EUR-Lex Access to European Union law
This document is an excerpt from the EUR-Lex website
Document 32019R0129
Regulation (EU) 2019/129 of the European Parliament and of the Council of 16 January 2019 amending Regulation (EU) No 168/2013 as regards the application of the Euro 5 step to the type-approval of two- or three-wheel vehicles and quadricycles
Regulation (EU) 2019/129 of the European Parliament and of the Council of 16 January 2019 amending Regulation (EU) No 168/2013 as regards the application of the Euro 5 step to the type-approval of two- or three-wheel vehicles and quadricycles
Regulation (EU) 2019/129 of the European Parliament and of the Council of 16 January 2019 amending Regulation (EU) No 168/2013 as regards the application of the Euro 5 step to the type-approval of two- or three-wheel vehicles and quadricycles
PE/65/2018/REV/1
OJ L 30, 31/01/2019, p. 106–111
(BG, ES, CS, DA, DE, ET, EL, EN, FR, GA, HR, IT, LV, LT, HU, MT, NL, PL, PT, RO, SK, SL, FI, SV)
In force
Relation | Act | Comment | Subdivision concerned | From | To |
---|---|---|---|---|---|
Modifies | 32013R0168 | Repeal | annex II part C1 Text | 20/02/2019 | |
Modifies | 32013R0168 | Repeal | annex VI section B1 Text | 20/02/2019 | |
Modifies | 32013R0168 | Addition | annex IV table point 1.8.4 | 20/02/2019 | |
Modifies | 32013R0168 | Addition | annex IV table point 1.8.5 | 20/02/2019 | |
Modifies | 32013R0168 | Replacement | annex IV table point 1.1.2.1 | 20/02/2019 | |
Modifies | 32013R0168 | Replacement | annex IV table point 1.1.2.2 | 20/02/2019 | |
Modifies | 32013R0168 | Replacement | annex IV table point 1.1.2.3 | 20/02/2019 | |
Modifies | 32013R0168 | Replacement | annex IV table point 1.8.1 | 20/02/2019 | |
Modifies | 32013R0168 | Replacement | annex IV table point 1.8.2 | 20/02/2019 | |
Modifies | 32013R0168 | Replacement | annex IV table point 1.8.3 | 20/02/2019 | |
Modifies | 32013R0168 | Replacement | annex IV table point 1.9.1 | 20/02/2019 | |
Modifies | 32013R0168 | Replacement | annex IV table point 1.9.2 | 20/02/2019 | |
Modifies | 32013R0168 | Replacement | annex IV table point 1.9.4 | 20/02/2019 | |
Modifies | 32013R0168 | Replacement | annex V section B table column 1 TEXT | 20/02/2019 | |
Modifies | 32013R0168 | Replacement | annex VI section B2 Text | 20/02/2019 | |
Modifies | 32013R0168 | Replacement | article 21 | 20/02/2019 | |
Modifies | 32013R0168 | Replacement | article 23 paragraph 3 point (c) | 20/02/2019 | |
Modifies | 32013R0168 | Replacement | article 30 paragraph 1 point (b) | 20/02/2019 | |
Modifies | 32013R0168 | Replacement | article 44 paragraph 1 unnumbered paragraph 2 | 20/02/2019 | |
Modifies | 32013R0168 | Replacement | article 75 paragraph 2 | 20/02/2019 |
31.1.2019 |
EN |
Official Journal of the European Union |
L 30/106 |
REGULATION (EU) 2019/129 OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL
of 16 January 2019
amending Regulation (EU) No 168/2013 as regards the application of the Euro 5 step to the type-approval of two- or three-wheel vehicles and quadricycles
THE EUROPEAN PARLIAMENT AND THE COUNCIL OF THE EUROPEAN UNION,
Having regard to the Treaty on the Functioning of the European Union, and in particular Article 114 thereof,
Having regard to the proposal from the European Commission,
After transmission of the draft legislative act to the national parliaments,
Having regard to the opinion of the European Economic and Social Committee (1),
Acting in accordance with the ordinary legislative procedure (2),
Whereas:
(1) |
On the basis of the Commission report to the European Parliament and the Council on the comprehensive effect study of the environmental step Euro 5 for L-category vehicles (‘the effect study’) carried out under Article 23(4) of Regulation (EU) No 168/2013 of the European Parliament and of the Council (3) and taking into account issues encountered by approval authorities and stakeholders in applying that Regulation, certain changes and clarifications should be made in Regulation (EU) No 168/2013 in order to ensure its smooth application. |
(2) |
Regarding the requirement to install an on-board diagnostic (OBD) stage II system, which ensures the monitoring and reporting on the emission control system failures and degradation, the Commission concluded on the basis of the effect study that there are technical limitations with respect to catalyst monitoring for certain vehicles and that further development is required to ensure its correct implementation. Catalyst monitoring is not expected to be ready for the first round of the Euro 5 emission step, but is envisaged for 2025. Article 21 of Regulation (EU) No 168/2013 should therefore provide for the lead time needed to ensure the correct implementation of the OBD stage II system requirement. |
(3) |
