31994R2976

COUNCIL REGULATION (EC) No 2476/94 of 21 November 1994 temporarily suspending the autonomous Common Customs Tariff duty on certain industrial products (in the microelectronics and related sectors)

THE COUNCIL OF THE EUROPEAN UNION,

Having regard to the Treaty establishing the European Community, and in particular Article 28 thereof,

Having regard to the proposal from the Commission,

Whereas production of the products referred to in this Regulation is at present inadequate or non-existent within the Community and producers are thus unable to meet the needs of user industries in the Community;

Whereas it is in the Community's interest in certain cases to suspend the autonomous Common Customs Tariff duties only partially, particularly because of the existence of Community production, and in other cases to suspend them completely;

Whereas suspension of these autonomous duties shall be decided by the Community;

Whereas, taking account of the difficulties involved in accurately assessing the development of the economic situation in the sectors concerned in the near future, these suspension measures should be taken only temporarily, by fixing their period of validity by reference to the interests of Community production,

HAS ADOPTED THIS REGULATION:

Article 1

The autonomous Common Customs Tariff duties for the products listed in Annexes shall be suspended at the level indicated in respect of each of them.

These suspensions shall apply from 1 January to 30 June 1995.

Article 2

This Regulation shall enter into force on 1 January 1995.

This Regulation shall be binding in its entirety and directly applicable in all Member States.

Done at Brussels, 21 November 1994.

For the Council

The President

M. WISSMANN

ANNEX

"" ID="1">ex 8471 92 80> ID="2">*10> ID="3">Input unit (so-called 'touchpad'), the exterior dimensions of which do not exceed 50 × 62 mm, capable of matrix scanning and detection, consisting of 2 layers of measurement electrodes, a printed circuit, a capacitive matrix, 2 integrated circuits, discrete components and a connector, for use in the manufacture of products falling within heading 8471 (1)()> ID="4">0"> ID="1">ex 8471 99 80> ID="2">*10> ID="3">Optical reader for reading alphanumeric dot-matrix printing characters and converting them into electrical signals, comprising a read head containing an optical detector, an amplifier, a focusing lens and two lamps, linked by one or two flat cables to a central module the dimensions of which do not exceed 200 × 220 mm, comprising a printed circuit board on which are mounted a microprocessor, an image recognition circuit and an analogue-to-digital converter> ID="4">0"> ID="1">ex 8473 30 10> ID="2">*15> ID="3">Processor, consisting of:

- 15 monolithic integrated circuits, comprising an arithmetic-logic unit (ALU) of 32 bits, a halfword arithmetic-logic unit (ALU), a halfword multiplier, a floating point unit, a fixed point unit, a storage control unit, a storage interface circuit and 10 static random-access memories (S-RAMs) with a total storage capacity of 5 760 Kbits,

- decoupling capacitors and cooling plates,

the whole mounted on a multilayer ceramic substrate the exterior dimensions of which do not exceed 65 × 65 mm, with not more than 624 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters :

16G7559

16G7620

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8473 30 10> ID="2">*25> ID="3">Processor, consisting of:

- 12 monolithic integrated circuits, comprising 2 central processing units (CPUs) with an integer/floating point unit, 2 cache controllers, memory management and tag units (CMTUs) and 8 static random-access memories (S-RAMs) with a total storage capacity of 4 Mbits,

- decoupling capacitors and cooling plates,

the whole mounted on a multilayer ceramic substrate the exterior dimensions of which do not exceed 84 × 147 mm, with not more than 100 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters :

RT 6626K

RT 6236K

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8473 30 10> ID="2">*35> ID="3">Processing system, consisting of:

- not more than 121 monolithic integrated circuits not contained in a housing (chip),

- a ceramic substrate,

the whole enclosed between a metallic baseplate and a metallic plate incorporating not more than 121 cooling pistons filled with liquid> ID="4">0"> ID="1">ex 8473 30 10> ID="2">*45> ID="3">Memory module, consisting of at least 2 read only memories, non-programmable (ROMs)> ID="4">0"> ID="1">ex 8473 30 10> ID="2">*50> ID="3">Assembly for disc storage units of Winchester technology, comprising a 2- or 4-channel read/write monolithic integrated circuit for magnetic head signals mounted with discrete components on a flexible printed circuit> ID="4">0"> ID="1">ex 8473 30 10> ID="2">*55> ID="3">Flash electrically erasable, programmable, read only memory (Flash-E2PROM) with a storage capacity of 32 Mbits, consisting of 2 monolithic integrated circuits contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

28 F 032SA

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8473 30 90> ID="2">*50> ID="3">Magnetic bubble memories with a storage capacity of not more than 4 Mbits, contained in a housing the exterior dimensions of which do not exceed 43 × 44 mm, with not more than 56 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures or figures and letters:

7110

7114-1

FBM 54 DB

FBM 64 DA

BDL 0133

BDL 0134

BDN 0151

BDN 515

MBM 2011

MBM 2256

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8473 30 90> ID="2">*65> ID="3">Drive-unit, not incorporating a recording drum, for use in the manufacture of digital audio tape storage units (2)()> ID="4">0"> ID="1">ex 8473 30 90> ID="2">*70> ID="3">Data storage assembly (Head/Disc/Assembly) for disc storage units of the 10,8 inch type, with a data transfer rate per second of 3,9 megabytes, comprising 16 read/write heads and 9 rigid magnetic discs with a total storage capacity, formatted, of 17 gigabytes, the whole incorporated in a single hermetically sealed housing> ID="4">0"> ID="1">ex 8473 30 90> ID="2">*85> ID="3">Read/write assembly for hard disc storage units, comprising only one magnetic head of thin-film technology mounted on a carrier arm, capable of reading/writing to a density of 78 tracks or more per mm> ID="4">1,6"> ID="1">ex 8473 40 90> ID="2">*85> ID="3">Thermal printer head of thin-film technology, the exterior dimensions of which do not exceed 18 × 90 × 275 mm, consisting of:

- a printed circuit on a ceramic substrate fitted with monolithic integrated circuits and 2 880 heater elements,

- a printed circuit fitted with monolithic integrated circuits, capacitors, resistors and connectors,

- a thermistor

and

- 1 or 2 cooling plates> ID="4">0"> ID="1">ex 8501 10 99> ID="2">*58> ID="3">DC motor, with brushes, with a diameter of 6 mm (±0,2 mm) or 7,1 mm (±0,2 mm), a shaft of a diameter of 1 mm (±0,02 mm), a rated speed of 6 000 (±24 %) rpm and a supply voltage of 1,25 V (±36 %)> ID="4">0"> ID="1">ex 8501 10 99> ID="2">*76> ID="3">DC motor, coreless, with a diameter of 18 mm (±0,1 mm), a shaft with a diameter of 0,8 mm (±0,02 mm), a rated speed of 5 000 (±20 %) rpm and a supply voltage of 1,25 V (±36 %)> ID="4">0"> ID="1">ex 8504 50 90> ID="2">*10> ID="3">Inductor with a variable inductance not exceeding 62 mH> ID="4">0"> ID="1">ex 8504 50 90> ID="2">*20> ID="3">Multilayer monolithic inductors, contained in a housing of the SMD (Surface mounted device) type the exterior dimensions of which do not exceed 1,8 × 3,4 mm, for use in the manufacture of pagers (3)()> ID="4">0"> ID="1">ex 8507 30 91> ID="2">*10> ID="3">Rectangular nickel-cadmium accumulator, with a length of 67 mm (±0,1 mm), a width of 16,8 mm (±0,05 mm) and a thickness of 10,5 mm (±0,05 mm), having a nominal capacity of 1 200 mAh and a nominal voltage of 1,2 V, for use in the manufacture of rechargeable batteries (4)()> ID="4">0"> ID="1">ex 8507 90 98> ID="2">*10> ID="3">Rectangular nickel-hydrid accumulator, with a length of 48,4 mm (±1 mm), a width of 14,5 mm (±1 mm) and a thickness of 7,5 mm (±1 mm), having a capacity of 500 mAh or more and a nominal voltage of 1,2 V, for use in the manufacture of rechargeable batteries (5)()> ID="4">0"> ID="1">ex 8517 82 90> ID="2">*10> ID="3">Transmitter, capable of converting electrical signals into light pulses, operating at a nominal wavelength of 850 nm, comprising a light-emitting diode (LED), a current switch, an input buffer and a distortion/compensation circuit, contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

DM-231-TA

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8517 82 90> ID="2">*20> ID="3">Receive unit, capable of converting light pulses into electrical signals, operating at a nominal wavelength of 850 nm, comprising a photodiode, 2 decision circuits, an amplifier and an integrator, contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

DM-231-RA

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8517 90 11> ID="2">*01> ID="3">Modulator/demodulator of C-MOS technology (C-MOS-Modem), for full duplex data-transfer at a rate of 28 800 bits per second and for half duplex transfer of image telegraphy (facsimile) at a rate of 14 400 bits per second, only consisting of 2 or more monolithic integrated circuits, at least one of which for digital signal processing (DSP) and an other for analogue functions, mounted on a printed circuit, contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

RC 192DP

RC 192DPL

RC 240DP

RC 240DPL

RC 288DP

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8517 90 11> ID="2">*02> ID="3">Modulator/demodulator of C-MOS technology (C-MOS-Modem), only for half duplex transfer of data or image telegraphy (facsimile) at a rate not exceeding 2 400 bits per second, only consisting of 2 monolithic integrated circuits, one of which for digital signal processing (DSP) and the other for analogue functions, mounted on a printed circuit, contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

RC 24BKJ

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8517 90 11> ID="2">*03> ID="3">Modulator/demodulator of C-MOS technology (C-MOS-Modem), only for full duplex data-transfer at a rate not exceeding 2 400 bits per second, only consisting of 2 monolithic integrated circuits, one of which for digital signal processing (DSP) and the other for analogue functions, mounted on a printed circuit, contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

RC 2324DPL

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8517 90 11> ID="2">*04> ID="3">Modulator/demodulator of C-MOS technology (C-MOS-Modem), only for half duplex transfer of image telegraphy (facsimile) at a rate not exceeding 9 600 bits per second, only consisting of 2 monolithic integrated circuits, one of which for digital signal processing (DSP) and the other for analogue functions, mounted on a printed circuit, contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

R 96DFX

R 96EFX

R 96MFX

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8517 90 11> ID="2">*05> ID="3">Modulator/demodulator of C-MOS technology (C-MOS-Modem), for full duplex data-transfer at a rate not exceeding 9 600 bits per second and for half duplex transfer of image telegraphy (facsimile) at a rate not exceeding 9 600 bits per second, only consisting of 2 or 3 monolithic integrated circuits, 1 or 2 of which for digital signal processing (DSP) and an other for analogue functions, mounted on a printed circuit, contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

RC 9323

RC 9624

RC 96DPL

RC 96V24

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8517 90 81> ID="2">*30> ID="3">Assembly consisting of a laser diode operating at a nominal wavelength of 780 nm, a photodiode and a lens, contained in a housing with a diameter of not more than 9 mm and a height of not more than 20 mm, with not more than 3 connections and bearing:

- an identification marking consisting of or including one of the following combination of letters or of figures and letters:

FU-011SLD-N2

LM-7115

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8522 90 91> ID="2">*91> ID="3">Optical unit consisting of a laser diode with one photodiode, emitting light of a nominal wavelength of 780 nm, contained in a housing with a diameter of not more than 10 mm and a height of not more than 9 mm, with not more than 10 connections and bearing:

- an identification marking consisting of or including one of the following combination of letters or of figures and letters:

LDGU

LT 022

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8522 90 91> ID="2">*92> ID="3">Electronic assembly for a laser read-head of a compact disc player, comprising:

- a flexible printed circuit,

- a photo-detector, in the form of a monolithic integrated circuit, contained in a housing,

