EUR-Lex Access to European Union law
This document is an excerpt from the EUR-Lex website
Document 02019D0436-20200402
Commission Implementing Decision (EU) 2019/436 of 18 March 2019 on the harmonised standards for machinery drafted in support of Directive 2006/42/EC of the European Parliament and of the Council
Consolidated text: Commission Implementing Decision (EU) 2019/436 of 18 March 2019 on the harmonised standards for machinery drafted in support of Directive 2006/42/EC of the European Parliament and of the Council
Commission Implementing Decision (EU) 2019/436 of 18 March 2019 on the harmonised standards for machinery drafted in support of Directive 2006/42/EC of the European Parliament and of the Council
- Date of document:
- 02/04/2020
- Date of effect:
- 02/04/2020
- Author:
- Not available
- Form:
- Consolidated text
- Link
- Link
- Link
- Select all documents mentioning this document
- Consolidation: basic act:
- 32019D0436
02019D0436 — EN — 02.04.2020 — 002.001
This text is meant purely as a documentation tool and has no legal effect. The Union's institutions do not assume any liability for its contents. The authentic versions of the relevant acts, including their preambles, are those published in the Official Journal of the European Union and available in EUR-Lex. Those official texts are directly accessible through the links embedded in this document
|
COMMISSION IMPLEMENTING DECISION (EU) 2019/436 of 18 March 2019 (OJ L 075 19.3.2019, p. 108) |
Amended by:
|
|
|
Official Journal |
||
|
No |
page |
date |
||
|
COMMISSION IMPLEMENTING DECISION (EU) 2019/1680 of 7 October 2019 |
L 257 |
47 |
8.10.2019 |
|
|
COMMISSION IMPLEMENTING DECISION (EU) 2019/1766 of 23 October 2019 |
L 270 |
94 |
24.10.2019 |
|
|
COMMISSION IMPLEMENTING DECISION (EU) 2019/1863 Text with EEA relevance of 6 November 2019 |
L 286 |
25 |
7.11.2019 |
|
|
COMMISSION IMPLEMENTING DECISION (EU) 2020/480 of 1 April 2020 |
L 102 |
6 |
2.4.2020 |
|
COMMISSION IMPLEMENTING DECISION (EU) 2019/436
of 18 March 2019
on the harmonised standards for machinery drafted in support of Directive 2006/42/EC of the European Parliament and of the Council
Article 1
The references of harmonised standards for machinery drafted in support of Directive 2006/42/EC listed in Annex I to this Decision are hereby published in the Official Journal of the European Union.
The references of harmonised standards drafted in support of Directive 2006/42/EC listed in Annex II to this Decision are hereby published in the Official Journal of the European Union with a restriction.
Article 2
The references of harmonised standards for machinery drafted in support of Directive 2006/42/EC listed in Annex III to this Decision are hereby withdrawn from the Official Journal of the European Union as from the dates set out in that Annex.
Article 3
This Decision shall enter into force on the day of its publication in the Official Journal of the European Union.
