ISSN 1977-091X
Official Journal
of the European Union
C 435
English edition
Information and Notices
Volume 60
15 December 2017
|
ISSN 1977-091X |
||
|
Official Journal of the European Union |
C 435 |
|
|
|
||
|
English edition |
Information and Notices |
Volume 60 |
|
|
|
|
|
(1) Text with EEA relevance. |
|
EN |
|
IV Notices
NOTICES FROM EUROPEAN UNION INSTITUTIONS, BODIES, OFFICES AND AGENCIES
European Commission
|
15.12.2017 |
EN |
Official Journal of the European Union |
C 435/1 |
Commission communication in the framework of the implementation of Directive 2000/9/EC of the European Parliament and of the Council relating to cableway installations designed to carry persons
(Publication of titles and references of harmonised standards under Union harmonisation legislation)
(Text with EEA relevance)
(2017/C 435/01)
|
ESO (1) |
Reference and title of the standard (and reference document) |
First publication OJ |
Reference of superseded standard |
Date of cessation of presumption of conformity of superseded standard Note 1 |
|
(1) |
(2) |
(3) |
(4) |
(5) |
|
CEN |
EN 1709:2004 Safety requirements for cableway installations designed to carry persons — Precommissioning inspection, maintenance, operational inspection and checks |
26.4.2005 |
|
|
|
CEN |
EN 1908:2015 Safety requirements of cableway installations designed to carry persons — Tensioning devices |
11.12.2015 |
EN 1908:2004 Note 2.1 |
19.5.2016 |
|
CEN |
EN 1909:2017 Safety requirements for cableway installations designed to carry persons — Recovery and evacuation |
This is the first publication |
EN 1909:2004 Note 2.1 |
31.3.2018 |
|
CEN |
EN 12385-8:2002 Steel wire ropes — Safety — Part 8: Stranded hauling and carrying-hauling ropes for cableway installations designed to carry persons |
24.4.2003 |
|
|
|
CEN |
EN 12385-9:2002 Steel wire ropes — Safety — Part 9: Locked coil carrying ropes for cableway installations designed to carry persons |
24.4.2003 |
|
|
|
CEN |
EN 12397:2004 Safety requirements for cableway installations designed to carry persons — Operation |
26.4.2005 |
|
|
|
CEN |
EN 12927-1:2004 Safety requirements for cableway installations designed to carry persons — Ropes — Part 1: Selection criteria for ropes and their end fixings |
26.4.2005 |
|
|
|
CEN |
EN 12927-2:2004 Safety requirements for cableway installations designed to carry persons — Ropes — Part 2: Safety factors |
26.4.2005 |
|
|
|
CEN |
EN 12927-3:2004 Safety requirements for cableway installations designed to carry persons — Ropes — Part 3: Long splicing of 6 strand hauling, carrying hauling and towing ropes |
26.4.2005 |
|
|
|
CEN |
EN 12927-4:2004 Safety requirements for cableway installations designed to carry persons — Ropes — Part 4: End fixings |
26.4.2005 |
|
|
|
CEN |
EN 12927-5:2004 Safety requirements for cableway installations designed to carry persons — Ropes — Part 5: Storage, transportation, installation and tensioning |
26.4.2005 |
|
|
|
CEN |
EN 12927-6:2004 Safety requirements for cableway installations designed to carry persons — Ropes — Part 6: Discard criteria |
26.4.2005 |
|
|
|
CEN |
EN 12927-7:2004 Safety requirements for cableway installations designed to carry persons — Ropes — Part 7: Inspection, repair and maintenance |
26.4.2005 |
|
|
|
CEN |
EN 12927-8:2004 Safety requirements for cableway installations designed to carry persons — Ropes — Part 8: Magnetic rope testing (MRT) |
26.4.2005 |
|
|
|
CEN |
EN 12929-1:2015 Safety requirements for cableway installations designed to carry persons — General requirements — Part 1: Requirements for all installations |
14.8.2015 |
EN 12929-1:2004 Note 2.1 |
31.1.2016 |
|
CEN |
EN 12929-2:2015 Safety requirements for cableway installations designed to carry persons — General requirements — Part 2: Additional requirements for reversible bicable aerial ropeways without carrier truck brakes |
14.8.2015 |
EN 12929-2:2004 Note 2.1 |
31.1.2016 |
|
CEN |
EN 12930:2015 Safety requirements for cableway installations designed to carry persons — Calculations |
14.8.2015 |
EN 12930:2004 Note 2.1 |
31.1.2016 |
|
CEN |
EN 13107:2015 Safety requirements for cableway installations designed to carry persons — Civil engineering works |
11.12.2015 |
EN 13107:2004 Note 2.1 |
19.5.2016 |
|
|
EN 13107:2015/AC:2016 |
|
|
|
|
CEN |
EN 13223:2015 Safety requirements for cableway installations designed to carry persons — Drive systems and other mechanical equipment |
11.12.2015 |
EN 13223:2004 Note 2.1 |
19.5.2016 |
|
CEN |
EN 13243:2015 Safety requirements for cableway installations designed to carry persons — Electrical equipment other than for drive systems |
14.8.2015 |
EN 13243:2004 Note 2.1 |
31.1.2016 |
|
CEN |
EN 13796-1:2017 Safety requirements for cableway installations designed to carry persons — Carriers — Part 1: Grips, carrier trucks, on-board brakes, cabins, chairs, carriages, maintenance carriers, tow-hangers |
This is the first publication |
EN 13796-1:2005 Note 2.1 |
31.3.2018 |
|
CEN |
EN 13796-2:2005 Safety requirements for cableway installations designed to carry persons — Carriers — Part 2: Slipping resistance test for grips |
20.9.2005 |
|
|
|
CEN |
EN 13796-3:2005 Safety requirements for cableway installations designed to carry persons — Carriers — Part 3: Fatigue tests |
20.9.2005 |
|
|
|
Note 1: |
Generally the date of cessation of presumption of conformity will be the date of withdrawal (‘dow’), set by the European standardisation organisation, but attention of users of these standards is drawn to the fact that in certain exceptional cases this can be otherwise. |
|
Note 2.1: |
The new (or amended) standard has the same scope as the superseded standard. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
|
Note 2.2: |
The new standard has a broader scope than the superseded standard. On the date stated the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
|
Note 2.3: |
The new standard has a narrower scope than the superseded standard. On the date stated the (partially) superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation for those products or services that fall within the scope of the new standard. Presumption of conformity with the essential or other requirements of the relevant Union legislation for products or services that still fall within the scope of the (partially) superseded standard, but that do not fall within the scope of the new standard, is unaffected. |
|
Note 3: |
In case of amendments, the referenced standard is EN CCCCC:YYYY, its previous amendments, if any, and the new, quoted amendment. The superseded standard therefore consists of EN CCCCC:YYYY and its previous amendments, if any, but without the new quoted amendment. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
NOTE:
|
— |
Any information concerning the availability of the standards can be obtained either from the European standardisation organisations or from the national standardisation bodies the list of which is published in the Official Journal of the European Union according to Article 27 of the Regulation (EU) No 1025/2012 (2). |
|
— |
Standards are adopted by the European standardisation organisations in English (CEN and Cenelec also publish in French and German). Subsequently, the titles of the standards are translated into all other required official languages of the European Union by the national standardisation bodies. The European Commission is not responsible for the correctness of the titles which have been presented for publication in the Official Journal. |
|
— |
References to Corrigenda ‘…/AC:YYYY’ are published for information only. A Corrigendum removes printing, linguistic or similar errors from the text of a standard and may relate to one or more language versions (English, French and/or German) of a standard as adopted by a European standardisation organisation. |
|
— |
Publication of the references in the Official Journal of the European Union does not imply that the standards are available in all the official languages of the European Union. |
|
— |
This list replaces all the previous lists published in the Official Journal of the European Union. The European Commission ensures the updating of this list. |
|
— |
More information about harmonised standards and other European standards on the Internet at: http://ec.europa.eu/growth/single-market/european-standards/harmonised-standards/index_en.htm |
(1) ESO: European standardisation organisation:
|
— |
CEN: Avenue Marnix/Marnixlaan 17, 1000 Bruxelles/Brussel, BELGIQUE/BELGIË; tel. +32 25500811; fax +32 25500819 (http://www.cen.eu) |
|
— |
Cenelec: Avenue Marnix/Marnixlaan 17, 1000 Bruxelles/Brussel, BELGIQUE/BELGIË; tel. +32 25196871; fax +32 25196919 (http://www.cenelec.eu) |
|
— |
ETSI: 650 route des Lucioles, 06921 Sophia Antipolis, FRANCE; tel. +33 492944200; fax +33 493654716 (http://www.etsi.eu) |
(2) OJ C 338, 27.9.2014, p. 31.
|
15.12.2017 |
EN |
Official Journal of the European Union |
C 435/6 |
Commission communication in the framework of the implementation of the Council Directive 89/686/EEC on the approximation of the laws of the Member States relating to personal protective equipment
(Publication of titles and references of harmonised standards under Union harmonisation legislation)
(Text with EEA relevance)
(2017/C 435/02)
|
ESO (1) |
Reference and title of the standard (and reference document) |
First publication OJ |
Reference of superseded standard |
Date of cessation of presumption of conformity of superseded standard Note 1 |
||||||||
|
(1) |
(2) |
(3) |
(4) |
(5) |
||||||||
|
CEN |
EN 132:1998 Respiratory protective devices — Definitions of terms and pictograms |
4.6.1999 |
EN 132:1990 Note 2.1 |
30.6.1999 |
||||||||
|
CEN |
EN 133:2001 Respiratory protective devices — Classification |
10.8.2002 |
EN 133:1990 Note 2.1 |
10.8.2002 |
||||||||
|
CEN |
EN 134:1998 Respiratory protective devices — Nomenclature of components |
13.6.1998 |
EN 134:1990 Note 2.1 |
31.7.1998 |
||||||||
|
CEN |
EN 135:1998 Respiratory protective devices — List of equivalent terms |
4.6.1999 |
EN 135:1990 Note 2.1 |
30.6.1999 |
||||||||
|
CEN |
EN 136:1998 Respiratory protective devices — Full face masks — Requirements, testing, marking |
13.6.1998 |
EN 136:1989 EN 136-10:1992 Note 2.1 |
31.7.1998 |
||||||||
|
|
EN 136:1998/AC:2003 |
|
|
|
||||||||
|
CEN |
EN 137:2006 Respiratory protective devices — Self-contained open-circuit compressed air breathing apparatus with full face mask — Requirements, testing, marking |
23.11.2007 |
EN 137:1993 Note 2.1 |
23.11.2007 |
||||||||
|
CEN |
EN 138:1994 Respiratory protective devices — Fresh air hose breathing apparatus for use with full face mask, half mask or mouthpiece assembly — Requirements, testing, marking |
16.12.1994 |
|
|
||||||||
|
CEN |
EN 140:1998 Respiratory protective devices — Half masks and quarter masks — Requirements, testing, marking |
6.11.1998 |
EN 140:1989 Note 2.1 |
31.3.1999 |
||||||||
|
|
EN 140:1998/AC:1999 |
|
|
|
||||||||
|
CEN |
EN 142:2002 Respiratory protective devices — Mouthpiece assemblies — Requirements, testing, marking |
10.4.2003 |
EN 142:1989 Note 2.1 |
10.4.2003 |
||||||||
|
CEN |
EN 143:2000 Respiratory protective devices — Particle filters — Requirements, testing, marking |
24.1.2001 |
EN 143:1990 Note 2.1 |
24.1.2001 |
||||||||
|
|
EN 143:2000/A1:2006 |
21.12.2006 |
Note 3 |
21.12.2006 |
||||||||
|
|
EN 143:2000/AC:2005 |
|
|
|
||||||||
|
CEN |
EN 144-1:2000 Respiratory protective devices — Gas cylinder valves — Part 1: Thread connections for insert connector |
24.1.2001 |
EN 144-1:1991 Note 2.1 |
24.1.2001 |
||||||||
|
|
EN 144-1:2000/A1:2003 |
21.2.2004 |
Note 3 |
21.2.2004 |
||||||||
|
|
EN 144-1:2000/A2:2005 |
6.10.2005 |
Note 3 |
31.12.2005 |
||||||||
|
CEN |
EN 144-2:1998 Respiratory protective devices — Gas cylinder valves — Part 2: Outlet connections |
4.6.1999 |
|
|
||||||||
|
CEN |
EN 144-3:2003 Respiratory protective devices — Gas cylinder valves — Part 3: Outlet connections for diving gases Nitrox and oxygen |
21.2.2004 |
|
|
||||||||
|
|
EN 144-3:2003/AC:2003 |
|
|
|
||||||||
|
CEN |
EN 145:1997 Respiratory protective devices — Self-contained closed-circuit breathing apparatus compressed oxygen or compressed oxygen-nitrogen type — Requirements, testing, marking |
19.2.1998 |
EN 145:1988 EN 145-2:1992 Note 2.1 |
28.2.1998 |
||||||||
|
|
EN 145:1997/A1:2000 |
24.1.2001 |
Note 3 |
24.1.2001 |
||||||||
|
CEN |
EN 148-1:1999 Respiratory protective devices — Threads for facepieces — Part 1: Standard thread connection |
4.6.1999 |
EN 148-1:1987 Note 2.1 |
31.8.1999 |
||||||||
|
CEN |
EN 148-2:1999 Respiratory protective devices — Threads for facepieces — Part 2: Centre thread connection |
4.6.1999 |
EN 148-2:1987 Note 2.1 |
31.8.1999 |
||||||||
|
CEN |
EN 148-3:1999 Respiratory protective devices — Threads for facepieces — Part 3: Tread connection M 45 x 3 |
4.6.1999 |
EN 148-3:1992 Note 2.1 |
31.8.1999 |
||||||||
|
CEN |
EN 149:2001+A1:2009 Respiratory protective devices — Filtering half masks to protect against particles — Requirements, testing, marking |
6.5.2010 |
EN 149:2001 Note 2.1 |
6.5.2010 |
||||||||
|
CEN |
EN 166:2001 Personal eye-protection — Specifications |
10.8.2002 |
EN 166:1995 Note 2.1 |
10.8.2002 |
||||||||
|
CEN |
EN 167:2001 Personal eye-protection — Optical test methods |
10.8.2002 |
EN 167:1995 Note 2.1 |
10.8.2002 |
||||||||
|
CEN |
EN 168:2001 Personal eye-protection — Non-optical test methods |
10.8.2002 |
EN 168:1995 Note 2.1 |
10.8.2002 |
||||||||
|
CEN |
EN 169:2002 Personal eye-protection — Filters for welding and related techniques — Transmittance requirements and recommended use |
28.8.2003 |
EN 169:1992 Note 2.1 |
28.8.2003 |
||||||||
|
CEN |
EN 170:2002 Personal eye-protection — Ultraviolet filters — Transmittance requirements and recommended use |
28.8.2003 |
EN 170:1992 Note 2.1 |
28.8.2003 |
||||||||
|
CEN |
EN 171:2002 Personal eye-protection — Infrared filters — Transmittance requirements and recommended use |
10.4.2003 |
EN 171:1992 Note 2.1 |
10.4.2003 |
||||||||
|
CEN |
EN 172:1994 Personal eye protection — Sunglare filters for industrial use |
15.5.1996 |
|
|
||||||||
|
|
EN 172:1994/A2:2001 |
10.8.2002 |
Note 3 |
10.8.2002 |
||||||||
|
|
EN 172:1994/A1:2000 |
4.7.2000 |
Note 3 |
31.10.2000 |
||||||||
|
CEN |
EN 174:2001 Personal eye-protection — Ski goggles for downhill skiing |
21.12.2001 |
EN 174:1996 Note 2.1 |
21.12.2001 |
||||||||
|
CEN |
EN 175:1997 Personal protection — Equipment for eye and face protection during welding and allied processes |
19.2.1998 |
|
|
||||||||
|
CEN |
EN 207:2017 Personal eye-protection equipment — Filters and eye-protectors against laser radiation (laser eye-protectors) |
13.10.2017 |
EN 207:2009 Note 2.1 |
30.10.2017 |
||||||||
|
CEN |
EN 208:2009 Personal eye-protection — Eye-protectors for adjustment work on lasers and laser systems (laser adjustment eye-protectors) |
6.5.2010 |
EN 208:1998 Note 2.1 |
30.6.2010 |
||||||||
|
CEN |
EN 250:2014 Respiratory equipment — Open-circuit self-contained compressed air diving apparatus — Requirements, testing and marking |
12.12.2014 |
EN 250:2000 Note 2.1 |
31.12.2014 |
||||||||
|
CEN |
EN 269:1994 Respiratory protective devices — Powered fresh air hose breathing apparatus incorporating a hood — Requirements, testing, marking |
16.12.1994 |
|
|
||||||||
|
CEN |
EN 342:2004 Protective clothing — Ensembles and garments for protection against cold |
6.10.2005 |
|
|
||||||||
|
|
EN 342:2004/AC:2008 |
|
|
|
||||||||
|
CEN |
EN 343:2003+A1:2007 Protective clothing — Protection against rain |
8.3.2008 |
EN 343:2003 Note 2.1 |
8.3.2008 |
||||||||
|
|
EN 343:2003+A1:2007/AC:2009 |
|
|
|
||||||||
|
CEN |
EN 348:1992 Protective clothing — Test method: Determination of behaviour of materials on impact of small splashes of molten metal |
23.12.1993 |
|
|
||||||||
|
|
EN 348:1992/AC:1993 |
|
|
|
||||||||
|
CEN |
EN 352-1:2002 Hearing protectors — General requirements — Part 1: Ear-Muffs |
28.8.2003 |
EN 352-1:1993 Note 2.1 |
28.8.2003 |
||||||||
|
CEN |
EN 352-2:2002 Hearing protectors — General requirements — Part 2: Ear-plugs |
28.8.2003 |
EN 352-2:1993 Note 2.1 |
28.8.2003 |
||||||||
|
CEN |
EN 352-3:2002 Hearing protectors — General requirements — Part 3: Ear-muffs attached to an industrial safety helmet |
28.8.2003 |
EN 352-3:1996 Note 2.1 |
28.8.2003 |
||||||||
|
CEN |
EN 352-4:2001 Hearing protectors — Safety requirements and testing — Part 4: Level-dependent ear-muffs |
10.8.2002 |
|
|
||||||||
|
|
EN 352-4:2001/A1:2005 |
19.4.2006 |
Note 3 |
30.4.2006 |
||||||||
|
CEN |
EN 352-5:2002 Hearing protectors — Safety requirements and testing — Part 5: Active noise reduction ear-muffs |
28.8.2003 |
|
|
||||||||
|
|
EN 352-5:2002/A1:2005 |
6.5.2010 |
Note 3 |
6.5.2010 |
||||||||
|
CEN |
EN 352-6:2002 Hearing protectors — Safety requirements and testing — Part 6: Ear-muffs with electrical audio input |
28.8.2003 |
|
|
||||||||
|
CEN |
EN 352-7:2002 Hearing protectors — Safety requirements and testing — Part 7: Level-dependent ear-plugs |
28.8.2003 |
|
|
||||||||
|
CEN |
EN 352-8:2008 Hearing protectors — Safety requirements and testing — Part 8: Entertainment audio ear-muffs |
28.1.2009 |
|
|
||||||||
|
CEN |
EN 353-1:2014 Personal fall protection equipment — Guided type fall arresters including an anchor line — Part 1: Guided type fall arresters including a rigid anchor line |
11.12.2015 |
|
|
||||||||
|
CEN |
EN 353-2:2002 Personal protective equipment against falls from a height — Part 2: Guided type fall arresters including a flexible anchor line |
28.8.2003 |
EN 353-2:1992 Note 2.1 |
28.8.2003 |
||||||||
|
CEN |
EN 354:2010 Personal fall protection equipment — Lanyards |
9.7.2011 |
EN 354:2002 Note 2.1 |
9.7.2011 |
||||||||
|
CEN |
EN 355:2002 Personal protective equipment against falls from a height — Energy absorbers |
28.8.2003 |
EN 355:1992 Note 2.1 |
28.8.2003 |
||||||||
|
CEN |
EN 358:1999 Personal protective equipment for work positioning and prevention of falls from a height — Belts for work positioning and restraint and work positioning lanyards |
21.12.2001 |
EN 358:1992 Note 2.1 |
21.12.2001 |
||||||||
|
CEN |
EN 360:2002 Personal protective equipment against falls from a height — Retractable type fall arresters |
28.8.2003 |
EN 360:1992 Note 2.1 |
28.8.2003 |
||||||||
|
CEN |
EN 361:2002 Personal protective equipment against falls from a height — Full body harnesses |
28.8.2003 |
EN 361:1992 Note 2.1 |
28.8.2003 |
||||||||
|
CEN |
EN 362:2004 Personal protective equipment against falls from a height — Connectors |
6.10.2005 |
EN 362:1992 Note 2.1 |
6.10.2005 |
||||||||
|
CEN |
EN 363:2008 Personal fall protection equipment — Personal fall protection systems |
20.6.2008 |
EN 363:2002 Note 2.1 |
31.8.2008 |
||||||||
|
CEN |
EN 364:1992 Personal protective equipment against falls from a height — Test methods |
23.12.1993 |
|
|
||||||||
|
|
EN 364:1992/AC:1993 |
|
|
|
||||||||
|
CEN |
EN 365:2004 Personal protective equipment against falls from a height — General requirements for instructions for use, maintenance, periodic examination, repair, marking and packaging |
6.10.2005 |
EN 365:1992 Note 2.1 |
6.10.2005 |
||||||||
|
|
EN 365:2004/AC:2006 |
|
|
|
||||||||
|
CEN |
EN ISO 374-1:2016 Protective gloves against dangerous chemicals and micro-organisms — Part 1: Terminology and performance requirements for chemical risks (ISO 374-1:2016) |
12.4.2017 |
EN 374-1:2003 Note 2.1 |
31.5.2017 |
||||||||
|
CEN |
EN 374-2:2003 Protective gloves against chemicals and micro-organisms — Part 2: Determination of resistance to penetration |
6.10.2005 |
EN 374-2:1994 Note 2.1 |
6.10.2005 |
||||||||
|
CEN |
EN 374-3:2003 Protective gloves against chemicals and micro-organisms — Part 3: Determination of resistance to permeation by chemicals |
6.10.2005 |
EN 374-3:1994 Note 2.1 |
6.10.2005 |
||||||||
|
|
EN 374-3:2003/AC:2006 |
|
|
|
||||||||
|
CEN |
EN 374-4:2013 Protective gloves against chemicals and micro-organisms — Part 4: Determination of resistance to degradation by chemicals |
11.4.2014 |
|
|
||||||||
|
CEN |
EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms — Part 5: Terminology and performance requirements for micro-organisms risks (ISO 374-5:2016) |
12.4.2017 |
|
|
||||||||
|
CEN |
EN 379:2003+A1:2009 Personal eye-protection — Automatic welding filters |
6.5.2010 |
EN 379:2003 Note 2.1 |
6.5.2010 |
||||||||
|
CEN |
EN 381-1:1993 Protective clothing for users of hand-held chainsaws — Part 1: Test rig for testing resistance to cutting by a chainsaw |
23.12.1993 |
|
|
||||||||
|
CEN |
EN 381-2:1995 Protective clothing for users of hand-held chain saws — Part 2: Test methods for leg protectors |
12.1.1996 |
|
|
||||||||
|
CEN |
EN 381-3:1996 Protective clothing for users of hand-held chain-saws — Part 3: Test methods for footwear |
10.10.1996 |
|
|
||||||||
|
CEN |
EN 381-4:1999 Protective clothing for users of hand-held chainsaws — Part 4: Test methods for chainsaw protective gloves |
16.3.2000 |
|
|
||||||||
|
CEN |
EN 381-5:1995 Protective clothing for users of hand-held chain saws — Part 5: Requirements for leg protectors |
12.1.1996 |
|
|
||||||||
|
CEN |
EN 381-7:1999 Protective clothing for users of hand-held chainsaws — Part 7: Requirements for chainsaw protective gloves |
16.3.2000 |
|
|
||||||||
|
CEN |
EN 381-8:1997 Protective clothing for users of hand-held chain saws — Part 8: Test methods for chain saw protective gaiters |
18.10.1997 |
|
|
||||||||
|
CEN |
EN 381-9:1997 Protective clothing for users of hand-held chain saws — Part 9: Requirements for chain saw protective gaiters |
18.10.1997 |
|
|
||||||||
|
CEN |
EN 381-10:2002 Protective clothing for users of hand-held chainsaws — Part 10: Test method for upper body protectors |
28.8.2003 |
|
|
||||||||
|
CEN |
EN 381-11:2002 Protective clothing for users of hand-held chainsaws — Part 11: Requirements for upper body protectors |
28.8.2003 |
|
|
||||||||
|
CEN |
EN 388:2016 Protective gloves against mechanical risks |
12.4.2017 |
EN 388:2003 Note 2.1 |
31.5.2017 |
||||||||
|
CEN |
EN 397:2012+A1:2012 Industrial safety helmets |
20.12.2012 |
EN 397:2012 Note 2.1 |
30.4.2013 |
||||||||
|
CEN |
EN 402:2003 Respiratory protective devices — Lung governed demand self-contained open-circuit compressed air breathing apparatus with full face mask or mouthpiece assembly for escape — Requirements, testing, marking |
21.2.2004 |
EN 402:1993 Note 2.1 |
21.2.2004 |
||||||||
|
CEN |
EN 403:2004 Respiratory protective devices for self-rescue — Filtering devices with hood for escape from fire — Requirements, testing, marking |
6.10.2005 |
EN 403:1993 Note 2.1 |
6.10.2005 |
||||||||
|
CEN |
EN 404:2005 Respiratory protective devices for self-rescue — Filter self-rescuer from carbon monoxide with mouthpiece assembly |
6.10.2005 |
EN 404:1993 Note 2.1 |
2.12.2005 |
||||||||
|
CEN |
EN 405:2001+A1:2009 Respiratory protective devices — Valved filtering half masks to protect against gases or gases and particles — Requirements, testing, marking |
6.5.2010 |
EN 405:2001 Note 2.1 |
6.5.2010 |
||||||||
|
CEN |
EN 407:2004 Protective gloves against thermal risks (heat and/or fire) |
6.10.2005 |
EN 407:1994 Note 2.1 |
6.10.2005 |
||||||||
|
CEN |
EN 420:2003+A1:2009 Protective gloves — General requirements and test methods |
6.5.2010 |
EN 420:2003 Note 2.1 |
31.5.2010 |
||||||||
|
CEN |
EN 421:2010 Protective gloves against ionizing radiation and radioactive contamination |
9.7.2011 |
EN 421:1994 Note 2.1 |
9.7.2011 |
||||||||
|
CEN |
EN 443:2008 Helmets for fire fighting in buildings and other structures |
20.6.2008 |
EN 443:1997 Note 2.1 |
31.8.2008 |
||||||||
|
CEN |
EN 458:2004 Hearing protectors — Recommendations for selection, use, care and maintenance — Guidance document |
6.10.2005 |
EN 458:1993 Note 2.1 |
6.10.2005 |
||||||||
|
CEN |
EN 464:1994 Protective clothing — Protection against liquid and gaseous chemicals, including aerosols and solid particles — Test method: Determination of leak-tightness of gas-tight suits (Internal pressure test) |
16.12.1994 |
|
|
||||||||
|
CEN |
EN 469:2005 Protective clothing for firefighters — Performance requirements for protective clothing for firefighting |
19.4.2006 |
EN 469:1995 Note 2.1 |
30.6.2006 |
||||||||
|
|
EN 469:2005/AC:2006 |
|
|
|
||||||||
|
|
EN 469:2005/A1:2006 |
23.11.2007 |
Note 3 |
23.11.2007 |
||||||||
|
CEN |
EN 510:1993 Specification for protective clothing for use where there is a risk of entanglement with moving parts |
16.12.1994 |
|
|
||||||||
|
CEN |
EN 511:2006 Protective gloves against cold |
21.12.2006 |
EN 511:1994 Note 2.1 |
21.12.2006 |
||||||||
|
CEN |
EN 530:2010 Abrasion resistance of protective clothing material — Test methods |
9.7.2011 |
EN 530:1994 Note 2.1 |
9.7.2011 |
||||||||
|
CEN |
EN 564:2014 Mountaineering equipment — Accessory cord — Safety requirements and test methods |
11.12.2015 |
EN 564:2006 Note 2.1 |
31.1.2016 |
||||||||
|
CEN |
EN 565:2017 Mountaineering equipment — Tape — Safety requirements and test methods |
This is the first publication |
EN 565:2006 Note 2.1 |
28.2.2018 |
||||||||
|
CEN |
EN 566:2017 Mountaineering equipment — Slings — Safety requirements and test methods |
13.10.2017 |
EN 566:2006 Note 2.1 |
30.10.2017 |
||||||||
|
CEN |
EN 567:2013 Mountaineering equipment — Rope clamps — Safety requirements and test methods |
28.6.2013 |
EN 567:1997 Note 2.1 |
30.9.2013 |
||||||||
|
CEN |
EN 568:2015 Mountaineering equipment — Ice anchors — Safety requirements and test methods |
9.9.2016 |
EN 568:2007 Note 2.1 |
9.9.2016 |
||||||||
|
CEN |
EN 569:2007 Mountaineering equipment — Pitons — Safety requirements and test methods |
8.3.2008 |
EN 569:1997 Note 2.1 |
8.3.2008 |
||||||||
|
CEN |
EN 659:2003+A1:2008 Protective gloves for firefighters |
20.6.2008 |
EN 659:2003 Note 2.1 |
30.9.2008 |
||||||||
|
|
EN 659:2003+A1:2008/AC:2009 |
|
|
|
||||||||
|
CEN |
EN 795:2012 Personal fall protection equipment — Anchor devices |
11.12.2015 |
EN 795:1996 Note 2.1 |
9.9.2016 |
||||||||
|
Warning: This publication does not concern the equipment described in:
In respect of types A, C and D, this publication does not concern either clauses: 4.5, 5.2.2, 6, 7; Annex A or Annex ZA. Accordingly, in respect of the equipment mentioned above, there shall be no presumption of conformity with the provisions of Directive 89/686/EEC because they are not considered to be PPE. |
||||||||||||
|
CEN |
EN 812:2012 Industrial bump caps |
20.12.2012 |
EN 812:1997 Note 2.1 |
30.4.2013 |
||||||||
|
CEN |
EN 813:2008 Personal fall protection equipment — Sit harnesses |
28.1.2009 |
EN 813:1997 Note 2.1 |
28.2.2009 |
||||||||
|
CEN |
EN 863:1995 Protective clothing — Mechanical properties — Test method: Puncture resistance |
15.5.1996 |
|
|
||||||||
|
CEN |
EN 892:2012+A1:2016 Mountaineering equipment — Dynamic mountaineering ropes — Safety requirements and test methods |
12.4.2017 |
EN 892:2012 Note 2.1 |
31.5.2017 |
||||||||
|
CEN |
EN 893:2010 Mountaineering equipment — Crampons — Safety requirements and test methods |
9.7.2011 |
EN 893:1999 Note 2.1 |
9.7.2011 |
||||||||
|
CEN |
EN 943-1:2015 Protective clothing against dangerous solid, liquid and gaseous chemicals, including liquid and solid aerosols — Part 1: Performance requirements for Type 1 (gas-tight) chemical protective suits |
9.9.2016 |
EN 943-1:2002 Note 2.1 |
9.9.2016 |
||||||||
|
CEN |
EN 943-2:2002 Protective clothing against liquid and gaseous chemicals, including liquid aerosols and solid particles — Part 2: Performance requirements for ‘gas-tight’ (Type 1) chemical protective suits for emergency teams (ET) |
10.8.2002 |
|
|
||||||||
|
CEN |
EN 958:2017 Mountaineering equipment — Energy absorbing systems for use in klettersteig (via ferrata) climbing — Safety requirements and test methods |
13.10.2017 |
EN 958:2006+A1:2010 Note 2.1 |
13.10.2017 |
||||||||
|
CEN |
EN 960:2006 Headforms for use in the testing of protective helmets |
21.12.2006 |
EN 960:1994 Note 2.1 |
31.12.2006 |
||||||||
|
CEN |
EN 966:2012+A1:2012 Helmets for airborne sports |
20.12.2012 |
EN 966:2012 Note 2.1 |
30.4.2013 |
||||||||
|
CEN |
EN 1073-1:1998 Protective clothing against radioactive contamination — Part 1: Requirements and test methods for ventilated protective clothing against particulate radioactivate contamination |
6.11.1998 |
|
|
||||||||
|
CEN |
EN 1073-2:2002 Protective clothing against radioactive contamination — Part 2: Requirements and test methods for non-ventilated protective clothing against particulate radioactive contamination |
28.8.2003 |
|
|
||||||||
|
CEN |
EN 1077:2007 Helmets for alpine skiers and snowboarders |
8.3.2008 |
EN 1077:1996 Note 2.1 |
8.3.2008 |
||||||||
|
CEN |
EN 1078:2012+A1:2012 Helmets for pedal cyclists and for users of skateboards and roller skates |
20.12.2012 |
EN 1078:2012 Note 2.1 |
30.4.2013 |
||||||||
|
CEN |
EN 1080:2013 Impact protection helmets for young children |
28.6.2013 |
EN 1080:1997 Note 2.1 |
31.8.2013 |
||||||||
|
CEN |
EN 1082-1:1996 Protective clothing — Gloves and arm guards protecting against cuts and stabs by hand knives — Part 1: Chain mail gloves and arm guards |
14.6.1997 |
|
|
||||||||
|
CEN |
EN 1082-2:2000 Protective clothing — Gloves and arm guards protecting against cuts and stabs by hand knives — Part 2: Gloves and arm guards made of material other than chain mail |
21.12.2001 |
|
|
||||||||
|
CEN |
