This document is an excerpt from the EUR-Lex website
Document 31989L0106
Council Directive 89/106/EEC of 21 December 1988 on the approximation of laws, regulations and administrative provisions of the Member States relating to construction products
Council Directive 89/106/EEC of 21 December 1988 on the approximation of laws, regulations and administrative provisions of the Member States relating to construction products
Council Directive 89/106/EEC of 21 December 1988 on the approximation of laws, regulations and administrative provisions of the Member States relating to construction products
OJ L 40, 11/02/1989, p. 12–26
(ES, DA, DE, EL, EN, FR, IT, NL, PT) This document has been published in a special edition(s)
(FI, SV, CS, ET, LV, LT, HU, MT, PL, SK, SL, BG, RO)
No longer in force, Date of end of validity: 30/06/2013; Repealed by 32011R0305
Council Directive 89/106/EEC of 21 December 1988 on the approximation of laws, regulations and administrative provisions of the Member States relating to construction products
Official Journal L 040 , 11/02/1989 P. 0012 - 0026
Finnish special edition: Chapter 13 Volume 17 P. 0185
Swedish special edition: Chapter 13 Volume 17 P. 0185
COUNCIL DIRECTIVE of 21 December 1988 on the approximation of laws, regulations and administrative provisions of the Member States (89/106/EEC) THE COUNCIL OF THE EUROPEAN COMMUNITIES, Having regard to the Treaty establishing the European Economic Community, and in particular Article 100a thereof, Having regard to the proposal from the Commission (1), In cooperation with the European Parliament (2), Having regard to the opinion of the Economic and Social Committee (3), Whereas Member States are responsible for ensuring that building and civil engineering works on their territory are designed and executed in a way that does not endanger the safety of persons, domestic animals and property, while respecting other essential requirements in the interests of general well-being; Whereas Member States have provisions, including requirements, relating not only to building safety but also to health, durability, energy economy, protection of the environment, aspects of economy, and other aspects important in the public interest; Whereas these requirements, which are often the subject of national provisions laid down by law, regulation or administrative action, have a direct influence on the nature of construction products employed and are reflected in national product standards, technical approvals and other technical specifications and provisions which, by their disparity, hinder trade within the Community; Whereas paragraph 71 of the White Paper on completing the internal market, approved by the European Council in June 1985, states that, within the general policy, particular emphasis will be placed on certain sectors, including construction; whereas the removal of technical barriers in the construction field, to the extent that they cannot be removed by mutual recognition of equivalence among all the Member States, should follow the new approach set out in the Council resolution of 7 May 1985 (4) which calls for the definition of essential requirements on safety and other aspects which are important for the general well-being, without reducing the existing and justified levels of protection in the Member States; Whereas the essential requirements constitute both the general and specific criteria with which construction works must comply; whereas such requirements are to be understood as requiring that the said works conform with an appropriate degree of reliability with one, some or all of these requirements when and where this is laid down in regulations; Whereas, as a basis for the harmonized standards or other technical specifications at European level and for the drawing up or granting of European technical approval, interpretative documents will be established in order to give concrete form to the essential requirements at a technical level; Whereas these essential requirements provide the basis for the preparation of harmonized standards at European level for construction products; whereas, in order to achieve the greatest possible advantage for a single internal market,to afford access to that market for as many mannifacturers as possible, to ensure the greatest possible degree of market transparency and to create the conditions for a harmonized system of general rules in the construction industry, harmonized standards should be established as far as, and as quickly as, possible; whereas these standards are drawn up by private bodies and must remain non-mandatory texts; whereas, for that purpose, the European Committee for Standardization (CEN) and the European Committee for Electrotechnical Standardization (Cenelec) are recognized as the competent bodies for the adoption of harmonized standards in accordance with the general guidelines for cooperation between the Commission and those two bodies signed on 13 November 1984; whereas, for the purposes of this Directive, a harmonized standard is a technical specification (European standard or harmonized document) adopted by one or both of those bodies upon a mandate given by the Commission in accordance with the provisions of Council Directive 83/189/EEC of 28 March 1983 laying down a procedure for the provision of information in the field of technical standards and regulations (5); Whereas the special nature of construction products requires the precise formulation of these harmonized standards; whereas it is therefore necessary to draw up interpretative documents in order to establish links between mandates for standards and the essential requirements; whereas harmonized standards, expressed as far as possible in terms of product performance, take account of these interpretative documents, which shall be drawn up in cooperation with the Member States; Whereas performance levels and requirements to be fulfilled by products in future in the Member States shall be laid down in classes in the interpretative documents and in the harmonized technical specifications in order to take account of different levels of essential requirements for certain works and of different conditions prevailing in the Member States; Whereas