Back to EUR-Lex homepage

EUR-Lex Access to European Union law

Back to EUR-Lex homepage

This document is an excerpt from the EUR-Lex website

Use quotation marks to search for an "exact phrase". Append an asterisk (*) to a search term to find variations of it (transp*, 32019R*). Use a question mark (?) instead of a single character in your search term to find variations of it (ca?e finds case, cane, care).
Search tips
Need more search options? Use the Advanced search
You are here

Document 52020PC0156

Proposal for a COUNCIL REGULATION amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products

COM/2020/156 final

Brussels, 24.4.2020

COM(2020) 156 final

2020/0062(NLE)

Proposal for a

COUNCIL REGULATION

amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products


EXPLANATORY MEMORANDUM

1.CONTEXT OF THE PROPOSAL

•Reasons for and objectives of the proposal

In order to ensure sufficient and uninterrupted supplies of certain agricultural and industrial products which are insufficiently produced or not produced at all in the Union and to avoid any disturbances on the market for these products, some autonomous Common Customs Tariff duties have been partially or totally suspended by Council Regulation (EU) No 1387/2013 (hereinafter "the Regulation").

The Regulation is updated every six months to accommodate the needs of Union industry. The Commission, assisted by the Economic Tariff Questions Group, has reviewed all requests from the Member States for autonomous tariff suspensions.

Following this review, the Commission considers that the suspension of duties is justified for some new products, currently not listed in the Annex of the Regulation. In relation to some other products, it is necessary to modify the conditions in terms of product description, classification, duty rates, end-use requirement or date foreseen for mandatory review. Products for which a tariff suspension is no longer in the Union's economic interest are proposed to be withdrawn.

•Consistency with existing policy provisions in the policy area

This proposal does not affect countries that have a preferential trading agreement with the Union nor - candidate countries or potential candidates for preferential agreements with the Union (e.g. Generalised System of Preferences; the African, Caribbean and Pacific group trade regime; Free Trade Agreements).

•Consistency with other Union policies

The proposal is in line with Union policies in the area of agriculture, trade, enterprise, environment, development and external relations.

2.LEGAL BASIS, SUBSIDIARITY AND PROPORTIONALITY

•Legal basis

The legal basis of this proposal is Article 31 of the Treaty on the Functioning of the European Union (TFEU).

•Subsidiarity (for non-exclusive competence)

The proposal falls under the exclusive competence of the Union. The subsidiarity principle therefore does not apply.

•Proportionality

The proposal complies with the principle of proportionality. The measures envisaged are in line with the principles for simplifying procedures for operators engaged in foreign trade, as stated in the Commission communication concerning autonomous tariff suspensions and quotas 1 . This Regulation does not go beyond what is necessary to achieve the objectives pursued in accordance with Article 5(4) of the Treaty on European Union (TEU).

•Choice of the instrument

By virtue of Article 31 of the TFEU, "Common Customs Tariff duties shall be fixed by the Council on a proposal from the Commission". Therefore, a Council regulation is the appropriate instrument.

3.RESULTS OF EX-POST EVALUATIONS, STAKEHOLDER CONSULTATIONS AND IMPACT ASSESSMENTS

•Ex-post evaluations/fitness checks of existing legislation

The autonomous suspensions scheme was subject to an evaluation study carried out in 2013. The evaluation concluded that the core rationale for the scheme remains valid. The cost savings for EU businesses importing goods under the scheme can be significant. In turn, depending on the product, company and sector, these savings can have wider benefits, such as boosting competitiveness, making production methods more efficient, and creating or keeping jobs in the Union. Details of the savings of this regulation can be found in the attached legislative financial statement.

•Stakeholder consultations

The Economic Tariff Questions Group, which consists of delegations from all Member States plus Turkey, assisted the Commission to assess this proposal. The group met three times before agreeing the changes in this proposal.

It carefully assessed each request (new, an amendment or deletion). It particularly examined each case to ensure that it was not causing any harm to Union producers and was strengthening and consolidating the competitiveness of Union's production. The members of the Economic Tariff Questions Group carried out the assessment through discussions, and Member States consulted the concerned industries, associations, chambers of commerce and other stakeholders involved.

All listed tariff suspensions were the subject of agreements or compromises reached in the discussions held at the Economic Tariff Questions Group. No potentially serious risks with irreversible consequences were mentioned.

•Impact assessment

The proposed amendment is of a purely technical nature and concerns only the coverage of suspensions listed in the Annex to Council Regulation (EU) No 1387/2013. Therefore, no impact assessment was carried out for this proposal.

•Fundamental rights

The proposal has no consequences on fundamental rights.

4.BUDGETARY IMPLICATIONS

This proposal has no financial impact on expenditure, but has a financial impact on revenue. Uncollected customs duties total approximately EUR 7 million per year. The effect on the budget’s traditional own resources is EUR 5,6 million per year (i.e. 80 % of the total). The legislative financial statement sets out the budgetary implications of the proposal in greater detail.

The loss of revenue in traditional own resources shall be compensated by Member States Gross National Income (GNI) based on resource contributions.

5.OTHER ELEMENTS

•Implementation plans and monitoring, evaluation and reporting arrangements

The measures proposed are managed within the framework of the Integrated Tariff of the European Union (TARIC) and applied by customs administrations of the Member States.

2020/0062 (NLE)

Proposal for a

COUNCIL REGULATION

amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products

THE COUNCIL OF THE EUROPEAN UNION,

Having regard to the Treaty on the Functioning of the European Union, and in particular Article 31 thereof,

Having regard to the proposal from the European Commission,

Whereas:

(1)In order to ensure a sufficient and uninterrupted supply of certain agricultural and industrial products which are unavailable in the Union and thereby avoid any disturbances on the market for those products, the Common Customs Tariff (CCT) duties of the type referred to in Article 56(2)(c) of Regulation (EU) No 952/2013 of the European Parliament and of the Council laying down the Union Customs Code 2 (“CCT duties”) on those products have been suspended by Council Regulation (EU) No 1387/2013 3 . Those products can be imported into the Union at reduced or zero duty rates.

(2)The Union production of certain products that are not listed in the Annex to Regulation (EU) No 1387/2013 is inadequate or non-existent. It is therefore in the interest of the Union to suspend totally the CCT duties on those products.

