?

Avis juridique important The document is not available in one of the selected languages. Please choose another one from the drop-down list.
 
| 
31992R1626 
Council Regulation (EEC) No 1626/92 of 5 June 1992 temporarily suspending the autonomous Common Customs Tariff duties on a number of industrial products (in the microelectronics and related sectors) 
 
 
 
Official Journal L 178 , 01/07/1992 P. 0001 - 0110 
 
 
 
COUNCIL REGULATION (EEC) No 1626/92 of 5 June 1992 temporarily suspending the autonomous Common Customs Tariff duties on a number of industrial products (in the microelectronics and related sectors) 
THE COUNCIL OF THE EUROPEAN COMMUNITIES, 
Having regard to the Treaty establishing the European Economic Community, and in particular Article 28 thereof, 
Having regard to the proposal from the Commission, 
Whereas production of the products referred to in this Regulation is at present inadequate or non-existent within the Community and producers are thus unable to meet the needs of user-industries in the Community; 
Whereas it is in the Community's interest in certain cases to suspend the autonomous Common Customs Tariff duties only partially, particularly because of the existence of Community production, and in other cases to suspend them completely; 
Whereas, taking account of the difficulties involved in accurately assessing the development of the economic situation in the sectors concerned in the near future, these suspension measures should be taken only temporarily, by fixing their period of validity by reference to the interests of Community production, 
HAS ADOPTED THIS REGULATION: 
Article 1 
The autonomous Common Customs Tariff duties for the products listed in the Annexes shall be suspended at the level indicated in respect of each of them. 
These suspensions shall apply from: 
- 1 July to 31 December 1992 for the products referred to in Table I, 
- 1 July 1992 to 30 June 1993 for the products referred to in Table II. 
Article 2 
This Regulation shall enter into force on 1 July 1992. 
This Regulation shall be binding in its entirety and directly applicable in all Member States. 
Done at Luxembourg, 5 June 1992. 
For the Council The President Joaquim FERREIRA DO AMARAL 
ANNEX 
TABLE I ex 8471 93 5010Floppy-disc storage units0ex 8471 93 5030Disc-storage unit, capable of parallel data-transfer via 1, 4, 5 or 6 channels at, respectively, a rate per second of 3,014 megabytes, 12,05 megabytes, 15,07 megabytes or 18,08 megabytes, comprising 8 rigid magnetic discs with an external diameter of 20,32 cm (8 inch) with a total storage capacity, unformatted, not exceeding 1 000,2 megabytes and incorporating a storage-module-drive (SMD) interface0ex 8473 30 9015Metal ball coated with plastic or rubber material, with a diameter not exceeding 26 mm and a weight of 38 g or more, for use in the manufacture of a pointing device (so-called 'mouse') (a)0ex 8473 30 9035Mechanical encoder, consisting of a disc, contact-brushes, a bearing, a spacer and a rotational shaft, mounted in a casing with 3 connections, and having a withstanding voltage of 50 V AC for at least 1 minute0ex 8473 30 9060Drive-unit for magneto-optical discs with an external diameter of 13,34 cm (5,25 inch)0ex 8501 10 9952DC motor, brushless, with a torque not exceeding 0,20 Nm, with a coupling flange of a diameter of 77 mm and a precision-made chuck of 44 mm, with an outside rotor of a diameter not exceeding 55 mm, a four-phase winding, a rated speed of 3 600 rpm, a supply voltage of 12 V (±10 %) and fitted with wires and connectors0ex 8501 10 9958Direct-current bipolar stepping motor with a single stator, an output of not more than 37,5 W, an angle of step of 180,° two steps per rotation, a two-phase rotation cycle and single-pole winding, an output torque of 0,1×10-6 Nm or more but not exceeding 0,1×10-4 Nm and a supply voltage not exceeding 3 V0ex 8501 10 9963DC motor, brushless, with a torque not exceeding 0,018 Nm, with a coupling flange of a diameter of 35 mm and a precision-made chuck of a diameter of 25 mm, with an internal rotor, a three-phase winding, a rated speed of 3 600 rpm and a supply voltage of 12 V (±10 %)0ex 8501 10 9964Hybrid stepping motor with an angle of step of 1,8°, 200 steps per revolution, a four-phase rotation sequence and single-pole windings, comprising a rotor and a laminated stator enclosed between two square section flanges with sides not exceeding 42 mm and fitted with biterminate shaft and wires and connectors0ex 8501 10 9966DC motor, brushless, with a torque not exceeding 0,018 Nm, with a coupling flange of a diameter of 26 mm and a precision-made chuck of 20 mm, with an internal rotor, a three-phase winding, a rated speed of 3 600 rpm and a supply voltage of 12 V (±10 %)0ex 8501 10 9968DC motor, brushless, with a typical running torque not exceeding 0,0005 Nm, with a chuck of a diameter of 20 mm (±1 mm), a rated speed of 3 486 (±0,1 %) rpm and a supply voltage of 5 V (±10 %), mounted on a support the dimensions of which do not exceed 71×103 mm, fitted with a connector and conductor elements0ex 8501 10 9969DC motor, brushless, with a typical running torque not exceeding 0,002 Nm, with a coupling flange of a diameter of 27,5 mm (±1 mm), a coupling flange of a diameter of 15 mm (±1 mm) and a chuck of a diameter of 25 mm (±1 mm), with an internal rotor, a three-phase winding, a rated speed of 3 409 (±0,1 %) rpm and a supply voltage of 12 V (±10 %)0ex 8501 10 9970DC motor, brushless, with a typical running torque not exceeding 0,001 Nm, with a coupling flange of a diameter of 57 mm (±1 mm), a coupling flange of a diameter of 43,5 mm (±1 mm) and a chuck of a diameter of 25 mm (±1 mm), with an internal rotor, a three-phase winding, a rated speed of 3 575 (±0,1 %) rpm and a supply voltage of 12 V (±10 %)0ex 8517 90 9801Thermal printer head with 1 728 dots of thick or thin film technology, consisting of a ceramic substrate comprising heater elements, contained in a housing, the exterior dimensions of which do not exceed 20×37×240 mm0ex 8517 90 9802Assembly consisting of: 
-a flat screen monochrome cathode-ray tube with a diagonal measurement of the screen of 100 mm or more but not exceeding 110 mm and equipped with a deflector yoke, and 
-a printed circuit on which are mounted a deflection unit, a video-amplifier and a transformer, 
the whole mounted on a chassis, for the manufacture of video entry-phones (a)0ex 8522 90 9991Single cassette-deck sub-assembly with a total thickness not exceeding 53 mm, for use in the manufacture of sound recording and reproducing apparatus (a)0ex 8529 90 7092Signal-processing module, consisting of a printed circuit, comprising at least: 
-a microprocessor for video signals, 
-a microprocessor for deflection signals, 
-a microprocessor for teletext, 
-a video encoder/decoder, 
for use in the manufacture of digital colour television receivers (a)0ex 8529 90 9891Interline charge-coupled image sensor with filter, the dimensions of which do not exceed 43×59 mm0ex 8529 90 9892Surface acoustic wave filter unit for a frequency of 45,5 MHz (±50 kHz) and a bandwidth of 3 dB at 340 kHz or of 20 dB at 950 kHz, contained in a housing the exterior dimensions of which do not exceed 5×13×21 mm, with not more than 6 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
45.5A 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8529 90 9893Voltage-controlled oscillator, having an oscillation-frequency of 915 MHz or more at 4,5 V and not exceeding 890 MHz at 1 V, contained in a housing the exterior dimensions of which do not exceed 5×10×15 mm, with not more than 4 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
VW995S05 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8531 20 9050Monochrome liquid crystal display (LCD), consisting of a layer of liquid crystals between two glass sheets or plates with 256 000 dots or more, mounted on a printed circuit board comprising electronic components providing drive and/or control functions0ex 8536 50 19 
ex 8536 50 9091 
91Reed switches in the form of a glass capsule containing a small quantity of mercury and not more than 3 electrical contacts on metal arms0ex 8540 30 1034Colour cathode-ray tube with a dot mask, equipped with electron guns placed side by side (in-line technology), with a diagonal measurement of the screen of more than 72 cm and, either a distance of less than 0,5 mm between dots of the same colour or a pitch of less than 0,5 mm0ex 8540 30 1035Colour cathode-ray tube with a dot mask, equipped with electron guns placed side by side (in-line technology), having a diagonal measurement of the screen not exceeding 72 cm0ex 8540 91 0091Deflector yoke for cathode-ray tubes with an operating frequency of 31 250 Hz or more but not exceeding 64 000 Hz, incorporating a quadripolar magnet0ex 8540 99 0091Anode, cathode or output part, for the manufacture of magnetrons of subheading 8540 41 00 (a)0ex 8541 29 9030Field-effect transistor (FET), having a drain-to-source breakdown-voltage of 50 V, operating with a drain-current of 8,2 A, a drain-to-source resistance not exceeding 0,2 ohm, and with a dissipation rate not exceeding 25 W, contained in a housing the exterior dimensions of which do not exceed 6×7 mm, with not more than 3 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
IRFR 010 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8541 40 1070Light-emitting diode (LED), made from aluminium-gallium-arsenic (AlGaAs) semiconductor, having a square base with an edge length not exceeding 8,2 mm, having a primary lens0ex 8541 40 1080Light-emitting diode (LED) of Transparent Substrate (TS) technology, made from aluminium-gallium-arsenic (AlGaAs) semiconductor, having a luminous intensity of 1,4 candela or more at 20 mA0ex 8542 11 0520Driver circuit for liquid crystal displays (LCDs) of C-MOS technology, with 40 or more output channels, and having a drive voltage of more than 10 V, in the form of a monolithic integrated circuit not contained in a housing (microchip), for the manufacture of liquid crystal display (LCD) modules (a)0ex 8542 11 1402Dual or triple port dynamic random-access memory (D-RAM), with data registers and a serial read output control, with a storage capacity of 1 Mbit, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 14×51 mm, with not more than 40 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
TC 524256 
TC 524257 
TC 528126 
TC 528128 
M5M 442256 
MB 81 C 4251 
MT 42 C 4256 
MT 43 C 4257 
MT 43 C 4258 
TMS 44 C 251 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 1602Dynamic random-access memory of C-MOS technology (C-MOS D-RAM), with a storage capacity of 256 K×16 bits and an access time not exceeding 80 ns, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 11×27 mm, with not more than 40 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
MT 4C16256 
PD 424260 
PD 424170 
or 
-other identification markings relating to devices complying with the abovementioned description 10ex 8542 11 1801Dynamic random-access memory of C-MOS technology (C-MOS D-RAM), with a storage capacity of 256 K×18 bits and an access time not exceeding 80 ns, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 11×27 mm, with not more than 40 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
PD 424280 
or 
-other identification markings relating to devices complying with the abovementioned description 10ex 8542 11 2101Static random-access memory of C-MOS technology (C-MOS S-RAM), with a storage capacity of 16×4 bits and an access time not exceeding 35 ns, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 9×21 mm, with not more than 16 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
CY27S03 
CY27S07 
CY54S189 
CY74S189 
CY7C189 
CY7C190 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 2111Static random-access memory (S-RAM) with a storage capacity of 256 bits superimposed bit-for-bit on an electrically erasable, programmable, read only memory (E2PROM), in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 8×24 mm, with not more than 18 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
X 2210 
X 2443 
X 2444 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 2121Static random-access memory (S-RAM) with a storage capacity of 1 Kbit, superimposed bit-for-bit on an electrically erasable, programmable, read only memory (E2PROM), in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×33 mm, with not more than 24 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
X 2001 
X 2201 A 
X 2212 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 2122Static random-access memory (S-RAM) with a storage capacity of 2 Kbits, superimposed bit-for-bit on an electrically erasable, programmable, read only memory (E2PROM), in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×39 mm, with not more than 28 connections and bearing: 
- an identification marking consisting of or including the following combination of figures and letters: 
X 2002 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 2127Static random-access memory (S-RAM) with a storage capacity of 4 Kbits, superimposed bit-for-on an electrically erasable, programmable, read only memory (E2PROM), in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×39 mm, with not more than 28 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
X 2004 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 2137Non-volatile static random access memory of C-MOS technology (C-MOS non-volatile S-RAM), with a capacity of 16 Kbits and an internal energy source, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 19×40 mm, with not more than 28 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
DS 1220 Y 
MK 48 Z 02 
or 
-other identification markings relating to devices complying with the abovementioned description7ex 8542 11 2147Non-volatile static random-access memory of C-MOS technology (C-MOS non-volatile S-RAM), with a storage capacity of 64 Kbits and an internal energy source, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 20×42 mm, with not more than 28 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
BQ 4010 
DS 1225 Y 
or 
-other identification markings relating to devices complying with the abovementioned description0 
ex 8542 11 2320Dual port static random-access cache memory of C-MOS technology (C-MOS dual port S-Cache-RAM), with a storage capacity of 256 Kbits, comprising a bus-memory control circuit, a bus control circuit of a central processing unit (CPU), an address-latch and 2 multiplexers, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 45×45 mm, with not more than 84 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
82490XP 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 2321Non-volatile static random-access memory of C-MOS technology (C-MOS non-volatile S-RAM), with a storage capacity of 256 Kbits and an internal energy source, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 19×40 mm, with not more than 28 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
BQ 4011 
DS 1230 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 2323Static random access memory of C-MOS technology (C-MOS S-RAM), with a storage capacity of 32 K×8 bits and an access time exceeding 55 ns, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×39 mm, with not more than 32 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
HM 62256 
HY 62C256 
MB 84256 
PD 43256 
TC 55257 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 2325Static random-access memory of C-MOS technology (C-MOS S-RAM), with a storage capacity of 64 K×4 bits and an access time not exceeding 15 ns, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 9×30 mm, with not more than 32 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
MCM 6208 
MCM 62980 
MCM 62983 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 2501Static random-access memory (S-RAM), with a storage capacity of 288 Kbits and an access time not exceeding 40 ns, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 8×41 mm, with not more than 32 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
TC 55329 
TC 55B329 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 2510Static random-access memory (S-RAM), with a storage capacity of 1 Mbit, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×44 mm, with not more than 44 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
CXK581020 
CY7C101 
CY7C102 
CY7C106 
CY7C107 
CY7C108 
CY7C109 
HM 621100A 
HM 624256 
HM 624257 
M5M 51004 
M5M 51008 
MCM 6228 
MT 5C1008 
TC 551001 
TC 55B4256 
TC 55B4257 
TC 55B8128 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 2511Static random-access memory of C-MOS technology (C-MOS S-RAM), with a storage capacity of 512 Kbits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 12×28 mm, with not more than 40 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
TC 551632 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 2512Non-volatile static random-access memory of C-MOS technology (C-MOS non-volatile S-RAM), with a storage capacity of 1 Mbit and an internal energy source, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 19×44 mm, with not more than 32 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
BQ 4013 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 2701Non-volatile static random-access memory of C-MOS technology (C-MOS non-volatile S-RAM), with a storage capacity of 2 Mbits and an internal energy source, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 19×54 mm, with not more than 40 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
BQ 4014 
BQ 4024 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 2702Non-volatile static random-access memory of C-MOS technology (C-MOS non-volatile S-RAM), with a storage capacity of 4 Mbits and an internal energy source, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 19×54 mm, with not more than 40 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
BQ 4015 
BQ 4025 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 3106Read only memory, non-programmable of C-MOS technology (C-MOS ROM) with a storage capacity of 1 Mbit, comprising a serial data output port, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×43 mm, with not more than 32 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
TMS 60C80 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 3111Read only memory, non-programmable of C-MOS technology (C-MOS ROM), with a storage capacity of 8 Mbits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 14×54 mm, with not more than 44 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
TC 538200 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 3116Read only memory, non-programmable of C-MOS technology (C-MOS ROM), with a storage capacity of 16 Mbits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 14×54 mm, with not more than 44 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
TC 5316200 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 42 
ex 8542 11 5921 
61 
UV erasable or non-erasable, programmable, read only memory (EPROM or PROM), with a storage capacity of 256 Kbits and an access time of less than 80 ns, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×39 mm, with not more than 32 connections, with or without a quartz window on the upper surface and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
CY 7C 271 
CY 7C 274 
CY 7C 277 
CY 7C 279 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 4406Flash electrically erasable, programmable, read only memory (Flash-E2PROM), with a storage capacity of 1 Mbit, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 18×53 mm, with not more than 48 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
28 F 010 
28 F 210 
48 F 010 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 4601Flash electrically erasable, programmable, read only memory (Flash-E2PROM) with a storage capacity of 2 Mbits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×42 mm, with not more than 32 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
28 F 020 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 48 
ex 8542 11 5901 
66 
UV erasable or non-erasable, programmable, read only memory (EPROM or PROM), with a storage capacity of 8 Mbits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 16×56 mm, with not more than 42 connections, with or without a quartz window on the upper surface and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
TC 578200 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 48 
ex 8542 11 5902 
67 
UV erasable or non-erasable, programmable, read only memory (EPROM or PROM), with a storage capacity of 16 Mbits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 16×56 mm, with not more than 42 connections, with or without a quartz window on the upper surface and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
TC 5716200 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 5001Electrically erasable, programmable, read only memory (E2PROM), with a storage capacity of 16 Kbits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×42 mm, with not more than 32 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
24 C 16 
28 C 16 
28 C 17 
38 C 16 
52 B 13 
AM 2817 
X2816 
or 
-other identification markings relating to devices complying with the abovementioned description0 
ex 8542 11 5002Electrically erasable, programmable, read only memory (E2PROM), with a storage capacity of 512 Kbits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×42 mm, with not more than 32 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
X 28C512 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 5006Electrically erasable, programmable, read only memory (E2PROM), with a storage capacity of 64 Kbits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×39 mm, with not more than 32 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
28 C 64 
AM 2864 BE 
HN 58C65 
MBM 28 C 65 
X2864 A 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 5926FIFO (first in, first out) read/write memory of C-MOS technology, for simultaneous reading and writing in one clocksignal, with a storage capacity of 512×9 bits and an access time not exceeding 40 ns, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 12×43 mm, with not more than 32 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
CY7C441 
CY7C451 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 5927FIFO (first in, first out) read/write memory of C-MOS technology, for simultaneous reading and writing in one clocksignal or bidirectional, with a storage capacity of 18 Kbits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 13×43 mm, with not more than 32 connections and bearing: 
-an identification marking consisting of or including one of the following combinationsof figures and letters: 
CY7C439 
CY7C443 
CY7C453 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 62 
ex 8542 11 64 
ex 8542 11 6701 
01 
01 
Coprocessor of C-MOS technology, for multiple interfacing a parallel system bus to 8, 16 or 32 bits central processing units (CPUs), in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 41×41 mm, with not more than 149 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures or figures and letters: 
82389 
82C389 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 6440Microprocessor of C-MOS technology, with a processing capacity of 16 bits, consisting of a central processing unit (CPU) and an 8-bit or 16-bit external data-bus, contained in a housing the exterior dimensions of which do not exceed 36×54 mm, with not more than 132 connections and bearing: 
ex 8542 11 64 
(cont'd)-an identification marking consisting of or including one of the following combinations of figures and letters: 
80 C 186 
80 C 188 
80 C 196 
80 C 296 
ADSP 2100 
DSP 56116 
DSP 56156 
DSP 56200 
XSP 56200 
Z 280 
Z 70108 
Z 70116 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 6443Microprocessor of C-MOS technology, with a processing capacity of 16 bits, comprising a 4-channel direct memory access (DMA) controller, a universal asynchronous receiver/transmitter (UART), three 16-bit timer/counters, an 8-channel interrupt-controller, a memory-refresh controller, a clock-generator and a bus-controller with wait-state generator, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 28×29 mm, with not more than 120 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
PD 70236 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 6739Microprocessor of C-MOS technology, with a processing capacity of 32 bits, comprising a 32-bit external data-bus and a 26-bit external address-bus, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 29×29 mm, with not more than 160 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
86C020 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 6740Microprocessor of C-MOS technology, with a processing capacity of 32 bits, comprising a static random-access cache memory (S-Cache-RAM) with a storage capacity of 64 Kbits for instruction and data stream and a static random-access cache memory (S-Cache-RAM) with a storage capacity of 16 Kbits for instruction stream only, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 62×62 mm, with not more than 431 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
DC 262 A 
or 
-other identification markings elating to devices complying with the abovementioned description0ex 8542 11 7107Microcontroller or microcomputer of C-MOS technology, with a processing capacity of 4 bits, providing driver-functions for liquid crystal displays (LCDs), comprising a read only memory, non-programmable (ROM) with a storage capacity of 108 or 216 Kbits, a random-access memory (RAM) with a storage capacity of 7196 or 16 412 bits, and 3 oscillators, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 22×22 mm, with not more than 100 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
TMC-17 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 7134Microcontroller or microcomputer of C-MOS technology, with a processing capacity of 8 bits, comprising a random-access memory (RAM) with a storage capacity of 2 or 8 Kbits, an electrically erasable, programmable, read only memory (E2PROM) with a storage capacity of 4 Kbits and an 8-channel analogue-to-digital converter, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 25×25 mm, with not more than 68 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
MC 68HC11F 
SC 415111FU 
SC 805666FN 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 7135Microcontroller or microcomputer of C-MOS technology, with a processing capacity of 8 bits, comprising a read only memory, non-programmable (ROM) with a storage capacity of 32 Kbits, a random-access memory (RAM) with a storage capacity of 1 Kbit, an 8-channel analogue-to-digital converter, two 16-bit timers each with two 16-bit registers and a serial synchronous communications interface consisting of an 8-bit serial shift register with serial data input, serial data output and serial shift clock, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 18×53 mm, with not more than 44 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
COP 884CF 