EN 1082-3:2000 Protective clothing — Gloves and arm guards protecting against cuts and stabs by hand knives — Part 3: Impact cut test for fabric, leather and other materials |
21.12.2001 |
|
|
||||||||
|
CEN |
EN 1146:2005 Respiratory protective devices — Self-contained open-circuit compressed air breathing apparatus incorporating a hood for escape — Requirements, testing, marking |
19.4.2006 |
EN 1146:1997 Note 2.1 |
30.4.2006 |
||||||||
|
CEN |
EN 1149-1:2006 Protective clothing — Electrostatic properties — Part 1: Test method for measurement of surface resistivity |
21.12.2006 |
EN 1149-1:1995 Note 2.1 |
31.12.2006 |
||||||||
|
CEN |
EN 1149-2:1997 Protective clothing — Electrostatic properties — Part 2: Test method for measurement of the electrical resistance through a material (vertical resistance) |
19.2.1998 |
|
|
||||||||
|
CEN |
EN 1149-3:2004 Protective clothing — Electrostatic properties — Part 3: Test methods for measurement of charge decay |
6.10.2005 |
|
|
||||||||
|
CEN |
EN 1149-5:2008 Protective clothing — Electrostatic properties — Part 5: Material performance and design requirements |
20.6.2008 |
|
|
||||||||
|
CEN |
EN 1150:1999 Protective clothing — Visibility clothing for non-professional use — Test methods and requirements |
4.6.1999 |
|
|
||||||||
|
CEN |
EN 1385:2012 Helmets for canoeing and white water sports |
20.12.2012 |
EN 1385:1997 Note 2.1 |
30.4.2013 |
||||||||
|
CEN |
EN 1486:2007 Protective clothing for fire-fighters — Test methods and requirements for reflective clothing for specialised fire-fighting |
8.3.2008 |
EN 1486:1996 Note 2.1 |
30.4.2008 |
||||||||
|
CEN |
EN 1497:2007 Personal fall protection equipment — Rescue harnesses |
8.3.2008 |
|
|
||||||||
|
CEN |
EN 1621-1:2012 Motorcyclists' protective clothing against mechanical impact — Part 1: Motorcyclists' limb joint impact protectors — Requirements and test methods |
13.3.2013 |
EN 1621-1:1997 Note 2.1 |
30.6.2013 |
||||||||
|
CEN |
EN 1621-2:2014 Motorcyclists' protective clothing against mechanical impact — Part 2: Motorcyclists' back protectors — Requirements and test methods |
12.12.2014 |
EN 1621-2:2003 Note 2.1 |
31.12.2014 |
||||||||
|
CEN |
EN 1731:2006 Personal eye protection — Mesh eye and face protectors |
23.11.2007 |
EN 1731:1997 Note 2.1 |
23.11.2007 |
||||||||
|
CEN |
EN 1809:2014+A1:2016 Diving equipment — Buoyancy compensators — Functional and safety requirements, test methods |
9.9.2016 |
EN 1809:2014 Note 2.1 |
30.9.2016 |
||||||||
|
CEN |
EN 1827:1999+A1:2009 Respiratory protective devices — Half masks without inhalation valves and with separable filters to protect against gases or gases and particles or particles only — Requirements, testing, marking |
6.5.2010 |
EN 1827:1999 Note 2.1 |
6.5.2010 |
||||||||
|
CEN |
EN 1868:1997 Personal protective equipment against falls from a height — List of equivalent terms |
18.10.1997 |
|
|
||||||||
|
CEN |
EN 1891:1998 Personal protective equipment for the prevention of falls from a height — Low stretch kernmantel ropes |
6.11.1998 |
|
|
||||||||
|
CEN |
EN 1938:2010 Personal eye protection — Goggles for motorcycle and moped users |
9.7.2011 |
EN 1938:1998 Note 2.1 |
9.7.2011 |
||||||||
|
CEN |
EN ISO 4869-2:1995 Acoustics — Hearing protectors — Part 2: Estimation of effective A-weighted sound pressure levels when hearing protectors are worn (ISO 4869-2:1994) |
15.5.1996 |
|
|
||||||||
|
|
EN ISO 4869-2:1995/AC:2007 |
|
|
|
||||||||
|
CEN |
EN ISO 4869-3:2007 Acoustics — Hearing protectors — Part 3: Measurement of insertion loss of ear-muff type protectors using an acoustic test fixture (ISO 4869-3:2007) |
8.3.2008 |
EN 24869-3:1993 Note 2.1 |
8.3.2008 |
||||||||
|
CEN |
EN ISO 6529:2001 Protective clothing — Protection against chemicals — Determination of resistance of protective clothing materials to permeation by liquids and gases (ISO 6529:2001) |
6.10.2005 |
EN 369:1993 Note 2.1 |
6.10.2005 |
||||||||
|
CEN |
EN ISO 6530:2005 Protective clothing — Protection against liquid chemicals — Test method for resistance of materials to penetration by liquids (ISO 6530:2005) |
6.10.2005 |
EN 368:1992 Note 2.1 |
6.10.2005 |
||||||||
|
CEN |
EN ISO 6942:2002 Protective clothing — Protection against heat and fire — Method of test: Evaluation of materials and material assemblies when exposed to a source of radiant heat (ISO 6942:2002) |
28.8.2003 |
EN 366:1993 Note 2.1 |
28.8.2003 |
||||||||
|
CEN |
EN ISO 9151:2016 Protective clothing against heat and flame — Determination of heat transmission on exposure to flame (ISO 9151:2016, Corrected version 2017-03) |
12.4.2017 |
EN 367:1992 Note 2.1 |
30.6.2017 |
||||||||
|
CEN |
EN ISO 9185:2007 Protective clothing — Assessment of resistance of materials to molten metal splash (ISO 9185:2007) |
8.3.2008 |
EN 373:1993 Note 2.1 |
8.3.2008 |
||||||||
|
CEN |
EN ISO 10256:2003 Head and face protection for use in ice hockey (ISO 10256:2003) |
6.10.2005 |
EN 967:1996 Note 2.1 |
6.10.2005 |
||||||||
|
CEN |
EN ISO 10819:2013 Mechanical vibration and shock — Hand-arm vibration — Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand (ISO 10819:2013) |
13.12.2013 |
EN ISO 10819:1996 Note 2.1 |
13.12.2013 |
||||||||
|
CEN |
EN ISO 10862:2009 Small craft — Quick release system for trapeze harness (ISO 10862:2009) |
6.5.2010 |
|
|
||||||||
|
CEN |
EN ISO 11611:2015 Protective clothing for use in welding and allied processes (ISO 11611:2015) |
11.12.2015 |
EN ISO 11611:2007 Note 2.1 |
31.1.2016 |
||||||||
|
CEN |
EN ISO 11612:2015 Protective clothing — Clothing to protect against heat and flame — Minimum performance requirements (ISO 11612:2015) |
11.12.2015 |
EN ISO 11612:2008 Note 2.1 |
31.1.2016 |
||||||||
|
CEN |
EN 12021:2014 Respiratory equipment — Compressed gases for breathing apparatus |
12.12.2014 |
|
|
||||||||
|
CEN |
EN 12083:1998 Respiratory protective devices — Filters with breathing hoses, (Non-mask mounted filters) — Particle filters, gas filters, and combined filters — Requirements, testing, marking |
4.7.2000 |
|
|
||||||||
|
|
EN 12083:1998/AC:2000 |
|
|
|
||||||||
|
CEN |
EN ISO 12127-1:2015 Clothing for protection against heat and flame — Determination of contact heat transmission through protective clothing or constituent materials — Part 1: Contact heat produced by heating cylinder (ISO 12127-1:2015) |
9.9.2016 |
EN 702:1994 Note 2.1 |
9.9.2016 |
||||||||
|
CEN |
EN ISO 12127-2:2007 Clothing for protection against heat and flame — Determination of contact heat transmission through protective clothing or constituent materials — Part 2: Test method using contact heat produced by dropping small cylinders (ISO 12127-2:2007) |
8.3.2008 |
|
|
||||||||
|
CEN |
EN 12270:2013 Mountaineering equipment — Chocks — Safety requirements and test methods |
11.4.2014 |
EN 12270:1998 Note 2.1 |
31.5.2014 |
||||||||
|
CEN |
EN 12275:2013 Mountaineering equipment — Connectors — Safety requirements and test methods |
13.12.2013 |
EN 12275:1998 Note 2.1 |
13.12.2013 |
||||||||
|
CEN |
EN 12276:2013 Mountaineering equipment — Frictional anchors — Safety requirements and test methods |
11.4.2014 |
EN 12276:1998 Note 2.1 |
31.5.2014 |
||||||||
|
CEN |
EN 12277:2015 Mountaineering equipment — Harnesses — Safety requirements and test methods |
12.4.2017 |
EN 12277:2007 Note 2.1 |
31.5.2017 |
||||||||
|
CEN |
EN 12278:2007 Montaineering equipment — Pulleys — Safety requirements and test methods |
23.11.2007 |
EN 12278:1998 Note 2.1 |
30.11.2007 |
||||||||
|
CEN |
EN ISO 12311:2013 Personal protective equipment — Test methods for sunglasses and related eyewear (ISO 12311:2013, Corrected version 2014-08-15) |
13.12.2013 |
|
|
||||||||
|
CEN |
EN ISO 12312-1:2013 Eye and face protection — Sunglasses and related eyewear — Part 1: Sunglasses for general use (ISO 12312-1:2013) |
13.12.2013 |
EN 1836:2005+A1:2007 Note 2.3 |
28.2.2015 |
||||||||
|
|
EN ISO 12312-1:2013/A1:2015 |
This is the first publication |
Note 3 |
The date of this publication |
||||||||
|
CEN |
EN ISO 12312-2:2015 Eye and face protection — Sunglasses and related eyewear — Part 2: Filters for direct observation of the sun (ISO 12312-2:2015) |
11.12.2015 |
|
|
||||||||
|
CEN |
EN ISO 12401:2009 Small craft — Deck safety harness and safety line — Safety requirements and test methods (ISO 12401:2009) |
6.5.2010 |
EN 1095:1998 Note 2.1 |
6.5.2010 |
||||||||
|
CEN |
EN ISO 12402-2:2006 Personal flotation devices — Part 2: Lifejackets, performance level 275 — Safety requirements (ISO 12402-2:2006) |
21.12.2006 |
EN 399:1993 Note 2.1 |
31.3.2007 |
||||||||
|
|
EN ISO 12402-2:2006/A1:2010 |
9.7.2011 |
Note 3 |
9.7.2011 |
||||||||
|
CEN |
EN ISO 12402-3:2006 Personal flotation devices — Part 3: Lifejackets, performance level 150 — Safety requirements (ISO 12402-3:2006) |
21.12.2006 |
EN 396:1993 Note 2.1 |
31.3.2007 |
||||||||
|
|
EN ISO 12402-3:2006/A1:2010 |
9.7.2011 |
Note 3 |
9.7.2011 |
||||||||
|
CEN |
EN ISO 12402-4:2006 Personal flotation devices — Part 4: Lifejackets, performance level 100 — Safety requirements (ISO 12402-4:2006) |
21.12.2006 |
EN 395:1993 Note 2.1 |
31.3.2007 |
||||||||
|
|
EN ISO 12402-4:2006/A1:2010 |
9.7.2011 |
Note 3 |
9.7.2011 |
||||||||
|
CEN |
EN ISO 12402-5:2006 Personal flotation devices — Part 5: Buoyancy aids (level 50) — Safety requirements (ISO 12402-5:2006) |
21.12.2006 |
EN 393:1993 Note 2.1 |
31.3.2007 |
||||||||
|
|
EN ISO 12402-5:2006/AC:2006 |
|
|
|
||||||||
|
|
EN ISO 12402-5:2006/A1:2010 |
9.7.2011 |
Note 3 |
9.7.2011 |
||||||||
|
CEN |
EN ISO 12402-6:2006 Personal flotation devices — Part 6: Special purpose lifejackets and buoyancy aids — Safety requirements and additional test methods (ISO 12402-6:2006) |
21.12.2006 |
|
|
||||||||
|
|
EN ISO 12402-6:2006/A1:2010 |
9.7.2011 |
Note 3 |
9.7.2011 |
||||||||
|
CEN |
EN ISO 12402-8:2006 Personal flotation devices — Part 8: Accessories — Safety requirements and test methods (ISO 12402-8:2006) |
2.8.2006 |
EN 394:1993 Note 2.1 |
31.8.2006 |
||||||||
|
|
EN ISO 12402-8:2006/A1:2011 |
11.11.2011 |
Note 3 |
11.11.2011 |
||||||||
|
CEN |
EN ISO 12402-9:2006 Personal flotation devices — Part 9: Test methods (ISO 12402-9:2006) |
21.12.2006 |
|
|
||||||||
|
|
EN ISO 12402-9:2006/A1:2011 |
11.11.2011 |
Note 3 |
11.11.2011 |
||||||||
|
CEN |
EN ISO 12402-10:2006 Personal flotation devices — Part 10: Selection and application of personal flotation devices and other relevant devices (ISO 12402-10:2006) |
2.8.2006 |
|
|
||||||||
|
CEN |
EN 12477:2001 Protective gloves for welders |
10.8.2002 |
|
|
||||||||
|
|
EN 12477:2001/A1:2005 |
6.10.2005 |
Note 3 |
31.12.2005 |
||||||||
|
CEN |
EN 12492:2012 Mountaineering equipment — Helmets for mountaineers — Safety requirements and test methods |
20.12.2012 |
EN 12492:2000 Note 2.1 |
30.4.2013 |
||||||||
|
CEN |
EN 12628:1999 Diving accessories — Combined buoyancy and rescue devices — Functional and safety requirements, test methods |
4.7.2000 |
|
|
||||||||
|
|
EN 12628:1999/AC:2000 |
|
|
|
||||||||
|
CEN |
EN 12841:2006 Personal fall protection equipment — Rope access systems — Rope adjustment devices |
21.12.2006 |
|
|
||||||||
|
CEN |
EN 12941:1998 Respiratory protective devices — Powered filtering devices incorporating a helmet or a hood — Requirements, testing, marking |
4.6.1999 |
EN 146:1991 Note 2.1 |
4.6.1999 |
||||||||
|
|
EN 12941:1998/A1:2003 |
6.10.2005 |
Note 3 |
6.10.2005 |
||||||||
|
|
EN 12941:1998/A2:2008 |
5.6.2009 |
Note 3 |
5.6.2009 |
||||||||
|
CEN |
EN 12942:1998 Respiratory protective devices — Power assisted filtering devices incorporating full face masks, half masks or quarter masks — Requirements, testing, marking |
4.6.1999 |
EN 147:1991 Note 2.1 |
4.6.1999 |
||||||||
|
|
EN 12942:1998/A1:2002 |
28.8.2003 |
Note 3 |
28.8.2003 |
||||||||
|
|
EN 12942:1998/A2:2008 |
5.6.2009 |
Note 3 |
5.6.2009 |
||||||||
|
CEN |
EN 13034:2005+A1:2009 Protective clothing against liquid chemicals — Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals (Type 6 and Type PB [6] equipment) |
6.5.2010 |
EN 13034:2005 Note 2.1 |
6.5.2010 |
||||||||
|
CEN |
EN 13061:2009 Protective clothing — Shin guards for association football players — Requirements and test methods |
6.5.2010 |
EN 13061:2001 Note 2.1 |
6.5.2010 |
||||||||
|
CEN |
EN 13087-1:2000 Protective helmets — Test methods — Part 1: Conditions and conditioning |
10.8.2002 |
|
|
||||||||
|
|
EN 13087-1:2000/A1:2001 |
10.8.2002 |
Note 3 |
10.8.2002 |
||||||||
|
CEN |
EN 13087-2:2012 Protective helmets — Test methods — Part 2: Shock absorption |
20.12.2012 |
EN 13087-2:2000 Note 2.1 |
30.4.2013 |
||||||||
|
CEN |
EN 13087-3:2000 Protective helmets — Test methods — Part 3: Resistance to penetration |
10.8.2002 |
|
|
||||||||
|
|
EN 13087-3:2000/A1:2001 |
10.8.2002 |
Note 3 |
10.8.2002 |
||||||||
|
CEN |
EN 13087-4:2012 Protective helmets — Test methods — Part 4: Retention system effectiveness |
20.12.2012 |
EN 13087-4:2000 Note 2.1 |
30.4.2013 |
||||||||
|
CEN |
EN 13087-5:2012 Protective helmets — Test methods — Part 5: Retention system strength |
20.12.2012 |
EN 13087-5:2000 Note 2.1 |
30.4.2013 |
||||||||
|
CEN |
EN 13087-6:2012 Protective helmets — Test methods — Part 6: Field of vision |
20.12.2012 |
EN 13087-6:2000 Note 2.1 |
30.4.2013 |
||||||||
|
CEN |
EN 13087-7:2000 Protective helmets — Test methods — Part 7: Flame resistance |
10.8.2002 |
|
|
||||||||
|
|
EN 13087-7:2000/A1:2001 |
10.8.2002 |
Note 3 |
10.8.2002 |
||||||||
|
CEN |
EN 13087-8:2000 Protective helmets — Test methods — Part 8: Electrical properties |
21.12.2001 |
|
|
||||||||
|
|
EN 13087-8:2000/A1:2005 |
6.10.2005 |
Note 3 |
6.10.2005 |
||||||||
|
CEN |
EN 13087-10:2012 Protective helmets — Test methods — Part 10: Resistance to radiant heat |
20.12.2012 |
EN 13087-10:2000 Note 2.1 |
30.4.2013 |
||||||||
|
CEN |
EN 13089:2011 Mountaineering equipment — Ice-tools — Safety requirements and test methods |
9.7.2011 |
|
|
||||||||
|
CEN |
EN 13138-1:2008 Buoyant aids for swimming instruction — Part 1: Safety requirements and test methods for buoyant aids to be worn |
5.6.2009 |
EN 13138-1:2003 Note 2.1 |
5.6.2009 |
||||||||
|
CEN |
EN 13158:2009 Protective clothing — Protective jackets, body and shoulder protectors for equestrian use: For horse riders and those working with horses, and for horse drivers — Requirements and test methods |
6.5.2010 |
EN 13158:2000 Note 2.1 |
6.5.2010 |
||||||||
|
CEN |
EN 13178:2000 Personal eye-protection — Eye protectors for snowmobile users |
21.12.2001 |
|
|
||||||||
|
CEN |
EN 13274-1:2001 Respiratory protective devices — Methods of test — Part 1: Determination of inward leakage and total inward leakage |
21.12.2001 |
|
|
||||||||
|
CEN |
EN 13274-2:2001 Respiratory protective devices — Methods of test — Part 2: Practical performance tests |
21.12.2001 |
|
|
||||||||
|
CEN |
EN 13274-3:2001 Respiratory protective devices — Methods of test — Part 3: Determination of breathing resistance |
10.8.2002 |
|
|
||||||||
|
CEN |
EN 13274-4:2001 Respiratory protective devices — Methods of test — Part 4: Flame tests |
10.8.2002 |
|
|
||||||||
|
CEN |
EN 13274-5:2001 Respiratory protective devices — Methods of test — Part 5: Climatic conditions |
21.12.2001 |
|
|
||||||||
|
CEN |
EN 13274-6:2001 Respiratory protective devices — Methods of test — Part 6: Determination of carbon dioxide content of the inhalation air |
10.8.2002 |
|
|
||||||||
|
CEN |
EN 13274-7:2008 Respiratory protective devices — Methods of test — Part 7: Determination of particle filter penetration |
20.6.2008 |
EN 13274-7:2002 Note 2.1 |
31.7.2008 |
||||||||
|
CEN |
EN 13274-8:2002 Respiratory protective devices — Methods of test — Part 8: Determination of dolomite dust clogging |
28.8.2003 |
|
|
||||||||
|
CEN |
EN 13277-1:2000 Protective equipment for martial arts — Part 1: General requirements and test methods |
24.2.2001 |
|
|
||||||||
|
CEN |
EN 13277-2:2000 Protective equipment for martial arts — Part 2: Additional requirements and test methods for instep protectors, shin protectors and forearm protectors |
24.2.2001 |
|
|
||||||||
|
CEN |
EN 13277-3:2013 Protective equipment for martial arts — Part 3: Additional requirements and test methods for trunk protectors |
11.4.2014 |
EN 13277-3:2000 Note 2.1 |
30.6.2014 |
||||||||
|
CEN |
EN 13277-4:2001 Protective equipment for martial arts — Part 4: Additional requirements and test methods for head protectors |
10.8.2002 |
|
|
||||||||
|
|
EN 13277-4:2001/A1:2007 |
23.11.2007 |
Note 3 |
31.12.2007 |
||||||||
|
CEN |
EN 13277-5:2002 Protective equipment for martial arts — Part 5: Additional requirements and test methods for genital protectors and abdominal protectors |
10.8.2002 |
|
|
||||||||
|
CEN |
EN 13277-6:2003 Protective equipment for martial arts — Part 6: Additional requirements and test methods for breast protectors for females |
21.2.2004 |
|
|
||||||||
|
CEN |
EN 13277-7:2009 Protective equipment for martial arts — Part 7: Additional requirements and test methods for hand and foot protectors |
6.5.2010 |
|
|
||||||||
|
CEN |
EN ISO 13287:2012 Personal protective equipment — Footwear — Test method for slip resistance (ISO 13287:2012) |
13.3.2013 |
EN ISO 13287:2007 Note 2.1 |
30.4.2013 |
||||||||
|
CEN |
EN 13356:2001 Visibility accessories for non-professional use — Test methods and requirements |
21.12.2001 |
|
|
||||||||
|
CEN |
EN 13484:2012 Helmets for users of luges |
20.12.2012 |
EN 13484:2001 Note 2.1 |
30.4.2013 |
||||||||
|
CEN |
EN ISO 13506-1:2017 Protective clothing against heat and flame — Part 1: Test method for complete garments — Measurement of transferred energy using an instrumented manikin (ISO 13506-1:2017) |
This is the first publication |
|
|
||||||||
|
CEN |
EN 13546:2002+A1:2007 Protective clothing — Hand, arm, chest, abdomen, leg, foot and genital protectors for field hockey goal keepers, and shin protectors for field players — Requirements and test methods |
23.11.2007 |
EN 13546:2002 Note 2.1 |
31.12.2007 |
||||||||
|
CEN |
EN 13567:2002+A1:2007 Protective clothing — Hand, arm, chest, abdomen, leg, genital and face protectors for fencers — Requirements and test methods |
23.11.2007 |
EN 13567:2002 Note 2.1 |
31.12.2007 |
||||||||
|
CEN |
EN 13594:2015 Protective gloves for motorcycle riders — Requirements and test methods |
11.12.2015 |
EN 13594:2002 Note 2.1 |
31.8.2017 |
||||||||
|
CEN |
EN 13595-1:2002 Protective clothing for professional motorcycle riders — Jackets, trousers and one piece or divided suits — Part 1: General requirements |
28.8.2003 |
|
|
||||||||
|
CEN |
EN 13595-2:2002 Protective clothing for professional motorcycle riders — Jackets, trousers and one-piece or divided suits — Part 2: Test method for determination of impact abrasion resistance |
28.8.2003 |
|
|
||||||||
|
CEN |
EN 13595-3:2002 Protective clothing for professional motorcycle riders — Jackets, trousers and one-piece or divided suits — Part 3: Test method for determination of burst strength |
28.8.2003 |
|
|
||||||||
|
CEN |
EN 13595-4:2002 Protective clothing for professional motorcycle riders — Jackets, trousers and one-piece or divided suits — Part 4: Test method for determination of impact cut resistance |
28.8.2003 |
|
|
||||||||
|
CEN |
EN 13634:2010 Protective footwear for motorcycle riders — Requirements and test methods |
9.7.2011 |
EN 13634:2002 Note 2.1 |
9.7.2011 |
||||||||
|
CEN |
EN ISO 13688:2013 Protective clothing — General requirements (ISO 13688:2013) |
13.12.2013 |
EN 340:2003 Note 2.1 |
31.1.2014 |
||||||||
|
CEN |
EN 13781:2012 Protective helmets for drivers and passengers of snowmobiles and bobsleighs |
20.12.2012 |
EN 13781:2001 Note 2.1 |
30.4.2013 |
||||||||
|
CEN |
EN 13794:2002 Respiratory protective devices — Self-contained closed-circuit breathing apparatus for escape — Requirements, testing, marking |
28.8.2003 |
EN 400:1993 EN 401:1993 EN 1061:1996 Note 2.1 |
28.8.2003 |
||||||||
|
CEN |
EN 13819-1:2002 Hearing protectors — Testing — Part 1: Physical test methods |
28.8.2003 |
|
|
||||||||
|
CEN |
EN 13819-2:2002 Hearing protectors — Testing — Part 2: Acoustic test methods |
28.8.2003 |
|
|
||||||||
|
CEN |
EN 13832-1:2006 Footwear protecting against chemicals — Part 1: Terminology and test methods |
21.12.2006 |
|
|
||||||||
|
CEN |
EN 13832-2:2006 Footwear protecting against chemicals — Part 2: Requirements for footwear resistant to chemicals under laboratory conditions |
21.12.2006 |
|
|
||||||||
|
CEN |
EN 13832-3:2006 Footwear protecting against chemicals — Part 3: Requirements for footwear highly resistant to chemicals under laboratory conditions |
21.12.2006 |
|
|
||||||||
|
CEN |
EN 13911:2017 Protective clothing for firefighters — Requirements and test methods for fire hoods for firefighters |
This is the first publication |
EN 13911:2004 Note 2.1 |
28.2.2018 |
||||||||
|
CEN |
EN 13921:2007 Personal protective equipment — Ergonomic principles |
23.11.2007 |
|
|
||||||||
|
CEN |
EN 13949:2003 Respiratory equipment — Open-circuit self-contained diving apparatus for use with compressed Nitrox and oxygen — Requirements, testing, marking |
21.2.2004 |
|
|
||||||||
|
CEN |
EN ISO 13982-1:2004 Protective clothing for use against solid particulates — Part 1: Performance requirements for chemical protective clothing providing protection to the full body against airborne solid particulates (type 5 clothing) (ISO 13982-1:2004) |
6.10.2005 |
|
|
||||||||
|
|
EN ISO 13982-1:2004/A1:2010 |
9.7.2011 |
Note 3 |
9.7.2011 |
||||||||
|
CEN |
EN ISO 13982-2:2004 Protective clothing for use against solid particulates — Part 2: Test method of determination of inward leakage of aerosols of fine particles into suits (ISO 13982-2:2004) |
6.10.2005 |
|
|
||||||||
|
CEN |
EN ISO 13995:2000 Protective clothing — Mechanical properties — Test method for the determination of the resistance to puncture and dynamic tearing of materials (ISO 13995:2000) |
6.10.2005 |
|
|
||||||||
|
CEN |
EN ISO 13997:1999 Protective clothing — Mechanical properties — Determination of resistance to cutting by sharp objects (ISO 13997:1999) |
4.7.2000 |
|
|
||||||||
|
|
EN ISO 13997:1999/AC:2000 |
|
|
|
||||||||
|
CEN |
EN ISO 13998:2003 Protective clothing — Aprons, trousers and vests protecting against cuts and stabs by hand knives (ISO 13998:2003) |
28.8.2003 |
EN 412:1993 Note 2.1 |
28.8.2003 |
||||||||
|
CEN |
EN 14021:2003 Stone shields for off-road motorcycling suited to protect riders against stones and debris — Requirements and test methods |
6.10.2005 |
|
|
||||||||
|
CEN |
EN 14052:2012+A1:2012 High performance industrial helmets |
20.12.2012 |
EN 14052:2012 Note 2.1 |
30.4.2013 |
||||||||
|
CEN |
EN 14058:2004 Protective clothing — Garments for protection against cool environments |
6.10.2005 |
|
|
||||||||
|
CEN |
EN ISO 14116:2015 Protective clothing — Protection against flame — Limited flame spread materials, material assemblies and clothing (ISO 14116:2015) |
11.12.2015 |
EN ISO 14116:2008 Note 2.1 |
31.1.2016 |
||||||||
|
CEN |
EN 14120:2003+A1:2007 Protective clothing — Wrist, palm, knee and elbow protectors for users of roller sports equipment — Requirements and test methods |
23.11.2007 |
EN 14120:2003 Note 2.1 |
31.12.2007 |
||||||||
|
CEN |
EN 14126:2003 Protective clothing — Performance requirements and tests methods for protective clothing against infective agents |
6.10.2005 |
|
|
||||||||
|
|
EN 14126:2003/AC:2004 |
|
|
|
||||||||
|
CEN |
EN 14143:2013 Respiratory equipment — Self-contained re-breathing diving apparatus |
13.12.2013 |
EN 14143:2003 Note 2.1 |
31.1.2014 |
||||||||
|
CEN |
EN 14225-1:2005 Diving suits — Part 1: Wet suits — Requirements and test methods |
6.10.2005 |
|
|
||||||||
|
CEN |
EN 14225-2:2005 Diving suits — Part 2: Dry suits — Requirements and test methods |
6.10.2005 |
|
|
||||||||
|
CEN |
EN 14225-3:2005 Diving suits — Part 3: Actively heated or cooled suits (systems) — Requirements and test methods |
6.10.2005 |
|
|
||||||||
|
CEN |
EN 14225-4:2005 Diving suits — Part 4: One atmosphere suits (ADS) — Human factors requirements and test methods |
6.10.2005 |
|
|
||||||||
|
CEN |
EN 14325:2004 Protective clothing against chemicals — Test methods and performance classification of chemical protective clothing materials, seams, joins and assemblages |
6.10.2005 |
|
|
||||||||
|
CEN |
EN 14328:2005 Protective clothing — Gloves and armguards protecting against cuts by powered knives — Requirements and test methods |
6.10.2005 |
|
|
||||||||
|
CEN |
EN 14360:2004 Protective clothing against rain — Test method for ready made garments — Impact from above with high energy droplets |
6.10.2005 |
|
|
||||||||
|
CEN |
EN 14387:2004+A1:2008 Respiratory protective devices — Gas filter(s) and combined filter(s) — Requirements, testing, marking |
20.6.2008 |
EN 14387:2004 Note 2.1 |
31.7.2008 |
||||||||
|
CEN |
EN 14404:2004+A1:2010 Personal protective equipment — Knee protectors for work in the kneeling position |
6.5.2010 |
EN 14404:2004 Note 2.1 |
31.7.2010 |
||||||||
|
CEN |
EN 14435:2004 Respiratory protective devices — Self-contained open-circuit compressed air breathing apparatus with half mask designed to be used with positive pressure only — Requirements, testing, marking |
6.10.2005 |
|
|
||||||||
|
CEN |
EN 14458:2004 Personal eye-equipment — Faceshields and visors for use with firefighters' and high performance industrial safety helmets used by firefighters, ambulance and emergency services |
6.10.2005 |
|
|
||||||||
|
CEN |
EN ISO 14460:1999 Protective clothing for automobile racing drivers — Protection against heat and flame — Performance requirements and test methods (ISO 14460:1999) |
16.3.2000 |
|
|
||||||||
|
|
EN ISO 14460:1999/AC:1999 |
|
|
|
||||||||
|
|
EN ISO 14460:1999/A1:2002 |
10.8.2002 |
Note 3 |
30.9.2002 |
||||||||
|
CEN |
EN 14529:2005 Respiratory protective devices — Self-contained open-circuit compressed air breathing apparatus with half mask designed to include a positive pressure lung governed demand valve for escape purposes only |
19.4.2006 |
|
|
||||||||
|
CEN |
EN 14593-1:2005 Respiratory protective devices — Compressed air line breathing apparatus with demand valve — Part 1: Apparatus with a full face mask — Requirements, testing, marking |
6.10.2005 |
EN 139:1994 Note 2.1 |
2.12.2005 |
||||||||
|
CEN |
EN 14593-2:2005 Respiratory protective devices — Compressed air line breathing apparatus with demand valve — Part 2: Apparatus with a half mask at positive pressure — Requirements, testing, marking |
6.10.2005 |
EN 139:1994 Note 2.1 |
2.12.2005 |
||||||||
|
|
EN 14593-2:2005/AC:2005 |
|
|
|
||||||||
|
CEN |
EN 14594:2005 Respiratory protective devices — Continuous flow compressed air line breathing apparatus — Requirements, testing, marking |
6.10.2005 |
EN 139:1994 EN 270:1994 EN 271:1995 EN 1835:1999 EN 12419:1999 Note 2.1 |
2.12.2005 |
||||||||
|
|
EN 14594:2005/AC:2005 |
|
|
|
||||||||
|
CEN |
EN 14605:2005+A1:2009 Protective clothing against liquid chemicals — performance requirements for clothing with liquid-tight (Type 3) or spray-tight (Type 4) connections, including items providing protection to parts of the body only (Types PB [3] and PB [4]) |
6.5.2010 |
EN 14605:2005 Note 2.1 |
6.5.2010 |
||||||||
|
CEN |
EN 14786:2006 Protective clothing — Determination of resistance to penetration by sprayed liquid chemicals, emulsions and dispersions — Atomizer test |
21.12.2006 |
|
|
||||||||
|
CEN |
EN ISO 14877:2002 Protective clothing for abrasive blasting operations using granular abrasives (ISO 14877:2002) |
28.8.2003 |
|
|
||||||||
|
CEN |
EN ISO 15025:2002 Protective clothing — Protection against heat and flame — Method of test for limited flame spread (ISO 15025:2000) |
28.8.2003 |
EN 532:1994 Note 2.1 |
28.8.2003 |
||||||||
|
CEN |
EN ISO 15027-1:2012 Immersion suits — Part 1: Constant wear suits, requirements including safety (ISO 15027-1:2012) |
13.3.2013 |
EN ISO 15027-1:2002 Note 2.1 |
31.5.2013 |
||||||||
|
CEN |
EN ISO 15027-2:2012 Immersion suits — Part 2: Abandonment suits, requirements including safety (ISO 15027-2:2012) |
13.3.2013 |
EN ISO 15027-2:2002 Note 2.1 |
31.5.2013 |
||||||||
|
CEN |
EN ISO 15027-3:2012 Immersion suits — Part 3: Test methods (ISO 15027-3:2012) |
13.3.2013 |
EN ISO 15027-3:2002 Note 2.1 |
31.5.2013 |
||||||||
|
CEN |
EN 15090:2012 Footwear for firefighters |
20.12.2012 |
EN 15090:2006 Note 2.1 |
30.4.2013 |
||||||||
|
CEN |
EN 15151-1:2012 Mountaineering equipment — Braking devices — Part 1: Braking devices with manually assisted locking, safety requirements and test methods |
20.12.2012 |
|
|
||||||||
|
CEN |
EN 15333-1:2008 Respiratory equipment — Open-circuit umbilical supplied compressed gas diving apparatus — Part 1: Demand apparatus |
20.6.2008 |
|
|
||||||||
|
|
EN 15333-1:2008/AC:2009 |
|
|
|
||||||||
|
CEN |
EN 15333-2:2009 Respiratory equipment — Open-circuit umbilical supplied compressed gas diving apparatus — Part 2: Free flow apparatus |
6.5.2010 |
|
|
||||||||
|
CEN |
EN 15613:2008 Knee and elbow protectors for indoor sports — Safety requirements and test methods |
5.6.2009 |
|
|
||||||||
|
CEN |
EN 15614:2007 Protective clothing for firefighters — Laboratory test methods and performance requirements for wildland clothing |
23.11.2007 |
|
|
||||||||
|
CEN |
EN ISO 15831:2004 Clothing — Physiological effects — Measurement of thermal insulation by means of a thermal manikin (ISO 15831:2004) |
6.10.2005 |
|
|
||||||||
|
CEN |
