EUR-Lex Access to European Union law
This document is an excerpt from the EUR-Lex website
Document 52011XC0415(10)
Commission communication in the framework of the implementation of the Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment Text with EEA relevance (Publication of titles and references of harmonised standards under the directive)
Commission communication in the framework of the implementation of the Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment Text with EEA relevance (Publication of titles and references of harmonised standards under the directive)
Commission communication in the framework of the implementation of the Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment Text with EEA relevance (Publication of titles and references of harmonised standards under the directive)
OJ C 118, 15.4.2011, p. 35–52
(BG, ES, CS, DA, DE, ET, EL, EN, FR, IT, LV, LT, HU, MT, NL, PL, PT, RO, SK, SL, FI, SV)
|
15.4.2011 |
EN |
Official Journal of the European Union |
C 118/35 |
Commission communication in the framework of the implementation of the Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
(Text with EEA relevance)
(Publication of titles and references of harmonised standards under the directive)
2011/C 118/02
The following list contains references to harmonised standards for pressure equipment and harmonised supporting standards for materials used in manufacturing pressure equipment. In the case of a harmonised supporting standard for materials, presumption of conformity to the essential safety requirements is limited to technical data of materials in the standard and does not presume adequacy of the material to a specific item of equipment. Consequently the technical data stated in the material standard shall be assessed against the design requirements of this specific item of equipment to verify that the essential safety requirements of the PED are satisfied.
|
ESO (1) |
Reference and title of the harmonised standard (and reference document) |
Reference of superseded standard |
Date of cessation of presumption of conformity of superseded standard Note 1 |
|
CEN |
EN 3-8:2006 Portable fire extinguishers - Part 8: Additional requirements to EN 3-7 for the construction, resistance to pressure and mechanical tests for extinguishers with a maximum allowable pressure equal to or lower than 30 bar |
|
|
|
EN 3-8:2006/AC:2007 |
|
|
|
|
CEN |
EN 19:2002 Industrial valves - Marking of metallic valves |
|
|
|
CEN |
EN 267:2009 Automatic forced draught burners for liquid fuels |
|
|
|
CEN |
EN 287-1:2004 Qualification test of welders - Fusion welding - Part 1: Steels |
|
|
|
EN 287-1:2004/A2:2006 |
Note 3 |
Date expired (30.9.2006) |
|
|
EN 287-1:2004/AC:2004 |
|
|
|
|
CEN |
EN 334:2005+A1:2009 Gas pressure regulators for inlet pressures up to 100 bar |
EN 334:2005 Note 2.1 |
Date expired (31.7.2009) |
|
CEN |
EN 378-2:2008+A1:2009 Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation |
EN 378-2:2008 Note 2.1 |
Date expired (28.12.2009) |
|
CEN |
EN 473:2008 Non-destructive testing - Qualification and certification of NDT personnel - General principles |
EN 473:2000 Note 2.1 |
Date expired (31.12.2008) |
|
CEN |
EN 593:2009 Industrial valves - Metallic butterfly valves |
EN 593:2004 Note 2.1 |
Date expired (31.12.2009) |
|
CEN |
EN 676:2003+A2:2008 Automatic forced draught burners for gaseous fuels |
|
|
|
EN 676:2003+A2:2008/AC:2008 |
|
|
|
|
CEN |
EN 764-5:2002 Pressure Equipment - Part 5: Compliance and Inspection Documentation of Materials |
|
|
|
CEN |
EN 764-7:2002 Pressure equipment - Part 7: Safety systems for unfired pressure equipment |
|
|
|
EN 764-7:2002/AC:2006 |
|
|
|
|
CEN |
EN 1057:2006+A1:2010 Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications |
EN 1057:2006 Note 2.1 |
Date expired (31.8.2010) |
|
CEN |
EN 1092-1:2007 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 1: Steel flanges |
|
|
|
CEN |
EN 1092-3:2003 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 3: Copper alloy flanges |
|
|
|