ANNEX I
|
No |
Reference of the standard |
Type |
|
1. |
EN ISO 14118:2018 Safety of machinery — Prevention of unexpected start-up (ISO 14118:2017) |
B |
|
2. |
EN 1853:2017 Agricultural machinery — Trailers – Safety |
C |
|
3. |
EN 1870-6:2017 Safety of woodworking machines — Circular sawing machines — Part 6: Circular sawing machines for fire wood |
C |
|
4. |
EN ISO 4254-5:2018 Agricultural machinery — Safety — Part 5: Power-driven soil-working machines (ISO 4254-5:2018) |
C |
|
5. |
EN ISO 4254-7:2017 Agricultural machinery — Safety — Part 7: Combine harvesters, forage harvesters, cotton harvesters and sugar cane harversters (ISO 4254-7:2017) |
C |
|
6. |
EN ISO 4254-8:2018 Agricultural machinery — Safety — Part 8: Solid fertilizer distributors (ISO 4254-8:2018) |
C |
|
7. |
EN ISO 5395-1:2013 Garden equipment — Safety requirements for combustion-engine-powered lawnmowers — Part 1: Terminology and common tests (ISO 5395-1:2013) EN ISO 5395-1:2013/A1:2018 |
C |
|
8. |
EN ISO 5395-3:2013 Garden equipment — Safety requirements for combustion-engine-powered lawnmowers — Part 3: Ride-on lawnmowers with seated operator (ISO 5395-3:2013) EN ISO 5395-3:2013/A1:2017 EN ISO 5395-3:2013/A2:2018 |
C |
|
9. |
EN 12013:2018 Plastics and rubber machines — Internal mixers — Safety requirements |
C |
|
10. |
EN 12999:2011+A2:2018 Cranes — Loader cranes |
C |
|
11. |
EN 13001-3-1:2012+A2:2018 Cranes — General Design — Part 3-1: Limit States and proof competence of steel structure |
C |
|
12. |
EN 13001-3-6:2018 Cranes — General design — Part 3-6: Limit states and proof of competence of machinery — Hydraulic cylinders |
C |
|
13. |
EN 13135:2013+A1:2018 Cranes — Safety — Design — Requirements for equipment |
C |
|
14. |
EN 13684:2018 Garden equipment — Pedestrian controlled lawn aerators and scarifiers – Safety |
C |
|
15. |
EN ISO 13766-2:2018 Earth-moving and building construction machinery — Electromagnetic compatibility (EMC) of machines with internal electrical power supply — Part 2: Additional EMC requirements for functional safety (ISO 13766-2:2018) |
C |
|
16. |
EN 15194:2017 Cycles — Electrically power assisted cycles — EPAC Bicycles |
C |
|
17. |
EN 15895:2011+A1:2018 Cartridge operated hand-held tools — Safety requirements — Fixing and hard marking tools |
C |
|
18. |
EN ISO 16092-1:2018 Machine tools safety — Presses — Part 1: General safety requirements (ISO 16092-1:2017) |
C |
|
19. |
EN ISO 16092-3:2018 Machine tools safety — Presses — Part 3: Safety requirements for hydraulic presses (ISO 16092-3:2017) |
C |
|
20. |
EN 16719:2018 Transport platforms |
C |
|
21. |
EN 16952:2018 Agricultural machinery — Rough-terrain Work Platforms for Orchard's operations (WPO) – Safety |
C |
|
22. |
EN 17059:2018 Plating and anodizing lines — Safety requirements |
C |
|
23. |
EN ISO 19085-4:2018 Woodworking machines — Safety — Part 4: Vertical panel circular sawing machines (ISO 19085-4:2018) |
C |
|
24. |
EN ISO 19085-6:2017 Woodworking machines — Safety — Part 6: Single spindle vertical moulding machines (‘toupies’) (ISO 19085-6:2017) |
C |
|
25. |
EN ISO 19085-8:2018 Woodworking machines — Safety — Part 8: Belt sanding and calibrating machines for straight workpieces (ISO 19085-8:2017) |
C |
|
26. |
EN ISO 19225:2017 Underground mining machines — Mobile extracting machines at the face — Safety requirements for shearer loaders and plough systems (ISO 19225:2017) |
C |
|
27. |
EN ISO 28927-2:2009 Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 2: Wrenches, nutrunners and screwdrivers (ISO 28927-2:2009) EN ISO 28927-2:2009/A1:2017 |
C |
|
28. |
EN ISO/IEC 80079-38:2016 Explosive atmospheres — Part 38: Equipment and components in explosive atmospheres in underground mines (ISO/IEC 80079-38:2016) EN ISO/IEC 80079-38:2016/A1:2018 |