EN 16027:2011 Protective clothing — Gloves with protective effect for association football goal keepers |
16.2.2012 |
|
|
||||||||
|
CEN |
EN 16350:2014 Protective gloves — Electrostatic properties |
12.12.2014 |
|
|
||||||||
|
CEN |
EN 16473:2014 Firefighters helmets — Helmets for technical rescue |
11.12.2015 |
|
|
||||||||
|
CEN |
EN 16689:2017 Protective clothing for firefighters — Performance requirements for protective clothing for technical rescue |
13.10.2017 |
|
|
||||||||
|
CEN |
EN 16716:2017 Mountaineering equipment — Avalanche airbag systems — Safety requirements and test methods |
13.10.2017 |
|
|
||||||||
|
CEN |
EN ISO 17249:2013 Safety footwear with resistance to chain saw cutting (ISO 17249:2013) |
11.4.2014 |
EN ISO 17249:2004 Note 2.1 |
30.11.2015 |
||||||||
|
|
EN ISO 17249:2013/AC:2014 |
|
|
|
||||||||
|
CEN |
EN ISO 17491-3:2008 Protective clothing — Test methods for clothing providing protection against chemicals — Part 3: Determination of resistance to penetration by a jet of liquid (jet test) (ISO 17491-3:2008) |
28.1.2009 |
EN 463:1994 Note 2.1 |
28.2.2009 |
||||||||
|
CEN |
EN ISO 17491-4:2008 Protective clothing — Test methods for clothing providing protection against chemicals — Part 4: Determination of resistance to penetration by a spray of liquid (spray test) (ISO 17491-4:2008) |
28.1.2009 |
EN 468:1994 Note 2.1 |
28.2.2009 |
||||||||
|
CEN |
EN ISO 20344:2011 Personal protective equipment — Test methods for footwear (ISO 20344:2011) |
16.2.2012 |
EN ISO 20344:2004 Note 2.1 |
30.6.2012 |
||||||||
|
CEN |
EN ISO 20345:2011 Personal protective equipment — Safety footwear (ISO 20345:2011) |
16.2.2012 |
EN ISO 20345:2004 Note 2.1 |
30.6.2013 |
||||||||
|
CEN |
EN ISO 20346:2014 Personal protective equipment — Protective footwear (ISO 20346:2014) |
12.12.2014 |
EN ISO 20346:2004 Note 2.1 |
31.12.2014 |
||||||||
|
CEN |
EN ISO 20347:2012 Personal protective equipment — Occupational footwear (ISO 20347:2012) |
20.12.2012 |
EN ISO 20347:2004 Note 2.1 |
30.4.2013 |
||||||||
|
CEN |
EN ISO 20349-1:2017 Personal protective equipment — Footwear protecting against risks in foundries and welding — Part 1: Requirements and test methods for protection against risks in foundries (ISO 20349-1:2017) |
This is the first publication |
EN ISO 20349:2010 Note 2.1 |
23.8.2019 |
||||||||
|
CEN |
EN ISO 20349-2:2017 Personal protective equipment — Footwear protecting against risks in foundries and welding — Part 2: Requirements and test methods for protection against risks in welding and allied processes (ISO 20349-2:2017) |
This is the first publication |
EN ISO 20349:2010 Note 2.1 |
31.3.2018 |
||||||||
|
CEN |
EN ISO 20471:2013 High visibility clothing — Test methods and requirements (ISO 20471:2013, Corrected version 2013-06-01) |
28.6.2013 |
EN 471:2003+A1:2007 Note 2.1 |
30.9.2013 |
||||||||
|
|
EN ISO 20471:2013/A1:2016 |
12.4.2017 |
Note 3 |
31.5.2017 |
||||||||
|
CEN |
EN 24869-1:1992 Acoustics — Hearing protectors — Subjective method for the measurement of sound attenuation (ISO 4869-1:1990) |
16.12.1994 |
|
|
||||||||
|
Cenelec |
EN 50286:1999 Electrical insulating protective clothing for low-voltage installations |
16.3.2000 |
|
|
||||||||
|
Cenelec |
EN 50321:1999 Electrically insulating footwear for working on low voltage installations |
16.3.2000 |
|
|
||||||||
|
Cenelec |
EN 50365:2002 Electrically insulating helmets for use on low voltage installations |
10.4.2003 |
|
|
||||||||
|
Cenelec |
EN 60743:2001 Live working — Terminology for tools, equipment and devices IEC 60743:2001 |
10.4.2003 |
EN 60743:1996 Note 2.1 |
1.12.2004 |
||||||||
|
|
EN 60743:2001/A1:2008 IEC 60743:2001/A1:2008 |
9.7.2011 |
Note 3 |
9.7.2011 |
||||||||
|
Cenelec |
EN 60895:2003 Live working — Conductive clothing for use at nominal voltage up to 800 kV a.c. and ± 600 kV d.c. IEC IEC 60895:2002 (Modified) |
6.10.2005 |
EN 60895:1996 Note 2.1 |
1.7.2006 |
||||||||
|
Cenelec |
EN 60903:2003 Live working — Gloves of insulating material IEC IEC 60903:2002 (Modified) |
6.10.2005 |
EN 50237:1997 EN 60903:1992 + A11:1997 Note 2.1 |
1.7.2006 |
||||||||
|
Cenelec |
EN 60984:1992 Sleeves of insulating material for live working IEC 60984:1990 (Modified) |
4.6.1999 |
|
|
||||||||
|
|
EN 60984:1992/A11:1997 |
4.6.1999 |
Note 3 |
4.6.1999 |
||||||||
|
|
EN 60984:1992/A1:2002 IEC 60984:1990/A1:2002 |
10.4.2003 |
Note 3 |
6.10.2005 |
||||||||
|
Note 1: |
Generally the date of cessation of presumption of conformity will be the date of withdrawal (‘dow’), set by the European standardisation organisation, but attention of users of these standards is drawn to the fact that in certain exceptional cases this can be otherwise. |
|
Note 2.1: |
The new (or amended) standard has the same scope as the superseded standard. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
|
Note 2.2: |
The new standard has a broader scope than the superseded standard. On the date stated the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
|
Note 2.3: |
The new standard has a narrower scope than the superseded standard. On the date stated the (partially) superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation for those products or services that fall within the scope of the new standard. Presumption of conformity with the essential or other requirements of the relevant Union legislation for products or services that still fall within the scope of the (partially) superseded standard, but that do not fall within the scope of the new standard, is unaffected. |
|
Note 3: |
In case of amendments, the referenced standard is EN CCCCC:YYYY, its previous amendments, if any, and the new, quoted amendment. The superseded standard therefore consists of EN CCCCC:YYYY and its previous amendments, if any, but without the new quoted amendment. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
NOTE:
|
— |
Any information concerning the availability of the standards can be obtained either from the European standardisation organisations or from the national standardisation bodies the list of which is published in the Official Journal of the European Union according to Article 27 of the Regulation (EU) No 1025/2012 (2). |
|
— |
Standards are adopted by the European standardisation organisations in English (CEN and Cenelec also publish in French and German). Subsequently, the titles of the standards are translated into all other required official languages of the European Union by the national standardisation bodies. The European Commission is not responsible for the correctness of the titles which have been presented for publication in the Official Journal. |
|
— |
References to Corrigenda ‘…/AC:YYYY’ are published for information only. A Corrigendum removes printing, linguistic or similar errors from the text of a standard and may relate to one or more language versions (English, French and/or German) of a standard as adopted by a European standardisation organisation. |
|
— |
Publication of the references in the Official Journal of the European Union does not imply that the standards are available in all the official languages of the European Union. |
|
— |
This list replaces all the previous lists published in the Official Journal of the European Union. The European Commission ensures the updating of this list. |
|
— |
More information about harmonised standards and other European standards on the Internet at: http://ec.europa.eu/growth/single-market/european-standards/harmonised-standards/index_en.htm |
(1) ESO: European standardisation organisation:
|
— |
CEN: Avenue Marnix 17, 1000 Brussels, BELGIUM. Tel. +32 25500811; fax +32 25500819 (http://www.cen.eu) |
|
— |
Cenelec: Avenue Marnix 17, 1000 Brussels, BELGIUM. Tel. +32 25196871; fax +32 25196919 (http://www.cenelec.eu) |
|
— |
ETSI: 650, route des Lucioles, 06921 Sophia Antipolis, FRANCE. Tel. +33 492944200; fax +33 493654716 (http://www.etsi.eu) |
(2) OJ C 338, 27.9.2014, p. 31.
|
15.12.2017 |
EN |
Official Journal of the European Union |
C 435/41 |
Commission communication in the framework of the implementation of Regulation (EU) No 305/2011 of the European Parliament and of the Council laying down harmonised conditions for the marketing of construction products and repealing Council Directive 89/106/EEC
(Publication of titles and references of harmonised standards under Union harmonisation legislation)
(Text with EEA relevance)
(2017/C 435/03)
The provisions of Regulation (EU) No 305/2011 prevail over any conflicting provisions in the harmonised standards.
|
ESO (1) |
Reference and title of the standard (and reference document) |
Reference of superseded standard |
Date of applicability of the standard as a harmonised standard |
Date of the end of the co-existence period |
|
(1) |
(2) |
(3) |
(4) |
(5) |
|
CEN |
EN 1:1998 Flued oil stoves with vaporizing burners |
|
1.1.2008 |
1.1.2009 |
|
|
EN 1:1998/A1:2007 |
|
1.1.2008 |
1.1.2009 |
|
CEN |
EN 40-4:2005 Lighting columns — Part 4: Requirements for reinforced and prestressed concrete lighting columns |
|
1.10.2006 |
1.10.2007 |
|
|
EN 40-4:2005/AC:2006 |
|
1.1.2007 |
1.1.2007 |
|
CEN |
EN 40-5:2002 Lighting columns — Part 5: Requirements for steel lighting columns |
|
1.2.2003 |
1.2.2005 |
|
CEN |
EN 40-6:2002 Lighting columns — Part 6: Requirements for aluminium lighting columns |
|
1.2.2003 |
1.2.2005 |
|
CEN |
EN 40-7:2002 Lighting columns — Part 7: Requirements for fibre reinforced polymer composite lighting columns |
|
1.10.2003 |
1.10.2004 |
|
CEN |
EN 54-2:1997 Fire detection and fire alarm systems — Part 2: Control and indicating equipment |
|
1.1.2008 |
1.8.2009 |
|
|
EN 54-2:1997/AC:1999 |
|
1.1.2008 |
1.1.2008 |
|
|
EN 54-2:1997/A1:2006 |
|
1.1.2008 |
1.8.2009 |
|
CEN |
EN 54-3:2001 Fire detection and fire alarm systems — Part 3: Fire alarm devices — Sounders |
|
1.4.2003 |
1.6.2009 |
|
|
EN 54-3:2001/A2:2006 |
|
1.3.2007 |
1.6.2009 |
|
|
EN 54-3:2001/A1:2002 |
|
1.4.2003 |
30.6.2005 |
|
CEN |
EN 54-4:1997 Fire detection and fire alarm systems — Part 4: Power supply equipment |
|
1.10.2003 |
1.8.2009 |
|
|
EN 54-4:1997/AC:1999 |
|
1.6.2005 |
1.6.2005 |
|
|
EN 54-4:1997/A1:2002 |
|
1.10.2003 |
1.8.2009 |
|
|
EN 54-4:1997/A2:2006 |
|
1.6.2007 |
1.8.2009 |
|
CEN |
EN 54-5:2000 Fire detection and fire alarm systems — Part 5: Heat detectors — Point detectors |
|
1.4.2003 |
30.6.2005 |
|
|
EN 54-5:2000/A1:2002 |
|
1.4.2003 |
30.6.2005 |
|
CEN |
EN 54-7:2000 Fire detection and fire alarm systems — Part 7: Smoke detectors — Point detectors using scattered light, transmitted light or ionization |
|
1.4.2003 |
1.8.2009 |
|
|
EN 54-7:2000/A2:2006 |
|
1.5.2007 |
1.8.2009 |
|
|
EN 54-7:2000/A1:2002 |
|
1.4.2003 |
30.6.2005 |
|
CEN |
EN 54-10:2002 Fire detection and fire alarm systems — Part 10: Flame detectors — Point detectors |
|
1.9.2006 |
1.9.2008 |
|
|
EN 54-10:2002/A1:2005 |
|
1.9.2006 |
1.9.2008 |
|
CEN |
EN 54-11:2001 Fire detection and fire alarm systems — Part 11: Manual call points |
|
1.9.2006 |
1.9.2008 |
|
|
EN 54-11:2001/A1:2005 |
|
1.9.2006 |
1.9.2008 |
|
CEN |
EN 54-12:2015 Fire detection and fire alarm systems — Part 12: Smoke detectors — Line detectors using an optical beam |
EN 54-12:2002 |
8.4.2016 |
8.4.2019 |
|
CEN |
EN 54-16:2008 Fire detection and fire alarm systems — Part 16: Voice alarm control and indicating equipment |
|
1.1.2009 |
1.4.2011 |
|
CEN |
EN 54-17:2005 Fire detection and fire alarm systems — Part 17: Short-circuit isolators |
|
1.10.2006 |
1.12.2008 |
|
|
EN 54-17:2005/AC:2007 |
|
1.1.2009 |
1.1.2009 |
|
CEN |
EN 54-18:2005 Fire detection and fire alarm systems — Part 18: Input/output devices |
|
1.10.2006 |
1.12.2008 |
|
|
EN 54-18:2005/AC:2007 |
|
1.1.2008 |
1.1.2008 |
|
CEN |
EN 54-20:2006 Fire detection and fire alarm systems — Part 20: Aspirating smoke detectors |
|
1.4.2007 |
1.7.2009 |
|
|
EN 54-20:2006/AC:2008 |
|
1.8.2009 |
1.8.2009 |
|
CEN |
EN 54-21:2006 Fire detection and fire alarm systems — Part 21: Alarm transmission and fault warning routing equipment |
|
1.3.2007 |
1.6.2009 |
|
CEN |
EN 54-23:2010 Fire detection and fire alarm systems — Part 23: Fire alarm devices — Visual alarm devices |
|
1.12.2010 |
31.12.2013 |
|
CEN |
EN 54-24:2008 Fire detection and fire alarm systems — Part 24: Components of voice alarm systems — Loudspeakers |
|
1.1.2009 |
1.4.2011 |
|
CEN |
EN 54-25:2008 Fire detection and fire alarm systems — Part 25: Components using radio links |
|
1.1.2009 |
1.4.2011 |
|
|
EN 54-25:2008/AC:2012 |
|
1.7.2012 |
1.7.2012 |
|
CEN |
EN 179:2008 Building hardware — Emergency exit devices operated by a lever handle or push pad, for use on escape routes — Requirements and test methods |
EN 179:1997 |
1.1.2009 |
1.1.2010 |
|
CEN |
EN 197-1:2011 Cement — Part 1: Composition, specifications and conformity criteria for common cements |
EN 197-1:2000 EN 197-4:2004 |
1.7.2012 |
1.7.2013 |
|
CEN |
EN 295-1:2013 Vitrified clay pipe systems for drains and sewers — Part 1: Requirements for pipes, fittings and joints |
EN 295-10:2005 |
1.11.2013 |
1.11.2014 |
|
CEN |
EN 295-4:2013 Vitrified clay pipe systems for drains and sewers — Part 4: Requirements for adaptors, connectors and flexible couplings |
EN 295-10:2005 |
1.11.2013 |
1.11.2014 |
|
CEN |
EN 295-5:2013 Vitrified clay pipe systems for drains and sewers — Part 5: Requirements for perforated pipes and fittings |
EN 295-10:2005 |
1.11.2013 |
1.11.2014 |
|
CEN |
EN 295-6:2013 Vitrified clay pipes systems for drain and sewers — Part 6: Requirements for components of manholes and inspection chambers |
EN 295-10:2005 |
1.11.2013 |
1.11.2014 |
|
CEN |
EN 295-7:2013 Vitrified clay pipe systems for drains and sewers — Part 7: Requirements for pipes and joints for pipe jacking |
EN 295-10:2005 |
1.11.2013 |
1.11.2014 |
|
CEN |
EN 331:1998 Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings |
|
1.9.2011 |
1.9.2012 |
|
|
EN 331:1998/A1:2010 |
|
1.9.2011 |
1.9.2012 |
|
CEN |
EN 413-1:2011 Masonry cement — Part 1: Composition, specifications and conformity criteria |
EN 413-1:2004 |
1.2.2012 |
1.2.2013 |
|
CEN |
EN 416-1:2009 Single burner gas-fired overhead radiant tube heaters for non-domestic use — Part 1: Safety |
|
1.12.2009 |
1.12.2010 |
|
CEN |
EN 438-7:2005 High-pressure decorative laminates (HPL) — Sheets based on thermosetting resins (Usually called Laminates) — Part 7: Compact laminate and HPL composite panels for internal and external wall and ceiling finishes |
|
1.11.2005 |
1.11.2006 |
|
CEN |
EN 442-1:2014 Radiators and convectors — Part 1: Technical specifications and requirements |
EN 442-1:1995 |
13.11.2015 |
13.11.2016 |
|
CEN |
EN 450-1:2012 Fly ash for concrete — Part 1: Definition, specifications and conformity criteria |
EN 450-1:2005+A1:2007 |
1.5.2013 |
1.5.2014 |
|
CEN |
EN 459-1:2010 Building lime — Part 1: Definitions, specifications and conformity criteria |
EN 459-1:2001 |
1.6.2011 |
1.6.2012 |
|
CEN |
EN 490:2011 Concrete roofing tiles and fittings for roof covering and wall cladding — Product specifications |
EN 490:2004 |
1.8.2012 |
1.8.2012 |
|
CEN |
EN 492:2012 Fibre-cement slates and fittings — Product specification and test methods |
EN 492:2004 |
1.7.2013 |
1.7.2013 |
|
CEN |
EN 494:2012+A1:2015 Fibre-cement profiled sheets and fittings — Product specification and test methods |
EN 494:2012 |
8.4.2016 |
8.4.2017 |
|
CEN |
EN 516:2006 Prefabricated accessories for roofing — Installations for roof access — Walkways, treads and steps |
|
1.11.2006 |
1.11.2007 |
|
CEN |
EN 517:2006 Prefabricated accessories for roofing — Roof safety hooks |
|
1.12.2006 |
1.12.2007 |
|
CEN |
EN 520:2004+A1:2009 Gypsum plasterboards — Definitions, requirements and test methods |
EN 520:2004 |
1.6.2010 |
1.12.2010 |
|
CEN |
EN 523:2003 Steel strip sheaths for prestressing tendons — Terminology, requirements, quality control |
|
1.6.2004 |
1.6.2005 |
|
CEN |
EN 534:2006+A1:2010 Corrugated bitumen sheets — Product specification and test methods |
EN 534:2006 |
1.1.2011 |
1.1.2011 |
|
CEN |
EN 544:2011 Bitumen shingles with mineral and/or synthetic reinforcements — Product specification and test methods |
EN 544:2005 |
1.4.2012 |
1.4.2012 |
|
CEN |
EN 572-9:2004 Glass in building — Basic soda lime silicate glass products — Part 9: Evaluation of conformity/Product standard |
|
1.9.2005 |
1.9.2006 |
|
CEN |
EN 588-2:2001 Fibre cement pipes for drains and sewers — Part 2: Manholes and inspection chambers |
|
1.10.2002 |
1.10.2003 |
|
CEN |
EN 598:2007+A1:2009 Ductile iron pipes, fittings, accessories and their joints for sewerage applications — Requirements and test methods |
EN 598:2007 |
1.4.2010 |
1.4.2011 |
|
CEN |
EN 621:2009 Non-domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW, without a fan to assist transportation of combustion air and/or combustion products |
|
1.8.2010 |
1.8.2011 |
|
CEN |
EN 671-1:2012 Fixed firefighting systems — Hose systems — Part 1: Hose reels with semi-rigid hose |
EN 671-1:2001 |
1.3.2013 |
1.7.2013 |
|
CEN |
EN 671-2:2012 Fixed firefighting systems — Hose systems — Part 2: Hose systems with lay-flat hose |
EN 671-2:2001 |
1.3.2013 |
1.7.2013 |
|
CEN |
EN 681-1:1996 Elastomeric seals — Materials requirements for pipe joint seals used in water and drainage applications — Part 1: Vulcanized rubber |
|
1.1.2003 |
1.1.2009 |
|
|
EN 681-1:1996/A2:2002 |
|
1.1.2003 |
1.1.2004 |
|
|
EN 681-1:1996/A3:2005 |
|
1.1.2008 |
1.1.2009 |
|
|
EN 681-1:1996/A1:1998 |
|
1.1.2003 |
1.1.2004 |
|
CEN |
EN 681-2:2000 Elastomeric Seals — Materials requirements for pipe joint seals used in water and drainage applications — Part 2: Thermoplastic elastomers |
|
1.1.2003 |
1.1.2004 |
|
|
EN 681-2:2000/A1:2002 |
|
1.1.2003 |
1.1.2004 |
|
|
EN 681-2:2000/A2:2005 |
|
1.1.2010 |
1.1.2010 |
|
CEN |
EN 681-3:2000 Elastomeric seals — Materials requirements for pipe joint seals used in water and drainage applications — Part 3: Cellular materials of vulcanized rubber |
|
1.1.2003 |
1.1.2004 |
|
|
EN 681-3:2000/A1:2002 |
|
1.1.2003 |
1.1.2004 |
|
|
EN 681-3:2000/A2:2005 |
|
1.7.2012 |
1.7.2012 |
|
CEN |
EN 681-4:2000 Elastomeric seals — Materials requirements for pipe joint seals used in water and drainage applications — Part 4: Cast polyurethane sealing elements |
|
1.1.2003 |
1.1.2004 |
|
|
EN 681-4:2000/A1:2002 |
|
1.1.2003 |
1.1.2004 |
|
|
EN 681-4:2000/A2:2005 |
|
1.7.2012 |
1.7.2012 |
|
CEN |
EN 682:2002 Elastomeric Seals — Materials requirements for seals used in pipes and fittings carrying gas and hydrocarbon fluids |
|
1.10.2002 |
1.12.2003 |
|
|
EN 682:2002/A1:2005 |
|
1.7.2012 |
1.7.2012 |
|
CEN |
EN 771-1:2011+A1:2015 Specification for masonry units — Part 1: Clay masonry units |
EN 771-1:2011 |
10.6.2016 |
10.6.2017 |
|
CEN |
EN 771-2:2011+A1:2015 Specification for masonry units — Part 2: Calcium silicate masonry units |
EN 771-2:2011 |
10.6.2016 |
10.6.2017 |
|
CEN |
EN 771-3:2011+A1:2015 Specification for masonry units — Part 3: Aggregate concrete masonry units (Dense and lightweight aggregates) |
EN 771-3:2011 |
10.6.2016 |
10.6.2017 |
|
CEN |
EN 771-4:2011+A1:2015 Specification for masonry units — Part 4: Autoclaved aerated concrete masonry units |
EN 771-4:2011 |
10.6.2016 |
10.6.2017 |
|
CEN |
EN 771-5:2011+A1:2015 Specification for masonry units — Part 5: Manufactured stone masonry units |
EN 771-5:2011 |
10.6.2016 |
10.6.2017 |
|
CEN |
EN 771-6:2011+A1:2015 Specification for masonry units — Part 6: Natural stone masonry units |
EN 771-6:2011 |
8.4.2016 |
8.4.2017 |
|
CEN |
EN 777-1:2009 Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use — Part 1: System D — Safety |
|
1.11.2009 |
1.11.2010 |
|
CEN |
EN 777-2:2009 Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use — Part 2: System E — Safety |
|
1.11.2009 |
1.11.2010 |
|
CEN |
EN 777-3:2009 Multi-burner gas-fired overhead radiant tube heater systems for non domestic use — Part 3: System F — Safety |
|
1.11.2009 |
1.11.2010 |
|
CEN |
EN 777-4:2009 Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use — Part 4: System H — Safety |
|
1.11.2009 |
1.11.2010 |
|
CEN |
EN 778:2009 Domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 70 kW, without a fan to assist transportation of combustion air and/or combustion products |
|
1.8.2010 |
1.8.2011 |
|
CEN |
EN 845-1:2013+A1:2016 Specification for ancillary components for masonry — Part 1: Wall ties, tension straps, hangers and brackets |
EN 845-1:2013 |
10.3.2017 |
10.3.2018 |
|
CEN |
EN 845-2:2013+A1:2016 Specification for ancillary components for masonry — Part 2: Lintels |
EN 845-2:2013 |
10.3.2017 |
10.3.2018 |
|
CEN |
EN 845-3:2013+A1:2016 Specification for ancillary components for masonry — Part 3: Bed joint reinforcement of steel meshwork |
EN 845-3:2013 |
10.3.2017 |
10.3.2018 |
|
CEN |
EN 858-1:2002 Separator systems for light liquids (e.g. oil and petrol) — Part 1: Principles of product design, performance and testing, marking and quality control |
|
1.9.2005 |
1.9.2006 |
|
|
EN 858-1:2002/A1:2004 |
|
1.9.2005 |
1.9.2006 |
|
CEN |
EN 877:1999 Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings — Requirements, test methods and quality assurance |
|
1.1.2008 |
1.9.2009 |
|
|
EN 877:1999/A1:2006 |
|
1.1.2008 |
1.9.2009 |
|
|
EN 877:1999/A1:2006/AC:2008 |
|
1.1.2009 |
1.1.2009 |
|
CEN |
EN 934-2:2009+A1:2012 Admixtures for concrete, mortar and grout — Part 2: Concrete admixtures — Definitions, requirements, conformity, marking and labelling |
EN 934-2:2009 |
1.3.2013 |
1.9.2013 |
|
CEN |
EN 934-3:2009+A1:2012 Admixtures for concrete, mortar and grout — Part 3: Admixtures for masonry mortar — Definitions, requirements, conformity and marking and labelling |
EN 934-3:2009 |
1.3.2013 |
1.9.2013 |
|
CEN |
EN 934-4:2009 Admixtures for concrete, mortar and grout — Part 4: Admixtures for grout for prestressing tendons — Definitions, requirements, conformity, marking and labelling |
EN 934-4:2001 |
1.3.2010 |
1.3.2011 |
|
CEN |
EN 934-5:2007 Admixtures for concrete, mortar and grout — Part 5: Admixtures for sprayed concrete — Definitions, requirements, conformity, marking and labelling |
|
1.1.2009 |
1.1.2010 |
|
CEN |
EN 969:2009 Ductile iron pipes, fittings, accessories and their joints for gas pipelines — Requirements and test methods |
|
1.1.2010 |
1.1.2011 |
|
CEN |
EN 997:2012 WC pans and WC suites with integral trap |
EN 997:2003 |
1.12.2012 |
1.6.2013 |
|
|
EN 997:2012/AC:2012 |
|
1.3.2013 |
1.3.2013 |
|
CEN |
EN 998-1:2016 Specification for mortar for masonry — Part 1: Rendering and plastering mortar |
EN 998-1:2010 |
11.8.2017 |
11.8.2017 |
|
CEN |
EN 998-2:2016 Specification for mortar for masonry — Part 2: Masonry mortar |
EN 998-2:2010 |
11.8.2017 |
11.8.2017 |
|
CEN |
EN 1013:2012+A1:2014 Light transmitting single skin profiled plastics sheets for internal and external roofs, walls and ceilings — Requirements and test methods |
EN 1013:2012 |
10.7.2015 |
10.7.2016 |
|
CEN |
EN 1020:2009 Non-domestic forced convection gas-fired air heaters for space heating not exceeding a net heat input of 300 kW incorporating a fan to assist transportation of combustion air or combustion products |
|
1.8.2010 |
1.8.2011 |
|
CEN |
EN 1036-2:2008 Glass in building — Mirrors from silver-coated float glass for internal use — Part 2: Evaluation of conformity; product standard |
|
1.1.2009 |
1.1.2010 |
|
CEN |
EN 1051-2:2007 Glass in building — Glass blocks and glass pavers — Part 2: Evaluation of conformity/Product standard |
|
1.1.2009 |
1.1.2010 |
|
CEN |
EN 1057:2006+A1:2010 Copper and copper alloys — Seamless, round copper tubes for water and gas in sanitary and heating applications |
EN 1057:2006 |
1.12.2010 |
1.12.2010 |
|
CEN |
EN 1090-1:2009+A1:2011 Execution of steel structures and aluminium structures — Part 1: Requirements for conformity assessment of structural components |
EN 1090-1:2009 |
1.9.2012 |
1.7.2014 |
|
CEN |
EN 1096-4:2004 Glass in building — Coated glass — Part 4: Evaluation of conformity/Product standard |
|
1.9.2005 |
1.9.2006 |
|
CEN |
EN 1123-1:1999 Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems — Part 1: Requirements, testing, quality control |
|
1.6.2005 |
1.6.2006 |
|
|
EN 1123-1:1999/A1:2004 |
|
1.6.2005 |
1.6.2006 |
|
CEN |
EN 1124-1:1999 Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems — Part 1: Requirements, testing, quality control |
|
1.6.2005 |
1.6.2006 |
|
|
EN 1124-1:1999/A1:2004 |
|
1.6.2005 |
1.6.2006 |
|
CEN |
EN 1125:2008 Building hardware — Panic exit devices operated by a horizontal bar, for use on escape routes — Requirements and test methods |
EN 1125:1997 |
1.1.2009 |
1.1.2010 |
|
CEN |
EN 1154:1996 Building hardware — Controlled door closing devices — Requirements and test methods |
|
1.10.2003 |
1.10.2004 |
|
|
EN 1154:1996/A1:2002 |
|
1.10.2003 |
1.10.2004 |
|
|
EN 1154:1996/A1:2002/AC:2006 |
|
1.1.2010 |
1.1.2010 |
|
CEN |
EN 1155:1997 Building hardware — Electrically powered hold-open devices for swing doors — Requirements and test methods |
|
1.10.2003 |
1.10.2004 |
|
|
EN 1155:1997/A1:2002 |
|
1.10.2003 |
1.10.2004 |
|
|
EN 1155:1997/A1:2002/AC:2006 |
|
1.1.2010 |
1.1.2010 |
|
CEN |
EN 1158:1997 Building hardware — Door coordinator devices — Requirements and test methods |
|
1.10.2003 |
1.10.2004 |
|
|
EN 1158:1997/A1:2002/AC:2006 |
|
1.6.2006 |
1.6.2006 |
|
|
EN 1158:1997/A1:2002 |
|
1.10.2003 |
1.10.2004 |
|
CEN |
EN 1168:2005+A3:2011 Precast concrete products — Hollow core slabs |
EN 1168:2005+A2:2009 |
1.7.2012 |
1.7.2013 |
|
CEN |
EN 1279-5:2005+A2:2010 Glass in building — Insulating glass units — Part 5: Evaluation of conformity |
EN 1279-5:2005+A1:2008 |
1.2.2011 |
1.2.2012 |
|
CEN |
EN 1304:2005 Clay roofing tiles and fittings — Product definitions and specifications |
|
1.2.2006 |
1.2.2007 |
|
CEN |
EN 1317-5:2007+A2:2012 Road restraint systems — Part 5: Product requirements and evaluation of conformity for vehicle restraint systems |
EN 1317-5:2007+A1:2008 |
1.1.2013 |
1.1.2013 |
|
|
EN 1317-5:2007+A2:2012/AC:2012 |
|
1.3.2013 |
1.3.2013 |
|
CEN |
EN 1319:2009 Domestic gas-fired forced convection air heaters for space heating, with fan-assisted burners not exceeding a net heat input of 70 kW |
|
1.10.2010 |
1.10.2011 |
|
CEN |
EN 1337-3:2005 Structural bearings — Part 3: Elastomeric bearings |
|
1.1.2006 |
1.1.2007 |
|
CEN |
EN 1337-4:2004 Structural bearings — Part 4: Roller bearings |
|
1.2.2005 |
1.2.2006 |
|
|
EN 1337-4:2004/AC:2007 |
|
1.1.2008 |
1.1.2008 |
|
CEN |
EN 1337-5:2005 Structural bearings — Part 5: Pot bearings |
|
1.1.2006 |
1.1.2007 |
|
CEN |
EN 1337-6:2004 Structural bearings — Part 6: Rocker bearings |
|
1.2.2005 |
1.2.2006 |
|
CEN |
EN 1337-7:2004 Structural bearings — Part 7: Spherical and cylindrical PTFE bearings |
EN 1337-7:2000 |
1.12.2004 |
1.6.2005 |
|
CEN |
EN 1337-8:2007 Structural bearings — Part 8: Guide Bearings and Restraint Bearings |
|
1.1.2009 |
1.1.2010 |
|
CEN |
EN 1338:2003 Concrete paving blocks — Requirements and test methods |
|
1.3.2004 |
1.3.2005 |
|
|
EN 1338:2003/AC:2006 |
|
1.1.2007 |
1.1.2007 |
|
CEN |
EN 1339:2003 Concrete paving flags — Requirements and test methods |
|
1.3.2004 |
1.3.2005 |
|
|
EN 1339:2003/AC:2006 |
|
1.1.2007 |
1.1.2007 |
|
CEN |
EN 1340:2003 Concrete kerb units — Requirements and test methods |
|
1.2.2004 |
1.2.2005 |
|
|
EN 1340:2003/AC:2006 |
|
1.1.2007 |
1.1.2007 |
|
CEN |
EN 1341:2012 Slabs of natural stone for external paving — Requirements and test methods |
EN 1341:2001 |
1.9.2013 |
1.9.2013 |
|
CEN |
EN 1342:2012 Setts of natural stone for external paving — Requirements and test methods |
EN 1342:2001 |
1.9.2013 |
1.9.2013 |
|
CEN |
EN 1343:2012 Kerbs of natural stone for external paving — Requirements and test methods |
EN 1343:2001 |
1.9.2013 |
1.9.2013 |
|
CEN |
EN 1344:2013 Clay pavers — Requirements and test methods |
EN 1344:2002 |
8.8.2014 |
8.8.2016 |
|
|
EN 1344:2013/AC:2015 |
|
|
|
|
CEN |
EN 1423:2012 Road marking materials — Drop on materials — Glass beads, antiskid aggregates and mixtures of the two |
EN 1423:1997 |
1.11.2012 |
1.11.2012 |
|
|
EN 1423:2012/AC:2013 |
|
1.7.2013 |
1.7.2013 |
|
CEN |
EN 1433:2002 Drainage channels for vehicular and pedestrian areas — Classification, design and testing requirements, marking and evaluation of conformity |
|
1.8.2003 |
1.8.2004 |
|
|
EN 1433:2002/A1:2005 |
|
1.1.2006 |
1.1.2006 |
|
CEN |
EN 1457-1:2012 Chimneys — Clay/ceramic flue liners — Part 1: Flue liners operating under dry conditions — Requirements and test methods |
EN 1457:1999 |
1.11.2012 |
1.11.2013 |
|
CEN |
EN 1457-2:2012 Chimneys — Clay/ceramic flue liners — Part 2: Flue liners operating under wet conditions — Requirements and test methods |
EN 1457:1999 |
1.11.2012 |
1.11.2013 |
|
CEN |
EN 1463-1:2009 Road marking materials — Retroreflecting road studs — Part 1: Initial performance requirements |
EN 1463-1:1997 |
1.1.2010 |
1.1.2011 |
|
CEN |
EN 1469:2015 Natural stone products — Slabs for cladding — Requirements |
EN 1469:2004 |
8.4.2016 |
8.4.2017 |
|
CEN |
EN 1504-2:2004 Products and systems for the protection and repair of concrete structures — Definitions, requirements, quality control and evaluation of conformity — Part 2: Surface protection systems for concrete |
|
1.9.2005 |
1.1.2009 |
|
CEN |
EN 1504-3:2005 Products and systems for the protection and repair of concrete structures — Definitions, requirements, quality control and evaluation of conformity — Part 3: Structural and non-structural repair |
|
1.10.2006 |
1.1.2009 |
