions of 360 × 486 mm (-1,6 mm), — with a diagonal measurement of 629,8 mm (±3 mm) and of dimensions of 406,5 × 519 mm (±2 mm), having a cylindrical curvature, or — with a diagonal measurement of 753 mm (-1,6 mm) and of dimensions of 471 × 640 mm (-1,6 mm), — and — with a raised edge, for the manufacture of colour cathode-ray tubes (1) |
0 % |
1.1.2008-31.12.2008 |
ex701120 00 |
50 |
Glass face plate with — a light transmission of 52,5 % (±5 %) at a glass thickness of 11,43 mm and — a diagonal measurement of 512,1 mm or more but not more than 814,2 mm and — dimensions of 341,8 × 440,5 × 94,1 mm (-1,4 mm) or 359,4 × 454,8 × 80,0 mm (-1,4 mm) or 358,0 × 454,0 × 90,0 (-1,4 mm) or 359,4 × 454,8 × 72,0 (-1,4 mm) or 396,0 × 633,0 × 103,7 mm (-1,4 mm) or 472,7 × 600,8 × 97,6 mm (-1,4 mm) or 472,7 × 600,8 × 84,5 mm (-1,4 mm) or 445,0 × 726,1 × 112,5 mm (-1,4 mm) or 445,0 × 726,1 × 93,0 mm (-1,4 mm) |
0 % |
1.1.2008-31.12.2011 |
ex701120 00 |
75 |
Glass face-plate: — with a diagonal measurement of 604,5 mm (±3 mm) and of dimensions of 340 × 541 mm (±2 mm), — with a diagonal measurement of 639,3 mm (±3 mm) and of dimensions of 413,6 × 527 mm (±2 mm), — with a diagonal measurement of 708 mm (±3 mm) and of dimensions of 404 × 633 mm (±2 mm), — with a diagonal measurement of 723 mm (±3 mm) and of dimensions of 477 × 602 mm (±2 mm), or — with a diagonal measurement of 812,8 mm (±3 mm) and of dimensions of 463,8 × 725,5 mm (±2 mm), having a cylindrical curvature, for the manufacture of colour cathode-ray tubes (1) |
0 % |
1.1.2008-31.12.2008 |
ex701120 00 |
80 |
Glass bulb for monochrome cathode-ray tube, of a diagonal measurement of 3,8 cm or more but not exceeding 51 cm and a nominal neck diameter of 13 mm, 20 mm, 29 mm or 37 mm |
0 % |
1.1.2008-31.12.2008 |
ex701400 00 |
10 |
Optical elements of glass (other than those of heading No 7015), not optically worked, other than signalling glassware |
0 % |
1.1.2008-31.12.2008 |
ex701912 00 |
10 |
Rovings, measuring 2 600 tex or more but not more than 3 300 tex and of a loss on ignition of 4 % or more but not exceeding 8 % by weight (as determined by the ASTM D 2584-94 method) |
0 % |
1.1.2008-31.12.2008 |
ex701912 00 |
15 |
Rovings, measuring 650 tex or more but not more than 2 500 tex, coated with a layer of polyurethane whether or not mixed with other materials |
0 % |
1.1.2008-31.12.2008 |
ex701912 00 |
30 |
Rovings, measuring 1 693 tex (±10 %), coated with a layer of styrene-butadiene rubber (SBR) |
0 % |
1.1.2008-31.12.2008 |
ex701912 00 |
40 |
Rovings, measuring 2 040 tex (±10 %), coated with carbon |
0 % |
1.1.2008-31.12.2008 |
ex701912 00 |
50 |
Rovings, measuring 392 tex or more but not more than 2 884 tex, coated with a layer of an acrylic copolymer |
0 % |
1.1.2008-31.12.2008 |
ex701912 00 |
60 |
Rovings, measuring 517 tex or more but not more than 3 569 tex, coated with a layer of paraffin |
0 % |
1.1.2008-31.12.2008 |
ex701912 00 |
70 |
Rovings, measuring 417 tex or more but not more than 3 180 tex, coated with a layer of poly(sodium acrylate) and poly(acrylic acid) |
0 % |
1.1.2008-31.12.2008 |
ex701919 10 |
10 |
Yarn of 33 tex or a multiple thereof (-7,5 %), obtained from continuous spun-glass filaments of a nominal diameter of 3,5 μm or of 4,5 μm, in which filaments of a diameter of 3 μm or more but not exceeding 5,2 μm predominate, other than those treated so as to improve their adhesion to elastomers |
0 % |
1.1.2008-31.12.2008 |
ex701919 10 |
30 |
Yarn of 22 tex (-7,5 %), obtained from continuous spun-glass filaments of a nominal diameter of 5 μm, in which filaments of a diameter of 4,2 μm or more but not exceeding 5,8 μm predominate |
0 % |
1.1.2008-31.12.2008 |
ex701919 10 |
50 |
Yarn of E-glass of 68 or 74 tex (±7 %), obtained from continuous spun-glass filaments of a nominal diameter of 9 μm, in which filaments of a diameter of 8,1 μm or more but not exceeding 9,9 μm predominate, for the manufacture of woven fabrics for electrical laminates (prepregs) (1) |
0 % |
1.1.2008-31.12.2008 |
ex701939 00 |
30 |
Sheet, consisting of a layer of glass fibres and polypropylene, containing by weight 40 % or more but not more than 60 % of glass fibres of a length of 12,7 mm (0,2 mm) and a diameter of 16 μm (±1 μm), covered on one side with a plastic film and on the other side with a plastic layer, of a total thickness not exceeding 1 mm |
0 % |
1.1.2008-31.12.2008 |
ex701939 00 |
40 |
Sheet, consisting of chopped glass fibres and thermoplastic polymer, containing by weight 30 % or more but not more than 70 % of glass fibres of a diameter of 16 μm (±1 μm), whether or not covered on one or both sides with a protective plastic layer |
0 % |
1.1.2008-31.12.2008 |
ex701939 00 |
50 |
Non-woven product of non-textile glass fibre, for the manufacture of air filters (1) |
0 % |
1.1.2008-31.12.2011 |
ex701990 10 |
10 |
Non-textile glass fibres in which fibres of a diameter of less than 4,6 μm predominate |
0 % |
1.1.2008-31.12.2008 |
ex701990 10 |
20 |
Non-textile E-glass fibres, of a length not exceeding 3 mm and a diameter of 5 μm, for the manufacture of catalysts for the purification of smokes (1) |
0 % |
1.1.2008-31.12.2008 |
ex701990 99 |
10 |
Glass cord impregnated with rubber or plastic, obtained from twisted glass filament yarns, coated with a latex comprising at least a resorcinol-formaldehyde resin and chlorosulfonated polyethylene |
0 % |
1.1.2008-31.12.2008 |
ex701990 99 |
20 |
Glass cord impregnated with rubber or plastic, obtained from twisted glass filament yarns, coated with a latex comprising at least a resorcinol-formaldehyde-vinylpyridine resin and an acrylonitrile-butadiene rubber (NBR) |
0 % |
1.1.2008-31.12.2008 |
ex701990 99 |
30 |
High modulus glass cord (K) impregnated with rubber, obtained from twisted high modulus glass filament yarns, coated with a latex comprising a resorcinol-formaldehyde resin with or without vinylpyridine and/or hydrogenated acrylonitrile-butadiene rubber (HNBR) |
0 % |
1.1.2008-31.12.2008 |
ex711620 90 |
10 |
Disc of silicon on sapphire |
0 % |
1.1.2008-31.12.2008 |
ex720110 11 |
10 |
Pig iron ingots with a length of not more than 350 mm, a width of not more than 150 mm, a height of not more than 150 mm |
0 % |
1.1.2008-31.12.2011 |
ex720110 30 |
10 |
Pig iron ingots with a length of not more than 350 mm, a width of not more than 150 mm, a height of not more than 150 mm, containing by weight not more than 1 % of silicon |
0 % |
1.1.2008-31.12.2011 |
7202 50 00 |
Ferro-silico-chromium |
0 % |
1.1.2008-31.12.2008 |
|
ex720299 80 |
10 |
Ferro-silicon, nitrided, containing by weight 55 % or more of silicon and 25 % or more of nitrogen |
0 % |
1.1.2008-31.12.2008 |
ex732620 80 |
20 |
Metal fleece, consisting of a mass of stainless steel wires of diameters ranging from 0,022 mm to 0,070 mm, compacted by sintering and rolling |
0 % |
1.1.2008-31.12.2011 |
ex740919 00 |
10 |
Sheet or plate of polytetrafluoroethylene, with aluminium oxide or titanium dioxide as a filler or reinforced with glass-fibre fabric, laminated on both sides with copper foil |
0 % |
1.1.2008-31.12.2008 |
ex741021 00 |
10 |
Sheet or plate of polytetrafluoroethylene, containing aluminium oxide or titanium dioxide as filler or reinforced with glass-fibre fabric, covered on both sides with copper foil |
0 % |
1.1.2008-31.12.2008 |
ex741021 00 |
40 |
Sheet or plates — consisting of a central layer of paper, laminated on each side with glass-fibre fabric and impregnated with epoxide resin, or — consisting of multiple layers of paper, impregnated with phenolic resin, coated on one or both sides with a copper film with a maximum thickness of 0,15 mm |
0 % |
1.1.2008-31.12.2008 |
ex741999 90 ex761699 90 |
91 60 |
Disc (target) with deposition material, consisting of molybdenum silicide: — containing 1 mg/kg or less of sodium and — mounted on a copper or aluminium support |
0 % |
1.1.2008-31.12.2008 |
ex741999 90 ex761699 90 |
92 70 |
Disc (target) with deposition material, of tungsten or an alloy containing by weight 90 % of tungsten and 10 % of titanium: — containing 100 μg/kg or less of sodium and — mounted on a copper or aluminium support |
0 % |
1.1.2008-31.12.2008 |
ex741999 90 ex761699 90 |
93 80 |
Disc (target) with deposition material, of titanium: — containing 50 μg/kg or less of sodium and — mounted on a copper or aluminium support |
0 % |
1.1.2008-31.12.2008 |
(4)ex760120 99 |
10 |
Sheets and billets of secondary aluminium alloy containing lithium |
0 % |
1.1.2008-31.12.2012 |
ex760519 00 |
10 |
Not alloyed aluminium wire, of a diameter of 2 mm or more but not exceeding 6 mm, covered with a layer of copper of a thickness of 0,032 mm or more but not exceeding 0,117 mm |
0 % |
1.1.2008-31.12.2008 |
ex760611 10 |
20 |
Tape of not alloyed aluminium, with a reflecting film, a transparent polyurethane topcoat, a netting and ceramic anti-skid particles |
0 % |
1.1.2008-31.12.2008 |
ex760611 91 ex760611 93 |
20 20 |
Strip with depth-etching, of band-anodic oxidation treated aluminium of a purity by weight of 99,9 % and a thickness of less than 3 mm, for incorporation in bodies for motor vehicles (1) |
0 % |
1.1.2008-31.12.2008 |
ex760711 90 |
10 |
Plain aluminium foil with the following parameters: — an aluminium content of 99,98 % or more — a thickness of 0,070 mm or more but not more than 0,115 mm — with a cubic texture of a kind used for high voltage etching (1) |
0 % |
1.1.2008-31.12.2011 |
(4)ex760720 99 |
10 |
Aluminium laminated film of a total thickness of 0,123 mm (0,010 mm), comprising of a layer of aluminium of a thickness of 0,040 mm (0,002 mm), polyamide and polypropylene base films, and a protective coating against corrosion by hydrofluoric acid, for use in the manufacture of lithium polymer batteries (1) |