harmonized standards should include classifications that allow construction products which meet the essential requirements and which are produced and used lawfully in accordance with technical traditions warranted by local climatological and other conditions to continue to be placed on the market; Whereas a product is presumed fit for use if it conforms to a harmonized standard, a European technical approval or a non-harmonized technical specification recognized at Community level; whereas, in cases where products are of little importance with respect to the essential requirements and where they deviate from existing technical specifications, their fitness for use can be certified by recourse to an approved body; Whereas products thus considered fit for use are easily recognizable by the EC mark; whereas they must be allowed free movement and free use for their intended purpose throughout the Community; Whereas, in the case of products where European standards cannot be produced or foreseen within a reasonable period of time or of products which deviate substantially from a standard, the fitness for use of such products may be proved by recourse to European technical approvals on the basis of common guidelines; whereas the common guidelines for the granting of European technical approvals will be adopted on the basis of the interpretative documents; Whereas, in the absence of harmonized standards and European technical approvals, national or other non-harmonized technical specifications may be recognized as providing a suitable basis for a presumption that the essential requirements are met; Whereas it is necessary to ensure the conformity of products with harmonized standards and with non-harmonized technical specifications recognized at European level by means of procedures of production control by manufacturers and of supervision, testing assessment and certification by independent qualified third parties, or by the manufacturer himself; Whereas a special procedure should be provided as an interim measure for products where standards or technical approvals recognized at European level do not yet exist; whereas this procedure should facilitate recognition of the results of tests performed in another Member State according to the technical requirements of the Member State of destination; Whereas a Standing Committee on Construction should be set up comprising experts designated by Member States to assist the Commission on questions arising from the implementation and practical application of this Directive; Whereas the responsibility of Member States for safety, health and other matters covered by the essential requirements on their territory should be recognized in a safeguard clause providing for appropriate protective measures, HAS ADOPTED THIS DIRECTIVE: CHAPTER I Field of application - Definitions - Requirements Technical specifications - Free movement of goods Article 1 1. This Directive shall apply to construction products in so far as the essential requirements in respect of construction works under Article 3 (1) relate to them 2. For the purposes of this Directive, 'construction product' means any product which is produced for incorporation in a permanent manner in construction works, including both buildings and civil engineering works. 'Construction Products' are hereinafter referred to as 'products'; construction works including both buildings and civil engineering works are hereinafter referred to as 'works'. Article 2 1. Member States shall take all necessary measures to ensure that the products referred to in Article 1, which are intended for use in works, may be placed on the market only if they are fit for this intended use, that is to say they have such characteristics that the works in which they are to be incorporated, assembled, applied or installed, can, if properly designed and built, satisfy the essential requirements referred to in Article 3 when and where such works are subject to regulations containing such requirements. 2. When products are subject to other Community directives with regard to other aspects, the EC conformity mark, hereinafter referred to as the 'EG mark', referred to in Article 4 (2) shall indicate in these cases that the requirements of those other directives have also been complied with. 3. When a future directive concerns mainly other aspects and only to a minor extent the essential requirements of this Directive, that subsequent directive shall contain provisions ensuring that it also covers the requirements of this Directive. 4. This Directive shall not affect the right of Member States to specify - with due observance of the provisions of the Treaty - the requirements they deem necessary to ensure that workers are protected when using products, provided it does not mean the products are modified in a way unspecified in this Directive Article 3 1. The essential requirements applicable to works which may influence the technical characteristics of a product are set out in terms of objectives in Annex I. One, some or all of these requirements may apply; they shall be satisfied during an economically reasonable working life. 2. In order to take account of possible differences in geographical or climatic conditions or in ways of life as well as different levels of protection that may prevail at national, regional or local level, each essential requirement may give rise to the establishment of classes in the documents referred to in paragraph 3 and the technical specifications referred to in Article 4 for the requirement to be respected. 3. The essential requirements shall be given concrete form in documents (interpretative documents) for the creation of the necessary links between the essential requirements laid down in paragraph 1 and the standardization mandates, mandates for guidelines for European technical approval or the recognition of other technical specifications within the meaning of Articles 4 and 5. Article 4 1. Standards and technical approvals shall, for the purposes of ehis Directive, be referred to as 'technical specifications' For the purposes of this Directive, harmonized standards shall be the technical specifications adopted by CEN, Cenelec or both, on mandates given by the Commission in conformity with Directive 83/189/EEC on the basis of an opinion given by the Committee referred to in Article 19 and in accordance with the general provisions concerning cooperation between the Commission and these two bodies signed on 13 November 1984. 