COP 888CF 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 7136Microcontroller or microcomputer of C-MOS technology, with a processing capacity of 8 bits, consisting of a read only memory, non-programmable (ROM) with a storage capacity of 32 Kbits, a random-access memory (RAM) with a storage capacity of 1,5 Kbits, a full duplex universal asynchronous receiver/transmitter (UART), 2 analogue comparators, three 16-bit timers each with two 16-bit registers, and a serial synchronous communications interface consisting of an 8-bit serial shift register with serial data input, serial data output and serial shift clock, in the form of a monolithic intergrated circuit, contained in a housing the exterior dimensions of which do not exceed 18×53 mm, with not more than 44 connections and bearing: 
ex 8542 11 71 
(cont'd)-an identification marking consisting of or including the following combination of figures and letters: 
COP 888CG 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 7137Microcontroller or microcomputer of C-MOS technology, with a processing capacity of 8 bits, consisting of a read only memory, non-programmable (ROM) with a storage capacity of 64 Kbits, a random-access memory (RAM) with a storage capacity of 2 Kbits, a full duplex universal asynchronous receiver/transmitter (UART), 2 analogue comparators, three 16-bit timers each with two 16-bit registers, and a serial synchronous communications interface consisting of an 8-bit serial shift register with serial data input, serial data output and serial shift clock, in the form of a monolithic intergrated circuit, contained in a housing the exterior dimensions of which do not exceed 18×53 mm, with not more than 44 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
COP 888EG 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 7138Microcontroller or microcomputer of C-MOS technology, with a processing capacity of 8 bits, consisting of a read only memory, non-programmable (ROM) with a storage capacity of 32 Kbits, a random-access memory (RAM) with a storage capacity of 1 Kbit, a 16-bit timer with a 16-bit register, and a serial synchronous communication interface consisting of an 8-bit serial shift register with serial data input, serial data output and serial shift clock, and in the form of a monolithic intergrated circuit, contained in a housing the exterior dimensions of which do not exceed 18×53 mm, with not more than 44 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
COP 880C 
COP 881C 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 7139Microcontroller or microcomputer of C-MOS technology, with a processing capacity of 8 bits, comprising sixteen 8-bit or eight 16-bit registers, a read only memory, non-programmable (ROM) or a programmable, read only memory (PROM), with a storage capacity of 128 Kbits, a random-access memory (RAM) with a storage capacity of 4 Kbits, 3 timers, a serial communications interface, an 8-channel analogue-to-digital converter and 9 input/output ports, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 31×31 mm, with not more than 84 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
HD 6473308CP 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 7140Microcontroller or microcomputer of C-MOS technology, with a processing capacity of 8 bits, providing communication and control functions in local operating networks (LON), comprising three 8-bit central processing units (CPUs), a static random-access memory (S-RAM) with a storage capacity of 16 Kbits and an electrically erasable, programmable, read only memory (E2PROM) with a storage capacity of 4 Kbits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 15×15 mm, with not more than 64 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
MC 143150 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 7305Microcontroller or microcomputer with a processing capacity of 16 bits, consisting of a read only memory, non-programmable (ROM) or a programmable, non-erasable, read only memory (PROM) or a UV erasable, programmable, read only memory (EPROM) with a storage capacity not exceeding 128 Kbits, a random-access memory (RAM) with a storage capacity not exceeding 6 Kbits, an analogue-to-digital converter with sample/hold, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 40×40 mm, with not more than 84 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures or figures and letters: 
8396 
8397 
8796 
83C196 
83C198 
87C196 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 7307Microcontroller or microcomputer of C-MOS technology, with a processing capacity of 16 bits, comprising a multiplier/accumulator (MAC), an arithmetic-logic shifter, a microprocessor interface port, a read only memory (ROM) with a storage capacity of 48 Kbits, a static random-access memory (S-RAM) with a storage capacity of 16 Kbits, an analogue-to-digtal converter, a digital-to-analogue converter and a programmable timer, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 40×40 mm, with not more than 144 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
21msp52BS-52 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 7413Microcontroller or microcomputer of C-MOS technology, with a processing capacity of 32 bits, having the function of audio-data processing, comprising an arithmetic-logic unit (ALU) of 32 bits, a multiplier/accumulator (MAC) of 52 bits, 2 dynamic random-access memories (D-RAMs) with a total storage capacity of 12 Kbits and 2 static random-access memories (S-RAMs) with a total storage capacity of 14 Kbits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 23×82 mm, with not more than 64 connections and bearing: 
ex 8542 11 74 
(cont'd)-an identification marking consisting of or including one of the following combinations of figures and letters: 
TMC 57000 
TMC 57001 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8001Programmable logic device of C-MOS technology, with a programmable AND array, fixed OR array, not more than 32 inputs and not more than 12 outputs, whether or not with registers, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 19×39 mm, with not more than 28 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
16 P 8 
16 RP 4 
C 16 L 8 
C 16 R 4 
C 16 R 6 
C 16 R 8 
C 20 G 10 
C 22 V 10 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8002Programmable logic device, of BiMOS technology, with programmable AND array, comprising 384, 768 or 6 400 gates, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 13×38 mm, with not more than 28 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
CY7B326 
CY7B336 
CY7B337 
CY7B338 
CY7B339 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8003Programmable logic device of C-MOS technology, non-erasable or UV-erasable, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 85×124 mm, with or wihout a quartz window on the upper surface, with not more than 299 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
16 L8-W 
16 R4-W 
16 R6-W 
16 R8-W 
22 V10-W 
CY7C330 
CY7C331 
CY7C332 
CY7C342 
CY7C343 
CY7C344 
CY7C345 
CY7C361 
EP 600 
EP 610 
EP 630 
EP 910 
EP 1800 
EP 1810 
EP 1830 
EPM 5032 
EPM 5064 
EPM 5128 
EPM 5130 
EPM 5192 
EPM 7032 
EPM 7096 
EPM 7128 
EPM 7160 
EPM 7192 
EPM 7256 
EPM 7320 
EPM 7384 
EPM 7512 
EPM 7768 
EPM 71024 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8004Non-volatile, programmable logic device of C-MOS technology, consisting of not more than 8 000 gates with not more than 140 in-/outputs, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 44×44 mm, with not more than 176 connections and bearing: 
ex 8542 11 80 
(cont'd)-an identification marking consisting of or including one of the following combinations of figures and letters: 
A 1010 
A 1020 
A 1225 
A 1240 
A 1280 
TPC 1225 
TPC 1240 
TPC 1280 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8005Logic cell array of C-MOS technology, with 16 000 or more but not more than 20 000 gates, programmable and electrically erasable, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 64×64 mm, with not more than 300 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
XC 4016 
XC 4020 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8206Bus controller of C-MOS technology, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 41×41 mm, with not more than 208 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures or figures and letters: 
82308 
82309 
82355 
82358 
82 C 88 
82 C 211 
82 C 288 
82 C 301 
CA 91C014 
GC 181 
L1A 4601 
MSM 6307 
TACT 83443 
VIC 068 
VL 82 C 331 
VY 86 C 410 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8207Control circuit of C-MOS technology, for system buses and peripheral buses and for the generation of clock signals (System Controller), in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 31×31 mm, with not more than 84 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
82C101 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8249Dynamic random-access read/write memory controller of C-MOS technology, capable of addressing memory by page (page mode operation) and simultaneous processing (interleaving) of separate memories, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 33×33 mm, with not more than 160 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
82 C 283 
GC 113 
HT 113 
VL82C320 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8251Control circuit of C-MOS technology, capable of managing battery-charge and consumption of batteries, comprising a random-access memory (RAM) with a storage capacity of 256 bits, a charge controller, a discharge controller, a battery monitor and a gas-gauge control register, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 15×33 mm, with not more than 24 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
BQ 2001 
BQ 2002 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8252Control circuit of C-MOS technology, capable of processing read-signals and of controlling the motor of a compact-disc player, comprising a central processing unit (CPU) interface, an error detection/correction circuit, a read-signal demodulator, a phase locked loop (PLL) circuit and a constant-linear-velocity (CLV) controller, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 15×21 mm, with not more than 80 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
CXD 1125 
CXD 1130 
CXD 1135 
CXD 1167 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8253Control circuit of C-MOS technology, for microcontroller or microcomputer systems with a processing capacity of 16 or 32 bits, providing programmable-memory-configuration control, programmable wait-states and programmable command-delays for memory- and bus-timing, comprising a real-time clock, a static random-access memory (S-RAM) with a storage capacity of 1 Kbit, an interrupt-controller, a direct memory access (DMA) controller, a programmable DMA-clock, and timers, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 29×29 mm, with not more than 208 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
TACT 82S411 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8254Control circuit of C-MOS technology, capable of controlling signals of a microprocessor with a processing capacity of 32 bits and access to a dynamic random-access memory (D-RAM) and a cache memory, 8-bit, 16-bit or 32-bit system-buses and providing bus-arbitration, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 31×31 mm, with not more than 160 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
82C311 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8255Asynchronous serial communication controller of C-MOS technology, having 8 independent channels capable of full duplex data-transfer at a rate of 38 400 bits per second, comprising a FIFO (first in, first out) read/write memory with a storage capacity of 192 bits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 31×31 mm, with not more than 84 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
CL-CD180 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8267Hard-disc controller, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 31×53 mm, with not more than 84 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures or figures and letters: 
1454-001 
ADS 10C00 
HDC 9224 
HDC 9234 
PD 7261 
PD 7262 
WD 1010 
WD 2010 
WD 5010 
WD 5011 
WD 42C22 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8272Control circuit of C-MOS technology, for multiplexing microprocessor data lines to a system data-bus, peripheral data-bus and memory data-bus, comprising a 16-bit data-bus, six 8-bit multiplexers, 40 buffered bus drivers and a data parity coder/decoder, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 32×32 mm, with not more than 84 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
82C104 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8276Sequence control circuit of N-MOS (including H-MOS) technology, consisting of one 32-bit register, three 16-bit registers, one 16×16-bit service memory, one 7×17-bit last-in-first-out (LIFO) memory, one adder circuit, decodifying logic, priority logic, error detection and management logic, one 16-bit multiplexer, one 8-bit counter and a timing network, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 23×82 mm, with not more than 64 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
CSS 0484 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8279Serial communication controller, with 2 independent channels capable of full duplex data-transfer at a maximum rate of 1,6 Mbits/sec or more but not exceeding 4 Mbits/sec, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 21×62 mm,with not more than 52 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
PD 72001 
SCN 68562 
Z 80 C 30 
Z 85 C 30 
Z 85 C 35 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8401Bus interface circuit of C-MOS technology, for interfacing a 8- or 16-bit address/data peripheral bus or memory bus to a 32-bit address/data-bus of a central processing unit (CPU), in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 28×28 mm, with not more than 160 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures or of figures and letters: 
82351 
GC 133 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8407Interface circuit of C-MOS technology, capable of dual-port interfacing 16-bit data between a system data-bus, a memory data-bus and a microprocessor data-bus, comprising an internal data-bus, latches, buffers, multiplexers and parity-check circuits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 34×34 mm, with not more than 164 connections and bearing: 
-an identification marking consisting of or including the following combination of figures: 
82353 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8422Enhanced programmable communications interface (EPCI), in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×39 mm, with not more than 28 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures: 
2661 
68661 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8430Bus controller and interface of C-MOS technology, comprising one or two direct memory access (DMA) controllers, one or two interrupt controllers and a timer/counter, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 33×33 mm, with not more than 160 connections and bearing: 
ex 8542 11 84 
(cont'd)-an identification marking consisting of or including one of the following combinations of figures and letters: 
82C100 
82C300 
82C836 
WD 76 C 10 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8447Interface and control circuit of C-MOS technology, comprising 2 universal asynchronous receiver/transmitters (UARTs), a parallel-data port, a hard-disc interface and a floppy-disc controller, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 15×21 mm, with not more than 100 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
82C711 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8448Interface and control circuit of C-MOS technology, programmable for interfacing signals between video-graphic-array (VGA) controllers and cathode-ray tube (CRT) displays, liquid crystal displays (LCDs), light-emitting-diode (LED) displays or plasma-displays, capable of simultaneously controlling a CRT-display and a LCD display, comprising a digital-to-analogue video-converter with random-access memory (RAMDAC), in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 15×21 mm, with not more than 100 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
CL-GD6340 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8449Repeater interface and control circuit of C-MOS technology, comprising 7 or 12 transmission/reception interface ports, an attachment-unit interface (AUI) port, a phase locked loop (PLL) decoder, a 32-bit buffer and a bus-interface for communication between repeater interface controllers (RICs), in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 45×45 mm, with not more than 160 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
DP 83950 
DP 83955 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8450Interface circuit of C-MOS technology, for interfacing data between a 32-bit bus and input/output-registers and/or interface circuits, providing direct memory access (DMA) control, comprising a FIFO (first in, first out) read/write memory with a storage capacity of 256 bits, a data-latch, an address-latch and 32-bit registers, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 37×37 mm, with not more than 132 connections and bearing: 
ex 8542 11 84 
(cont'd)-an identification marking consisting of or including the following combination of figures and letters: 
1XB9-0401 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8451Bus interface and control circuit of C-MOS technology, comprising 2 programmable interrupt-controllers, 2 timers, 3 counters, a real-time clock, a random-access memory (RAM) with a storage capacity of 912 bits, a memory-interface circuit, a floppy-disc controller interface circuit, a hard-disc controller interface circuit, a numeric-coprocessor interface and a keyboard-interface, capable of address-enable generation, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 29×29 mm, with not more than 160 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
TACT 84544 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8452Interface and control circuit of C-MOS technology, for read/write data between a digital-audio-tape storage unit and a microprocessor, comprising a buffer-manager circuit for a dynamic random-access memory (D-RAM), in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 29×29 mm, with not more than 208 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
1XK2-0301 
or 
6.1-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8611Data-buffer circuit of C-MOS technology, for data transfer and data conversion between a central processing unit (CPU) data-bus, a memory data-bus and 2 peripheral data-busses, comprising a parity-generator, a parity-error-detection circuit and 7 multiplexers, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 29×29 mm, with not more than 128 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
VL 82C332 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8628Triple 8-bit digital-to-analogue video converter with random-access memory (RAMDAC) of C-MOS technology, having 3 pixel ports each associated with a colour palette register with a storage capacity of 256×8 bits and 1 pixel port associated with 3 overlay registers each with a storage capacity of 15×8 bits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 26×26 mm, with not more than 68 connections and bearing: 
ex 8542 11 86 
(cont'd)-an identification marking consisting of or including the following combination of figures and letters: 
Bt473 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8629Dual 7-bit digital-to-analogue converter of C-MOS technology, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 12×29 mm, with not more than 28 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
PBM 3960 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8653Programmable clock-generator of BiMOS technology, capable of generating frequencies between 0,78125 MHz and 160 MHz, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 13×13 mm, with not more than 28 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
DP 8531 
DP 8532 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8660Image compression/decompression circuit of C-MOS technology, capable of real time RGB to YUV colour components conversion, comprising a video bus interface, a pixel data stream compression/decompression unit and a microprocessor bus interface, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 45×45 mm, with not more than 144 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
CL 550 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8668Modulator/demodulator of C-MOS technology (C-MOS-Modem), for full duplex data-transfer via a telephone line at a rate of 2 400 bits per second and for half duplex transfer of image telegraphy (facsimile) at a rate of 4 800 or 9 600 bits per second, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 14×37 mm, with not more than 28 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
SC 11046 
SC 11054 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8677Dual universal asynchronous receiver/transmitter (DUART), in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 18×53 mm, with not more than 100 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures or figures and letters: 
2681 
PC 87310 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8680Comparator circuit of C-MOS technology, capable of comparing cache-address tags, comprising a static random-access memory (S-RAM) with a storage capacity of 16 Kbits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 8×33 mm, with not more than 24 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
MCM 62350 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8681Digital filter of C-MOS technology, capable of quadruple or octuple over-sampling for 2 channels, comprising a read only memory, non-programmable (ROM) and a random-access memory (RAM), in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 14×36 mm, with not more than 40 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
TMS 57021 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8685Transmitter/receiver of C-MOS technology, operating with a supply current not exceeding 3 mA, comprising 2 driver circuits, 3 receiver circuits and a thermal protection circuit, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 9×12 mm, with not more than 18 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
LTC 902 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 95374-channel monolithic integrated circuit of bipolar technology for controlling read/write signals of magnetic heads in hard-disc units, contained in a housing the exterior dimensions of which do not exceed 12×19 mm, with not more than 28 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
SSI 510 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 95386- or 14-channel controller of bipolar technology, for controlling read/write signals from magnetic heads in hard-disc units, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 19×19 mm, with not more than 44 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters : 
SSI 32R5121/5121R 
SSI 32R522-6 
SSI 32R522R-6 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 9804Monolithic integrated circuit (read/write data processor circuit) for the amplification and conversion of read signals and conversion of write signals for hard-disc drives, contained in a housing the exterior dimensions of which do not exceed 19×38 mm, with not more than 28 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of letters and figures: 
SSI 540 
SSI 541 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 19 3030Dual or quadruple amplifier operating with a supply current per amplifier not exceeding 30 mA, in the form of a monolithic integrated analogue circuit, contained in a housing the exterior dimensions of which do not exceed 8×11 mm, with not more than 16 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
LT 1178 
LT 1179 
or 
-other identification markings relating to devices complying with the abovementioned description 0ex 8542 19 5020Voltage regulator with an input voltage range of 3 V or more but not exceeding 60 V and a quiescent current of 6 mA, comprising an internal 1,25 A, 2,5 A or 5 A switch circuit, in the form of a monolithic integrated analogue circuit, contained in a housing the exterior dimensions of which do not exceed 11×39 mm, with not more than 8 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
LT 1070 
LT 1071 
LT 1170 
LT 1171 
LT 1172 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 19 5030Adjustable shunt voltage regulator, comprising an internal voltage reference and divider resistors with a collector (sink) current of 1 mA or more but not exceeding 100 mA and an initial voltage reference tolerance of 0,4 %, in the form of a monolithic integrated analogue circuit, contained in a housing the exterior dimensions of which do not exceed 8×11 mm, with not more than 8 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
LT 1431 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 19 5040Variable voltage regulator with a supply current not exceeding 120 mA at an output current not exceeding 100 mA and a dropout voltage not exceeding 0,85 V at an output current of 125 mA, in the form of a monolithic integrated analogue circuit, contained in a housing the exterior dimensions of which do not exceed 8×20 mm, with not more than 16 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
LT 1020 
LT 1120 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 19 6008Current-control circuit of bipolar technology, capable of driving a continuous output current of 2 A, having an output-error detection function, in the form of a monolithic integrated analogue circuit, contained in a housing the exterior dimensions of which do not exceed 11×16 mm, with not more than 5 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
PBD 3548 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 19 6009Control circuit of BiMOS technology, capable of driving loads from the positive side of a power supply, providing a voltage-transient protection of -100 V or more but not exceeding +100 V, having an output leak-current not exceeding 150 mA, in the form of a monolithic integrated analogue circuit, contained in a housing the exterior dimensions of which do not exceed 8×11 mm, with not more than 16 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
MC 3399DW 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 19 6010Circuit for driving current in a winding of linear motors or motors with rotating arms, of bipolar technology, working with an output voltage not exceeding 45 V at an output current not exceeding 1,8 A, in form of a monolithic integrated analogue circuit, contained in a housing the exterior dimensions of which do not exceed 17×23 mm, with not more than 28 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
PBL 3717 