0 % |
1.1.2008-31.12.2012 |
ex761300 00 ex870899 97 |
20 10 |
Aluminium container, seamless, for compressed natural gas or compressed hydrogen, wholly embedded in an overwrap of epoxy-carbon fibres composite, of a capacity of 172 l (±10 %) and an unfilled weight not exceeding 64 kg |
0 % |
1.1.2008-31.12.2008 |
ex761699 90 |
15 |
Honeycomb aluminium blocks of the type used in the manufacture of aircraft parts |
0 % |
1.1.2008-31.12.2008 |
ex761699 90 |
50 |
Discs of aluminium alloy, of a thickness not exceeding 0,84 mm, for the manufacture of goods of subheading 8523 29 15 (1) |
0 % |
1.1.2008-31.12.2008 |
ex790500 00 |
10 |
Plate of an alloy of zinc, ground and polished on one surface and coated with an epoxide resin on the other surface, of rectangular or square shape, of a length of 300 mm or more but not exceeding 2 000 mm and of a width of 300 mm or more but not exceeding 1 000 mm, and containing: — 10 mg/kg or less of iron, — 10 mg/kg or less of lead, — 700 mg/kg or more but not more than 900 mg/kg of aluminium and — 500 mg/kg or more but not more than 900 mg/kg of magnesium, for the manufacture of sensitised printing plates (1) |
0 % |
1.1.2008-31.12.2008 |
ex810390 90 |
10 |
Welded tube solely of tantalum, or solely of an alloy of tantalum with tungsten containing by weight 3,5 % or less of tungsten |
0 % |
1.1.2008-31.12.2008 |
8104 11 00 |
Unwrought magnesium, containing at least 99,8 % by weight of magnesium |
0 % |
1.1.2008-31.12.2008 |
|
ex810490 00 |
10 |
Ground and polished magnesium sheets, of dimensions not exceeding 1 500 × 2 000 mm, coated on one side with an epoxy resin insensitive to light |
0 % |
1.1.2008-31.12.2008 |
ex810490 00 |
20 |
Sections, of extruded magnesium, of a length of 800 mm or more but not exceeding 2 900 mm and a width of 15 mm or more but not exceeding 70 mm |
0 % |
1.1.2008-31.12.2008 |
ex810820 00 |
10 |
Titanium sponge |
0 % |
1.1.2008-31.12.2008 |
ex810830 00 |
10 |
Waste and scrap of titanium and titanium alloys, except those containing by weight 1 % or more but not more than 2 % of aluminium |
0 % |
1.1.2008-31.12.2008 |
ex810890 50 |
10 |
Alloy of titanium and aluminium, containing by weight 1 % or more but not more than 2 % of aluminium, in sheets or rolls, of a thickness of 0,49 mm or more but not exceeding 3,1 mm, of a width of 1 000 mm or more but not exceeding 1 254 mm, for the manufacture of goods of subheading 8714 19 00 (1) |
0 % |
1.1.2008-31.12.2008 |
ex810890 50 |
20 |
Alloy of titanium, aluminium and vanadium, containing by weight 2,5 % or more but not more than 3,5 % of aluminium and 2,0 % or more but not more than 3,0 % of vanadium, in sheets or rolls, of a thickness of 0,6 mm or more but not exceeding 0,9 mm, of a width not exceeding 1 000 mm, for the manufacture of goods of subheading 8714 19 00 (1) |
0 % |
1.1.2008-31.12.2008 |
ex810890 50 |
30 |
Alloy of titanium and silicon, containing by weight 0,15 % or more but not more than 0,60 % of silicon, in sheets or rolls, for use in the manufacture of exhaust systems for internal combustion engines (1) |
0 % |
1.1.2008-31.12.2011 |
ex810920 00 |
10 |
Non-alloy zirconium, in the form of ingots, containing by weight more than 0,01 % of hafnium, for use in the manufacture of tubes for the chemical industry (1) |
0 % |
1.1.2008-31.12.2008 |
ex811010 00 |
10 |
Antimony in the form of ingots |
0 % |
1.1.2008-31.12.2008 |
ex811219 00 |
10 |
Beryllium, of a purity by weight of 94 % or more, in the form of bars, plates and sheets |
0 % |
1.1.2008-31.12.2008 |
ex811299 30 |
10 |
Alloy of niobium (columbium) and titanium, in the form of bars and rods |
0 % |
1.1.2008-31.12.2008 |
ex830520 00 |
10 |
Staples of a width of 12 mm (±1 mm) and a depth of 8 mm (±1 mm) for use in copiers and printers (1) |
0 % |
1.1.2008-31.12.2008 |
ex830990 90 |
10 |
Aluminium can ends with so-called ‘ring pull’ full aperture with a diameter of 136,5 mm (±1 mm) |
0 % |
1.1.2008-31.12.2008 |
ex840130 00 |
20 |
Non-irradiated hexagonal fuel modules (elements) for use in nuclear reactors (1) |
0 % |
1.1.2008-31.12.2008 |
ex840731 00 |
10 |
Two stroke internal combustion engine, of a cylinder capacity not exceeding 30 cm3 for use in the manufacture of portable motorised scooters falling within subheading 8711 10 00 (1) |
0 % |
1.1.2008-31.12.2008 |
(4)ex840733 90 ex840790 80 ex840790 90 |
10 10 10 |
Spark-ignition reciprocating or rotary internal combustion piston engines, having a cylinder capacity of not less than 300 cm3 and a power of not less than 6 kW but not exceeding 20,0 kW, for the manufacture of: — self-propelled lawn mowers, with a seat of sub-heading 8433 11 51 — tractors of subheading 8701 90 11, whose main function is that of a lawn mower or — four stroke mowers with motor of a cylinder capacity of not less than 300 cc of subheading 8433 20 10 (1) |
0 % |
1.1.2008-31.12.2011 |
(4)ex840790 10 |
10 |
Four-stroke petrol engines of a cylinder capacity of not more than 250 cm3 for use in the manufacture of lawnmowers of sub-heading 8433 11, mowers with motor of subheading 8433 20 10, rotovators of sub-heading 8432 29 50, garden shredders of sub-heading 8436 80 99 or scarifiers of subheading 8432 29 10 (1) |
0 % |
1.1.2008-31.12.2011 |
ex840790 10 |
20 |
Two-stroke internal combustion engines, having a cylinder capacity not exceeding 125 cm3, for the manufacture of lawnmowers of sub-heading 8433 11 (1) |
0 % |
1.1.2008-31.12.2008 |
ex840890 41 |
20 |
Diesel engines of a power not exceeding 15 kW, with 2 or 3 cylinders, for use in the manufacture of vehicle mounted temperature control systems (1) |
0 % |
1.1.2008-31.12.2008 |
ex840890 43 |
20 |
Diesel engines of a power not exceeding 30 kW, with 4 cylinders, for use in the manufacture of vehicle mounted temperature control systems (1) |
0 % |
1.1.2008-31.12.2008 |
ex841391 00 |
20 |
Manganese-silicon-bronze swash plates with a copper content of 58 % or more but not more than 63 % by weight for incorporation into fluid pumps for air conditioners of motor vehicles |
0 % |
1.1.2008-31.12.2011 |
ex841430 89 |
20 |
Vehicle air conditioning system part, consisting of an open shaft reciprocating compressor of a power exceeding 0,4 kW but not exceeding 10 kW |
0 % |
1.1.2008-31.12.2008 |
ex841459 20 |
20 |
Axial fan of 170 mm (±10 mm) diameter and 50 mm (±0,10 mm) height, for use in the manufacture of products of CN 8525 (1) |
0 % |
1.1.2008-31.12.2008 |
ex841490 00 |
20 |
Aluminium pistons, partially covered with polytetrafluoroethylene, for incorporation into compressors of air conditioning machines of motor vehicles (1) |
0 % |
1.1.2008-31.12.2008 |
ex841490 00 |
30 |
Pressure-regulating system, for incorporation into compressors of air conditioning machines of motor vehicles (1) |
0 % |
1.1.2008-31.12.2008 |
ex841490 00 |
40 |
Drive part, for compressors of air conditioning machines of motor vehicles (1) |
0 % |
1.1.2008-31.12.2008 |
ex841490 00 |
50 |
Cross-flow fan, of 97,4 mm (0,2 mm) diameter and 645 mm (±1 mm) or 873 mm (+0,5/–1 mm) height made from anti-static, anti-bacterial and heat-resistant, glass fiber reinforced plastic with a minimum temperature resistance of 70 °C, for use in the manufacture of indoor air conditioning units (1) |
0 % |
1.1.2008-31.12.2011 |
ex841590 00 |
20 |
Evaporator made of aluminium for use in the manufacture of air conditioning machines for automobiles (1) |
0 % |
1.1.2008-31.12.2011 |
ex841899 90 |
91 |
Welded cooling micro-elements, of an alloy of aluminium, for the manufacture of condensers (1) |
0 % |
1.1.2008-31.12.2008 |
ex841919 00 |
10 |
Heat accumulator for motor vehicles, of a coolant capacity of 4 l or more but not exceeding 10 l |
0 % |
1.1.2008-31.12.2008 |
ex841989 98 |
10 |
Immersion-tube (coils) bundles, consisting of an assembly of plastic tubes terminating at each end in a honeycomb-structure (end-fitting) surrounded by a pipe-connector |
0 % |
1.1.2008-31.12.2008 |
(4)ex841989 98 |
30 |
Apparatus for vapour deposition of parylene for use in the manufacture of drug eluting stents (1) |
0 % |
1.1.2008-31.12.2012 |
(4)ex841989 98 |
40 |
Solution preparation apparatus for the treatment of materials by a process involving a change of temperature for use in the manufacture of drug-eluting stents (1) |
0 % |
1.1.2008-31.12.2012 |
ex842199 00 |
91 |
Parts of equipment, for the purification of water by reverse osmosis, consisting of a bundle of hollow fibres of artificial plastic material with permeable walls, embedded in a block of artificial plastic material at one end and passing through a block of artificial plastic material at the other end, whether or not housed in a cylinder |
0 % |
1.1.2008-31.12.2008 |
ex842199 00 |
93 |
Components of separators for the separation or purification of gases from gas mixtures, consisting of a bundle of permeable hollow fibres enclosed within a container, whether or not perforated, of an overall length of 300 mm or more but not exceeding 3 700 mm and a diameter not exceeding 500 mm |
0 % |
1.1.2008-31.12.2008 |
ex842199 00 |
95 |
Parts of equipment for the filtration of magnetic dispersions, consisting essentially of nylon-6 fibres, enclosed in a plastic casing of a diameter of 70 mm (±2 mm) and a length of 520 mm (±5 mm) |
0 % |
1.1.2008-31.12.2008 |
ex842230 00 ex847989 97 |
10 30 |
Machines and apparatus, other than injection moulding machines, for the manufacture of ink-jet printer cartridges (1) |
0 % |
1.1.2008-31.12.2008 |
ex843999 10 ex843999 90 |
10 10 |
Suction-roll shells, not drilled, in the form of alloy-steel tubes, of a length of 5 207 mm or more and an external diameter of 754 mm or more, for use in machinery for making paper or paperboard (1) |
0 % |
1.1.2008-31.12.2008 |
ex845430 10 |
10 |
