ISSN 1977-091X

Official Journal

of the European Union

C 435

European flag  

English edition

Information and Notices

Volume 60
15 December 2017


Notice No

Contents

page

 

IV   Notices

 

NOTICES FROM EUROPEAN UNION INSTITUTIONS, BODIES, OFFICES AND AGENCIES

 

European Commission

2017/C 435/01

Commission communication in the framework of the implementation of Directive 2000/9/EC of the European Parliament and of the Council relating to cableway installations designed to carry persons (Publication of titles and references of harmonised standards under Union harmonisation legislation)  ( 1 )

1

2017/C 435/02

Commission communication in the framework of the implementation of the Council Directive 89/686/EEC on the approximation of the laws of the Member States relating to personal protective equipment (Publication of titles and references of harmonised standards under Union harmonisation legislation)  ( 1 )

6

2017/C 435/03

Commission communication in the framework of the implementation of Regulation (EU) No 305/2011 of the European Parliament and of the Council laying down harmonised conditions for the marketing of construction products and repealing Council Directive 89/106/EEC (Publication of titles and references of harmonised standards under Union harmonisation legislation)  ( 1 )

41

2017/C 435/04

Commission communication in the framework of the implementation of the Directive 2008/57/EC of the European Parliament and of the Council on the interoperability of the rail system within the Community (Publication of titles and references of harmonised standards under Union harmonisation legislation)  ( 1 )

93

2017/C 435/05

Commission communication in the framework of the implementation of Directive 1999/5/EC of the European Parliament and of the Council on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity and Directive 2014/53/EU of the European Parliament and of the Council on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC (Publication of titles and references of harmonised standards under Union harmonisation legislation)  ( 1 )

111

2017/C 435/06

Commission communication in the framework of the implementation of Directive 2013/53/EU of the European Parliament and of the Council on recreational craft and personal watercraft and repealing Directive 94/25/EC (Publication of titles and references of harmonised standards under Union harmonisation legislation)  ( 1 )

144

2017/C 435/07

Commission communication in the framework of the implementation of Regulation (EU) No 305/2011 of the European Parliament and of the Council laying down harmonised conditions for the marketing of construction products and repealing Council Directive 89/106/EEC (Publication of references of European Assessment Documents in accordance with Article 22 of Regulation (EU) No 305/2011)  ( 1 )

152


 


 

(1)   Text with EEA relevance.

EN

 


IV Notices

NOTICES FROM EUROPEAN UNION INSTITUTIONS, BODIES, OFFICES AND AGENCIES

European Commission

15.12.2017   

EN

Official Journal of the European Union

C 435/1


Commission communication in the framework of the implementation of Directive 2000/9/EC of the European Parliament and of the Council relating to cableway installations designed to carry persons

(Publication of titles and references of harmonised standards under Union harmonisation legislation)

(Text with EEA relevance)

(2017/C 435/01)

ESO (1)

Reference and title of the standard

(and reference document)

First publication OJ

Reference of superseded standard

Date of cessation of presumption of conformity of superseded standard

Note 1

(1)

(2)

(3)

(4)

(5)

CEN

EN 1709:2004

Safety requirements for cableway installations designed to carry persons — Precommissioning inspection, maintenance, operational inspection and checks

26.4.2005

 

 

CEN

EN 1908:2015

Safety requirements of cableway installations designed to carry persons — Tensioning devices

11.12.2015

EN 1908:2004

Note 2.1

19.5.2016

CEN

EN 1909:2017

Safety requirements for cableway installations designed to carry persons — Recovery and evacuation

This is the first publication

EN 1909:2004

Note 2.1

31.3.2018

CEN

EN 12385-8:2002

Steel wire ropes — Safety — Part 8: Stranded hauling and carrying-hauling ropes for cableway installations designed to carry persons

24.4.2003

 

 

CEN

EN 12385-9:2002

Steel wire ropes — Safety — Part 9: Locked coil carrying ropes for cableway installations designed to carry persons

24.4.2003

 

 

CEN

EN 12397:2004

Safety requirements for cableway installations designed to carry persons — Operation

26.4.2005

 

 

CEN

EN 12927-1:2004

Safety requirements for cableway installations designed to carry persons — Ropes — Part 1: Selection criteria for ropes and their end fixings

26.4.2005

 

 

CEN

EN 12927-2:2004

Safety requirements for cableway installations designed to carry persons — Ropes — Part 2: Safety factors

26.4.2005

 

 

CEN

EN 12927-3:2004

Safety requirements for cableway installations designed to carry persons — Ropes — Part 3: Long splicing of 6 strand hauling, carrying hauling and towing ropes

26.4.2005

 

 

CEN

EN 12927-4:2004

Safety requirements for cableway installations designed to carry persons — Ropes — Part 4: End fixings

26.4.2005

 

 

CEN

EN 12927-5:2004

Safety requirements for cableway installations designed to carry persons — Ropes — Part 5: Storage, transportation, installation and tensioning

26.4.2005

 

 

CEN

EN 12927-6:2004

Safety requirements for cableway installations designed to carry persons — Ropes — Part 6: Discard criteria

26.4.2005

 

 

CEN

EN 12927-7:2004

Safety requirements for cableway installations designed to carry persons — Ropes — Part 7: Inspection, repair and maintenance

26.4.2005

 

 

CEN

EN 12927-8:2004

Safety requirements for cableway installations designed to carry persons — Ropes — Part 8: Magnetic rope testing (MRT)

26.4.2005

 

 

CEN

EN 12929-1:2015

Safety requirements for cableway installations designed to carry persons — General requirements — Part 1: Requirements for all installations

14.8.2015

EN 12929-1:2004

Note 2.1

31.1.2016

CEN

EN 12929-2:2015

Safety requirements for cableway installations designed to carry persons — General requirements — Part 2: Additional requirements for reversible bicable aerial ropeways without carrier truck brakes

14.8.2015

EN 12929-2:2004

Note 2.1

31.1.2016

CEN

EN 12930:2015

Safety requirements for cableway installations designed to carry persons — Calculations

14.8.2015

EN 12930:2004

Note 2.1

31.1.2016

CEN

EN 13107:2015

Safety requirements for cableway installations designed to carry persons — Civil engineering works

11.12.2015

EN 13107:2004

Note 2.1

19.5.2016

 

EN 13107:2015/AC:2016

 

 

 

CEN

EN 13223:2015

Safety requirements for cableway installations designed to carry persons — Drive systems and other mechanical equipment

11.12.2015

EN 13223:2004

Note 2.1

19.5.2016

CEN

EN 13243:2015

Safety requirements for cableway installations designed to carry persons — Electrical equipment other than for drive systems

14.8.2015

EN 13243:2004

Note 2.1

31.1.2016

CEN

EN 13796-1:2017

Safety requirements for cableway installations designed to carry persons — Carriers — Part 1: Grips, carrier trucks, on-board brakes, cabins, chairs, carriages, maintenance carriers, tow-hangers

This is the first publication

EN 13796-1:2005

Note 2.1

31.3.2018

CEN

EN 13796-2:2005

Safety requirements for cableway installations designed to carry persons — Carriers — Part 2: Slipping resistance test for grips

20.9.2005

 

 

CEN

EN 13796-3:2005

Safety requirements for cableway installations designed to carry persons — Carriers — Part 3: Fatigue tests

20.9.2005

 

 

Note 1:

Generally the date of cessation of presumption of conformity will be the date of withdrawal (‘dow’), set by the European standardisation organisation, but attention of users of these standards is drawn to the fact that in certain exceptional cases this can be otherwise.

Note 2.1:

The new (or amended) standard has the same scope as the superseded standard. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation.

Note 2.2:

The new standard has a broader scope than the superseded standard. On the date stated the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation.

Note 2.3:

The new standard has a narrower scope than the superseded standard. On the date stated the (partially) superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation for those products or services that fall within the scope of the new standard. Presumption of conformity with the essential or other requirements of the relevant Union legislation for products or services that still fall within the scope of the (partially) superseded standard, but that do not fall within the scope of the new standard, is unaffected.

Note 3:

In case of amendments, the referenced standard is EN CCCCC:YYYY, its previous amendments, if any, and the new, quoted amendment. The superseded standard therefore consists of EN CCCCC:YYYY and its previous amendments, if any, but without the new quoted amendment. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation.

NOTE:

Any information concerning the availability of the standards can be obtained either from the European standardisation organisations or from the national standardisation bodies the list of which is published in the Official Journal of the European Union according to Article 27 of the Regulation (EU) No 1025/2012 (2).

Standards are adopted by the European standardisation organisations in English (CEN and Cenelec also publish in French and German). Subsequently, the titles of the standards are translated into all other required official languages of the European Union by the national standardisation bodies. The European Commission is not responsible for the correctness of the titles which have been presented for publication in the Official Journal.

References to Corrigenda ‘…/AC:YYYY’ are published for information only. A Corrigendum removes printing, linguistic or similar errors from the text of a standard and may relate to one or more language versions (English, French and/or German) of a standard as adopted by a European standardisation organisation.

Publication of the references in the Official Journal of the European Union does not imply that the standards are available in all the official languages of the European Union.

This list replaces all the previous lists published in the Official Journal of the European Union. The European Commission ensures the updating of this list.

More information about harmonised standards and other European standards on the Internet at:

http://ec.europa.eu/growth/single-market/european-standards/harmonised-standards/index_en.htm


(1)  ESO: European standardisation organisation:

CEN: Avenue Marnix/Marnixlaan 17, 1000 Bruxelles/Brussel, BELGIQUE/BELGIË; tel. +32 25500811; fax +32 25500819 (http://www.cen.eu)

Cenelec: Avenue Marnix/Marnixlaan 17, 1000 Bruxelles/Brussel, BELGIQUE/BELGIË; tel. +32 25196871; fax +32 25196919 (http://www.cenelec.eu)

ETSI: 650 route des Lucioles, 06921 Sophia Antipolis, FRANCE; tel. +33 492944200; fax +33 493654716 (http://www.etsi.eu)

(2)  OJ C 338, 27.9.2014, p. 31.


15.12.2017   

EN

Official Journal of the European Union

C 435/6


Commission communication in the framework of the implementation of the Council Directive 89/686/EEC on the approximation of the laws of the Member States relating to personal protective equipment

(Publication of titles and references of harmonised standards under Union harmonisation legislation)

(Text with EEA relevance)

(2017/C 435/02)

ESO (1)

Reference and title of the standard

(and reference document)

First publication OJ

Reference of superseded standard

Date of cessation of presumption of conformity of superseded standard

Note 1

(1)

(2)

(3)

(4)

(5)

CEN

EN 132:1998

Respiratory protective devices — Definitions of terms and pictograms

4.6.1999

EN 132:1990

Note 2.1

30.6.1999

CEN

EN 133:2001

Respiratory protective devices — Classification

10.8.2002

EN 133:1990

Note 2.1

10.8.2002

CEN

EN 134:1998

Respiratory protective devices — Nomenclature of components

13.6.1998

EN 134:1990

Note 2.1

31.7.1998

CEN

EN 135:1998

Respiratory protective devices — List of equivalent terms

4.6.1999

EN 135:1990

Note 2.1

30.6.1999

CEN

EN 136:1998

Respiratory protective devices — Full face masks — Requirements, testing, marking

13.6.1998

EN 136:1989

EN 136-10:1992

Note 2.1

31.7.1998

 

EN 136:1998/AC:2003

 

 

 

CEN

EN 137:2006

Respiratory protective devices — Self-contained open-circuit compressed air breathing apparatus with full face mask — Requirements, testing, marking

23.11.2007

EN 137:1993

Note 2.1

23.11.2007

CEN

EN 138:1994

Respiratory protective devices — Fresh air hose breathing apparatus for use with full face mask, half mask or mouthpiece assembly — Requirements, testing, marking

16.12.1994

 

 

CEN

EN 140:1998

Respiratory protective devices — Half masks and quarter masks — Requirements, testing, marking

6.11.1998

EN 140:1989

Note 2.1

31.3.1999

 

EN 140:1998/AC:1999

 

 

 

CEN

EN 142:2002

Respiratory protective devices — Mouthpiece assemblies — Requirements, testing, marking

10.4.2003

EN 142:1989

Note 2.1

10.4.2003

CEN

EN 143:2000

Respiratory protective devices — Particle filters — Requirements, testing, marking

24.1.2001

EN 143:1990

Note 2.1

24.1.2001

 

EN 143:2000/A1:2006

21.12.2006

Note 3

21.12.2006

 

EN 143:2000/AC:2005

 

 

 

CEN

EN 144-1:2000

Respiratory protective devices — Gas cylinder valves — Part 1: Thread connections for insert connector

24.1.2001

EN 144-1:1991

Note 2.1

24.1.2001

 

EN 144-1:2000/A1:2003

21.2.2004

Note 3

21.2.2004

 

EN 144-1:2000/A2:2005

6.10.2005

Note 3

31.12.2005

CEN

EN 144-2:1998

Respiratory protective devices — Gas cylinder valves — Part 2: Outlet connections

4.6.1999

 

 

CEN

EN 144-3:2003

Respiratory protective devices — Gas cylinder valves — Part 3: Outlet connections for diving gases Nitrox and oxygen

21.2.2004

 

 

 

EN 144-3:2003/AC:2003

 

 

 

CEN

EN 145:1997

Respiratory protective devices — Self-contained closed-circuit breathing apparatus compressed oxygen or compressed oxygen-nitrogen type — Requirements, testing, marking

19.2.1998

EN 145:1988

EN 145-2:1992

Note 2.1

28.2.1998

 

EN 145:1997/A1:2000

24.1.2001

Note 3

24.1.2001

CEN

EN 148-1:1999

Respiratory protective devices — Threads for facepieces — Part 1: Standard thread connection

4.6.1999

EN 148-1:1987

Note 2.1

31.8.1999

CEN

EN 148-2:1999

Respiratory protective devices — Threads for facepieces — Part 2: Centre thread connection

4.6.1999

EN 148-2:1987

Note 2.1

31.8.1999

CEN

EN 148-3:1999

Respiratory protective devices — Threads for facepieces — Part 3: Tread connection M 45 x 3

4.6.1999

EN 148-3:1992

Note 2.1

31.8.1999

CEN

EN 149:2001+A1:2009

Respiratory protective devices — Filtering half masks to protect against particles — Requirements, testing, marking

6.5.2010

EN 149:2001

Note 2.1

6.5.2010

CEN

EN 166:2001

Personal eye-protection — Specifications

10.8.2002

EN 166:1995

Note 2.1

10.8.2002

CEN

EN 167:2001

Personal eye-protection — Optical test methods

10.8.2002

EN 167:1995

Note 2.1

10.8.2002

CEN

EN 168:2001

Personal eye-protection — Non-optical test methods

10.8.2002

EN 168:1995

Note 2.1

10.8.2002

CEN

EN 169:2002

Personal eye-protection — Filters for welding and related techniques — Transmittance requirements and recommended use

28.8.2003

EN 169:1992

Note 2.1

28.8.2003

CEN

EN 170:2002

Personal eye-protection — Ultraviolet filters — Transmittance requirements and recommended use

28.8.2003

EN 170:1992

Note 2.1

28.8.2003

CEN

EN 171:2002

Personal eye-protection — Infrared filters — Transmittance requirements and recommended use

10.4.2003

EN 171:1992

Note 2.1

10.4.2003

CEN

EN 172:1994

Personal eye protection — Sunglare filters for industrial use

15.5.1996

 

 

 

EN 172:1994/A2:2001

10.8.2002

Note 3

10.8.2002

 

EN 172:1994/A1:2000

4.7.2000

Note 3

31.10.2000

CEN

EN 174:2001

Personal eye-protection — Ski goggles for downhill skiing

21.12.2001

EN 174:1996

Note 2.1

21.12.2001

CEN

EN 175:1997

Personal protection — Equipment for eye and face protection during welding and allied processes

19.2.1998

 

 

CEN

EN 207:2017

Personal eye-protection equipment — Filters and eye-protectors against laser radiation (laser eye-protectors)

13.10.2017

EN 207:2009

Note 2.1

30.10.2017

CEN

EN 208:2009

Personal eye-protection — Eye-protectors for adjustment work on lasers and laser systems (laser adjustment eye-protectors)

6.5.2010

EN 208:1998

Note 2.1

30.6.2010

CEN

EN 250:2014

Respiratory equipment — Open-circuit self-contained compressed air diving apparatus — Requirements, testing and marking

12.12.2014

EN 250:2000

Note 2.1

31.12.2014

CEN

EN 269:1994

Respiratory protective devices — Powered fresh air hose breathing apparatus incorporating a hood — Requirements, testing, marking

16.12.1994

 

 

CEN

EN 342:2004

Protective clothing — Ensembles and garments for protection against cold

6.10.2005

 

 

 

EN 342:2004/AC:2008

 

 

 

CEN

EN 343:2003+A1:2007

Protective clothing — Protection against rain

8.3.2008

EN 343:2003

Note 2.1

8.3.2008

 

EN 343:2003+A1:2007/AC:2009

 

 

 

CEN

EN 348:1992

Protective clothing — Test method: Determination of behaviour of materials on impact of small splashes of molten metal

23.12.1993

 

 

 

EN 348:1992/AC:1993

 

 

 

CEN

EN 352-1:2002

Hearing protectors — General requirements — Part 1: Ear-Muffs

28.8.2003

EN 352-1:1993

Note 2.1

28.8.2003

CEN

EN 352-2:2002

Hearing protectors — General requirements — Part 2: Ear-plugs

28.8.2003

EN 352-2:1993

Note 2.1

28.8.2003

CEN

EN 352-3:2002

Hearing protectors — General requirements — Part 3: Ear-muffs attached to an industrial safety helmet

28.8.2003

EN 352-3:1996

Note 2.1

28.8.2003

CEN

EN 352-4:2001

Hearing protectors — Safety requirements and testing — Part 4: Level-dependent ear-muffs

10.8.2002

 

 

 

EN 352-4:2001/A1:2005

19.4.2006

Note 3

30.4.2006

CEN

EN 352-5:2002

Hearing protectors — Safety requirements and testing — Part 5: Active noise reduction ear-muffs

28.8.2003

 

 

 

EN 352-5:2002/A1:2005

6.5.2010

Note 3

6.5.2010

CEN

EN 352-6:2002

Hearing protectors — Safety requirements and testing — Part 6: Ear-muffs with electrical audio input

28.8.2003

 

 

CEN

EN 352-7:2002

Hearing protectors — Safety requirements and testing — Part 7: Level-dependent ear-plugs

28.8.2003

 

 

CEN

EN 352-8:2008

Hearing protectors — Safety requirements and testing — Part 8: Entertainment audio ear-muffs

28.1.2009

 

 

CEN

EN 353-1:2014

Personal fall protection equipment — Guided type fall arresters including an anchor line — Part 1: Guided type fall arresters including a rigid anchor line

11.12.2015

 

 

CEN

EN 353-2:2002

Personal protective equipment against falls from a height — Part 2: Guided type fall arresters including a flexible anchor line

28.8.2003

EN 353-2:1992

Note 2.1

28.8.2003

CEN

EN 354:2010

Personal fall protection equipment — Lanyards

9.7.2011

EN 354:2002

Note 2.1

9.7.2011

CEN

EN 355:2002

Personal protective equipment against falls from a height — Energy absorbers

28.8.2003

EN 355:1992

Note 2.1

28.8.2003

CEN

EN 358:1999

Personal protective equipment for work positioning and prevention of falls from a height — Belts for work positioning and restraint and work positioning lanyards

21.12.2001

EN 358:1992

Note 2.1

21.12.2001

CEN

EN 360:2002

Personal protective equipment against falls from a height — Retractable type fall arresters

28.8.2003

EN 360:1992

Note 2.1

28.8.2003

CEN

EN 361:2002

Personal protective equipment against falls from a height — Full body harnesses

28.8.2003

EN 361:1992

Note 2.1

28.8.2003

CEN

EN 362:2004

Personal protective equipment against falls from a height — Connectors

6.10.2005

EN 362:1992

Note 2.1

6.10.2005

CEN

EN 363:2008

Personal fall protection equipment — Personal fall protection systems

20.6.2008

EN 363:2002

Note 2.1

31.8.2008

CEN

EN 364:1992

Personal protective equipment against falls from a height — Test methods

23.12.1993

 

 

 

EN 364:1992/AC:1993

 

 

 

CEN

EN 365:2004

Personal protective equipment against falls from a height — General requirements for instructions for use, maintenance, periodic examination, repair, marking and packaging

6.10.2005

EN 365:1992

Note 2.1

6.10.2005

 

EN 365:2004/AC:2006

 

 

 

CEN

EN ISO 374-1:2016

Protective gloves against dangerous chemicals and micro-organisms — Part 1: Terminology and performance requirements for chemical risks (ISO 374-1:2016)

12.4.2017

EN 374-1:2003

Note 2.1

31.5.2017

CEN

EN 374-2:2003

Protective gloves against chemicals and micro-organisms — Part 2: Determination of resistance to penetration

6.10.2005

EN 374-2:1994

Note 2.1

6.10.2005

CEN

EN 374-3:2003

Protective gloves against chemicals and micro-organisms — Part 3: Determination of resistance to permeation by chemicals

6.10.2005

EN 374-3:1994

Note 2.1

6.10.2005

 

EN 374-3:2003/AC:2006

 

 

 

CEN

EN 374-4:2013

Protective gloves against chemicals and micro-organisms — Part 4: Determination of resistance to degradation by chemicals

11.4.2014

 

 

CEN

EN ISO 374-5:2016

Protective gloves against dangerous chemicals and micro-organisms — Part 5: Terminology and performance requirements for micro-organisms risks (ISO 374-5:2016)

12.4.2017

 

 

CEN

EN 379:2003+A1:2009

Personal eye-protection — Automatic welding filters

6.5.2010

EN 379:2003

Note 2.1

6.5.2010

CEN

EN 381-1:1993

Protective clothing for users of hand-held chainsaws — Part 1: Test rig for testing resistance to cutting by a chainsaw

23.12.1993

 

 

CEN

EN 381-2:1995

Protective clothing for users of hand-held chain saws — Part 2: Test methods for leg protectors

12.1.1996

 

 

CEN

EN 381-3:1996

Protective clothing for users of hand-held chain-saws — Part 3: Test methods for footwear

10.10.1996

 

 

CEN

EN 381-4:1999

Protective clothing for users of hand-held chainsaws — Part 4: Test methods for chainsaw protective gloves

16.3.2000

 

 

CEN

EN 381-5:1995

Protective clothing for users of hand-held chain saws — Part 5: Requirements for leg protectors

12.1.1996

 

 

CEN

EN 381-7:1999

Protective clothing for users of hand-held chainsaws — Part 7: Requirements for chainsaw protective gloves

16.3.2000

 

 

CEN

EN 381-8:1997

Protective clothing for users of hand-held chain saws — Part 8: Test methods for chain saw protective gaiters

18.10.1997

 

 

CEN

EN 381-9:1997

Protective clothing for users of hand-held chain saws — Part 9: Requirements for chain saw protective gaiters

18.10.1997

 

 

CEN

EN 381-10:2002

Protective clothing for users of hand-held chainsaws — Part 10: Test method for upper body protectors

28.8.2003

 

 

CEN

EN 381-11:2002

Protective clothing for users of hand-held chainsaws — Part 11: Requirements for upper body protectors

28.8.2003

 

 

CEN

EN 388:2016

Protective gloves against mechanical risks

12.4.2017

EN 388:2003

Note 2.1

31.5.2017

CEN

EN 397:2012+A1:2012

Industrial safety helmets

20.12.2012

EN 397:2012

Note 2.1

30.4.2013

CEN

EN 402:2003

Respiratory protective devices — Lung governed demand self-contained open-circuit compressed air breathing apparatus with full face mask or mouthpiece assembly for escape — Requirements, testing, marking

21.2.2004

EN 402:1993

Note 2.1

21.2.2004

CEN

EN 403:2004

Respiratory protective devices for self-rescue — Filtering devices with hood for escape from fire — Requirements, testing, marking

6.10.2005

EN 403:1993

Note 2.1

6.10.2005

CEN

EN 404:2005

Respiratory protective devices for self-rescue — Filter self-rescuer from carbon monoxide with mouthpiece assembly

6.10.2005

EN 404:1993

Note 2.1

2.12.2005

CEN

EN 405:2001+A1:2009

Respiratory protective devices — Valved filtering half masks to protect against gases or gases and particles — Requirements, testing, marking

6.5.2010

EN 405:2001

Note 2.1

6.5.2010

CEN

EN 407:2004

Protective gloves against thermal risks (heat and/or fire)

6.10.2005

EN 407:1994

Note 2.1

6.10.2005

CEN

EN 420:2003+A1:2009

Protective gloves — General requirements and test methods

6.5.2010

EN 420:2003

Note 2.1

31.5.2010

CEN

EN 421:2010

Protective gloves against ionizing radiation and radioactive contamination

9.7.2011

EN 421:1994

Note 2.1

9.7.2011

CEN

EN 443:2008

Helmets for fire fighting in buildings and other structures

20.6.2008

EN 443:1997

Note 2.1

31.8.2008

CEN

EN 458:2004

Hearing protectors — Recommendations for selection, use, care and maintenance — Guidance document

6.10.2005

EN 458:1993

Note 2.1

6.10.2005

CEN

EN 464:1994

Protective clothing — Protection against liquid and gaseous chemicals, including aerosols and solid particles — Test method: Determination of leak-tightness of gas-tight suits (Internal pressure test)

16.12.1994

 

 

CEN

EN 469:2005

Protective clothing for firefighters — Performance requirements for protective clothing for firefighting

19.4.2006

EN 469:1995

Note 2.1

30.6.2006

 

EN 469:2005/AC:2006

 

 

 

 

EN 469:2005/A1:2006

23.11.2007

Note 3

23.11.2007

CEN

EN 510:1993

Specification for protective clothing for use where there is a risk of entanglement with moving parts

16.12.1994

 

 

CEN

EN 511:2006

Protective gloves against cold

21.12.2006

EN 511:1994

Note 2.1

21.12.2006

CEN

EN 530:2010

Abrasion resistance of protective clothing material — Test methods

9.7.2011

EN 530:1994

Note 2.1

9.7.2011

CEN

EN 564:2014

Mountaineering equipment — Accessory cord — Safety requirements and test methods

11.12.2015

EN 564:2006

Note 2.1

31.1.2016

CEN

EN 565:2017

Mountaineering equipment — Tape — Safety requirements and test methods

This is the first publication

EN 565:2006

Note 2.1

28.2.2018

CEN

EN 566:2017

Mountaineering equipment — Slings — Safety requirements and test methods

13.10.2017

EN 566:2006

Note 2.1

30.10.2017

CEN

EN 567:2013

Mountaineering equipment — Rope clamps — Safety requirements and test methods

28.6.2013

EN 567:1997

Note 2.1

30.9.2013

CEN

EN 568:2015

Mountaineering equipment — Ice anchors — Safety requirements and test methods

9.9.2016

EN 568:2007

Note 2.1

9.9.2016

CEN

EN 569:2007

Mountaineering equipment — Pitons — Safety requirements and test methods

8.3.2008

EN 569:1997

Note 2.1

8.3.2008

CEN

EN 659:2003+A1:2008

Protective gloves for firefighters

20.6.2008

EN 659:2003

Note 2.1

30.9.2008

 

EN 659:2003+A1:2008/AC:2009

 

 

 

CEN

EN 795:2012

Personal fall protection equipment — Anchor devices

11.12.2015

EN 795:1996

Note 2.1

9.9.2016

Warning: This publication does not concern the equipment described in:

type A (anchor devices with one or more stationary anchor points and with the need for structural anchors or fixing elements to fix to the structure) referred to in clauses 3.2.1, 4.4.1, 5.3;

type C (anchor devices employing horizontal flexible anchor lines) referred to in clauses 3.2.3, 4.4.3 and 5.5;

type D (anchor devices employing horizontal rigid anchor lines) referred to in clauses 3.2.4, 4.4.4 and 5.6;

any combination of the above.