PBL 3770 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 19 6011Circuit for driving linear motors or motors with rotating arms, of bipolar technology, working with an output voltage not exceeding 45 V at an output current not exceeding 1 A, comprising a clockgenerator, in the form of a monolithic integrated analogue circuit, contained in a housing the exterior dimensions of which do not exceed 17×23 mm, with not more than 28 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
PBL 3771 
PBL 3772 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 19 7030Interface circuit of bipolar technology, for interfacing data and power between a microcontroller or microcomputer and a read/write terminal, comprising a bridge rectifier, a power supply regulator, a reset circuit, a transmitter and a receiver, in the form of a monolithic integrated analogue circuit, contained in a housing the exterior dimensions of which do not exceed 8×11 mm, with not more than 16 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
LB 1167A 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 19 8020Interline charge-coupled image sensor with 250 000 or more but not more than 450 000 photosensitive areas, in the form of a monolithic integrated analogue circuit, contained in a housing the exterior dimensions of which do not exceed 21×32 mm, with not more than 20 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
ICX 018 
ICX 021 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 19 8025Half-bridgerectifier, consisting of 2 field effect transistors of MOS technology (MOSFETs), capable of driving inductive or capacitive loads with a nominal voltage of 50 V and a nominal current of 2 A, in the form of a monolithic integrated analogue circuit, contained in a housing the exterior dimensions of which do not exceed 6×11 mm, with not more than 16 connections and bearing: 
ex 8542 19 80 
(cont'd)-an identification marking consisting of or including the following combination of figures and letters: 
Si9950DY 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 19 8026Voltage converter and regulator of bipolar technology, with a voltage loss not exceeding 1,6 V at an output current of 100 mA, operating with a supply voltage range of 3,5 V or more but not exceeding 15 V, in the form of a monolithic integrated analogue circuit, contained in a housing the exterior dimensions of which do not exceed 8×11 mm, with not more than 16 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
LT 1054 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 19 80275-channel voltage comparator for monitoring lamp-circuits, in the form of a monolithic integrated analogue circuit, contained in a housing the exterior dimensions of which do not exceed 10×28 mm, with not more than 20 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
AD 22001 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 19 8028Image sensor consisting of 16 rows of not more than 992 photosensitive areas and a matrix linked to a shift register, in the form of a monolithic integrated analogue circuit, contained in a housing the exterior dimensions of which do not exceed 12×28 mm, with not more than 22 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
RA 16×62 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 19 8032Speech-transfer circuit of bipolar technology, operating at a supply voltage of 2,3 V or more but not exceeding 22 V, providing continuously regulation of transmit and receive gain and a mute function, comprising 4 amplifiers, an internal voltage reference, 2 DC regulators and a power down function, in the form of a monolithic integrated analogue circuit, contained in a housing the exterior dimensions of which do not exceed 8×13 mm, with not more than 20 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
PBL 3850 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 19 8033Voice-switched speakerphone circuit of bipolar technology, capable of half-duplex transmission and reception of speech, comprising 1 loud-speaker amplifier with an operating voltage of 2,5 V or more but not exceeding 12 V, a tone ringer circuit, detectors and comparators for automatic switch-over in transmit or receive mode, in the form of a monolithic integrated analogue circuit, contained in a housing the exterior dimensions of which do not exceed 12×29 mm, with not more than 28 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
PBL 3786 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 19 8034Passive decoder of BiMOS technology, comprising a fixed matrix, a 7-kHz filter, a noise-reducing circuit, a digital delay circuit and a memory-control circuit, in the form of a monolithic integrated analogue circuit, contained in a housing the exterior dimensions of which do not exceed 17×58 mm, with not more than 64 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
LV 1000 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 19 8035Matrix decoder of BiMOS technology, comprising an adaptive matrix circuit, automatic-balance buffers, a noise generator and a control circuit, in the form of a monolithic integrated analogue circuit, contained in a housing the exterior dimensions of which do not exceed 15×63 mm, with not more than 48 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
SSM 2125 
SSM 2126 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 19 8036Voice-switched speakerphone circuit of bipolar technology, capable of half duplex transmission and reception of speech, comprising attenuators, level-detectors, a dial-tone detector, an algorithm-control circuit and amplifiers, in the form of a monolithic integrated analogue circuit, contained in a housing the exterior dimensions of which do not exceed 8×19 mm, with not more than 28 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
MC 34118 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 19 8037Serial 13-bit linear encoder/decoder of C-MOS technology, providing digital-to-analogue and analogue-to-digital conversion, comprising 2 sample and hold cicuits, an comparator/ amplifier, a data-selector circuit, a successive approximation register, 2 shift registers, a sequence controller and a voltage reference circuit, in the form of a monolithic integrated analogue circuit, contained in a housing the exterior dimensions of which do not exceed 8×20 mm, with not more than 16 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
MC 145402 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 19 8038Encoder/decoder with pulse-code-modulation filter of C-MOS technology, operating with a +5 V single-power supply, comprising an analogue-to-digital converter and a digital-to-analogue converter, in the form of a monolithic integrated analogue circuit, contained in a housing the exterior dimensions of which do not exceed 8×13 mm, with not more than 20 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
MC 145480 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 19 8039Encoder/decoder with pulse code-modulation filter of C-MOS technology, with a dual-power supply and having a typical dissipation rate of 50 mW, comprising an analogue-to-digital converter and a digital-to-analogue converter, in the form of a monolithic integrated analogue circuit, contained in a housing the exterior dimensions of which do not exceed 8×11 mm, with not more than 16 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
MC 145503 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 19 8040Adaptive differentiated pulse-code-modulation circuit of C-MOS technology, for encoding/decoding data, capable of full duplex data-transmission between a channel with a transfer rate of 64 Kbits per second and a channel with a transfer rate of 16 Kbits, 24 Kbits, 32 Kbits or 64 Kbits per second, in the form of a monolithic integrated analogue circuit, contained in a housing the exterior dimensions of which do not exceed 8×20 mm, with not more than 16 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
MC 145532 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 19 8041Voltage reference circuit providing an output voltage of 5, 7 or 10 V with a drift slope (output voltage temperature co-efficient) not exceeding 20 ppm/°C and an output voltage noise not exceeding 6 mVrms, in the form of a monolithic integrated analogue circuit, contained in a housing the exterior dimensions of which do not exceed 8×11 mm, with not more than 8 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
LT 1021 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 19 8042Voltage reference circuit with a reverse breakdown of 1,235 V (±4 mV) or 2,5 V (±20 mV), in the form of a monolithic integrated analogue circuit, contained in a housing the exterior dimensions of which does not exceed 5×6 mm or the diameter of which does not exceed 6 mm, with not more than 3 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
LT 1004 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 19 8043Bidirectional switch circuit of C-MOS technology, capable of switching analogue signals of -5 V and of +5 V, comprising 4 field-effect transistors (FETs), in the form of a monolithic integrated analogue circuit, contained in a housing the exterior dimensions of which do not exceed 9×11 mm, with not more than 18 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
SD 5401 CY 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 20 5040Amplifier with an input power of 1 mW and an output power of 3,5 W at a frequency range of 890 MHz or more but not exceeding 915 MHz, in the form of a hybrid integrated circuit, contained in a housing the exterior dimensions of which do not exceed 5×15×34 mm, with not more than 6 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
XHW 903 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8543 80 8092Modulators for the range from 0,5 MHz to 5 MHz, contained in a housing the external dimensions of which do not exceed 48×74 mm0ex 8543 80 8093Opto-electronic circuit consisting of one or more light-emitting diodes (LEDs) and one photodiode with amplifier circuit and an integrated logic gate arrays circuit or one or more light-emitting diodes (LEDs) and of several photodiodes with amplifier circuit, contained in a plastic housing with not more than 8 connections and bearing: 
ex 8543 80 80 
(cont'd)-an identification marking consisting of or including one of the following combinations of figures and letters: 
HC PL 2 400 
HC PL 2730 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8548 00 0091Clock/calendar circuit, consisting of a lithium battery, a quartz oscillator and a monolithic integrated circuit of C-MOS technology comprising a programmable generator for periodic interruptions and square waves and a static random-access memory (S-RAM), the whole contained in a housing the exterior dimensions of which do not exceed 18×34 mm, with not more than 24 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
DS 1287 
DS 1387 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8548 00 0092Contact image sensor, comprising a row of 1 728 or more but not more than 2 048 photosensitive dots and a row of light-emitting diodes (LEDs), contained in a housing the exterior dimensions of which do not exceed 21×22×273 mm 0ex 9021 30 9021Vascular protheses, neither woven nor knitted, of which the largest opening has an internal diameter not exceeding 6 mm3,1ex 9021 30 9029Vascular prothese, neither woven nor knitted, of which the largest opening has an internal diameter of more than 6 mm but not exceeding 8 mm0(a) Control of the use for this special purpose shall be carried out pursuant to the relevant Community provisions. 
TABLE II ex 8471 93 6020Magnetic tape storage unit for single-reel cartridges0ex 8471 99 9010Optical reader for reading alphanumerical dot-matrix printing characters and converting them into electrical signals, comprising a read head containing an optical detector, an amplifier, a focusing lens and two lamps, linked by one or two flat cables to a central module the dimensions of which do not exceed 200×220 mm, comprising a printed circuit board on which are mounted a microprocessor, an image recognition circuit and an analogue-to-digital converter0ex 8473 30 1020Processor of ECL technology, consisting of not more than 336 monolithic integrated circuits, comprising 4 200 uncommitted logic arrays and random-access memories (RAMs) with a total storage capacity of 16 Kbits, contained in a housing, mounted on both sides of a multiple printed circuit enclosed between two cooling plates the overall exterior dimensions of which do not exceed 148×560×594 mm and bearing: 
- an identification marking consisting of or including the following combination of figures and letters: 
001B-3035-H002 
or 
- other identification markings relating to devices complying with the abovementioned description0ex 8473 30 1030Component forming the arithmetic/logic element of a central processing unit (CPU), comprising not more than 9 printed circuit boards, the dimensions of which do not exceed 290×310 mm, on each of which are mounted not more than 121 ECL gate arrays or ECL random access memories (ECL-RAMs) and combinations thereof, contained in a framework the dimensions of which do not exceed 501×596×611 mm which serves as a housing and interconnector for the printed circuit boards, and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
CO1B 2675 E 500 
CO1B 2675 H 500 
CO1B 2675 H 501 
CO1B 2675 H 502 
CO1B 2675 H 503 
CO1B 2675 H 504 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8473 30 9020Ferrite magnetic heads of Winchester technology, for hard disc file-peripherals as well as carrying arms equipped with such magnetic heads, capable of recording to a density of 10 tracks or more per mm0ex 8473 30 9030Read/write assembly for hard disc storage units, comprising ferrite magnetic heads of Winchester technology, mounted on a carrier arm, connected via a flexible printed circuit to a metal bracket upon which are mounted: 
-a flexible printed circuit upon which is mounted an amplifier for read/write signals, in the form of an integrated circuit, 
-a printed circuit socket0ex 8473 30 9040Inkjet printhead0ex 8473 30 9050Magnetic bubble memories with a storage capacity of not more than 4 Mbits, contained in a housing the exterior dimensions of which do not exceed 43×44 mm, with not more than 56 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures or figures and letters: 
7110 
7114-1 
FBM 54 DB 
FBM 64 DA 
BDL 0133 
BDL 0134 
BDN 0151 
BDN 515 
MBM 2011 
MBM 2256 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8473 30 9070Drive-unit for digital audio tape storage units0ex 8473 40 9010Thermal printer heads of thick or thin film technology, consisting of a printed circuit with at least one tantalum capacitor and an electrolytic capacitor contained in a metal support with connector, printer element and heat sink, supplied with the appropriate support and transport roll0ex 8483 10 9010Integrally forged and roughly shaped generator and turbine shafts of a weight exceeding 215 t0ex 8504 40 9810Direct current to direct current converter, with diodes not in cascade connection, with an input voltage range not exceeding 72 V, contained in a housing with not more than 16 connections0ex 8506 19 1910Lithium iodine single cell battery the dimensions of which do not exceed 9×23×45 mm and a voltage not exceeding 2,8 V0ex 8506 19 1920Unit consisting of not more than 2 lithium batteries embedded in a socket for integrated circuits (battery-buffered socket), with not more than 32 connections and incorporating a control circuit0ex 8506 19 9910Dry zinc/carbon batteries of a voltage of 5,5 V or more but not exceeding 6,5 V and the dimensions of which do not exceed 5×90×110 mm, for incorporation in film cassettes for instant pictures (a)0ex 8517 90 8110Assembly for telephonic apparatus consisting of a microphone, protecting circuit and four-way connecting socket, mounted on a printed circuit the dimensions of which do not exceed 22×40 mm0ex 8518 90 0091Integrally cold-upsetted steel coreplate, in the form of a disc on one side provided with a cylinder, for use in the manufacture of loudspeakers (a)0ex 8522 90 9191Optical unit consisting of a laser diode with one photodiode, emitting light of a nominal wavelength of 780 nm, contained in a housing with a diameter of not more than 10 mm and a height of not more than 9 mm, with not more than 10 connections and bearing: 
-an identification marking consisting of or including one of the following combination of letters or of figures and letters: 
LDGU 
LT 022 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8522 90 9993Cassette-deck sub-assembly for sound recording and reproducing apparatus, for use in the manufacture of telephone answering machines (a)0ex 8523 20 1040Rigid magnetic discs, prelubricated, oxide type, with a coercivity of 300 Oe or more0ex 8523 20 1050Rigid magnetic disc with a thin-film metallic coating, having a coercivity exceeding 600 Oersted and an external diameter not exceeding 231 mm0ex 8529 10 7010Ceramic filter package comprising 2 ceramic filters and 1 ceramic resonator for a frequency of 10,7 MHz (±30 kHz), contained in a housing the exterior dimensions of which do not exceed 10×10 mm0ex 8529 10 7020Ceramic filters for frequencies of 4,5 MHz or more but not exceeding 6,6 MHz contained in a housing the dimensions of which do not exceed 9×24 mm0ex 8531 20 9045Digital displays, consisting of a printed circuit board of a size not exceeding 35×90 mm with a single line of characters, not less than 3 in number, comprising light-emitting diodes (LEDs) made from gallium-based semiconductor compounds mounted thereon. Each character is composed of up to 8 segments with or without a decimal point and the line of characters has a protective cover of plastic0ex 8531 80 9010Direct current plasma display0ex 8534 00 11 
ex 8534 00 1991 
91 
Single-face printed circuit the dimensions of which do not exceed 30×30 mm, for the manufacture of products falling within Chapter 91 (a)0ex 8534 00 1192Multiple printed circuit, consisting of 24 layers, including 5 layers with buried vias of bismaleimide triazine, the exterior dimensions of which do not exceed 64×65 cm0ex 8534 00 1992Single-face printed circuits, each with not more than 268 conductive leads, on a plastic tape with sprocket holes on both edges and having a width of not more than 35 mm and a thickness of not more than 0,26 mm0ex 8534 00 1993Printed circuit on one or both sides of a ceramic substrate, consisting of conductor elements and contacts, the dimensions of which do not exceed 36×36 mm, with not more than 304 connections0ex 8534 00 9092Printed circuit on one or both sides of a ceramic substrate, consisting of conductor elements, contacts and resistors, incorporating connections isolated in vitrified layers, the dimensions of which do not exceed 37×37 mm, with not more than 320 connections0ex 8536 41 10 
ex 8536 41 90 
ex 8536 49 0091 
91 
91 
Thermal relays contained in a hermetically sealed glass cartridge not exceeding 35 mm in length excluding wires, with a maximum leakage rate of 10-6 cm3 He/sec at one bar in the temperature range 0 to 160 °C, to be incorporated into compressors for refrigerating equipment (a)0ex 8538 90 9091Part of an electrothermal fuse, consisting of a tin coated copper wire attached to a cylindrical casing, the exterior dimensions of which do not exceed 5×48 mm0ex 8540 11 1093Colour cathode-ray tube with a slot mask, equipped with electron guns placed side by side (in-line technology) and with a diagonal measurement of the screen of 12 cm or more but not exceeding 26 cm0ex 8540 12 1091Flat screen monochrome cathode-ray tube with a diagonal measurement of the screen of 150 mm or more but not exceeding 155 mm and an anode voltage of 25 kV or more but not exceeding 32 kV 0ex 8540 20 9091Photomultiplier consisting of a photocathode tube with 9 dynodes, for light of wavelength of 160 nm or more but not exceeding 930 nm, of a diameter not exceeding 14 mm and a height not exceeding 94 mm0ex 8540 30 1025Colour cathode-ray tube with a dot mask, equipped with electron guns in a triangular fashion (delta technology), with a diagonal measurement of the screen of 66 cm or more0ex 8540 89 1191Displays in the form of a tube consisting of a glass housing mounted on a board the dimensions of which do not exceed 300×350 mm excluding leads. The tube contains one or more rows of characters or lines arranged in rows, each character or line consisting of fluorescent or phosphorescent elements. These elements are mounted on a metallized base which is covered with fluorescent substances or phosphorescent salts which give off light when bombarded with electrons0ex 8540 91 0093Electron gun for the production of monochrome cathode-ray tubes with a diagonal measurement of the screen of 7,6 cm or more but not exceeding 30,5 cm (a)0ex 8541 10 9110Silicon power rectifier diodes of planar technology, with a recovery time of less than 100 ns, a maximum recurring reverse voltage of 200 V, and average forward current of 2,5 A or more, contained in a flat housing the exterior dimensions of which exceed 3×9×9 mm but do not exceed 5×11×17 mm0ex 8541 10 9910Germanium-gold diodes with forward voltage not exceeding 1 V at 5 mA0ex 8541 10 9920Silicium diode with a variable capacitance, capable of a capacitance change of more than 10 times in relation to its starting value by variation of the operating voltage of 2 V or more but not exceeding 10 V and with a capacitance of 96 pF or more but not exceeding 144 pF at 2 V, contained in a cylindrical housing having a diameter of not more than 3 mm and a height of not more than 8 mm, with not more than 2 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
MV 1404 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8541 21 9010High electron mobility transistor (HEMT), for frequencies of 2 GHz or more but not exceeding 20 GHz, with a dissipation rate not exceeding 180 mW, contained in a housing with a diameter not exceeding 3 mm, with not more than 4 connections0ex 8541 21 9020Field-effect transistor (FET) for frequencies of 2 GHz or more but not exceeding 16 GHz, with a dissipation rate not exceeding 225 mW, contained in a housing with a diameter not exceeding 3 mm, with not more than 4 connections0ex 8541 29 9010Transistor with a power of 150 W or more at a voltage of 160 V or more and with a cut-off frequency of 20 MHz or more, contained in a housing the exterior dimensions of which do not exceed 22×37 mm, with not more than 3 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
SA 1170 
2 SA 1215 
2 SA 1494 
2 SC 2774 
2 SC 2921 
2 SC 3858 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8541 40 1060Light-emitting diode (LED), made from gallium-arsenic-phosphor (GaAsP) semiconductor, operating at a nominal wavelength of 710 nanometers, in the form of a monolithic integrated circuit without a housing (chips), for the manufacture of optocouplers (a)0ex 8541 40 9191Module consisting of not more than five solar cells of thin-film technology, on a substrate the exterior dimensions of which do not exceed 18×70 mm0ex 8541 60 0091Quartz crystal oscillating at a frequency of 32 768 Hz, contained in a cylindrical housing of a length not exceeding 8,2 mm and a diameter not exceeding 3,2 mm, for the manufacture of products falling within Chapter 91 (a)0ex 8541 60 0092Polarized ceramic piezo-electric crystal oscillating in a frequency range of 500 kHz or more but not exceeding 12 500 kHz, contained in a housing the exterior dimensions of which do not exceed 14×15 mm, with not more than 3 connections0ex 8542 11 0510Control and driver circuit for dot-matrix liquid crystal displays (LCDs) of C-MOS technology, with a character generator, and having a drive voltage of more than 10 V, in the form of a monolithic integrated circuit without a housing (microchip), for the manufacture of liquid crystal display (LCD) modules (a)0ex 8542 11 1201Dynamic random-access memory of N-MOS (including H-MOS) technology (N/H-MOS D-RAM) with a storage capacity of 64 Kbit, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 9×24 mm, with not more than 18 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
KM 4164 
MN 4264 
TMS 4164 
TMS 4416 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 1211Dynamic random-access memory of N-MOS (including H-MOS) technology (N/H-MOS D-RAM), with a storage capacity of 256 Kbits and an access time not exceeding 150 ns, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×34 mm, with not more than 24 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
HB 50562 
HM 50256 
HM 50464 
KM 41256 
KM 41257 
M5M 4256 
M5M 4464 
MB 81256 
MB 81464 
MSM 4256 
MSM 4464 
PD 41254 
PD 41256 
PD 41464 
TMM 41256 
TMM 41464 
TMS 4256 
TMS 4464 
or 
-other identification markings relating to devices complying with the abovementioned description8ex 8542 11 1212Dynamic random-access memory of C-MOS technology (C-MOS D-RAM), with a storage capacity of 256 Kbits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×39 mm, with not more than 28 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
53 C 256 
53 C 258 
53 C 464 
53 C 466 
MB 81 C 258 
MB 81 C 466 
P 51 C 256 
P 51 C 259 
TC 51832 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 1213Dual port dynamic random-access memory (D-RAM), with data registers and a serial read output control, with a storage capacity of 256 Kbits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 13×39 mm, with not more than 24 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
M5M 4 C 264 
MB 81461 
PD 41264 
TMS 4461 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 1401Random-access memory with a storage capacity of 1 Mbit, with separate in- and outputs and serial shift registers (so-called field memories), of C-MOS technology (C-MOS RAM), in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×54 mm, with not more than 40 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
TC 521000 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 1601Pseudo-static random-access memory of C-MOS technology (C-MOS PS-RAM), with a storage capacity of 4 Mbits and an access time of 100 ns, comprising a timing pulse generator and a refresh control circuit, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 12×22 mm, with not more than 32 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
HM 658512 
or 
-other identification markings relating to devices complying with the abovementioned description 
These devices are for the manufacture of portable computers, capable of operating without an external source of power (a)0ex 8542 11 2117Static random-access memory of C-MOS technology (C-MOS S-RAM), with a storage capacity of 256×4 bits and an access time not exceeding 60 ns, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 12×33 mm, with not more than 24 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
CY7C122 
CY7C123 
CY93422 
CY93L422 
P4C 422 
or 
- other identification markings relating to devices complying with the abovementioned description0ex 8542 11 2128Static random-access memory (S-RAM), with a storage capacity of 1 K×4 bits and an access time not exceeding 25 ns, in the form of a monolithic integrated circuit contained in a housing the exterior dimensions of which do not exceed 8×32 mm, with not less than 24 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
