EUR-Lex Access to European Union law
This document is an excerpt from the EUR-Lex website
Document 01987A0813(01)-20171205
Convention on a Common transit procedure
Consolidated text: Convention on a Common transit procedure
Convention on a Common transit procedure
In force
ELI: http://data.europa.eu/eli/convention/1987/415/2017-12-05
01987A0813(01) — EN — 05.12.2017 — 005.001
This text is meant purely as a documentation tool and has no legal effect. The Union's institutions do not assume any liability for its contents. The authentic versions of the relevant acts, including their preambles, are those published in the Official Journal of the European Union and available in EUR-Lex. Those official texts are directly accessible through the links embedded in this document
|
CONVENTION ON A COMMON TRANSIT PROCEDURE (OJ L 226 13.8.1987, p. 2) |
Amended by:
Corrected by:
CONVENTION ON A COMMON TRANSIT PROCEDURE
THE REPUBLIC OF AUSTRIA, THE REPUBLIC OF FINLAND, THE REPUBLIC OF ICELAND, THE KINGDOM OF NORWAY, THE KINGDOM OF SWEDEN, THE SWISS CONFEDERATION,
hereinafter called the EFTA countries,
THE EUROPEAN ECONOMIC COMMUNITY,
hereinafter called the Community,
CONSIDERING the Free Trade Agreements between the Community and each of the EFTA countries,
CONSIDERING the Joint Declaration calling for the creation of a European economic space, adopted by Ministers of the EFTA countries and the Member States of the Community and the Commission of the European Communities in Luxembourg on 9 April 1984, especially with regard to simplification of border formalities and rules of origin,
CONSIDERING the Convention on the simplification of formalities in trade in goods, concluded between the EFTA countries and the Community, introducing a single administrative document for use in such trade,
CONSIDERING that the use of this single document within the framework of a common transit procedure for the carriage of goods between the Community and the EFTA countries and between the EFTA countries themselves would lead to simplification,
CONSIDERING that the most appropriate way of achieving this aim would be to extend to those EFTA countries which do not apply it the transit procedure which currently applies to the carriage of goods within the Community, between the Community and Austria and Switzerland, and between Austria and Switzerland,
CONSIDERING also the Nordic transit order applied between Finland, Norway and Sweden,
HAVE DECIDED to conclude the following Convention:
General provisions
Article 1
Article 2
The T2 procedure shall apply to goods carried in accordance with Article 1, paragraph 1:
in the Community:
only when the goods are Union goods. ‘Union goods’ shall mean goods which fall into any of the following categories:
in a common transit country:
Only when the goods have arrived in that country under the T2 procedure and are reconsigned under the special conditions laid down in Article 9 below.
Article 3
For the purposes of this Convention, the term:
‘transit’ shall mean a procedure under which goods are carried under the control of the competent authorities from one Contracting Party to another Contracting Party or to the same Contracting Party over at least one frontier;
‘country’ shall mean any common transit country, any Member State of the Community, or any other State which has acceded to this Convention;
‘third country’ shall mean any State which is not Contracting Party to this Convention;
‘common transit country’ shall mean any country, other than a Member State of the Community, that is a Contracting Party to this Convention.
▼M38 —————
Article 4
This Convention shall be without prejudice also to:
movements of goods under a temporary admission procedure;
and
agreements concerning frontier traffic.
Article 5
In the absence of an agreement between the Contracting Parties and a third country whereby goods moving between the Contracting Parties may be carried across that third country under the T1 or T2 procedure, such a procedure shall apply to goods carried across that third country only if the carriage across that country is effected under cover of a single transport document drawn up in the territory of a Contracting Party and the operation of that procedure is suspended in the territory of the third country.
Article 6
Provided that the implementation of any measures applicable to the goods is ensured, countries may, within the T1 or T2 procedure, introduce among themselves simplified procedures, by means of bilateral or multilateral agreements, which shall conform to criteria to be laid down, where necessary, in ►M21 Appendix I ◄ and which shall be applicable to certain types of traffic or to designated undertakings.
Such agreements shall be communicated to the Commission of the European Communities and to the other countries.
Implementation of the transit procedure
Article 7
Article 8
No addition, removal or substitution may be made in the case of goods forwarded under cover of a T1 or T2 ►M21 procedure ◄ , in particular when consignments are split up, transhipped or bulked.
Article 9
This provision shall, however, not apply to goods which are admitted temporarily to be shown at an exhibition, fair or similar public display and which have received no treatment other than that needed for their preservation in their original state or for splitting up consignments.
Where goods are reconsigned ►M38 from a common transit country ◄ after storage under a warehousing procedure, the T2 procedure may be applied only on the following conditions:
Article 10
The provisions of paragraph 1 shall not prejudice the right:
of Contracting Parties to agree among themselves that the guarantee shall be waived for T1 or T2 operations involving only their territories;
of a Contracting Party not to require a guarantee for the part of a T1 or T2 operation between the office of departure and the first office of transit.
▼M21 —————
Article 11
The customs office of departure shall consider means of transport and containers to be suitable for sealing on the following conditions:
seals can be simply and effectively affixed to the means of transport or the container;
the means of transport or the container is so constructed that when goods are removed or introduced, the removal or introduction leaves visible traces, the seals are broken or show signs of tampering, or an electronic monitoring system registers the removal or introduction;
the means of transport or the container contains no concealed spaces where goods may be hidden;
the spaces reserved for the goods are readily accessible for inspection by the customs authorities.
Article 12
▼M38 —————
Administrative assistance
Article 13
Furthermore, where necessary, they shall communicate to one another all findings relating to goods in respect of which mutual assistance is provided for and which have been subject to a customs warehousing procedure.
Where irregularities or infringements are suspected in connection with goods which have been brought into one country from another country or have passed through a country or have been stored under a warehousing procedure, the competent authorities of the countries concerned shall on request communicate to one another all information concerning:
the conditions under which those goods were carried:
the conditions of any warehousing of those goods where they arrived in the country to which the request is addressed under cover ►M21 of a T2 procedure ◄ or a document certifying ►M38 the customs status of Union goods ◄ or where they were reconsigned from that country under cover ►M21 of a T2 procedure ◄ or a document certifying ►M38 the customs status of Union goods ◄ .
Recovery
Article 13 (a)
The competent authorities of the countries concerned shall, in accordance with the provisions of Appendix IV, render each other assistance for the recovery of claims, if these claims have arisen in connection with a T1 or T2 operation.
The Joint Committee
Article 14
Article 15
In particular it shall recommend:
amendments to this Convention, other than those referred to in paragraph 3;
any other measure required for its application.
The Joint Committee shall adopt by decision:
amendments to the Appendices;
▼M21 —————
other amendments to this Convention made necessary by amendments to the Appendices;
▼M17 —————
transitional measures required in the case of the accession of new Member States to the Community;
invitations to third countries within the meaning of Article 3 (1) (c) to accede to this Convention in accordance with Article 15a.
Decisions taken under points (a) to (d) shall be put into effect by the Contracting Parties in accordance with their own legislation.
Accession of third countries
Article 15a
A declaration accepting such acts shall be inserted either in the instrument of accession or in a separate instrument lodged with the General Secretariat of the Council of the European Communities within six months of the communication. If the declaration is not lodged within that period the accession shall be considered void.
Miscellaneous and final provisions
Article 16
Each Contracting Party shall take appropriate measures to ensure that the provisions of this Convention are effectively and harmoniously applied, taking into account the need to reduce as far as possible the formalities imposed on operators and the need to achieve mutually satisfactory solutions of any difficulties arising out of the operation of those provisions.
Article 17
The Contracting Parties shall keep each other informed of the provisions which they adopt for the implementation of this Convention.
Article 18
The provisions of this Convention shall not preclude prohibitions or restrictions on the importation, exportation or transit of goods enacted by the Contracting Parties or by Member States of the Community and justified on grounds of public morality, public policy or public security, the protection of health and life of humans, animals or plants, the protection of national treasures possessing artistic, historical or archaeological value, or the protection of industrial or commercial property.
Article 19
The Appendices to this Convention shall form an integral part thereof.
Article 20
Article 21
Any Contracting Party may withdraw from this Convention provided it gives 12 months’ notice in writing to the depositary, which shall notify all other Contracting Parties.
Article 22
Article 23
Article 24
This Convention, which is drawn up in a single copy in the Danish, Dutch, English, French, German, Greek, Italian, Portuguese, Spanish, Finnish, Icelandic, Norwegian and Swedish languages, all texts being equally authentic, shall be deposited in the archives of the Secretariat of the Council of the European Communities, which shall deliver a certified copy thereof to each Contracting Party.
Done at Interlaken, 20 May 1987.
APPENDIX I
COMMON TRANSIT PROCEDURES
TITLE I
GENERAL PROVISIONS
CHAPTER I
Subject matter and scope of the procedure and definitions
Article 1
Subject matter
Article 2
Non-application of the common transit procedure to postal consignments
The common transit procedure shall not apply to postal consignments (including postal packages) carried in accordance with the acts of the Universal Postal Union, when the goods are carried by or for holders of rights and obligations under those acts.
Article 3
Definitions
For the purposes of the Convention the following definitions apply:
‘customs authorities’ means the customs administrations responsible for applying the Convention and any other authorities empowered under national law to apply the Convention;
‘person’ means a natural person, a legal person, and any association of persons which is not a legal person but which is recognised under the Union law, national law or the law of a common transit country as having capacity to perform legal acts;
‘transit declaration’ means the act whereby a person indicates in the prescribed form and manner a wish to place goods under the common transit procedure;
‘transit accompanying document’ means document printed using electronic data-processing techniques to accompany the goods and based on the particulars of the transit declaration;
‘declarant’ means the person lodging a transit declaration in his own name or the person in whose name such a declaration is lodged;
‘holder of the procedure’ means the person who lodges the transit declaration, or on whose behalf that declaration is lodged;
‘customs office of departure’ means the customs office where a transit declaration is accepted;
‘customs office of transit’ means the customs office competent for the point of entry into the customs territory of a Contracting Party when the goods move under the common transit procedure, or the customs office competent for the point of exit from the customs territory of a Contracting Party when the goods are leaving that territory in the course of a transit operation via a frontier between that Contracting Party and a third country;
‘customs office of destination’ means the customs office where goods placed under the common transit procedure are presented in order to end the procedure;
‘Master Reference Number (MRN)’ means the registration number allocated to a transit declaration by the competent customs authority using electronic data processing techniques;
‘customs office of guarantee’ means the customs office where the customs authorities of each country decide that guarantees are to be lodged;
‘debt’ means the obligation on a person to pay the amount of import or export duties and other charges due in respect of goods placed under the common transit procedure;
‘debtor’ means any person liable for a debt;
‘release of goods’ means the act whereby the customs authorities make goods available for the purposes specified for the common transit procedure under which they are placed;
‘person established in the customs territory of a Contracting Party’ means:
‘electronic data-processing techniques’ means electronic information exchange between economic operators and customs authorities, among customs authorities and between customs authorities and other involved governmental or European or common transit countries' agencies or institutions in an agreed and defined format with a purpose of automated processing and storage of the data after reception using any of the following means:
electronic data interchange;
computer-to-computer interchange;
electronic transfer of structured data by standard messages or services from one electronic processing environment to another without human intervention;
online introduction of data into customs data-processing systems for storage and processing resulting in online responses;
‘electronic data interchange’ (‘EDI’) means an electronic transmission of data, structured in accordance with agreed message standards, between two computer systems;
‘electronic transit system’ means electronic system used for the electronic data interchange of the common transit procedure;
‘standard message’ means a predefined structure for the electronic transmission of data;
‘personal data’ means any information relating to an identified or identifiable person;
‘fixed transport installation’ means technical means (e.g. pipelines and electric power lines) used for continuous transport of goods;
‘business continuity procedure’ means procedure based on the use of paper documents, established to allow the lodging of the transit declaration and follow-up of the transit operation where it is not possible to use the procedure based on electronic data-processing techniques.
CHAPTER II
General provisions on the common transit procedure
Article 4
Electronic system relating to the procedure
In agreement with each other, the Contracting Parties shall adopt measures for the application of the electronic transit system laying down the following:
the rules defining and governing the messages to be exchanged between customs offices, as required for the application of the customs legislation;
a common data set and the format of the data messages to be exchanged under the customs legislation.
Article 5
Use of the electronic transit system
The financial participation of the common transit countries, access by the common transit countries to the CCN/CSI and other related issues shall be agreed between the Union and each of the common transit countries.
Article 6
Security of data
The original data or any processed data shall be kept for at least three calendar years from the end of the year in which such data was recorded, or for longer if so required by the countries.
Article 7
Protection of personal data
This restriction shall not prevent the use of such data by the customs authorities for the purposes of risk analysis and investigations during the common transit procedure and for legal proceedings arising out of this common transit procedure. Where that data is used for those purposes, the customs authorities which supplied the information shall be notified immediately.
CHAPTER III
Obligations of the holder of the procedure and of the carrier and the recipient of goods moving under the common transit procedure
Article 8
Obligations of the holder of the procedure and of the carrier and the recipient of goods moving under the common transit procedure
The holder of the procedure shall be responsible for all of the following:
presentation of the goods intact and the necessary information at the customs office of destination, within the prescribed time-limit and in compliance with the measures taken by the customs authorities to ensure their identification;
observance of the customs provisions relating to the common transit procedure;
unless otherwise provided for in the Convention, provision of a guarantee in order to ensure payment of the amount of the debt, which may be incurred in respect of the goods.
CHAPTER IV
Guarantees
Article 9
Electronic system relating to guarantees
For the exchange and storage of information pertaining to guarantees, electronic data-processing techniques shall be used.
Article 10
Obligation to provide a guarantee
The guarantee shall be provided as either:
an individual guarantee covering a single operation; or
a comprehensive guarantee covering several operations in the form of an undertaking given by a guarantor, where a simplification provided for in ►M39 Article 55(1)(a) ◄ applies.
Article 11
Forms of the individual guarantee
The individual guarantee may be provided in one of the following forms:
by a cash deposit;
by an undertaking given by a guarantor;
by vouchers.
Article 12
Guarantor
The guarantor shall indicate in his undertaking an address for service or appoint an agent in each country of the Contracting Parties involved in the common transit operation.
Article 13
Guarantee Waiver
No guarantee shall be required in any of the following situations:
goods carried by air where the transit procedure based on an electronic manifest for goods carried by air or where the transit procedure based on an electronic transport document as transit declaration for air transport are used;
goods carried on the Rhine, the Rhine waterways, the Danube or the Danube waterways;
goods carried by fixed transport installation;
goods carried by rail or air where the paper-based transit procedure for goods carried by rail or air is used.
CHAPTER V
Miscellaneous provisions
Article 14
Legal status of documents and records
Article 15
List of customs offices competent to deal with common transit operations
Each country shall enter in the computerised system maintained by the European Commission (‘the Commission’) the list of customs offices competent to deal with common transit operations, indicating their respective identification numbers and duties and stating the days and hours when they are open. Any changes shall also be entered in the computerised system.
The Commission shall use that computerised system to communicate this information to the other countries.
Article 16
Central office
Where a country has established a central office assigned for the management and monitoring of the common transit procedure and the receipt and transmission of documents related to that procedure, it shall notify the Commission of any such office.
The Commission shall forward this information to the other countries.
Article 17
Offences and penalties
Countries shall take whatever steps are necessary to deal with any offence or irregularity and impose effective, proportionate and dissuasive penalties.
TITLE II
OPERATION OF THE PROCEDURE
CHAPTER I
Individual guarantee
Article 18
Calculation of the amount of the individual guarantee
An individual guarantee provided in accordance with Article 10(2)(a) shall cover the amount of the debt which may be incurred, calculated on the basis of the highest rates of duty applicable to goods of the same type. For the purpose of that calculation, Union goods carried in accordance with the Convention shall be treated as non-Union goods.
Article 19
Individual guarantee in the form of a cash deposit
Article 20
Individual guarantee in the form of an undertaking by a guarantor
For each undertaking, the customs office of guarantee shall communicate to the holder of the procedure the following information:
a guarantee reference number;
an access code associated with the guarantee reference number.
The holder of the procedure shall not modify that access code.
Article 21
Individual guarantee in the form of vouchers
Article 20(2) shall be applicable mutatis mutandis.
Each voucher shall cover an amount of EUR 10 000 for which the guarantor shall be liable. The period of validity of a voucher shall be one year from the date of issue.
For each voucher, the guarantor shall communicate to the person who intends to be the holder of the procedure the following information:
a guarantee reference number;
an access code associated with the guarantee reference number.
The person who intends to be the holder of the procedure shall not modify that access code.
Article 22
Approval of the undertaking
The undertaking given by a guarantor shall be approved by the customs office of guarantee which shall notify the approval to the person required to provide the guarantee.
Article 23
Revocation of the approval of the guarantor or of the undertaking and cancellation of the undertaking
The revocation of the approval of the guarantor or of the undertaking of the guarantor shall take effect on the sixteenth day following the date on which the decision on the revocation is received or is deemed to have been received by the guarantor.
The cancellation of the undertaking of the guarantor shall not affect goods which, at the moment where the cancellation takes effect, have already been placed and still are under a common transit procedure by virtue of the cancelled undertaking.
The cancellation of the undertaking by the guarantor shall take effect on the sixteenth day following the date on which the cancellation is notified by the guarantor to the customs office of guarantee.
CHAPTER II
Means of transport and declarations
Article 24
Transit declaration and means of transport
However, one transit declaration may include goods moved or to be moved from one customs office of departure to one customs office of destination in more than one container or in more than one package where the containers or packages are loaded on a single means of transport.
For the purposes of this Article, the following shall be regarded as constituting a single means of transport, provided that the goods carried are dispatched together:
a road vehicle accompanied by its trailer(s) or semi-trailer(s);
a set of coupled railway carriages or wagons;
boats constituting a single chain.
Article 25
Transit declarations by means of electronic data-processing techniques
The particulars and the structure of the data of the transit declaration are set out in Annexes A1, A2 and B6 to Appendix III.
As of the dates of deployment of the upgrading of the New Computerised Transit System (‘NCTS’) referred to in the Annex to Commission Implementing Decision (EU) 2016/578 ( 2 ) the particulars and the structure of the data of the transit declaration set out in Annexes A1a and B6a to Appendix III shall apply.
Article 26
Paper-based transit declarations
The customs authority shall accept a paper-based transit declaration in the following cases:
where goods are transported by travellers who have no direct access to the electronic transit system, according to the methods described in the Article 27;
where the business continuity procedure is applied in accordance with Annex II, in the event of a temporary failure of:
the electronic transit system;
the computerised system used by the holders of the procedure for lodging the common transit declaration by means of electronic data-processing techniques;
the electronic connection between the computerised system used by the holders of the procedure for lodging the common transit declaration by means of electronic data-processing techniques and the electronic transit system;
where a common transit country so decides.
Article 27
Transit declaration for travellers
In the cases referred to in Article 26(1)(a), the traveller shall draw up the paper-based transit declaration in accordance with Articles 5 and 6 and Annex B6 to Appendix III.
As of the dates of deployment of the upgrading of the NCTS referred to in the Annex to Implementing Decision (EU) 2016/578, in the cases referred to in Article 26(1)(a), the traveller shall draw up the paper-based transit declaration in accordance with Articles 5 and 6 and Annex B6a to Appendix III.
Article 28
Mixed consignments
A consignment may comprise both goods which are to be placed under the T1 procedure and goods which are to be placed under the T2 procedure, provided that each item of the goods is marked accordingly in the transit declaration with the codes ‘T1’, ‘T2’ or ‘T2F’.
Article 29
Authentication of the transit declaration and responsibility of the holder of the procedure
Lodging of a transit declaration by the holder of the procedure to the customs authorities shall render that holder responsible for all of the following:
the accuracy and completeness of the information given in the transit declaration;
the authenticity, accuracy and validity of any document supporting the transit declaration;
compliance with all the obligations relating to the placing of the goods under the common transit procedure stated in the transit declaration.
Article 29a
Lodging a transit declaration prior to the presentation of the goods
As of the dates of deployment of the upgrading of the NCTS referred to in the Annex to Implementing Decision (EU) 2016/578, a transit declaration may be lodged prior to the expected presentation of the goods to the customs office of departure. If the goods are not presented within 30 days of lodging of the transit declaration, that declaration shall be deemed not to have been lodged.
CHAPTER III
Formalities at the customs office of departure
Article 30
Lodging and acceptance of a transit declaration
That customs office of departure shall accept the transit declaration provided that the following conditions are met:
it contains all the data necessary for the purposes of the common transit procedure as specified in Annex II to Appendix III;
it is accompanied by all the necessary documents;
the goods to which the transit declaration refers have been presented to customs during the official opening hours.
The customs office of departure may, at the request of the declarant, allow the goods to be presented outside the official opening hours or at any other place.
Article 31
Amendment of a transit declaration
No such amendment shall be permitted where it is applied for after any of the following events:
the customs authorities have informed the declarant that they intend to examine the goods;
the customs authorities have established that the particulars of the customs declaration are incorrect;
the customs authorities have released the goods.
Article 32
Invalidation of a transit declaration
The customs office of departure shall, upon application by the declarant, invalidate a transit declaration already accepted in either of the following cases:
where it is satisfied that the goods are immediately to be placed under another customs procedure;
where it is satisfied that, as a result of special circumstances, the placing of the goods under the customs procedure for which they were declared is no longer justified.
However, where the customs office of departure has informed the declarant of their intention to examine the goods, an application for invalidation of the customs declaration shall not be accepted before the examination has taken place.
The transit declaration shall not be invalidated after the goods have been released unless where:
goods in free circulation in a Contracting Party have been declared in error for a common transit procedure and their customs status as goods being in free circulation in the same Contracting Party has been proved afterwards;
the goods have been erroneously declared under more than one customs declaration.
Article 33
Itinerary for movements under common transit
When prescribing an itinerary, the customs office shall enter in the electronic transit system at least the indication of the countries through which the transit is to take place.
Article 34
Time-limit for the presentation of goods
The customs office of departure shall set a time-limit within which the goods shall be presented at the customs office of destination, taking into account the following:
the itinerary;
the means of transport;
transport legislation or other legislation which might have an impact on setting a time-limit;
any relevant information communicated by the holder of the procedure.
Article 35
Verification of a transit declaration and the examination of the goods
The customs office of departure may, for the purpose of verifying the accuracy of the particulars contained in a transit declaration which has been accepted:
examine the declaration and the supporting documents;
require the declarant to provide other documents;
examine the goods;
take samples for analysis or for detailed examination of the goods.
Article 36
Identification of seals
The customs office of departure shall record the number of the seals affixed by that customs office and the individual seal identifiers, in the electronic transit system.
Article 37
Suitability for sealing
Road vehicles, trailers, semi-trailers and containers approved for the carriage of goods under customs seal in accordance with an international agreement to which the Union and the common transit countries are contracting parties shall also be regarded as suitable for sealing.
Article 38
Characteristics of customs seals
Customs seals shall have at least the following essential characteristics and comply with the following technical specifications:
essential characteristics of the seals:
remaining intact and securely fastened in normal use;
being easily checkable and recognisable;
being so manufactured that any breakage, tampering or removal leaves traces visible to the naked eye;
being designed for single use or, if intended for multiple use, being so designed that they can be given a clear, individual identification mark each time they are re-used;
bearing of individual seal identifiers which are permanent, readily legible and uniquely numbered;
technical specifications:
the form and dimensions of seals may vary with the sealing method used but the dimensions shall be such as to ensure that identification marks are easy to read;
the identification marks of seals shall be impossible to falsify and difficult to reproduce;
the material used shall be resistant to accidental breakage and such as to prevent undetectable falsification or reuse.
For containerised transports, seals with high-security features shall be used to the greatest extent possible.
The customs seal shall bear the following indications:
the word ‘Customs’ in one of the official languages of the Union or of the common transit countries or a corresponding abbreviation;
a country code, in the form of the ISO-alpha-2 country code, identifying the country in which the seal is affixed.
The Contracting Parties may in agreement with each other decide to use common security features and technology.
Article 39
Alternative identification measures to sealing
By way of derogation from Article 11(1) of the Convention, unless the customs office of departure decides otherwise, neither the means of transport nor the individual packages containing the goods shall be sealed where:
the goods are carried by air, and either labels are affixed to each consignment bearing the number of the accompanying airway bill, or the consignment constitutes a load unit on which the number of the accompanying airway bill is indicated;
the goods are carried by rail, and identification measures are applied by the railway companies.
Article 40
Release of goods for the common transit procedure
On release of the goods, the customs office of departure shall transmit the particulars of the common transit operation:
to the declared customs office of destination;
to each declared customs office of transit.
Those particulars shall be based on data derived from the transit declaration, as amended where appropriate.
Article 41
Transit accompanying document and List of items
The transit accompanying document shall be provided using the form set out in Annex A3a to Appendix III and shall include the particulars set out in Annex A4a to Appendix III. The List of items shall be provided using the form set out in Annex A5a to Appendix III and shall include the particulars set out in Annex A6a to Appendix III.
The transit accompanying document and the List of items shall be provided in printed form.
CHAPTER IV
Formalities during transport
Article 42
Presentation of the transit accompanying document
The transit accompanying document with the MRN of the transit declaration and other documents accompanying the goods shall be presented whenever the customs authorities so require.
Article 43
Presentation of goods moved under the common transit procedure at the customs office of transit
Article 44
Incidents during movement of goods under a common transit operation
The carrier shall be required to make the necessary entries in the transit accompanying document and present without undue delay after the incident the goods together with that document to the nearest customs authority of the country in whose territory the means of transport is located where:
the carrier is obliged to deviate from the itinerary prescribed in accordance with Article 33(2) due to circumstances beyond his control;
seals are broken or tampered with in the course of a transport operation for reasons beyond the carrier's control;
under the supervision of the customs authority, goods are transferred from one means of transport to another means of transport;
imminent danger necessitates immediate partial or total unloading of the sealed means of transport;
there is an incident which may affect the ability of the holder of the procedure or the carrier to comply with his obligations;
any of the elements constituting a single means of transport as referred to in Article 24(2) is changed.
Where the customs authorities in whose territory the means of transport is located consider that the common transit operation concerned may continue, once they have taken any steps that may be necessary, they shall endorse the entries made by the carrier in the transit accompanying document.
As of the dates of deployment of the upgrading of the NCTS referred to in the Annex to Implementing Decision (EU) 2016/578, the carrier shall present without undue delay after the incident the goods and the transit accompanying document with the MRN of the transit declaration to the nearest customs authority of the country in whose territory the means of transport is located in situation referred to in points (a) to (f) of the first subparagraph.
Where the customs authorities in whose territory the means of transport is located consider that the common transit operation concerned may continue, they shall take any steps that they consider necessary, and shall record relevant information concerning the incidents referred to in the first subparagraph of this paragraph in the electronic transit system referred to in Article 4.
The carrier shall not be required to present the goods and the transit accompanying document with the necessary entries made to the customs authority referred to in paragraph 1 in the following cases:
Incidents as referred to in paragraph 1(c), if the goods are transferred from a means of transport that is not sealed;
Incidents as referred to in paragraph 1(f), where one or more carriages or wagons are withdrawn from a set of coupled railway carriages or wagons due to technical problems;
Incidents as referred to in paragraph 1(f), where the tractor unit of a road vehicle is changed without its trailers or semi trailers being changed.
As of the dates of deployment of the upgrading of the NCTS referred to in the Annex to Implementing Decision (EU) 2016/578, the carrier shall not be required to present the goods and the transit accompanying document with the MRN of the transit declaration to the customs authority referred to in paragraph 1, provided that the holder of the procedure or the carrier on behalf of the holder of the procedure provides relevant information concerning the incident to that customs authority in the following cases:
Incidents as referred to in paragraph 1(c), if the goods are transferred from a means of transport that is not sealed;
Incidents as referred to in paragraph 1(f), where one or more carriages or wagons are withdrawn from a set of coupled railway carriages or wagons due to technical problems;
Incidents as referred to in paragraph 1(f), where the tractor unit of a road vehicle is changed without its trailers or semi-trailers being changed.
As of the dates of deployment of the upgrading of the NCTS referred to in the Annex to Implementing Decision (EU) 2016/578, the relevant information concerning incidents referred to in paragraph 1 shall be recorded in the electronic transit system by the nearest customs authority of the country in whose territory the means of transport is located.
▼M39 —————
CHAPTER V
Formalities at the customs office of destination
Article 45
Presentation of goods placed under the common transit procedure at the customs office of destination
Where goods placed under a common transit procedure arrive at the customs office of destination, the following shall be presented at that customs office:
the goods;
the transit accompanying document;
any information required by the customs office of destination.
The presentation shall take place during the official opening hours. However, the customs office of destination may, at the request of the person concerned, allow the presentation to take place outside the official opening hours or at any other place.
The customs office of destination shall in general carry out customs controls on the basis of the particulars of the common transit declaration received from the customs office of departure. ◄
Where the common transit procedure is ended, no irregularity has been detected by the customs office of destination, and the holder of the procedure presents the transit accompanying document, that customs office shall endorse that document at the request of the holder of the procedure for the purposes of providing alternative proof in accordance with Article 51(1). The endorsement shall consist of the stamp of that customs office, the official's signature, the date and the following text:
‘— Alternative proof — 99202’.
Article 46
Receipt
The receipt shall contain a reference to the MRN of the transit declaration.
Article 47
Notification of arrival of goods under the common transit procedure and control results
As of the dates of deployment of the upgrading of the NCTS referred to in the Annex to Implementing Decision (EU) 2016/578, the customs office of destination shall notify the customs office of departure of the arrival of the goods on the day the goods and the transit accompanying document with the MRN of the transit declaration are presented in accordance with Article 45(1).
As of the dates of deployment of the upgrading of the NCTS referred to in the Annex to Implementing Decision (EU) 2016/578, where the common transit operation is ended at a customs office other than that declared in the transit declaration, the customs office considered to be the customs office of destination in accordance with Article 45(5) shall notify the arrival to the customs office of departure on the day the goods and the transit accompanying document with the MRN of the transit declaration are presented in accordance with Article 45(1).
The customs office of departure shall notify the arrival to the customs office of destination declared in the transit declaration.
As of the dates of deployment of the upgrading of the NCTS referred to in the Annex to Implementing Decision (EU) 2016/578, where goods are carried by rail and one or more carriages or wagons are withdrawn from a set of coupled railway carriages or wagons due to technical problems, as referred to in Article 44(2)(b), the customs office of departure shall be notified at the latest on the 12th day following the day the first part of goods has been presented.
CHAPTER VI
Formalities related to the end of the procedure
Article 48
End and discharge of the procedure
Article 49
Enquiry procedure for goods moved under the common transit procedure
The customs office of destination shall send the control results immediately after receiving the request from the customs office of departure.
Where the customs authority of the country of departure has not yet received information that allows for the discharge of the common transit procedure or for the recovery of the debt, it shall request the relevant information from the holder of the procedure or, where sufficient particulars are available at destination, from the customs office of destination, in the following cases:
the customs office of departure has not received the notification of arrival of the goods by the expiry of the time-limit for the presentation of the goods set in accordance with Article 34;
the customs office of departure has not received the control results requested in accordance with paragraph 1;
the customs office of departure becomes aware that the notification of arrival of the goods or the control results were sent in error.
However, if, before the expiry of those time-limits, the customs authority of the country of departure receives information that the common transit procedure has not been ended correctly, or suspects that to be the case, it shall send the request without delay.
As of the dates of deployment of the upgrading of the NCTS referred to in the Annex to Implementing Decision (EU) 2016/578, where, following a request in accordance with paragraph 2, the customs office of destination has not provided sufficient information for the common transit procedure to be discharged, the customs authority of the country of departure shall request the holder of the procedure to provide that information, at the latest 35 days after initiating the enquiry procedure.
The holder of the procedure shall reply to that request within 28 days from the date on which it was sent.
That customs office shall reply to the request within 40 days from the date on which it was sent.
If a debt has been incurred, the customs authority of the country of departure shall take the following measures:
identify the debtor;
determine the customs authority responsible for the notification of the debt.
Article 50
Request to transfer recovery of the debt
Article 51
Alternative proof of ending the common transit procedure
The common transit procedure shall be considered as having been ended correctly where the holder of the procedure presents, to the satisfaction of the customs authority of the country of departure, one of the following documents identifying the goods:
a document certified by the customs authority of the country of destination which identifies the goods and establishes that the goods have been presented at the customs office of destination, or have been delivered to an authorised consignee as referred to in Article 87;
a document or a customs record, certified by the customs authority of a country which establishes that the goods have physically left the customs territory of the Contracting Party;
a customs document issued in a third country where the goods are placed under a customs procedure;
a document issued in a third country, stamped or otherwise certified by the customs authority of that country and establishing that goods are considered to be in free circulation in that country.
Article 52
Verification and administrative assistance
CHAPTER VII
Common transit procedure for moving goods by fixed transport installation
Article 53
Common transit procedure for moving goods by fixed transport installation
The holder of the procedure and the customs authority shall agree on the methods of customs supervision over the goods transported.
Without prejudice to the provisions of paragraph 8, the common transit procedure shall be deemed to have ended when the appropriate entry is made in the commercial records of the consignee or the operator of the fixed transport installation certifying that the goods transported by fixed transport installation:
have arrived at the consignee's plant;
are accepted into the distribution network of the consignee; or
have left the customs territory of the Contracting Parties.
Article 54
Optional application of the common transit procedure to the movement of goods by fixed transport installation
A common transit country may decide not to apply the common transit procedure to the movement of goods by fixed transport installation. Such decisions shall be communicated to the Commission which shall inform the other countries.
TITLE III
SIMPLIFICATIONS USED FOR THE COMMON TRANSIT PROCEDURE
CHAPTER I
General provisions concerning simplifications
Article 55
Types of transit simplifications
Upon application the customs authorities may authorise any of the following simplifications:
use of a comprehensive guarantee or guarantee waiver;
the use of seals of a special type, where sealing is required to ensure the identification of the goods placed under the common transit procedure;
the status of authorised consignor, allowing the holder of the authorisation to place goods under the common transit procedure without presenting them to customs;
the status of authorised consignee, allowing the holder of the authorisation to receive goods moved under the common transit procedure at an authorised place to end the procedure in accordance with Article 48(1);
the use of the paper-based common transit procedure for goods carried by air or the common transit procedure based on an electronic manifest for goods carried by air;
the use of the paper-based common transit procedure specific for the goods carried by rail;
the use of other simplified procedures based on Article 6 of the Convention;
the common transit procedure based on an electronic transport document as a transit declaration for air transport;
the use of a customs declaration with reduced data requirements to place goods under the common transit procedure.
The authorisations in accordance with paragraph 1(i) to use of a customs declaration with reduced data requirements to place goods under the common transit procedure shall be granted for:
transport of goods by rail;
transport of goods by air where an electronic transport document is not used as a transit declaration.
Until 1 May 2018, the common transit procedure based on an electronic manifest for goods carried by air as referred to in paragraph 1(e) shall apply to those economic operators who have not yet upgraded the systems necessary for the use of the electronic transport document as a transit declaration for air transport as referred to in paragraph 1(h). After that date, the common transit procedure based on an electronic manifest for goods carried by air referred to in paragraph 1(e) shall not apply.
Until the dates of deployment of the upgrading of the NCTS referred to in the Annex to Implementing Decision (EU) 2016/578, the simplification referred to in paragraph 1(i) shall not apply.
Article 56
Territorial scope of the authorisations of simplifications
Article 57
General conditions for authorisations of simplifications
The authorisation referred to in ►M39 Article 55(1)(a) ◄ shall be granted to applicants fulfilling the following conditions:
the applicant is established in the customs territory of a Contracting Party;
the applicant has not committed any serious infringement or repeated infringement of customs legislation and taxation rules, including no record of serious criminal offences relating to his economic activity;
the applicant regularly uses the common transit procedure or he has the practical standards of competence or professional qualifications directly related to the activity carried out.
The authorisations referred to in ►M39 Article 55(1)(b), (c), (d) and (i) ◄ shall be granted to applicants fulfilling the following conditions:
the applicant is established in the customs territory of a Contracting Party;
the applicant declares that he will regularly use the common transit arrangements;
the applicant has not committed any serious infringement or repeated infringement of customs legislation and taxation rules, including no record of serious criminal offences relating to his economic activity;
the applicant demonstrates a high level of control of his operations and of the flow of goods, by means of a system of managing commercial and, where appropriate, transport records, which allows appropriate customs controls;
the applicant has the practical standards of competence or professional qualifications directly related to the activity carried out.
The authorisations referred to in ►M39 Article 55(1)(e) ◄ shall be granted to applicants fulfilling the following conditions:
in case of the paper-based common transit procedure for goods carried by air, the applicant is an airline company and is established in the customs territory of a Contracting Party;
in case of the common transit procedure based on an electronic manifest for goods carried by air, the applicant is an airline company operating a significant number of flights between airports in the Contracting Parties and is established in the customs territory of a Contracting Party or has its registered office, central headquarter or a permanent business establishment there;
the applicant regularly uses the common transit arrangements, or the competent customs authority knows that he can meet the obligations under those arrangements;
the applicant has not committed any serious or repeated offences against customs or tax legislation.
The authorisations referred to in ►M39 Article 55(1)(f) ◄ shall be granted to applicants fulfilling the following conditions:
the applicant is a railway undertaking;
the applicant is established in the customs territory of a Contracting Party;
the applicant regularly uses the transit procedure, or the competent customs authority knows that he can meet the obligations under the procedure; and
the applicant has not committed any serious or repeated offences against customs or tax legislation.
The authorisations referred to in Article 55(1)(h) shall be granted to applicants fulfilling the following conditions:
the applicant is established in the customs territory of a Contracting Party;
the applicant declares that he will regularly use the common transit arrangements;
the applicant has not committed any serious infringement or repeated infringement of customs legislation and taxation rules, including no record of serious criminal offences relating to his economic activity;
the applicant demonstrates a high level of control of his operations and of the flow of goods, by means of a system of managing commercial and, where appropriate, transport records, which allows appropriate customs controls;
the applicant has the practical standards of competence or professional qualifications directly related to the activity carried out;
the applicant operates a significant number of flights between airports in the Contracting Parties;
the applicant demonstrates that he will be able to ensure that the particulars of the electronic transport document are available to the customs office of departure at the airport of departure and to the customs office of destination at the airport of destination and that those particulars are the same at the customs office of departure and the customs office of destination.
Article 58
Monitoring of the conditions for authorisations
The customs authorities shall monitor the conditions to be fulfilled by the holder of the authorisation. They shall also monitor compliance with the obligations resulting from that authorisation. Where the holder of the authorisation has been established for less than three years, the customs authority shall closely monitor that holder during the first year after the authorisation is granted.
Article 59
Contents of the application for authorisation
Article 60
Responsibility of the applicant
Persons applying for simplifications shall be responsible, under the provisions in force in the Contracting Parties, and without prejudice to the possible application of penal provisions, for the following:
the accuracy and completeness of the information given in the application;
the authenticity, accuracy and validity of any document supporting the application.
Article 61
Customs authorities competent to grant the authorisation
The applicant's main accounts shall relate to records and documentation enabling the customs authorities to grant the authorisation.
Article 62
Acceptance and rejection of applications and granting of authorisations
Article 63
Content of the authorisation
Article 64
Date of effect of the authorisation
Except where otherwise provided in the customs legislation, the authorisation shall be valid without limitation of time.
The authorisation shall take effect from the date which is different from the date on which the applicant receives it or is deemed to have received it in the following cases:
where the authorisation will favourably affect the applicant and the applicant has requested a different date of effect, in which case the authorisation shall take effect from the date requested by the applicant provided it is subsequent to the date from which it would have been applicable in accordance with paragraph 1;
where a previous authorisation has been issued with a limitation of time and the sole aim of the current decision is to extend its validity, in which case the authorisation shall take effect from the day after the expiry of the period of validity of the former authorisation;
where the effect of the authorisation is conditional upon the completion of certain formalities by the applicant, in which case the authorisation shall take effect from the day on which the applicant receives, or is deemed to have received, the notification from the competent customs authority stating that the formalities have been satisfactorily completed.
Article 65
Annulment, revocation and amendment of authorisations
The customs authorities shall annul an authorisation if all the following conditions are fulfilled:
the authorisation was granted on the basis of incorrect or incomplete information;
the holder of the authorisation knew or ought reasonably to have known that the information was incorrect or incomplete;
if the information had been correct and complete, the decision on the authorisation would have been different.
An authorisation shall be revoked or amended where in cases other than those referred to in paragraph 2:
one or more of the conditions laid down for the granting of the authorisation were not or are no longer fulfilled; or
upon application by the holder of the authorisation.
Article 66
Re-assessment of an authorisation
The customs authority competent to grant the authorisation shall re-assess it in the following cases:
where there are changes to the relevant legislation affecting the authorisation;
where necessary, as a result of the monitoring carried out;
where necessary, due to the information provided by the holder of the authorisation in accordance with Article 65(1) or by other authorities.
Article 67
Suspension of an authorisation
The customs authority competent to grant the authorisation shall suspend the authorisation instead of annulling, revoking or amending it, where:
that customs authority considers that there may be sufficient grounds for annulling, revoking or amending the authorisation, but does not yet have all necessary elements to decide about the annulment, revocation or amendment;
that customs authority considers that the conditions for the authorisation are not fulfilled or that the holder of the authorisation does not comply with the obligations imposed under that authorisation, and it is appropriate to allow the holder of the authorisation to take measures to ensure the fulfilment of the conditions or the compliance with the obligations;
the holder of the authorisation requests such suspension because he is temporarily unable to fulfil the conditions laid down for the authorisation or to comply with the obligations imposed under that authorisation.