2. Member States shall presume that the products are fit for their intended use if they enable works in which they are employed, provided the latter are properly designed and built, to satisfy the essential requirements referred to in Article 3, and those products bear the EC mark. The EC mark shall indicate: (a) that they comply with the relevant national standards transposing the harmonized standards, references to which have been published in the Official Journal of the European Countries. Member States shall publish the references of these national standards: (b) that they comply with a European technical approval, delivered according to the procedure of Chapter III, or (c) that they comply with the national technical specifications referred to in paragraph 3 in as much as harmonized specifications do not exist; a list of these national specifications shall be drawn up according to the procedure in Article 5 (2). 3. Member States may communicate to the Commission the texts of their national technical specifications which they regard as complying with the essential requirements referred to in Article 3. The Commission shall forward these national technical specifications forthwith to the other Member States. In accordance with the procedure provided for in Article 5 (2), it shall notify the Member States of those national technical specificationsion respect of which there is presumption of conformity with the essential requirements referred to in Article 3. This procedure will be initiated and managed by the Commission in consultation with the committee referred to in Article 19 Member States shall publish the references to these technical specifications. The Commission shall also publish them in the Official Journal of the European Countries 4. Where a manufacturer, or his agent, established in the Community, has not applied, or has applied only in part, the existing technical specifications referred to in paragraph 2, which require, according to the criteria set out in Article 13 (4), the product to be submitted for a declaration of conformity as defined in Annex III (2) (ii), second and third possibilities, the corresponding decisions under Article 13 (4) and Annex III shall apply and such a product's fitness for use within the meaning of Article 2 (1) shall be established in accordance with the procedure set out in Annex III (2) (ii), second possibility. 5. The Commission, in consultation with the committee referred to in Article 19, shall draw up, manage and revise periodically a list of products which play a minor part with respect to health and safety and in respect of which a declaration of compliance with the 'acknowledged rule of technology', issued by the manufacturer, will authorize such products to be placed on the market. 6. The EC mark signifies that products satisfy the requirements of paragraphs 2 and 4 of this Article. It is for the manufacturer, or his agent established in the Community, to take responsibility for affixing the EC mark on the product itself, on a label attached to it, on its packaging, or on the accompanying commercial documents. The model of the EC mark and conditions of its use are given in Annex III. Products referred to in paragraph 5 shall not bear the EC mark. Article 5 1. Where a Member State or the Commission is of the opinion that the harmonized standards or European technical approvals referred to in Article 4 (2), points (a) and (b), or the mandates referred to in Chapter II, do not satisfy the provisions of Articles 2 and 3, that Member State or the Commission shall notify the committee referred to in Article 19, setting out its reasons. The committee shall deliver an urgent opinion. In the light of the opinion of the committee, and after consuItation with the committee set up under Directive 83/189/EEC where it concerns harmonized standards, the Commission shall inform Member States if the standards or approvals concerned should be withdrawn in the publications referred to in Article 7 (3). 2. On reception of the communication referred to in Article 4 (3), the Commission shall consult the committee referred to in Article 19. In the light of the opinion of the committee, the Commission shall notify Member States whether the technical specification in question should benefit from the presumption of conformity and, if so, publish a reference to it in the Official Journal of the European Countries. If the Commission or a Member State believes that a technical specification no longer fulfills the conditions necessary for presumption of conformity with the provisions of Articles 2 and 3, the Commission shall consult the committee referred to in Article 19. In the light of the opinion of the said committee, the Commission shall notify the Member States whether the national technical specification in question should continue to benefit from presumption of conformity, and, if not, whether the reference to it referred to in Article 4 (3) should be withdrawn. Article 6 1. Member States shall not impede the free movement, placing on the market or use in their territory of products which satisfy the provisions of this Directive Member States shall ensure that the use of such products, for the purpose for which they were intended, shall not be impeded by rules or conditions imposed by public bodies or private bodies acting as a public undertaking or acting as a public body on the basis of a monopoly position. 2. Member States shall, however, allow products not covered by Article 4 (2)to be placed on the market in their territory if they satisfy national provisions consistent with the Treaty until the European technical specifications referred to in Chapters II and III provide otherwise. The Commission and the committee referred to in Article 19 will monitor and review the development of the European technical specifications on a regular basis. 