EUR-Lex Access to European Union law
This document is an excerpt from the EUR-Lex website
Document 32022D1668
Commission Implementing Decision (EU) 2022/1668 of 28 September 2022 on harmonised standards for equipment and protective systems intended for use in potentially explosive atmospheres drafted in support of Directive 2014/34/EU of the European Parliament and of the Council (Text with EEA relevance)
Commission Implementing Decision (EU) 2022/1668 of 28 September 2022 on harmonised standards for equipment and protective systems intended for use in potentially explosive atmospheres drafted in support of Directive 2014/34/EU of the European Parliament and of the Council (Text with EEA relevance)
Commission Implementing Decision (EU) 2022/1668 of 28 September 2022 on harmonised standards for equipment and protective systems intended for use in potentially explosive atmospheres drafted in support of Directive 2014/34/EU of the European Parliament and of the Council (Text with EEA relevance)
C/2022/6855
OJ L 251, 29/09/2022, p. 6–16
(BG, ES, CS, DA, DE, ET, EL, EN, FR, GA, HR, IT, LV, LT, HU, MT, NL, PL, PT, RO, SK, SL, FI, SV)
In force: This act has been changed. Current consolidated version: 02/08/2023
29.9.2022 |
EN |
Official Journal of the European Union |
L 251/6 |
COMMISSION IMPLEMENTING DECISION (EU) 2022/1668
of 28 September 2022
on harmonised standards for equipment and protective systems intended for use in potentially explosive atmospheres drafted in support of Directive 2014/34/EU of the European Parliament and of the Council
(Text with EEA relevance)
THE EUROPEAN COMMISSION,
Having regard to the Treaty on the Functioning of the European Union,
Having regard to Regulation (EU) No 1025/2012 of the European Parliament and of the Council of 25 October 2012 on European standardisation, amending Council Directives 89/686/EEC and 93/15/EEC and Directives 94/9/EC, 94/25/EC, 95/16/EC, 97/23/EC, 98/34/EC, 2004/22/EC, 2007/23/EC, 2009/23/EC and 2009/105/EC of the European Parliament and of the Council and repealing Council Decision 87/95/EEC and Decision No 1673/2006/EC of the European Parliament and of the Council (1), and in particular Article 10(6) thereof,
Whereas:
(1) |
In accordance with Article 12 of Directive 2014/34/EU of the European Parliament and of the Council (2), products which are in conformity with harmonised standards or parts thereof, the references of which have been published in the Official Journal of the European Union, are to be presumed to be in conformity with the essential health and safety requirements set out in Annex II to that Directive covered by those standards or parts thereof. |
(2) |
By letter BC/CEN/46-92 – BC/CLC/05-92 of 12 December 1994, the Commission made a request to the European Committee for Standardization (CEN) and the European Committee for Electrotechnical Standardization (Cenelec) for the drafting and revision of harmonised standards in support of Directive 94/9/EC of the European Parliament and of the Council (3) (‘the request’). That Directive was replaced by Directive 2014/34/EU without changing the essential health and safety requirements set out in Annex II to Directive 94/9/EC. Those requirements are currently set out in Annex II to Directive 2014/34/EU. |
(3) |
In particular, CEN and Cenelec were requested to draft new standards on the design and testing of equipment for use in potentially explosive atmospheres as indicated in Chapter I of the standardisation programme agreed between CEN and Cenelec and the Commission and attached to the request. CEN and Cenelec were also requested to revise the existing standards with a view to aligning them to the essential health and safety requirements of Directive 94/9/EC. |
(4) |
On the basis of the request, CEN drafted harmonised standard ‘EN 15967:2022 – Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapours’. |
(5) |
The Commission together with CEN has assessed whether standard ‘EN 15967:2022’ drafted by CEN complies with the request. |
(6) |
The standard ‘EN 15967:2022’ satisfies the requirements it aims to cover and which are set out in Annex II to Directive 2014/34/EU. It is therefore appropriate to publish the reference of that standard in the Official Journal of the European Union. |
(7) |
Standard ‘EN 15967:2022’ replaces standard EN 15967:2011. It is therefore necessary to withdraw from the C series of the Official Journal of the European Union the reference of standard ‘EN 15967:2011’ that is published by Commission communication 2018/C 371/01 (4). |
(8) |