(3)With a view to promoting integrated battery production in the Union and in accordance with the communication from the Commission of 17 May 2018 entitled ‘Europe on the Move — Sustainable Mobility for Europe: safe, connected, and clean’ 4 , a partial suspension of the CCT duties should be granted for certain products that are not listed in the Annex to Regulation (EU) No 1387/2013. In addition, only a partial suspension of the CCT duties should be granted in respect of certain products currently subject to complete suspensions. The date set for the mandatory review of those suspensions should be 31 December 2020 in order to allow for the review thereof having regard to the evolution of the battery sector in the Union.

(4)With regard to the candidate list referred to in Article 59 of Regulation (EC) No 1907/2006 of the European Parliament and of the Council 5 , only a partial suspension of the CCT duties should be granted for products that are included in that list. The date set for the mandatory review of those suspensions should be 31 December 2021 in order to allow economic operators to replace such products with alternatives.

(5)It is necessary to modify the product description, classification and end-use requirement for certain CCT duty suspensions listed in the Annex to Regulation (EU) No 1387/2013 in order to take into account technical product developments and economic trends on the market.

(6)It is no longer in the interest of the Union to maintain certain suspensions of CCT duties for certain products listed in the Annex to Regulation (EU) No 1387/2013. The suspensions for those products should therefore be withdrawn.

(7)Regulation (EU) No 1387/2013 should therefore be amended accordingly.

(8)In order to avoid any interruption of the application of the autonomous suspension scheme and to comply with the guidelines set out in the communication from the Commission of 13 December 2011 concerning autonomous tariff suspensions and quotas 6 , the changes provided for in this Regulation regarding the suspensions for the products concerned must apply from 1 July 2020. The Regulation should therefore enter into force as a matter of urgency,

HAS ADOPTED THIS REGULATION:

Article 1

The Annex to Regulation (EU) No 1387/2013 is amended in accordance with the Annex to this Regulation.

Article 2

This Regulation shall enter into force on the day following that of its publication in the Official Journal of the European Union.

It shall apply from 1 July 2020.

This Regulation shall be binding in its entirety and directly applicable in all Member States.

Done at Brussels,

   For the Council

   The President

LEGISLATIVE FINANCIAL STATEMENT

1.1. NAME OF THE PROPOSAL:

Council Regulation amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products

2.BUDGET LINES:

Chapter and Article: Chapter 12, Article 120

Amount budgeted for the year 2020: 22 156 900 000 €

3.FINANCIAL IMPACT

◻    Proposal has no financial implications

X Proposal has no financial impact on expenditure but has a financial impact on revenue -the effect is as follows:

(EUR million to one decimal place)

Budget line

Revenue

6 month period, starting dd/mm/yyyy

[Year: second half of 2020]

Article 120

Impact on own resources

01/07/2020

-2,8

Situation following action

[2020 – 2024]

Article 120

-5,6/ year

Annex III contains 61 new products. The uncollected duties corresponding to these suspensions, calculated on the basis of requesting Member State projections for the period 2020 to 2024, amount to EUR 6 million per year.

On the basis of the existing statistics for preceding years, it would appear, however, necessary to increase this amount by an average factor, estimated at 1,8 to take account of imports into other Member States using the same suspensions. This means uncollected duties of some EUR 10,8 million per year.

The zero duty rate for five existing suspensions was increased. This represents an increase of EUR 0,6 million per year in the collection of duties, as estimated on the basis of 2019 statistics.

19 products have been withdrawn from this Annex reflecting the reintroduction of customs duties. This represents an increase of EUR 3,2 million per year in the collection of duties, as estimated on the basis of 2019 statistics.

On the basis of the above, the impact on the loss of revenue for the EU budget resulting from this Regulation is estimated at 10,8 – 3,2 – 0,6 = EUR 7 million (gross amount, including collection costs) x 0,8 = EUR 5,6 million per year for the period 01.07.2020 - 31.12.2024.

4.ANTI-FRAUD MEASURES

Checks on the end-use of some of the products covered by this Council Regulation will be carried out in accordance with Article 254 of Regulation (EU) No 952/2013 of the European Parliament and of the Council of 9 October 2013 laying down the Union Customs Code.

(1)    OJ C 363, 13.12.2011, p. 6.
(2)    Regulation (EU) No 952/2013 of the European Parliament and of the Council of 9 October 2013 laying down the Union Customs Code (OJ L 269, 10.10.2013, p. 1).
(3)    Council Regulation (EU) No 1387/2013 of 17 December 2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products and repealing Regulation (EU) No 1344/2011 (OJ L 354, 28.12.2013, p. 201).
(4)    COM(2018) 293 final.
(5)    Regulation (EC) No 1907/2006 of the European Parliament and of the Council of 18 December 2006 concerning the Registration, Evaluation, Authorisation and Restriction of chemicals (REACH), establishing a European Chemicals Agency, amending Directive 1999/4/EC and repealing Council Regulation (EEC) No 793/93 and Commission Regulation (EC) No 1488/94 as well as Council Directive 76/769/EEC and Commission Directives 91/155/EEC, 93/67/EEC and 2000/21EC (OJ L 396, 30.12.2006, p. 1).
(6)    OJ C 363, 13.12.2011, p. 6.
Top

Brussels, 24.4.2020

COM(2020) 156 final

ANNEX

to the

Proposal for a COUNCIL REGULATION

amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products


ANNEX

The Annex to Regulation (EU) No 1387/2013 is amended as follows:

(1)    all asterisks and the endnote (*), containing the text ‘A newly introduced measure or a measure with amended conditions. Where more than one CN code is listed as falling within the scope of the measure, the asterisk concerns the entire measure. ’, are deleted;

(2)    the rows having the following serial numbers are deleted:

Serial Number

0.2706

0.2972

0.3650

0.3886

0.3894

0.3895

0.4004

0.4039

0.4177

0.4647

0.4648

0.4751

0.5504

0.5615

0.5929

0.6601

0.6745

0.7784

0.7803

;

(3)    the rows set out in the table below replace those in the Annex to Regulation (EU) No 1387/2013 having the same serial numbers:

Serial number

CN code

TARIC

Description

Rate of autonomous duty

Supplementary Unit

Date foreseen for mandatory review

0.7288

ex 2841 50 00

11

Potassium dichromate (CAS RN 7778-50-9) with a purity by weight of 99 % or more

2 %

-

31.12.2021

0.3419

ex 2850 00 20

80

Arsine (CAS RN 7784-42-1) with a purity by volume of 99,999 % or more

0 %

-

31.12.2024

0.2583

ex 2903 89 80

45

1,6,7,8,9,14,15,16,17,17,18,18-Dodecachloropentacyclo [12.2.1.16,9.02,13.05,10]octadeca-7,15-diene (CAS RN 13560-89-9) with purity by weight of 99 % or more

2 %

-

31.12.2021

0.2942

ex 2919 90 00

35

2,2'-Methylenebis(4,6-di-tert-butylphenyl) phosphate, monosodium salt (CAS RN 85209-91-2) with a purity by weight of 95 % or more, with particles greater than 100µm used in the manufacture of nucleating agents with a particle size (D90) no greater than 35 µm as measured by a light scattering technique

 (2)

0 %

-

31.12.2023

0.5037

ex 2922 49 85

17

Glycine (CAS RN 56-40-6) with a purity by weight of 95 % or more, whether or not with not more than 5 % addition of anti-caking agent silicon dioxide (CAS RN 112926-00-8)

0 %

-

31.12.2020

0.3689

ex 2924 19 00

23

Acrylamide (CAS RN 79-06-1) with a purity by weight of 97 % or more

2 %

-

31.12.2021

0.6259

ex 2926 90 70

26

Cyfluthrin (ISO) (CAS RN 68359-37-5) with a purity by weight of 95,5 % or more for the use in the manufacture of biocidal products

 (2)

0 %

-

31.12.2024

0.2656

ex 2931 39 90

38

N-(Phosphonomethyl)iminodiacetic acid (CAS RN 5994-61-6) containing by weight not more than 15 % of water, and with a dry weight purity of 97 % or more

0 %

-

31.12.2024

0.7811

ex 2933 19 90

33

Fipronil (ISO) (CAS RN 120068-37-3) with a purity by weight of 95 % or more for the use in the manufacture of veterinary medicine

 (2)

0 %

-

31.12.2024

0.4346

ex 2934 20 80

25

1,2-Benzisothiazol-3(2H)-one (CAS RN 2634-33-5) in the form of a powder with a purity by weight of 95 % or more, or in an aqueous mixture containing by weight 20 % or more of 1,2-benzisothiazol-3(2H)-one

0 %

-

31.12.2022

0.5134

ex 3204 11 00

45

Preparation of dispersion dyes, containing:

—

C.I. Disperse Orange 61 (CAS RN 12270-45-0) or Disperse Orange 288 (CAS RN 96662-24-7),

—

C.I. Disperse Blue 291:1 (CAS RN 872142-01-3),

—

C.I. Disperse Violet 93:1 (CAS RN 122463-28-9),

—

whether or not containing C.I. Disperse Red 54 (CAS RN 6657-37-0)

0 %

-

31.12.2020

0.7318

ex 3603 00 60

10

Igniters for gas generators with an overall maximum length of 20,34mm or more but not more than 29,4 mm and a pin length of 6,68 mm (± 0,3 mm) or more but not more than 7,54 mm (± 0,3 mm)

0 %

-

31.12.2022

0.5718

ex 3811 21 00

85

Additives:

—

containing more than 20 % or more but not more than 45 % by weight of mineral oils,

—

based on a mixture of branched dodecylphenol sulfide calcium salts, whether or not carbonated,

for use in the manufacture of blends of additives

 (2)

0 %

-

31.12.2022

0.7512

ex 3811 29 00

18

Additive consisting of dihydroxy butanedioic acid - (mixed C12-16-alkyl and C13-rich C11-14-isoalkyl) diester, for use in the manufacture of engine oils

 (2)

0 %

-

31.12.2023

0.3069

ex 3824 99 92

88

2,4,7,9-Tetramethyldec-5-yne-4,7-diol, hydroxyethylated (CAS RN 9014-85-1)

0 %

-

31.12.2020

0.4719

ex 3824 99 93

35

Paraffin with a level of chlorination of 70 % or more (CAS RN 63449-39-8)

0 %

-

31.12.2024

0.6953

ex 3901 40 00

20

Octene linear low-density polyethylene (LLDPE) in the form of pellets with:

—

10 % or more but not more than 20 % by weight of octene,

—

a melt flow ratio of 9,0 or more, but not more than 10,0 (using ASTM D1238 10.0/2.16),

—

a melt index (190°C/2.16 kg) of 0,4 g / 10 min or more but not more than 0,6 g / 10 min,

—

a density of 0,909 g/cm³ or more, but not more than 0,913 g/cm³ using ASTM D4703,

—

a gel area per 24,6 cm³ of not more than 20 mm², and

—

an anti-oxidant level of not more than 240 ppm

0 %

m³

31.12.2020

0.5161

ex 3919 10 80

ex 3919 90 80

70

75

Rolls of polyethylene foil:

—

self-adhesive on one side,

—

of a total thickness of 0,025 mm or more, but not more than 0,09 mm,

—

of a total width of 60 mm or more, but not more than 1 110 mm,

for use in the manufacture of products of headings 8521 or 8528 for the protection purposes

 (2)

0 %

-

31.12.2021

0.4947

ex 3919 90 80

65

Self-adhesive film with a thickness of 40 µm or more, but not more than 475 µm, consisting of one or more layers of transparent, metallized or dyed poly(ethylene terephthalate), covered on one side with a scratch resistant coating and on the other side with a pressure sensitive adhesive and a release liner

0 %

-

31.12.2024

0.3241

ex 3920 10 25

30

Mono-layered High-Density Polyethylene film:

—

containing by weight 99 % or more of polyethylene,

—

with a thickness of 12 μm or more but not more than 20 μm,

—

with a length of 4000 m or more but not more than 7000 m,

—

with a width of 600 mm or more but not more than 900 mm

0 %

-

31.12.2023

0.3312

ex 3921 90 60

35

Ion-exchange membranes based on a fabric coated on both sides with fluorinated plastic material, for use in chlor-alkali electrolytic cells