|
CEN |
EN 1504-4:2004 Products and systems for the protection and repair of concrete structures — Definitions, requirements, quality control and evaluation of conformity — Part 4: Structural bonding |
|
1.9.2005 |
1.1.2009 |
|
CEN |
EN 1504-5:2004 Products and systems for the protection and repair of concrete structures — Definitions, requirements, quality control and evaluation of conformity — Part 5: Concrete injection |
|
1.10.2005 |
1.1.2009 |
|
CEN |
EN 1504-6:2006 Products and systems for the protection and repair of concrete structures — Definitions, requirements, quality control and evaluation of conformity — Part 6: Anchoring of reinforcing steel bar |
|
1.6.2007 |
1.1.2009 |
|
CEN |
EN 1504-7:2006 Products and systems for the protection and repair of concrete structures — Definitions, requirements, quality control and evaluation of conformity — Part 7: Reinforcement corrosion protection |
|
1.6.2007 |
1.1.2009 |
|
CEN |
EN 1520:2011 Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non-structural reinforcement |
EN 1520:2002 |
1.1.2012 |
1.1.2013 |
|
CEN |
EN 1748-1-2:2004 Glass in building — Special basic products — Borosilicate glasses — Part 1-2: Evaluation of conformity/Product standard |
|
1.9.2005 |
1.9.2006 |
|
CEN |
EN 1748-2-2:2004 Glass in building — Special basic products — Glass ceramics — Part 2-2: Evaluation of conformity/Product standard |
|
1.9.2005 |
1.9.2006 |
|
CEN |
EN 1806:2006 Chimneys — Clay/ceramic flue blocks for single wall chimneys — Requirements and test methods |
|
1.5.2007 |
1.5.2008 |
|
CEN |
EN 1825-1:2004 Grease separators — Part 1: Principles of design, performance and testing, marking and quality control |
|
1.9.2005 |
1.9.2006 |
|
|
EN 1825-1:2004/AC:2006 |
|
1.1.2007 |
1.1.2007 |
|
CEN |
EN 1856-1:2009 Chimneys — Requirements for metal chimneys — Part 1: System chimney products |
EN 1856-1:2003 |
1.3.2010 |
1.3.2011 |
|
CEN |
EN 1856-2:2009 Chimneys — Requirements for metal chimneys — Part 2: Metal flue liners and connecting flue pipes |
EN 1856-2:2004 |
1.3.2010 |
1.3.2011 |
|
CEN |
EN 1857:2010 Chimneys — Components — Concrete flue liners |
EN 1857:2003+A1:2008 |
1.1.2011 |
1.1.2012 |
|
CEN |
EN 1858:2008+A1:2011 Chimneys — Components — Concrete flue blocks |
EN 1858:2008 |
1.4.2012 |
1.4.2013 |
|
CEN |
EN 1863-2:2004 Glass in building — Heat strengthened soda lime silicate glass — Part 2: Evaluation of conformity/Product standard |
|
1.9.2005 |
1.9.2006 |
|
CEN |
EN 1873:2005 Prefabricated accessories for roofing — Individual roof lights of plastics — Product specification and test methods |
|
1.10.2006 |
1.10.2009 |
|
CEN |
EN 1916:2002 Concrete pipes and fittings, unreinforced, steel fibre and reinforced |
|
1.8.2003 |
23.11.2004 |
|
|
EN 1916:2002/AC:2008 |
|
1.1.2009 |
1.1.2009 |
|
CEN |
EN 1917:2002 Concrete manholes and inspection chambers, unreinforced, steel fibre and reinforced |
|
1.8.2003 |
23.11.2004 |
|
|
EN 1917:2002/AC:2008 |
|
1.1.2009 |
1.1.2009 |
|
CEN |
EN 1935:2002 Building hardware — Single-axis hinges — Requirements and test methods |
|
1.10.2002 |
1.12.2003 |
|
|
EN 1935:2002/AC:2003 |
|
1.1.2007 |
1.1.2007 |
|
CEN |
EN 10025-1:2004 Hot rolled products of structural steels — Part 1: General technical delivery conditions |
|
1.9.2005 |
1.9.2006 |
|
CEN |
EN 10088-4:2009 Stainless steels — Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes |
|
1.2.2010 |
1.2.2011 |
|
CEN |
EN 10088-5:2009 Stainless steels — Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes |
|
1.1.2010 |
1.1.2011 |
|
CEN |
EN 10210-1:2006 Hot finished structural hollow sections of non-alloy and fine grain steels — Part 1: Technical delivery conditions |
|
1.2.2007 |
1.2.2008 |
|
CEN |
EN 10219-1:2006 Cold formed welded structural hollow sections of non-alloy and fine grain steels — Part 1: Technical delivery conditions |
|
1.2.2007 |
1.2.2008 |
|
CEN |
EN 10224:2002 Non-alloy steel tubes and fittings for the conveyance of aqueous liquids including water for human consumption — Technical delivery conditions |
|
1.4.2006 |
1.4.2007 |
|
|
EN 10224:2002/A1:2005 |
|
1.4.2006 |
1.4.2007 |
|
CEN |
EN 10255:2004+A1:2007 Non-Alloy steel tubes suitable for welding and threading — Technical delivery conditions |
|
1.1.2010 |
1.1.2011 |
|
CEN |
EN 10311:2005 Joints for the connection of steel tubes and fittings for the conveyance of water and other aqueous liquids |
|
1.3.2006 |
1.3.2007 |
|
CEN |
EN 10312:2002 Welded stainless steel tubes for the conveyance of aqueous liquids including water for human consumption — Technical delivery conditions |
|
1.4.2006 |
1.4.2007 |
|
|
EN 10312:2002/A1:2005 |
|
1.4.2006 |
1.4.2007 |
|
CEN |
EN 10340:2007 Steel castings for structural uses |
|
1.1.2010 |
1.1.2011 |
|
|
EN 10340:2007/AC:2008 |
|
1.1.2010 |
1.1.2010 |
|
CEN |
EN 10343:2009 Steels for quenching and tempering for construction purposes — Technical delivery conditions |
|
1.1.2010 |
1.1.2011 |
|
CEN |
EN 12004:2007+A1:2012 Adhesives for tiles — Requirements, evaluation of conformity, classification and designation |
EN 12004:2007 |
1.4.2013 |
1.7.2013 |
|
CEN |
EN 12050-1:2001 Wastewater lifting plants for buildings and sites — Principles of construction and testing — Part 1: Lifting plants for wastewater containing faecal matter |
|
1.11.2001 |
1.11.2002 |
|
CEN |
EN 12050-2:2000 Wastewater lifting plants for buildings and sites — Principles of construction and testing — Part 2: Lifting plants for faecal-free wastewater |
|
1.10.2001 |
1.10.2002 |
|
CEN |
EN 12050-3:2000 Wastewater lifting plants for buildings and sites — Principles of construction and testing — Part 3: Lifting plants for wastewater containing faecal matter for limited applications |
|
1.10.2001 |
1.10.2002 |
|
CEN |
EN 12050-4:2000 Wastewater lifting plants for buildings and sites — Principles of construction and testing — Part 4: Non-return valves for faecal-free wastewater and wastewater containing faecal matter |
|
1.10.2001 |
1.10.2002 |
|
CEN |
EN 12057:2004 Natural stone products — Modular tiles — Requirements |
|
1.9.2005 |
1.9.2006 |
|
CEN |
EN 12058:2004 Natural stone products — Slabs for floors and stairs — Requirements |
|
1.9.2005 |
1.9.2006 |
|
CEN |
EN 12094-1:2003 Fixed firefighting systems — Components for gas extinguishing systems — Part 1: Requirements and test methods for electrical automatic control and delay devices |
|
1.2.2004 |
1.5.2006 |
|
CEN |
EN 12094-2:2003 Fixed firefighting systems — Components for gas extinguishing systems — Part 2: Requirements and test methods for non-electrical automatic control and delay devices |
|
1.2.2004 |
1.5.2006 |
|
CEN |
EN 12094-3:2003 Fixed firefighting systems — Components for gas extinguishing systems — Part 3: Requirements and test methods for manual triggering and stop devices |
|
1.1.2004 |
1.9.2005 |
|
CEN |
EN 12094-4:2004 Fixed firefighting systems — Components for gas extinguishing systems — Part 4: Requirements and test methods for container valve assemblies and their actuators |
|
1.5.2005 |
1.8.2007 |
|
CEN |
EN 12094-5:2006 Fixed firefighting systems — Components for gas extinguishing systems — Part 5: Requirements and test methods for high and low pressure selector valves and their actuators |
EN 12094-5:2000 |
1.2.2007 |
1.5.2009 |
|
CEN |
EN 12094-6:2006 Fixed firefighting systems — Components for gas extinguishing systems — Part 6: Requirements and test methods for non-electrical disable devices |
EN 12094-6:2000 |
1.2.2007 |
1.5.2009 |
|
CEN |
EN 12094-7:2000 Fixed firefighting systems — Components for gas extinguishing systems — Part 7: Requirements and test methods for nozzles for CO2 systems |
|
1.10.2001 |
1.4.2004 |
|
|
EN 12094-7:2000/A1:2005 |
|
1.11.2005 |
1.11.2006 |
|
CEN |
EN 12094-8:2006 Fixed firefighting systems — Components for gas extinguishing systems — Part 8: Requirements and test methods for connectors |
|
1.2.2007 |
1.5.2009 |
|
CEN |
EN 12094-9:2003 Fixed firefighting systems — Components for gas extinguishing systems — Part 9: Requirements and test methods for special fire detectors |
|
1.1.2004 |
1.9.2005 |
|
CEN |
EN 12094-10:2003 Fixed firefighting systems — Components for gas extinguishing systems — Part 10: Requirements and test methods for pressure gauges and pressure switches |
|
1.2.2004 |
1.5.2006 |
|
CEN |
EN 12094-11:2003 Fixed firefighting systems — Components for gas extinguishing systems — Part 11: Requirements and test methods for mechanical weighing devices |
|
1.1.2004 |
1.9.2005 |
|
CEN |
EN 12094-12:2003 Fixed firefighting systems — Components for gas extinguishing systems — Part 12: Requirements and test methods for pneumatic alarm devices |
|
1.1.2004 |
1.9.2005 |
|
CEN |
EN 12094-13:2001 Fixed firefighting systems — Components for gas extinguishing systems — Part 13: Requirements and test methods for check valves and non-return valves |
|
1.1.2002 |
1.4.2004 |
|
|
EN 12094-13:2001/AC:2002 |
|
1.1.2010 |
1.1.2010 |
|
CEN |
EN 12101-1:2005 Smoke and heat control systems — Part 1: Specification for smoke barriers |
|
1.6.2006 |
1.9.2008 |
|
|
EN 12101-1:2005/A1:2006 |
|
1.12.2006 |
1.9.2008 |
|
CEN |
EN 12101-2:2003 Smoke and heat control systems — Part 2: Specification for natural smoke and heat exhaust ventilators |
|
1.4.2004 |
1.9.2006 |
|
CEN |
EN 12101-3:2015 Smoke and heat control systems — Part 3: Specification for powered smoke and heat control ventilators (Fans) |
EN 12101-3:2002 |
8.4.2016 |
8.4.2017 |
|
CEN |
EN 12101-6:2005 Smoke and heat control systems — Part 6: Specification for pressure differential systems — Kits |
|
1.4.2006 |
1.4.2007 |
|
|
EN 12101-6:2005/AC:2006 |
|
1.1.2007 |
1.1.2007 |
|
CEN |
EN 12101-7:2011 Smoke and heat control systems — Part 7: Smoke duct sections |
|
1.2.2012 |
1.2.2013 |
|
CEN |
EN 12101-8:2011 Smoke and heat control systems — Part 8: Smoke control dampers |
|
1.2.2012 |
1.2.2013 |
|
CEN |
EN 12101-10:2005 Smoke and heat control systems — Part 10: Power supplies |
|
1.10.2006 |
1.5.2012 |
|
|
EN 12101-10:2005/AC:2007 |
|
1.1.2008 |
1.1.2008 |
|
CEN |
EN 12150-2:2004 Glass in building — Thermally toughened soda lime silicate safety glass — Part 2: Evaluation of conformity/Product standard |
|
1.9.2005 |
1.9.2006 |
|
CEN |
EN 12209:2003 Building hardware — Locks and latches — Mechanically operated locks, latches and locking plates — Requirements and test methods |
|
1.12.2004 |
1.6.2006 |
|
|
EN 12209:2003/AC:2005 |
|
1.6.2006 |
1.6.2006 |
|
CEN |
EN 12259-1:1999 + A1:2001 Fixed firefighting systems — Components for sprinkler and water spray systems — Part 1: Sprinklers |
|
1.4.2002 |
1.9.2005 |
|
|
EN 12259-1:1999 + A1:2001/A2:2004 |
|
1.3.2005 |
1.3.2006 |
|
|
EN 12259-1:1999 + A1:2001/A3:2006 |
|
1.11.2006 |
1.11.2007 |
|
CEN |
EN 12259-2:1999 Fixed firefighting systems — Components for sprinkler and water spray systems — Part 2: Wet alarm valve assemblies |
|
1.1.2002 |
1.8.2007 |
|
|
EN 12259-2:1999/A1:2001 |
|
1.1.2002 |
1.8.2007 |
|
|
EN 12259-2:1999/AC:2002 |
|
1.6.2005 |
1.6.2005 |
|
|
EN 12259-2:1999/A2:2005 |
|
1.9.2006 |
1.8.2007 |
|
CEN |
EN 12259-3:2000 Fixed firefighting systems — Components for automatic sprinkler and water spray systems — Part 3: Dry alarm valve assemblies |
|
1.1.2002 |
1.8.2007 |
|
|
EN 12259-3:2000/A1:2001 |
|
1.1.2002 |
1.8.2007 |
|
|
EN 12259-3:2000/A2:2005 |
|
1.9.2006 |
1.8.2007 |
|
CEN |
EN 12259-4:2000 Fixed firefighting systems — Components for sprinkler and water spray systems — Part 4: Water motor alarms |
|
1.1.2002 |
1.4.2004 |
|
|
EN 12259-4:2000/A1:2001 |
|
1.1.2002 |
1.4.2004 |
|
CEN |
EN 12259-5:2002 Fixed firefighting systems — Components for sprinkler and water spray systems — Part 5: Water flow detectors |
|
1.7.2003 |
1.9.2005 |
|
CEN |
EN 12271:2006 Surface dressing — Requirements |
|
1.1.2008 |
1.1.2011 |
|
CEN |
EN 12273:2008 Slurry surfacing — Requirements |
|
1.1.2009 |
1.1.2011 |
|
CEN |
EN 12285-2:2005 Workshop fabricated steel tanks — Part 2: Horizontal cylindrical single skin and double skin tanks for the aboveground storage of flammable and non-flammable water polluting liquids |
|
1.1.2006 |
1.1.2008 |
|
CEN |
EN 12326-1:2014 Slate and stone for discontinuous roofing and external cladding — Part 1: Specifications for slate and carbonate slate |
EN 12326-1:2004 |
13.2.2015 |
13.2.2016 |
|
CEN |
EN 12337-2:2004 Glass in building — Chemically strengthened soda lime silicate glass — Part 2: Evaluation of conformity/Product standard |
|
1.9.2005 |
1.9.2006 |
|
CEN |
EN 12352:2006 Traffic control equipment — Warning and safety light devices |
|
1.2.2007 |
1.2.2008 |
|
CEN |
EN 12368:2006 Traffic control equipment — Signal heads |
|
1.2.2007 |
1.2.2008 |
|
CEN |
EN 12380:2002 Air admittance valves for drainage systems — Requirements, tests methods and evaluation of conformity |
|
1.10.2003 |
1.10.2004 |
|
CEN |
EN 12446:2011 Chimneys — Components — Concrete outer wall elements |
EN 12446:2003 |
1.4.2012 |
1.4.2013 |
|
CEN |
EN 12467:2012 Fibre-cement flat sheets — Product specification and test methods |
EN 12467:2004 |
1.7.2013 |
1.7.2013 |
|
CEN |
EN 12566-1:2000 Small wastewater treatment systems for up to 50 PT — Part 1: Prefabricated septic tanks |
|
1.12.2004 |
1.12.2005 |
|
|
EN 12566-1:2000/A1:2003 |
|
1.12.2004 |
1.12.2005 |
|
CEN |
EN 12566-3:2005+A2:2013 Small wastewater treatment systems for up to 50 PT — Part 3: Packaged and/or site assembled domestic wastewater treatment plants |
EN 12566-3:2005+A1:2009 |
8.8.2014 |
8.8.2015 |
|
CEN |
EN 12566-4:2007 Small wastewater treatment systems for up to 50 PT — Part 4: Septic tanks assembled in situ from prefabricated kits |
|
1.1.2009 |
1.1.2010 |
|
CEN |
EN 12566-6:2013 Small wastewater treatment systems for up to 50 PT — Part 6: Prefabricated treatment units for septic tank effluent |
|
1.11.2013 |
1.11.2014 |
|
CEN |
EN 12566-7:2013 Small wastewater treatment systems for up to 50 PT — Part 7: Prefabricated tertiary treatment units |
|
8.8.2014 |
8.8.2015 |
|
CEN |
EN 12591:2009 Bitumen and bituminous binders — Specifications for paving grade bitumens |
|
1.1.2010 |
1.1.2011 |
|
CEN |
EN 12602:2016 Prefabricated reinforced components of autoclaved aerated concrete |
EN 12602:2008+A1:2013 |
10.3.2017 |
10.3.2018 |
|
CEN |
EN 12620:2002+A1:2008 Aggregates for concrete |
EN 12620:2002 |
1.1.2009 |
1.1.2010 |
|
CEN |
EN 12676-1:2000 Anti-glare systems for roads — Part 1: Performance and characteristics |
|
1.2.2004 |
1.2.2006 |
|
|
EN 12676-1:2000/A1:2003 |
|
1.2.2004 |
1.2.2006 |
|
CEN |
EN 12737:2004+A1:2007 Precast concrete products — Floor slats for livestock |
|
1.1.2009 |
1.1.2010 |
|
CEN |
EN 12764:2004+A1:2008 Sanitary appliances — Specification for whirlpool baths |
EN 12764:2004 |
1.1.2009 |
1.1.2010 |
|
CEN |
EN 12794:2005+A1:2007 Precast concrete products — Foundation piles |
EN 12794:2005 |
1.2.2008 |
1.2.2009 |
|
|
EN 12794:2005+A1:2007/AC:2008 |
|
1.8.2009 |
1.8.2009 |
|
CEN |
EN 12809:2001 Residential independent boilers fired by solid fuel — Nominal heat output up to 50 kW — Requirements and test methods |
|
1.7.2005 |
1.7.2007 |
|
|
EN 12809:2001/A1:2004 |
|
1.7.2005 |
1.7.2007 |
|
|
EN 12809:2001/A1:2004/AC:2007 |
|
1.1.2008 |
1.1.2008 |
|
|
EN 12809:2001/AC:2006 |
|
1.1.2008 |
1.1.2008 |
|
CEN |
EN 12815:2001 Residential cookers fired by solid fuel — Requirements and test methods |
|
1.7.2005 |
1.7.2007 |
|
|
EN 12815:2001/AC:2006 |
|
1.1.2007 |
1.1.2007 |
|
|
EN 12815:2001/A1:2004/AC:2007 |
|
1.1.2008 |
1.1.2008 |
|
|
EN 12815:2001/A1:2004 |
|
1.7.2005 |
1.7.2007 |
|
CEN |
EN 12839:2012 Precast concrete products — Elements for fences |
EN 12839:2001 |
1.10.2012 |
1.10.2013 |
|
CEN |
EN 12843:2004 Precast concrete products — Masts and poles |
|
1.9.2005 |
1.9.2007 |
|
CEN |
EN 12859:2011 Gypsum blocks — Definitions, requirements and test methods |
EN 12859:2008 |
1.12.2011 |
1.12.2012 |
|
CEN |
EN 12860:2001 Gypsum based adhesives for gypsum blocks — Definitions, requirements and test methods |
|
1.4.2002 |
1.4.2003 |
|
|
EN 12860:2001/AC:2002 |
|
1.1.2010 |
1.1.2010 |
|
CEN |
EN 12878:2005 Pigments for the colouring of building materials based on cement and/or lime — Specifications and methods of test |
|
1.3.2006 |
1.3.2007 |
|
|
EN 12878:2005/AC:2006 |
|
1.1.2007 |
1.1.2007 |
|
CEN |
EN 12899-1:2007 Fixed, vertical road traffic signs — Part 1: Fixed signs |
|
1.1.2009 |
1.1.2013 |
|
CEN |
EN 12899-2:2007 Fixed, vertical road traffic signs — Part 2: Transilluminated traffic bollards (TTB) |
|
1.1.2009 |
1.1.2013 |
|
CEN |
EN 12899-3:2007 Fixed, vertical road traffic signs — Part 3: Delineator posts and retroreflectors |
|
1.1.2009 |
1.1.2013 |
|
CEN |
EN 12951:2004 Prefabricated accessories for roofing — Permanently fixed roof ladders — Product specification and test methods |
|
1.9.2005 |
1.9.2006 |
|
CEN |
EN 12966-1:2005+A1:2009 Road vertical signs — Variable message traffic signs — Part 1: Product standard |
|
1.8.2010 |
1.8.2010 |
|
CEN |
EN 13024-2:2004 Glass in building — Thermally toughened borosilicate safety glass — Part 2: Evaluation of conformity/Product standard |
|
1.9.2005 |
1.9.2006 |
|
CEN |
EN 13043:2002 Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked areas |
|
1.7.2003 |
1.6.2004 |
|
|
EN 13043:2002/AC:2004 |
|
1.6.2006 |
1.6.2006 |
|
CEN |
EN 13055-1:2002 Lightweight aggregates — Part 1: Lightweight aggregates for concrete, mortar and grout |
|
1.3.2003 |
1.6.2004 |
|
|
EN 13055-1:2002/AC:2004 |
|
1.1.2010 |
1.1.2010 |
|
CEN |
EN 13055-2:2004 Lightweight aggregates — Part 2: Lightweight aggregates for bituminous mixtures and surface treatments and for unbound and bound applications |
|
1.5.2005 |
1.5.2006 |
|
CEN |
EN 13063-1:2005+A1:2007 Chimneys — System chimneys with clay/ceramic flue liners — Part 1: Requirements and test methods for sootfire resistance |
EN 13063-1:2005 |
1.5.2008 |
1.5.2009 |
|
CEN |
EN 13063-2:2005+A1:2007 Chimneys — System chimneys with clay/ceramic flue liners — Part 2: Requirements and test methods under wet conditions |
EN 13063-2:2005 |
1.5.2008 |
1.5.2009 |
|
CEN |
EN 13063-3:2007 Chimneys — System chimneys with clay/ceramic flue liners — Part 3: Requirements and test methods for air flue system chimneys |
|
1.5.2008 |
1.5.2009 |
|
CEN |
EN 13069:2005 Chimneys — Clay/ceramic outer walls for system chimneys — Requirements and test methods |
|
1.5.2006 |
1.5.2007 |
|
CEN |
EN 13084-5:2005 Free-standing chimneys — Part 5: Material for brick liners — Product specifications |
|
1.4.2006 |
1.4.2007 |
|
|
EN 13084-5:2005/AC:2006 |
|
1.1.2007 |
1.1.2007 |
|
CEN |
EN 13084-7:2012 Free-standing chimneys — Part 7: Product specifications of cylindrical steel fabrications for use in single wall steel chimneys and steel liners |
EN 13084-7:2005 |
1.9.2013 |
1.9.2013 |
|
CEN |
EN 13101:2002 Steps for underground man entry chambers — Requirements, marking, testing and evaluation of conformity |
|
1.8.2003 |
1.8.2004 |
|
CEN |
EN 13108-1:2006 Bituminous mixtures — Material specifications — Part 1: Asphalt Concrete |
|
1.3.2007 |
1.3.2008 |
|
|
EN 13108-1:2006/AC:2008 |
|
1.1.2009 |
1.1.2009 |
|
CEN |
EN 13108-2:2006 Bituminous mixtures — Material specifications — Part 2: Asphalt Concrete for very thin layers |
|
1.3.2007 |
1.3.2008 |
|
|
EN 13108-2:2006/AC:2008 |
|
1.1.2009 |
1.1.2009 |
|
CEN |
EN 13108-3:2006 Bituminous mixtures — Material specifications — Part 3: Soft Asphalt |
|
1.3.2007 |
1.3.2008 |
|
|
EN 13108-3:2006/AC:2008 |
|
1.1.2009 |
1.1.2009 |
|
CEN |
EN 13108-4:2006 Bituminous mixtures — Material specifications — Part 4: Hot Rolled Asphalt |
|
1.3.2007 |
1.3.2008 |
|
|
EN 13108-4:2006/AC:2008 |
|
1.1.2009 |
1.1.2009 |
|
CEN |
EN 13108-5:2006 Bituminous mixtures — Material specifications — Part 5: Stone Mastic Asphalt |
|
1.3.2007 |
1.3.2008 |
|
|
EN 13108-5:2006/AC:2008 |
|
1.1.2009 |
1.1.2009 |
|
CEN |
EN 13108-6:2006 Bituminous mixtures — Material specifications — Part 6: Mastic Asphalt |
|
1.3.2007 |
1.3.2008 |
|
|
EN 13108-6:2006/AC:2008 |
|
1.1.2009 |
1.1.2009 |
|
CEN |
EN 13108-7:2006 Bituminous mixtures — Material specifications — Part 7: Porous Asphalt |
|
1.3.2007 |
1.3.2008 |
|
|
EN 13108-7:2006/AC:2008 |
|
1.1.2009 |
1.1.2009 |
|
CEN |
EN 13139:2002 Aggregates for mortar |
|
1.3.2003 |
1.6.2004 |
|
|
EN 13139:2002/AC:2004 |
|
1.1.2010 |
1.1.2010 |
|
CEN |
EN 13160-1:2003 Leak detection systems — Part 1: General principles |
|
1.3.2004 |
1.3.2005 |
|
CEN |
EN 13162:2012+A1:2015 Thermal insulation products for buildings — Factory made mineral wool (MW) products — Specification |
EN 13162:2012 |
10.7.2015 |
10.7.2016 |
|
CEN |
EN 13163:2012+A1:2015 Thermal insulation products for buildings — Factory made expanded polystyrene (EPS) products — Specification |
EN 13163:2012 |
10.7.2015 |
10.7.2016 |
|
CEN |
EN 13164:2012+A1:2015 Thermal insulation products for buildings — Factory made extruded polystyrene foam (XPS) products — Specification |
EN 13164:2012 |
10.7.2015 |
10.7.2016 |
|
CEN |
EN 13165:2012+A2:2016 Thermal insulation products for buildings — Factory made rigid polyurethane foam (PU) products — Specification |
EN 13165:2012+A1:2015 |
14.10.2016 |
14.10.2017 |
|
CEN |
EN 13166:2012+A2:2016 Thermal insulation products for buildings — Factory made phenolic foam (PF) products — Specification |
EN 13166:2012+A1:2015 |
14.10.2016 |
14.10.2017 |
|
CEN |
EN 13167:2012+A1:2015 Thermal insulation products for buildings — Factory made cellular glass (CG) products — Specification |
EN 13167:2012 |
10.7.2015 |
10.7.2016 |
|
CEN |
EN 13168:2012+A1:2015 Thermal insulation products for buildings — Factory made wood wool (WW) products — Specification |
EN 13168:2012 |
10.7.2015 |
10.7.2016 |
|
CEN |
EN 13169:2012+A1:2015 Thermal insulation products for buildings — Factory made expanded perlite board (EPB) products — Specification |
EN 13169:2012 |
10.7.2015 |
10.7.2016 |
|
CEN |
EN 13170:2012+A1:2015 Thermal insulation products for buildings — Factory made products of expanded cork (ICB) — Specification |
EN 13170:2012 |
10.7.2015 |
10.7.2016 |
|
CEN |
EN 13171:2012+A1:2015 Thermal insulation products for buildings — Factory made wood fibre (WF) products — Specification |
EN 13171:2012 |
10.7.2015 |
10.7.2016 |
|
CEN |
EN 13224:2011 Precast concrete products — Ribbed floor elements |
EN 13224:2004+A1:2007 |
1.8.2012 |
1.8.2013 |
|
CEN |
EN 13225:2013 Precast concrete products — Linear structural elements |
EN 13225:2004 |
8.8.2014 |
8.8.2015 |
|
CEN |
EN 13229:2001 Inset appliances including open fires fired by solid fuels — Requirements and test methods |
|
1.7.2005 |
1.7.2007 |
|
|
EN 13229:2001/AC:2006 |
|
1.7.2007 |
1.7.2007 |
|
|
EN 13229:2001/A2:2004/AC:2007 |
|
1.1.2008 |
1.1.2008 |
|
|
EN 13229:2001/A2:2004 |
|
1.7.2005 |
1.7.2007 |
|
|
EN 13229:2001/A1:2003 |
|
1.6.2006 |
1.6.2007 |
|
CEN |
EN 13240:2001 Roomheaters fired by solid fuel — Requirements and test methods |
|
1.7.2005 |
1.7.2007 |
|
|
EN 13240:2001/A2:2004 |
|
1.7.2005 |
1.7.2007 |
|
|
EN 13240:2001/AC:2006 |
|
1.1.2007 |
1.1.2007 |
|
|
EN 13240:2001/A2:2004/AC:2007 |
|
1.1.2008 |
1.1.2008 |
|
CEN |
EN 13241:2003+A2:2016 Industrial, commercial, garage doors and gates — Product standard, performance characteristics |
EN 13241-1:2003+A1:2011 |
1.11.2016 |
1.11.2019 |
|
CEN |
EN 13242:2002+A1:2007 Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction |
EN 13242:2002 |
1.1.2009 |
1.1.2010 |
|
CEN |
EN 13245-2:2008 Plastics — Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications — Part 2: PVC-U profiles and PVC-UE profiles for internal and external wall and ceiling finishes |
|
1.7.2010 |
1.7.2012 |
|
|
EN 13245-2:2008/AC:2009 |
|
1.7.2010 |
1.7.2010 |
|
CEN |
EN 13249:2016 Geotextiles and geotextile-related products — Characteristics required for use in the construction of roads and other trafficked areas (excluding railways and asphalt inclusion) |
EN 13249:2000+A1:2015 |
10.3.2017 |
10.3.2018 |
|
CEN |
EN 13250:2016 Geotextiles and geotextile-related products — Characteristics required for use in the construction of railways |
EN 13250:2000+A1:2015 |
10.3.2017 |
10.3.2018 |
|
CEN |
EN 13251:2016 Geotextiles and geotextile-related products — Characteristics required for use in earthworks, foundations and retaining structures |
EN 13251:2000+A1:2015 |
10.3.2017 |
10.3.2018 |
|
CEN |
EN 13252:2016 Geotextiles and geotextile-related products — Characteristics required for use in drainage systems |
EN 13252:2000+A1:2015 |
10.3.2017 |
10.3.2018 |
|
CEN |
EN 13253:2016 Geotextiles and geotextile-related products — Characteristics required for use in erosion control works (coastal protection, bank revetments) |
EN 13253:2000+A1:2015 |
10.3.2017 |
10.3.2018 |
|
CEN |
EN 13254:2016 Geotextiles and geotextile-related products — Characteristics required for the use in the construction of reservoirs and dams |
EN 13254:2000+A1:2005+AC:2003 |
10.3.2017 |
10.3.2018 |
|
CEN |
EN 13255:2016 Geotextiles and geotextile-related products — Characteristics required for use in the construction of canals |
EN 13255:2000+A1:2005+AC:2003 |
10.3.2017 |
10.3.2018 |
|
CEN |
EN 13256:2016 Geotextiles and geotextile-related products — Characteristics required for use in the construction of tunnels and underground structures |
EN 13256:2000+A1:2005+AC:2003 |
10.3.2017 |
10.3.2018 |
|
CEN |
EN 13257:2016 Geotextiles and geotextile-related products — Characteristics required for use in solid waste disposals |
EN 13257:2000+A1:2005+AC:2003 |
10.3.2017 |
10.3.2018 |
|
CEN |
EN 13263-1:2005+A1:2009 Silica fume for concrete — Part 1: Definitions, requirements and conformity criteria |
EN 13263-1:2005 |
1.1.2010 |
1.1.2011 |
|
CEN |
EN 13265:2016 Geotextiles and geotextile-related products — Characteristics required for use in liquid waste containment projects |
EN 13265:2000+A1:2005+AC:2003 |
10.3.2017 |
10.3.2018 |
|
CEN |
EN 13279-1:2008 Gypsum binders and gypsum plasters — Part 1: Definitions and requirements |
EN 13279-1:2005 |
1.10.2009 |
1.10.2010 |
|
CEN |
EN 13282-1:2013 Hydraulic road binders — Part 1: Rapid hardening hydraulic road binders — Composition, specifications and conformity criteria |
|
1.11.2013 |
1.11.2014 |
|
CEN |
EN 13310:2003 Kitchen sinks — Functional requirements and test methods |
|
1.2.2004 |
1.2.2006 |
|
CEN |
EN 13341:2005+A1:2011 Static thermoplastic tanks for above ground storage of domestic heating oils, kerosene and diesel fuels — Blow moulded and rotationally moulded polyethylene tanks and rotationally moulded tanks made of anionically polymerized polyamide 6 — Requirements and test methods |
EN 13341:2005 |
1.10.2011 |
1.10.2011 |
|
CEN |
EN 13361:2004 Geosynthetic barriers — Characteristics required for use in the construction of reservoirs and dams |
|
1.9.2005 |
1.9.2006 |
|
|
EN 13361:2004/A1:2006 |
|
1.6.2007 |
1.6.2008 |
|
CEN |
EN 13362:2005 Geosynthetic Barriers — Characteristics required for use in the construction of canals |
|
1.2.2006 |
1.2.2007 |
|
CEN |
EN 13383-1:2002 Armourstone — Part 1: Specification |
|
1.3.2003 |
1.6.2004 |
|
|
EN 13383-1:2002/AC:2004 |
|
1.1.2010 |
1.1.2010 |
|
The threshold level for density set in Clause 5.2 (of EN 13383-1:2002) is excluded from the scope of the reference. (COM Decision 2016/1610/EC) |
||||
|
CEN |
EN 13407:2006 Wall-hung urinals — Functional requirements and test methods |
|
1.1.2008 |
1.1.2009 |
|
CEN |
EN 13450:2002 Aggregates for railway ballast |
|
1.10.2003 |
1.6.2004 |
|
|
EN 13450:2002/AC:2004 |
|
1.1.2007 |
1.1.2007 |
|
CEN |
EN 13454-1:2004 Binders, composite binders and factory made mixtures for floor screeds based on calcium sulfate — Part 1: Definitions and requirements |
|
1.7.2005 |
1.7.2006 |
|
CEN |
EN 13479:2004 Welding consumables — General product standard for filler metals and fluxes for fusion welding of metallic materials |
|
1.10.2005 |
1.10.2006 |
|
CEN |
EN 13491:2004 Geosynthetic barriers — Characteristics required for use as a fluid barrier in the construction of tunnels and underground structures |
|
1.9.2005 |
1.9.2006 |
|
|
EN 13491:2004/A1:2006 |
|
1.6.2007 |
1.6.2008 |
|
CEN |
EN 13492:2004 Geosynthetic barriers — Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment |
|
1.9.2005 |
1.9.2006 |
|
|
EN 13492:2004/A1:2006 |
|
1.6.2007 |
1.6.2008 |
|
CEN |
EN 13493:2005 Geosynthetic barriers — Characteristics required for use in the construction of solid waste storage and disposal sites |
|
1.3.2006 |
1.3.2007 |
|
CEN |
EN 13502:2002 Chimneys — Requirements and test methods for clay/ceramic flue terminals |
|
1.8.2003 |
1.8.2004 |
|
CEN |
EN 13561:2004+A1:2008 External blinds — Performance requirements including safety |
EN 13561:2004 |
1.8.2009 |
1.8.2010 |
|
CEN |
EN 13564-1:2002 Anti-flooding devices for buildings — Part 1: Requirements |
|
1.5.2003 |
1.5.2004 |
|
CEN |
EN 13616:2004 Overfill prevention devices for static tanks for liquid petroleum fuels |
|
1.5.2005 |
1.5.2006 |
|
|
EN 13616:2004/AC:2006 |
|
1.6.2006 |
1.6.2006 |
|
CEN |
EN 13658-1:2005 Metal lath and beads — Definitions, requirements and test methods — Part 1: Internal plastering |
|
1.3.2006 |
1.3.2007 |
|
CEN |
EN 13658-2:2005 Metal lath and beads — Definitions, requirements and test methods — Part 2: External rendering |
|
1.3.2006 |
1.3.2007 |
|
CEN |
EN 13659:2004+A1:2008 Shutters — Performance requirements including safety |
EN 13659:2004 |
1.8.2009 |
1.8.2010 |
|
CEN |
EN 13693:2004+A1:2009 Precast concrete products — Special roof elements |
EN 13693:2004 |
1.5.2010 |
1.5.2011 |
|
CEN |