Casting machines for casting under pressure of metal alloys in thixotropic (semi-solid) form |
0 % |
1.1.2008-31.12.2008 |
ex845590 00 |
10 |
Helical turn device for cold-rolling mill |
0 % |
1.1.2008-31.12.2008 |
ex845610 00 |
10 |
Machine-tool operating by laser beam, for the cutting of slots on the surface of a cylindrical tube for use in the manufacture of endo-vascular prosthesis (so-called ‘stents’) (1) |
0 % |
1.1.2008-31.12.2008 |
(4)ex846221 80 |
10 |
Numerically controlled stent crimping machine comprising a base, a pneumatic crimp head and a motorised product positioning mechanism (V-block) to crimp a stent onto the balloon of a catheter using radial pressure in the manufacture of drug eluting stents (1) |
0 % |
1.1.2008-31.12.2012 |
ex847340 18 |
10 |
Thermal printer head |
0 % |
1.1.2008-31.12.2008 |
(4)ex847759 80 |
10 |
Machinery for working rubber or plastic for use in the manufacture of drug-eluting stents (1) |
0 % |
1.1.2008-31.12.2012 |
ex847780 99 |
10 |
Machines for casting or for surface modification of plastic membranes of heading No 3921 |
0 % |
1.1.2008-31.12.2008 |
ex847989 97 ex850110 99 |
20 78 |
Motor, whether or not mounted on a baseplate, for use in the manufacture of products falling within subheading 8517 12 00 or 8517 69 31 (1) |
0 % |
1.1.2008-31.12.2008 |
ex848180 59 |
10 |
Air control valve, consisting of a stepping motor and a valve pintle, for the regulation of idle air flow in fuel injection engines |
0 % |
1.1.2008-31.12.2008 |
ex848180 99 |
50 |
Service valve, consisting a combination of a two way valve on the liquid line and a three way valve on the gas line with: — a minimum enclosing pressure of 30 kgf/cm2, — a minimum withstanding pressure of 45 kgf/cm2, for use in the manufacture of outdoor air conditioning units (1) |
0 % |
1.1.2008-31.12.2011 |
ex848180 99 |
60 |
Four way valve, consisting of: — a core plunger, — a sealing plunger, — a 220 V-240 V AC 50/60 Hz solenoid coil, — a working pressure up to 4,3 Mpa, — a housing for directing the flow of the refrigerant, for use in the manufacture of outdoor air conditioning units (1) |
0 % |
1.1.2008-31.12.2011 |
ex848310 95 |
20 |
Integrally forged and roughly shaped generator and turbine shafts of a weight exceeding 215 tonnes |
0 % |
1.1.2008-31.12.2008 |
ex848340 51 |
20 |
Gear box, having a differential with wheel axle, for use in the manufacture of self-propelled lawnmowers with a seat of subheading 8433 11 51 (1) |
0 % |
1.1.2008-31.12.2008 |
ex848340 59 ex848340 90 |
20 20 |
Hydrostatic speed changer, having a hydro pump and a differential with wheel axle, for use in the manufacture of self-propelled lawnmowers with a seat of subheading 8433 11 51 (1) |
0 % |
1.1.2008-31.12.2008 |
ex850110 93 |
20 |
Single phased 50 Hz, AC motor driven by permanent single capacitor and having a power output of less than 37 W, for use in the manufacture of indoor split air conditioning units (1) |
0 % |
1.1.2008-31.12.2011 |
ex850110 99 |
54 |
DC motor, brushless, with an external diameter not exceeding 25,4 mm, a rated speed of 2 260 (±15 %) or 5 420 (±15 %) rpm, a supply voltage of 1,5 V or 3 V |
0 % |
1.1.2008-31.12.2008 |
ex850110 99 |
59 |
DC stepping motor, with an angle of step of 1,8° (0,09°), a holding torque of 0,156 Nm or more, a coupling flange the exterior dimensions of which do not exceed 43 × 43 mm, a chuck of a diameter of 4 mm (0,1 mm), a two-phase winding and an output not exceeding 5 W |
0 % |
1.1.2008-31.12.2008 |
ex850110 99 |
73 |
DC motor, whether or not mounted on a baseplate, for use in the manufacture of products falling within subheading 8471 70 50 (1) |
0 % |
1.1.2008-31.12.2008 |
ex850110 99 |
77 |
DC motor, with brushes, with a typical running torque of 0,004 Nm (0,001 Nm), with a coupling flange of a diameter of 32 mm (0,5 mm) and a chuck of a diameter of 2 mm (0,004 mm), with an internal rotor, a three-phase winding, a rated speed of 2 800 (±10 %) rpm and a supply voltage of 12 V (±15 %) |
0 % |
1.1.2008-31.12.2008 |
ex850110 99 |
79 |
DC motor with brushes and an internal rotor with a three-phase winding, of a specified temperature range covering at least — 20 °C to + 70 °C |
0 % |
1.1.2008-31.12.2008 |
ex850110 99 |
81 |
DC stepping motor, with an angle of step of 18° or more, a holding torque of 0,5 mNm or more, a coupling bracket the exterior dimensions of which do not exceed 22 x 68 mm, a two phase winding and an output not exceeding 5 W |
0 % |
1.1.2008-31.12.2008 |
ex850110 99 |
82 |
DC motor, brushless, with an external diameter not exceeding 29 mm, a rated speed of 1 500 (±15 %) or 6 800 (±15 %) rpm, a supply voltage of 2 V or 8 V |
0 % |
1.1.2008-31.12.2008 |
ex850110 99 |
83 |
Multiphase DC motor, brushless, of a continuous output of 31 W (±5 W) calculated with 600 rpm, equipped with electronic circuit with sensor using Hall effect (electric power steering motor) |
0 % |
1.1.2008-31.12.2008 |
ex850131 00 |
30 |
DC motor, brushless, with a three-phase winding, an external diameter of 85 mm or more, but not exceeding 115 mm, a nominal torque of 2,23 Nm (-1,0 Nm), of an output of more than 120 W but not exceeding 520 W, calculated with 1 550 RPM (±350 RPM) at a supply voltage of 12 V equipped with electronic circuit with sensors using the Hall effect, for use with an electric power steering control module (power steering motor) (1) |
0 % |
1.1.2008-31.12.2011 |
ex850240 00 |
20 |
Rotary converter, with a ferrite core, having coils with 2 or 6 windings and a diameter of 0,1 mm, connected to a flexible printed circuit |
0 % |
1.1.2008-31.12.2008 |
ex850300 91 ex850300 99 |
31 32 |
Rotor, at the innerside provided with one or two magnetic rings whether or not incorporated in a steel ring |
0 % |
1.1.2008-31.12.2008 |
ex850300 99 |
31 |
Stamped collector of an electric motor, having an external diameter not exceeding 16 mm |
0 % |
1.1.2008-31.12.2008 |
(4)ex850431 80 |
20 |
Transformer for use in the manufacture of inverters in LCD modules (1) |
0 % |
1.1.2008-31.12.2012 |
(4)ex850440 84 |
20 |
Inverter for driving lamps in a backlight unit, and supplying a particular voltage, for use in the manufacture of LCD modules (1) |
0 % |
1.1.2008-30.6.2008 |
ex850440 90 |
20 |
Direct current to direct current converter |
0 % |
1.1.2008-31.12.2008 |
ex850440 90 |
30 |
Static converter comprising a power switch with insulated-gate bipolar transistors (IGBTs), contained in a housing, for use in the manufacture of microwave ovens of subheading 8516 50 00 (1) |
0 % |
1.1.2008-31.12.2008 |
ex850450 95 |
20 |
Inductor with an inductance not exceeding 62 mH |
0 % |
1.1.2008-31.12.2008 |
ex850450 95 |
30 |
Multilayer monolithic inductors, contained in a housing of the SMD (surface mounted device) type the exterior dimensions of which do not exceed 1,8 × 3,4 mm, for use in the manufacture of products falling within subheading 8517 11 00, 8517 12 00 or 8517 69 31 (1) |
0 % |
1.1.2008-31.12.2008 |
ex850490 11 |
10 |
Ferrite cores, other than for deflection yokes |
0 % |
1.1.2008-31.12.2008 |
ex850490 18 |
32 |
Part of a rotary transformer, comprising a ferrite core provided with circular grooves with copper wire windings |
0 % |
1.1.2008-31.12.2008 |
ex850490 18 |
40 |
Trans coil for boosting DC voltage and isolating high and low voltages for use in the manufacture of products falling within subheading 8504 31 80 (1) |
0 % |
1.1.2008-31.12.2011 |
ex850511 00 |
31 |
Ferrite magnet having a remanence of 455 mT (±15 mT) |
0 % |
1.1.2008-31.12.2008 |
ex850511 00 |
33 |
Magnets consisting of an alloy of neodymium, iron and boron, either in the shape of a rounded rectangle with measurements not exceeding 15 × 10 × 2 mm, or in the shape of disc with a diameter not exceeding 90 mm, whether or not containing a hole in the centre |
0 % |
1.1.2008-31.12.2008 |
ex850519 90 |
31 |
Neodymium-ferro ring with an external diameter not exceeding 13 mm, an internal diameter not exceeding 9 mm |
0 % |
1.1.2008-31.12.2008 |
ex850519 90 |
32 |
Magnet, for use in the manufacture of deflection yokes (1) |
0 % |
1.1.2008-31.12.2008 |
ex850520 00 |
20 |
Electromagnetic wrap spring clutch with a diameter not exceeding 40 mm, for use in the manufacture of copiers and printers, including multi-functional copiers (1) |
0 % |
1.1.2008-31.12.2008 |
ex850520 00 |
30 |
Electromagnetic clutch, for use in the manufacture of compressors of air conditioning machines of motor vehicles (1) |
0 % |
1.1.2008-31.12.2008 |
ex850590 10 |
91 |
Solenoid with a plunger, operating at a nominal supply voltage of 24 V at a nominal DC of 0,08 A, for use in the manufacture of products falling within heading No 8517 (1) |
0 % |
1.1.2008-31.12.2008 |
ex850590 10 |
92 |
Electro-mechanical throttle plate actuator for automotive engines |
0 % |
1.1.2008-31.12.2008 |
ex850650 90 |
10 |
Lithium iodine single cell battery the dimensions of which do not exceed 9 × 23 × 45 mm and a voltage not exceeding 2,8 V |
0 % |
1.1.2008-31.12.2008 |
ex850650 90 |
20 |
Unit consisting of not more than 2 lithium batteries embedded in a socket for integrated circuits (battery-buffered socket), with not more than 32 connections and incorporating a control circuit |
0 % |
1.1.2008-31.12.2008 |
ex850650 90 |
30 |
Lithium-iodine or lithium-silver vanadium oxide single cell battery of dimensions not exceeding 28 × 45 × 15 mm and a capacity of not less than 1,05 Ah |
0 % |
1.1.2008-31.12.2008 |
ex850730 20 ex850780 20 ex850780 30 ex850780 80 |
20 20 20 20 |
Rectangular accumulator, with a length not exceeding 69 mm, a width not exceeding 36 mm and a thickness not exceeding 12 mm, for use in the manufacture of rechargeable batteries (1) |
0 % |
1.1.2008-31.12.2008 |
ex850730 20 |
30 |
