21998D0119(02)

DECISION No 3/97 OF THE ASSOCIATION COUNCIL Association between the European Communities and their Member States, of the one part, and the Slovak Republic, of the other part of 22 December 1997 concerning the export of certain ECSC and EC steel products from Slovakia to the Community for the period 1 January to 31 December 1998 (renewal of the double-checking system) (98/74/EC)

THE ASSOCIATION COUNCIL,

Whereas the contact group referred to in Article 10 of Protocol 2 to the Europe Agreement establishing an association between the European Communities and their Member States, of the one part, and the Slovak Republic, of the other part, which entered into force on 1 February 1995, met on 23 October 1997 and agreed to recommend to the Association Council established under Article 104 of the Agreement that the double-checking system introduced in 1997 by Association Council Decision No 1/97 should be renewed for the period 1 January to 31 December 1998;

Whereas the Association Council, having been supplied with all relevant information, has agreed to this recommendation,

HAS DECIDED AS FOLLOWS:

Article 1

1. For the period 1 January to 31 December 1998, imports into the Community of the products listed in Annex I originating in Slovakia shall be subject to the presentation of a surveillance document conforming to the model shown in Annex II issued by the authorities in the Community.

2. The classification of the products covered by this Decision is based on the tariff and statistical nomenclature of the Community (hereinafter called the 'Combined Nomenclature`, or in, abbreviated form, 'CN`). The origin of the products covered by this Decision shall be determined in accordance with the rules in force in the Community.

3. For the period 1 January to 31 December 1998, imports into the Community of the iron and steel products listed in Annex I and which originate in Slovakia shall, in addition, be subject to the issue of an export document by the competent Slovak authorities. Presentation by the importer of the original of the export document must be effected not later than 31 March of the year following that in which the goods covered by the document were shipped. Shipment is considered to have taken place on the date of loading on the the exporting means of transport.

4. The export document shall conform to the model shown in Annex III. It shall be valid for exports throughout the customs territory of the Community.

5. The Slovak Republic shall notify the Commission of the European Communities of the names and addresses of the appropriate Slovak governmental authorities which are authorized to issue and verify export documents and shall send it specimens of the stamps and signatures they use. The Slovak Republic shall also notify the Commission of any change in these particulars.

6. Certain technical provisions on the implementation of the double-checking system are set out in Annex IV.

Article 2

1. The Slovak Republic undertakes to supply the Community with precise statistical information on the export documents issued by the Slovak authorities pursuant to Article 1. Such information shall be forwarded to the Community by the end of the month following the month to which the statistics relate.

2. The Community undertakes to supply the Slovak authorities with precise statistical information on surveillance documents issued by Member States in respect of the export documents issued by the Slovak authorities pursuant to Article 1. Such information shall be forwarded to the Slovak authorities by the end of the month following the month to which the statistics relate.

Article 3

If necessary, at the request of either of the Parties, consultations shall be held on any problems arising from the operation of this Decision. Such consultations shall be held promptly. Any consultations held under this Article shall be approached by both Parties in a spirit of cooperation and with a desire to reconcile the difference between them.

Article 4

Any notices to be given hereunder shall be given:

- in respect of the Community, to the Commission of the European Communities (DG I.D.2 and DG III.C.1),

- in respect of the Slovak Republic, to the Mission of the Slovak Republic to the European Communities and to the Ministry of Economy of the Slovak Republic.

Article 5

This Decision shall be binding on both the Community and the Slovak Republic which shall take the measures necessary to implement it.

Article 6

This Decision shall enter into force on the date of its adoption.

It shall apply with effect from 1 January 1998.

Done at Brussels, 22 December 1997.

For the Association Council

The President

J. POOS

ANNEX I

SLOVAKIA

List of products subject to double-checking (1998)