EN 13707:2004+A2:2009 Flexible sheets for waterproofing — Reinforced bitumen sheets for roof waterproofing — Definitions and characteristics |
|
1.4.2010 |
1.10.2010 |
|
CEN |
EN 13747:2005+A2:2010 Precast concrete products — Floor plates for floor systems |
EN 13747:2005+A1:2008 |
1.1.2011 |
1.1.2011 |
|
CEN |
EN 13748-1:2004 Terrazzo tiles — Part 1: Terrazzo tiles for internal use |
|
1.6.2005 |
1.10.2006 |
|
|
EN 13748-1:2004/A1:2005 |
|
1.4.2006 |
1.10.2006 |
|
|
EN 13748-1:2004/AC:2005 |
|
1.6.2005 |
1.6.2005 |
|
CEN |
EN 13748-2:2004 Terrazzo tiles — Part 2: Terrazzo tiles for external use |
|
1.4.2005 |
1.4.2006 |
|
CEN |
EN 13808:2013 Bitumen and bituminous binders — Framework for specifying cationic bituminous emulsions |
EN 13808:2005 |
8.8.2014 |
8.8.2015 |
|
CEN |
EN 13813:2002 Screed material and floor screeds — Screed material — Properties and requirements |
|
1.8.2003 |
1.8.2004 |
|
CEN |
EN 13815:2006 Fibrous gypsum plaster casts — Definitions, requirements and test methods |
|
1.6.2007 |
1.6.2008 |
|
CEN |
EN 13830:2003 Curtain walling — Product standard |
|
1.12.2004 |
1.12.2005 |
|
CEN |
EN 13859-1:2010 Flexible sheets for waterproofing — Definitions and characteristics of underlays — Part 1: Underlays for discontinuous roofing |
|
1.4.2011 |
1.4.2012 |
|
CEN |
EN 13859-2:2010 Flexible sheets for waterproofing — Definitions and characteristics of underlays — Part 2: Underlays for walls |
|
1.4.2011 |
1.4.2012 |
|
CEN |
EN 13877-3:2004 Concrete pavements — Part 3: Specifications for dowels to be used in concrete pavements |
|
1.9.2005 |
1.9.2006 |
|
CEN |
EN 13915:2007 Prefabricated gypsum plasterboard panels with a cellular paperboard core — Definitions, requirements and test methods |
|
1.6.2008 |
1.6.2009 |
|
CEN |
EN 13924:2006 Bitumen and bituminous binders — Specifications for hard paving grade bitumens |
|
1.1.2010 |
1.1.2011 |
|
|
EN 13924:2006/AC:2006 |
|
1.1.2010 |
1.1.2010 |
|
CEN |
EN 13950:2014 Gypsum board thermal/acoustic insulation composite panels — Definitions, requirements and test methods |
EN 13950:2005 |
13.2.2015 |
13.2.2016 |
|
CEN |
EN 13956:2012 Flexible sheets for waterproofing — Plastic and rubber sheets for roof waterproofing — Definitions and characteristics |
EN 13956:2005 |
1.10.2013 |
1.10.2013 |
|
CEN |
EN 13963:2005 Jointing materials for gypsum plasterboards — Definitions, requirements and test methods |
|
1.3.2006 |
1.3.2007 |
|
|
EN 13963:2005/AC:2006 |
|
1.1.2007 |
1.1.2007 |
|
CEN |
EN 13964:2014 Suspended ceilings — Requirements and test methods |
EN 13964:2004 |
8.4.2016 |
8.4.2017 |
|
CEN |
EN 13967:2012 Flexible sheets for waterproofing — Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet — Definitions and characteristics |
EN 13967:2004 |
1.3.2013 |
1.7.2013 |
|
CEN |
EN 13969:2004 Flexible sheets for waterproofing — Bitumen damp proof sheets including bitumen basement tanking sheets — Definitions and characteristics |
|
1.9.2005 |
1.9.2006 |
|
|
EN 13969:2004/A1:2006 |
|
1.1.2008 |
1.1.2009 |
|
CEN |
EN 13970:2004 Flexible sheets for waterproofing — Bitumen water vapour control layers — Definitions and characteristics |
|
1.9.2005 |
1.9.2006 |
|
|
EN 13970:2004/A1:2006 |
|
1.1.2008 |
1.1.2009 |
|
CEN |
EN 13978-1:2005 Precast concrete products — Precast concrete garages — Part 1: Requirements for reinforced garages monolithic or consisting of single sections with room dimensions |
|
1.3.2006 |
1.3.2008 |
|
CEN |
EN 13984:2013 Flexible sheets for waterproofing — Plastic and rubber vapour control layers — Definitions and characteristics |
EN 13984:2004 |
1.11.2013 |
1.11.2013 |
|
CEN |
EN 13986:2004+A1:2015 Wood-based panels for use in construction — Characteristics, evaluation of conformity and marking |
EN 13986:2004 |
13.11.2015 |
13.11.2016 |
|
CEN |
EN 14016-1:2004 Binders for magnesite screeds — Caustic magnesia and magnesium chloride — Part 1: Definitions, requirements |
|
1.12.2004 |
1.12.2005 |
|
CEN |
EN 14023:2010 Bitumen and bituminous binders — Specification framework for polymer modified bitumens |
|
1.1.2011 |
1.1.2012 |
|
CEN |
EN 14037-1:2016 Free hanging heating and cooling surfaces for water with a temperature below 120 oC — Part 1: Pre-fabricated ceiling mounted radiant panels for space heating — Technical specifications and requirements |
EN 14037-1:2003 |
10.3.2017 |
10.3.2018 |
|
CEN |
EN 14041:2004 Resilient, textile and laminate floor coverings — Essential characteristics |
|
1.1.2006 |
1.1.2007 |
|
|
EN 14041:2004/AC:2006 |
|
1.1.2007 |
1.1.2007 |
|
CEN |
EN 14055:2010 WC and urinal flushing cisterns |
|
1.9.2011 |
1.9.2012 |
|
CEN |
EN 14063-1:2004 Thermal insulation products for buildings — In-situ formed expanded clay lightweight aggregate products — Part 1: Specification for the loose-fill products before installation |
|
1.6.2005 |
1.6.2006 |
|
|
EN 14063-1:2004/AC:2006 |
|
1.1.2008 |
1.1.2008 |
|
CEN |
EN 14064-1:2010 Thermal insulation products for buildings — In-situ formed loose-fill mineral wool (MW) products — Part 1: Specification for the loose-fill products before installation |
|
1.12.2010 |
1.12.2011 |
|
CEN |
EN 14080:2013 Timber structures — Glued laminated timber and glued solid timber — Requirements |
EN 14080:2005 |
8.8.2014 |
8.8.2015 |
|
CEN |
EN 14081-1:2005+A1:2011 Timber structures — Strength graded structural timber with rectangular cross section — Part 1: General requirements |
EN 14081-1:2005 |
1.10.2011 |
31.12.2011 |
|
CEN |
EN 14178-2:2004 Glass in building — Basic alkaline earth silicate glass products — Part 2: Evaluation of conformity/Product standard |
|
1.9.2005 |
1.9.2006 |
|
CEN |
EN 14179-2:2005 Glass in building — Heat soaked thermally toughened soda lime silicate safety glass — Part 2: Evaluation of conformity/Product standard |
|
1.3.2006 |
1.3.2007 |
|
CEN |
EN 14188-1:2004 Joint fillers and sealants — Part 1: Specifications for hot applied sealants |
|
1.7.2005 |
1.1.2007 |
|
CEN |
EN 14188-2:2004 Joint fillers and sealants — Part 2: Specifications for cold applied sealants |
|
1.10.2005 |
1.1.2007 |
|
CEN |
EN 14188-3:2006 Joint fillers and sealants — Part 3: Specifications for preformed joint seals |
|
1.11.2006 |
1.11.2007 |
|
CEN |
EN 14190:2014 Gypsum board products from reprocessing — Definitions, requirements and test methods |
EN 14190:2005 |
13.2.2015 |
13.2.2016 |
|
CEN |
EN 14195:2005 Metal framing components for gypsum plasterboard systems — Definitions, requirements and test methods |
|
1.1.2006 |
1.1.2007 |
|
|
EN 14195:2005/AC:2006 |
|
1.1.2007 |
1.1.2007 |
|
CEN |
EN 14209:2005 Preformed plasterboard cornices — Definitions, requirements and test methods |
|
1.9.2006 |
1.9.2007 |
|
CEN |
EN 14216:2015 Cement — Composition, specifications and conformity criteria for very low heat special cements |
EN 14216:2004 |
8.4.2016 |
8.4.2017 |
|
CEN |
EN 14229:2010 Structural timber — Wood poles for overhead lines |
|
1.9.2011 |
1.9.2012 |
|
CEN |
EN 14246:2006 Gypsum elements for suspended ceilings — Definitions, requirements and test methods |
|
1.4.2007 |
1.4.2008 |
|
|
EN 14246:2006/AC:2007 |
|
1.1.2008 |
1.1.2008 |
|
CEN |
EN 14250:2010 Timber structures — Product requirements for prefabricated structural members assembled with punched metal plate fasteners |
EN 14250:2004 |
1.11.2010 |
1.11.2010 |
|
CEN |
EN 14296:2005 Sanitary appliances — Communal washing troughs |
|
1.3.2006 |
1.3.2008 |
|
CEN |
EN 14303:2009+A1:2013 Thermal insulation products for building equipment and industrial installations — Factory made mineral wool (MW) products — Specification |
EN 14303:2009 |
1.11.2013 |
1.11.2013 |
|
CEN |
EN 14304:2009+A1:2013 Thermal insulation products for building equipment and industrial installations — Factory made flexible elastomeric foam (FEF) products — Specification |
EN 14304:2009 |
1.11.2013 |
1.11.2013 |
|
CEN |
EN 14305:2009+A1:2013 Thermal insulation products for building equipment and industrial installations — Factory made cellular glass (CG) products — Specification |
EN 14305:2009 |
1.11.2013 |
1.11.2013 |
|
CEN |
EN 14306:2009+A1:2013 Thermal insulation products for building equipment and industrial installations — Factory made calcium silicate (CS) products — Specification |
EN 14306:2009 |
1.11.2013 |
1.11.2013 |
|
CEN |
EN 14307:2009+A1:2013 Thermal insulation products for building equipment and industrial installations — Factory made extruded polystyrene foam (XPS) products — Specification |
EN 14307:2009 |
1.11.2013 |
1.11.2013 |
|
CEN |
EN 14308:2009+A1:2013 Thermal insulation products for building equipment and industrial installations — Factory made rigid polyurethane foam (PUR) and polyisocyanurate foam (PIR) products — Specification |
EN 14308:2009 |
1.11.2013 |
1.11.2013 |
|
CEN |
EN 14309:2009+A1:2013 Thermal insulation products for building equipment and industrial installations — Factory made products of expanded polystyrene (EPS) — Specification |
EN 14309:2009 |
1.11.2013 |
1.11.2013 |
|
CEN |
EN 14313:2009+A1:2013 Thermal insulation products for building equipment and industrial installations — Factory made polyethylene foam (PEF) products — Specification |
EN 14313:2009 |
1.11.2013 |
1.11.2013 |
|
CEN |
EN 14314:2009+A1:2013 Thermal insulation products for building equipment and industrial installations — Factory made phenolic foam (PF) products — Specification |
EN 14314:2009 |
1.11.2013 |
1.11.2013 |
|
CEN |
EN 14315-1:2013 Thermal insulating products for buildings — In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products — Part 1: Specification for the rigid foam spray system before installation |
|
1.11.2013 |
1.11.2014 |
|
CEN |
EN 14316-1:2004 Thermal insulation products for buildings — In-situ thermal insulation formed from expanded perlite (EP) products — Part 1: Specification for bonded and loose-fill products before installation |
|
1.6.2005 |
1.6.2006 |
|
CEN |
EN 14317-1:2004 Thermal insulation products for buildings — In-situ thermal insulation formed from exfoliated vermiculite (EV) products — Part 1: Specification for bonded and loose-fill products before installation |
|
1.6.2005 |
1.6.2006 |
|
CEN |
EN 14318-1:2013 Thermal insulating products for buildings — In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products — Part 1: Specification for the rigid foam dispensed system before installation |
|
1.11.2013 |
1.11.2014 |
|
CEN |
EN 14319-1:2013 Thermal insulating products for building equipment and industrial installations — In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate foam (PIR) products — Part 1: Specification for the rigid foam dispensed system before installation |
|
1.11.2013 |
1.11.2014 |
|
CEN |
EN 14320-1:2013 Thermal insulating products for building equipment and industrial installations — In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate foam (PIR) products — Part 1: Specification for the rigid foam spray system before installation |
|
1.11.2013 |
1.11.2014 |
|
CEN |
EN 14321-2:2005 Glass in building — Thermally toughened alkaline earth silicate safety glass — Part 2: Evaluation of conformity/Product standard |
|
1.6.2006 |
1.6.2007 |
|
CEN |
EN 14339:2005 Underground fire hydrants |
|
1.5.2006 |
1.5.2007 |
|
CEN |
EN 14342:2013 Wood flooring and parquet — Characteristics, evaluation of conformity and marking |
EN 14342:2005+A1:2008 |
8.8.2014 |
8.8.2015 |
|
Clause 4.4 of standard EN 14342:2013 is excluded from the scope of the reference published. |
||||
|
CEN |
EN 14351-1:2006+A2:2016 Windows and doors — Product standard, performance characteristics — Part 1: Windows and external pedestrian doorsets |
EN 14351-1:2006+A1:2010 |
1.11.2016 |
1.11.2019 |
|
The sentence regarding ‘ability to release’ in Clause 1, Scope (of EN 14351-1:2006+A2:2016) is excluded from the scope of the reference. |
||||
|
CEN |
EN 14353:2007+A1:2010 Metal beads and feature profiles for use with gypsum plasterboards — Definitions, requirements and test methods |
EN 14353:2007 |
1.11.2010 |
1.11.2010 |
|
CEN |
EN 14374:2004 Timber structures — Structural laminated veneer lumber — Requirements |
|
1.9.2005 |
1.9.2006 |
|
CEN |
EN 14384:2005 Pillar fire hydrants |
|
1.5.2006 |
1.5.2007 |
|
CEN |
EN 14388:2005 Road traffic noise reducing devices — Specifications |
|
1.5.2006 |
1.5.2007 |
|
|
EN 14388:2005/AC:2008 |
|
1.1.2009 |
1.1.2009 |
|
CEN |
EN 14396:2004 Fixed ladders for manholes |
|
1.12.2004 |
1.12.2005 |
|
CEN |
EN 14399-1:2015 High-strength structural bolting assemblies for preloading — Part 1: General requirements |
EN 14399-1:2005 |
8.4.2016 |
8.4.2017 |
|
CEN |
EN 14411:2012 Ceramic tiles — Definitions, classification, characteristics, evaluation of conformity and marking |
EN 14411:2006 |
1.7.2013 |
1.7.2014 |
|
CEN |
EN 14428:2004+A1:2008 Shower enclosures — Functional requirements and test methods |
EN 14428:2004 |
1.1.2009 |
1.1.2010 |
|
CEN |
EN 14449:2005 Glass in building — Laminated glass and laminated safety glass — Evaluation of conformity/Product standard |
|
1.3.2006 |
1.3.2007 |
|
|
EN 14449:2005/AC:2005 |
|
1.6.2006 |
1.6.2006 |
|
CEN |
EN 14471:2013+A1:2015 Chimneys — System chimneys with plastic flue liners — Requirements and test methods |
EN 14471:2013 |
10.7.2015 |
10.7.2016 |
|
CEN |
EN 14496:2005 Gypsum based adhesives for thermal/acoustic insulation composite panels and plasterboards — Definitions, requirements and test methods |
|
1.9.2006 |
1.9.2007 |
|
CEN |
EN 14509:2013 Self-supporting double skin metal faced insulating panels — Factory made products — Specifications |
EN 14509:2006 |
8.8.2014 |
8.8.2015 |
|
CEN |
EN 14516:2006+A1:2010 Baths for domestic purposes |
|
1.5.2011 |
1.5.2012 |
|
CEN |
EN 14527:2006+A1:2010 Shower trays for domestic purposes |
|
1.5.2011 |
1.5.2012 |
|
CEN |
EN 14528:2007 Bidets — Functional requirements and test methods |
EN 14528:2005 |
1.1.2008 |
1.1.2009 |
|
CEN |
EN 14545:2008 Timber structures — Connectors — Requirements |
|
1.8.2009 |
1.8.2010 |
|
CEN |
EN 14566:2008+A1:2009 Mechanical fasteners for gypsum plasterboard systems — Definitions, requirements and test methods |
EN 14566:2008 |
1.5.2010 |
1.11.2010 |
|
CEN |
EN 14592:2008+A1:2012 Timber structures — Dowel-type fasteners — Requirements |
EN 14592:2008 |
1.3.2013 |
1.7.2013 |
|
CEN |
EN 14604:2005 Smoke alarm devices |
|
1.5.2006 |
1.8.2008 |
|
|
EN 14604:2005/AC:2008 |
|
1.8.2009 |
1.8.2009 |
|
CEN |
EN 14647:2005 Calcium aluminate cement — Composition, specifications and conformity criteria |
|
1.8.2006 |
1.8.2007 |
|
|
EN 14647:2005/AC:2006 |
|
1.1.2008 |
1.1.2008 |
|
CEN |
EN 14680:2006 Adhesives for non-pressure thermoplastic piping systems — Specifications |
|
1.1.2008 |
1.1.2009 |
|
CEN |
EN 14688:2006 Sanitary appliances — Wash basins — Functional requirements and test methods |
|
1.1.2008 |
1.1.2009 |
|
CEN |
EN 14695:2010 Flexible sheets for waterproofing — Reinforced bitumen sheets for waterproofing of concrete bridge decks and other trafficked areas of concrete — Definitions and characteristics |
|
1.10.2010 |
1.10.2011 |
|
CEN |
EN 14716:2004 Stretched ceilings — Requirements and test methods |
|
1.10.2005 |
1.10.2006 |
|
CEN |
EN 14782:2006 Self-supporting metal sheet for roofing, external cladding and internal lining — Product specification and requirements |
|
1.11.2006 |
1.11.2007 |
|
CEN |
EN 14783:2013 Fully supported metal sheet and strip for roofing, external cladding and internal lining — Product specification and requirements |
EN 14783:2006 |
8.8.2014 |
8.8.2015 |
|
CEN |
EN 14785:2006 Residential space heating appliances fired by wood pellets — Requirements and test methods |
|
1.1.2010 |
1.1.2011 |
|
CEN |
EN 14800:2007 Corrugated safety metal hose assemblies for the connection of domestic appliances using gaseous fuels |
|
1.1.2008 |
1.1.2009 |
|
CEN |
EN 14814:2007 Adhesives for thermoplastic piping systems for fluids under pressure — Specifications |
|
1.1.2008 |
1.1.2009 |
|
CEN |
EN 14843:2007 Precast concrete products — Stairs |
|
1.1.2008 |
1.1.2009 |
|
CEN |
EN 14844:2006+A2:2011 Precast concrete products — Box culverts |
EN 14844:2006+A1:2008 |
1.9.2012 |
1.9.2013 |
|
CEN |
EN 14846:2008 Building hardware — Locks and latches — Electromechanically operated locks and striking plates — Requirements and test methods |
|
1.9.2011 |
1.9.2012 |
|
CEN |
EN 14889-1:2006 Fibres for concrete — Part 1: Steel fibres — Definitions, specifications and conformity |
|
1.6.2007 |
1.6.2008 |
|
CEN |
EN 14889-2:2006 Fibres for concrete — Part 2: Polymer fibres — Definitions, specifications and conformity |
|
1.6.2007 |
1.6.2008 |
|
CEN |
EN 14891:2012 Liquid-applied water impermeable products for use beneath ceramic tiling bonded with adhesives — Requirements, test methods, evaluation of conformity, classification and designation |
|
1.3.2013 |
1.3.2014 |
|
|
EN 14891:2012/AC:2012 |
|
1.3.2013 |
1.3.2013 |
|
CEN |
EN 14904:2006 Surfaces for sports areas — Indoor surfaces for multi-sports use — Specification |
|
1.2.2007 |
1.2.2008 |
|
Note 1 of Annex ZA.1 to standard EN 14904:2006 is excluded from the scope of the reference published. |
||||
|
CEN |
EN 14909:2012 Flexible sheets for waterproofing — Plastic and rubber damp proof courses — Definitions and characteristics |
EN 14909:2006 |
1.3.2013 |
1.7.2013 |
|
CEN |
EN 14915:2013 Solid wood panelling and cladding — Characteristics, evaluation of conformity and marking |
EN 14915:2006 |
8.8.2014 |
8.8.2015 |
|
CEN |
EN 14933:2007 Thermal insulation and light weight fill products for civil engineering applications — Factory made products of expanded polystyrene (EPS) — Specification |
|
1.7.2008 |
1.7.2009 |
|
CEN |
EN 14934:2007 Thermal insulation and light weight fill products for civil engineering applications — Factory made products of extruded polystyrene foam (XPS) — Specification |
|
1.7.2008 |
1.7.2009 |
|
CEN |
EN 14963:2006 Roof coverings — Continuous rooflights of plastics with or without upstands — Classification, requirements and test methods |
|
1.8.2009 |
1.8.2012 |
|
CEN |
EN 14964:2006 Rigid underlays for discontinuous roofing — Definitions and characteristics |
|
1.1.2008 |
1.1.2009 |
|
CEN |
EN 14967:2006 Flexible sheets for waterproofing — Bitumen damp proof courses — Definitions and characteristics |
|
1.3.2007 |
1.3.2008 |
|
CEN |
EN 14989-1:2007 Chimneys — Requirements and test methods for metal chimneys and material independent air supply ducts for roomsealed heating applications — Part 1: Vertical air/flue terminals for C6-type appliances |
|
1.1.2008 |
1.1.2009 |
|
CEN |
EN 14989-2:2007 Chimneys — Requirements and test methods for metal chimneys and material independent air supply ducts for roomsealed heating applications — Part 2: Flue and air supply ducts for room sealed appliances |
|
1.1.2009 |
1.1.2010 |
|
CEN |
EN 14991:2007 Precast concrete products — Foundation elements |
|
1.1.2008 |
1.1.2009 |
|
CEN |
EN 14992:2007+A1:2012 Precast concrete products — Wall elements |
EN 14992:2007 |
1.4.2013 |
1.7.2013 |
|
CEN |
EN 15037-1:2008 Precast concrete products — Beam-and-block floor systems — Part 1: Beams |
|
1.1.2010 |
1.1.2011 |
|
CEN |
EN 15037-2:2009+A1:2011 Precast concrete products — Beam-and-block floor systems — Part 2: Concrete blocks |
|
1.12.2011 |
1.12.2012 |
|
CEN |
EN 15037-3:2009+A1:2011 Precast concrete products — Beam-and-block floor systems — Part 3: Clay blocks |
|
1.12.2011 |
1.12.2012 |
|
CEN |
EN 15037-4:2010+A1:2013 Precast concrete products — Beam-and-block floor systems — Part 4: Expanded polystyrene blocks |
EN 15037-4:2010 |
8.8.2014 |
8.8.2015 |
|
CEN |
EN 15037-5:2013 Precast concrete products — Beam-and-block floor systems — Part 5: Lightweight blocks for simple formwork |
|
8.8.2014 |
8.8.2015 |
|
CEN |
EN 15048-1:2007 Non-preloaded structural bolting assemblies — Part 1: General requirements |
|
1.1.2008 |
1.10.2009 |
|
CEN |
EN 15050:2007+A1:2012 Precast concrete products — Bridge elements |
EN 15050:2007 |
1.12.2012 |
1.12.2012 |
|
CEN |
EN 15069:2008 Safety gas connection valves for metal hose assemblies used for the connection of domestic appliances using gaseous fuel |
|
1.1.2009 |
1.1.2010 |
|
CEN |
EN 15088:2005 Aluminium and aluminium alloys — Structural products for construction works — Technical conditions for inspection and delivery |
|
1.10.2006 |
1.10.2007 |
|
CEN |
EN 15102:2007+A1:2011 Decorative wall coverings — Roll and panel form |
EN 15102:2007 |
1.7.2012 |
1.7.2012 |
|
CEN |
EN 15129:2009 Anti-seismic devices |
|
1.8.2010 |
1.8.2011 |
|
CEN |
EN 15167-1:2006 Ground granulated blast furnace slag for use in concrete, mortar and grout — Part 1: Definitions, specifications and conformity criteria |
|
1.1.2008 |
1.1.2009 |
|
CEN |
EN 15250:2007 Slow heat release appliances fired by solid fuel — Requirements and test methods |
|
1.1.2008 |
1.1.2010 |
|
CEN |
EN 15258:2008 Precast concrete products — Retaining wall elements |
|
1.1.2010 |
1.1.2011 |
|
CEN |
EN 15274:2015 General purpose adhesives for structural assembly — Requirements and test methods |
EN 15274:2007 |
13.11.2015 |
13.11.2016 |
|
CEN |
EN 15275:2015 Structural adhesives — Characterisation of anaerobic adhesives for co-axial metallic assembly in building and civil engineering structures |
EN 15275:2007 |
13.11.2015 |
13.11.2016 |
|
CEN |
EN 15283-1:2008+A1:2009 Gypsum boards with fibrous reinforcement — Definitions, requirements and test methods — Part 1: Gypsum boards with mat reinforcement |
EN 15283-1:2008 |
1.6.2010 |
1.6.2011 |
|
CEN |
EN 15283-2:2008+A1:2009 Gypsum boards with fibrous reinforcement — Definitions, requirements and test methods — Part 2: Gypsum fibre boards |
EN 15283-2:2008 |
1.6.2010 |
1.6.2011 |
|
CEN |
EN 15285:2008 Agglomerated stone — Modular tiles for flooring and stairs (internal and external) |
|
1.1.2009 |
1.1.2010 |
|
|
EN 15285:2008/AC:2008 |
|
1.1.2009 |
1.1.2009 |
|
CEN |
EN 15286:2013 Agglomerated stone — Slabs and tiles for wall finishes (internal and external) |
|
8.8.2014 |
8.8.2015 |
|
CEN |
EN 15322:2013 Bitumen and bituminous binders — Framework for specifying cut-back and fluxed bituminous binders |
EN 15322:2009 |
8.8.2014 |
8.8.2015 |
|
CEN |
EN 15368:2008+A1:2010 Hydraulic binder for non-structural applications — Definition, specifications and conformity criteria |
|
1.9.2011 |
1.9.2012 |
|
CEN |
EN 15381:2008 Geotextiles and geotextile-related products — Characteristics required for use in pavements and asphalt overlays |
|
1.1.2010 |
1.1.2011 |
|
CEN |
EN 15382:2013 Geosynthetic barriers — Characteristics required for use in transportation infrastructure |
EN 15382:2008 |
8.8.2014 |
8.8.2015 |
|
CEN |
EN 15435:2008 Precast concrete products — Normal weight and lightweight concrete shuttering blocks — Product properties and performance |
|
1.2.2009 |
1.2.2010 |
|
CEN |
EN 15497:2014 Structural finger jointed solid timber — Performance requirements and minimum production requirements |
|
10.10.2014 |
10.10.2015 |
|
CEN |
EN 15498:2008 Precast concrete products — Wood-chip concrete shuttering blocks — Product properties and performance |
|
1.2.2009 |
1.2.2010 |
|
CEN |
EN 15501:2013 Thermal insulation products for building equipment and industrial installations — Factory made expanded perlite (EP) and exfoliated vermiculite (EV) products — Specification |
|
8.8.2014 |
8.8.2015 |
|
CEN |
EN 15599-1:2010 Thermal insulation products for building equipment and industrial installations — In-situ thermal insulation formed from expanded perlite (EP) products — Part 1: Specification for bonded and loose-fill products before installation |
|
1.4.2011 |
1.4.2012 |
|
CEN |
EN 15600-1:2010 Thermal insulation products for building equipment and industrial installations — In-situ thermal insulation formed from exfoliated vermiculite (EV) products — Part 1: Specification for bonded and loose-fill products before installation |
|
1.4.2011 |
1.4.2012 |
|
CEN |
EN 15650:2010 Ventilation for buildings — Fire dampers |
|
1.9.2011 |
1.9.2012 |
|
CEN |
EN 15651-1:2012 Sealants for non-structural use in joints in buildings and pedestrian walkways — Part 1: Sealants for facade elements |
|
1.7.2013 |
1.7.2014 |
|
CEN |
EN 15651-2:2012 Sealants for non-structural use in joints in buildings and pedestrian walkways — Part 2: Sealants for glazing |
|
1.7.2013 |
1.7.2014 |
|
CEN |
EN 15651-3:2012 Sealants for non-structural use in joints in buildings and pedestrian walkways — Part 3: Sealants for sanitary joints |
|
1.7.2013 |
1.7.2014 |
|
CEN |
EN 15651-4:2012 Sealants for non-structural use in joints in buildings and pedestrian walkways — Part 4: Sealants for pedestrian walkways |
|
1.7.2013 |
1.7.2014 |
|
CEN |
EN 15681-2:2017 Glass in Building — Basic alumino silicate glass products — Part 2: Product standard |
|
11.8.2017 |
11.8.2018 |
|
The third sentence of Clause 4.2.2.10 is excluded from the scope of the reference published. |
||||
|
CEN |
EN 15682-2:2013 Glass in building — Heat soaked thermally toughened alkaline earth silicate safety glass — Part 2: Evaluation of conformity/Product standard |
|
8.8.2014 |
8.8.2015 |
|
CEN |
EN 15683-2:2013 Glass in building — Thermally toughened soda lime silicate channel shaped safety glass — Part 2: Evaluation of conformity/Product standard |
|
8.8.2014 |
8.8.2015 |
|
CEN |
EN 15732:2012 Light weight fill and thermal insulation products for civil engineering applications (CEA) — Expanded clay lightweight aggregate products (LWA) |
|
1.8.2013 |
1.8.2014 |
|
CEN |
EN 15743:2010+A1:2015 Supersulfated cement — Composition, specifications and conformity criteria |
EN 15743:2010 |
13.11.2015 |
13.11.2016 |
|
CEN |
EN 15814:2011+A2:2014 Polymer modified bituminous thick coatings for waterproofing — Definitions and requirements |
EN 15814:2011+A1:2012 |
10.7.2015 |
10.7.2016 |
|
CEN |
EN 15821:2010 Multi-firing sauna stoves fired by natural wood logs — Requirements and test methods |
|
1.7.2011 |
1.7.2012 |
|
CEN |
EN 15824:2009 Specifications for external renders and internal plasters based on organic binders |
|
1.4.2010 |
1.4.2011 |
|
CEN |
EN 16034:2014 Pedestrian doorsets, industrial, commercial, garage doors and openable windows — Product standard, performance characteristics — Fire resisting and/or smoke control characteristics |
|
1.11.2016 |
1.11.2019 |
|
NOTE: EN 16034:2014 shall only be applied together with either EN 13241:2003+A2:2016 or EN 14351-1:2006+A2:2016. |
||||
|
CEN |
EN 16069:2012+A1:2015 Thermal insulation products for buildings — Factory made products of polyethylene foam (PEF) — Specification |
EN 16069:2012 |
10.7.2015 |
10.7.2016 |
|
CEN |
EN 16153:2013+A1:2015 Light transmitting flat multiwall polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings — Requirements and test methods |
EN 16153:2013 |
10.7.2015 |
10.7.2016 |
|
CEN |
EN 16240:2013 Light transmitting flat solid polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings — Requirements and test methods |
|
10.3.2017 |
10.3.2018 |
|
Cenelec |
EN 50575:2014 Power, control and communication cables — Cables for general applications in construction works subject to reaction to fire requirements |
|
10.6.2016 |
1.7.2017 |
|
|
EN 50575:2014/A1:2016 |
|
10.6.2016 |
1.7.2017 |
NOTE:
|
— |
Any information concerning the availability of the standards can be obtained either from the European standardisation organisations or from the national standardisation bodies the list of which is published in the Official Journal of the European Union according to Article 27 of the Regulation (EU) No 1025/2012 (2). |
|
— |
Standards are adopted by the European standardisation organisations in English (CEN and Cenelec also publish in French and German). Subsequently, the titles of the standards are translated into all other required official languages of the European Union by the national standardisation bodies. The European Commission is not responsible for the correctness of the titles which have been presented for publication in the Official Journal. |
|
— |
References to Corrigenda ‘…/AC:YYYY’ are published for information only. A Corrigendum removes printing, linguistic or similar errors from the text of a standard and may relate to one or more language versions (English, French and/or German) of a standard as adopted by a European standardisation organisation. |
|
— |
Publication of the references in the Official Journal of the European Union does not imply that the standards are available in all the official languages of the European Union. |
|
— |
This list replaces all the previous lists published in the Official Journal of the European Union. The European Commission ensures the updating of this list. |
|
— |
More information about harmonised standards and other European standards on the Internet at: http://ec.europa.eu/growth/single-market/european-standards/harmonised-standards/index_en.htm |
(1) ESO: European standardisation organisation:
|
— |
CEN: Avenue Marnix/Marnixlaan 17, 1000 Bruxelles/Brussel, BELGIQUE/BELGIË; tel. +32 25500811; fax +32 25500819 (http://www.cen.eu) |
|
— |
Cenelec: Avenue Marnix/Marnixlaan 17, 1000 Bruxelles/Brussel, BELGIQUE/BELGIË; tel. +32 25196871; fax +32 25196919 (http://www.cenelec.eu) |
|
— |
ETSI: 650 route des Lucioles, 06921 Sophia Antipolis, FRANCE; tel. +33 492944200; fax +33 493654716 (http://www.etsi.eu) |
(2) OJ C 338, 27.9.2014, p. 31.
|
15.12.2017 |
EN |
Official Journal of the European Union |
C 435/93 |