3. If the relevant European technical specifications, either themselves or on the basis of the interpretative documents referred to in Article 3 (3), distinguish between different classes corresponding to different performance levels, Member States may determine the performance levels also to be observed in their territory only within the classifications adopted at Community level and only subject to the use of all or some classes or one class. CHAPTER II Harmonized standards Article 7 1. In order to ensure the quality of harmonized standards for products, the standards shall be established by the European standards organizations on the basis of mandates given by the Commission in accordance with the procedure laid down in Directive 83/189/EEC and, after consulting the committee referred to in Article 19, in accordance with the general provisions concerning cooperation between the Commission and these bodies signed on 13 November 1984. 2. The resulting standards shall be expressed as far as practicable in product performance terms, having regard to the interpretative documents. 3. Once the standards have been established by the European standards organizations, the Commission shall publish the references of the standards in the 'C' series of the Official Official Journal of the European Countries. CHAPTER III European technical approval Article 8 1. European technical approval is a favourable technical assessment of the fitness for use of a product for an intended use, based on fulfilment of the essential requirements for building works for which the product is us2. European technical approval may be granted to: (a) products for which there is neither a harmonized standard, nor a recognized national standard, nor a mandate for a harmonized standard, and for which the Commission, after consulting the committee referred to in Article 19, considers that a standard could not, or not yet, be elaborated; and (b) products which differ significantly from harmonized or recognized national standards. Even in the case where a mandate for a harmonized standard has been issued, the provisions referred to in (a) do not exclude the granting of European technical approval for products for which guidelines for such approval exist. This shall apply until the entry into force of the harmonized standard in the Member States. 3. In special cases, the Commission may, as a derogation from paragraph 2 (a), authorize the issue of European technical approval, after consulting the committee referred to in Article 19, for products for which there is a mandate for a harmonized standard, or for which the Commission has established that a harmonized standard can be elaborated. The authorization shall be valid for a fixed period. 4. European technical approval shall in general be issued for a five-year period. This period may be extended Article 9 1. European technical approval for a product shall be based on examinations, tests and an assessment on the basis of the interpretative documents referred to in Article 3 (3) and of the guidelines referred to in Article 11 for this product or the corresponding family of products. 2. Where guidelines referred to in Article 11 do not or not yet exist, European technical approval may be issued by reference to the relevant essential requirements and the interpretative documents where the assessment of the product is adopted by the approval bodies acting jointly in the organization referred to in Annex II. If the approval bodies cannot agree, the matter shall be referred to the committee referred to in Article 19. 3. The European technical approval for a product shall be issued in a Member State in accordance with the procedure laid down in Annex II at the request of the manufacturer or his agent established in the Community. Article 10 1. Each Member State shall notify the other Member States and the Commission of the names and addresses of the bodies which it has authorized to issue European technical approvals. 2. The approval bodies must satisfy the requirements of chis Directive and in particular must be able: - to assess the fitness for use of new products on the basis of scientific and practical knowledge, - to take impartial decisions in relation to the interests of the manufacturers concerned or their agents, and - to collate the contributions of all the interested parties in a balanced assessment. 3. The list of approval bodies which are competent to issue European technical approvals, as well as any amendments to that list, shall be published in the'G' series of the Official Official Journal of the European Countries. Article 11 1. The Commission shall, after consulting the committee referred to in Article 19, issue mandates for establishing guidelines for European technical approval for a product or family of products to the organization of approval bodies designated by the Member States. 2. The guidelines for European technical approval for a product or family of products should contain the following, in particular: (a) a list of the relevant interpretative documents referred to in Article 3 (3); (b) specific requirements for the products within the meaning of the essential requirements referred to in Article 3 (1); (c) the test procedures; (d) method of assessing and judging the resuIts of the tests; (e) the inspection and conformity procedures which must correspond to Articles 13, 14 and 15; (f) the period of validity of the European technical approval. 3. The guidelines for European technical approval shall, after consultation with the committee referred to in Article 19, be published by the Member States in their official language or languages. CHAPTER IV Interpretative documents Article 12 1. The Commission shall, after consulting the committee referred to in Article 19, instruct technical committees in which the Member States participate to draw up the interpretative documents referred to in Article 3 (3). 