Article 68
Period of suspension of an authorisation
However, where the customs authority considers that the holder of the authorisation may not fulfil the criteria set out in Article 57(1)(b), the authorisation shall be suspended until it is established whether a serious infringement or repeated infringements have been committed by any of the following persons:
the holder of the authorisation;
the person in charge of the company which is the holder of the authorisation concerned or exercising control over its management;
the person responsible for customs matters in the company which is the holder of the authorisation concerned.
The period of suspension may be further extended by the period of time needed by the competent customs authority to verify that those measures ensure fulfilment of the conditions or compliance with the obligations, the latter period of time shall not exceed 30 days.
Article 69
End of the suspension of an authorisation
A suspension shall end at the expiry of the period of suspension unless before the expiry of that period one of the following situations occurs:
the suspension is withdrawn on the basis that, in the cases referred to in Article 67(1)(a), there are no grounds for the annulment, revocation or amendment of the authorisation in accordance with Article 65, in which case the suspension shall end on the date of withdrawal;
the suspension is withdrawn on the basis that, in cases referred to in Article 67(1)(b) and (c), the holder of the authorisation has taken, to the satisfaction of the customs authority competent to grant by the authorisation, the necessary measures to ensure fulfilment of the conditions laid down for the authorisation or compliance with the obligations imposed under that authorisation, in which case the suspension shall end on the date of withdrawal;
the suspended authorisation is annulled, revoked or amended, in which case the suspension shall end on the date of annulment, revocation or amendment.
▼M39 —————
Article 71
Reassessment of authorisations already in force 1 May 2016
Authorisations granted on the basis of ►M39 Article 44(1)(a), (b), (d) and (e) of Appendix I to the Convention as amended ◄ by Decision No 1/2008 which are valid on 1 May 2016 shall remain valid as follows:
for authorisations having a limited period of validity, until the end of that period or 1 May 2019, whichever is the earlier;
for all other authorisations, until the authorisation is reassessed.
▼M39 —————
Article 72
Keeping of records by the customs authorities
Article 73
Validity of seals already in use on 1 May 2016
Customs seals, referred to in Article 38 and seals of a special type referred to in Article 82 compliant with ►M39 Annex II to Appendix I ◄ to the Convention as amended by Decision No 1/2008 may continue to be used until stocks run out or until 1 May 2019, whichever is the earlier.
CHAPTER II
Comprehensive guarantee and guarantee waiver
Article 74
Reference amount
For the purpose of that calculation, account shall be taken of the highest rates of debt applicable to goods of the same type in the country of the customs office of guarantee, and Union goods carried in accordance with the Convention shall be treated as non-Union goods.
Where the information necessary to determine the reference amount is not available to the customs office of guarantee, that amount shall be fixed at EUR 10 000 for each transit operation.
That person shall inform the customs office of guarantee when the reference amount is no longer at a level sufficient to cover his operations.
The monitoring of the reference amount that covers the amount of the debt which may become payable with respect to goods placed under the common transit procedure shall be ensured, by means of the electronic system referred to in Article 4(1) for each common transit operation at the time of placing of goods under the common transit procedure.
Article 75
The level of the comprehensive guarantee
The amount of the comprehensive guarantee shall be reduced to:
50 % of the reference amount determined in accordance with Article 74 where the following conditions are fulfilled:
the applicant maintains an accounting system which is consistent with the generally accepted accounting principles applied in the Contracting Party where the accounts are held, allows audit-based customs control and maintains a historical record of data that provides an audit trail from the moment the data enters the file;
the applicant has an administrative organisation which corresponds to the type and size of business and which is suitable for the management of the flow of goods, and has internal controls capable of preventing, detecting and correcting errors and of preventing and detecting illegal or irregular transactions;
the applicant is not subject to bankruptcy proceedings;
during the last three years preceding the submission of the application, the applicant has fulfilled his financial obligations regarding payments of debt collected on or in connection with the import or export of goods;
the applicant demonstrates on the basis of the records and information available for the last three years preceding the submission of the application that he has sufficient financial standing to meet his obligations and fulfil his commitments having regard to the type and volume of the business activity, including having no negative net assets, unless where they can be covered;
the applicant can demonstrate having sufficient financial resources to meet his obligations for the reference amount not covered by the guarantee;
30 % of the reference amount determined in accordance with Article 74 where the following conditions are fulfilled:
the applicant maintains an accounting system which is consistent with the generally accepted accounting principles applied in the Contracting Party where the accounts are held, allows audit-based customs control and maintains a historical record of data that provides an audit trail from the moment the data enters the file;
the applicant has an administrative organisation which corresponds to the type and size of business and which is suitable for the management of the flow of goods, and has internal controls capable of preventing, detecting and correcting errors and of preventing and detecting illegal or irregular transactions;
the applicant ensures that relevant employees are instructed to inform the customs authorities whenever compliance difficulties are discovered and establishes procedures for informing the customs authorities of such difficulties;
the applicant is not subject to bankruptcy proceedings;
during the last three years preceding the submission of the application, the applicant has fulfilled his financial obligations regarding payments of debt collected on or in connection with the import or export of goods;
the applicant demonstrates on the basis of the records and information available for the last three years preceding the submission of the application that he has sufficient financial standing to meet his obligations and fulfil his commitments having regard to the type and volume of the business activity, including having no negative net assets, unless where they can be covered;
the applicant can demonstrate having sufficient financial resources to meet his obligations, for the part of the reference amount not covered by the guarantee;
0 % of the reference amount determined in accordance with Article 74 where the following conditions are fulfilled:
the applicant maintains an accounting system which is consistent with the generally accepted accounting principles applied in the Contracting Party where the accounts are held, allows audit-based customs control and maintains a historical record of data that provides an audit trail from the moment the data enters the file;
the applicant allows the customs authority physical access to its accounting systems and, where applicable, to its commercial and transport records;
the applicant has a logistical system which identifies goods as goods in free circulation in the Contracting Party or as third-country goods and indicates, where appropriate, their location;
the applicant has an administrative organisation which corresponds to the type and size of business and which is suitable for the management of the flow of goods, and has internal controls capable of preventing, detecting and correcting errors and of preventing and detecting illegal or irregular transactions;
where applicable, the applicant has satisfactory procedures in place for the handling of licences and authorisations granted in accordance with commercial policy measures or relating to trade in agricultural products;
the applicant has satisfactory procedures in place for the archiving of his records and information and for protection against the loss of information;
the applicant ensures that relevant employees are instructed to inform the customs authorities whenever compliance difficulties are discovered and establishes procedures for informing the customs authorities of such difficulties;
the applicant has appropriate security measures in place to protect the applicant's computer system from unauthorised intrusion and to secure the applicant's documentation;
the applicant is not subject to bankruptcy proceedings;
during the last three years preceding the submission of the application, the applicant has fulfilled his financial obligations regarding payments of debt collected on or in connection with the import or export of goods;
the applicant demonstrates on the basis of the records and information available for the last three years preceding the submission of the application that he has sufficient financial standing to meet his obligations and fulfil his commitments having regard to the type and volume of the business activity, including having no negative net assets, unless where they can be covered;
the applicant can demonstrate having sufficient financial resources to meet his obligations, for the part of the reference amount not covered by the guarantee.
Article 76
Methods of use of comprehensive guarantee and guarantee waiver
The customs office of guarantee shall communicate to the holder of the procedure the following information:
a guarantee reference number;
an access code associated with the guarantee reference number.
Upon request of the person who has provided the guarantee, the customs office of guarantee shall assign one or more additional access codes to this guarantee to be used by that person or his representatives.
Article 77
Temporary prohibition of the use of the comprehensive guarantee or of the comprehensive guarantee for a reduced amount, including a guarantee waiver
The use of the comprehensive guarantee and of the comprehensive guarantee for a reduced amount, including a guarantee waiver, may be prohibited temporarily in the following cases:
in special circumstances;
for the goods in respect of which large-scale fraud involving the use of the guarantee has been proven.
The special circumstances, large-scale fraud and the procedural rules for temporary prohibition of the comprehensive guarantee and of the comprehensive guarantee for a reduced amount, including a guarantee waiver, are laid down in Annex I.
Article 78
Guarantee document
Article 79
Comprehensive guarantee certificates and guarantee waiver certificates
Article 80
Revocation and cancellation relating to the authorisation to use the comprehensive guarantee or relating to the guarantor's undertaking
Each country shall forward to the Commission the means by which certificates that remain valid but have not yet been returned or that have been declared as stolen, lost or falsified may be identified. The Commission shall inform the other countries.
CHAPTER III
Use of seals of a special type
Article 81
Authorisation for the use of seals of a special type
Article 82
Formalities for the use of seals of a special type
Where seals have been certified by a competent body in accordance with ISO International Standard No 17712:2013 ‘Freight containers — Mechanical Seals’, those seals shall be deemed to fulfil those requirements.
For containerised transports, seals with high-security features shall be used to the greatest extent possible.
The seal of a special type shall bear either of the following indications:
the name of the person authorised in accordance with ►M39 Article 55(1)(b) ◄ to use it;
a corresponding abbreviation or code on the basis of which the customs authority of the country of departure can identify the person concerned.
Article 83
Customs supervision for the use of seals of a special type
The customs authority shall do the following:
notify the Commission and the customs authorities of the other Contracting Parties of seals of a special type in use and of seals of a special type which it has decided not to approve for reasons of irregularities or technical deficiencies;
review the seals of a special type approved by it and in use, when it receives information that another authority has decided not to approve a particular seal of a special type;
conduct a mutual consultation in order to reach a common assessment;
monitor the use of the seals of a special type by persons authorised in accordance with Article 81.
Where necessary, the Contracting Parties in agreement with each other may establish a common numbering system, define use of common security features and technology.
CHAPTER IV
Authorised consignor status
Article 84
Authorisations for the status of authorised consignor for placing goods under the common transit procedure
The status of authorised consignor referred to in ►M39 Article 55(1)(c) ◄ shall only be granted to applicants who are authorised to provide a comprehensive guarantee or to use a guarantee waiver referred to in ►M39 Article 55(1)(a) ◄ .
Article 85
Contents of the authorisation for the status of authorised consignor
The authorisation shall specify in particular:
the customs office or customs offices of departure that will be responsible for forthcoming common transit operations;
the time-limit available to the customs authorities after the authorised consignor has lodged the transit declaration in order to carry out controls of the goods, if necessary, before the release of the goods;
the identification measures to be taken, in which case the customs authorities may prescribe that the means of transport or the package or packages shall bear seals of a special type approved by the customs authorities as complying with the characteristics set out in Article 82 and assigned to be affixed by the authorised consignor;
the prohibited categories or movements of goods;
the operating and control measures which the authorised consignor has to comply with. If applicable, any specific conditions related to transit arrangements carried out beyond normal working hours of the customs office(s) of departure.
Article 86
Placing of goods under the common transit procedure by an authorised consignor
The authorised consignor shall enter the following information into the electronic transit system:
the itinerary where an itinerary has been prescribed in accordance with Article 33(2);
the time-limit set in accordance with Article 34 within which the goods shall be presented at the customs office of destination;
the number and the individual seal identifiers of the seals, where appropriate.
As of the dates of deployment of the upgrading of the NCTS referred to in the Annex to Implementing Decision (EU) 2016/578, the authorised consignor shall print a transit accompanying document, provided that he has received the notification of the release of the goods for the common transit procedure from the customs office of departure.
CHAPTER V
Authorised consignee status
Article 87
Authorisations for the status of authorised consignee for receiving goods moved under the common transit procedure
The status of authorised consignee referred to in ►M39 Article 55(1)(d) ◄ shall be granted only to applicants who declare that they will regularly receive goods that have been placed under a common transit procedure.
Article 88
Formalities for goods moved under the common transit procedure received by an authorised consignee
When the goods arrive at a place specified in the authorisation, referred to in ►M39 Article 55(1)(d) ◄ , the authorised consignee shall:
immediately notify the customs office of destination of the arrival of the goods and inform it of any irregularities or incidents that occurred during transport;
unload the goods only after obtaining the permission from the customs office of destination;
after unloading enter the results of the inspection and any other relevant information relating to the unloading into his records without delay;
notify the customs office of destination of the results of the inspection of the goods and inform it of any irregularities on the third day following the day on which he has received the permission to unload the goods, at the latest.
Article 89
Contents of the authorisation
The authorisation shall specify in particular:
the customs office or offices of destination responsible for the goods received by the authorised consignee;
the time-limit when the authorised consignee is to receive the permission to unload the goods from the customs office of destination;
excluded categories or movements of goods;
the operating and control measures which the authorised consignee has to comply with. If applicable, any specific conditions related to transit arrangements carried out beyond normal working hours of the customs office(s) of destination.
Article 90
End of the common transit procedure for goods received by an authorised consignee
CHAPTER VI
Paper-based common transit procedure for goods carried by rail
Article 91
CIM consignment note as a transit declaration for the paper-based common transit procedure for goods carried by rail
The CIM consignment note shall be regarded as a transit declaration for the paper-based common transit procedure for goods carried by rail provided it is used for transport operations that are carried out by authorised railway undertakings in cooperation with each other.
Article 92
Accounting offices of authorised railway undertakings and customs control
Article 93
Holder of the paper-based common transit procedure for goods carried by rail and his obligations
The holder of the paper-based common transit procedure for goods carried by rail shall be one of the following:
an authorised railway undertaking established in a country and which accepts goods for carriage under cover of a CIM consignment note as a transit declaration for the use of the paper-based common transit procedure for goods carried by rail and which fills in the box 58b of the CIM consignment note by ticking the box ‘yes’ and by entering its UIC code;
when the transport operation starts outside the customs territory of the Contracting Parties and the goods enter that customs territory, any other authorised railway undertaking which is established in a country and on whose behalf the box 58b is filled in by a railway undertaking of a third country.
Article 94
Obligations of the authorised railway undertakings
The authorised railway undertakings in cooperation with each other shall operate a commonly agreed system to check and investigate irregularities, their movement of goods and be responsible for the following:
for separate settlement of transport costs on the basis of information to be held available for each paper-based common transit operation for goods carried by rail and for each month for the independent authorised railway undertakings concerned in each country;
for the breakdown of transport costs for each country whose territory the goods enter during the use of the paper-based common transit operation for goods carried by rail;
for payment of the respective share of the costs incurred by each of the cooperating authorised railway undertakings.
Article 95
Label
The authorised railway undertakings shall ensure that goods transported under the paper-based common transit procedure for goods carried by rail are identified by labels bearing a pictogram, a specimen of which is shown in Annex B11 to Appendix III.
The labels shall be affixed or directly printed to the CIM consignment note and to the relevant railway wagon in the case of a full load or, in other cases, to the package or packages.
A stamp which reproduces the pictogram shown in Annex B11 to Appendix III may be used instead of the label referred to in the first paragraph.
Article 96
Modification of the contracts of carriage
Where a contract of carriage is modified so that:
a transport operation which was to end outside the customs territory of a Contracting Party ends within it, or
a transport operation which was to end within the customs territory of a Contracting Party ends outside it,
the authorised railway undertakings shall not perform the modified contract without the prior agreement of the customs office of departure.
In all other cases, the authorised railway undertakings may perform the modified contract. They shall inform the customs office of departure of the modification made without delay.
Article 97
Use of the CIM consignment note
The customs office of departure shall clearly enter in the box reserved for customs on sheets 1, 2 and 3 of the CIM consignment note:
the code ‘T1’, where the goods move under the T1 procedure;
the code ‘T2’ or ‘T2F’, as appropriate, where the goods move under the T2 procedure and, under the Union provisions, entry of this code is mandatory.
The code ‘T2’ or ‘T2F’ shall be authenticated by the stamp of the customs office of departure.
Where goods move from one point to another in the Union through the territory of one or more common transit countries, the labels referred to in Article 95 need not be affixed.
Article 98
Identification measures
Unless the customs office of departure decides otherwise, as a general rule and having regard to the identification measures applied by the authorised railway undertakings, that customs office shall not seal the means of transport or the individual packages containing the goods.
Article 99
Formalities at the customs office of transit
Where the paper-based common transit procedure for goods carried by rail applies, no formalities need to be carried out at the customs office of transit.
Article 100
Formalities at the customs office of destination
Where the goods placed under the paper-based common transit procedure for goods carried by rail arrive at the customs office of destination, the following shall be presented by the authorised railway undertaking at that customs office:
the goods;
sheets 2 and 3 of the CIM consignment note.
The customs office of destination shall return sheet 2 of the CIM consignment note to the authorised railway undertaking after stamping it and shall retain sheet 3 of the CIM consignment note.
However, if the goods are released for free circulation or placed under another customs procedure at an intermediate station, the customs office competent for this station shall act as the customs office of destination.
Article 101
Movement of goods to third countries
Article 102
Movement of goods from third countries
No formalities need be carried out at that customs office.
The formalities laid down in Article 100 shall be carried out at that customs office.
Article 103
Movement of goods through the territory of the Contracting Parties
Article 104
Customs status of goods
Goods carried under Article 102(1) or 103(1) shall be considered as moving under the T1 procedure unless the customs status of Union goods is established in accordance with the provisions of Appendix II.
Article 105
Loading lists
The loading list shall include the wagon number to which the CIM consignment note refers or, where appropriate, the container number of the container containing the goods.
The serial numbers of the loading lists relating to each of the two types of goods shall be entered in the box reserved for the description of goods on the CIM consignment note.
Article 106
Scope of the standard procedures and the paper-based procedures for combined road-rail transport
That reference shall specify the type of the transit declaration, the customs office of departure, the date and registration number of each transit declaration used.
In addition, sheet 2 of the CIM consignment note shall be authenticated by the railway undertaking competent for the last railway station involved in the common transit operation. That railway undertaking shall authenticate the CIM consignment note after ascertaining that the transport of the goods is covered by the transit declaration or declarations referred to.
Article 107
Authorised consignor and authorised consignee
CHAPTER VII
Paper based common transit procedure for goods carried by air, common transit procedure based on an electronic manifest for goods carried by air and common transit procedure based on an electronic transport document as a transit declaration for air transport
Article 108
A manifest as a transit declaration for the use of the paper-based common transit procedure for goods carried by air
Article 109
Formalities to be carried out by the airline company
The airline company shall enter the following information into a manifest:
the code ‘T1’ where the goods move under the T1 procedure;
the code ‘T2’ or ‘T2F’, as appropriate, where the goods move under the T2 procedure and, under the Union provisions, entry of this code is mandatory;
the name of the airline company transporting the goods;
the flight number;
the date of the flight;
the airport of departure and the airport of destination.
In addition to information requested in paragraph 1, the airline company shall for each consignment enter into that manifest the following information:
the number of the air waybill;
the number of packages;
the trade description of the goods including all the details necessary for their identification;
the gross mass.
Article 110
Verification of a list of manifests used as a paper-based transit declaration for goods carried by air
That list shall include the following information for each manifest:
the number of the manifest;
the code identifying the manifest as a transit declaration in accordance with Article 109(1)(a) and (b);
the name of the airline company which transported the goods;
the flight number; and
the date of the flight.
Article 111
An electronic manifest as a transit declaration for the use of the common transit procedure for goods carried by air
Provided that no objection is received within 60 days, the competent customs authorities shall issue the authorisation.
The airline company shall enter one of the following codes next to the relevant items in the manifest:
‘T1’ where the goods move under the T1 procedure;
the code ‘T2’ or ‘T2F’, as appropriate, where the goods move under the T2 procedure and, where under the Union provisions entry of this code is mandatory;
‘TD’ for goods already moving under a transit procedure; in such cases, the airline company shall also enter the code ‘TD’ in the corresponding airway bill as well as a reference for the procedure used, the number and date of the transit declaration or transfer document and the name of the issuing office;
‘C’ (equivalent to ‘T2L’) or ‘F’ (equivalent to ‘T2LF’), as appropriate, for Union goods not placed under a transit procedure;
‘X’ for Union goods for which the export was ended and exit confirmed and which are not placed under a transit procedure.
Where necessary, the competent customs authorities at the airport of destination shall transmit to the competent customs authorities at the airport of departure, for verification, the relevant details of manifests received by an electronic system allowing for the exchange of information.
Article 111a
Consultation prior to authorisations to use an electronic transport document as a transit declaration for air transport
Where, following the examination referred to in the first subparagraph, the consulted customs authority establishes that the applicant does not fulfil one or more of the conditions and criteria for granting that authorisation, the results, duly documented and justified, shall be transmitted to the customs authority competent to grant the authorisation.
The time limit established for the consultation in accordance with paragraph 2 may be extended by the customs authority competent to grant the authorisation in any of the following cases:
where, due to the nature of the examinations to be performed, the consulted authority requests more time;
where the applicant carries out adjustments in order to ensure the fulfilment of the conditions and criteria referred to in paragraph 1 and communicates them to the customs authority competent to grant the authorisation, which shall inform the consulted customs authority accordingly.
Article 111b
Formalities for the use of an electronic transport document as a transit declaration for air transport
Where the goods are to be placed under the common transit procedure, the holder of the procedure shall enter the appropriate codes next to the relevant items in the electronic transport document:
|
(a) |
‘T1’ — goods not having the customs status of Union goods, which are placed under the common transit procedure; |
|
(b) |
‘T2’ — goods having the customs status of Union goods, which are placed under the common transit procedure; |
|
(c) |
‘T2F’ — Goods having the customs status of Union goods, which are moved between a part of the customs territory of the Union where the provisions of Council Directive 2006/112/EC ( 4 ) or Council Directive 2008/118/EC ( 5 ) do not apply and a common transit country; |
|
(d) |
‘C’ — Union goods not placed under a transit procedure; |
|
(e) |
‘TD’ — Goods already placed under a transit procedure; |
|
(f) |
‘X’ — Union goods for which the export was ended and exit confirmed and which are not placed under a transit procedure. |
TITLE IV
DEBT AND RECOVERY
CHAPTER I
Debt and debtor
Article 112
Incurrence of the debt
A debt within the meaning of Article 3(l) shall be incurred through:
the removal of the goods from the common transit procedure;
non-compliance with a condition governing the placing of the goods under the common transit procedure or the use of the common transit procedure.
The debt shall be extinguished in any of the following ways:
where the debt was incurred pursuant to paragraph 1(a) or (b) and where the following conditions are fulfilled:
the failure which led to the incurrence of a debt had no significant effect on the correct operation and it did not constitute an attempt at deception;
all the formalities necessary to regularise the situation of the goods are subsequently carried out;
where the removal of the goods from the common transit procedure or the non-compliance with a condition governing the placing of the goods under the common transit procedure or the use of the common transit procedure results from the total destruction or irretrievable loss of those goods as a result of the actual nature of the goods or unforeseeable circumstances or force majeure, or as a consequence of instruction by the customs authorities.
Goods shall be considered as irretrievably lost when they have been rendered unusable by any person.
The debt shall be incurred at the moment:
the goods were removed from the common transit procedure or the moment the conditions for the use of the common transit procedure were not met or ceased to be met;
a customs declaration was accepted for the placing of goods under a common transit procedure where it is established subsequently that a condition governing the placing of the goods under that procedure was not in fact fulfilled.
Article 113
Identification of the debtor
The debtor shall be any of the following:
the person who was required to comply with the conditions governing the placing of the goods under the common transit procedure or the use of the common transit procedure;
any person who was aware or should reasonably have been aware that a condition under the Convention was not complied with and who acted on behalf of the person who was obliged to comply with that condition, or who participated in the act which led to the non-compliance with that condition;
any person who acquired or held the goods in question and who was aware or should reasonably have been aware at the time of acquiring or receiving the goods that a condition under the Convention or under the customs legislation was not complied with;
the holder of the procedure.
Article 114
Place where the debt is incurred
A debt shall be incurred:
at the place where the events from which it arises occur;
if it is not possible to determine that place, the debt shall be incurred at the place where the customs authorities conclude that the goods are in a situation in which the debt is incurred.
If the goods have been placed under a common transit procedure which has not been discharged and the place where the debt is incurred cannot be determined pursuant to paragraph 1(a) and (b) of this Article within the following time-limits:
within seven months from the latest date on which the goods should have been presented at the customs office of destination, unless before the expiry of that time-limit a request to transfer recovery of the debt, as referred to in Article 50, was sent to the authority responsible for the place where, according to the evidence obtained by the customs authority of the country of departure, the events from which the debt arises occurred, in which case that time-limit is extended with a maximum of one month;
one month from the expiry of the time-limit referred to in Article 49(4) for the reply by the holder of the procedure to a request for the information needed to discharge the procedure, where the customs authority of the country of departure has not been notified of the arrival of the goods, and the holder of the procedure has provided insufficient or no information;
the debt shall be incurred either in the country responsible for the last customs office of transit notifying the border passage to the customs office of departure or, failing this, in the country responsible for the customs office of departure.
Article 115
Request to transfer recovery of the debt
CHAPTER II
Action against the debtor or the guarantor
Article 116
Action against the debtor
The competent customs authorities shall initiate debt recovery proceedings as soon as they are in a position to:
calculate the amount of the debt; and
determine the debtor.
Article 117
Action against the guarantor
Article 118
Exchange of information and cooperation with a view to recovery
Without prejudice to Article 13a of the Convention, and in accordance with Article 114 of this Appendix, the countries shall assist each other in determining the authorities competent for recovery.
Those authorities shall inform the customs office of departure and the customs office of guarantee of all cases in which a debt was incurred in relation to transit declarations accepted by the customs office of departure, and of the action taken for recovery against the debtor. Furthermore, they shall inform the customs office of departure of the collection of duties and other charges, in order to enable the customs office to discharge the transit operation.
ANNEX I
APPLICATION OF ARTICLE 77
Temporary prohibition of the use of the comprehensive guarantee for a reduced amount or the comprehensive guarantee
|
1. |
Situations where use of the comprehensive guarantee for a reduced amount or the comprehensive guarantee may be prohibited temporarily:
1.1.
Temporary prohibition of the use of a comprehensive guarantee for a reduced amount The ‘special circumstances’ referred to in Article 77(a) mean a situation in which it has been established, in a significant number of cases involving more than one holder of the procedure and putting at risk the smooth functioning of the procedure that, in spite of the application of Article 65 or Article 80, the comprehensive guarantee or a comprehensive guarantee for a reduced amount referred to in Article 75(a) and (b) is no longer sufficient to ensure payment, within the prescribed time-limit, of the debt arising when some types of goods are removed from the common transit procedure.
1.2.
Temporary prohibition of the use of a comprehensive guarantee The ‘large-scale fraud’ referred to in Article 77(b) means a situation where it is established that, in spite of the application of Article 65 or 80, the comprehensive guarantee or the comprehensive guarantee for a reduced amount referred to in Article 75(a) and (b) is no longer sufficient to ensure payment, within the time-limit prescribed, of the debt arising when some types of goods are removed from the common transit procedure. In this connection account should be taken of the volume of goods removed and the circumstances of their removal, particularly if these result from internationally organised criminal activities. |
|
2. |
Decision-making procedure for temporarily prohibiting use of the comprehensive guarantee for a reduced amount or the comprehensive guarantee
|
|
3. |
Measures to alleviate the financial consequences of prohibiting use of the comprehensive guarantee When the use of the comprehensive guarantee has been prohibited temporarily according to Article 77, holders of comprehensive guarantees may, upon request, use an individual guarantee. However, the following special conditions shall apply:
—
the individual guarantee shall be put up in the form of a specific guarantee document which covers only the types of goods referred to in the decision;
—
this individual guarantee may be used only at the customs office of departure identified in the guarantee document;
—
it may be used to cover several simultaneous or successive operations provided that the sum of the amounts involved in current operations for which the procedure has not yet been discharged does not exceed the reference amount of the individual guarantee. In that case, the customs office of guarantee assigns one initial access code for the guarantee to the holder of the procedure. The holder of the procedure can assign one or more access codes to this guarantee to be used by himself or his representatives;
—
each time the procedure is discharged for a common transit operation covered by this individual guarantee, the amount corresponding to that operation shall be released and may be re-used to cover another operation up to the maximum amount of the guarantee.
|
|
4. |
Derogation from the decision temporarily prohibiting use of the comprehensive guarantee or the comprehensive guarantee for a reduced amount
|
ANNEX II
BUSINESS CONTINUITY PROCEDURE FOR COMMON TRANSIT
▼M39 —————
CHAPTER I
General provisions
|
1. |
This Annex lays down specific provisions for use of the business continuity procedure, under Article 26(1) of Appendix I, for the holders of the procedure, including authorised consignors, in the event of a temporary failure of:
—
the electronic transit system;
—
the computerised system used by the holders of the procedure for lodging the common transit declaration by means of electronic data-processing techniques, or
—
the electronic connection between the computerised system used by the holders of the procedure for lodging the common transit declaration by means of electronic data-processing techniques and the electronic transit system.
|
|
2. |
Transit declarations 2.1. The transit declaration used in a business continuity procedure shall be recognisable by all parties involved in the transit operation in order to avoid problems at the customs office of transit, at the customs office of destination and upon arrival at the authorised consignee. For this reason the used documents are limited to the following:
—
a Single Administrative Document (SAD), or
—
a SAD printed out on plain paper by the computerised system of the economic operator, as foreseen in Annex B6 to Appendix III, or
—
as of the dates of deployment of the upgrading of the NCTS referred to in the Annex to Implementing Decision (EU) 2016/578, a SAD printed out on plain paper by the computerised system of the economic operator, as foreseen in Annex B6a to Appendix III, or
—
a Transit Accompanying Document (TAD), supplemented, if necessary by List of items (LoI)
►M39
, ◄
—
as of the dates of deployment of the upgrading of the NCTS referred to in the Annex to Implementing Decision (EU) 2016/578, a Transit Accompanying Document (TAD) supplemented by List of items (LoI).
2.2. The transit declaration may be supplemented by one or more continuation sheets using the form set out in Appendix 3 to Annex I to the Convention on the simplification of formalities in trade in goods done at Interlaken on 20 May 1987 (SAD Convention). The forms shall be an integral part of the declaration. Loading lists complying with Annex B5 to Appendix III and provided using the form set out in Annex B4 to Appendix III may be used instead of continuation sheets as the descriptive part of a written transit declaration, of which they shall be an integral part. As of the dates of deployment of the upgrading of the NCTS referred to in the Annex to Implementing Decision (EU) 2016/578, loading lists complying with Annex B5a to Appendix III and provided using the form set out in Annex B4a to Appendix III may be used instead of continuation sheets as the descriptive part of a written transit declaration, of which they shall be an integral part. 2.3. For the implementation of point 2.1 of this Annex, the transit declaration shall be completed in accordance with Annex B6 to Appendix III. As of the dates of deployment of the upgrading of the NCTS referred to in the Annex to Implementing Decision (EU) 2016/578, for the implementation of point 2.1 of this Annex, the transit declaration shall be completed in accordance with Annex B6a to Appendix III. |
CHAPTER II
Implementing rules
3. Unavailability of the electronic transit system
3.1. The rules shall be applied as follows:
3.2. Where the decision to apply the business continuity procedure is taken, any transit data with LRN or MRN allocated to the transit operation shall be withdrawn from the electronic transit system on the basis of information provided by a person who lodged that transit data into the electronic transit system.
3.3. The customs authority shall monitor the use of the business continuity procedure in order to avoid its misuse.
4. Unavailability of the computerised system used by the holders of the procedure for lodging the common transit declaration data by means of electronic data-processing techniques or of the electronic connection between that computerised system and the electronic transit system
The provisions set out in point 3 of this Annex shall be applied.
The holder of the procedure shall inform the customs authority when his computerised system or the electronic connection between that computerised system and the electronic transit system are available again.
5. Unavailability of the authorised consignor's computerised system or the electronic connection between that computerised system and the electronic transit system
Where the authorised consignor's computerised system or the electronic connection between that computerised system and the electronic transit system are unavailable the following procedure shall apply:
6. Data-capture by the customs authority
However, in the cases referred to in points 4 and 5 of this Annex, the customs authority may allow the holder of the procedure to submit the transit declaration in one copy (making use of the SAD or the TAD) to the customs office of departure in order to have it processed by the electronic transit system.
CHAPTER III
Operation of the procedure
7. Furnishing of an individual guarantee by a guarantor
Where the customs office of guarantee is not the customs office of departure for the transit operation, it shall keep a copy of the guarantor's undertaking. The holder of the procedure shall present the original to the customs office of departure, where it shall be retained. If necessary the customs office of departure may request a translation into the official language, or one of the official languages, of the country concerned.
8. Signing of the transit declaration and undertaking of the holder of the procedure
By signing the transit declaration the holder of the procedure assumes responsibility for:
9. Identification measures
Where Article 36(7) of Appendix I applies, the customs office of departure shall enter the following phrase against the ‘seals affixed’ heading in box D (‘Control by office of departure’) of the transit declaration:
‘— Waiver — 99201’.
10. Entries in the transit declaration and release of the goods
|
11. |
Goods placed under the common transit procedure shall be carried under cover of copies 4 and 5 of the SAD or under cover of one copy of the TAD given to the holder of the procedure by the customs office of departure. Copy 1 of the SAD and the copy of TAD shall remain at the customs office of departure. |
|
12. |
Customs office of transit 12.1. The carrier shall present a transit advice note made out on a form set out in Annex B8 to Appendix III to each customs office of transit, which shall retain it. Instead of the transit advice note a photocopy of copy 4 of the SAD or a photocopy of the copy of the TAD may be presented and retained by the customs office of transit. 12.2. Where goods are carried via the customs office of transit other than that declared, the actual customs office of transit shall inform the customs office of departure. |
|
13. |
Presentation at the customs office of destination 13.1. The customs office of destination shall register the copies of the transit declaration, record on them the date of arrival and enter the details of controls carried out. 13.2. A transit operation may end at an office other than the customs office declared in the transit declaration. That office shall then become the actual customs office of destination. Where the actual customs office of destination comes under the jurisdiction of a Contracting Party other than the one having jurisdiction over the customs office declared, the actual customs office shall enter in box I (‘Control by customs office of destination’) of the transit declaration the following endorsement in addition to the usual observations it is required to make: ‘— Differences: customs office where goods were presented …… (customs office reference number) — 99203’. 13.3. Where the second paragraph of point 13.2 of this Annex applies and where the transit declaration bears the following statement, the actual customs office of destination shall keep the goods under its control and not allow their removal other than to the Contracting Party having jurisdiction over the customs office of departure, unless specifically authorised by the latter: ‘— Exit from the Union subject to restrictions or charges under Regulation/Directive/Decision No … — 99204’. |
|
14. |
Receipt The receipt may be made out on the back of copy 5 of the SAD, in the space provided or in the form set out in Annex B10 to Appendix III. |
|
15. |
Return of copy 5 of the SAD or the copy of the TAD The competent customs authority of the Contracting Party of destination shall return copy 5 of the SAD to the customs authority in the Contracting Party of departure without delay and at most within 8 days of the date when the operation ended. Where the TAD is used it is the copy of the TAD presented which is returned under the same conditions as copy 5. |
|
16. |
Informing the holder of the procedure and alternative proof of the end of the procedure Where the copies referred to in point 15 of this Annex are not returned to the customs authority of the Contracting Party of departure within 30 days of the time-limit for presentation of the goods at the customs office of destination, that authority shall inform the holder of the procedure and ask him to furnish proof that the procedure has ended correctly. |
|
17. |
Enquiry procedure 17.1. Where the customs office of departure has not received proof within 60 days of time-limit for presentation of the goods at the customs office of destination that the procedure was ended correctly, the customs authority of the Contracting Party of departure shall immediately request the information needed to discharge the procedure. Where, during the steps of an enquiry procedure, it is established that the common transit procedure cannot be discharged, the customs authority of the Contracting Party of departure shall establish whether a debt has been incurred. If a debt has been incurred, the customs authority of the Contracting Party of departure shall take the following measures:
—
identify the debtor,
—
determine the customs authorities responsible for notification of the debt.
17.2. If, before the expiry of those time-limits, the customs authority of the Contracting Party of departure receives information that the common transit procedure has not been ended correctly, or suspects that to be the case, it shall send the request without delay. 17.3. The enquiry procedure shall likewise be initiated when it is discovered subsequently that proof of the end of the common transit procedure has been forged and that the enquiry procedure is necessary to meet the objectives of point 17.1 of this Annex. |
|
18. |
Guarantee — Reference amount 18.1. For the application of Article 74 of Appendix I the holder of the procedure shall ensure that the amount at stake does not exceed the reference amount, taking into account also any operations for which the procedure is not yet ended. 18.2. The holder of the procedure shall inform the customs office of guarantee when the reference amount falls below a level sufficient to cover his transit operations. |
|
19. |
Comprehensive guarantees certificates, guarantee waiver certificates and individual guarantee vouchers 19.1. The following shall be presented to the customs office of departure:
—
comprehensive guarantee certificate, in the form set out in Annex C5 to Appendix III;
—
guarantee waiver certificates, in the form set out in Annex C6 to Appendix III;
—
individual guarantee voucher, in the form set out in Annex C3 to Appendix III.
19.2. Particulars of the certificates and the voucher shall be entered on transit declarations. 19.3. The period of validity of a comprehensive guarantee certificate or a guarantee waiver certificate shall not exceed two years. However, that period may be extended by the customs office of guarantee for one further period not exceeding two years. 19.4. From the effective date of revocation of an authorisation to use a comprehensive guarantee or revocation and cancellation of an undertaking provided in the case of a comprehensive guarantee, any issued certificates may not be used to place goods under the common transit procedure and shall be returned by the holder of the procedure to the customs office of guarantee without delay. 19.5. Each country shall provide to the Commission information about the means by which certificates that remain valid and have not yet been returned or that have been declared as stolen, lost or falsified may be identified. The Commission shall inform the other countries accordingly. |
|
20. |
Special loading lists 20.1. The customs authority can accept the transit declaration supplemented by loading lists which do not comply with all the requirements set out in Annex B5 to Appendix III. As of the dates of deployment of the upgrading of the NCTS referred to in the Annex to Implementing Decision (EU) 2016/578, the customs authority may accept the transit declaration supplemented by loading lists which do not comply with all the requirements set out in Annex B5a to Appendix III. Such lists can be used only where:
—
they are produced by the companies which use an electronic data-processing system to keep their records;
—
they are designed and completed in such a way that they can be used without difficulty by the customs authority;
—
they include, for each item, the information required in Annex B5 to Appendix III
►M39
; ◄
—
as of the dates of deployment of the upgrading of the NCTS referred to in the Annex to Implementing Decision (EU) 2016/578, they include, for each item, the information required in Annex B5a to Appendix III.
20.2. Descriptive lists drawn up for the purposes of carrying out dispatch/export formalities may also be allowed for use as loading lists under point 20.1 of this Annex, even where such lists are produced by the companies not using an electronic data-processing system to keep their records. 20.3. The holder of the procedure which uses an electronic data-processing system to keep his records and already uses special loading lists, may also use them for common transit operations involving only one type of goods if this facility is made necessary by the system of the holder of the procedure. |
|
21. |
Use of seals of a special type The holder of the procedure shall enter, against the heading ‘seals affixed’ in box ‘D. Control by office of departure’ of the transit declaration, the number and the individual seal identifiers of the seals affixed. |
|
22. |
Authorised consignor — Pre-authentication and formalities at departure 22.1. For the application of points 3 and 5 of this Annex the authorisation shall stipulate that box ‘C. Office of departure’ of the transit declaration shall:
—
be stamped in advance with the stamp of the customs office of departure and signed by an official of that office; or
—
be stamped by the authorised consignor with a special stamp approved by the competent authority and using the form set out in Annex B9 to Appendix III. The stamp may be pre-printed on the forms where a printer approved for that purpose is used.