EN 1092-3:2003/AC:2007 |
|
|
|
|
CEN |
EN 1092-4:2002 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 4: Aluminium alloy flanges |
|
|
|
CEN |
EN 1171:2002 Industrial valves - Cast iron gate valves |
|
|
|
CEN |
EN 1252-1:1998 Cryogenic vessels - Materials - Part 1: Toughness requirements for temperatures below -80°C |
|
|
|
EN 1252-1:1998/AC:1998 |
|
|
|
|
CEN |
EN 1252-2:2001 Cryogenic vessels - Materials - Part 2: Toughness requirements for temperatures between -80°C and -20°C |
|
|
|
CEN |
EN 1349:2009 Industrial process control valves |
EN 1349:2000 Note 2.1 |
Date expired (31.5.2010) |
|
CEN |
EN 1515-4:2009 Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC |
|
|
|
CEN |
EN 1562:1997 Founding - Malleable cast irons |
|
|
|
EN 1562:1997/A1:2006 |
Note 3 |
Date expired (31.12.2006) |
|
|
CEN |
EN 1563:1997 Founding - Spheroidal graphite cast irons |
|
|
|
EN 1563:1997/A1:2002 |
Note 3 |
Date expired (30.11.2002) |
|
|
EN 1563:1997/A2:2005 |
Note 3 |
Date expired (31.1.2006) |
|
|
CEN |
EN 1564:1997 Founding - Austempered ductile cast irons |
|
|
|
EN 1564:1997/A1:2006 |
Note 3 |
Date expired (31.7.2006) |
|
|
CEN |
EN 1591-1:2001+A1:2009 Flanges and their joints - Design rules for gasketed circular flange connections - Part 1: Calculation method |
EN 1591-1:2001 Note 2.1 |
Date expired (30.9.2009) |
|
EN 1591-1:2001+A1:2009/AC:2010 |
|
|
|
|
CEN |
EN 1626:2008 Cryogenic vessels - Valves for cryogenic service |
EN 1626:1999 Note 2.1 |
Date expired (31.5.2009) |
|
CEN |
EN 1653:1997 Copper and copper alloys - Plate, sheet and circles for boilers, pressure vessels and hot water storage units |
|
|
|
EN 1653:1997/A1:2000 |
Note 3 |
Date expired (28.2.2001) |
|
|
CEN |
EN 1759-3:2003 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 3: Copper alloy flanges |
|
|
|
EN 1759-3:2003/AC:2004 |
|
|
|
|
CEN |
EN 1759-4:2003 Flanges and their joint - Circular flanges for pipes, valves, fittings and accessories, class designated - Part 4: Aluminium alloy flanges |
|
|
|
CEN |
EN 1797:2001 Cryogenic vessels - Gas/material compatibility |
EN 1797-1:1998 Note 2.1 |
Date expired (31.1.2002) |
|
CEN |
EN 1866:2005 Mobile fire extinguishers |
|
|
|
CEN |
EN 1983:2006 Industrial valves - Steel ball valves |
|
|
|
CEN |
EN 1984:2010 Industrial valves - Steel gate valves |
EN 1984:2000 Note 2.1 |
The date of this publication |
|
CEN |
EN ISO 4126-1:2004 Safety devices for protection against excessive pressure - Part 1: Safety valves (ISO 4126-1:2004) |
|
|
|
EN ISO 4126-1:2004/AC:2006 |
|
|
|
|
CEN |
EN ISO 4126-3:2006 Safety devices for protection against excessive pressure - Part 3: Safety valves and bursting disc safety devices in combination (ISO 4126-3:2006) |
|
|
|
CEN |
EN ISO 4126-4:2004 Safety devices for protection against excessive pressure - Part 4: Pilot operated safety valves (ISO 4126-4:2004) |
|
|
|
CEN |
EN ISO 4126-5:2004 Safety devices for protection against excessive pressure - Part 5: Controlled safety pressure relief systems (CSPRS) (ISO 4126-5:2004) |
|
|
|
EN ISO 4126-5:2004/AC:2008 |
|
|
|
|
CEN |
EN ISO 9606-2:2004 Qualification test of welders - Fusion welding - Part 2: Aluminium and aluminium alloys (ISO 9606-2:2004) |
|
|
|
CEN |
EN ISO 9606-3:1999 Approval testing of welders - Fusion welding - Part 3: Copper and copper alloys (ISO 9606-3:1999) |
|
|
|
CEN |
EN ISO 9606-4:1999 Approval testing of welders - Fusion welding - Part 4: Nickel and nickel alloys (ISO 9606-4:1999) |
|
|
|
CEN |
EN ISO 9606-5:2000 Approval testing of welders - Fusion welding - Part 5: Titanium and titanium alloys, zirconium and zirconium alloys (ISO 9606-5:2000) |
|
|
|
CEN |
EN 10028-1:2007+A1:2009 Flat products made of steels for pressure purposes - Part 1: General requirements |
EN 10028-1:2007 Note 2.1 |
Date expired (31.10.2009) |
|
EN 10028-1:2007+A1:2009/AC:2009 |
|
|
|
|
CEN |
EN 10028-2:2009 Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties |
EN 10028-2:2003 Note 2.1 |
Date expired (31.12.2009) |
|
CEN |