2. The interpretative documents shall: (a) give concrete form to the essential requirements laid down in Article 3 and in Annex I by harmonizing the terminology and the technical bases and indicating classes or levels for each requirement where necessary and where the state of scientific and technical knowledge so permits; (b) indicate methods of correlating these classes or levels of requirement with the technical specifications referred to in Article 4, for example, methods of calculation and of proof, technical rules for project design, etc.; (c) serve as a reference for the establishment of harmonized standards and guidelines for European technical approval and for recognition of national technical specifications in accordance with Article 4 (3). 3. The Commission shall publish the interpretative documents in the 'G' series of the Official Official Journal of the European Countries after Soliciting the opinion of the committee referred to in Article 19. CHAPTER V Attestation of conformity Article 13 1. The manufacturer, or his agent established in the Community, shall be responsible for the attestation that products are in conformity with the requirements of a technical specification within the meaning of Article 4. 2. Products that are the subject of an attestation of conformity shall benefit from the presumption of conformity with technical specifications within the meaning of Article 4. Conformity shall be established by means of testing or other evidence on the basis of the technical specifications in accordance with Annex III. 3. The attestation of conformity of a product is dependention: (a) the manufacturer having a factory production control system to ensure that production conforms with the relevant technical specifications; or (b) for particular products indicated in the relevant technical specifications, in addition to a factory production control system, an approved certification body being involved in assessment and surveillance of the production control or of the product itself. 4. The choice of the procedure within the meaning of paragraph 3 for a given product or family of products shall be specified by the Commission, after consultation of the committee referred to in Article 19, according to: (a) the importance of the part played by the product with respect to the essential requirements, in particular those relating to health and safety; (b) the nature of the product; (c) the effect of the variability of the product's characteristics on its serviceability; (d) the susceptibility to defects in the product manufacture; in accordance with the particulars set out in Annex III. In each case, the least onerous possible procedure consistent with safety shall be chosen. The procedure thus determined shall be indicated in the mandates and in the technical specifications or in the publication thereof. 5. In the case of individual (and non-series) production, a declaration of conformity in accordance with Annex III (2) (ii), third possibility, shall suffice, unless otherwise provided by the technical specifications for products which have particularly important implications for health and safety. Article 14 1. In accordance with Annex III, the procedures described shall lead: (a) in the case of Article 13 (3) (a), to the production of a declaration of conformity for a product by the manufacturer, or his agent established in the Community; or (b) in the case of Article 13 (3) (b), to the issue by an approved certification body of a certificate of conformity for a system of production control and surveillance or for the product itself. Detailed rules for the implementation of the procedures of attestation of conformity are given in Annex III. 2. The manufacturer's declaration of conformity or the certificate of conformity shall entitle the manufacturer, or his agent established in the Community, to affix the corresponding EC mark on the product itself, on a label attached to it, on its packaging or on the accompanying commercial documents. The model of the EC mark and the rules for its use in respect of each of the procedures of attestation of conformity are given in Annex III. Article 15 1. Member States shall ensure that the EC mark is correctly used. 2. Where it is established that the EC mark has been affixed to a product which does not satisfy, or no longer satisfies, this Directive, the Member State in which conformity was attested shall ensure that, if necessary, the use of the EC mark is forbidden and unsold products are withdrawn, or marks obliterated, until such time as the product concerned is brought back to conformity The Member State concerned shall immediately inform the other Member States and the Commission, giving all the qualitative and quantitative details necessary to identify the product which does not conform. 3. Member States shall ensure that the affixing to products or their packing of marks which are likely to be confused with the EC mark shall be prohibited. CHAPTER VI Special procedures Article 16 1. In the absence of technical specifications, as defined in Article 4, for any given product, the Member State of destination shall, on request in individual cases, consider the product to be in conformity with the national provisions in force if they have satisfied tests and inspections carried out by an approved body in the producing Member State according to the methods in force in the Member State of destination or recognized as equivalent by that Member State. 2. The producing Member State shall inform the Member State of destination, in accordance with whose provisions the tests and inspections are to be carried out, of the body it intends to approve for this purpose. The Member State of destination and the producing Member State shall provide each other with all necessary information. On conclusion of this exchange of information the producing Member State shall approve the body thus designated. If a Member State has misgivings, it shall substantiate its position and inform the Commission. 3. Member States shall ensure that the designated bodies afford one another all necessary assistance. 