The authorised consignor shall complete the box by entering the date on which the goods are consigned and shall allocate a number to the transit declaration in accordance with the rules laid down in the authorisation. 22.2. The customs authority may prescribe the use of forms bearing a distinctive mark as a means of identification. |
|
23. |
Authorised consignor — Security measures for the stamp The authorised consignor shall take all necessary measures to ensure the safekeeping of the special stamps or forms bearing the stamp of the customs office of departure or a special stamp. He shall inform the customs authority of the security measures he is taking to apply in accordance with the first paragraph. 23.1. In the event of the misuse by any person of forms stamped in advance with the stamp of the customs office of departure or with a special stamp, the authorised consignor shall be liable, without prejudice to any criminal proceedings, for the payment of duties and other charges payable in a particular country in respect of goods carried under cover of such forms unless he can satisfy the customs authority by whom he was authorised that he took the measures requested of him under point 23. |
|
24. |
Authorised consignor — Information to be entered on declarations 24.1. Not later than on consignment of the goods, the authorised consignor shall complete the transit declaration and, where necessary, enter in box 44 the itinerary prescribed in accordance with Article 33(2) of Appendix I and, in box ‘D. Control by office of departure’, the period prescribed in accordance with Article 34 of Appendix I within which the goods shall be presented at the customs office of destination, the identification measures applied and the following endorsement: ‘— Authorised consignor — 99206’. 24.2. Where the competent authority of the Contracting Party of departure checks a consignment before its departure, it shall record the fact on the declaration, in box ‘D. Control by office of departure’. 24.3. Following consignment, copy 1 of the SAD or the copy of the TAD shall be delivered without delay to the customs office of departure according to the rules laid down in the authorisation. The other copies shall accompany the goods in accordance with point 11 of this Annex. |
|
25. |
Authorised consignor — Waiver of signature 25.1. The authorised consignor may be allowed by the customs authority not to sign transit declarations bearing the special stamp referred to in Chapter II of Part II of this Annex which are made out by the electronic data-processing system. This waiver shall be subject to the condition that the authorised consignor has previously given the customs authority a written undertaking acknowledging that he is the holder of the procedure for all transit operations carried out under cover of transit declarations bearing the special stamp. 25.2. Transit declarations made out in accordance with point 25.1 of this Annex shall contain, in the box reserved for the signature of the holder of the procedure, the following phrase: ‘— Signature waived — 99207’. |
|
26. |
Authorised consignee — Obligations 26.1. When the goods arrive at a place specified in the authorisation the authorised consignee shall without delay inform the customs office of destination about such arrival. He shall indicate the date of arrival, the condition of any seals affixed and any irregularity on copies 4 and 5 of the SAD or on the copy of the TAD, which accompanied the goods, and deliver them to the customs office of destination according to the rules laid down in the authorisation. 26.2. The customs office of destination shall make the entries provided for in point 13 of this Annex on copies 4 and 5 of the SAD or on the copy of the TAD. |
APPENDIX II
CUSTOMS STATUS OF UNION GOODS AND PROVISIONS ON THE EURO
Article 1
This Appendix lays down the rules for implementing the provisions on ►M38 the customs status of Union goods ◄ and use of the euro in the Convention and Appendix I.
TITLE I
CUSTOMS STATUS OF UNION GOODS
CHAPTER 1
Scope
Article 2
Proof of ►M38 the customs status of Union goods ◄ may be provided in accordance with this Title only if the goods to which the proof relates are carried directly from one Contracting Party to another.
The following shall be deemed to be carried directly from one Contracting Party to another:
goods carried without passing through the territory of a third country;
goods carried through the territory of one or more third countries on condition that carriage through such countries is covered by a single transport document made out in a Contracting Party.
This Title shall not apply to goods which:
are intended for export from the Contracting Parties; or
are carried in accordance with the procedure for the international carriage of goods under cover of TIR carnets, unless:
Article 2a
Presumption of the customs status of Union goods
Goods having the customs status of Union goods which are carried by rail may move, without being subject to a customs procedure, from one point to another within the customs territory of the Union and be transported through the territory of a common transit country without alteration of their customs status, where:
CHAPTER II
Establishing the customs status of Union goods
Article 3
Competent office
For the purposes of this Chapter ‘competent office’ shall be taken to mean the authorities with responsibility for certifying ►M38 the customs status of Union goods ◄ .
Article 4
General provisions
The document used to prove ►M38 the customs status of Union goods ◄ may be issued retroactively provided the conditions for its issue are fulfilled. Where this is the case the following phrase shall be entered on it, in red:
Article 5
Definition
Article 6
Form
Article 7
Special loading lists
Use of such lists shall be authorised only where:
they are produced by firms which use an integrated electronic or automatic data processing system to keep their records;
they are designed and completed in such a way that they can be used without difficulty by the competent authorities;
they include, for each item, the information required under ►M39 Annex B5a ◄ to Appendix III.
Article 8
Issuance of a T2L document
At the request of the person concerned, a T2L document and, where necessary, any continuation sheets or loading lists used shall be endorsed by the competent office. Such endorsement shall comprise the following, which should, as far as possible, appear in box ‘C. Office of departure’ of the documents:
in the case of the T2L document, the name and stamp of the competent office, the signature of one of the officials at that office, the date of endorsement and either the registration number or the number of the dispatch or export declaration, where this is required;
in the case of the supplementary form or loading list, the number appearing on the T2L document. The number shall be entered by means of a stamp incorporating the name of the competent office or by hand. In the latter case it shall be accompanied by the official stamp of the said office.
The documents shall be returned to the person concerned as soon as the customs formalities for the dispatch of the goods to the country of destination have been completed.
Article 9
Invoice and transport document
The invoice or transport document referred to in paragraph 1 shall include at least the full name and address of the consignor or exporter, or of the person concerned where this person is not the consignor or exporter, the number and kind, marks and reference numbers of the packages, a description of the goods, the gross mass in kilograms and, where necessary, the container numbers.
The person concerned shall indicate clearly on the said document the symbol ‘T2L’ or ‘T2LF’, accompanied by his hand-written signature.
Where formalities are completed using official or private-sector data processing systems, the competent authorities shall authorise persons who so request to replace the signature provided for in paragraph 2 with a comparable technical device, using codes where applicable, which has the same legal consequences as a hand-written signature.
This facility shall be granted only if the technical and administrative conditions laid down by the competent authorities are met.
Article 10
Shipping company's manifest
The manifest shall include at least the following information:
the name and full address of the shipping company;
the identity of the vessel;
the place and date of loading;
the place of unloading.
For each consignment the manifest shall also include:
the reference for the bill of lading or other commercial document;
the number and kind, marks and reference numbers of the packages;
the normal trade description of the goods including sufficient detail to permit their identification;
the gross mass in kilogrammes;
where appropriate, the container identification numbers;
the following entries for the status of the goods:
▼M39 —————
Article 12
Carriage under cover of TIR carnets or ATA carnets
Article 13
Goods in baggage carried by a passenger
Where it is necessary to establish the customs status of Union goods in baggage carried by a passenger or contained in their luggage, the goods, provided that they are not intended for commercial use, are to be considered as having the customs status of Union goods when:
they are declared as ►M38 having the customs status of Union goods ◄ and there is no doubt as to the accuracy of the declaration;
or, in other cases, when they are dealt with in accordance with the provisions of this Chapter.
Article 14
Authorised issuer
Article 15
Contents of the authorisation
The authorisation shall specify in particular:
the office responsible for pre-authenticating the forms used for the documents concerned, as prescribed in Article 16(1)(a);
under what circumstances the authorised issuer shall justify the use of the forms;
the ►M38 excluded ◄ categories or movements of goods;
Article 16
Pre-authentication and formalities on departure
The authorisation shall stipulate that the front of the commercial documents concerned or box ‘C. Office of departure’ on the front of the forms used in ►M38 issuing ◄ the T2L document and any continuation sheet or sheets ►M39 shall ◄ be:
stamped in advance with the stamp of the office referred to in Article 15(1)(a) and signed by an official of that office; or
stamped by the authorised ►M38 issuer ◄ with a special metal stamp approved by the competent authorities and conforming to the specimen in Annex B9 to Appendix III. The stamp may be pre-printed on the forms if the printing is entrusted to a printer approved for that purpose.
The authorised ►M38 issuer ◄ shall take all necessary measures to ensure the safekeeping of the special stamps and/or forms bearing the stamp of the office of departure or a special stamp.
He shall inform the competent authorities of the security measures he is taking to apply the previous subparagraph.
Not later than on consignment of the goods, the ►M38 authorised issuer ◄ shall complete and sign the form. In addition, he shall enter in a clearly identifiable space on the commercial document used, or in the box of the T2L document reserved for control by the office of departure, the name of the competent office, the date of completion of the document, and the following endorsement:
Article 17
Waiving of the signature
Article 18
Shipping company's manifest transmitted by electronic data interchange
The authorisation referred to in paragraph 1 shall be granted only to international shipping companies which:
use electronic data interchange systems to transmit information between the ports of departure and destination in the Contracting Parties; and
operate a significant number of voyages between the countries on recognised routes.
On receipt of an application, the competent authorities of the country where the shipping company is established shall notify the authorities of the other countries in whose territories the ports of departure and destination are situated.
Provided no objection is received within ►M38 45 days ◄ of the date of notification, the competent authorities shall authorise use of the simplified procedure described in paragraph 4.
This authorisation shall be valid in the countries concerned and shall apply only to common transit operations between the ports to which it refers.
The simplification shall be operated as follows:
the manifest for the port of departure shall be transmitted by electronic data interchange system to the port of destination;
the shipping company shall enter in the manifest the information indicated in Article 10(2);
upon request, a printout of the data exchange manifest shall be presented to the competent authorities at the port of departure at the latest on the working day following the departure of the vessel and in any case before it arrives at its port of destination;
a printout of the data exchange manifest shall be presented to the competent authorities at the port of destination;
the competent authorities at the port of departure shall carry out audits based on risk analysis;
the competent authorities at the port of destination shall carry out audits based on risk analysis and, if necessary, transmit the relevant details of manifests to the competent authorities at the port of departure for verification.
Without prejudice to the provisions of Title IV of Appendix I:
Article 18a
Customs goods manifest
Article 19
Obligation to make a copy
The authorised ►M38 issuer ◄ shall make a copy of each commercial document or of each T2L document issued under this Section. The competent authorities shall specify the conditions under which the copy document shall be presented for purposes of control and retained for not less than ►M38 three years ◄ .
Article 20
Controls upon the authorised issuer
The competent authorities may carry out upon authorised ►M38 issuers ◄ any controls they consider necessary. The said ►M38 issuers ◄ shall furnish all the necessary information and facilities for this purpose.
CHAPTER III
Administrative assistance
Article 21
The competent authorities of the countries concerned shall assist one another in checking the authenticity and accuracy of the documents and verifying that the procedures used in accordance with the provisions of this Chapter to prove ►M38 the customs status of Union goods ◄ have been correctly applied.
TITLE II
PROVISIONS CONCERNING THE EURO
Article 22
The equivalent in national currencies of the amounts expressed in euros referred to in this Convention shall be calculated by using the exchange rate in force on the first working day of October, and shall be applied from 1 January of the following year.
If no rate is available for a particular national currency, the rate to be applied shall be that for the first day for which a rate has been published after the first working day of October. If a rate has not been published after the first working day of October, the rate to be applied shall be that of the last day prior to that date for which a rate has been published.
APPENDIX III
TRANSIT DECLARATIONS, TRANSIT ACCOMPANYING DOCUMENTS AND OTHER DOCUMENTS
Article 1
This Appendix covers the provisions, forms and specimens for making declarations and completing transit accompanying documents and other documents used in the common transit procedure in accordance with the requirements of Appendices I and II.
TITLE I
TRANSIT DECLARATION AND FORMS WHEN USING ELECTRONIC DATA-PROCESSING TECHNIQUES
Article 2
Transit declaration
A transit declaration as defined in Article 21(1) of Appendix I shall conform to the structure and particulars in Annex A1 using the codes in Annex A2.
Article 3
Transit accompanying document
The transit accompanying document shall ►M38 be provided using the form set out ◄ in Annex A3. It shall be produced and used according to the explanatory notes in Annex A4.
Article 4
List of items
The list of items shall ►M38 be provided using the form set out ◄ in Annex A5. It shall be produced and used according to the explanatory notes in Annex A6.
TITLE II
FORMS USED FOR:
Article 5
A self-copying process shall be used for the entries required:
in the case of Appendices 1 and 3, on the copies indicated in the SAD Convention, Annex II, Appendix 1;
in the case of Appendices 2 and 4, on the copies indicated in the SAD Convention, Annex II, Appendix 2.
The forms shall be completed and used:
as documents proving ►M38 the customs status of Union goods ◄ , in accordance with the explanatory note in Annex B2;
as transit declarations for the ►M38 business continuity procedure for transit ◄ or travellers, in accordance with the explanatory note in Annex B6.
In both cases the codes in Annexes A2, B1, B3 and B6 should be used where appropriate.
Article 6
TITLE III
FORMS OTHER THAN THE SINGLE ADMINISTRATIVE DOCUMENT AND THE TRANSIT ACCOMPANYING DOCUMENT
Article 7
Loading lists
Article 8
Transit advice note
▼M38 —————
Article 9
Receipt
▼M38 —————
Article 10
Individual guarantee
Article 11
Comprehensive guarantee and guarantee waiver certificates
The certificates shall be printed on white paper free of mechanical pulp and weighing at least 100 g/m2. They shall have a guilloche pattern background on both sides so as to reveal any falsification by mechanical or chemical means. The background shall be:
Article 12
Provisions common to all of Title III
ANNEX A1
EXPLANATORY NOTE ON THE USE OF TRANSIT DECLARATIONS, BY THE EXCHANGE OF EDI STANDARD MESSAGES (EDI TRANSIT DECLARATION)
TITLE I
GENERAL
►M38 The EDI transit declaration ◄ is presented electronically, except when the Convention provides otherwise.
The EDI transit declaration is based upon the particulars entered into the Convention of 20 May 1987 on simplification of formalities in trade in goods and corresponding to the different boxes of the Single Administrative Document (SAD) as defined in the present Annex and Annex B1, in association with or replaced by a code if appropriate.
This Annex contains exclusively the basic special requirements, which apply when the formalities are carried out by the exchange of the EDI standard messages. Furthermore the additional codes presented in Annex A2 are applicable. Annex B1 applies to the EDI transit declaration unless otherwise specified in this Annex or in Annex A2.
The detailed structure and content of the EDI transit declaration follow the technical specifications the competent authorities communicate to the ►M38 holder of the procedure ◄ in order to ensure the proper functioning of the system. These specifications are based upon the requirements laid down in this Annex.
This Annex describes the structure of the information exchange. ►M38 The EDI transit declaration ◄ is organised into data groups, which contain data attributes. The attributes are grouped together in such a way that they build up coherent logical blocks within the scope of the message. A data group indentation indicates that the data group depends on a lower indent data group.
When present, the appropriate number of the box on the SAD is noted.
The term ‘number’ in the explanation of a data group indicates how many times the data group may be used in the transit declaration.
The term ‘type/length’ in the explanation of an attribute indicates the requirements for the data type and the data length. The codes for the data types are as follows:
|
a |
alphabetic |
|
n |
numeric |
|
an |
alphanumeric |
The number following the code indicates the admissible data length. The following applies:
The optional two dots before the length indicator mean that the data has no fixed length, but it can have up to a number of digits, as specified by the length indicator. A comma in the data length means that the attribute can hold decimals, the digit before the comma indicates the total length of the attribute, the digit after the comma indicates the maximum number of digits after the decimal point.
TITLE II
PART ICULARS TO BE ENTERED IN THE TRANSIT DECLARATION AND STRUCTURE OF THE EDI TRANSIT DECLARATION
CHAPTER I
Required particulars
This annex contains the unit of the data, based on those of the SAD Convention, likely to be required by the various countries.
CHAPTER II
Structure
A. Table of the data groups
▼M38 —————
B. Particulars on the data of the transit declaration
TRANSIT OPERATION
Number: 1
The data group shall be used.
LRN
Type/Length: an ..22
The local reference number (LRN) shall be used. It is nationally defined and allocated by the user in agreement with the competent authorities to identify each single declaration.
Declaration type (box 1)
Type/Length: an ..5
The attribute shall be used.
The following must be entered:
where goods are required to move under the T2 procedure: T2 or T2F;
where goods are required to move under the T1 procedure: T1;
for the consignments referred to in ►M38 Article 28 ◄ of Appendix I: T-.
▼M38 —————
Total number of items (box 5)
Type/Length: n ..5
The attribute shall be used.
Total number of packages (box 6)
Type/Length: n ..7
Use of this attribute is optional. The total number of packages is equal to the sum of all ‘Number of packages’, all ‘Number of pieces’ plus a value of ‘1’ for each declared ‘bulk’.
Country of dispatch (box 15a)
Type/Length: a2
Country from which the goods are to be dispatched/exported
The attribute shall be used if only one country of dispatch is declared. The country codes presented in Annex A2 shall be used. In this case the attribute ‘Country of dispatch’ of the data group ‘GOODS ITEM’ cannot be used. If more than one country of dispatch is declared, this attribute of the data group ‘TRANSIT OPERATION’ cannot be used. In this case the attribute ‘Country of dispatch’ of the data group ‘GOODS ITEM’ shall be used.
Destination country (box 17a)
Type/Length: a2
Enter the name of the country concerned.
The attribute shall be used if only one country of destination is declared. The country codes presented in Annex A2 shall be used. In this case the attribute ‘Destination country’ of the data group ‘GOODS ITEM’ cannot be used. If more than one country of destination is declared, this attribute of the data group ‘TRANSIT OPERATION’ cannot be used. In this case the attribute ‘Destination country’ of the data group ‘GOODS ITEM’ shall be used.
Identity at departure (box 18)
Type/Length: an ..27
Enter the means of identification, e.g. the registration number(s) or name, of the means of transport (lorry, ship, railway wagon, aircraft) on which the goods are directly loaded on presentation at ►M38 the customs office of departure ◄ , using the codes laid down for the purpose. For example, where a tractor and a trailer with different vehicle registration numbers are used, enter the registration numbers of both tractor and trailer.
However, where goods are carried in containers that are to be transported by road vehicles, the competent authorities may authorise the ►M38 holder of the procedure ◄ to leave this box blank where the logistics at the point of departure may make it impossible to provide the identity of the means of transport at the time of establishment of the transit declaration, and where they can ensure that the proper information concerning the means of transport will be subsequently entered in box 55.
Where goods are moved by fixed transport installations, do not enter anything for registration number.
Identity at departure LNG
Type/Length: a2
The language code presented in Annex A2 shall be used to define the language (LNG) if the corresponding free text field is used.
Nationality at departure (box 18)
Type/Length: a2
The country code presented in Annex A2 shall be used.
Enter the nationality of the means of transport (lorry, ship, railway wagon, aircraft) on which the goods are directly loaded on presentation at ►M38 the customs office of departure ◄ , (or that of the means of transport providing propulsion for the whole if it is made up of several means of transport), using the codes laid down for the purpose. For example, where a tractor and a trailer with different vehicle registration numbers are used, enter the registration numbers of both tractor and trailer, and the nationality of the tractor.
However, where goods are carried in containers that are to be transported by road vehicles, the competent authorities may authorise the ►M38 holder of the procedure ◄ to leave this box blank where the logistics at the point of departure may make it impossible to provide the nationality of the means of transport at the time of establishment of the transit declaration, and where they can ensure that the proper information concerning the means of transport will be subsequently entered in box 55.
Where goods are moved by fixed installations or carried by rail, do not enter anything for nationality.
In other cases, declaration of the nationality is optional for the Contracting Parties.
Container (box 19)
Type/Length: n1
Use the codes provided for the purpose to enter particulars of the presumed situation at the border of the Contracting Party in whose territory ►M38 the customs office of departure ◄ is located, as known at the time the goods were placed under the common transit procedure.
The following codes shall be used
|
0 |
: |
no. |
|
1 |
: |
yes. |
Nationality crossing border (box 21)
Type/Length: a2
The requirement to enter the nationality is obligatory.
However, where goods are carried by rail or moved by fixed installation, do not enter anything for registration number or nationality.
The country code presented in Annex A2 shall be used.
Identity crossing border (box 21
Type/Length: an ..27
Using the appropriate code, enter the type (lorry, ship, railway wagon, aircraft, etc.) and the means of identification (e.g. registration number or name) of the active means of transport (i.e. the means of transport providing propulsion) which it is presumed will be used at the frontier crossing point on exit from the Contracting Party where ►M38 the customs office of departure ◄ is located, followed by the code for the nationality of the means of transport, as known at the time the goods were placed under the common transit procedure.
Where combined transport or several means of transport are used, the active means of transport is the unit which provides propulsion for the whole combination. For example, when a lorry is on a sea-going vessel, the active means of transport is the ship and where a combination of a tractor and a trailer is used, the active means of transport is the tractor.
Where goods are carried by rail or fixed installations, do not enter anything for registration number.
Use of this attribute is optional for the Contracting Parties.
Identity crossing border LNG
Type/Length: a2
The language code presented in Annex A2 shall be used to define the language (LNG) if the corresponding free text field is used.
Type of transport crossing border (box 21)
Type/Length: n ..2
Use of this attribute is optional for the Contracting Parties.
Transport mode at border (box 25)
Type/Length: n ..2
Use the codes provided for the purpose to enter the mode of transport which it is presumed will provide the active means of transport on which the goods will leave the territory of the Contracting Party in which ►M38 the customs office of departure ◄ is located.
Use of this attribute is optional for the Contracting Parties.
Inland transport mode (box 26)
Type/Length: n ..2
Use of this attribute is optional for the Contracting Parties. It has to be used according to the explanatory note concerning box 25 presented in Annex A2.
Loading place (box 27)
Type/Length: an ..17
Use of this attribute is optional for the Contracting Parties.
Agreed location code (box 30)
Type/Length: an ..17
The attribute can not be used, if the data group ‘CONTROL RESULT’ is used. If this data group is not used the attribute is optional. If this attribute is used the precise indication of the place in coded form where the goods can be examined is necessary. The attributes ‘Agreed location of goods’/‘Agreed location code’, ‘Authorised location of goods’ and ‘Customs sub place’ can not be used at the same time.
Agreed location of goods (box 30)
Type/Length: an ..35
The attribute cannot be used, if the data group ‘CONTROL RESULT’ is used. If this data group is not used the attribute is optional. If this attribute is used the precise indication of the place where the goods can be examined is necessary. The attributes ‘Agreed location of goods’/‘Agreed location code’, ‘Authorised location of goods’ and ‘Customs sub place’ can not be used at the same time.
Agreed location of goods LNG
Type/Length: a2
The language code presented in Annex A2 shall be used to define the language (LNG) if the corresponding free text field is used.
Authorised location of goods (box 30)
Type/Length: an ..17
The attribute is optional, if the data group ‘CONTROL RESULT’ is used. If the attribute is used precise indication of the place where the goods can be examined is necessary. If the data group ‘CONTROL RESULT’ is not used the attribute can not be used. The attributes ‘Agreed location of goods’/‘Agreed location code’, ‘Authorised location of goods’ and ‘Customs sub place’ can not be used at the same time.
Customs sub place (box 30)
Type/Length: an ..17
The attribute can not be used, if the data group ‘CONTROL RESULT’ is used. If this data group is not used the attribute is optional. If this attribute is used the precise indication of the place where the goods can be examined is necessary. The attributes ‘Agreed location of goods’/‘Agreed location code’, ‘Authorised location of goods’ and ‘Customs sub-place’ can not be used at the same time.
Total gross mass (box 35)
Type/Length: n ..11,3
The attribute shall be used.
Transit accompanying document language code
Type/Length: a2
The language code presented in Annex A2 shall be used to define the language of the transit accompanying document.
Dialogue language indicator at departure
Type/Length: a2
Use of the language code presented in Annex A2 is optional. If this attribute is not used the system will use the default language of ►M38 the customs office of departure ◄ .
Declaration date (box 50)
Type/Length: n8
The attribute shall be used.
Declaration place (box 50)
Type/Length: an ..35
The attribute shall be used.
Declaration place LNG
Type/Length: a2
The language code presented in Annex A2 shall be used to define the language (LNG) of the corresponding free text field.
TRADER consignor (box 2)
Number: 1
This data group is used when only one consignor is declared. In this case the data group ‘TRADER consignor’ of the data group ‘GOODS ITEM’ cannot be used.
Name (box 2)
Type/Length: an ..35
The attribute shall be used.
Street and number (box 2)
Type/Length: an ..35
The attribute shall be used.
Country (box 2)
Type/Length: a2
The country code presented in Annex A2 shall be used.
Postcode (box 2)
Type/Length: an ..9
The attribute shall be used.
City (box 2)
Type/Length: an ..35
The attribute shall be used.
NAD LNG
Type/Length: a2
The language code presented in Annex A2 shall be used to define the language of name and address (NAD LNG).
TIN (box 2)
Type/Length: an ..17
Use of this attribute to insert the trader identification number (TIN) is optional for the Contracting Parties.
TRADER Consignee (box 8)
Number: 1
The data group shall be used when there is only one consignee declared and the attribute ‘Destination country’ of the data group ‘TRANSIT OPERATION’ contains a ‘country’ as defined in the Convention. In this case the data group ‘TRADER Consignee’ of the data group ‘GOODS ITEM’ can not be used.
Name (box 8)
Type/Length: an ..35
The attribute shall be used.
Street and number (box 8)
Type/Length: an ..35
The attribute shall be used.
Country (box 8)
Type/Length: a2
The country code presented in Annex A2 shall be used.
Postcode (box 8)
Type/Length: an ..9
The attribute shall be used.
City (box 8)
Type/Length: an ..35
The attribute shall be used.
NAD LNG
Type/Length: a2
The language code presented in Annex A2 shall be used to define the language of name and address (NAD LNG).
TIN (box 8)
Type/Length: an ..17
Use of this attribute to insert the trader identification number (TIN) is optional for the Contracting Parties.
GOODS ITEM
Number: 999
The data group shall be used.
Declaration type (ex box 1)
Type/Length: an ..5
The attribute shall be used, if the ►M38 code ◄ ‘T-’ was used for the attribute ‘Declaration type’ of the data group ‘TRANSIT OPERATION’. In other cases this attribute can not be used.
Country of dispatch (ex box 15a)
Type/Length: a2
Country from which the goods are to be dispatched/exported
The attribute shall be used if more than one country of dispatch is declared. The country codes presented in Annex A2 shall be used. The attribute ‘Country of dispatch’ of the data group ‘TRANSIT OPERATION’ cannot be used. If only one country of dispatch is declared the corresponding attribute of the data group ‘TRANSIT OPERATION’ shall be used.
Destination country (ex box 17a)
Type/Length: a2
The attribute shall be used if more than one country of destination is declared. The country codes presented in Annex A2 shall be used. The attribute ‘Destination country’ of the data group ‘TRANSIT OPERATION’ cannot be used. If only one country of destination is declared the corresponding attribute of the data group ‘TRANSIT OPERATION’ shall be used.
Textual description (box 31)
Type/Length: an ..140
The attribute shall be used.
The normal trade description must be entered in all cases. This description must include all the details needed to allow identification of the goods. Where the attribute ‘Commodity code’ has to be completed, the description must be expressed in sufficiently precise terms to allow classification of the goods. This attribute must also show the particulars required under any specific rules (e.g. on excise duties). If containers are used, the identifying marks of the container should also be entered in this box.
Textual description LNG
Type/Length: a2
The language code presented in Annex A2 shall be used to define the language (LNG) of the corresponding free text field.
Item number (box 32)
Type/Length: n ..5
Give the number of the item shown in the list of items declared in the attribute ‘Total number of items’.
The attribute shall be used, even if the number ‘1’ was used for the attribute ‘Total number of items’ of the data group ‘TRANSIT OPERATION’. In this case the number ‘1’ shall be used for this attribute. Each item number is unique throughout the declaration.
Commodity code (box 33)
Type/Length: n ..8
The attribute shall be used with at least 4 and up to 8 digits.
This box must be completed where:
the same person makes a transit declaration at the same time as, or following, a customs declaration which includes a commodity code.
▼M38 —————
Enter the code for the goods.
In T2 and T2F transit declarations made in ►M38 a common transit country ◄ this box does not need be completed unless the preceding transit declaration includes a commodity code.
If it does, give the code entered in the corresponding declaration.
In all other cases use of this box is optional.
Gross mass (box 35)
Type/Length: n ..11,3
Enter the gross mass, in kilograms, of the goods described in the corresponding box 31. The gross mass is the aggregate mass of the goods including all packing but excluding containers and other transport equipment.
This attribute is optional when goods of different type covered by the same declaration are packed together in such a way that it is impossible to determine the gross mass of each type of goods.
Net mass (box 38)
Type/Length: n ..11,3
Enter the net mass, in kilograms, of the goods described in the corresponding attribute. The net mass is the mass of the goods themselves excluding all packaging.
Use of this attribute is optional for the Contracting Parties.
— TRADER Consignor (ex box 2)
Number: 1
The data group ‘TRADER Consignor’ cannot be used when only one consignor is declared. In this case the data group ‘TRADER Consignor’ on ‘TRANSIT OPERATION’ level is used.
Name (ex box 2)
Type/Length: an ..35
The attribute shall be used.
Street and number (ex box 2)
Type/Length: an ..35
The attribute shall be used.
Country (ex box 2)
Type/Length: a2
The country code presented in Annex A2 shall be used.
Postcode (ex box 2)
Type/Length: an ..9
The attribute shall be used.
City (ex box 2)
Type/Length: an ..35
The attribute shall be used.
NAD LNG
Type/Length: a2
The language code presented in Annex A2 shall be used to define the language of name and address (NAD LNG).
TIN (ex box 2)
Type/Length: an ..17
Use of this attribute to insert the trader identification number (TIN) is optional for the Contracting Parties.
— TRADER Consignee (ex box 8)
Number: 1
The data group shall be used when more than one consignee is declared and the attribute ‘Destination country’ of the data group ‘GOODS ITEM’ contains a ‘country’ as defined in the Convention. When only one consignee is declared, the data group ‘TRADER Consignee’ of the data group ‘GOODS ITEM’ can not be used.
Name (ex box 8)
Type/Length: an ..35
The attribute shall be used.
Street and number (ex box 8)
Type/Length: an ..35
The attribute shall be used.
Country (ex box 8)
Type/Length: a2
The country code presented in Annex A2 shall be used.
Postcode (ex box 8)
Type/Length: an ..9
The attribute shall be used.
City (ex box 8)
Type/Length: an ..35
The attribute shall be used.
NAD LNG
Type/Length: a2
The language code presented in Annex A2 shall be used to define the language of name and address (NAD LNG).
TIN (ex box 8)
Type/Length: an ..17
Use of this attribute to insert the trader identification number (TIN) is optional for the Contracting Parties.
— CONTAINERS (box 31)
Number: 99
If the attribute ‘Container’ of the data group ‘TRANSIT OPERATION’ contains the code ‘1’ the data group shall be used.
Container numbers (box 31)
Type/Length: an ..11
The attribute shall be used.
▼M38 —————
— PACKAGES (box 31)
Number: 99
The data group shall be used.
Marks and numbers of packages (box 31)
Type/Length: an ..42
The attribute shall be used if the attribute ‘Kind of packages’ contains other codes presented in Annex A2 than those for bulk (VQ, VG, VL, VY, VR or VO) or for ‘unpacked’ (NE, NF, NG). It is optional if the attribute ‘Kind of packages’ contains one of the previously mentioned codes.
Marks and numbers of packages LNG
Type/Length: a2
The language code presented in Annex A2 shall be used to define the language (LNG) if the corresponding free text field is used.
Kind of packages (box 31)
Type/Length: an2
The package codes referred to in Annex A2 shall be used.
Number of packages (box 31)
Type/Length: n ..5
The attribute shall be used if the attribute ‘Kind of packages’ contains other codes presented in Annex A2 than those for bulk (VQ, VG, VL, VY, VR or VO) or for ‘ ►M38 Unpacked ◄ ’ (NE, NF, NG). It cannot be used if the attribute ‘Kind of packages’ contains one of the previously mentioned codes.
Number of pieces (box 31)
Type/Length: n ..5
The attribute shall be used if the attribute ‘Kind of packages’ contains a code presented in Annex A2 for ‘ ►M38 Unpacked ◄ ’ (NE). In other cases this attribute cannot be used.
— PREVIOUS ADMINISTRATIVE REFERENCES (box 40)
Number: 9
Enter the reference for the preceding ►M38 customs procedure ◄ or for any corresponding customs documents.
The data group shall be used if the attribute ‘Declaration type’ of the data groups ‘TRANSIT OPERATION’ or ‘GOODS ITEM’ contains the Code ‘T2’ or ‘T2F’ and the country of ►M38 the customs office of departure ◄ is ►M38 a common transit country ◄ as defined in the Convention.
Previous document type (box 40)
Type/Length: an ..6
If the data group is used at least one previous document code presented in Annex A2 shall be used.
Previous document reference (box 40)
Type/Length: an ..20
The reference of the previous document shall be used.
Previous document reference LNG
Type/Length: a2
The language code presented in Annex A2 shall be used to define the language (LNG) of the corresponding free text field.
Complement of information (box 40)
Type/Length: an ..26
Use of this attribute is optional for the Contracting Parties.
Complement of information LNG
Type/Length: a2
The language code presented in Annex A2 shall be used to define the language (LNG) if the corresponding free text field is used.
— PRODUCED DOCUMENTS/CERTIFICATES (box 44)
Number: 99
Enter the details required under any specific rules applicable in the country of dispatch/export together with the reference numbers of the documents produced in support of the declaration (e.g. ►M38 ————— ◄ the export licence or permit number, the data required under veterinary and phytosanitary regulations or the bill of lading number).
Use of this data group is optional for the Contracting Parties. If the data group is used at least one of the following attributes shall be used.
Document type (box 44)
Type/Length: an ..3
The code presented in Annex A2 shall be used.
Document reference (box 44)
Type/Length: an ..20
Document reference LNG
Type/Length: a2
The language code presented in Annex A2 shall be used to define the language (LNG) if the corresponding free text field is used.
Complement of information (box 44)
Type/Length: an ..26
Complement of information LNG
Type/Length: a2
The language code presented in Annex A2 shall be used to define the language (LNG) if the corresponding free text field is used.
— SPECIAL MENTIONS (box 44)
Number: 99
Use of this data group is optional for the Contracting Parties. If the data group is used either the attribute ‘Additional information id’ or ‘Text’ shall be used.
Additional information id (box 44)
Type/Length: an ..3
The code presented in Annex A2 shall be used to insert the identification (id) of the additional information.
Export from EU (box 44)
Type/Length: n1
If the attribute ‘Additional information id’ contains the code ‘DG0’ or ‘DG1’ the attribute ‘Export from ►M38 EU ◄ ’ or ‘Export from country’ shall be used. Both attributes cannot be used at the same time. In other cases the attribute cannot be used. If this attribute is used the following codes are to be used:
|
0 |
= |
no, |
|
1 |
= |
yes. |
Export from country (box 44)
Type/Length: a2
If the attribute ‘Additional information id’ contains the code ‘DG0’ or ‘DG1’ the attribute ‘Export from ►M38 EU ◄ ’ or ‘Export from country’ shall be used. Both attributes cannot be used at the same time. In other cases the attribute cannot be used. If this attribute is used the country code presented in Annex A2 shall be used.
Text (box 44)
Type/Length: an ..70
Text LNG
Type/Length: a2
The language code presented in Annex A2 shall be used to define the language (LNG) if the corresponding free text field is used.
CUSTOMS OFFICE of departure (box C)
Number: 1
The data group shall be used.
Reference number (box C)
Type/Length: an8
The code presented in Annex A2 shall be used.
HOLDER OF THE PROCEDURE (box 50)
Number: 1
The data group shall be used.
TIN (box 50)
Type/Length: an ..17
The attribute shall be used where the data group ‘CONTROL RESULT’ contains the code A3 or where the attribute ‘GRN’ is used.
Name (box 50)
Type/Length: an ..35
The attribute shall be used if the attribute ‘TIN’ is used and the other attributes of this data group are not already known by the system.
Street and number (box 50)
Type/Length: an ..35
The attribute shall be used if the attribute ‘TIN’ is used and the other attributes of this data group are not already known by the system.
Country (box 50)
Type/Length: a2
The country code presented in Annex A2 shall be used if the attribute ‘TIN’ is used and the other attributes of this data group are not already known by the system.
Postcode (box 50)
Type/Length: an ..9
The attribute shall be used if the attribute ‘TIN’ is used and the other attributes of this data group are not already known by the system.
City (box 50)
Type/Length: an ..35
The attribute shall be used if the attribute ‘TIN’ is used and the other attributes of this data group are not already known by the system.
NAD LNG
Type/Length: a2
The language code presented in Annex A2 shall be used to define the language of name and address (NAD LNG) if the corresponding free text fields are used.
REPRESENTATIVE (box 50)
Number: 1
The data group shall be used if ►M38 the holder of the procedure ◄ makes use of an authorised representative.
Name (box 50)
Type/Length: an ..35
The attribute shall be used.
Representative capacity (box 50)
Type/Length: a ..35
Use of this attribute is optional.
Representative capacity LNG
Type/Length: a2
The language code presented in Annex A2 shall be used to define the language (LNG) if the corresponding free text field is used.
CUSTOMS OFFICE of transit (box 51)
Number: 9
Enter ►M38 the intended customs office of entry ◄ into each Contracting Party whose territory is to be transited in the course of carriage or, where the operation involves transiting territory other than that of the Contracting Parties, ►M38 the customs office of exit ◄ by which the means of transport will leave the territory of the Contracting Parties.
The data group has to be used at least once if different Contracting Parties are declared for departure and destination.
Reference number (box 51)
Type/Length: an8
The code presented in Annex A2 shall be used.
CUSTOMS OFFICE of destination (box 53)
Number: 1
The data group shall be used.
Reference number (box 53)
Type/Length: an8
Only the structure of the code is indicated in Annex A2; ►M38 the customs offices of destination ◄ are listed in the competent offices list (COL on the Europa site) for common transit operations.
The code presented in Annex A2 shall be used.
TRADER authorised consignee (box 53)
Number: 1
The data group can be used to indicate that the goods will be delivered to an authorised consignee.
TIN authorised consignee (box 53)
Type/Length: an ..17
The attribute shall be used to insert the trader identification number (TIN).
CONTROL RESULT (box D)
Number: 1
The data group shall be used if an authorised consignor lodges the declaration.
Control result code (box D)
Type/Length: an2
The code A3 shall be used.
Date limit (box D)
Type/Length: n8
The attribute shall be used.
SEALS INFORMATION (box D)
Number: 1
The data group shall be used if an authorised consignor lodges a declaration for which his authorisation requires the use of seals or a ►M38 holder of the procedure ◄ is granted use of seals of a special type.
Seals number (box D)
Type/Length: n ..4
The attribute shall be used.
— SEALS ID (box D)
Number: 99
The data group shall be used for the identification (id) of seals.
Seals identity (box D)
Type/Length: an ..20
The attribute shall be used.
Seals identity LNG
Type/Length: a2
The language code (LNG) presented in Annex A2 shall be used.
GUARANTEE
Number: 9
The data group shall be used.
Guarantee type (box 52)
Type/Length: an1
The code presented in Annex A2 shall be used.
— GUARANTEE REFERENCE
Number: 99
The data group shall be used if the attribute ‘Guarantee type’ contains the code ‘0’, ‘1’, ‘2’,‘4’ or ‘9’.
GRN (box 52)
Type/Length: an ..24
The attribute shall be used to insert the guarantee reference number (GRN) if the attribute ‘Guarantee type’ contains the code ‘0’, ‘1’, ‘2’, ‘4’ or ‘9’. In this case the attribute ‘Other guarantee reference’ cannot be used.
The ‘guarantee reference number’ (GRN) is allocated by ►M38 the customs office of guarantee ◄ to identify each single guarantee and it is structured as follows:
|
Field |
Content |
Field type |
Examples |
|
1 |
Last two digits of the year in which the guarantee was accepted (YY) |
Numeric 2 |
97 |
|
2 |
Identifier of the country where the guarantee is lodged (ISO alpha 2 country code) |
Alphabetic 2 |
IT |
|
3 |
Unique identifier for the acceptance given by ►M38 the customs office of guarantee ◄ per year and country |
Alphanumeric 12 |
1234AB788966 |
|
4 |
Check digit |
Alphanumeric 1 |
8 |
|
5 |
Identifier of the individual guarantee by means of voucher (1 letter + 6 digits) or NULL for other guarantee types |
Alphanumeric 7 |
A001017 |
Field 1 and 2 as explained above.
Field 3 has to be filled with a unique identifier per year and country for the acceptance of the guarantee given by ►M38 the customs office of guarantee ◄ . National administrations which want to have the customs office reference number of ►M38 the customs office of guarantee ◄ included in the GRN could use up to the first six characters to insert the national number of ►M38 the customs office of guarantee ◄ .
Field 4 has to be filled with a value that is a check digit for the fields 1 to 3 of the GRN. This field allows detection of any error when capturing the first four fields of the GRN.
Field 5 is only used when the GRN is related to an individual guarantee by means of vouchers registered in ►M38 the electronic transit system ◄ . In that case, this field has to be filled with the identifier of the voucher.
Other guarantee reference (box 52)
Type/Length: an ..35
The attribute shall be used if the attribute ‘Guarantee type’ contains other codes than ‘0’, ‘1’,‘2’, ‘4’ or ‘9’. In this case the attribute ‘GRN’ cannot be used.
Access code
Type/Length: an4
The attribute shall be used when the attribute ‘GRN’ is used; otherwise this attribute is optional for the countries. Depending on the type of guarantee, it is issued by the office of guarantee, the guarantor or the ►M38 holder of the procedure ◄ and used to secure a specific guarantee.
— ►M38 VALIDITY LIMITATION (EU) ◄
Number: 1
Not valid for EU (box 52)
Type/Length: n1
The following codes are to be used:
|
0 |
= |
no, |
|
1 |
= |
yes. |
— ►M38 VALIDITY LIMITATION NON EU ◄
Number: 99
Not valid for other Contracting Parties (box 52)
Type/Length: a2
The country code presented in Annex A2 shall be used to indicate the Contracting party. The code of a Member State of the European ►M38 Union ◄ cannot be used.
ANNEX A2
ADDITIONAL CODES FOR THE COMPUTERISED TRANSIT SYSTEM
This Annex shall cease to apply as of the dates of deployment of the upgrading of the NCTS referred to in the Annex to Implementing Decision (EU) 2016/578.
1. COUNTRY CODES (CNT)
|
Field |
Content |
Field type |
Example |
|
1 |
ISO alpha 2 country code. |
Alphabetic 2 |
IT |
The ‘ISO alpha-2 country code’ as specified in ISO - 3166 - 1 of 1997 and subsequent updates shall apply.