In respect of types A, C and D, this publication does not concern either clauses: 4.5, 5.2.2, 6, 7; Annex A or Annex ZA.

Accordingly, in respect of the equipment mentioned above, there shall be no presumption of conformity with the provisions of Directive 89/686/EEC because they are not considered to be PPE.

CEN

EN 812:2012

Industrial bump caps

20.12.2012

EN 812:1997

Note 2.1

30.4.2013

CEN

EN 813:2008

Personal fall protection equipment — Sit harnesses

28.1.2009

EN 813:1997

Note 2.1

28.2.2009

CEN

EN 863:1995

Protective clothing — Mechanical properties — Test method: Puncture resistance

15.5.1996

 

 

CEN

EN 892:2012+A1:2016

Mountaineering equipment — Dynamic mountaineering ropes — Safety requirements and test methods

12.4.2017

EN 892:2012

Note 2.1

31.5.2017

CEN

EN 893:2010

Mountaineering equipment — Crampons — Safety requirements and test methods

9.7.2011

EN 893:1999

Note 2.1

9.7.2011

CEN

EN 943-1:2015

Protective clothing against dangerous solid, liquid and gaseous chemicals, including liquid and solid aerosols — Part 1: Performance requirements for Type 1 (gas-tight) chemical protective suits

9.9.2016

EN 943-1:2002

Note 2.1

9.9.2016

CEN

EN 943-2:2002

Protective clothing against liquid and gaseous chemicals, including liquid aerosols and solid particles — Part 2: Performance requirements for ‘gas-tight’ (Type 1) chemical protective suits for emergency teams (ET)

10.8.2002

 

 

CEN

EN 958:2017

Mountaineering equipment — Energy absorbing systems for use in klettersteig (via ferrata) climbing — Safety requirements and test methods

13.10.2017

EN 958:2006+A1:2010

Note 2.1

13.10.2017

CEN

EN 960:2006

Headforms for use in the testing of protective helmets

21.12.2006

EN 960:1994

Note 2.1

31.12.2006

CEN

EN 966:2012+A1:2012

Helmets for airborne sports

20.12.2012

EN 966:2012

Note 2.1

30.4.2013

CEN

EN 1073-1:1998

Protective clothing against radioactive contamination — Part 1: Requirements and test methods for ventilated protective clothing against particulate radioactivate contamination

6.11.1998

 

 

CEN

EN 1073-2:2002

Protective clothing against radioactive contamination — Part 2: Requirements and test methods for non-ventilated protective clothing against particulate radioactive contamination

28.8.2003

 

 

CEN

EN 1077:2007

Helmets for alpine skiers and snowboarders

8.3.2008

EN 1077:1996

Note 2.1

8.3.2008

CEN

EN 1078:2012+A1:2012

Helmets for pedal cyclists and for users of skateboards and roller skates

20.12.2012

EN 1078:2012

Note 2.1

30.4.2013

CEN

EN 1080:2013

Impact protection helmets for young children

28.6.2013

EN 1080:1997

Note 2.1

31.8.2013

CEN

EN 1082-1:1996

Protective clothing — Gloves and arm guards protecting against cuts and stabs by hand knives — Part 1: Chain mail gloves and arm guards

14.6.1997

 

 

CEN

EN 1082-2:2000

Protective clothing — Gloves and arm guards protecting against cuts and stabs by hand knives — Part 2: Gloves and arm guards made of material other than chain mail

21.12.2001

 

 

CEN

EN 1082-3:2000

Protective clothing — Gloves and arm guards protecting against cuts and stabs by hand knives — Part 3: Impact cut test for fabric, leather and other materials

21.12.2001

 

 

CEN

EN 1146:2005

Respiratory protective devices — Self-contained open-circuit compressed air breathing apparatus incorporating a hood for escape — Requirements, testing, marking

19.4.2006

EN 1146:1997

Note 2.1

30.4.2006

CEN

EN 1149-1:2006

Protective clothing — Electrostatic properties — Part 1: Test method for measurement of surface resistivity

21.12.2006

EN 1149-1:1995

Note 2.1

31.12.2006

CEN

EN 1149-2:1997

Protective clothing — Electrostatic properties — Part 2: Test method for measurement of the electrical resistance through a material (vertical resistance)

19.2.1998

 

 

CEN

EN 1149-3:2004

Protective clothing — Electrostatic properties — Part 3: Test methods for measurement of charge decay

6.10.2005

 

 

CEN

EN 1149-5:2008

Protective clothing — Electrostatic properties — Part 5: Material performance and design requirements

20.6.2008

 

 

CEN

EN 1150:1999

Protective clothing — Visibility clothing for non-professional use — Test methods and requirements

4.6.1999

 

 

CEN

EN 1385:2012

Helmets for canoeing and white water sports

20.12.2012

EN 1385:1997

Note 2.1

30.4.2013

CEN

EN 1486:2007

Protective clothing for fire-fighters — Test methods and requirements for reflective clothing for specialised fire-fighting

8.3.2008

EN 1486:1996

Note 2.1

30.4.2008

CEN

EN 1497:2007

Personal fall protection equipment — Rescue harnesses

8.3.2008

 

 

CEN

EN 1621-1:2012

Motorcyclists' protective clothing against mechanical impact — Part 1: Motorcyclists' limb joint impact protectors — Requirements and test methods

13.3.2013

EN 1621-1:1997

Note 2.1

30.6.2013

CEN

EN 1621-2:2014

Motorcyclists' protective clothing against mechanical impact — Part 2: Motorcyclists' back protectors — Requirements and test methods

12.12.2014

EN 1621-2:2003

Note 2.1

31.12.2014

CEN

EN 1731:2006

Personal eye protection — Mesh eye and face protectors

23.11.2007

EN 1731:1997

Note 2.1

23.11.2007

CEN

EN 1809:2014+A1:2016

Diving equipment — Buoyancy compensators — Functional and safety requirements, test methods

9.9.2016

EN 1809:2014

Note 2.1

30.9.2016

CEN

EN 1827:1999+A1:2009

Respiratory protective devices — Half masks without inhalation valves and with separable filters to protect against gases or gases and particles or particles only — Requirements, testing, marking

6.5.2010

EN 1827:1999

Note 2.1

6.5.2010

CEN

EN 1868:1997

Personal protective equipment against falls from a height — List of equivalent terms

18.10.1997

 

 

CEN

EN 1891:1998

Personal protective equipment for the prevention of falls from a height — Low stretch kernmantel ropes

6.11.1998

 

 

CEN

EN 1938:2010

Personal eye protection — Goggles for motorcycle and moped users

9.7.2011

EN 1938:1998

Note 2.1

9.7.2011

CEN

EN ISO 4869-2:1995

Acoustics — Hearing protectors — Part 2: Estimation of effective A-weighted sound pressure levels when hearing protectors are worn (ISO 4869-2:1994)

15.5.1996

 

 

 

EN ISO 4869-2:1995/AC:2007

 

 

 

CEN

EN ISO 4869-3:2007

Acoustics — Hearing protectors — Part 3: Measurement of insertion loss of ear-muff type protectors using an acoustic test fixture (ISO 4869-3:2007)

8.3.2008

EN 24869-3:1993

Note 2.1

8.3.2008

CEN

EN ISO 6529:2001

Protective clothing — Protection against chemicals — Determination of resistance of protective clothing materials to permeation by liquids and gases (ISO 6529:2001)

6.10.2005

EN 369:1993

Note 2.1

6.10.2005

CEN

EN ISO 6530:2005

Protective clothing — Protection against liquid chemicals — Test method for resistance of materials to penetration by liquids (ISO 6530:2005)

6.10.2005

EN 368:1992

Note 2.1

6.10.2005

CEN

EN ISO 6942:2002

Protective clothing — Protection against heat and fire — Method of test: Evaluation of materials and material assemblies when exposed to a source of radiant heat (ISO 6942:2002)

28.8.2003

EN 366:1993

Note 2.1

28.8.2003

CEN

EN ISO 9151:2016

Protective clothing against heat and flame — Determination of heat transmission on exposure to flame (ISO 9151:2016, Corrected version 2017-03)

12.4.2017

EN 367:1992

Note 2.1

30.6.2017

CEN

EN ISO 9185:2007

Protective clothing — Assessment of resistance of materials to molten metal splash (ISO 9185:2007)

8.3.2008

EN 373:1993

Note 2.1

8.3.2008

CEN

EN ISO 10256:2003

Head and face protection for use in ice hockey (ISO 10256:2003)

6.10.2005

EN 967:1996

Note 2.1

6.10.2005

CEN

EN ISO 10819:2013

Mechanical vibration and shock — Hand-arm vibration — Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand (ISO 10819:2013)

13.12.2013

EN ISO 10819:1996

Note 2.1

13.12.2013

CEN

EN ISO 10862:2009

Small craft — Quick release system for trapeze harness (ISO 10862:2009)

6.5.2010

 

 

CEN

EN ISO 11611:2015

Protective clothing for use in welding and allied processes (ISO 11611:2015)

11.12.2015

EN ISO 11611:2007

Note 2.1

31.1.2016

CEN

EN ISO 11612:2015

Protective clothing — Clothing to protect against heat and flame — Minimum performance requirements (ISO 11612:2015)

11.12.2015

EN ISO 11612:2008

Note 2.1

31.1.2016

CEN

EN 12021:2014

Respiratory equipment — Compressed gases for breathing apparatus

12.12.2014

 

 

CEN

EN 12083:1998

Respiratory protective devices — Filters with breathing hoses, (Non-mask mounted filters) — Particle filters, gas filters, and combined filters — Requirements, testing, marking

4.7.2000

 

 

 

EN 12083:1998/AC:2000

 

 

 

CEN

EN ISO 12127-1:2015

Clothing for protection against heat and flame — Determination of contact heat transmission through protective clothing or constituent materials — Part 1: Contact heat produced by heating cylinder (ISO 12127-1:2015)

9.9.2016

EN 702:1994

Note 2.1

9.9.2016

CEN

EN ISO 12127-2:2007

Clothing for protection against heat and flame — Determination of contact heat transmission through protective clothing or constituent materials — Part 2: Test method using contact heat produced by dropping small cylinders (ISO 12127-2:2007)

8.3.2008

 

 

CEN

EN 12270:2013

Mountaineering equipment — Chocks — Safety requirements and test methods

11.4.2014

EN 12270:1998

Note 2.1

31.5.2014

CEN

EN 12275:2013

Mountaineering equipment — Connectors — Safety requirements and test methods

13.12.2013

EN 12275:1998

Note 2.1

13.12.2013

CEN

EN 12276:2013

Mountaineering equipment — Frictional anchors — Safety requirements and test methods

11.4.2014

EN 12276:1998

Note 2.1

31.5.2014

CEN

EN 12277:2015

Mountaineering equipment — Harnesses — Safety requirements and test methods

12.4.2017

EN 12277:2007

Note 2.1

31.5.2017

CEN

EN 12278:2007

Montaineering equipment — Pulleys — Safety requirements and test methods

23.11.2007

EN 12278:1998

Note 2.1

30.11.2007

CEN

EN ISO 12311:2013

Personal protective equipment — Test methods for sunglasses and related eyewear (ISO 12311:2013, Corrected version 2014-08-15)

13.12.2013

 

 

CEN

EN ISO 12312-1:2013

Eye and face protection — Sunglasses and related eyewear — Part 1: Sunglasses for general use (ISO 12312-1:2013)

13.12.2013

EN 1836:2005+A1:2007

Note 2.3

28.2.2015

 

EN ISO 12312-1:2013/A1:2015

This is the first publication

Note 3

The date of this publication

CEN

EN ISO 12312-2:2015

Eye and face protection — Sunglasses and related eyewear — Part 2: Filters for direct observation of the sun (ISO 12312-2:2015)

11.12.2015

 

 

CEN

EN ISO 12401:2009

Small craft — Deck safety harness and safety line — Safety requirements and test methods (ISO 12401:2009)

6.5.2010

EN 1095:1998

Note 2.1

6.5.2010

CEN

EN ISO 12402-2:2006

Personal flotation devices — Part 2: Lifejackets, performance level 275 — Safety requirements (ISO 12402-2:2006)

21.12.2006

EN 399:1993

Note 2.1

31.3.2007

 

EN ISO 12402-2:2006/A1:2010

9.7.2011

Note 3

9.7.2011

CEN

EN ISO 12402-3:2006

Personal flotation devices — Part 3: Lifejackets, performance level 150 — Safety requirements (ISO 12402-3:2006)

21.12.2006

EN 396:1993

Note 2.1

31.3.2007

 

EN ISO 12402-3:2006/A1:2010

9.7.2011

Note 3

9.7.2011

CEN

EN ISO 12402-4:2006

Personal flotation devices — Part 4: Lifejackets, performance level 100 — Safety requirements (ISO 12402-4:2006)

21.12.2006

EN 395:1993

Note 2.1

31.3.2007

 

EN ISO 12402-4:2006/A1:2010

9.7.2011

Note 3

9.7.2011

CEN

EN ISO 12402-5:2006

Personal flotation devices — Part 5: Buoyancy aids (level 50) — Safety requirements (ISO 12402-5:2006)

21.12.2006

EN 393:1993

Note 2.1

31.3.2007

 

EN ISO 12402-5:2006/AC:2006

 

 

 

 

EN ISO 12402-5:2006/A1:2010

9.7.2011

Note 3

9.7.2011

CEN

EN ISO 12402-6:2006

Personal flotation devices — Part 6: Special purpose lifejackets and buoyancy aids — Safety requirements and additional test methods (ISO 12402-6:2006)

21.12.2006

 

 

 

EN ISO 12402-6:2006/A1:2010

9.7.2011

Note 3

9.7.2011

CEN

EN ISO 12402-8:2006

Personal flotation devices — Part 8: Accessories — Safety requirements and test methods (ISO 12402-8:2006)

2.8.2006

EN 394:1993

Note 2.1

31.8.2006

 

EN ISO 12402-8:2006/A1:2011

11.11.2011

Note 3

11.11.2011

CEN

EN ISO 12402-9:2006

Personal flotation devices — Part 9: Test methods (ISO 12402-9:2006)

21.12.2006

 

 

 

EN ISO 12402-9:2006/A1:2011

11.11.2011

Note 3

11.11.2011

CEN

EN ISO 12402-10:2006

Personal flotation devices — Part 10: Selection and application of personal flotation devices and other relevant devices (ISO 12402-10:2006)

2.8.2006

 

 

CEN

EN 12477:2001

Protective gloves for welders

10.8.2002

 

 

 

EN 12477:2001/A1:2005

6.10.2005

Note 3

31.12.2005

CEN

EN 12492:2012

Mountaineering equipment — Helmets for mountaineers — Safety requirements and test methods

20.12.2012

EN 12492:2000

Note 2.1

30.4.2013

CEN

EN 12628:1999

Diving accessories — Combined buoyancy and rescue devices — Functional and safety requirements, test methods

4.7.2000

 

 

 

EN 12628:1999/AC:2000

 

 

 

CEN

EN 12841:2006

Personal fall protection equipment — Rope access systems — Rope adjustment devices

21.12.2006

 

 

CEN

EN 12941:1998

Respiratory protective devices — Powered filtering devices incorporating a helmet or a hood — Requirements, testing, marking

4.6.1999

EN 146:1991

Note 2.1

4.6.1999

 

EN 12941:1998/A1:2003

6.10.2005

Note 3

6.10.2005

 

EN 12941:1998/A2:2008

5.6.2009

Note 3

5.6.2009

CEN

EN 12942:1998

Respiratory protective devices — Power assisted filtering devices incorporating full face masks, half masks or quarter masks — Requirements, testing, marking

4.6.1999

EN 147:1991

Note 2.1

4.6.1999

 

EN 12942:1998/A1:2002

28.8.2003

Note 3

28.8.2003

 

EN 12942:1998/A2:2008

5.6.2009

Note 3

5.6.2009

CEN

EN 13034:2005+A1:2009

Protective clothing against liquid chemicals — Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals (Type 6 and Type PB [6] equipment)

6.5.2010

EN 13034:2005

Note 2.1

6.5.2010

CEN

EN 13061:2009

Protective clothing — Shin guards for association football players — Requirements and test methods

6.5.2010

EN 13061:2001

Note 2.1

6.5.2010

CEN

EN 13087-1:2000

Protective helmets — Test methods — Part 1: Conditions and conditioning

10.8.2002

 

 

 

EN 13087-1:2000/A1:2001

10.8.2002

Note 3

10.8.2002

CEN

EN 13087-2:2012

Protective helmets — Test methods — Part 2: Shock absorption

20.12.2012

EN 13087-2:2000

Note 2.1

30.4.2013

CEN

EN 13087-3:2000

Protective helmets — Test methods — Part 3: Resistance to penetration

10.8.2002

 

 

 

EN 13087-3:2000/A1:2001

10.8.2002

Note 3

10.8.2002

CEN

EN 13087-4:2012

Protective helmets — Test methods — Part 4: Retention system effectiveness

20.12.2012

EN 13087-4:2000

Note 2.1

30.4.2013

CEN

EN 13087-5:2012

Protective helmets — Test methods — Part 5: Retention system strength

20.12.2012

EN 13087-5:2000

Note 2.1

30.4.2013

CEN

EN 13087-6:2012

Protective helmets — Test methods — Part 6: Field of vision

20.12.2012

EN 13087-6:2000

Note 2.1

30.4.2013

CEN

EN 13087-7:2000

Protective helmets — Test methods — Part 7: Flame resistance

10.8.2002

 

 

 

EN 13087-7:2000/A1:2001

10.8.2002

Note 3

10.8.2002

CEN

EN 13087-8:2000

Protective helmets — Test methods — Part 8: Electrical properties

21.12.2001

 

 

 

EN 13087-8:2000/A1:2005

6.10.2005

Note 3

6.10.2005

CEN

EN 13087-10:2012

Protective helmets — Test methods — Part 10: Resistance to radiant heat

20.12.2012

EN 13087-10:2000

Note 2.1

30.4.2013

CEN

EN 13089:2011

Mountaineering equipment — Ice-tools — Safety requirements and test methods

9.7.2011

 

 

CEN

EN 13138-1:2008

Buoyant aids for swimming instruction — Part 1: Safety requirements and test methods for buoyant aids to be worn

5.6.2009

EN 13138-1:2003

Note 2.1

5.6.2009

CEN

EN 13158:2009

Protective clothing — Protective jackets, body and shoulder protectors for equestrian use: For horse riders and those working with horses, and for horse drivers — Requirements and test methods

6.5.2010

EN 13158:2000

Note 2.1

6.5.2010

CEN

EN 13178:2000

Personal eye-protection — Eye protectors for snowmobile users

21.12.2001

 

 

CEN

EN 13274-1:2001

Respiratory protective devices — Methods of test — Part 1: Determination of inward leakage and total inward leakage

21.12.2001

 

 

CEN

EN 13274-2:2001

Respiratory protective devices — Methods of test — Part 2: Practical performance tests

21.12.2001

 

 

CEN

EN 13274-3:2001

Respiratory protective devices — Methods of test — Part 3: Determination of breathing resistance

10.8.2002

 

 

CEN

EN 13274-4:2001

Respiratory protective devices — Methods of test — Part 4: Flame tests

10.8.2002

 

 

CEN

EN 13274-5:2001

Respiratory protective devices — Methods of test — Part 5: Climatic conditions

21.12.2001

 

 

CEN

EN 13274-6:2001

Respiratory protective devices — Methods of test — Part 6: Determination of carbon dioxide content of the inhalation air

10.8.2002

 

 

CEN

EN 13274-7:2008

Respiratory protective devices — Methods of test — Part 7: Determination of particle filter penetration

20.6.2008

EN 13274-7:2002

Note 2.1

31.7.2008

CEN

EN 13274-8:2002

Respiratory protective devices — Methods of test — Part 8: Determination of dolomite dust clogging

28.8.2003

 

 

CEN

EN 13277-1:2000

Protective equipment for martial arts — Part 1: General requirements and test methods

24.2.2001

 

 

CEN

EN 13277-2:2000

Protective equipment for martial arts — Part 2: Additional requirements and test methods for instep protectors, shin protectors and forearm protectors

24.2.2001

 

 

CEN

EN 13277-3:2013

Protective equipment for martial arts — Part 3: Additional requirements and test methods for trunk protectors

11.4.2014

EN 13277-3:2000

Note 2.1

30.6.2014

CEN

EN 13277-4:2001

Protective equipment for martial arts — Part 4: Additional requirements and test methods for head protectors

10.8.2002

 

 

 

EN 13277-4:2001/A1:2007

23.11.2007

Note 3

31.12.2007

CEN

EN 13277-5:2002

Protective equipment for martial arts — Part 5: Additional requirements and test methods for genital protectors and abdominal protectors

10.8.2002

 

 

CEN

EN 13277-6:2003

Protective equipment for martial arts — Part 6: Additional requirements and test methods for breast protectors for females

21.2.2004

 

 

CEN

EN 13277-7:2009

Protective equipment for martial arts — Part 7: Additional requirements and test methods for hand and foot protectors

6.5.2010

 

 

CEN

EN ISO 13287:2012

Personal protective equipment — Footwear — Test method for slip resistance (ISO 13287:2012)

13.3.2013

EN ISO 13287:2007

Note 2.1

30.4.2013

CEN

EN 13356:2001

Visibility accessories for non-professional use — Test methods and requirements

21.12.2001

 

 

CEN

EN 13484:2012

Helmets for users of luges

20.12.2012

EN 13484:2001

Note 2.1

30.4.2013

CEN

EN ISO 13506-1:2017

Protective clothing against heat and flame — Part 1: Test method for complete garments — Measurement of transferred energy using an instrumented manikin (ISO 13506-1:2017)

This is the first publication

 

 

CEN

EN 13546:2002+A1:2007

Protective clothing — Hand, arm, chest, abdomen, leg, foot and genital protectors for field hockey goal keepers, and shin protectors for field players — Requirements and test methods

23.11.2007

EN 13546:2002

Note 2.1

31.12.2007

CEN

EN 13567:2002+A1:2007

Protective clothing — Hand, arm, chest, abdomen, leg, genital and face protectors for fencers — Requirements and test methods

23.11.2007

EN 13567:2002

Note 2.1

31.12.2007

CEN

EN 13594:2015

Protective gloves for motorcycle riders — Requirements and test methods

11.12.2015

EN 13594:2002

Note 2.1

31.8.2017

CEN

EN 13595-1:2002

Protective clothing for professional motorcycle riders — Jackets, trousers and one piece or divided suits — Part 1: General requirements

28.8.2003

 

 

CEN

EN 13595-2:2002

Protective clothing for professional motorcycle riders — Jackets, trousers and one-piece or divided suits — Part 2: Test method for determination of impact abrasion resistance

28.8.2003

 

 

CEN

EN 13595-3:2002

Protective clothing for professional motorcycle riders — Jackets, trousers and one-piece or divided suits — Part 3: Test method for determination of burst strength

28.8.2003

 

 

CEN

EN 13595-4:2002

Protective clothing for professional motorcycle riders — Jackets, trousers and one-piece or divided suits — Part 4: Test method for determination of impact cut resistance

28.8.2003

 

 

CEN

EN 13634:2010

Protective footwear for motorcycle riders — Requirements and test methods

9.7.2011

EN 13634:2002

Note 2.1

9.7.2011

CEN

EN ISO 13688:2013

Protective clothing — General requirements (ISO 13688:2013)

13.12.2013

EN 340:2003

Note 2.1

31.1.2014

CEN

EN 13781:2012

Protective helmets for drivers and passengers of snowmobiles and bobsleighs

20.12.2012

EN 13781:2001

Note 2.1

30.4.2013

CEN

EN 13794:2002

Respiratory protective devices — Self-contained closed-circuit breathing apparatus for escape — Requirements, testing, marking

28.8.2003

EN 400:1993

EN 401:1993

EN 1061:1996

Note 2.1

28.8.2003

CEN

EN 13819-1:2002

Hearing protectors — Testing — Part 1: Physical test methods

28.8.2003

 

 

CEN

EN 13819-2:2002

Hearing protectors — Testing — Part 2: Acoustic test methods

28.8.2003

 

 

CEN

EN 13832-1:2006

Footwear protecting against chemicals — Part 1: Terminology and test methods

21.12.2006

 

 

CEN

EN 13832-2:2006

Footwear protecting against chemicals — Part 2: Requirements for footwear resistant to chemicals under laboratory conditions

21.12.2006

 

 

CEN

EN 13832-3:2006

Footwear protecting against chemicals — Part 3: Requirements for footwear highly resistant to chemicals under laboratory conditions

21.12.2006

 

 

CEN

EN 13911:2017

Protective clothing for firefighters — Requirements and test methods for fire hoods for firefighters

This is the first publication

EN 13911:2004

Note 2.1

28.2.2018

CEN

EN 13921:2007

Personal protective equipment — Ergonomic principles

23.11.2007

 

 

CEN

EN 13949:2003

Respiratory equipment — Open-circuit self-contained diving apparatus for use with compressed Nitrox and oxygen — Requirements, testing, marking

21.2.2004

 

 

CEN

EN ISO 13982-1:2004

Protective clothing for use against solid particulates — Part 1: Performance requirements for chemical protective clothing providing protection to the full body against airborne solid particulates (type 5 clothing) (ISO 13982-1:2004)

6.10.2005

 

 

 

EN ISO 13982-1:2004/A1:2010

9.7.2011

Note 3

9.7.2011

CEN

EN ISO 13982-2:2004

Protective clothing for use against solid particulates — Part 2: Test method of determination of inward leakage of aerosols of fine particles into suits (ISO 13982-2:2004)

6.10.2005

 

 

CEN

EN ISO 13995:2000

Protective clothing — Mechanical properties — Test method for the determination of the resistance to puncture and dynamic tearing of materials (ISO 13995:2000)

6.10.2005

 

 

CEN

EN ISO 13997:1999

Protective clothing — Mechanical properties — Determination of resistance to cutting by sharp objects (ISO 13997:1999)