4. Where a Member State establishes that an approved body is not carrying out the tests and inspections properly in conformity with its national provisions, it shall notify the Member State in which the body is approved thereof. That Member State shall inform the notifying Member State. within a reasonable time limit of what action has been taken. If the notifying Member State does not consider the action taken to be sufficient, it may prohibit the placing on the market and use of the product in question or make it subject to special conditions. It shall inform the other Member State and the Commission thereof. Article 17 Member States of destination shall attach the same value to reports and attestations of conformity issued in the producing Member State in accordance with the procedure referred to in Article l6, as they do to their own corresponding national documents. CHAPTER VII Approved bodies Article 18 1. Each Member State shall forward to the Commission a list of names and addresses of certification bodies, inspection bodies and testing laboratories which have been designated by that Member State for tasks to be carried out for the purposes of technical approvals, conformity certifications, inspections and tests according to this Directive. 2. Certification bodies, inspection bodies and testing laboratories shall comply with the criteria laid down in Annex IV. 3. Member States shall indicate the products which fall within the competence of the bodies and laboratories referred to in paragraph 1 and the nature of the tasks to be assigned to them. CHAPTER VIII Standing Committee on Construction Article 19 1. A Standing Committee on Construction is hereby set up 2. The committee shall be made up of representatives appointed by the Member States. It shall be chaired by a representative of the Commission. Each Member State shall appoint two representatives. The representatives may be accompanied by experts. 3. The committee shall draw up its own rules of procedure. Article 20 1. The committee referred to in Article 19 may, at the request of its chairman or a Member State, examine any question posed by the implementation and the practical application of this Directive. 2. The provisions necessary for: (a) the establishment of classes of requirements in so far as they are not included in the interpretative documents and the establishment of the procedure for attesting conformity in mandates for standards pursuant to Article 7 (1) and guidelines for approvals pursuant to Article 11 (1); (b) the giving of instructions for the drawing-up of interpretative documents pursuant to Article 12 (1) and decisions on interpretative documents pursuant to Article 12 (3); (c) the recognition of national technical specifications in accordance with Article 4 (3); shall be adopted in accordance with the procedure laid down in paragraphs 3 and 4. 3. The representative of the Commission shall submit to the committee a draft of the measures to be taken. The committee shall deliver its opinion on the draft within a time limit which the chairman may lay down according to the urgency of the matter. The opinion shall be delivered by the majority laid down in Article 148 (2) of the Treaty in the case of decisions which the Council is required to adopt on a proposal from the Commission. The votes of the representatives of the Member States within the committee shall be weighted in the manner set out in that Article. The chairman shall not vote. 4. The Commission shall adopt the measures envisaged if they are in accordance with the opinion of the committee If the measures envisaged are not in accordance with the opinion of the committee, or if no opinion is delivered, the Commission shall, without delay, submit to the Council a proposal relating to the measures to be taken. The Council shall act by qualified majority. If, within three months of the proposal being submitted to it, the Council has not acted, the proposed measures shall be adopted by the Commission. CHAPTER IX Safeguard clause Article 21 1. Where a Member State ascertains that a product declared to be in conformity with the terms of this Directive. does not comply with Articles 2 and 3, it shall take all appropriate measures to withdraw those products from the market, prohibit the placing thereof on the market or restrict free movement thereof. The Member State concerned shall immediately inform the Commission of any such measure, indicating the reasons for its decision, and in particular whether non-conformity is due to: (a) failure to comply with Articles 2 and 3, where the product does not meet the technical specifications referred to in Article 4; (b) incorrect application of the technical specifications referred to in Article 4; (c) shortcomings in the technical specifications referred to in Article 4 themselves 2. The Commission shall carry out a consultation of the parties concerned as soon as possible. Where the Commission finds, after this consultation, that the action is justified, it shall immediately so inform the Member State that took the action as well as the other Member States. 3. Where the decision referred to in paragraph 1 is attributed to shortcomings in the standards or technical specifications, the Commission, after consulting the parties concerned, shall bring the matter before the committee referred to in Article 19, as well as the committee set up under Directive 83/189/EEC in the case of shortcomings in a harmonized standard, within two months if the Member State which has taken the measures intends to uphold them, and shall start the procedures referred to in Article 5 (2). 4. The Member State concerned shall take appropriate action against whomsoever made the declaration of conformity and shall inform the Commission and the other Member States thereof. 5. The Commission shall ensure that the Member States are kept informed of the progress and outcome of this procedure. CHAPTER X Final provisions Article 22 1. Member States shall bring into force the laws, regulations and administrative provisions necessary to comply with the provisions of this Directive within 30 months of its notification (6). They shall forthwith inform the Commission thereof. 2. Member States shall communicate to the Commission the texts of the provisions of national law which they adopt in the field governed by this Directive. Article 23 At the latest by 31 December 1993, the Commission, in consultation with the committee referred to in Article 19, shall re-examine the practicability of the procedures laid down by this Directive and, where necessary, submit proposals for appropriate amendments. Article 24 This Directive is addressed to the Member States. Done at Brussels, 21 December 1988. For the Council The President V. PAPANDREOU (1) OJ N° C 93, 6. 