2. LANGUAGE CODE
ISO alpha 2 codification as specified in ISO - 639: 1988 shall apply.
3. COMMODITY CODE (COM)
|
Field |
Content |
Field type |
Examples |
|
1 |
6 Digit code of the Harmonised System (HS6) |
Numeric 6 (left aligned) |
010290 |
The six digits of the Harmonised System have to be entered (HS6). The commodity code may be expanded to 8 digits for national use.
▼M38 —————
5. PACKAGE CODE
(UN/ECE Recommendation No 21/Rev.8.1 of 12 July 2010)
|
Aerosol |
AE |
|
Ampoule, non-protected |
AM |
|
Ampoule, protected |
AP |
|
Atomizer |
AT |
|
Bag |
BG |
|
Bag, flexible container |
FX |
|
Bag, gunny |
GY |
|
Bag, jumbo |
JB |
|
Bag, large |
ZB |
|
Bag, multiply |
MB |
|
Bag, paper |
5M |
|
Bag, paper, multi-wall |
XJ |
|
Bag, paper, multi-wall, water resistant |
XK |
|
Bag, plastic |
EC |
|
Bag, plastics film |
XD |
|
Bag, polybag |
44 |
|
Bag, super bulk |
43 |
|
Bag, textile |
5L |
|
Bag, textile, sift proof |
XG |
|
Bag, textile, water resistant |
XH |
|
Bag, textile, without inner coat/liner |
XF |
|
Bag, tote |
TT |
|
Bag, woven plastic |
5H |
|
Bag, woven plastic, sift proof |
XB |
|
Bag, woven plastic, water resistant |
XC |
|
Bag, woven plastic, without inner coat/liner |
XA |
|
Bale, compressed |
BL |
|
Bale, non-compressed |
BN |
|
Ball |
AL |
|
Balloon, non-protected |
BF |
|
Balloon, protected |
BP |
|
Bar |
BR |
|
Barrel |
BA |
|
Barrel, wooden |
2C |
|
Barrel, wooden, bung type |
QH |
|
Barrel, wooden, removable head |
QJ |
|
Bars, in bundle/bunch/truss |
BZ |
|
Basin |
BM |
|
Basket |
BK |
|
Basket, with handle, cardboard |
HC |
|
Basket, with handle, plastic |
HA |
|
Basket, with handle, wooden |
HB |
|
Belt |
B4 |
|
Bin |
BI |
|
Block |
OK |
|
Board |
BD |
|
Board, in bundle/bunch/truss |
BY |
|
Bobbin |
BB |
|
Bolt |
BT |
|
Bottle, gas |
GB |
|
Bottle, non-protected, bulbous |
BS |
|
Bottle, non-protected, cylindrical |
BO |
|
Bottle, protected bulbous |
BV |
|
Bottle, protected cylindrical |
BQ |
|
Bottlecrate/bottlerack |
BC |
|
Box |
BX |
|
Box, aluminium |
4B |
|
Box, Commonwealth Handling Equipment Pool (CHEP), Eurobox |
DH |
|
Box, fibreboard |
4G |
|
Box, for liquids |
BW |
|
Box, natural wood |
4C |
|
Box, plastic |
4H |
|
Box, plastic, expanded |
QR |
|
Box, plastic, solid |
QS |
|
Box, plywood |
4D |
|
Box, reconstituted wood |
4F |
|
Box, steel |
4A |
|
Box, wooden, natural wood, ordinary |
QP |
|
Box, wooden, natural wood, with sift proof walls |
|
|
Bucket |
BJ |
|
Bulk, gas (at 1 031 mbar and 15 °C) |
VG |
|
Bulk, liquefied gas (at abnormal temperature/pressure) |
VQ |
|
Bulk, liquid |
VL |
|
Bulk, scrap metal |
VS |
|
Bulk, solid, fine particles (‘powders’) |
VY |
|
Bulk, solid, granular particles (‘grains’) |
VR |
|
Bulk, solid, large particles (‘nodules’) |
VO |
|
Bunch |
BH |
|
Bundle |
BE |
|
Bundle, wooden |
8C |
|
Butt |
BU |
|
Cage |
CG |
|
Cage, Commonwealth Handling Equipment Pool (CHEP) |
DG |
|
Cage, roll |
CW |
|
Can, cylindrical |
CX |
|
Can, rectangular |
CA |
|
Can, with handle and spout |
CD |
|
Canister |
CI |
|
Canvas |
CZ |
|
Capsule |
AV |
|
Carboy, non-protected |
CO |
|
Carboy, protected |
CP |
|
Card |
CM |
|
Cart, flatbed |
FW |
|
Carton |
CT |
|
Cartridge |
CQ |
|
Case |
CS |
|
Case, car |
7A |
|
Case, isothermic |
EI |
|
Case, skeleton |
SK |
|
Case, steel |
SS |
|
Case, with pallet base |
ED |
|
Case, with pallet base, cardboard |
EF |
|
Case, with pallet base, metal |
EH |
|
Case, with pallet base, plastic |
EG |
|
Case, with pallet base, wooden |
EE |
|
Case, wooden |
7B |
|
Cask |
CK |
|
Chest |
CH |
|
Churn |
CC |
|
Clamshell |
AI |
|
Coffer |
CF |
|
Coffin |
CJ |
|
Coil |
CL |
|
Composite packaging, glass receptacle |
6P |
|
Composite packaging, glass receptacle in aluminium crate |
YR |
|
Composite packaging, glass receptacle in aluminium drum |
YQ |
|
Composite packaging, glass receptacle in expandable plastic pack |
YY |
|
Composite packaging, glass receptacle in fibre drum |
YW |
|
Composite packaging, glass receptacle in fibreboard box |
YX |
|
Composite packaging, glass receptacle in plywood drum |
YT |
|
Composite packaging, glass receptacle in solid plastic pack |
YZ |
|
Composite packaging, glass receptacle in steel crate box |
YP |
|
Composite packaging, glass receptacle in steel drum |
YN |
|
Composite packaging, glass receptacle in wickerwork hamper |
YV |
|
Composite packaging, glass receptacle in wooden box |
YS |
|
Composite packaging, plastic receptacle |
6H |
|
Composite packaging, plastic receptacle in aluminium crate |
YD |
|
Composite packaging, plastic receptacle in aluminium drum |
YC |
|
Composite packaging, plastic receptacle in fibre drum |
YJ |
|
Composite packaging, plastic receptacle in fibreboard box |
YK |
|
Composite packaging, plastic receptacle in plastic drum |
YL |
|
Composite packaging, plastic receptacle in plywood box |
YH |
|
Composite packaging, plastic receptacle in plywood drum |
YG |
|
Composite packaging, plastic receptacle in solid plastic box |
YM |
|
Composite packaging, plastic receptacle in steel crate box |
YB |
|
Composite packaging, plastic receptacle in steel drum |
YA |
|
Composite packaging, plastic receptacle in wooden box |
YF |
|
Cone |
AJ |
|
Container, flexible |
1F |
|
Container, gallon |
GL |
|
Container, metal |
ME |
|
Container, not otherwise specified as transport equipment |
CN |
|
Container, outer |
OU |
|
Cover |
CV |
|
Crate |
CR |
|
Crate, beer |
CB |
|
Crate, bulk, cardboard |
DK |
|
Crate, bulk, plastic |
DL |
|
Crate, bulk, wooden |
DM |
|
Crate, framed |
FD |
|
Crate, fruit |
FC |
|
Crate, metal |
MA |
|
Crate, milk |
MC |
|
Crate, multiple layer, cardboard |
DC |
|
Crate, multiple layer, plastic |
DA |
|
Crate, multiple layer, wooden |
DB |
|
Crate, shallow |
SC |
|
Crate, wooden |
8B |
|
Creel |
CE |
|
Cup |
CU |
|
Cylinder |
CY |
|
Demijohn, non-protected |
DJ |
|
Demijohn, protected |
DP |
|
Dispenser |
DN |
|
Drum |
DR |
|
Drum, aluminium |
1B |
|
Drum, aluminium, non-removable head |
QC |
|
Drum, aluminium, removable head |
QD |
|
Drum, fibre |
1G |
|
Drum, iron |
DI |
|
Drum, plastic |
IH |
|
Drum, plastic, non-removable head |
QF |
|
Drum, plastic, removable head |
QG |
|
Drum, plywood |
1D |
|
Drum, steel |
1A |
|
Drum, steel, non-removable head |
QA |
|
Drum, steel, removable head |
QB |
|
Drum, wooden |
1W |
|
Envelope |
EN |
|
Envelope, steel |
SV |
|
Filmpack |
FP |
|
Firkin |
FI |
|
Flask |
FL |
|
Flexibag |
FB |
|
Flexitank |
FE |
|
Foodtainer |
FT |
|
Footlocker |
FO |
|
Frame |
FR |
|
Girder |
GI |
|
Girders, in bundle/bunch/truss |
GZ |
|
Hamper |
HR |
|
Hanger |
HN |
|
Hogshead |
HG |
|
Ingot |
IN |
|
Ingots, in bundle/bunch/truss |
IZ |
|
Intermediate bulk container |
WA |
|
Intermediate bulk container, aluminium |
WD |
|
Intermediate bulk container, aluminium, liquid |
WL |
|
Intermediate bulk container, aluminium, pressurised > 10 kPa |
WH |
|
Intermediate bulk container, composite |
ZS |
|
Intermediate bulk container, composite, flexible plastic, liquids |
ZR |
|
Intermediate bulk container, composite, flexible plastic, pressurised |
ZP |
|
Intermediate bulk container, composite, flexible plastic, solids |
ZM |
|
Intermediate bulk container, composite, rigid plastic, liquids |
ZQ |
|
Intermediate bulk container, composite, rigid plastic, pressurised |
ZN |
|
Intermediate bulk container, composite, rigid plastic, solids |
PLN |
|
Intermediate bulk container, fibreboard |
ZT |
|
Intermediate bulk container, flexible |
ZU |
|
Intermediate bulk container, metal |
WF |
|
Intermediate bulk container, metal, liquid |
WM |
|
Intermediate bulk container, metal, other than steel |
ZV |
|
Intermediate bulk container, metal, pressure 10 kPa |
WJ |
|
Intermediate bulk container, natural wood |
ZW |
|
Intermediate bulk container, natural wood, with inner liner |
WU |
|
Intermediate bulk container, paper, multi-wall |
ZA |
|
Intermediate bulk container, paper, multi-wall, water resistant |
ZC |
|
Intermediate bulk container, plastic film |
WS |
|
Intermediate bulk container, plywood |
ZX |
|
Intermediate bulk container, plywood, with inner liner |
WY |
|
Intermediate bulk container, reconstituted wood |
ZY |
|
Intermediate bulk container, reconstituted wood, with inner liner |
WZ |
|
Intermediate bulk container, rigid plastic |
AA |
|
Intermediate bulk container, rigid plastic, freestanding, liquids |
ZK |
|
Intermediate bulk container, rigid plastic, freestanding, pressurised |
ZH |
|
Intermediate bulk container, rigid plastic, freestanding, solids |
ZF |
|
Intermediate bulk container, rigid plastic, with structural equipment, liquids |
ZJ |
|
Intermediate bulk container, rigid plastic, with structural equipment, pressurised |
ZG |
|
Intermediate bulk container, rigid plastic, with structural equipment, solids |
ZD |
|
Intermediate bulk container, steel |
WC |
|
Intermediate bulk container, steel, liquid |
WK |
|
Intermediate bulk container, steel, pressurised > 10 kPa |
WG |
|
Intermediate bulk container, textile without coat/liner |
WT |
|
Intermediate bulk container, textile, coated |
WV |
|
Intermediate bulk container, textile, coated and liner |
WX |
|
Intermediate bulk container, textile, with liner |
WW |
|
Intermediate bulk container, woven plastic, coated |
WP |
|
Intermediate bulk container, woven plastic, coated and liner |
WR |
|
Intermediate bulk container, woven plastic, with liner |
WQ |
|
Intermediate bulk container, woven plastic, without coat/liner |
WN |
|
Jar |
JR |
|
Jerrican, cylindrical |
JY |
|
Jerrican, plastic |
3H |
|
Jerrican, plastic, non-removable head |
QM |
|
Jerrican, plastic, removable head |
QN |
|
Jerrican, rectangular |
JC |
|
Jerrican, steel |
3A |
|
Jerrican, steel, non-removable head |
QK |
|
Jerrican, steel, removable head |
QL |
|
Jug |
JG |
|
Jutebag |
JT |
|
Keg |
KG |
|
Kit |
KI |
|
Liftvan |
LV |
|
Log |
LG |
|
Logs, in bundle/bunch/truss |
LZ |
|
Lot |
LT |
|
Lug |
LU |
|
Luggage |
LE |
|
Mat |
MT |
|
Matchbox |
MX |
|
Mutually defined |
ZZ |
|
Nest |
NS |
|
Net |
NT |
|
Net, tube, plastic |
NU |
|
Net, tube, textile |
NV |
|
Not available |
NA |
|
Octabin |
OT |
|
Package |
PK |
|
Package, cardboard, with bottle grip-holes |
IK |
|
Package, display, cardboard |
IB |
|
Package, display, metal |
ID |
|
Package, display, plastic |
IC |
|
Package, display, wooden |
IA |
|
Package, flow |
IF |
|
Package, paper wrapped |
IG |
|
Package, show |
IE |
|
Packet |
PA |
|
Pail |
PL |
|
Pallet |
PX |
|
Pallet, 100 cm × 110 cm |
AH |
|
Pallet, AS 4068-1993 |
OD |
|
Pallet, box Combined open-ended box and pallet |
PB |
|
Pallet, CHEP 100 cm × 120 cm |
OC |
|
Pallet, CHEP 40 cm × 60 cm |
OA |
|
Pallet, CHEP 80 cm × 120 cm |
OB |
|
Pallet, ISO T11 |
OE |
|
Pallet, modular, collars 80 cm × 100 cm |
PD |
|
Pallet, modular, collars 80 cm × 120 cm |
PE |
|
Pallet, modular, collars 80 cm × 60 cm |
AF |
|
Pallet, shrinkwrapped |
AG |
|
Pallet, triwall |
TW |
|
Pallet, wooden |
8A |
|
Pan |
P2 |
|
Parcel |
PC |
|
Pen |
PF |
|
Piece |
PP |
|
Pipe |
PI |
|
Pipes, in bundle/bunch/truss |
PV |
|
Pitcher |
PH |
|
Plank |
PN |
|
Planks, in bundle/bunch/truss |
PZ |
|
Plate |
PG |
|
Plates, in bundle/bunch/truss |
PY |
|
Platform, unspecified weight or dimension |
OF |
|
Pot |
PT |
|
Pouch |
PO |
|
Punnet |
PJ |
|
Rack |
RK |
|
Rack, clothing hanger |
RJ |
|
Receptacle, fibre |
AB |
|
Receptacle, glass |
GR |
|
Receptacle, metal |
MR |
|
Receptacle, paper |
AC |
|
Receptacle, plastic |
PR |
|
Receptacle, plastic wrapped |
MW |
|
Receptacle, wooden |
AD |
|
Rednet |
RT |
|
Reel |
RL |
|
Ring |
RG |
|
Rod |
RD |
|
Rods, in bundle/bunch/truss |
RZ |
|
Roll |
RO |
|
Sachet |
SH |
|
Sack |
SA |
|
Sack, multi-wall |
MS |
|
Sea-chest |
SE |
|
Set |
SX |
|
Sheet |
ST |
|
Sheet, plastic wrapping |
SP |
|
Sheetmetal |
SM |
|
Sheets, in bundle/bunch/truss |
SZ |
|
Shrinkwrapped |
SW |
|
Skid |
SI |
|
Slab |
SB |
|
Sleeve |
SY |
|
Slipsheet |
SL |
|
Spindle |
SD |
|
Spool |
SO |
|
Suitcase |
SU |
|
Tablet |
T1 |
|
Tank container, generic |
TG |
|
Tank, cylindrical |
TY |
|
Tank, rectangular |
TK |
|
Tea-chest |
TC |
|
Tierce |
TI |
|
Tin |
TN |
|
Tray |
PU |
|
Tray, containing horizontally stacked flat items |
GU |
|
Tray, one layer no cover, cardboard |
DV |
|
Tray, one layer no cover, plastic |
DS |
|
Tray, one layer no cover, polystyrene |
DU |
|
Tray, one layer no cover, wooden |
DT |
|
Tray, rigid, lidded stackable (CEN TS 14482:2002) |
IL |
|
Tray, two layers no cover, cardboard |
DY |
|
Tray, two layers no cover, plastic tray |
DW |
|
Tray, two layers no cover, wooden |
DX |
|
Trunk |
TR |
|
Truss |
TS |
|
Tub |
TB |
|
Tub, with lid |
TL |
|
Tube |
TU |
|
Tube, collapsible |
TD |
|
Tube, with nozzle |
TV |
|
Tubes, in bundle/bunch/truss |
TZ |
|
Tun |
TO |
|
Tyre |
TE |
|
Uncaged |
UC |
|
Unit |
UN |
|
Unpacked or unpackaged |
NE |
|
Unpacked or unpackaged, multiple units |
NG |
|
Unpacked or unpackaged, single unit |
NF |
|
Vacuum-packed |
VP |
|
Vanpack |
VK |
|
Vat |
VA |
|
Vehicle |
VN |
|
Vial |
VI |
|
Wickerbottle |
WB ◄ |
6. PREVIOUS DOCUMENT CODE
The codes applicable are as follows:
|
T2 |
= |
Transit declaration covering a common transit procedure for ►M38 Union goods ◄ . |
|
T2F |
= |
Transit declaration covering a common transit procedure for ►M38 Union goods ◄ coming from or going to a part of ►M38 the customs territory of the Union ◄ where ►M38 the Union rules ◄ for value-added tax do not apply. |
|
T2CIM |
= |
►M38 Union goods ◄ carried under cover of a CIM consignment note ►M38 ————— ◄ . |
|
T2TIR |
= |
►M38 Union goods ◄ carried under cover of a TIR carnet. |
|
T2ATA |
= |
►M38 Union goods ◄ carried under cover of an ATA carnet. |
|
T2L |
= |
Single Administrative Document proving ►M38 the customs status of Union goods ◄ . |
|
T2LF |
= |
Single Administrative Document proving ►M38 the customs status of Union goods ◄ in the exchange between parts of ►M38 the customs territory of the Union ◄ where ►M38 the Union rules ◄ for value-added tax apply and parts of this territory where these rules do not apply. |
|
T1 |
= |
Transit declaration covering a common transit procedure for ►M38 non-Union goods ◄ |
|
*…… |
… |
* any other previous document (an..5)
7. PRODUCED DOCUMENTS/CERTIFICATES CODE
(Numeric codes extracted from the 1997b UN Directories for Electronic Data Interchange for Administration, Commerce and Transport: List of codes for data element 1001, Document/message name, coded.)
|
Certificate of conformity |
2 |
|
Certificate of quality |
3 |
|
Movement certificate A.TR.1 |
18 |
|
Container list |
235 |
|
Packing list |
271 |
|
Proforma invoice |
325 |
|
Commercial invoice |
380 |
|
House waybill |
703 |
|
Master bill of lading |
704 |
|
Bill of lading |
705 |
|
House bill of lading |
714 |
|
SMGS consignment note (rail) |
722 |
|
▼M38 ————— |
|
|
Road consignment note |
730 |
|
Air waybill |
740 |
|
Master air waybill |
741 |
|
Despatch note (post parcels) |
750 |
|
Multimodal/combined transport document (generic) |
760 |
|
Cargo manifest |
785 |
|
Bordereau |
787 |
|
Despatch note model T |
820 |
|
Despatch note model T1 |
821 |
|
Despatch note model T2 |
822 |
|
▼M38 ————— |
|
|
Despatch note model T2L |
825 |
|
Goods declaration for exportation |
830 |
|
Phytosanitary certificate |
851 |
|
Sanitary certificate |
852 |
|
Veterinary certificate |
853 |
|
Certificate of origin |
861 |
|
Declaration of origin |
862 |
|
Preference certificate of origin |
864 |
|
►M38 Certificate of origin form A (GSP) ◄ |
865 |
|
Import licence |
911 |
|
Cargo declaration (arrival) |
933 |
|
Embargo permit |
941 |
|
TIF form |
951 |
|
TIR carnet |
952 |
|
►M38 Movement certificate EUR.1 ◄ |
954 |
|
ATA carnet |
955 |
|
Other |
zzz |
8. CODES FOR MODES OF TRANSPORT, POSTAL AND OTHER CONSIGNMENTS
A. 1-figure code (obligatory);
B. 2-figure code (second digit optional for the Contracting Parties).
|
A |
B |
Standing for |
|
1 |
10 |
Maritime transport |
|
|
12 |
Railway wagon on sea-going vessel |
|
|
16 |
Powered road vehicle on sea-going vessel |
|
|
17 |
Trailer or semi-trailer on sea-going vessel |
|
|
18 |
Inland waterway vessel on sea-going vessel |
|
2 |
20 |
Rail transport |
|
|
23 |
Road vehicle on rail-wagon |
|
3 |
30 |
Road transport |
|
4 |
40 |
Air transport |
|
5 |
50 |
Postal consignments |
|
7 |
70 |
Fixed transport installation |
|
8 |
80 |
Inland waterway transport |
|
9 |
90 |
Own propulsion |
9. ADDITIONAL INFORMATION/SPECIAL INDICATION CODE
The codes applicable are as follows:
|
DG0 |
= |
Export from one ►M38 common transit country ◄ subject to restriction or export from ►M38 the Union ◄ subject to restriction. |
|
DG1 |
= |
Export from one ►M38 common transit country ◄ subject to duties or export from ►M38 the Union ◄ subject to duties. |
|
DG2 |
= |
Export. |
Additional special indication codes can also be defined at national domain level.
10. GUARANTEE CODES
The applicable codes are:
|
Situation |
Code |
Additional information |
|
For guarantee waiver (Article 53 of Appendix I) |
0 |
— guarantee waiver certificate number |
|
For comprehensive guarantee |
1 |
— comprehensive guarantee certificate number — office of guarantee |
|
For individual guarantee by a guarantor |
2 |
— reference for the guarantee undertaking — office of guarantee |
|
For individual guarantee in cash |
3 |
|
|
For individual guarantee in the form of vouchers |
4 |
— individual guarantee voucher number |
|
For guarantee waiver (Article 11 of Appendix I) |
6 |
|
|
For guarantee waiver by agreement (Article 10(2)(a) of the Convention) |
A |
|
|
For guarantee waiver for the journey ►M38 between the customs office of departure and the customs office of transit ◄ (Article 10(2)(b) of the Convention) |
7 |
|
|
For individual guarantee of the type under point 3 of ►M38 Annex I to Appendix I ◄ . |
9 |
— reference for the guarantee undertaking — ►M38 customs office of guarantee ◄ |
Country codes
The codes adopted for box 51 are applicable.
11. CUSTOMS OFFICE REFERENCE NUMBER (COR)
|
Field |
Content |
Field type |
Example |
|
1 |
Identifier of the country to which the Customs Office belongs (see CNT) |
Alphabetic 2 |
IT |
|
2 |
National number of the Customs Office |
Alphanumeric 6 |
0830AB |
Field 1 as explained above.
Field 2 has to be freely filled with a 6 character alphanumeric code. The six characters allow national administrations, where necessary, to define a hierarchy of customs offices.
►M38 The customs offices of destination ◄ are listed on the competent office list (COL on the Europa site) for the common transit operations.
ANNEX A3
SPECIMEN OF TRANSIT ACCOMPANYING DOCUMENT
ANNEX A4
EXPLANATORY NOTES AND PARTICULARS (DATA) FOR THE TRANSIT ACCOMPANYING DOCUMENT
Explanatory notes for completing the transit accompanying document
The paper to be used for the transit accompanying document ►M38 can be green in colour ◄ .
The transit accompanying document shall be printed on the basis of the data derived from the transit declaration, where appropriate amended by the holder of the procedure and/or verified by the customs office of departure, and completed with:
1. ►M38 MRN (Master Reference Number) ◄
The information is given alphanumerically with 18 digits based on the following specimen:
|
Field |
Content |
Field type |
Examples |
|
1 |
Last two digits of year of formal acceptance of transit movement (YY) |
Numeric 2 |
97 |
|
2 |
Identifier of the country from which movement originates. (ISO alpha-2 country code) |
Alphabetic 2 |
IT |
|
3 |
Unique identifier for transit movement per year and country |
Alphanumeric 13 |
9876AB8890123 |
|
4 |
Check digit |
Alphanumeric 1 |
5 |
Fields 1 and 2 as explained above.
Field 3 has to be filled in with an identifier for the transit transaction. The way that field is used is under the responsibility of national administrations but each transit transaction handled during one year within the given country must have a unique number. National administrations that want to have the office reference number of ►M38 the customs authorities ◄ included in the MRN could use up to the first 6 characters to insert the national number of the office.
Field 4 has to be filled with a value that is a check digit for the whole MRN. This field allows detection of any error when capturing the whole MRN.
The MRN shall also be printed in bar code mode using the standard ‘code 128’, character set ‘B’
2. Box 3:
3. In the space to the right of box 8:
Name and address of the customs office to which the return copy of the transit accompanying document has to be returned ►M38 where the business continuity procedure for transit is used ◄ .
Any references to ‘principal’ are understood as referring to the ‘holder of the procedure’.
4. Box C:
5. Box D:
The transit accompanying document shall not be modified nor shall any addition or deletion be made thereto unless otherwise specified in this Convention.
6. Formalities en route
Between the time when the goods leave ►M38 the customs office of departure ◄ and the time they arrive at ►M38 the customs office of destination ◄ certain details may have to be added on the transit accompanying document accompanying the goods. The details relate to the transport operation and must be entered by the carrier responsible for the means of transport on which the goods are loaded as and when the corresponding activities are carried out. The particulars may be added legibly by hand, in which case the entries should be made in ink and in block letters.
Carriers are reminded that goods can be transhipped only under an authorisation of the competent authorities of the country in whose territory the transhipment is to be made.
Where those authorities consider that the common transit operation concerned may continue in the normal way they shall, once they have taken any steps that may be necessary, endorse the transit accompanying documents.
The customs authorities at the customs office of transit or the customs office of destination, as the case may be, are under an obligation to incorporate into the system the added data on the transit accompanying document. The data can also be incorporated by the authorised consignee.
The boxes and activities involved are:
ANNEX A5
SPECIMEN OF THE LIST OF ITEMS
ANNEX A6
EXPLANATORY NOTES AND PARTICULARS (DATA) FOR THE LIST OF ITEMS
When a movement consists of more than one item, sheet A of the list of items shall always be printed by the computer system and shall be attached to the transit accompanying document.
The boxes of the list of items are vertically expandable.
Particulars have to be printed as follows:
In the identification box (upper left corner):
list of items;
serial number of the current sheet and the total number of the sheets (including the transit accompanying document).
OoDep — name of ►M38 the customs office of departure ◄ .
Date — date of acceptance of the transit declaration.
►M38 MRN — Master Reference Number ◄ .
The particulars of the different boxes at item level has to be printed as follows:
item No — serial number of the current item;
regime — if the status of the goods for the whole declaration is uniform, the box is not used;
if mixed consignment the actual status, T1, T2 or T2F, is printed.
ANNEX B1
CODES TO BE USED WHEN COMPLETING TRANSIT DECLARATION FORMS
This Annex shall cease to apply as of the dates of deployment of the upgrading of the NCTS referred to in the Annex to Implementing Decision (EU) 2016/578.
A. Particulars to be entered in the different boxes
|
Box 19 |
: |
Container The applicable codes are: 0: goods not carried in containers; 1: goods carried in containers. |
|
Box 27 |
: |
Place of loading/unloading Codes to be adopted by the Contracting Parties. |
|
Box 33 |
: |
Commodity code First sub-division Give the commodity code made up of at least the six digits of the Harmonised Commodity Description and Coding System. ►M38 However, in the Union give the eight digits of the Combined Nomenclature where a Union provision so requires. ◄ Other sub-divisions To be completed using any other specific codes of the Contracting Parties (such codes should be entered starting immediately after the first sub-division). |
|
Box 51 |
: |
Intended transit offices Country Codes This country code is the ISO alpha-2 code (ISO 3166-1). The applicable codes are:
|
|
Box 53 |
: |
Office of destination (and country) Use the codes shown for box 51. |
B. Codes of linguistic references
See Annex B6, Title III
ANNEX B2
EXPLANATORY NOTE ON COMPLETING FORMS TO BE USED FOR ESTABLISHING THE CUSTOMS STATUS OF UNION GOODS
A. General description
1. Where ►M38 the customs status of Union goods ◄ has to be established for the purposes of the Convention, forms conforming to Copy No 4 of the specimen in the SAD Convention, Annex 1, Appendix I or Copy No 4/5 of the specimen in the SAD Convention, Annex 1, Appendix II must be used. Where necessary one or more continuation sheets complying with Copy No 4 or Copy No 4/5 of the specimens in the SAD Convention, Annex I, Appendices 3 and 4 respectively, must be used.
2. The person concerned should complete only the boxes at the top of the form under the heading ‘Important note’.
3. Forms must be completed using a typewriter or mechanographical or similar process. They may also be completed legibly by hand, in ink and in block letters.
4. No erasures or alterations may be made. Any alterations must be made by crossing out the incorrect particulars and, where appropriate, adding those required. Any alterations made in this way must be initialled by the person making them and expressly endorsed by the competent authorities. Where necessary, the latter may require ►M38 a new form to be submitted ◄ .
5. Any unused spaces in the boxes to be completed by the person concerned must be struck through so that no subsequent entries can be made.
B. Particulars to be entered in the different boxes
|
Box 1 |
: |
Declaration Enter ‘T2L’ or ‘T2LF’ in the third subdivision. Where continuation sheets are used, enter ‘T2Lbis’ or ‘T2LFbis’, as appropriate, in the third subdivision of box 1 of the forms used for the purpose. |
|
Box 2 |
: |
Consignor/Exporter This box is optional for the Contracting Parties. Enter the full name and address of the consignor/exporter. The countries in question may add to the explanatory note the requirement to include a reference to the identification number allocated by the competent authorities for tax, statistical or other purposes. Where consignments are grouped, the said countries may provide that the following entry be made in this box and that the list of consignors be attached to the declaration:
—
Various — 99211
|
|
Box 3 |
: |
Forms Give the number of the form and the total number of forms used. For example if the T2L document is made out on a single form, enter 1/1; if the T2L document has a T2Lbis continuation sheet, enter 1/2 on the T2L document and 2/2 on the continuation sheet; if the T2L document has two T2Lbis continuation sheets, enter 1/3 on the T2L document, 2/3 on the first T2Lbis continuation sheet and 3/3 on the second T2Lbis continuation sheet. |
|
Box 4 |
: |
Loading lists Enter the number of loading lists attached. |
|
Box 5 |
: |
Items Enter the total number of items listed in the T2L document. |
|
Box 14 |
: |
Declarant/Representative Enter the full name and address of the declarant/representative in accordance with the provisions in force. If the person concerned is the same as the consignor entered in box 2 enter one of the following:
—
Consignor — 99213
The countries in question may add to the explanatory note the requirement to include the identification number allocated by the competent authorities for tax, statistical or other purposes. |
|
Box 31 |
: |
Packages and description of goods, marks and numbers, container No(s), number and kind Enter the marks, numbers, number and kind of packages or, in the case of unpackaged goods, enter the number of such goods covered by the document or the following:
—
Bulk — 99212
The normal trade description must be entered in all cases. This description must include all the details needed to allow identification of the goods. Where box 33 (Commodity Code) has to be completed, the description must be expressed in sufficiently precise terms to allow classification of the goods. This box must also show the particulars required under any specific rules (e.g. on excise duties). If containers are used, the identifying marks of the container should also be entered in this box. |
|
Box 32 |
: |
Item number Give the number of the item shown in the list in Box 5 of the accompanying T2L document, continuation sheets or loading lists. Where a T2L document covers only one item, the Contracting Parties need not require this box to be completed as the figure ‘1’ should already have been entered in box 5. |
|
Box 33 |
: |
Commodity code In T2L documents made out in ►M38 a common transit country ◄ , this box has to be completed only where the transit declaration or previous document includes a commodity code. |
|
Box 35 |
: |
Gross mass Enter the gross mass, in kilograms, of the goods described in the corresponding box 31. The gross mass is the aggregate mass of the goods including all packing but excluding containers and other transport equipment. Where a T2L document covers several types of goods, it is sufficient to enter the total gross mass in the first box 35 and leave the remaining boxes 35 blank. |
|
Box 38 |
: |
Net mass ►M38 In common transit countries ◄ this box has to be completed only where the transit declaration or previous document includes an entry for net mass. Enter the net mass, in kilograms, of the goods described in the corresponding box 31. The net mass is the mass of the goods themselves excluding all packaging. |
|
Box 40 |
: |
Summary declaration/previous document Enter the type, number, date and issuing office of the declaration or previous document used as a basis for drawing up the T2L document. |
|
Box 44 |
: |
Additional information, documents produced, certificates and authorisations ►M38 In common transit countries ◄ this box has to be completed only where an entry has been made in the equivalent box in the transit declaration or preceding document. Any such entries must be repeated on the T2L document. |
|
Box 54 |
: |
Place and date, signature and name of the declarant or his representative Subject to any specific provisions on the use of computerised systems, the signature of the person concerned, followed by his name and forename, must appear on the T2L document. When the person concerned is a legal person, the signatory should add after his signature and name the capacity in which he is signing. |
C. Codes of linguistic references
See Annex B6, Title III
ANNEX B3
CODES TO BE USED WHEN COMPLETING FORMS TO BE USED WHEN ESTABLISHING THE CUSTOMS STATUS OF UNION GOODS
A. Particulars to be entered in the different boxes
|
Box 33 |
: |
Commodity code First sub-division Give the commodity code made up of at least the six digits of the Harmonised Commodity Description and Coding System. ►M38 However, in the Union give the eight digits of the Combined Nomenclature where a Union provision so requires. ◄ Other sub-divisions To be completed using any other specific codes of the Contracting Parties (such codes should be entered starting immediately after the first sub-division). |
B. Codes of linguistic references
See Annex B6, Title III
ANNEX B4
LOADING LIST
|
|
|
|
|
|
|
|
|
No |
Marks, numbers, number and kind of packages; description of goods |
Country of dispatch/export |
Gross mass |
Reserved for official use |
|
|
|
|
|
|
(signature)
ANNEX B5
EXPLANATORY NOTE ON THE LOADING LIST
TITLE I
GENERAL
1. Definition
The loading list referred to in Article 7 of Appendix III means a document having the characteristics described in this Annex.
2. Loading list form
2.1. Only the front of the form may be used as a loading list.
2.2. The features of a loading list are:
the heading ‘Loading List’;
a 70 by 55 millimetre box divided into an upper part of 70 by 15 millimetres and a lower part of 70 by 40 millimetres;
columns with the following headings in the following order:
Users may adjust the width of the columns to their needs. However, the column headed ‘reserved for the administration’ must always be at least 30 millimetres wide. Users may also decide for themselves how to use the spaces other than those referred to in points (a), (b) and (c).
2.3. A horizontal line must be drawn immediately under the last entry and any spaces not used must be scored through to prevent later additions.
TITLE II
PARTICULARS TO BE ENTERED IN THE DIFFERENT HEADINGS
1. Box
1.1. Upper part
Where a loading list accompanies a transit declaration, ►M38 the holder of the procedure shall enter ◄ ‘T1’, ‘T2’ or ‘T2F’ in the upper part of the box.
Where a loading list accompanies a T2L document, the person concerned must enter ‘T2L’ or ‘T2LF’ in the upper part of the box.
1.2. ►M38 Bottom part ◄
The particulars listed in paragraph 4 of Title III below must be entered in this part of the box.
2. Columns
2.1. Serial number
Every item shown on the loading list must be preceded by a serial number.
2.2. Marks, numbers, number and kind of packages, description of goods
Where a loading list accompanies a transit declaration, the particulars must be entered in accordance with Annexes B1 and B6 to this Appendix. The list must include the information entered in boxes 31 (Packages and description de goods), 44 (Additional information, documents produced, certificates and authorisations) and, where appropriate, 33 (Commodity code) and 38 (Net mass) of the transit declaration.
Where a loading list accompanies a T2L document, the particulars must be entered in accordance with Annexes B2 and B3 to this Appendix.
2.3. Country of dispatch/export
Enter the name of the country from which the goods are being consigned or exported. Do not use this column where a loading list accompanies a T2L document.
2.4. Gross mass (kg)
Enter the details entered in box 35 of the SAD (see Annexes B2 and B6 to this Appendix).
TITLE III
USE OF LOADING LISTS
1. A transit declaration may not have both a loading list and one or more continuation sheets attached to it.
2. Where a loading list is used, boxes 15 (Country of dispatch/export), 32 (Item number), 33 (Commodity code), 35 (Gross mass (kg)), 38 (net mass (kg)) and, where appropriate, 44 (Additional information, documents produced, certificates and authorisations) of the transit declaration form must be struck through and box 31 (Packages and description of goods) may not be used to enter the marks, numbers, number and kind of packages or description of goods. A reference to the serial number and the symbol of the different loading lists shall be entered in box 31 (Packages and description of goods) of the transit declaration form used.
3. The loading list must be produced in the same number of copies as ►M38 the copies of a transit declaration to which it relates ◄ .
4. When a transit declaration is registered the loading list must be given the same registration number as the forms of the transit declaration to which it relates. This number must be entered by using a stamp which includes the name of the customs office of departure, or by hand. If entered by hand, it shall be endorsed by the official stamp of the customs office of departure.
It is not obligatory for an official of the customs office of departure to sign the forms.
5. Where several loading lists are attached to one form used for the purpose of a T1 or T2 procedure, the lists must bear a serial number allocated by the ►M38 holder of the procedure ◄ , and the number of loading lists attached must be entered in box 4 (Loading lists) of the said form.
6. The provisions of paragraphs 1 to 5 apply, as appropriate, where a loading list is attached to a T2L document.
ANNEX B6
EXPLANATORY NOTE ON COMPLETING TRANSIT DECLARATION FORMS
TITLE I
GENERAL
General description
Where Article 22 of Appendix I is applicable, the form referred to in the SAD Convention Annex I, Appendix 1 is to be used for placing goods under the transit procedure in conformance with the SAD Convention, Annex II, Appendix 3, Title 1.
Where the rules (in particular those of Article 12(1) of this Convention and Article 37(4) to Appendix I) require additional copies of the transit declaration to be provided, the ►M38 holder of the procedure ◄ may use continuation sheets or photocopies, as necessary.
These must then be signed by the ►M38 holder of the procedure ◄ and presented to the competent authorities, who must endorse them in the same way as they endorse the Single Administrative Document. Save where the rules provide otherwise, these documents must be marked ‘copy’ and the competent authorities must accept them on the same terms as the originals, provided the said authorities consider the documents genuine and legible.