AM 9150-20 
AM 9150-25 
CY 7 C 150-15 
CY 7 C 150-25 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 2132Static random-access memory of N-MOS (including H-MOS) technology (N/H-MOS S-RAM), with a storage capacity of 8 Kbits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×39 mm, with not more than 24 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures or figures and letters: 
4008 
4118 
4801 
8104 
8108 
8112 
8114 
8185 
PD 421 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 2142Static random-access memory of C-MOS technology (C-MOS S-RAM), with a storage capacity of 32 Kbits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 18×63 mm, with not more than 48 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
IDT 7134 
TC 5532 
or 
- other identification markings relating to devices complying with the abovementioned description0ex 8542 11 2143Dual port static random-access memory of BiMOS technology (BiMOS dual port S-RAM), with a storage capacity of 32 Kbits and an access time not exceeding 35 ns, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 29×62 mm, with not more than 68 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
CY7B134 
CY7B1342 
CY7B135 
CY7B138 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 2148Static random-access cache memory of C-MOS technology (C-MOS S-Cache-RAM), with a storage capacity of 4 K×16 bits and an access time not exceeding 55 ns, comprising a 12-bits address latch and control circuits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 10×53 mm, with not more than 44 connections and bearing: 
ex 8542 11 21 
(cont'd)-an identification marking consisting of or including the following combination of figures and letters: 
IDT71586S 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 2149Dual port static random-access memory of BiMOS technology (BiMOS dual port S-RAM), with a storage capacity of 64 Kbits and an access time not exceeding 35 ns, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 29×29 mm, with not more than 68 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
CY7B144 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 2301Static random-access cache memory of BiMOS technology (BiMOS S-Cache-RAM), with a storage capacity of 72 Kbits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 29×29 mm, with not more than 68 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
CY7B180 
CY7B181 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 2319Static random-access cache memory of C-MOS technology (C-MOS S-Cache-RAM), with a storage capacity of 144 Kbits and an access time not exceeding 30 ns, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 21×21 mm, with not more than 52 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
TC 55187 
TC 55188 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 2322Static asynchronous random-access memory of C-MOS technology (C-MOS asynchronous S-RAM), with a storage capacity of 16 K×16 bits, excluding static random-access cache memory (S-Cache-RAM), in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 21×21 mm, with not more than 52 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
MCM 62995-17 
MCM 62995-20 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 2324Static random-access memory of BiMOS technology (BiMOS S-RAM), with a storage capacity of 256 Kbits and an access time not exceeding 20 ns, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 21×38 mm, with not more than 52 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
CY7B153 
CY7B154 
CY7B155 
CY7B156 
HM 6709 A 
MCM 6708 
MCM 709 
TC 55B328 
TC 55B464 
TC 55B465 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 2509Static random-access cache memory of BiMOS technology (BiMOS S-Cache-RAM), with a storage capacity of 288 Kbits and an access time not exceeding 21 ns, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×17 mm, with not more than 44 connections and bearing: 
-an identification marking consisting of or including one of the following combination of figures and letters: 
CY7B173 
CY7B174 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 3101Read only memory, non-programmable in C-MOS technology (C-MOS ROM), with a storage capacity of 256 Kbits, in the form of a monolithic integrated circuit contained in a housing the exterior dimensions of which do not exceed 17×50 mm, with not more than 54 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
HN 61256 
HN 613256 
MB 83256 
TMS 60C18 
TMS 60C19 
TMS 60C20 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 4201UV erasable, programmable, read only memory (EPROM), with a storage capacity of 16 Kbits and an access time not exceeding 65 ns, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×39 mm, with a quartz window on the upper surface and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
CY 7C 245 W 
CY 7C 291 W 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 4206UV-erasable, programmable, read only memory (EPROM), with a storage capacity of 32 Kbits and an access time not exceeding 45 ns, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×39 mm, with a quartz window on the upper surface and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
27 CX 321 
27 CX 322 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 4211UV erasable, programmable, read only memory (EPROM), with a storage capacity of 64 Kbits and an access time not exceeding 65 ns, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×39 mm, with a quartz window on the upper surface and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
CY 7C 261 W 
CY 7C 263 W 
CY 7C 268 W 
CY 7C 269 W 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 42 
ex 8542 11 5916 
58 
UV erasable or non-erasable, programmable, read only memory (EPROM or PROM), with a storage capacity of 128 Kbits and an access time not exceeding 100 ns, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×39 mm, with not more than 32 connections, with or without a quartz window on the upper surface and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
CY 7C 251 
CY 7C 254 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 44 
ex 8542 11 5901 
64 
UV erasable or non-erasable, programmable, read only memory (EPROM or PROM) with a storage capacity of 1 Mbit and an access time not exceeding 35 ns, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 18×53 mm, with not more than 40 connections, with or without a quartz window on the upper surface and bearing : 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
CY7B201 
CY7B210 
CY7B211 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 5016Electrically erasable, programmable, read only memory (E2PROM), with a storage capacity of 256 Kbits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 19×42 mm, with not more than 32 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures or of figures and letters: 
28256 
28 C 256 
48 C 256 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 5026Electrically erasable, programmable, read only memory (E2PROM), with a storage capacity of 1 Mbit, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×52 mm, with not more than 44 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
AT 28C1024 
E/M 28C010 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 5902Double row buffer memory, with shift registers and random access memories (RAMs), in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×39 mm, with not more than 28 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
CRT 9212 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 5903Write buffer memory of C-MOS technology, with an organization of 4×16 bits comprising eight bits of address and eight bits of data, and four-bit parity, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 31×31 mm, with not more than 68 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
79 R 2020 A 
79 R 3020 
R 2020/16 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 5921FIFO (first in, first out), read/write memory of C-MOS technology, with a storage capacity of 64×8 bits or 64×9 bits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 12×38 mm, with not more than 28 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
CY7C408A 
CY7C409A 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 5924FIFO (first in, first out) read/write memory, with a storage capacity of 7 280 or 9 080 bits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 12×36 mm, with not more than 28 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
PD 41101 
PD 41102 
PD 42101 
PD 42102 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 5931FIFO (first in, first out) read/write memory of C-MOS technology, with a storage capacity of 72 Kbits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 14×38 mm, with not more than 32 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
CY7C460 
CY7C470 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 5933FIFO (first in, first out) read/write memory of C-MOS technology, with a storage capacity of 144 Kbits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 14×38 mm, with not more than 32 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
CY7C462 
CY7C472 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 5935FIFO (first in, first out) read/write memory of C-MOS technology, with a storage capacity of 288 Kbits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 14×38 mm, with not more than 32 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
CY7C464 
CY7C474 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 5948Programmable, non-erasable, read only memory (PROM), with a storage capacity of 16 Kbits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×39 mm, with not more than 32 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
7 C 245 
7 C 291 
7 C 292 
HM 6616 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 5952Programmable, non-erasable, read only memory (PROM) of C-MOS technology with a storage capacity of 36 288 bits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 16×16 mm, with not more than 20 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
XC 1736 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 5954Programmable, non-erasable, read only memory (PROM), with a storage capacity of 64 Kbits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×44 mm, with not more than 32 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
CY7C261 
CY7C263 
CY7C264 
CY7C268 
CY7C269 
MB7143 
MB7144 
MB71C44 
XC 1764 
XC 1765 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 62 
ex 8542 11 64 
ex 8542 11 67 
ex 8542 11 6803 
03 
03 
01 
Floating-point arithmetic co-processor, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 46×53 mm, with not more than 208 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures or figures and letters: 
3171 
74 ACT 8847 
79 R 2010 
79 R 3010 
80287 
80387 
8087 
80C287 
CY 7C 602 
MC 68881 
MC 68882 
NCR 32020 
NS 32081 
NS 32381 
R 2010/16 
TX 32081 W 
WTL 3167 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 6221Microprocessor of N-MOS (including H-MOS) technology, with a processing capacity of 8 bits, for the encoding/decoding of data, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 15×53 mm, with not more than 40 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures or figures and letters: 
8294 
Z 8068 
Z 9518 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 6222Microprocessor of C-MOS technology, with a processing capacity of 8 bit, consisting of a central processing unit (CPU), a memory management unit, a two-channel DMA controller, two-channel programmable 16-bit counter/timer, a wait-state generator, a two-channel asynchronous serial communication interface (ASCI) and a bus controller, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 26×62 mm, with not more than 80 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
HD 64 A 180 
HD 64 B 180 
Z 64180 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 6223Microprocessor of C-MOS technology, with a processing capacity of 8 bits, consisting of a modulation circuit for recording signals, a demodulation circuit for reproducing signals, an error-correction code circuit (ECC), an analogue-to-digital/digital-to-analogue converter, a static random-access memory (S-RAM) interface, an input/output circuit for interfacing a microcontroller or microcomputer, an input/output circuit for interfacing an audio system and a phase locked loop circuit, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 15×21 mm, with not more than 100 coonections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
CXD2601 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 62 
ex 8542 11 6441 
31 
Multiprotocol microprocessor of C-MOS technology, with a processing capacity of 8 or 16 bits, consisting of a central processing unit (CPU), a direct memory access controller, an interrupt controller, a dual port random-access memory (Dual Port RAM) with a storage capacity of 9 216 bits, three timers, a communication processor and three full duplex serial communication controllers, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 36×36 mm, with not more than 132 connections and bearing : 
-an identification marking consisting of or including the following combination of figures and letters: 
MC 68302 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 6421Microprocessor of N-MOS (including H-MOS) technology, with a processing capacity of 16 bits and an 8-bit address/data-bus, consisting of a central processing unit (CPU), a timing generator, two independent direct memory access (DMA) channels, a programmable interrupt controller, 3 programmable 16-bit timers, programmable memory and external chip selection logic, a programmable wait state generator and a bus controller, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 30×30 mm, with not more than 68 connections and bearing: 
-an identification marking consisting of or including the following combination of figures: 
80188 
or 
-other identification markings relating to devices complying with the abovementioned description7ex 8542 11 6422Microprocessor of C-MOS technology, with a processing capacity of 16 bits and an 8-bit data-bus, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 36×60 mm, with not more than 120 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters : 
MB 89T713 
MB 89T715 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 6423Microprocessor of C-MOS technology, with a processing capacity of 10 bits, for text data decoding, comprising a prefix processor for serial to parallel data conversion, a video display processor, a memory access controller, a display memory and an interface circuit, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 16×37 mm, with not more than 28 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
CF 70064 
CF 70095 
CF 72301 
CF 72305A 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 6434Microprocessor in N-MOS (including H-MOS) technology, with a processing capacity of 16 bits, consisting of a central processing unit (CPU), a timing generator, two independent direct memory access (DMA) channels, a programmable interrupt controller, three programmable 16-bit timers, programmable memory and external chip selection logic, a programmable wait state generator and a bus control unit, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 30×30 mm, with not more than 68 connections and bearing: 
-an identification marking consisting of or including the following combination of figures: 
80186 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 6435Microprocessor of N-MOS technology (including H-MOS), with a processing capacity of 16 bits, consisting of a central processing unit (CPU), a memory management unit (MMU) and a real address and virtual address operating mode system (OSO), in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 30×30 mm, with not more than 68 connections and bearing: 
-an identification marking consisting of or including the following combination of figures: 
80286 
or 
-other identification markings relating to devices complying with the abovementioned description10ex 8542 11 6436Communications processor of N-MOS (including H-MOS) technology, with a processing capacity of 16 bits, consisting of a random-access memory (RAM) with a storage capacity of 22 Kbits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 15×60 mm, with not more than 48 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
TMS 38010 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 6442Communication processor of C-MOS technology, with a processing capacity of 16 bits, containing a coder/decoder for the conversion of data into serial/parallel signals, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 28×28 mm, with not more than 132 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
TMS 380 C 16 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 6705Coprocessor of C-MOS technology, with a processing capacity of 32 bits, for a local area network, comprising a data interface unit, a bus interface unit, a direct memory access (DMA) controller and FIFO (first in, first out) read/write memories with a total storage capacity of 1 536 bits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 63×63 mm, with not more than 132 connections and bearing: 
-an identification marking consisting of or including the following combination of figures: 
82596 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 6731Microprocessor of N-MOS (including H-MOS) technology, with a processing capacity of 32 bits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 38×38 mm, with not more than 132 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
CPU 04041871 
NCR 32 000 
NS 32032 
NS 32332 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 6732Microprocessor of C-MOS technology, with a processing capacity of 32 bits, comprising a floating point arithmetic unit with four 80-bit registers, thirty six 32-bit registers, a cache memory with a storage capacity of 4 Kbits and an interrupt controller, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 37×37 mm, with not more than 132 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
80960KB 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 6733Microprocessor with a processing capacity of 32 bits, consisting of one or more random-access memories (RAMs) with a total storage capacity not exceeding 48 Kbits and a floating decimal point arithmetical unit with a capacity of 32 bits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 35×35 mm, with not more than 164 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
DSP 32 C 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 6734Microprocessor of C-MOS technology, with a processing capacity of 32 bits, consisting of a binary arithmetic-logic unit, a floating point arithmetic-logic unit, a decimal arithmetic-logic unit, a control store unit, a virtual memory management unit and registers, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 48×48 mm, with not more than 223 connections and bearing: 
-an identification marking consisting of or including the following combination of figures: 
78201441 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 6735Microprocessor of C-MOS technology, with a processing capacity of 32 bits, with a 32-bit external data-bus and a 32-bit external address-bus, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 48×48 mm, with not more than 208 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures or figures and letters: 
486 
80386 
80486 
79 R 2000 A 
79 R 3000 
AM 29000 
CY7C601 
L 64801 
MC 68020 
MC 68030 
MC 68040 
NS 32532 
NS 32C 032 
R 2000/16 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 6736Microprocessor of C-MOS technology, with a processing capacity of 32 bits, with a 16-bit external data-bus and a 24-bit external address-bus, with a virtual storage address capacity of 64 terabytes, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 31×31 mm, with not more than 100 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
80386 SX 
or 
-other identification marking relating to devices complying with the abovementioned description0ex 8542 11 6737Microprocessor of C-MOS technology, with a processing capacity of 32 bits, consisting of a bus controller, a memory controller, a cache controller and a cache memory with a storage capacity not exceeding 512 Kbits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 38×38 mm, with not more than 227 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
80386 SL 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 6831Microprocessor of C-MOS technology, with a processing capacity of 64 bits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 62×62 mm, with not more than 431 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures: 
21064 
80860 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 7102Microcontroller or microcomputer of C-MOS technology, with a processing capacity of 4 bits, consisting of a read only memory, non-programmable (ROM) with a storage capacity of 2 K×8 bits, a dual-tone multi-frequency (DTMF) generator, a random-access memory (RAM) with a storage capacity of 1 Kbit, whether or not with another random-access memory (RAM) with a storage capacity of 512 bits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 16×54 mm, with not more than 42 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
T 6978 
TCM 8301 
TCM 8302 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 7103Microcontroller or microcomputer of C-MOS technology, with a processing capacity of 4 bits, consisting of a read only memory, non-programmable (ROM) with a storage capacity of 10 Kbits or more but not exceeding 16 Kbits and a random-access memory (RAM) with a storage capacity not exceeding 1 536 bits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 16×54 mm, with not more than 67 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
HD 44750 
TMP 47 C 200 
TMP 47 C 220 
TMP 47 C 221 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 7104Microcontroller or microcomputer of C-MOS technology, with a processing capacity of 4 bits, consisting of a read only memory, non-programmable (ROM) or of a programmable, non-erasable, read only memory (PROM) with a storage capacity not exceeding 8 K×8 bits, random-access memories (RAMs) with a total storage capacity not exceeding 4 Kbits, a dual-tone multi-frequency (DMTF) generator, in the form of a monolithic integrated circuit contained in a housing the exterior dimensions of which do not exceed 21×60 mm, with not more than 100 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
TMP 47 C 452 
TMP 47 C 456 
TMP 47 C 855 
TMP 47 C 858 
TMP 47 P 855 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 71 
ex 8542 11 9105 
01 
Microcontroller or microcomputer with a processing capacity of 4 bits, consisting of a read only memory, non-programmable (ROM), or of a programmable, non-erasable, read only memory (PROM), or of a UV erasable, programmable, read only memory (EPROM) with a capacity not exceeding 128 Kbits and a random-access memory (RAM) with a capacity not exceeding 5 Kbits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 21×60 mm, with not more than 100 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
CD 3200-3299 
HD 38800 
HD 38820 
HD 404189 
HD 404608 
HD 4074608 
HD 44796 
HD 44 800 
HD 44801 
HD 44820 
HD 44840 
HD 44860 
HD 614042 
HD 614080 
MN 1584531 
SMC 6214 
SMC 6215 
SMC 6234 
SMC 6266 
SMC 62 L 34 
T 7767 BS 
TMC 0270-0279 
TMC 0500-0599 
TMC 0980-0989 
TMC 1500-1599 
TMC 1980-1999 
TMP 47 C 1670 
TMP 47 C 670 
TMP 47 P 1670 
TMP 47 P 860 E 
TP 0310-03299 
TP 0450-04599 
TP 0480-04899 
TP 0500-05999 
TSS 200 
TSS 400 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 7106Microcontroller or microcomputer of C-MOS technology, with a processing capacity of 4 bits, comprising a read only memory, non-programmable (ROM) or a programmable, read only memory (PROM) with a storage capacity of 160 Kbits or more and a random-access memory (RAM) with a storage capacity not exceeding 4 Kbits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 20×60 mm, with not more than 64 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
HD 404019 
HD 404919 
HD 4074019 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 7121Microcontroller or microcomputer of N-MOS (including H-MOS) technology, with a processing capacity of 8 bits, consisting of a UV-erasable, programmable, read only memory (EPROM) with a storage capacity of either 14 432 bits, 30 016 bits or 30 208 bits, a random-access memory (RAM) with a storage capacity of either 832 bits or 896 bits, a read only memory, non-programmable (ROM) with a storage capacity of either 920 bits, 1 528 bits or 1 728 bits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 18×54 mm, with not more than 44 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
MC 68705P3 
MC 68705R3 
MC 68705S3 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 7122Microcontroller or microcomputer with a processing capacity of 8 bits, consisting of a programmable, non-erasable, read only memory (PROM) or a UV erasable, programmable, read only memory (EPROM) with a capacity of 32 Kbits and a random-access memory (RAM) with a capacity of 1 Kbit, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×53 mm, with not more than 44 connections, with or without a quartz window on the upper surface and bearing: 
-an identification marking consisting of or including one of the following combinations of figures: 
7742 
8751 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 7123Microcontroller or microcomputer of N-MOS (including H-MOS) technology, with a processing capacity of 8 bits, having peripheral interface functions, consisting of a random-access memory (RAM) with a storage capacity not exceeding 2 Kbits, a read only memory, non-programmable (ROM), a programmable, non-erasable, read only memory (PROM) or a UV erasable, programmable, read only memory (EPROM) with a storage capacity of 16 Kbits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×53 mm, with not more than 44 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures: 
8042 
8742 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 7124Microcontroller or microcomputer of C-MOS technology, with a processing capacity of 8 bits, having a register-to-register architecture, consisting of: 
-a static random-access memory (S-RAM) with a storage capacity of not more than 4 Kbits, 
-a programmable, non-erasable, read only memory (PROM) or an UV-erasable, programmable, read only memory (EPROM) or an electrically erasable, programmable, read only memory (E2PROM) with a storage capacity of not more than 128 Kbits 
and whether or not comprising: 
-an electrically erasable, programmable, read only memory (E2PROM) with a storage capacity not exceeding 4 Kbits, 