Commission communication in the framework of the implementation of the Directive 2008/57/EC of the European Parliament and of the Council on the interoperability of the rail system within the Community
(Publication of titles and references of harmonised standards under Union harmonisation legislation)
(Text with EEA relevance)
(2017/C 435/04)
|
ESO (1) |
Reference and title of the standard (and reference document) |
Reference of superseded standard |
Date of cessation of presumption of conformity of superseded standard Note 1 |
|
(1) |
(2) |
(3) |
(4) |
|
CEN |
EN ISO 3381:2011 Railway applications — Acoustics — Measurement of noise inside railbound vehicles (ISO 3381:2005) |
|
|
|
CEN |
EN 12080:2007+A1:2010 Railway applications — Axleboxes — Rolling bearings |
|
|
|
CEN |
EN 12081:2007+A1:2010 Railway applications — Axleboxes — Lubricating greases |
|
|
|
CEN |
EN 12082:2007+A1:2010 Railway applications — Axleboxes — Performance testing |
|
|
|
CEN |
EN 12663-1:2010+A1:2014 Railway applications — Structural requirements of railway vehicle bodies — Part 1: Locomotives and passenger rolling stock (and alternative method for freight wagons) |
EN 12663-1:2010 Note 2.1 |
8.7.2016 |
|
CEN |
EN 12663-2:2010 Railway applications — Structural requirements of railway vehicle bodies — Part 2: Freight wagons |
|
|
|
CEN |
EN 12665:2011 Light and lighting — Basic terms and criteria for specifying lighting requirements |
|
|
|
CEN |
EN 13103:2009+A2:2012 Railway applications — Wheelsets and bogies — Non-powered axles — Design method |
EN 13103:2009+A1:2010 Note 2.1 |
31.1.2013 |
|
CEN |
EN 13104:2009+A2:2012 Railway applications — Wheelsets and bogies — Powered axles — Design method |
EN 13104:2009+A1:2010 Note 2.1 |
30.4.2013 |
|
CEN |
EN 13129:2016 Railway applications — Air conditioning for main line rolling stock — Comfort parameters and type tests |
|
|
|
CEN |
EN 13145:2001+A1:2011 Railway applications — Track — Wood sleepers and bearers |
|
|
|
CEN |
EN 13230-1:2016 Railway applications — Track — Concrete sleepers and bearers — Part 1: General requirements |
EN 13230-1:2009 Note 2.1 |
The date of this publication |
|
CEN |
EN 13230-2:2016 Railway applications — Track — Concrete sleepers and bearers — Part 2: Prestressed monoblock sleepers |
EN 13230-2:2009 Note 2.1 |
The date of this publication |
|
CEN |
EN 13230-3:2016 Railway applications — Track — Concrete sleepers and bearers — Part 3: Twin-block reinforced sleepers |
EN 13230-3:2009 Note 2.1 |
The date of this publication |
|
CEN |
EN 13230-4:2009 Railway applications — Track — Concrete sleepers and bearers — Part 4: Prestressed bearers for switches and crossings |
|
|
|
CEN |
EN 13232-2:2003+A1:2011 Railway applications — Track — Switches and crossings — Part 2: Requirements for geometric design |
|
|
|
CEN |
EN 13232-3:2003+A1:2011 Railway applications — Track — Switches and crossings — Part 3: Requirements for wheel/rail interaction |
|
|
|
CEN |
EN 13232-4:2005+A1:2011 Railway applications — Track — Switches and crossings — Part 4: Actuation, locking and detection |
|
|
|
CEN |
EN 13232-5:2005+A1:2011 Railway applications — Track — Switches and crossings — Part 5: Switches |
|
|
|
CEN |
EN 13232-6:2005+A1:2011 Railway applications — Track — Switches and crossings — Part 6: Fixed common and obtuse crossings |
|
|
|
CEN |
EN 13232-7:2006+A1:2011 Railway applications — Track — Switches and crossings — Part 7: Crossings with moveable parts |
|
|
|
CEN |
EN 13232-8:2007+A1:2011 Railway applications — Track — Switches and crossings — Part 8: Expansion devices |
|
|
|
CEN |
EN 13232-9:2006+A1:2011 Railway applications — Track — Switches and crossings — Part 9: Layouts |
|
|
|
CEN |
EN 13260:2009+A1:2010 Railway applications — Wheelsets and bogies — Wheelsets — Product requirements |
|
|
|
CEN |
EN 13261:2009+A1:2010 Railway applications — Wheelsets and bogies — Axles — Product requirements |
|
|
|
CEN |
EN 13262:2004+A2:2011 Railway applications — Wheelsets and bogies — Wheels — Product requirements |
|
|
|
CEN |
EN 13272:2012 Railway applications — Electrical lighting for rolling stock in public transport systems |
|
|
|
CEN |
EN 13481-2:2012+A1:2017 Railway applications — Track — Performance requirements for fastening systems — Part 2: Fastening systems for concrete sleepers |
EN 13481-2:2012 Note 2.1 |
The date of this publication |
|
CEN |
EN 13481-3:2012 Railway applications — Track — Performance requirements for fastening systems — Part 3: Fastening systems for wood sleepers |
|
|
|
CEN |
EN 13481-5:2012+A1:2017 Railway applications — Track — Performance requirements for fastening systems — Part 5: Fastening systems for slab track with rail on the surface or rail embedded in a channel |
EN 13481-5:2012 Note 2.1 |
The date of this publication |
|
CEN |
EN 13481-7:2012 Railway applications — Track — Performance requirements for fastening systems — Part 7: Special fastening systems for switches and crossings and check rails |
|
|
|
CEN |
EN 13674-1:2011+A1:2017 Railway applications — Track — Rail — Part 1: Vignole railway rails 46 kg/m and above |
EN 13674-1:2011 Note 2.1 |
The date of this publication |
|
CEN |
EN 13674-2:2006+A1:2010 Railway applications — Track — Rail — Part 2: Switch and crossing rails used in conjunction with Vignole railway rails 46 kg/m and above |
|
|
|
CEN |
EN 13674-3:2006+A1:2010 Railway applications — Track — Rail — Part 3: Check rails |
|
|
|
CEN |
EN 13715:2006+A1:2010 Railway applications — Wheelsets and bogies — Wheels — Tread profile |
|
|
|
CEN |
EN 13749:2011 Railway applications — Wheelsets and bogies — Method of specifying the structural requirements of bogie frames |
|
|
|
CEN |
EN 13803-1:2010 Railway applications — Track — Track alignment design parameters — Track gauges 1 435 mm and wider — Part 1: Plain line |
|
|
|
CEN |
EN 13803-2:2006+A1:2009 Railway applications — Track — Track alignment design parameters — Track gauges 1 435 mm and wider — Part 2: Switches and crossings and comparable alignment design situations with abrupt changes of curvature |
|
|
|
CEN |
EN 13848-5:2008+A1:2010 Railway applications — Track — Track geometry quality — Part 5: Geometric quality levels — Plain line |
|
|
|
CEN |
EN 13979-1:2003+A2:2011 Railway applications — Wheelsets and bogies — Monobloc wheels — Technical approval procedure — Part 1: Forged and rolled wheels |
EN 13979-1:2003+A1:2009 Note 2.1 |
30.9.2011 |
|
CEN |
EN 14033-1:2017 Railway applications — Track — Railbound construction and maintenance machines — Part 1: Technical requirements for running |
EN 14033-1:2011 Note 2.1 |
The date of this publication |
|
CEN |
EN 14067-4:2005+A1:2009 Railway applications — Aerodynamics — Part 4: Requirements and test procedures for aerodynamics on open track |
|
|
|
CEN |
EN 14067-5:2006+A1:2010 Railway applications — Aerodynamics — Part 5: Requirements and test procedures for aerodynamics in tunnels |
|
|
|
CEN |
EN 14067-6:2010 Railway applications — Aerodynamics — Part 6: Requirements and test procedures for cross wind assessment |
|
|
|
CEN |
EN 14198:2016 Railway applications — Braking — Requirements for the brake system of trains hauled by locomotives |
|
|
|
CEN |
EN 14531-1:2015 Railway applications — Methods for calculation of stopping and slowing distances and immobilization braking — Part 1: General algorithms utilizing mean value calculation for train sets or single vehicles |
EN 14531-6:2009 Note 2.1 |
8.7.2016 |
|
CEN |
EN 14531-2:2015 Railway applications — Methods for calculation of stopping and slowing distances and immobilization braking — Part 2: Step by step calculations for train sets or single vehicles |
EN 14531-6:2009 Note 2.1 |
8.7.2016 |
|
CEN |
EN 14535-1:2005+A1:2011 Railway applications — Brake discs for railway rolling stock — Part 1: Brake discs pressed or shrunk onto the axle or drive shaft, dimensions and quality requirements |
|
|
|
CEN |
EN 14535-2:2011 Railway applications — Brake discs for railway rolling stock — Part 2: Brake discs mounted onto the wheel, dimensions and quality requirements |
|
|
|
CEN |
EN 14535-3:2015 Railway applications — Brake discs for railway rolling stock — Part 3: Brake discs, performance of the disc and the friction couple, classification |
|
|
|
CEN |
EN 14587-2:2009 Railway applications — Track — Flash butt welding of rails — Part 2: New R220, R260, R260Mn and R350HT grade rails by mobile welding machines at sites other than a fixed plant |
|
|
|
CEN |
EN 14601:2005+A1:2010 Railway applications — Straight and angled end cocks for brake pipe and main reservoir pipe |
|
|
|
CEN |
EN 14752:2015 Railway applications — Body side entrance systems for rolling stock |
|
|
|
CEN |
EN 14813-1:2006+A1:2010 Railway applications — Air conditioning for driving cabs — Part 1: Comfort parameters |
|
|
|
CEN |
EN 14813-2:2006+A1:2010 Railway applications — Air conditioning for driving cabs — Part 2: Type tests |
|
|
|
CEN |
EN 14865-1:2009+A1:2010 Railway applications — Axlebox lubricating greases — Part 1: Method to test the ability to lubricate |
|
|
|
CEN |
EN 14865-2:2006+A2:2010 Railway applications — Axlebox lubricating greases — Part 2: Method to test the mechanical stability to cover vehicle speeds up to 200 km/h |
|
|
|
CEN |
EN 15020:2006+A1:2010 Railway applications — Rescue coupler — Performance requirements, specific interface geometry and test methods |
|
|
|
CEN |
EN 15153-1:2013+A1:2016 Railway applications — External visible and audible warning devices for trains — Part 1: Head, marker and tail lamps |
EN 15153-1:2013 Note 2.1 |
The date of this publication |
|
CEN |
EN 15153-2:2013 Railway applications — External visible and audible warning devices for trains — Part 2: Warning horns |
|
|
|
CEN |
EN 15220:2016 Railway applications — Brake indicators |
EN 15220-1:2008+A1:2011 Note 2.1 |
The date of this publication |
|
CEN |
EN 15227:2008+A1:2010 Railway applications — Crashworthiness requirements for railway vehicle bodies |
|
|
|
CEN |
EN 15273-2:2013+A1:2016 Railway applications — Gauges — Part 2: Rolling stock gauge |
EN 15273-2:2013 Note 2.1 |
The date of this publication |
|
CEN |
EN 15273-3:2013+A1:2016 Railway applications — Gauges — Part 3: Structure gauges |
EN 15273-3:2013 Note 2.1 |
The date of this publication |
|
CEN |
EN 15302:2008+A1:2010 Railway applications — Method for determining the equivalent conicity |
|
|
|
CEN |
EN 15313:2016 Railway applications — In-service wheelset operation requirements — In-service and off-vehicle wheelset maintenance |
EN 15313:2010 Note 2.1 |
The date of this publication |
|
CEN |
EN 15355:2008+A1:2010 Railway applications — Braking — Distributor valves and distributor-isolating devices |
|
|
|
CEN |
EN 15427:2008+A1:2010 Railway applications — Wheel/rail friction management — Flange lubrication |
|
|
|
CEN |
EN 15437-1:2009 Railway applications — Axlebox condition monitoring — Interface and design requirements — Part 1: Track side equipment and rolling stock axlebox |
|
|
|
CEN |
EN 15437-2:2012 Railway applications — Axlebox condition monitoring — Interface and design requirements — Part 2: Performance and design requirements of on-board systems for temperature monitoring |
|
|
|
CEN |
EN 15461:2008+A1:2010 Railway applications — Noise emission — Characterisation of the dynamic properties of track sections for pass by noise measurements |
|
|
|
CEN |
EN 15528:2015 Railway applications — Line categories for managing the interface between load limits of vehicles and infrastructure |
EN 15528:2008+A1:2012 Note 2.1 |
8.7.2016 |
|
CEN |
EN 15551:2017 Railway applications — Railway rolling stock — Buffers |
EN 15551:2009+A1:2010 Note 2.1 |
The date of this publication |
|
CEN |
EN 15566:2016 Railway applications — Railway rolling stock — Draw gear and screw coupling |
EN 15566:2009+A1:2010 Note 2.1 |
The date of this publication |
|
CEN |
EN 15594:2009 Railway applications — Track — Restoration of rails by electric arc welding |
|
|
|
CEN |
EN 15595:2009+A1:2011 Railway applications — Braking — Wheel slide protection |
|
|
|
CEN |
EN 15610:2009 Railway applications — Noise emission — Rail roughness measurement related to rolling noise generation |
|
|
|
CEN |
EN 15611:2008+A1:2010 Railway applications — Braking — Relay valves |
EN 15611:2008 Note 2.1 |
30.4.2011 |
|
CEN |
EN 15612:2008+A1:2010 Railway applications — Braking — Brake pipe accelerator valve |
EN 15612:2008 Note 2.1 |
30.4.2011 |
|
CEN |
EN 15624:2008+A1:2010 Railway applications — Braking — Empty-loaded changeover devices |
EN 15624:2008 Note 2.1 |
30.4.2011 |
|
CEN |
EN 15625:2008+A1:2010 Railway applications — Braking — Automatic variable load sensing devices |
EN 15625:2008 Note 2.1 |
30.4.2011 |
|
CEN |
EN 15663:2009 Railway applications — Definition of vehicle reference masses |
|
|
|
|
EN 15663:2009/AC:2010 |
|
|
|
CEN |
EN 15686:2010 Railway applications — Testing for the acceptance of running characteristics of railway vehicles with cant deficiency compensation system and/or vehicles intended to operate with higher cant deficiency than stated in EN 14363:2005, Annex G |
|
|
|
CEN |
EN 15687:2010 Railway applications — Testing for the acceptance of running characteristics of freight vehicles with static axle loads higher than 225 kN and up to 250 kN |
|
|
|
CEN |
EN 15723:2010 Railway applications — Closing and locking devices for payload protecting devices against environmental influences — Requirements for durability, operation, indication, maintenance, recycling |
|
|
|
CEN |
EN 15734-1:2010 Railway applications — Braking systems of high speed trains — Part 1: Requirements and definitions |
|
|
|
CEN |
EN 15734-2:2010 Railway applications — Braking systems of high speed trains — Part 2: Test methods |
|
|
|
|
EN 15734-2:2010/AC:2012 |
|
|
|
CEN |
EN 15746-1:2010+A1:2011 Railway applications — Track — Road-rail machines and associated equipment — Part 1: Technical requirements for running and working |
EN 15746-1:2010 Note 2.1 |
30.4.2011 |
|
CEN |
EN 15746-2:2010+A1:2011 Railway applications — Track — Road-rail machines and associated equipment — Part 2: General safety requirements |
EN 15746-2:2010 Note 2.1 |
30.4.2012 |
|
CEN |
EN 15806:2010 Railway applications — Braking — Static brake testing |
|
|
|
CEN |
EN 15807:2011 Railway applications — Pneumatic half couplings |
|
|
|
CEN |
EN 15827:2011 Railway applications — Requirements for bogies and running gears |
|
|
|
CEN |
EN 15839:2012 Railway applications — Testing for the acceptance of running characteristics of railway vehicles — Freight wagons — Testing of running safety under longitudinal compressive forces |
|
|
|
Date of removal of the reference of this obsolete harmonised standard from the OJ: 31.1.2018. The removal is due to the fact that the standard in question has been withdrawn by the relevant ESO and is no longer an adopted European standard within the meaning of Article 2(1) point (c) of Regulation (EU) No 1025/2012 (OJ L 316, 14.11.2012). |
|||
|
CEN |
EN 15877-1:2012 Railway applications — Marking on railway vehicles — Part 1: Freight wagons |
|
|
|
CEN |
EN 15877-2:2013 Railway applications — Markings of railway vehicles — Part 2: External markings on coaches, motive power units, locomotives and on track machines |
|
|
|
CEN |
EN 15892:2011 Railway applications — Noise Emission — Measurement of noise inside driver’s cabs |
|
|
|
CEN |
EN 16019:2014 Railway applications — Automatic coupler — Performance requirements, specific interface geometry and test method |
|
|
|
CEN |
EN 16116-1:2013 Railway applications — Design requirements for steps, handrails and associated access for staff — Part 1: Passenger vehicles, luggage vans and locomotives |
|
|
|
CEN |
EN 16116-2:2013 Railway applications — Design requirements for steps, handrails and associated access for staff — Part 2: Freight wagons |
|
|
|
CEN |
EN 16185-1:2014 Railway applications — Braking systems of multiple unit trains — Part 1: Requirements and definitions |
|
|
|
CEN |
EN 16185-2:2014 Railway applications — Braking systems of multiple unit trains — Part 2: Test methods |
|
|
|
CEN |
EN 16186-3:2016 Railway applications — Driver’s cab — Part 3: Design of displays |
|
The date of this publication |
|
CEN |
EN 16207:2014 Railway applications — Braking — Functional and performance criteria of Magnetic Track Brake systems for use in railway rolling stock |
|
|
|
CEN |
EN 16235:2013 Railway application — Testing for the acceptance of running characteristics of railway vehicles — Freight wagons — Conditions for dispensation of freight wagons with defined characteristics from on-track tests according to EN 14363 |
|
|
|
CEN |
EN 16241:2014+A1:2016 Railway applications — Slack adjuster |
EN 16241:2014 Note 2.1 |
The date of this publication |
|
CEN |
EN 16286-1:2013 Railway applications — Gangway systems between vehicles — Part 1: Main applications |
|
|
|
CEN |
EN 16334:2014 Railway applications — Passenger Alarm System — System requirements |
|
|
|
CEN |
EN 16404:2016 Railway applications — Re-railing and recovery requirements for railway vehicles |
EN 16404:2014 Note 2.1 |
The date of this publication |
|
CEN |
EN 16494:2015 Railway applications — Requirements for ERTMS Trackside Boards |
|
|
|
CEN |
EN 16584-1:2017 Railway applications — Design for PRM use — General requirements — Part 1: Contrast |
|
|
|
CEN |
EN 16584-2:2017 Railway applications — Design for PRM use — General requirements — Part 2: Information |
|
|
|
CEN |
EN 16584-3:2017 Railway applications — Design for PRM use — General requirements — Part 3: Optical and friction characteristics |
|
|
|
CEN |
EN 16585-1:2017 Railway applications — Design for PRM use — Equipment and components onboard rolling stock — Part 1: Toilets |
|
|
|
CEN |
EN 16585-2:2017 Railway applications — Design for PRM use — Equipment and components on board rolling stock — Part 2: Elements for sitting, standing and moving |
|
|
|
CEN |
EN 16585-3:2017 Railway applications — Design for PRM use — Equipment and components on board rolling stock — Part 3: Clearways and internal doors |
|
|
|
CEN |
EN 16586-1:2017 Railway applications — Design for PRM use — Accessibility of persons with reduced mobility to rolling stock — Part 1: Steps for access and egress |
|
|
|
CEN |
EN 16586-2:2017 Railway applications — Design for PRM use — Accessibility of persons with reduced mobility to rolling stock — Part 2: Boarding aids |
|
|
|
CEN |
EN 16587:2017 Railway applications — Design for PRM Use — Requirements on obstacle free routes for infrastructure |
|
|
|
CEN |
EN 16683:2015 Railway applications — Call for aid and communication device — Requirements |
|
|
|
CEN |
EN 16729-1:2016 Railway applications — Infrastructure — Non-destructive testing on rails in track — Part 1: Requirements for ultrasonic inspection and evaluation principles |
|
|
|
CEN |
EN 45545-1:2013 Railway applications — Fire protection on railway vehicles — Part 1: General |
|
|
|
CEN |
EN 45545-2:2013+A1:2015 Railway applications — Fire protection on railway vehicles — Part 2: Requirements for fire behaviour of materials and components |
EN 45545-2:2013 Note 2.1 |
8.7.2016 |
|
CEN |
EN 45545-3:2013 Railway applications — Fire protection on railway vehicles — Part 3: Fire resistance requirements for fire barriers |
|
|
|
CEN |
EN 45545-4:2013 Railway applications — Fire protection on railway vehicles — Part 4: Fire safety requirements for rolling stock design |
|
|
|
CEN |
EN 45545-5:2013+A1:2015 Railway applications — Fire protection on railway vehicles — Part 5: Fire safety requirements for electrical equipment including that of trolley buses, track guided buses and magnetic levitation vehicles |
EN 45545-5:2013 Note 2.1 |
8.7.2016 |
|
CEN |
EN 45545-6:2013 Railway applications — Fire protection on railway vehicles — Part 6: Fire control and management systems |
|
|
|
CEN |
EN 45545-7:2013 Railway applications — Fire protection on railway vehicles — Part 7: Fire safety requirements for flammable liquid and flammable gas installations |
|
|
|
Cenelec |
EN 50122-1:2011 Railway applications — Fixed installations — Electrical safety, earthing and the return circuit — Part 1: Protective provisions against electric shock |
|
|
|
|
EN 50122-1:2011/AC:2012 |
|
|
|
Cenelec |
EN 50122-2:2010 Railway applications — Fixed installations — Electrical safety, earthing and the return circuit — Part 2: Provisions against the effects of stray currents caused by d.c. traction systems |
|
|
|
Cenelec |
EN 50122-3:2010 Railway applications — Fixed installations — Electrical safety, earthing and the return circuit — Part 3: Mutual Interaction of a.c. and d.c. traction systems |
|
|
|
Cenelec |
EN 50124-1:2001 Railway applications — Insulation coordination — Part 1: Basic requirements — Clearances and creepage distances for all electrical and electronic equipment |
|
|
|
|
EN 50124-1:2001/A1:2003 |
Note 3 |
1.10.2006 |
|
|
EN 50124-1:2001/A2:2005 |
Note 3 |
1.5.2008 |
|
|
EN 50124-1:2001/AC:2010 |
|
|
|
|
EN 50124-1:2001/AC:2007 |
|
|
|
Cenelec |
EN 50124-1:2017 Railway applications — Insulation coordination — Part 1: Basic requirements — Clearances and creepage distances for all electrical and electronic equipment |
EN 50124-1:2001 + A1:2003 + A2:2005 Note 2.1 |
6.2.2020 |
|
Cenelec |
EN 50124-2:2001 Railway applications — Insulation coordination — Part 2: Overvoltages and related protection |
|
|
|
|
EN 50124-2:2001/AC:2010 |
|
|
|
Cenelec |
EN 50124-2:2017 Railway applications — Insulation coordination — Part 2: Overvoltages and related protection |
EN 50124-2:2001 Note 2.1 |
6.2.2020 |
|
Cenelec |
EN 50125-2:2002 Railway applications — Environmental conditions for equipment — Part 2: Fixed electrical installations |
|
|
|
|
EN 50125-2:2002/AC:2010 |
|
|
|
Cenelec |
EN 50125-3:2003 Railway applications — Environmental conditions for equipment — Part 3: Equipment for signalling and telecommunications |
|
|
|
|
EN 50125-3:2003/AC:2010 |
|
|
|
Cenelec |
EN 50126-1:1999 Railway applications — The specification and demonstration of Reliability, Availability, Maintainability and Safety (RAMS) — Part 1: Basic requirements and generic process |
|
|
|
|
EN 50126-1:1999/AC:2012 |
|
|
|
|
EN 50126-1:1999/AC:2010 |
|
|
|
|
EN 50126-1:1999/AC:2006 |
|
|
|
Cenelec |
EN 50129:2003 Railway applications — Communication, signalling and processing systems — Safety related electronic systems for signalling |
|
|
|
|
EN 50129:2003/AC:2010 |
|
|
|
Cenelec |
EN 50151:2003 Railway applications — Fixed installations — Electric traction — Special requirements for composite insulators |
|
|
|
|
EN 50151:2003/AC:2010 |
|
|
|
Cenelec |
EN 50155:2007 Railway applications — Electronic equipment used on rolling stock |
EN 50155:2001 Note 2.1 |
|
|
|
EN 50155:2007/AC:2012 |
|
|
|
|
EN 50155:2007/AC:2010 |
|
|
|
Cenelec |
EN 50159:2010 Railway applications — Communication, signalling and processing systems — Safety-related communication in transmission systems |
EN 50159-1:2001 EN 50159-2:2001 Note 2.1 |
1.9.2013 |
|
Cenelec |
EN 50163:2004 Railway applications — Supply voltages of traction systems |
|
|
|
|
EN 50163:2004/A1:2007 |
Note 3 |
1.3.2010 |
|
|
EN 50163:2004/AC:2013 |
|
|
|
|
EN 50163:2004/AC:2010 |
|
|
|
Cenelec |
EN 50238-1:2003 Railway applications — Compatibility between rolling stock and train detection systems — Part 1: General |
|
|
|
|
EN 50238-1:2003/AC:2014 |
|
|
|
Cenelec |
EN 50317:2012 Railway applications — Current collection systems — Requirements for and validation of measurements of the dynamic interaction between pantograph and overhead contact line |
EN 50317:2002 + A1:2004 + A2:2007 Note 2.1 |
26.12.2014 |
|
|
EN 50317:2012/AC:2012 |
|
|
|
Cenelec |
EN 50367:2012 Railway applications — Current collection systems — Technical criteria for the interaction between pantograph and overhead line (to achieve free access) |
|
|
|
|
EN 50367:2012/AC:2013 |
|
|
|
|
EN 50367:2012/A1:2016 |
Note 3 |
25.7.2019 |
|
Cenelec |
EN 50388:2012 Railway Applications — Power supply and rolling stock — Technical criteria for the coordination between power supply (substation) and rolling stock to achieve interoperability |
EN 50388:2005 Note 2.1 |
13.2.2015 |
|
|
EN 50388:2012/AC:2013 |
|
|
|
Cenelec |
EN 50405:2015 Railway applications — Current collection systems — Pantographs, testing methods for contact strips |
|
|
|
|
EN 50405:2015/A1:2016 |
Note 3 |
The date of this publication |
|
Cenelec |
EN 50463-1:2012 Railway applications — Energy measurement on board trains — Part 1: General |
|
|
|
Cenelec |
EN 50463-2:2012 Railway applications — Energy measurement on board trains — Part 2: Energy measuring |
|
|
|
Cenelec |
EN 50463-3:2012 Railway applications — Energy measurement on board trains — Part 3: Data handling |
|
|
|
Cenelec |
EN 50463-4:2012 Railway applications — Energy measurement on board trains — Part 4: Communication |
|
|
|
Cenelec |
EN 50463-5:2012 Railway applications — Energy measurement on board trains — Part 5: Conformity assessment |
|
|
|
Cenelec |
EN 50533:2011 Railway applications — Three-phase train line voltage characteristics |
|
|
|
|
EN 50533:2011/A1:2016 |
Note 3 |
The date of this publication |
|
Cenelec |
EN 50553:2012 Railway applications — Requirements for running capability in case of fire on board of rolling stock |
|
|
|
|
EN 50553:2012/AC:2013 |
|
|
|
|
EN 50553:2012/A1:2016 |
Note 3 |
15.2.2019 |
|
Cenelec |
EN 50592:2016 Railway applications — Testing of rolling stock for electromagnetic compatibility with axle counters |
|
|
|
Cenelec |
EN 50617-1:2015 Railway applications — Technical parameters of train detection systems for the interoperability of the trans-European railway system — Part 1: Track circuits |
|
|
|
Cenelec |
EN 50617-2:2015 Railway Applications — Technical parameters of train detection systems for the interoperability of the trans-European railway system — Part 2: Axle counters |
|
|
|
|
EN 50617-2:2015/AC:2016 |
|
|
|
Cenelec |
EN 61375-1:2012 Electronic railway equipment — Train communication network (TCN) — Part 1: General architecture IEC 61375-1:2012 |
|
|
|
Cenelec |
EN 61375-2-1:2012 Electronic railway equipment — Train communication network (TCN) — Part 2-1: Wire Train Bus (WTB) IEC 61375-2-1:2012 |
|
|
|
Cenelec |
EN 61375-2-2:2012 Electronic railway equipment — Train communication network (TCN) — Part 2-2: Wire Train Bus conformance testing IEC 61375-2-2:2012 |
|
|
|
Cenelec |
EN 61375-2-5:2015 Electronic railway equipment — Train communication network (TCN) — Part 2-5: Ethernet train backbone IEC 61375-2-5:2014 |
|
|
|
Cenelec |
EN 61375-3-1:2012 Electronic railway equipment — Train communication network (TCN) — Part 3-1: Multifunction Vehicle Bus (MVB) IEC 61375-3-1:2012 |
|
|
|
Cenelec |
EN 61375-3-2:2012 Electronic railway equipment — Train communication network (TCN) — Part 3-2: MVB (Multifunction Vehicle Bus) conformance testing IEC 61375-3-2:2012 |
|
|
|
Cenelec |
EN 61375-3-3:2012 Electronic railway equipment — Train communication network (TCN) — Part 3-3: CANopen Consist Network (CCN) IEC 61375-3-3:2012 |
|
|
|
Cenelec |
EN 62580-1:2016 Electronic railway equipment — On-board multimedia and telematic subsystems for railways — Part 1: General architecture IEC 62580-1:2015 |
|
|
|
Cenelec |
EN 62621:2016 Railway applications — Fixed installations — Electric traction — Specific requirements for composite insulators used for overhead contact line systems IEC 62621:2011 |
EN 50151:2003 Note 2.1 |
21.12.2018 |
|
|
EN 62621:2016/A1:2016 |
Note 3 |
21.12.2018 |
|
Note 1: |
Generally the date of cessation of presumption of conformity will be the date of withdrawal (‘dow’), set by the European standardisation organisation, but attention of users of these standards is drawn to the fact that in certain exceptional cases this can be otherwise. |
|
Note 2.1: |
The new (or amended) standard has the same scope as the superseded standard. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
|
Note 2.2: |
The new standard has a broader scope than the superseded standard. On the date stated the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
|
Note 2.3: |
The new standard has a narrower scope than the superseded standard. On the date stated the (partially) superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation for those products or services that fall within the scope of the new standard. Presumption of conformity with the essential or other requirements of the relevant Union legislation for products or services that still fall within the scope of the (partially) superseded standard, but that do not fall within the scope of the new standard, is unaffected. |
|
Note 3: |
In case of amendments, the referenced standard is EN CCCCC:YYYY, its previous amendments, if any, and the new, quoted amendment. The superseded standard therefore consists of EN CCCCC:YYYY and its previous amendments, if any, but without the new quoted amendment. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
NOTE:
|
— |
Any information concerning the availability of the standards can be obtained either from the European standardisation organisations or from the national standardisation bodies the list of which is published in the Official Journal of the European Union according to Article 27 of the Regulation (EU) No 1025/2012 (2). |
|
— |