EN 10028-3:2009 Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized |
EN 10028-3:2003 Note 2.1 |
Date expired (31.12.2009) |
|
CEN |
EN 10028-4:2009 Flat products made of steels for pressure purposes - Part 4: Nickel alloy steels with specified low temperature properties |
EN 10028-4:2003 Note 2.1 |
Date expired (31.12.2009) |
|
CEN |
EN 10028-5:2009 Flat products made of steels for pressure purposes - Part 5: Weldable fine grain steels, thermomechanically rolled |
EN 10028-5:2003 Note 2.1 |
Date expired (31.12.2009) |
|
CEN |
EN 10028-6:2009 Flat products made of steels for pressure purposes - Part 6: Weldable fine grain steels, quenched and tempered |
EN 10028-6:2003 Note 2.1 |
Date expired (31.12.2009) |
|
CEN |
EN 10028-7:2007 Flat products made of steels for pressure purposes - Part 7: Stainless steels |
EN 10028-7:2000 Note 2.1 |
Date expired (30.6.2008) |
|
CEN |
EN 10204:2004 Metallic products - Types of inspection documents |
|
|
|
CEN |
EN 10213:2007 Steel castings for pressure purposes |
EN 10213-3:1995 EN 10213-4:1995 EN 10213-2:1995 EN 10213-1:1995 Note 2.1 |
Date expired (31.5.2008) |
|
EN 10213:2007/AC:2008 |
|
|
|
|
CEN |
EN 10216-1:2002 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties |
|
|
|
EN 10216-1:2002/A1:2004 |
Note 3 |
Date expired (30.9.2004) |
|
|
CEN |
EN 10216-2:2002+A2:2007 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties |
EN 10216-2:2002 Note 2.1 |
Date expired (29.2.2008) |
|
CEN |
EN 10216-3:2002 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes |
|
|
|
EN 10216-3:2002/A1:2004 |
Note 3 |
Date expired (30.9.2004) |
|
|
CEN |
EN 10216-4:2002 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties |
|
|
|
EN 10216-4:2002/A1:2004 |
Note 3 |
Date expired (30.9.2004) |
|
|
CEN |
EN 10216-5:2004 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes |
|
|
|
EN 10216-5:2004/AC:2008 |
|
|
|
|
CEN |
EN 10217-1:2002 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties |
|
|
|
EN 10217-1:2002/A1:2005 |
Note 3 |
Date expired (31.7.2005) |
|
|
CEN |
EN 10217-2:2002 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties |
|
|
|
EN 10217-2:2002/A1:2005 |
Note 3 |
Date expired (31.7.2005) |
|
|
CEN |
EN 10217-3:2002 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes |
|
|
|
EN 10217-3:2002/A1:2005 |
Note 3 |
Date expired (31.7.2005) |
|
|
CEN |
EN 10217-4:2002 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 4: Electric welded non-alloy steel tubes with specified low temperature properties |
|
|
|
EN 10217-4:2002/A1:2005 |
Note 3 |
Date expired (31.7.2005) |
|
|
CEN |
EN 10217-5:2002 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 5: Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties |
|
|
|
EN 10217-5:2002/A1:2005 |
Note 3 |
Date expired (31.7.2005) |
|
|
CEN |
EN 10217-6:2002 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6: Submerged arc welded non-alloy steel tubes with specified low temperature properties |
|
|
|
EN 10217-6:2002/A1:2005 |
Note 3 |
Date expired (31.7.2005) |
|
|
CEN |
EN 10217-7:2005 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes |
|
|
|
CEN |
EN 10222-1:1998 Steel forgings for pressure purposes - Part 1: General requirements for open die forgings |
|
|
|
EN 10222-1:1998/A1:2002 |
Note 3 |
Date expired (31.10.2002) |
|
|
CEN |
EN 10222-2:1999 Steel forgings for pressure purposes - Part 2: Ferritic and martensitic steels with specified elevated temperature properties |
|
|
|
EN 10222-2:1999/AC:2000 |
|
|
|
|
CEN |
EN 10222-3:1998 Steel forgings for pressure purposes - Part 3: Nickel steels with specified low temperature properties |
|
|
|
CEN |
EN 10222-4:1998 Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength |
|
|
|
EN 10222-4:1998/A1:2001 |
Note 3 |
Date expired (31.1.2002) |
|
|
CEN |
EN 10222-5:1999 Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels |
|
|
|
EN 10222-5:1999/AC:2000 |
|
|
|
|
CEN |
EN 10253-2:2007 Butt-welding pipe fittings - Part 2: Non alloy and ferritic alloy steels with specific inspection requirements |
|
|
|
CEN |