- 2 connectors,

- not more than 1 transistor,

- not more than 3 variable and 4 fixed resistors,

- not more than 5 capacitors,

the whole mounted on a support> ID="4">0"> ID="1">ex 8522 90 99> ID="2">*92> ID="3">Thinfilm recording and reproducing device, having 9 parallel channels for digital signals and 2 channels for analogue signals, to which a non-magnetic ceramic substrate is fixed, the whole rounded at one side, for use in the manufacture of magnetic heads for digital sound recording and digital/analogue sound reproducing apparatus of the cassette-type (6)()> ID="4">0"> ID="1">ex 8522 90 99> ID="2">*94> ID="3">Sound reproducing assembly, consisting of a compact disc mechanism, comprising an optical reading system and 3 DC motors, for use in the manufacture of products falling within subheading 8527 21 10 (7)()> ID="4">0"> ID="1">ex 8523 20 10> ID="2">*50> ID="3">Rigid magnetic disc with a thin-film metallic coating, having a coercivity exceeding 600 Oe and an external diameter not exceeding 231 mm> ID="4">0"> ID="1">ex 8529 10 70> ID="2">*10> ID="3">Ceramic filter package comprising 2 ceramic filters and 1 ceramic resonator for a frequency of 10,7 MHz (±30 kHz), contained in a housing the exterior dimensions of which do not exceed 10 × 10 mm> ID="4">0"> ID="1">ex 8529 10 70> ID="2">*20> ID="3">Ceramic filters for frequencies of 4,5 MHz or more but not exceeding 6,6 MHz contained in a housing the dimensions of which do not exceed 9 × 24 mm> ID="4">0"> ID="1">ex 8529 90 98> ID="2">*31> ID="3">Demagnetisation coil with not more than 96 windings, with cables and connectors> ID="4">0"> ID="1">ex 8529 90 98> ID="2">*32> ID="3">Filter, consisting of 2 piezo-electric crystals each with a frequency of 21 MHz or more but not exceeding 30 MHz and seperately mounted on a bracket, with not more than 7 connections> ID="4">0"> ID="1">ex 8529 90 98> ID="2">*96> ID="3">Assembly comprising a lens unit, having a focal length of 3,6 mm, an interline charge-coupled image sensor having 291 000 photosensitive cells, and integrated circuits, the whole mounted on a printed circuit> ID="4">0"> ID="1">ex 8531 20 51> ID="2">*10> ID="3">Liquid crystal colour display (LCD) with an active matrix and 640 × 480 pixels, consisting of a layer of liquid crystals between two glass sheets or plates, mounted on a printed circuit board comprising electronic components providing drive and/or control functions> ID="4">0"> ID="1">ex 8531 20 51> ID="2">*20> ID="3">Liquid crystal colour display (LCD) with an active matrix and 768 × 1 024 pixels, consisting of a layer of liquid crystals between two glass sheets or plates, comprising electronic components providing drive and/or control functions> ID="4">0"> ID="1">ex 8531 20 59> ID="2">*10> ID="3">Liquid crystal monochrome display (LCD) with an active matrix and 640 × 400 or 640 × 480 pixels, consisting of a layer of liquid crystals between two glass sheets or plates, mounted on a printed circuit board comprising electronic components providing drive and/or control functions> ID="4">0"> ID="1">ex 8531 20 59> ID="2">*20> ID="3">Liquid crystal monochrome display (LCD) with an active matrix and 900 × 1 152 pixels, consisting of a layer of liquid crystals between two glass sheets or plates, comprising electronic components providing drive and/or control functions> ID="4">0"> ID="1">ex 8531 20 80> ID="2">*10> ID="3">Liquid crystal display (LCD) with a passive matrix, comprising electronic components providing drive and/or control functions> ID="4">0"> ID="1">ex 8531 80 90> ID="2">*20> ID="3">Transducer, capable of producing a sound level of 85 dB at a frequency of 2 700 or 3 200 Hz> ID="4">0"> ID="1">ex 8532 22 00> ID="2">*95> ID="3">Aluminium electrolytic capacitors, with a fixed nominal capacity not exceeding 470 mF and an operating voltage not exceeding 50 V, operating within a temperature range of -40 °C to + 85 °C> ID="4">0"> ID="1">ex 8532 22 00> ID="2">*96> ID="3">Aluminium eletrolytic capacitors, with a fixed nominal capacity of 2,2 mF and an operating voltage of 385 V, operating within a temperature range of -40 °C to + 85 °C> ID="4">0"> ID="1">ex 8533 10 00> ID="2">*91> ID="3">Fixed carbon-film resistor of the SMD (Surface mounted device) type, with a continous operating voltage not exceeding 250 V> ID="4">0"> ID="1">ex 8533 10 00> ID="2">*92> ID="3">Fixed carbon composition resistor, with an operating voltage not exceeding 350 V and a dissipation rate not exceeding 0,5 W> ID="4">0"> ID="1">ex 8534 00 11> ID="2">*93> ID="3">Multiple printed circuits on a ceramic substrate, the exterior dimensions of which are not less than 125 × 125 mm and do not exceed 129 × 129 mm, consisting only of conductor elements and 2 772 contacts> ID="4">0"> ID="1">ex 8534 00 19> ID="2">*95> ID="3">Printed circuit, consisting of conductor elements fixed on a flexible plastic film, with a trace width of 0,095 mm or more but not exceeding 3,5 mm and a trace pitch of 0,095 mm or more but not exceeding 0,305 mm, for use in the manufacture of electronic calculating machines (8)()> ID="4">0"> ID="1">ex 8534 00 19> ID="2">*96> ID="3">Printed circuit on an aluminium oxide support, only with gold plated conductor elements of thick film technology, for use in the manufacture of products falling within subheading 8542 20 50 (9)()> ID="4">0"> ID="1">ex 8536 50 90> ID="2">*92> ID="3">Reed switch having a switching power of 20 W or more within the range of 17-43 A.turn, in the form of a glass capsule, not containing mercury, the dimensions of which do not exceed 3 × 21 mm, for use in the manufacture of automotive airbag shock-sensors (10)()> ID="4">0"> ID="1">ex 8540 12 00> ID="2">*82> ID="3">Monochrome cathode-ray tube with a diagonal measurement of the screen of 250 mm or more but not exceeding 320 mm and an anode voltage of 18 kV or more but not exceeding 22 kV > ID="4">0"> ID="1">ex 8540 30 10> ID="2">*34> ID="3">Colour cathode-ray tube with a dot mask, equipped with 3 electron guns placed side by side (in-line technology) or 1 gun with 3 rays, with a diagonal measurement of the screen of more than 72 cm and a distance of less than 0,5 mm between dots of the same colour> ID="4">0"> ID="1">ex 8540 30 10> ID="2">*35> ID="3">Colour cathode-ray tube with a dot mask, equipped with 3 electron guns placed side by side (in-line technology) or 1 gun with 3 rays, having a diagonal measurement of the screen not exceeding 72 cm> ID="4">0"> ID="1">ex 8540 91 00> ID="2">*94> ID="3">Deflector yoke for a colour cathode-ray tube, with an operating frequency of 15 625 or 31 250 Hz, comprising two 2-pole ring magnets, two 4-pole ring magnets and two 6-pole ring magnets> ID="4">0"> ID="1">ex 8540 91 00> ID="2">*96> ID="3">Assembly for a cathode-ray tube with 2 or more but not more than 6 coils, a platic support and a metal fixing ring, for the adjustment of display sharpness and/or convergence> ID="4">0"> ID="1">ex 8540 99 00> ID="2">*91> ID="3">Anode, cathode or output part, or an assembly comprising these components (magnetron core tube), for the manufacture of magnetrons of subheading 8540 41 00 (11)()> ID="4">0"> ID="1">ex 8541 10 91> ID="2">*10> ID="3">Silicon power rectifier diodes of planar technology, with a recovery time of less than 100 ns, a maximum recurring reverse voltage of 200 V, and average forward current of 2,5 A or more, contained in a flat housing the exterior dimensions of which exceed 3 × 9 × 9 mm but do not exceed 5 × 11 × 17 mm> ID="4">0"> ID="1">ex 8541 10 91> ID="2">*20> ID="3">Silicon power rectifier diode, with a reverse peak voltage not exceeding 1 500 V and an average output current of 8 A, contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

PG151S15

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8541 10 99> ID="2">*30> ID="3">Current regulative diode, providing a stabilized current level not exceeding 18 mA at a voltage of 10 V> ID="4">0"> ID="1">ex 8541 29 90> ID="2">*10> ID="3">Transistor with a power of 150 W or more at a voltage of 160 V or more and with a cut-off frequency of 20 MHz or more, contained in a housing the exterior dimensions of which do not exceed 22 × 37 mm, with not more than 3 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

2 SA 1170

2 SA 1215

2 SA 1494

2 SC 2774

2 SC 2921

2 SC 3858

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8541 29 90> ID="2">*30> ID="3">Field-effect transistor (FET), having a drain-to-source breakdown-voltage 60 V or more, operating with a drain-current not exceeding 8,5 A, a drain-to-source resistance not exceeding 0,3 ohm, and with a dissipation rate not exceeding 30 W, contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

IRFD 014

IRFR 010

IRFR 014

IRFU 014

IRLR 014

IRLU 014

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8541 29 90> ID="2">*40> ID="3">Transistor with thermal overload protection, having a collector-emitter operating voltage not exceeding 42 V, contained in a housing with not more than 4 connections> ID="4">0"> ID="1">ex 8541 29 90> ID="2">*50> ID="3">Transistor with an output power not exceeding 30 W at a voltage of 12,5 V, contained in a housing with not more than 8 connections> ID="4">0"> ID="1">ex 8541 29 90> ID="2">*60> ID="3">Field-effect transistor of N-MOS technology (MOSFET), having a drain-to-source breakdown-voltage of 60 V or more, operating with a continuous drain current not exceeding 35 A, a drain-to-source resistance not exceeding 0,028 ohm and with a dissipation rate not exceeding 125 W, contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

5101GK

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8541 29 90> ID="2">*70> ID="3">Transistor, having a dissipation rate not exceeding 250 W, a collector-emitter breakdown voltage of 120 V or more and a peak collector current not exceeding 40 A, contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

2SC3675

2SC3781

2SC3997

2SC4152

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8541 40 10> ID="2">*60> ID="3">Light-emitting diode (LED), made from gallium-arsenic-phosphor (GaAsP) semiconductor, operating at a nominal wavelength of 710 nanometers, in the form of a monolithic integrated circuit not contained in a housing (chip), for the manufacture of optocouplers (12)()> ID="4">0"> ID="1">ex 8541 60 00> ID="2">*93> ID="3">Piezo-electric crystal, excluding surface acoustic wave filters, oscillating at a frequency of 4 MHz or more but not exceeding 155 MHz, contained in a housing of the SMD (Surface mounted device) type and with not more than 4 connections> ID="4">0"> ID="1">ex 8542 11 01> ID="2">*12> ID="3">Wafer, not yet cut into chips, consisting only of microcontrollers or microcomputers of C-MOS technology, with a processing capacity of 16 bits, comprising a read only memory, non-programmable (ROM) with a storage capacity of 48 Kbits, a read only memory, non-programmable (ROM) with a storage capacity of 16 Kbits and a random-access memory (RAM) with a storage capacity of 4 Kbits, for use in the manufacture of goods of subheading 8542 11 73 contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

77C25

or

- other identification markings relating to devices complying with the abovementioned description (13)()> ID="4">0"> ID="1">ex 8542 11 01> ID="2">*25> ID="3">Wafer, not yet cut into chips, consisting only of microcontrollers or microcomputers of C-MOS or N-MOS (including H-MOS) technology, with a processing capacity of 16 bits, comprising a read only memory, non-programmable (ROM) with a storage capacity of 510 × 13 bits, a read only memory, non-programmable (ROM) with a storage capacity of 512 × 23 bits and a random-access memory (RAM) with a storage capacity of 2 Kbits, for use in the manufacture of goods of subheading 8542 11 73 contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations figures or of figures and letters:

7720

77C20

or

- other identification markings relating to devices complying with the abovementioned description (14)()> ID="4">0"> ID="1">ex 8542 11 01> ID="2">*40> ID="3">Wafer, not yet cut into chips, consisting only of microprocessors with a processing capacity of 16 bits, for use in the manufacture of goods of subheading 8542 11 64 contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

7810

78C10

or

- other identification markings relating to devices complying with the abovementioned description (15)()> ID="4">0"> ID="1">ex 8542 11 05> ID="2">*15> ID="3">Control and interface circuit of BiMOS technology, capable of controlling communication between a microprocessor, bus control circuits and a memory control circuit, in the form of a monolithic integrated circuit not contained in a housing (chip), for use in the manufacture of goods of subheading 8542 11 84 contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

16G7432

16G7433

50G6759

50G6761

or

- other identification markings relating to devices complying with the abovementioned description (16)()> ID="4">0"> ID="1">ex 8542 11 05> ID="2">*25> ID="3">Bus control circuit of BiMOS technology, in the form of a monolithic integrated circuit not contained in a housing (chip), for use in the manufacture of goods of subheading 8542 11 82 contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

16G7429

16G7430

50G6755

50G6757

or

- other identification markings relating to devices complying with the abovementioned description (17)()> ID="4">0"> ID="1">ex 8542 11 05> ID="2">*35> ID="3">Memory control circuit of BiMOS technology, in the form of a monolithic integrated circuit not contained in a housing (chip), for use in the manufacture of goods of subheading 8542 20 80 contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

16G7428

16G7463

or

- other identification markings relating to devices complying with the abovementioned description (18)()> ID="4">0"> ID="1">ex 8542 11 05> ID="2">*45> ID="3">Bus control circuit of C-MOS technology, in the form of a monolithic integrated circuit not contained in a housing (chip), for use in the manufacture of goods of subheading 8542 11 82 contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures or of figures and letters:

2782654

52G7385

52G7386

63F4057

63F4073

63F4074

63F4170

63F4378

69G1705

81889051

or

- other identification markings relating to devices complying with the abovementioned description (19)()> ID="4">0"> ID="1">ex 8542 11 05> ID="2">*50> ID="3">Microprocessor with a processing capacity of more than 16 bits, in the form of a monolithic integrated circuit not contained in a housing (chip), for use in the manufacture of goods of subheading 8542 11 67 or 8542 11 68 contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures or of figures and letters:

32G7577

32G7578

80501

8186362

8186364

8188937

8188939

82F5698

82F5700

PC 601

PC 603

PC 604

or

- other identification markings relating to devices complying with the abovementioned description (20)()> ID="4">0"> ID="1">ex 8542 11 05> ID="2">*55> ID="3">Memory control circuit of C-MOS technology, in the form of a monolithic integrated circuit not contained in a housing (chip), for use in the manufacture of goods of subheading 8542 11 82 contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures or of figures and letters:

32G7468

32G7567

50G6870

50G8191

8186387

8188905

or

- other identification markings relating to devices complying with the abovementioned description (21)()> ID="4">0"> ID="1">ex 8542 11 05> ID="2">*60> ID="3">Triple digital-to-analogue video converter with 3 random-access memories (RAMDACs) of C-MOS technology, in the form of a monolithic integrated circuit not contained in a housing (chip), for use in the manufacture of goods of subheading 8542 11 86 contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures or of figures and letters:

RGB525

RGB528

RGB530 (8187135)

RGB561 (8186987)

or

- other identification markings relating to devices complying with the abovementioned description (22)()> ID="4">0"> ID="1">ex 8542 11 05> ID="2">*65> ID="3">Bus interface and control circuit of C-MOS technology, in the form of a monolithic integrated circuit not contained in a housing (chip), for use in the manufacture of goods of subheading 8542 11 84 contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

2782454

or

- other identification markings relating to devices complying with the abovementioned description (23)()> ID="4">0"> ID="1">ex 8542 11 05> ID="2">*70> ID="3">Data/address buffer circuit of C-MOS technology, in the form of a monolithic integrated circuit not contained in a housing (chip), for use in the manufacture of goods of subheading 8542 11 86 contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures:

2782653

8190694

or

- other identification markings relating to devices complying with the abovementioned description (24)()> ID="4">0"> ID="1">ex 8542 11 05> ID="2">*75> ID="3">Static random-access cache memory (Cache S-RAM) of C-MOS technology, with a storage capacity of 256 or 512 Kbits, in the form of a monolithic integrated circuit not contained in a housing (chip), for use in the manufacture of goods of subheading 8542 11 23 or 8542 11 25 contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures or of figures and letters:

32G7587

32G7588

32G7607

32G7608

50G7244

8186318

8186377

8186379

or

- other identification markings relating to devices complying with the abovementioned description (25)()> ID="4">0"> ID="1">ex 8542 11 14> ID="2">*02> ID="3">Dual or triple port dynamic random-access memory (D-RAM), with data registers and a serial read output control, with a storage capacity exceeding 256 Kbit but not exceeding 1 Mbit, in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

M5M 442256

MB 81 C 4251

MSM 54C864

MT 42 C 4256

MT 43 C 4257

MT 43 C 4258

MT 43 C 8128

TC 524256

TC 524257

TC 528126

TC 528128

TMS 44 C 251

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 14> ID="2">*03> ID="3">Random-access memory, with separate in- and outputs and serial shift registers (so-called field memories), of C-MOS technology, with a storage capacity of 870 Kbits, in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

TMS 4C1081

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 16> ID="2">*05> ID="3">Dynamic random-access memory of C-MOS technology (C-MOS D-RAM), with a storage capacity of 512 K × 8 bits and an access time not exceeding 35 ns, comprising 4 static random-access cache memories (S-Cache-RAMs) with a total storage capacity of 8 Kbits, in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

DM 2203

DM 2213

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 16> ID="2">*06> ID="3">Dynamic random-access memory of C-MOS technology (C-MOS D-RAM), with a storage capacity of 2 Mbits and an access time not exceeding 60 ns, in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

V53C8256

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 16> ID="2">*07> ID="3">Random-access memory, with separate in- and outputs and serial shift registers (so-called field memories), of C-MOS technology, with a storage capacity of 1 920 Kbits, in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

TMS 4C2070

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 16> ID="2">*08> ID="3">Dynamic random-access memory of C-MOS technology (C-MOS D-RAM), with a storage capacity of 512 K × 8 bits and an access time not exceeding 100 ns, operating with a supply voltage of 3,3 V (±0,3 V), in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

HM51W4 800 (74G1307) (70G6821)

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 18> ID="2">*03> ID="3">Random-access memory, with separate in- and outputs and serial shift registers (so-called field memories), of C-MOS technology, with a storage capacity of 4 320 Kbits, in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

TMS 53805

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 21> ID="2">*19> ID="3">Quadruple port static random-access memory of C-MOS technology (C-MOS quadruple port S-RAM), with a storage capacity not exceeding 64 Kbits and an access time not exceeding 45 ns, in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

IDT 7050

IDT 7052

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 21> ID="2">*20> ID="3">Static random-access cache memory of C-MOS technology (C-MOS S-Cache-RAM), with a storage capacity of 16 Kbits, comprising an 4-bit identity comparator, in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

MCM 62350

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 21> ID="2">*51> ID="3">Static random-access memory of C-MOS technology (C-MOS S-RAM), with a storage capacity of 64 Kbits and an access time exceeding 55 ns, in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

HY 6264A

KM 6264

SRM 2064

TC 5564

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 23> ID="2">*03> ID="3">Static random-access memory of C-MOS technology (C-MOS S-RAM), with a storage capacity of 192 Kbits and an access time not exceeding 35 ns, in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

MCM 56824

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 25> ID="2">*10> ID="3">Static random-access memory (S-RAM), with a storage capacity of 1 Mbit, in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

CXK581020

CY7C101

CY7C102

CY7C106

CY7C107

CY7C108

CY7C109

EDI 88128

GM 76C8128

HM 621100A

HM 624256

HM 624257

HM 628128

M5M 51004

M5M 51008

MCM 6228

MCM 6729

MT 5C1008

TC 551001

TC 55B4256

TC 55B4257

TC 55B8128

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 25> ID="2">*13> ID="3">Static random-access memory of C-MOS technology (C-MOS S-RAM), operating at a power supply of 3,3 V (±0,3 V), with a storage capacity of 288 Kbits and an access time not exceeding 35 ns, in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

CY7C1388

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 42

ex 8542 11 59> ID="2">*21

*61> ID="3"> UV erasable or non-erasable, programmable, read only memory (EPROM or PROM), with a storage capacity of 256 Kbits and an access time not exceeding 65 ns, in the form of a monolithic integrated circuit contained in a housing, with or without a quartz window on the upper surface, and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

27C256-55

27H256-35

27H246-45

CY 7C 270

CY 7C 271

CY 7C 274

CY 7C 275

CY 7C 276

CY 7C 277

CY 7C 279

XC 17256D

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 44> ID="2">*06> ID="3">Flash electrically erasable, programmable, read only memory (Flash-E2PROM) with a storage capacity of 1 Mbit, in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

28 F 010

28 F 210

29 F 010

29 F 100

48 F 010

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 44

ex 8542 11 59> ID="2">*07

*68> ID="3"> UV erasable or non-erasable, programmable, read only memory (EPROM or PROM), with a storage capacity of 512 Kbits and an access time not exceeding 55 ns, in the form of a monolithic integrated circuit contained in a housing, with or without a quartz window on the upper surface, and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

CY 7C 286-50

CY 7C 287-45

CY 7C 287-55

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 44> ID="2">*08> ID="3">Flash electrically erasable, programmable, read only memory (Flash-E2PROM) with a storage capacity of 896 Kbits, in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

N71564FTCHCA

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 46> ID="2">*01> ID="3">Flash electrically erasable, programmable, read only memory (Flash-E2PROM) with a storage capacity of 2 Mbits, in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

28 F 002

28 F 020

28 F 200

29 F 200

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 46> ID="2">*02> ID="3">Flash electrically erasable, programmable, read only memory (Flash-E2PROM) with a storage capacity of 4 Mbits, in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

28 F 040

28 F 400

29 F 040

TC 584 000

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 48> ID="2">*02> ID="3">Flash electrically erasable, programmable, read only memory (Flash-E2PROM) with a storage capacity of 8 Mbits, in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

28 F 008

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 48> ID="2">*03> ID="3">Flash electrically erasable, programmable, read only memory (Flash-E2PROM) with a storage capacity of 16 Mbits, in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

28 F 016SA

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 50> ID="2">*06> ID="3">Electrically erasable, programmable, read only memory (E2PROM), with a storage capacity of 8 K × 8 bits, in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

28 C 64

28 H 64

28 HC 64

28 PC 64

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 59> ID="2">*02> ID="3">Ferroelectric memory of C-MOS technology, in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

FM1208S

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 59> ID="2">*07> ID="3">FIFO (first in, first out) read/write memory of C-MOS technology, for simultaneous reading and writing in one clock signal, with a storage capacity of 2 K × 18 bits, in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

CY7C447

CY7C457

MT 53C2K18C3

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 59> ID="2">*21> ID="3">FIFO (first in, first out), read/write memory of C-MOS technology, with a storage capacity of 64 × 8 bits or 64 × 9 bits, in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

CY7C408A

CY7C409A

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 59> ID="2">*24> ID="3">FIFO (first in, first out) read/write memory, with a storage capacity of 7 280 or 9 080 bits, in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

PD 41101

PD 41102

PD 42101

PD 42102

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 59> ID="2">*26> ID="3">FIFO (first in, first out) read/write memory of C-MOS technology, for simultaneous reading and writing in one clock signal, with a storage capacity of 512 × 9 bits and an access time not exceeding 40 ns, in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

CY7C441

CY7C451

IDT 72211

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 59> ID="2">*27> ID="3">FIFO (first in, first out) read/write memory of C-MOS technology, for simultaneous reading and writing in one clock signal or bidirectional operation, with a storage capacity of 9 or 18 Kbits, in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

CY7C439

CY7C443

CY7C445

CY7C446

CY7C453

CY7C455

CY7C456

IDT 72021

IDT 72031

IDT 72215

MT 53C51218A1

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 59> ID="2">*31> ID="3">FIFO (first in, first out) read/write memory of C-MOS technology, with a storage capacity of 72 Kbits and with an access time not exceeding 15 ns or a programmable flag register, in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

CY7C460-15

CY7C470

IDT 7205

MT 53C4K18D4-15

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 59> ID="2">*71> ID="3">FIFO (first in, first out) read/write memory of C-MOS technology, capable of asynchronous reading and writing, with a storage capacity of 512 × 9 bits, 1 K × 9 bits, 2 K × 9 bits or 4 K × 9 bits and an access time not exceeding 15 ns, in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

CY7C421

CY7C425

CY7C429

CY7C433

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 62

ex 8542 11 64

ex 8542 11 67

ex 8542 11 68> ID="2">*03

*03

*03

*01> ID="3"> Floating-point arithmetic co-processor, in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures or figures and letters:

3171

74 ACT 8847

79 R 2010

79 R 3010

80287

80387

8087

80C287

CY 7C 602

MC 68881

MC 68882

NCR 32020

NS 32081

NS 32381

R 2010/16

TX 32081 W

US 83C87

US 83S87

WTL 3167

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 62> ID="2">*42> ID="3">Microprocessor with a processing capacity not exceeding 8 bits, in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures or figures and letters:

82389

8294

82C389

Am 79C410

Am 79C411

CXD 2515Q

CXD 2601

HD 64A180

HD 64B180

MC 68302

MC68HC11EDO

MC68HC11F

PC 87323 VF

PC 87911

SC414950FB

Z 64180

Z 8068

Z 86C95

Z 9518

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 64> ID="2">*45> ID="3">Microprocessor with a processing capacity exceeding 8 bits but not exceeding 16 bits, in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters :

1TX9-0301

76001FCCHFA

76005 CN

80186

80188

80286

82389

80C186

80C188

80C196

80C286

80C296

82C389

ADSP 2100

ADSP 2101

ADSP 2102BS-50

CF 70064

CF 70095

CF 70200

CF 72301

CF 72305A

CIFAX

DSP 56116

DSP 56156

DSP 56200

MB 89T713

MB 89T715

MC 68302

PD 70236

TMS 38010

TMS 380C16

TMS 380C24

TMS 380C25

TMS 380C26

TMS 380C27

XSP 56200

Z 280

Z 70108

Z 70116

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 67> ID="2">*41> ID="3">Microprocessor with a processing capacity exceeding 16 bits but not exceeding 32 bits, in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

390 Z 50

486

78201441

79R2 000A

79R3000

80386

80486

80501

80960KB

82389

82596

82C389

86C020

Am 29000

CPU 04041871

CY7C601

DC 262 A

DSP 32 C

L 64801

MB 86904CR

MC 68020

MC 68030

MC 68040

MC 68331

MC 68EC020

MC 88110

NCR 32 000

NS 32032

NS 32332

NS 32532

NS 32C032

PC 601

PC 603

PC 604

R 2 000/16

ST 18931

ST 18932

ST 18941

ST 18R942

TMS 320M500

TMS 320M520

TMX 320M440

W 8701

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 68> ID="2">*32> ID="3">Microprocessor with a processing capacity exceeding 32 bits, in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures or of figures and letters:

21064

80860

R 4 000

R 4300

R 4400

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 71> ID="2">*02> ID="3">Microcontroller or microcomputer of C-MOS technology, with a processing capacity of 8 bits, comprising a read only memory, non-programmable (ROM) with a storage capacity of 224, 256 or 320 Kbits, a random-access memory (RAM) with a storage capacity of 3,5 or 4,5 Kbits, an analogue-to-digital converter, a timer/counter, a display control circuit, a bus interface, a remote control circuit, an interrupt controller and a clock generator, in the form of a monolithic intergrated circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

CXP 85228

CXP 85232

CXP 85340

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 71> ID="2">*03> ID="3">Microcontroller or microcomputer of C-MOS technology, with a processing capacity of 8 bits, comprising a read only memory, non-programmable (ROM) with a storage capacity of 192 Kbits, random-access memories (RAMs) with a total storage capacity of 6 400 bits, an analogue-to-digital converter, a timer/counter, a programmble pattern generator, a servo input control circuit, a serial interface and a clock generator, in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

CXD 80724

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 71> ID="2">*04> ID="3">Microcontroller or microcomputer of C-MOS technology, with a processing capacity of 8 bits, comprising a read only memory, non-programmable (ROM) with a storage capacity of 256 or 320 Kbits and a random-access memory (RAM) with a storage capacity of 10 496 bits, in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

CXP 87132

CXP 87140

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 71> ID="2">*05> ID="3">Microcontroller or microcomputer of C-MOS technology, with a processing capacity of 8 bits, comprising of a read only memory, non-programmable (ROM) with a storage capacity of 192 Kbits, a random-access memory (RAM) with a storage capacity of 4 Kbits, an analogue-to-digital converter and a display drive circuit, in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

TMP87CK70AF

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 71> ID="2">*06> ID="3">Microcontroller or microcomputer of C-MOS technology, with a processing capacity of 8 bits, comprising a read only memory, non-programmable (ROM) with a storage capacity of 160 or 256 Kbits, a random-access memory (RAM) with a storage capacity of 5 or 8 Kbits, a random-access memory (RAM) with a storage capacity of 1 280 bits, and a display control circuit, in the form of a monolithic intergrated circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

M37500M5

M37500M8

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 71> ID="2">*12> ID="3">Microcontroller or microcomputer of C-MOS technology, with a processing capacity of 8 bits, comprising a read only memory, non-programmable (ROM) or a programmable, non-erasable, read only memory (PROM) or a UV erasable, programmable, read only memory (EPROM) with a storage capacity of 64, 128 or 256 Kbits, a random-access memory (RAM) with a storage capacity of 4 or 8 Kbits and a display control circuit, in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

M 38203E4

M 38203M2

M 38207E8

M 38207M8

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 71> ID="2">*13> ID="3">Microcontroller or microcomputer of C-MOS technology, with a processing capacity of 8 bits, comprising a read only memory, non-programmable (ROM) with a storage capacity of 96 Kbits or of 127 Kbits or more but not exceeding 384 Kbits, a random-access memory (RAM) with a storage capacity of 2 Kbits or more but not exceeding 8 Kbits, a serial interface circuit and a display control and drive circuit, in the form of a monolithic intergrated circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

CXP 82316

MB 89098

PD 75316

TMP 87CC20F

TMP 87CH20F

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 71> ID="2">*24> ID="3">Microcontroller or microcomputer of C-MOS technology, with a processing capacity of 8 bits, having a register-to-register architecture, comprising a static random-access memory (S-RAM) with a storage capacity of not more than 12 Kbits and at least a read only memory, non-programmable (ROM) or a programmable, non-erasable, read only memory (PROM) or an UV-erasable, programmable, read only memory (EPROM) or an electrically erasable, programmable, read only memory (E2PROM), with a storage capacity of not more than 256 Kbits, in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