TITLE II
PARTICULARS TO BE ENTERED IN THE DIFFERENT BOXES
I. Formalities in the country of departure
|
Box 1 |
: |
Declaration The following must be entered in the third subdivision:
(1)
where goods are required to move under the T2 procedure: T2 or T2F;
(2)
where goods are required to move under the T1 procedure: T1;
(3)
for the consignments referred to in ►M38 Article 28 ◄ of Appendix I: T. In this case the space following the letter T must be struck through.
|
|
Box 2 |
: |
Consignor/Exporter This box is optional for the Contracting Parties. Enter the full name and address of the consignor/exporter concerned. The Contracting Parties may add to the explanatory note the requirement to include a reference to the identification number allocated by the competent authorities for tax, statistical or other purposes. Where consignments are grouped, the Contracting Parties may provide that the following entry be made in this box and that the list of consignors be attached to the declaration:
—
Various — 99211
|
|
Box 3 |
: |
Forms Enter the serial number of the set and the total number of sets of forms and continuation sheets used. For example, if there is one form and two continuation sheets, enter 1/3 on the form, 2/3 on the first continuation sheet and 3/3 on the second continuation sheet. When the declaration covers only one item (i.e. when only one ‘goods description’ box has to be completed) do not enter anything in box 3; enter the figure ‘1’ in box 5 instead. When two sets of 4 copies are used instead of one set of 8 copies, the two sets are to be treated as one. |
|
Box 4 |
: |
Number of loading lists Enter in figures the number of loading lists attached, if any, or the number of descriptive commercial lists, if any, authorised by the competent authorities. |
|
Box 5 |
: |
Items Enter the total number of items listed in the transit declaration. |
|
Box 6 |
: |
Total packages This box is optional for the Contracting Parties. Enter the total number of packages making up the consignment in question. |
|
Box 8 |
: |
Consignee Enter the full name and address of the person(s) or company(ies) to whom the goods are to be delivered. Where consignments are grouped, the Contracting Parties may provide that one of the entries referred to under box 2 be made in this box and that the list of consignees be attached to the transit declaration. The Contracting Parties may allow this box not to be completed if the consignee is established outside the territory of the Contracting Parties. The identification number need not be shown at this stage. |
|
Box 15 |
: |
Country of dispatch/export Box 15a Enter the name of the country from which the goods are to be dispatched/exported. |
|
Box 17 |
: |
Country of destination Box 17a Enter the name of the country. |
|
Box 18 |
: |
Identity and nationality of means of transport at departure Enter the means of identification, e.g. the registration number(s) or name, of the means of transport (lorry, ship, railway wagon, aircraft) on which the goods are directly loaded on presentation at ►M38 the customs office of departure ◄ , followed by the nationality of the means of transport (or that of the means of transport providing propulsion for the whole if it is made up of several means of transport), using the codes laid down for the purpose. For example, where a tractor and a trailer with different vehicle registration numbers are used, enter the registration numbers of both tractor and trailer, and the nationality of the tractor. However where goods are carried in containers that are to be transported by road vehicles, the competent authorities may authorise the ►M38 holder of the procedure ◄ to leave this box blank where the logistical pattern at the point of departure may prevent the identity and nationality of the means of transport from being provided at the time of establishment of the transit declaration, and where they can ensure that the proper information concerning the means of transport shall be subsequently entered in box 55. Where goods are moved by fixed transport installations, do not enter anything for registration number or nationality in this box. Where goods are carried by rail, do not enter anything for nationality. In other cases, declaration of the nationality is optional for the Contracting Parties. |
|
Box 19 |
: |
Container (Ctr) This box is optional for the Contracting Parties. Use the codes provided for the purpose to enter particulars of the presumed situation at the border of the Contracting Party in whose territory ►M38 the customs office of departure ◄ is located, as known at the time the goods were placed under the common transit procedure. |
|
Box 21 |
: |
Identity and nationality of the active means of transport crossing the border The requirement to enter the means of identification in this box is optional for the Contracting Parties. The requirement to enter the nationality is obligatory. However, where goods are carried by rail or moved by fixed installation, do not enter anything for registration number or nationality. Using the appropriate code, enter the type (lorry, ship, railway wagon, aircraft, etc.) and the means of identification (e.g. registration number or name) of the active means of transport (i.e. the means of transport providing propulsion) which it is presumed will be used at the frontier crossing point on exit from the Contracting Party where ►M38 the customs office of departure ◄ is located, followed by the code for the nationality of the means of transport, as known at the time the goods were placed under the common transit procedure. Where combined transport or several means of transport are used, the active means of transport is the unit which provides propulsion for the whole combination. For example, when a lorry is on a sea-going vessel, the active means of transport is the ship and where a combination of a tractor and a trailer is used, the active means of transport is the tractor. |
|
Box 25 |
: |
Mode of transport at the border This box is optional for the Contracting Parties. Use the codes provided for the purpose to enter the mode of transport which it is presumed will provide the active means of transport on which the goods will leave the territory of the Contracting Party in which ►M38 the customs office of departure ◄ is located. |
|
Box 27 |
: |
Place of loading This box is optional for the Contracting Parties. Where a code is provided, use it to enter the place where the goods are to be loaded onto the active means of transport on which they are to cross the border of the Contracting Party in whose territory ►M38 the customs office of departure ◄ is located, as known at the time the goods are placed under the common transit procedure. |
|
Box 31 |
: |
Packages and description of goods, marks and numbers, container No(s), number and kind Enter the marks, numbers, number and kind of packages or, in the case of unpackaged goods, enter the number of such goods covered by the declaration, or one of the following:
—
Bulk — 99212
The normal trade description must be entered in all cases. This description must include all the details needed to allow identification of the goods. Where box 33 (Commodity Code) has to be completed, the description must be expressed in sufficiently precise terms to allow classification of the goods. This box must also show the particulars required under any specific rules (e.g. on excise duties). If containers are used, the identifying marks of the container should also be entered in this box. |
|
Box 32 |
: |
Item number Give the number of the item shown in the list of items declared in box 5. Where a declaration covers only one item, the Contracting Parties need not require this box to be completed as the figure ‘1’ should already have been entered in box 5. |
|
Box 33 |
: |
Commodity code This box must be completed where:
—
the same person makes a transit declaration at the same time as, or following, a customs declaration which includes a commodity code, or
—
the Convention specifies that its use is obligatory.
Enter the code for the goods. In T2 and T2F transit declarations made in ►M38 a common transit country ◄ this box need not be completed unless the preceding transit declaration includes a commodity code. If it does, give the code entered in the corresponding declaration. In all other cases use of this box is optional. |
|
Box 35 |
: |
Gross mass Enter the gross mass, in kilograms, of the goods described in the corresponding box 31. The gross mass is the aggregate mass of the goods including all packing but excluding containers and other transport equipment. Where a declaration covers several types of goods, it is sufficient to enter the total gross mass in the first box 35 and leave the remaining boxes 35 blank. |
|
Box 38 |
: |
Net mass This box is optional for the Contracting Parties. Enter the net mass, in kilograms, of the goods described in the corresponding box 31. The net mass is the mass of the goods themselves excluding all packaging. |
|
Box 40 |
: |
Summary declaration/previous document Enter the reference for the preceding ►M38 customs procedure ◄ or for any corresponding customs documents. Where more than one reference has to be given, the Contracting Parties may provide that the following be entered in this box and that a list of the references concerned accompany the transit declaration:
—
Various — 99211
|
|
Box 44 |
: |
Additional information, documents produced, certificates and authorisations Enter the details required under any specific rules applicable in the country of dispatch/export together with the reference numbers of the documents produced in support of the declaration, or any additional reference deemed necessary in relation with the declaration or the goods covered by the declaration (e.g. the export licence or permit number, the data required under veterinary and phytosanitary regulations, the bill of lading number). Do not complete the sub-division ‘Additional Information code (AI)’. |
|
Box 50 |
: |
Principal and authorised representative, place, date and signature Enter the full name (person or company) and address of the ►M38 holder of the procedure ◄ and the identification number, if any, allocated by the competent authorities. If appropriate, enter the full name (person or company) of the authorised representative signing on behalf of the ►M38 holder of the procedure ◄ . Subject to any specific provisions on the use of ►M38 electronic transit system ◄ , the original of the handwritten signature of the person concerned must appear on the copy which is to be kept at ►M38 the customs office of departure ◄ . Where the person concerned is a legal person, the signatory should add after his signature his full name and the capacity in which he is signing. |
|
Box 51 |
: |
Intended offices of transit (and countries) Enter the intended office of entry into each Contracting Party whose territory is to be transited in the course of carriage or, where the operation involves transiting territory other than that of the Contracting Parties, ►M38 the customs office of exit ◄ by which the means of transport will leave the territory of the Contracting Parties. ►M38 The customs offices of transit ◄ are shown in the list of offices competent for common transit operations. After the name of the office, enter the code for the country concerned. |
|
Box 52 |
: |
Guarantee Use the codes laid down for this purpose to enter the type of guarantee or guarantee waiver used for the operation followed, as appropriate, by the number of the comprehensive guarantee certificate, the guarantee waiver certificate, or the individual guarantee voucher, and ►M38 the customs office of guarantee ◄ . Where a comprehensive guarantee, a guarantee waiver or individual guarantee furnished by a guarantor is not valid for all the Contracting Parties, add ‘not valid for’ followed by the codes for the Contracting Party or Parties concerned. |
|
Box 53 |
: |
Office of destination (and country) Enter the name of the office where the goods are to be presented in order to complete the transit operation. ►M38 The custom offices of destination ◄ are listed on the competent offices list (COL on EUROPA) for common transit operations. After the name of the office, enter the code for the country concerned. |
II. Formalities en route
Between the time when the goods leave ►M38 the customs office of departure ◄ and the time they arrive at ►M38 the customs office of destination ◄ certain details may have to be added on Copies No 4 and 5 of the transit declaration accompanying the goods. The details relate to the transport operation and must be entered by the carrier responsible for the means of transport on which the goods are loaded as and when the corresponding activities are carried out. The particulars may be added legibly by hand, in which case the entries should be made in ink and in block letters.
The boxes and activities involved are:
|
Box 55 |
: |
Transhipment The carrier must complete the first three lines of this box when goods are transhipped from one means of transport to another or from one container to another in the course of the operation in question. Carriers are reminded that goods can be transhipped only under an authorisation of the competent authorities of the country in whose territory the transhipment is to be made. Where those authorities consider that the common transit operation concerned may continue in the normal way they shall, once they have taken any steps that may be necessary, endorse Copies No 4 and 5 of the transit declaration.
—
Other incidents: use box 56.
|
|
Box 56 |
: |
Other incidents during carriage Box to be completed in accordance with current obligations regarding transit. In addition, where goods have been loaded on a semi-trailer and the tractor is changed during the journey (without the goods being handled or transhipped), enter in this box the registration number and nationality of the new tractor. Here, endorsement by the competent authorities is not necessary. |
TITLE III
TABLE OF LINGUISTIC REFERENCES AND OF THEIR CODES
|
Linguistic references |
Codes |
|
|
— BG |
Ограничена валидност |
Limited validity — 99200 |
|
— CS |
Omezená platnost |
|
|
— DA |
Begrænset gyldighed |
|
|
— DE |
Beschränkte Geltung |
|
|
— EE |
Piiratud kehtivus |
|
|
— EL |
Περιορισμένη ισχύς |
|
|
— ES |
Validez limitada |
|
|
— FR |
Validité limitée |
|
|
— HR |
Valjanost ograničena |
|
|
— IT |
Validità limitata |
|
|
— LV |
Ierobežots derīgums |
|
|
— LT |
Galiojimas apribotas |
|
|
— HU |
Korlátozott érvényű |
|
|
— MK (1) |
Ограничено важење |
|
|
— MT |
Validità limitata |
|
|
— NL |
Beperkte geldigheid |
|
|
— PL |
Ograniczona ważność |
|
|
— PT |
Validade limitada |
|
|
— RO |
Validitate limitată |
|
|
— RS |
Ограничена важност |
|
|
— SL |
Omejena veljavnost |
|
|
— SK |
Obmedzená platnosť |
|
|
— FI |
Voimassa rajoitetusti |
|
|
— SV |
Begränsad giltighet |
|
|
— EN |
Limited validity |
|
|
▼M34 ————— |
||
|
— IS |
Takmarkað gildissvið |
|
|
— NO |
Begrenset gyldighet |
|
|
— TR |
Sınırlı Geçerli |
|
|
— BG |
Освободено |
Waiver — 99201 |
|
— CS |
Osvobození |
|
|
— DA |
Fritaget |
|
|
— DE |
Befreiung |
|
|
— EE |
Loobumine |
|
|
— EL |
Απαλλαγή |
|
|
— ES |
Dispensa |
|
|
— FR |
Dispense |
|
|
— HR |
Oslobođeno |
|
|
— IT |
Dispensa |
|
|
— LV |
Derīgs bez zīmoga |
|
|
— LT |
Leista neplombuoti |
|
|
— HU |
Mentesség |
|
|
— MK (1) |
Изземање |
|
|
— MT |
Tneħħija |
|
|
— NL |
Vrijstelling |
|
|
— PL |
Zwolnienie |
|
|
— PT |
Dispensa |
|
|
— RO |
Dispensă |
|
|
— RS |
Ослобођење |
|
|
— SL |
Opustitev |
|
|
— SK |
Oslobodenie |
|
|
— FI |
Vapautettu |
|
|
— SV |
Befrielse |
|
|
— EN |
Waiver |
|
|
▼M34 ————— |
||
|
— IS |
Undanþegið |
|
|
— NO |
Fritak |
|
|
— TR |
Vazgeçme |
|
|
— BG |
Алтернативно доказателство |
Alternative proof — 99202 |
|
— CS |
Alternativní důkaz |
|
|
— DA |
Alternativt bevis |
|
|
— DE |
Alternativnachweis |
|
|
— EE |
Alternatiivsed tõendid |
|
|
— EL |
Εναλλακτική απόδειξη |
|
|
— ES |
Prueba alternativa |
|
|
— FR |
Preuve alternative |
|
|
— HR |
Alternativni dokaz |
|
|
— IT |
Prova alternativa |
|
|
— LV |
Alternatīvs pierādījums |
|
|
— LT |
Alternatyvusis įrodymas |
|
|
— HU |
Alternatív igazolás |
|
|
— MK (1) |
Алтернативен доказ |
|
|
— MT |
Prova alternattiva |
|
|
— NL |
Alternatief bewijs |
|
|
— PL |
Alternatywny dowód |
|
|
— PT |
Prova alternativa |
|
|
— RO |
Probă alternativă |
|
|
— RS |
Алтернативни доказ |
|
|
— SL |
Alternativno dokazilo |
|
|
— SK |
Alternatívny dôkaz |
|
|
— FI |
Vaihtoehtoinen todiste |
|
|
— SV |
Alternativt bevis |
|
|
— EN |
Alternative proof |
|
|
▼M34 ————— |
||
|
— IS |
Önnur sönnun |
|
|
— NO |
Alternativt bevis |
|
|
— TR |
Alternatif Kanıt |
|
|
— BG |
Различия: митническо учреждение, където стоките са представени (наименование и страна) |
Differences: office where goods were presented …… (name and country) — 99203 |
|
— CS |
Nesrovnalosti: úřad, kterému bylo zboží předloženo …..(název a země) |
|
|
— DA |
Forskelle: det sted, hvor varerne blev frembudt …… (navn og land) |
|
|
— DE |
Unstimmigkeiten: Stelle, bei der die Gestellung erfolgte …… (Name und Land) |
|
|
— EE |
Erinevused: asutus, kuhu kaup esitati………….(nimi ja riik) |
|
|
— EL |
Διαφορές: εμπορεύματα προσκομισθέντα στο τελωνείο …… (Όνομα και χώρα) |
|
|
— ES |
Diferencias: mercancías presentadas en la oficina …… (nombre y país) |
|
|
— FR |
Différences: marchandises présentées au bureau …… (nom et pays) |
|
|
— HR |
Razlike: Carinarnica kojoj je roba podnesena …… (naziv i zemlja) |
|
|
— IT |
Differenze: ufficio al quale sono state presentate le merci …… (nome e paese) |
|
|
— LV |
Atšķirības: muitas iestāde, kurā preces tika uzrādītas (nosaukums un valsts) |
|
|
— LT |
Skirtumai: įstaiga, kuriai pateiktos prekės (pavadinimas ir valstybė) |
|
|
— HU |
Eltérések: hivatal, ahol az áruk bemutatása megtörtént …… (név és ország) |
|
|
— MK (1) |
Разлики: Испостава каде стоките се ставени на увид … (назив и земја) |
|
|
— MT |
Differenzi: uffiċċju fejn l-oġġetti kienu ppreżentati (isem u pajjiż) |
|
|
— NL |
Verschillen: kantoor waar de goederen zijn aangebracht …… (naam en land) |
|
|
— PL |
Niezgodności: urząd w którym przedstawiono towar …… (nazwa i kraj) |
|
|
— PT |
Diferenças: mercadorias apresentadas na estãncia …… (nome e país) |
|
|
— RO |
Diferențe: mărfuri prezentate la biroul vamal …..(nume și țara)ò |
|
|
— RS |
Разлике: царински орган којем је предата роба …(назив и земља) |
|
|
— SL |
Razlike: urad, pri katerem je bilo blago predloženo … (naziv in država) |
|
|
— SK |
Nezrovnalosti: úrad, ktorému bol tovar dodaný …… (názov a krajina). |
|
|
— FI |
Muutos: toimipaikka, jossa tavarat esitetty …… (nimi ja maa) |
|
|
— SV |
Avvikelse: tullkontor där varorna anmäldes …… (namn och land) |
|
|
— EN |
Differences: office where goods were presented …… (name and country) |
|
|
▼M34 ————— |
||
|
— IS |
Breying: tollstjóraskrifstofa þar sem vörum var framvísað …… (nafn og land) |
|
|
— NO |
Forskjell: det tollsted hvor varene ble fremlagt …… (navn og land) |
|
|
— TR |
Değișiklikler: Eșyanın sunulduğu idare … (adı ve ülkesi) |
|
|
— BG |
Излизането от ............... подлежи на ограничения или такси съгласно Регламент/Директива/Решение № …, |
Exit from …………… subject to restrictions or charges under Regulation/Directive/Decision No ... — 99204 |
|
— CS |
Výstup ze …………… podléhá omezením nebo dávkám podle nařízení/směrnice/rozhodnutí č … |
|
|
— DA |
Udpassage fra …………….. undergivet restriktioner eller afgifter i henhold til forordning/direktiv/afgørelse nr. ... |
|
|
— DE |
Ausgang aus ……………..- gemäß Verordnung/Richtlinie/Beschluss Nr. ... Beschränkungen oder Abgaben unterworfen. |
|
|
— EE |
Väljumine .................. on aluseks piirangutele ja/või maksudele vastavalt määrusele/direktiivile/otsusele nr.. |
|
|
— EL |
Η έξοδος από ……………. υποβάλλεται σε περιοριορισμούς ή σε επιβαρύνσεις από τον Κανονισμό/την Οδηγία/την Απόφαση αριθ. … |
|
|
— ES |
Salida de…………….. sometida a restricciones o imposiciones en virtud del (de la) Reglamento/Directiva/Decisión no ... |
|
|
— FR |
Sortie de ……………….. soumise à des restrictions ou à des impositions par le règlement ou la directive/décision no ... |
|
|
— HR |
Izlaz iz…….. podliježe ograničenjima ili pristojbama temeljem Uredbe/Direktive/Odluke br… |
|
|
— IT |
Uscita dalla ………………… soggetta a restrizioni o ad imposizioni a norma del(la) regolamento/direttiva/decisione n. ... |
|
|
— LV |
Izvešana no ……………., piemērojot ierobežojumus vai maksājumus saskaņā ar Regulu/Direktīvu/Lēmumu No…, |
|
|
— LT |
Išvežimui iš ................. taikomi apribojimai arba mokesčiai, nustatytiReglamentu/Direktyva/Sprendimu Nr.…, |
|
|
— HU |
A kilépés………. területéről a ...rendelet/irányelv/határozat szerinti korlátozás vagy teher megfizetésének kötelezettsége alá esik |
|
|
— MK (1) |
Излез од … предмет на ограничувања или давачки согласно Уредба/Директива/Решение № … |
|
|
— MT |
Ħruġ mill-................... suġġett għall-restrizzjonijiet jew ħlasijiet taħt Regola/Direttiva/Deċiżjoni Nru… |
|
|
— NL |
Bij uitgang uit de ………………zijn de beperkingen of heffingen van Verordening/Richtlijn/Besluit nr. ... van toepassing. |
|
|
— PL |
Wyprowadzenie z…………………. podlega ograniczeniom lub opłatom zgodnie z rozporządzeniem/dyrektywą/decyzją nr … |
|
|
— PT |
Saída da ……………….. sujeita a restrições ou a imposições pelo(a) Regulamento/Directiva/Decisão n.o ... |
|
|
— RO |
Ieșire din....... supusă restricțiilor sau impunerilor în temeiul Regulamentului/Directivei/Deciziei nr … |
|
|
— RS |
Излаз из …подлеже ограничењима или дажбинама на основу Уредбе/Директиве/Одлуке бр … |
|
|
— SL |
Iznos iz ……………….. zavezan omejitvam ali obveznim dajatvam na podlagi uredbe/direktive/odločbe št … |
|
|
— SK |
Výstup z........................... podlieha obmedzeniam alebo platbám podľa nariadenia/smernice/rozhodnutia č …. |
|
|
— FI |
…………….. vientiin sovelletaan asetuksen/direktiivin ./päätöksen N:o ... mukaisia rajoituksia tai maksuja |
|
|
— SV |
Utförsel från ………………… underkastad restriktioner eller avgifter i enlighet med förordning/direktiv/beslut nr ... |
|
|
— EN |
Exit from ………………… subject to restrictions or charges under Regulation/Directive/Decision No ... |
|
|
▼M34 ————— |
||
|
— IS |
Útflutningur frá …………………háð takmörkunum eða gjöldum samkvæmt reglugerð/fyrirmælum/ákvörðun nr. ……. |
|
|
— NO |
Utførsel fra …………. underlagt restriksjoner eller avgifter i henhold til forordning/direktiv/vedtak nr. …. |
|
|
— TR |
Eșyanın … ’dan çıkıșı … No.lu Tüzük/Direktif/Karar kapsamında kısıtlamalara veya mali yükümlülüklere tabidir |
|
|
▼M38 ————— |
||
|
— BG |
Одобрен изпращач |
Authorised consignor — 99206 |
|
— CS |
Schválený odesílatel |
|
|
— DA |
Godkendt afsender |
|
|
— DE |
Zugelassener Versender |
|
|
— EE |
Volitatud kaubasaatja |
|
|
— EL |
Εγκεκριμένος αποστολέας |
|
|
— ES |
Expedidor autorizado |
|
|
— FR |
Expéditeur agréé |
|
|
— HR |
Ovlašteni pošiljatelj |
|
|
— IT |
Speditore autorizzato |
|
|
— LV |
Atzītais nosūtītājs |
|
|
— LT |
Įgaliotas siuntėjas |
|
|
— HU |
Engedélyezett feladó |
|
|
— MK (1) |
Овластен испраќач |
|
|
— MT |
Awtorizzat li jibgħat |
|
|
— NL |
Toegelaten afzender |
|
|
— PL |
Upoważniony nadawca |
|
|
— PT |
Expedidor autorizado |
|
|
— RO |
Expeditor agreat |
|
|
— RS |
Овлашћени пошиљалац |
|
|
— SL |
Pooblaščeni pošiljatelj |
|
|
— SK |
Schválený odosielateľ |
|
|
— FI |
Valtuutettu lähettäjä |
|
|
— SV |
Godkänd avsändare |
|
|
— EN |
Authorised consignor |
|
|
▼M34 ————— |
||
|
— IS |
Viðurkenndur sendandi |
|
|
— NO |
Autorisert avsender |
|
|
— TR |
İzinli Gönderici |
|
|
— BG |
Освободен от подпис |
Signature waived — 99207 |
|
— CS |
Podpis se nevyžaduje |
|
|
— DA |
Fritaget for underskrift |
|
|
— DE |
Freistellung von der Unterschriftsleistung |
|
|
— EE |
Allkirjanõudest loobutud |
|
|
— EL |
Δεν απαιτείται υπογραφή |
|
|
— ES |
Dispensa de firma |
|
|
— FR |
Dispense de signature |
|
|
— HR |
Oslobođeno potpisa |
|
|
— IT |
Dispensa dalla firma |
|
|
— LV |
Derīgs bez paraksta |
|
|
— LT |
Leista nepasirašyti |
|
|
— HU |
Aláírás alól mentesítve |
|
|
— MK (1) |
Изземање од потпис |
|
|
— MT |
Firma mhux meħtieġa |
|
|
— NL |
Van ondertekening vrijgesteld |
|
|
— PL |
Zwolniony ze składania podpisu |
|
|
— PT |
Dispensada a assinatura |
|
|
— RO |
Dispensă de semnătură |
|
|
— RS |
Ослобођено од потписа |
|
|
— SL |
Opustitev podpisa |
|
|
— SK |
Oslobodenie od podpisu |
|
|
— FI |
Vapautettu allekirjoituksesta |
|
|
— SV |
Befrielse från underskrift |
|
|
— EN |
Signature waived |
|
|
▼M34 ————— |
||
|
— IS |
Undanþegið undirskrift |
|
|
— NO |
Fritatt for underskrift |
|
|
— TR |
İmzadan Vazgeçme |
|
|
— BG |
ЗАБРАНЕНО ОБЩО ОБЕЗПЕЧЕНИЕ |
COMPREHENSIVE GUARANTEE PROHIBITED — 99208 |
|
— CS |
ZÁKAZ GLOBÁLNÍ ZÁRUKY |
|
|
— DA |
FORBUD MOD SAMLET KAUTION |
|
|
— DE |
GESAMTBÜRGSCHAFT UNTERSAGT |
|
|
— EE |
ÜLDTAGATISE KASUTAMINE KEELATUD |
|
|
— EL |
ΑΠΑΓΟΡΕΥΕΤΑΙ Η ΣΥΝΟΛΙΚΗ ΕΓΓΥΗΣΗ |
|
|
— ES |
GARANTÍA GLOBAL PROHIBIDA |
|
|
— FR |
GARANTIE GLOBALE INTERDITE |
|
|
— HR |
ZABRANJENO ZAJEDNIČKO JAMSTVO |
|
|
— IT |
GARANZIA GLOBALE VIETATA |
|
|
— LV |
VISPĀRĒJS GALVOJUMS AIZLIEGTS |
|
|
— LT |
NAUDOTI BENDRĄJĄ GARANTIJĄ UŽDRAUSTA |
|
|
— HU |
ÖSSZKEZESSÉG TILALMA |
|
|
— MK (1) |
ЗАБРАНА ЗА УПОТРЕБА НА ОПШТА ГАРАНЦИЈА |
|
|
— MT |
MHUX PERMESSA GARANZIJA KOMPRENSIVA |
|
|
— NL |
DOORLOPENDE ZEKERHEID VERBODEN |
|
|
— PL |
ZAKAZ KORZYSTANIA Z GWARANCJI GENERALNEJ |
|
|
— PT |
GARANTIA GLOBAL PROIBIDA |
|
|
— RO |
GARANȚIA GLOBALĂ INTERZISĂ |
|
|
— RS |
ЗАБРАЊЕНО ЗАЈЕДНИЧКО ОБЕЗБЕЂЕЊЕ |
|
|
— SL |
PREPOVEDANO SKUPNO ZAVAROVANJE |
|
|
— SK |
ZÁKAZ CELKOVEJ ZÁRUKY |
|
|
— FI |
YLEISVAKUUDEN KÄYTTÖ KIELLETTY |
|
|
— SV |
SAMLAD SÄKERHET FÖRBJUDEN |
|
|
— EN |
COMPREHENSIVE GUARANTEE PROHIBITED |
|
|
▼M34 ————— |
||
|
— IS |
ALLSHERJARTRYGGING BÖNNUÐ |
|
|
— NO |
FORBUD MOT BRUK AV UNIVERSALGARANTI. |
|
|
— TR |
KAPSAMLI TEMINAT YASAKLANMIȘTIR |
|
|
— BG |
ИЗПОЛЗВАНЕ БЕЗ ОГРАНИЧЕНИЯ |
UNRESTRICTED USE — 99209 |
|
— CS |
NEOMEZENÉ POUŽITÍ |
|
|
— DA |
UBEGRÆNSET ANVENDELSE |
|
|
— DE |
UNBESCHRÄNKTE VERWENDUNG |
|
|
— EE |
PIIRAMATU KASUTAMINE |
|
|
— ΕL |
ΑΠΕΡΙΟΡΙΣΤΗ ΧΡΗΣΗ |
|
|
— ES |
UTILIZACIÓN NO LIMITADA |
|
|
— FR |
UTILISATION NON LIMITEE |
|
|
— HR |
NEOGRANIČENA UPORABA |
|
|
— IT |
UTILIZZAZIONE NON LIMITATA |
|
|
— LV |
NEIEROBEŽOTS IZMANTOJUMS |
|
|
— LT |
NEAPRIBOTAS NAUDOJIMAS |
|
|
— HU |
KORLÁTOZÁS ALÁ NEM ESŐ HASZNÁLAT |
|
|
— MK (1) |
УПОТРЕБА БЕЗ ОГРАНИЧУВАЊЕ |
|
|
— MT |
UŻU MHUX RISTRETT |
|
|
— NL |
GEBRUIK ONBEPERKT |
|
|
— PL |
NIEOGRANICZONE KORZYSTANIE |
|
|
— PT |
UTILIZAÇÃO ILIMITADA |
|
|
— RO |
UTILIZARE NELIMITATĂ |
|
|
— RS |
НЕОГРАНИЧЕНА УПОТРЕБА |
|
|
— SL |
NEOMEJENA UPORABA |
|
|
— SK |
NEOBMEDZENÉ POUŽITIE |
|
|
— FI |
KÄYTTÖÄ EI RAJOITETTU |
|
|
— SV |
OBEGRÄNSAD ANVÄNDNING |
|
|
— EN |
UNRESTRICTED USE |
|
|
▼M34 ————— |
||
|
— IS |
ÓTAKMÖRKUÐ NOTKUN |
|
|
— NO |
UBEGRENSET BRUK |
|
|
— TR |
KISITLANMAMIȘ KULLANIM |
|
|
— BG |
Издаден впоследствие |
Issued retroactively — 99210 |
|
— CS |
Vystaveno dodatečně |
|
|
— DA |
Udstedt efterfølgende |
|
|
— DE |
Nachträglich ausgestellt |
|
|
— EE |
Välja antud tagasiulatuvalt |
|
|
— EL |
Εκδοθέν εκ των υστέρων |
|
|
— ES |
Expedido a posteriori |
|
|
— FR |
Délivré a posteriori |
|
|
— HR |
Izdano naknadno |
|
|
— IT |
Rilasciato a posteriori |
|
|
— LV |
Izsniegts retrospektīvi |
|
|
— LT |
Retrospektyvusis išdavimas |
|
|
— HU |
Kiadva visszamenőleges hatállyal |
|
|
— MK (1) |
Дополнително издадено |
|
|
— MT |
Maħruġ b'mod retrospettiv |
|
|
— NL |
Achteraf afgegeven |
|
|
— PL |
Wystawione retrospektywnie |
|
|
— PT |
Emitido a posteriori |
|
|
— RO |
Eliberat ulterior |
|
|
— RS |
Накнадно издато |
|
|
— SL |
Izdano naknadno |
|
|
— SK |
Vyhotovené dodatočne |
|
|
— FI |
Annettu jälkikäteen |
|
|
— SV |
Utfärdat i efterhand |
|
|
— EN |
Issued retroactively |
|
|
▼M34 ————— |
||
|
— IS |
Útgefið eftir á |
|
|
— NO |
Utstedt i etterhånd |
|
|
— TR |
Sonradan Düzenlenmiștir |
|
|
— BG |
Разни |
Various — 99211 |
|
— CS |
Různí |
|
|
— DA |
Diverse |
|
|
— DE |
Verschiedene |
|
|
— EE |
Erinevad |
|
|
— EL |
διάφορα |
|
|
— ES |
Varios |
|
|
— FR |
Divers |
|
|
— HR |
Razni |
|
|
— IT |
Vari |
|
|
— LV |
Dažādi |
|
|
— LT |
Įvairūs |
|
|
— HU |
Többféle |
|
|
— MK (1) |
Различни |
|
|
— MT |
Diversi |
|
|
— NL |
Diverse |
|
|
— PL |
Różne |
|
|
— PT |
Diversos |
|
|
— RO |
Diverse |
|
|
— RS |
Разно |
|
|
— SL |
Razno |
|
|
— SK |
Rôzni |
|
|
— FI |
Useita |
|
|
— SV |
Flera |
|
|
— EN |
Various |
|
|
▼M34 ————— |
||
|
— IS |
Ýmis |
|
|
— NO |
Diverse |
|
|
— TR |
Çeșitli |
|
|
— BG |
Насипно |
Bulk — 99212 |
|
— CS |
Volně loženo |
|
|
— DA |
Bulk |
|
|
— DE |
Lose |
|
|
— EE |
Pakendamata |
|
|
— EL |
χύμα |
|
|
— ES |
A granel |
|
|
— FR |
Vrac |
|
|
— HR |
Rasuto |
|
|
— IT |
Alla rinfusa |
|
|
— LV |
Berams |
|
|
— LT |
Nesupakuota |
|
|
— HU |
Ömlesztett |
|
|
— MK (1) |
Рефус |
|
|
— MT |
Bil-kwantitá |
|
|
— NL |
Los gestort |
|
|
— PL |
Luzem |
|
|
— PT |
A granel |
|
|
— RO |
Vrac |
|
|
— RS |
Расуто |
|
|
— SL |
Razsuto |
|
|
— SK |
Voľne |
|
|
— FI |
Irtotavaraa |
|
|
— SV |
Bulk |
|
|
— EN |
Bulk |
|
|
▼M34 ————— |
||
|
— IS |
Vara í lausu |
|
|
— NO |
Bulk |
|
|
— TR |
Dökme |
|
|
— BG |
Изпращач |
Consignor — 99213 |
|
— CS |
Odesílatel |
|
|
— DA |
Afsender |
|
|
— DE |
Versender |
|
|
— EE |
Saatja |
|
|
— EL |
αποστολέας |
|
|
— ES |
Expedidor |
|
|
— FR |
Expéditeur |
|
|
— HR |
Pošiljatelj |
|
|
— IT |
Speditore |
|
|
— LV |
Nosūtītājs |
|
|
— LT |
Siuntėjas |
|
|
— HU |
Feladó |
|
|
— MK (1) |
Испраќач |
|
|
— MT |
Min jikkonsenja |
|
|
— NL |
Afzender |
|
|
— PL |
Nadawca |
|
|
— PT |
Expedidor |
|
|
— RO |
Expeditor |
|
|
— RS |
Пошиљалац |
|
|
— SL |
Pošiljatelj |
|
|
— SK |
Odosielateľ |
|
|
— FI |
Lähettäjä |
|
|
— SV |
Avsändare |
|
|
— EN |
Consignor |
|
|
▼M34 ————— |
||
|
— IS |
Sendandi |
|
|
— NO |
Avsender |
|
|
— TR |
Gönderici |
|
|
(1)
Provisional code that does not affect the definitive denomination of the country to be attributed after the conclusion of the negotiations currently taking place in the United Nations. |
||
TITLE IV
INSTRUCTIONS ON THE CONTINUATION SHEETS
A. Continuation sheets may be used only if a declaration covers more than one item (see box 5). They must be presented together with a form corresponding to the SAD Convention, Annex I, Appendix 1.
B. The instructions in Titles I and II above apply equally to continuation sheets.
However:
C. If continuation sheets are used,
ANNEX B7
SPECIMEN OF STAMPS USED FOR THE BUSINESS CONTINUITY PROCEDURE
1. Stamp No 1
NCTS FALLBACK PROCEDURE
UNION TRANSIT/COMMON TRANSIT
NO DATA AVAILABLE IN THE SYSTEM
INITIATED ON
(Date/hour)
(dimensions: 26 × 59 mm)
2. Stamp No 2
BUSINESS CONTINUITY PROCEDURE
UNION TRANSIT/COMMON TRANSIT
NO DATA AVAILABLE IN THE SYSTEM
INITIATED ON
(Date/hour)
(dimensions: 26 × 59 mm)
ANNEX B8
TC10 — TRANSIT ADVICE NOTE
ANNEX B9
SPECIMEN OF A SPECIAL STAMP USED BY AN AUTHORISED CONSIGNOR
|
1 |
2 |
||
|
3 |
4 |
||
|
5 |
6 |
||
(dimensions: 55 × 25 mm)
1. Coat of arms or any other signs or letter characterising the country
2. Reference number of the customs office of departure
3. Declaration number
4. Date
5. Authorised consignor
6. Authorisation number
ANNEX B10
TC 11 — RECEIPT
ANNEX B11
LABEL
(rail transit)
▼M38 —————
ANNEX C1
GUARANTOR'S UNDERTAKING — INDIVIDUAL GUARANTEE
I. Undertaking by the guarantor
1. The undersigned ( 9 ) …
…,
resident at ( 10 )
…
…
hereby jointly and severally guarantees, at the office of guarantee of
…
up to a maximum amount of
…
in favour of the European Union (comprising the Kingdom of Belgium, the Republic of Bulgaria, the Czech Republic, the Kingdom of Denmark, the Federal Republic of Germany, the Republic of Estonia, the Hellenic Republic, the Republic of Croatia, the Kingdom of Spain, the French Republic, Ireland, the Italian Republic, the Republic of Cyprus, the Republic of Latvia, the Republic of Lithuania, the Grand Duchy of Luxembourg, Hungary, the Republic of Malta, the Kingdom of the Netherlands, the Republic of Austria, the Republic of Poland, the Portuguese Republic, Romania, the Republic of Slovenia, the Slovak Republic, the Republic of Finland, the Kingdom of Sweden, the United Kingdom of Great Britain and Northern Ireland), and the Republic of Iceland, the former Yugoslav Republic of Macedonia, the Kingdom of Norway, the Republic of Serbia, the Swiss Confederation, the Republic of Turkey ( 11 ), the Principality of Andorra and the Republic of San Marino ( 12 ), any amount for which the person providing this guarantee ( 13 ):
…
may be or become liable to the abovementioned countries for debt in the form of duty and other charges ( 14 ) with respect to the goods described below covered by the following customs operation ( 15 ):
…
…
Goods description:
…
…
…
…
2. The undersigned undertakes to pay upon the first application in writing by the competent authorities of the countries referred to in point 1 and without being able to defer payment beyond a period of 30 days from the date of application the sums requested unless he or she or any other person concerned establishes before the expiry of that period, to the satisfaction of the customs authorities, that the special procedure other than the end-use procedure has been discharged, the customs supervision of end-use goods or the temporary storage has ended correctly or, in case of the operations other than special procedures and temporary storage, that the situation of goods has been regularised.
At the request of the undersigned and for any reasons recognised as valid, the competent authorities may defer beyond a period of 30 days from the date of application for payment the period within which he or she is obliged to pay the requested sums. The expenses incurred as a result of granting this additional period, in particular any interest, must be so calculated that the amount is equivalent to what would be charged under similar circumstances on the money market or financial market in the country concerned.
3. This undertaking shall be valid from the day of its approval by the office of guarantee. The undersigned shall remain liable for payment of any debt incurred during the customs operation covered by this undertaking and commenced before any revocation or cancellation of the guarantee took effect, even if the demand for payment is made after that date.
4. For the purpose of this undertaking, the undersigned gives his or her address for service in each of the other countries referred to in point 1 as ( 16 ):
|
Country |
Surname and forenames, or name of firm, and full address |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The undersigned acknowledges that all correspondence and notices and any formalities or procedures relating to this undertaking addressed to or effected in writing at one of his or her addresses for services shall be accepted as duly delivered to him or her.
The undersigned acknowledges the jurisdiction of the courts of the places where he or she has an address for service.
The undersigned undertakes not to change his or her address for service or, if he or she has to change one or more of those addresses, to inform the office of guarantee in advance.
Done at …, on …
…
(Signature) ( 17 )
II. Approval by the office of guarantee
Office of guarantee …
…
…
Guarantor's undertaking approved on …to cover the customs operation effected under customs declaration/temporary storage declaration
No of ( 18 )
…
(Stamp and Signature)
ANNEX C2
GUARANTOR'S UNDERTAKING — INDIVIDUAL GUARANTEE IN THE FORM OF VOUCHERS
I. Undertaking by the guarantor
1. The undersigned ( 19 )
…
…,
resident at ( 20 )
…
…
hereby jointly and severally guarantees, at the office of guarantee of
…
in favour of the European Union (comprising the Kingdom of Belgium, the Republic of Bulgaria, the Czech Republic, the Kingdom of Denmark, the Federal Republic of Germany, the Republic of Estonia, the Hellenic Republic, the Republic of Croatia, the Kingdom of Spain, the French Republic, Ireland, the Italian Republic, the Republic of Cyprus, the Republic of Latvia, the Republic of Lithuania, the Grand Duchy of Luxembourg, the Republic of Hungary, the Republic of Malta, the Kingdom of the Netherlands, the Republic of Austria, the Republic of Poland, the Portuguese Republic, Romania, the Republic of Slovenia, the Slovak Republic, the Republic of Finland, the Kingdom of Sweden, the United Kingdom of Great Britain and Northern Ireland), and the Republic of Iceland, the former Yugoslav Republic of Macedonia, the Kingdom of Norway, the Republic of Serbia, the Swiss Confederation, the Republic of Turkey, the Principality of Andorra and the Republic of San Marino ( 21 ), any amount of the holder of the procedure for which the holder of the procedure may be or become liable to the abovementioned countries for debt in the form of duty and other charges due in connection with the import or export of the goods placed under the Union or common transit procedure, in respect of which the undersigned has undertaken to issue individual guarantee vouchers up to a maximum of EUR 10 000 per voucher.
2. The undersigned undertakes to pay upon the first application in writing by the competent authorities of the countries referred to in point 1 and without being able to defer payment beyond a period of 30 days from the date of application the sums requested, up to EUR 10 000 per individual guarantee voucher, unless he or she or any other person concerned establishes before the expiry of that period, to the satisfaction of the competent authorities, that the operation has been discharged.
At the request of the undersigned and for any reasons recognised as valid, the competent authorities may defer beyond a period of 30 days from the date of application for payment the period within which he or she is obliged to pay the requested sums. The expenses incurred as a result of granting this additional period, in particular any interest, must be so calculated that the amount is equivalent to what would be charged under similar circumstances on the money market or financial market in the country concerned.
3. This undertaking shall be valid from the day of its approval by the office of guarantee. The undersigned shall remain liable for payment of any debt incurred during the Union or common transit operation covered by this undertaking and commenced before any revocation or cancellation of the guarantee took effect, even if the demand for payment is made after that date.
4. For the purpose of this undertaking, the undersigned gives his or her address for service ( 22 ) in each of the other countries referred to in point 1 as:
|
Country |
Surname and forenames, or name of firm, and full address |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The undersigned acknowledges that all correspondence and notices and any formalities or procedures relating to this undertaking addressed to or effected in writing at one of his or her addresses for services shall be accepted as duly delivered to him or her.
The undersigned acknowledges the jurisdiction of the courts of the places where he or she has an address for service.
The undersigned undertakes not to change his or her address for service or, if he or she has to change one or more of those addresses, to inform the office of guarantee in advance.
Done at …
on …
…
(Signature) ( 23 )
II. Approval by the office of guarantee
Office of guarantee
…
…
Guarantor's undertaking approved on
…
…
(Stamp and Signature)
ANNEX C3
INDIVIDUAL GUARANTEE VOUCHER
Technical requirements for voucher.