EN 10253-4:2008 Butt-welding pipe fittings - Part 4: Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements |
|
|
|
EN 10253-4:2008/AC:2009 |
|
|
|
|
CEN |
EN 10269:1999 Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties |
|
|
|
EN 10269:1999/A1:2006 |
Note 3 |
Date expired (31.10.2006) |
|
|
EN 10269:1999/A1:2006/AC:2008 |
|
|
|
|
CEN |
EN 10272:2007 Stainless steel bars for pressure purposes |
EN 10272:2000 Note 2.1 |
Date expired (30.4.2008) |
|
CEN |
EN 10273:2007 Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties |
EN 10273:2000 Note 2.1 |
Date expired (30.6.2008) |
|
CEN |
EN 10305-4:2003 Steel tubes for precision applications - Technical delivery conditions - Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems |
|
|
|
CEN |
EN 10305-6:2005 Steel tubes for precision applications - Technical delivery conditions - Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems |
|
|
|
CEN |
EN ISO 10931:2005 Plastics piping systems for industrial applications - Poly(vinylidene fluoride) (PVDF) - Specifications for components and the system (ISO 10931:2005) |
|
|
|
CEN |
EN 12178:2003 Refrigerating systems and heat pumps - Liquid level indicating devices - Requirements, testing and marking |
|
|
|
CEN |
EN 12263:1998 Refrigerating systems and heat pumps - Safety switching devices for limiting the pressure - Requirements and tests |
|
|
|
CEN |
EN 12266-1:2003 Industrial valves - Testing of valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements |
|
|
|
CEN |
EN 12284:2003 Refrigerating systems and heat pumps - Valves - Requirements, testing and marking |
|
|
|
CEN |
EN 12288:2010 Industrial valves - Copper alloy gate valves |
EN 12288:2003 Note 2.1 |
The date of this publication |
|
CEN |
EN 12334:2001 Industrial valves - Cast iron check valves |
|
|
|
EN 12334:2001/A1:2004 |
Note 3 |
Date expired (28.2.2005) |
|
|
EN 12334:2001/AC:2002 |
|
|
|
|
CEN |
EN 12392:2000 Aluminium and aluminium alloys - Wrought products - Special requirements for products intended for the production of pressure equipment |
|
|
|
CEN |
EN 12420:1999 Copper and copper alloys - Forgings |
|
|
|
CEN |
EN 12434:2000 Cryogenic vessels - Cryogenic flexible hoses |
|
|
|
EN 12434:2000/AC:2001 |
|
|
|
|
CEN |
EN 12451:1999 Copper and copper alloys - Seamless, round tubes for heat exchangers |
|
|
|
CEN |
EN 12452:1999 Copper and copper alloys - Rolled, finned, seamless tubes for heat exchangers |
|
|
|
CEN |
EN 12516-1:2005 Industrial valves - Shell design strength - Part 1: Tabulation method for steel valve shells |
|
|
|
EN 12516-1:2005/AC:2007 |
|
|
|
|
CEN |
EN 12516-2:2004 Industrial valves - Shell design strength - Part 2: Calculation method for steel valve shells |
|
|
|
CEN |
EN 12516-3:2002 Valves - Shell design strength - Part 3: Experimental method |
|
|
|
EN 12516-3:2002/AC:2003 |
|
|
|
|
CEN |
EN 12516-4:2008 Industrial valves - Shell design strength - Part 4: Calculation method for valve shells manufactured in metallic materials other than steel |
|
|
|
CEN |
EN 12542:2010 LPG equipment and accessories - Static welded steel cylindrical tanks, serially produced for the storage of Liquefied Petroleum Gas (LPG) having a volume not greater than 13 m3 - Design and manufacture |
EN 12542:2002 EN 14075:2002 Note 2.1 |
The date of this publication |
|
CEN |
EN 12735-1:2010 Copper and copper alloys - Seamless, round copper tubes for air conditioning and refrigeration - Part 1: Tubes for piping systems |
EN 12735-1:2001 Note 2.1 |
The date of this publication |
|
CEN |
EN 12735-2:2010 Copper and copper alloys - Seamless, round copper tubes for air conditioning and refrigeration - Part 2: Tubes for equipment |
EN 12735-2:2001 Note 2.1 |
The date of this publication |
|
CEN |
EN 12778:2002 Cookware - Pressure cookers for domestic use |
|
|
|
EN 12778:2002/A1:2005 |
Note 3 |
Date expired (31.12.2005) |
|
|
EN 12778:2002/AC:2003 |
|
|
|
|
CEN |
EN 12952-1:2001 Water-tube boilers and auxiliary installations - Part 1: General |
|
|
|
CEN |