4.7.2000

 

 

 

EN ISO 13997:1999/AC:2000

 

 

 

CEN

EN ISO 13998:2003

Protective clothing — Aprons, trousers and vests protecting against cuts and stabs by hand knives (ISO 13998:2003)

28.8.2003

EN 412:1993

Note 2.1

28.8.2003

CEN

EN 14021:2003

Stone shields for off-road motorcycling suited to protect riders against stones and debris — Requirements and test methods

6.10.2005

 

 

CEN

EN 14052:2012+A1:2012

High performance industrial helmets

20.12.2012

EN 14052:2012

Note 2.1

30.4.2013

CEN

EN 14058:2004

Protective clothing — Garments for protection against cool environments

6.10.2005

 

 

CEN

EN ISO 14116:2015

Protective clothing — Protection against flame — Limited flame spread materials, material assemblies and clothing (ISO 14116:2015)

11.12.2015

EN ISO 14116:2008

Note 2.1

31.1.2016

CEN

EN 14120:2003+A1:2007

Protective clothing — Wrist, palm, knee and elbow protectors for users of roller sports equipment — Requirements and test methods

23.11.2007

EN 14120:2003

Note 2.1

31.12.2007

CEN

EN 14126:2003

Protective clothing — Performance requirements and tests methods for protective clothing against infective agents

6.10.2005

 

 

 

EN 14126:2003/AC:2004

 

 

 

CEN

EN 14143:2013

Respiratory equipment — Self-contained re-breathing diving apparatus

13.12.2013

EN 14143:2003

Note 2.1

31.1.2014

CEN

EN 14225-1:2005

Diving suits — Part 1: Wet suits — Requirements and test methods

6.10.2005

 

 

CEN

EN 14225-2:2005

Diving suits — Part 2: Dry suits — Requirements and test methods

6.10.2005

 

 

CEN

EN 14225-3:2005

Diving suits — Part 3: Actively heated or cooled suits (systems) — Requirements and test methods

6.10.2005

 

 

CEN

EN 14225-4:2005

Diving suits — Part 4: One atmosphere suits (ADS) — Human factors requirements and test methods

6.10.2005

 

 

CEN

EN 14325:2004

Protective clothing against chemicals — Test methods and performance classification of chemical protective clothing materials, seams, joins and assemblages

6.10.2005

 

 

CEN

EN 14328:2005

Protective clothing — Gloves and armguards protecting against cuts by powered knives — Requirements and test methods

6.10.2005

 

 

CEN

EN 14360:2004

Protective clothing against rain — Test method for ready made garments — Impact from above with high energy droplets

6.10.2005

 

 

CEN

EN 14387:2004+A1:2008

Respiratory protective devices — Gas filter(s) and combined filter(s) — Requirements, testing, marking

20.6.2008

EN 14387:2004

Note 2.1

31.7.2008

CEN

EN 14404:2004+A1:2010

Personal protective equipment — Knee protectors for work in the kneeling position

6.5.2010

EN 14404:2004

Note 2.1

31.7.2010

CEN

EN 14435:2004

Respiratory protective devices — Self-contained open-circuit compressed air breathing apparatus with half mask designed to be used with positive pressure only — Requirements, testing, marking

6.10.2005

 

 

CEN

EN 14458:2004

Personal eye-equipment — Faceshields and visors for use with firefighters' and high performance industrial safety helmets used by firefighters, ambulance and emergency services

6.10.2005

 

 

CEN

EN ISO 14460:1999

Protective clothing for automobile racing drivers — Protection against heat and flame — Performance requirements and test methods (ISO 14460:1999)

16.3.2000

 

 

 

EN ISO 14460:1999/AC:1999

 

 

 

 

EN ISO 14460:1999/A1:2002

10.8.2002

Note 3

30.9.2002

CEN

EN 14529:2005

Respiratory protective devices — Self-contained open-circuit compressed air breathing apparatus with half mask designed to include a positive pressure lung governed demand valve for escape purposes only

19.4.2006

 

 

CEN

EN 14593-1:2005

Respiratory protective devices — Compressed air line breathing apparatus with demand valve — Part 1: Apparatus with a full face mask — Requirements, testing, marking

6.10.2005

EN 139:1994

Note 2.1

2.12.2005

CEN

EN 14593-2:2005

Respiratory protective devices — Compressed air line breathing apparatus with demand valve — Part 2: Apparatus with a half mask at positive pressure — Requirements, testing, marking

6.10.2005

EN 139:1994

Note 2.1

2.12.2005

 

EN 14593-2:2005/AC:2005

 

 

 

CEN

EN 14594:2005

Respiratory protective devices — Continuous flow compressed air line breathing apparatus — Requirements, testing, marking

6.10.2005

EN 139:1994

EN 270:1994

EN 271:1995

EN 1835:1999

EN 12419:1999

Note 2.1

2.12.2005

 

EN 14594:2005/AC:2005

 

 

 

CEN

EN 14605:2005+A1:2009

Protective clothing against liquid chemicals — performance requirements for clothing with liquid-tight (Type 3) or spray-tight (Type 4) connections, including items providing protection to parts of the body only (Types PB [3] and PB [4])

6.5.2010

EN 14605:2005

Note 2.1

6.5.2010

CEN

EN 14786:2006

Protective clothing — Determination of resistance to penetration by sprayed liquid chemicals, emulsions and dispersions — Atomizer test

21.12.2006

 

 

CEN

EN ISO 14877:2002

Protective clothing for abrasive blasting operations using granular abrasives (ISO 14877:2002)

28.8.2003

 

 

CEN

EN ISO 15025:2002

Protective clothing — Protection against heat and flame — Method of test for limited flame spread (ISO 15025:2000)

28.8.2003

EN 532:1994

Note 2.1

28.8.2003

CEN

EN ISO 15027-1:2012

Immersion suits — Part 1: Constant wear suits, requirements including safety (ISO 15027-1:2012)

13.3.2013

EN ISO 15027-1:2002

Note 2.1

31.5.2013

CEN

EN ISO 15027-2:2012

Immersion suits — Part 2: Abandonment suits, requirements including safety (ISO 15027-2:2012)

13.3.2013

EN ISO 15027-2:2002

Note 2.1

31.5.2013

CEN

EN ISO 15027-3:2012

Immersion suits — Part 3: Test methods (ISO 15027-3:2012)

13.3.2013

EN ISO 15027-3:2002

Note 2.1

31.5.2013

CEN

EN 15090:2012

Footwear for firefighters

20.12.2012

EN 15090:2006

Note 2.1

30.4.2013

CEN

EN 15151-1:2012

Mountaineering equipment — Braking devices — Part 1: Braking devices with manually assisted locking, safety requirements and test methods

20.12.2012

 

 

CEN

EN 15333-1:2008

Respiratory equipment — Open-circuit umbilical supplied compressed gas diving apparatus — Part 1: Demand apparatus

20.6.2008

 

 

 

EN 15333-1:2008/AC:2009

 

 

 

CEN

EN 15333-2:2009

Respiratory equipment — Open-circuit umbilical supplied compressed gas diving apparatus — Part 2: Free flow apparatus

6.5.2010

 

 

CEN

EN 15613:2008

Knee and elbow protectors for indoor sports — Safety requirements and test methods

5.6.2009

 

 

CEN

EN 15614:2007

Protective clothing for firefighters — Laboratory test methods and performance requirements for wildland clothing

23.11.2007

 

 

CEN

EN ISO 15831:2004

Clothing — Physiological effects — Measurement of thermal insulation by means of a thermal manikin (ISO 15831:2004)

6.10.2005

 

 

CEN

EN 16027:2011

Protective clothing — Gloves with protective effect for association football goal keepers

16.2.2012

 

 

CEN

EN 16350:2014

Protective gloves — Electrostatic properties

12.12.2014

 

 

CEN

EN 16473:2014

Firefighters helmets — Helmets for technical rescue

11.12.2015

 

 

CEN

EN 16689:2017

Protective clothing for firefighters — Performance requirements for protective clothing for technical rescue

13.10.2017

 

 

CEN

EN 16716:2017

Mountaineering equipment — Avalanche airbag systems — Safety requirements and test methods

13.10.2017

 

 

CEN

EN ISO 17249:2013

Safety footwear with resistance to chain saw cutting (ISO 17249:2013)

11.4.2014

EN ISO 17249:2004

Note 2.1

30.11.2015

 

EN ISO 17249:2013/AC:2014

 

 

 

CEN

EN ISO 17491-3:2008

Protective clothing — Test methods for clothing providing protection against chemicals — Part 3: Determination of resistance to penetration by a jet of liquid (jet test) (ISO 17491-3:2008)

28.1.2009

EN 463:1994

Note 2.1

28.2.2009

CEN

EN ISO 17491-4:2008

Protective clothing — Test methods for clothing providing protection against chemicals — Part 4: Determination of resistance to penetration by a spray of liquid (spray test) (ISO 17491-4:2008)

28.1.2009

EN 468:1994

Note 2.1

28.2.2009

CEN

EN ISO 20344:2011

Personal protective equipment — Test methods for footwear (ISO 20344:2011)

16.2.2012

EN ISO 20344:2004

Note 2.1

30.6.2012

CEN

EN ISO 20345:2011

Personal protective equipment — Safety footwear (ISO 20345:2011)

16.2.2012

EN ISO 20345:2004

Note 2.1

30.6.2013

CEN

EN ISO 20346:2014

Personal protective equipment — Protective footwear (ISO 20346:2014)

12.12.2014

EN ISO 20346:2004

Note 2.1

31.12.2014

CEN

EN ISO 20347:2012

Personal protective equipment — Occupational footwear (ISO 20347:2012)

20.12.2012

EN ISO 20347:2004

Note 2.1

30.4.2013

CEN

EN ISO 20349-1:2017

Personal protective equipment — Footwear protecting against risks in foundries and welding — Part 1: Requirements and test methods for protection against risks in foundries (ISO 20349-1:2017)

This is the first publication

EN ISO 20349:2010

Note 2.1

23.8.2019

CEN

EN ISO 20349-2:2017

Personal protective equipment — Footwear protecting against risks in foundries and welding — Part 2: Requirements and test methods for protection against risks in welding and allied processes (ISO 20349-2:2017)

This is the first publication

EN ISO 20349:2010

Note 2.1

31.3.2018

CEN

EN ISO 20471:2013

High visibility clothing — Test methods and requirements (ISO 20471:2013, Corrected version 2013-06-01)

28.6.2013

EN 471:2003+A1:2007

Note 2.1

30.9.2013

 

EN ISO 20471:2013/A1:2016

12.4.2017

Note 3

31.5.2017

CEN

EN 24869-1:1992

Acoustics — Hearing protectors — Subjective method for the measurement of sound attenuation (ISO 4869-1:1990)

16.12.1994

 

 

Cenelec

EN 50286:1999

Electrical insulating protective clothing for low-voltage installations

16.3.2000

 

 

Cenelec

EN 50321:1999

Electrically insulating footwear for working on low voltage installations

16.3.2000

 

 

Cenelec

EN 50365:2002

Electrically insulating helmets for use on low voltage installations

10.4.2003

 

 

Cenelec

EN 60743:2001

Live working — Terminology for tools, equipment and devices

IEC 60743:2001

10.4.2003

EN 60743:1996

Note 2.1

1.12.2004

 

EN 60743:2001/A1:2008

IEC 60743:2001/A1:2008

9.7.2011

Note 3

9.7.2011

Cenelec

EN 60895:2003

Live working — Conductive clothing for use at nominal voltage up to 800 kV a.c. and ± 600 kV d.c.

IEC

IEC 60895:2002 (Modified)

6.10.2005

EN 60895:1996

Note 2.1

1.7.2006

Cenelec

EN 60903:2003

Live working — Gloves of insulating material

IEC

IEC 60903:2002 (Modified)

6.10.2005

EN 50237:1997

EN 60903:1992

+ A11:1997

Note 2.1

1.7.2006

Cenelec

EN 60984:1992

Sleeves of insulating material for live working

IEC 60984:1990 (Modified)

4.6.1999

 

 

 

EN 60984:1992/A11:1997

4.6.1999

Note 3

4.6.1999

 

EN 60984:1992/A1:2002

IEC 60984:1990/A1:2002

10.4.2003

Note 3

6.10.2005

Note 1:

Generally the date of cessation of presumption of conformity will be the date of withdrawal (‘dow’), set by the European standardisation organisation, but attention of users of these standards is drawn to the fact that in certain exceptional cases this can be otherwise.

Note 2.1:

The new (or amended) standard has the same scope as the superseded standard. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation.

Note 2.2:

The new standard has a broader scope than the superseded standard. On the date stated the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation.

Note 2.3:

The new standard has a narrower scope than the superseded standard. On the date stated the (partially) superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation for those products or services that fall within the scope of the new standard. Presumption of conformity with the essential or other requirements of the relevant Union legislation for products or services that still fall within the scope of the (partially) superseded standard, but that do not fall within the scope of the new standard, is unaffected.

Note 3:

In case of amendments, the referenced standard is EN CCCCC:YYYY, its previous amendments, if any, and the new, quoted amendment. The superseded standard therefore consists of EN CCCCC:YYYY and its previous amendments, if any, but without the new quoted amendment. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation.

NOTE:

Any information concerning the availability of the standards can be obtained either from the European standardisation organisations or from the national standardisation bodies the list of which is published in the Official Journal of the European Union according to Article 27 of the Regulation (EU) No 1025/2012 (2).

Standards are adopted by the European standardisation organisations in English (CEN and Cenelec also publish in French and German). Subsequently, the titles of the standards are translated into all other required official languages of the European Union by the national standardisation bodies. The European Commission is not responsible for the correctness of the titles which have been presented for publication in the Official Journal.

References to Corrigenda ‘…/AC:YYYY’ are published for information only. A Corrigendum removes printing, linguistic or similar errors from the text of a standard and may relate to one or more language versions (English, French and/or German) of a standard as adopted by a European standardisation organisation.

Publication of the references in the Official Journal of the European Union does not imply that the standards are available in all the official languages of the European Union.

This list replaces all the previous lists published in the Official Journal of the European Union. The European Commission ensures the updating of this list.

More information about harmonised standards and other European standards on the Internet at:

http://ec.europa.eu/growth/single-market/european-standards/harmonised-standards/index_en.htm


(1)  ESO: European standardisation organisation:

CEN: Avenue Marnix 17, 1000 Brussels, BELGIUM. Tel. +32 25500811; fax +32 25500819 (http://www.cen.eu)

Cenelec: Avenue Marnix 17, 1000 Brussels, BELGIUM. Tel. +32 25196871; fax +32 25196919 (http://www.cenelec.eu)

ETSI: 650, route des Lucioles, 06921 Sophia Antipolis, FRANCE. Tel. +33 492944200; fax +33 493654716 (http://www.etsi.eu)

(2)  OJ C 338, 27.9.2014, p. 31.


15.12.2017   

EN

Official Journal of the European Union

C 435/41


Commission communication in the framework of the implementation of Regulation (EU) No 305/2011 of the European Parliament and of the Council laying down harmonised conditions for the marketing of construction products and repealing Council Directive 89/106/EEC

(Publication of titles and references of harmonised standards under Union harmonisation legislation)

(Text with EEA relevance)

(2017/C 435/03)

The provisions of Regulation (EU) No 305/2011 prevail over any conflicting provisions in the harmonised standards.

ESO (1)

Reference and title of the standard

(and reference document)

Reference of superseded standard

Date of applicability of the standard as a harmonised standard

Date of the end of the co-existence period

(1)

(2)

(3)

(4)

(5)

CEN

EN 1:1998

Flued oil stoves with vaporizing burners

 

1.1.2008

1.1.2009

 

EN 1:1998/A1:2007

 

1.1.2008

1.1.2009

CEN

EN 40-4:2005

Lighting columns — Part 4: Requirements for reinforced and prestressed concrete lighting columns

 

1.10.2006

1.10.2007

 

EN 40-4:2005/AC:2006

 

1.1.2007

1.1.2007

CEN

EN 40-5:2002

Lighting columns — Part 5: Requirements for steel lighting columns

 

1.2.2003

1.2.2005

CEN

EN 40-6:2002

Lighting columns — Part 6: Requirements for aluminium lighting columns

 

1.2.2003

1.2.2005

CEN

EN 40-7:2002

Lighting columns — Part 7: Requirements for fibre reinforced polymer composite lighting columns

 

1.10.2003

1.10.2004

CEN

EN 54-2:1997

Fire detection and fire alarm systems — Part 2: Control and indicating equipment

 

1.1.2008

1.8.2009

 

EN 54-2:1997/AC:1999

 

1.1.2008

1.1.2008

 

EN 54-2:1997/A1:2006

 

1.1.2008

1.8.2009

CEN

EN 54-3:2001

Fire detection and fire alarm systems — Part 3: Fire alarm devices — Sounders

 

1.4.2003

1.6.2009

 

EN 54-3:2001/A2:2006

 

1.3.2007

1.6.2009

 

EN 54-3:2001/A1:2002

 

1.4.2003

30.6.2005

CEN

EN 54-4:1997

Fire detection and fire alarm systems — Part 4: Power supply equipment

 

1.10.2003

1.8.2009

 

EN 54-4:1997/AC:1999

 

1.6.2005

1.6.2005

 

EN 54-4:1997/A1:2002

 

1.10.2003

1.8.2009

 

EN 54-4:1997/A2:2006

 

1.6.2007

1.8.2009

CEN

EN 54-5:2000

Fire detection and fire alarm systems — Part 5: Heat detectors — Point detectors

 

1.4.2003

30.6.2005

 

EN 54-5:2000/A1:2002

 

1.4.2003

30.6.2005

CEN

EN 54-7:2000

Fire detection and fire alarm systems — Part 7: Smoke detectors — Point detectors using scattered light, transmitted light or ionization

 

1.4.2003

1.8.2009

 

EN 54-7:2000/A2:2006

 

1.5.2007

1.8.2009

 

EN 54-7:2000/A1:2002

 

1.4.2003

30.6.2005

CEN

EN 54-10:2002

Fire detection and fire alarm systems — Part 10: Flame detectors — Point detectors

 

1.9.2006

1.9.2008

 

EN 54-10:2002/A1:2005

 

1.9.2006

1.9.2008

CEN

EN 54-11:2001

Fire detection and fire alarm systems — Part 11: Manual call points

 

1.9.2006

1.9.2008

 

EN 54-11:2001/A1:2005

 

1.9.2006

1.9.2008

CEN

EN 54-12:2015

Fire detection and fire alarm systems — Part 12: Smoke detectors — Line detectors using an optical beam

EN 54-12:2002

8.4.2016

8.4.2019

CEN

EN 54-16:2008

Fire detection and fire alarm systems — Part 16: Voice alarm control and indicating equipment

 

1.1.2009

1.4.2011

CEN

EN 54-17:2005

Fire detection and fire alarm systems — Part 17: Short-circuit isolators

 

1.10.2006

1.12.2008

 

EN 54-17:2005/AC:2007

 

1.1.2009

1.1.2009

CEN

EN 54-18:2005

Fire detection and fire alarm systems — Part 18: Input/output devices

 

1.10.2006

1.12.2008

 

EN 54-18:2005/AC:2007

 

1.1.2008

1.1.2008

CEN

EN 54-20:2006

Fire detection and fire alarm systems — Part 20: Aspirating smoke detectors

 

1.4.2007

1.7.2009

 

EN 54-20:2006/AC:2008

 

1.8.2009

1.8.2009

CEN

EN 54-21:2006

Fire detection and fire alarm systems — Part 21: Alarm transmission and fault warning routing equipment

 

1.3.2007

1.6.2009

CEN

EN 54-23:2010

Fire detection and fire alarm systems — Part 23: Fire alarm devices — Visual alarm devices

 

1.12.2010

31.12.2013

CEN

EN 54-24:2008

Fire detection and fire alarm systems — Part 24: Components of voice alarm systems — Loudspeakers

 

1.1.2009

1.4.2011

CEN

EN 54-25:2008

Fire detection and fire alarm systems — Part 25: Components using radio links

 

1.1.2009

1.4.2011

 

EN 54-25:2008/AC:2012

 

1.7.2012

1.7.2012

CEN

EN 179:2008

Building hardware — Emergency exit devices operated by a lever handle or push pad, for use on escape routes — Requirements and test methods

EN 179:1997

1.1.2009

1.1.2010

CEN

EN 197-1:2011

Cement — Part 1: Composition, specifications and conformity criteria for common cements

EN 197-1:2000

EN 197-4:2004

1.7.2012

1.7.2013

CEN

EN 295-1:2013

Vitrified clay pipe systems for drains and sewers — Part 1: Requirements for pipes, fittings and joints

EN 295-10:2005

1.11.2013

1.11.2014

CEN

EN 295-4:2013

Vitrified clay pipe systems for drains and sewers — Part 4: Requirements for adaptors, connectors and flexible couplings

EN 295-10:2005

1.11.2013

1.11.2014

CEN

EN 295-5:2013

Vitrified clay pipe systems for drains and sewers — Part 5: Requirements for perforated pipes and fittings

EN 295-10:2005

1.11.2013

1.11.2014

CEN

EN 295-6:2013

Vitrified clay pipes systems for drain and sewers — Part 6: Requirements for components of manholes and inspection chambers

EN 295-10:2005

1.11.2013

1.11.2014

CEN

EN 295-7:2013

Vitrified clay pipe systems for drains and sewers — Part 7: Requirements for pipes and joints for pipe jacking

EN 295-10:2005

1.11.2013

1.11.2014

CEN

EN 331:1998

Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings

 

1.9.2011

1.9.2012

 

EN 331:1998/A1:2010

 

1.9.2011

1.9.2012

CEN

EN 413-1:2011

Masonry cement — Part 1: Composition, specifications and conformity criteria

EN 413-1:2004

1.2.2012

1.2.2013

CEN

EN 416-1:2009

Single burner gas-fired overhead radiant tube heaters for non-domestic use — Part 1: Safety

 

1.12.2009

1.12.2010

CEN

EN 438-7:2005

High-pressure decorative laminates (HPL) — Sheets based on thermosetting resins (Usually called Laminates) — Part 7: Compact laminate and HPL composite panels for internal and external wall and ceiling finishes

 

1.11.2005

1.11.2006

CEN

EN 442-1:2014

Radiators and convectors — Part 1: Technical specifications and requirements

EN 442-1:1995

13.11.2015

13.11.2016

CEN

EN 450-1:2012

Fly ash for concrete — Part 1: Definition, specifications and conformity criteria

EN 450-1:2005+A1:2007

1.5.2013

1.5.2014

CEN

EN 459-1:2010

Building lime — Part 1: Definitions, specifications and conformity criteria

EN 459-1:2001

1.6.2011

1.6.2012

CEN

EN 490:2011

Concrete roofing tiles and fittings for roof covering and wall cladding — Product specifications

EN 490:2004

1.8.2012

1.8.2012

CEN

EN 492:2012

Fibre-cement slates and fittings — Product specification and test methods

EN 492:2004

1.7.2013

1.7.2013

CEN

EN 494:2012+A1:2015

Fibre-cement profiled sheets and fittings — Product specification and test methods

EN 494:2012

8.4.2016

8.4.2017

CEN

EN 516:2006

Prefabricated accessories for roofing — Installations for roof access — Walkways, treads and steps

 

1.11.2006

1.11.2007

CEN

EN 517:2006

Prefabricated accessories for roofing — Roof safety hooks

 

1.12.2006

1.12.2007

CEN

EN 520:2004+A1:2009

Gypsum plasterboards — Definitions, requirements and test methods

EN 520:2004

1.6.2010

1.12.2010

CEN

EN 523:2003

Steel strip sheaths for prestressing tendons — Terminology, requirements, quality control

 

1.6.2004

1.6.2005

CEN

EN 534:2006+A1:2010

Corrugated bitumen sheets — Product specification and test methods

EN 534:2006

1.1.2011

1.1.2011

CEN

EN 544:2011

Bitumen shingles with mineral and/or synthetic reinforcements — Product specification and test methods

EN 544:2005

1.4.2012

1.4.2012

CEN

EN 572-9:2004

Glass in building — Basic soda lime silicate glass products — Part 9: Evaluation of conformity/Product standard

 

1.9.2005

1.9.2006

CEN

EN 588-2:2001

Fibre cement pipes for drains and sewers — Part 2: Manholes and inspection chambers

 

1.10.2002

1.10.2003

CEN

EN 598:2007+A1:2009

Ductile iron pipes, fittings, accessories and their joints for sewerage applications — Requirements and test methods

EN 598:2007

1.4.2010

1.4.2011

CEN

EN 621:2009

Non-domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW, without a fan to assist transportation of combustion air and/or combustion products

 

1.8.2010

1.8.2011

CEN

EN 671-1:2012

Fixed firefighting systems — Hose systems — Part 1: Hose reels with semi-rigid hose

EN 671-1:2001

1.3.2013

1.7.2013

CEN

EN 671-2:2012

Fixed firefighting systems — Hose systems — Part 2: Hose systems with lay-flat hose

EN 671-2:2001

1.3.2013

1.7.2013

CEN

EN 681-1:1996

Elastomeric seals — Materials requirements for pipe joint seals used in water and drainage applications — Part 1: Vulcanized rubber

 

1.1.2003

1.1.2009

 

EN 681-1:1996/A2:2002

 

1.1.2003

1.1.2004

 

EN 681-1:1996/A3:2005

 

1.1.2008

1.1.2009

 

EN 681-1:1996/A1:1998

 

1.1.2003

1.1.2004

CEN

EN 681-2:2000

Elastomeric Seals — Materials requirements for pipe joint seals used in water and drainage applications — Part 2: Thermoplastic elastomers

 

1.1.2003

1.1.2004

 

EN 681-2:2000/A1:2002

 

1.1.2003

1.1.2004

 

EN 681-2:2000/A2:2005

 

1.1.2010

1.1.2010

CEN

EN 681-3:2000

Elastomeric seals — Materials requirements for pipe joint seals used in water and drainage applications — Part 3: Cellular materials of vulcanized rubber

 

1.1.2003

1.1.2004

 

EN 681-3:2000/A1:2002

 

1.1.2003

1.1.2004

 

EN 681-3:2000/A2:2005

 

1.7.2012

1.7.2012

CEN

EN 681-4:2000

Elastomeric seals — Materials requirements for pipe joint seals used in water and drainage applications — Part 4: Cast polyurethane sealing elements

 

1.1.2003

1.1.2004

 

EN 681-4:2000/A1:2002

 

1.1.2003

1.1.2004

 

EN 681-4:2000/A2:2005

 

1.7.2012

1.7.2012

CEN

EN 682:2002

Elastomeric Seals — Materials requirements for seals used in pipes and fittings carrying gas and hydrocarbon fluids

 

1.10.2002

1.12.2003

 

EN 682:2002/A1:2005

 