Standards are adopted by the European standardisation organisations in English (CEN and Cenelec also publish in French and German). Subsequently, the titles of the standards are translated into all other required official languages of the European Union by the national standardisation bodies. The European Commission is not responsible for the correctness of the titles which have been presented for publication in the Official Journal. |
|
— |
References to Corrigenda ‘…/AC:YYYY’ are published for information only. A Corrigendum removes printing, linguistic or similar errors from the text of a standard and may relate to one or more language versions (English, French and/or German) of a standard as adopted by a European standardisation organisation. |
|
— |
Publication of the references in the Official Journal of the European Union does not imply that the standards are available in all the official languages of the European Union. |
|
— |
This list replaces all the previous lists published in the Official Journal of the European Union. The European Commission ensures the updating of this list. |
|
— |
More information about harmonised standards and other European standards on the Internet at: http://ec.europa.eu/growth/single-market/european-standards/harmonised-standards/index_en.htm |
(1) ESO: European standardisation organisation:
|
— |
CEN: Avenue Marnix 17, B-1000, Brussels, Tel. +32 25500811; fax +32 25500819 (http://www.cen.eu) |
|
— |
Cenelec: Avenue Marnix 17, B-1000, Brussels, Tel. +32 25196871; fax +32 25196919 (http://www.cenelec.eu) |
|
— |
ETSI: 650, route des Lucioles, F-06921 Sophia Antipolis, Tel. +33 492 944200; fax +33 493654716, (http://www.etsi.eu) |
(2) OJ C 338, 27.9.2014, p. 31.
|
15.12.2017 |
EN |
Official Journal of the European Union |
C 435/111 |
Commission communication in the framework of the implementation of Directive 1999/5/EC of the European Parliament and of the Council on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity and Directive 2014/53/EU of the European Parliament and of the Council on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC
(Publication of titles and references of harmonised standards under Union harmonisation legislation)
(Text with EEA relevance)
(2017/C 435/05)
Directive 1999/5/EC
In accordance with the transitional provision of Article 48 of Directive 2014/53/EU (1), Member States shall not impede the making available on the market or putting into service of radio equipment covered by Directive 2014/53/EU which is in conformity with Directive 1999/5/EC (2) and which was placed on the market before 13 June 2017. Accordingly, harmonised standards, the references to which have been published under Directive 1999/5/EC, as lastly listed in the Commission communication published in the Official Journal of the European Union C 249 of 8 July 2016, p. 1 , and corrected by the corrigendum published in the Official Journal of the European Union C 342 of 17 September 2016, p. 15 , and the corrigendum published in the Official Journal of the European Union C 403 of 1 November 2016, p. 26 , continue to confer a presumption of conformity with that Directive until 12 June 2017.
Directive 2014/53/EU
(Publication of titles and references of harmonised standards under Union harmonisation legislation)
|
ESO (3) |
Reference and title of the standard (and reference document) |
First publication OJ |
Reference of superseded standard |
Date of cessation of presumption of conformity of superseded standard Note 1 |
Standard aims to cover Article(s) of Directive 2014/53/EU |
|
(1) |
(2) |
(3) |
(4) |
(5) |
(6) |
|
Cenelec |
EN 50360:2017 Product standard to demonstrate the compliance of wireless communication devices, with the basic restrictions and exposure limit values related to human exposure to electromagnetic fields in the frequency range from 300 MHz to 6 GHz: devices used next to the ear |
17.11.2017 |
|
|
Article 3(1)(a) |
|
Cenelec |
EN 50385:2017 Product standard to demonstrate the compliance of base station equipment with radiofrequency electromagnetic field exposure limits (110 MHz — 100 GHz), when placed on the market |
17.11.2017 |
|
|
Article 3(1)(a) |
|
Cenelec |
EN 50401:2017 Product standard to demonstrate the compliance of base station equipment with radiofrequency electromagnetic field exposure limits (110 MHz — 100 GHz), when put into service |
17.11.2017 |
|
|
Article 3(1)(a) |
|
Cenelec |
EN 50566:2017 Product standard to demonstrate the compliance of wireless communication devices with the basic restrictions and exposure limit values related to human exposure to electromagnetic fields in the frequency range from 30 MHz to 6 GHz: hand-held and body mounted devices in close proximity to the human body |
17.11.2017 |
|
|
Article 3(1)(a) |
|
Cenelec |
EN 55035:2017 Electromagnetic compatibility of multimedia equipment — Immunity requirements CISPR 35:2016 (Modified) |
17.11.2017 |
|
|
Article 3(1)(b) |
|
ETSI |
EN 300 065 V2.1.2 Narrow-band direct-printing telegraph equipment for receiving meteorological or navigational information (NAVTEX); Harmonised Standard covering the essential requirements of articles 3.2 and 3.3(g) of the Directive 2014/53/EU |
8.7.2016 |
|
|
Article 3(2); Article 3(3)(g) |
|
ETSI |
EN 300 086 V2.1.2 Land Mobile Service; Radio equipment with an internal or external RF connector intended primarily for analogue speech; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
9.12.2016 |
|
|
Article 3(2) |
|
ETSI |
EN 300 113 V2.2.1 Land Mobile Service; Radio equipment intended for the transmission of data (and/or speech) using constant or non-constant envelope modulation and having an antenna connector; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
12.4.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 300 219 V2.1.1 Land Mobile Service; Radio equipment transmitting signals to initiate a specific response in the receiver; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
12.4.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 300 220-2 V3.1.1 Short Range Devices (SRD) operating in the frequency range 25 MHz to 1 000 MHz; Part 2: Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU for non specific radio equipment |
10.3.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 300 220-3-1 V2.1.1 Short Range Devices (SRD) operating in the frequency range 25 MHz to 1 000 MHz; Part 3-1: Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU; Low duty cycle high reliability equipment, social alarms equipment operating on designated frequencies (869,200 MHz to 869,250 MHz) |
10.3.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 300 220-3-2 V1.1.1 Short Range Devices (SRD) operating in the frequency range 25 MHz to 1 000 MHz; Part 3-2: Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU; Wireless alarms operating in designated LDC/HR frequency bands 868,60 MHz to 868,70 MHz, 869,25 MHz to 869,40 MHz, 869,65 MHz to 869,70 MHz |
10.3.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 300 220-4 V1.1.1 Short Range Devices (SRD) operating in the frequency range 25 MHz to 1 000 MHz; Part 4: Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU; Metering devices operating in designated band 169,400 MHz to 169,475 MHz |
10.3.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 300 224 V2.1.1 Land Mobile Service; Radio Equipment for use in a Paging Service operating within the frequency range 25 MHz — 470 MHz; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
13.10.2017 |
EN 300 224-2 V1.1.1 Note 2.1 |
28.2.2019 |
Article 3(2) |
|
ETSI |
EN 300 224-2 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); On-site paging service; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive |
8.6.2017 |
|
|
Article 3(2) |
|
This harmonised standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters. |
|||||
|
ETSI |
EN 300 296 V2.1.1 Land Mobile Service; Radio equipment using integral antennas intended primarily for analogue speech; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
12.4.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 300 328 V2.1.1 Wideband transmission systems; Data transmission equipment operating in the 2,4 GHz ISM band and using wide band modulation techniques; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
13.1.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 300 330 V2.1.1 Short Range Devices (SRD); Radio equipment in the frequency range 9 kHz to 25 MHz and inductive loop systems in the frequency range 9 kHz to 30 MHz; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
10.3.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 300 341 V2.1.1 Land Mobile Service; Radio equipment using an integral antenna transmitting signals to initiate a specific response in the receiver; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
12.4.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 300 390 V2.1.1 Land Mobile Service; Radio equipment intended for the transmission of data (and speech) and using an integral antenna; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
12.4.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 300 422-1 V2.1.2 Wireless Microphones; Audio PMSE up to 3 GHz; Part 1: Class A Receivers; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
10.2.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 300 422-2 V2.1.1 Wireless Microphones; Audio PMSE up to 3 GHz; Part 2: Class B Receivers; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
10.3.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 300 422-3 V2.1.1 Wireless Microphones; Audio PMSE up to 3 GHz; Part 3: Class C Receivers; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
10.3.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 300 433 V2.1.1 Citizens' Band (CB) radio equipment; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
12.4.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 300 440 V2.1.1 Short Range Devices (SRD); Radio equipment to be used in the 1 GHz to 40 GHz frequency range; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
14.7.2017 |
EN 300 440-2 V1.4.1 Note 2.1 |
31.12.2018 |
Article 3(2) |
|
This harmonised standard does not address, for receiver categories 2 and 3 as defined in Table 5, the requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters. |
|||||
|
ETSI |
EN 300 440-2 V1.4.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short range devices; Radio equipment to be used in the 1 GHz to 40 GHz frequency range; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
8.6.2017 |
|
|
Article 3(2) |
|
This harmonised standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters. |
|||||
|
ETSI |
EN 300 454-2 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Wide band audio links; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive |
8.6.2017 |
|
|
Article 3(2) |
|
This harmonised standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters. |
|||||
|
ETSI |
EN 300 487 V2.1.2 Satellite Earth Stations and Systems (SES); Harmonised Standard for Receive-Only Mobile Earth Stations (ROMES) providing data communications operating in the 1,5 GHz frequency band; Radio Frequency (RF) specifications covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
13.1.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 300 676-2 V2.1.1 Ground-based VHF hand-held, mobile and fixed radio transmitters, receivers and transceivers for the VHF aeronautical mobile service using amplitude modulation; Part 2: Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
8.7.2016 |
|
|
Article 3(2) |
|
ETSI |
EN 300 698 V2.1.1 Radio telephone transmitters and receivers for the maritime mobile service operating in the VHF bands used on inland waterways; Harmonised Standard covering the essential requirements of articles 3.2 and 3.3(g) of the Directive 2014/53/EU |
13.1.2017 |
|
|
Article 3(2); Article 3(3)(g) |
|
ETSI |
EN 300 698 V2.2.1 Radio telephone transmitters and receivers for the maritime mobile service operating in the VHF bands used on inland waterways; Harmonised Standard covering the essential requirements of articles 3.2 and 3.3(g) of Directive 2014/53/EU |
This is the first publication |
EN 300 698 V2.1.1 Note 2.1 |
31.5.2018 |
Article 3(2); Article 3(3)(g) |
|
ETSI |
EN 300 718-2 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Avalanche Beacons; Transmitter-receiver systems; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive |
8.6.2017 |
|
|
Article 3(2) |
|
This harmonised standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters. |
|||||
|
ETSI |
EN 300 718-3 V1.2.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Avalanche Beacons; Transmitter-receiver systems; Part 3: Harmonized EN covering essential requirements of article 3.3e of the R&TTE Directive |
8.6.2017 |
|
|
Article 3(3)(g) |
|
ETSI |
EN 300 720 V2.1.1 Ultra-High Frequency (UHF) on-board vessels communications systems and equipment; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
10.3.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 301 025 V2.1.1 VHF radiotelephone equipment for general communications and associated equipment for Class ‘D’ Digital Selective Calling (DSC); Harmonised Standard covering the essential requirements of articles 3.2 and 3.3(g) of the Directive 2014/53/EU |
12.8.2016 |
|
|
Article 3(2); Article 3(3)(g) |
|
ETSI |
EN 301 025 V2.2.1 VHF radiotelephone equipment for general communications and associated equipment for Class ‘D’ Digital Selective Calling (DSC); Harmonised Standard covering the essential requirements of articles 3.2 and 3.3(g) of Directive 2014/53/EU |
12.4.2017 |
EN 301 025 V2.1.1 Note 2.1 |
30.11.2018 |
Article 3(2); Article 3(3)(g) |
|
ETSI |
EN 301 091-2 V1.3.2 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices; Road Transport and Traffic Telematics (RTTT); Radar equipment operating in the 76 GHz to 77 GHz range; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive |
8.6.2017 |
|
|
Article 3(2) |
|
This harmonised standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters. |
|||||
|
ETSI |
EN 301 166 V2.1.1 Land Mobile Service; Radio equipment for analogue and/or digital communication (speech and/or data) and operating on narrow band channels and having an antenna connector; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
10.2.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 301 178 V2.2.2 Portable Very High Frequency (VHF) radiotelephone equipment for the maritime mobile service operating in the VHF bands (for non-GMDSS applications only); Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
12.5.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 301 357 V2.1.1 Cordless audio devices in the range 25 MHz to 2 000 MHz; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
14.7.2017 |
EN 301 357-2 V1.4.1 Note 2.1 |
28.2.2019 |
Article 3(2) |
|
ETSI |
EN 301 357-2 V1.4.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Cordless audio devices in the range 25 MHz to 2 000 MHz; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive |
8.6.2017 |
|
|
Article 3(2) |
|
This harmonised standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters. |
|||||
|
ETSI |
EN 301 360 V2.1.1 Satellite Earth Stations and Systems (SES); Harmonised Standard for Satellite Interactive Terminals (SIT) and Satellite User Terminals (SUT) transmitting towards satellites in geostationary orbit, operating in the 27,5 GHz to 29,5 GHz frequency bands covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
11.11.2016 |
|
|
Article 3(2) |
|
ETSI |
EN 301 406 V2.2.2 Digital Enhanced Cordless Telecommunications (DECT); Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
11.11.2016 |
|
|
Article 3(2) |
|
ETSI |
EN 301 426 V2.1.2 Satellite Earth Stations and Systems (SES); Harmonised Standard for Low data rate Land Mobile satellite Earth Stations (LMES) and Maritime Mobile satellite Earth Stations (MMES) not intended for distress and safety communications operating in the 1,5 GHz/1,6 GHz frequency bands covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
13.1.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 301 427 V2.1.1 Satellite Earth Stations and Systems (SES); Harmonised Standard for low data rate Mobile satellite Earth Stations (MES) except aeronautical mobile satellite earth stations, operating in the 11/12/14 GHz frequency bands covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
12.4.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 301 428 V2.1.2 Satellite Earth Stations and Systems (SES); Harmonised Standard for Very Small Aperture Terminal (VSAT); Transmit-only, transmit/receive or receive-only satellite earth stations operating in the 11/12/14 GHz frequency bands covering the essential requirements of article 3.2 of Directive 2014/53/EU |
8.6.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 301 430 V2.1.1 Satellite Earth Stations and Systems (SES); Harmonised Standard for Satellite News Gathering Transportable Earth Stations (SNG TES) operating in the 11 GHz to 12 GHz/13 GHz to 14 GHz frequency bands covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
14.10.2016 |
|
|
Article 3(2) |
|
ETSI |
EN 301 441 V2.1.1 Satellite Earth Stations and Systems (SES); Harmonised Standard for Mobile Earth Stations (MES), including handheld earth stations, for Satellite Personal Communications Networks (S-PCN) operating in the 1,6 GHz/2,4 GHz frequency band under the Mobile Satellite Service (MSS) covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
12.4.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 301 442 V2.1.1 Satellite Earth Stations and Systems (SES); Harmonised Standard for NGSO Mobile Earth Stations (MES) including handheld earth stations, for Satellite Personal Communications Networks (S-PCN) operating in the 1 980 MHz to 2 010 MHz (earth-to-space) and 2 170 MHz to 2 200 MHz (space-to-earth) frequency bands under the Mobile Satellite Service (MSS) covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
12.4.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 301 443 V2.1.1 Satellite Earth Stations and Systems (SES); Harmonised Standard for Very Small Aperture Terminal (VSAT); Transmit-only, transmit-and-receive, receive-only satellite earth stations operating in the 4 GHz and 6 GHz frequency bands covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
12.4.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 301 444 V2.1.2 Satellite Earth Stations and Systems (SES); Harmonised Standard for Land Mobile Earth Stations (LMES) providing voice and/or data communications, operating in the 1,5 GHz and 1,6 GHz frequency bands covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
13.1.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 301 447 V2.1.1 Satellite Earth Stations and Systems (SES); Harmonised Standard for satellite Earth Stations on board Vessels (ESVs) operating in the 4/6 GHz frequency bands allocated to the Fixed Satellite Service (FSS) covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
12.4.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 301 459 V2.1.1 Satellite Earth Stations and Systems (SES); Harmonised Standard for Satellite Interactive Terminals (SIT) and Satellite User Terminals (SUT) transmitting towards satellites in geostationary orbit, operating in the 29,5 GHz to 30,0 GHz frequency bands covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
14.10.2016 |
|
|
Article 3(2) |
|
ETSI |
EN 301 473 V2.1.2 Satellite Earth Stations and Systems (SES); Harmonised Standard for Aircraft Earth Stations (AES) providing Aeronautical Mobile Satellite Service (AMSS)/Mobile Satellite Service (MSS) and/or the Aeronautical Mobile Satellite on Route Service (AMS(R)S)/Mobile Satellite Service (MSS), operating in the frequency band below 3 GHz covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
13.1.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 301 502 V12.5.2 Global System for Mobile communications (GSM); Base Station (BS) equipment; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
12.4.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 301 511 V9.0.2 Global System for Mobile communications (GSM); Harmonized EN for mobile stations in the GSM 900 and GSM 1800 bands covering essential requirements under article 3.2 of the R&TTE directive (1999/5/EC) |
12.4.2017 |
|
|
Article 3(2) |
|
Notice: This harmonised standard provides presumption of conformity with the essential requirements of Directive 2014/53/EU if also the receiving parameters in clause(s) 4.2.20, 4.2.21 and 4.2.26 are applied |
|||||
|
ETSI |
EN 301 559 V2.1.1 Short Range Devices (SRD); Low Power Active Medical Implants (LP-AMI) and associated Peripherals (LP-AMI-P) operating in the frequency range 2 483,5 MHz to 2 500 MHz; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
13.1.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 301 598 V1.1.1 White Space Devices (WSD); Wireless Access Systems operating in the 470 MHz to 790 MHz TV broadcast band; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
8.6.2017 |
|
|
Article 3(2) |
|
This harmonised standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters. |
|||||
|
ETSI |
EN 301 681 V2.1.2 Satellite Earth Stations and Systems (SES); Harmonised Standard for Mobile Earth Stations (MES) of Geostationary mobile satellite systems, including handheld earth stations, for Satellite Personal Communications Networks (S-PCN) under the Mobile Satellite Service (MSS), operating in the 1,5 GHz and 1,6 GHz frequency bands covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
13.1.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 301 721 V2.1.1 Satellite Earth Stations and Systems (SES); Harmonised Standard for Mobile Earth Stations (MES) providing Low Bit Rate Data Communications (LBRDC) using Low Earth Orbiting (LEO) satellites operating below 1 GHz frequency band covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
12.4.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 301 783 V2.1.1 Commercially available amateur radio equipment; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
8.7.2016 |
|
|
Article 3(2) |
|
ETSI |
EN 301 839 V2.1.1 Ultra Low Power Active Medical Implants (ULP-AMI) and associated Peripherals (ULP-AMI-P) operating in the frequency range 402 MHz to 405 MHz; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
8.7.2016 |
|
|
Article 3(2) |
|
ETSI |
EN 301 841-3 V2.1.1 VHF air-ground Digital Link (VDL) Mode 2; Technical characteristics and methods of measurement for ground-based equipment; Part 3: Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
13.1.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 301 842-5 V2.1.1 VHF air-ground Digital Link (VDL) Mode 4 radio equipment; Technical characteristics and methods of measurement for ground-based equipment; Part 5: Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
13.1.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 301 893 V1.8.1 Broadband Radio Access Networks (BRAN); 5 GHz high performance RLAN; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
8.6.2017 |
|
|
Article 3(2) |
|
This harmonised standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters. |
|||||
|
ETSI |
EN 301 893 V2.1.1 5 GHz RLAN; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
8.6.2017 |
EN 301 893 V1.8.1 Note 2.1 |
12.6.2018 |
Article 3(2) |
|
As regards adaptivity, until 12.6.2018, either clause 4.2.7 of this harmonised standard or clause 4.8 of harmonised standard EN 301 893 v1.8.1 may be used; after that date, only clause 4.2.7 of this harmonised standard may be used. |
|||||
|
ETSI |
EN 301 908-1 V11.1.1 IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 1: Introduction and common requirements |
9.12.2016 |
|
|
Article 3(2) |
|
ETSI |
EN 301 908-2 V11.1.1 IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 2: CDMA Direct Spread (UTRA FDD) User Equipment (UE) |
12.4.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 301 908-2 V11.1.2 IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU; Part 2: CDMA Direct Spread (UTRA FDD) User Equipment (UE) |
13.10.2017 |
EN 301 908-2 V11.1.1 Note 2.1 |
28.2.2019 |
Article 3(2) |
|
ETSI |
EN 301 908-3 V11.1.3 IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU; Part 3: CDMA Direct Spread (UTRA FDD) Base Stations (BS) |
12.5.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 301 908-10 V4.2.2 Electromagnetic compatibility and Radio spectrum Matters (ERM); Base Stations (BS), Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular networks; Part 10: Harmonised Standard for IMT-2000, FDMA/TDMA (DECT) covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
13.1.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 301 908-11 V11.1.2 IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 11: CDMA Direct Spread (UTRA FDD) Repeaters |
10.2.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 301 908-12 V7.1.1 IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 12: CDMA Multi-Carrier (cdma2000) Repeaters |
9.9.2016 |
|
|
Article 3(2) |
|
ETSI |
EN 301 908-13 V11.1.1 IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 13: Evolved Universal Terrestrial Radio Access (E-UTRA) User Equipment (UE) |
12.5.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 301 908-13 V11.1.2 IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU; Part 13: Evolved Universal Terrestrial Radio Access (E-UTRA) User Equipment (UE) |
13.10.2017 |
EN 301 908-13 V11.1.1 Note 2.1 |
28.2.2019 |
Article 3(2) |
|
ETSI |
EN 301 908-14 V11.1.2 IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU; Part 14: Evolved Universal Terrestrial Radio Access (E-UTRA) Base Stations (BS) |
12.5.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 301 908-15 V11.1.2 IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU; Part 15: Evolved Universal Terrestrial Radio Access (E-UTRA FDD) Repeaters |
10.2.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 301 908-18 V11.1.2 IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU; Part 18: E-UTRA, UTRA and GSM/EDGE Multi-Standard Radio (MSR) Base Station (BS) |
12.5.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 301 908-19 V6.3.1 IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 19: OFDMA TDD WMAN (Mobile WiMAXTM) TDD User Equipment (UE) |
8.6.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 301 908-20 V6.3.1 IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 20: OFDMA TDD WMAN (Mobile WiMAXTM) TDD Base Stations (BS) |
14.10.2016 |
|
|
Article 3(2) |
|
ETSI |
EN 301 908-21 V6.1.1 IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 21: OFDMA TDD WMAN (Mobile WiMAXTM) FDD User Equipment (UE) |
14.10.2016 |
|
|
Article 3(2) |
|
ETSI |
EN 301 908-22 V6.1.1 IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 22: OFDMA TDD WMAN (Mobile WiMAXTM) FDD Base Stations (BS) |
9.12.2016 |
|
|
Article 3(2) |
|
ETSI |
EN 301 929 V2.1.1 VHF transmitters and receivers as Coast Stations for GMDSS and other applications in the maritime mobile service; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
12.4.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 302 017 V2.1.1 Transmitting equipment for the Amplitude Modulated (AM) sound broadcasting service; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
12.5.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 302 018 V2.1.1 Transmitting equipment for the Frequency Modulated (FM) sound broadcasting service; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
8.6.2017 |
EN 302 018-2 V1.2.1 Note 2.1 |
31.12.2018 |
Article 3(2) |
|
ETSI |
EN 302 018-2 V1.2.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Transmitting equipment for the Frequency Modulated (FM) sound broadcasting service; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive |
12.4.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 302 054 V2.1.1 Meteorological Aids (Met Aids); Radiosondes to be used in the 400,15 MHz to 406 MHz frequency range with power levels ranging up to 200 mW; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
This is the first publication |
EN 302 054-2 V1.2.1 Note 2.1 |
31.5.2018 |
Article 3(2) |
|
ETSI |
EN 302 054-2 V1.2.1 Meteorological Aids (Met Aids); Radiosondes to be used in the 400,15 MHz to 406 MHz frequency range with power levels ranging up to 200 mW; Part 2: Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
13.1.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 302 064-2 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Wireless Video Links (WVL) operating in the 1,3 GHz to 50 GHz frequency band; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive |
8.6.2017 |
|
|
Article 3(2) |
|
This harmonised standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters. |
|||||
|
ETSI |
EN 302 065-1 V2.1.1 Short Range Devices (SRD) using Ultra Wide Band technology (UWB); Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 1: Requirements for Generic UWB applications |
10.3.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 302 065-2 V2.1.1 Short Range Devices (SRD) using Ultra Wide Band technology (UWB); Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 2: Requirements for UWB location tracking |
10.3.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 302 065-3 V2.1.1 Short Range Devices (SRD) using Ultra Wide Band technology (UWB); Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 3: Requirements for UWB devices for ground based vehicular applications |