EN 12952-2:2001 Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of boilers and accessories |
|
|
|
CEN |
EN 12952-3:2001 Water-tube boilers and auxilliary installations - Part 3: Design and calculation for pressure parts |
|
|
|
CEN |
EN 12952-5:2001 Water-tube boilers and auxiliary installations - Part 5: Workmanship and construction of pressure parts of the boiler |
|
|
|
CEN |
EN 12952-6:2002 Water-tube boilers and auxiliary installations - Part 6: Inspection during construction; documentation and marking of pressure parts of the boiler |
|
|
|
CEN |
EN 12952-7:2002 Water-tube boilers and auxiliary installations - Part 7: Requirements for equipment for the boiler |
|
|
|
CEN |
EN 12952-8:2002 Water-tube boilers and auxiliary installations - Part 8: Requirements for firing systems for liquid and gaseous fuels for the boiler |
|
|
|
CEN |
EN 12952-9:2002 Water-tube boilers and auxiliary installations - Part 9: Requirements for firing systems for pulverized solid fuels for the boiler |
|
|
|
CEN |
EN 12952-10:2002 Water-tube boilers and auxiliary installations - Part 10: Requirements for safeguards against excessive pressure |
|
|
|
CEN |
EN 12952-11:2007 Water-tube boilers and auxiliary installations - Part 11: Requirements for limiting devices of the boiler and accessories |
|
|
|
CEN |
EN 12952-14:2004 Water-tube boilers and auxiliary installations - Part 14: Requirements for flue gas DENOX-systems using liquefied pressurized ammonia and ammonia water solution |
|
|
|
CEN |
EN 12952-16:2002 Water-tube boilers and auxiliary installations - Part 16: Requirements for grate and fluidized-bed firing systems for solid fuels for the boiler |
|
|
|
CEN |
EN 12953-1:2002 Shell boilers - Part 1: General |
|
|
|
CEN |
EN 12953-2:2002 Shell boilers - Part 2: Materials for pressure parts of boilers and accessories |
|
|
|
CEN |
EN 12953-3:2002 Shell boilers - Part 3: Design and calculation for pressure parts |
|
|
|
CEN |
EN 12953-4:2002 Shell boilers - Part 4: Workmanship and construction of pressure parts of the boiler |
|
|
|
CEN |
EN 12953-5:2002 Shell boilers - Part 5: Inspection during construction, documentation and marking of pressure parts of the boiler |
|
|
|
CEN |
EN 12953-6:2002 Shell boilers - Part 6: Requirements for equipment for the boiler |
|
|
|
CEN |
EN 12953-7:2002 Shell boilers - Part 7: Requirements for firing systems for liquid and gaseous fuels for the boilers |
|
|
|
CEN |
EN 12953-8:2001 Shell boilers - Part 8: Requirements for safeguards against excessive pressure |
|
|
|
EN 12953-8:2001/AC:2002 |
|
|
|
|
CEN |
EN 12953-9:2007 Shell boilers - Part 9: Requirements for limiting devices of the boiler and accessories |
|
|
|
CEN |
EN 12953-12:2003 Shell boilers - Part 12: Requirements for grate firing systems for solid fuels for the boiler |
|
|
|
CEN |
EN 13121-1:2003 GRP tanks and vessels for use above ground - Part 1: Raw materials - Specification conditions and acceptance conditions |
|
|
|
CEN |
EN 13121-2:2003 GRP tanks and vessels for use above ground - Part 2: Composite materials - Chemical resistance |
|
|
|
CEN |
EN 13133:2000 Brazing - Brazer approval |
|
|
|
CEN |
EN 13134:2000 Brazing - Procedure approval |
|
|
|
CEN |
EN 13136:2001 Refrigerating systems and heat pumps - Pressure relief devices and their associated piping - Methods for calculation |
|
|
|
EN 13136:2001/A1:2005 |
Note 3 |
Date expired (31.12.2005) |
|
|
CEN |
EN 13175:2003+A2:2007 LPG equipment and accessories - Specification and testing for Liquefied Petroleum Gas (LPG) tank valves and fittings |
EN 13175:2003 Note 2.1 |
Date expired (30.9.2007) |
|
CEN |
EN 13348:2008 Copper and copper alloys - Seamless, round copper tubes for medical gases or vacuum |
EN 13348:2001 Note 2.1 |
Date expired (28.2.2009) |
|
CEN |
EN 13371:2001 Cryogenic vessels - Couplings for cryogenic service |
|
|
|
CEN |
EN 13397:2001 Industrial valves - Diaphragm valves made of metallic materials |
|
|
|
CEN |
EN 13445-1:2009 Unfired pressure vessels - Part 1: General |
EN 13445-1:2002 Note 2.1 |
Date expired (31.12.2009) |
|