 (2)

0 %

-

31.12.2023

0.6708

ex 4009 42 00

20

Rubber brake hose with:

—

textile strings,

—

a wallet thickness of 3,2 mm,

—

a metal hollow terminal pressed on both ends, and

—

one or more mounting brackets,

for use in the manufacture of goods of chapter 87

 (2)

0 %

-

31.12.2024

0.7372

ex 5311 00 90

10

Plain-woven fabric of paper yarns glued on a tissue paper layer:

—

with a weight of 190 g/m2 or more but not more than 280 g/m2, and

—

cut into rectangles with a side length of 40 cm or more but not more than 140 cm

0 %

-

31.12.2022

0.2546

ex 6903 90 90

30

Silicon carbide reactor tubes and holders having a softening point of 1 400 °C or higher

0 %

-

31.12.2023

0.7619

ex 7006 00 90

40

Plates of sodalime glass of STN (Super Twisted Nematic) quality having:

—

a length of 300 mm or more but not more than 1 500 mm,

—

a width of 300 mm or more but not more than 1 500 mm,

—

a thickness of 0,5 mm or more but not more than 1,1 mm,

—

an indium-tin-oxide coating with a resistance of 80 Ohms or more, but not more than 160 Ohms on one side,

—

with or without a multi layer anti-reflection-coating on the other side and machined (chamfered) edges

0 %

-

31.12.2023

0.7341

ex 7413 00 00

20

Loudspeaker centering ring, consisting of one or more vibration dampers and minimum 2 non-insulated copper cables, therein woven or pressed

0 %

-

31.12.2022

0.3928

ex 7616 99 90

15

Honeycomb aluminium blocks for use in the manufacture of aircraft parts

 (2)

0 %

p/st

31.12.2023

0.6730

ex 8101 96 00

10

Tungsten wire containing by weight 99 % or more of tungsten with:

—

a maximum cross-sectional dimension of not more than 50 µm

—

a resistance of 40 Ohm or more but not more than 300 Ohm at length of 1 metre

0 %

-

31.12.2020

0.5838

ex 8105 90 00

10

Bars or wires made of cobalt alloy containing, by weight:

—

35 % (± 2 %) cobalt,

—

25 % (± 1 %) nickel,

—

19 % (± 1 %) chromium and

—

7 % (± 2 %) iron,

conforming to the material specifications AMS 5842

0 %

-

31.12.2023

0.5570

ex 8207 30 10

10

Set of transfer and/or tandem press tools for cold-forming, pressing, drawing, cutting, punching, bending, calibrating, bordering and throating of metal sheets, for use in the manufacture of frame parts or body parts of motor vehicles

 (2)

0 %

p/st

31.12.2022

0.5024

ex 8301 60 00

ex 8419 90 85

ex 8479 90 70

ex 8481 90 00

ex 8503 00 99

ex 8515 90 80

ex 8537 10 98

ex 8538 90 99

ex 8708 99 10

ex 8708 99 97

30

40

30

50

43

40

55

70

55

22

Silicone or plastic keyboards, comprising:

—

parts of common metal, and

—

whether or not comprising parts of plastic,

—

epoxy resin reinforced with fiberglass or wood,

—

whether or not printed or surface-treated,

—

with or without electrical conductors

—

with or without a membrane bonded to the keyboard,

—

with or without mono or multilayer protective film

0 %

p/st

31.12.2020

0.7670

ex 8409 91 00

25

Air intake module for engine cylinders consisting of:

—

a suction pipe,

—

a pressure sensor,

—

an electric throttle,

—

hoses,

—

brackets,

for use in the manufacture of engines of motor vehicles

 (2)

0 %

-

31.12.2023

0.7718

ex 8409 99 00

75

High pressure fuel rail of galvanized ferrite-pearlite steel with:

—

at least one pressure sensor and one valve,

—

a length of 314 mm or more but not more than 322 mm,

—

an operating pressure not more than 225 MPa,

—

an inlet temperature not more than 95°C,

—

ambient temperature of -45°C or more but not more than 145°C,

for use in the manufacture of compression ignition engines of motor vehicles

 (2)

0 %

-

31.12.2024

0.7377

ex 8481 80 59

40

Flow-control valve:

—

made of steel,

—

with an outlet hole with a diameter of at least 0,05 mm, but not more than 0,5 mm,

—

with an inlet hole with a diameter of at least 0,1 mm, but not more than 1,3 mm,

—

with chromium nitride coating,

—

with a surface roughness of Rp 0,4

0 %

-

31.12.2022

0.7381

ex 8481 80 59

50

Electromagnetic valve for quantity control with:

—

a plunger,

—

a solenoid with a of coil resistance of at least 1,85 Ohm, but not more than 8,2 Ohm

0 %

-

31.12.2022

0.7604

ex 8484 20 00

20

Mechanical face sealing device made of two movable rings (one ceramic mating, having a thermal conductivity lower than 80W/Mk and the other carbon sliding), one spring and a nitrile sealant on the external side

0 %

-

31.12.2023

0.5577

ex 8501 31 00

50

DC motors, brushless, with: 

—

an external diameter of 80 mm or more, but not more than 200 mm,

—

a supply voltage of 9 V or more, but not more than 16 V,

—

an output at 20 °C of 300 W or more, but not more than 750 W,

—

a torque at 20 °C of 2,00 Nm or more, but not more than 7,00 Nm,

—

a rated speed at 20 °C of 600 rpm or more, but not more than 3 100 rpm,

—

with or without the rotor angle position sensor of resolver type or Hall effect type,

—

with or without the pulley,

of the kind used in power steering systems for cars

0 %

-

31.12.2022

0.4855

ex 8501 33 00

ex 8501 40 80

ex 8501 53 50

30

50

10

Electric drive for motor vehicles, with an output of not more than 315 kW:

—

with an AC or DC motor whether or not with transmission,

—

with or without power electronics

0 %

-

31.12.2021

0.5783

ex 8503 00 99

40

Fuel cell membrane, in rolls or sheets, with a width of not more than 150 cm, 

for use in the manufacture of fuel cells in heading 8501

 (2)