Cylindrical nickel-cadmium accumulator, with a length of 65,3 mm (-1,5 mm) and a diameter of 14,5 mm (±1 mm), having a nominal capacity of 1 000 mAh or more, for use in the manufacture of rechargeable batteries (1) |
0 % |
1.1.2008-31.12.2008 |
ex850780 20 |
30 |
Cylindrical nickel-hydride accumulator, of a diameter not exceeding 14,5 mm, for the manufacture of rechargeable batteries (1) |
0 % |
1.1.2008-31.12.2008 |
ex850780 30 |
30 |
Cylindrical lithium-ion accumulator, with a length of 64,6 mm or more and a diameter of 18,1 mm or more, having a nominal capacity of 1 200 mAh or more, for use in the manufacture of rechargeable batteries (1) |
0 % |
1.1.2008-31.12.2008 |
ex850780 30 |
40 |
Rectangular lithium-ion-accumulator, with — a length of 80 mm or more, but not more than 1 000 mm, — a width of 25 mm or more, but not more than 150 mm, — a height of 100 mm or more, but not more than 500 mm, — a weight of 0,5 kg or more, but not more than 30 kg, — a capacity of 20 Ah or more, but not more than 1 000 Ah, for use in the manufacture of rechargeable power-supply units for incorporation into goods of heading No 8903 (1) |
0 % |
1.1.2008-31.12.2011 |
(4)ex850780 30 |
50 |
Lithium-ion-accumulator, with a distance between the poles of 55 mm or more, for use in the manufacture of rechargeable power-supply units for incorporation in electric motorcycles of subheading No 8711 90 (1) |
0 % |
1.1.2008-31.12.2012 |
ex851690 00 |
31 |
Dual diode, consisting of a power rectifying diode connected with a transformer protector diode through a wire, with a peak reverse power rate of 2 J or more, for use in the manufacture of products falling within subheading 8516 50 00 (1) |
0 % |
1.1.2008-31.12.2008 |
ex851690 00 |
33 |
Stainless steel soleplate with heating wire, for use in the manufacture of electric irons (1) |
0 % |
1.1.2008-31.12.2008 |
ex851829 95 |
20 |
Loudspeaker having a power of 5 W and an impedance of 4 ohms, with a diameter not exceeding 50 mm, for use in the manufacture of portable phones (1) |
0 % |
1.1.2008-31.12.2008 |
ex851830 95 |
20 |
Headphone and earphone for hearing aids, contained in a housing the exterior dimensions of which, excluding connecting points, do not exceed 5 × 6 × 8 mm |
0 % |
1.1.2008-31.12.2008 |
ex851840 81 |
20 |
Audio-frequency amplifier unit, comprising at least an audio-frequency amplifier, a static converter and a sound generator, for the manufacture of active loudspeaker boxes (1) |
0 % |
1.1.2008-31.12.2008 |
ex851890 00 |
91 |
Integrally cold-upsetted steel coreplate, in the form of a disk on one side provided with a cylinder, for use in the manufacture of loudspeakers (1) |
0 % |
1.1.2008-31.12.2008 |
(4)ex851981 35 |
10 |
Unmounted assembly, comprising at least one optical unit and DC motors and operational control circuit, with digital/analogue converter, for use in the manufacture of CD players (1) |
0 % |
1.1.2008-31.12.2012 |
ex852290 49 |
40 |
Optical unit consisting of a laser diode with one photodiode, emitting light of a nominal wavelength of 780 nm, contained in a housing with a diameter of not more than 10 mm and a height of not more than 9 mm, with not more than 10 connections |
0 % |
1.1.2008-31.12.2008 |
ex852290 49 |
50 |
Electronic assembly for a laser read-head of a compact disc player, comprising: — a printed circuit, — a photo-detector, in the form of a monolithic integrated circuit, contained in a housing, — not more than 3 connectors, — not more than 1 transistor, — not more than 3 variable and 4 fixed resistors, — not more than 5 capacitors, the whole mounted on a support |
0 % |
1.1.2008-31.12.2008 |
ex852290 49 |
60 |
Printed circuit board mounted with electronic circuits operating at a voltage of 12 V, for use in the manufacture of television sets combined with video units (1) |
0 % |
1.1.2008-31.12.2008 |
ex852290 49 |
70 |
Assembly, comprising at least a flexible printed circuit, a laser driver integrated circuit and a signal converter integrated circuit |
0 % |
1.1.2008-31.12.2008 |
ex852290 80 |
30 |
Thin-film recording and reproducing device, having at least 9 parallel channels for digital signals and at least 2 channels for analogue signals, to which a non-magnetic ceramic substrate is fixed, the whole rounded at one side, for use in the manufacture of magnetic heads for digital sound recording and digital/analogue sound reproducing apparatus of the cassette-type (1) |
0 % |
1.1.2008-31.12.2008 |
ex852290 80 |
35 |
Cassette-deck sub-assembly for sound recording and reproducing apparatus, for use in the manufacture of telephone answering machines (1) |
0 % |
1.1.2008-31.12.2008 |
ex852290 80 |
40 |
Sound reproducing assembly, comprising a tape deck mechanism of the cassette type, comprising a DC motor, for use in the manufacture of products falling within heading No 8519 (1) |
0 % |
1.1.2008-31.12.2008 |
ex852290 80 |
45 |
Roll for magnetic tape guiding and winding, for use in the manufacture of products falling within heading No 8521 or 8522 (1) |
0 % |
1.1.2008-31.12.2008 |
ex852290 80 |
50 |
Magnetic head for erasing video tapes, for use in the manufacture of products falling within heading No 8521 or 8522 (1) |
0 % |
1.1.2008-31.12.2008 |
ex852290 80 |
55 |
Assembly consisting of a driver circuit, a tacho-sensor and a brushless DC motor |
0 % |
1.1.2008-31.12.2008 |
ex852290 80 |
60 |
Analogue sound recording and reproducing assembly, comprising a record/playback head and a twin tape deck mechanism of the cassette type, not comprising circuits with amplification functions or power supply drive functions, for use in the manufacture of products falling within subheadings 8527 91 35 and 8527 91 99 (1) |
0 % |
1.1.2008-31.12.2008 |
ex852290 80 |
65 |
Assembly for optical discs, comprising at least an optical unit and DC motors, capable or not of double layer recording |
0 % |
1.1.2008-31.12.2008 |
ex852290 80 |
70 |
Video tape recording/reproducing assembly comprising at least a motor and a printed circuit board containing integrated circuits with driver or control functions, whether or not incorporating a transformer, for use in the manufacture of products falling within heading No 8521 (1) |
0 % |
1.1.2008-31.12.2008 |
ex852290 80 |
75 |
Optical reading head for CD player, consisting of one laser diode, one photodetector integrated circuit and one beam splitter |
0 % |
1.1.2008-31.12.2008 |
ex852290 80 ex854890 90 |
80 45 |
Laser optical drive unit assembly (so called mecha units) for the recording and/or reproduction of digital video and/or audio signals, comprising at least a laser optical reading and/or writing unit, one or more DC motors and not containing a printed circuit board or containing a printed circuit board not capable of signal processing for sounds and images, for use in the manufacture of products falling within headings No 8519, 8521, 8526, 8527, 8528 or 8543 (1) |
0 % |
1.1.2008-31.12.2008 |
ex852290 80 |
81 |
Laser optical pick up unit for the reproduction of optical signals from CD or DVD and the recording of optical signal on DVD, comprising at least — a laser diode, — a laser driver integrated circuit, — a photo detector integrated circuit, — a front monitor integrated circuit and an actuator, for use in the manufacture of products falling within heading No 8521 (1) |
0 % |
1.1.2008-31.12.2011 |
(4)ex852290 80 |
82 |
Blu-ray drive unit for the reproduction/recording of optical signals to/from DVD and the reproducing of optical signals from CD and Blu-ray discs, comprising at least: — an optical pick up unit with three kinds of laser, — spindle motor — stepping motor — drive control printed circuit board — motor driver integrated circuit — memory integrated circuit, for use in the manufacture of products falling within heading No 8521 (1) |
0 % |
1.1.2008-31.12.2008 |
ex852290 80 |
85 |
Video head drum, with video heads or with video and audio heads and an electric motor, for use in the manufacture of products falling within heading No 8521 (1) |
0 % |
1.1.2008-31.12.2008 |
ex852290 80 |
90 |
Magnetic head for playback of audio tapes, for use in the manufacture of products falling within heading 8519 (1) |
0 % |
1.1.2008-31.12.2008 |
ex852290 80 |
95 |
Drive-unit capable of magnetooptical signal recording and optical signal reproducing, comprising at least an optical unit, DC motors and a printed circuit on which are mounted integrated circuits providing drive and signal processing functions for reading optical discs having an external diameter not exceeding 70 mm, not comprising circuits with amplification functions or power supply drive functions |
0 % |
1.1.2008-31.12.2008 |
(4)ex852290 80 |
96 |
Hard disk drive, for incorporation in products of heading 8521 (1) |
0 % |
1.1.2008-31.12.2012 |
ex852580 19 |
20 |
Assembly for television cameras of dimensions not exceeding 10 × 15 × 18 mm, comprising an image sensor, an objective and a color processor, having an image resolution not exceeding 1 024 × 1 280 pixel, whether or not fitted with cable and/or housing, for the manufacture of goods of subheading 8517 12 00 (1) |
0 % |
1.1.2008-31.12.2008 |
ex852580 19 |
30 |
Compact chassis-type closed circuit television (CCTV) cameras, of a weight of not more than 250 g, contained in a housing of dimensions not exceeding 50 × 60 × 89,5 mm, with a single sensor Charge-Couple Device (CCD), with effective pixels not exceeding 440 000, for use in CCTV surveillance systems (1) |
0 % |
1.1.2008-31.12.2008 |
ex852580 19 |
40 |
Assembly for cameras used in computer notebooks of dimensions not exceeding 15 × 25 × 25 mm, comprising an image sensor, an objective and a color processor, having an image resolution not exceeding 1 600 × 1 200 pixel, wether or not fitted with cable and/or housing, wether or not mounted on a base and containing a LED chip (1) |
0 % |
1.1.2008-31.12.2011 |