The voucher shall be printed on paper free of mechanical pulp, dressed for writing purposes and weighing at least 55 g/m2. It shall have a printed guilloche pattern background in red so as to reveal any falsification by mechanical or chemical means. The paper shall be white.
The format shall be 148 by 105 millimetres.
The voucher shall show the name and address of the printer, or a mark by which it may be identified, and an identification number.
ANNEX C4
GUARANTOR'S UNDERTAKING — COMPREHENSIVE GUARANTEE
I. Undertaking by the guarantor
1. The undersigned ( 24 )
…
…,
resident at ( 25 )
…
…
hereby jointly and severally guarantees, at the office of guarantee of
…
up to a maximum amount of …
in favour of the European Union (comprising the Kingdom of Belgium, the Republic of Bulgaria, the Czech Republic, the Kingdom of Denmark, the Federal Republic of Germany, the Republic of Estonia, Ireland, the Hellenic Republic, the Kingdom of Spain, the French Republic, the Republic of Croatia, the Italian Republic, the Republic of Cyprus, the Republic of Latvia, the Republic of Lithuania, the Grand Duchy of Luxembourg, Hungary, the Republic of Malta, the Kingdom of the Netherlands, the Republic of Austria, the Republic of Poland, the Portuguese Republic, Romania, the Republic of Slovenia, the Slovak Republic, the Republic of Finland, the Kingdom of Sweden and the United Kingdom of Great Britain and Northern Ireland), and the Republic of Iceland, the former Yugoslav Republic of Macedonia, the Kingdom of Norway, the Republic of Serbia, the Swiss Confederation, the Republic of Turkey ( 26 ), the Principality of Andorra and the Republic of San Marino ( 27 ),
any amount for which the person providing this guarantee ( 28 ): …may be or become liable to the abovementioned countries for debt in the form of duty and other charges ( 29 ) which may be or have been incurred with respect to the goods covered by the customs operations indicated in point 1a and/or point 1b.
The maximum amount of the guarantee is composed of an amount of:
…
being 100/50/30 % ( 30 ) of the part of the reference amount corresponding to an amount of customs debts and other charges which may be incurred, equivalent to the sum of the amounts listed in point 1a,
and
…
being 100/30 % (30) of the part of the reference amount corresponding to an amount of customs debts and other charges which have been incurred, equivalent to the sum of the amounts listed in point 1b,
1a. The amounts forming the part of the reference amount corresponding to an amount of customs debts and, where applicable, other charges which may be incurred are following for each of the purposes listed below ( 31 ):
temporary storage — …,
Union transit procedure/common transit procedure — …,
customs warehousing procedure — …,
temporary admission procedure with total relief from import duty — …,
inward processing procedure — …,
end-use procedure — …,
if another — indicate the other kind of operation — ….
1b. The amounts forming the part of the reference amount corresponding to an amount of customs debts and, where applicable, other charges which have been incurred are as follows for each of the purposes listed below ( 32 ):
release for free circulation under normal customs declaration without deferred payment — …,
release for free circulation under normal customs declaration with deferred payment — …,
release for free circulation under a customs declaration lodged in accordance with Article 166 of Regulation (EU) No 952/2013 of the European Parliament and of the Council of 9 October 2013 laying down the Union Customs Code — …,
release for free circulation under a customs declaration lodged in accordance with Article 182 of Regulation (EU) No 952/2013 of the European Parliament and of the Council of 9 October 2013 laying down the Union Customs Code — …,
temporary admission procedure with partial relief from import duty — …,
end-use procedure — … (32) ,
if another — indicate the other kind of operation — ….
2. The undersigned undertakes to pay upon the first application in writing by the competent authorities of the countries referred to in point 1 and without being able to defer payment beyond a period of 30 days from the date of application the sums requested up to the limit of the abovementioned maximum amount, unless he or she or any other person concerned establishes before the expiry of that period, to the satisfaction of the customs authorities, that the special procedure other than the end-use procedure has been discharged, the customs supervision of end-use goods or the temporary storage has ended correctly or, in case of the operations other than special procedures, that the situation of goods has been regularised.
At the request of the undersigned and for any reasons recognised as valid, the competent authorities may defer beyond a period of 30 days from the date of application for payment the period within which he or she is obliged to pay the requested sums. The expenses incurred as a result of granting this additional period, in particular any interest, must be so calculated that the amount is equivalent to what would be charged under similar circumstances on the money market or financial market in the country concerned.
This amount may not be reduced by any sums already paid under the terms of this undertaking unless the undersigned is called upon to pay a debt incurred during a customs operation commenced before the preceding demand for payment was received or within 30 days thereafter.
3. This undertaking shall be valid from the day of its approval by the office of guarantee. The undersigned shall remain liable for payment of any debt arising during the customs operation covered by this undertaking and commenced before any revocation or cancellation of the guarantee took effect, even if the demand for payment is made after that date.
4. For the purpose of this undertaking, the undersigned gives his or her address for service ( 33 ) in each of the other countries referred to in point 1 as:
|
Country |
Surname and forenames, or name of firm, and full address |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The undersigned acknowledges that all correspondence and notices and any formalities or procedures relating to this undertaking addressed to or effected in writing at one of his or her addresses for services shall be accepted as duly delivered to him or her.
The undersigned acknowledges the jurisdiction of the courts of the places where he or she has an address for service.
The undersigned undertakes not to change his or her address for service or, if he or she has to change one or more of those addresses, to inform the office of guarantee in advance.
Done at …
on …
…
(Signature) ( 34 )
II. Approval by the office of guarantee
Office of guarantee
…
Guarantor's undertaking accepted on
…
…
(Stamp and Signature)
ANNEX C5
COMPREHENSIVE GUARANTEE CERTIFICATE
TC31 COMPREHENSIVE GUARANTEE CERTIFICATE
Front
|
1. Valid until |
Day |
Month |
Year |
2. Number |
||
|
3. Holder of the procedure (surname and forename, or name of company, full address and country) |
|
|||||
|
4. Guarantor (surname and forename, or name of company, full address and country) |
|
|||||
|
5. Customs office of guarantee (reference number) |
|
|||||
|
6. Reference amount Currency code |
In figures: |
In letters: |
||||
|
7. The customs office of guarantee certifies that the holder of the procedure named above has furnished a comprehensive guarantee which is valid for Union/common transit operations through the customs territories listed below whose names have not been crossed out: EUROPEAN UNION, ICELAND — THE FORMER YUGOSLAV REPUBLIC OF MACEDONIA — NORWAY — SERBIA — SWITZERLAND — TURKEY — ANDORRA (*1) — SAN MARINO (*1) |
||||||
|
8. Special observations |
||||||
|
9. Period of validity extended until dd/mm/yy inclusive |
|
|||||
|
Done at … on … (place) (date) (Signature and stamp of the customs office of guarantee) |
Done at … on … (place) (date) (Signature and stamp of the customs office of guarantee) |
|||||
|
(*1)
Only for the Union transit operations |
||||||
Back
10. Persons authorised to sign Union/common transit declarations on behalf of the holder of the procedure:
|
11. Surname, forename and specimen signature of authorised person |
12. Signature of the holder of the procedure (*1) |
11. Surname, forename and specimen signature of authorised person |
12. Signature of the holder of the procedure (*1) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
(*1)
Where the holder of the procedure is a legal person, the person whose signature appears in box 12 must add to his signature his surname, forename and the capacity in which he is signing. |
|||
ANNEX C6
GUARANTEE WAIVER CERTIFICATE
TC33 — GUARANTEE WAIVER CERTIFICATE
Front
|
1. Valid until |
Day |
Month |
Year |
2. Number |
||
|
3. Holder of the procedure (surname and forename, or name of company, full address and country) |
|
|||||
|
4. Customs office of guarantee (reference number) |
|
|||||
|
5. Reference amount Currency code |
In figures |
In letters |
||||
|
6. The customs office of guarantee certifies that the holder of the procedure named above has been granted a guarantee waiver in respect of his Union/common transit operations through the customs territories listed below whose names have not been crossed out: EUROPEAN UNION, ICELAND, THE FORMER YUGOSLAV REPUBLIC OF MACEDONIA, NORWAY, SERBIA, SWITZERLAND, TURKEY, ANDORRA (*1), SAN MARINO (*1) |
||||||
|
7. Special observations |
||||||
|
8. Period of validity extended until dd/mm/yy inclusive |
|
|||||
|
Done at … on … (place) (date) (Signature and stamp of the customs office of guarantee) |
Done at … on … (place) (date) (Signature and stamp of the customs office of guarantee) |
|||||
|
(*1)
Only for the Union transit operations |
||||||
Back
9. Persons authorised to sign Union/common transit declarations on behalf of the holder of the procedure
|
10. Surname, forename and specimen signature of authorised person |
11. Signature of the holder of the procedure (*1) |
10. Surname, forename and specimen signature of authorised person |
11. Signature of the holder of the procedure (*1) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
(*1)
Where the holder of the procedure is a legal person, the person whose signature appears in box 11 must add to his signature his surname, forename and the capacity in which he is signing. |
|||
ANNEX C7
EXPLANATORY NOTE ON COMPREHENSIVE GUARANTEE CERTIFICATES AND GUARANTEE WAIVER CERTIFICATES
1. Particulars to be entered on the front of a certificate
Once issued, there shall be no amendment, addition or deletion to the remarks in boxes 1 to 8 of the comprehensive guarantee certificate and boxes 1 to 7 of the guarantee waiver certificate.
1.1. Currency code
Countries shall enter in box 6 of the comprehensive guarantee certificate and Box 5 of the guarantee waiver certificate the ISO ALPHA3 (ISO 4217) code of the currency used.
1.2. Endorsements
▼M39 —————
►M39 ————— ◄ Where a ►M38 holder of the procedure ◄ has undertaken to lodge all his transit declarations at ►M39 a specific customs office of departure ◄ , the name of the office must be entered in capitals in box 8 of the comprehensive guarantee certificate or box 7 of the guarantee waiver certificate, as appropriate.
1.3. Endorsement of certificates in the event of their validity being extended
Where the period of validity of a certificate is extended, ►M38 the customs office of guarantee ◄ must endorse box 9 of the comprehensive guarantee certificate or box 8 of the guarantee waiver certificate, as appropriate.
2. Particulars to be entered on the back of a certificate — persons authorised to sign transit declarations.
2.1. When a certificate is issued, or at any time during its period of validity, the ►M38 holder of the procedure ◄ on the back the names of the persons he authorises to sign transit declarations. Each of these entries must comprise the surname and first name of the authorised person and a specimen of his signature and each must be countersigned by the ►M38 holder of the procedure ◄ . The ►M38 holder of the procedure ◄ has the option of striking through any boxes he does not wish to use.
2.2. The ►M38 holder of the procedure ◄ may revoke such authorisations at any time.
2.3. Any person whose name has been entered on the back of a certificate of this kind which is presented at ►M38 a customs office of departure ◄ is the authorised representative of the ►M38 holder of the procedure ◄ .
3. Use of such certificates where use of a comprehensive guarantee is prohibited
For procedure, see point 4 of Annex IV to Appendix I.
APPENDIX IIIa
This Appendix shall apply as of the dates of deployment of the upgrading of the NCTS referred to in the Annex to Implementing Decision (EU) 2016/578.
TRANSIT DECLARATIONS, TRANSIT ACCOMPANYING DOCUMENTS AND OTHER DOCUMENTS
Article 1
This Appendix covers the provisions, forms and specimens for making declarations and completing transit accompanying documents and other documents used in the common transit procedure in accordance with the requirements of Appendices I and II.
TITLE I
TRANSIT DECLARATION AND FORMS WHEN USING ELECTRONIC DATA PROCESSING TECHNIQUES
Article 2
Transit declaration
A transit declaration as defined in Article 25 of Appendix I shall contain the data elements specified in Annex B6a and shall conform to the formats using the codes both defined in Annex A1a.
Article 3
Transit accompanying document
The transit accompanying document shall be provided using the form set out in Annex A3a. It shall be produced and used in accordance with the explanatory notes in Annex A4a.
Article 4
List of items
The list of items shall be provided using the form set out in Annex A5a. It shall be produced and used in accordance with the explanatory notes in Annex A6a.
TITLE II
FORMS USED FOR:
Article 5
A self-copying process shall be used for the entries required:
in the case of Appendices 1 and 3, on the copies indicated in the SAD Convention, Annex II, Appendix 1;
in the case of Appendices 2 and 4, on the copies indicated in the SAD Convention, Annex II, Appendix 2.
The forms shall be completed and used:
as documents proving the customs status of Union goods, in accordance with the explanatory note in Annex B2;
as transit declarations for the business continuity procedure for transit for travellers, in accordance with the explanatory note in Annex B6.
In both cases, the codes in Annexes A1a, and B3 should be used where appropriate.
Article 6
TITLE III
FORMS OTHER THAN THE SINGLE ADMINISTRATIVE DOCUMENT AND THE TRANSIT ACCOMPANYING DOCUMENT
Article 7
Loading lists
Article 8
Transit advice note
Forms used for transit advice notes within the framework of Article 21 of Appendix I shall be provided using the form set out in Annex B8 to this Appendix.
Article 9
Receipt
The specimen for making out receipts shall be provided using the form set out in Annex B10.
Article 10
Individual guarantee
Article 11
Comprehensive guarantee and guarantee waiver certificates
The certificates shall be printed on white paper free of mechanical pulp and weighing at least 100 g/m2. They shall have a guilloche pattern background on both sides so as to reveal any falsification by mechanical or chemical means. The background shall be:
Article 12
Provisions common to all of Title III
ANNEX A1a
FORMATS AND CODES OF THE COMMON DATA REQUIREMENTS FOR TRANSIT DECLARATIONS
This Annex shall apply as of the dates of deployment of the upgrading of the NCTS referred to in the Annex to Implementing Decision (EU) 2016/578, with the exception of the provisions on data elements relating to an electronic transport document as a transit declaration as referred to in Article 55(1)(h) of Appendix I, which shall apply at the latest as of 1 May 2018.
TITLE I
GENERAL
|
1. |
The formats, codes and, if applicable, the structure of the data elements included in this Annex apply in relation to the data requirements for transit declarations, specified in Annex B6a. |
|
2. |
The formats, codes and, if applicable, the structure of the data elements defined in this Annex shall apply to transit declarations made by using an electronic data processing technique as well as to paper-based declarations. |
|
3. |
Title II includes the formats of the data elements. |
|
4. |
Whenever the information in a transit declaration dealt with in Annex B6a of this Appendix takes the form of codes, the code-list provided for in Title II shall be applied. |
|
5. |
The term ‘type/length’ in the explanation of an attribute indicates the requirements for the data type and the data length. The codes for the data types are as follows:
The number following the code indicates the admissible data length. The following applies. The optional two dots before the length indicator mean that the data has no fixed length, but it can have up to a number of digits, as specified by the length indicator. A comma in the data length means that the attribute can hold decimals, the digit before the comma indicates the total length of the attribute, the digit after the comma indicates the maximum number of digits after the decimal point. Examples of field lengths and formats:
|
|
6. |
The cardinality at header level included in the table in Title II of this Annex indicates how many times the data element may be used at header level within a transit declaration. |
|
7. |
The cardinality at item level included in the table in Title II of this Annex indicates how many times the data element may be repeated in relation to the declaration item concerned. |
|
8. |
National codes may be used by the countries for data elements 1/11 Additional procedure, 2/2 Additional information and 2/3 Documents produced, certificates and authorisations, additional references. The countries shall notify the Commission of the list of national codes used for these data elements. The Commission shall publish the list of those codes. |
TITLE II
FORMATS AND CARDINALITY OF THE COMMON DATA REQUIREMENTS FOR TRANSIT DECLARATIONS
|
D.E. order number |
D.E. name |
D.E. format (Type/length) |
Code-list in Title III (Y/N) |
Header level cardinality |
Item level cardinality |
Notes |
|
1/2 |
Additional Declaration type |
a1 |
Y |
1x |
|
|
|
1/3 |
Transit declaration |
an..5 |
Y |
1x |
1x |
|
|
1/4 |
Forms |
n..4 |
N |
1x |
|
|
|
1/5 |
Loading lists |
n..5 |
N |
1x |
|
|
|
1/6 |
Goods item number |
n...5 |
N |
|
1x |
|
|
1/8 |
Signature/authentication |
an..35 |
N |
1x |
|
|
|
1/9 |
Total number of items |
n..5 |
N |
1x |
|
|
|
2/1 |
Simplified declaration/Previous documents |
Previous document type: an..3 + Previous document reference:an..35 + Goods item identifier: n..5 |
Y |
9999x |
99x |
|
|
2/2 |
Additional information |
Coded version (Union codes): n1 + an4 OR (national codes): a1 + an4 OR Free text description: an..512 |
Y |
|
99x |
The codes are further specified in Title III |
|
2/3 |
Documents produced, certificates and authorisations, additional references |
Document type (Union codes): a1 + an3 OR (national codes): n1 + an3 + Document identifier: an..35 |
Y |
1x |
99x |
|
|
3/1 |
Exporter |
Name: an..70 + Street and number: an..70 + Country: a2 + Postcode: an..9 + City: an..35 |
N |
1x |
1x |
Country code: the alphabetic codes for countries and territories are based on the current ISO alpha 2 codes (a2) In case of groupage consignments, where paper-based declarations are used, code ‘00200 ’ may be used together with a list of exporters in accordance with the notes described for D.E. 3/1 Exporter in Title III of Annex B6a of Appendix III. |
|
3/2 |
Exporter identification number |
an..17 |
N |
2x |
2x |
For Member States of the European Union – the EORI number in the Union or a third country unique identification number recognised by the Union. For common transit countries – the EORI number in the Union (provided it has been granted and is valid at the time of the submission of the declaration) and the trader identification number in a common transit country. |
|
3/9 |
Consignee |
Name: an..70 + Street and number: an..70 + Country: a2 + Postcode: an..9 + City: an..35 |
N |
1x |
1x |
The country code as defined for D.E. 3/1 Exporter shall be used. In case of groupage consignments, where paper-based declarations are used, code ‘00200 ’ may be used together with a list of consignees in accordance with the notes described for D.E. 3/9 Consignee in Title III of Annex B6a of Appendix III. |
|
3/10 |
Consignee identification number |
an..17 |
N |
2x |
2x |
The identification number as defined for D.E. 3/2 Exporter identification number shall be used |
|
3/19 |
Representative |
Name: an..70 + Street and number: an..70 + Country: a2 + Postcode: an..9 + City: an..35 |
N |
1x |
|
The country code as defined for D.E. 3/1 Exporter shall be used |
|
3/20 |
Representative identification number |
an..17 |
N |
2x |
|
The identification number as defined for D.E. 3/2 Exporter identification number shall be used |
|
3/21 |
Representative status code |
n1 |
Y |
1x |
|
|
|
3/22 |
Holder of the transit procedure |
Name: an..70 + Street and number: an..70 + Country: a2 + Postcode: an..9 + City: an..35 |
N |
1x |
|
The country code as defined for D.E. 3/1 Exporter shall be used. |
|
3/23 |
Holder of the transit procedure identification number |
an..17 |
N |
2x |
|
The identification number as defined for D.E. 3/2 Exporter identification number shall be used |
|
3/37 |
Additional supply chain actor(s) identification number |
Role code: a..3 + Identifier: an..17 |
Y |
99x |
99x |
The role codes for the additional supply chain actors are defined in Title II. The identification number as defined for D.E. 3/2 Exporter identification number shall be used |
|
5/4 |
Declaration date |
n8 (yyyymmdd) |
N |
1x |
|
|
|
5/5 |
Declaration place |
an..35 |
N |
1x |
|
|
|
5/6 |
Office of destination (and country) |
an8 |
N |
1x |
|
The structure of the customs office identifier is defined in Title III. |
|
5/7 |
Intended office of transit (and country) |
an8 |
N |
9x |
|
The identifier of the customs office shall follow the structure defined for D.E. 5/6 Office of destination (and country). |
|
5/8 |
Country of destination code |
a2 |
N |
1x |
|
The country code as defined for D.E. 3/1 Exporter shall be used |
|
5/21 |
Place of loading |
Coded: an..17 OR Free text description: a2 (country code) + an..35 (location) |
N |
1x |
|
Where the place of loading is coded according to the UN/LOCODE, the information shall be the UN/LOCODE as defined in Title III for D.E. 5/6 Office of destination (and country). Where the place of loading is not coded according to the UN/LOCODE, the country where the place of loading is located is identified by the code as defined for D.E 3/1 Exporter. |
|
5/23 |
Location of goods |
Country: a2 + Type of location: a1 + Qualifier of the identification: a1 + Coded Identification of location: an..35 + Additional identifier: n..3 OR Free text description Street and number: an..70 + Postcode: an..9 + City: an..35 |
Y |
1x |
|
The structure of the code is defined in Title III. |
|
6/1 |
Net mass (kg) |
n..16,6 |
N |
|
1x |
|
|
6/5 |
Gross mass (kg) |
n..16,6 |
N |
1x |
1x |
|
|
6/8 |
Description of goods |
an..512 |
N |
|
1x |
|
|
6/9 |
Type of packages |
|
N |
|
99x |
The code-list corresponds to the latest version of UN/ECE Recommendations 21 |
|
6/10 |
Number of packages |
n..8 |
N |
|
99x |
|
|
6/11 |
Shipping marks |
an..512 |
N |
|
99x |
|
|
6/13 |
CUS code |
an8 |
N |
|
1x |
Code assigned within the European Customs Inventory of Chemicals Substances (ECICS) |
|
6/14 |
Commodity code-Combined nomenclature code |
an..8 |
N |
|
1x |
|
|
6/18 |
Total packages |
n..8 |
N |
1x |
|
|
|
7/1 |
Transhipment |
Place of transhipment: Country: a2 + Type of location: a1 + Qualifier of the identification: a1 + Coded Identification of location: an..35 + Additional identifier: n..3 OR Free text description Street and number: an..70 + Postcode: an..9 + City: an..35 + Identity of new means of transport Type of identification: n2 + Identification number: an..35 + Nationality of new means of transport: a2 + |
N |
1x |
|
The country code as defined for D.E. 3/1 Exporter shall be used. The place of transhipment shall follow the structure of D.E. 5/23 Location of goods. The identity of means of transport shall follow the structure of D.E. 7/7 Identity of means of transport at departure. The nationality of means of transport shall follow the structure of D.E. 7/8 Nationality of means of transport at departure. |
|
Indicator whether the consignment is containerised or not: n1 |
For the indicator whether the goods are containerised, the codes provided for D.E. 7/2 Container in Title III shall be used. |
|||||
|
7/2 |
Container |
n1 |
Y |
1x |
|
|
|
7/4 |
Mode of transport at the border |
n1 |
Y |
|
|
|
|
7/5 |
Inland mode of transport |
n1 |
N |
1x |
1x |
The codes provided for in Title III as regards D.E. 7/4 Mode of transport at the border shall be used. |
|
7/7 |
Identity of means of transport at departure |
Type of identification: n2 + Identification number: an..35 |
Y |
1x |
1x |
|
|
7/8 |
Nationality of means of transport at departure |
a2 |
N |
1x |
1x |
The country code as defined for D.E. 3/1 Exporter shall be used. |
|
7/10 |
Container identification number |
an..17 |
N |
9999x |
9999x |
|
|
7/14 |
Identity of active means of transport crossing the border |
Type of identification: n2 + Identification number: an..35 |
N |
1x |
1x |
The codes defined for D.E. 7/7 Identity of means of transport at departure shall be used for the type of identification. |
|
7/15 |
Nationality of active means of transport crossing the border |
a3 |
N |
1x |
1x |
The country code as defined for D.E. 3/1 Exporter shall be used. |
|
7/18 |
Seal number |
Number of seals: n..4 + Seal identifier: an..20 |
N |
1x 9999x |
1x 9999x |
|
|
7/19 |
Other incidents during carriage |
an..512 |
N |
1x |
|
|
|
8/2 |
Guarantee type |
an1 |
Y |
9x |
|
|
|
8/3 |
Guarantee reference |
GRN: an..24 + Access code: an..4 + Currency code: a3 + Amount of a debt: n..16,2 + Customs office of guarantee: an8 |
N |
99x |
|
The ISO-alpha-3 currency codes (ISO 4217) shall be used for the currency. The identifier of the customs office shall follow the structure defined for D.E. 5/6 Office of destination (and country). |
|
8/4 |
Guarantee not valid in |
a2 |
N |
99x |
|
The country code as defined for D.E. 3/1 Exporter shall be used |
TITLE III
CODES IN RELATION WITH THE COMMON DATA REQUIREMENTS FOR A TRANSIT DECLARATION
This Title contains the codes to be used on standard electronic and paper-based transit declarations.
1/2. Additional Declaration type
|
D |
for lodging a transit declaration in accordance with Article 29a, Appendix I to the Convention. |
1/3. Transit Declaration
Codes to be used in the context of transit:
|
T |
Mixed consignments comprising both goods which have the customs status of Union goods and which do not have the customs status of Union goods placed under the common transit procedure. |
|
T1 |
Goods not having the customs status of Union goods, which are placed under the common transit procedure. |
|
T2 |
Goods having the customs status of Union goods, which are placed under the common transit procedure. |
|
T2F |
Goods having the customs status of Union goods, which are moved between a part of the customs territory of the Union where the provisions of Directive 2006/112/EC or Directive 2008/118/EC do not apply and a common transit country. |
|
C |
Union goods not placed under a common transit procedure in the context of the application of Article 55(1)(h) of Appendix I. |
|
TD |
Goods already placed under a transit procedure in the context of the application of Article 55(1)(h) of Appendix I. |
|
X |
Union goods to be exported, not placed under a transit procedure in the context of the application of Article 55(1)(h) of Appendix I. |
2/1. Simplified declaration/Previous documents
This data element consists of alphanumeric codes.
Each code has three components. The first component (an..3), which consists of a combination of digits and/or letters, serves to identify the type of document. The second component (an..35) represents the data needed to recognise that document, either its identification number or another recognisable reference. The third component (an..5) is used to identify which item of the previous document is being referred to.
Where a paper-based customs declaration is lodged, the three components are separated by dashes (-).
1. The first component (an..3):
Choose the abbreviation for the document from the ‘list of abbreviations for documents’ below.
List of abbreviations for documents
(numeric codes extracted from the 2014b UN Directories for electronic data interchange for administration, commerce and transport: List of code for data element 1001, Document/message name, coded.)
|
Container list |
235 |
|
Delivery note |
270 |
|
Packing list |
271 |
|
Pro forma invoice |
325 |
|
Temporary storage declaration |
337 |
|
Entry summary declaration |
355 |
|
Commercial invoice |
380 |
|
House waybill |
703 |
|
Master bill of lading |
704 |
|
Bill of lading |
705 |
|
House bill of lading |
714 |
|
Rail consignment note |
720 |
|
Road consignment note |
730 |
|
Air waybill |
740 |
|
Master air waybill |
741 |
|
Despatch note (post parcels) |
750 |
|
Multimodal/combined transport document |
760 |
|
Cargo manifest |
785 |
|
Bordereau |
787 |
|
Transit declaration – mixed consignments (T) |
820 |
|
Transit declaration (T1) |
821 |
|
Transit declaration (T2) |
822 |
|
Transit declaration (T2F) |
T2F |
|
Proof of the customs status of Union goods T2L |
825 |
|
Proof of the customs status of Union goods T2LF |
T2G |
|
TIR carnet |
952 |
|
ATA carnet |
955 |
|
Reference/date of entry in the declarant's records |
CLE |
|
Information sheet INF3 |
IF3 |
|
Simplified declaration |
SDE |
|
Declaration MRN |
MRN |
|
Cargo manifest simplified procedure |
MNS |
|
Other |
ZZZ |
2. The second component (an..35):
The identification number or another recognisable reference of the document is inserted here.
In case the MRN is referred to as previous document, the reference number shall have the following structure:
|
Field |
Content |
Format |
Examples |
|
1 |
Last two digits of year of formal acceptance of the declaration (YY) |
n2 |
15 |
|
2 |
Identifier of the country where the transit declaration is lodged (alpha 2 country code) |
a2 |
RO |
|
3 |
Unique identifier for message per year and country |
an12 |
9876AB889012 |
|
4 |
Procedure identifier |
a1 |
B |
|
5 |
Check digit |
an1 |
5 |
Fields 1 and 2 as explained above.
Field 3 shall be filled in with an identifier for the message concerned. The way that field is used is under the responsibility of the countries, but each message handled during one year within the given country must have a unique number in relation to the procedure concerned.
The countries that want to have the reference number of the competent customs office included in the MRN, may use up to the first 6 characters to represent it.
Field 4 shall be filled in with an identifier of the procedure defined in the table below.
Field 5 shall be filled with a value that is a check digit for the whole MRN. This field allows for detection of an error when capturing the whole MRN.
Codes to be used in field 4 Procedure identifier:
|
Code |
Procedure |
|
A |
Export only |
|
B |
Export and exit summary declaration |
|
C |
Exit summary declaration only |
|
D |
Re-export notification |
|
E |
Dispatch of goods in relation with special fiscal territories |
|
J |
Transit declaration only |
|
K |
Transit declaration and exit summary declaration |
|
L |
Transit declaration and entry summary declaration |
|
M |
Proof of the customs status of Union goods |
|
R |
Import declaration only |
|
S |
Import declaration and entry summary declaration |
|
T |
Entry summary declaration only |
|
U |
Temporary storage declaration |
|
W |
Temporary storage declaration and entry summary declaration |
3. The third component (an..5):
The item number of the goods concerned as provided in D.E. 1/6. Goods item number on the previous document.
Example:
The declaration item concerned was the 5th item on the T1 transit document (previous document) to which the office of destination has assigned the number ‘238544’. The code will therefore be ‘821-238544-5’. (‘821’ for the transit procedure, ‘238544’ for the document's registration number (or the MRN for the NCTS operations) and ‘5’ for the item number).
Where, in the case of paper-based transit declarations, more than one reference has to be entered, and the countries provide that a coded information shall be used, code 00200 as defined in D.E. 2/2 Additional information shall be applicable.
2/2. Additional information
A five-digit code is used to encode additional information of a customs nature. This code follows the additional information unless the Contracting Parties law provides for the code to be used in place of the text.
The codes ‘00200 ’ and ‘00300 ’ are used only in case of paper-based transit declarations, if applicable.
The codes ‘20100 ’, ‘20200 ’ and ‘20300 ’ are used in case of paper-based and electronic transit declarations, if applicable.
|
Legal basis |
Subject |
Additional information |
Code |
|
Annex B6a, Title III |
Several occurrences of documents and parties |
‘Various’ |
00200 |
|
Annex B6a, Title III |
Identity between declarant and consignor |
‘Consignor’ |
00300 |
|
Article 18 of the Convention |
Export from one Contracting Party or from the Union subject to restriction. |
|
20 100 |
|
Article 18 of the Convention |
Export from one Contracting Party or from the Union subject to duties. |
|
20 200 |
|
Article 18 of the Convention |
Export |
‘Export’ |
20 300 |
2/3. Documents produced, certificates and authorisations, additional references
Documents, certificates and authorisations from a Contracting Party or a third country that are produced in support of the transit declaration, and additional references, shall be entered in the form of a code defined in Title II, followed either by an identification number or another recognisable reference. The list of documents, certificates and authorisations, and of additional references and their respective codes can be found in the TARIC database.
National documents, certificates and authorisations produced in support of the transit declaration, and additional references, shall be entered in the form of a code as defined in Title II, possibly followed either by an identification number or another recognisable reference. The four characters represent codes based on that country's own nomenclature.
3/1. Exporter
In the case of groupage consignments, where paper-based transit declarations are used, and the countries provide for the use of coded information, code 00200 as defined in D.E. 2/2 (Additional information) shall be applicable.
3/2. Exporter identification number
For the Member States of the European Union – indicate the EORI number in the Union or a third country unique identification number recognised by the Union.
For common transit countries – indicate both: the EORI number in the Union and the trader identification number in a common transit country. If the EORI number has not been granted, indicate only the trader identification number in a common transit country.
3/9. Consignee
In the case of groupage consignments, where paper-based transit declarations are used, and the countries provide for the use of coded information, code 00200 as defined in D.E. 2/2 Additional information shall be applicable.
3/10. Consignee identification number
For the Member States of the European Union – indicate the EORI number in the Union or a third country unique identification number recognised by the Union.
For common transit countries – indicate both: the EORI number in the Union and the trader identification number in a common transit country. If the EORI number has not been granted, indicate only the trader identification number in a common transit country.
3/20. Representative identification number
For the Member States of the European Union – indicate the EORI number in the Union or a third country unique identification number recognised by the Union.
For common transit countries – indicate both: the EORI number in the Union and the trader identification number in a common transit country. If the EORI number has not been granted, indicate only the trader identification number in a common transit country.
3/21. Representative status code
Insert one of the following codes (n1) before the full name and address to designate the status of the representative:
|
2. |
Representative — direct representation (the customs representative acts in the name of and on behalf of another person) |
|
3. |
Representative — indirect representation (the customs representative acts in his or her own name, but on behalf of another person) |
Where this data element is printed on a paper document, it will be in square brackets (Ex: [2] or [3]).
3/22. Holder of the transit procedure
For the Member States of the European Union – indicate the EORI number in the Union or a third country unique identification number recognised by the Union.
For common transit countries – indicate both: the EORI number in the Union and the trader identification number in a common transit country. If the EORI number has not been granted, indicate only the trader identification number in a common transit country.
3/37. Additional supply chain actor(s) identification number
This data element consists of two components:
1. Role code
The following parties can be declared:
|
Role Code |
Party |
Description |
|
CS |
Consolidator |
Freight forwarder combining individual smaller consignments into a single larger consignment (in a consolidation process) that is sent to a counterpart who mirrors the consolidator's activity by dividing the consolidated consignment into its original components |
|
MF |
Manufacturer |
Party which manufactures goods |
|
FW |
Freight Forwarder |
Party undertaking forwarding of goods |
|
WH |
Warehouse Keeper |
Party taking responsibility for goods entered into a warehouse |
2. Identification No of the party
The structure of that number corresponds to the structure as specified for D.E. 3/2 Exporter identification No.
5/6. Office of destination (and country)
Use (an8) codes structured as follows:
The first three characters (an3) would be taken up by the UN/LOCODE ( 35 ) location name and the last three by a national alphanumeric subdivision (an3). If this subdivision is not used, the characters ‘000’ should be inserted.
Example: BEBRU000: BE = ISO 3166 for Belgium, BRU = UN/LOCODE location name for the city of Brussels, 000 for the unused subdivision.
5/23. Location of goods
Use the ISO alpha 2 country codes used in field 1 of D.E. 3/1 Exporter.
For the type of location, use the codes specified below:
|
A |
Designated location |
|
B |
Authorised place |
|
C |
Approved place |
|
D |
Other |
For the identification of the location use one of the identifiers below:
|
Qualifier |
Identifier |
Description |
|
U |
UN/LOCODE |
Use the codes defined in the UN/LOCODE Code List by Country |
|
V |
Customs office identifier |
Use the codes specified under D.E. 5/6 Office of destination and country |
|
W |
GPS coordinates |
Decimal degrees with negative numbers for South and West. Examples: 44.424896°/8.774792° or 50.838068°/4.381508° |
|
X |
The EORI number in the Union or a third country unique identification number recognised by the Union or the trader identification number in common transit countries |
Use the identification number as specified in the description for D.E. 3/2 Exporter identification number. In case the economic operator has more than one premises, the number shall be completed by an identifier unique for the location concerned |
|
Y |
Authorisation number |
Enter the authorisation number of the location concerned, i.e. authorisation for the status of authorised consignor. In case the authorisation concerns more than one premises, the authorisation number shall be completed by an identifier unique for the location concerned. |
In case code ‘X’ or ‘Y’ is used for the identification of the location, and there are several locations associated with the EORI number or the authorisation number concerned, an additional identifier may be used to enable the unambiguous identification of the location.
