(1)

In accordance with Article 13 of Directive 2009/48/EC of the European Parliament and of the Council (2), toys which are in conformity with harmonised standards or parts thereof, the references of which have been published in the Official Journal of the European Union, are to be presumed to be in conformity with the requirements covered by those standards or parts thereof set out in Article 10 of Directive 2009/48/EC and Annex II to that Directive.

(2)

By letter M/445 of 9 July 2009 the Commission made a request to the European Committee for Standardisation (CEN) and the European Committee for Electrotechnical Standardisation (Cenelec) for the drafting of new and the revision of existing harmonised standards in support of Directive 2009/48/EC.

(3)

Directive 2009/48/EC lays down, in point 13 of Part III of Annex II thereto, migration limits for 19 elements, from toys or components of toys, that must not be exceeded. However, these migration limits do not apply if any hazard can be excluded, such as by the inaccessibility of a toy component possibly including one or several elements.

(4)

On the basis of the request M/445 of 9 July 2009, CEN revised harmonised standard EN 71-3:2013+A3:2018 on migration of certain elements, the reference of which has been published in the Official Journal of the European Union (3), in order to include the latest technical and scientific progress into the test methods described in standard EN 71-3. This progress includes an improved measurement of chromium VI and of organic tin compounds, better controlled experimental conditions when carrying out the tests, and an improved structure of standard EN 71-3 to ease the practical application. This resulted in the adoption of harmonised standard EN 71-3:2019 on migration of certain elements.

(5)

The Commission together with CEN has assessed whether harmonised standard EN 71-3:2019 on migration of certain elements drafted by CEN complies with the request M/445 of 9 July 2009.

(6)

Harmonised standard EN 71-3:2019 satisfies the requirements, which it aims to cover and which are set out in Directive 2009/48/EC. It is therefore appropriate to publish the reference of that standard in the Official Journal of the European Union.

(7)

Harmonised standard EN 71-3:2019 replaces harmonised standard EN 71-3:2013+A3:2018. It is therefore necessary to withdraw the reference of that standard from the Official Journal of the European Union. In order to afford toy manufacturers sufficient time to adapt their products to the revised specifications in harmonised standard EN 71-3:2019, it is necessary to defer the withdrawal of the reference of harmonised standard EN 71-3:2013+A3:2018.

(8)

In the interests of clarity and rationality, a complete list of references of harmonised standards drafted in support of Directive 2009/48/EC and satisfying the requirements they aim to cover should be published in one act. The references of European standards currently published in the Official Journal of the European Union (4) should therefore be included in this Decision. Consequently, it is also necessary to repeal Commission Implementing Decision (EU) 2019/1254 (5).

(9)

Compliance with a harmonised standard confers a presumption of conformity with the corresponding essential requirements set out in Union harmonisation legislation from the date of publication of the reference of such standard in the Official Journal of the European Union. This Decision should therefore enter into force on the date of its publication,