0 %

p/st

31.12.2022

0.7029

ex 8505 11 00

47

Articles in the form of a triangle, square or rectangle, whether or not arched or with rounded corners intended to become permanent magnets after magnetization, containing neodymium, iron and boron, with dimensions:

—

a length of 9 mm or more but not more than 105 mm,

—

a width of 5 mm or more but not more than 105 mm, and

—

a height of 2 mm or more but not more than 55 mm

0 %

-

31.12.2021

0.7511

ex 8505 19 90

60

Article of agglomerated ferrite in the shape of a half-sleeve or a quarter-sleeve, or with rounded corners, to become a permanent magnet after magnetization

—

of a length of 10 mm or more but not more than 100 mm (± 1 mm),

—

of a width of 10 mm or more but not more than 100 mm (± 1 mm),

—

of a thickness of 2 mm or more but not more than 15 mm (± 0,15 mm)

0 %

-

31.12.2023

0.6703

ex 8507 60 00

33

Lithium-ion accumulator, with:

—

a length of 150 mm or more, but not more than 1,000 mm,

—

a width of 100 mm or more, but not more than 1,000 mm,

—

a height of 200 mm or more, but not more than 1,500 mm,

—

a weight of 75 kg or more, but not more than 200 kg,

—

a nominal capacity not less than 150Ah and not more than 500 Ah,

—

a nominal output voltage of 230V AC (Line to neutral) or a nominal voltage of 64V (+/-10 %)

1.3 %

-

31.12.2020

0.6702

ex 8507 60 00

37

Lithium-ion accumulator, with:

—

a length of 1 200 mm or more, but not more than 2 000 mm,

—

a width of 800 mm or more, but not more than 1 300 mm,

—

a height of 2 000 mm or more, but not more than 2 800 mm,

—

a weight of 1 800 kg or more, but not more than 3 000 kg,

—

a nominal capacity of 2 800 Ah or more but not more than 7 200 Ah

1.3 %

-

31.12.2020

0.5342

ex 8507 60 00

65

Cylindrical lithium ion cell with

—

3,5 VDC to 3,8 VDC,

—

300 mAh to 900 mAh, and

—

a diameter of 10,0 mm to 14,5 mm

1.3 %

-

31.12.2021

0.6753

ex 8507 60 00

77

Lithium-ion rechargeable batteries, with:

—

a length of 700 mm or more, but not more than 2 820 mm,

—

a width of 935 mm or more, but not more than 1 660 mm,

—

a height of 85 mm or more, but not more than 700 mm,

—

a weight of 250 kgor more, but not more than 700 kg,

—

a power of not more than 175 kWh,

—

a nominal voltage of 400 V

1.3 %

-

31.12.2020

0.6863

ex 8512 30 90

20

Warning buzzer for parking sensor system in a plastic casing operating on the piezo-mechanic principle, containing:

—

a printed circuit board,

—

a connector,

—

whether or not a metal holder,

for use in the manufacture of goods of chapter 87

 (2)

0 %

p/st

31.12.2020

0.6689

ex 8529 90 65

28

Electronic assembly comprising at least

—

a printed circuit board with,

—

processors for multi-media applications and video signal processing,

—

FPGA (Field Programmable Gate Array),

—

Flash memory,

—

operating memory,

—

with or without USB, HDMI, VGA- and RJ-45 interfaces,

—

sockets and plugs for connecting a LCD-display, a LED lighting and a control panel

0 %

p/st

31.12.2020

0.7251

ex 8537 10 91

70

Programmable motor memory controller for a voltage not exceeding 1 000 V, comprising at least:

—

a printed circuit with active and passive components,

—

an aluminium housing, and

—

multiple connectors

0 %

p/st

31.12.2022

0.6866

ex 8538 90 91

ex 8538 90 99

20

50

Interior antenna for a car door locking system, comprising:

—

an antenna module in a plastic housing,

—

a connection cable with a plug,

—

at least two mounting brackets,

—

whether or not PCB including integrated circuits, diodes and transistors,

for use in the manufacture of goods of Chapter 87

 (2)

0 %

p/st

31.12.2020

0.5953

ex 8538 90 99

95

Copper base plate, containing more components than Insulated Gate Bipolar Transistor (IGBT) chips and diodes with a voltage of 650 V or more but not more than 1 200 V, for use as a heatsink in the manufacture of IGBT modules

 (2)

0 %

p/st

31.12.2023

0.6710

ex 8544 30 00

ex 8544 42 90

60

50

Four-core connecting cable containing two female connectors for the transmission of digital signals from navigation and audio systems to a USB connector, for use in the manufacture of goods of Chapter 87

 (2)

0 %

-

31.12.2020

0.6867

ex 8544 30 00

85

Extension two-core cable with two connectors, containing at least:

—

a rubber grommet,

—

a metal attachment bracket

of a kind used to connect vehicle speed sensors in the manufacture of vehicles of Chapter 87

0 %

p/st

31.12.2020

0.5002

ex 8545 90 90

40

Corrosion resistant, layered technical fibre substrate of a gas diffuser layer with:

—

controlled fibre length, flex strength, porosity, thermal conductance, electrical resistance,

—

a thickness of less than 600 µm,

—

a weight of less than 500 g/m2

0 %

m2

31.12.2020

0.7581

ex 8708 50 20

ex 8708 50 99

ex 8708 99 10

ex 8708 99 97

60

15

45

65

Car transfer case with single input, dual output, to distribute torque between front and rear axles in an aluminium housing, with dimension of not more than 565 × 570 × 510 mm, comprising:

—

at least an actuator,

—

whether or not an interior distribution by chain

0 %

-

31.12.2024

0.6711

ex 8708 80 20

ex 8708 80 35

10

10

Upper strut insulator containing:

—

a metal holder with three mounting screws, and 

—

a rubber bump,

for use in the manufacture of goods of Chapter 87

 (2)

0 %

p/st

31.12.2020

0.6705

ex 8708 80 20

ex 8708 80 91

20

10

Rear chassis arm with a protective plastic label equipped with two metal casings with pressed-in rubber silent blocks, for use in the manufacture of goods of Chapter 87

 (2)

0 %

p/st

31.12.2020

0.6704

ex 8708 80 20

ex 8708 80 91

30

20

Rear chassis arm equipped with a ball pivot and metal casing with a pressed-in rubber silent block, for use in the manufacture of goods of Chapter 87