In order to give manufacturers sufficient time to adapt their products to the revised version of standard ‘EN 15967:2011’, it is necessary to defer the withdrawal of the reference to that standard. |
(9) |
In the interests of clarity and rationality, a complete list of references of harmonised standards drafted in support of Directive 2014/34/EU and satisfying the requirements they aim to cover should be published in a single act. The references of harmonised standards drafted in support of Directive 2014/34/EU are currently published by Commission Implementing Decision (EU) 2019/1202 (5) and Communication 2018/C 371/01. |
(10) |
Implementing Decision (EU) 2019/1202 has been substantially amended several times. In the interests of clarity and rationality, and since further amendment needs to be made to that Implementing Decision, that Implementing Decision should be repealed and replaced. |
(11) |
Many of the references of harmonised standards published by Communication 2018/C 371/01 have been withdrawn. Implementing Decision (EU) 2019/1202 provides for withdrawal of the remaining references of harmonised standards that are published by that Communication. In the interests of clarity and rationality Communication 2018/C 371/01 should be repealed. In order to give manufacturers sufficient time to adapt their products to the revised versions of the standards concerned, Communication 2018/C 371/01 should continue to apply until the dates of withdrawal of the references of harmonised standards concerned published by that Communication. |
(12) |
Compliance with a harmonised standard confers a presumption of conformity with the corresponding essential requirements set out in Union harmonisation legislation from the date of publication of the reference of such standard in the Official Journal of the European Union. This Decision should therefore enter into force on the date of its publication, |
HAS ADOPTED THIS DECISION:
Article 1
The references of harmonised standards for equipment and protective systems intended for use in potentially explosive atmospheres in support of Directive 2014/34/EU, listed in Annex I to this Decision, are hereby published in the Official Journal of the European Union.
Article 2
Implementing Decision (EU) 2019/1202 is repealed.
Article 3
Communication 2018/C 371/01 is repealed. However, it shall continue to apply in respect of the references of harmonised standards listed in Annex II to this Decision until the dates of withdrawal of those references.
Article 4
This Decision shall enter into force on the day of its publication in the Official Journal of the European Union.
Done at Brussels, 28 September 2022.
For the Commission
The President
Ursula VON DER LEYEN
(1) OJ L 316, 14.11.2012, p. 12.
(2) Directive 2014/34/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to equipment and protective systems intended for use in potentially explosive atmospheres (OJ L 96, 29.3.2014, p. 309).
(3) Directive 94/9/EC of the European Parliament and the Council of 23 March 1994 on the approximation of the laws of the Member States concerning equipment and protective systems intended for use in potentially explosive atmospheres (OJ L 100, 19.4.1994, p. 1).
(4) Commission communication in the framework of the implementation of Directive 2014/34/EU of the European Parliament and of the Council on the harmonisation of the laws of the Member States relating to equipment and protective systems intended for use in potentially explosive atmospheres (Publication of titles and references of harmonised standards under Union harmonisation legislation) (OJ C 371, 12.10.2018, p. 1).
(5) Commission Implementing Decision (EU) 2019/1202 of 12 July 2019 on the harmonised standards for equipment and protective systems intended for use in potentially explosive atmospheres drafted in support of Directive 2014/34/EU of the European Parliament and of the Council (OJ L 189, 15.7.2019, p. 71).
ANNEX I
No |
Reference of the standard |
1. |
EN 1010-1:2004+A1:2010 Safety of machinery – Safety requirements for the design and construction of printing and paper converting machines – Part 1: Common requirements |
2. |
EN 1010-2:2006+A1:2010 Safety of machinery – Safety requirements for the design and construction of printing and paper converting machines – Part 2: Printing and varnishing machines including pre-press machinery |
3. |
EN 1127-1:2019 Explosive atmospheres – Explosion prevention and protection – Part 1: Basic concepts and methodology |
4. |