Given that vehicles of categories L1e and L2e are already excluded from the requirement to be equipped with an OBD stage I system, the vehicles of category L6e, which are designed and built around moped specifications and produced in rather small volumes, should also be exempted from that requirement. |
(4) |
It is necessary to clarify the exemption for vehicles of categories L1e and L2e from the requirement to be equipped with an OBD stage II system and to extend that exemption to light quadricycles (L6e category) and to the enduro (L3e-AxE) and trial (L3e-AxT) motorcycle subcategories. |
(5) |
Enduro and trial motorcycles have a short lifespan and are very similar in nature and use to heavy all-terrain quad (L7e-B) which are exempted from the requirement to be equipped with an OBD stage II system. That exemption should therefore be extended to enduro and trial motorcycles. |
(6) |
The Commission concluded in the effect study that the mathematical durability procedure set out in point (c) of Article 23(3) of Regulation (EU) No 168/2013, whereby vehicles are tested after 100 km of use, does not reflect the real degradation of the emission control system of a vehicle during its lifetime. That method should no longer be used and should be phased out by 2025 to provide sufficient lead time to stakeholders to adapt. For the period until 2025, the required accumulated distance travelled by the vehicle before it is tested should be raised to ensure that the test results are reliable. |
(7) |
The technology that is necessary to meet the Euro 5 limits is already available. However the Commission concluded in the effect study, that the date of application of the Euro 5 emission limits for certain L-category vehicles (L6e-B, L2e-U, L3e-AxT and L3e-AxE) will need to be postponed from 2020 to 2024 to increase the cost-benefit ratio compared to the base line. In addition, manufacturers of those vehicles, which are mainly SMEs, require more lead time to ensure that the transition towards zero emission powertrains, such as electrification, can be achieved in a cost effective way. |
(8) |
Article 30 of Regulation (EU) No 168/2013 requires that an EU type-approval certificate contains, as an attachment, the test results. In the interests of clarity, that provision should be amended in order to make clear that what is being referred to is the test results sheet. |
(9) |
Certain inconsistencies in the date of application of the sound level limits for Euro 5 in Annex IV to Regulation (EU) No 168/2013 should be clarified to ensure that the existing limits (Euro 4) remain applicable until the new limits for Euro 5 can be established. |
(10) |
Regulation (EU) No 168/2013 empowered the Commission to adopt delegated acts for a period of five years, which expired on 21 March 2018. As there is a continuous need to update elements of the type-approval legislation to technical progress or to introduce other amendments in line with the empowerments, that Regulation should be amended to provide for the extension of the delegation for another five years with the possibility of tacit extension. |
(11) |
In the interest of legal certainty, the empowerment in Regulation (EU) No 168/2013 for the Commission to adopt delegated acts concerning the technical requirements related to on-board diagnostics should be made clearer and more precise. |
(12) |
Since this Regulation amends Regulation (EU) No 168/2013 without expanding its regulatory content and since the objectives of this Regulation cannot be sufficiently achieved by the Member States but can rather, by reason of its scale and effects, be better achieved at Union level, the Union may adopt measures, in accordance with the principle of subsidiarity as set out in Article 5 of the Treaty on European Union. In accordance with the principle of proportionality as set out in that Article, this Regulation does not go beyond what is necessary in order to achieve those objectives. |
(13) |
Regulation (EU) No 168/2013 should therefore be amended accordingly, |
HAVE ADOPTED THIS REGULATION:
Article 1
Regulation (EU) No 168/2013 is amended as follows:
(1) |
Article 21 is replaced by the following: ‘Article 21 General requirements of on-board diagnostic systems 1. L-category vehicles, with the exception of L1e, L2e and L6e vehicles, shall be equipped with an OBD system which complies with the functional requirements and test procedures laid down in the delegated acts referred to in paragraph 8 and as from the application dates set out in Annex IV. 2. From the dates set out in point 1.8.1 of Annex IV, vehicle categories and subcategories L3e, L4e, L5e-A and L7e-A shall be equipped with an OBD stage I system which monitors any electric circuit and electronics failure of the emission control system and reports those failures which result in the emission thresholds laid down in Annex VI (B1) being exceeded. 