(1)

In accordance with Article 7 of Directive 2006/42/EC machinery manufactured in conformity with a harmonised standard, the reference to which has been published in the Official Journal of the European Union, is to be presumed to comply with the essential health and safety requirements covered by such a harmonised standard.

(2)

By letter of 19 December 2006, the Commission made a request (‘request M/396’) to CEN and Cen Elec for the drafting, the revision and the completion of the work on harmonised standards in support of Directive 2006/42/EC to take account of changes introduced by that Directive in comparison with Directive 98/37/EC of the European Parliament and of the Council (3).

(3)

On the basis of the request M/396, CEN drafted new harmonised standards EN ISO 18497:2018 on safety of highly automated agricultural machinery, EN 14033-4:2019 on technical requirements for running and working railway applications on urban rail, EN 16770:2018 on chip and dust extraction systems for indoor installation of woodworking machines, EN 16712-4:2018 on high expansion foam generators, EN 62841-4-2:2019 on particular safety requirements for hedge trimmers, EN 62841-3-12:2019 on particular safety requirements for transportable threading machines, EN ISO 20607:2019 on the preparation of the safety-relevant parts of the instruction manual for machinery, and EN 17067:2018 on safety requirements for remote control systems used in certain forestry machinery.

(4)

In addition, on the basis of the request M/396, CEN and Cen Elec revised and amended existing standards to adapt them to technological progress including standards EN ISO 10517:2019, EN ISO 11148-13:2018, EN 12012-1:2018, EN 12733:2018, EN 16985:2018, EN ISO 19296:2018, EN ISO 28927-4:2010 and EN ISO 28927-4:2010/A1:2018, EN 60204-1:2018, EN IEC 60204-11:2019, EN 707:2019, EN 1459-2:2015+A1:2018, EN ISO 3691-5:2015, EN ISO 4254-9:2018, EN 12312-8:2018, and EN ISO 19353:2019.

(5)

The Commission, together with CEN and Cen Elec, has assessed whether the standards drafted, revised and amended by CEN and Cen Elec comply with the request M/396.

(6)

The standards drafted, revised and amended by CEN and Cen Elec on the basis of the request M/396 satisfy the requirements which they aim to cover and which are set out in Directive 2006/42/EC. It is therefore appropriate to publish the references of those standards in the Official Journal of the European Union.

(7)

As the result of the work by CEN and Cen Elec on the basis of the request M/396 several harmonised standards published in the Official Journal of the European Union (4) have been replaced, revised or amended. It is therefore necessary to withdraw the references of those standards from the Official Journal of the European Union. In order to give manufacturers sufficient time to prepare for application of the new standards, revised standards and amendments to standards, it is necessary to defer the withdrawal of the references of harmonised standards.

(8)

References of harmonised standards EN ISO 19085-3:2017 on woodworking machines and EN ISO 28927-2:2009/A1:2017 on hand-held portable power tools, are included in Annexes I and II to Commission Implementing Decision (EU) 2019/436 (5). However, previous versions of those standards, EN 848-3:2012 and EN ISO 28927-2:2009, are published in the C series of Official Journal of the European Union (6) and have not been withdrawn. Given that standards EN 848-3:2012 and EN ISO 28927-2:2009 no longer represent the state of the art, it is appropriate to withdraw references of those standards from the Official Journal of European Union. In order to give manufacturers sufficient time to prepare for applying standards EN ISO 19085-3:2017 and EN ISO 28927-2:2009/A1:2017, it is necessary to defer the withdrawal of standards EN 848-3:2012 and EN ISO 28927-2:2009.

(9)

Annex I to Implementing Decision (EU) 2019/436 lists the references of harmonised standards conferring a presumption of conformity with Directive 2006/42/EC and Annex II to that Implementing Decision lists the references of harmonised standards conferring a presumption of conformity with restrictions. Given that several references of harmonised standards need to be published and no restriction needs to be added when publishing those standards, it is appropriate to add those references to Annex I to Implementing Decision (EU) 2019/436. It is also necessary to replace reference to standard EN 62841-2-1:2018 in that annex to include reference to the latest amendment of that standard.

(10)

Annex III to Implementing Decision (EU) 2019/436 lists the references of harmonised standards in support of Directive 2006/42/EC that are withdrawn from the Official Journal of the European Union as from the dates set out in that Annex. Given that several references of harmonised standards that are published in the C series of the Official Journal of the European Union need to be withdrawn, it is appropriate to add those references to Annex III to Implementing Decision (EU) 2019/436.

(11)

Implementing Decision (EU) 2019/436 should therefore be amended accordingly.

(12)

Compliance with a harmonised standard confers a presumption of conformity with the corresponding essential requirements set out in Union harmonisation legislation from the date of publication of the reference of such standard in the Official Journal of the European Union. This Decision should therefore enter into force on the date of its publication,