 (2)

0 %

p/st

31.12.2020

0.7365

ex 8708 80 99

30

Surface-hardened, steel piston rod for a hydraulic or hydropneumatic shock absorber of motor vehicles:

—

with a chrome coating,

—

of a diameter of 11 mm or more, but not more than 28 mm,

—

of a length of 80 mm or more, but not more than 600 mm,

with a threaded end or a mandrel for resistance welding

0 %

-

31.12.2022

0.6687

ex 8708 95 10

ex 8708 95 99

10

20

Inflatable safety cushion of high strength polyamide fibre:

—

sewn,

—

folded into three-dimensional packing form, fixed by thermal forming, or flat (unfolded) safety cushion with or without thermal forming

0 %

p/st

31.12.2020

0.6686

ex 8714 10 90

10

Motorcycle fork rod inner tubes:

—

of SAE1541 carbon steel,

—

with a hard chromium layer of 20 μm (+ 15 μm/ – 5 μm),

—

having a wall thickness of 1,3 mm or more, but not more than 1,6 mm,

—

having an elongation at break of 15 %,

—

perforated

0 %

p/st

31.12.2020

0.5692

ex 9002 11 00

20

Lenses:

—

measuring not more than 95 mm × 55 mm × 50 mm,

—

with a resolution of 160 lines/mm or better, and

—

with a zoom ratio of 18 times

0 %

-

31.12.2022

0.6527

ex 9029 20 31

ex 9029 90 00

20

30

Clustered instrument panel with the microprocessor control board, with or without stepping motors, LED indicators or LCD display showing at least:

—

speed,

—

engine revolutions,

—

engine temperature,

—

the fuel level,

communicating via CAN-BUS and/or K-LINE protocols , of a kind used in the manufacture of goods of Chapter 87

0 %

p/st

31.12.2024

0.5025

ex 9401 90 80

10

Ratchet disk for use in the manufacture of reclining car seats

 (2)

0 %

p/st

31.12.2020

(2)

Suspension of duties is subject to end-use customs supervision in accordance with Article 254 of Regulation (EU) No 952/2013 of the European Parliament and of the Council of 9 October 2013 laying down the Union Customs Code (OJ L 269, 10.10.2013, p. 1)

;

(4)    the following rows are added or inserted according to the order of the first CN and TARIC codes of the corresponding measure indicated in the second and third column, respectively:

Serial number

CN code

TARIC

Description

Rate of autonomous duty

Supplementary Unit

Date foreseen for mandatory review

0.7897

2825 20 00

10

Lithium hydroxide monohydrate (CAS RN 1310-66-3)

2.6 %

-

31.12.2020

0.7895

2903 72 00

10

Dichloro-1,1,1-trifluoroethane (CAS RN 306-83-2) with a purity by weight of 99 % or more

0 %

-

31.12.2024

0.7826

2903 79 30

30

1-Bromo-5-chloropentane (CAS RN 54512-75-3) with a purity by weight of  99 % or more

0 %

-

31.12.2024

0.7914

2905 39 95

70

2-methylpropane-1,3-diol (CAS RN 2163-42-0) with a purity by weight of 98 % or more

0 %

-

31.12.2024

0.7828

2909 30 38

50

2-(1-Adamantyl)-4-Bromoanisole (CAS RN 104224-63-7) with a purity by weight of 99 % or more

0 %

-

31.12.2024

0.7846

2909 50 00

40

2-methoxy-4-(trifluoromethoxy)phenol (CAS RN 166312-49-8) with a purity by weight of 98 % or more

0 %

-

31.12.2024

0.7910

2909 60 00

50

Solution of 3,6,9-(ethyl and/or propyl)-3,6,9-trimethyl-1,2,4,5,7,8-hexoxonanes (CAS RN 1613243-54-1) in mineral spirits (CAS RN 1174522-09-8), containing by weight 25 % or more, but not more than 41 % of the hexoxonanes

0 %

-

31.12.2024

0.7824

2914 50 00

15

1,1-dimethoxyacetone (CAS RN 6342-56-9) with a purity by weight of  98 % or more

0 %

-

31.12.2024

0.7834

2915 40 00

10

Ethyl trichloroacetate (CAS RN 515-84-4) with a purity by weight of 98 % or more

0 %

-

31.12.2024

0.7830

2915 40 00

20

Sodium trichloroacetate (CAS RN 650-51-1) with a purity by weight of 96 % or more

0 %

-

31.12.2024

0.7899

2915 90 70

18

Myristitic acid, lithium salt (CAS RN 20336-96-3) with a purity by weight of 95 % or more

0 %

-

31.12.2024

0.7827

2916 39 90

27

Methyl 6-Bromo-2-naphthoate (CAS RN 33626-98-1) with a purity by weight of 99 % or more

0 %

-

31.12.2024

0.7845

2916 39 90

22

6-bromo-2-fluoro-3-(trifluoromethyl)benzoic acid (CAS RN 1026962-68-4) with a purity by weight of 95 % or more

0 %

-

31.12.2024

0.7880

2917 19 80

45

Iron fumarate (CAS RN 141-01-5) with a purity by weight of 93 % or more

0 %

-

31.12.2024

0.7907

2918 19 98

50

12-Hydroxyoctadecanoic acid (CAS RN 106-14-9) with a purity of 90 % or more for the manufacture of polyglycerin-poly-12-hydroxyoctadecanoic acid esters

 (2)

0 %

-

31.12.2024

0.7864

2918 30 00

35

3-Oxocyclobutane-1-carboxylic acid with a purity by weight of 98 % or more (CAS RN  23761-23-1)

0 %

-

31.12.2024

0.7898

2920 29 00

80

2,4,8,10-tetrakis(1,1-dimethylethyl)-6-(2-ethylhexyloxy)-12H dibenzo[d,g][1,3,2]dioxaphosphocin (CAS RN 126050-54-2) with a content of 95 % or more by weight (CAS RN 126050-54-2)

0 %

-

31.12.2024

0.7894

2921 51 90

10

N-(4-Chlorophenyl)benzene-1,2-diamine (CAS RN 68817-71-0) with a purity by weight of 97 % or more