1.7.2012

1.7.2012

CEN

EN 771-1:2011+A1:2015

Specification for masonry units — Part 1: Clay masonry units

EN 771-1:2011

10.6.2016

10.6.2017

CEN

EN 771-2:2011+A1:2015

Specification for masonry units — Part 2: Calcium silicate masonry units

EN 771-2:2011

10.6.2016

10.6.2017

CEN

EN 771-3:2011+A1:2015

Specification for masonry units — Part 3: Aggregate concrete masonry units (Dense and lightweight aggregates)

EN 771-3:2011

10.6.2016

10.6.2017

CEN

EN 771-4:2011+A1:2015

Specification for masonry units — Part 4: Autoclaved aerated concrete masonry units

EN 771-4:2011

10.6.2016

10.6.2017

CEN

EN 771-5:2011+A1:2015

Specification for masonry units — Part 5: Manufactured stone masonry units

EN 771-5:2011

10.6.2016

10.6.2017

CEN

EN 771-6:2011+A1:2015

Specification for masonry units — Part 6: Natural stone masonry units

EN 771-6:2011

8.4.2016

8.4.2017

CEN

EN 777-1:2009

Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use — Part 1: System D — Safety

 

1.11.2009

1.11.2010

CEN

EN 777-2:2009

Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use — Part 2: System E — Safety

 

1.11.2009

1.11.2010

CEN

EN 777-3:2009

Multi-burner gas-fired overhead radiant tube heater systems for non domestic use — Part 3: System F — Safety

 

1.11.2009

1.11.2010

CEN

EN 777-4:2009

Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use — Part 4: System H — Safety

 

1.11.2009

1.11.2010

CEN

EN 778:2009

Domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 70 kW, without a fan to assist transportation of combustion air and/or combustion products

 

1.8.2010

1.8.2011

CEN

EN 845-1:2013+A1:2016

Specification for ancillary components for masonry — Part 1: Wall ties, tension straps, hangers and brackets

EN 845-1:2013

10.3.2017

10.3.2018

CEN

EN 845-2:2013+A1:2016

Specification for ancillary components for masonry — Part 2: Lintels

EN 845-2:2013

10.3.2017

10.3.2018

CEN

EN 845-3:2013+A1:2016

Specification for ancillary components for masonry — Part 3: Bed joint reinforcement of steel meshwork

EN 845-3:2013

10.3.2017

10.3.2018

CEN

EN 858-1:2002

Separator systems for light liquids (e.g. oil and petrol) — Part 1: Principles of product design, performance and testing, marking and quality control

 

1.9.2005

1.9.2006

 

EN 858-1:2002/A1:2004

 

1.9.2005

1.9.2006

CEN

EN 877:1999

Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings — Requirements, test methods and quality assurance

 

1.1.2008

1.9.2009

 

EN 877:1999/A1:2006

 

1.1.2008

1.9.2009

 

EN 877:1999/A1:2006/AC:2008

 

1.1.2009

1.1.2009

CEN

EN 934-2:2009+A1:2012

Admixtures for concrete, mortar and grout — Part 2: Concrete admixtures — Definitions, requirements, conformity, marking and labelling

EN 934-2:2009

1.3.2013

1.9.2013

CEN

EN 934-3:2009+A1:2012

Admixtures for concrete, mortar and grout — Part 3: Admixtures for masonry mortar — Definitions, requirements, conformity and marking and labelling

EN 934-3:2009

1.3.2013

1.9.2013

CEN

EN 934-4:2009

Admixtures for concrete, mortar and grout — Part 4: Admixtures for grout for prestressing tendons — Definitions, requirements, conformity, marking and labelling

EN 934-4:2001

1.3.2010

1.3.2011

CEN

EN 934-5:2007

Admixtures for concrete, mortar and grout — Part 5: Admixtures for sprayed concrete — Definitions, requirements, conformity, marking and labelling

 

1.1.2009

1.1.2010

CEN

EN 969:2009

Ductile iron pipes, fittings, accessories and their joints for gas pipelines — Requirements and test methods

 

1.1.2010

1.1.2011

CEN

EN 997:2012

WC pans and WC suites with integral trap

EN 997:2003

1.12.2012

1.6.2013

 

EN 997:2012/AC:2012

 

1.3.2013

1.3.2013

CEN

EN 998-1:2016

Specification for mortar for masonry — Part 1: Rendering and plastering mortar

EN 998-1:2010

11.8.2017

11.8.2017

CEN

EN 998-2:2016

Specification for mortar for masonry — Part 2: Masonry mortar

EN 998-2:2010

11.8.2017

11.8.2017

CEN

EN 1013:2012+A1:2014

Light transmitting single skin profiled plastics sheets for internal and external roofs, walls and ceilings — Requirements and test methods

EN 1013:2012

10.7.2015

10.7.2016

CEN

EN 1020:2009

Non-domestic forced convection gas-fired air heaters for space heating not exceeding a net heat input of 300 kW incorporating a fan to assist transportation of combustion air or combustion products

 

1.8.2010

1.8.2011

CEN

EN 1036-2:2008

Glass in building — Mirrors from silver-coated float glass for internal use — Part 2: Evaluation of conformity; product standard

 

1.1.2009

1.1.2010

CEN

EN 1051-2:2007

Glass in building — Glass blocks and glass pavers — Part 2: Evaluation of conformity/Product standard

 

1.1.2009

1.1.2010

CEN

EN 1057:2006+A1:2010

Copper and copper alloys — Seamless, round copper tubes for water and gas in sanitary and heating applications

EN 1057:2006

1.12.2010

1.12.2010

CEN

EN 1090-1:2009+A1:2011

Execution of steel structures and aluminium structures — Part 1: Requirements for conformity assessment of structural components

EN 1090-1:2009

1.9.2012

1.7.2014

CEN

EN 1096-4:2004

Glass in building — Coated glass — Part 4: Evaluation of conformity/Product standard

 

1.9.2005

1.9.2006

CEN

EN 1123-1:1999

Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems — Part 1: Requirements, testing, quality control

 

1.6.2005

1.6.2006

 

EN 1123-1:1999/A1:2004

 

1.6.2005

1.6.2006

CEN

EN 1124-1:1999

Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems — Part 1: Requirements, testing, quality control

 

1.6.2005

1.6.2006

 

EN 1124-1:1999/A1:2004

 

1.6.2005

1.6.2006

CEN

EN 1125:2008

Building hardware — Panic exit devices operated by a horizontal bar, for use on escape routes — Requirements and test methods

EN 1125:1997

1.1.2009

1.1.2010

CEN

EN 1154:1996

Building hardware — Controlled door closing devices — Requirements and test methods

 

1.10.2003

1.10.2004

 

EN 1154:1996/A1:2002

 

1.10.2003

1.10.2004

 

EN 1154:1996/A1:2002/AC:2006

 

1.1.2010

1.1.2010

CEN

EN 1155:1997

Building hardware — Electrically powered hold-open devices for swing doors — Requirements and test methods

 

1.10.2003

1.10.2004

 

EN 1155:1997/A1:2002

 

1.10.2003

1.10.2004

 

EN 1155:1997/A1:2002/AC:2006

 

1.1.2010

1.1.2010

CEN

EN 1158:1997

Building hardware — Door coordinator devices — Requirements and test methods

 

1.10.2003

1.10.2004

 

EN 1158:1997/A1:2002/AC:2006

 

1.6.2006

1.6.2006

 

EN 1158:1997/A1:2002

 

1.10.2003

1.10.2004

CEN

EN 1168:2005+A3:2011

Precast concrete products — Hollow core slabs

EN 1168:2005+A2:2009

1.7.2012

1.7.2013

CEN

EN 1279-5:2005+A2:2010

Glass in building — Insulating glass units — Part 5: Evaluation of conformity

EN 1279-5:2005+A1:2008

1.2.2011

1.2.2012

CEN

EN 1304:2005

Clay roofing tiles and fittings — Product definitions and specifications

 

1.2.2006

1.2.2007

CEN

EN 1317-5:2007+A2:2012

Road restraint systems — Part 5: Product requirements and evaluation of conformity for vehicle restraint systems

EN 1317-5:2007+A1:2008

1.1.2013

1.1.2013

 

EN 1317-5:2007+A2:2012/AC:2012

 

1.3.2013

1.3.2013

CEN

EN 1319:2009

Domestic gas-fired forced convection air heaters for space heating, with fan-assisted burners not exceeding a net heat input of 70 kW

 

1.10.2010

1.10.2011

CEN

EN 1337-3:2005

Structural bearings — Part 3: Elastomeric bearings

 

1.1.2006

1.1.2007

CEN

EN 1337-4:2004

Structural bearings — Part 4: Roller bearings

 

1.2.2005

1.2.2006

 

EN 1337-4:2004/AC:2007

 

1.1.2008

1.1.2008

CEN

EN 1337-5:2005

Structural bearings — Part 5: Pot bearings

 

1.1.2006

1.1.2007

CEN

EN 1337-6:2004

Structural bearings — Part 6: Rocker bearings

 

1.2.2005

1.2.2006

CEN

EN 1337-7:2004

Structural bearings — Part 7: Spherical and cylindrical PTFE bearings

EN 1337-7:2000

1.12.2004

1.6.2005

CEN

EN 1337-8:2007

Structural bearings — Part 8: Guide Bearings and Restraint Bearings

 

1.1.2009

1.1.2010

CEN

EN 1338:2003

Concrete paving blocks — Requirements and test methods

 

1.3.2004

1.3.2005

 

EN 1338:2003/AC:2006

 

1.1.2007

1.1.2007

CEN

EN 1339:2003

Concrete paving flags — Requirements and test methods

 

1.3.2004

1.3.2005

 

EN 1339:2003/AC:2006

 

1.1.2007

1.1.2007

CEN

EN 1340:2003

Concrete kerb units — Requirements and test methods

 

1.2.2004

1.2.2005

 

EN 1340:2003/AC:2006

 

1.1.2007

1.1.2007

CEN

EN 1341:2012

Slabs of natural stone for external paving — Requirements and test methods

EN 1341:2001

1.9.2013

1.9.2013

CEN

EN 1342:2012

Setts of natural stone for external paving — Requirements and test methods

EN 1342:2001

1.9.2013

1.9.2013

CEN

EN 1343:2012

Kerbs of natural stone for external paving — Requirements and test methods

EN 1343:2001

1.9.2013

1.9.2013

CEN

EN 1344:2013

Clay pavers — Requirements and test methods

EN 1344:2002

8.8.2014

8.8.2016

 

EN 1344:2013/AC:2015

 

 

 

CEN

EN 1423:2012

Road marking materials — Drop on materials — Glass beads, antiskid aggregates and mixtures of the two

EN 1423:1997

1.11.2012

1.11.2012

 

EN 1423:2012/AC:2013

 

1.7.2013

1.7.2013

CEN

EN 1433:2002

Drainage channels for vehicular and pedestrian areas — Classification, design and testing requirements, marking and evaluation of conformity

 

1.8.2003

1.8.2004

 

EN 1433:2002/A1:2005

 

1.1.2006

1.1.2006

CEN

EN 1457-1:2012

Chimneys — Clay/ceramic flue liners — Part 1: Flue liners operating under dry conditions — Requirements and test methods

EN 1457:1999

1.11.2012

1.11.2013

CEN

EN 1457-2:2012

Chimneys — Clay/ceramic flue liners — Part 2: Flue liners operating under wet conditions — Requirements and test methods

EN 1457:1999

1.11.2012

1.11.2013

CEN

EN 1463-1:2009

Road marking materials — Retroreflecting road studs — Part 1: Initial performance requirements

EN 1463-1:1997

1.1.2010

1.1.2011

CEN

EN 1469:2015

Natural stone products — Slabs for cladding — Requirements

EN 1469:2004

8.4.2016

8.4.2017

CEN

EN 1504-2:2004

Products and systems for the protection and repair of concrete structures — Definitions, requirements, quality control and evaluation of conformity — Part 2: Surface protection systems for concrete

 

1.9.2005

1.1.2009

CEN

EN 1504-3:2005

Products and systems for the protection and repair of concrete structures — Definitions, requirements, quality control and evaluation of conformity — Part 3: Structural and non-structural repair

 

1.10.2006

1.1.2009

CEN

EN 1504-4:2004

Products and systems for the protection and repair of concrete structures — Definitions, requirements, quality control and evaluation of conformity — Part 4: Structural bonding

 

1.9.2005

1.1.2009

CEN

EN 1504-5:2004

Products and systems for the protection and repair of concrete structures — Definitions, requirements, quality control and evaluation of conformity — Part 5: Concrete injection

 

1.10.2005

1.1.2009

CEN

EN 1504-6:2006

Products and systems for the protection and repair of concrete structures — Definitions, requirements, quality control and evaluation of conformity — Part 6: Anchoring of reinforcing steel bar

 

1.6.2007

1.1.2009

CEN

EN 1504-7:2006

Products and systems for the protection and repair of concrete structures — Definitions, requirements, quality control and evaluation of conformity — Part 7: Reinforcement corrosion protection

 

1.6.2007

1.1.2009

CEN

EN 1520:2011

Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non-structural reinforcement

EN 1520:2002

1.1.2012

1.1.2013

CEN

EN 1748-1-2:2004

Glass in building — Special basic products — Borosilicate glasses — Part 1-2: Evaluation of conformity/Product standard

 

1.9.2005

1.9.2006

CEN

EN 1748-2-2:2004

Glass in building — Special basic products — Glass ceramics — Part 2-2: Evaluation of conformity/Product standard

 

1.9.2005

1.9.2006

CEN

EN 1806:2006

Chimneys — Clay/ceramic flue blocks for single wall chimneys — Requirements and test methods

 

1.5.2007

1.5.2008

CEN

EN 1825-1:2004

Grease separators — Part 1: Principles of design, performance and testing, marking and quality control

 

1.9.2005

1.9.2006

 

EN 1825-1:2004/AC:2006

 

1.1.2007

1.1.2007

CEN

EN 1856-1:2009

Chimneys — Requirements for metal chimneys — Part 1: System chimney products

EN 1856-1:2003

1.3.2010

1.3.2011

CEN

EN 1856-2:2009

Chimneys — Requirements for metal chimneys — Part 2: Metal flue liners and connecting flue pipes

EN 1856-2:2004

1.3.2010

1.3.2011

CEN

EN 1857:2010

Chimneys — Components — Concrete flue liners

EN 1857:2003+A1:2008

1.1.2011

1.1.2012

CEN

EN 1858:2008+A1:2011

Chimneys — Components — Concrete flue blocks

EN 1858:2008

1.4.2012

1.4.2013

CEN

EN 1863-2:2004

Glass in building — Heat strengthened soda lime silicate glass — Part 2: Evaluation of conformity/Product standard

 

1.9.2005

1.9.2006

CEN

EN 1873:2005

Prefabricated accessories for roofing — Individual roof lights of plastics — Product specification and test methods

 

1.10.2006

1.10.2009

CEN

EN 1916:2002

Concrete pipes and fittings, unreinforced, steel fibre and reinforced

 

1.8.2003

23.11.2004

 

EN 1916:2002/AC:2008

 

1.1.2009

1.1.2009

CEN

EN 1917:2002

Concrete manholes and inspection chambers, unreinforced, steel fibre and reinforced

 

1.8.2003

23.11.2004

 

EN 1917:2002/AC:2008

 

1.1.2009

1.1.2009

CEN

EN 1935:2002

Building hardware — Single-axis hinges — Requirements and test methods

 

1.10.2002

1.12.2003

 

EN 1935:2002/AC:2003

 

1.1.2007

1.1.2007

CEN

EN 10025-1:2004

Hot rolled products of structural steels — Part 1: General technical delivery conditions

 

1.9.2005

1.9.2006

CEN

EN 10088-4:2009

Stainless steels — Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes

 

1.2.2010

1.2.2011

CEN

EN 10088-5:2009

Stainless steels — Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes

 

1.1.2010

1.1.2011

CEN

EN 10210-1:2006

Hot finished structural hollow sections of non-alloy and fine grain steels — Part 1: Technical delivery conditions

 

1.2.2007

1.2.2008

CEN

EN 10219-1:2006

Cold formed welded structural hollow sections of non-alloy and fine grain steels — Part 1: Technical delivery conditions

 

1.2.2007

1.2.2008

CEN

EN 10224:2002

Non-alloy steel tubes and fittings for the conveyance of aqueous liquids including water for human consumption — Technical delivery conditions

 

1.4.2006

1.4.2007

 

EN 10224:2002/A1:2005

 

1.4.2006

1.4.2007

CEN

EN 10255:2004+A1:2007

Non-Alloy steel tubes suitable for welding and threading — Technical delivery conditions

 

1.1.2010

1.1.2011

CEN

EN 10311:2005

Joints for the connection of steel tubes and fittings for the conveyance of water and other aqueous liquids

 

1.3.2006

1.3.2007

CEN

EN 10312:2002

Welded stainless steel tubes for the conveyance of aqueous liquids including water for human consumption — Technical delivery conditions

 

1.4.2006

1.4.2007

 

EN 10312:2002/A1:2005

 

1.4.2006

1.4.2007

CEN

EN 10340:2007

Steel castings for structural uses

 

1.1.2010

1.1.2011

 

EN 10340:2007/AC:2008

 

1.1.2010

1.1.2010

CEN

EN 10343:2009

Steels for quenching and tempering for construction purposes — Technical delivery conditions

 

1.1.2010

1.1.2011

CEN

EN 12004:2007+A1:2012

Adhesives for tiles — Requirements, evaluation of conformity, classification and designation

EN 12004:2007

1.4.2013

1.7.2013

CEN

EN 12050-1:2001

Wastewater lifting plants for buildings and sites — Principles of construction and testing — Part 1: Lifting plants for wastewater containing faecal matter

 

1.11.2001

1.11.2002

CEN

EN 12050-2:2000

Wastewater lifting plants for buildings and sites — Principles of construction and testing — Part 2: Lifting plants for faecal-free wastewater

 

1.10.2001

1.10.2002

CEN

EN 12050-3:2000

Wastewater lifting plants for buildings and sites — Principles of construction and testing — Part 3: Lifting plants for wastewater containing faecal matter for limited applications

 

1.10.2001

1.10.2002

CEN

EN 12050-4:2000

Wastewater lifting plants for buildings and sites — Principles of construction and testing — Part 4: Non-return valves for faecal-free wastewater and wastewater containing faecal matter

 

1.10.2001

1.10.2002

CEN

EN 12057:2004

Natural stone products — Modular tiles — Requirements

 

1.9.2005

1.9.2006

CEN

EN 12058:2004

Natural stone products — Slabs for floors and stairs — Requirements

 

1.9.2005

1.9.2006

CEN

EN 12094-1:2003

Fixed firefighting systems — Components for gas extinguishing systems — Part 1: Requirements and test methods for electrical automatic control and delay devices

 

1.2.2004

1.5.2006

CEN

EN 12094-2:2003

Fixed firefighting systems — Components for gas extinguishing systems — Part 2: Requirements and test methods for non-electrical automatic control and delay devices

 

1.2.2004

1.5.2006

CEN

EN 12094-3:2003

Fixed firefighting systems — Components for gas extinguishing systems — Part 3: Requirements and test methods for manual triggering and stop devices

 

1.1.2004

1.9.2005

CEN

EN 12094-4:2004

Fixed firefighting systems — Components for gas extinguishing systems — Part 4: Requirements and test methods for container valve assemblies and their actuators

 

1.5.2005

1.8.2007

CEN

EN 12094-5:2006

Fixed firefighting systems — Components for gas extinguishing systems — Part 5: Requirements and test methods for high and low pressure selector valves and their actuators

EN 12094-5:2000

1.2.2007

1.5.2009

CEN

EN 12094-6:2006

Fixed firefighting systems — Components for gas extinguishing systems — Part 6: Requirements and test methods for non-electrical disable devices

EN 12094-6:2000

1.2.2007

1.5.2009

CEN

EN 12094-7:2000

Fixed firefighting systems — Components for gas extinguishing systems — Part 7: Requirements and test methods for nozzles for CO2 systems

 

1.10.2001

1.4.2004

 

EN 12094-7:2000/A1:2005

 

1.11.2005

1.11.2006

CEN

EN 12094-8:2006

Fixed firefighting systems — Components for gas extinguishing systems — Part 8: Requirements and test methods for connectors

 

1.2.2007

1.5.2009

CEN

EN 12094-9:2003

Fixed firefighting systems — Components for gas extinguishing systems — Part 9: Requirements and test methods for special fire detectors

 

1.1.2004

1.9.2005

CEN

EN 12094-10:2003

Fixed firefighting systems — Components for gas extinguishing systems — Part 10: Requirements and test methods for pressure gauges and pressure switches

 

1.2.2004

1.5.2006

CEN

EN 12094-11:2003

Fixed firefighting systems — Components for gas extinguishing systems — Part 11: Requirements and test methods for mechanical weighing devices

 

1.1.2004

1.9.2005

CEN

EN 12094-12:2003

Fixed firefighting systems — Components for gas extinguishing systems — Part 12: Requirements and test methods for pneumatic alarm devices

 

1.1.2004

1.9.2005

CEN

EN 12094-13:2001

Fixed firefighting systems — Components for gas extinguishing systems — Part 13: Requirements and test methods for check valves and non-return valves

 

1.1.2002

1.4.2004

 

EN 12094-13:2001/AC:2002

 

1.1.2010

1.1.2010

CEN

EN 12101-1:2005

Smoke and heat control systems — Part 1: Specification for smoke barriers

 

1.6.2006

1.9.2008

 

EN 12101-1:2005/A1:2006

 

1.12.2006

1.9.2008

CEN

EN 12101-2:2003

Smoke and heat control systems — Part 2: Specification for natural smoke and heat exhaust ventilators

 

1.4.2004

1.9.2006

CEN

EN 12101-3:2015

Smoke and heat control systems — Part 3: Specification for powered smoke and heat control ventilators (Fans)

EN 12101-3:2002

8.4.2016

8.4.2017

CEN

EN 12101-6:2005

Smoke and heat control systems — Part 6: Specification for pressure differential systems — Kits

 

1.4.2006

1.4.2007

 

EN 12101-6:2005/AC:2006

 

1.1.2007

1.1.2007

CEN

EN 12101-7:2011

Smoke and heat control systems — Part 7: Smoke duct sections

 

1.2.2012

1.2.2013

CEN

EN 12101-8:2011

Smoke and heat control systems — Part 8: Smoke control dampers

 

1.2.2012

1.2.2013

CEN

EN 12101-10:2005

Smoke and heat control systems — Part 10: Power supplies

 

1.10.2006

1.5.2012

 

EN 12101-10:2005/AC:2007

 

1.1.2008

1.1.2008

CEN

EN 12150-2:2004

Glass in building — Thermally toughened soda lime silicate safety glass — Part 2: Evaluation of conformity/Product standard

 

1.9.2005

1.9.2006

CEN

EN 12209:2003

Building hardware — Locks and latches — Mechanically operated locks, latches and locking plates — Requirements and test methods

 

1.12.2004

1.6.2006

 

EN 12209:2003/AC:2005

 

1.6.2006

1.6.2006

CEN

EN 12259-1:1999 + A1:2001

Fixed firefighting systems — Components for sprinkler and water spray systems — Part 1: Sprinklers

 

1.4.2002

1.9.2005

 

EN 12259-1:1999 + A1:2001/A2:2004

 

1.3.2005

1.3.2006

 

EN 12259-1:1999 + A1:2001/A3:2006

 

1.11.2006

1.11.2007

CEN

EN 12259-2:1999

Fixed firefighting systems — Components for sprinkler and water spray systems — Part 2: Wet alarm valve assemblies

 

1.1.2002

1.8.2007

 

EN 12259-2:1999/A1:2001

 

1.1.2002

1.8.2007

 

EN 12259-2:1999/AC:2002

 

1.6.2005

1.6.2005

 

EN 12259-2:1999/A2:2005

 

1.9.2006

1.8.2007

CEN

EN 12259-3:2000

Fixed firefighting systems — Components for automatic sprinkler and water spray systems — Part 3: Dry alarm valve assemblies

 

1.1.2002

1.8.2007

 

EN 12259-3:2000/A1:2001

 

1.1.2002

1.8.2007

 

EN 12259-3:2000/A2:2005

 

1.9.2006

1.8.2007

CEN

EN 12259-4:2000

Fixed firefighting systems — Components for sprinkler and water spray systems — Part 4: Water motor alarms

 

1.1.2002

1.4.2004

 

EN 12259-4:2000/A1:2001

 

1.1.2002

1.4.2004

CEN

EN 12259-5:2002

Fixed firefighting systems — Components for sprinkler and water spray systems — Part 5: Water flow detectors

 

1.7.2003

1.9.2005

CEN

EN 12271:2006

Surface dressing — Requirements

 

1.1.2008

1.1.2011

CEN

EN 12273:2008

Slurry surfacing — Requirements

 

1.1.2009

1.1.2011

CEN

EN 12285-2:2005

Workshop fabricated steel tanks — Part 2: Horizontal cylindrical single skin and double skin tanks for the aboveground storage of flammable and non-flammable water polluting liquids

 

1.1.2006

1.1.2008

CEN

EN 12326-1:2014

Slate and stone for discontinuous roofing and external cladding — Part 1: Specifications for slate and carbonate slate

EN 12326-1:2004

13.2.2015

13.2.2016

CEN

EN 12337-2:2004

Glass in building — Chemically strengthened soda lime silicate glass — Part 2: Evaluation of conformity/Product standard

 

1.9.2005

1.9.2006

CEN

EN 12352:2006

Traffic control equipment — Warning and safety light devices

 

1.2.2007

1.2.2008

CEN

EN 12368:2006

Traffic control equipment — Signal heads

 

1.2.2007

1.2.2008

CEN

EN 12380:2002

Air admittance valves for drainage systems — Requirements, tests methods and evaluation of conformity

 

1.10.2003

1.10.2004

CEN

EN 12446:2011

Chimneys — Components — Concrete outer wall elements

EN 12446:2003

1.4.2012

1.4.2013

CEN

EN 12467:2012

Fibre-cement flat sheets — Product specification and test methods

EN 12467:2004

1.7.2013

1.7.2013

CEN

EN 12566-1:2000

Small wastewater treatment systems for up to 50 PT — Part 1: Prefabricated septic tanks

 

1.12.2004

1.12.2005

 

EN 12566-1:2000/A1:2003

 

1.12.2004

1.12.2005

CEN

EN 12566-3:2005+A2:2013

Small wastewater treatment systems for up to 50 PT — Part 3: Packaged and/or site assembled domestic wastewater treatment plants

EN 12566-3:2005+A1:2009

8.8.2014

8.8.2015

CEN

EN 12566-4:2007

Small wastewater treatment systems for up to 50 PT — Part 4: Septic tanks assembled in situ from prefabricated kits

 

1.1.2009

1.1.2010

CEN

EN 12566-6:2013

Small wastewater treatment systems for up to 50 PT — Part 6: Prefabricated treatment units for septic tank effluent

 

1.11.2013

1.11.2014

CEN

EN 12566-7:2013

Small wastewater treatment systems for up to 50 PT — Part 7: Prefabricated tertiary treatment units

 