ex852849 10 |
10 |
Video monitor comprising: — a flat screen monochrome cathode-ray tube with a diagonal measurement of the screen not exceeding 110 mm and equipped with a deflector yoke, and — a printed circuit on which are mounted a deflection unit, a video-amplifier and a transformer, the whole mounted or not on a chassis, for the manufacture of video entry-phones, video telephones or surveillance apparatus (1) |
0 % |
1.1.2008-31.12.2008 |
ex852859 90 |
20 |
Liquid cristal display colour video monitor having a DC input voltage of 7 V or more but not exceeding 30 V, with a diagonal measurement of the screen of 33,2 cm or less, suitable for the incorporation into goods of chapters 84 to 90 and 94 |
0 % |
1.1.2008-31.12.2008 |
ex852910 80 |
20 |
Ceramic filter package comprising 2 ceramic filters and 1 ceramic resonator for a frequency of 10,7 MHz (±30 kHz), contained in a housing |
0 % |
1.1.2008-31.12.2008 |
ex852910 80 |
25 |
Ceramic filter for a centre frequency of 10,7 MHz, with a bandwidth not exceeding 330 kHz at 3 dB and not exceeding 950 kHz at 20 dB, contained in a housing |
0 % |
1.1.2008-31.12.2008 |
ex852910 80 |
30 |
Ceramic filters for frequencies of 4,5 MHz or more but not exceeding 6,6 MHz contained in a housing |
0 % |
1.1.2008-31.12.2008 |
ex852910 80 |
35 |
Ceramic filter for a centre frequency of 450 kHz or more but not exceeding 470 kHz, with a bandwidth not exceeding 13 kHz at 3 dB, contained in a housing |
0 % |
1.1.2008-31.12.2008 |
ex852910 80 |
40 |
Ceramic filter for a frequency of 450 kHz, with a bandwidth not exceeding 18 kHz at 10 dB, contained in a housing |
0 % |
1.1.2008-31.12.2008 |
ex852910 80 |
45 |
Ceramic filter for a centre frequency of 455 kHz (-1,5 kHz), with a bandwidth not exceeding 25 kHz at 6 dB and not exceeding 60 kHz at 40 dB, contained in a housing |
0 % |
1.1.2008-31.12.2008 |
ex852910 80 |
50 |
Ceramic filter for a centre frequency of 450 kHz (-1,5 kHz) or 455 kHz (-1,5 kHz), with a bandwidth not exceeding 30 kHz at 6 dB and not exceeding 70 kHz at 40 dB, contained in a housing |
0 % |
1.1.2008-31.12.2008 |
ex852910 80 |
55 |
Radio frequency (RF) signal isolator for frequencies of 890 MHz or more but not exceeding 1 990 MHz, having an insertion loss not exceeding 0,7 dB, contained in a housing |
0 % |
1.1.2008-31.12.2008 |
ex852910 80 |
60 |
Filters, excluding surface acoustic wave filters, for a center frequency of 485 MHz or more but not exceeding 1 990 MHz with an insertion loss not exceeding 3,5 dB, contained in a housing |
0 % |
1.1.2008-31.12.2008 |
ex852910 80 |
65 |
Ceramic filter package, excluding surface acoustic wave filters, consisting of: — a transmit filter with a centre frequency of 1 747,5 MHz and an insertion loss not exceeding 2,3 dB at a bandwidth of 75 MHz — and — a receive filter with a centre frequency of 1 842,5 MHz and an insertion loss not exceeding 3,3 dB at a bandwidth of 75 MHz, the whole contained in a housing |
0 % |
1.1.2008-31.12.2008 |
ex852910 80 |
70 |
Ceramic filter package, excluding surface acoustic wave filters, comprising 2 filters with one of the following combinations of characteristics: — a transmit centre frequency of 902,5 MHz, a receive centre frequency of 947,5 MHz and an insertion loss not exceeding 3,2 dB at a bandwidth of 25 MHz — or — a transmit centre frequency of 1 747,5 MHz, a receive centre frequency of 1 842,5 MHz and an insertion loss not exceeding 3,5 dB at a bandwidth of 75 MHz, the whole contained in a housing |
0 % |
1.1.2008-31.12.2008 |
ex852910 95 |
20 |
Antenna switch, comprising: — a transmit filter with a centre frequency of 942,5 MHz or more but not exceeding 1 990 MHz and — a receive filter with a centre frequency of 847,5 MHz or more but not exceeding 1 990 MHz, the whole contained in a housing |
0 % |
1.1.2008-31.12.2008 |
ex852990 65 ex854890 90 |
30 44 |
Parts of TV-apparatus, having micro-processor and video-processor functions, comprising at least a micro-controller and a video-processor, mounted on a leadframe and contained in a plastic housing |
0 % |
1.1.2008-31.12.2008 |
ex852990 65 |
40 |
Analogue sound recording and reproducing assembly, comprising a record/playback head, a single tape deck mechanism of the cassette type, a spindle electric motor, a rotation direction change mechanism and a chassis |
0 % |
1.1.2008-31.12.2008 |
ex852990 65 |
50 |
Tuner transforming high-frequency signals into mid-frequency signals, for use in the manufacture of products falling under No 8521 and No 8528 (1) |
0 % |
1.1.2008-31.12.2011 |
ex852990 65 |
60 |
Tuner transforming high frequency signals to mid frequency signals for use in the manufacture of sattelite or terrestrial TV receivers for set-top boxes (1) |
0 % |
1.1.2008-31.12.2011 |
ex852990 65 |
70 |
Unit driver consisting of an electronic integrated circuit and a flexible printed circuit, for use in the manufacture of LCD modules (1) |
0 % |
1.1.2008-31.12.2011 |
(4)ex852990 65 |
75 |
Modules for driving addressing pixels, comprising at least semiconductor chips, for use in the manufacture of plasma display modules (1) |
0 % |
1.1.2008-31.12.2012 |
(4)ex852990 65 |
80 |
Scan driver boards for generating electric pulses for scanning to certain electrodes in a glass panel, comprising at least semiconductor chips, for use in the manufacture of plasma display modules (1) |
0 % |
1.1.2008-31.12.2012 |
(4)ex852990 65 |
85 |
Timing converter boards for generating electric pulses for driving addressing pixels, for use in the manufacture of LCD modules (1) |
0 % |
1.1.2008-30.6.2008 |
ex852990 92 |
32 |
Optical unit for video projection, comprising a colour separation system, a positioning mechanism and lenses, for use in the manufacture of products falling within heading No 8528 (1) |
0 % |
1.1.2008-31.12.2008 |
ex852990 92 |
34 |
Assembly consisting of a lens unit, having an adjustable focal length of 4 mm or more but not exceeding 69 mm and comprising a zoom encoder, a stepping motor unit, a zoom motor unit, an iris motor unit and a photo interrupter |
0 % |
1.1.2008-31.12.2008 |
ex852990 92 |
35 |
Video recording and reproducing assembly, comprising a tape deck mechanism of the cassette type, comprising a DC motor, for use in the manufacture of products falling within heading No 8525 (1) |
0 % |
1.1.2008-31.12.2008 |
ex852990 92 |
36 |
Assembly consisting of a monochrome cathode-ray tube with a diagonal measurement of the screen of 143 mm or more but not exceeding 230 mm and a concave focus lens mounted on a liquid-filled cooling armature |
0 % |
1.1.2008-31.12.2008 |
ex852990 92 ex852990 97 |
37 40 |
Filter, consisting of 2 piezo-electric crystals each with a frequency of 21 MHz or more but not exceeding 30 MHz and seperately mounted on a bracket, with not more than 7 connections |
0 % |
1.1.2008-31.12.2008 |
ex852990 92 |
40 |
Assembly comprising prisms, digital micromirror device (DMD) chips and electronic control circuits, for the manufacture of television projection equipments or video projectors (1) |
0 % |
1.1.2008-31.12.2008 |
ex852990 92 |
41 |
Digital micromirror device (DMD)-chips, for use in the manufacture of video projectors (1) |
0 % |
1.1.2008-31.12.2008 |
ex852990 92 |
42 |
Heat sinks and cooling fins of aluminium, for maintaining the operating temperature of transistors and integrated circuits in television sets (1) |
0 % |
1.1.2008-31.12.2008 |
ex852990 92 |
43 |
Plasma display module incorporating only address and display electrodes, with or without driver and/or control electronics for pixel address only and with or without a power supply |
0 % |
1.1.2008-31.12.2008 |
ex852990 92 |
44 |
LCD modules, solely consisting of one or more TFT glass or plastic cells, not combined with touch screen facilities, with or without backlight unit, with or without inverters and one or more printed circuit boards with control electronics for pixel addressing only |
0 % |
1.1.2008-31.12.2008 |
ex852990 92 |
45 |
Integrated circuit package with TV reception functionality containing a channel decoder die, tuner die, power management die, GSM filters and discrete as well as embedded passive circuit elements for reception of digitally broadcasting videosignals of DVB-T and DVB-H formats |
0 % |
1.1.2008-31.12.2008 |
(4)ex852990 97 |
50 |
Video tape recording/reproducing assembly comprising at least a motor and a printed circuit board containing integrated circuits with driver or control functions, mounted on a printed circuit board containing at least integrated circuits for controlling the tape deck mechanism functions, video recording functions and TV-signal processing functions, for use in the manufacture of products falling within heading No 8528 (1) |
0 % |
1.1.2008-31.12.2008 |
ex853180 95 |
20 |
Indicator lamp, consisting of 4 light-emitting diodes made from silicon-cardide (SiC) semiconductor material, operating at a nominal wavelength of 481, 560 or 630 nm, contained in a housing |
0 % |
1.1.2008-31.12.2008 |
ex853180 95 |
30 |
Indicator lamp, consisting of 2 light-emitting diodes made from aluminium-gallium-arsenic (AlGaAs) or gallium-phosphor (GaP) semiconductor material, having a rectangular base, contained in a housing of the SMD (surface mounted device) type and having a lens |
0 % |
1.1.2008-31.12.2008 |
ex853180 95 |
40 |
Electro-accoustic transducer |
0 % |
1.1.2008-31.12.2008 |
ex853180 95 |
50 |
An electromagnetic display, consisting of 7 electromagnetic coils which by means of the residual magnetism in the stators provide that the last indication remains available (set state), and 7 pivoting light-reflecting segments each of which is attached to a bar magnet; assembly comprising such displays |
0 % |
1.1.2008-31.12.2008 |
ex853630 30 ex853630 90 ex853650 80 |
11 31 96 |