in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 30×30 mm, with not more than 100 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
370C010 
370C032 
370C050 
370C052 
370C056 
370C150 
370C156 
370C250 
370C256 
370C310 
370C332 
370C350 
370C352 
370C356 
370C732 
370C756 
370C810 
370C850 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 7125Microcontroller or microcomputer of C-MOS technology, with a processing capacity of 8 bits, consisting of a random-access memory (RAM) with a storage capacity of 256 bits, a read only memory, non-programmable (ROM) with a storage capacity of 16 Kbits, an electrically erasable, programmable, read only memory (E2PROM) with a storage capacity of 2 Kbits, a clock generator, a 4-bit timer, a serial communications interface and a 14-bit digital-to-analogue converter, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 10×29 mm, with not more than 28 connections and bearing: 
ex 8542 11 71 
(cont'd)-an identification marking consisting of or including the following combination of figures and letters: 
HD 401220 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 7126Microcontroller or microcomputer of C-MOS technology, with a processing capacity of 8 bits, consisting of a programmable, non-erasable, read only memory (PROM) or an UV erasable, programmable, read only memory (EPROM) with a storage capacity of 60 Kbits or more but not exceeding 128 Kbits and a random-access memory (RAM) with a storage capacity not exceeding 3 Kbits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 19×54 mm, with not more than 44 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
87C51FB 
87C54 
MC68HC705C8 
or 
-, a sij>other identification markings relating to devices complying with the abovementioned description0I?e1Eij>ex 8542 11 7128Microcontroller or microcomputer of C-MOS technology, with a processing capacity of 8 bits, consisting of a random-access memory (RAM) with a storage capacity of 2 Kbits, a programmable, non-erasable, read only memory (PROM) or a UV erasable, programmable, read only memory (EPROM) with a storage capacity of 64 Kbits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 52×63 mm, with not more than 68 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
77 C 82 
80 C 152 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 7129Microcontroller or microcomputer of C-MOS technology, with a processing capacity of 8 bits, consisting of a random-access memory (RAM) with a storage capacity of 4 Kbits, a read only memory, non-programmable (ROM) or a programmable, non-erasable, read only memory (PROM) or an UV erasable, programmable, read only memory (EPROM), with a storage capacity of 96 Kbits, an electrically erasable programmable, read only memory (E2PROM) with a storage capacity of 4 Kbits and an 8-channel analogue-to-digital converter, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 20×20 mm, with not more than 64 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
MC 68HC11E9 
MC 68HC711E9 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 7130Microcontroller or microcomputer of C-MOS-technology, with a processing capacity of 8 bits, consisting of a read only memory, non-programmable (ROM) with a storage capacity of 192 Kbits, a random-access memory (RAM) with a storage capacity of 4,5 Kbits and an arithmetic coprocessor, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 15×21 mm, with not more than 80 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
CXP80524 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 7131Microcontroller or microcomputer of C-MOS technology, with a processing capacity of 8 bits, consisting of a random-access memory (RAM) with a storage capacity of 3 Kbits, either a read only memory, non-programmable (ROM) or a programmable, non-erasable, read only memory (PROM) or an UV erasable, programmable, read only memory (EPROM), with a storage capacity of 128 Kbits, an analogue-to-digital converter and a digital-to-analogue converter, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 19×58 mm, with not more than 80 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
M 37450E8 
M 37450M8 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 7132Microcontroller or microcomputer with a processing capacity of 8 bits, having universal peripheral interface functions, consisting of a random-access memory (RAM) with a storage capacity of 1 Kbit, a UV erasable, programmable, read only memory (EPROM) with a storage capacity of 2 Kbits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×53 mm, with not more than 44 connections, with a quartz window on the upper surface, and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
D 8742 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 7301Microcontroller or microcomputer of N-MOS technology (including H-MOS), with a processing capacity of 16 bits, comprising at least one read only memory, non-programmable (ROM) with a storage capacity of 510×13 bits or a UV erasable, programmable, read only memory (EPROM) with a storage capacity of 512×13 bits, a random-access memory (RAM) with a storage capacity of 2 Kbits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 16×37 mm, with not more than 28 connections and hearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
PD 7720 
PD 77 P 20 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 7302Microcontroller or microcomputer of C-MOS technology, with a processing capacity of 16 bits and a 16-bit address-bus and an 8-bit data-bus, consisting of a random-access memory (RAM) with a storage capacity of 2 Kbits or more, a read only memory, non-programmable (ROM) or a programmable non-erasable read only memory (PROM) or a UV-erasable, programmable, read only memory (EPROM) with a storage capacity of 64 Kbits or more, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 36×60 mm, with not more than 120 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
MB 89713 
MB 89715 
MB 89P713 
MB 89P715 
MB 89W715 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 7304Microcontroller or microcomputer of C-MOS technology, with an arithmetic-logic unit (ALU) with a processing capacity of 16 bits and an 8-bit data-bus, consisting of a read only memory, non-programmable (ROM) with a storage capacity of 128 Kbits, a random-access memory (RAM) with a storage capacity of 2 Kbits, an 8-channel analogue-to-digital converter, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 26×42 mm, with not more than 68 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
PD 78C14 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 7306Microcontroller or microcomputer of C-MOS technology, with a processing capacity of 16 bits, consisting of a multiplier/accumulator (MAC), an arithmetic-logic shifter, a static random-access memory (S-RAM) with a storage capacity of 48 Kbits and having the function of program memory, a static random-access memory (S-RAM) with a storage capacity of 16 Kbits and a programmable timer, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 30×30 mm, with not more than 80 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
ADSP 2101 
ADSP 2102BS-50 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 7401Microcontroller or microcomputer of C-MOS technology, with a processing capacity of 24 bits, consisting of a read only memory, non-programmable (ROM) with a storage capacity of 60 Kbits or more, random-access memories (RAMs) with a total storage capacity of 12 Kbits or more and a 24-bit floating point data arithmetic unit, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 40×40 mm, with not more than 135 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters : 
MB 86220 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 7408Microcontroller or microcomputer, with an arithmetic-logic unit (ALU) with a processing capacity of 32 bits and a 16-bit data-bus, consisting of random-access memories (RAMs) with a total storage capacity not exceeding 160 Kbits, a read only memory, non-programmable (ROM) or a UV erasable, programmable, read only memory (EPROM) with a storage capacity not exceeding 128 Kbits, in the form of a monolithic integrated circuit contained in a housing the exterior dimensions of which do not exceed 29×54 mm, with not more than 144 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures or of figures and letters: 
320 10 
320 11 
320 C 10 
320 C 15 
320 C 17 
320 C 25 
320 C 50 
320 C 51 
320 E 15 
320 E 17 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 7409Microcontroller or microcomputer of N-MOS (including H-MOS) technology, with a processing capacity of 32 bits, consisting of 24 registers of 32 bits and a random-access memory (RAM) with a storage capacity of 2 Kbits, in the form of a monolithic integrated circuit contained in a housing the exterior dimensions of which do not exceed 24×24 mm, with not more than 68 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
HGC 6127 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 7410Microcontroller or microcomputer with a processing capacity of 32 bits, consisting of one or more random-access memories (RAMs) with a total storage capacity not exceeding 48 Kbits, a read only memory, non-programmable (ROM) with a storage capacity not exceeding 128 Kbits and a floating decimal point arithmetical unit with a capacity of 32 bits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 45×53 mm, with not more than 208 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
DSP 32 
MB 86232 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 7411Microcontroller or microcomputer of C-MOS technology, with a processing capacity of 32 bits, consisting of 2 random-access memories (RAMs) with a total storage capacity of 64 Kbits and a read only memory, non-programmable (ROM) with a storage capacity of 128 Kbits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 69×74 mm, with not more than 325 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
320 C 30 
320 C 40 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 7412Microcontroller or microcomputer of C-MOS technology, with a processing capacity of 32 bits, consisting of a system integration module (SIM) with configuration register, a random-access memory (RAM) with a storage capacity of 16 Kbits, a time processor unit (TPU) with 16 independent programmable channels, a serial peripheral interface and a serial communications interface, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 29×29 mm, with not more than 132 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
MC 68332 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 7501Microcontroller or microcomputer of C-MOS technology, with a processing capacity of 56 bits, consisting of 4 bidirectional buses of 24 bits, 3 read only memories, non-programmable (ROMs) with a total storage capacity of 12,75 Kbits or 102 Kbits and 2 or 3 random-access memories (RAMs) with a total storage capacity of 12 Kbits or 24 Kbits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 48×48 mm, with not more than 132 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
DSP 56000 
DSP 56001 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 7522Floating-point dual port microcontroller or microcomputer of C-MOS technology, with a processing capacity of 96 bits, consisting of a random-access memory (RAM) with a storage capacity of 32 Kbits and 2 random-access memories (RAMs) each with a storage capacity of 16 Kbits and a read only memory, non-programmable (ROM) with a storage capacity of 2 Kbits and 2 read only memories, non-programmable (ROMs) each with a storage capacity of 16 Kbits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 48×48 mm, with not more than 223 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
DSP 96002 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 7701Gate array of C-MOS technology, with metal gates, with an operating voltage of 12 V, with not less than 637 two-input functions, having within the array a digital code produced by an electron beam, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 11×29 mm, with not more than 22 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
FB 215 
or 
-other identification markings relating to devices complying with the abovementioned description7ex 8542 11 82 
ex 8542 11 9501 
31 
Analogue-digital monolithic integrated circuit, capable of controlling brushless motors and keeping their speed constant, contained in a housing the exterior dimensions of which do not exceed 9×25 mm, with not more than 20 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
MGA 3015 A 
SSI 590 
UC 1633 
UC 1634 
UC 3633 
UC 3634 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8202Buffer manager and controller of C-MOS technology, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 36×36 mm, with not more than 160 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
82 C 325 
1TU9-0301 
WD 11 C 00-22 
WD 12 C 00-22 
WD 83 C 580 
WD 83 C 583 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8203Buffer manager and controller of N-MOS (including H-MOS) technology, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×54 mm, with not more than 40 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
WD 1015 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8205Control circuit of C-MOS technology, for controlling a system bus, static or dynamic random-access memory (S-RAM or D-RAM) and 4-channel direct memory access (DMA), in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 20×21 mm, with not more than 100 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
OTI 031 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8215Monochrome display controller (MDC) of C-MOS technology, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 25×30 mm, with not more than 68 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
M 50452 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8216Cathode-ray tube controller (CRTC) of N-MOS (including H-MOS) technology, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 25×62 mm, with not more than 68 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
AM 8052 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8217Cathode-ray tube controller (CRTC) of C-MOS technology in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 32×62 mm, with not more than 100 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
82 C 434 
MB 89321 
MB 89322 
V 6363 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8218Cathode-ray tube video controller, in the form of a monolithic integrated circuit contained in a housing the exterior dimensions of which do not exceed 33×62 mm, with not more than 160 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
82 C 453 
CRT 9007 
CRT 97 C 11 
ET 4000 
TVGA 8900C 
VY 86 C 310 
WD 90 C 10 
WD 90 C 11 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8219Control circuit of C-MOS technology, for cathode-ray tubes and liquid-crystal displays (CRT and LCD controller), in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 30×30 mm, with not more than 160 connections, and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
82 C 425 
CL-GD6410 
V 6355-DJ 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8220Driver circuit of C-MOS technology, for liquid crystal displays (LCD-driver), in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 14×20 mm, with not more than 100 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
HD 44100 
HD 44780 
HD 66100 
LC 7582 
MSM 5259 
MSM 5298 
MSM 5299 
MSM 5839 
SED 1600 
SED 1610 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8221Display controller and character generator (DCCG) of C-MOS technology, for liquid-crystal dot-matrix display system, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 24×26 mm, with not more than 80 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
HD 61830 
LH 5821 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8223Graphics controller of C-MOS technology, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 31×31 mm, with not more than 144 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters or letters: 
82 C 431 
82 C 435 
82 C 441 
OTI 067 
PEGA 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8224Colour selection controller of C-MOS technology, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 19×52 mm, with not more than 44 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
82 C 433 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8225Video controller for graphic and memory functions, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 36×52 mm, with not more than 160 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of letters or of figures and letters: 
82 C 451 
82 C 452 
84 C 451 
AVGA1 
CL GD 5410 
NCR 77C22 
PVGA 
WD 90 C 00 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8227Contention resolving controller of a local area network (LAN), in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 63×63 mm, with not more than 132 connections and bearing: 
ex 8542 11 82 
(cont'd)-an identification marking consisting of or including one of the following combinations of figures or figures and letters: 
82586 
82588 
82590 
82592 
AM 7990 
COM 9026 
DP 8390 
DP 83932 
MB 86950 
WD 80 C 24 
WD 83 C 503 
WD 83 C 510 
WD 83 C 603 
WD 83 C 690 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8228Control circuit of C-MOS technology, operating at 12 MHz consisting of a programmable interval timer, a clockgenerator, two direct memory access controllers and a memory mapper, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 30×30 mm, with not more than 84 connections and bearing: 
-an identification marking consisting of or including the following combination of figures: 
82231 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8229Circuit with a multimaster bus, of C-MOS technology, for controlling a local channel in 16 bits automatic data-processing machines, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 30×30 mm, with not more than 132 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures: 
82303 
82304 
82306 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8230Control circuit of C-MOS technology, for controlling the sequence of 4-bit addresses for execution of instructions in a microprogramme memory, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 14×38 mm, with not more than 28 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
CY2909 
CY2911 
CY7C909 
CY7C911 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8231Seven-channel, programmable, direct memory access (DMA) controller, of C-MOS technology, comprising 2 eight-channel programmable interrupt controllers and 5 programmable 16-bit timers/counters, in the form of a monolithic integrated circuit, containing in a housing the exterior dimensions of which do not exceed 32×32 mm, with not more than 132 connections and bearing: 
-an identification marking consisting of or including the following combination of figures: 
82357 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8233Eight-channel control circuit of C-MOS technology, for maintaining a constant electromagnetic traction force with incorporated diodes and a storage capacity of 8 bits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 9×28 mm, with not more than 22 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
UCN 5801 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8234Monolithic integrated circuit with at least 16 analogue switching elements, of C-MOS technology, for controlling signals of 20 Hz or more but not exceeding 20000Hz, capable of dealing with signals up to 3 V with a distortion of not more than 0,05 % over the whole frequency range at a voltage of 1 V, contained in a housing the exterior dimensions of which do not exceed 16×40 mm, with not more than 42 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
TC 9164 N 
TC 9177 P 
TC 9184 P 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8235Control circuit of C-MOS technology, for the management of asynchronous cycles of a 32-bit central processing unit (CPU), of a direct memory access (DMA) circuit and of a multimaster bus, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 31×31 mm, with not more than 100 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters : 
82 C 321 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8236Control circuit of C-MOS technology, consisting of two direct memory access (DMA) controllers, two interrupt controllers, a timer or a timer/counter and at least one memory mapper, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 33×33 mm, with not more than 208 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
82C206 
82C316 
GC 101 SX 
HT 101 SX 
VL 82 C 486 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8237Control and management circuit containing 2 direct memory access (DMA) controllers, 2 interrupt controllers, 2 serial port controllers, one parallel port controller and a power management circuit, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 39×39 mm, with not more than 196 connections and bearing: 
ex 8542 11 82 
(cont'd)-an identification marking consisting of or including the following combination of figures and letters: 
82360SL 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8238Control circuit of C-MOS technology, providing signalling protocol for interfacing master buses and slave buses, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 26×26 mm, with not more than 100 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
SN 74ACT2440 
SN 74ACT2441 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8240Control circuit of C-MOS technology, for controlling and interfacing signals between a central processing unit (CPU), memory and input/output interfaces, comprising circuits for refreshing dynamic random-access memories (DRAMs), for decoding of addresses, for generating clock signals and monitoring data transfer interrupt signals, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 30×30 mm, with not more than 84 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
344 S 0602 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8241Control circuit of C-MOS technology, for multiplexing the address bus of a central processing unit (CPU), consisting of 41 bus control circuits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 31×31 mm, with not more than 84 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
82 C 103 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8242Memory management unit of N-MOS (including H-MOS) technology (N/H-MOS MMU), with an addressing capacity not exceeding 4 Gbytes, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 36×82 mm, with not more than 132 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures or of figures and letters: 
0404 1872 
68451 
NS 32082 
NS 32382 
TX 32082 W 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8243Memory management unit (MMU) of C-MOS technology, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 53×53 mm, with not more than 244 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
CY7C604 
CY7C605 
MC 68851 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8244Memory control circuit of C-MOS technology, operating at a rate of 10 MHz or more, with a video-memory access, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 36×36 mm, with not more than 144 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
82 C 222 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8245Memory control circuit of C-MOS technology, operating at a rate of 16 MHz or more, with a memory access of 32 bits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 36×36 mm, with not more than 144 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
82 C 302 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8246Control and management circuit for cache memories, of C-MOS technology, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 45×45 mm, with not more than 208 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures or figures and letters: 
82385 
82395 
82485 
82495 XP 
A 38202 
T 9490 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8247Direct memory access (DMA) controller, comprising the detection and the control of the refreshment of dynamic random-access memories (D-RAMs), of C-MOS technology, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 32×32 mm, with not more than 84 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
VC 2730-000 1 C 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8248Dynamic random-access memory controller (D-RAM controller), capable of multiplexing addresses, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 39×63 mm, with not more than 196 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures or of figures and letters: 
82359 
82 C 08 
THCT 4502 
VL 4502 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8250Control circuit of C-MOS technology for dynamic random-access memories (D-RAMs), with an address buffer for upper address-bits, a memory decoder and a speaker controller, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 31×31 mm, with not more than 84 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
82C102 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8262Input-output circuit of N-MOS (including H-MOS) technology for data control, equipped with a timing control with a static random-access memory (S-RAM) with a storage capacity of 128×8 bits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 16×54 mm, with not more than 40 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures or figures and letters: 
6532 
CO 10750 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8263Control circuit, of N-MOS (including H-MOS) technology, for data/address flows from the central processing unit (CPU), inputs/outputs and the main memory, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 36×36 mm, with not more than 132 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
CIM 1456 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8264Control circuit for data block transfer between dynamic memory and peripherals (DMA transfer controller or 'DTC'), in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 38×63 mm, with not more than 160 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures or figures and letters: 
82307 
82380 
82 C 223 
GC 183 
HD 68450 
L1A 4599 
WE 32104 
Z 8516 
Z 9516 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8265Control circuit of C-MOS technology for DC electric motors, comprising a circuit to monitor power supply, a circuit to store and decode addresses and to multiplex data, an 8-bit digital to analogue converter and 5 amplifiers, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×17 mm, with not more than 44 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
GC 27 
GC 45 
or 
-other identification markings relating to devices complying with the abovementioned description 0ex 8542 11 8266Floppy-disc controller of C-MOS technology, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 26×62 mm, with not more than 84 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of letters and figures: 
FE 2100 
G 70360-33 
L 1 A 0519 
MB 89311 
OTI 033 