CEN |
EN 13445-2:2009 Unfired pressure vessels - Part 2: Materials |
EN 13445-2:2002 Note 2.1 |
Date expired (31.12.2009) |
|
CEN |
EN 13445-3:2009 Unfired pressure vessels - Part 3: Design |
EN 13445-3:2002 Note 2.1 |
Date expired (31.12.2009) |
|
CEN |
EN 13445-4:2009 Unfired pressure vessels - Part 4: Fabrication |
EN 13445-4:2002 Note 2.1 |
Date expired (31.12.2009) |
|
CEN |
EN 13445-5:2009 Unfired pressure vessels - Part 5: Inspection and testing |
EN 13445-5:2002 Note 2.1 |
Date expired (31.12.2009) |
|
CEN |
EN 13445-6:2009 Unfired pressure vessels - Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron |
EN 13445-6:2002 Note 2.1 |
Date expired (31.12.2009) |
|
CEN |
EN 13445-8:2009 Unfired pressure vessels - Part 8: Additional requirements for pressure vessels of aluminium and aluminium alloys |
EN 13445-8:2006 Note 2.1 |
Date expired (31.12.2009) |
|
CEN |
EN 13458-1:2002 Cryogenic vessels - Static vacuum insulated vessels - Part 1: Fundamental requirements |
|
|
|
CEN |
EN 13458-2:2002 Cryogenic vessels - Static vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing |
|
|
|
EN 13458-2:2002/AC:2006 |
|
|
|
|
CEN |
EN 13458-3:2003 Cryogenic vessels - Static vacuum insulated vessels - Part 3: Operational requirements |
|
|
|
EN 13458-3:2003/A1:2005 |
Note 3 |
Date expired (31.12.2005) |
|
|
CEN |
EN 13480-1:2002 Metallic industrial piping - Part 1: General |
|
|
|
EN 13480-1:2002/A1:2005 |
Note 3 |
Date expired (31.12.2005) |
|
|
EN 13480-1:2002/A2:2008 |
Note 3 |
Date expired (30.11.2008) |
|
|
CEN |
EN 13480-2:2002 Metallic industrial piping - Part 2: Materials |
|
|
|
EN 13480-2:2002/A2:2010 |
Note 3 |
Date expired (31.5.2010) |
|
|
EN 13480-2:2002/A1:2010 |
Note 3 |
31.5.2011 |
|
|
CEN |
EN 13480-3:2002 Metallic industrial piping - Part 3: Design and calculation |
|
|
|
EN 13480-3:2002/A4:2010 |
Note 3 |
Date expired (30.11.2010) |
|
|
EN 13480-3:2002/A1:2005 |
Note 3 |
Date expired (28.2.2006) |
|
|
EN 13480-3:2002/A2:2006 |
Note 3 |
Date expired (31.5.2007) |
|
|
EN 13480-3:2002/A3:2009 |
Note 3 |
Date expired (31.7.2009) |
|
|
CEN |
EN 13480-4:2002 Metallic industrial piping - Part 4: Fabrication and installation |
|
|
|
CEN |
EN 13480-5:2002 Metallic industrial piping - Part 5: Inspection and testing |
|
|
|
CEN |
EN 13480-6:2004 Metallic industrial piping - Part 6: Additional requirements for buried piping |
|
|
|
EN 13480-6:2004/A1:2005 |
Note 3 |
Date expired (30.6.2006) |
|
|
CEN |
EN 13480-8:2007 Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium alloy piping |
|
|
|
CEN |
EN 13611:2007 Safety and control devices for gas burners and gas burning appliances - General requirements |
|
|
|
CEN |
EN 13648-1:2008 Cryogenic vessels - Safety devices for protection against excessive pressure - Part 1: Safety valves for cryogenic service |
EN 13648-1:2002 Note 2.1 |
Date expired (31.5.2009) |
|
CEN |
EN 13648-2:2002 Cryogenic vessels - Safety devices for protection against excessive pressure - Part 2: Bursting disc safety devices for cryogenic service |
|
|
|
CEN |
EN 13648-3:2002 Cryogenic vessels - Safety devices for protection against excessive pressure - Part 3: Determination of required discharge - Capacity and sizing |
|
|
|
CEN |
EN 13709:2010 Industrial valves - Steel globe and globe stop and check valves |
EN 13709:2002 Note 2.1 |
The date of this publication |
|
CEN |
EN 13789:2010 Industrial valves - Cast iron globe valves |
EN 13789:2002 Note 2.1 |
The date of this publication |
|
CEN |
EN 13799:2002 Contents gauges for LPG tanks |
|
|
|
EN 13799:2002/AC:2007 |
|
|
|
|
CEN |
EN 13831:2007 Closed expansion vessels with built in diaphragm for installation in water |
|
|
|
CEN |
EN 13835:2002 Founding - Austenitic cast irons |
|
|
|
EN 13835:2002/A1:2006 |
Note 3 |
Date expired (31.12.2006) |
|
|
CEN |
EN 13923:2005 Filament-wound FRP pressure vessels - Materials, design, manufacturing and testing |
|
|
|
CEN |
EN 14071:2004 Pressure relief valves for LPG tanks - Ancillary equipment |
|
|
|
CEN |
EN 14129:2004 Pressure relief valves for LPG tanks |