7/2. Container
|
0. |
Goods not transported in containers |
|
1. |
Goods transported in containers. |
7/4. Mode of transport at the border
The codes applicable are given below:
|
Code |
Description |
|
2 |
Rail transport |
|
3 |
Road transport |
|
4 |
Air transport |
|
5 |
Mail (Active mode of transport unknown) |
|
7 |
Fixed transport installations |
|
8 |
Inland waterways |
|
9 |
Mode unknown (i.e. own propulsion) |
7/7. Identity of means of transport at departure
Identity of means of transport at departure
|
Code |
Description |
|
20 |
Wagon number |
|
30 |
Registration number of the road vehicle |
|
40 |
IATA flight number |
|
41 |
Registration number of the aircraft |
|
81 |
Name of the inland waterways vessel |
8/2. Guarantee type
Guarantee codes
The codes applicable are given below:
|
Description |
Code |
|
For guarantee waiver (Article 75(2)(c) of Appendix I |
0 |
|
For comprehensive guarantee (Article 75(1) and (2)(a) and (b) of Appendix I |
1 |
|
For individual guarantee in the form of an undertaking by a guarantor (Article 20 of Appendix I) |
2 |
|
For individual guarantee in cash (Article 19 of Appendix I) |
3 |
|
For individual guarantee in the form of vouchers (Article 21 of Appendix I) |
4 |
|
For guarantee waiver for the journey between the customs office of departure and the customs office of transit (Article 10(2)(b) of the Convention) |
7 |
|
For individual guarantee of the type under point 3 of Annex I to Appendix I. |
9 |
|
For guarantee not required for goods carried by fixed transport installations (Article 13(1)(c) of Appendix I) |
C |
|
For guarantee waiver by agreement (Article 10(2)(a) of the Convention) |
A |
|
For guarantee not required for goods placed under the common transit procedure in accordance with Article 13(1)(a) of Appendix I. |
H |
TITLE IV
LINGUISTIC REFERENCES AND THEIR CODES
|
Linguistic reference |
Codes |
|
BG Ограничена валидност CS Omezená platnost DA Begrænset gyldighed DE Beschränkte Geltung EE Piiratud kehtivus EL Περιορισμένη ισχύς ES Validez limitada FR Validité limitée HR Ograničena valjanost IT Validità limitata LV Ierobežots derīgums LT Galiojimas apribotas HU Korlátozott érvényű MK (1) Ограничено важење MT Validità limitata NL Beperkte geldigheid PL Ograniczona ważność PT Validade limitada RO Validitate limitată RS Ограничена важност SL Omejena veljavnost SK Obmedzená platnosť FI Voimassa rajoitetusti SV Begränsad giltighet EN Limited validity IS Takmarkað gildissvið NO Begrenset gyldighet TR Sınırlı Geçerli |
Limited validity — 99200 |
|
BG Освободено CS Osvobození DA Fritaget DE Befreiung EE Loobutud EL Απαλλαγή ES Dispensa FR Dispense HR Oslobođeno IT Dispensa LV Derīgs bez zīmoga LT Leista neplombuoti HU Mentesség MK (1) Изземање MT Tneħħija NL Vrijstelling PL Zwolnienie PT Dispensa RO Derogarea RS Ослобођење SL Opustitev SK Upustenie FI Vapautettu SV Befrielse EN Waiver IS Undanþegið NO Fritak TR Vazgeçme |
Waiver – 99201 |
|
BG Алтернативно доказателство CS Alternativní důkaz DA Alternativt bevis DE Alternativnachweis EE Alternatiivsed tõendid EL Εναλλακτική απόδειξη ES Prueba alternativa FR Preuve alternative HR Alternativni dokaz IT Prova alternativa LV Alternatīvs pierādījums LT Alternatyvusis įrodymas HU Alternatív igazolás MK (1) Алтернативен доказ MT Prova alternattiva NL Alternatief bewijs PL Alternatywny dowód PT Prova alternativa RO Probă alternativă RS Алтернативни доказ SL Alternativno dokazilo SK Alternatívny dôkaz FI Vaihtoehtoinen todiste SV Alternativt bevis EN Alternative proof IS Önnur sönnun NO Alternativt bevis TR Alternatif Kanıt |
Alternative proof – 99202 |
|
BG Различия: митническо учреждение, където стоките са представени (наименование и страна CS Nesrovnalosti: úřad, kterému bylo zboží předloženo … (název a země) DA Forskelle: det sted, hvor varerne blev frembudt … (navn og land) DE Unstimmigkeiten: Stelle, bei der die Gestellung erfolgte … (Name und Land) EE Erinevused: asutus, kuhu kaup esitati … (nimi ja riik) EL Διαφορές: εμπορεύματα προσκομισθέντα στο τελωνείο … (Όνομα και χώρα) ES Diferencias: mercancías presentadas en la oficina … (nombre y país) FR Différences: marchandises présentées au bureau … (nom et pays) HR Razlike:Carinarnica kojoj je roba podnesena … (naziv i zemlja) IT Differenze: ufficio al quale sono state presentate le merci … (nome e paese) LV Atšķirības: muitas iestāde, kurā preces tika uzrādītas (nosaukums un valsts) LT Skirtumai: įstaiga, kuriai pateiktos prekės (pavadinimas ir valstybė) HU Eltérések: hivatal, ahol az áruk bemutatása megtörtént … (név és ország) MK (1) Разлики: Испостава каде стоките се ставени на увид … (назив и земја) MT Differenzi: uffiċċju fejn l-oġġetti kienu ppreżentati (isem u pajjiż) NL Verschillen: kantoor waar de goederen zijn aangebracht … (naam en land) PL Niezgodności: urząd, w którym przedstawiono towar … (nazwa i kraj) PT Diferenças: mercadorias apresentadas na estância … (nome e país) RO Diferențe: mărfuri prezentate la biroul vamal … (nume și țara) RS Разлике: царински орган којем је предата роба … (назив и земља) SL Razlike: urad, pri katerem je bilo blago predloženo … (naziv in država) SK Rozdiely: úrad, ktorému bol tovar predložený … (názov a krajina) FI Muutos: toimipaikka, jossa tavarat esitetty … (nimi ja maa) SV Avvikelse: tullkontor där varorna anmäldes … (namn och land) EN Differences: office where goods were presented … (name and country) IS Breying: tollstjóraskrifstofa þar sem vörum var framvísað … (nafn og land) NO Forskjell: det tollsted hvor varene ble fremlagt … (navn og land) TR Değișiklikler: Eșyanın sunulduğu idare … (adı ve ülkesi). |
Differences: office where goods were presented …(name and country) – 99203 |
|
BG Излизането от … подлежи на ограничения или такси съгласно Регламент/Директива/Решение № …, CS Výstup ze … podléhá omezením nebo dávkám podle nařízení/směrnice/rozhodnutí č. … DA Udpassage fra … undergivet restriktioner eller afgifter i henhold til forordning/direktiv/afgørelse nr. … DE Ausgang aus … — gemäß Verordnung/Richtlinie/Beschluss Nr. … Beschränkungen oder Abgaben unterworfen. EE … territooriumilt väljumise suhtes kohaldatakse piiranguid ja makse vastavalt määrusele/direktiivile/otsusele nr … EL Η έξοδος από … υποβάλλεται σε περιορισμούς ή σε επιβαρύνσεις από τον κανονισμό/την οδηγία/την απόφαση αριθ. … ES Salida de … sometida a restricciones o imposiciones en virtud del (de la) Reglamento/Directiva/Decisión no … FR Sortie de … soumise à des restrictions ou à des impositions par le règlement ou la directive/décision no … HR Izlaz iz … podliježe ograničenjima ili pristojbama temeljem Uredbe/Direktive/Odluke br … IT Uscita dal … soggetta a restrizioni o ad imposizioni a norma del(la) regolamento/direttiva/decisione n. … LV Izvešana no …, piemērojot ierobežojumus vai maksājumus saskaņā ar Regulu/Direktīvu/Lēmumu Nr. …, LT Išvežimui iš … taikomi apribojimai arba mokesčiai, nustatyti Reglamentu/Direktyva/Sprendimu Nr. …, HU A kilépés … területéről a … rendelet/irányelv/határozat szerinti korlátozás vagy teher megfizetésének kötelezettsége alá esik MK (1) Излез од … предмет на ограничувања или давачки согласно Уредба/Директива/Решение № …. MT Ħruġ mill-… suġġett għall restrizzjonijiet jew ħlasijiet taħt Regola/Direttiva/Deċiżjoni Nru … NL Bij uitgang uit de … zijn de beperkingen of heffingen van Verordening/Richtlijn/Besluit nr. … van toepassing. PL Wyprowadzenie z … podlega ograniczeniom lub opłatom zgodnie z rozporządzeniem/dyrektywą/decyzją nr … PT Saída da … sujeita a restrições ou a imposições pelo(a) Regulamento/Directiva/Decisão n.o … RO Ieșire din … supusă restricțiilor sau impunerilor în temeiul Regulamentului/Directivei/Deciziei nr … RS Излаз из … подлеже ограничењима или дажбинама на основу Уредбе/Директиве/Одлуке бр … SL Iznos iz … zavezan omejitvam ali obveznim dajatvam na podlagi Uredbe/Direktive/Odločbe št. … SK Výstup z … podlieha obmedzeniam alebo platbám podľa nariadenia/smernice/rozhodnutia č. …. FI … vientiin sovelletaan asetuksen/direktiivin/päätöksen N:o … mukaisia rajoituksia tai maksuja SV Utförsel från … underkastad restriktioner eller avgifter i enlighet med förordning/direktiv/beslut nr … EN Exit from … subject to restrictions or charges under Regulation/Directive/Decision No … IS Útflutningur frá … háð takmörkunum eða gjöldum samkvæmt reglugerð/fyrirmælum/ákvörðun nr. …. NO Utførsel fra … underlagt restriksjoner eller avgifter i henhold til forordning/direktiv/vedtak nr. …. TR Eșyanın … 'dan çıkıșı.…. No.lu Tüzük/Direktif/Karar kapsamında kısıtlamalara veya mali yükümlülüklere tabidir |
Exit from … subject to restrictions or charges under Regulation/Directive/Decision No … – 99204 |
|
BG Одобрен изпращач CS Schválený odesílatel DA Godkendt afsender DE Zugelassener Versender EE Volitatud kaubasaatja EL Εγκεκριμένος αποστολέας ES Expedidor autorizado FR Expéditeur agréé HR Ovlašteni pošiljatelj IT Speditore autorizzato LV Atzītais nosūtītājs LT Įgaliotas gavéjas HU Engedélyezett feladó MK (1) Овластен испраќач MT Awtorizzat li jibgħat NL Toegelaten afzender PL Upoważniony nadawca PT Expedidor autorizado RO Expeditor agreat RS Овлашћени пошиљалац SL Pooblaščeni pošiljatelj SK Schválený odosielateľ FI Valtuutettu lähettäjä SV Godkänd avsändare EN Authorised consignor IS Viðurkenndur sendandi NO Autorisert avsender TR İzinli Gönderici. |
Authorised consignor – 99206 |
|
BG Освободен от подпис CS Podpis se nevyžaduje DA Fritaget for underskrift DE Freistellung von der Unterschriftsleistung EE Allkirjanõudest loobutud EL Δεν απαιτείται υπογραφή ES Dispensa de firma FR Dispense de signature HR Oslobođeno potpisa IT Dispensa dalla firma LV Derīgs bez paraksta LT Leista nepasirašyti HU Aláírás alól mentesítve MK (1) Изземање од потпис MT Firma mhux meħtieġa NL Van ondertekening vrijgesteld PL Zwolniony ze składania podpisu PT Dispensada a assinatura RO Dispensă de semnătură RS Ослобођено од потписа SL Opustitev podpisa SK Upustenie od podpisu FI Vapautettu allekirjoituksesta SV Befrielse från underskrift EN Signature waived IS Undanþegið undirskrift NO Fritatt for underskrift TR İmzadan Vazgeçme |
Signature waived – 99207 |
|
BG ЗАБРАНЕНО ОБЩО ОБЕЗПЕЧЕНИЕ CS ZÁKAZ SOUBORNÉ JISTOTY DA FORBUD MOD SAMLET SIKKERHEDSSTILLELSE DE GESAMTBÜRGSCHAFT UNTERSAGT EE ÜLDTAGATISE KASUTAMINE KEELATUD EL ΑΠΑΓΟΡΕΥΕΤΑΙ Η ΣΥΝΟΛΙΚΗ ΕΓΓΥΗΣΗ ES GARANTÍA GLOBAL PROHIBIDA FR GARANTIE GLOBALE INTERDITE HR ZABRANJENO ZAJEDNIČKO JAMSTVO IT GARANZIA GLOBALE VIETATA LV VISPĀRĒJS GALVOJUMS AIZLIEGTS LT NAUDOTI BENDRĄJĄ GARANTIJĄ UŽDRAUSTA HU ÖSSZKEZESSÉG TILOS MK (1) ЗАБРАНА ЗА УПОТРЕБА НА ОПШТА ГАРАНЦИЈА MT MHUX PERMESSA GARANZIJA KOMPRENSIVA NL DOORLOPENDE ZEKERHEID VERBODEN PL ZAKAZ KORZYSTANIA Z GWARANCJI GENERALNEJ PT GARANTIA GLOBAL PROIBIDA RO GARANȚIA GLOBALĂ INTERZISĂ RS ЗАБРАЊЕНО ЗАЈЕДНИЧКО ОБЕЗБЕЂЕЊЕ SL PREPOVEDANO SPLOŠNO ZAVAROVANJE SK ZÁKAZ CELKOVEJ ZÁRUKY FI YLEISVAKUUDEN KÄYTTÖ KIELLETTY SV SAMLAD SÄKERHET FÖRBJUDEN EN COMPREHENSIVE GUARANTEE PROHIBITED IS ALLSHERJARTRYGGING BÖNNUÐ NO FORBUD MOT BRUK AV UNIVERSALGARANTI TR KAPSAMLI TEMİNAT YASAKLANMIȘTIR. |
COMPREHENSIVE GUARANTEE PROHIBITED – 99208 |
|
BG ИЗПОЛЗВАНЕ БЕЗ ОГРАНИЧЕНИЯ CS NEOMEZENÉ POUŽITÍ DA UBEGRÆNSET ANVENDELSE DE UNBESCHRÄNKTE VERWENDUNG EE PIIRAMATU KASUTAMINE ΕL ΑΠΕΡΙΟΡΙΣΤΗ ΧΡΗΣΗ ES UTILIZACIÓN NO LIMITADA FR UTILISATION NON LIMITÉE HR NEOGRANIČENA UPORABA IT UTILIZZAZIONE NON LIMITATA LV NEIEROBEŽOTS IZMANTOJUMS LT NEAPRIBOTAS NAUDOJIMAS HU KORLÁTOZÁS ALÁ NEM ESŐ HASZNÁLAT MK (1) УПОТРЕБА БЕЗ ОГРАНИЧУВАЊЕ MT UŻU MHUX RISTRETT NL GEBRUIK ONBEPERKT PL NIEOGRANICZONE KORZYSTANIE PT UTILIZAÇÃO ILIMITADA RO UTILIZARE NELIMITATĂ RS НЕОГРАНИЧЕНА УПОТРЕБА SL NEOMEJENA UPORABA SK NEOBMEDZENÉ POUŽITIE FI KÄYTTÖÄ EI RAJOITETTU SV OBEGRÄNSAD ANVÄNDNING EN UNRESTRICTED USE IS ÓTAKMÖRKUÐ NOTKUN NO UBEGRENSET BRUK TR KISITLANMAMIȘ KULLANIM |
UNRESTRICTED USE – 99209 |
|
BG Издаден впоследствие CS Vystaveno dodatečně DA Udstedt efterfølgende DE Nachträglich ausgestellt EE Välja antud tagasiulatuvalt EL Εκδοθέν εκ των υστέρων ES Expedido a posteriori FR Délivré a posteriori HR Izdano naknadno IT Rilasciato a posteriori LV Izsniegts retrospektīvi LT Retrospektyvusis išdavimas HU Kiadva visszamenőleges hatállyal MK (1) Дополнително издадено MT Maħruġ b'mod retrospettiv NL Achteraf afgegeven PL Wystawione retrospektywnie PT Emitido a posteriori RO Eliberat ulterior RS Накнадно издато SL Izdano naknadno SK Vyhotovené dodatočne FI Annettu jälkikäteen SV Utfärdat i efterhand EN Issued retroactively IS Útgefið eftir á NO Utstedt i etterhånd TR Sonradan Düzenlenmiștir |
Issued retroactively – 99210 |
|
BG Разни CS Různí DA Diverse DE Verschiedene EE Erinevad EL Διάφορα ES Varios FR Divers HR Razni IT Vari LV Dažādi LT Įvairūs HU Többféle MK (1) Различни MT Diversi NL Diversen PL Różne PT Diversos RO Diverse RS Разно SL Razno SK Rôzne FI Useita SV Flera EN Various IS Ýmis NO Diverse TR Çeșitli |
Various – 99211 |
|
BG Насипно CS Volně loženo DA Bulk DE Lose EE Pakendamata EL Χύμα ES A granel FR Vrac HR Rasuto IT Alla rinfusa LV Berams LT Nesupakuota HU Ömlesztett MK (1) Рефус MT Bil-kwantitá NL Los gestort PL Luzem PT A granel RO Vrac RS Расуто SL Razsuto SK Voľne ložené FI Irtotavaraa SV Bulk EN Bulk IS Vara í lausu NO Bulk TR Dökme |
Bulk – 99212 |
|
BG Изпращач CS Odesílatel DA Afsender DE Versender EE Saatja EL Αποστολέας ES Expedidor FR Expéditeur HR Pošiljatelj IT Speditore LV Nosūtītājs LT Siuntėjas HU Feladó MK (1) Испраќач MT Min jikkonsenja NL Afzender PL Nadawca PT Expedidor RO Expeditor RS Пошиљалац SL Pošiljatelj SK Odosielateľ FI Lähettäjä SV Avsändare EN Consignor IS Sendandi NO Avsender TR Gönderici |
Consignor – 99213 |
|
(1)
Provisional code that does not affect the definitive denomination of the country to be attributed after the conclusion of the negotiations currently taking place in the United Nations. |
|
ANNEX A3a
TRANSIT ACCOMPANYING DOCUMENT
This Annex shall apply as of the dates of deployment of the upgrading of the NCTS referred to in the Annex to Implementing Decision (EU) 2016/578.
Specimen of Transit Accompanying Document
ANNEX A4a
NOTES AND PARTICULARS (DATA) FOR THE TRANSIT ACCOMPANYING DOCUMENT
This Annex shall apply as of the dates of deployment of the upgrading of the NCTS referred to in the Annex to Implementing Decision (EU) 2016/578.
The acronym ‘BCP’ (‘Business continuity plan’) used in this Annex refers to situations in which the business continuity procedure defined in Article 26 of Appendix I.
The paper to be used for the Transit Accompanying Document may be of green colour.
The transit accompanying document shall be printed on the basis of the data derived from the transit declaration, where appropriate, amended by the holder of the transit procedure and/or verified by the customs office of departure, and completed as follows:
1. Box MRN
The MRN is to be printed on the first page and on all lists of items except where these forms are used in the context of the BCP in which cases no MRN is allocated.
The ‘MRN’ shall also be printed in bar code mode using the standard ‘code 128 ’, character set ‘B’.
2. Box Forms (1/4):
3. In the space under box Reference number/UCR (2/4):
Name and address of the customs office to which a copy of the transit accompanying document has to be returned where BCP is used.
4. Box Office of departure (C):
5. Box Control by office of departure (D):
The transit accompanying document shall not be modified, nor shall any addition or deletion be made thereto unless otherwise specified in the Convention.
6. Formalities during incidents during movement of goods.
The following procedure is applicable until NCTS allows the customs authorities to record this information directly into the system.
Between the time when the goods leave the customs office of departure and the time they arrive at the customs office of destination, certain details may have to be added on the transit accompanying document accompanying the goods. Those details relate to the transport operation and shall be entered by the carrier responsible for the means of transport on which the goods are loaded as and when the corresponding activities are carried out. The particulars may be added legibly by hand, in which case the entries should be made in ink and in block letters.
Carriers are reminded that goods may be transhipped only under an authorisation of the customs authorities of the country in whose territory the transhipment is to be made.
Where those authorities consider that the common transit operation concerned may continue in the normal way, they shall, once they have taken any steps that may be necessary endorse the transit accompanying documents.
The customs authorities at the customs office of transit or at the customs office of destination, as the case may be, have the obligation to incorporate into the system the added data on the transit accompanying document. The data may also be incorporated by the authorised consignee.
The boxes and activities involved are:
Box Transhipment (7/1)
The carrier shall complete the first three lines of this box when goods are transhipped from one means of transport to another or from one container to another in the course of the operation in question.
However, where goods are carried in containers that are to be transported by road vehicles, customs authorities may authorise the holder of the transit procedure to leave box 7/7-/7/8 blank where the logistical pattern at the point of departure may prevent the identity and nationality of the means of transport from being provided at the time of establishment of the transit declaration, and where they are able to ensure that the proper information concerning the means of transport shall be subsequently entered in box 7/1.
Box Other incidents during carriage (7/19)
Box to be completed in accordance with current obligations regarding transit.
In addition, where goods have been loaded on a semi-trailer and the tractor is changed during the journey (without the goods being handled or transhipped), enter in this box the registration number and nationality of the new tractor. In this case, endorsement by the competent authorities is not necessary.
ANNEX A5a
LIST OF ITEMS
This Annex shall apply as of the dates of deployment of the upgrading of the NCTS referred to in the Annex to Implementing Decision (EU) 2016/578.
Specimen of the list of items
ANNEX A6a
NOTES AND THE PARTICULARS (DATA) FOR THE LIST OF ITEMS
This Annex shall apply as of the dates of deployment of the upgrading of the NCTS referred to in the Annex to Implementing Decision (EU) 2016/578.
The acronym ‘BCP’ (‘Business continuity plan’) used in this Annex refers to situations in which the business continuity procedure defined in the Article 26 of Appendix I.
The boxes of the list of items are vertically expandable. In addition to the provisions in the explanatory notes of Annexes A1a and B6a, data has to be printed as follows, if appropriate using codes:
Box MRN – as defined in Annex A3a. The MRN is to be printed on the first page and on all lists of items except where these forms are used in the context of the BCP in which cases no MRN is allocated.
The data of the different boxes at item level have to be printed as follows:
Box Decl.type (1/3) – if the status of the goods for the whole declaration is uniform, the box is not used; if mixed consignment, the actual status, T1, T2 or T2F, is printed.
Box Forms (1/4):
Box Item No (1/6) — serial number of the current item;
Box TCMPc (4/2) — enter transport charges method of payment code.
ANNEX B2a
This Annex shall apply as of the date of deployment of the PoUS system referred to in the Annex to Implementing Decision (EU) 2016/578.
Common data requirements FOR T2L/T2LF as a proof of the customs status of Union goods
TITLE I
GENERAL
|
1. |
The data elements which are to be provided for T2L/T2LF as a proof of the customs status of Union goods are set out in the data requirements table. The specific provisions concerning each data element as they are described in Title I of Appendix II apply without prejudice to the status of the data elements as defined in the data requirements table. |
|
2. |
The ‘A’, ‘B’ or ‘C’ symbols in the table below have no bearing on the fact that certain data is collected only where circumstances warrant it. They may be complemented by conditions or clarifications listed in the notes attached to the data requirements. |
|
3. |
The formats, codes and, if applicable, the structure of the data requirements described in this Annex are specified Annex B3a. |
TITLE II
SYMBOLS
Symbols in the cells
|
Symbol |
Symbol description |
|
A |
Mandatory: data required by every country |
|
B |
Optional for the countries: data that the countries may decide to waive. |
|
C |
Optional for declarants: data which declarants may decide to supply but which cannot be demanded by the countries |
|
X |
Data element required at the item level of a proof of the customs status of Union goods. The information entered at the item level of goods is valid only for the items of goods concerned. |
|
Y |
Data element required at the header level of a proof of the customs status of Union goods. The information entered at the header level is valid for all declared item of goods. |
Any combination of the symbols ‘X’ and ‘Y’ means that the given data element may be provided by the declarant at any of the levels concerned.
TITLE III
SECTION I
Data requirements table
(The notes to this table are included in brackets)
Group 1 – Message information (including procedural codes)
|
D.E. No |
Box No |
D.E name |
T2L/T2LF |
|
1/3 |
1/3 |
Proof of customs status type |
A XY |
|
1/4 |
3 |
Forms |
B (1) (2) Y |
|
1/5 |
4 |
Loading lists |
B (1) Y |
|
1/6 |
32 |
Goods item number |
A (2) X |
|
1/8 |
54 |
Signature/authentication |
A Y |
|
1/9 |
5 |
Total number of items |
B (1) Y |
Group 2 – References of messages, documents, certificates, authorisations
|
D.E. No |
Box No |
D.E. Name |
T2L/T2LF |
|
2/1 |
40 |
Simplified declaration/Previous documents |
A XY |
|
2/2 |
44 |
Additional information |
A XY |
|
2/3 |
44 |
Documents produced certificates and authorisations. Additional references |
A (7) XY |
|
2/5 |
|
LRN |
A Y |
Group 3 – Parties
|
D.E. No |
Box No |
D.E. Name |
T2L/T2LF |
|
3/1 |
2 |
Exporter |
A (13) (51) XY |
|
3/2 |
2 (no) |
Exporter identification no |
A (52) XY |
|
3/20 |
14 (no) |
Representative identification no |
A Y |
|
3/21 |
14 |
Representative status code |
A Y |
|
3/43 |
|
Person requesting a proof of the customs status of Union goods identification no |
A Y |
Group 5 – Dates/Times/Periods/Places/Countries/Regions
|
D.E. No |
Box No |
D.E. Name |
T2L/T2LF |
|
5/4 |
50, 54 |
Declaration date |
B (1) Y |
|
5/5 |
50, 54 |
Declaration place |
B (1) Y |
|
5/28 |
|
Requested validity of the proof |
A Y |
Group 6 – Goods identification
|
D.E. No |
Box No |
D.E. Name |
T2L/T2LF |
|
6/1 |
38 |
Net mass (kg) |
A (23) X |
|
6/5 |
35 |
Gross mass (kg) |
A XY |
|
6/8 |
31 |
Description of goods |
A X |
|
6/9 |
31 |
Type of packages |
A X |
|
6/10 |
31 |
Number of packages |
A X |
|
6/11 |
31 |
Shipping marks |
A X |
|
6/14 |
33(1) |
Commodity Code — Combined Nomenclature Code |
A (23) X |
|
6/18 |
6 |
Total packages |
B Y |
Group 7 – Transport information (modes, means and equipment)
|
D.E. No |
Box No |
D.E. Name |
T2L/T2LF |
|
7/2 |
19 |
Container |
A Y |
|
7/10 |
31 |
Container identification number |
A XY |
SECTION II
Notes
|
Note number |
Note description |
|
(1) |
Countries may require this data element only in the context of paper-based procedure |
|
(2) |
When the paper-based declaration covers only one item of goods, countries may provide for this box to be left empty, the figure ‘1’ having been entered in box 5. |
|
(7) |
Countries may waive this obligation if their systems allow them to deduce this information automatically and unambiguously from information elsewhere in the declaration. |
|
(13) |
For the Member States of the European Union – this information is mandatory only in the cases the EORI number in the Union or a third country unique identification number recognised by the Union is not provided. Where the EORI number in the Union or a third country unique identification number is provided, the name and address shall not be provided unless a paper-based declaration is used. |
|
(23) |
For completion only where common transit countries legislation so provides |
|
(51) |
For common transit countries – this information is mandatory. |
|
(52) |
For common transit countries – this information is mandatory. The EORI number in the Union and the trader identification number in a common transit country shall be provided. If the EORI number has not been granted, only the trader identification number in a common transit country shall be provided. |
TITLE IV
NOTES IN RELATION WITH DATA REQUIREMENTS
SECTION I
Introduction
The descriptions and notes contained in this title apply to the data elements referred to in the data requirements table in Title III, Chapter 3, Section I of this Annex.
SECTION II
Data requirements
1/3. Proof of customs status type
Enter the relevant code.
1/4. Forms
Enter the number of the subset in relation to the total number of subsets of forms and continuation forms used. For example, if there is one form and two continuation sheets, enter ‘1/3’ on the form, ‘2/3’ on the first continuation sheet and ‘3/3’ on the second continuation sheet.
Where the proof of status is made up from two sets of four copies instead of one set of eight copies, the two sets are to be treated as one for the purpose of establishing the number of forms.
1/5. Loading lists
Enter in figures the number of any loading lists attached, or of commercial descriptive lists, where these are authorised by the competent authority.
1/6. Goods item number
Number of the item in relation to the total number of items contained in the proof of the customs status of Union goods, where there is more than one item of goods.
1/8. Signature/Authentication
Signature or authentication otherwise of proof of the customs status of Union goods.
1/9. Total number of items
Total number of items of goods declared in the proof of the customs status of Union goods concerned. The item of goods is defined as the goods within a proof of the customs status of Union goods which have in common all the data with the attribute ‘X’ in the data requirements table in Title III, Chapter 3, Section I of this Annex.
2/1. Simplified declaration/Previous documents
If applicable, enter the reference of the customs declaration on the basis of which the proof of the customs status of Union goods is issued.
Where the MRN of the customs declaration for release for free circulation is provided and the proof of the customs status of Union goods does not concern all items of goods of the customs declaration, enter the respective item numbers in the customs declaration.
2/2. Additional information
Enter the relevant code.
2/3. Documents produced, certificates and authorisations, additional references
Identification or reference number of Union or international documents, certificates and authorisations produced in support of the proof of status, and additional references.
Using the relevant codes, enter the details required by any specific rules applicable together with reference data of the documents produced in support of the proof of status, and additional references.
Identification or reference number of national documents, certificates and authorisations produced in support of the proof of status, and additional references.
If applicable, enter the authorisation number of the authorised issuer.
2/5. LRN
The local reference number (LRN) shall be used. It is nationally defined and allocated by the declarant in agreement with the competent authorities to identify each single proof of status.
3/1. Exporter
Enter the full name and address of the person concerned.
3/2. Exporter Identification No
For the Member States of the European Union – enter the EORI number.
For common transit countries – enter the EORI number in the Union and the trader identification number in a common transit country. If the EORI number has not been granted, only the trader identification number in a common transit country shall be provided.
3/20. Representative identification No
This information shall be required if different from D.E. 3/43 (Person requesting a proof of the customs status of Union goods identification No).
For the Member States of the European Union – enter the EORI number.
For common transit countries – enter the EORI number in the Union and the trader identification number in the common transit country. If the EORI number has not been granted, only the trader identification number in the common transit country shall be provided.
3/21. Representative status code
Enter the relevant code representing the status of the representative.
3/43. Person requesting a proof of the customs status of Union goods identification No
For the member States of the European Union – enter the EORI number.
For common transit countries – enter the EORI number in the Union and the trader identification number in the common transit country. If the EORI number has not been granted, only the trader identification number in a common transit country shall be provided.
5/4. Declaration date
Date at which the respective proof of status was issued and, when appropriate, signed or otherwise authenticated.
5/5. Declaration place
Place at which the respective proof of status was issued.
5/28. Requested validity of the proof
Indicate the requested validity of the proof of the customs status of Union goods expressed in days.
6/1. Net mass (kg)
Enter the net mass, expressed in kilograms, for each item of the goods. The net mass is the mass of the goods without any packaging.
Where a net mass greater than 1 kg includes a fraction of a unit (kg), it may be rounded off in the following manner:
A net mass of less than 1 kg should be entered as ‘0’, followed by a number of decimals up to 6, discarding all ‘0’ at the end of the quantity (e.g. 0,123 for a package of 123 grams, 0,00304 for a package of 3 grams and 40 milligrams or 0,000654 for a package of 654 milligrams).
6/5. Gross mass (kg)
The gross mass is the weight of goods, including packaging but excluding the carrier's equipment.
Where a gross mass greater than 1 kg includes a fraction of a unit (kg), it may be rounded off in the following manner:
A gross mass of less than 1 kg should be entered as ‘0’, followed by a number of decimals up to 6, discarding all ‘0’ at the end of the quantity (e.g. 0,123 for a package of 123 grams, 0,00304 for a package of 3 grams and 40 milligrams or 0,000654 for a package of 654 milligrams).
Where possible, the economic operator may provide that weight at goods item level.
6/8. Description of goods
Enter the normal trade description. Where the commodity code is to be provided, the description must be precise enough to allow the goods to be classified.
6/9. Type of packages
Enter the code specifying the type of package.
6/10. Number of packages
Total number of packages based on the smallest external packing unit. This is the number of individual items packaged in such a way that they cannot be divided without first undoing the packing, or the number of pieces, if unpackaged.
This information shall not be provided where goods are in bulk.
6/11. Shipping marks
Free form of description of the marks and numbers on transport units or packages.
6/14. Commodity code — Combined Nomenclature code
Enter the commodity code made up of at least the six digits of the Harmonised Commodity Description and Coding System. The commodity code may be expanded to eight digits for national use.
7/2. Container
Enter the presumed situation when crossing the frontier of the Contracting Party, based on the information available at the time of the submission of the request for the proof, using the relevant code.
7/10. Container identification number
Marks (letters and/or numbers) which identify the transport container.
For modes of transport other than air, a container is a special box to carry freight, strengthened and stackable and allowing horizontal or vertical transfers.
In the air mode, containers are special boxes to carry freight, strengthened and allowing horizontal or vertical transfers.
In the context of this data element, the swap bodies and semi-trailers used for road and rail transport shall be considered as containers.
If applicable, for containers covered by the standard ISO 6346, the identifier (prefix) allocated by the International Bureau of Containers and Intermodal Transport (BIC) shall also be provided in addition to the container identification number.
For swap bodies and semi-trailers the ILU (Intermodal Loading Units) code as introduced by the European EN 13044 standard shall be used.
ANNEX B3a
This Annex shall apply as of the date of deployment of the PoUS system referred to in the Annex to Implementing Decision (EU) 2016/578.
Formats and codes of the common data requirements for T2L/T2LF as a proof of the customs status of Union goods
TITLE I
GENERAL
|
1. |
The formats, codes and, if applicable, the structure of the data elements included in this Annex are applicable in relation to the data requirements for the proof of the customs status of Union goods, specified in Title III of Annex B2a. |
|
2. |
The formats, codes and, if applicable, the structure of the data elements defined in this Annex shall apply to the paper-based proof of the customs status of Union goods. |
|
3. |
Title II of this Annex includes the formats of the data elements. |
|
4. |
Whenever the information in a proof of the customs status of Union goods dealt with in Title III of Annex B2a takes the form of codes, the code-list provided for in Title III of this Annex shall be applied. |
|
5. |
The term ‘type/length’ in the explanation of an attribute indicates the requirements for the data type and the data length. The codes for the data types are as follows:
The number following the code indicates the admissible data length. The following applies. The optional two dots before the length indicator mean that the data have no fixed length, but can have up to a number of digits, as specified by the length indicator. A comma in the data length means that the attribute can hold decimals, the digit before the comma indicates the total length of the attribute, the digit after the comma indicates the maximum number of digits after the decimal point. Examples of field lengths and formats:
|
|
6. |
The cardinality at header level included in the table in Title II of this Annex indicates how many times the data element may be used at header level within a proof of the customs status of Union goods. |
|
7. |
The cardinality at item level included in the table in Title II of this Annex indicates how many times the data element may be repeated in relation to the item in the proof of the customs status of Union goods concerned. |
TITLE II
FORMATS AND CARDINALITY OF THE COMMON DATA REQUIREMENTS FOR THE PROOF OF THE CUSTOMS STATUS OF UNION GOODS
|
D.E. order number |
D.E. name |
D.E. format (Type/length) |
Code-list in Title III (Y/N) |
Header level cardinality |
Item level cardinality |
Notes |
|
1/3 |
Proof of customs status type |
an..5 |
Y |
1x |
1x |
|
|
1/4 |
Forms |
n..4 |
N |
1x |
|
|
|
1/5 |
Loading lists |
n..5 |
N |
1x |
|
|
|
1/6 |
Goods item number |
n..5 |
N |
|
1x |
|
|
1/8 |
Signature/authentication |
an..35 |
N |
1x |
|
|
|
1/9 |
Total number of items |
n..5 |
N |
1x |
|
|
|
2/1 |
Simplified declaration/Previous documents |
Document category: a1 + Previous document type: an..3 + Previous document reference: an..35 + Goods item identifier: n..5 |
Y |
9999x |
99x |
|
|
2/2 |
Additional information |
Coded version (Union codes): n1 + an4 OR (national codes): a1 +an4 OR Free text description: an..512 |
Y |
|
99x |
The codes are further specified in Title III |
|
2/3 |
Documents produced, certificates and authorisations, additional references |
Document type (Union codes): a1 + an3 OR (national codes): n1 + an3 + Document identifier: an..35 |
Y |
1x |
99x |
|
|
2/5 |
LRN |
an..22 |
N |
1x |
|
|
|
3/1 |
Exporter |
Name: an..70 + Street and number: an..70 + Country: a2 + Postcode: an..9 + City: an..35 |
N |
1x |
1x |
Country code: the alphabetic codes for countries and territories are based on the current ISO alpha 2 codes (a2) in so far as they are compatible with the requirements of Commission Regulation (EU) No 1106/2012 (1). The Commission regularly publishes regulations updating the list of country codes. |
|
In the case of groupage consignments, where paper-based proof is used, code ‘00200 ’ may be used together with a list of exporters in accordance with the notes described for D.E. 3/1 Exporter in Title III of Annex B2a of Appendix II. |
||||||
|
3/2 |
Exporter identification No |
an..17 |
N |
1x |
1x |
|
|
3/20 |
Representative identification No |
an..17 |
N |
1x |
|
|
|
3/21 |
Representative status code |
n1 |
Y |
1x |
|
|
|
3/43 |
Person requesting a proof of the customs status of Union goods identification No |
an..17 |
N |
1x |
|
|
|
5/4 |
Declaration date |
n8 (yyyymmdd) |
N |
1x |
|
|
|
5/5 |
Declaration place |
an..35 |
N |
1x |
|
|
|
5/28 |
Requested period of validity of the proof |
n..3 |
N |
1x |
|
|
|
6/1 |
Net mass (kg) |
n..16,6 |
N |
|
1x |
|
|
6/5 |
Gross mass (kg) |
n..16,6 |
N |
1x |
1x |
|
|
6/8 |
Description of goods |
an..512 |
N |
|
1x |
|
|
6/9 |
Type of packages |
an..2 |
N |
|
99x |
The code-list corresponds to the latest version of UN/ECE Recommendations 21 |
|
6/10 |
Number of packages |
n..8 |
N |
|
99x |
|
|
6/11 |
Shipping marks |
an..512 |
N |
|
99x |
|
|
6/14 |
Commodity code — Combined nomenclature code |
an..8 |
N |
|
1x |
|
|
6/18 |
Total packages |
n..8 |
N |
1x |
|
|
|
7/2 |
Container |
n1 |
Y |
1x |
|
|
|
7/10 |
Container identification number |
an..17 |
N |
9999x |
9999x |
|
|
(1)
Commission Regulation (EU) No 1106/2012 of 27 November 2012 implementing Regulation (EC) No 471/2009 of the European Parliament and of the Council on Community statistics relating to external trade with non-member countries, as regards the update of the nomenclature of countries and territories (OJ L 328, 28.11.2012, p. 7). |
||||||
TITLE III
CODES IN RELATION WITH THE COMMON DATA REQUIREMENTS FOR THE PROOF OF THE CUSTOMS STATUS OF UNION GOODS
This Title contains the codes to be used on standard paper-based proofs of the customs status of Union goods.
1/3. Proof of customs status type
Codes to be used in the context of T2L documents
|
T2L |
Proof establishing the customs status of Union goods |
|
T2LF |
Proof establishing the customs status of Union goods consigned to, from or between special fiscal territories. |
|
T2LSM |
Proof establishing the status of goods destined for San Marino in application of Article 2 of Decision No 4/92 of the EEC-San Marino Cooperation Committee of 22 December 1992. |
2/1. Simplified declaration/Previous documents
This data element consists of alphanumeric codes.
Each code has three components. The first component (an..3), which consists of a combination of digits and/or letters, serves to identify the type of document. The second component (an..35) represents the data needed to recognise that document, either its identification number or another recognisable reference. The third component (an..5) is used to identify which item of the previous document is being referred to.
Where a paper-based customs declaration is lodged, the three components are separated by dashes (-).
1. The first component (an..3):
Choose the abbreviation for the document from the ‘list of abbreviations for documents’ below.
List of abbreviations for documents
(numeric codes extracted from the 2014b UN Directories for electronic data interchange for administration, commerce and transport: List of code for data element 1001, Document/message name, coded.)
|
Container list |
235 |
|
Delivery note |
270 |
|
Packing list |
271 |
|
Pro forma invoice |
325 |
|
Temporary storage declaration |
337 |
|
Entry summary declaration |
355 |
|
Commercial invoice |
380 |
|
House waybill |
703 |
|
Master bill of lading |
704 |
|
Bill of lading |
705 |
|
House bill of lading |
714 |
|
Rail consignment note |
720 |
|
Road consignment note |
730 |
|
Air waybill |
740 |
|
Master air waybill |
741 |
|
Despatch note (post parcels) |
750 |
|
Multimodal/combined transport document |
760 |
|
Cargo manifest |
785 |
|
Bordereau |
787 |
|
Transit declaration – mixed consignments (T) |
820 |
|
Transit declaration (T1) |
821 |
|
Transit declaration (T2) |
822 |
|
Transit declaration (T2F) |
T2F |
|
Proof of the customs status of Union goods T2L |
825 |
|
Proof of the customs status of Union goods T2LF |
T2G |
|
TIR carnet |
952 |
|
ATA carnet |
955 |
|
Reference/date of entry in the declarant's records |
CLE |
|
Information sheet INF3 |
IF3 |
|
Simplified declaration |
SDE |
|
Declaration MRN |
MRN |
|
Cargo manifest simplified procedure |
MNS |
|
Other |
ZZZ |
2. The second component (an..35):
The identification number or another recognisable reference of the document is inserted here.
3. The third component (an..5):
The item number of the goods concerned as provided in D.E. 1/6. Goods item number on the previous document.
2/2. Additional information
A five-digit code is used to encode additional information of a customs nature. This code follows the additional information unless the Contracting Parties law provides for the code to be used in place of the text.
|
Legal basis |
Subject |
Additional information |
Code |
|
Annex B2a, Title III |
Several occurrences of documents and parties |
‘Various’ |
00200 |
|
Annex B2a, Title III |
Identity between declarant and consignor |
‘Consignor’ |
00300 |
|
Annex B2a, Title III |
Identity between declarant and exporter |
‘Exporter’ |
00400 |
|
Annex B2a, Title III |
Identity between declarant and consignee |
‘Consignee’ |
00500 |
|
Annex B2a, Title III |
Request for a longer period of validity of the proof of the customs status of Union goods |
‘Longer period of validity of the proof of the customs status of Union goods’ |
40100 |
2/3. Documents produced, certificates and authorisations, additional references
Contracting Parties' or international documents, certificates and authorisations produced in support of the proof of the customs status of Union goods, and additional references shall be entered in the form of a code defined in Title II, followed either by an identification number or another recognisable reference. The list of documents, certificates and authorisations, and of additional references and their respective codes can be found in the TARIC database.
National documents, certificates and authorisations produced in support of the proof of the customs status of Union goods, and additional references shall be entered in the form of a code as defined in Title II, possibly followed either by an identification number or another recognisable reference. The four characters represent codes based on that country's own nomenclature.
3/2. Representative status code
Insert one of the following codes (n1) before the full name and address to designate the status of the representative:
|
2. |
Representative — direct representation (the customs representative acts in the name of and on behalf of another person) |
|
3. |
Representative — indirect representation (the customs representative acts in his or her own name, but on behalf of another person) |
Where this data element is printed on a paper document, it will be in square brackets (Ex: [2] or [3]).
7/2. Container
|
0. |
Goods not transported in containers |
|
1. |
Goods transported in containers. |
ANNEX B5a
EXPLANATORY NOTE ON THE LOADING LIST
Unless otherwise specified, this Annex shall apply as of the dates of deployment of the upgrading of the NCTS referred to in the Annex to Implementing Decision (EU) 2016/578.
TITLE I
GENERAL
1. Definition
The loading list referred to in Article 7 of Appendix III means a document having the characteristics described in this Annex.
2. Loading list form
|
2.1. |
Only the front of the form may be used as a loading list. |
|
2.2. |
The features of a loading list are:
(a)
the heading ‘Loading List’;
(b)
a 70 by 55 millimetre box divided into an upper part of 70 by 15 millimetres and a lower part of 70 by 40 millimetres;
(c)
columns with the following headings in the following order:
—
serial number,
—
marks, numbers, number and kind of packages, description of goods,
—
country of dispatch/export,
—
gross mass in kilograms,
—
reserved for the administration.
Users may adjust the width of the columns to their needs. However, the column headed ‘reserved for the administration’ must always be at least 30 millimetres wide. Users may also decide for themselves how to use the spaces other than those referred to in points (a), (b) and (c). |
|
2.3. |
A horizontal line must be drawn immediately under the last entry, and any spaces not used must be scored through to prevent later additions. |
TITLE II
PARTICULARS TO BE ENTERED IN THE DIFFERENT HEADINGS
1. Box
1.1. Upper part
Where a loading list accompanies a transit declaration, the holder of the transit procedure shall enter ‘T1’, ‘T2’ or ‘T2F’ in the upper part of the box.
Where a loading list accompanies a T2L document, the person concerned must enter ‘T2L’ or ‘T2LF’ in the upper part of the box.
1.2. Bottom part
The particulars listed in paragraph 4 of Title III below must be entered in this part of the box.
2. Columns
2.1. Serial number
Every item shown on the loading list must be preceded by a serial number.
2.2. Marks, numbers, number and kind of packages, description of goods
Where a loading list accompanies a transit declaration, the particulars must be entered in accordance with Annexes B1 and B6a to Appendix III. The list must include the information entered in boxes 31 (Packages and description de goods), 44 (Additional information, documents produced, certificates and authorisations) and, where appropriate, 33 (Commodity code) and 38 (Net mass) of the transit declaration.
Where a loading list accompanies a T2L document, the particulars must be entered in accordance with Annex B2a to Appendix III.
2.3. Country of dispatch/export
Enter the name of the country from which the goods are being consigned or exported. Do not use this column where a loading list accompanies a T2L document.
2.4. Gross mass (kg)
Enter the details entered in box 35 of the SAD (see Annexes B2a and B6a to this Appendix).
