EUR-Lex Access to European Union law

Back to EUR-Lex homepage

This document is an excerpt from the EUR-Lex website

Document 52016XC0909(06)

Commission communication in the framework of the implementation of Directive 2014/53/EU of the European Parliament and of the Council on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC (Publication of titles and references of harmonised standards under Union harmonisation legislation)Text with EEA relevance

OJ C 332, 9.9.2016, p. 114–116 (BG, ES, CS, DA, DE, ET, EL, EN, FR, HR, IT, LV, LT, HU, MT, NL, PL, PT, RO, SK, SL, FI, SV)

9.9.2016   

EN

Official Journal of the European Union

C 332/114


Commission communication in the framework of the implementation of Directive 2014/53/EU of the European Parliament and of the Council on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC

(Publication of titles and references of harmonised standards under Union harmonisation legislation)

(Text with EEA relevance)

(2016/C 332/03)

ESO (1)

Reference and title of the standard

(and reference document)

First publication OJ

Reference of superseded standard

Date of cessation of presumption of conformity of superseded standard

Note 1

Standard aims to cover Article(s) of Directive 2014/53/EU

(1)

(2)

(3)

(4)

(5)

(6)

ETSI

EN 300 065 V2.1.2

Narrow-band direct-printing telegraph equipment for receiving meteorological or navigational information (NAVTEX); Harmonised Standard covering the essential requirements of articles 3.2 and 3.3(g) of the Directive 2014/53/EU

8.7.2016

 

 

Article 3(2); Article 3(3)(g)

ETSI

EN 300 676-2 V2.1.1

Ground-based VHF hand-held, mobile and fixed radio transmitters, receivers and transceivers for the VHF aeronautical mobile service using amplitude modulation; Part 2: Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU

8.7.2016

 

 

Article 3(2)

ETSI

EN 301 025 V2.1.1

VHF radiotelephone equipment for general communications and associated equipment for Class ‘D’ Digital Selective Calling (DSC); Harmonised Standard covering the essential requirements of articles 3.2 and 3.3(g) of the Directive 2014/53/EU

12.8.2016

 

 

Article 3(2); Article 3(3)(g)

ETSI

EN 301 783 V2.1.1

Commercially available amateur radio equipment; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU

8.7.2016

 

 

Article 3(2)

ETSI

EN 301 839 V2.1.1

Ultra Low Power Active Medical Implants (ULP-AMI) and associated Peripherals (ULP-AMI-P) operating in the frequency range 402 MHz to 405 MHz; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU

8.7.2016

 

 

Article 3(2)

ETSI

EN 301 908-12 V7.1.1

IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 12: CDMA Multi-Carrier (cdma2000) Repeaters

This is the first publication

 

 

Article 3(2)

ETSI

EN 303 203 V2.1.1

Short Range Devices (SRD); Medical Body Area Network Systems (MBANSs) operating in the 2 483,5 MHz to 2 500 MHz range; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU

12.8.2016

 

 

Article 3(2)

ETSI

EN 303 372-2 V1.1.1

Satellite Earth Stations and Systems (SES); Satellite broadcast reception equipment; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 2: Indoor unit

This is the first publication

 

 

Article 3(2)

Note 1:

Generally the date of cessation of presumption of conformity will be the date of withdrawal (‘dow’), set by the European standardisation organisation, but attention of users of these standards is drawn to the fact that in certain exceptional cases this can be otherwise.

Note 2.1:

The new (or amended) standard has the same scope as the superseded standard. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation.

Note 2.2:

The new standard has a broader scope than the superseded standard. On the date stated the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation.

Note 2.3:

The new standard has a narrower scope than the superseded standard. On the date stated the (partially) superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation for those products or services that fall within the scope of the new standard. Presumption of conformity with the essential or other requirements of the relevant Union legislation for products or services that still fall within the scope of the (partially) superseded standard, but that do not fall within the scope of the new standard, is unaffected.

Note 3:

In case of amendments, the referenced standard is EN CCCCC:YYYY, its previous amendments, if any, and the new, quoted amendment. The superseded standard therefore consists of EN CCCCC:YYYY and its previous amendments, if any, but without the new quoted amendment. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation.

NOTE:

Any information concerning the availability of the standards can be obtained either from the European standardisation organisations or from the national standardisation bodies the list of which is published in the Official Journal of the European Union according to Article 27 of the Regulation (EU) No1025/2012 (2).

Standards are adopted by the European standardisation organisations in English (CEN and CENELEC also publish in French and German). Subsequently, the titles of the standards are translated into all other required official languages of the European Union by the national standardisation bodies. The European Commission is not responsible for the correctness of the titles which have been presented for publication in the Official Journal.

References to Corrigenda ‘…/AC:YYYY’ are published for information only. A Corrigendum removes printing, linguistic or similar errors from the text of a standard and may relate to one or more language versions (English, French and/or German) of a standard as adopted by a European standardisation organisation.

Publication of the references in the Official Journal of the European Union does not imply that the standards are available in all the official languages of the European Union.

This list replaces all the previous lists published in the Official Journal of the European Union. The European Commission ensures the updating of this list.

More information about harmonised standards and other European standards on the Internet at

http://ec.europa.eu/growth/single-market/european-standards/harmonised-standards/index_en.htm


(1)  ESO: European standardisation organisation:

CEN: Avenue Marnix/Marnixlaan 17, 1000 Bruxelles/Brussel, BELGIQUE/BELGIË; tel. +32 25500811; fax +32 25500819 (http://www.cen.eu)

CENELEC: Avenue Marnix/Marnixlaan 17, 1000 Bruxelles/Brussel, BELGIQUE/BELGIË; tel. +32 25196871; fax +32 25196919 (http://www.cenelec.eu)

ETSI: 650 route des Lucioles, 06921 Sophia Antipolis, FRANCE; tel. +33 492944200; fax +33 493654716 (http://www.etsi.eu)

(2)  OJ C 338, 27.9.2014, p. 31.


Top