0 %

-

31.12.2024

0.7860

2922 19 00

15

Aqueous solution, containing by weight:

—

73 % or more 2-amino-2-methyl-1-propanol (CAS RN 124-68-5),

—

4,5 % or more, but not more than 27 % water (CAS RN 7732-18-5)

0 %

-

31.12.2024

0.7853

2922 49 85

13

O-Benzylglycine p-toluenesulphonate (CAS RN 1738-76-7), with a purity by weight of 93 % or more

0 %

-

31.12.2024

0.7879

2923 90 00

50

Betaine hydrochloride (CAS RN 590-46-5), with a purity by weight of 93 % or more

0 %

-

31.12.2024

0.7841

2924 29 70

47

(S)-tert-butyl (1-amino-3-(4-iodophenyl)-1-oxopropan-2-yl)carbamate (CAS RN 868694-44-4) with a purity by weight of 95 % or more

0 %

-

31.12.2024

0.7832

2925 29 00

50

(Chloromethylene)dimethyliminium chloride (CAS RN 3724-43-4) with a purity by weight of 95 % or more

0 %

-

31.12.2024

0.7833

2930 90 98

31

(p-toluenesulphonyl)methyl isocyanide (CAS RN 36635-61-7) with a purity by weight of 98 % or more

0 %

-

31.12.2024

0.7859

2930 90 98

29

4-amino-5-(ethylsulfanyl)-2-methoxybenzoic acid (CAS RN 71675-86-0) with a purity by weight of 98 % or more

0 %

-

31.12.2024

0.7838

2932 20 90

53

(R)-4-propyldihydrofuran-2(3H)-one (CAS RN 63095-51-2) with a purity by weight of 98 % or more

0 %

-

31.12.2024

0.7855

2932 99 00

37

4-(2-butyl-1-benzofuran-3-carbonyl)-2,6-diiodophenol (CAS RN 1951-26-4) with a purity by weight of 99 % or more

0 %

-

31.12.2024

0.7903

2933 19 90

13

3-(Difluoromethyl)-5-fluoro-1-methyl-1H-pyrazole-4-carbonyl fluoride (CAS RN 1255735-07-9) with a purity by weight of 95 % or more

0 %

-

31.12.2024

0.7918

2933 19 90

23

Fluindapyr (ISO) (CAS RN 1383809-87-7) with a purity by weight of 96 % or more

0 %

-

31.12.2024

0.7835

2933 19 90

17

1,3-dimethyl-1H-pyrazole (CAS RN 694-48-4) with a purity by weight of 98 % or more

0 %

-

31.12.2024

0.7836

2933 19 90

27

3-(3,3,3-trifluoro-2,2-dimethylpropoxy)-1H-pyrazole-4-carboxylic acid (CAS RN 2229861-20-3) with a purity by weight of 95 % or more

0 %

-

31.12.2024

0.7844

2933 39 99

74

4-Aminopyridine-2-carboxamide (CAS RN 100137-47-1) with a purity by weight of 98 % or more

0 %

-

31.12.2024

0.7906

2933 39 99

81

4-Hydroxy-3-pyridinesulphonic acid (CAS RN 51498-37-4) with a purity by weight of 98 % or more

0 %

-

31.12.2024

0.7866

2933 39 99

82

Picloram (ISO) (CAS RN 1918-02-1) containing by weight not more than 15 % of water and with a dry weight purity of 92 % or more

0 %

-

31.12.2024

0.7825

2933 59 95

68

Guanine (CAS RN 73-40-5) with a purity by weight of 99 % or more

0 %

-

31.12.2024

0.7839

2933 99 80

66

(6-(4-fluorobenzyl)-3,3-dimethyl-2,3-dihydro-1H-pyrrolo[3,2-b]pyrid-5-yl)methanol (CAS RN 1799327-42-6) with a purity by weight of 98 % or more

0 %

-

31.12.2024

0.7843

2934 99 90

17

(S)-4-(tert-butoxycarbonyl)-1,4-oxazepane-2-carboxylic acid (CAS RN 1273567-44-4) with a purity by weight of 95 % or more

0 %

-

31.12.2024

0.7842

2934 99 90

69

3-methyl-5-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)benzo[d]oxazol-2(3H)-one (CAS RN 1220696-32-1) with a purity by weight of 95 % or more

0 %

-

31.12.2024

0.7837

2934 99 90

29

(2R,5S)-tert-butyl 4-benzyl-2-methyl-5-(((R)-3-methylmorpholino)methyl)piperazine-1-carboxylate (CAS RN 1403902-77-1) with a purity by weight of 98 % or more

0 %

-

31.12.2024

0.7840

2934 99 90

33

(2R,3R,5R)-5-(4-amino-2-oxopyrimidin-1(2H)-yl)-2-((benzoyloxy)methyl)-4,4-difluorotetrahydrofuran-3-yl benzoate (CAS RN 134790-39-9) with a purity by weight of 98 % or more

0 %

-

31.12.2024

0.7854

2935 90 90

70

(4S)-4-hydroxy-2-(3-methoxypropyl)-3,4-dihydro-2H-thieno[3,2-e]thiazine-6-sulfonamide-1,1-dioxide (CAS RN 154127-42-1) with a purity by weight of 97 % or more

0 %

-

31.12.2024

0.7885

3204 15 00

20

Colourant C.I. Vat Blue 1 (CAS RN 482-89-3) and preparations based thereon with a colourant C.I. Vat Blue 1 content of 94 % or more by weight

0 %

-

31.12.2024

0.7922

3823 19 10

20

12-Hydroxyoctadecanoic acid (CAS RN 106-14-9) for the manufacture of polyglycerin-poly-12-hydroxyoctadecanoic acid esters

 (2)

0 %

-

31.12.2024

0.7831

3824 99 92

62

Solution of 9-borabicyclo[3.3.1]nonane (CAS RN 280-64-8) in tetrahydrofurane (CAS RN 109-99-9), containing by weight 6 % or more 9-borabicyclo[3.3.1]nonane

0 %

-

31.12.2024

0.7861

3903 90 90

33

Copolymer of styrene, divinylbenzene and chloromethylstyrene (CAS RN 55844-94-5) with a purity by weight of 99 % or more