EN 1127-2:2014 Explosive atmospheres – Explosion prevention and protection – Part 2: Basic concepts and methodology for mining |
5. |
EN 1755:2015 Industrial Trucks – Safety requirements and verification – Supplementary requirements for operation in potentially explosive atmospheres |
6. |
EN 1834-1:2000 Reciprocating internal combustion engines – Safety requirements for design and construction of engines for use in potentially explosive atmospheres – Part 1: Group II engines for use in flammable gas and vapour atmospheres |
7. |
EN 1834-2:2000 Reciprocating internal combustion engines – Safety requirements for design and construction of engines for use in potentially explosive atmospheres – Part 2: Group I engines for use in underground workings susceptible to firedamp and/or combustible dust |
8. |
EN 1834-3:2000 Reciprocating internal combustion engines – Safety requirements for design and construction of engines for use in potentially explosive atmospheres – Part 3: Group II engines for use in flammable dust atmospheres |
9. |
EN 1839:2017 Determination of the explosion limits and the limiting oxygen concentration (LOC) for flammable gases and vapours |
10. |
EN 1953:2013 Atomising and spraying equipment for coating materials – Safety requirements |
11. |
EN 12581:2005+A1:2010 Coating plants – Machinery for dip coating and electrodeposition of organic liquid coating material – Safety requirements |
12. |
EN 12621:2006+A1:2010 Machinery for the supply and circulation of coating materials under pressure – Safety requirements |
13. |
EN 12757-1:2005+A1:2010 Mixing machinery for coating materials – Safety requirements – Part 1: Mixing machinery for use in vehicle refinishing |
14. |
EN 13012:2021 Petrol filling stations – Construction and performance of automatic nozzles for use on fuel dispensers |
15. |
EN 13237:2012 Potentially explosive atmospheres – Terms and definitions for equipment and protective systems intended for use in potentially explosive atmospheres |
16. |
EN 13616-1:2016 Overfill prevention devices for static tanks for liquid fuels – Part 1: Overfill prevention devices with closure device |
17. |
EN 13617-1:2021 Petrol filling stations – Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units |
18. |
EN 13617-2:2021 Petrol filling stations – Part 2: Safety requirements for construction and performance of safe breaks for use on metering pumps and dispensers |
19. |
EN 13617-3:2021 Petrol filling stations – Part 3: Safety requirements for construction and performance of shear valves |
20. |
EN 13617-4:2021 Petrol filling stations – Part 4: Safety requirements for construction and performance of swivels for use on metering pumps and dispensers |
21. |
EN 13760:2021 LPG equipment and accessories – Automotive LPG filling system for light and heavy duty vehicles – Nozzle, test requirements and dimensions |
22. |
EN 13852-1:2013 Cranes – Offshore cranes – Part 1: General-purpose offshore cranes |
23. |
EN 13852-3:2021 Cranes – Offshore cranes – Part 3: Light offshore cranes Notice 1: The normative references referred to in clause 2 of harmonised standard EN IEC 60079-0:2018 shall be read as EN IEC 60079-0:2018 corrected by EN IEC 60079-0:2018/AC:2020-02 Notice 2: The normative references referred to in clause 2 of harmonised standard EN ISO 80079-36:2016 shall be read as EN ISO 80079-36:2016 corrected by EN ISO 80079-36:2016/AC:2019 Restriction: this publication does not cover the following part of the standard: column ‘Remarks/Notes’ of Table ZB.1 |
24. |
EN 14034-1:2004+A1:2011 Determination of explosion characteristics of dust clouds – Part 1: Determination of the maximum explosion pressure pmax of dust clouds |
25. |
EN 14034-2:2006+A1:2011 Determination of explosion characteristics of dust clouds – Part 2: Determination of the maximum rate of explosion pressure rise (dp/dt) max of dust clouds |
26. |
EN 14034-3:2006+A1:2011 Determination of explosion characteristics of dust clouds – Part 3: Determination of the lower explosion limit LEL of dust clouds |
27. |
EN 14034-4:2004+A1:2011 Determination of explosion characteristics of dust clouds – Part 4: Determination of the limiting oxygen concentration LOC of dust clouds |
28. |
EN 14373:2021 Explosion suppression systems |
29. |
EN 14460:2018 Explosion resistant equipment |
30. |
EN 14491:2012 Dust explosion venting protective systems |
31. |
EN 14492-1:2006+A1:2009 Cranes – Power driven winches and hoists – Part 1: Power driven winches EN 14492-1:2006+A1:2009/AC:2010 |
32. |
EN 14492-2:2006+A1:2009 Cranes – Power driven winches and hoists – Part 2: Power driven hoists EN 14492-2:2006+A1:2009/AC:2010 |