C |
|
29. |
EN 50569:2013 Household and similar electrical appliances — Safety — Particular requirements for commercial electric spin extractors EN 50569:2013/A1:2018 |
C |
|
30. |
EN 50570:2013 Household and similar electrical appliances — Safety — Particular requirements for commercial electric tumble dryers EN 50570:2013/A1:2018 |
C |
|
31. |
EN 50571:2013 Household and similar electrical appliances — Safety — Particular requirements for commercial electric washing machines EN 50571:2013/A1:2018 |
C |
|
32. |
EN 50636-2-107:2015 Safety of household and similar appliances — Part 2-107: Particular requirements for robotic battery powered electrical lawnmowers (IEC 60335-2-107:2012 Modified) EN 50636-2-107:2015/A1:2018 |
C |
|
33. |
EN 60335-1:2012 Household and similar electrical appliances — Safety — Part 1: General requirements (IEC 60335-1:2010 Modified) EN 60335-1:2012/A11:2014 EN 60335-1:2012/A13:2017 |
C |
|
34. |
EN 60335-2-58:2005 Household and similar electrical appliances — Safety — Part 2-58: Particular requirements for commercial electric dishwashing machines (IEC 60335-2-58:2002 Modified) EN 60335-2-58:2005/A2:2015 EN 60335-2-58:2005/A12:2016 |
C |
|
35. |
EN 62841-2-1:2018 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 2-1: Particular requirements for hand-held drills and impact drills (IEC 62841-2-1:2017, Modified) EN 62841-2-1:2018/A11:2019 |
C |
|
36. |
EN 62841-2-17:2017 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 2-17: Particular requirements for hand-held routers (IEC 62841-2-17:2017 Modified) |
C |
|
37. |
EN 62841-3-1:2014 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 3-1: Particular requirements for transportable table saws (IEC 62841-3-1:2014, modified) EN 62841-3-1:2014/A11:2017 |
C |
|
38. |
EN 62841-3-4:2016 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 3-4: Particular requirements for transportable bench grinders (IEC 62841-3-4:2016 Modified) EN 62841-3-4:2016/A11:2017 |
C |
|
39. |
EN 62841-3-6:2014 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 3-6: Particular requirements for transportable diamond drills with liquid system (IEC 62841-3-6:2014, modified) EN 62841-3-6:2014/A11:2017 |
C |
|
40. |
EN 62841-3-9:2015 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 3-9: Particular requirements for transportable mitre saws (IEC 62841-3-9:2014 Modified) EN 62841-3-9:2015/A11:2017 |
C |
|
41. |
EN 62841-3-10:2015 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 3-10: Particular requirements for transportable cut-off machines (IEC 62841-3-10:2015 Modified) EN 62841-3-10:2015/A11:2017 |
C |
|
42. |
EN 62841-3-14:2017 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 3-14: Particular requirements for transportable drain cleaners (IEC 62841-3-14:2017 Modified) |
C |
|
43. |
EN ISO 18497:2018 Agricultural machinery and tractors – Safety of highly automated agricultural machines – Principles for design (ISO 18497:2018) |
B |
|
44. |
EN ISO 19353:2019 Safety of machinery – Fire prevention and fire protection (ISO 19353:2019) |
B |
|
45. |
EN 707:2018 Agricultural machinery – Slurry tankers – Safety |
C |
|
46. |
EN 1459-2:2015+A1:2018 Rough-terrain trucks – Safety requirements and verification – Part 2: Slewing variable-reach trucks |
C |
|
47. |
EN ISO 3691-5:2015 Industrial trucks – Safety requirements and verification – Part 5: Pedestrian-propelled trucks (ISO 3691-5:2014) |
C |
|
48. |
EN ISO 4254-9:2018 Agricultural machinery – Safety – Part 9: Seed drills (ISO 4254-9:2018) |
C |
|
49. |
EN ISO 10517:2019 Powered hand-held hedge trimmers – Safety (ISO 10517:2019) |