370C010

370C032

370C050

370C052

370C056

370C058

370C150

370C156

370C250

370C256

370C310

370C332

370C350

370C352

370C356

370C358

370C732

370C756

370C758

370C810

370C850

374C036

73C41

73C42

73C85

73C88

73C95

73C161

MC 68HC05P1

MC 68HC05P8

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 71> ID="2">*25> ID="3">Microcontroller or microcomputer of C-MOS technology, with a processing capacity of 8 bits, providing voice message storage, comprising a read only memory, non-programmable (ROM) with a storage capacity of 128 Kbits, an UV-erasable, programmable, read only memory (EPROM) interface circuit, a random-access memory (RAM) interface circuit and a communication interface circuit, in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

D6305A

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 71> ID="2">*26> ID="3">Microcontroller or microcomputer of C-MOS technology, with a processing capacity of 8 bits, comprising a read only memory, non-programmable (ROM) or a programmable, non-erasable, read only memory (PROM) or an UV erasable, programmable, read only memory (EPROM) with a storage capacity of 32 Kbits or more but not exceeding 256 Kbits and a random-access memory (RAM) with a storage capacity not exceeding 3 Kbits, in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

83L51FC

87C51

87C54

87C58

M50958

M50959

MC68HC05i8

MC68HC705i8

MN 1871215

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 71> ID="2">*29> ID="3">Microcontroller or microcomputer of C-MOS technology, with a processing capacity of 8 bits, comprising a random-access memory (RAM) with a storage capacity of 4 or 6 Kbits, a read only memory, non-programmable (ROM) or a programmable, non-erasable, read only memory (PROM) or an UV erasable, programmable, read only memory (EPROM), with a storage capacity of 96 or more but not exceeding 192 Kbits, an electrically erasable programmable, read only memory (E2PROM) with a storage capacity of 4 or 5 Kbits and an 8-channel analogue-to-digital converter, in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

MC 68HC11E9

MC 68HC11K4

MC 68HC11L6

MC 68HC711E9

MC 68HC711K4FN

MC 68HC711K4FS

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 71> ID="2">*42> ID="3">Microcontroller or microcomputer of C-MOS technology, with a processing capacity of 8 bits, providing protocol control, data formatting and audio signal processing, comprising 1 or 2 random-access memories (RAMs) with a total storage capacity not exceeding 10 Kbits and a read only memory, non-programmable (ROM) with a storage capacity of 192 Kbits, in the form of a monolithic intergrated circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

Am 79C412

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 71> ID="2">*43> ID="3">Microcontroller or microcomputer of C-MOS technology, with a processing capacity of 8 bits, comprising a 16-bit digital signal processor, a random-access memory (RAM) with a storage capacity of 4 Kbits or more but not exceeding 16 Kbits and having the function of programme memory, 2 random-access memories (RAMs) with a total storage capacity of 2 Kbits or more but not exceeding 8 Kbits and 256 registers, in the form of a monolithic intergrated circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

Z 86294

Z 86295

Z 86C95

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 71> ID="2">*44> ID="3">Microcontroller or microcomputer of C-MOS technology, with a processing capacity of 8 bits, providing floppy disc storage unit or keyboard control functions, comprising an 8-bit configuration register, a random-access memory (RAM) with a storage capacity of 16 Kbits and having the function of programme memory, a random-access memory (RAM) with a storage capacity of 2 Kbits and a real-time clock, in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters :

PC 87323 VF

PC 87911

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 71> ID="2">*45> ID="3">Microcontroller or microcomputer of C-MOS technology, with a processing capacity of 8 bits, providing keyboard control functions, comprising a read only memory, non-programmable (ROM) with a storage capacity of 2 Kbits, random-access memories (RAMs) with a total storage capacity of 2 Kbits, a real-time clock, address registers and input/output buffers, in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

82C113

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 71> ID="2">*46> ID="3">Microcontroller or microcomputer of C-MOS technology, with a processing capacity of 8 bits, providing vertical deflection functions for a cathode-ray tube, comprising 2 arithmetic-logic units (ALUs), 4 read only memories, non-programmable (ROMs) with a total storage capacity of 11,7 Kbits, 2 random-access memories (RAMs) with a total storage capacity of 1 Kbit, an analogue-to-digital converter and 2 digital-to-analogue converters, in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

CXD 2018

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 71> ID="2">*47> ID="3">Microcontroller or microcomputer of C-MOS technology, with a processing capacity of 8 bits, comprising a read only memory, non-programmable (ROM) with a storage capacity of 48 or 64 Kbits, a random-access memory (RAM) with a storage capacity of 1 Kbit or 1 536 bits and 6 digital-to-analogue converters, in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

PCA 84C640

PCA 84C840

PCA 84C841

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 73> ID="2">*06> ID="3">Microcontroller or microcomputer of C-MOS technology, with a processing capacity of 16 bits, comprising a static random-access memory (S-RAM) with a storage capacity of 8 Mbits and having the function of programme memory, a static random-access memory (S-RAM) with a storage capacity of 8 Kbits, a system integration module (SIM), an anlogue-to-digital converter a timer, 2 serial interface circuits, in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

MC 68HC16Z1 (SC415902FV)

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 73> ID="2">*08> ID="3">Microcontroller or microcomputer of C-MOS technology, with a processing capacity of 16 bits, comprising a read only memory, non-programmable (ROM) or a programmable, non-erasable, read only memory (PROM) or a UV erasable, programmable, read only memory (EPROM) with a storage capacity of 128, 192, 256, 384 or 480 Kbits, a random-access memory (RAM) with a storage capacity of 4, 8 or 16 Kbits and an 8-bit analogue-to-digital converter, in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

M 37702 E2

M 37702 E4

M 37702 E8

M 37702 M2

M 37702 M8

M 37702 M3B

M 37702 M4

M 37702 M6L

M 37702 MDB

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 73> ID="2">*10> ID="3">Microcontroller or microcomputer of C-MOS technology, with a processing capacity of 16 bits, for controlling dataflows between a twisted-pair-cable local area network (LAN) and a central processing unit (CPU), comprising a read only memory, non-programmable (ROM) with a storage capacity not exceeding 32 Kbits, a random-access memory (RAM) with a storage capacity not exceeding 128 Kbits, in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

SMC 83C825

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 73> ID="2">*11> ID="3">Microcontroller or microcomputer of C-MOS technology, with a processing capacity of 16 bits, comprising a multiplier/accumulator (MAC), an arithmetic-logic shifter, a static random-access memory (S-RAM) with a storage capacity of 48 Kbits and having the function of programme memory, a static random-access memory (S-RAM) with a storage capacity of 16 Kbits and a programmable timer, in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

ADSP 2101

ADSP 2102BS-50

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 73> ID="2">*12> ID="3">Microcontroller or microcomputer of C-MOS technology, with a processing capacity of 16 bits, comprising an 8-bit or 16-bit external data-bus, a random-access memory (RAM) with a storage capacity of 16 Kbits and having the function of programme memory, a random-access memory (RAM) with a storage capacity of 16 Kbits, in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

DSP 56116

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 73> ID="2">*13> ID="3">Microcontroller or microcomputer of C-MOS technology, with a processing capacity of 16 bits, providing local network bus communication control, comprising a random-access memory (RAM) with a storage capacity of 2 Kbits, 2 read only memories, non-programmable (ROMs) or 2 programmable, non-erasable, read only memories (PROMs) or 2 UV erasable, programmable, read only memories (EPROMs) with a total storage capacity of 56 or 128 Kbits and a serial-port interface circuit, in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

TMS 8370C03

TMS 8370C73

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 74> ID="2">*04> ID="3">Microcontroller or microcomputer of C-MOS technology, with a processing capacity of 32 bits, comprising a read only memory, non-programmable (ROM) with a storage capacity of 4 Mbits, a random-access memory (RAM) with a storage capacity of 1 Mbit, a display control and drive circuit, an interrupt controller, a keyboard controller, a memory mapping control circuit and a clock generator, in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

SC 414181FG16

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 74> ID="2">*05> ID="3">Microcontroller or microcomputer of C-MOS technology, with a processing capacity of 19 bits, providing audio functions and transmit/receive functions of a digital cordless telecommunication system, in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

AM 79C420

SC 14400

SC 14401

SC 14420

SC 14460

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 74> ID="2">*14> ID="3">Microcontroller or microcomputer of C-MOS technology, with a processing capacity of 32 bits, comprising 16-bit data-buses and a 16 × 16 bits multiplier with 32 bits results, in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters :

TMS 320M520

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 75> ID="2">*23> ID="3">Microcontroller or microcomputer of C-MOS technology, with a processing capacity of 40 bits or more, in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

CS 4920

DSP 56 000

DSP 56001

DSP 56002

DSP 56166

DSP 9 6002

TMS 320C500

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 77> ID="2">*03> ID="3">Message handler circuit based on gate arrays of C-MOS technology, providing multi-channel communication over a bidirectional bus, comprising a microprocessor interface circuit, a voice/data receiver and transmitter, in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

QMV 253

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 77

ex 8542 11 79> ID="2">*05

*07> ID="3"> Disc storage unit control circuit based on gate arrays or standard cells of C-MOS technology, in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures or of figures and letters:

0391343

6006Z1

6008

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 79> ID="2">*04> ID="3">Interface and control circuit based on standard cells of C-MOS technology, capable of controlling driver circuits for an inkjet printhead, in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

1MK5-0201

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 79> ID="2">*05> ID="3">Interface and control circuit based on standard cells of C-MOS technology, capable of data organisation and transfer to an inkjet printhead, in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

1MK9-0201

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 79> ID="2">*06> ID="3">Interface and control circuit based on standard cells of C-MOS technology, capable of interfacing between a disc storage unit, a central processing unit (CPU), a dynamic random-access read/write memory (D-RAM) and a local bus, in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

68G0960

68G1002

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 79> ID="2">*08> ID="3">Audio signal processing circuit based on standard cells of C-MOS technology, comprising a read only memory, non-programmable (ROM), a random-access memory (RAM), 4 analogue-to-digital converters, a serial interface, a frequency decimation circuit and a loudspeaker overload protection circuit, in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

VY 27051

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 82> ID="2">*02> ID="3">Printer control circuit of C-MOS technology, comprising a dynamic random-access memory (D-RAM) control circuit, direct memory access (DMA) registers, registers for communication between 2 microprocessors and a static random-access memory (S-RAM), in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

TMX 35C438

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 82> ID="2">*05> ID="3">Display controller or character generator for liquid crystal displays (LCDs) or light-emitting diodes (LEDs), in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

HD 61830

LH 5821

MC 141540

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 82> ID="2">*06> ID="3">Bus controller of C-MOS technology, in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures or figures and letters:

2782654

69G1705

82308

82309

82355

82358

82374EB

82434LX

82 C 101

82 C 103

82 C 211

82 C 288

82 C 301

82 C 320

82 C 362

82 C 461

82 C 463

82 C 465

82 C 493

82 C 496

82 C 591

82 C 597

82 C 801B

82 C 802G

82 C 822

82 C 88

CA 91C014

ET 6 000

GC 181

HT 216

HT 321

L1A 4601

MSM 6307

R 4220

R 4230

TACT 83443

VAC 068

VIC 068

VIC 64

VL 82 C 331

VY 86 C 410

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 82> ID="2">*10> ID="3">Video controller, with at least one of the following functions:

a) cathode-ray tube controlling,

b) liquid crystal display (LCD) driving or controlling,

c) graphics controlling,

d) colour selection controlling,

in the form of a monolithic integrated circuit, either contained in a housing or fixed on a plastic support, and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

a) 82 C 434

a) 82 C 453

a) 86 C 805

a) 86 C 911

a) 86 C 928

a) AM 8052

a) ATI 68800

a) CL-GD542

a) CL-GD543

a) CRT 9007

a) CRT 97 C 11

a) ET 4 000

a) M 50452

a) MB 89321

a) MB 89322

a) TVGA 8900C

a) V 6363

a) VY 86 C 310

a) WD 90 C 10

a) WD 90 C 11

a) WD 90 C 30

a) WD 90 C 31

a) WD 90 C 33

b) 82 C 425

b) CL-GD6410

b) COP 472

b) H 5050

b) HD 44100

b) HD 44780

b) HD 66100

b) HD 61104T

b) HD 61105T

b) HD 66106T

b) HD 66107T

b) LC 7582

b) M 6003

b) M 6004

b) MSM 5259

b) MSM 5298

b) MSM 5299

b) MSM 5839

b) PCF 8576

b) SED 1520

b) SED 1521

b) SED 1600

b) SED 1610

b) T 6A39

b) T 6A40

b) TMS 3491

b) TMS 3492

b) TMS 57202

b) TMS 57206

b) TMS 57207

b) TMS 57210

b) TMS 57212

b) TMS 57213

b) V 6116

b) V 6117

b) V 6118

b) V 6120

b) V 6355-DJ

b) WD 90C24

c) 82 C 431

c) 82 C 435

c) 82 C 441

c) 82 C 451

c) 82 C 452

c) 84 C 451

c) AVGA1

c) CL-GD5410

c) HT 208

c) HT 209

c) L 64845

c) NCR 77C22

c) OTI 067

c) PEGA

c) PVGA

c) WD 90 C 00

d) 82 C 433

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 82> ID="2">*36> ID="3">Control circuit or control and management circuit, comprising 2 direct memory access (DMA) controllers and 2 interrupt controllers, in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

82360SL

82C206

82C316

82C491

82C593

GC 101 SX

HT 101 SX

VL 82 C 480

VL 82 C 486

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 82> ID="2">*39> ID="3">DC motor control circuit, with at least one of the following caracteristics:

a) for a brushless three-phase motor, of BiMOS technology, operating at a single power supply of 5 V, comprising outputs with an impedance of 1,4 ohms at a power of 1 A,

b) of C-MOS technology, comprising a circuit to monitor power supply, a circuit to store and decode addresses and to multiplex data, an 8-bit digital-to-analogue converter and 5 amplifiers,

c) of N-MOS (including H-MOS) technology, comprising a digital 16-bit filter,

in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

a) 9990CS

b) GC 27

b) GC 45

c) LM 629

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 82> ID="2">*89> ID="3">Line decoder/driver of C-MOS technology, with an output voltage of 30, 35 or 60 V at 500 mA, in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