WD 16 C 92 
WD 76 C 20 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8268Error detection and correction circuit of N-MOS (including H-MOS) technology, capable of detecting and correcting single bit errors and detecting all double bit errors, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 30×30 mm, with not more than 68 connections and bearing: 
-an identification marking consisting of or including the following combination of figures: 
8206 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8269Interpolation pulse generator, of C-MOS technology, for controlling geometrical functions, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×39 mm, with not more than 28 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
KM 3701 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8270Logic control circuit of N-MOS (including H-MOS) technology, consisting of one 7-bit register, three timers, one multiplexer, sequential and combining networks intended to perform control operations, decodifying logic, error detection and management logic and a timing network, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 23×82 mm, with not more than 64 connections and bearing: 
ex 8542 11 82 
(cont'd)-an identification marking consisting of or including the following combination of figures and letters: 
MIC 0482 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8271Control circuit of C-MOS technology, for a microprogramme, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×54 mm, with not more than 44 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
CY 2910 
CY 7C 910 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8273Multiprotocol control circuit for the serial transmission of data of N-MOS (including H-MOS) technology, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 18×54 mm, with not more than 44 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
MC 2652 
MC 68652 
SCN 2652 
SCN 68652 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8274Control circuit of C-MOS technology, for the control of constant power supply of 60 V / 500 mA, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 13×13 mm, with not more than 28 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
UCN 5816 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8275Control circuit, of C-MOS technology, for monitoring the tension of random-access memories (RAMs) in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×54 mm, with not more than 16 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
BQ 2201 
BQ 2202 
BQ 2204 
BQ 2502 
BQ 2503 
DS 1210 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8278Sequential data control circuit for interface between a hard-disc memory unit and the memory control unit, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 30×54 mm, with not more than 100 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures or of figures and letters: 
61156-001 
61157-001 
AIC 010 
AIC 100 
AIC 610 L 
AIC 6190 
AIC 65 C 10 B 
OMTI 505 
CL SH250 
CL SH260 
CL SH265 
CL SH350 
CL SH360 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8280Serial and parallel communication controller of C-MOS technology, comprising 2 universal asynchronous receiver/transmitters (UARTs), in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 26×26 mm, with not more than 80 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
82C605 
82C606 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8281Controller for servo-devices of C-MOS technology, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×54 mm, with not more than 40 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
KM 3702 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8282Timing control unit (TCU) with two-phase cycle for central processing unit (CPU) and memory management unit (MMU), in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 16×33 mm, with not more than 40 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
NS 32201 
NS 32 C 201 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8283Control circuit for the universal asynchronous transmission and the separation of data and interface for peripherals, of C-MOS technology, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 27×27 mm, with not more than 80 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
82 C 607 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8402Bus interface circuit in C-MOS technology, for the control of communication lines comprising a numerical bus, two independent receivers and a transmitter consisting of a FIFO (first in, first out) memory, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 20×52 mm, with not more than 44 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
HS 3282 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8403Bus interface circuit with a programmable data transfer rate, of N-MOS (including H-MOS) technology, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 28×28 mm, with not more than 132 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
TMS 38030 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8404Bus interface circuit of C-MOS technology, for synchronous/asynchronous data transfer between a microprocessor and control circuits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 31×31 mm, with not more than 100 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
AIC 6250 
ESP 216 
ESP 226 
FAS 216 
FAS 226 
FAS 236 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8405Bus interface for graphic controllers, of C-MOS technology, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 31×31 mm, with not more than 84 connections and bearing: 
-an identification marking consisting of or including the following combination of letters: 
PBI 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8406Bus interface circuit of C-MOS technology, for the management of I/0 data flow in signal lines, with 4 independent transceivers, a circuit with 4×2-input NAND gates, a circuit with 4×2-input AND gates, a separator circuit, a flip-flop circuit, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 31×31 mm, with not more than 84 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
FE 3030 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8421Control circuit for bus interface, functioning as an adaptor between the central processing unit (CPU) and the external control units, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 26×63 mm, with not more than 68 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
NCR 5380 
NCR 5381 
NCR 53 C 80 
NCR 53 C 90 
WD 33 C 92 
WD 33 C 93 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 84 
ex 8542 11 95 
23 
56 
Serial interface, capable of implementing the data stream encoding, decoding and associated control functions for a local area network (LAN), in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 16×33 mm, with not more than 24 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures or figures and letters: 
8002 
8023 
82501 
82 C 501 
AM 7991 
COM 9032 
COM 91 C 32 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8424Interface circuit for a text data decoder of C-MOS technology, capable of data-slicing, clock regeneration and synchronization separation, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 8×25 mm, with not more than 20 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
CF 72303 
CF 72306 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8425Interface circuit of C-MOS technology, for signals between a peripheral hard-disc memory unit and a central processing unit (CPU), in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 53×62 mm, with not more than 80 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
AIC 560 L 
DP 8466 
OMTI 5080 (OMTI 20508) 
OMTI 5090 (OMTI 20509) 
WD 11 C 00-17 
WD 14 C 00-17 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8426Flow meter interface of BiMOS technology, consisting of 16 amplifiers, 3 digital-to-analogue converters, an analogue-to-digital converter, filters, a sample and hold circuit, an oscillator, a phase locked loop (PLL) circuit and a serial interface circuit for a microprocessor, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 25×25 mm, with not more than 68 connections and bearing: 
ex 8542 11 84 
(cont'd)-an identification marking consisting of or including the following combination of figures and letters: 
AD75027 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8427Interface circuit of C-MOS technology, for a keyboard with a capacitive matrix, capable of matrix scanning and detection, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 14×52 mm, with not more than 40 connections and bearing: 
-an identification marking consisting of or including the following combination of figures: 
22-00958-000 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8428Interface circuit of C-MOS technology, between 32-bit microprocessors and 16-bit peripheral units and for controlling dynamic random-access memories (D-RAMs), in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 30×30 mm, with not more than 132 connections and bearing: 
-an identification marking consisting of or including the following combination of figures: 
82335 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8429Interface circuit of C-MOS technology, capable of interfacing between a graphic microprocessor, dynamic random-access memories (D-RAMs) and a colour palette register, generating local memory address and control signals for the graphic microprocessor, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 30×30 mm, with not more than 132 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
TMS 34092 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8432Control and interface circuit for controlling a bi-directional 32-bit data/address flow between several buses, capable of operating in data mode with parity check, in data mode without parity check and in address mode, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 33×33 mm, with not more than 120 connections and bearing: 
-an identification marking consisting of or including the following combination of figures: 
82352 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8433Interface and control circuit of C-MOS technology, for controlling data communication between a system bus interface and peripheral units, comprising a system interface gate, a microprocessor gate and a direct memory access (DMA) gate, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 15×21 mm, with not more than 100 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
1TU1-0301 
1TU2-0301 
1TV3-0301 
1TV3-0302 
1TV4-0301 
1TV4-0302 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8434Control and interface circuit of C-MOS technology, capable of receiving, processing and transmitting subscriber data in a digital network, comprising a line interface unit, a multiplexer, an audio processor, a data link controller, a microprocessor interface and an oscillator, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×17 mm, with not more than 44 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
AM 79C32A 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8435Interface and control circuit of C-MOS technology, for interfacing and controlling the data sequence between an automatic data-processing machine and a rigid disc storage unit, comprising a dual-port buffer memory manager, a sequencer control circuit, a microprocessor interface and a bus interface having 24 mA drivers, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 30×30 mm, with not more than 100 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
AIC-6060 
SSI 32C260 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8436Control circuit of C-MOS technology, for a floppy disc-unit and data transfer rate, for precompensation of write signals, for data separation, for clock-signal generation and for interfacing a central processing unit (CPU), in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 26×62 mm, with not more than 68 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures or figures and letters: 
82077 
DP 8473 
WD 37C65 
WD 57C65 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8438Bus control and interface circuit of C-MOS technology, assuring the functions of interruptions control, of refreshing dynamic random-access memory (D-RAM), of parallel port control and address decoding, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 33×33 mm, with not more than 160 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
GC186 
L1A4982 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8439Control and interface circuit of C-MOS technology, for controlling a keyboard and a pointing device (so-called 'mouse'), consisting of two serial communication controllers, a bidirectional parallel port controller, an interrupt controller and a timer/counter, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 15×21 mm, with not more than 100 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
OTI-032 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8440Control and interface circuit for central processing unit (CPU) of C-MOS technology, comprising a control unit for the refreshment of memories, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 31×31 mm, with not more than 100 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
FE 3010 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8441Control and interface circuit of C-MOS technology, for a central processing unit (CPU) and random-access memory (RAM), in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 28×28 mm, with not more than 160 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
GC 132 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8442Interface and control circuit of C-MOS technology, capable of interfacing between a graphic microprocessor, dynamic random-access read/write memories (D-RAMs) and an automatic data-processing machine expansion bus, comprising a sequence controller, an address mapper, a data mapper, registers, a display controller and an access arbitration circuit, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 30×30 mm, with not more than 132 connections and bearing: 
ex 8542 11 84 
(cont'd)-an identification marking consisting of or including the following combination of figures and letters: 
TMS 34096 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8443Control and interface circuit between a microprocessor with a processing capacity of 32 bits and a floating point coprocessor, of C-MOS technology, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 54×54 mm, with not more than 299 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
CY 7 C 608 
L 64802 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8444Control and interface circuit of C-MOS technology, operating at 12 MHz, consisting of a clock generator, a bus controller for a microprocessor, a timer, two programmable interrupt controllers and an interface for numeric coprocessor, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 30×30 mm, with not more than 84 connections and bearing: 
-an identification marking consisting of or including the following combination of figures: 
82230 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8445Control and interface circuit of C-MOS technology, comprising 2 interrupt controllers, three 16-bit programmable timer-counters, a real time clock and a numeric microprocessor interface, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 28×28 mm, with not more than 120 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
TACT 82303 PB 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8446Control and interface circuit of C-MOS technology, comprising 48 mA drivers, registers, an 18-bit direct memory access (DMA) interface, 8-bit microprocessor bus and a parity generator and checker, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 31×31 mm, with not more than 100 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
NCR 53C94 
NCR 53C95 
NCR 53C96 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8484Cathode-ray tube control and interface circuit of C-MOS technology, capable of controlling graphic modes EGA and VGA, interfacing between a graphic microprocessor, dynamic random-access memories (D-RAMs) and a colour palette register, clock generation and multiplexing pixel data, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 26×26 mm, with not more than 100 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
TMS 34098 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8601Arithmetic-logic unit (ALU) of C-MOS technology, with a capacity of 16 bits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 29×83 mm, with not more than 68 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
CY7C9101 
CY7C9115 
CY7C9116 
CY7C9117 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8603Arithmetic-logic unit (ALU) of C-MOS technology, with a capacity of 4 bits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 29×83 mm, with not more than 44 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
CY 2901 
CY7C 901 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8604Arithmetic-logic unit of N-MOS (including H-MOS) technology (N/H-MOS ALU), consisting of one 32-bit register, one 24-bit register, one 4-bit register, 12 1-bit registers, two 16×24-bit service memories, one logic network performing arithmetic and logic operations, decodifying logic, and error detection and management logic, one 8-bit counter and a timing network, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 23×82 mm, with not more than 64 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
ALU 0486 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 86058-bit (octal) buffer/line driver of C-MOS technology, with a propagation delay not exceeding 9,5 ns, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 10×27 mm, with not more than 20 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
74FCT240 
74FCT241 
74FCT244 
74FCT540 
74FCT541 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 86068-bit identity comparator of C-MOS technology, with a propagation delay of not more than 7,2 ns, capable of bit for bit comparison of 2 words of not more than 8 bits each, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 10×27 mm, with not more than 20 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
74FCT521 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 86078-bit (octal) transparent latch of C-MOS technology, with a propagation delay not exceeding 12 ns, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 10×27 mm, with not more than 20 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
74FCT373 
74FCT533 
74FCT573 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 86088-, 9- or 10-bit bus interface latch of C-MOS technology, with a propagation delay not exceeding 20 ns, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 12×33 mm, with not more than 28 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
74FCT841 
74FCT843 
74FCT844 
74FCT845 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 86098-bit (octal) register of C-MOS technology, with a propagation delay not exceeding 11 ns, consisting of 8 D-type-flip-flops, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 10×27 mm, with not more than 20 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
74FCT374 
74FCT534 
74FCT574 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 86108-, 16- or 18-bit bidirectional transmitter/receiver of C-MOS technology, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 10×27 mm, with not more than 56 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
74 AC 16472 
74 AC 16646 
74 AC 16657 
74 ACT 16245 
74 ACT 16470 
74 ACT 16863 
74 FCT 245 
74 FCT 645 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8612Data-buffer/address-buffer circuit, for data transfers between a central processing unit (CPU), a system bus and a memory bus or for address transfers between a system bus, a local bus and dynamic random-access memories (D-RAMs), comprising 2 parity error detection circuits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 30×30 mm, with not more than 84 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
GC 102 
HT 102 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8621Analogue-to-digital converter of C-MOS technology, capable of driving a 3,5 digit liquid crystal (LCD) or light emitting diode (LED) display, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 18×54 mm, with not more than 44 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
ICL 7106 
ICL 7107 
ICL 7116 
ICL 7117 
ICL 7126 
ICL 7136 
ICL 7137 
MAX 136 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 86227-channel analogue-to-digital converter with a capacity of 15 bits per channel, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 18×18 mm, with not more than 44 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
MAX 133 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 86238-bit analogue-to-digital parallel converter of C-MOS technology, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 16×39 mm, with not more than 28 connections and bearing: 
-an identification marking consisting of or including the following combinations of figures and letters: 
IDT 75C48 
IDT 75C58 
MP 7683 
MP 7684 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 86 
ex 8542 11 98 
24 
01 
12-bit analogue-to-digital converter, incorporating a voltage reference and clock, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 18×55 mm, with not more than 60 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
AD 574 A 
TSC7109 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 862516-, 18- or 20-bit analogue-to-digital converter of C-MOS technology, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×54 mm, with not more than 44 connections and bearing: 
-an identification marking consisting of or including one the following combinations of figures and letters: 
CS 5016 
CS 5101 
CS 5102 
CS 5116 
CS 5126 
CS 5316 
CS 5317 
CS 5326 
CS 5327 
CS 5328 
CS 5329 
CS 5336 
CS 5337 
CS 5338 
CS 5339 
CS 5346 
CS 5349 
CS 5501 
CS 5503 
CS 5505 
CS 5506 
CS 5507 
CS 5508 
CS 5516 
CS 5520 
DSP 56ADC16 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8626Analogue-to-digital signal converter, containing amplifiers, digital-to-analogue and analogue-to-digital converters with a supply voltage of 12 V (±10 %) and a digital serial interface with asynchronous receiver/transmitter, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 18×18 mm, with not more than 44 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
AD 75002 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8627Audio digital-to-analogue converter of C-MOS technology, with a dynamic range of 93 dB or more, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 16×38 mm, with not more than 44 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
CS 4328 
TMS 57010 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 86328-bit digital-to-analogue converter of C-MOS technology, capable of double buffering 8-bit words and of 4-quadrant multiplication, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 11×27 mm, with not more than 20 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
DAC 0830 
DAC 0831 
DAC 0832 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8633Quadruple 12-bit digital-to-analogue converter of BiMOS technology, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 18×40 mm, with not more than 44 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
AD 664 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8643Clock circuit of C-MOS technology, with audio and with or without hour-count output, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×33 mm, with not more than 24 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures or figures and letters: 
7910 
SVM 5530 
or 
-other identification markings relating to devices complying with the abovementioned description 
These devices are for use in the manufacture of goods falling within Chapter 91 (a)0ex 8542 11 8646Clock/calendar circuit of C-MOS technology, incorporating a quartz crystal oscillator, independent timer registers and a timer, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×33 mm, with not more than 24 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures or figures and letters: 
58274 
MM 58167 
MM 58174 A 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8647Clock/calendar circuit of C-MOS technology, incorporating a programmable generator for periodic interruptions and square waves, and a static random-access memory (S-RAM) with a storage capacity of 400 bits or 1 Kbit, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 16×33 mm, with not more than 28 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
MC 146818 
MCCS 146818 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8651Clock generator for a graphics controller of C-MOS technology, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 10×27 mm, with not more than 20 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
82 C 402 
ICS 1394 
PCLK 1 
PCLK 2 
TCK 9002 
WD90C61 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8652Clock-generator of C-MOS technology, for the generation of clock and control signals for a digital to analogue video converter with random-access memory (RAMDAC), in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 14×38 mm, with not more than 28 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
Bt438 
Bt439 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8655Generator of C-MOS technology, for a user-definable cursor, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 8×33 mm, with not more than 24 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
Bt431 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8657Programmable asynchronous communication element circuit of C-MOS technology, for the asynchronous transmission and reception of data, comprising a FIFO (first in, first out) read/write memory with a storage capacity of 128 bits and at least one serial input/output channel and a bi-directional parallel channel, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 26×26 mm, with not more than 68 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
16C551 
16C552 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8658Address comparator of C-MOS technology, consisting of one or more static random-access memories (S-RAMs), a parity generator, a parity checker and one or more comparators, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 20×65 mm, with not more than 48 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
SN 74 ACT 2151 
SN 74 ACT 2152 
SN 74 ACT 2153 
SN 74 ACT 2154 
SN 74 ACT 2156 
SN 74 ACT 2157 
SN 74 ACT 2158 
SN 74 ACT 2159 
SN 74 ACT 2160 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8659Data compression/decompression circuit of C-MOS technology, comprising 2 direct memory acces (DMA) ports and a microprocessor interface, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 20×28 mm, with not more than 100 connections and bearing: 