Hot-rolled coils and pickled coils

7208 10 00

7208 25 00

7208 26 00

7208 27 00

7208 36 00

7208 37 10

7208 37 90

7208 38 10

7208 38 90

7208 39 10

7208 39 90

7219 11 00

7219 12 10

7219 12 90

7219 13 10

7219 14 10

7219 14 90

7225 19 10

7225 20 20

7225 30 00

Cut lengths

7208 40 10

7208 40 90

7208 51 10

7208 51 99

7208 52 10

7208 52 99

7208 53 10

7208 53 90

7208 54 10

7208 54 90

7208 90 10

7208 90 90

Cold-rolled sheets and coils

7209 15 00

7209 16 90

7209 17 90

7209 18 91

7209 18 99

7209 25 00

7209 26 90

7209 27 90

7209 28 90

7209 90 10

7209 90 90

Hot-rolled strip and hoop

7211 14 10

7211 14 90

7211 19 20

7211 19 90

7212 60 91

7220 11 00

7220 12 00

7220 90 31

7226 19 10

7226 20 20

7226 91 10

7226 91 90

7226 93 20

7226 94 20

7226 99 20

Cold-rolled strip and hoop

7211 23 10

7211 23 51

7211 23 99

7211 29 20

7211 90 19

7211 90 90

7226 92 90

7226 93 80

7226 94 80

7226 99 80

Hot dip galvanized sheets, coils and strip

7210 11 90

7210 41 10

7210 41 90

7210 49 10

7210 49 90

7210 61 10

7212 30 90

Tinplate in coils, sheet and strip

7210 11 10

7210 12 11

7210 70 31

7210 70 39

7212 10 99

Non-oriented grain steel sheets, coils and strip for electrotechnics

7209 17 10

7209 27 10

7211 23 91

ANNEX II

>START OF GRAPHIC>

EUROPEAN COMMUNITY SURVEILLANCE DOCUMENT 1. Consignee (name, full address, country, VAT number) 2. Issue number 3. Proposed place and date of import 4. Authority responsible for issue (name, address and telephone No) 5. Declarant/representative as applicable (name and full address) 6. Country of origin (and geonomenclature code) 7. Country of consignment (and geonomenclature code) 8. Last day of validity 9. Description of goods 10. CN code and category 11. Quantity in kilograms (net mass) or in additional units 12. Value in ecus, cif at Community frontier 13. Additional remarks 14. Competent authority's endorsement Date: . Signature: . Stamp: 1 1 Original & Copy 15. ATTRIBUTIONS Indicate the quantity available in part 1 of column 17 and the quantity attributed in part 2 thereof. 16. Net quantity (net mass or other unit of measure stating the unit) 17. In figures 18. In words for the quantity attributed 19. Customs document (form and number) or extract No and date of attribution 20. Name, Member State, stamp and signature of the attributing authority 1 2 1 2 1 2 1 2 1 2 1 2 1 2 Extension pages to be attached hereto.

>END OF GRAPHIC>

>START OF GRAPHIC>

EUROPEAN COMMUNITY SURVEILLANCE DOCUMENT 1. Consignee (name, full address, country, VAT number) 2. Issue number 3. Proposed place and date of import 4. Authority responsible for issue (name, address and telephone No) 5. Declarant/representative as applicable (name and full address) 6. Country of origin (and geonomenclature code) 7. Country of consignment (and geonomenclature code) 8. Last day of validity 9. Description of goods 10. CN code and category 11. Quantity in kilograms (net mass) or in additional units 12. Value in ecus, cif at Community frontier 13. Additional remarks 14. Competent authority's endorsement Date: . Signature: . Stamp: 2 2 Copy for the issuing authority 15. ATTRIBUTIONS Indicate the quantity available in part 1 of column 17 and the quantity attributed in part 2 thereof. 16. Net quantity (net mass or other unit of measure stating the unit) 17. In figures 18. In words for the quantity attributed 19. Customs document (form and number) or extract No and date of attribution 20. Name, Member State, stamp and signature of the attributing authority 1 2 1 2 1 2 1 2 1 2 1 2 1 2 Extension pages to be attached hereto.

>END OF GRAPHIC>

ANNEX III

>START OF GRAPHIC>

(1) Show net weight (kg) and also quantity in the unit prescribed where other than net weight. (2) In the currency of the sale contract. 1 Exporter (name, full address, country) ORIGINAL 2 No 3 Year 4 Product group 5 Consignee (name, full address, country) EXPORT DOCUMENT (ECSC and EC steel products) 6 Country of origin 7 Country of destination 8 Place and date of shipment - Means of transport 9 Supplementary details 10 Description of goods - Manufacturer 11 CN code 12 Quantity (1) 13 FOB value (2) 14 CERTIFICATION BY THE COMPETENT AUTHORITY 15 Competent authority (name, full address, country) At . , on . (Signature) (Stamp)

>END OF GRAPHIC>

>START OF GRAPHIC>

(1) Show net weight (kg) and also quantity in the unit prescribed where other than net weight. (2) In the currency of the sale contract. 1 Exporter (name, full address, country) COPY 2 No 3 Year 4 Product group 5 Consignee (name, full address, country) EXPORT DOCUMENT (ECSC and EC steel products) 6 Country of origin 7 Country of destination 8 Place and date of shipment - Means of transport 9 Supplementary details 10 Description of goods - Manufacturer 11 CN code 12 Quantity (1) 13 FOB value (2) 14 CERTIFICATION BY THE COMPETENT AUTHORITY 15 Competent authority (name, full address, country) At . , on . (Signature) (Stamp)

>END OF GRAPHIC>

ANNEX IV

SLOVAKIA

Technical Annex on the double-checking system

1. The export documents shall measure 210 × 297 mm. The paper used shall be white writing paper, sized, not containing mechanical pulp, and weighing not less than 25 g/m². They shall be made out in English. If they are completed by hand, entries must be in ink and in printed script. These documents may comprise additional copies duly indicated as such. If the documents have several copies only the top copy is the original. This copy shall be clearly marked as 'original` and other copies as 'copies`. Only the original shall be accepted by the competent authorities of the Community as being valid for the control of export to the Community in accordance with the provisions of the double-checking system.

2. Each document shall bear a standardised serial number, whether or not printed, by which it can be identified. This number shall be composed of the following elements:

- two letters identifying the exporting country as follows: SK,

- two letters identifying the intended Member State of customs clearance as follows:

>TABLE>

- a one-digit number identifying the year, corresponding to the last figure in the respective year, e.g. 8 for 1998,

- a two-digit number from 01 to 99, identifying the particular issuing office concerned in the exporting country,

- a five-digit number running consecutively from 00001 to 99999 allocated to the intended Member State of customs clearance.

3. Products shall be shipped during the calendar year appearing in Box 3 of the export document.

4. Since the importer needs to present the original export document when requesting a surveillance document, export documents should, as far as possible, be issued in respect of individual commercial transactions, not global contracts.

5. The Slovak Republic need not show price information on the export document if there is a genuine need to protect commercial confidentiality. In such cases, Box 9 of the export document should indicate the reason for not showing the price information and that it is available to the competent authorities of the Community on request.

6. Export documents may be issued after the shipment of the products to which they relate. In such cases they must bear the endorsement 'issued retrospectively`.

7. In the event of a theft, loss or destruction of an export document, the exporter may apply to the competent governmental authority which issued the document for a duplicate to be made out on the basis of the export documents in his possession. The duplicate of any such document so issued shall bear the endorsement 'duplicate`. The duplicate shall bear the date of the original export document.

8. The competent authorities of the Community shall be informed immediately of the withdrawal or modification of any export documents already issued and, where relevant, of the basis for such action.