4. 1987, p. 1. (2) OJ N° C 305, 16. 11. 1987, p. 74 and OJ N° C 326, 19. 12. 1988. (3) OJ N° C 95, 11. 4. 1988, p. 29. (4) OJ N° C 136, 4. 6. 1985, p. 1. (5) OJ N° L 109, 26. 4. 1983, p. 8 (6) This Directive was notified to the Member States on 27 December 1988. ANNEX I ESSENTIAL REQUIREMENTS The products must be suitable for construction works which (as a whole and in their separate parts) are fit for their intended use, account being taken of economy, and in this connection satisfy the following essential requirements where the works are subject to regulations containing such requirements. Such requirements must, subject to normal maintenance, be satisfied for an economically reasonable working life. The requirements generally concern actions which are forseeable. 1. Mechanical resistance and stability The construction works must be designed and built in such a way that the loadings that are liable to act on it during its constructions and use will not lead to any of the following: (a) collapse of the whole or part of the work: (b) major deformations to an inadmissible degree; (c) damage to other parts of the works or to fittings or installed equipment as a result of major deformation of the load-bearing construction; (d) damage by an event to an extent disproportionate to the original cause. 2. Safety in case of fire The construction works must be designed and built in such a way that in the event of an outbreak of fire: - the load-bearing capacity of the construction can be assumed for a specific period of time, - the generation and spread of fire and smoke within the works are limited, - the spread of the fire to neighbouring construction works is limited, - the safety of rescue teams is taken into consideration. 3. Hygiene, health and the environment The construction work must be designed and built in such a way that it will not be a threat to the hygiene or health of the occupants or neighbours, in particular as a result of any of the following: - the giving-off of toxic gas, - the presence of dangerous particles or gases in the air, - the emission of dangerous radiation, - pollution or poisoning of the water or soil, - faulty elimination of waste water, smoke, solid or liquid wastes, - the Presence of damp in parts of the works or on surfaces within the works 4. Safety in use The construction work must be designed and built in such a way that it does not present unacceptable risks of accidents in service or in operation such as slipping, falling, collision, burns, electrocution, injury from explosion. 5. Protection against noise The construction works must be designed and built in such a way that noise perceived by the occupants or people nearby is kept down to a level that will not threaten their health and will allow them to sleep, rest and work in satisfactory conditions. 6. Energy economy and heat retention The construction works and its heating, cooling and ventilation installations must be designed and built in such a way that the amount of energy required in use shall be low, having regard to the climatic conditions of the location and the occupants. ANNEX II EUROPEAN TECHNICAL APPROVAL 1. A request for approval may be made by a manufacturer, or his agent established in the Community, only to a single body authorized for this Purpose. 2. The approval bodies designated by the Member States form an organization. In the performance of its duties, this organization is obliged to work in close coordination with the Commission, which shall consult the committee referred to in Article 19 of the Directive on important matters. Where a Member State has designated more than one approval body, the Member State shall be responsible for coordinating such bodies; it shall also designate the body which shall be spokesman in the organization. 3. The common procedural rules for making the request, the preparation and the granting of approvals are drawn up by the organization comprising the designated approval bodies. The common procedural rules are adopted by the Commission on the basis of the opinion of the committee in accordance with Article 20. 4. In the framework of the organization comprising them, the approval bodies shall afford each other all necessary support. This organization is also responsible for coordination on specific questions of technical approval. If necessary, the organization shall establish sub-groups for this purpose. 5. The European technical approvals are published by the approval bodies, which notify all other approved bodies. At the request of an authorized approval body, a complete set of supporting documents for an approval which has been granted is to be forwarded to the latter for information. 6. The costs arising from the European technical approval procedure shall be paid by the applicant in accordance with national rules. ANNEX III ATTESTATION OF CONFORMITY WITH TECHNICAL SPECIFICATIONS 1. METHODS OF CONTROL OF CONFORMITY When the procedures for aetestation of conformity of a product with technical specifications pursuant to Article 13 are being determined, the following methods of control of conformity shall be used; the choice and combination of methods for any given system shall depend on requirements for the particular product or group of products according to the criteria indicated in Article 13 (3) and (4); (a) initial type-testing of the product by the manufacturer or an approved body; (b) testing of samples taken at the factory in accordance with a prescribed test plan by the manufacturer or an approved body; (c) audit-testing of samples taken at the factory, on the open market or on a construction site by the manufacturer or an approved body; (d) testing of samples from a batch which is ready for delivery, or has been delivered, by the manufacturer or an approved body; (e) factory production control; (f) initial inspection of factory and of factoty production control by an approved body; (g) continuous surveillance, judgement and assessment of factory production control by an approved body. In the Directive, factory production control means the permanent internal control of production exercised by the manufacturer. All the elements, requirements and provisions adopted by the manufacturer shall be documented in a systematic mannter in the form of written policies and procedures. This production control system documentation shall ensure a common understanding of quality assurance and enable the achievement of the required product characteristics and the effective operation of the production control system to be checked. 