C |
|
50. |
EN ISO 11148-13:2018 Hand-held non-electric power tools – Safety requirements – Part 13: Fastener driving tools (ISO 11148-13:2017) |
C |
|
51. |
EN 12012-1:2018 Plastics and rubber machines – Size reduction machines – Part 1: Safety requirements for blade granulators and shredders |
C |
|
52. |
EN 12312-8:2018 Aircraft ground support equipment – Specific requirements – Part 8: Maintenance or service stairs and platforms |
C |
|
53. |
EN 12733:2018 Agricultural and forestry machinery – Pedestrian controlled motor mowers – Safety |
C |
|
54. |
EN 14033-4:2019 Railway applications – Track – Railbound construction and maintenance machines – Part 4: Technical requirements for running, travelling and working on urban rail |
C |
|
55. |
EN 16712-4:2018 Portable equipment for projecting extinguishing agents supplied by firefighting pumps – Portable foam equipment – Part 4: High expansion foam generators PN16 |
C |
|
56. |
EN 16770:2018 Safety of woodworking machines – Chip and dust extraction systems for indoor installation – Safety requirements |
C |
|
57. |
EN 16985:2018 Spray booths for organic coating material – Safety requirements |
C |
|
58. |
EN 17067:2018 Forestry machinery – Safety requirements on radio remote controls |
C |
|
59. |
EN ISO 19296:2018 Mining – Mobile machines working underground – Machine safety (ISO 19296:2018) |
C |
|
60. |
EN ISO 28927-4:2010 Hand-held portable power tools – Test methods for evaluation of vibration emission – Part 4: Straight grinders (ISO 28927-4:2010) EN ISO 28927-4:2010/A1:2018 |
C |
|
61. |
EN 60204-1:2018 Safety of machinery – Electrical equipment of machines – Part 1: General requirements (IEC 60204-1:2016, Modified) |
B |
|
62. |
EN IEC 60204-11:2019 Safety of machinery – Electrical equipment of machines – Part 11: Requirements for equipment for voltages above 1 000 V AC or 1 500 V DC and not exceeding 36 kV (IEC 60204-11:2018) |
B |
|
63. |
EN 62841-4-2:2019 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 4-2: Particular requirements for hedge trimmers (IEC 62841-4-2:2017, Modified) |
C |
|
64. |
EN 62841-3-12:2019 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 3-12: Particular requirements for transportable threading machines (IEC 62841-3-12:2017) |
C |
|
65. |
EN 62841-2-21:2019 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 2-21: Particular requirements for hand-held drain cleaners (IEC 62841-2-21:2017, Modified) |
C |
|
66. |
EN ISO 20607:2019 Safety of machinery – Instruction handbook – General drafting principles (ISO 20607:2019) |
B |
|
67. |
EN ISO 19085-7:2019 Woodworking machines – Safety – Part 7: Surface planing, thickness planing, combined surface/thickness planing machines (ISO 19085-7:2019) |
C |
|
68. |
EN 1114-3:2019 Plastics and rubber machines – Extruders and extrusion lines – Part 3: Safety requirements for haul-offs |
C |
|
69. |
EN 1127-1:2019 Explosive atmospheres – Explosion prevention and protection – Part 1: Basic concepts and methodology |
B |
ANNEX II
|
No |
Reference of the standard |
Type |
|
1. |
EN 474-1:2006+A5:2018 Earth-moving machinery — Safety — Part 1: General requirements Notice: This publication does not concern clause 5.8.1 Visibility — Operator's field of view of this standard, but only in relation with EN 474-5:2006+A3:2013 requirements for hydraulic excavators, the application of which does not confer a presumption of conformity to the essential health and safety requirements 1.2.2 and 3.2.1 of Annex I to Directive 2006/42/EC. |
C |
|
2. |