ex 8542 11 86 
(cont'd)-an identification marking consisting of or including one of the following combinations of figures and letters: 
1XH4-0301 
1XK6-0301 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8661Computing unit without an internal programme sequencer for the multiplication or processing of fixed and floating point numbers, of C-MOS technology, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 42×42 mm, with not more than 144 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
ADSP 3210 
ADSP 3220 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 86628-channel demodulator/filter of BiMOS technology, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 18×18 mm, with not more than 44 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
AD 75030 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 86 
ex 8542 11 98 
63 
09 
Smoke detector operating in a temperature range of -20 °C or more but not exceeding 60 °C, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 9×23 mm, with not more than 18 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
MC 14467 
MC 14468 
MC 14471 
MC 145010 
CS 235 
V 24216 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8664Scan and signal distributor of C-MOS technology, consisting of a data and clock extraction unit, a control unit, a contact bounce elimination circuit, a current source control unit, a 17-bit shift register and a data output formatting unit, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 16×54 mm, with not more than 40 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
QMV 16 
or 
-other identification marking relating to devices complying with the abovementioned description0ex 8542 11 8665Encoder/decoder of C-MOS technology, for the conversion of data into NRZ (Non-Return-to-Zero) format or RLL (Run-Length-Limited) format, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 12×12 mm, with not more than 28 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures or figures and letters: 
61158 
CL-SH110 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8667Linear phase digital filter of C-MOS technology, capable of filtering phase periods into a 24 bits serial format, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 13×13 mm, with not more than 28 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
CS 5322 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8669Echo and reverberation module, comprising a multiplier/accumulator, two random-access memories (RAMs) with a total storage capacity of 4 Kbits and a read only memory, non-programmable (ROM) with a storage capacity of 12 Kbits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 25×25 mm, with not more than 68 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
VC5344 
VC5909 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 86708×8-bit multiplier accumulator (MAC) of C-MOS technology, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 16×62 mm, with not more than 48 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
ADSP 1008-A 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8671Adaptive differentiated pulse-code-modulation circuit of C-MOS technology, for encoding/decoding speech and data, having 8 independent channels with a bandwith of 8 kHz and capable of full and half duplex data-transfer at a rate of 32 000 bits per second, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 15×38 mm, with not more than 28 connections and bearing: 
ex 8542 11 86 
(cont'd)-an identification marking consisting of or including the following combination of figures and letters: 
SC 11360 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8672Pulse-code-modulation codec of N-MOS (including H-MOS) technology (N/H-MOS PCM), consisting of a sample and hold circuit digital-to-analogue converter, comparator, successive approximation register and logic function to interface to a full duplex PCM link, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 11×29 mm, with not more than 22 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
2911 A-1 
or 
-other identification markings relating to devices complying with the abovementioned description7ex 8542 11 8673Pulse-code-modulation transmit/receive filter of N-MOS (including H-MOS) technology (N/H-MOS PCM), for a PCM line or trunk termination, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 10×21 mm, with not more than 16 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
D 2912 A 
or 
-other identification markings relating to devices complying with the abovementioned description7ex 8542 11 8674Single or triple digital-to-analogue video converter with random-access memory (RAMDAC) of C-MOS technology, having one or more colour palette registers and multiple pixel ports with internal multiplexing, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 39×39 mm, with not more than 132 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
357S0010 
357S0011 
357S0012 
Bt451 
Bt458 
Bt459 
Bt460 
Bt461 
Bt462 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 86758-channel universal asynchronous receiver/transmitter of C-MOS technology (C-MOS Octal UART) , in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 32×53 mm, with not more than 84 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
1TQ1-0202 
SCC 2698 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8676Encoder/decoder of N-MOS (including H-MOS) technology, for the conversion of data into serial or parallel signals, consisting of an arithmetic logic unit (ALU) and a read only memory, non-programmable (ROM) with a storage capacity of 128 Kbits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 15×60 mm, with not more than 48 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
TMS 38020 
TMS 38021 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8678Universal synchronous receiver/transmitter of C-MOS technology (C-MOS USRT), capable of full duplex digital voice and data transfer with a total speed of 160 Kbits/s over a distance of 1 km, consisting of a modulator, a demodulator, data buffers, transmit data registers and receive data registers, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 15×33 mm, with not more than 24 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
MC145421 
MC145425 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8679Universal synchronous receiver/transmitter of C-MOS technology (C-MOS USRT), capable of full duplex digital voice and data transfer with a total speed of 80 Kbit/s over a distance of 2 km, consisting of a modulator, a demodulator, two data buffers, a transmit data register and a receive data register, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 10×29 mm, with not more than 24 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
MC145422 
MC145426 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8682Transmitter/receiver of C-MOS technology, with a propagation delay not exceeding 11 ns, consisting of two 8-bit back-to-back registers, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 9×33 mm, with not more than 28 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
29FCT52 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8683Transmitter/receiver of BiMOS technology, for bidirectional 16-bit data transmission, comprising a data/address multiplexer/demultiplexer, data storage latches and an 8-bit control circuit, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 26×26 mm, with not more than 68 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
SN 74 BCT 2423 
SN 74 BCT 2424 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8684Transmitter/receiver of BiMOS technology, for multiplexed data/address transmission, comprising D-type flip-flops, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 26×26 mm, with not more than 100 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
SN 74 BCT 2420 
SN 74 BCT 2425 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8687Circuit for the recording and reproduction of speech of C-MOS technology, working at a programmable speed of 8 Kbits/sec or more, with an amplifier and a 10 bit digital-to-analogue converter, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 18×22 mm, with not more than 67 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
T 6668 
TC 8830 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8688Hall effect sensor of BiMOS technology, capable of communicating over a 2-wire bus, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 5×5 mm, with not more than 3 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
UGN 3055U 
UGS 3055U 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 86 
ex 8542 11 9889 
15 
Hard-disc data separator (HDDS), in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 16×37 mm, with not more than 28 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
DP 8460-2 
DP 8460-3 
DP 8460-4 
DP 8465 
HDC 9226 
WD 10 C 20 
WD 10 C 21 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8691Subscriber line audio-processing circuit (SLAC) with 2 digital signal processors, an analogue-to-digital converter and a digital-to-analogue converter, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×39 mm, with not more than 28 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
AM 7901 
AM 7905 
or 
-other identification markings relating to devices complying with the abovementioned description7ex 8542 11 8693Signal synthesizer of N-MOS (including H-MOS) technology with a frequency generator, a memory of 15 instrumental tones, a digital-to-analogue converter and a quartz oscillator, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 8×25 mm, with not more than 18 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
YM 2413 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8694Digital signal synthesizer of C-MOS technology, comprising 32 or 48 frequency generators, a clock generator and an address generator, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 31×31 mm, with not more than 84 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
VC 2375 
VC 5395 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8695Phoneme speech synthesizer of C-MOS technology, with a supply current of less than 10 mA, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×39 mm, with not more than 28 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
CD 54121 N2L 
CD 54122 N2L 
CD 54123 N2L 
CD 54147 N2L 
CM 54104 
CM 54145 N2L 
CM 54146 N2L 
CM 54166 N2L 
SC 01 
SSI 263 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8697Programmable digital signal synthesizer of C-MOS technology, for the generation of digital sound signals with random-access memory (RAM) with a storage capacity of 16 Kbits, with a sampling rate of 22,257 kHz and 44,1 kHz and two output channels for mono or stereo signals, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 18×18 mm, with not more than 44 connections and bearing: 
ex 8542 11 86 
(cont'd)-an identification marking consisting of or including the following combination of figures and letters: 
344 S 0053 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 8698Translator of BiMOS technology, to convert to emitter-coupled logic (ECL) levels or to transistor-transistor logic (TTL) levels, capable of bus driving of full duplex data transmission, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 31×31 mm, with not more than 84 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
CY10E383 
CY101E383 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 9021Static random-access memory of bipolar technology (bipolar S-RAM), with a storage capacity of 64×9 bits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 16×40 mm, with not more than 28 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
82 S 09 
MBM 93419 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 9026Static random-access memory of GaAs technology (GaAs S-RAM), with a storage capacity of 1 Kbit, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 13×13 mm, with not more than 40 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
12G014 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 9027Random-access memory of ECL technology (ECL-RAM) with a storage capacity of 256×4 bits and an access time not exceeding 8 ns, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 11×32 mm, with not more than 24 connections and bearing: 
-an identification marking consisting of or including the following combination of figures: 
10422 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 9028Static random-access memory of TTL technology (TTL S-RAM), with a storage capacity of 1 Kbit and an access time not exceeding 45 ns, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 16×30 mm, with not more than 22 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures: 
93422 
93425 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 9033Random-access memory of ECL technology (ECL-RAM) with a storage capacity of 4 Kbits and an access time not exceeding 50 ns, in the form of a monolithic integrated circuit, 
-with not more than 26 connections as connections on a plastic support 
or 
-contained in a housing the exterior dimensions of which do not exceed 11×32 mm, with not more than 24 connections 
and bearing: 
-an identification marking consisting of or including one of the following combinations of figures: 
10470 
10474 
100474 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 9034Static random-access memory of GaAs technology (GaAs S-RAM), with a storage capacity of 4 Kbits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 13×13 mm, with not more than 40 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
12G044 
or 
-other identification markings relating to devices complying with the abovementioned description 0ex 8542 11 9035Random-access memory of ECL technology (ECL-RAM), with a storage capacity of 16 Kbits and an access time not exceeding 15 ns, in the form of a monolithic integrated circuit, contained in a housing the dimensions of which do not exceed 18×37 mm, with not more than 28 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures: 
10480 
10484 
100484 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 9040Random-access memory of ECL technology (ECL-RAM), with a storage capacity of 64 Kbits in the form of a monolithic integrated circuit, contained in a housing the dimensions of which do not exceed 10×32 mm, with not more than 24 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures: 
10490 
100490 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 9071Programmable, non-erasable, read only memory (PROM) of GaAs technology with a storage capacity of 4 Kbits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 10×10 mm, with not more than 40 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
14GD048 
14GM048 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 9072Programmable, non-erasable, read only memory (PROM) of Schottky TTL technology, with a storage capacity of 2 Kbits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×39 mm, with not more than 24 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures or figures and letters: 
27 S 12 
27 S 13 
28 L 22 
28 LA 22 
28 L2XMFC 
29613 
29770 
29771 
38510 
5305 
5306 
5308 
5309 
53 S 240 
53 S 241 
54 S 570 
54 S 571 
5604 
5624 
6305 
6306 
6308 
6309 
63 S 240 
63 S 241 
6335 
6336 
7053 
7058 
74 S 570 
74 S 571 
76 LS 03 
7620 
7621 
82 S 114 
82 S 130 
82 S 131 
93436 
93446 
MB 7115 
MB 7116 
MB 7117 
MB 7118 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 9073Programmable, non-erasable, read only memory of bipolar technology (bipolar PROM), with a storage capacity of 16 Kbits and a standby current of 50 mA or more but not exceeding 80 mA, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 14×33 mm, with not more than 24 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
27 PS 191 A 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 9074Programmable, non-erasable, read only memory (PROM), with a storage capacity of 32 Kbits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×39 mm, with not more than 32 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
63 S 3281 
AM 27S43 
MB 7141 
MB 7142 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 910216-bit microprocessor of bipolar technology, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 25×82 mm, with not more than 68 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
AM 29116 
SBP 9989 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 9501Non-erasable, programmable logic device of ECL technology, having registers and a programmable AND array, with not more than 16 inputs and not more than 8 outputs, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 13×33 mm, with not more than 28 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
CY10E301 
CY10E302 
CY100E301 
CY100E302 
or 
-other identification markings relating to devices compying with the abovementioned description0ex 8542 11 9503Programmable logic device, of bipolar technology, with a programmable AND array and fixed OR array, with not more than 22 inputs and 12 outputs, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 12×27 mm, with not more than 28 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
16L4 
16L6 
16L8 
16R4 
16R6 
16R8 
20L8 
20R4 
20R6 
20R8 
22V10 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 9504Programmable logic device of TTL Schottky technology, non-erasable, with not more than 48 AND functions, not more than 8 OR functions, and not more than 16 inputs, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×39 mm, with not more than 28 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures or figures and letters: 
82 S 100 
82 S 101 
93458 
93459 
FP 54 AS 839 
FP 54 AS 840 
FP 74 AS 839 
FP 74 AS 840 
SN 54 LS 333 
SN 54 LS 334 
SN 54 LS 335 
SN 54 LS 336 
SN 74 LS 333 
SN 74 LS 334 
SN 74 LS 335 
SN 74 LS 336 
or 
-other identification markings relating to devices complying with the abovementioned description5ex 8542 11 9505Sextuple or triple flip-flop of the D-type of bipolar technology, with emitter-coupled logic (ECL) input/output, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 13×31 mm, with not more than 28 connections and bearing: 
-an identification marking consisting of or including one of the following combination of figures and letters: 
F100131 
F100151 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 9506Quintuple OR/NOR gate of bipolar technology, with emitter-coupled logic (ECL) input/output, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 13×31 mm, with not more than 28 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
F100102 
F100107 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 9507Sextuple hexadecimal latch of the D-type of bipolar technology, with emitter-coupled logic (ECL) input/output, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 13×31 mm, with not more than 28 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
F100150 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 9508Logic circuit of bipolar technology, with not more than 6 logic functions, a supply voltage of 11 V or more but not exceeding 18 V, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 8×23 mm, with not more than 18 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
FZH 101 A 
FZH 111 A 
FZH 191 
FZH 201 
FZJ 121 
FZK 101 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 950912- or 16-input multiplexer of bipolar technology, with emitter-coupled logic (ECL) input/output, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 13×31 mm, with not more than 28 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
F100163 
F100164 
F100171 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 9510Quintuple differential line receiver of bipolar technology, with emitter-coupled logic (ECL) input/output, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 13×31 mm, with not more than 28 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
F100114 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 95114-stage counter/4-bit shift register of bipolar technology, with emitter-coupled logic (ECL) input/output, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 13×31 mm, with not more than 28 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
F100136 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 95128-bit shift register of bipolar technology, with emitter-coupled logic (ECL) input/output, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 13×31 mm, with not more than 28 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
F100141 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 9513Hexadecimal translator of bipolar technology, to convert to emitter-coupled logic (ECL) levels or to transistor-transistor logic (TTL) levels, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 13×31 mm, with not more than 28 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
F100124 
F100125 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 9534Multiple bus interface circuit (multiple bus buffer) of low-power Schottky (LPS) technology, for interfacing the error correction and detection unit, a system data-bus and a dynamic random-access memory (D-RAM), in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 20×33 mm, with not more than 28 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
AM 2961 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 95398-bit (octal) dynamic memory driver of bipolar technology, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 16×33 mm, with not more than 20 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
AM 2965 
AM 2966 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 9540Control circuit of bipolar technology for the control of dynamic random-access memories (D-RAMs), capable of multiplexing addresses, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 26×67 mm, with not more than 68 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
DP 8408 
DP 8409DP 8419 
DP 8428DP 8429 
MB 1422SN 74 S 409 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 9541Driver circuit of GaAs technology, for controlling laser diodes or other light-emitting diodes (LEDs), in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 7×7 mm, with not more than 18 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
16G07516G076 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 9542Driver circuit for write signals for magnetic tape storage units, of bipolar technology, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 11×29 mm, with not more than 22 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
VT 211 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 9543Error correction and detection unit (ECDU) of bipolar technology, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 46×68 mm, with not more than 208 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures or figures and letters: 
2960 
54 AS 632 
54 AS 63474 AS 632 
74 AS 634 
74 AS 636474 F 630 
74 F 631 
74 LS 63074 LS 631 
DP 8400 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 9544Control circuit of TTL technology, for the firing of magnetic print hammers, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 9×26 mm, with not more than 18 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures: 
801379-002810751-001 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 9545Status and shift control unit of bipolar technology, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 16×57 mm, with not more than 42 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
AM 2904 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 9546Bus interface circuit of advanced Schottky (AS) or advanced low-power Schottky (ALPS) technology, for the management of addresses on datalines, in the form of a monolithic integrated circuit, contained in a housing the external dimensions of which do not exceed 26×26 mm, with not more than 68 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
82 A 20382 A 20482 A 30382 A 304 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 9547Bus interface circuit of advanced Schottky (AS) or advanced low-power Schottky (ALPS) technology, for the management of data flow in the signal lines of the central processing unit (CPU), in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 26×26 mm, with not more than 68 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
82 A 20582 A 30582 A 43682 A 442 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 9548Bus interface circuit of bipolar technology, with 8-, 9- or 10-bit registers, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 9×34 mm, with not more than 24 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
AM 29821 
AM 29822AM 29823 
AM 29824AM 29825 
AM 29826AM 29843 
AM 29844AM 29845 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 9557Interface and control circuit for Manchester-coded data, of Schottky technology, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 8×24 mm, with not more than 20 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
TMS 38052 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 9558Interface and control circuit of bipolar technology, for interfacing signals between data processing machines and coaxial cable in a local area network (LAN), in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 13×23 mm, with not more than 28 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
DP 8392 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 9559Interface circuit for the synchronization of data flow from a hard-disc drive, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 16×35 mm, with not more than 28 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
DP 8462 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 9560Analogue-digital monolithic integrated circuit of bipolar technology for interface signals between the peripheral hard-disc, memory unit and the central processing unit (CPU), contained in a housing the exterior dimensions of which do not exceed 15×50 mm, with not more than 40 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
AD 581 C 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 9561Subscriber line interface circuit (SLIC) of dielectric isolation technology, with an internal programmed constant line current, comprising a resistor network and an operational amplifier, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 18×39 mm, with not more than 28 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
HC 5502 
HC 5504 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 9802Audio digital-to-analogue converter of bipolar technology, with a dynamic range of 96 dB or more, comprising an internal voltage reference, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 16×37 mm, with not more than 28 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
PCM 63P 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 9803Programmable amplifier of bipolar technology, for signals on a digital communications bus, in the form of monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×21 mm, with not more than 44 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