|
|
|
CEN |
EN 14197-1:2003 Cryogenic vessels - Static non-vacuum insulated vessels - Part 1: Fundamental requirements |
|
|
|
CEN |
EN 14197-2:2003 Cryogenic vessels - Static non-vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing |
|
|
|
EN 14197-2:2003/A1:2006 |
Note 3 |
Date expired (28.2.2007) |
|
|
EN 14197-2:2003/AC:2006 |
|
|
|
|
CEN |
EN 14197-3:2004 Cryogenic vessels - Static non-vacuum insulated vessels - Part 3: Operational requirements |
|
|
|
EN 14197-3:2004/A1:2005 |
Note 3 |
Date expired (31.12.2005) |
|
|
EN 14197-3:2004/AC:2004 |
|
|
|
|
CEN |
EN 14222:2003 Stainless steel shell boilers |
|
|
|
CEN |
EN 14276-1:2006 Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements |
|
|
|
CEN |
EN 14276-2:2007 Pressure equipment for refrigerating systems and heat pumps - Part 2: Piping - General requirements |
|
|
|
CEN |
EN 14341:2006 Industrial valves - Steel check valves |
|
|
|
CEN |
EN 14359:2006+A1:2010 Gas-loaded accumulators for fluid power applications |
EN 14359:2006 Note 2.1 |
30.6.2011 |
|
CEN |
N 14382:2005+A1:2009 Safety devices for gas pressure regulating stations and installations - Gas safety shut-off devices for inlet pressures up to 100 bar |
EN 14382:2005 Note 2.1 |
Date expired (30.9.2009) |
|
EN 14382:2005+A1:2009/AC:2009 |
|
|
|
|
CEN |
EN 14394:2005+A1:2008 Heating boilers - Heating boilers with forced draught burners - Nominal heat output not exceeding 10 MW and maximum operating temperature of 110 °C |
|
|
|
CEN |
EN 14570:2005 Equipping of LPG tanks, overground and underground |
|
|
|
EN 14570:2005/A1:2006 |
Note 3 |
Date expired (31.8.2006) |
|
|
CEN |
EN 14585-1:2006 Corrugated metal hose assemblies for pressure applications - Part 1: Requirements |
|
|
|
CEN |
EN 14917:2009 Metal bellows expansion joints for pressure applications |
|
|
|
CEN |
EN 15001-1:2009 Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing |
|
|
|
CEN |
EN ISO 15493:2003 Plastics piping systems for industrial applications - Acrylonitrile-butadiene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C) - Specifications for components and the system - Metric series (ISO 15493:2003) |
|
|
|
CEN |
EN ISO 15494:2003 Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE) and polypropylene (PP) - Specifications for components and the system - Metric series (ISO 15494:2003) |
|
|
|
CEN |
EN ISO 15613:2004 Specification and qualification of welding procedures for metallic materials - Qualification based on pre-production welding test (ISO 15613:2004) |
|
|
|
CEN |
EN ISO 15614-1:2004 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys (ISO 15614-1:2004) |
|
|
|
EN ISO 15614-1:2004/A1:2008 |
Note 3 |
Date expired (31.8.2008) |
|
|
CEN |
EN ISO 15614-2:2005 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 2: Arc welding of aluminium and its alloys (ISO 15614-2:2005) |
|
|
|
EN ISO 15614-2:2005/AC:2009 |
|
|
|
|
CEN |
EN ISO 15614-4:2005 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 4: Finishing welding of aluminium castings (ISO 15614-4:2005) |
|
|
|
EN ISO 15614-4:2005/AC:2007 |
|
|
|
|
CEN |
EN ISO 15614-5:2004 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 5: Arc welding of titanium, zirconium and their alloys (ISO 15614-5:2004) |
|
|
|
CEN |
EN ISO 15614-6:2006 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 6: Arc and gas welding of copper and its alloys (ISO 15614-6:2006) |
|
|
|
CEN |
EN ISO 15614-7:2007 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 7: Overlay welding (ISO 15614-7:2007) |
|
|
|
CEN |
EN ISO 15614-8:2002 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 8: Welding of tubes to tube-plate joints (ISO 15614-8:2002) |
|
|
|
CEN |
EN ISO 15614-11:2002 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 11: Electron and laser beam welding (ISO 15614-11:2002) |
|
|
|
CEN |
EN ISO 15620:2000 Welding - Friction welding of metallic materials (ISO 15620:2000) |
|
|
|
CEN |
EN ISO 16135:2006 Industrial valves - Ball valves of thermoplastics materials (ISO 16135:2006) |