EN 13241:2003+A2:2016 Industrial, commercial, garage doors and gates — Product standard, performance characteristics Notice: With regard to paragraphs 4.2.2, 4.2.6, 4.3.2, 4.3.3, 4.3.4, 4.3.6, this publication does not concern the reference to EN 12453:2000, the application of which does not confer a presumption of conformity to the essential health and safety requirements 1.3.7 and 1.4.3 of Annex I to Directive 2006/42/EC. |
C |
|
3. |
EN ISO 19085-3:2017 Woodworking machines – Safety requirements – Part 3: Numerically controlled (NC) boring and routing machines Notice: With regard to its point 6.6.2.2.3.1, the harmonised standard EN ISO 19085-3:2017 does not confer a presumption of conformity with the essential health and safety requirement set out in point 1.4.1 of Annex I to Directive 2006/42/EC, which requires that guards and protective devices must not be easy to by-pass. |
C |
ANNEX III
|
No |
Reference of standard |
Date of withdrawal |
Type |
|
1. |
EN 1037:1995+A1:2008 Safety of machinery — Prevention of unexpected start-up |
19 September 2020 |
B |
|
2. |
EN 474-1:2006+A4:2013 Earth-moving machinery — Safety — Part 1: General requirements Notice: This publication does not concern clause 5.8.1 Visibility — Operator’s field of view of this standard, the application of which does not confer a presumption of conformity to the essential health and safety requirements 1.2.2 and 3.2.1 of Annex I to Directive 2006/42/EC. |
19 September 2020 |
C |
|
3. |
EN 1853:1999+A1:2009 Agricultural machinery — Trailers with tipping body – Safety |
19 September 2020 |
C |
|
4. |
EN 1870-6:2002+A1:2009 Safety of woodworking machines — Circular sawing machines — Part 6: Circular sawing machines for firewood and dual purpose circular sawing machines for firewood/circular saw benches, with manual loading and/or unloading |
19 September 2020 |
C |
|
5. |
EN ISO 4254-5:2009 Agricultural machinery — Safety — Part 5: Power-driven soil-working machines (ISO 4254-5:2008) |
19 September 2020 |
C |
|
6. |
EN ISO 4254-7:2009 Agricultural machinery — Safety — Part 7: Combine harvesters, forage harvesters and cotton harvesters (ISO 4254-7:2008) |
19 September 2020 |
C |
|
7. |
EN 14017:2005+A2:2009 Agricultural and forestry machinery — Solid fertilizer distributors – Safety |
19 September 2020 |
C |
|
8. |
EN ISO 5395-1:2013 Garden equipment — Safety requirements for combustion-engine-powered lawnmowers — Part 1: Terminology and common tests (ISO 5395-1:2013) |
19 September 2020 |
C |
|
9. |
EN ISO 5395-3:2013 Garden equipment — Safety requirements for combustion-engine-powered lawnmowers — Part 3: Ride-on lawnmowers with seated operator (ISO 5395-3:2013) EN ISO 5395-3:2013/A1:2017 |
19 September 2020 |
C |
|
10. |
EN 12013:2000+A1:2008 Plastics and rubber machines — Internal mixers — Safety requirements |
19 September 2020 |
C |
|
11. |
EN 12999:2011+A1:2012 Cranes — Loader cranes |
19 September 2020 |
C |
|
12. |
EN 13001-3-1:2012+A1:2013 Cranes — General Design — Part 3-1: Limit States and proof competence of steel structure |
19 September 2020 |
C |
|
13. |
EN 13135:2013 Cranes — Safety — Design — Requirements for equipment |
19 September 2020 |
C |
|
14. |
EN 13684:2004+A3:2009 Garden equipment — Pedestrian controlled lawn aerators and scarifiers – Safety |
19 September 2020 |
C |
|
15. |
EN 15895:2011 Cartridge operated hand-held tools — Safety requirements — Fixing and hard marking tools |
19 September 2020 |
C |
|
16. |
EN 692:2005+A1:2009 Machine tools — Mechanical presses — Safety |
19 September 2021 |
C |
|
17. |
EN 693:2001+A2:2011 Machine tools — Safety — Hydraulic presse |
19 March 2021 |
C |
|
18. |
EN 13736:2003+A1:2009 Safety of machine tools — Pneumatic presses |
19 September 2021 |
C |
|
19. |
EN 848-1:2007+A2:2012 Safety of woodworking machines — One side moulding machines with rotating tool — Part 1: Single spindle vertical moulding machines |