Thermo-electric switch with a cut-off current of 50 A or more, comprising a snap action switch, for direct mounting on an electric motor coil, contained in a hermetically sealed housing |
0 % |
1.1.2008-31.12.2008 |
ex853641 10 ex853641 90 ex853649 00 |
91 91 91 |
Thermal relays contained in a hermetically sealed glass cartridge not exceeding 35 mm in length excluding wires, with a maximum leakage rate of 10–6 cm3 He/sec at one bar in the temperature range 0 to 160 °C, to be incorporated into compressors for refrigerating equipment (1) |
0 % |
1.1.2008-31.12.2008 |
ex853650 11 |
31 |
Switch of the printed circuit mount type, operating at a force of 4,9 N (0,9 N), contained in a housing |
0 % |
1.1.2008-31.12.2008 |
ex853650 11 |
32 |
Mechanical tact switch for connecting electronic circuits, operating at a voltage not exceeding 60 V and at a current strength not exceeding 50 mA, for use in the manufacture of television sets (1) |
0 % |
1.1.2008-31.12.2008 |
ex853650 15 |
32 |
Rotary switch in form of a wheel with a diameter of between 15 and 16 mm and contacts for closing the circuit, for a rated voltage of 12 V at 50 mA |
0 % |
1.1.2008-31.12.2008 |
ex853650 19 |
91 |
Hall effect switch, comprising 1 magnet, 1 Hall effect sensor and 2 capacitors, contained in a housing with 3 connections |
0 % |
1.1.2008-31.12.2008 |
ex853650 19 |
92 |
Hydraulic pressure switch, incorporating a pressure sensitive snap action disc, operating at a supply voltage of 6 V or more but not exceeding 18 V |
0 % |
1.1.2008-31.12.2008 |
ex853650 19 ex853650 80 |
93 97 |
Devices, having adjustable controller and switching functions, comprising one ore more monolithic integrated circuits whether or not combined with semiconductor elements, mounted together on a leadframe and contained in a plastic housing |
0 % |
1.1.2008-31.12.2008 |
ex853650 80 |
93 |
Switch unit for coaxial cable, comprising 3 electromagnetic switches, with a switching time not exceeding 50 ms and an actuating current not exceeding 500 mA at a voltage of 12 V |
0 % |
1.1.2008-31.12.2008 |
ex853650 80 |
95 |
Reed switch having a switching power of 20 W or more within the range of 17-43 A.turn, in the form of a glass capsule, not containing mercury, the dimensions of which do not exceed 3 × 21 mm, for use in the manufacture of automotive airbag shock-sensors (1) |
0 % |
1.1.2008-31.12.2008 |
ex853650 80 |
98 |
Mechanical push-button switch for connecting electronic circuits, operating at a voltage of 220 V or more but not exceeding 250 V and at a current strength not exceeding 5 A, for use in the manufacture of television sets (1) |
0 % |
1.1.2008-31.12.2008 |
ex853690 85 |
92 |
Metallic stamped frame with connections |
0 % |
1.1.2008-31.12.2008 |
ex853690 85 |
93 |
Contact element with a hold-force of more than 3 N, in the form of 2 rectangular plastic frames interconnected by electric conductors |
0 % |
1.1.2008-31.12.2008 |
ex853690 85 ex854449 93 |
94 10 |
Elastomeric connector, of rubber or silicone, consisting of one or more conductor elements |
0 % |
1.1.2008-31.12.2008 |
ex853710 99 |
92 |
Touch sensitive screen panel, consisting of a conductive grid between two glass or plastic plates or sheets, fitted with electric conductors and connectors |
0 % |
1.1.2008-31.12.2008 |
ex853710 99 |
93 |
Electronic control units for a voltage of 12 V, for use in the manufacture of vehicle mounted temperature control systems (1) |
0 % |
1.1.2008-31.12.2008 |
ex853710 99 ex854370 90 |
94 20 |
Unit consisting of two junction field effect transistors contained in a dual lead frame housing |
0 % |
1.1.2008-31.12.2008 |
ex853710 99 ex854370 90 |
95 25 |
Unit consisting of two metal oxide semiconductor field effect transistors contained in a dual lead frame housing |
0 % |
1.1.2008-31.12.2008 |
ex853890 99 |
92 |
Part of an electrothermal fuse, consisting of a tin coated copper wire attached to a cylindrical casing, the exterior dimensions of which do not exceed 5 × 48 mm |
0 % |
1.1.2008-31.12.2008 |
ex853939 00 |
20 |
Cold cathode (CCFL) or External Electrode (EEFL) fluorescent lamps, of a diameter not exceeding 5 mm and with a length of more than 120 mm but not exceeding 1 570 mm, for incorporation in backlight units of LCD modules (1) |
0 % |
1.1.2008-31.12.2011 |
ex854011 11 |
91 |
Colour cathode-ray tube with a slit or slot mask, equipped with electron guns placed side by side (in-line technology) and with a diagonal measurement of the screen of 12 cm or more but not exceeding 26 cm |
0 % |
1.1.2008-31.12.2008 |
ex854011 11 |
93 |
Colour cathode-ray tube, equipped with one gun with three rays and with a diagonal measurement of the screen of 19 cm or more but not exceeding 26 cm |
0 % |
1.1.2008-31.12.2008 |
ex854011 11 |
95 |
Colour cathode-ray tube with a slot mask, equipped with an electron gun and a deflection yoke and with a screen width/height ratio of 4/3 and a diagonal measurement of the screen of not more than 42 cm |
0 % |
1.1.2008-31.12.2011 |
ex854011 13 |
91 |
Colour cathode-ray tube with a slit or slot mask, having a distance between stripes of the same colour of less than 0,42 mm and a diagonal measurement of the screen of 49 cm, for use in the manufacture of professional video monitors including security and medical monitor applications (1) |
0 % |
1.1.2008-31.12.2008 |
ex854011 15 |
20 |
Full square curved screen colour cathode-ray tube, equipped with an electron gun and a deflection yoke and with a screen width/height ratio of 4/3 and a diagonal measurement of the screen of 68 cm (±2 mm) |
0 % |
1.1.2008-31.12.2011 |
ex854011 19 |
91 |
Colour cathode-ray tube equipped with electron guns placed side by side (in-line technology), with a diagonal measurement of the screen of 79 cm or more |
0 % |
1.1.2008-31.12.2011 |
ex854011 91 |
31 |
Colour cathode-ray tube with a screen width/height ratio of 16/9 and a diagonal measurement of the screen of 39,8 cm (0,3 cm) |
0 % |
1.1.2008-31.12.2008 |
ex854012 00 |
82 |
Monochrome cathode-ray tube with a diagonal measurement of the screen of 250 mm or more but not exceeding 320 mm and an anode voltage of 18 kV or more but not exceeding 22 kV |
0 % |
1.1.2008-31.12.2008 |
ex854012 00 |
83 |
Monochrome cathode-ray tube, with a diagonal measurement of the screen of 150 mm or more but not exceeding 182 mm, a neck diameter of less than 30 mm and an anode voltage of 25 kV or more but not exceeding 32 kV |
0 % |
1.1.2008-31.12.2008 |
ex854012 00 |
84 |
Flat screen monochrome cathode-ray tube, with a diagonal measurement of the screen not exceeding 102 mm |
0 % |
1.1.2008-31.12.2008 |
ex854020 80 |
91 |
Photomultiplier consisting of a photocathode tube with 9 or 10 dyodes, for light of a wavelength of 160 nm or more but not exceeding 930 nm, of a diameter not exceeding 14 mm and a height not exceeding 94 mm |
0 % |
1.1.2008-31.12.2011 |
ex854040 00 ex854060 00 |
31 31 |
Colour cathode-ray tube with a dot mask, equipped with 3 electron guns placed side by side (in-line technology) or 1 gun with 3 rays, with a diagonal measurement of the screen of more than 72 cm and a distance of less than 0,5 mm between dots of the same colour |
0 % |
1.1.2008-31.12.2008 |
ex854040 00 ex854060 00 |
32 32 |
Colour cathode-ray tube with a dot mask, equipped with 3 electron guns placed side by side (in-line technology) or 1 gun with 3 rays, having a diagonal measurement of the screen not exceeding 72 cm |
0 % |
1.1.2008-31.12.2008 |
ex854040 00 |
33 |
Colour cathode-ray tube with a slit or slot mask, having a distance between stripes of the same colour of less than 0,35 mm and a diagonal measurement of the screen not exceeding 53 cm |
0 % |
1.1.2008-31.12.2008 |
ex854040 00 |
34 |
Colour cathode-ray tube with a slit or slot mask, having a distance between stripes of the same colour of less than 0,39 mm and a diagonal measurement of the screen of 33 cm or more but not exceeding 38 cm |
0 % |
1.1.2008-31.12.2008 |
ex854040 00 |
35 |
Colour cathode-ray tube with a slit or slot mask, having a distance between stripes of the same colour of less than 0,35 mm and a diagonal measurement of the screen not exceeding 72 cm, for use in the manufacture of monitors (1) |
0 % |
1.1.2008-31.12.2008 |
ex854040 00 |
36 |
Colour cathode-ray tube with a slit or slot mask, having a distance between stripes of the same colour of less than 0,30 mm and a diagonal measurement of the screen not exceeding 58 cm |
0 % |
1.1.2008-31.12.2008 |
ex854050 00 ex854060 00 |
31 33 |
Flat screen monochrome cathode-ray tube, with a diagonal measurement of the screen of 142 mm or more but not exceeding 190 mm, a luminescence of 300 lumen or more but not exceeding 2 000 lumen, a resolution of 0,06 mm or more but not exceeding 0,1 mm, phosphor types P1 or P22 or P53 or P55 or P56, an anode voltage of more than 34 kV, a focus voltage of more than 7 kV and a cathode current of 3 mA or more |
0 % |
1.1.2008-31.12.2008 |
ex854050 00 ex854060 00 |
32 34 |
Monochrome cathode-ray tube with a diagonal measurement of the screen of 176 mm or more but not exceeding 520 mm and a neck diameter not exceeding 21 mm |
0 % |
1.1.2008-31.12.2008 |
ex854071 00 |
20 |
Continuous wave magnetron with a fixed frequency of 2 460 MHz, packaged magnet, probe output, for use in themanufacture of products falling within subheading 8516 50 00 (1) |
0 % |
1.1.2008-31.12.2008 |
ex854089 00 |
91 |
Displays in the form of a tube consisting of a glass housing mounted on a board the dimensions of which do not exceed 300 mm × 350 mm excluding leads. The tube contains one or more rows of characters or lines arranged in rows, each character or line consisting of fluorescent or phosphorescent elements. These elements are mounted on a metallised base which is covered with fluorescent substances or phosphorescent salts which give off light when bombarded with electrons |