HS 3182 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 9805Clock and data recovery circuit of GaAs technology, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 13×13 mm, with not more than 40 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
16G040 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 9806Comparator circuit of GaAs technology, for phase and frequency differences of frequencies not exceeding 1 GHz, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 13×13 mm, with not more than 40 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
16G044 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 9807Demodulator for phase-shifted signals of bipolar technology, with a clock signal generator and a circuit for parallel to serial conversion, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 15×28 mm, with not more than 30 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
TA 8662 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 9808Demodulator/tone-decoder of bipolar technology for frequency decoding, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 10×21 mm, with not more than 14 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
XR 2211 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 9810Block slave address generator of bipolar technology, for the address generation during block transfers on a bus, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 11×11 mm, with not more than 20 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
SN 74 ALS 2442 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 9811Six- or eight-channel read/write signal generator for hard-disc drives, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 13×13 mm, with not more than 40 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
SSI 117 
SSI 501 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 9812Function generator of bipolar technology for the generation of variable wave-forms, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 10×21 mm, with not more than 16 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
XR 2206 
XR 8038 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 9813Receiver/transmitter of Schottky technology, for Manchester-coded data, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 18×28 mm, with not more than 44 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
TMS 38051 
TMS 38053 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 9814Circuit of bipolar technology, for the regeneration of pulse-code-modulated (PCM) signals, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 10×21 mm, with not more than 16 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
XR C 240 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 9816Data-synchronizer for tape-reading units of bipolar technology, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 15×39 mm, with not more than 28 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
VT 210 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 11 9817Data synchronizer and encoder/decoder of bipolar technology, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 13×21 mm, with not more than 32 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures or letters: 
SSI 32D 532 
SSI 32D 535 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 19 2010Amplifier, in the form of a monolithic integrated analogue circuit, the exterior dimensions of which do not exceed 3×3 mm, for use in the manufacture of products falling within subheading 9021 40 00 (a)0ex 8542 19 2020FM receiver/amplifier of bipolar technology, in the form of an unmounted analogue monolithic integrated circuit, the exterior dimensions of which do not exceed 4×6 mm, for use in the manufacture of products falling within subheading 9021 40 00 (a)0ex 8542 19 3001Amplifier of GaAs technology, having a nominal gain of 18 or more but not exceeding 30 dB and a frequency range of not more than 1,9 GHz, in the form of a monolithic integrated analogue circuit, contained in a housing the exterior dimensions of which do not exceed 7×7 mm, with not more than 18 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
16G071 
16G072 
16G074 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 19 3002Microwave amplifier of bipolar technology, with a nominal gain of 18 dB at 0,5 GHz or 22,5 dB at 1 GHz and 32,5 dB at 0,1 GHz or 26 at 1,5 GHz, in the form of a monolithic integrated analogue circuit, contained in a housing the exterior dimensions of which do not exceed 2×4 mm or the diameter of which does not exceed 3 mm, with not more than 4 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
A-06 
A-08 
N10 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 19 3003Quadruple amplifier of C-MOS technology, with an input current not exceeding 20 pA, in the form of a monolithic integrated analogue circuit, contained in a housing the exterior dimensions of which do not exceed 8×20 mm, with not more than 14 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
LMC 660 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 19 3004Programmable amplifier for driving into an output voltage of -9,5 V or more but not exceeding +14,5 V or into an output current not exceeding 0,5 A, in the form of a monolithic integrated analogue circuit, contained in a housing the exterior dimensions of which do not exceed 9×23 mm, with not more than 18 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
EL 2021C 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 19 3010Amplifier, in the form of a monolithic integrated analogue circuit, contained in a housing the exterior dimensions of which do not exceed 2×4×4 mm, with not more than 10 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
C 05 
V 35 
or 
-other identification markings relating to devices complying with the abovementioned description 
These devices are for the manufacture of products falling within subheading 9021 40 00 (a)0ex 8542 19 3015Amplifier with an input current not exceeding 80 nA, in the form of a monolithic integrated analogue circuit, contained in a housing the exterior dimensions of which do not exceed 8×11 mm or the diameter of which does not exceed 10 mm, with not more than 8 connections and bearing: 
ex 8542 19 30 
(cont'd)-an identification marking consisting of or including one of the following combinations of figures and letters: 
OPA 37 
OPA 111 
OPA 121 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 19 3025Variable amplifiers for the range of frequencies of 10 Hz or more but not exceeding 30 kHz, with a gain of 85 dB or more, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 8×19 mm, with not more than 8 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
M 5218 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 19 3040Thermocouple amplifier for instrumentation control at temperatures from 0 to 50 °C, incorporating an alarm system, in the form of a monolithic integrated analogue circuit, contained in a housing the exterior dimensions of which do not exceed 8×20 mm, with not more than 14 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
AD 594 
AD 595 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 19 3060Winchester disc drive amplifier, in the form of a monolithic integrated analogue circuit, contained in a housing the exterior dimensions of which do not exceed 7×7 mm, with not more than 10 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
A 2480 FC 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 19 3080Amplifier with a programmable gain factor, in the form of a monolithic integrated analogue circuit, contained in a housing the exterior dimensions of which do not exceed 30×45 mm, with not more than 32 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
PGA 102 
PGA 202 
PGA 203 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 19 5010Voltage regulators with a quiescent current of 75 mA and a drop out voltage of 380 mV at 100 mA, in the form of a monolithic integrated analogue circuit, contained in a housing the exterior dimensions of which do not exceed 7×11 mm, with not more than 8 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
LP 2950 
LP 2951 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 19 6003Monolithic integrated analogue circuit of bipolar technology, for driving direct-current motors, working with an output voltage not exceeding 18 V at an output current not exceeding 1,6 A, contained in a housing the exterior dimensions of which do not exceed 9×26 mm, with not more than 10 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
BA 6109 
BA 6209 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 19 6004Analogue-digital controller for brushless motors, capable of controlling speed in forward or reverse direction, in the form of a monolithic integrated analogue circuit, contained in a housing the exterior dimensions of which do not exceed 8×33 mm, with not more than 24 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
MC33033 
MC33034 
MC33035 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 19 6005Control circuit of C-MOS technology, for monitoring the voltage of microprocessors, in the form of a monolithic integrated analogue circuit, contained in a housing the exterior dimensions of which do not exceed 8×12 mm, with not more than 16 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
DS 1231 
DS 1232 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 19 6006Pre-magnetization control circuit for audio magnetic tapes of bipolar technology, in the form of a monolithic integrated analogue circuit, contained in a housing the exterior dimensions of which do not exceed 8×26 mm, with not more than 18 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
PC 1297 CA 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 19 7020Interface and control circuit of C-MOS technology, for the generation of graphic symbols on a cathode-ray tube, in the form of a monolithic integrated analogue circuit, contained in a housing the exterior dimensions of which do not exceed 9×29 mm, with not more than 28 connections and bearing: 
-an identification code consisting of or including the following combination of figures and letters: 
MN 1297 
or 
-other identification relating to devices complying with the abovementioned description0ex 8542 19 8004Monolithic integrated analogue circuit, for the reduction of audio noise by 14 dB, contained in a housing the exterior dimensions of which do not exceed 7×26 mm, with not more than 18 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
HA 12043 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 19 8005Programmable encoder/decoder circuit of C-MOS technology, consisting of an electrically erasable, programmable, read only memory (E2PROM) with a storage capacity of 32 bits, an amplifier and an oscillator, in the form of a monolithic integrated analogue circuit, contained in a housing the exterior dimensions of which do not exceed 8×20 mm, with not more than 14 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
AZ 280 
TMC3637 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 19 8006Analogue modulator of C-MOS technology, having a dynamic range of 123 dB at 375 Hz, in the form of a monolithic integrated analogue circuit, contained in a housing the exterior dimensions of which do not exceed 13×13 mm, with not more than 28 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
CS 5323 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 19 8007AM and FM receiver of bipolar technology, in the form of a monolithic integrated analogue circuit, contained in a housing the exterior dimensions of which do not exceed 14×37 mm, with not more than 28 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
CXA 1030 P 
CXA 1240 P 
or 
-other identification markings relating to devices complying with the abovementioned description7ex 8542 19 8008Delay line of C-MOS technology, for drop-out compensation of video signals, in the form of a monolithic integrated analogue circuit, contained in a housing the exterior dimensions of which do not exceed 7×10 mm, with not more than 8 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
MSM 6965 RS 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 19 8009Switch unit of bipolar technology, for audio signals, having a distortion not exceeding 0,005 %, comprising 2 control units and 2 alternating switches, in the form of a monolithic integrated analogue circuit, contained in a housing the exterior dimensions of which do not exceed 8×13 mm, with not more than 10 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
TK 15022 Z 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 19 8010Monolithic integrated analogue circuit of bipolar technology, for the overload protection of telephone exchanges, contained in a housing the exterior dimensions of which do not exceed 10×11 mm, with not more than 3 connections and bearing: 
-an identification marking consisting of or including the following combination of figures: 
1515 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 19 8012Dual-tone multi-frequency (DTMF) generator of C-MOS technology, capable of decoding 4-bit binary data and generating 16 tone pairs, in the form of a monolithic integrated analogue circuit, contained in a housing the exterior dimensions of which do not exceed 10×11 mm, with not more than 14 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
TP 5088 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 19 8013Frequency converter for the conversion of frequencies of 10,95 GHz or more but not exceeding 12,5 GHz to frequencies of 950 MHz or more but not exceeding 1 750 MHz, in the form of a monolithic integrated analogue circuit, contained in a cylindrical housing with a diameter of not more than 10 mm, with not more than 6 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
20070C 
AKD12000 
AKD12010 
AKD12011 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 19 8014Voltage-to-frequency converter, comprising an amplifier, in the form of a monolithic integrated analogue circuit, contained in a housing the exterior dimensions of which do not exceed 10×24 mm or the diameter of which does not exceed 11 mm, with not more than 20 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
VFC32 
VFC100 
VFC101 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 19 8015Current-to-voltage converter with an input current not exceeding 100 mA and an output voltage not exceeding -10 V, in the form of a monolithic integrated analogue circuit, contained in a housing the exterior dimensions of which do not exceed 8×32 mm, with not more than 24 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
ACF 2101 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 19 8016RMS-converter for computing the root mean square (RMS) value of wave-forms and converting this value to an equivalent direct current or an equivalent direct voltage, in the form of an monolithic integrated analogue circuit, contained in a housing the exterior dimensions of which do not exceed 18×21 mm, or the diameter of which does not exceed 18 mm, with not more than 14 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
AD 536 A 
AD 636 
AD 637 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 19 8017Temperature transducer, in the form of a monolithic integrated analogue circuit, contained in a housing the exterior dimensions of which do not exceed 6×6 mm or the diameter of which does not exceed 10 mm, with not more than 3 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
AD 590 
AD 592 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 19 8018Programmable diode array, consisting of 14 individual diodes and a rectifier, of GaAs technology, in the form of a monolithic integrated analogue circuit, contained in a housing the exterior dimensions of which do not exceed 10×10 mm, with not more than 36 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
16G010 
16G011 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 19 8019Image sensor consisting of a row of not more than 3 648 photosensitive areas and a matrix linked to shift registers, in the form of a monolithic integrated analogue circuit, contained in a housing the exterior dimensions of which do not exceed 12×43 mm, with not more than 22 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
LZ 2019 
PD 3573 
TCD 103 
TCD 105 
TCD 133 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 19 8021Phase-locked loop (PLL) clock circuit of C-MOS technology, capable of synchronisation or multiplication of frequencies of 20 MHz or more but not exceeding 70 MHz, in the form of a monolithic integrated analogue circuit, contained in a housing the exterior dimensions of which do not exceed 13×13 mm, with not more than 28 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
MC 88915 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 19 8022Detector for amplitude peaks in read/write signals of disk storage units, consisting of a differential amplifier with automatic gain control and a precision full-wave rectifier, in the form of a monolithic integrated analogue circuit, contained in a housing the exterior dimensions of which do not exceed 12×12 mm, with not more than 28 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
ML 8464 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 19 8023Voltage comparator of dielectric isolation technology, comprising a master/slave flip/flop, operating within a common voltage range of -12 V or more but not exceeding +12 V and a differential voltage range of -24 V or more but not exceeding +24 V and a response time not exceeding 6 ns, in the form of a monolithic integrated analogue circuit, contained in a housing the exterior dimensions of which do not exceed 10×11 mm or the diameter of which do not exceed 10 mm, with not more than 8 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
EL 2019 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 19 8024Amplifier/comparator of bipolar technology, for the amplification and comparison of phase/frequency signals from sensor inputs, in the form of a monolithic integrated analogue circuit, contained in a housing the exterior dimensions of which do not exceed 6×8 mm, with not more than 24 connections and bearing: 
ex 8542 19 80 
(cont'd)-an identification marking consisting of or including the following combination of figures and letters: 
CXA 1418 N 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 20 1010Microprocessor of C-MOS technology, with a processing capacity of 32 bits, consisting of a single substrate layer on which are mounted 2 chips, one comprising a central processing unit (CPU) and the other a memory unit, in the form of a hybrid integrated circuit, contained in a housing the exterior dimensions of which do not exceed 33×76 mm, with not more than 60 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures: 
57-00000 
57-19400 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 20 30108-bit analogue-to-digital converter, with a conversion time not exceeding 3 microseconds, in the form of a hybrid integrated circuit, contained in a housing the exterior dimensions of which do not exceed 19×37 mm, with not more than 24 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
ADC 82 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 20 3020Video digital-to-analogue converter (VDAC), with a conversion time not exceeding 10 ns, in the form of a hybrid integrated circuit, contained in a housing the exterior dimensions of which do not exceed 20×35 mm, with not more than 24 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
VDAC 0405 H 
VDAC 0605 H 
VDAC 0805 H 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 20 3030Four-channel digital-to-analogue converter, each channel having a capacity of 12 bits, in the form of a hybrid integrated circuit, contained in a housing the exterior dimensions of which do not exceed 21×41 mm, with not more than 28 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
AD 390 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 20 304016-bit digital-to-analogue converter, in the form of a hybrid integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×39 mm, with not more than 28 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
DAC 705 
DAC 706 
DAC 707 
DAC 708 
DAC 709 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 20 5010Amplifier for the frequency range 20 Hz to 20 000 Hz, in the form of a hybrid integrated circuit, contained in a housing the exterior dimensions of which do not exceed 45×80 mm, with not more than 30 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
STK 4041 
STK 4151 
STK 4201 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 20 5020Amplifier for a nominal range of 0 or more but not exceeding 70 kHz, with an isolation voltage of 750 V or more and a leakage of not more than 1 mA, in the form of a hybrid integrated circuit, contained in a housing the exterior dimensions of which do not exceed 16×52 mm, with not more than 40 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures and letters: 
ISO 100 
ISO 102 
ISO 106 
ISO 120 
ISO 121 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 20 5030Amplifier with a programmable gain factor, in the form of a hybrid integrated circuit, contained in a housing the exterior dimensions of which do not exceed 30×45 mm, with not more than 32 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
3606 G 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8542 20 8020Subscriber-connection units (crosspoint switch) with 4 or more but not more than 12 switches and an operating voltage of 150 V or more, in the form of a hybrid integrated circuit, contained in a housing the exterior dimensions of which do not exceed 41×92 mm, with not more than 94 connections and bearing: 
-an identification marking consisting of or including one of the following combinations of figures: 
719 
904 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8543 80 8091Electromagnetic display consisting of 7 electromagnetic coils, which by means of the residual magnetism in the stators provide that the last indication remains available (set state), and 7 pivoting light-reflecting segments each of which is attached to a bar magnet. The display is contained in a housing the exterior dimensions of which do not exceed 28×36×50 mm0ex 8543 80 8094Amplifier with an isolation voltage of 1 500 V or more and with a leakage current not exceeding 0,5 mA, consisting of 2 capacitors and 2 monolithic integrated circuits on a printed circuit which is mounted on a plastic carrier, the whole contained in a housing the exterior dimensions of which do not exceed 8×21 mm, with not more than 8 connections and bearing: 
-an identification marking consisting of or including the following combination of figures and letters: 
ISO 122 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8543 80 8095Speech reproducing module, consisting of a printed circuit on which are mounted: 
-a synthesizer, in the form of a monolithic integrated circuit and contained in a housing, 
-a piëzo-electric or magnetic loudspeaker, 
-two or three supply batteries, a switch, three capacitors, 
and whether or not incorporating: 
-either a read only memory, non-programmable (ROM) with a storage capacity of 1 Mbit or an UV erasable, programmable, read only memory (EPROM) with a storage capacity of 128 Kbits, in the form of a monolithic integrated circuit and contained in a housing, 
the whole contained in a housing the exterior dimensions of which do not exceed 4×60×95 mm, with not more than 24 connections and bearing: 
-an identification marking consisting of or including the following combination of letters: 
SPMS 
or 
-other identification markings relating to devices complying with the abovementioned description0ex 8543 80 8096Digital image processor unit with a speed of 1 to 50 images per second, with a spatial resolution of 512×512 pixels or more and a radiometric resolution of 16 bits, comprising supply units and 11 printed circuits on which are mounted integrated circuits and other active and passive elements, the whole mounted in a frame, for use in the manufacture of cardiodiagnostic appparatus (a)0ex 8544 19 9010Insulated winding wire containing by weight 99,5 % or more of aluminium, neither laquered, varnished nor enamelled, with a total thickness of 0,15 mm or more but not exceeding 0,16 mm0ex 9001 10 10 
ex 9001 10 9010 
10Image reverser made up from an assembly of optical fibres0ex 9001 20 0010Material consisting of a polarizing film, supported on one or both sides by transparent material0ex 9001 90 9010Octagonal Fresnel lens of acrylic resin unmounted, for use in the manufacture of overhead projectors (a)0ex 9002 11 0010Adjustable lens unit, having a focal length of 90 mm or more but not exceeding 180 mm and comprising a combination of between 4 and 8 glass or methacrylic lenses with a diameter of 120 mm or more but not exceeding 180 mm, each lens coated on at least one side with a magnesium fluoride layer, for use in the manufacture of video projectors (a)0ex 9002 11 0020Lens unit, having a focal length of 90 mm or more but not exceeding 94 mm, consisting of glass or plastic lenses, with a diameter of 80 mm or more but not exceeding 90 mm0ex 9002 11 0030Lens unit, having a focal length of 86 mm or more but not exceeding 90 mm, consisting of glass or plastic lenses, with a diameter of 120 mm or more but not exceeding 180 mm0ex 9002 90 9110Optical mirror comprising an octagonal Fresnel lens, for use in the manufacture of overhead projectors (a)0ex 9013 80 1010Liquid crystal displays (LCDs) consisting of a layer of liquid crystals between 2 glass sheets or plates, with a 7 or more but not exceeding 120 figures or letters, whose exterior dimensions are: 
-18,5×52 mm, or 
-18,5×61 mm, or 
-22×52 mm, or 
-22×63 mm, or 
-27×61 mm, or 
-55,8×73,7 mm, 
with not more than 192 connections, for use in the manufacture of calculators (a)0ex 9021 30 9030Heart valves and parts thereof0ex 9021 90 1010Receivers for hearing aids, contained in a housing the exterior dimensions of which, excluding connecting points, do not exceed 5×6×8 mm0ex 9110 12 0091Assembly consisting of a printed circuit on which are mounted one quartz oscillator, at least one watch circuit and, wether or not integrated, at least one capacitor, of a thickness not exceeding 5 mm, for use in the manufacture of products falling within Chapter 91 (a)0ex 9110 90 00 
ex 9114 90 00 
92 
91 
Assembly consisting of a printed circuit on which is mounted a watch circuit or a watch circuit and a quartz oscillator, of a thickness not exceeding 5 mm, for use in the manufacture of products falling within Chapter 91 (a)0ex 9110 90 0093Assembly consisting of a printed circuit on which is mounted at least one watch circuit, a quartz oscillator and a piezo-electric sound element, with a thickness exceeding 5 mm, for the manufacture of products falling within Chapter 91 (a)0ex 9608 91 0010Non-fibrous plastic pen-tips with an internal channel0ex 9613 90 0020Piezo-electric ignition mechanism0(a) Control of the use for this special purpose shall be carried out pursuant to the relevant Community provisions.