19 September 2020 |
C |
|
20. |
EN 1710:2005+A1:2008 Equipment and components intended for use in potentially explosive atmospheres in underground mines |
19 September 2020 |
C |
|
21. |
EN 50569:2013 Household and similar electrical appliances — Safety — Particular requirements for commercial electric spin extractors |
12 January 2021 |
C |
|
22. |
EN 50570:2013 Household and similar electrical appliances — Safety — Particular requirements for commercial electric tumble dryers |
12 January 2021 |
C |
|
23. |
EN 50571:2013 Household and similar electrical appliances — Safety — Particular requirements for commercial electric washing machines |
12 January 2021 |
C |
|
24. |
EN 50636-2-107:2015 Safety of household and similar appliances — Part 2-107: Particular requirements for robotic battery powered electrical lawnmowers (IEC 60335-2-107:2012 Modified) |
12 January 2020 |
C |
|
25. |
EN 60335-1:2012 Household and similar electrical appliances — Safety — Part 1: General requirements (IEC 60335-1:2010 Modified) EN 60335-1:2012/A11:2014 |
3 May 2020 |
C |
|
26. |
EN 60745-2-1:2010 Hand-held motor-operated electric tools — Safety — Part 2-1: Particular requirements for drills and impact drills (IEC 60745-2-1:2003 Modified + A1:2008) |
19 January 2022 |
C |
|
27. |
EN 60745-2-17:2010 Hand-held motor-operated electric tools — Safety — Part 2-17: Particular requirements for routers and trimmers (IEC 60745-2-17:2010 Modified) |
15 December 2021 |
C |
|
28. |
EN 62841-3-1:2014 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 3-1: Particular requirements for transportable table saws (IEC 62841-3-1:2014, modified) |
19 October 2019 |
C |
|
29. |
EN 61029-2-4:2011 Safety of transportable motor-operated electric tools — Part 2-4: Particular requirements for bench grinders (IEC 61029-2-4:1993 Modified + A1:2001 Modified) |
24 June 2020 |
C |
|
30. |
EN 62841-3-6:2014 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 3-6: Particular requirements for transportable diamond drills with liquid system (IEC 62841-3-6:2014, modified) |
19 October 2019 |
C |
|
31. |
EN 62841-3-9:2015 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 3-9: Particular requirements for transportable mitre saws (IEC 62841-3-9:2014 Modified) |
15 November 2019 |
C |
|
32. |
EN 62841-3-10:2015 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 3-10: Particular requirements for transportable cut-off machines (IEC 62841-3-10:2015 Modified) |
19 October 2019 |
C |
|
33. |
EN 13241:2003+A2:2016 Industrial, commercial, garage doors and gates — Product standard, performance characteristics |
19 September 2020 |
C |
|
34. |
EN 786:1996+A2:2009 Garden equipment — Electrically powered walk- behind and hand-held lawn trimmers and lawn edge trimmers — Mechanical safety |
19 September 2020 |
C |
|
35. |
EN 1870-14:2007+A2:2012 Safety of woodworking machines — Circular sawing machines — Part 14: Vertical panel sawing machines |
19 September 2020 |
C |
|
36. |
EN 61496-1:2013 Safety of machinery — Electro-sensitive protective equipment — Part 1: General requirements and tests |
19 September 2020 |
C |
|
37. |
EN ISO 11200:2014 Acoustics — Noise emitted by machinery and equipment — Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions |
19 September 2020 |
B |
|
38. |
EN 1870-13:2007+A2:2012 Safety of woodworking machines — Circular sawing machines — Part 13: Horizontal beam panel sawing machines |
19 September 2020 |
C |
|
39. |
EN ISO 28927-4:2010 Hand-held portable power tools – Test methods for evaluation of vibration emission – Part 4: Straight grinders (ISO 28927-4:2010) |
2 April 2020 |
C |
|
40. |