3. From the dates set out in point 1.8.2 of Annex IV, vehicle categories and subcategories L3e, L4e, L5e and L7e shall be equipped with an OBD stage I system which monitors any electric circuit and electronics failure of the emission control system and which triggers a report when the emission thresholds laid down in Annex VI (B1) are exceeded. OBD stage I systems for those vehicle categories and subcategories shall also report the triggering of any operating mode which significantly reduces engine torque. 4. From the dates set out in point 1.8.3 of Annex IV, vehicle categories L3e, L4e, L5e and L7e shall be equipped with an OBD stage I system which monitors any electric circuit and electronics failure of the emission control system and which triggers a report when the emission thresholds laid down in Annex VI (B2) are exceeded. OBD stage I systems for those vehicle categories shall also report the triggering of any operating mode which significantly reduces engine torque. 5. From the dates set out in point 1.8.4 of Annex IV, vehicle categories and subcategories L3e, L4e, L5e-A and L7e-A shall in addition be equipped with an OBD stage II system which monitors and reports emission control system failures and degradation, with the exception of catalyst monitoring, which result in the OBD emission thresholds laid down in Annex VI (B1) being exceeded. 6. From the dates set out in point 1.8.5 of Annex IV, vehicle categories and subcategories L3e, L4e, L5e-A and L7e-A shall in addition be equipped with an OBD stage II system which monitors and reports emission control system failures and degradation which result in the OBD emission thresholds laid down in Annex VI (B2) being exceeded. 7. Paragraphs 5 and 6 shall not apply to enduro motorcycles in subcategory L3e-AxE and trial motorcycles in subcategory L3e-AxT. 8. In order to harmonise the OBD system reporting of functional safety or emission control system faults and facilitate effective and efficient repair of a vehicle, the Commission is empowered to adopt delegated acts in accordance with Article 75 supplementing this Regulation by laying down the detailed technical requirements related to on-board diagnostics with respect to vehicle categories and subcategories as set out in Annex II, C1 – Vehicle construction and general type-approval requirements, the row relating to No 11, including functional OBD requirements and test procedures for the subjects listed in paragraphs 1 to 7 of this Article, and the detailed technical requirements related to test type VIII referred to in Annex V.’; |
(2) |
in Article 23(3), point (c) is replaced by the following:
|
(3) |
in Article 30(1), point (b) is replaced by the following:
|
(4) |
in Article 44(1), the second subparagraph is replaced by the following: ‘The first subparagraph shall apply only to vehicles within the territory of the Union which were covered by a valid EU type-approval at the time of their production, but which neither were registered nor entered into service before that EU type-approval lost its validity.’; |
(5) |
Article 75(2) is replaced by the following: ‘2. The power to adopt delegated acts referred to in Article 18(3), Article 20(2), Article 21(8), Article 22(5) and (6), Article 23(6) and (12), Article 24(3), Article 25(8), Article 32(6), Article 33(6), Article 50(4), Article 54(3), Article 57(12), Article 65 and Article 74 shall be conferred on the Commission for a period of five years from 22 March 2013. The delegation of power shall be tacitly extended for periods of five years, unless the European Parliament or the Council opposes such extension not later than three months before the end of each period. The Commission shall draw up a report in respect of the delegation of power not later than 22 June 2022 and nine months before the end of each following five-year period.’; |
(6) |
Annexes II, IV, V and VI are amended in accordance with the Annex to this Regulation. |
Article 2
This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.
This Regulation shall be binding in its entirety and directly applicable in all Member States.
Done at Strasbourg, 16 January 2019.
For the European Parliament
The President
A. TAJANI
For the Council
The President
G. CIAMBA
(1) OJ C 367, 10.10.2018, p. 32.
(2) Position of the European Parliament of 29 November 2018 (not yet published in the Official Journal) and Decision of the Council of 17 December 2018.
(3) Regulation (EU) No 168/2013 of the European Parliament and of the Council of 15 January 2013 on the approval and market surveillance of two- or three-wheel vehicles and quadricycles (OJ L 60, 2.3.2013, p. 52).
ANNEX
Annexes II, IV, V and VI to Regulation (EU) No 168/2013 are amended as follows:
(1) |
in Annex II, section C1, in the row relating to No 11, the sign ‘X’ is deleted for subcategories L6e-A and L6e-B; |
(2) |
in Annex IV, the table is amended as follows:
|
(3) |
in Annex V, section B, the content of the cell in the first column, second row, is replaced by the following: ‘Type I test (19) Particulate mass (Euro 5 only)’; |
(4) |
Annex VI is amended as follows:
|