33. |
EN 14522:2005 Determination of the auto ignition temperature of gases and vapours |
34. |
EN 14591-1:2004 Explosion prevention and protection in underground mines – Protective systems – Part 1: 2-bar explosion proof ventilation structure EN 14591-1:2004/AC:2006 |
35. |
EN 14591-2:2007 Explosion prevention and protection in underground mines – Protective systems – Part 2: Passive water trough barriers EN 14591-2:2007/AC:2008 |
36. |
EN 14591-4:2007 Explosion prevention and protection in underground mines – Protective systems – Part 4: Automatic extinguishing systems for road headers EN 14591-4:2007/AC:2008 |
37. |
EN 14677:2008 Safety of machinery – Secondary steelmaking – Machinery and equipment for treatment of liquid steel |
38. |
EN 14678-1:2013 LPG equipment and accessories – Construction and performance of LPG equipment for automotive filling stations – Part 1: Dispensers |
39. |
EN 14681:2006+A1:2010 Safety of machinery – Safety requirements for machinery and equipment for production of steel by electric arc furnaces |
40. |
EN 14797:2006 Explosion venting devices |
41. |
EN 14973:2015 Conveyor belts for use in underground installations – Electrical and flammability safety requirements |
42. |
EN 14983:2007 Explosion prevention and protection in underground mines – Equipment and protective systems for firedamp drainage |
43. |
EN 14986:2017 Design of fans working in potentially explosive atmospheres |
44. |
EN 14994:2007 Gas explosion venting protective systems |
45. |
EN 15089:2009 Explosion isolation systems |
46. |
EN 15188:2020 Determination of the spontaneous ignition behaviour of dust accumulations |
47. |
EN 15198:2007 Methodology for the risk assessment of non-electrical equipment and components for intended use in potentially explosive atmospheres |
48. |
EN 15233:2007 Methodology for functional safety assessment of protective systems for potentially explosive atmospheres |
49. |
EN 15268:2008 Petrol filling stations – Safety requirements for the construction of submersible pump assemblies |
50. |
EN 15794:2009 Determination of explosion points of flammable liquids |
51. |
EN 15967:2022 Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapours |
52. |
EN 16009:2011 Flameless explosion venting devices |
53. |
EN 16020:2011 Explosion diverters |
54. |
EN 16447:2014 Explosion isolation flap valves |
55. |
EN ISO 16852:2016 Flame arresters – Performance requirements, test methods and limits for use (ISO 16852:2016) |
56. |
EN 17077:2018 Determination of burning behaviour of dust layers |
57. |
EN 50050-1:2013 Electrostatic hand-held spraying equipment – Safety requirements – Part 1: Hand-held spraying equipment for ignitable liquid coating materials |
58. |
EN 50050-2:2013 Electrostatic hand-held spraying equipment – Safety requirements – Part 2: Hand-held spraying equipment for ignitable coating powder |
59. |
EN 50050-3:2013 Electrostatic hand-held spraying equipment – Safety requirements – Part 3: Hand-held spraying equipment for ignitable flock |
60. |
EN 50104:2010 Electrical apparatus for the detection and measurement of oxygen – Performance requirements and test methods |
61. |
EN 50176:2009 Stationary electrostatic application equipment for ignitable liquid coating material – Safety requirements |
62. |
EN 50177:2009 Stationary electrostatic application equipment for ignitable coating powders – Safety requirements EN 50177:2009/A1:2012 |
63. |
EN 50223:2015 Stationary electrostatic application equipment for ignitable flock material – Safety requirements |
64. |
EN 50271:2018 Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen – Requirements and tests for apparatus using software and/or digital technologies |
65. |
EN 50281-2-1:1998 Electrical apparatus for use in the presence of combustible dust – Part 2-1: Test methods – Methods for determining the minimum ignition temperatures of dust EN 50281-2-1:1998/AC:1999 |
66. |
EN 50303:2000 Group I, Category M1 equipment intended to remain functional in atmospheres endangered by firedamp and/or coal dust |
67. |
EN 50381:2004 Transportable ventilated rooms with or without an internal source of release EN 50381:2004/AC:2005 |
68. |
EN 50495:2010 Safety devices required for the safe functioning of equipment with respect to explosion risks |
69. |
EN IEC 60079-0:2018 Explosive atmospheres – Part 0: Equipment – General requirements (IEC 60079-0:2017) |
70. |
EN 60079-1:2014 Explosive atmospheres – Part 1: Equipment protection by flameproof enclosures ‘d’ (IEC 60079-1:2014) |
71. |