EN ISO 19353:2016 Safety of machinery – Fire prevention and fire protection (ISO 19353:2015) |
2 October 2021 |
B |
|
41. |
EN 707:1999+A1:2009 Agricultural machinery – Slurry tankers – Safety |
2 October 2021 |
C |
|
42. |
EN 792-13:2000+A1:2008 Hand-held non-electric power tools – Safety requirements – Part 13: Fastener driving tools |
2 October 2021 |
C |
|
43. |
EN 1889-1:2011 Machines for underground mines – Mobile machines working underground – Safety – Part 1: Rubber tyred vehicles |
2 October 2021 |
C |
|
44. |
EN ISO 3691-5:2014 Industrial trucks – Safety requirements and verification – Part 5: Pedestrian-propelled trucks (ISO 3691-5:2014) EN ISO 3691-5:2014/AC:2014 |
2 October 2021 |
C |
|
45. |
EN ISO 10517:2009 Powered hand-held hedge trimmers – Safety (ISO 10517:2009) EN ISO 10517:2009/A1:2013 |
2 October 2021 |
C |
|
46. |
EN 12012-1:2007+A1:2008 Plastics and rubber machines – Size reduction machines – Part 1: Safety requirements for blade granulators |
2 October 2021 |
C |
|
47. |
EN 12012-3:2001+A1:2008 Plastics and rubber machines – Size reduction machines – Part 3: Safety requirements for shredders |
2 October 2021 |
C |
|
48. |
EN 12312-8:2005+A1:2009 Aircraft ground support equipment – Specific requirements – Part 8: Maintenance stairs and platforms |
2 October 2021 |
C |
|
49. |
EN 12733:2001+A1:2009 Agricultural and forestry machinery – Pedestrian controlled motor mowers – Safety |
2 October 2021 |
C |
|
50. |
EN 12981:2005+A1:2009 Coating plants – Spray booths for application of organic powder coating material – Safety requirements |
2 October 2021 |
C |
|
51. |
EN 13355:2004+A1:2009 Coating plants – Combined booths – Safety requirements |
2 October 2021 |
C |
|
52. |
EN 14018:2005+A1:2009 Agricultural and forestry machinery – Seed drills – Safety |
2 October 2021 |
C |
|
53. |
EN 60204-1:2006 Safety of machinery – Electrical equipment of machines – Part 1: General requirements (IEC 60204-1:2005, Modified) EN 60204-1:2006/AC:2010 EN 60204-1:2006/A1:2009 |
2 October 2021 |
B |
|
54. |
EN 60204-11:2000 Safety of machinery – Electrical equipment of machines – Part 11: Requirements for HV equipment for voltages above 1 000 V a.c. or 1 500 V d.c. and not exceeding 36 kV (IEC 60204-11:2000) EN 60204-11:2000/AC:2010 |
2 October 2021 |
B |
|
55. |
EN 848-3:2012 Safety of woodworking machines – One side moulding machines with rotating tool – Part 3: Numerically controlled (NC) boring and routing machines |
2 October 2021 |
C |
|
56. |
EN ISO 28927-2:2009 Hand-held portable power tools – Test methods for evaluation of vibration emission – Part 2: Wrenches, nutrunners and screwdrivers (ISO 28927-2:2009) |
2 October 2021 |
C |
|
57. |
EN 60745-2-21:2009 Hand-held motor-operated electric tools – Safety – Part 2-21: Particular requirements for drain cleaners (IEC 60745-2-21:2002, Modified) EN 60745-2-21:2009/A1:2010 |
2 October 2021 |
C |
|
58. |
EN 859:2007+A2:2012 Safety of woodworking machines – Hand fed surface planing machines |
2 October 2021 |
C |
|
59. |
EN 860:2007+A2:2012 Safety of woodworking machines – One side thickness planing machines |
2 October 2021 |
C |
|
60. |
EN 861:2007+A2:2012 Safety of woodworking machines – Surface planing and thicknessing machines |
2 October 2021 |
C |
|
61. |
EN 1114-3:2001+A1:2008 Plastics and rubber machines – Extruders and extrusion lines – Part 3: Safety requirements for haul-offs |
2 October 2021 |
C |
|
62. |
EN 1127-1:2011 Explosive atmospheres – Explosion prevention and protection – Part 1: Basic concepts and methodology |
2 October 2021 |
B |
|
63. |
EN 1459-2:2015 Rough-terrain trucks – Safety requirements and verification – Part 2: Slewing variable-reach trucks |
2 October 2021 |
C |