0 %

-

31.12.2024

0.7865

3909 40 00

70

Polymer in the form of flakes composed of 98 % or more by weight of phenolic resin (brominated octylphenol-formaldehyde) with a softening point of 80°C or more but not exceeding 95°C according to standard ASTM E28-92 (CAS RN 112484-41-0)

0 %

-

31.12.2024

0.7883

3920 69 00

70

Mono- or multilayer, biaxially oriented film:

—

composed of more than 85 % by weight of polylactic acid, not more than 5 % by weight of inorganic or organic additives, and not more than 10 % by weight of additives based on biodegradable polyesters,

—

with a thickness of 9 μm or more but not more than 120 μm,

—

with a length of 1 395 m or more but not more than 21 560 m,

—

biodegradable and compostable (as determined by the method EN 13432)

0 %

-

31.12.2024

0.7882

3920 69 00

30

Mono- or multilayer, transverse oriented, shrink film:

—

composed of more than 85 % by weight of polylactic acid, not more than 5 % by weight of inorganic or organic additives and not more than 10 % by weight of additives based on biodegradable polyesters,

—

with a thickness of 20 μm or more but not more than 100 μm,

—

with a length of 2 385 m or more but not more than 9 075 m,

—

biodegradable and compostable (as determined by the method EN 13432)

0 %

-

31.12.2024

0.7891

7326 90 94

40

Steel ball neck, drop forged, machined, also heat treated or surface treated, having an angle between the center of the conical head and the arm of less than 90° or having an angle between the center of the ball and the arm of less than 90°, for use in the manufacture of trailer hitches for passenger cars

 (2)

0 %

-

31.12.2024

0.7911

7506 20 00

10

Sheets and strips in coils of nickel alloy C276 (EN 2.4819) with

—

a thickness of 0,5 mm or more but not more than 3 mm,

—

a width of 770 mm or more but not more than 1 250 mm

0 %

-

31.12.2024

0.7851

8409 99 00

25

Hoses assembly for fuel return from injectors to engine fuel unit consisting of at least:

—

 three rubber hoses, whether or not with a protective braided sleeving,

—

 three connectors for connecting fuel injectors,

—

 five metal clamps,

—

 one T-shaped plastic joint,

for use in the manufacture of engines of motor vehicles

 (2)

0 %

-

31.12.2024

0.7850

8481 30 99

30

Brake booster check valve assembly containing at least:

—

three vulcanized rubber hoses,

—

one membrane valve,

—

two metal clamps,

—

one metal holder,

—

whether or not connecting metal pipe,

for use in the manufacture of motor vehicles

 (2)

0 %

-

31.12.2024

0.7920

8483 40 59

30

Hydrostatic speed changer:

—

with a hydro pump and a differential with wheel axle,

—

whether or not with a fan impeller and/or a pulley,

for use in the manufacture of lawn mowers of subheadings 8433 11 and 8433 19 or other mowers of subheading 8433 20

 (2)

0 %

p/st

31.12.2024

0.7857

8501 10 10

40

Synchronous hybrid stepper motor with:

—

an output not exceeding 18 W,

—

two phases,

—

a rated current of not more than 2,5 A/phase,

—

a rated voltage of not more than 20 V,

—

with or without a threaded shaft,

for use in the manufacture of 3D printers

 (2)

0 %

-

31.12.2024

0.7888

8507 60 00

68

Lithium-ion accumulator in a metal housing with:

—

a length of 173 mm or more but not more than 175 mm,

—

a width of 41,5 mm or more but not more than 43 mm,

—

a height of 85 mm or more but not more than 103 mm,

—

a nominal voltage of 3,6 V or more but not more than 3,75 V, and

—

a nominal capacity of 93 Ah or more but not more than 94 Ah

1.3 %

-

31.12.2024

0.7873

8537 10 91

20

Electronic assembly containing:

—

a microprocessor,

—

a programmable memory controller and other electronic components mounted on a printed circuit,

—

with or without light-emitting diode (LED) or liquid crystal display (LCD) indicators,

for use in the manufacture of products of subheadings 8418 21, 8418 29, 8421 12, 8422 11, 8450 11, 8450 12, 8450 19, 8451 21, 8451 29 and 8516 60

 (2)

0 %

-

31.12.2024

0.7848

8544 30 00

45

Linking seven-core cable for connecting sensor for pressure measure in intake manifold (Boost Pressure Sensor - BPS) and sockets for glow plugs with common connector, containing four sockets and two connectors for use in the manufacture of compression-ignition internal combustion piston engines for passenger car

 (2)

0 %

-

31.12.2024

0.7847

8544 30 00

55

Connecting five-core cable with connectors for coupling the temperature sensor and the exhaust manifold pressure difference sensor to the common connector for use in the manufacture of compression-ignition internal combustion piston engines of passenger cars

 (2)

0 %

-

31.12.2024

0.7856

8708 40 20

8708 40 50

70

60

Manual gearbox in cast aluminium housing with:

—

a width of not more than 480 mm,

—

a height of not more than 400 mm,

—

a length of not more than 550 mm,

—

five gears,

—

a differential gear,

—

an engine torque of 250 Nm or less,

—

for transverse installation,

for use in the manufacture of motor vehicles of heading 8703

 (2)

0 %

-

31.12.2024

0.7849

8708 93 10

8708 93 90

40

40

Clutch pedal with electronic parking brake connection (EPB), whether or not with sending signal function for:

—

 cruise control reset,

—

 electronic parking brake release,

—

start and stop engine management under Idle Stop and Go system (ISG),

for use in the manufacture of passenger vehicles

 (2)

0 %

-

31.12.2024

0.7921

8708 99 97

18

Hydrostatic speed changer:

—

with a hydro pump and a differential with wheel axle,

—

whether or not with a fan impeller and/or a pulley,

for use in the manufacture of tractors of subheadings 8701 91 90 and 8701 92 90, whose main function is that of a lawn mower

 (2)

0 %

p/st

31.12.2023

(2)

Suspension of duties is subject to end-use customs supervision in accordance with Article 254 of Regulation (EU) No 952/2013 of the European Parliament and of the Council of 9 October 2013 laying down the Union Customs Code (OJ L 269, 10.10.2013, p. 1)

Top