8.8.2014

8.8.2015

CEN

EN 12591:2009

Bitumen and bituminous binders — Specifications for paving grade bitumens

 

1.1.2010

1.1.2011

CEN

EN 12602:2016

Prefabricated reinforced components of autoclaved aerated concrete

EN 12602:2008+A1:2013

10.3.2017

10.3.2018

CEN

EN 12620:2002+A1:2008

Aggregates for concrete

EN 12620:2002

1.1.2009

1.1.2010

CEN

EN 12676-1:2000

Anti-glare systems for roads — Part 1: Performance and characteristics

 

1.2.2004

1.2.2006

 

EN 12676-1:2000/A1:2003

 

1.2.2004

1.2.2006

CEN

EN 12737:2004+A1:2007

Precast concrete products — Floor slats for livestock

 

1.1.2009

1.1.2010

CEN

EN 12764:2004+A1:2008

Sanitary appliances — Specification for whirlpool baths

EN 12764:2004

1.1.2009

1.1.2010

CEN

EN 12794:2005+A1:2007

Precast concrete products — Foundation piles

EN 12794:2005

1.2.2008

1.2.2009

 

EN 12794:2005+A1:2007/AC:2008

 

1.8.2009

1.8.2009

CEN

EN 12809:2001

Residential independent boilers fired by solid fuel — Nominal heat output up to 50 kW — Requirements and test methods

 

1.7.2005

1.7.2007

 

EN 12809:2001/A1:2004

 

1.7.2005

1.7.2007

 

EN 12809:2001/A1:2004/AC:2007

 

1.1.2008

1.1.2008

 

EN 12809:2001/AC:2006

 

1.1.2008

1.1.2008

CEN

EN 12815:2001

Residential cookers fired by solid fuel — Requirements and test methods

 

1.7.2005

1.7.2007

 

EN 12815:2001/AC:2006

 

1.1.2007

1.1.2007

 

EN 12815:2001/A1:2004/AC:2007

 

1.1.2008

1.1.2008

 

EN 12815:2001/A1:2004

 

1.7.2005

1.7.2007

CEN

EN 12839:2012

Precast concrete products — Elements for fences

EN 12839:2001

1.10.2012

1.10.2013

CEN

EN 12843:2004

Precast concrete products — Masts and poles

 

1.9.2005

1.9.2007

CEN

EN 12859:2011

Gypsum blocks — Definitions, requirements and test methods

EN 12859:2008

1.12.2011

1.12.2012

CEN

EN 12860:2001

Gypsum based adhesives for gypsum blocks — Definitions, requirements and test methods

 

1.4.2002

1.4.2003

 

EN 12860:2001/AC:2002

 

1.1.2010

1.1.2010

CEN

EN 12878:2005

Pigments for the colouring of building materials based on cement and/or lime — Specifications and methods of test

 

1.3.2006

1.3.2007

 

EN 12878:2005/AC:2006

 

1.1.2007

1.1.2007

CEN

EN 12899-1:2007

Fixed, vertical road traffic signs — Part 1: Fixed signs

 

1.1.2009

1.1.2013

CEN

EN 12899-2:2007

Fixed, vertical road traffic signs — Part 2: Transilluminated traffic bollards (TTB)

 

1.1.2009

1.1.2013

CEN

EN 12899-3:2007

Fixed, vertical road traffic signs — Part 3: Delineator posts and retroreflectors

 

1.1.2009

1.1.2013

CEN

EN 12951:2004

Prefabricated accessories for roofing — Permanently fixed roof ladders — Product specification and test methods

 

1.9.2005

1.9.2006

CEN

EN 12966-1:2005+A1:2009

Road vertical signs — Variable message traffic signs — Part 1: Product standard

 

1.8.2010

1.8.2010

CEN

EN 13024-2:2004

Glass in building — Thermally toughened borosilicate safety glass — Part 2: Evaluation of conformity/Product standard

 

1.9.2005

1.9.2006

CEN

EN 13043:2002

Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked areas

 

1.7.2003

1.6.2004

 

EN 13043:2002/AC:2004

 

1.6.2006

1.6.2006

CEN

EN 13055-1:2002

Lightweight aggregates — Part 1: Lightweight aggregates for concrete, mortar and grout

 

1.3.2003

1.6.2004

 

EN 13055-1:2002/AC:2004

 

1.1.2010

1.1.2010

CEN

EN 13055-2:2004

Lightweight aggregates — Part 2: Lightweight aggregates for bituminous mixtures and surface treatments and for unbound and bound applications

 

1.5.2005

1.5.2006

CEN

EN 13063-1:2005+A1:2007

Chimneys — System chimneys with clay/ceramic flue liners — Part 1: Requirements and test methods for sootfire resistance

EN 13063-1:2005

1.5.2008

1.5.2009

CEN

EN 13063-2:2005+A1:2007

Chimneys — System chimneys with clay/ceramic flue liners — Part 2: Requirements and test methods under wet conditions

EN 13063-2:2005

1.5.2008

1.5.2009

CEN

EN 13063-3:2007

Chimneys — System chimneys with clay/ceramic flue liners — Part 3: Requirements and test methods for air flue system chimneys

 

1.5.2008

1.5.2009

CEN

EN 13069:2005

Chimneys — Clay/ceramic outer walls for system chimneys — Requirements and test methods

 

1.5.2006

1.5.2007

CEN

EN 13084-5:2005

Free-standing chimneys — Part 5: Material for brick liners — Product specifications

 

1.4.2006

1.4.2007

 

EN 13084-5:2005/AC:2006

 

1.1.2007

1.1.2007

CEN

EN 13084-7:2012

Free-standing chimneys — Part 7: Product specifications of cylindrical steel fabrications for use in single wall steel chimneys and steel liners

EN 13084-7:2005

1.9.2013

1.9.2013

CEN

EN 13101:2002

Steps for underground man entry chambers — Requirements, marking, testing and evaluation of conformity

 

1.8.2003

1.8.2004

CEN

EN 13108-1:2006

Bituminous mixtures — Material specifications — Part 1: Asphalt Concrete

 

1.3.2007

1.3.2008

 

EN 13108-1:2006/AC:2008

 

1.1.2009

1.1.2009

CEN

EN 13108-2:2006

Bituminous mixtures — Material specifications — Part 2: Asphalt Concrete for very thin layers

 

1.3.2007

1.3.2008

 

EN 13108-2:2006/AC:2008

 

1.1.2009

1.1.2009

CEN

EN 13108-3:2006

Bituminous mixtures — Material specifications — Part 3: Soft Asphalt

 

1.3.2007

1.3.2008

 

EN 13108-3:2006/AC:2008

 

1.1.2009

1.1.2009

CEN

EN 13108-4:2006

Bituminous mixtures — Material specifications — Part 4: Hot Rolled Asphalt

 

1.3.2007

1.3.2008

 

EN 13108-4:2006/AC:2008

 

1.1.2009

1.1.2009

CEN

EN 13108-5:2006

Bituminous mixtures — Material specifications — Part 5: Stone Mastic Asphalt

 

1.3.2007

1.3.2008

 

EN 13108-5:2006/AC:2008

 

1.1.2009

1.1.2009

CEN

EN 13108-6:2006

Bituminous mixtures — Material specifications — Part 6: Mastic Asphalt

 

1.3.2007

1.3.2008

 

EN 13108-6:2006/AC:2008

 

1.1.2009

1.1.2009

CEN

EN 13108-7:2006

Bituminous mixtures — Material specifications — Part 7: Porous Asphalt

 

1.3.2007

1.3.2008

 

EN 13108-7:2006/AC:2008

 

1.1.2009

1.1.2009

CEN

EN 13139:2002

Aggregates for mortar

 

1.3.2003

1.6.2004

 

EN 13139:2002/AC:2004

 

1.1.2010

1.1.2010

CEN

EN 13160-1:2003

Leak detection systems — Part 1: General principles

 

1.3.2004

1.3.2005

CEN

EN 13162:2012+A1:2015

Thermal insulation products for buildings — Factory made mineral wool (MW) products — Specification

EN 13162:2012

10.7.2015

10.7.2016

CEN

EN 13163:2012+A1:2015

Thermal insulation products for buildings — Factory made expanded polystyrene (EPS) products — Specification

EN 13163:2012

10.7.2015

10.7.2016

CEN

EN 13164:2012+A1:2015

Thermal insulation products for buildings — Factory made extruded polystyrene foam (XPS) products — Specification

EN 13164:2012

10.7.2015

10.7.2016

CEN

EN 13165:2012+A2:2016

Thermal insulation products for buildings — Factory made rigid polyurethane foam (PU) products — Specification

EN 13165:2012+A1:2015

14.10.2016

14.10.2017

CEN

EN 13166:2012+A2:2016

Thermal insulation products for buildings — Factory made phenolic foam (PF) products — Specification

EN 13166:2012+A1:2015

14.10.2016

14.10.2017

CEN

EN 13167:2012+A1:2015

Thermal insulation products for buildings — Factory made cellular glass (CG) products — Specification

EN 13167:2012

10.7.2015

10.7.2016

CEN

EN 13168:2012+A1:2015

Thermal insulation products for buildings — Factory made wood wool (WW) products — Specification

EN 13168:2012

10.7.2015

10.7.2016

CEN

EN 13169:2012+A1:2015

Thermal insulation products for buildings — Factory made expanded perlite board (EPB) products — Specification

EN 13169:2012

10.7.2015

10.7.2016

CEN

EN 13170:2012+A1:2015

Thermal insulation products for buildings — Factory made products of expanded cork (ICB) — Specification

EN 13170:2012

10.7.2015

10.7.2016

CEN

EN 13171:2012+A1:2015

Thermal insulation products for buildings — Factory made wood fibre (WF) products — Specification

EN 13171:2012

10.7.2015

10.7.2016

CEN

EN 13224:2011

Precast concrete products — Ribbed floor elements

EN 13224:2004+A1:2007

1.8.2012

1.8.2013

CEN

EN 13225:2013

Precast concrete products — Linear structural elements

EN 13225:2004

8.8.2014

8.8.2015

CEN

EN 13229:2001

Inset appliances including open fires fired by solid fuels — Requirements and test methods

 

1.7.2005

1.7.2007

 

EN 13229:2001/AC:2006

 

1.7.2007

1.7.2007

 

EN 13229:2001/A2:2004/AC:2007

 

1.1.2008

1.1.2008

 

EN 13229:2001/A2:2004

 

1.7.2005

1.7.2007

 

EN 13229:2001/A1:2003

 

1.6.2006

1.6.2007

CEN

EN 13240:2001

Roomheaters fired by solid fuel — Requirements and test methods

 

1.7.2005

1.7.2007

 

EN 13240:2001/A2:2004

 

1.7.2005

1.7.2007

 

EN 13240:2001/AC:2006

 

1.1.2007

1.1.2007

 

EN 13240:2001/A2:2004/AC:2007

 

1.1.2008

1.1.2008

CEN

EN 13241:2003+A2:2016

Industrial, commercial, garage doors and gates — Product standard, performance characteristics

EN 13241-1:2003+A1:2011

1.11.2016

1.11.2019

CEN

EN 13242:2002+A1:2007

Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction

EN 13242:2002

1.1.2009

1.1.2010

CEN

EN 13245-2:2008

Plastics — Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications — Part 2: PVC-U profiles and PVC-UE profiles for internal and external wall and ceiling finishes

 

1.7.2010

1.7.2012

 

EN 13245-2:2008/AC:2009

 

1.7.2010

1.7.2010

CEN

EN 13249:2016

Geotextiles and geotextile-related products — Characteristics required for use in the construction of roads and other trafficked areas (excluding railways and asphalt inclusion)

EN 13249:2000+A1:2015

10.3.2017

10.3.2018

CEN

EN 13250:2016

Geotextiles and geotextile-related products — Characteristics required for use in the construction of railways

EN 13250:2000+A1:2015

10.3.2017

10.3.2018

CEN

EN 13251:2016

Geotextiles and geotextile-related products — Characteristics required for use in earthworks, foundations and retaining structures

EN 13251:2000+A1:2015

10.3.2017

10.3.2018

CEN

EN 13252:2016

Geotextiles and geotextile-related products — Characteristics required for use in drainage systems

EN 13252:2000+A1:2015

10.3.2017

10.3.2018

CEN

EN 13253:2016

Geotextiles and geotextile-related products — Characteristics required for use in erosion control works (coastal protection, bank revetments)

EN 13253:2000+A1:2015

10.3.2017

10.3.2018

CEN

EN 13254:2016

Geotextiles and geotextile-related products — Characteristics required for the use in the construction of reservoirs and dams

EN 13254:2000+A1:2005+AC:2003

10.3.2017

10.3.2018

CEN

EN 13255:2016

Geotextiles and geotextile-related products — Characteristics required for use in the construction of canals

EN 13255:2000+A1:2005+AC:2003

10.3.2017

10.3.2018

CEN

EN 13256:2016

Geotextiles and geotextile-related products — Characteristics required for use in the construction of tunnels and underground structures

EN 13256:2000+A1:2005+AC:2003

10.3.2017

10.3.2018

CEN

EN 13257:2016

Geotextiles and geotextile-related products — Characteristics required for use in solid waste disposals

EN 13257:2000+A1:2005+AC:2003

10.3.2017

10.3.2018

CEN

EN 13263-1:2005+A1:2009

Silica fume for concrete — Part 1: Definitions, requirements and conformity criteria

EN 13263-1:2005

1.1.2010

1.1.2011

CEN

EN 13265:2016

Geotextiles and geotextile-related products — Characteristics required for use in liquid waste containment projects

EN 13265:2000+A1:2005+AC:2003

10.3.2017

10.3.2018

CEN

EN 13279-1:2008

Gypsum binders and gypsum plasters — Part 1: Definitions and requirements

EN 13279-1:2005

1.10.2009

1.10.2010

CEN

EN 13282-1:2013

Hydraulic road binders — Part 1: Rapid hardening hydraulic road binders — Composition, specifications and conformity criteria

 

1.11.2013

1.11.2014

CEN

EN 13310:2003

Kitchen sinks — Functional requirements and test methods

 

1.2.2004

1.2.2006

CEN

EN 13341:2005+A1:2011

Static thermoplastic tanks for above ground storage of domestic heating oils, kerosene and diesel fuels — Blow moulded and rotationally moulded polyethylene tanks and rotationally moulded tanks made of anionically polymerized polyamide 6 — Requirements and test methods

EN 13341:2005

1.10.2011

1.10.2011

CEN

EN 13361:2004

Geosynthetic barriers — Characteristics required for use in the construction of reservoirs and dams

 

1.9.2005

1.9.2006

 

EN 13361:2004/A1:2006

 

1.6.2007

1.6.2008

CEN

EN 13362:2005

Geosynthetic Barriers — Characteristics required for use in the construction of canals

 

1.2.2006

1.2.2007

CEN

EN 13383-1:2002

Armourstone — Part 1: Specification

 

1.3.2003

1.6.2004

 

EN 13383-1:2002/AC:2004

 

1.1.2010

1.1.2010

The threshold level for density set in Clause 5.2 (of EN 13383-1:2002) is excluded from the scope of the reference. (COM Decision 2016/1610/EC)

CEN

EN 13407:2006

Wall-hung urinals — Functional requirements and test methods

 

1.1.2008

1.1.2009

CEN

EN 13450:2002

Aggregates for railway ballast

 

1.10.2003

1.6.2004

 

EN 13450:2002/AC:2004

 

1.1.2007

1.1.2007

CEN

EN 13454-1:2004

Binders, composite binders and factory made mixtures for floor screeds based on calcium sulfate — Part 1: Definitions and requirements

 

1.7.2005

1.7.2006

CEN

EN 13479:2004

Welding consumables — General product standard for filler metals and fluxes for fusion welding of metallic materials

 

1.10.2005

1.10.2006

CEN

EN 13491:2004

Geosynthetic barriers — Characteristics required for use as a fluid barrier in the construction of tunnels and underground structures

 

1.9.2005

1.9.2006

 

EN 13491:2004/A1:2006

 

1.6.2007

1.6.2008

CEN

EN 13492:2004

Geosynthetic barriers — Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment

 

1.9.2005

1.9.2006

 

EN 13492:2004/A1:2006

 

1.6.2007

1.6.2008

CEN

EN 13493:2005

Geosynthetic barriers — Characteristics required for use in the construction of solid waste storage and disposal sites

 

1.3.2006

1.3.2007

CEN

EN 13502:2002

Chimneys — Requirements and test methods for clay/ceramic flue terminals

 

1.8.2003

1.8.2004

CEN

EN 13561:2004+A1:2008

External blinds — Performance requirements including safety

EN 13561:2004

1.8.2009

1.8.2010

CEN

EN 13564-1:2002

Anti-flooding devices for buildings — Part 1: Requirements

 

1.5.2003

1.5.2004

CEN

EN 13616:2004

Overfill prevention devices for static tanks for liquid petroleum fuels

 

1.5.2005

1.5.2006

 

EN 13616:2004/AC:2006

 

1.6.2006

1.6.2006

CEN

EN 13658-1:2005

Metal lath and beads — Definitions, requirements and test methods — Part 1: Internal plastering

 

1.3.2006

1.3.2007

CEN

EN 13658-2:2005

Metal lath and beads — Definitions, requirements and test methods — Part 2: External rendering

 

1.3.2006

1.3.2007

CEN

EN 13659:2004+A1:2008

Shutters — Performance requirements including safety

EN 13659:2004

1.8.2009

1.8.2010

CEN

EN 13693:2004+A1:2009

Precast concrete products — Special roof elements

EN 13693:2004

1.5.2010

1.5.2011

CEN

EN 13707:2004+A2:2009

Flexible sheets for waterproofing — Reinforced bitumen sheets for roof waterproofing — Definitions and characteristics

 

1.4.2010

1.10.2010

CEN

EN 13747:2005+A2:2010

Precast concrete products — Floor plates for floor systems

EN 13747:2005+A1:2008

1.1.2011

1.1.2011

CEN

EN 13748-1:2004

Terrazzo tiles — Part 1: Terrazzo tiles for internal use

 

1.6.2005

1.10.2006

 

EN 13748-1:2004/A1:2005

 

1.4.2006

1.10.2006

 

EN 13748-1:2004/AC:2005

 

1.6.2005

1.6.2005

CEN

EN 13748-2:2004

Terrazzo tiles — Part 2: Terrazzo tiles for external use

 

1.4.2005

1.4.2006

CEN

EN 13808:2013

Bitumen and bituminous binders — Framework for specifying cationic bituminous emulsions

EN 13808:2005

8.8.2014

8.8.2015

CEN

EN 13813:2002

Screed material and floor screeds — Screed material — Properties and requirements

 

1.8.2003

1.8.2004

CEN

EN 13815:2006

Fibrous gypsum plaster casts — Definitions, requirements and test methods

 

1.6.2007

1.6.2008

CEN

EN 13830:2003

Curtain walling — Product standard

 

1.12.2004

1.12.2005

CEN

EN 13859-1:2010

Flexible sheets for waterproofing — Definitions and characteristics of underlays — Part 1: Underlays for discontinuous roofing

 

1.4.2011

1.4.2012

CEN

EN 13859-2:2010

Flexible sheets for waterproofing — Definitions and characteristics of underlays — Part 2: Underlays for walls

 

1.4.2011

1.4.2012

CEN

EN 13877-3:2004

Concrete pavements — Part 3: Specifications for dowels to be used in concrete pavements

 

1.9.2005

1.9.2006

CEN

EN 13915:2007

Prefabricated gypsum plasterboard panels with a cellular paperboard core — Definitions, requirements and test methods

 

1.6.2008

1.6.2009

CEN

EN 13924:2006

Bitumen and bituminous binders — Specifications for hard paving grade bitumens

 

1.1.2010

1.1.2011

 

EN 13924:2006/AC:2006

 

1.1.2010

1.1.2010

CEN

EN 13950:2014

Gypsum board thermal/acoustic insulation composite panels — Definitions, requirements and test methods

EN 13950:2005

13.2.2015

13.2.2016

CEN

EN 13956:2012

Flexible sheets for waterproofing — Plastic and rubber sheets for roof waterproofing — Definitions and characteristics

EN 13956:2005

1.10.2013

1.10.2013

CEN

EN 13963:2005

Jointing materials for gypsum plasterboards — Definitions, requirements and test methods

 

1.3.2006

1.3.2007

 

EN 13963:2005/AC:2006

 

1.1.2007

1.1.2007

CEN

EN 13964:2014

Suspended ceilings — Requirements and test methods

EN 13964:2004

8.4.2016

8.4.2017

CEN

EN 13967:2012

Flexible sheets for waterproofing — Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet — Definitions and characteristics

EN 13967:2004

1.3.2013

1.7.2013

CEN

EN 13969:2004

Flexible sheets for waterproofing — Bitumen damp proof sheets including bitumen basement tanking sheets — Definitions and characteristics

 

1.9.2005

1.9.2006

 

EN 13969:2004/A1:2006

 

1.1.2008

1.1.2009

CEN

EN 13970:2004

Flexible sheets for waterproofing — Bitumen water vapour control layers — Definitions and characteristics

 

1.9.2005

1.9.2006

 

EN 13970:2004/A1:2006

 

1.1.2008

1.1.2009

CEN

EN 13978-1:2005

Precast concrete products — Precast concrete garages — Part 1: Requirements for reinforced garages monolithic or consisting of single sections with room dimensions

 

1.3.2006

1.3.2008

CEN

EN 13984:2013

Flexible sheets for waterproofing — Plastic and rubber vapour control layers — Definitions and characteristics

EN 13984:2004

1.11.2013

1.11.2013

CEN

EN 13986:2004+A1:2015

Wood-based panels for use in construction — Characteristics, evaluation of conformity and marking

EN 13986:2004

13.11.2015

13.11.2016

CEN

EN 14016-1:2004

Binders for magnesite screeds — Caustic magnesia and magnesium chloride — Part 1: Definitions, requirements

 

1.12.2004

1.12.2005

CEN

EN 14023:2010

Bitumen and bituminous binders — Specification framework for polymer modified bitumens

 

1.1.2011

1.1.2012

CEN

EN 14037-1:2016

Free hanging heating and cooling surfaces for water with a temperature below 120 oC — Part 1: Pre-fabricated ceiling mounted radiant panels for space heating — Technical specifications and requirements

EN 14037-1:2003

10.3.2017

10.3.2018

CEN

EN 14041:2004

Resilient, textile and laminate floor coverings — Essential characteristics

 

1.1.2006

1.1.2007

 

EN 14041:2004/AC:2006

 

1.1.2007

1.1.2007

CEN

EN 14055:2010

WC and urinal flushing cisterns

 

1.9.2011

1.9.2012

CEN

EN 14063-1:2004

Thermal insulation products for buildings — In-situ formed expanded clay lightweight aggregate products — Part 1: Specification for the loose-fill products before installation

 

1.6.2005

1.6.2006

 

EN 14063-1:2004/AC:2006

 

1.1.2008

1.1.2008

CEN

EN 14064-1:2010

Thermal insulation products for buildings — In-situ formed loose-fill mineral wool (MW) products — Part 1: Specification for the loose-fill products before installation

 

1.12.2010

1.12.2011

CEN

EN 14080:2013

Timber structures — Glued laminated timber and glued solid timber — Requirements

EN 14080:2005

8.8.2014

8.8.2015

CEN

EN 14081-1:2005+A1:2011

Timber structures — Strength graded structural timber with rectangular cross section — Part 1: General requirements

EN 14081-1:2005

1.10.2011

31.12.2011

CEN

EN 14178-2:2004

Glass in building — Basic alkaline earth silicate glass products — Part 2: Evaluation of conformity/Product standard

 

1.9.2005

1.9.2006

CEN

EN 14179-2:2005

Glass in building — Heat soaked thermally toughened soda lime silicate safety glass — Part 2: Evaluation of conformity/Product standard

 

1.3.2006

1.3.2007

CEN

EN 14188-1:2004

Joint fillers and sealants — Part 1: Specifications for hot applied sealants

 

1.7.2005

1.1.2007

CEN

EN 14188-2:2004

Joint fillers and sealants — Part 2: Specifications for cold applied sealants

 

1.10.2005

1.1.2007

CEN

EN 14188-3:2006

Joint fillers and sealants — Part 3: Specifications for preformed joint seals

 

1.11.2006

1.11.2007

CEN

EN 14190:2014

Gypsum board products from reprocessing — Definitions, requirements and test methods

EN 14190:2005

13.2.2015

13.2.2016

CEN

EN 14195:2005

Metal framing components for gypsum plasterboard systems — Definitions, requirements and test methods

 

1.1.2006

1.1.2007

 

EN 14195:2005/AC:2006

 

1.1.2007

1.1.2007

CEN

EN 14209:2005

Preformed plasterboard cornices — Definitions, requirements and test methods

 

1.9.2006

1.9.2007

CEN

EN 14216:2015

Cement — Composition, specifications and conformity criteria for very low heat special cements

EN 14216:2004

8.4.2016

8.4.2017

CEN

EN 14229:2010

Structural timber — Wood poles for overhead lines

 

1.9.2011

1.9.2012

CEN

EN 14246:2006

Gypsum elements for suspended ceilings — Definitions, requirements and test methods

 

1.4.2007

1.4.2008

 

EN 14246:2006/AC:2007

 

1.1.2008

1.1.2008

CEN

EN 14250:2010

Timber structures — Product requirements for prefabricated structural members assembled with punched metal plate fasteners

EN 14250:2004

1.11.2010

1.11.2010

CEN

EN 14296:2005

Sanitary appliances — Communal washing troughs

 

1.3.2006

1.3.2008

CEN

EN 14303:2009+A1:2013

Thermal insulation products for building equipment and industrial installations — Factory made mineral wool (MW) products — Specification

EN 14303:2009

1.11.2013

1.11.2013

CEN

EN 14304:2009+A1:2013

Thermal insulation products for building equipment and industrial installations — Factory made flexible elastomeric foam (FEF) products — Specification

EN 14304:2009

1.11.2013

1.11.2013

CEN

EN 14305:2009+A1:2013

Thermal insulation products for building equipment and industrial installations — Factory made cellular glass (CG) products — Specification

EN 14305:2009

1.11.2013

1.11.2013

CEN

EN 14306:2009+A1:2013

Thermal insulation products for building equipment and industrial installations — Factory made calcium silicate (CS) products — Specification

EN 14306:2009

1.11.2013

1.11.2013

CEN

EN 14307:2009+A1:2013

Thermal insulation products for building equipment and industrial installations — Factory made extruded polystyrene foam (XPS) products — Specification

EN 14307:2009

1.11.2013

1.11.2013

CEN

EN 14308:2009+A1:2013

Thermal insulation products for building equipment and industrial installations — Factory made rigid polyurethane foam (PUR) and polyisocyanurate foam (PIR) products — Specification

EN 14308:2009

1.11.2013

1.11.2013

CEN

EN 14309:2009+A1:2013

Thermal insulation products for building equipment and industrial installations — Factory made products of expanded polystyrene (EPS) — Specification

EN 14309:2009

1.11.2013

1.11.2013

CEN

EN 14313:2009+A1:2013

Thermal insulation products for building equipment and industrial installations — Factory made polyethylene foam (PEF) products — Specification

EN 14313:2009

1.11.2013

1.11.2013

CEN

EN 14314:2009+A1:2013

Thermal insulation products for building equipment and industrial installations — Factory made phenolic foam (PF) products — Specification

EN 14314:2009

1.11.2013

1.11.2013

CEN

EN 14315-1:2013

Thermal insulating products for buildings — In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products — Part 1: Specification for the rigid foam spray system before installation

 

1.11.2013

1.11.2014

CEN

EN 14316-1:2004

Thermal insulation products for buildings — In-situ thermal insulation formed from expanded perlite (EP) products — Part 1: Specification for bonded and loose-fill products before installation

 

1.6.2005

1.6.2006

CEN

EN 14317-1:2004

Thermal insulation products for buildings — In-situ thermal insulation formed from exfoliated vermiculite (EV) products — Part 1: Specification for bonded and loose-fill products before installation

 

1.6.2005

1.6.2006

CEN

EN 14318-1:2013

Thermal insulating products for buildings — In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products — Part 1: Specification for the rigid foam dispensed system before installation

 

1.11.2013

1.11.2014

CEN

EN 14319-1:2013

Thermal insulating products for building equipment and industrial installations — In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate foam (PIR) products — Part 1: Specification for the rigid foam dispensed system before installation

 

1.11.2013

1.11.2014

CEN

EN 14320-1:2013

Thermal insulating products for building equipment and industrial installations — In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate foam (PIR) products — Part 1: Specification for the rigid foam spray system before installation

 

1.11.2013

1.11.2014

CEN

EN 14321-2:2005

Glass in building — Thermally toughened alkaline earth silicate safety glass — Part 2: Evaluation of conformity/Product standard

 

1.6.2006

1.6.2007

CEN

EN 14339:2005

Underground fire hydrants

 

1.5.2006

1.5.2007

CEN

EN 14342:2013

Wood flooring and parquet — Characteristics, evaluation of conformity and marking

EN 14342:2005+A1:2008

8.8.2014

8.8.2015

Clause 4.4 of standard EN 14342:2013 is excluded from the scope of the reference published.