0 % |
1.1.2008-31.12.2008 |
ex854089 00 |
92 |
Vacuum fluorescent display tube |
0 % |
1.1.2008-31.12.2008 |
ex854091 00 |
31 |
Electron gun, for use in the manufacture of colour cathode-ray tubes of subheading 8540 40 00 with a diagonal measurement of the screen of 34 cm or more but not exceeding 39 cm (1) |
0 % |
1.1.2008-31.12.2008 |
ex854091 00 |
32 |
Electron gun of colour cathode-ray tubes with an anode voltage of 27,5 kV or more but not exceeding 36 kV |
0 % |
1.1.2008-31.12.2008 |
ex854091 00 |
36 |
Flat masks, with: — a width of 592,8 mm (±0,5 mm) — a height of 463,1 mm (±0,5 mm) — a thickness of 250 μm (±10 μm) — a width of the apertures in the centre of 180 μm (±8 μm) — a width of the apertures at the edge of 210 μm (±8 μm) |
0 % |
1.1.2008-31.12.2008 |
ex854091 00 |
92 |
Slit or slot mask, excluding masks with continuously vertical slits, with a diagonal measurement of 69 cm or less |
0 % |
1.1.2008-31.12.2011 |
ex854091 00 |
93 |
Electron gun for the production of monochrome cathode-ray tubes with a diagonal measurement of the screen of 7,6 cm or more but not exceeding 30,5 cm (1) |
0 % |
1.1.2008-31.12.2008 |
(4)ex854091 00 |
95 |
Slit or slot mask (‘shadow mask’), excluding masks with continuously vertical slits, with a diagonal measurement of 697,5 mm or more, but not more than 782,9 mm |
0 % |
1.1.2008-31.12.2012 |
ex854091 00 |
96 |
Assembly for cathode-ray tubes with 2 or more but not more than 6 coils, a plastic support and a metal fixing ring, for the adjustment of display sharpness and/or convergence |
0 % |
1.1.2008-31.12.2008 |
ex854091 00 |
97 |
Slit mask, consisting of continuously vertical slits measuring more than 275 mm in the length |
0 % |
1.1.2008-31.12.2008 |
ex854091 00 |
98 |
Frame of molybdenum chrome steel, for use in the manufacture of cathode-ray tubes (1) |
0 % |
1.1.2008-31.12.2008 |
ex854099 00 |
91 |
Anode, cathode or output part, or an assembly comprising these components (magnetron core tube), for the manufacture of magnetrons of subheading 8540 71 00 (1) |
0 % |
1.1.2008-31.12.2008 |
ex854310 00 |
10 |
Electron beam accelerator systems, with an operating voltage not exceeding 1,5 MV and a beam current not exceeding 70 mA |
0 % |
1.1.2008-31.12.2008 |
ex854370 90 |
30 |
Amplifier, consisting of active and passive elements mounted on a printed circuit, contained in a housing |
0 % |
1.1.2008-31.12.2008 |
ex854370 90 |
35 |
Radio frequency (RF) modulator, operating with a frequency range of 43 MHz or more but not exceeding 870 MHz, capable of switching VHF and UHF signals, consisting of active and passive elements mounted on a printed circuit, contained in a housing |
0 % |
1.1.2008-31.12.2008 |
ex854370 90 |
40 |
Rectifier assembly of power barrier diodes, consisting of 2 diodes with an average forward current not exceeding 600 A and a repetitive reverse peak voltage not exceeding 40 V, each contained in a housing and connected by a common cathode |
0 % |
1.1.2008-31.12.2008 |
ex854370 90 |
45 |
Piezo-electric crystal oscillator with a fixed frequency, within a frequency range of 1,8 MHz to 67 MHz, contained in a housing |
0 % |
1.1.2008-31.12.2008 |
ex854370 90 |
50 |
Mechanical vibratory gyroscope driven by a 25 or 26 kHz oscillator, comprising a differential amplifier and a detector circuit, contained in a housing |
0 % |
1.1.2008-31.12.2008 |
ex854370 90 |
55 |
Opto-electronic circuit comprising one or more light-emitting diodes (LEDs), whether or not equipped with an integrated driving circuit, and one photodiode with amplifier circuit, whether or not with an integrated logic gate arrays circuit or one or more light-emitting diodes and at least 2 photodiodes with an amplifier circuit, whether or not with an integrated logic gate arrays circuit or other integrated circuits, contained in a housing |
0 % |
1.1.2008-31.12.2008 |
ex854370 90 |
60 |
Oscillator, with a centre frequency of 20 GHz or more but not exceeding 42 GHz, consisting of active and passive elements not mounted on a substrate, contained in a housing |
0 % |
1.1.2008-31.12.2008 |
ex854370 90 |
65 |
Audio recording and reproducing circuit, capable of stereo audio data storage and simultaneous record and playback, comprising 2 or 3 monolithic integrated circuits mounted on a printed circuit or a lead frame, contained in a housing |
0 % |
1.1.2008-31.12.2008 |
ex854370 90 |
70 |
Overvoltage suppression assembly, comprising 8 diodes, having a reverse stand-off voltage not exceeding 4,5 V, a reverse leakage current not exceeding 10 μΑ, a peak pulse current not exceeding 30 A and a nominal capacitance of 50 pF, contained in a housing |
0 % |
1.1.2008-31.12.2008 |
ex854370 90 |
75 |
Charged coupled device (CCD) scanner assembly, for a real-time film scanning system, having optical functions, illumination functions and signal processing functions |
0 % |
1.1.2008-31.12.2008 |
ex854370 90 |
80 |
Temperature compensated oscillator, comprising a printed circuit on which are mounted at least a piezo-electric crystal and an adjustable capacitor, contained in a housing |
0 % |
1.1.2008-31.12.2008 |
ex854370 90 |
85 |
Voltage controlled oscillator (VCO), other than temperature compensated oscillators, consisting of active and passive elements mounted on a printed circuit, contained in a housing |
0 % |
1.1.2008-31.12.2008 |
ex854370 90 |
90 |
Fuel cell module consisting of: — polymer electrolyte membrane fuel cells in a housing with an integrated cooling system, — a voltage monitoring unit and connections, for use in the manufacture of car propulsion systems (1) |
0 % |
1.1.2008-31.12.2008 |
ex854390 00 |
20 |
Stainless steel cathode in the form of a plate with a hanger bar, whether or not with plastic side strips |
0 % |
1.1.2008-31.12.2008 |
ex854390 00 |
30 |
Assembly of products falling within heading No 8541 or 8542 mounted on a printed circuit, contained in a housing |
0 % |
1.1.2008-31.12.2008 |
(4)ex854390 00 |
40 |
Part of an electrolysis device, consisting of a pan of nickel equipped with a wire mesh of nickel, fixed via ribs of nickel, and a pan of titanium equipped with a wire mesh of titanium, fixed via ribs of titanium, of which both pans are fixed together back to back |
0 % |
1.1.2008-31.12.2012 |
ex854460 10 |
10 |
Anode cap cable, for use in the manufacture of fly back transformers (1) |
0 % |
1.1.2008-31.12.2008 |
ex854519 90 |
20 |
Carbon electrodes, for use in the manufacture of zinc-carbon batteries (1) |
0 % |
1.1.2008-31.12.2008 |
ex854590 90 |
01 |
Cell and battery carbon, in the form of rods, with a length of 34 mm or more but not exceeding 160 mm and a diameter not exceeding 12 mm |
0 % |
1.1.2008-31.12.2008 |
ex854710 10 |
10 |
Insulated fitting of ceramics, containing by weight 90 % or more of aluminium oxide, metallized, in the form of a hollow cylindrical body of an external diameter of 20 mm or more but not exceeding 250 mm, for the manufacture of vacuum interrupters (1) |
0 % |
1.1.2008-31.12.2008 |
ex854890 90 |
38 |
Parts, for use in the manufacture or the repair of products falling within subheading 8443 31 10 (1) |
0 % |
1.1.2008-31.12.2008 |
ex854890 90 |
40 |
Infrared signal receiver unit, consisting of a photodiode and at least an amplifier in the form of a monolithic integrated circuit, contained in a housing |
0 % |
1.1.2008-31.12.2008 |
ex854890 90 |
41 |
Unit, consisting of a resonator operating within a frequency range of 1,8 MHz or more but not exceeding 40 MHz and a capacitor, contained in a housing |
0 % |
1.1.2008-31.12.2008 |
ex854890 90 ex911090 00 |
42 94 |
Clock/calendar circuit, consisting of a printed circuit on which are mounted at least a quartz oscillator and a monolithic integrated circuit, the whole contained in a housing |
0 % |
1.1.2008-31.12.2008 |
ex854890 90 |
43 |
Contact image sensor |
0 % |
1.1.2008-31.12.2008 |
(4)ex854890 90 |
47 |
Unit consisting of two or more light emitting diode chips operating at a typical wavelength of 440 nm or more but not exceeding 660 nm, contained in a lead frame housing whose exterior dimensions — without fittings — do not exceed 12 × 12 mm |
0 % |
1.1.2008-31.12.2008 |
ex854890 90 |
48 |
Optical unit, consisting at least of a laserdiode and a photodiode operating at a typical wavelength of 635 nm or more but not exceeding 815 nm |
0 % |
1.1.2008-31.12.2008 |
ex854890 90 |
49 |
LCD modules, solely consisting of one or more TFT glass or plastic cells, combined with touch screen facilities, with or without backlight unit, with or without inverters and one or more printed circuit boards with control electronics for pixel addressing only |
0 % |
1.1.2008-31.12.2008 |
(4)ex870423 91 |
20 |
Motor chassis with a self-ignition capacity of at least 8 500 cm3, fitted with a cabin on either 3, 4 or 5 wheels having a wheelbase of at least 480 cm, not containing working machinery, to be built into special purpose motor vehicles with a width of at least 300 cm to distribute fertlizers (1) |
0 % |
1.1.2008-31.12.2012 |
ex870899 97 |
20 |
Metal housing caps for incorporation into balancing-arms or spherical bearings used in the suspension systems for the front wheels of motor vehicles (1) |
0 % |
1.1.2008-31.12.2011 |
ex871110 00 |
10 |
Portable motorised scooter, presented unassembled or disassembled |
0 % |
1.1.2008-31.12.2008 |
ex900110 90 |
10 |
Image reverser made up from an assembly of optical fibres |
0 % |
1.1.2008-31.12.2008 |
ex900120 00 |
10 |
Material consisting of a polarising film, supported on one or both sides by transparent material |
0 % |
1.1.2008-31.12.2008 |
ex900120 00 ex900190 00 |
20 55 |