MC 34142

UCN 5816

UCN 5817

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 82> ID="2">*92> ID="3">Control circuit of C-MOS technology, capable of driving 25 lamps or a 7-segment light-emitting diode (LED) display, having a drive voltage of 4,5 V or more but not exceeding 6 V, in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

MC 14489

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 82> ID="2">*93> ID="3">Control circuit of C-MOS technology, for the firing of printhead pens, in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters :

1TY5-0001

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 82> ID="2">*94> ID="3">Control circuit of C-MOS technology, capable of managing the reduction of power consumption of a microprocessor or of other peripheral units, in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters :

1028 CP

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 84> ID="2">*02> ID="3">Pulse-code-modulation line interface circuit of C-MOS technology, comprising a line transmitter, a line receiver, an encoder/decoder, a jitter attenuator, a clock and data recovery circuit, in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

CS 61574

CS 61575

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 84> ID="2">*14> ID="3">Interface or interface and control circuit of C-MOS technology, with at least one of the following functions:

a) for signals between a peripheral disc memory unit and a central processing unit (CPU),

b) for controlling data communication between a system bus interface and peripheral units, comprising a system interface gate, a microprocessor gate and a direct memory access (DMA) gate,

c) for interfacing and controlling the data sequence between an automatic data-processing machine and a disc storage unit,

d) for read/write data between a digital-audio-tape storage unit and a microprocessor,

in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

a) 82C611

a) AIC 560 L

a) DP 8466

a) M 5213

a) M 5215

a) OMTI 5080 (OMTI 2 0508)

a) OMTI 5090 (OMTI 2 0509)

a) WD 11 C 00-17

a) WD 14 C 00-17

a) WD 61 C 40

b) 1TU1-0301

b) 1TU2-0301

b) 1TV3-0301

b) 1TV3-0302

b) 1TV4-0301

b) 1TV4-0302

c) 32C260

c) AIC 6060

d) 1XK2-0301

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 84> ID="2">*46> ID="3">Control and interface circuit of C-MOS technology, comprising 48 mA drivers, registers, an 18- or 32-bit direct memory access (DMA) interface, an 8- or 32-bit microprocessor bus and a parity generator and checker, in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

AM53C974

NCR 53C94

NCR 53C95

NCR 53C96

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 86> ID="2">*03> ID="3">Video-line comb filter of C-MOS technology, capable of digital signal luminance/chrominance separation, in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

CXD 2024

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 86> ID="2">*04> ID="3">Digital-to-analogue and analogue-to-digital converter of C-MOS technology, comprising an analogue modulator capable of oversampling signals at a frequency of 1 024 MHz and a filter capable of sampling signals from a digital modulator at a frequency of 512 kHz, in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

MSP 58C20

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 86> ID="2">*07> ID="3">Multiplexer/demultiplexer of C-MOS technology, capable of converting 28 independent signals, comprising a microprocessor bus interface circuit and a random-access memory (RAM) with a storage capacity of 256 bits, in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

TXC 03301

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 86> ID="2">*08> ID="3">Subscriber line audio-processing circuit (SLAC) of C-MOS technology, comprising 2 digital signal processors, at least 1 analogue-to-digital converter and at least 1 digital-to-analogue converter, in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

Am 7901

Am 7905

Am 79C02

Am 79C03

Am 79C04

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">7"> ID="1">ex 8542 11 86> ID="2">*09> ID="3">8-, 9-, 10-, 16- or 18-bit register of C-MOS technology, in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

74FCT162374

74FCT162823BT

74FCT162823CT

74FCT16374

74FCT16823BT

74FCT16823CT

74FCT374

74FCT534

74FCT574

Am 29C818A

Am 29C821A

Am 29C823A

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 86> ID="2">*10> ID="3">Transmitter of C-MOS technology, operating with a single power supply of + 5 V and with a data transfer rate per second of 120 Kbits or more at an output voltage of 5 V, comprising not more than 5 transmitters, in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

MAX 200

MAX 204

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 86> ID="2">*12> ID="3">Encoder/decoder of BiMOS technology, providing data conversion and separation and a data transfer rate of 50 Mbits per second, comprising a read pulse detector and a frequency synthesiser/synchroniser, in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

HD 153031 RF

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 86> ID="2">*16> ID="3">Phase-locked loop (PLL) clock circuit of C-MOS technology, capable of synchronisation or multiplication of frequencies not exceeding 160 MHz, in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

74 FCT 3888915

74 FCT 88915

MC 88915

MC 88916

MC 88920

MC 88PL117

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 86> ID="2">*21> ID="3">Signal processing circuit of C-MOS technology, providing delay of scanning periods for horizontal image lines of a charge-coupled (CCD) image sensor, comprising a clockgenerator, a clamp circuit and a sample and hold circuit, in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

CXL 1517

CXL 5504

MN 3860SA

MN 3861SA

MSM 6819MS-K

MSM 6834MS-K

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 86> ID="2">*23> ID="3">Circuit of BiMOS technology, for the recording and reproduction of data, operating at a rate not exceeding 12 Mbits/sec, comprising an encoding circuit, a decoding circuit, an analogue-to-digital converter, a digital equaliser filter and a random-access memory (RAM), in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

64G0166 (8189294)

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 86> ID="2">*27> ID="3">8-bit digital-to-analogue converter of C-MOS technology, capable of converting serial data input towards 36 output channels, in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

MB 88344B

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 86> ID="2">*29> ID="3">Transmitter/receiver of C-MOS technology, with at least one of the following characteristics:

a) capable of connecting (terminating) line rates of 8 448 or 34 368 Kbits per second,

b) of the 8-, 16- or 32-bit bidirectional type,

c) operating with a single power supply of + 5 V and a supply current not exceeding 2 mA, comprising 2 transmitters and 2 receivers,

d) operating with a single power supply of + 5 V, comprising at least 6 transmitters and at least 8 receivers,

e) operating with a single power supply of + 5 V and of + 9 V or more but not exceeding + 13,2 V and with a data transfer rate per second of 120 Kbits or more at an output voltage of 5 V, comprising 2 transmitters and 2 receivers,

f) having a supply current not exceeding 3 mA, comprising 2 driver circuits and 3 receivers,

g) with a propagation delay not exceeding 22 ns,

h) for signals between an encoder/decoder using Manchester code (MED) or an interface unit and a twisted pair cable or a coaxial cable in a local area network (LAN),

in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures or of figures and letters:

a) TXC 02 050

b) 29 C 833 A

b) 29 C 853 A

b) 74 AC 16472

b) 74 AC 16646

b) 74 AC 16657

b) 74 ACT 11245

b) 74 ACT 16245

b) 74 ACT 16470

b) 74 ACT 16863

b) 74 FCT 1 62500

b) 74 FCT 1 62501

b) 74 FCT 1 62543

b) 74 FCT 162646

b) 74 FCT 162652

b) 74 FCT 162952

b) 74 FCT 16500

b) 74 FCT 16501

b) 74 FCT 16543

b) 74 FCT 16646

b) 74 FCT 16652

b) 74 FCT 16952

b) 74 FCT 245

b) 74 FCT 645

c) MAX 220

d) MAX 244

d) MAX 245

d) MAX 246

d) MAX 247

d) MAX 248

d) MAX 249

e) MAX 201

f) LTC 902

g) 29 FCT 52

g) 82503

g) DS7517BT

h) 83C92

h) 83C94

h) Am 79C98

h) MC 145572

h) TMS 380C60

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 86> ID="2">*36> ID="3">Encoder/decoder of C-MOS technology, capable of encoding, decoding and interfacing serial signals having a rate of 13 Kbits per second and audio signals having a rate of 104 Kbits per second, comprising an analogue-to-digital converter, a digital-to-analogue converter, digital-pulse-code-modulation filters and an echo cancellation circuit, in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

VP 22020

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 86> ID="2">*37> ID="3">Delineation circuit of C-MOS technology, capable of extracting and inserting asynchronous transfer mode (ATM) cells from and into a line interface signal, in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

TXC 05150

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 86> ID="2">*39> ID="3">Clock generator, in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures or figures and letters:

32 D4661CL

82 C 402

AV 9129

Bt 438

Bt 439

CXD 1035

CXD 1252

CXD 1255

CY7B991

CY7B992

DP 8531

DP 8532

DP 83241

ICD 2023

ICD 2027

ICD 2028

ICS 1394

ICS 2494

ICS 90C64

LZ 93F31

LZ 93F33

LZ 93N61

MK 1418

MK 1442

MK 1448

MK 1450

MSM 5547

PCLK 1

PCLK 2

SC 11410

SC 11411

SC 11412

TCK 9002

WD 90 C 61

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 86> ID="2">*40> ID="3">Data-buffer or data/address-buffer circuit, in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

82C592

82C601

82C602

FB 2020

GC 102

HT 102

VL 82 C 332

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 86> ID="2">*44> ID="3">Data or image compression/decompression circuit of C-MOS technology, in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

1XH4-0301

1XK6-0301

1XY9-0001

74 ACT 6340

CL 450

CL 550

CL 950

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 86> ID="2">*45> ID="3">Adaptive differentiated pulse-code-modulation encoder/decoder of C-MOS technology, comprising a pulse-code-modulation encoder/decoder interface circuit, a transmit and receive control circuit, a microprocessor bus interface circuit and a parallel port, in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

VP 06565

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 86> ID="2">*53> ID="3">Signal generator of C-MOS technology, providing synchronous pulse generation for a charged coupled (CCD) image sensor, in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

CXD 1030

CXD 1217

LZ 93B53

LZ 93N43

LZ 95G52

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 86> ID="2">*54> ID="3">Modulator/demodulator of C-MOS technology (C-MOS-Modem), only for half duplex transfer of image telegraphy (facsimile) at a rate of 300, 2 400, 4 800, 7 200 or 9 600 bits per second, in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

TC 35128

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 86> ID="2">*59> ID="3">Signal processing circuit of C-MOS technology, capable of processing video-signals from a charge-coupled (CCD) image sensor, in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

CXA 1810

CXD 2100

CXD 2150

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 88> ID="2">*01> ID="3">Wafer, not yet cut into chips, of gallium arsenide (GaAs) semiconductor material, consisting only of clock and data recovery circuits, for use in the manufacture of goods of subheading 8542 11 98 contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

GD 16042

GD 16043

or

- other identification markings relating to devices complying with the abovementioned description (26)()> ID="4">0"> ID="1">ex 8542 11 88> ID="2">*02> ID="3">Wafer, not yet cut into chips, of gallium arsenide (GaAs) semiconductor material, consisting only of multiplexer circuits, capable of multiplexing 4 data flows into a single data flow, comprising a phase-locked loop (PLL) circuit and laser diode drivers, for use in the manufacture of goods of subheading 8542 11 98 contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

GD 16054

or

- other identification markings relating to devices complying with the abovementioned description (27)()> ID="4">0"> ID="1">ex 8542 11 88> ID="2">*03> ID="3">Wafer, not yet cut into chips, of gallium arsenide (GaAs) semiconductor material, consisting only of transmitter/receivers, providing serial data communication at a rate of 622 Mbits per second, for use in the manufacture of goods of subheading 8542 11 98 contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

GD 16064

or

- other identification markings relating to devices complying with the abovementioned description (28)()> ID="4">0"> ID="1">ex 8542 11 88> ID="2">*04> ID="3">Wafer, not yet cut into chips, of gallium arsenide (GaAs) semiconductor material, consisting only of multiplexers or demultiplexers, providing differential ECL level data input/output at a rate of 622 Mbits per second and TTL input/output signals at a rate of 78 Mbits per second, for use in the manufacture of goods of subheading 8542 11 95 contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

GD 16131

GD 16132

or

- other identification markings relating to devices complying with the abovementioned description (29)()> ID="4">0"> ID="1">ex 8542 11 88> ID="2">*05> ID="3">Wafer, not yet cut into chips, of gallium arsenide (GaAs) semiconductor material, consisting only of dual buffers for ECL/TTL level signals, for use in the manufacture of goods of subheading 8542 11 98 contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

GD 10225

or

- other identification markings relating to devices complying with the abovementioned description (30)()> ID="4">0"> ID="1">ex 8542 11 89> ID="2">*10> ID="3">Transmitter/receiver of gallium arsenide (GaAs) semiconductor material, providing synchronous/asynchronous data communication at a rate per second of 622 Mbits or more but not exceeding 2,5 Gbits, in the form of a monolithic integrated circuit not contained in a housing (chip), for use in the manufacture of goods of subheading 8542 11 98 contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of letters:

GIGA BOA

GIGA MATCH

or

- other identification markings relating to devices complying with the abovementioned description (31)()> ID="4">0"> ID="1">ex 8542 11 89> ID="2">*20> ID="3">Measurement circuit of gallium arsenide (GaAs) semiconductor material, capable of measuring signal propagation times on transmission lines, comprising 2 asynchronous counters, 4 comparators, a clock generator and an oscillator, in the form of a monolithic integrated circuit not contained in a housing (chip), for use in the manufacture of goods of subheading 8542 11 98 contained in a housing bearing:

- an identification marking consisting of or including the following combination of letters:

GIGA TDR

or

- other identification markings relating to devices complying with the abovementioned description (32)()> ID="4">0"> ID="1">ex 8542 11 89> ID="2">*30> ID="3">Clock and data recovery circuit of gallium arsenide (GaAs) semiconductor material, in the form of a monolithic integrated circuit not contained in a housing (chip), for use in the manufacture of goods of subheading 8542 11 98 contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

GD 16042

GD 16043

or

- other identification markings relating to devices complying with the abovementioned description (33)()> ID="4">0"> ID="1">ex 8542 11 89> ID="2">*40> ID="3">Multiplexer of gallium arsenide (GaAs) semiconductor material, capable of multiplexing 4 data flows into a single data flow, comprising a phase-locked loop (PLL) circuit and laser diode drivers, in the form of a monolithic integrated circuit not contained in a housing (chip), for use in the manufacture of goods of subheading 8542 11 98 contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