|
|
|
CEN |
EN ISO 16136:2006 Industrial valves - Butterfly valves of thermoplastics materials (ISO 16136:2006) |
|
|
|
CEN |
EN ISO 16137:2006 Industrial valves - Check valves of thermoplastics materials (ISO 16137:2006) |
|
|
|
CEN |
EN ISO 16138:2006 Industrial valves - Diaphragm valves of thermoplastics materials (ISO 16138:2006) |
|
|
|
CEN |
EN ISO 16139:2006 Industrial valves - Gate valves of thermoplastics materials (ISO 16139:2006) |
|
|
|
CEN |
EN ISO 21787:2006 Industrial valves - Globe valves of thermoplastics materials (ISO 21787:2006) |
|
|
|
Note 1: |
Generally the date of cessation of presumption of conformity will be the date of withdrawal (“dow”), set by the European Standardisation Organisation, but attention of users of these standards is drawn to the fact that in certain exceptional cases this can be otherwise. |
|
Note 2.1: |
The new (or amended) standard has the same scope as the superseded standard. On the date stated, the superseded standard ceases to give presumption of conformity with the essential requirements of the directive. |
|
Note 2.2: |
The new standard has a broader scope than the superseded standard. On the date stated the superseded standard ceases to give presumption of conformity with the essential requirements of the directive. |
|
Note 2.3: |
The new standard has a narrower scope than the superseded standard. On the date stated the (partially) superseded standard ceases to give presumption of conformity with the essential requirements of the directive for those products that fall within the scope of the new standard. Presumption of conformity with the essential requirements of the directive for products that still fall within the scope of the (partially) superseded standard, but that do not fall within the scope of the new standard, is unaffected. |
|
Note 3: |
In case of amendments, the referenced standard is EN CCCCC:YYYY, its previous amendments, if any, and the new, quoted amendment. The superseded standard (column 3) therefore consists of EN CCCCC:YYYY and its previous amendments, if any, but without the new quoted amendment. On the date stated, the superseded standard ceases to give presumption of conformity with the essential requirements of the directive. |
NOTE:
|
— |
Any information concerning the availability of the standards can be obtained either from the European Standardisation Organisations or from the national standardisation bodies of which the list is annexed to the Directive 98/34/EC of the European Parliament and Council (2) amended by the Directive 98/48/EC (3). |
|
— |
Harmonised standards are adopted by the European Standardisation Organisations in English (CEN and CENELEC also publish in French and German). Subsequently, the titles of the harmonised standards are translated into all other required official languages of the European Union by the National Standards Bodies. The European Commission is not responsible for the correctness of the titles which have been presented for publication in the Official Journal. |
|
— |
Publication of the references in the Official Journal of the European Union does not imply that the standards are available in all the Community languages. |
|
— |
This list replaces all the previous lists published in the Official Journal of the European Union. The Commission ensures the updating of this list. |
|
— |
More information about harmonised standards on the Internet at http://ec.europa.eu/enterprise/policies/european-standards/harmonised-standards/index_en.htm |
(1) ESO: European Standards Organisation:
|
— |
CEN: Avenue Marnix 17, 1000 Bruxelles/Brussel, BELGIQUE/BELGIË, Tel. +32 25500811; fax +32 25500819 (http://www.cen.eu), |
|
— |
Cenelec: Avenue Marnix 17, 1000 Bruxelles/Brussel, BELGIQUE/BELGIË, Tel. +32 25196871; fax +32 25196919 (http://www.cenelec.eu), |
|
— |
ETSI: 650, route des Lucioles, 06921 Sophia Antipolis, FRANCE, Tel. +33 492944200; fax +33 493654716 (http://www.etsi.eu). |
(2) OJ L 204, 21.7.1998, p. 37.
(3) OJ L 217, 5.8.1998, p. 18.