Optical, diffuser, reflector or prism sheets, unprinted diffuser plates, whether or not possessing polarising properties, specifically cut, for use in the manufacture of LCD modules (1) |
0 % |
1.1.2008-31.12.2011 |
ex900190 00 |
20 |
Rear projection screen, comprising a Fresnel lens of plastic and a polarising sheet of plastic, for use in the manufacture of products falling within heading No 8528 (1) |
0 % |
1.1.2008-31.12.2008 |
ex900190 00 |
25 |
Lens of plastic, unmounted, having a focal length of 3,86 mm (0,1 mm) and with a diameter not exceeding 8 mm, for use in the manufacture of compact disc players (1) |
0 % |
1.1.2008-31.12.2008 |
ex900190 00 |
30 |
Optical fibre plate, for use in the manufacture of screens and photocathodes for image intensifiers (1) |
0 % |
1.1.2008-31.12.2008 |
ex900190 00 |
35 |
Rear projection screen, comprising a lenticular plastic plate |
0 % |
1.1.2008-31.12.2008 |
ex900190 00 |
40 |
Prism for the splitting of light, unmounted, for use in the manufacture of charged-coupled image (CCD) cameras (1) |
0 % |
1.1.2008-31.12.2008 |
ex900190 00 |
45 |
Rod of neodymium-doped yttrium-aluminium garnet (YAG) material, polished at both ends |
0 % |
1.1.2008-31.12.2008 |
ex900190 00 |
50 |
Lens of plastic, unmounted, for use in the manufacture of products falling within subheading 9006 40 00 (1) |
0 % |
1.1.2008-31.12.2008 |
ex900190 00 |
70 |
Polyethylene terephthalate film with a thickness of less than 300 μm according to ASTM D 2103, having on one side prisms of acrylic resin with a prism angle of 90° and a prism pitch of 50 μm |
0 % |
1.1.2008-31.12.2011 |
(4)ex900190 00 |
75 |
Front filter comprising glass panels with special printing and film coating, for use in the manufacture of plasma display modules (1) |
0 % |
1.1.2008-31.12.2012 |
ex900211 00 |
10 |
Adjustable lens unit, having a focal length of 90 mm or more but not exceeding 180 mm and comprising a combination of between 4 and 8 glass or methacrylic lenses with a diameter of 120 mm or more but not exceeding 180 mm, each lens coated on at least one side with a magnesium fluoride layer, for use in the manufacture of video projectors (1) |
0 % |
1.1.2008-31.12.2008 |
ex900211 00 |
50 |
Lens unit, having a focal length of 25 mm or more but not exceeding 150 mm, consisting of glass or plastic lenses, with a diameter of 60 mm or more but not exceeding 190 mm |
0 % |
1.1.2008-31.12.2008 |
ex900211 00 |
60 |
Optical element, comprising one or more mounted lenses of plastic, for use in the manufacture of products falling within subheading 9006 40 00 (1) |
0 % |
1.1.2008-31.12.2008 |
ex900219 00 |
10 |
Lens unit, having a focal length of 24,96 mm (0,1 mm), a diameter of 16 mm and a length of 16 mm, for use in the manufacture of products falling within subheading 8443 31 10 (1) |
0 % |
1.1.2008-31.12.2008 |
ex900220 00 |
10 |
Filter, consisting of a plastic polarising membrane, a glass plate and a transparent protective film, mounted on a metal frame, for use in the manufacture of products falling within heading 8528 (1) |
0 % |
1.1.2008-31.12.2008 |
ex900290 00 |
20 |
Lens, mounted, having a fixed focal length of 3,8 mm (0,19 mm) or 8 mm (0,4 mm), with a relative aperture of F2,0 and a diameter not exceeding 33 mm, for use in the manufacture of charged-coupled (CCD) cameras (1) |
0 % |
1.1.2008-31.12.2008 |
ex900290 00 |
30 |
Optical unit, comprising 1 or 2 rows of optical glass fibres in the form of lenses and with a diameter of 0,85 mm or more but not exceeding 1,15 mm, embedded between 2 plastic plates |
0 % |
1.1.2008-31.12.2008 |
ex900290 00 |
40 |
Lens and image gate assembly, for a real-time film scanning system, comprising a lens consisting of 9 or 11 elements and having an illumination function |
0 % |
1.1.2008-31.12.2008 |
ex900290 00 |
50 |
Lenses, mounted, for use in the manufacture of projection TV (1) |
0 % |
1.1.2008-31.12.2008 |
ex900691 00 |
10 |
Parts, for use in the manufacture of products falling within subheading 9006 40 00 (1) |
0 % |
1.1.2008-31.12.2008 |
ex901380 90 |
10 |
Polarisation insensitive fibre-optic isolator, operating at a wavelength of 1 200 nm or more, contained in a cylindrical housing |
0 % |
1.1.2008-31.12.2008 |
ex901380 90 |
20 |
Optical switch, comprising at least one optical input and two optical outputs and with electrical connectors |
0 % |
1.1.2008-31.12.2008 |
ex901790 00 |
10 |
Thermal printer head, comprising at least 7 168 heater elements mounted on 2 or more ceramic supports, the whole contained in a housing the exterior dimensions of which exceed 21 × 39 × 639 mm |
0 % |
1.1.2008-31.12.2008 |
ex902230 00 |
10 |
X-ray tube with a target voltage of 4 kV or more but not exceeding 30 kV, a power not exceeding 9 W and a target current not exceeding 2 mA |
0 % |
1.1.2008-31.12.2008 |
ex902710 90 |
10 |
Sensor element for gas or smoke analysis in motor vehicles, essentially consisting of a zirconium-ceramic element in a metal housing |
0 % |
1.1.2008-31.12.2008 |
ex903180 34 ex903180 38 |
30 30 |
Apparatus for measuring the angle and direction of rotation of motor vehicles, consisting of at least one yaw rate sensor in the form of a monocrystalline quartz, whether or not combined with one or more measuring sensors, the whole contained in a housing |
0 % |
1.1.2008-31.12.2008 |
ex903180 38 |
10 |
Acceleration measurement device for automotive applications, comprising one or more active and/or passive elements and one or more sensors, the whole contained in a housing |
0 % |
1.1.2008-31.12.2008 |
ex903180 38 |
20 |
Machines and apparatus for the automatic testing of the integrity of ink-jet cartridge housings (1) |
0 % |
1.1.2008-31.12.2008 |
ex903190 85 |
20 |
Assembly for a laser align sensor, in the form of a printed circuit comprising optical filters and a charge-coupled image (CCD) sensor, the whole contained in a housing |
0 % |
1.1.2008-31.12.2008 |
ex903210 81 |
20 |
Thermostat, comprising a snap-action switch, for direct mounting on an electric motor coil, contained in a hermetically sealed housing |
0 % |
1.1.2008-31.12.2008 |
(4)ex903210 89 |
20 |
Thermostat, damper or bimetal with, — an opening temperature of +7 °C (-1,5 °C), closing temperature of –4 °C(±1,5 °C)for damper thermostat, — an opening temperature of +8 °C (±3 °C) for bimetal thermostat; for use in the manufacture of frost free refrigerators (1) |
0 % |
1.1.2008-31.12.2012 |
ex903289 00 |
20 |
Automotive airbag shock-sensor, comprising a contact capable of switching a current of 12 A at a voltage of 30 V, having a typical contact resistance of 80 mOhm |
0 % |
1.1.2008-31.12.2008 |
ex903289 00 |
30 |
Electronic controller of eletric power steering (EPS controller) |
0 % |
1.1.2008-31.12.2008 |
(4)ex903289 00 |
40 |
Digital valve controller for controlling liquids and gases |
0 % |
1.1.2008-31.12.2012 |
ex910690 10 |
10 |
Timer assembly, for use in the manufacture of goods of subheading 8516 50 00 (1) |
0 % |
1.1.2008-31.12.2008 |
ex910700 00 |
20 |
Mechanical timer for use in the manufacture of no-frost refrigerators (1) |
0 % |
1.1.2008-31.12.2011 |
ex911012 00 |
91 |
Assembly consisting of a printed circuit on which are mounted one quartz oscillator, at least one watch circuit and, whether or not integrated, at least one capacitor, of a thickness not exceeding 5 mm |
0 % |
1.1.2008-31.12.2008 |
ex911090 00 ex911490 00 |
92 91 |
Assembly consisting of a printed circuit on which is mounted a watch circuit or a watch circuit and a quartz oscillator, of a thickness not exceeding 5 mm |
0 % |
1.1.2008-31.12.2008 |
ex911090 00 |
93 |
Assembly consisting of a printed circuit on which is mounted at least one watch circuit, a quartz oscillator and a piezo-electric sound element, with a thickness exceeding 5 mm |
0 % |
1.1.2008-31.12.2008 |
ex940540 35 |
10 |
Electric light assembly of synthetic material containing 3 fluorescent tubes (RBG) of a diameter of 3,0 mm (±0,2 mm), of a length of 420 mm (±1 mm) or more, but not exceeding 600 mm (±1 mm), for the manufacture of goods of heading 8528 (1) |
0 % |
1.1.2008-31.12.2008 |
(4)ex940540 39 |
10 |
Ambient light module with a length of 300 mm or more, but not exceeding 600 mm, based on a light engine of a series of 3 or more, but not more than 9 specific one chip red green and blue light emitting diodes mounted on a PCB, with light coupled to the front and/or back of the Flat TV set (1) |
0 % |
1.1.2008-30.6.2008 |
ex960891 00 |
10 |
Non-fibrous plastic pen-tips with an internal channel |
0 % |
1.1.2008-31.12.2008 |
ex960891 00 |
20 |
Felt tips and other porous-tips for markers, without internal canal |
0 % |
1.1.2008-31.12.2008 |
ex961210 10 |
10 |
Ribbons of plastic with segments of different colours, providing the penetration of dyes by heat into a support (so called dye-sublimation) |
0 % |
1.1.2008-31.12.2008 |
ex961390 00 |
20 |
Piezo-electric ignition mechanism, whether or not with complementary elements |
0 % |
1.1.2008-31.12.2008 |
(1) Entry under this subheading is subject to conditions laid down in the relevant Community provisions (see Articles 291 to 300 of Commission Regulation (EEC) No 2454/93 — OJ L 253, 11.10.1993, p. 1 and subsequent amendments). (2) However, the measure is not allowed where processing is carried out by retail or catering undertakings. (3) The measure shall apply to fish intended to undergo any operation unless they are intended to undergo exclusively one or more of the following operations: — cleaning, gutting, tailing, heading, — cutting (excluding filleting or cutting of frozen blocks, or splitting of frozen interleaved fillet blocks), — sampling, sorting, — labelling, — packing, — chilling, — freezing, — deep freezing, — thawing, separation. (4) New or amended position. |
( 1 ) OJ No L 302, 19. 10. 1992, p. 1. Regulation as amended by the 1994 Act of Accession.