CEN

EN 14351-1:2006+A2:2016

Windows and doors — Product standard, performance characteristics — Part 1: Windows and external pedestrian doorsets

EN 14351-1:2006+A1:2010

1.11.2016

1.11.2019

The sentence regarding ‘ability to release’ in Clause 1, Scope (of EN 14351-1:2006+A2:2016) is excluded from the scope of the reference.

CEN

EN 14353:2007+A1:2010

Metal beads and feature profiles for use with gypsum plasterboards — Definitions, requirements and test methods

EN 14353:2007

1.11.2010

1.11.2010

CEN

EN 14374:2004

Timber structures — Structural laminated veneer lumber — Requirements

 

1.9.2005

1.9.2006

CEN

EN 14384:2005

Pillar fire hydrants

 

1.5.2006

1.5.2007

CEN

EN 14388:2005

Road traffic noise reducing devices — Specifications

 

1.5.2006

1.5.2007

 

EN 14388:2005/AC:2008

 

1.1.2009

1.1.2009

CEN

EN 14396:2004

Fixed ladders for manholes

 

1.12.2004

1.12.2005

CEN

EN 14399-1:2015

High-strength structural bolting assemblies for preloading — Part 1: General requirements

EN 14399-1:2005

8.4.2016

8.4.2017

CEN

EN 14411:2012

Ceramic tiles — Definitions, classification, characteristics, evaluation of conformity and marking

EN 14411:2006

1.7.2013

1.7.2014

CEN

EN 14428:2004+A1:2008

Shower enclosures — Functional requirements and test methods

EN 14428:2004

1.1.2009

1.1.2010

CEN

EN 14449:2005

Glass in building — Laminated glass and laminated safety glass — Evaluation of conformity/Product standard

 

1.3.2006

1.3.2007

 

EN 14449:2005/AC:2005

 

1.6.2006

1.6.2006

CEN

EN 14471:2013+A1:2015

Chimneys — System chimneys with plastic flue liners — Requirements and test methods

EN 14471:2013

10.7.2015

10.7.2016

CEN

EN 14496:2005

Gypsum based adhesives for thermal/acoustic insulation composite panels and plasterboards — Definitions, requirements and test methods

 

1.9.2006

1.9.2007

CEN

EN 14509:2013

Self-supporting double skin metal faced insulating panels — Factory made products — Specifications

EN 14509:2006

8.8.2014

8.8.2015

CEN

EN 14516:2006+A1:2010

Baths for domestic purposes

 

1.5.2011

1.5.2012

CEN

EN 14527:2006+A1:2010

Shower trays for domestic purposes

 

1.5.2011

1.5.2012

CEN

EN 14528:2007

Bidets — Functional requirements and test methods

EN 14528:2005

1.1.2008

1.1.2009

CEN

EN 14545:2008

Timber structures — Connectors — Requirements

 

1.8.2009

1.8.2010

CEN

EN 14566:2008+A1:2009

Mechanical fasteners for gypsum plasterboard systems — Definitions, requirements and test methods

EN 14566:2008

1.5.2010

1.11.2010

CEN

EN 14592:2008+A1:2012

Timber structures — Dowel-type fasteners — Requirements

EN 14592:2008

1.3.2013

1.7.2013

CEN

EN 14604:2005

Smoke alarm devices

 

1.5.2006

1.8.2008

 

EN 14604:2005/AC:2008

 

1.8.2009

1.8.2009

CEN

EN 14647:2005

Calcium aluminate cement — Composition, specifications and conformity criteria

 

1.8.2006

1.8.2007

 

EN 14647:2005/AC:2006

 

1.1.2008

1.1.2008

CEN

EN 14680:2006

Adhesives for non-pressure thermoplastic piping systems — Specifications

 

1.1.2008

1.1.2009

CEN

EN 14688:2006

Sanitary appliances — Wash basins — Functional requirements and test methods

 

1.1.2008

1.1.2009

CEN

EN 14695:2010

Flexible sheets for waterproofing — Reinforced bitumen sheets for waterproofing of concrete bridge decks and other trafficked areas of concrete — Definitions and characteristics

 

1.10.2010

1.10.2011

CEN

EN 14716:2004

Stretched ceilings — Requirements and test methods

 

1.10.2005

1.10.2006

CEN

EN 14782:2006

Self-supporting metal sheet for roofing, external cladding and internal lining — Product specification and requirements

 

1.11.2006

1.11.2007

CEN

EN 14783:2013

Fully supported metal sheet and strip for roofing, external cladding and internal lining — Product specification and requirements

EN 14783:2006

8.8.2014

8.8.2015

CEN

EN 14785:2006

Residential space heating appliances fired by wood pellets — Requirements and test methods

 

1.1.2010

1.1.2011

CEN

EN 14800:2007

Corrugated safety metal hose assemblies for the connection of domestic appliances using gaseous fuels

 

1.1.2008

1.1.2009

CEN

EN 14814:2007

Adhesives for thermoplastic piping systems for fluids under pressure — Specifications

 

1.1.2008

1.1.2009

CEN

EN 14843:2007

Precast concrete products — Stairs

 

1.1.2008

1.1.2009

CEN

EN 14844:2006+A2:2011

Precast concrete products — Box culverts

EN 14844:2006+A1:2008

1.9.2012

1.9.2013

CEN

EN 14846:2008

Building hardware — Locks and latches — Electromechanically operated locks and striking plates — Requirements and test methods

 

1.9.2011

1.9.2012

CEN

EN 14889-1:2006

Fibres for concrete — Part 1: Steel fibres — Definitions, specifications and conformity

 

1.6.2007

1.6.2008

CEN

EN 14889-2:2006

Fibres for concrete — Part 2: Polymer fibres — Definitions, specifications and conformity

 

1.6.2007

1.6.2008

CEN

EN 14891:2012

Liquid-applied water impermeable products for use beneath ceramic tiling bonded with adhesives — Requirements, test methods, evaluation of conformity, classification and designation

 

1.3.2013

1.3.2014

 

EN 14891:2012/AC:2012

 

1.3.2013

1.3.2013

CEN

EN 14904:2006

Surfaces for sports areas — Indoor surfaces for multi-sports use — Specification

 

1.2.2007

1.2.2008

Note 1 of Annex ZA.1 to standard EN 14904:2006 is excluded from the scope of the reference published.

CEN

EN 14909:2012

Flexible sheets for waterproofing — Plastic and rubber damp proof courses — Definitions and characteristics

EN 14909:2006

1.3.2013

1.7.2013

CEN

EN 14915:2013

Solid wood panelling and cladding — Characteristics, evaluation of conformity and marking

EN 14915:2006

8.8.2014

8.8.2015

CEN

EN 14933:2007

Thermal insulation and light weight fill products for civil engineering applications — Factory made products of expanded polystyrene (EPS) — Specification

 

1.7.2008

1.7.2009

CEN

EN 14934:2007

Thermal insulation and light weight fill products for civil engineering applications — Factory made products of extruded polystyrene foam (XPS) — Specification

 

1.7.2008

1.7.2009

CEN

EN 14963:2006

Roof coverings — Continuous rooflights of plastics with or without upstands — Classification, requirements and test methods

 

1.8.2009

1.8.2012

CEN

EN 14964:2006

Rigid underlays for discontinuous roofing — Definitions and characteristics

 

1.1.2008

1.1.2009

CEN

EN 14967:2006

Flexible sheets for waterproofing — Bitumen damp proof courses — Definitions and characteristics

 

1.3.2007

1.3.2008

CEN

EN 14989-1:2007

Chimneys — Requirements and test methods for metal chimneys and material independent air supply ducts for roomsealed heating applications — Part 1: Vertical air/flue terminals for C6-type appliances

 

1.1.2008

1.1.2009

CEN

EN 14989-2:2007

Chimneys — Requirements and test methods for metal chimneys and material independent air supply ducts for roomsealed heating applications — Part 2: Flue and air supply ducts for room sealed appliances

 

1.1.2009

1.1.2010

CEN

EN 14991:2007

Precast concrete products — Foundation elements

 

1.1.2008

1.1.2009

CEN

EN 14992:2007+A1:2012

Precast concrete products — Wall elements

EN 14992:2007

1.4.2013

1.7.2013

CEN

EN 15037-1:2008

Precast concrete products — Beam-and-block floor systems — Part 1: Beams

 

1.1.2010

1.1.2011

CEN

EN 15037-2:2009+A1:2011

Precast concrete products — Beam-and-block floor systems — Part 2: Concrete blocks

 

1.12.2011

1.12.2012

CEN

EN 15037-3:2009+A1:2011

Precast concrete products — Beam-and-block floor systems — Part 3: Clay blocks

 

1.12.2011

1.12.2012

CEN

EN 15037-4:2010+A1:2013

Precast concrete products — Beam-and-block floor systems — Part 4: Expanded polystyrene blocks

EN 15037-4:2010

8.8.2014

8.8.2015

CEN

EN 15037-5:2013

Precast concrete products — Beam-and-block floor systems — Part 5: Lightweight blocks for simple formwork

 

8.8.2014

8.8.2015

CEN

EN 15048-1:2007

Non-preloaded structural bolting assemblies — Part 1: General requirements

 

1.1.2008

1.10.2009

CEN

EN 15050:2007+A1:2012

Precast concrete products — Bridge elements

EN 15050:2007

1.12.2012

1.12.2012

CEN

EN 15069:2008

Safety gas connection valves for metal hose assemblies used for the connection of domestic appliances using gaseous fuel

 

1.1.2009

1.1.2010

CEN

EN 15088:2005

Aluminium and aluminium alloys — Structural products for construction works — Technical conditions for inspection and delivery

 

1.10.2006

1.10.2007

CEN

EN 15102:2007+A1:2011

Decorative wall coverings — Roll and panel form

EN 15102:2007

1.7.2012

1.7.2012

CEN

EN 15129:2009

Anti-seismic devices

 

1.8.2010

1.8.2011

CEN

EN 15167-1:2006

Ground granulated blast furnace slag for use in concrete, mortar and grout — Part 1: Definitions, specifications and conformity criteria

 

1.1.2008

1.1.2009

CEN

EN 15250:2007

Slow heat release appliances fired by solid fuel — Requirements and test methods

 

1.1.2008

1.1.2010

CEN

EN 15258:2008

Precast concrete products — Retaining wall elements

 

1.1.2010

1.1.2011

CEN

EN 15274:2015

General purpose adhesives for structural assembly — Requirements and test methods

EN 15274:2007

13.11.2015

13.11.2016

CEN

EN 15275:2015

Structural adhesives — Characterisation of anaerobic adhesives for co-axial metallic assembly in building and civil engineering structures

EN 15275:2007

13.11.2015

13.11.2016

CEN

EN 15283-1:2008+A1:2009

Gypsum boards with fibrous reinforcement — Definitions, requirements and test methods — Part 1: Gypsum boards with mat reinforcement

EN 15283-1:2008

1.6.2010

1.6.2011

CEN

EN 15283-2:2008+A1:2009

Gypsum boards with fibrous reinforcement — Definitions, requirements and test methods — Part 2: Gypsum fibre boards

EN 15283-2:2008

1.6.2010

1.6.2011

CEN

EN 15285:2008

Agglomerated stone — Modular tiles for flooring and stairs (internal and external)

 

1.1.2009

1.1.2010

 

EN 15285:2008/AC:2008

 

1.1.2009

1.1.2009

CEN

EN 15286:2013

Agglomerated stone — Slabs and tiles for wall finishes (internal and external)

 

8.8.2014

8.8.2015

CEN

EN 15322:2013

Bitumen and bituminous binders — Framework for specifying cut-back and fluxed bituminous binders

EN 15322:2009

8.8.2014

8.8.2015

CEN

EN 15368:2008+A1:2010

Hydraulic binder for non-structural applications — Definition, specifications and conformity criteria

 

1.9.2011

1.9.2012

CEN

EN 15381:2008

Geotextiles and geotextile-related products — Characteristics required for use in pavements and asphalt overlays

 

1.1.2010

1.1.2011

CEN

EN 15382:2013

Geosynthetic barriers — Characteristics required for use in transportation infrastructure

EN 15382:2008

8.8.2014

8.8.2015

CEN

EN 15435:2008

Precast concrete products — Normal weight and lightweight concrete shuttering blocks — Product properties and performance

 

1.2.2009

1.2.2010

CEN

EN 15497:2014

Structural finger jointed solid timber — Performance requirements and minimum production requirements

 

10.10.2014

10.10.2015

CEN

EN 15498:2008

Precast concrete products — Wood-chip concrete shuttering blocks — Product properties and performance

 

1.2.2009

1.2.2010

CEN

EN 15501:2013

Thermal insulation products for building equipment and industrial installations — Factory made expanded perlite (EP) and exfoliated vermiculite (EV) products — Specification

 

8.8.2014

8.8.2015

CEN

EN 15599-1:2010

Thermal insulation products for building equipment and industrial installations — In-situ thermal insulation formed from expanded perlite (EP) products — Part 1: Specification for bonded and loose-fill products before installation

 

1.4.2011

1.4.2012

CEN

EN 15600-1:2010

Thermal insulation products for building equipment and industrial installations — In-situ thermal insulation formed from exfoliated vermiculite (EV) products — Part 1: Specification for bonded and loose-fill products before installation

 

1.4.2011

1.4.2012

CEN

EN 15650:2010

Ventilation for buildings — Fire dampers

 

1.9.2011

1.9.2012

CEN

EN 15651-1:2012

Sealants for non-structural use in joints in buildings and pedestrian walkways — Part 1: Sealants for facade elements

 

1.7.2013

1.7.2014

CEN

EN 15651-2:2012

Sealants for non-structural use in joints in buildings and pedestrian walkways — Part 2: Sealants for glazing

 

1.7.2013

1.7.2014

CEN

EN 15651-3:2012

Sealants for non-structural use in joints in buildings and pedestrian walkways — Part 3: Sealants for sanitary joints

 

1.7.2013

1.7.2014

CEN

EN 15651-4:2012

Sealants for non-structural use in joints in buildings and pedestrian walkways — Part 4: Sealants for pedestrian walkways

 

1.7.2013

1.7.2014

CEN

EN 15681-2:2017

Glass in Building — Basic alumino silicate glass products — Part 2: Product standard

 

11.8.2017

11.8.2018

The third sentence of Clause 4.2.2.10 is excluded from the scope of the reference published.

CEN

EN 15682-2:2013

Glass in building — Heat soaked thermally toughened alkaline earth silicate safety glass — Part 2: Evaluation of conformity/Product standard

 

8.8.2014

8.8.2015

CEN

EN 15683-2:2013

Glass in building — Thermally toughened soda lime silicate channel shaped safety glass — Part 2: Evaluation of conformity/Product standard

 

8.8.2014

8.8.2015

CEN

EN 15732:2012

Light weight fill and thermal insulation products for civil engineering applications (CEA) — Expanded clay lightweight aggregate products (LWA)

 

1.8.2013

1.8.2014

CEN

EN 15743:2010+A1:2015

Supersulfated cement — Composition, specifications and conformity criteria

EN 15743:2010

13.11.2015

13.11.2016

CEN

EN 15814:2011+A2:2014

Polymer modified bituminous thick coatings for waterproofing — Definitions and requirements

EN 15814:2011+A1:2012

10.7.2015

10.7.2016

CEN

EN 15821:2010

Multi-firing sauna stoves fired by natural wood logs — Requirements and test methods

 

1.7.2011

1.7.2012

CEN

EN 15824:2009

Specifications for external renders and internal plasters based on organic binders

 

1.4.2010

1.4.2011

CEN

EN 16034:2014

Pedestrian doorsets, industrial, commercial, garage doors and openable windows — Product standard, performance characteristics — Fire resisting and/or smoke control characteristics

 

1.11.2016

1.11.2019

NOTE: EN 16034:2014 shall only be applied together with either EN 13241:2003+A2:2016 or EN 14351-1:2006+A2:2016.

CEN

EN 16069:2012+A1:2015

Thermal insulation products for buildings — Factory made products of polyethylene foam (PEF) — Specification

EN 16069:2012

10.7.2015

10.7.2016

CEN

EN 16153:2013+A1:2015

Light transmitting flat multiwall polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings — Requirements and test methods

EN 16153:2013

10.7.2015

10.7.2016

CEN

EN 16240:2013

Light transmitting flat solid polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings — Requirements and test methods

 

10.3.2017

10.3.2018

Cenelec

EN 50575:2014

Power, control and communication cables — Cables for general applications in construction works subject to reaction to fire requirements

 

10.6.2016

1.7.2017

 

EN 50575:2014/A1:2016

 

10.6.2016

1.7.2017

NOTE:

Any information concerning the availability of the standards can be obtained either from the European standardisation organisations or from the national standardisation bodies the list of which is published in the Official Journal of the European Union according to Article 27 of the Regulation (EU) No 1025/2012 (2).

Standards are adopted by the European standardisation organisations in English (CEN and Cenelec also publish in French and German). Subsequently, the titles of the standards are translated into all other required official languages of the European Union by the national standardisation bodies. The European Commission is not responsible for the correctness of the titles which have been presented for publication in the Official Journal.

References to Corrigenda ‘…/AC:YYYY’ are published for information only. A Corrigendum removes printing, linguistic or similar errors from the text of a standard and may relate to one or more language versions (English, French and/or German) of a standard as adopted by a European standardisation organisation.

Publication of the references in the Official Journal of the European Union does not imply that the standards are available in all the official languages of the European Union.

This list replaces all the previous lists published in the Official Journal of the European Union. The European Commission ensures the updating of this list.

More information about harmonised standards and other European standards on the Internet at:

http://ec.europa.eu/growth/single-market/european-standards/harmonised-standards/index_en.htm


(1)  ESO: European standardisation organisation:

CEN: Avenue Marnix/Marnixlaan 17, 1000 Bruxelles/Brussel, BELGIQUE/BELGIË; tel. +32 25500811; fax +32 25500819 (http://www.cen.eu)

Cenelec: Avenue Marnix/Marnixlaan 17, 1000 Bruxelles/Brussel, BELGIQUE/BELGIË; tel. +32 25196871; fax +32 25196919 (http://www.cenelec.eu)

ETSI: 650 route des Lucioles, 06921 Sophia Antipolis, FRANCE; tel. +33 492944200; fax +33 493654716 (http://www.etsi.eu)

(2)  OJ C 338, 27.9.2014, p. 31.


15.12.2017   

EN

Official Journal of the European Union

C 435/93


Commission communication in the framework of the implementation of the Directive 2008/57/EC of the European Parliament and of the Council on the interoperability of the rail system within the Community

(Publication of titles and references of harmonised standards under Union harmonisation legislation)

(Text with EEA relevance)

(2017/C 435/04)

ESO (1)

Reference and title of the standard

(and reference document)

Reference of superseded standard

Date of cessation of presumption of conformity of superseded standard

Note 1

(1)

(2)

(3)

(4)

CEN

EN ISO 3381:2011

Railway applications — Acoustics — Measurement of noise inside railbound vehicles (ISO 3381:2005)

 

 

CEN

EN 12080:2007+A1:2010

Railway applications — Axleboxes — Rolling bearings

 

 

CEN

EN 12081:2007+A1:2010

Railway applications — Axleboxes — Lubricating greases

 

 

CEN

EN 12082:2007+A1:2010

Railway applications — Axleboxes — Performance testing

 

 

CEN

EN 12663-1:2010+A1:2014

Railway applications — Structural requirements of railway vehicle bodies — Part 1: Locomotives and passenger rolling stock (and alternative method for freight wagons)

EN 12663-1:2010

Note 2.1

8.7.2016

CEN

EN 12663-2:2010

Railway applications — Structural requirements of railway vehicle bodies — Part 2: Freight wagons

 

 

CEN

EN 12665:2011

Light and lighting — Basic terms and criteria for specifying lighting requirements

 

 

CEN

EN 13103:2009+A2:2012

Railway applications — Wheelsets and bogies — Non-powered axles — Design method

EN 13103:2009+A1:2010

Note 2.1

31.1.2013

CEN

EN 13104:2009+A2:2012

Railway applications — Wheelsets and bogies — Powered axles — Design method

EN 13104:2009+A1:2010

Note 2.1

30.4.2013

CEN

EN 13129:2016

Railway applications — Air conditioning for main line rolling stock — Comfort parameters and type tests

 

 

CEN

EN 13145:2001+A1:2011

Railway applications — Track — Wood sleepers and bearers

 

 

CEN

EN 13230-1:2016

Railway applications — Track — Concrete sleepers and bearers — Part 1: General requirements

EN 13230-1:2009

Note 2.1

The date of this publication

CEN

EN 13230-2:2016

Railway applications — Track — Concrete sleepers and bearers — Part 2: Prestressed monoblock sleepers

EN 13230-2:2009

Note 2.1

The date of this publication

CEN

EN 13230-3:2016

Railway applications — Track — Concrete sleepers and bearers — Part 3: Twin-block reinforced sleepers

EN 13230-3:2009

Note 2.1

The date of this publication

CEN

EN 13230-4:2009

Railway applications — Track — Concrete sleepers and bearers — Part 4: Prestressed bearers for switches and crossings

 

 

CEN

EN 13232-2:2003+A1:2011

Railway applications — Track — Switches and crossings — Part 2: Requirements for geometric design

 

 

CEN

EN 13232-3:2003+A1:2011

Railway applications — Track — Switches and crossings — Part 3: Requirements for wheel/rail interaction

 

 

CEN

EN 13232-4:2005+A1:2011

Railway applications — Track — Switches and crossings — Part 4: Actuation, locking and detection

 

 

CEN

EN 13232-5:2005+A1:2011

Railway applications — Track — Switches and crossings — Part 5: Switches

 

 

CEN

EN 13232-6:2005+A1:2011

Railway applications — Track — Switches and crossings — Part 6: Fixed common and obtuse crossings

 

 

CEN

EN 13232-7:2006+A1:2011

Railway applications — Track — Switches and crossings — Part 7: Crossings with moveable parts

 

 

CEN

EN 13232-8:2007+A1:2011

Railway applications — Track — Switches and crossings — Part 8: Expansion devices

 

 

CEN

EN 13232-9:2006+A1:2011

Railway applications — Track — Switches and crossings — Part 9: Layouts

 

 

CEN

EN 13260:2009+A1:2010

Railway applications — Wheelsets and bogies — Wheelsets — Product requirements

 

 

CEN

EN 13261:2009+A1:2010

Railway applications — Wheelsets and bogies — Axles — Product requirements

 

 

CEN

EN 13262:2004+A2:2011

Railway applications — Wheelsets and bogies — Wheels — Product requirements

 

 

CEN

EN 13272:2012

Railway applications — Electrical lighting for rolling stock in public transport systems

 

 

CEN

EN 13481-2:2012+A1:2017

Railway applications — Track — Performance requirements for fastening systems — Part 2: Fastening systems for concrete sleepers

EN 13481-2:2012

Note 2.1

The date of this publication

CEN

EN 13481-3:2012

Railway applications — Track — Performance requirements for fastening systems — Part 3: Fastening systems for wood sleepers

 

 

CEN

EN 13481-5:2012+A1:2017

Railway applications — Track — Performance requirements for fastening systems — Part 5: Fastening systems for slab track with rail on the surface or rail embedded in a channel

EN 13481-5:2012

Note 2.1

The date of this publication

CEN

EN 13481-7:2012

Railway applications — Track — Performance requirements for fastening systems — Part 7: Special fastening systems for switches and crossings and check rails

 

 

CEN

EN 13674-1:2011+A1:2017

Railway applications — Track — Rail — Part 1: Vignole railway rails 46 kg/m and above

EN 13674-1:2011

Note 2.1

The date of this publication

CEN

EN 13674-2:2006+A1:2010

Railway applications — Track — Rail — Part 2: Switch and crossing rails used in conjunction with Vignole railway rails 46 kg/m and above

 

 

CEN

EN 13674-3:2006+A1:2010

Railway applications — Track — Rail — Part 3: Check rails

 

 

CEN

EN 13715:2006+A1:2010

Railway applications — Wheelsets and bogies — Wheels — Tread profile

 

 

CEN

EN 13749:2011

Railway applications — Wheelsets and bogies — Method of specifying the structural requirements of bogie frames

 

 

CEN

EN 13803-1:2010

Railway applications — Track — Track alignment design parameters — Track gauges 1 435  mm and wider — Part 1: Plain line

 

 

CEN

EN 13803-2:2006+A1:2009

Railway applications — Track — Track alignment design parameters — Track gauges 1 435  mm and wider — Part 2: Switches and crossings and comparable alignment design situations with abrupt changes of curvature

 

 

CEN

EN 13848-5:2008+A1:2010

Railway applications — Track — Track geometry quality — Part 5: Geometric quality levels — Plain line

 

 