EN 60079-2:2014 Explosive atmospheres – Part 2: Equipment protection by pressurized enclosure ‘p’ (IEC 60079-2:2014) EN 60079-2:2014/AC:2015 |
72. |
EN 60079-5:2015 Explosive atmospheres – Part 5: Equipment protection by powder filling ‘q’ (IEC 60079-5:2015) |
73. |
EN 60079-6:2015 Explosive atmospheres – Part 6: Equipment protection by liquid immersion ‘o’ (IEC 60079-6:2015) |
74. |
EN 60079-7:2015 Explosive atmospheres – Part 7: Equipment protection by increased safety ‘e’ (IEC 60079-7:2015) EN IEC 60079-7:2015/A1:2018 |
75. |
EN 60079-11:2012 Explosive atmospheres – Part 11: Equipment protection by intrinsic safety ‘i’ (IEC 60079-11:2011) |
76. |
EN 60079-15:2010 Explosive atmospheres – Part 15: Equipment protection by type of protection ‘n’ (IEC 60079-15:2010) |
77. |
EN 60079-18:2015 Explosive atmospheres – Part 18: Equipment protection by encapsulation ‘m’ (IEC 60079-18:2014) EN 60079-18:2015/A1:2017 |
78. |
EN 60079-20-1:2010 Explosive atmospheres – Part 20-1: Material characteristics for gas and vapour classification – Test methods and data (IEC 60079-20-1:2010) |
79. |
EN 60079-25:2010 Explosive atmospheres – Part 25: Intrinsically safe electrical systems (IEC 60079-25:2010) EN 60079-25:2010/AC:2013 |
80. |
EN 60079-26:2015 Explosive atmospheres – Part 26: Equipment with Equipment Protection Level (EPL) Ga (IEC 60079-26:2014) |
81. |
EN 60079-28:2015 Explosive atmospheres – Part 28: Protection of equipment and transmission systems using optical radiation (IEC 60079-28:2015) |
82. |
EN 60079-29-1:2016 Explosive atmospheres – Part 29-1: Gas detectors – Performance requirements of detectors for flammable gases (IEC 60079-29-1:2016, (Modified)) |
83. |
EN 60079-29-4:2010 Explosive atmospheres – Part 29-4: Gas detectors – Performance requirements of open path detectors for flammable gases (IEC 60079-29-4:2009, (Modified)) |
84. |
EN 60079-30-1:2017 Explosive atmospheres – Part 30-1: Electrical resistance trace heating – General and testing requirements (IEC/IEEE 60079-30-1:2015, (Modified)) |
85. |
EN 60079-31:2014 Explosive atmospheres – Part 31: Equipment dust ignition protection by enclosure ‘t’ (IEC 60079-31:2013) |
86. |
EN 60079-35-1:2011 Explosive atmospheres – Part 35-1: Caplights for use in mines susceptible to firedamp – General requirements – Construction and testing in relation to the risk of explosion (IEC 60079-35-1:2011) EN 60079-35-1:2011/AC:2011 |
87. |
EN ISO/IEC 80079-20-2:2016 Explosive atmospheres – Part 20-2: Material characteristics – Combustible dusts test methods (ISO/IEC 80079-20-2:2016) EN ISO/IEC 80079-20-2:2016/AC:2017 |
88. |
EN ISO/IEC 80079-34:2011 Explosive atmospheres – Part 34: Application of quality systems for equipment manufacture (ISO/IEC 80079-34:2011) |
89. |
EN ISO 80079-36:2016 Explosive atmospheres – Part 36: Non-electrical equipment for explosive atmospheres – Basic method and requirements (ISO 80079-36:2016) |
90. |
EN ISO 80079-37:2016 Explosive atmospheres – Part 37: Non-electrical equipment for explosive atmospheres – Non-electrical type of protection constructional safety ‘c’, control of ignition sources ‘b’, liquid immersion ‘k’ (ISO 80079-37:2016) |
91. |
EN ISO/IEC 80079-38:2016 Explosive atmospheres – Part 38: Equipment and components in explosive atmospheres in underground mines (ISO/IEC 80079-38:2016) EN ISO/IEC 80079-38:2016/A1:2018 |
ANNEX II
No |
Reference of the standard |
Date of withdrawal |
1. |
EN 13012:2012 Petrol filling stations – Construction and performance of automatic nozzles for use on fuel dispensers |
3.9.2023 |
2. |
EN 13617-1:2012 Petrol filling stations – Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units |
3.9.2023 |
3. |
EN 13617-2:2012 Petrol filling stations – Part 2: Safety requirements for construction and performance of safe breaks for use on metering pumps and dispensers |
3.9.2023 |
4. |
EN 13617-3:2012 Petrol filling stations – Part 3: Safety requirements for construction and performance of shear valves |
3.9.2023 |
5. |
EN 13617-4:2012 Petrol filling stations – Part 4: Safety requirements for construction and performance of swivels for use on metering pumps and dispensers |
3.9.2023 |
6. |
EN 13760:2003 Automotive LPG filling system for light and heavy duty vehicles – Nozzle, test requirements and dimensions |
19.11.2023 |
7. |
EN 14373:2005 Explosion suppression systems |
19.11.2023 |
8. |
EN 15188:2007 Determination of the spontaneous ignition behaviour of dust accumulations |
27.11.2022 |
9. |
EN 15967:2011 Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapours |
29.3.2024 |