GD 16054

or

- other identification markings relating to devices complying with the abovementioned description (34)()> ID="4">0"> ID="1">ex 8542 11 89> ID="2">*50> ID="3">Divider/detector circuit of gallium arsenide (GaAs) semiconductor material, capable of synthesizing frequencies in the range of 50 MHz to 1 700 MHz, comprising a prescaler, a frequency divider and a phase/frequency detector, in the form of a monolithic integrated circuit not contained in a housing (chip), for use in the manufacture of goods of subheading 8542 11 98 contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

GIGA FSS

or

- other identification markings relating to devices complying with the abovementioned description (35)()> ID="4">0"> ID="1">ex 8542 11 90> ID="2">*21> ID="3">Static random-access memory of bipolar technology (bipolar S-RAM), with a storage capacity not exceeding 1 Kbit, in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures or of figures and letters:

82 S 09

93422

93425

MBM 93419

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 90> ID="2">*74> ID="3">Programmable, non-erasable, read only memory (PROM) of bipolar technology, with a storage capacity not exceeding 64 Kbits, in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures or figures and letters:

18 S 030

24 S 10

24 S 41

24 S 81

28 L 42

28 S 166

28 S 42

28 S 86

27 PS 191

27 PS 291

27 S 12

27 S 13

27 S 191

27 S 291

28 L 22

28 LA 22

28 L2XMFC

29613

29770

29771

38510

5305

5306

5308

5309

53 S 240

53 S 241

54 S 570

54 S 571

5604

5624

6305

6306

6308

6309

6335

6336

63 S 240

63 S 241

63 S 3281

7053

7058

74 S 570

74 S 571

76 LS 03

7620

7621

82 S 114

82 S 130

82 S 131

93436

93446

Am 27S43

MB 7115

MB 7116

MB 7117

MB 7118

MB 7141

MB 7142

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 95> ID="2">*01> ID="3">Control circuit of bipolar technology, capable of driving laser diodes or other light-emitting diodes (LEDs), in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

IDA 07318

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 95> ID="2">*62> ID="3">Driver circuit of gallium arsenide (GaAs) semiconductor material, for controlling laser diodes or other light-emitting diodes (LEDs), in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

16G075

16G076

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 98> ID="2">*01> ID="3">Transmitter of bipolar technology, providing encoding/conversion of parallel data/commands into serial format, in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

AM 79168

AM 7968

AM 79865

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 98> ID="2">*02> ID="3">Audio digital-to-analogue converter of bipolar technology, with a dynamic range of 96 dB or more, comprising an internal voltage reference, in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

PCM 63P

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 98> ID="2">*05> ID="3">Receiver of bipolar technology, providing decoding/conversion of serial data/commands into parallel format, in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

AM 79169

AM 7969

AM 79866

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 98> ID="2">*06> ID="3">Transmitter or receiver of bipolar technology, capable of serial data communication at a rate of 110 Mbits or more but not exceeding 1,4 Gbits per second, in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

HDMP 1002

HDMP 1004

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 98> ID="2">*27> ID="3">16-bit digital-to-analogue converter of bipolar technology, comprising an internal voltage reference, in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

DAC 712

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 98> ID="2">*28> ID="3">Prescaler of bipolar technology, having an input frequency not exceeding 1,5 GHz and a selectable 64/65 or 128/129 divide ratio, in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

MC 12022

MC 12052

SC 12022

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 98> ID="2">*32> ID="3">Transmitter/receiver of bipolar technology, capable of converting data into serial or parallel format and bidirectional serial data transfer at a rate not exceeding 200 megabytes per second, in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

MC 100SX1451

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 98> ID="2">*33> ID="3">32 × 32-bit differential crosspoint switch of bipolar technology, capable of switching at a data rate per second of 800 Mbits, in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

S 2024

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 98> ID="2">*35> ID="3">Transmitter/receiver of bipolar technology, capable of data transmission over a twisted-pair cable, in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

DP 83220

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 98> ID="2">*36> ID="3">Clock generator/buffer of gallium arsenide (GaAs) semiconductor material, capable of frequency synchronisation or multiplication, in the form of a monolithic integrated circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

GA 1 000

GA 1085

GA 1086

GA 1087

GA 1088

GA 1089

GA 1110

GA 1210

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 10> ID="2">*10> ID="3">Wafer, not yet cut into chips, of gallium arsenide (GaAs) semiconductor material, consisting only of transimpedance amplifiers, operating at a bandwidth of 900 MHz, having a resistance not exceeding 4 kohm, for use in the manufacture of goods of subheading 8542 19 30 contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

GD 16085

or

- other identification markings relating to devices complying with the abovementioned description (36)()> ID="4">0"> ID="1">ex 8542 19 10> ID="2">*20> ID="3">Wafer, not yet cut into chips, of gallium arsenide (GaAs) semiconductor material, consisting only of laser diode control circuits, providing an output current in a range of 10 mA to 70 mA at a power supply of -5 V (±1 %), for use in the manufacture of goods of subheading 8542 19 70 contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

GD 16077

or

- other identification markings relating to devices complying with the abovementioned description (37)()> ID="4">0"> ID="1">ex 8542 19 10> ID="2">*30> ID="3">Wafer, not yet cut into chips, of gallium arsenide (GaAs) semiconductor material, consisting only of amplifiers with a typical output power of 25 dBm in a frequency range of 1 850 MHz to 1 950 MHz, comprising radiofrequency (RF) switches, for use in the manufacture of goods of subheading 8542 19 30 contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

GD 12033

or

- other identification markings relating to devices complying with the abovementioned description (38)()> ID="4">0"> ID="1">ex 8542 19 10> ID="2">*40> ID="3">Wafer, not yet cut into chips, of gallium arsenide (GaAs) semiconductor material, consisting only of dual amplifiers with a typical gain of 18 dB at a frequency of 1,5 GHz, for use in the manufacture of goods of subheading 8542 19 30 contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

GD 10012

or

- other identification markings relating to devices complying with the abovementioned description (39)()> ID="4">0"> ID="1">ex 8542 19 20> ID="2">*30> ID="3">Control circuit of C-MOS technology, capable of driving inductive and resistive loads, having 4 outputs with a current of 2 A or more but not exceeding 7,2 A, in the form of a monolithic integrated analogue circuit not contained in a housing (chip), for the manufacture of motor control systems (40)()> ID="4">0"> ID="1">ex 8542 19 20> ID="2">*40> ID="3">Transimpedance amplifier of gallium arsenide (GaAs) semiconductor material, operating at a bandwidth not exceeding 2,7 GHz, in the form of an monolithic integrated analogue circuit not contained in a housing (chip), for use in the manufacture of products falling within subheading 852711 90 (41)()> ID="4">0"> ID="1">ex 8542 19 20> ID="2">*50> ID="3">Differential amplifier of bipolar technology, with a gain not exceeding 375 and a nominal input voltage of 1 mVpp, in the form of a monolithic integrated analogue circuit not contained in a housing (chip), for use in the manufacture of products falling within heading No 8471 (42)()> ID="4">0"> ID="1">ex 8542 19 20> ID="2">*60> ID="3">Amplifier with an input current not exceeding 80 nA, in the form of a monolithic integrated analogue circuit not contained in a housing (chip), for use in the manufacture of goods of subheading 8542 19 30 contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

INA 101

OPA 111

OPA 121

OPA 2111

or

- other identification markings relating to devices complying with the abovementioned description (43)()> ID="4">0"> ID="1">ex 8542 19 20> ID="2">*70> ID="3">Amplifier with a programmable gain factor, in the form of a monolithic integrated analogue circuit not contained in a housing (chip), for use in the manufacture of goods of subheading 8542 20 50 contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

3606G

or

- other identification markings relating to devices complying with the abovementioned description (44)()> ID="4">0"> ID="1">ex 8542 19 30> ID="2">*01> ID="3">Intermediate frequency (IF) or FM amplifier of bipolar technology, comprising a mixer, a receive signal strength indicator (RSSI), a detector and an oscillator in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

CXA 1343

CXA 1744R

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 30> ID="2">*02> ID="3">Microwave amplifier of bipolar technology, with a nominal gain of 18 dB at 0,5 GHz or 22,5 dB at 1 GHz and 32,5 dB at 0,1 GHz or 26 at 1,5 GHz, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

A-06

A-08

N10

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 30> ID="2">*03> ID="3">Quadruple amplifier of C-MOS technology, with an input current not exceeding 20 pA, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

LMC 660

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 30> ID="2">*05> ID="3">Amplifier of bipolar technology, with a typical supply current not exceeding 1 mA at a voltage of 12 V and a temperature of 25 °C, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

LM 1964

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 30> ID="2">*06> ID="3">Amplifier of bipolar technology, with a typical operating frequency of 1,3 GHz, 2,3 GHz or 3 GHz and a single supply voltage of 5 V, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

C1D

C1E

C1F

C1G

C1H

C1J

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 30> ID="2">*07> ID="3">Amplifier with an off-set voltage not exceeding 1 000 mV at 25 °C, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

LT 1006

LT 1028

MC 33272

MC 33274

OPA 275

OPA 628

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 30> ID="2">*08> ID="3">Amplifier of gallium arsenide (GaAs) semiconductor material, having a nominal gain of 18 or more but not exceeding 30 dB and a frequency range of not more than 1,9 GHz, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

16G071

16G072

16G074

MGF 7131

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 30> ID="2">*09> ID="3">Audio amplifier of bipolar technology, with a typical gain of 47 dB in a frequency range of 20 Hz to 20 kHz, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

TA 201S

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 30> ID="2">*10> ID="3">Amplifier, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

C 05

V 35

or

- other identification markings relating to devices complying with the abovementioned description

These devices are for use in the manufacture of products falling within subheading 9021 40 00 (45)()> ID="4">0"> ID="1">ex 8542 19 30> ID="2">*11> ID="3">Transimpedance amplifier of bipolar technology, with a typical gain of 72,5 dB at a frequency of 750 MHz, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

ITA 12318

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 30> ID="2">*15> ID="3">Amplifier with an input current not exceeding 80 nA, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

INA 101

OPA 27

OPA 37

OPA 111

OPA 121

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 30> ID="2">*25> ID="3">Variable amplifiers for the range of frequencies of 10 Hz or more but not exceeding 30 kHz, with a gain of 85 dB or more, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

M 5218

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 30> ID="2">*30> ID="3">Dual or quadruple amplifier operating with a supply current per amplifier not exceeding 400 mA, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

014B

LT 1078

LT 1079

LT 1178

LT 1179

MC 14573

MC 14574

MC 14575

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 30> ID="2">*40> ID="3">Thermocouple amplifier for instrumentation control at temperatures from 0 to 50 °C, incorporating an alarm system, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

AD 594

AD 595

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 30> ID="2">*80> ID="3">Amplifier with a programmable gain factor, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

PGA 102

PGA 202

PGA 203

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 50> ID="2">*15> ID="3">Current and voltage regulator of C-MOS technology, operating on a battery input voltage of 0,85 V or more but not exceeding 5,5 V or an unregulated input voltage of 7 V or more but not exceeding 20 V, providing a selectable output voltage of 3,3 V (±0,13 V) or 5 V (±0,20 V), in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

MAX 717

MAX 718

MAX 719

MAX 720

MAX 721

MAX 722

MAX 723

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 50> ID="2">*20> ID="3">Voltage regulator with an input voltage range of 3 V or more but not exceeding 60 V and a quiescent current of 6 or 7 mA, comprising an internal 1,25 A, 2,5 A, 4 A or 5 A switch circuit, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

LT 1070

LT 1071

LT 1170

LT 1171

LT 1172

LT 1271

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 50> ID="2">*25> ID="3">Voltage regulator, providing reverse battery protection, operating with an input voltage not exceeding 30 V and a quiescent current not exceeding 70 mA at zero load, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

LT 1129

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 50> ID="2">*35> ID="3">Voltage regulator, with a quiescent current not exceeding 75 mA and a dropout voltage not exceeding 0,6 V at an output current of 750 mA, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

TL750M

TL751M

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 50> ID="2">*45> ID="3">Voltage regulator, having an output voltage of 12 V (±3 %), a quiescent current not exceeding 10 mA and a dropout voltage not exceeding 22 V at an output current of 50 mA, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

CS 8109 (7032FB)

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 50> ID="2">*55> ID="3">Voltage regulator, with an input voltage of -15 V or more but not exceeding 60 V, an output voltage of 3,2 V or more but not exceeding 5,2 V, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

LT 1142

LT 1149

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 50> ID="2">*60> ID="3">Voltage regulator with an input voltage range of 4,75 V or more but not exceeding 60 V and a quiescent current not exceeding 10 mA, comprising a 1 A switch circuit and an oscillator with a fixed frequency of 52 kHz, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

LM 1575

LM 2575

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 50> ID="2">*65> ID="3">Voltage regulator, having an output voltage of 1 V or more but not exceeding 8 V, a typical quiescent current of 400 or 500 mA, a typical dropout voltage of 170 mV at an output current of 60 mA, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

TK 115

TK 116

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 50> ID="2">*70> ID="3">Voltage and current regulator of bipolar technology, capable of generating 3 ouput currents of respectively 7,5 mA, 50 mA and 750 mA at an ouput voltage of 5 V (±5 %), in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures:

34 992

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 50> ID="2">*75> ID="3">Voltage regulator, having an output voltage of 3,9 V (±3 %), a typical output current of 40 mA at an input voltage of 6 V and a typical operating current of 2,2 mA, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

SCI 7710Y-KA

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 50> ID="2">*80> ID="3">Adjustable voltage regulator, with a typical output current of 4 A, 6,5 A or 9,5 A at an input to output differential voltage of 5 V and a dropout voltage not exceeding 1,5 V, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

LT 1083

LT 1084

LT 1085

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 60> ID="2">*03> ID="3">Control circuit of bipolar technology, for driving DC motors with brushes, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

BA 6109

BA 6209

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 60> ID="2">*04> ID="3">Three-phase DC motor control circuit of BiMOS technology, comprising a Hall effect threshold detection circuit, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures:

1323454

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 60> ID="2">*05> ID="3">Control circuit of C-MOS technology, for monitoring the voltage of microprocessors, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

DS 1231

DS 1232

H 6006

H 6052

H 6060

H 6061

MN 1380

MN 13801

MN 13802

MN 1381

MN 13811

MN 13812

MN 13821C

MN 13822C

MN 1382C

V 7039

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 60> ID="2">*07> ID="3">Control circuit of bipolar technology, capable of driving N-MOS transistors, with a standby current not exceeding 3 mA, comprising an overvoltage shutdown circuit and a charge pump, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