CEN

EN 13979-1:2003+A2:2011

Railway applications — Wheelsets and bogies — Monobloc wheels — Technical approval procedure — Part 1: Forged and rolled wheels

EN 13979-1:2003+A1:2009

Note 2.1

30.9.2011

CEN

EN 14033-1:2017

Railway applications — Track — Railbound construction and maintenance machines — Part 1: Technical requirements for running

EN 14033-1:2011

Note 2.1

The date of this publication

CEN

EN 14067-4:2005+A1:2009

Railway applications — Aerodynamics — Part 4: Requirements and test procedures for aerodynamics on open track

 

 

CEN

EN 14067-5:2006+A1:2010

Railway applications — Aerodynamics — Part 5: Requirements and test procedures for aerodynamics in tunnels

 

 

CEN

EN 14067-6:2010

Railway applications — Aerodynamics — Part 6: Requirements and test procedures for cross wind assessment

 

 

CEN

EN 14198:2016

Railway applications — Braking — Requirements for the brake system of trains hauled by locomotives

 

 

CEN

EN 14531-1:2015

Railway applications — Methods for calculation of stopping and slowing distances and immobilization braking — Part 1: General algorithms utilizing mean value calculation for train sets or single vehicles

EN 14531-6:2009

Note 2.1

8.7.2016

CEN

EN 14531-2:2015

Railway applications — Methods for calculation of stopping and slowing distances and immobilization braking — Part 2: Step by step calculations for train sets or single vehicles

EN 14531-6:2009

Note 2.1

8.7.2016

CEN

EN 14535-1:2005+A1:2011

Railway applications — Brake discs for railway rolling stock — Part 1: Brake discs pressed or shrunk onto the axle or drive shaft, dimensions and quality requirements

 

 

CEN

EN 14535-2:2011

Railway applications — Brake discs for railway rolling stock — Part 2: Brake discs mounted onto the wheel, dimensions and quality requirements

 

 

CEN

EN 14535-3:2015

Railway applications — Brake discs for railway rolling stock — Part 3: Brake discs, performance of the disc and the friction couple, classification

 

 

CEN

EN 14587-2:2009

Railway applications — Track — Flash butt welding of rails — Part 2: New R220, R260, R260Mn and R350HT grade rails by mobile welding machines at sites other than a fixed plant

 

 

CEN

EN 14601:2005+A1:2010

Railway applications — Straight and angled end cocks for brake pipe and main reservoir pipe

 

 

CEN

EN 14752:2015

Railway applications — Body side entrance systems for rolling stock

 

 

CEN

EN 14813-1:2006+A1:2010

Railway applications — Air conditioning for driving cabs — Part 1: Comfort parameters

 

 

CEN

EN 14813-2:2006+A1:2010

Railway applications — Air conditioning for driving cabs — Part 2: Type tests

 

 

CEN

EN 14865-1:2009+A1:2010

Railway applications — Axlebox lubricating greases — Part 1: Method to test the ability to lubricate

 

 

CEN

EN 14865-2:2006+A2:2010

Railway applications — Axlebox lubricating greases — Part 2: Method to test the mechanical stability to cover vehicle speeds up to 200 km/h

 

 

CEN

EN 15020:2006+A1:2010

Railway applications — Rescue coupler — Performance requirements, specific interface geometry and test methods

 

 

CEN

EN 15153-1:2013+A1:2016

Railway applications — External visible and audible warning devices for trains — Part 1: Head, marker and tail lamps

EN 15153-1:2013

Note 2.1

The date of this publication

CEN

EN 15153-2:2013

Railway applications — External visible and audible warning devices for trains — Part 2: Warning horns

 

 

CEN

EN 15220:2016

Railway applications — Brake indicators

EN 15220-1:2008+A1:2011

Note 2.1

The date of this publication

CEN

EN 15227:2008+A1:2010

Railway applications — Crashworthiness requirements for railway vehicle bodies

 

 

CEN

EN 15273-2:2013+A1:2016

Railway applications — Gauges — Part 2: Rolling stock gauge

EN 15273-2:2013

Note 2.1

The date of this publication

CEN

EN 15273-3:2013+A1:2016

Railway applications — Gauges — Part 3: Structure gauges

EN 15273-3:2013

Note 2.1

The date of this publication

CEN

EN 15302:2008+A1:2010

Railway applications — Method for determining the equivalent conicity

 

 

CEN

EN 15313:2016

Railway applications — In-service wheelset operation requirements — In-service and off-vehicle wheelset maintenance

EN 15313:2010

Note 2.1

The date of this publication

CEN

EN 15355:2008+A1:2010

Railway applications — Braking — Distributor valves and distributor-isolating devices

 

 

CEN

EN 15427:2008+A1:2010

Railway applications — Wheel/rail friction management — Flange lubrication

 

 

CEN

EN 15437-1:2009

Railway applications — Axlebox condition monitoring — Interface and design requirements — Part 1: Track side equipment and rolling stock axlebox

 

 

CEN

EN 15437-2:2012

Railway applications — Axlebox condition monitoring — Interface and design requirements — Part 2: Performance and design requirements of on-board systems for temperature monitoring

 

 

CEN

EN 15461:2008+A1:2010

Railway applications — Noise emission — Characterisation of the dynamic properties of track sections for pass by noise measurements

 

 

CEN

EN 15528:2015

Railway applications — Line categories for managing the interface between load limits of vehicles and infrastructure

EN 15528:2008+A1:2012

Note 2.1

8.7.2016

CEN

EN 15551:2017

Railway applications — Railway rolling stock — Buffers

EN 15551:2009+A1:2010

Note 2.1

The date of this publication

CEN

EN 15566:2016

Railway applications — Railway rolling stock — Draw gear and screw coupling

EN 15566:2009+A1:2010

Note 2.1

The date of this publication

CEN

EN 15594:2009

Railway applications — Track — Restoration of rails by electric arc welding

 

 

CEN

EN 15595:2009+A1:2011

Railway applications — Braking — Wheel slide protection

 

 

CEN

EN 15610:2009

Railway applications — Noise emission — Rail roughness measurement related to rolling noise generation

 

 

CEN

EN 15611:2008+A1:2010

Railway applications — Braking — Relay valves

EN 15611:2008

Note 2.1

30.4.2011

CEN

EN 15612:2008+A1:2010

Railway applications — Braking — Brake pipe accelerator valve

EN 15612:2008

Note 2.1

30.4.2011

CEN

EN 15624:2008+A1:2010

Railway applications — Braking — Empty-loaded changeover devices

EN 15624:2008

Note 2.1

30.4.2011

CEN

EN 15625:2008+A1:2010

Railway applications — Braking — Automatic variable load sensing devices

EN 15625:2008

Note 2.1

30.4.2011

CEN

EN 15663:2009

Railway applications — Definition of vehicle reference masses

 

 

 

EN 15663:2009/AC:2010

 

 

CEN

EN 15686:2010

Railway applications — Testing for the acceptance of running characteristics of railway vehicles with cant deficiency compensation system and/or vehicles intended to operate with higher cant deficiency than stated in EN 14363:2005, Annex G

 

 

CEN

EN 15687:2010

Railway applications — Testing for the acceptance of running characteristics of freight vehicles with static axle loads higher than 225 kN and up to 250 kN

 

 

CEN

EN 15723:2010

Railway applications — Closing and locking devices for payload protecting devices against environmental influences — Requirements for durability, operation, indication, maintenance, recycling

 

 

CEN

EN 15734-1:2010

Railway applications — Braking systems of high speed trains — Part 1: Requirements and definitions

 

 

CEN

EN 15734-2:2010

Railway applications — Braking systems of high speed trains — Part 2: Test methods

 

 

 

EN 15734-2:2010/AC:2012

 

 

CEN

EN 15746-1:2010+A1:2011

Railway applications — Track — Road-rail machines and associated equipment — Part 1: Technical requirements for running and working

EN 15746-1:2010

Note 2.1

30.4.2011

CEN

EN 15746-2:2010+A1:2011

Railway applications — Track — Road-rail machines and associated equipment — Part 2: General safety requirements

EN 15746-2:2010

Note 2.1

30.4.2012

CEN

EN 15806:2010

Railway applications — Braking — Static brake testing

 

 

CEN

EN 15807:2011

Railway applications — Pneumatic half couplings

 

 

CEN

EN 15827:2011

Railway applications — Requirements for bogies and running gears

 

 

CEN

EN 15839:2012

Railway applications — Testing for the acceptance of running characteristics of railway vehicles — Freight wagons — Testing of running safety under longitudinal compressive forces

 

 

Date of removal of the reference of this obsolete harmonised standard from the OJ: 31.1.2018. The removal is due to the fact that the standard in question has been withdrawn by the relevant ESO and is no longer an adopted European standard within the meaning of Article 2(1) point (c) of Regulation (EU) No 1025/2012 (OJ L 316, 14.11.2012).

CEN

EN 15877-1:2012

Railway applications — Marking on railway vehicles — Part 1: Freight wagons

 

 

CEN

EN 15877-2:2013

Railway applications — Markings of railway vehicles — Part 2: External markings on coaches, motive power units, locomotives and on track machines

 

 

CEN

EN 15892:2011

Railway applications — Noise Emission — Measurement of noise inside driver’s cabs

 

 

CEN

EN 16019:2014

Railway applications — Automatic coupler — Performance requirements, specific interface geometry and test method

 

 

CEN

EN 16116-1:2013

Railway applications — Design requirements for steps, handrails and associated access for staff — Part 1: Passenger vehicles, luggage vans and locomotives

 

 

CEN

EN 16116-2:2013

Railway applications — Design requirements for steps, handrails and associated access for staff — Part 2: Freight wagons

 

 

CEN

EN 16185-1:2014

Railway applications — Braking systems of multiple unit trains — Part 1: Requirements and definitions

 

 

CEN

EN 16185-2:2014

Railway applications — Braking systems of multiple unit trains — Part 2: Test methods

 

 

CEN

EN 16186-3:2016

Railway applications — Driver’s cab — Part 3: Design of displays

 

The date of this publication

CEN

EN 16207:2014

Railway applications — Braking — Functional and performance criteria of Magnetic Track Brake systems for use in railway rolling stock

 

 

CEN

EN 16235:2013

Railway application — Testing for the acceptance of running characteristics of railway vehicles — Freight wagons — Conditions for dispensation of freight wagons with defined characteristics from on-track tests according to EN 14363

 

 

CEN

EN 16241:2014+A1:2016

Railway applications — Slack adjuster

EN 16241:2014

Note 2.1

The date of this publication

CEN

EN 16286-1:2013

Railway applications — Gangway systems between vehicles — Part 1: Main applications

 

 

CEN

EN 16334:2014

Railway applications — Passenger Alarm System — System requirements

 

 

CEN

EN 16404:2016

Railway applications — Re-railing and recovery requirements for railway vehicles

EN 16404:2014

Note 2.1

The date of this publication

CEN

EN 16494:2015

Railway applications — Requirements for ERTMS Trackside Boards

 

 

CEN

EN 16584-1:2017

Railway applications — Design for PRM use — General requirements — Part 1: Contrast

 

 

CEN

EN 16584-2:2017

Railway applications — Design for PRM use — General requirements — Part 2: Information

 

 

CEN

EN 16584-3:2017

Railway applications — Design for PRM use — General requirements — Part 3: Optical and friction characteristics

 

 

CEN

EN 16585-1:2017

Railway applications — Design for PRM use — Equipment and components onboard rolling stock — Part 1: Toilets

 

 

CEN

EN 16585-2:2017

Railway applications — Design for PRM use — Equipment and components on board rolling stock — Part 2: Elements for sitting, standing and moving

 

 

CEN

EN 16585-3:2017

Railway applications — Design for PRM use — Equipment and components on board rolling stock — Part 3: Clearways and internal doors

 

 

CEN

EN 16586-1:2017

Railway applications — Design for PRM use — Accessibility of persons with reduced mobility to rolling stock — Part 1: Steps for access and egress

 

 

CEN

EN 16586-2:2017

Railway applications — Design for PRM use — Accessibility of persons with reduced mobility to rolling stock — Part 2: Boarding aids

 

 

CEN

EN 16587:2017

Railway applications — Design for PRM Use — Requirements on obstacle free routes for infrastructure

 

 

CEN

EN 16683:2015

Railway applications — Call for aid and communication device — Requirements

 

 

CEN

EN 16729-1:2016

Railway applications — Infrastructure — Non-destructive testing on rails in track — Part 1: Requirements for ultrasonic inspection and evaluation principles

 

 

CEN

EN 45545-1:2013

Railway applications — Fire protection on railway vehicles — Part 1: General

 

 

CEN

EN 45545-2:2013+A1:2015

Railway applications — Fire protection on railway vehicles — Part 2: Requirements for fire behaviour of materials and components

EN 45545-2:2013

Note 2.1

8.7.2016

CEN

EN 45545-3:2013

Railway applications — Fire protection on railway vehicles — Part 3: Fire resistance requirements for fire barriers

 

 

CEN

EN 45545-4:2013

Railway applications — Fire protection on railway vehicles — Part 4: Fire safety requirements for rolling stock design

 

 

CEN

EN 45545-5:2013+A1:2015

Railway applications — Fire protection on railway vehicles — Part 5: Fire safety requirements for electrical equipment including that of trolley buses, track guided buses and magnetic levitation vehicles

EN 45545-5:2013

Note 2.1

8.7.2016

CEN

EN 45545-6:2013

Railway applications — Fire protection on railway vehicles — Part 6: Fire control and management systems

 

 

CEN

EN 45545-7:2013

Railway applications — Fire protection on railway vehicles — Part 7: Fire safety requirements for flammable liquid and flammable gas installations

 

 

Cenelec

EN 50122-1:2011

Railway applications — Fixed installations — Electrical safety, earthing and the return circuit — Part 1: Protective provisions against electric shock

 

 

 

EN 50122-1:2011/AC:2012

 

 

Cenelec

EN 50122-2:2010

Railway applications — Fixed installations — Electrical safety, earthing and the return circuit — Part 2: Provisions against the effects of stray currents caused by d.c. traction systems

 

 

Cenelec

EN 50122-3:2010

Railway applications — Fixed installations — Electrical safety, earthing and the return circuit — Part 3: Mutual Interaction of a.c. and d.c. traction systems

 

 

Cenelec

EN 50124-1:2001

Railway applications — Insulation coordination — Part 1: Basic requirements — Clearances and creepage distances for all electrical and electronic equipment

 

 

 

EN 50124-1:2001/A1:2003

Note 3

1.10.2006

 

EN 50124-1:2001/A2:2005

Note 3

1.5.2008

 

EN 50124-1:2001/AC:2010

 

 

 

EN 50124-1:2001/AC:2007

 

 

Cenelec

EN 50124-1:2017

Railway applications — Insulation coordination — Part 1: Basic requirements — Clearances and creepage distances for all electrical and electronic equipment

EN 50124-1:2001

+ A1:2003

+ A2:2005

Note 2.1

6.2.2020

Cenelec

EN 50124-2:2001

Railway applications — Insulation coordination — Part 2: Overvoltages and related protection

 

 

 

EN 50124-2:2001/AC:2010

 

 

Cenelec

EN 50124-2:2017

Railway applications — Insulation coordination — Part 2: Overvoltages and related protection

EN 50124-2:2001

Note 2.1

6.2.2020

Cenelec

EN 50125-2:2002

Railway applications — Environmental conditions for equipment — Part 2: Fixed electrical installations

 

 

 

EN 50125-2:2002/AC:2010

 

 

Cenelec

EN 50125-3:2003

Railway applications — Environmental conditions for equipment — Part 3: Equipment for signalling and telecommunications

 

 

 

EN 50125-3:2003/AC:2010

 

 

Cenelec

EN 50126-1:1999

Railway applications — The specification and demonstration of Reliability, Availability, Maintainability and Safety (RAMS) — Part 1: Basic requirements and generic process

 

 

 

EN 50126-1:1999/AC:2012

 

 

 

EN 50126-1:1999/AC:2010

 

 

 

EN 50126-1:1999/AC:2006

 

 

Cenelec

EN 50129:2003

Railway applications — Communication, signalling and processing systems — Safety related electronic systems for signalling

 

 

 

EN 50129:2003/AC:2010

 

 

Cenelec

EN 50151:2003

Railway applications — Fixed installations — Electric traction — Special requirements for composite insulators

 

 

 

EN 50151:2003/AC:2010

 

 

Cenelec

EN 50155:2007

Railway applications — Electronic equipment used on rolling stock

EN 50155:2001

Note 2.1

 

 

EN 50155:2007/AC:2012

 

 

 

EN 50155:2007/AC:2010

 

 

Cenelec

EN 50159:2010

Railway applications — Communication, signalling and processing systems — Safety-related communication in transmission systems

EN 50159-1:2001

EN 50159-2:2001

Note 2.1

1.9.2013

Cenelec

EN 50163:2004

Railway applications — Supply voltages of traction systems

 

 

 

EN 50163:2004/A1:2007

Note 3

1.3.2010

 

EN 50163:2004/AC:2013

 

 

 

EN 50163:2004/AC:2010

 

 

Cenelec

EN 50238-1:2003

Railway applications — Compatibility between rolling stock and train detection systems — Part 1: General

 

 

 

EN 50238-1:2003/AC:2014

 

 

Cenelec

EN 50317:2012

Railway applications — Current collection systems — Requirements for and validation of measurements of the dynamic interaction between pantograph and overhead contact line

EN 50317:2002

+ A1:2004

+ A2:2007

Note 2.1

26.12.2014

 

EN 50317:2012/AC:2012

 

 

Cenelec

EN 50367:2012

Railway applications — Current collection systems — Technical criteria for the interaction between pantograph and overhead line (to achieve free access)

 

 

 

EN 50367:2012/AC:2013

 

 

 

EN 50367:2012/A1:2016

Note 3

25.7.2019

Cenelec

EN 50388:2012

Railway Applications — Power supply and rolling stock — Technical criteria for the coordination between power supply (substation) and rolling stock to achieve interoperability

EN 50388:2005

Note 2.1

13.2.2015

 

EN 50388:2012/AC:2013

 

 

Cenelec

EN 50405:2015

Railway applications — Current collection systems — Pantographs, testing methods for contact strips

 

 

 

EN 50405:2015/A1:2016

Note 3

The date of this publication

Cenelec

EN 50463-1:2012

Railway applications — Energy measurement on board trains — Part 1: General

 

 

Cenelec

EN 50463-2:2012

Railway applications — Energy measurement on board trains — Part 2: Energy measuring

 

 

Cenelec

EN 50463-3:2012

Railway applications — Energy measurement on board trains — Part 3: Data handling

 

 

Cenelec

EN 50463-4:2012

Railway applications — Energy measurement on board trains — Part 4: Communication

 

 

Cenelec

EN 50463-5:2012

Railway applications — Energy measurement on board trains — Part 5: Conformity assessment

 

 

Cenelec

EN 50533:2011

Railway applications — Three-phase train line voltage characteristics

 

 

 

EN 50533:2011/A1:2016

Note 3

The date of this publication

Cenelec

EN 50553:2012

Railway applications — Requirements for running capability in case of fire on board of rolling stock

 

 

 

EN 50553:2012/AC:2013

 

 

 

EN 50553:2012/A1:2016

Note 3

15.2.2019

Cenelec

EN 50592:2016

Railway applications — Testing of rolling stock for electromagnetic compatibility with axle counters

 

 

Cenelec

EN 50617-1:2015

Railway applications — Technical parameters of train detection systems for the interoperability of the trans-European railway system — Part 1: Track circuits

 

 

Cenelec

EN 50617-2:2015

Railway Applications — Technical parameters of train detection systems for the interoperability of the trans-European railway system — Part 2: Axle counters

 

 

 

EN 50617-2:2015/AC:2016

 

 

Cenelec

EN 61375-1:2012

Electronic railway equipment — Train communication network (TCN) — Part 1: General architecture

IEC 61375-1:2012

 

 

Cenelec

EN 61375-2-1:2012

Electronic railway equipment — Train communication network (TCN) — Part 2-1: Wire Train Bus (WTB)

IEC 61375-2-1:2012

 

 

Cenelec

EN 61375-2-2:2012

Electronic railway equipment — Train communication network (TCN) — Part 2-2: Wire Train Bus conformance testing

IEC 61375-2-2:2012

 

 

Cenelec

EN 61375-2-5:2015

Electronic railway equipment — Train communication network (TCN) — Part 2-5: Ethernet train backbone

IEC 61375-2-5:2014

 

 

Cenelec

EN 61375-3-1:2012

Electronic railway equipment — Train communication network (TCN) — Part 3-1: Multifunction Vehicle Bus (MVB)

IEC 61375-3-1:2012

 

 

Cenelec

EN 61375-3-2:2012

Electronic railway equipment — Train communication network (TCN) — Part 3-2: MVB (Multifunction Vehicle Bus) conformance testing

IEC 61375-3-2:2012

 

 

Cenelec

EN 61375-3-3:2012

Electronic railway equipment — Train communication network (TCN) — Part 3-3: CANopen Consist Network (CCN)

IEC 61375-3-3:2012

 

 

Cenelec

EN 62580-1:2016

Electronic railway equipment — On-board multimedia and telematic subsystems for railways — Part 1: General architecture

IEC 62580-1:2015

 

 

Cenelec

EN 62621:2016

Railway applications — Fixed installations — Electric traction — Specific requirements for composite insulators used for overhead contact line systems

IEC 62621:2011

EN 50151:2003

Note 2.1

21.12.2018

 

EN 62621:2016/A1:2016

Note 3

21.12.2018

Note 1:

Generally the date of cessation of presumption of conformity will be the date of withdrawal (‘dow’), set by the European standardisation organisation, but attention of users of these standards is drawn to the fact that in certain exceptional cases this can be otherwise.

Note 2.1:

The new (or amended) standard has the same scope as the superseded standard. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation.

Note 2.2:

The new standard has a broader scope than the superseded standard. On the date stated the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation.

Note 2.3:

The new standard has a narrower scope than the superseded standard. On the date stated the (partially) superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation for those products or services that fall within the scope of the new standard. Presumption of conformity with the essential or other requirements of the relevant Union legislation for products or services that still fall within the scope of the (partially) superseded standard, but that do not fall within the scope of the new standard, is unaffected.

Note 3:

In case of amendments, the referenced standard is EN CCCCC:YYYY, its previous amendments, if any, and the new, quoted amendment. The superseded standard therefore consists of EN CCCCC:YYYY and its previous amendments, if any, but without the new quoted amendment. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation.

NOTE:

Any information concerning the availability of the standards can be obtained either from the European standardisation organisations or from the national standardisation bodies the list of which is published in the Official Journal of the European Union according to Article 27 of the Regulation (EU) No 1025/2012 (2).

Standards are adopted by the European standardisation organisations in English (CEN and Cenelec also publish in French and German). Subsequently, the titles of the standards are translated into all other required official languages of the European Union by the national standardisation bodies. The European Commission is not responsible for the correctness of the titles which have been presented for publication in the Official Journal.

References to Corrigenda ‘…/AC:YYYY’ are published for information only. A Corrigendum removes printing, linguistic or similar errors from the text of a standard and may relate to one or more language versions (English, French and/or German) of a standard as adopted by a European standardisation organisation.

Publication of the references in the Official Journal of the European Union does not imply that the standards are available in all the official languages of the European Union.

This list replaces all the previous lists published in the Official Journal of the European Union. The European Commission ensures the updating of this list.

More information about harmonised standards and other European standards on the Internet at:

http://ec.europa.eu/growth/single-market/european-standards/harmonised-standards/index_en.htm


(1)  ESO: European standardisation organisation:

CEN: Avenue Marnix 17, B-1000, Brussels, Tel. +32 25500811; fax +32 25500819 (http://www.cen.eu)

Cenelec: Avenue Marnix 17, B-1000, Brussels, Tel. +32 25196871; fax +32 25196919 (http://www.cenelec.eu)

ETSI: 650, route des Lucioles, F-06921 Sophia Antipolis, Tel. +33 492 944200; fax +33 493654716, (http://www.etsi.eu)

(2)  OJ C 338, 27.9.2014, p. 31.


15.12.2017   

EN

Official Journal of the European Union

C 435/111


Commission communication in the framework of the implementation of Directive 1999/5/EC of the European Parliament and of the Council on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity and Directive 2014/53/EU of the European Parliament and of the Council on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC

(Publication of titles and references of harmonised standards under Union harmonisation legislation)

(Text with EEA relevance)

(2017/C 435/05)

Directive 1999/5/EC

In accordance with the transitional provision of Article 48 of Directive 2014/53/EU (1), Member States shall not impede the making available on the market or putting into service of radio equipment covered by Directive 2014/53/EU which is in conformity with Directive 1999/5/EC (2) and which was placed on the market before 13 June 2017. Accordingly, harmonised standards, the references to which have been published under Directive 1999/5/EC, as lastly listed in the Commission communication published in the Official Journal of the European Union C 249 of 8 July 2016, p. 1 , and corrected by the corrigendum published in the Official Journal of the European Union C 342 of 17 September 2016, p. 15 , and the corrigendum published in the Official Journal of the European Union C 403 of 1 November 2016, p. 26 , continue to confer a presumption of conformity with that Directive until 12 June 2017.