2. SYSTEMS OF CONFORMITY ATTESTATION preference is given to application of the following systems of conformity attestation (i) Certification of the conformity of the product by an approved certification body on the basis of: (a) (tasks for the manufacturer) (1) factory production control; (2) further testing of samples taken at the factory by the manufacturer in accordance with a prescribed test plan; (b) (tasks for the approved body) (3) initial type-testing of the product; (4) intitial inspection of factory and of factory production control; (S) continnious surveillance, assessment and approval of factory production control; (6) possibly, audit-testing of samples taken at the factory, on the market or on the construction site. (ii) Declaration of conformity of the product by the manufacturer on the basis of: First possibility: (a) (tasks for the manufacturer) (1) initial type-testing of the product; (2) factory production control; (3) possibly, testing of samples taken at the faccory in accordance with a prescribed test plan; (b) (tasks for the approved body) (4) certification of factory production control on the basis of: - initial inspection of factory and of factory production control, - possibly, continuous surveillance, assessment and approval of factory production control. Second possibility: (1) initial type-testing of the product by an approved laboratory; (2) factory production control Third possibility: (a) initial type-testirtg by the manufacturer; (b) factory production control 3. BODIES INVOLVED IN THE ATTESTATION OF CONFORMITY With respect to the function of the bodies involved in the attestation of conformity, distinction shall be made between (i) certification body, which means an impartial body, governmental or non-governmental, possessing the necessary competence and responsibility to carry out conformity certification according to given rules of procedure and management; (ii) inspection body, which means an impartial body having the organization, staffing, competence and integrity to perform according to specified criteria functions such as assessing, recommending for acceptance and subsequent audit of manufacturers' quality control operations, and selection and evaluation of products on site or in factories or elsewhere, according to specific criteria; (iii) testing laboratory, which means alaboratory which measures,examines,tests,calibrates or otherwise determines the chatacteristics or performance of materials or products In case (i) and (ii) (first possibility) of paragraph 2, the three functions 3 (i) to (iii) may be performed by one and the same body or by different bodies, in which case the inspection body and/or the testing laboratory involved in the attestation of conformity carries out its function on behalf of the certification body. For the criteria concerning the competence, impartiality and integrity of certification bodies, inspection bodies and testing laboratories, see Annex IV. 4. EC CONFORMITY MARK, EC CERTIFICATE OF CONFORMITY, EC DECLARATION OF CONFORMITY 4.1. EC conformity mark The EC conformity mark shall consist of the symbol CE as given below. >START OF GRAPHIC> >END OF GRAPHIC> It shall be accompanied by: - the name or identifying mark of the producer, and, where appropriate: - inditations -tn identify the characteristics of the product, where appropriate to technical specifications, - the last two digits of the year of manufacture, - the identification symbol of the inspection body involved, - the number of the EC certificate of conformity. 4.2. EC certificate of conformity The EC certificate of conformity shall contain in particular: - name and address of the certification body, - name and address of the manufacturer or his agent established in the Community, - description of the product (type, identification, use...), - provisions to which the product conforms, - particular conditions applicable to the use of the product, - the certificate's number, - conditions and period of validity of the certificate, where applicable, - name of, and position held by, the person empowered to sign the certificate. 4.3. EC declaration of conformity The EC declaration of conformity shall contain in particular: - name and address of the manufacturer or his agent established in the Community, - description of the product (type, identification, use...), - provision to which the product conforms, - particular conditions applicable to the use of the product, - name and address of the approved body, where applicable, - name of, and position held by, the person empowered to sign the declaratinn on behalf of the manufacturer or of his authorized representative. 4.4. The certificate and declaration of conformity shall be presented in the official language or languages of the Member State in which the product is to be used. ANNEX IV APPROVAL OF TESTING LABORATORIES, INSPECTION BODIES AND CERTIFIGATION BODIES The testing laboratories, the inspection bodies and the certification bodies designated by the Member States must fulfil the following minimum conditions: l. availability of personnel and of the necessary means and equipment; 2. technical competence and professionalintegrity of personnel; 3. impartiality, in carrying out the tests, preparing the reports, issuing the certificates and performing the surveillance provided for in the Directive, of staff and technical personnel in relation to allcircles, groups or persons directly or indirectly concerned with construction products; 4. maintenance of professional secrecy by personnei: 5. subscription of a civil liability insurance unless that liability is covered by the State under nationallaw Fulfilment of the conditions under 1 and 2 shall be verified at intervals by the competent authorities of Member States.