MC 33091

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 60> ID="2">*08> ID="3">Current-control circuit of bipolar technology, capable of driving a continuous output current of 2 A, having an output-error detection function, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

PBD 3548

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 60> ID="2">*10> ID="3">Circuit for driving current in a winding of linear motors or motors with rotating arms, of bipolar technology, operating with an output voltage not exceeding 45 V at an output current not exceeding 1,8 A, in form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

PBL 3717

PBL 3770

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 60> ID="2">*11> ID="3">Circuit for driving linear motors or motors with rotating arms, of bipolar technology, working with an output voltage not exceeding 45 V at an output current not exceeding 1 A, comprising a clock generator, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures or of figures and letters:

34993

PBL 3771

PBL 3772

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 60> ID="2">*12> ID="3">Brushless three-fase DC motor control circuit of bipolar technology, operating with an input current of 1 mA and having an input off-set current of 0,1 mA at an input off-set voltage of 5 mV, comprising a thermal shutdown circuit, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

HA 13490

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 60> ID="2">*15> ID="3">Control circuit of C-MOS technology, capable of amplifying/inverting voltage levels to drive vertical lines of a charge-coupled (CCD) image sensor, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

CXD 1267

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 60> ID="2">*16> ID="3">DC motor control circuit of bipolar technology, providing an output current of 2 A at an output saturation voltage of 3,2 V, comprising 3 TTL inputs, 4 transistors in a full bridge configuration and an overvoltage shutdown circuit, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

71004 MB

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 60> ID="2">*17> ID="3">Control circuit, capable of driving inductive or resistive loads, having an output current not exceeding 1,3 A at a supply voltage not exceeding 28 V, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

71004 SB

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 60> ID="2">*18> ID="3">Control circuit of BiMOS technology, capable of driving 2 power field-effect transistors (FETs), in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

LTC 1155

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 60> ID="2">*19> ID="3">Voltage regulator control circuit, operating with a supply voltage of 6 V or more but not exceeding 30 V, providing an output voltage of 5 V (±0,1 V) at an output current of 220 mA, in form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

LT 1432

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 60> ID="2">*20> ID="3">Tachometer or tachometer and speedometer control circuit of BiMOS or bipolar technology, comprising a voltage regulating funktion, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

CS 8190

T 8557G

TB 9226N

TB 9228N

TB 9233N

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 60> ID="2">*21> ID="3">Control circuit of BiMOS technology, capable of driving inductive and resistive loads having 4 outputs with a current of 2 A or more but not exceeding 7,2 A, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures or of figures and letters:

100904

HIP 0082

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 60> ID="2">*22> ID="3">Control circuit of bipolar technology, capable of switching video and audio functions, with 5 inputs and 3 outputs, comprising 2 amplifiers and a mixer of luminance and chrominance signals, in form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

CX 1545

CXA 1855

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 60> ID="2">*24> ID="3">Quadruple fuel injector driver circuit of BiMOS technology, comprising a voltage regulator, an overvoltage detection circuit and an output status control circuit, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

71 00050FSE

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 60> ID="2">*25> ID="3">Control circuit of bipolar technology, capable of driving solenoids, operating with a power supply current not exceeding 50 mA at a supply voltage not exceeding 7 V and a dissipation rate not exceeding 19 W, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

71008SB

71013SB

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 60> ID="2">*26> ID="3">Speedometer and odometer drive and control circuit, whether or not having amplification functions, comprising 4 frequency dividers, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

TA 8906

TB 9207

TB 9208

TB 9212

TB 9230

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 70> ID="2">*50> ID="3">Interface circuit of bipolar technology, capable of converting a differential input signal into a square wave output signal of the same frequency, comprising 4 signal sensor channels and a timer, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

71001AB

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 70> ID="2">*60> ID="3">Interface circuit or interface circuit with control functions, for a local area network (LAN), in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

SMC 83C805

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*01> ID="3">Filter of C-MOS technology, with a programmable cut-off frequency of 4,5 MHz or more but not exceeding 25,2 MHz and a programmable frequency amplification not exceeding 9 dB, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

AD 896

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*02> ID="3">Audio recording/reproducing circuit of C-MOS technology, capable of direct analogue storage of audio data with a duration of 10, 12, 16, 20, 45, 60, 75 or 90 seconds, comprising an electrically erasable, programmable, read only memory (E2PROM) with a storage capacity of 64 Kbits or more but not exceeding 1 Mbit, 3 amplifiers, an automatic gain control circuit and 2 filters, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

ISD 1012A

ISD 1016A

ISD 1020A

ISD 1 200

ISD 1210

ISD 1400

ISD 2545

ISD 2560

ISD 2575

ISD 2590

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*03> ID="3">Analogue signal microprocessor of bipolar technology, providing automatic gain control, read-signal processing and generation of head-positioning signals for magnetic heads in disc storage units, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

SN 28961

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*06> ID="3">Analogue modulator of C-MOS technology, having a dynamic range of 123 dB in a bandwidth of 375 Hz, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

CS 5323

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*07> ID="3">AM and FM receiver of bipolar technology, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

CXA 1030 P

CXA 1240 P

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">7"> ID="1">ex 8542 19 80> ID="2">*09> ID="3">Switch unit of bipolar technology, for audio signals, having a distortion not exceeding 0,005 %, comprising 2 control units and 2 alternating switches, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

TK 15022 Z

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*10> ID="3">Monolithic integrated analogue circuit of bipolar technology, for the overload protection of telephone exchanges, contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures or of figures and letters:

1515

TISP 1072F3

TISP 1082

TISP 2180

TISP 2290

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*11> ID="3">Programmable filter of bipolar technology, with a programmable cut-off frequency of 5 MHz or more but not exceeding 15 MHz and a programmable peak frequency and bandwidth, comprising a seven-pole filter and a differentiator, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

32F8011

32F8012

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*12> ID="3">Dual-tone multi-frequency (DTMF) generator of C-MOS technology, capable of decoding 4-bit binary data and generating 16 tone pairs, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

TP 5088

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*13> ID="3">Frequency converter of gallium arsenide (GaAs) semiconductor material, for the conversion of frequencies of 10,25 GHz or more but not exceeding 12,75 GHz to frequencies of 950 MHz or more but not exceeding 2 050 MHz, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

20070C

AKD 1 2 000

AKD 12010

AKD 12011

AKD 12575

AKD 2 400

AND 2001T4C

FMM 5103

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*14> ID="3">Voltage-to-frequency converter, comprising an amplifier, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

VFC32

VFC100

VFC101

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*15> ID="3">Current-to-voltage converter with an input current not exceeding 100 mA and an output voltage not exceeding -10 V, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

ACF 2101

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*16> ID="3">RMS-converter for computing the root mean square (RMS) value of wave-forms and converting this value to an equivalent direct current or an equivalent direct voltage, in the form of an monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

AD 536 A

AD 636

AD 637

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*17> ID="3">Temperature transducer, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

AD 590

AD 592

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*18> ID="3">Air pressure sensor, operating with a pressure range of 20 kPa to 105 kPa, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

MPX 4100A

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*19> ID="3">Image sensor consisting of a row of not more than 5 000 photosensitive areas and a matrix linked to shift registers, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

LZ 2019

PD 3573

TCD 103

TCD 105

TCD 133

TCD 141

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*20> ID="3">Interline charge-coupled (CCD) image sensor, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

ICX 018

ICX 021

ICX 022

ICX 024

ICX 038

ICX 039

PD 3732

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*22> ID="3">Detector for amplitude peaks in read/write signals of disc storage units, consisting of a differential amplifier with automatic gain control and a precision full-wave rectifier, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

32P3041

ML 8464

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*23> ID="3">Voltage comparator, operating within a common voltage range of -12 V or more but not exceeding + 12 V and a differential voltage range of -24 V or more but not exceeding + 24 V and a response time not exceeding 6 ns, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

EL 2019

LT 1016

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*24> ID="3">Amplifier/comparator of bipolar technology, for the amplification and comparison of phase/frequency signals from sensor inputs, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

CXA 1418 N

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*25> ID="3">Half-bridge rectifier, consisting of 2 field effect transistors of MOS technology (MOSFETs), capable of driving inductive or capacitive loads with a nominal voltage of 50 V and a nominal current of 2 A, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

Si9950DY

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*26> ID="3">Voltage converter and regulator of bipolar technology, with a voltage loss not exceeding 1,6 V at an output current of 100 mA, operating with a supply voltage range of 3,5 V or more but not exceeding 15 V, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

LT 1054

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*27> ID="3">5-channel voltage comparator for monitoring lamp-circuits, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

AD 22001

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*29> ID="3">Local telephone network circuit of C-MOS technology, capable of tone generation and of switching, amplifying and decoding audio signals from not more than 2 external telephone lines and from not more than 12 internal telephone lines, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

SC 11390

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*30> ID="3">16-bit stereo encoder/decoder with C-MOS technology, having sample rates of 4 kHz or more but not exceeding 48 kHz, comprising a multiplexer, a digital-to-analogue converter, an analogue-to-digital converter, a mute circuit, a voltage reference circuit, a microphone-input, a loudspeaker-output and a headphone-output, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

AD 1849

CS 4215

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*31> ID="3">Audio circuit of C-MOS technology, with a dynamic range of 80 dB or more, comprising 2 digital-to-analogue converters and 2 analogue-to-digital converters, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

AD 1848

CS 4231

CS 4248

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*32> ID="3">Speech-transfer circuit of bipolar technology, operating at a supply voltage of 2,3 V or more but not exceeding 22 V, providing continuously regulation of transmit and receive gain and a mute function, comprising 4 amplifiers, an internal voltage reference, 2 DC regulators and a power down function, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

PBL 3850

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*33> ID="3">Video processing circuit of bipolar technology, for signals from a charge-coupled (CCD) image sensor, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

AN 2014S

AN 2145FHP

CXA 1310AQ

CXA 1390

CXA 1391

CXA 1392

IR 3P69

IR 3P81A

IR 3P92

IR 3P97

IR 3Y17

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*34> ID="3">Passive decoder of BiMOS technology, comprising a fixed matrix, a 7-kHz filter, a noise-reducing circuit, a digital delay circuit and a memory-control circuit, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

LV 1 000

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*35> ID="3">Matrix decoder of BiMOS technology, comprising an adaptive matrix circuit, automatic-balance buffers, a noise generator and a control circuit, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

SSM 2125

SSM 2126

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*37> ID="3">Serial 13-bit linear encoder/decoder of C-MOS technology, providing digital-to-analogue and analogue-to-digital conversion, comprising 2 sample and hold cicuits, a comparator/ amplifier, a data-selector circuit, a successive approximation register, 2 shift registers, a sequence controller and a voltage reference circuit, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

MC 145402

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*38> ID="3">Encoder/decoder with pulse-code-modulation filter of C-MOS technology, operating with a + 5 V single-power supply, comprising an analogue-to-digital converter and a digital-to-analogue converter, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

MC 145480

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*39> ID="3">Encoder/decoder with pulse-code-modulation filter of C-MOS technology, with a dual-power supply and having a typical dissipation rate of 50 mW, comprising an analogue-to-digital converter and a digital-to-analogue converter, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

MC 145503

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*40> ID="3">Adaptive differentiated pulse-code-modulation circuit of C-MOS technology, for encoding/decoding data, capable of full duplex data-transmission between a channel with a transfer rate of 64 Kbits per second and a channel with a transfer rate of 16 Kbits, 24 Kbits, 32 Kbits or 64 Kbits per second, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

MC 145532

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*41> ID="3">Voltage reference circuit providing a typical output voltage of 2,5, 5, 7 or 10 V with a drift slope (output voltage temperature co-efficient) not exceeding 20 ppm/°C, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

AD 580

AD 680

LT 1021

REF 102

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*42> ID="3">Voltage reference circuit with a reverse breakdown of 1,235 V (±4 mV) or 2,5 V (±20 mV), in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

LT 1004

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*43> ID="3">Voice signal processing circuit of C-MOS technology, comprising an encoding circuit, a decoding circuit, a compression circuit, a decompression circuit and a modulator/demodulator (Modem) for full data-transfer at a speed of 1 200 or 2 400 bits/s, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

AK 2353

TC 35492

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*44> ID="3">Modulator of bipolar technology, operating in the UHF band, for the conversion of audio and video signals, in a frequency range of 470 MHz or more but not exceeding 630 MHz, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

ALP 101

CXA 1333

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*45> ID="3">Full-frame charge-coupled image sensor with single-phase clocking and not more than 1 048 576 photosensitive areas, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

TC 223

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*46> ID="3">Encoder/decoder with pulse-code-modulation filters of C-MOS technology, capable of voice digitisation and reconstruction at a speed of 64 Kbits/s or more but not exceeding 2 048 Kbits/s, with a single power supply of 5 V, a power dissipation not exceeding 37 mW in operating mode and not exceeding 3 mW in power down mode and capable of automatically entering in power down mode with clock stop, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

7508 B

7509 B

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*47> ID="3">Programmable diode array, consisting of 14 individual diodes and a rectifier, of gallium arsenide (GaAs) semiconductor material, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

16G010

16G011

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*48> ID="3">Phase-locked loop (PLL) circuit of bipolar technology, comprising an oscillator, a frequency and/or phase detector, 4 prescalers/counters, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

SN 28967

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*49> ID="3">Video processing circuit of bipolar technology, for colour or luminance signals, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

CXA 1207

CXA 1208

or

- other identification markings relating to devices complying with the abovementioned description

These devices are for use in the manufacture of cameras of the 8 mm type (46)()> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*50> ID="3">FM-band receiver of bipolar technology, providing FM-signal demodulation, comprising at least a mixer, an intermediate frequency (IF) amplifier, a limiter amplifier and a data slicer, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

MC 13156

MC 13158

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*51> ID="3">Audio compression/decompression circuit of bipolar technology, providing a compression and an expansion mute function, operating at a supply voltage of 3 V or more but not exceeding 7 V, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

MC 33111

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*52> ID="3">Transmitter/receiver of BiMOS technology, capable of data transmission at a rate per second of 10 Mbits, comprising 6 transmitters and 6 receivers, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