Directive 2014/53/EU

(Publication of titles and references of harmonised standards under Union harmonisation legislation)

ESO (3)

Reference and title of the standard

(and reference document)

First publication OJ

Reference of superseded standard

Date of cessation of presumption of conformity of superseded standard

Note 1

Standard aims to cover Article(s) of Directive 2014/53/EU

(1)

(2)

(3)

(4)

(5)

(6)

Cenelec

EN 50360:2017

Product standard to demonstrate the compliance of wireless communication devices, with the basic restrictions and exposure limit values related to human exposure to electromagnetic fields in the frequency range from 300 MHz to 6 GHz: devices used next to the ear

17.11.2017

 

 

Article 3(1)(a)

Cenelec

EN 50385:2017

Product standard to demonstrate the compliance of base station equipment with radiofrequency electromagnetic field exposure limits (110 MHz — 100 GHz), when placed on the market

17.11.2017

 

 

Article 3(1)(a)

Cenelec

EN 50401:2017

Product standard to demonstrate the compliance of base station equipment with radiofrequency electromagnetic field exposure limits (110 MHz — 100 GHz), when put into service

17.11.2017

 

 

Article 3(1)(a)

Cenelec

EN 50566:2017

Product standard to demonstrate the compliance of wireless communication devices with the basic restrictions and exposure limit values related to human exposure to electromagnetic fields in the frequency range from 30 MHz to 6 GHz: hand-held and body mounted devices in close proximity to the human body

17.11.2017

 

 

Article 3(1)(a)

Cenelec

EN 55035:2017

Electromagnetic compatibility of multimedia equipment — Immunity requirements

CISPR 35:2016 (Modified)

17.11.2017

 

 

Article 3(1)(b)

ETSI

EN 300 065 V2.1.2

Narrow-band direct-printing telegraph equipment for receiving meteorological or navigational information (NAVTEX); Harmonised Standard covering the essential requirements of articles 3.2 and 3.3(g) of the Directive 2014/53/EU

8.7.2016

 

 

Article 3(2); Article 3(3)(g)

ETSI

EN 300 086 V2.1.2

Land Mobile Service; Radio equipment with an internal or external RF connector intended primarily for analogue speech; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU

9.12.2016

 

 

Article 3(2)

ETSI

EN 300 113 V2.2.1

Land Mobile Service; Radio equipment intended for the transmission of data (and/or speech) using constant or non-constant envelope modulation and having an antenna connector; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU

12.4.2017

 

 

Article 3(2)

ETSI

EN 300 219 V2.1.1

Land Mobile Service; Radio equipment transmitting signals to initiate a specific response in the receiver; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU

12.4.2017

 

 

Article 3(2)

ETSI

EN 300 220-2 V3.1.1

Short Range Devices (SRD) operating in the frequency range 25 MHz to 1 000  MHz; Part 2: Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU for non specific radio equipment

10.3.2017

 

 

Article 3(2)

ETSI

EN 300 220-3-1 V2.1.1

Short Range Devices (SRD) operating in the frequency range 25 MHz to 1 000  MHz; Part 3-1: Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU; Low duty cycle high reliability equipment, social alarms equipment operating on designated frequencies (869,200  MHz to 869,250  MHz)

10.3.2017

 

 

Article 3(2)

ETSI

EN 300 220-3-2 V1.1.1

Short Range Devices (SRD) operating in the frequency range 25 MHz to 1 000  MHz; Part 3-2: Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU; Wireless alarms operating in designated LDC/HR frequency bands 868,60  MHz to 868,70  MHz, 869,25  MHz to 869,40  MHz, 869,65  MHz to 869,70  MHz

10.3.2017

 

 

Article 3(2)

ETSI

EN 300 220-4 V1.1.1

Short Range Devices (SRD) operating in the frequency range 25 MHz to 1 000  MHz; Part 4: Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU; Metering devices operating in designated band 169,400  MHz to 169,475  MHz

10.3.2017

 

 

Article 3(2)

ETSI

EN 300 224 V2.1.1

Land Mobile Service; Radio Equipment for use in a Paging Service operating within the frequency range 25 MHz — 470 MHz; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU

13.10.2017

EN 300 224-2 V1.1.1

Note 2.1

28.2.2019

Article 3(2)

ETSI

EN 300 224-2 V1.1.1

Electromagnetic compatibility and Radio spectrum Matters (ERM); On-site paging service; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive

8.6.2017

 

 

Article 3(2)

This harmonised standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters.

ETSI

EN 300 296 V2.1.1

Land Mobile Service; Radio equipment using integral antennas intended primarily for analogue speech; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU

12.4.2017

 

 

Article 3(2)

ETSI

EN 300 328 V2.1.1

Wideband transmission systems; Data transmission equipment operating in the 2,4  GHz ISM band and using wide band modulation techniques; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU

13.1.2017

 

 

Article 3(2)

ETSI

EN 300 330 V2.1.1

Short Range Devices (SRD); Radio equipment in the frequency range 9 kHz to 25 MHz and inductive loop systems in the frequency range 9 kHz to 30 MHz; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU

10.3.2017

 

 

Article 3(2)

ETSI

EN 300 341 V2.1.1

Land Mobile Service; Radio equipment using an integral antenna transmitting signals to initiate a specific response in the receiver; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU

12.4.2017

 

 

Article 3(2)

ETSI

EN 300 390 V2.1.1

Land Mobile Service; Radio equipment intended for the transmission of data (and speech) and using an integral antenna; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU

12.4.2017

 

 

Article 3(2)

ETSI

EN 300 422-1 V2.1.2

Wireless Microphones; Audio PMSE up to 3 GHz; Part 1: Class A Receivers; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU

10.2.2017

 

 

Article 3(2)

ETSI

EN 300 422-2 V2.1.1

Wireless Microphones; Audio PMSE up to 3 GHz; Part 2: Class B Receivers; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU

10.3.2017

 

 

Article 3(2)

ETSI

EN 300 422-3 V2.1.1

Wireless Microphones; Audio PMSE up to 3 GHz; Part 3: Class C Receivers; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU

10.3.2017

 

 

Article 3(2)

ETSI

EN 300 433 V2.1.1

Citizens' Band (CB) radio equipment; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU

12.4.2017

 

 

Article 3(2)

ETSI

EN 300 440 V2.1.1

Short Range Devices (SRD); Radio equipment to be used in the 1 GHz to 40 GHz frequency range; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU

14.7.2017

EN 300 440-2 V1.4.1

Note 2.1

31.12.2018

Article 3(2)

This harmonised standard does not address, for receiver categories 2 and 3 as defined in Table 5, the requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters.

ETSI

EN 300 440-2 V1.4.1

Electromagnetic compatibility and Radio spectrum Matters (ERM); Short range devices; Radio equipment to be used in the 1 GHz to 40 GHz frequency range; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive

8.6.2017

 

 

Article 3(2)

This harmonised standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters.

ETSI

EN 300 454-2 V1.1.1

Electromagnetic compatibility and Radio spectrum Matters (ERM); Wide band audio links; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive

8.6.2017

 

 

Article 3(2)

This harmonised standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters.

ETSI

EN 300 487 V2.1.2

Satellite Earth Stations and Systems (SES); Harmonised Standard for Receive-Only Mobile Earth Stations (ROMES) providing data communications operating in the 1,5  GHz frequency band; Radio Frequency (RF) specifications covering the essential requirements of article 3.2 of the Directive 2014/53/EU

13.1.2017

 

 

Article 3(2)

ETSI

EN 300 676-2 V2.1.1

Ground-based VHF hand-held, mobile and fixed radio transmitters, receivers and transceivers for the VHF aeronautical mobile service using amplitude modulation; Part 2: Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU

8.7.2016

 

 

Article 3(2)

ETSI

EN 300 698 V2.1.1

Radio telephone transmitters and receivers for the maritime mobile service operating in the VHF bands used on inland waterways; Harmonised Standard covering the essential requirements of articles 3.2 and 3.3(g) of the Directive 2014/53/EU

13.1.2017

 

 

Article 3(2); Article 3(3)(g)

ETSI

EN 300 698 V2.2.1

Radio telephone transmitters and receivers for the maritime mobile service operating in the VHF bands used on inland waterways; Harmonised Standard covering the essential requirements of articles 3.2 and 3.3(g) of Directive 2014/53/EU

This is the first publication

EN 300 698 V2.1.1

Note 2.1

31.5.2018

Article 3(2); Article 3(3)(g)

ETSI

EN 300 718-2 V1.1.1

Electromagnetic compatibility and Radio spectrum Matters (ERM); Avalanche Beacons; Transmitter-receiver systems; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive

8.6.2017

 

 

Article 3(2)

This harmonised standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters.

ETSI

EN 300 718-3 V1.2.1

Electromagnetic compatibility and Radio spectrum Matters (ERM); Avalanche Beacons; Transmitter-receiver systems; Part 3: Harmonized EN covering essential requirements of article 3.3e of the R&TTE Directive

8.6.2017

 

 

Article 3(3)(g)

ETSI

EN 300 720 V2.1.1

Ultra-High Frequency (UHF) on-board vessels communications systems and equipment; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU

10.3.2017

 

 

Article 3(2)

ETSI

EN 301 025 V2.1.1

VHF radiotelephone equipment for general communications and associated equipment for Class ‘D’ Digital Selective Calling (DSC); Harmonised Standard covering the essential requirements of articles 3.2 and 3.3(g) of the Directive 2014/53/EU

12.8.2016

 

 

Article 3(2); Article 3(3)(g)

ETSI

EN 301 025 V2.2.1

VHF radiotelephone equipment for general communications and associated equipment for Class ‘D’ Digital Selective Calling (DSC); Harmonised Standard covering the essential requirements of articles 3.2 and 3.3(g) of Directive 2014/53/EU

12.4.2017

EN 301 025 V2.1.1

Note 2.1

30.11.2018

Article 3(2); Article 3(3)(g)

ETSI

EN 301 091-2 V1.3.2

Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices; Road Transport and Traffic Telematics (RTTT); Radar equipment operating in the 76 GHz to 77 GHz range; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive

8.6.2017

 

 

Article 3(2)

This harmonised standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters.

ETSI

EN 301 166 V2.1.1

Land Mobile Service; Radio equipment for analogue and/or digital communication (speech and/or data) and operating on narrow band channels and having an antenna connector; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU

10.2.2017

 

 

Article 3(2)

ETSI

EN 301 178 V2.2.2

Portable Very High Frequency (VHF) radiotelephone equipment for the maritime mobile service operating in the VHF bands (for non-GMDSS applications only); Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU

12.5.2017

 

 

Article 3(2)

ETSI

EN 301 357 V2.1.1

Cordless audio devices in the range 25 MHz to 2 000  MHz; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU

14.7.2017

EN 301 357-2 V1.4.1

Note 2.1

28.2.2019

Article 3(2)

ETSI

EN 301 357-2 V1.4.1

Electromagnetic compatibility and Radio spectrum Matters (ERM); Cordless audio devices in the range 25 MHz to 2 000  MHz; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive

8.6.2017

 

 

Article 3(2)

This harmonised standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters.

ETSI

EN 301 360 V2.1.1

Satellite Earth Stations and Systems (SES); Harmonised Standard for Satellite Interactive Terminals (SIT) and Satellite User Terminals (SUT) transmitting towards satellites in geostationary orbit, operating in the 27,5  GHz to 29,5  GHz frequency bands covering the essential requirements of article 3.2 of the Directive 2014/53/EU

11.11.2016

 

 

Article 3(2)

ETSI

EN 301 406 V2.2.2

Digital Enhanced Cordless Telecommunications (DECT); Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU

11.11.2016

 

 

Article 3(2)

ETSI

EN 301 426 V2.1.2

Satellite Earth Stations and Systems (SES); Harmonised Standard for Low data rate Land Mobile satellite Earth Stations (LMES) and Maritime Mobile satellite Earth Stations (MMES) not intended for distress and safety communications operating in the 1,5  GHz/1,6  GHz frequency bands covering the essential requirements of article 3.2 of the Directive 2014/53/EU

13.1.2017

 

 

Article 3(2)

ETSI

EN 301 427 V2.1.1

Satellite Earth Stations and Systems (SES); Harmonised Standard for low data rate Mobile satellite Earth Stations (MES) except aeronautical mobile satellite earth stations, operating in the 11/12/14 GHz frequency bands covering the essential requirements of article 3.2 of the Directive 2014/53/EU

12.4.2017

 

 

Article 3(2)

ETSI

EN 301 428 V2.1.2

Satellite Earth Stations and Systems (SES); Harmonised Standard for Very Small Aperture Terminal (VSAT); Transmit-only, transmit/receive or receive-only satellite earth stations operating in the 11/12/14 GHz frequency bands covering the essential requirements of article 3.2 of Directive 2014/53/EU

8.6.2017

 

 

Article 3(2)

ETSI

EN 301 430 V2.1.1

Satellite Earth Stations and Systems (SES); Harmonised Standard for Satellite News Gathering Transportable Earth Stations (SNG TES) operating in the 11 GHz to 12 GHz/13 GHz to 14 GHz frequency bands covering the essential requirements of article 3.2 of the Directive 2014/53/EU

14.10.2016

 

 

Article 3(2)

ETSI

EN 301 441 V2.1.1

Satellite Earth Stations and Systems (SES); Harmonised Standard for Mobile Earth Stations (MES), including handheld earth stations, for Satellite Personal Communications Networks (S-PCN) operating in the 1,6  GHz/2,4  GHz frequency band under the Mobile Satellite Service (MSS) covering the essential requirements of article 3.2 of the Directive 2014/53/EU

12.4.2017

 

 

Article 3(2)

ETSI

EN 301 442 V2.1.1

Satellite Earth Stations and Systems (SES); Harmonised Standard for NGSO Mobile Earth Stations (MES) including handheld earth stations, for Satellite Personal Communications Networks (S-PCN) operating in the 1 980  MHz to 2 010  MHz (earth-to-space) and 2 170  MHz to 2 200  MHz (space-to-earth) frequency bands under the Mobile Satellite Service (MSS) covering the essential requirements of article 3.2 of the Directive 2014/53/EU

12.4.2017

 

 

Article 3(2)

ETSI

EN 301 443 V2.1.1

Satellite Earth Stations and Systems (SES); Harmonised Standard for Very Small Aperture Terminal (VSAT); Transmit-only, transmit-and-receive, receive-only satellite earth stations operating in the 4 GHz and 6 GHz frequency bands covering the essential requirements of article 3.2 of the Directive 2014/53/EU

12.4.2017

 

 

Article 3(2)

ETSI

EN 301 444 V2.1.2

Satellite Earth Stations and Systems (SES); Harmonised Standard for Land Mobile Earth Stations (LMES) providing voice and/or data communications, operating in the 1,5  GHz and 1,6  GHz frequency bands covering the essential requirements of article 3.2 of the Directive 2014/53/EU

13.1.2017

 

 

Article 3(2)

ETSI

EN 301 447 V2.1.1

Satellite Earth Stations and Systems (SES); Harmonised Standard for satellite Earth Stations on board Vessels (ESVs) operating in the 4/6 GHz frequency bands allocated to the Fixed Satellite Service (FSS) covering the essential requirements of article 3.2 of the Directive 2014/53/EU

12.4.2017

 

 

Article 3(2)

ETSI

EN 301 459 V2.1.1

Satellite Earth Stations and Systems (SES); Harmonised Standard for Satellite Interactive Terminals (SIT) and Satellite User Terminals (SUT) transmitting towards satellites in geostationary orbit, operating in the 29,5  GHz to 30,0  GHz frequency bands covering the essential requirements of article 3.2 of the Directive 2014/53/EU

14.10.2016

 

 

Article 3(2)

ETSI

EN 301 473 V2.1.2

Satellite Earth Stations and Systems (SES); Harmonised Standard for Aircraft Earth Stations (AES) providing Aeronautical Mobile Satellite Service (AMSS)/Mobile Satellite Service (MSS) and/or the Aeronautical Mobile Satellite on Route Service (AMS(R)S)/Mobile Satellite Service (MSS), operating in the frequency band below 3 GHz covering the essential requirements of article 3.2 of the Directive 2014/53/EU

13.1.2017

 

 

Article 3(2)

ETSI

EN 301 502 V12.5.2

Global System for Mobile communications (GSM); Base Station (BS) equipment; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU

12.4.2017

 

 

Article 3(2)

ETSI

EN 301 511 V9.0.2

Global System for Mobile communications (GSM); Harmonized EN for mobile stations in the GSM 900 and GSM 1800 bands covering essential requirements under article 3.2 of the R&TTE directive (1999/5/EC)

12.4.2017

 

 

Article 3(2)

Notice: This harmonised standard provides presumption of conformity with the essential requirements of Directive 2014/53/EU if also the receiving parameters in clause(s) 4.2.20, 4.2.21 and 4.2.26 are applied

ETSI

EN 301 559 V2.1.1

Short Range Devices (SRD); Low Power Active Medical Implants (LP-AMI) and associated Peripherals (LP-AMI-P) operating in the frequency range 2 483,5  MHz to 2 500  MHz; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU

13.1.2017

 

 

Article 3(2)

ETSI

EN 301 598 V1.1.1

White Space Devices (WSD); Wireless Access Systems operating in the 470 MHz to 790 MHz TV broadcast band; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive

8.6.2017

 

 

Article 3(2)

This harmonised standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters.

ETSI

EN 301 681 V2.1.2

Satellite Earth Stations and Systems (SES); Harmonised Standard for Mobile Earth Stations (MES) of Geostationary mobile satellite systems, including handheld earth stations, for Satellite Personal Communications Networks (S-PCN) under the Mobile Satellite Service (MSS), operating in the 1,5  GHz and 1,6  GHz frequency bands covering the essential requirements of article 3.2 of the Directive 2014/53/EU

13.1.2017

 

 

Article 3(2)

ETSI

EN 301 721 V2.1.1

Satellite Earth Stations and Systems (SES); Harmonised Standard for Mobile Earth Stations (MES) providing Low Bit Rate Data Communications (LBRDC) using Low Earth Orbiting (LEO) satellites operating below 1 GHz frequency band covering the essential requirements of article 3.2 of the Directive 2014/53/EU

12.4.2017

 

 

Article 3(2)

ETSI

EN 301 783 V2.1.1

Commercially available amateur radio equipment; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU

8.7.2016

 

 

Article 3(2)

ETSI

EN 301 839 V2.1.1

Ultra Low Power Active Medical Implants (ULP-AMI) and associated Peripherals (ULP-AMI-P) operating in the frequency range 402 MHz to 405 MHz; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU

8.7.2016

 

 

Article 3(2)

ETSI

EN 301 841-3 V2.1.1

VHF air-ground Digital Link (VDL) Mode 2; Technical characteristics and methods of measurement for ground-based equipment; Part 3: Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU

13.1.2017

 

 

Article 3(2)

ETSI

EN 301 842-5 V2.1.1

VHF air-ground Digital Link (VDL) Mode 4 radio equipment; Technical characteristics and methods of measurement for ground-based equipment; Part 5: Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU

13.1.2017

 

 

Article 3(2)

ETSI

EN 301 893 V1.8.1

Broadband Radio Access Networks (BRAN); 5 GHz high performance RLAN; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive

8.6.2017

 

 

Article 3(2)

This harmonised standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters.

ETSI

EN 301 893 V2.1.1

5 GHz RLAN; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU

8.6.2017

EN 301 893 V1.8.1

Note 2.1

12.6.2018

Article 3(2)

As regards adaptivity, until 12.6.2018, either clause 4.2.7 of this harmonised standard or clause 4.8 of harmonised standard EN 301 893 v1.8.1 may be used; after that date, only clause 4.2.7 of this harmonised standard may be used.

ETSI

EN 301 908-1 V11.1.1

IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 1: Introduction and common requirements

9.12.2016

 

 

Article 3(2)

ETSI

EN 301 908-2 V11.1.1

IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 2: CDMA Direct Spread (UTRA FDD) User Equipment (UE)

12.4.2017

 

 

Article 3(2)

ETSI

EN 301 908-2 V11.1.2

IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU; Part 2: CDMA Direct Spread (UTRA FDD) User Equipment (UE)

13.10.2017

EN 301 908-2 V11.1.1

Note 2.1

28.2.2019

Article 3(2)

ETSI

EN 301 908-3 V11.1.3

IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU; Part 3: CDMA Direct Spread (UTRA FDD) Base Stations (BS)

12.5.2017

 

 

Article 3(2)

ETSI

EN 301 908-10 V4.2.2

Electromagnetic compatibility and Radio spectrum Matters (ERM); Base Stations (BS), Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular networks; Part 10: Harmonised Standard for IMT-2000, FDMA/TDMA (DECT) covering the essential requirements of article 3.2 of the Directive 2014/53/EU

13.1.2017

 

 

Article 3(2)

ETSI

EN 301 908-11 V11.1.2

IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 11: CDMA Direct Spread (UTRA FDD) Repeaters

10.2.2017

 

 

Article 3(2)

ETSI

EN 301 908-12 V7.1.1

IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 12: CDMA Multi-Carrier (cdma2000) Repeaters

9.9.2016

 

 

Article 3(2)

ETSI

EN 301 908-13 V11.1.1

IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 13: Evolved Universal Terrestrial Radio Access (E-UTRA) User Equipment (UE)

12.5.2017

 

 

Article 3(2)

ETSI

EN 301 908-13 V11.1.2

IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU; Part 13: Evolved Universal Terrestrial Radio Access (E-UTRA) User Equipment (UE)

13.10.2017

EN 301 908-13 V11.1.1

Note 2.1

28.2.2019

Article 3(2)

ETSI

EN 301 908-14 V11.1.2

IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU; Part 14: Evolved Universal Terrestrial Radio Access (E-UTRA) Base Stations (BS)

12.5.2017

 

 

Article 3(2)

ETSI

EN 301 908-15 V11.1.2

IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU; Part 15: Evolved Universal Terrestrial Radio Access (E-UTRA FDD) Repeaters

10.2.2017

 

 

Article 3(2)

ETSI

EN 301 908-18 V11.1.2

IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU; Part 18: E-UTRA, UTRA and GSM/EDGE Multi-Standard Radio (MSR) Base Station (BS)

12.5.2017

 

 

Article 3(2)

ETSI

EN 301 908-19 V6.3.1

IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 19: OFDMA TDD WMAN (Mobile WiMAXTM) TDD User Equipment (UE)

8.6.2017

 

 

Article 3(2)

ETSI

EN 301 908-20 V6.3.1

IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 20: OFDMA TDD WMAN (Mobile WiMAXTM) TDD Base Stations (BS)

14.10.2016

 

 

Article 3(2)

ETSI

EN 301 908-21 V6.1.1

IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 21: OFDMA TDD WMAN (Mobile WiMAXTM) FDD User Equipment (UE)

14.10.2016

 

 

Article 3(2)

ETSI

EN 301 908-22 V6.1.1

IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 22: OFDMA TDD WMAN (Mobile WiMAXTM) FDD Base Stations (BS)

9.12.2016

 

 

Article 3(2)

ETSI

EN 301 929 V2.1.1

VHF transmitters and receivers as Coast Stations for GMDSS and other applications in the maritime mobile service; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU

12.4.2017

 

 

Article 3(2)

ETSI

EN 302 017 V2.1.1

Transmitting equipment for the Amplitude Modulated (AM) sound broadcasting service; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU

12.5.2017

 

 

Article 3(2)

ETSI

EN 302 018 V2.1.1

Transmitting equipment for the Frequency Modulated (FM) sound broadcasting service; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU

8.6.2017

EN 302 018-2 V1.2.1

Note 2.1

31.12.2018

Article 3(2)

ETSI

EN 302 018-2 V1.2.1

Electromagnetic compatibility and Radio spectrum Matters (ERM); Transmitting equipment for the Frequency Modulated (FM) sound broadcasting service; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive

12.4.2017

 

 

Article 3(2)

ETSI

EN 302 054 V2.1.1

Meteorological Aids (Met Aids); Radiosondes to be used in the 400,15  MHz to 406 MHz frequency range with power levels ranging up to 200 mW; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU

This is the first publication

EN 302 054-2 V1.2.1

Note 2.1

31.5.2018

Article 3(2)

ETSI

EN 302 054-2 V1.2.1

Meteorological Aids (Met Aids); Radiosondes to be used in the 400,15  MHz to 406 MHz frequency range with power levels ranging up to 200 mW; Part 2: Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU

13.1.2017

 

 

Article 3(2)

ETSI

EN 302 064-2 V1.1.1

Electromagnetic compatibility and Radio spectrum Matters (ERM); Wireless Video Links (WVL) operating in the 1,3  GHz to 50 GHz frequency band; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive

8.6.2017

 

 

Article 3(2)

This harmonised standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters.

ETSI

EN 302 065-1 V2.1.1

Short Range Devices (SRD) using Ultra Wide Band technology (UWB); Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 1: Requirements for Generic UWB applications

10.3.2017

 

 

Article 3(2)

ETSI

EN 302 065-2 V2.1.1

Short Range Devices (SRD) using Ultra Wide Band technology (UWB); Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 2: Requirements for UWB location tracking

10.3.2017

 

 

Article 3(2)

ETSI

EN 302 065-3 V2.1.1

Short Range Devices (SRD) using Ultra Wide Band technology (UWB); Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 3: Requirements for UWB devices for ground based vehicular applications

10.3.2017

 

 

Article 3(2)

ETSI

EN 302 065-4 V1.1.1

Short Range Devices (SRD) using Ultra Wide Band technology (UWB); Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 4: Material Sensing devices using UWB technology below 10,6  GHz

12.4.2017

 

 

Article 3(2)

ETSI

EN 302 066-2 V1.2.1

Electromagnetic compatibility and Radio spectrum Matters (ERM); Ground- and Wall- Probing Radar applications (GPR/WPR) imaging systems; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive

8.6.2017

 

 

Article 3(2)

This harmonised standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters.

ETSI

EN 302 077-2 V1.1.1

Electromagnetic compatibility and Radio spectrum Matters (ERM); Transmitting equipment for the Terrestrial — Digital Audio Broadcasting (T-DAB) service; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive

12.4.2017

 

 

Article 3(2)

ETSI

EN 302 186 V2.1.1

Satellite Earth Stations and Systems (SES); Harmonised Standard for satellite mobile Aircraft Earth Stations (AESs) operating in the 11/12/14 GHz frequency bands covering the essential requirements of article 3.2 of the Directive 2014/53/EU

12.4.2017

 

 

Article 3(2)

ETSI

EN 302 194-2 V1.1.2

Electromagnetic compatibility and Radio spectrum Matters (ERM); Navigation radar used on inland waterways; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive

8.6.2017

 

 

Article 3(2)

This harmonised standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters.

ETSI

EN 302 195 V2.1.1

Short Range Devices (SRD); Ultra Low Power Active Medical Implants (ULP-AMI) and accessories (ULP-AMI-P) operating in the frequency range 9 kHz to 315 kHz Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU

11.11.2016

 

 

Article 3(2)

ETSI

EN 302 208 V3.1.1

Radio Frequency Identification Equipment operating in the band 865 MHz to 868 MHz with power levels up to 2 W and in the band 915 MHz to 921 MHz with power levels up to 4 W; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU

12.4.2017

 

 

Article 3(2)

ETSI

EN 302 217-2 V3.1.1

Fixed Radio Systems; Characteristics and requirements for point-to-point equipment and antennas; Part 2: Digital systems operating in frequency bands from 1 GHz to 86 GHz; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU

8.6.2017

EN 302 217-2-2 V2.2.1

Note 2.1

31.12.2018

Article 3(2)

ETSI

EN 302 217-2-2 V2.2.1

Fixed Radio Systems; Characteristics and requirements for point-to-point equipment and antennas; Part 2-2: Digital systems operating in frequency bands where frequency coordination is applied; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive

12.4.2017

 

 

Article 3(2)

Notice: This harmonised standard provides presumption of conformity with the essential requirements of Directive 2014/53/EU if also the receiving parameters in clause(s) 4.3.1, 4.3.2, 4.3.3 and 4.3.4 are applied

ETSI

EN 302 245-2 V1.1.1

Electromagnetic compatibility and Radio spectrum Matters (ERM); Transmitting equipment for the Digital Radio Mondiale (DRM) broadcasting service Part 2: Harmonized EN under article 3.2 of the R&TTE Directive

12.4.2017

 

 

Article 3(2)

ETSI

EN 302 248 V2.1.1

Navigation radar for use on non-SOLAS vessels; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU

10.3.2017

 

 

Article 3(2)

ETSI

EN 302 264-2 V1.1.1

Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices; Road Transport and Traffic Telematics (RTTT); Short Range Radar equipment operating in the 77 GHz to 81 GHz band; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive

8.6.2017

 

 

Article 3(2)

This harmonised standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters.

ETSI