TITLE III
USE OF LOADING LISTS
|
1. |
A transit declaration may not have both a loading list and one or more continuation sheets attached to it. |
|
2. |
Where a loading list is used, boxes 15 (Country of dispatch/export), 32 (Goods item number), 33 (Commodity code), 35 (Gross mass (kg)) and, where appropriate, 44 (Additional information, documents produced, certificates and authorisations) of the transit declaration form must be struck through and box 31 (Packages and description of goods) may not be used to enter the marks, numbers, number and kind of packages or description of goods. A reference to the serial number and the symbol of the different loading lists shall be entered in box 31 (Packages and description of goods) of the transit declaration form used. |
|
3. |
The loading list must be produced in the same number of copies as the copies of a transit declaration to which it relates. |
|
4. |
When a transit declaration is registered, the loading list must be given the same registration number as the forms of the transit declaration to which it relates. This number must be entered by using a stamp which includes the name of the customs office of departure, or by hand. If entered by hand, it shall be endorsed by the official stamp of the customs office of departure. It is not obligatory for an official of the customs office of departure to sign the forms. |
|
5. |
Where several loading lists are attached to one form used for the purpose of a T1 or T2 procedure, the lists must bear a serial number allocated by the holder of the transit procedure, and the number of loading lists attached must be entered in box 4 (Loading lists) of the said form. |
|
6. |
The provisions of paragraphs 1 to 5 apply, as appropriate, where a loading list is attached to a T2L document. |
ANNEX B6a
COMMON DATA REQUIREMENTS FOR A TRANSIT DECLARATION
This Annex shall apply as of the dates of deployment of the upgrading of the NCTS referred to in the Annex to Implementing Decision (EU) 2016/578, with the exception of the provisions on data elements relating to an electronic transport document as a transit declaration as referred to in Article 55(1)(h) of Appendix I, which shall apply at the latest as of 1 May 2018.
TITLE I
GENERAL
|
1. |
The data elements which may be provided for each transit procedure are set out in the data requirements table. The specific provisions concerning each data element as they are described in Title III apply without prejudice to the status of the data elements as defined in the data requirements table. |
|
2. |
The data elements shall apply to transit declarations made by using an electronic data processing techniques as well as to paper-based declarations. |
|
3. |
There are three types of transit declaration: standard transit declarations, transit declarations with reduced data requirements, and Electronic Transport Documents as transit declarations. The provisions that apply to all situations where the data element concerned is requested are included under the heading ‘All types of transit declarations’. Where data requirements relate only to specific type or types of transit declaration, the appropriate heading is ‘Standard transit declaration’, ‘Standard transit declaration and transit declaration with reduced data requirements’ or ‘Electronic Transport Document as transit declaration’. |
|
4. |
The ‘A’, ‘B’ or ‘C’ symbols in the table below have no bearing on the fact that certain data is collected only where circumstances warrant it. They may be complemented by conditions or clarifications listed in the notes attached to the data requirements. |
|
5. |
The formats, codes and, if applicable, the structure of the data requirements described in this Annex are specified Annex A1a. |
TITLE II
SYMBOLS
Symbols in the cells
|
Symbol |
Symbol description |
|
A |
Mandatory: data required by every country |
|
B |
Optional for the countries: data that the countries may decide to waive. |
|
C |
Optional for declarants: data which declarants may decide to supply but which cannot be demanded by the countries |
|
X |
Data element required at the item level of the transit declaration. The information entered at the item level of goods is valid only for the items of goods concerned. |
|
Y |
Data element required at the header level of the transit declaration. The information entered at the header level is valid for all declared item of goods. |
Any combination of the symbols ‘X’ and ‘Y’ means that the given data element may be provided by the declarant at any of the levels concerned.
TITLE III
SECTION I
Data requirements table
(The notes to this table are included in brackets)
Group 1 – Message information (including procedural codes)
|
D.E. No |
D.E name |
Box No |
Standard transit declaration |
Transit declaration with reduced data requirements |
Electronic Transport Document as transit declaration |
|
1/2 |
Additional Declaration type |
1/2 |
A Y |
A Y |
|
|
1/3 |
Transit declaration type |
1/3 |
A XY |
A XY |
A XY |
|
1/4 |
Forms |
3 |
B (1) (2) Y |
B (1) (2) Y |
|
|
1/5 |
Loading lists |
4 |
B (1) Y |
B (1) Y |
|
|
1/6 |
Goods item number |
32 |
A (2) X |
A (2) X |
|
|
1/8 |
Signature/Authentication |
54 |
A Y |
A Y |
A Y |
|
1/9 |
Total number of items |
5 |
B (1) Y |
B (1) Y |
|
Group 2 – References of messages, documents, certificates, authorisations
|
D.E. No |
D.E name |
Box No |
Standard transit declaration |
Transit declaration with reduced data requirements |
Electronic Transport Document as transit declaration |
|
2/1 |
Simplified declaration/Previous documents |
40 |
A XY |
A XY |
A XY |
|
2/2 |
Additional information |
44 |
A XY |
A XY |
A X |
|
2/3 |
Documents produced certificates and authorisations. Additional references |
44 |
A (7) XY |
A (7) XY |
A X |
Group 3 – Parties
|
D.E. No |
D.E name |
Box No |
Standard transit declaration |
Transit declaration with reduced data requirements |
Electronic Transport Document as transit declaration |
|
3/1 |
Exporter |
2 |
B XY |
|
|
|
3/2 |
Exporter identification no |
2 (no) |
B XY |
|
|
|
3/9 |
Consignee |
8 |
A (12) (51) XY |
A (12) (51) XY |
A (12) (51) XY |
|
3/10 |
Consignee identification no |
8 (no) |
B XY |
B XY |
B XY |
|
3/19 |
Representative |
14 |
A (13) (51) Y |
A (13) Y |
A (13) Y |
|
3/20 |
Representative identification no |
14 (no) |
A (52) Y |
A (52) Y |
A (52) Y |
|
3/21 |
Representative status code |
14 |
A Y |
A Y |
A Y |
|
3/22 |
Holder of the transit procedure |
50 |
A (13) (51) Y |
A (13) Y |
A (13) Y |
|
3/23 |
Holder of the transit procedure identification no |
50 (no) |
A (52) Y |
A (52) Y |
A (52) Y |
|
3/37 |
Additional supply chain actor(s) identification no |
44 |
C XY |
C XY |
C XY |
Group 5 – Dates/Times/Periods/Places/Countries/Regions
|
D.E. No |
D.E name |
Box No |
Standard transit declaration |
Transit declaration with reduced data requirements |
Electronic Transport Document as transit declaration |
|
5/4 |
Declaration date |
50, 54 |
B (1) Y |
B (1) Y |
|
|
5/5 |
Declaration place |
50, 54 |
B (1) Y |
B (1) Y |
|
|
5/6 |
Office of destination (and country) |
53 |
A Y |
A Y |
A Y |
|
5/7 |
Intended offices of transit (and country) |
51 |
A Y |
A Y |
|
|
5/8 |
Country of destination code |
17a |
A XY |
A XY |
A XY |
|
5/21 |
Place of loading |
27 |
B Y |
B Y |
B Y |
|
5/23 |
Location of goods |
30 |
A Y (23) |
A Y (23) |
|
Group 6 – Goods identification
|
D.E. No |
D.E name |
Box No |
Standard transit declaration |
Transit declaration with reduced data requirements |
Electronic Transport Document as transit declaration |
|
6/1 |
Net mass (kg) |
38 |
A (23) X |
|
|
|
6/5 |
Gross mass (kg) |
35 |
A XY |
A XY |
A XY |
|
6/8 |
Description of goods |
31 |
A X |
A X |
A X |
|
6/9 |
Type of packages |
31 |
A X |
A X |
A X |
|
6/10 |
Number of packages |
31 |
A X |
A X |
A X |
|
6/11 |
Shipping marks |
31 |
A X |
A X |
A X |
|
6/13 |
CUS code |
31 |
C X |
C X |
C X |
|
6/14 |
Commodity code – Combined Nomenclature code |
33 |
A (37) X |
A (37) X |
A (37) X |
|
6/18 |
Total packages |
6 |
A Y |
A Y |
A Y |
Group 7 – Transport information (modes, means and equipment)
|
D.E. No |
D.E name |
Box No |
Standard transit declaration |
Transit declaration with reduced data requirements |
Electronic Transport Document as transit declaration |
|
7/1 |
Transhipment |
55 |
A (38) Y |
A (38) Y |
|
|
7/2 |
Container |
19 |
A Y |
A Y |
|
|
7/4 |
Mode of transport at the border |
25 |
A (39) Y |
A (39) Y |
|
|
7/5 |
Inland mode of transport |
26 |
B (40) Y |
|
|
|
7/7 |
Identity of means of transport at departure |
18(1) |
A (43) (44) (45) XY |
A (43) (44) (45) XY |
A XY |
|
7/8 |
Nationality of means of transport at departure |
18(2) |
A (46) (44) (45) XY |
|
|
|
7/10 |
Container identification number |
31 |
A XY |
A XY |
A XY |
|
7/14 |
Identity of active means of transport crossing the border |
21(1) |
B (46) XY |
|
|
|
7/15 |
Nationality of active means of transport crossing the border |
21(2) |
A (46) XY |
|
|
|
7/18 |
Seal number |
D |
A Y |
A Y |
A Y |
|
7/19 |
Other incidents during carriage |
56 |
A (38) Y |
A (38) Y |
|
Group 8 – Other data elements (statistical data, guarantees, tariff related data)
|
D.E. No |
D.E name |
Box No |
Standard transit declaration |
Transit declaration with reduced data requirements |
Electronic Transport Document as transit declaration |
|
8/2 |
Guarantee type |
52 |
A Y |
A Y |
|
|
8/3 |
Guarantee reference |
52 |
A Y |
A Y |
|
|
8/4 |
Guarantee not valid in |
52 |
A Y |
A Y |
|
SECTION II
Notes
|
Note number |
Note description |
|
(1) |
Countries may require this data element only in the context of paper-based procedure |
|
(2) |
When the paper-based declaration covers only one item of goods, countries may provide for this box to be left empty, the figure ‘1’ having been entered in box 5. |
|
(7) |
Countries may waive this obligation if their systems allow them to deduce this information automatically and unambiguously from information elsewhere in the declaration. |
|
(12) |
For the Member States of the European Union – this information is mandatory only in the cases the EORI number in the Union or a third country unique identification number recognised by the Union of the person concerned is not provided. Where the EORI number or a third country unique identification number recognised by the Union is provided, the name and address shall not be provided. |
|
(13) |
For the Member States of the European Union – this information is mandatory only in the cases the EORI number in the Union or a third country unique identification number recognised by the Union is not provided. Where the EORI number in the Union or a third country unique identification number numbers is provided, the name and address shall not be provided unless a paper-based declaration is used. |
|
(23) |
For completion only where Contracting Parties legislation so provides |
|
(37) |
This subdivision shall be completed where: — a transit declaration is made by the same person at the same time as, or following, a customs declaration which includes a commodity code, or — where Contracting Parties legislation so provides. |
|
(38) |
This information is provided only in respect with paper-based declarations. |
|
(39) |
Countries may waive this requirement for modes of transport other than rail. |
|
(40) |
This information shall not be provided when export formalities are carried out at the point of exit from the customs territory of the Contracting Parties. |
|
(43) |
Not for use in the case of carriage by fixed transport installations |
|
(44) |
Where goods are carried in multimodal transport units, such as containers, swap bodies and semi-trailers, the customs authorities may authorise the holder of the transit procedure not to provide this information where the logistical pattern at the point of departure may prevent the identity and nationality of the means of transport from being provided at the time the goods are released for transit, providing multimodal transport units bear unique numbers and such numbers are indicated in D.E. 7/10 Container identification number. |
|
(45) |
In the following cases, countries shall waive the obligation to enter this information on a transit declaration lodged at the customs office of departure in relation with the means of transport on which the goods are directly loaded: — where the logistical pattern does not allow this data element to be provided and the holder of the transit procedure has the AEOC status in the Union or a similar status in a common transit country, and — where the relevant information may be traced where needed by the customs authorities via the records of the holder of the transit procedure. |
|
(46) |
Not for use in the case of carriage by fixed transport installations or rail. |
|
(51) |
For common transit countries – this information is mandatory. |
|
(52) |
For common transit countries – this information is mandatory. The EORI number in the Union and the trader identification number in a common transit country shall be provided. If the EORI number has not been granted, only the trader identification number in a common transit country shall be provided. If a consignee is located in a third country this D.E. is not required. |
TITLE IV
NOTES IN RELATION WITH DATA REQUIREMENTS
SECTION I
Introduction
The descriptions and notes contained in this Title apply to the data elements referred to in the data requirements table in Title III, Section I of this Annex.
SECTION II
Data requirements
1/2. Additional Declaration type
Transit declaration and Transit declaration with reduced data requirements
Enter the relevant code
1/3. Transit Declaration
All types of transit declarations
Enter the relevant code.
1/4. Forms
All types of transit declarations
Where paper-based declarations are used, enter the number of the subset in relation to the total number of subsets of forms and continuation forms used. For example, if there is one form and two continuation sheets, enter ‘1/3’ on the form, ‘2/3’ on the first continuation sheet and ‘3/3’ on the second continuation sheet.
1/5. Loading lists
Transit declaration and Transit declaration with reduced data requirements
Where paper-based declaration is used, enter in figures the number of any loading lists attached, or of commercial descriptive lists where are authorised by the competent authority.
1/6. Goods item number
Transit declaration and Transit declaration with reduced data requirements
Number of the item in relation to the total number of items contained in the transit declaration, where there is more than one item of goods.
1/8. Signature/Authentication
All types of transit declarations
Signature or authentication otherwise of the transit declaration.
Where paper-based declaration is concerned, the original of the handwritten signature of the person concerned shall be given on the copy of the declaration which is to remain at the customs office of departure, followed by the full name of that person. Where that person is not a natural person, the signatory should add his capacity after his signature and full name.
1/9. Total number of items
Transit declaration and Transit declaration with reduced data requirements
Total number of items of goods declared in the transit declaration concerned. The item of goods is defined as the goods within a declaration which has in common all the data with the attribute ‘X’ in the data requirements table in Title III, Section I of this Annex.
2/1. Simplified declaration/Previous documents
All types of transit declarations
Give the reference for the temporary storage or the previous customs procedure or corresponding customs document.
Where, in the case of paper-based transit declaration, more than one reference has to be entered, the countries may provide that the relevant code be entered in this box and a list of the references concerned accompany the transit declaration.
2/2. Additional information
All types of transit declarations
Enter the relevant code.
2/3. Documents produced, certificates and authorisations, additional references
All types of transit declarations
Identification or reference number of Contracting Parties' or international documents, certificates and authorisations produced in support of the declaration, and additional references.
Using the relevant codes, enter the details required by any specific rules applicable together with reference data of the documents produced in support of the declaration, and additional references.
Electronic Transport Document as transit declaration
This data element includes the type and reference of the transport document that is used as transit declaration.
In addition, it also contains the reference to the respective authorisation number of the holder of the transit procedure. This information needs to be provided, unless it can be derived without ambiguity from other data elements, such as the EORI number of the holder of the authorisation.
3/1. Exporter
Transit declaration
Enter the full name and address of the consignor.
In the case of groupage consignments, where paper-based transit declaration is used, the countries may provide that the relevant code be used, and the list of consignors to be attached to the declaration.
3/2. Exporter identification number
Transit declaration
Enter the EORI number of the consignor or the trader identification number in a common transit country.
3/9. Consignee
All types of transit declarations
Enter the full name and address of the consignee.
Transit declaration and Transit declaration with reduced data requirements
In the case of groupage consignments, where paper-based transit declaration is used, the country may provide that the relevant code be entered in this box, and the list of consignees attached to the declaration.
3/10. Consignee identification number
All types of transit declarations
Enter the EORI number or the trader identification number in a common transit country.
3/19. Representative
All types of transit declarations
This information shall be required, if different from D.E. 3/17 Declarant or where appropriate D.E. 3/22 Holder of the transit procedure.
3/20. Representative identification number
All types of transit declarations
This information shall be required if different from D.E. 3/18 Declarant identification number or where appropriate D.E. 3/23 Holder of the transit procedure identification number.
Enter the EORI number of the person concerned or the trader identification number in a common transit country.
3/21. Representative status code
All types of transit declarations
Enter relevant code representing the status of the representative.
3/22. Holder of the transit procedure
All types of transit declarations
Enter the full name (person or company) and address of the holder of the transit procedure. Where appropriate, enter the full name (person or company) of the authorised representative lodging the transit declaration on behalf of the holder of the procedure.
Where paper-based transit declaration is used, the original of the handwritten signature of the person concerned must be given on the copy of the paper-based declaration which is to remain at the customs office of departure.
3/23. Holder of the transit procedure identification number
All types of transit declarations
Enter the EORI number of the holder of the transit procedure or the trader identification number in a common transit country.
3/37. Additional supply chain actor(s) identification No
All types of transit declarations
Unique identification number assigned to an economic operator of a third country in the framework of a trade partnership programme developed in accordance with the World Customs Organization Framework of Standards to Secure and Facilitate Global Trade which is recognised by the Union and other Contracting Parties.
The identifier of the party concerned shall be preceded by a role code specifying his role in the supply chain.
5/4. Declaration date
All types of transit declarations
Date at which the declaration was issued and, when appropriate, signed or otherwise authenticated.
5/5. Declaration place
All types of transit declarations
Place at which the paper-based declaration was issued.
5/6. Office of destination (and country)
All types of transit declarations
Using the relevant code, enter the reference number of the customs office where the transit operation shall end.
5/7. Intended offices of transit (and country)
All types of transit declarations
Enter the code for the intended customs office competent for the point of entry into the territory of a Contracting Party when the goods move under the transit procedure, or the customs office competent for the point of exit from the territory of a Contracting Party when the goods are leaving that territory in the course of a transit operation via a frontier between that Contracting Party and a third country.
Using the relevant code, enter the reference numbers of the customs offices concerned.
5/8. Country of destination code
All types of transit declarations
Using the relevant code, enter the last country of destination of the goods.
The country of last known destination is defined as the last country to which it is known at the time of release into the customs procedure that the goods are to be delivered.
5/21. Place of loading
All types of transit declarations
Using the relevant code, where required, enter the place, at which the goods are to be loaded onto the active means of transport on which they are to cross the frontier of the Contracting Party.
5/23. Location of goods
Transit declaration and Transit declaration with reduced data requirements
Using the relevant code, enter the location where the goods may be examined. This location shall be precise enough to allow the customs office to carry the physical control of the goods.
6/1. Net mass (kg)
Transit declaration
Enter the net mass, expressed in kilograms, of the goods concerned by the relevant declaration goods item. The net mass is the mass of the goods without any packaging.
Where a net mass greater than 1 kg includes a fraction of a unit (kg), it may be rounded off in the following manner:
A net mass of less than 1 kg should be entered as ‘0’, followed by a number of decimals up to 6, discarding all ‘0’ at the end of the quantity (e.g. 0,123 for a package of 123 grams, 0,00304 for a package of 3 grams and 40 milligrams or 0,000654 for a package of 654 milligrams).
6/5. Gross mass (kg)
All types of transit declarations
The gross mass is the weight of goods including packaging, but excluding the carrier's equipment for the declaration.
Where a gross mass greater than 1 kg includes a fraction of a unit (kg), it may be rounded off in the following manner:
A gross mass of less than 1 kg should be entered as ‘0’, followed by a number of decimals up to 6, discarding all ‘0’ at the end of the quantity (e.g. 0,123 for a package of 123 grams, 0,00304 for a package of 3 grams and 40 milligrams or. 0,000654 for a package of 654 milligrams).
Enter the gross mass, expressed in kilograms, of the goods concerned by the relevant item of goods.
Where the declaration comprises several goods items, which concern goods that are packed together in such a way that it is impossible to determine the gross mass of the goods pertaining to any goods item, the total gross mass needs only to be entered on header level.
Where a paper-based transit declaration covers several goods items, the total gross mass needs only be entered in the first box 35, the remaining boxes 35 being left blank.
6/8. Description of goods
All types of transit declarations
It is a plain language normal trade description of the goods that is precise enough for customs authorities to be able to identify the goods. Where the HS code is to be provided, the description must be precise enough to allow the goods to be classified.
6/13. CUS code
All types of transit declarations
The Customs Union and Statistics (CUS) number is the identifier assigned within the European Customs Inventory of Chemical Substances (ECICS) to mainly chemical substances and preparations.
The declarant may provide this code on a voluntary basis where no TARIC measure exists for the goods concerned, i.e. where providing this code would represent a lesser burden than a full textual description of the product.
6/14. Commodity code – Combined Nomenclature code
All types of transit declarations
The commodity code made up of at least the six digits of the Harmonised Commodity Description and Coding System shall be entered in this subdivision. The commodity code may be expanded to eight digits for national use
6/18. Total packages
All types of transit declarations
Enter in figures the total number of packages making up the consignment in question.
6/20. Packages
All types of transit declarations
Information on the type and total number of packages based on the smallest external packing unit. The total number of packages relates to the number of individual items packaged in such a way that they cannot be divided without first undoing the packing, or the number of pieces, if unpackaged.
Information on the total number of packages shall not be provided where goods are in bulk.
The information shall also contain the free form description of the marks and numbers of transport units or packages.
7/1. Transhipment
Transit declaration and Transit declaration with reduced data requirements
The first three lines of this box are to be completed by the carrier where, during the transit operation, the goods are transhipped from one means of transport to another or from one container to another.
7/2. Container
Transit declaration and Transit declaration with reduced data requirements
Enter the presumed situation when crossing the frontier of the Contracting Party, based on the information available at the time of completion of the transit formalities, using the relevant code.
7/4. Mode of transport at the border
Transit declaration and Transit declaration with reduced data requirements
Using the relevant code, enter the mode of transport corresponding to the active means of transport which it is expected will be used on exit from the customs territory of the Contracting Party.
7/5. Inland mode of transport
Transit declaration
Using the relevant code, enter the mode of transport upon arrival.
7/7. Identity of means of transport at departure
All types of transit declarations
Enter the identity of the means of transport on which the goods are directly loaded at the time of transit formalities (or that of the vehicle propelling the others if there are several means of transport). If a tractor and trailer with different registration numbers are used, enter the registration numbers of both the tractor and the trailer together with the nationality of the tractor.
Depending on the means of transport concerned, the following details concerning identity may be entered:
|
Means of transport |
Method of identification |
|
Inland waterway transport |
Name of vessel |
|
Air transport |
Number and date of flight (where there is no flight number, enter the aircraft's registration number) |
|
Road transport |
Vehicle registration number |
|
Rail transport |
Wagon number |
7/8. Nationality of means of transport at departure
Transit declaration
Enter the nationality of the means of transport (or that of the vehicle propelling the others if there are several means of transport) on which the goods are directly loaded at the time of transit formalities, in the form of the relevant code. If a tractor and trailer of different nationalities are used, enter the nationality of the tractor.
Where goods are transported by way of a trailer and a tractor, enter the nationality of both trailer and tractor. Where the nationality of the tractor is not known, enter the nationality of the trailer.
7/10. Container identification number
All types of transit declarations
Marks (letters and/or numbers) which identify the transport container.
For modes of transport other than air, a container is a special box to carry freight, strengthened and stackable and allowing horizontal or vertical transfers.
In the air mode, containers are special boxes to carry freight, strengthened and allowing horizontal or vertical transfers.
In the context of this data element, the swap bodies and semi-trailers used for road and rail transport shall be considered as containers.
If applicable, for containers covered by the standard ISO 6346, the identifier (prefix) allocated by the International Bureau of Containers and Intermodal Transport (BIC) shall also be provided in addition to the container identification number.
For swap bodies and semi-trailers the ILU (Intermodal Loading Units) code as introduced by the European EN 13044 standard shall be used.
7/14. Identity of active means of transport crossing the border
Transit declaration
Enter the identity of the active means of transport crossing the Contracting Party frontier.
In the case of combined transport or where several means of transport are used, the active means of transport is the one which propels the whole combination. For example, in the case of a lorry on a sea-going vessel, the active means of transport is the ship. In the case of a tractor and trailer, the active means of transport is the tractor.
Depending on the means of transport concerned, the following details concerning identity shall be entered:
|
Means of transport |
Method of identification |
|
Inland waterway |
Name of vessel |
|
Air transport |
Number and date of flight (where there is no flight number, enter the aircraft's registration number) |
|
Road transport |
Vehicle registration number |
|
Rail transport |
Wagon number |
7/15. Nationality of active means of transport crossing the border
Transit declaration
Using the relevant code, enter the nationality of the active means of transport crossing the Contracting Party frontier.
In the case of combined transport or where several means of transport are used, the active means of transport is the one which propels the whole combination. For example, in the case of a lorry on a sea-going vessel, the active means of transport is the ship. In the case of a tractor and trailer, the active means of transport is the tractor.
7/18. Seal number
All types of transit declarations
The information shall be provided, if an authorised consignor lodges a declaration for which his authorisation requires the use of seals of a special type or a holder of the transit procedure is authorised to use of seals of a special type.
7/19. Other incidents during carriage
Transit declaration and Transit declaration with reduced data requirements
Box to be completed in accordance with existing obligations under the common transit procedure.
In addition, where the goods were loaded on a semi-trailer and only the tractor vehicle is changed during the journey (without the goods being handled or transhipped), enter in this box the registration number of the new tractor. In such cases endorsement by the competent authorities is not necessary.
8/2. Guarantee type
Transit declaration and Transit declaration with reduced data requirements
Using the relevant codes, enter the type of guarantee used for the transit operation.
8/3. Guarantee reference
Transit declaration and Transit declaration with reduced data requirements
Enter the reference number of the guarantee and, if appropriate, the access code and the customs office of guarantee.
8/4. Guarantee not valid in
Transit declaration and Transit declaration with reduced data requirements
Where a guarantee is not valid for one or more Contracting Parties, after ‘Not valid’ add ‘for the relevant codes for the Contracting Party or Parties concerned’.
APPENDIX IV
MUTUAL ASSISTANCE FOR THE RECOVERY OF CLAIMS
Aim
Article 1
This Appendix lays down the rules of ensuring recovery in each country of the claims referred to in Article 3 which arise in another country. Implementing provisions are set out in Annex I to the Appendix.
Definitions
Article 2
In this Appendix:
Scope
Article 3
This Appendix shall apply to:
all claims relating to debts covered by ►M38 Article 3, point (1) ◄ of Appendix I due in connection with a common transit operation which began after the entry into force of this Appendix;
interest and costs incidental to the recovery of the claims referred to above.
Communication and use of information
Article 4
In order to obtain this information, the requested authority shall make use of the powers provided under the laws, regulations or administrative provisions applying to the recovery of similar claims arising in the country where that authority is situated.
The requested authority shall not be obliged to supply information:
which it would not be able to obtain for the purpose of recovering similar claims arising in the country in which it is situated;
which would disclose any commercial, industrial or professional secrets; or
the disclosure of which would be liable to prejudice the security of or be contrary to the public policy of the country.
The request for information shall be provided using the form set out in Annex II to this Appendix.
◄
Notification
Article 5
The request for notification shall be provided using the form set out in Annex III to this Appendix.
◄
Execution of requests
Article 6
Article 7
The applicant authority may not make a request for recovery unless:
the claim and/or the instrument permitting its enforcement are not contested in the country in which it is situated;
it has, in the country in which it is situated, applied the recovery procedure available to it on the basis of the instrument referred to in paragraph 1, and the measures taken have not resulted in the payment in full of the claim;
the claim exceeds EUR 1 500 . The equivalent in national currencies of the amount expressed in EUR shall be calculated in accordance with the provisions of Article 22 of Appendix II.
Article 8
The instrument permitting enforcement of the claim shall, where appropriate, and in accordance with the provisions in force in the country in which the requested authority is situated, be accepted, recognized, supplemented or replaced by an instrument authorizing enforcement in the territory of that country.
Such acceptance, recognition, supplementing or replacement must take place as soon as possible following the date of receipt of the request for recovery. They may not be refused if the instrument permitting enforcement in the country in which the applicant authority is situated is properly drawn up.
If any of these formalities should give rise to an examination or contestation in connection with the claim and/or the instrument permitting enforcement issued by the applicant authority, Article 12 shall apply.
Article 9
Any other interest charged for late payment under the laws, regulations and administrative provisions in force in the country in which the requested authority is situated shall also be remitted to the applicant authority.
Article 10
The claims to be recovered shall not be given preferential treatment in the country in which the requested authority is situated.
Article 11
The requested authority shall inform the applicant authority immediately of the action it has taken on the request for recovery.
Contested requests
Article 12
Precautionary measures
Article 13
The request for precautionary measures shall be provided using the form set out in Annex IV to this Appendix.
◄
Exceptions
Article 14
The requested authority shall not be obliged:
to grant the assistance provided for in Articles 6 to 13 if recovery of the claim would, because of the situation of the debtor, create serious economic or social difficulties in the country in which that authority is situated;
to accept a recovery of a claim if it maintains that it could infringe the public policy or other essential interests of the country in which that authority is situated.
to undertake recovery of a claim if the applicant authority has not exhausted the means of recovery in the territory of the country in which it is situated.
The requested authority shall inform the applicant authority of the grounds for refusing a request for assistance.
Article 15
Confidentiality
Article 16
Documents and information sent to the requested authority pursuant to this Appendix may only be communicated by the latter to:
the person mentioned in the request for assistance;
those persons and authorities responsible for the recovery of the claims, and solely for that purpose;
the judicial authorities dealing with matters concerning the recovery of the claims.
Languages
Article 17
Requests for assistance and relevant documents shall be accompanied by a translation in the official language, or one of the official languages of the country in which the requested authority is situated or in a language acceptable to such authority.
Assistance expenses
Article 18
The countries concerned shall renounce all claims upon each other for the reimbursement of costs resulting from mutual assistance which they grant each other pursuant to this Appendix.
However, the country in which the applicant authority is situated shall remain liable to the country in which the requested authority is situated for costs incurred as a result of actions held to be unfounded, as far as either the substance of the claim or the validity of the instrument issued by the applicant authority are concerned.
Authorized authorities
Article 19
The countries shall provide each other with a list of authorities authorized to make or receive requests for assistance, as well as any subsequent relevant changes.
Articles 20 to 22
(This Appendix contains no Articles 20 to 22.)
Complementarity
Article 23
The provisions of this Appendix shall not prevent a greater measure of mutual assistance being afforded either now or in the future by particular countries under any agreements or arrangements, including those for the notification of legal or extra-legal acts.
Articles 24 to 26
(This Appendix contains no Articles 24 to 26.)
ANNEX I TO APPENDIX IV
IMPLEMENTING PROVISIONS
TITLE I
Scope
Article 1
TITLE II
Request for information
Article 2
Article 3
The request for information may be related to
the debtor; or
any person liable for settlement of the claim under the law in force in the country where the applicant authority is situated.
Where the applicant authority knows that a third party holds assets belonging to one of the persons mentioned in the foregoing paragraph, the request may also relate to that third party.
Article 4
The requested authority shall acknowledge receipt of the request for information in writing (e.g. ►M38 by e-mail ◄ or fax) as soon as possible and in any event within seven days of such receipt.
Article 5
In any event, at the end of six months from the date of acknowledgement of receipt of the request, the requested authority shall inform the applicant authority of the outcome of the investigations which is has conducted in order to obtain the information requested.
In the light of the information received from the requested authority, the applicant authority may request the latter to continue its investigations. This request shall be made in writing (e.g. ►M38 by e-mail ◄ or fax) within two months from the receipt of the notification of the outcome of the investigations carried out by the requested authority, and shall be treated by the requested authority in accordance with the provisions applying to the initial request.
Article 6
When the requested authority decides not to comply with the request for information addressed to it, it shall notify the applicant authority in writing of the reasons for the refusal, specifying the particular provisions of Article 4 of Appendix IV which it invokes. This notification shall be made by the requested authority as soon as it has taken its decisions and in any event within six months from the date of the acknowledgement of the receipt of the request.
Article 7
The applicant authority may at any time withdraw the request for information which it has sent to the requested authority. The decision to withdraw shall be transmitted to the requested authority in writing (e.g. ►M38 by e-mail ◄ or fax).
TITLE III
Request for notification
Article 8
The request for notification referred to in Article 5 of Appendix IV shall be made out in writing in duplicate ►M38 using the form set out ◄ in Annex III. The said request shall bear the official stamp of the applicant authority and shall be signed by an official thereof duly authorized to make such a request.
Two copies of the instrument (or decision), notification of which is requested, shall be attached to the request referred to in the foregoing paragraph.
Article 9
The request for notification may relate to any natural or legal person who, in accordance with the law in force in the country where the applicant authority is situated, shall be informed of any instrument or decision which concerns him.
Article 10
TITLE IV
Request for recovery and/or for the taking of precautionary measures
Article 11
For the purposes of Articles 12 to 19, all claims which are covered by the same instrument permitting enforcement shall be deemed to constitute a single claim.
Article 12
the debtor; or
any person liable for settlement of the claim under the law in force in the country in which the applicant authority is situated.
Article 13
Article 14
The requested authority shall acknowledge receipt of the request for recovery and/or for the taking of precautionary measures in writing (e.g. ►M38 by e-mail ◄ or fax) as soon as possible and in any event within seven days of its receipt.
Article 15
Where, within a reasonable time having regard to the particular case, all or part of the claim cannot be recovered or precautionary measures cannot be taken, the requested authority shall so inform the applicant authority, indicating the reasons therefor.
In any event, at the end of one year from the date of acknowledgement of the receipt of the request, the requested authority shall inform the applicant authority of the outcome of the procedure which it has undertaken for recovery and/or for the taking of precautionary measures.
In the light of the information received from the requested authority, the applicant authority may request the latter to continue the procedure which it has undertaken for recovery and/or for the taking of precautionary measures. This request shall be made in writing (e.g. ►M38 by e-mail ◄ or fax) within two months from the receipt of the notification of the outcome of the procedure undertaken by the requested authority for recovery and/or for the taking of precautionary measures, and shall be treated by the requested authority in accordance with the provisions applying to the initial request.
Article 16
Any action contesting the claim or the instrument permitting its enforcement which is taken in the country in which the applicant authority is situated shall be notified to the requested authority in writing (e.g. ►M38 by e-mail ◄ or fax) by the applicant authority immediately after it has been informed of such action.
Article 17
If the amendment consists of a reduction in the amount of the claim, the requested authority shall continue the action which it has undertaken with a view to recovery and/or to the taking of precautionary measures, but that action shall be limited to the amount still outstanding if, at the time the requested authority is informed of the reduction of the amount of the claim, the original amount has already been recovered by it but the transfer procedure referred to in Article 18 has not yet been initiated, the requested authority shall repay the amount overpaid to the person entitled thereto.
If the amendment consists of an increase in the amount of the claim, the applicant authority shall as soon as possible address to the requested authority an additional request for recovery and/or for the taking of precautionary measures. This additional request shall, as far as possible, be dealt with by the requested authority at the same time as the original request of the applicant authority. Where, in view of the state of progress of the existing procedure, the joinder of the additional request and the original request is not possible, the requested authority shall only be required to comply with the additional request if it concerns an amount not less than that referred to in Article 7 of Appendix IV.
Article 18
Any sum recovered by the requested authority, including, where applicable, the interest referred to in Article 9 (2) of Appendix IV, shall be the subject of a transfer to the applicant authority in the currency of the country in which the requested authority is situated. This transfer shall take place within one month of the date on which the recovery was effected.
Article 19
Irrespective of any amounts collected by the requested authority by way of interest referred to in Article 9 (2) of Appendix IV, the claim shall be deemed to have been recovered in proportion to the recovery of the amount expressed in the national currency of the country in which the requested authority is situated, on the basis of the exchange rate referred to in Article 13 (2).
TITLE V
General and final provisions
Article 20
Article 21
Information and other particulars communicated by the requested authority to the applicant authority shall be made out in the official language or one of the official languages of the country in which the requested authority is situated.
ANNEX II TO APPENDIX IV
ANNEX III TO APPENDIX IV
ANNEX IV TO APPENDIX IV
( 1 ) Directive 95/46/EC of the European Parliament and of the Council of 24 October 1995 on the protection of individuals with regard to the processing of personal data and on the free movement of such data (OJ L 281, 23.11.1995, p. 31).
( 2 ) Commission Implementing Decision (EU) 2016/578 of 11 April 2016 establishing the Work Programme relating to the development and deployment of the electronic systems provided for in the Union Customs Code (OJ L 99, 15.4.2016, p. 6).
( 3 ) Decision No 1/2008 of the EC-EFTA Joint Committee on common transit of 16 June 2008 amending the Convention of 20 May 1987 on a common transit procedure (OJ L 274, 15.10.2008, p. 1).
( 4 ) Council Directive 2006/112/EC of 28 November 2006 on the common system of value added tax (OJ EU L 347, 11.12.2006, p. 1).
( 5 ) Council Directive 2008/118/EC of 16 December 2008 concerning the general arrangements for excise duty and repealing Directive 92/12/EEC (OJ EU L 9, 14.1.2009, p. 12).
( 6 ) Provisional code that does not affect the definitive denomination of the country to be attributed after the conclusion of the negotiations currently taking place in the United Nations.
( 7 ) Council Directive 2006/112/EC of 28 November 2006 on the common system of value added tax (OJ L 347, 11.12.2006, p. 1).
( 8 ) Council Directive 2008/118/EC of 16 December 2008 concerning the general arrangements for excise duty and repealing Directive 92/12/EEC (OJ L 9, 14.1.2009, p. 12).
( 9 ) Surname and forename, or name of firm.
( 10 ) Full address.
( 11 ) Delete the name/names of the State/States on whose territory the guarantee may not be used.
( 12 ) The references to the Principality of Andorra and the Republic of San Marino shall apply solely to Union transit operations.
( 13 ) Surname and forename, or name of firm and full address of the person providing the guarantee.
( 14 ) Applicable with respect to the other charges due in connection with the import or export of the goods where the guarantee is used for the placing of goods under the Union/common transit procedure or may be used in more than one Member State.
( 15 ) Enter one of the following customs operations:
temporary storage,
Union transit procedure/common transit procedure,
customs warehousing procedure,
temporary admission procedure with total relief from import duty,
inward processing procedure,
end-use procedure,
release for free circulation under normal customs declaration without deferred payment,
release for free circulation under normal customs declaration with deferred payment,
release for free circulation under a customs declaration lodged in accordance with Article 166 of Regulation (EU) No 952/2013 of the European Parliament and of the Council of 9 October 2013 laying down the Union Customs Code (OJ L 269, 10.10.2013, p. 1),
release for free circulation under a customs declaration lodged in accordance with Article 182 of Regulation (EU) No 952/2013,
temporary admission procedure with partial relief from import duty,
if another — indicate the other kind of operation.
( 16 ) If, in the law of the country, there is no provision for address for service, the guarantor shall appoint, in this country, an agent authorised to receive any communications addressed to him and the acknowledgement in the second subparagraph and the undertaking in the fourth subparagraph of point 4 must be made to correspond. The courts of the places in which the addresses for service of the guarantor or of his agents are situated shall have jurisdiction in disputes concerning this guarantee.
( 17 ) The person signing the document must enter the following by hand before his or her signature: ‘Guarantee for the amount of …’ (the amount being written out in letters)
( 18 ) To be completed by the office where the goods were placed under the procedure or were in temporary storage.
( 19 ) Surname and forename, or name of firm.
( 20 ) Full address.
( 21 ) The references to the Principality of Andorra and the Republic of San Marino shall apply solely to Union transit operations.
( 22 ) If, in the law of the country, there is no provision for address for service the guarantor shall appoint, in this country, an agent authorised to receive any communications addressed to him and the acknowledgement in the second subparagraph and the undertaking in the fourth subparagraph of point 4 must be made to correspond. The courts of the places in which the addresses for service of the guarantor or of his agents are situated shall have jurisdiction in disputes concerning this guarantee.
( 23 ) The signature must be preceded by the following in the signatory's own handwriting: ‘Valid as guarantee voucher’.
( 24 ) Surname and forename, or name of the firm.
( 25 ) Full address.
( 26 ) Delete the name/names of the country/countries on whose territory the guarantee may not be used.
( 27 ) The references to the Principality of Andorra and the Republic of San Marino shall apply solely to Union transit operations.
( 28 ) Surname and forename, or name of the firm, and full address of the person providing the guarantee.
( 29 ) Applicable with respect to the other charges due in connection with the import or export of the goods where the guarantee is used for the placing of goods under the Union/common transit procedure or may be used in more than one Member State or one Contracting Party.
( 30 ) Delete what does not apply.
( 31 ) Procedures other than common transit apply solely in the Union.
( 32 ) For amounts declared in a customs declaration for the end-use procedure.
( 33 ) If, in the law of the country, there is no provision for address for service the guarantor shall appoint, in this country, an agent authorised to receive any communications addressed to him and the acknowledgement in the second subparagraph and the undertaking in the fourth subparagraph of point 4 must be made to correspond. The courts of the place in which the addresses for service of the guarantor or of his agents are situated shall have jurisdiction in disputes concerning this guarantee.
( 34 ) The person signing the document must enter the following by hand before his or her signature: ‘Guarantee for the amount of …’ (the amount being written out in letters).
( 35 ) Recommendation 16 on UN/LOCODE – CODE FOR PORTS AND OTHER LOCATIONS