MC 34058

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*53> ID="3">Converter/amplifier of bipolar technology, with an output level of 22 dBm at a frequency of 900 MHz and an input level of -6 dBm, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

HP 3001

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*54> ID="3">Current transmitter of bipolar technology, with an output current of 4 mA or more but not exceeding 20 mA, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

XTR 103

XTR 104

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*55> ID="3">Voltage-to-current converter of bipolar technology, with a selectable input voltage range and a power supply voltage of 13,5 V or more but not exceeding 40 V, comprising a current transmitter and a voltage reference circuit, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

XTR 110

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*56> ID="3">Voltage converter of C-MOS technology, capable of transforming an input voltage level not exceeding 5 V at an input current not exceeding 0,1 mA into an output voltage not exceeding 15 V at an ouput current not exceeding 1 mA, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

LR 36683N

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*57> ID="3">Frequency converter of gallium arsenide (GaAs) semiconductor material, with a conversion gain of 5 dB, capable of converting an input frequency of 50 MHz or more but not exceeding 860 MHz into an output frequency of 1 220 MHz, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

AND 7000S3C

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*58> ID="3">Frequency converter of gallium arsenide (GaAs) semiconductor material, with a conversion gain of 6 dB, capable of converting an input frequency of 1 220 MHz into an output frequency of 45 MHz, comprising an oscillator, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

AND 7001S3C

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*59> ID="3">Frequency converter of gallium arsenide (GaAs) semiconductor material, with a typical conversion gain of 20, 26 or 50 dB, capable of converting an input frequency of 500 MHz or more but not exceeding 2,5 GHz into an output frequency of 30 MHz or more but not exceeding 500 MHz, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

TQ 9201

TQ 9202

TQ 9203

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*60> ID="3">Analogue communication circuit, capable of data conversion and signal transfer, comprising a serial input/output port for a digital signal processor (DSP), a 16-bit analogue-to-digital converter, a 16-bit digital-to-analogue converter and a clock generator, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

AD 28MSP01

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*61> ID="3">FM receiver of bipolar technology, capable of operating at an input frequency rage of 200 MHz, with an FM signal demodulating function, comprising at least 2 mixers, an oscillator, a diode and a Receive Signal Strengh Indicator (RSSI), in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

MC 13135

MC 13136

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*62> ID="3">AM or FM transmitter of bipolar technology, with AM or FM signal modulation function, comprising 3 amplifiers, a prescaler and 2 oscillators, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

MC 13175

MC 13176

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*63> ID="3">Video processing circuit of bipolar technology, for colour and synchronisation signals, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

CXA 1213BS

CXA 1587

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*64> ID="3">AM-band receiver of bipolar technology, providing conversion of radio frequency (RF) into dual intermediate frequency (IF) and detection of audio frequency, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures:

3848

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*65> ID="3">Frequency converter of gallium arsenide (GaAs) semiconductor material, with a conversion gain of 6 dB, capable of converting an input frequency of 950 MHz or more but not exceeding 2 050 MHz into an output frequency of 480 MHz, comprising an oscillator, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

ADC 20013

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*66> ID="3">Frequency synthesiser of C-MOS technology, operating with an input frequency not exceeding 60 MHz and a DC supply voltage not exceeding 10 V, comprising a phase-locked loop (PLL) circuit and a programmable 14-bit reference counter, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

MC 145158

MC 145162

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*67> ID="3">FM-band receiver of BiMOS technology, comprising a compression circuit, a decompression circuit, 2 mixers, 2 phase-locked loop (PLL) circuits, an intermediate frequency (IF) amplifier, a receive signal strength indicator (RSSI), a serial interface circuit and a supply voltage detection circuit, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

MC 13108

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*69> ID="3">FM-band receiver/demodulator of bipolar technology, comprising 2 conversion mixers, a data slicer and 6 amplifiers, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

1QX6

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*70> ID="3">FM-band transmitter/receiver of bipolar technology, comprising 2 conversion mixers, a prescaler and 4 amplifiers, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

1QX5

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*71> ID="3">Acceleration measurement circuit, comprising a capacitif sensor, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

ADXL50

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*72> ID="3">Audio noise reduction circuit of bipolar technology, having an input voltage not exceeding 18 V, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

LM 1894

TK 10654

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*73> ID="3">Signal processing circuit of C-MOS technology, providing analogue signal filtering and gain control, comprising a dual-tone multifrequency (DTMF) transmitter and a DTMF receiver, and a modulator/demodulator (Modem), in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

SC 11370

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*74> ID="3">Filter network only consisting of 16 resistors, 16 capacitors and 16 diodes, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

USRC 1002

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*75> ID="3">Encoder/decoder of C-MOS technology, for base-band and voice-band frequencies, providing data conversion, comprising a modulator for digital signals, analogue-to-digital converters, digital-to-analogue converters, amplifiers and filters, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

AD 7015

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*76> ID="3">Voltage converter of C-MOS technology, capable of inverting, doubling, dividing or multiplying input voltages, operating at a supply voltage range of 1,5 V or more but not exceeding 10 V, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

ICL 7660

MAX 1044

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*77> ID="3">Signal processing circuit of C-MOS technology, providing delay of scanning periods for horizontal image lines of a charge-coupled (CCD) image sensor, comprising a clockgenerator, a clamp circuit and a sample and hold circuit, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

CXL 1 506

MSM 6965 RS

MSM 7401 RS

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*78> ID="3">Audio signal processing circuit of bipolar technology, providing input/output mode selection, comprising 2 voltage controlled oscillators, 2 phase-locked loop (PLL) circuits, an automatic gain control circuit, an audio noise reduction circuit, a mute circuit and amplifiers, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

LA 7481W

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*79> ID="3">Frequency converter of bipolar technology, operating with a frequency range of 800 MHz to 900 MHz and with an input level not exceeding -6 dBm, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

CXA 1851N

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*80> ID="3">6-channel DC-to-DC converter of BiMOS technology, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

MB 3799

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*81> ID="3">Voltage detection circuit, capable of resetting external circuits, in the form of a monolithic integrated analogue circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

M 51957

M 51958

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 20 30> ID="2">*50> ID="3">12-bit analogue-to-digital converter of C-MOS technology, comprising a sample and hold amplifier having a dynamic performance of 1 MHz per second or more, in the form of a hybrid integrated circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

ADS 112

ADS 117

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 20 50> ID="2">*30> ID="3">Amplifier with a programmable gain factor, in the form of a hybrid integrated circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

3606 G

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 20 50> ID="2">*40> ID="3">Amplifier with an input power of 1 mW and an output power not exceeding 3,5 W at a frequency range of 890 MHz or more but not exceeding 915 MHz or of 1 710 MHz or more but not exceeding 1 785 MHz, in the form of a hybrid integrated circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

FA 01314

XHW 903

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 20 50> ID="2">*70> ID="3">Amplifier of bipolar technology, operating within a frequency range of 800 MHz to 950 MHz, with at least one of the following characteristics:

a) an output power of 12,5 W at an input power of 100 mW,

b) an output power of 20 W at an input power of 200 mW,

in the form of a hybrid integrated circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

a) PHW 5113

b) MHW 820-1

b) MHW 820-2

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 20 80> ID="2">*50> ID="3">Voltage and current regulator, having an output voltage not exceeding 850 V at a drive current not exceeding 0,7 A, comprising a power transistor and a control circuit with an oscillator, in the form of a hybrid integrated circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

S 6708

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 20 80> ID="2">*60> ID="3">Voltage regulator with a nominal input operating voltage of 276 V, an input current not exceeding 8 A and an operating frequency not exceeding 200 kHz, in the form of a hybrid integrated circuit contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

MA 2810

MA 2820

MA 2830

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 20 80> ID="2">*70> ID="3">Voltage and current regulator, having an input voltage not exceeding 35 V and a quiescent current not exceeding 100 mA, comprising a field-effect transistor (FET) with a drain current not exceeding 32 A, in the form of a hybrid integrated circuit contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

STR M6523

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 80 00> ID="2">*03> ID="3">Silicon power bridge rectifier, with reverse voltage not exceeding 800 V and an average forward current of 1 A, in the form of a microassembly contained in a housing> ID="4">0"> ID="1">ex 8542 80 00> ID="2">*04> ID="3">Dual silicon zener diode, with a zener voltage of 11 V or more but not exceeding 13 V and a dissipation rate not exceeding 200 mW, in the form of a microassembly contained in a housing> ID="4">0"> ID="1">ex 8542 80 00> ID="2">*05> ID="3">Quintuple field-effect transistor (FET), having a drain-to-source breakdown-voltage of 100 V or more, operating with a continuous drain current not exceeding 5 A, and with a dissipation rate not exceeding 35 W, in the form of a microassembly contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

SLA 5021

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 90 00> ID="2">*10> ID="3">Integrated circuit housing, consisting of a multilayer ceramic substrate with metallic contacts for chips, the dimensions of which do not exceed 47 × 47 mm and with not more than 120 connections> ID="4">0"> ID="1">ex 8543 80 95> ID="2">*21> ID="3">Amplifier of bipolar technology, operating within a frequency range of 68 MHz to 88 MHz, with an output power of 5 W at an input power of 1 mW, consisting of active and passive elements mounted on a printed circuit, contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

MHW 105

XHW 105

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8543 80 95> ID="2">*23> ID="3">Amplifier of bipolar technology, operating within a frequency range of 800 MHz to 950 MHz, with at least one of the following characteristics:

a) an output power of 1,41 W at an input power of 5 mW,

b) an output power of 2 W at an input power of 1 mW,

c) an output power of 3,2 W at an input power of 2 mW,

d) an output power of 3,5 W at an input power of 100 mW,

e) an output power of 6 W at an input power of 100 mW,

f) an output power of 14 W at an input power of 1 or 100 mW,

consisting of active and passive elements mounted on a printed circuit, contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

a) MHW 9002

b) MHW 803

c) PHW 902

d) MHW 953

e) SHW 5115

e) XHW 5115

f) MHW 914

f) MHW 915

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8543 80 95> ID="2">*25> ID="3">Amplifier of gallium arsenide (GaAs) semiconductor material, operating with a frequency range of 1 710 MHz to 1 785 MHz, with an output power of 3 W at an input power of 1 mW, consisting of active and passive elements mounted on a printed circuit, contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

PHW 9012

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8543 80 95> ID="2">*27> ID="3">Amplifier of bipolar technology, operating within a frequency range of 136 MHz to 174 MHz, with an output power of 7 W at an input power of 1 mW, consisting of active and passive elements mounted on a printed circuit, contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

MHW 607

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8543 80 95> ID="2">*28> ID="3">Amplifier of bipolar technology, operating within a frequency range of 400 MHz to 470 MHz, with at least one of the following characteristics:

a) an output power of 3 W at an input power of 1 mW,

b) an output power of 7 W at an input power of 1 mW,

c) an output power of 20 W at an input power of 150 mW,

consisting of active and passive elements mounted on a printed circuit, contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

a) MHW 704

b) MHW 707

c) MHW 720

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8543 80 95> ID="2">*51> ID="3">Temperature compensating frequency oscillator with a nominal frequency of 12,8 MHz and operating at a supply voltage of 3 V (±0,3 V), comprising a printed circuit on which are mounted at least a piezo-electric crystal and an adjustable capacitor, contained in a housing with not more than 5 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

TX 02603

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8543 90 90> ID="2">*10> ID="3">Dual field-effect transistor with at least one of following characteristics:

a) of P-MOS technology (Dual P-MOSFET), having a drain-to-source breakdown-voltage of -20 V, operating with a drain-current not exceeding 9,2 A and with a dissipation rate not exceeding 2 W,

b) of N-MOS (including H-MOS) technology (Dual N/H-MOSFET), having a drain-to-source breakdown-voltage of 20 V or more, operating with a drain-current not exceeding 3,5 A and with a dissipation rate not exceeding 2 W,

contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures:

a) 9947

a) 9953

b) 9956

b) 9959

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8544 60 10> ID="2">*10> ID="3">Electric cable, insulated with plastic, for a voltage of 28 kV or more but not exceeding 32 kV, fitted with an anode in a rubber cap at one end and with a metallic connector at the other end> ID="4">0"> ID="1">ex 8548 00 00> ID="2">*94> ID="3">Optical unit, consisting of a laserdiode and a photodiode, operating at a typical wavelength of 635 or 670 nm> ID="4">0"> ID="1">ex 8548 00 00> ID="2">*95> ID="3">Infrared signal receiver unit, consisting of a photodiode and at least an amplifier in the form of a monolithic integrated circuit, contained in a housing bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

GP1U58XB

SBX 1610

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8548 00 00> ID="2">*96> ID="3">Fibre-optic cable transmitter unit, consisting of a light-emitting diode (LED) operating at a wavelength of 660 nm (±30 nm) and a control circuit in the form of a monolithic integrated circuit, contained in a housing bearing:

- an identification marking consisting of or including the following combination of figures and letters:

GP1F32T

or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 9001 90 90> ID="2">*30> ID="3">Lens of plastic, unmounted, having a focal length of 3,86 mm (±0,1 mm) and with a diameter not exceeding 8 mm, for use in the manufacture of compact disc players (47)()> ID="4">0"> ID="1">ex 9001 90 90> ID="2">*40> ID="3">Optical fibre plate, with an external diameter not exceeding 38 mm, for use in the manufacture of screens and photocathodes for image intensifiers (48)()> ID="4">0"> ID="1">ex 9001 90 90> ID="2">*50> ID="3">Lens, mounted, having a fixed focal length of 3,8 mm (±0,19 mm) or 8 mm (±0,4 mm), with a relative aperture of F2.0 and a diameter not exceeding 33 mm, for use in the manufacture of charged-coupled (CCD) cameras (49)()> ID="4">0"> ID="1">9013 80 30> ID="3">Liquid crystal devices, other than active matrix liquid crystal devices> ID="4">0"> ID="1">ex 9013 80 90> ID="2">*10> ID="3">Polarisation insensitive fibre-optic isolator, operating at a wavelength of 1 300, 1 480 or 1 550 nm, contained in a cylindrical housing with 2 optical fibre cables> ID="4">0"">

(1)() Control of the use for this special purpose shall be carried out pursuant to the relevant Community provisions.