10.3.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 302 065-4 V1.1.1 Short Range Devices (SRD) using Ultra Wide Band technology (UWB); Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 4: Material Sensing devices using UWB technology below 10,6 GHz |
12.4.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 302 066-2 V1.2.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Ground- and Wall- Probing Radar applications (GPR/WPR) imaging systems; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive |
8.6.2017 |
|
|
Article 3(2) |
|
This harmonised standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters. |
|||||
|
ETSI |
EN 302 077-2 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Transmitting equipment for the Terrestrial — Digital Audio Broadcasting (T-DAB) service; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive |
12.4.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 302 186 V2.1.1 Satellite Earth Stations and Systems (SES); Harmonised Standard for satellite mobile Aircraft Earth Stations (AESs) operating in the 11/12/14 GHz frequency bands covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
12.4.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 302 194-2 V1.1.2 Electromagnetic compatibility and Radio spectrum Matters (ERM); Navigation radar used on inland waterways; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive |
8.6.2017 |
|
|
Article 3(2) |
|
This harmonised standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters. |
|||||
|
ETSI |
EN 302 195 V2.1.1 Short Range Devices (SRD); Ultra Low Power Active Medical Implants (ULP-AMI) and accessories (ULP-AMI-P) operating in the frequency range 9 kHz to 315 kHz Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
11.11.2016 |
|
|
Article 3(2) |
|
ETSI |
EN 302 208 V3.1.1 Radio Frequency Identification Equipment operating in the band 865 MHz to 868 MHz with power levels up to 2 W and in the band 915 MHz to 921 MHz with power levels up to 4 W; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
12.4.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 302 217-2 V3.1.1 Fixed Radio Systems; Characteristics and requirements for point-to-point equipment and antennas; Part 2: Digital systems operating in frequency bands from 1 GHz to 86 GHz; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
8.6.2017 |
EN 302 217-2-2 V2.2.1 Note 2.1 |
31.12.2018 |
Article 3(2) |
|
ETSI |
EN 302 217-2-2 V2.2.1 Fixed Radio Systems; Characteristics and requirements for point-to-point equipment and antennas; Part 2-2: Digital systems operating in frequency bands where frequency coordination is applied; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
12.4.2017 |
|
|
Article 3(2) |
|
Notice: This harmonised standard provides presumption of conformity with the essential requirements of Directive 2014/53/EU if also the receiving parameters in clause(s) 4.3.1, 4.3.2, 4.3.3 and 4.3.4 are applied |
|||||
|
ETSI |
EN 302 245-2 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Transmitting equipment for the Digital Radio Mondiale (DRM) broadcasting service Part 2: Harmonized EN under article 3.2 of the R&TTE Directive |
12.4.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 302 248 V2.1.1 Navigation radar for use on non-SOLAS vessels; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
10.3.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 302 264-2 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices; Road Transport and Traffic Telematics (RTTT); Short Range Radar equipment operating in the 77 GHz to 81 GHz band; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
8.6.2017 |
|
|
Article 3(2) |
|
This harmonised standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters. |
|||||
|
ETSI |
EN 302 288-2 V1.6.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices; Road Transport and Traffic Telematics (RTTT); Short range radar equipment operating in the 24 GHz range; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
8.6.2017 |
|
|
Article 3(2) |
|
This harmonised standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters. |
|||||
|
ETSI |
EN 302 296-2 V1.2.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Transmitting equipment for the digital television broadcast service, Terrestrial (DVB-T); Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
12.4.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 302 326-2 V1.2.2 Fixed Radio Systems; Multipoint Equipment and Antennas; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive for Digital Multipoint Radio Equipment |
12.4.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 302 340 V2.1.1 Satellite Earth Stations and Systems (SES); Harmonised Standard for satellite Earth Stations on board Vessels (ESVs) operating in the 11/12/14 GHz frequency bands allocated to the Fixed Satellite Service (FSS) covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
12.4.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 302 372 V2.1.1 Short Range Devices (SRD); Tank Level Probing Radar (TLPR) equipment operating in the frequency ranges 4,5 GHz to 7 GHz, 8,5 GHz to 10,6 GHz, 24,05 GHz to 27 GHz, 57 GHz to 64 GHz, 75 GHz to 85 GHz; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
10.3.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 302 448 V2.1.1 Satellite Earth Stations and Systems (SES); Harmonised Standard for tracking Earth Stations on Trains (ESTs) operating in the 14/12 GHz frequency bands covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
12.4.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 302 454 V2.1.1 Meteorological Aids (Met Aids); Radiosondes to be used in the 1 668,4 MHz to 1 690 MHz frequency range; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
This is the first publication |
EN 302 454-2 V1.2.1 Note 2.1 |
31.5.2018 |
Article 3(2) |
|
ETSI |
EN 302 454-2 V1.2.1 Meteorological Aids (Met Aids); Radiosondes to be used in the 1 668,4 MHz to 1 690 MHz frequency range; Part 2: Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
13.1.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 302 480 V2.1.2 Mobile Communication On Board Aircraft (MCOBA) systems; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
10.3.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 302 502 V2.1.1 Wireless Access Systems (WAS); 5,8 GHz fixed broadband data transmitting systems; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
12.5.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 302 510-2 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Radio equipment in the frequency range 30 MHz to 37,5 MHz for Ultra Low Power Active Medical Membrane Implants and Accessories; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive |
8.6.2017 |
|
|
Article 3(2) |
|
This harmonised standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters. |
|||||
|
ETSI |
EN 302 536-2 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Radio equipment in the frequency range 315 kHz to 600 kHz; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive |
8.6.2017 |
|
|
Article 3(2) |
|
This harmonised standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters. |
|||||
|
ETSI |
EN 302 537 V2.1.1 Ultra Low Power Medical Data Service (MEDS) Systems operating in the frequency range 401 MHz to 402 MHz and 405 MHz to 406 MHz; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
13.1.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 302 561 V2.1.1 Land Mobile Service; Radio equipment using constant or non-constant envelope modulation operating in a channel bandwidth of 25 kHz, 50 kHz, 100 kHz or 150 kHz; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
12.4.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 302 567 V1.2.1 Broadband Radio Access Networks (BRAN); 60 GHz Multiple-Gigabit WAS/RLAN Systems; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
8.6.2017 |
|
|
Article 3(2) |
|
This harmonised standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters. |
|||||
|
ETSI |
EN 302 571 V2.1.1 Intelligent Transport Systems (ITS); Radiocommunications equipment operating in the 5 855 MHz to 5 925 MHz frequency band; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
8.6.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 302 574-1 V2.1.2 Satellite Earth Stations and Systems (SES); Harmonised Standard for Mobile Earth Stations (MES) operating in the 1 980 MHz to 2 010 MHz (earth-to-space) and 2 170 MHz to 2 200 MHz (space-to-earth) frequency bands covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 1: Complementary Ground Component (CGC) for wideband systems |
12.4.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 302 574-2 V2.1.2 Satellite Earth Stations and Systems (SES); Harmonised Standard for Mobile Earth Stations (MES) operating in the 1 980 MHz to 2 010 MHz (earth-to-space) and 2 170 MHz to 2 200 MHz (space-to-earth) frequency bands covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 2: User Equipment (UE) for wideband systems |
12.4.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 302 574-3 V2.1.1 Satellite Earth Stations and Systems (SES); Harmonised Standard for Mobile Earth Stations (MES) operating in the 1 980 MHz to 2 010 MHz (earth-to-space) and 2 170 MHz to 2 200 MHz (space-to-earth) frequency bands covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 3: User Equipment (UE) for narrowband systems |
12.4.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 302 608 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Radio equipment for Eurobalise railway systems; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
8.6.2017 |
|
|
Article 3(2) |
|
This harmonised standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters. |
|||||
|
ETSI |
EN 302 609 V2.1.1 Short Range Devices (SRD); Radio equipment for Euroloop railway systems; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
8.6.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 302 617-2 V2.1.1 Ground-based UHF radio transmitters, receivers and transceivers for the UHF aeronautical mobile service using amplitude modulation; Part 2: Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
13.1.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 302 686 V1.1.1 Intelligent Transport Systems (ITS); Radiocommunications equipment operating in the 63 GHz to 64 GHz frequency band; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
8.6.2017 |
|
|
Article 3(2) |
|
This harmonised standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters. |
|||||
|
ETSI |
EN 302 729 V2.1.1 Short Range Devices (SRD); Level Probing Radar (LPR) equipment operating in the frequency ranges 6 GHz to 8,5 GHz, 24,05 GHz to 26,5 GHz, 57 GHz to 64 GHz, 75 GHz to 85 GHz; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
12.5.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 302 752 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Active radar target enhancers; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
8.6.2017 |
|
|
Article 3(2) |
|
This harmonised standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters. |
|||||
|
ETSI |
EN 302 858-2 V1.3.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Road Transport and Traffic Telematics (RTTT); Automotive radar equipment operating in the 24,05 GHz up to 24,25 GHz or 24,50 GHz frequency range; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
8.6.2017 |
|
|
Article 3(2) |
|
This harmonised standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters. |
|||||
|
ETSI |
EN 302 885 V2.1.1 Portable Very High Frequency (VHF) radiotelephone equipment for the maritime mobile service operating in the VHF bands with integrated handheld class D DSC; Harmonised Standard covering the essential requirements of articles 3.2 and 3.3(g) of the Directive 2014/53/EU |
13.1.2017 |
|
|
Article 3(2); Article 3(3)(g) |
|
ETSI |
EN 302 885 V2.2.2 Portable Very High Frequency (VHF) radiotelephone equipment for the maritime mobile service operating in the VHF bands with integrated handheld class H DSC; Harmonised Standard covering the essential requirements of articles 3.2 and 3.3(g) of Directive 2014/53/EU |
12.4.2017 |
EN 302 885 V2.1.1 Note 2.1 |
31.12.2018 |
Article 3(2); Article 3(3)(g) |
|
ETSI |
EN 302 885 V2.2.3 Portable Very High Frequency (VHF) radiotelephone equipment for the maritime mobile service operating in the VHF bands with integrated handheld class H DSC; Harmonised Standard covering the essential requirements of articles 3.2 and 3.3(g) of Directive 2014/53/EU |
12.5.2017 |
EN 302 885 V2.2.2 Note 2.1 |
31.1.2019 |
Article 3(2); Article 3(3)(g) |
|
ETSI |
EN 302 961 V2.1.2 Maritime Personal Homing Beacon intended for use on the frequency 121,5 MHz for search and rescue purposes only; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
11.11.2016 |
|
|
Article 3(2) |
|
ETSI |
EN 302 977 V2.1.1 Satellite Earth Stations and Systems (SES); Harmonised Standard for Vehicle-Mounted Earth Stations (VMES) operating in the 14/12 GHz frequency bands covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
12.4.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 303 039 V2.1.2 Land Mobile Service; Multichannel transmitter specification for the PMR Service; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
11.11.2016 |
|
|
Article 3(2) |
|
ETSI |
EN 303 084 V2.1.1 Ground Based Augmentation System (GBAS) VHF ground-air Data Broadcast (VDB); Technical characteristics and methods of measurement for ground-based equipment; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
11.11.2016 |
|
|
Article 3(2) |
|
ETSI |
EN 303 098 V2.1.1 Maritime low power personal locating devices employing AIS; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
13.1.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 303 132 V1.1.1 Maritime low power VHF personal locating beacons employing Digital Selective Calling (DSC); Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
12.5.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 303 135 V2.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Coastal Surveillance, Vessel Traffic Services and Harbour Radars (CS/VTS/HR); Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
13.1.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 303 203 V2.1.1 Short Range Devices (SRD); Medical Body Area Network Systems (MBANSs) operating in the 2 483,5 MHz to 2 500 MHz range; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
12.8.2016 |
|
|
Article 3(2) |
|
ETSI |
EN 303 204 V2.1.2 Network Based Short Range Devices (SRD); Radio equipment to be used in the 870 MHz to 876 MHz frequency range with power levels ranging up to 500 mW; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
11.11.2016 |
|
|
Article 3(2) |
|
ETSI |
EN 303 213-6-1 V2.1.1 Advanced Surface Movement Guidance and Control System (A-SMGCS); Part 6: Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU for deployed surface movement radar sensors; Sub-part 1: X-band sensors using pulsed signals and transmitting power up to 100 kW |
13.1.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 303 276 V1.1.1 Maritime Broadband Radiolink operating within the bands 5 852 MHz to 5 872 MHz and/or 5 880 MHz to 5 900 MHz for ships and off-shore installations engaged in coordinated activities; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
This is the first publication |
|
|
Article 3(2) |
|
ETSI |
EN 303 339 V1.1.1 Broadband Direct Air-to-Ground Communications; Equipment operating in the 1 900 MHz to 1 920 MHz and 5 855 MHz to 5 875 MHz frequency bands; Fixed pattern antennas; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
11.11.2016 |
|
|
Article 3(2) |
|
ETSI |
EN 303 340 V1.1.2 Digital Terrestrial TV Broadcast Receivers; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
11.11.2016 |
|
|
Article 3(2) |
|
ETSI |
EN 303 354 V1.1.1 Amplifiers and active antennas for TV broadcast reception in domestic premises; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
12.5.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 303 372-1 V1.1.1 Satellite Earth Stations and Systems (SES); Satellite broadcast reception equipment; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 1: Outdoor unit receiving in the 10,7 GHz to 12,75 GHz frequency band |
13.1.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 303 372-2 V1.1.1 Satellite Earth Stations and Systems (SES); Satellite broadcast reception equipment; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 2: Indoor unit |
9.9.2016 |
|
|
Article 3(2) |
|
ETSI |
EN 303 402 V2.1.2 Maritime mobile transmitters and receivers for use in the MF and HF bands; Harmonised Standard covering the essential requirements of articles 3.2 and 3.3(g) of Directive 2014/53/EU |
13.10.2017 |
|
|
Article 3(2);Article 3(3)(g) |
|
ETSI |
EN 303 406 V1.1.1 Short Range Devices (SRD); Social Alarms Equipment operating in the frequency range 25 MHz to 1 000 MHz; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
12.4.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 303 413 V1.1.1 Satellite Earth Stations and Systems (SES); Global Navigation Satellite System (GNSS) receivers; Radio equipment operating in the 1 164 MHz to 1 300 MHz and 1 559 MHz to 1 610 MHz frequency bands; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
This is the first publication |
|
|
Article 3(2) |
|
ETSI |
EN 303 609 V12.5.1 Global System for Mobile communications (GSM); GSM Repeaters; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
13.1.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 303 978 V2.1.2 Satellite Earth Stations and Systems (SES); Harmonised Standard for Earth Stations on Mobile Platforms (ESOMP) transmitting towards satellites in geostationary orbit, operating in the 27,5 GHz to 30,0 GHz frequency bands covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
11.11.2016 |
|
|
Article 3(2) |
|
ETSI |
EN 303 979 V2.1.2 Satellite Earth Stations and Systems (SES); Harmonised Standard for Earth Stations on Mobile Platforms (ESOMP) transmitting towards satellites in non-geostationary orbit, operating in the 27,5 GHz to 29,1 GHz and 29,5 GHz to 30,0 GHz frequency bands covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
11.11.2016 |
|
|
Article 3(2) |
|
ETSI |
EN 305 550-2 V1.2.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Radio equipment to be used in the 40 GHz to 246 GHz frequency range; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
8.6.2017 |
|
|
Article 3(2) |
|
This harmonised standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters. |
|||||
|
Note 1: |
Generally the date of cessation of presumption of conformity will be the date of withdrawal (‘dow’), set by the European standardisation organisation, but attention of users of these standards is drawn to the fact that in certain exceptional cases this can be otherwise. |
|
Note 2.1: |
The new (or amended) standard has the same scope as the superseded standard. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
|
Note 2.2: |
The new standard has a broader scope than the superseded standard. On the date stated the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
|
Note 2.3: |
The new standard has a narrower scope than the superseded standard. On the date stated the (partially) superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation for those products or services that fall within the scope of the new standard. Presumption of conformity with the essential or other requirements of the relevant Union legislation for products or services that still fall within the scope of the (partially) superseded standard, but that do not fall within the scope of the new standard, is unaffected. |
|
Note 3: |
In case of amendments, the referenced standard is EN CCCCC:YYYY, its previous amendments, if any, and the new, quoted amendment. The superseded standard therefore consists of EN CCCCC:YYYY and its previous amendments, if any, but without the new quoted amendment. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
NOTE:
|
— |
Any information concerning the availability of the standards can be obtained either from the European standardisation organisations or from the national standardisation bodies the list of which is published in the Official Journal of the European Union according to Article 27 of the Regulation (EU) No1025/2012 (4). |
|
— |
Standards are adopted by the European standardisation organisations in English (CEN and Cenelec also publish in French and German). Subsequently, the titles of the standards are translated into all other required official languages of the European Union by the national standardisation bodies. The European Commission is not responsible for the correctness of the titles which have been presented for publication in the Official Journal. |
|
— |
References to Corrigenda ‘…/AC:YYYY’ are published for information only. A Corrigendum removes printing, linguistic or similar errors from the text of a standard and may relate to one or more language versions (English, French and/or German) of a standard as adopted by a European standardisation organisation. |
|
— |
Publication of the references in the Official Journal of the European Union does not imply that the standards are available in all the official languages of the European Union. |
|
— |
This list replaces all the previous lists published in the Official Journal of the European Union under Directive 1999/5/EC and Directive 2014/53/EU. The European Commission ensures the updating of this list. |
|
— |
More information about harmonised standards and other European standards on the Internet at: http://ec.europa.eu/growth/single-market/european-standards/harmonised-standards/index_en.htm |
(1) OJ L 153, 22.5.2014, p. 62.
(3) ESO: European standardisation organisation:
|
— |
CEN: Avenue Marnix 17, 1000 Bruxelles/Brussel, BELGIQUE/BELGIË. Tel. +32 25500811. Fax +32 25500819 (http://www.cen.eu) |
|
— |
CENELEC: Avenue Marnix 17, 1000 Bruxelles/Brussel, BELGIQUE/BELGIË. Tel. +32 25196871. Fax +32 25196919 (http://www.cenelec.eu) |
|
— |
ETSI: 650, route des Lucioles, 06921 Sophia Antipolis, FRANCE. Tel. +33 492944200. Fax +33 493654716, (http://www.etsi.eu) |
(4) OJ C 338, 27.9.2014, p. 31.
|
15.12.2017 |
EN |
Official Journal of the European Union |
C 435/144 |
Commission communication in the framework of the implementation of Directive 2013/53/EU of the European Parliament and of the Council on recreational craft and personal watercraft and repealing Directive 94/25/EC
(Publication of titles and references of harmonised standards under Union harmonisation legislation)
(Text with EEA relevance)
(2017/C 435/06)
|
ESO (1) |
Reference and title of the standard (and reference document) |
First publication OJ |
Reference of superseded standard |
Date of cessation of presumption of conformity of superseded standard Note 1 |
|
(1) |
(2) |
(3) |
(4) |
(5) |
|
CEN |
EN ISO 6185-1:2001 Inflatable boats — Part 1: Boats with a maximum motor power rating of 4,5 kW (ISO 6185-1:2001) |
12.2.2016 |
|
|
|
CEN |
EN ISO 6185-2:2001 Inflatable boats — Part 2: Boats with a maximum motor power rating of 4,5 kW to 15 kW inclusive (ISO 6185-2:2001) |
12.2.2016 |
|
|
|
CEN |
EN ISO 6185-3:2014 Inflatable boats — Part 3: Boats with a hull length less than 8 m with a motor rating of 15 kW and greater (ISO 6185-3:2014) |
12.2.2016 |
|
|
|
CEN |
EN ISO 6185-4:2011 Inflatable boats — Part 4: Boats with a hull length of between 8 m and 24 m with a motor power rating of 15 kW and greater (ISO 6185-4:2011, Corrected version 2014-08-01) |
12.2.2016 |
|
|
|
CEN |
EN ISO 7840:2013 Small craft — Fire-resistant fuel hoses (ISO 7840:2013) |
12.2.2016 |
|
|
|
CEN |
EN ISO 8469:2013 Small craft — Non-fire-resistant fuel hoses (ISO 8469:2013) |
12.2.2016 |
|
|
|
CEN |
EN ISO 8665:2017 Small craft — Marine propulsion reciprocating internal combustion engines — Power measurements and declarations (ISO 8665:2006) |
This is the first publication |
EN ISO 8665:2006 Note 2.1 |
28.2.2018 |
|
CEN |
EN ISO 8666:2002 Small craft — Principal data (ISO 8666:2002) |
12.2.2016 |
|
|
|
CEN |
EN ISO 8846:2017 Small craft — Electrical devices — Protection against ignition of surrounding flammable gases (ISO 8846:1990) |
This is the first publication |
EN 28846:1993 Note 2.1 |
23.2.2018 |
|
CEN |
EN ISO 8847:2017 Small craft — Steering gear — Cable and pulley systems (ISO 8847:2004) |
This is the first publication |
EN ISO 8847:2004 Note 2.1 |
28.2.2018 |
|
CEN |
EN ISO 8848:2017 Small craft — Remote steering systems (ISO 8848:1990) |
This is the first publication |
EN 28848:1993 Note 2.1 |
28.2.2018 |
|
CEN |
EN ISO 8849:2003 Small craft — Electrically operated direct-current bilge-pumps (ISO 8849:2003) |
12.2.2016 |
|
|
|
CEN |
EN ISO 9093-1:1997 Small craft — Seacocks and through-hull fittings — Part 1: Metallic (ISO 9093-1:1994) |
12.2.2016 |
|
|
|
CEN |
EN ISO 9093-2:2002 Small craft — Seacocks and through-hull fittings — Part 2: Non-metallic (ISO 9093-2:2002) |
12.2.2016 |
|
|
|
CEN |
EN ISO 9094:2017 Small craft — Fire protection (ISO 9094:2015) |
This is the first publication |
|
|
|
CEN |
EN ISO 9097:2017 Small craft — Electric fans (ISO 9097:1991) |
This is the first publication |
EN ISO 9097:1994 Note 2.1 |
28.2.2018 |
|
CEN |
EN ISO 9775:2017 Small craft — Remote steering systems for single outboard motors of 15 kW to 40 kW power (ISO 9775:1990) |
This is the first publication |
EN 29775:1993 Note 2.1 |
28.2.2018 |
|
CEN |
EN ISO 10088:2017 Small craft — Permanently installed fuel systems (ISO 10088:2013) |
This is the first publication |
EN ISO 10088:2013 Note 2.1 |
28.2.2018 |
|
CEN |
EN ISO 10133:2017 Small craft — Electrical systems — Extra-low-voltage d.c. installations (ISO 10133:2012) |
This is the first publication |
EN ISO 10133:2012 Note 2.1 |
28.2.2018 |
|
CEN |
EN ISO 10239:2017 Small craft — Liquefied petroleum gas (LPG) systems (ISO 10239:2014) |
This is the first publication |
EN ISO 10239:2014 Note 2.1 |
28.2.2018 |
|
CEN |
EN ISO 10592:2017 Small craft — Hydraulic steering systems (ISO 10592:1994) |
This is the first publication |
EN ISO 10592:1995 Note 2.1 |
28.2.2018 |
|
CEN |
EN ISO 11105:2017 Small craft — Ventilation of petrol engine and/or petrol tank compartments (ISO 11105:1997) |
This is the first publication |
EN ISO 11105:1997 Note 2.1 |
31.3.2018 |
|
CEN |
EN ISO 11192:2005 Small craft — Graphical symbols (ISO 11192:2005) |
12.2.2016 |
|
|
|
CEN |
EN ISO 11547:1995 Small craft — Start-in-gear protection (ISO 11547:1994) |
12.2.2016 |
|
|
|
|
EN ISO 11547:1995/A1:2000 |
12.2.2016 |
Note 3 |
|
|
CEN |
EN ISO 11592-1:2016 Small craft — Determination of maximum propulsion power rating using manoeuvring speed — Part 1: Craft with a length of hull less than 8 m (ISO 11592-1:2016) |
10.6.2016 |
EN ISO 11592:2001 Note 2.1 |
|
|
CEN |
EN ISO 11812:2001 Small craft — Watertight cockpits and quick-draining cockpits (ISO 11812:2001) |
12.2.2016 |
|
|
|
CEN |
EN ISO 12215-1:2000 Small craft — Hull construction and scantlings — Part 1: Materials: Thermosetting resins, glass-fibre reinforcement, reference laminate (ISO 12215-1:2000) |
12.2.2016 |
|
|
|
CEN |
EN ISO 12215-2:2002 Small craft — Hull construction and scantlings — Part 2: Materials: Core materials for sandwich construction, embedded materials (ISO 12215-2:2002) |
12.2.2016 |
|
|
|
CEN |
EN ISO 12215-3:2002 Small craft — Hull construction and scantlings — Part 3: Materials: Steel, aluminium alloys, wood, other materials (ISO 12215-3:2002) |
12.2.2016 |
|
|
|
CEN |
EN ISO 12215-4:2002 Small craft — Hull construction and scantlings — Part 4: Workshop and manufacturing (ISO 12215-4:2002) |
12.2.2016 |
|
|
|
CEN |
EN ISO 12215-5:2008 Small craft — Hull construction and scantlings — Part 5: Design pressures for monohulls, design stresses, scantlings determination (ISO 12215-5:2008) |
12.2.2016 |
|
|
|
|
EN ISO 12215-5:2008/A1:2014 |
12.2.2016 |
Note 3 |
|
|
CEN |
EN ISO 12215-6:2008 Small craft — Hull construction and scantlings — Part 6: Structural arrangements and details (ISO 12215-6:2008) |
12.2.2016 |
|
|
|
CEN |
EN ISO 12215-8:2009 Small craft — Hull construction and scantlings — Part 8: Rudders (ISO 12215-8:2009) |
12.2.2016 |
|
|
|
|
EN ISO 12215-8:2009/AC:2010 |
12.2.2016 |
|
|
|
CEN |
EN ISO 12215-9:2012 Small craft — Hull construction and scantlings — Part 9: Sailing craft appendages (ISO 12215-9:2012) |
12.2.2016 |
|
|
|
CEN |
EN ISO 12216:2002 Small craft — Windows, portlights, hatches, deadlights and doors — Strength and watertightness requirements (ISO 12216:2002) |
12.2.2016 |
|
|
|
CEN |
EN ISO 12217-1:2017 Small craft — Stability and buoyancy assessment and categorization — Part 1: Non-sailing boats of hull length greater than or equal to 6 m (ISO 12217-1:2015) |
This is the first publication |
EN ISO 12217-1:2015 Note 2.1 |
31.3.2018 |
|
CEN |
EN ISO 12217-2:2017 Small craft — Stability and buoyancy assessment and categorization — Part 2: Sailing boats of hull length greater than or equal to 6 m (ISO 12217-2:2015) |
This is the first publication |
EN ISO 12217-2:2015 Note 2.1 |
31.3.2018 |
|
CEN |
EN ISO 12217-3:2017 Small craft — Stability and buoyancy assessment and categorization — Part 3: Boats of hull length less than 6 m (ISO 12217-3:2015) |
This is the first publication |
EN ISO 12217-3:2015 Note 2.1 |
28.2.2018 |
|
CEN |
EN ISO 13297:2014 Small craft — Electrical systems — Alternating current installations (ISO 13297:2014) |
12.2.2016 |
|
|
|
CEN |
EN ISO 13590:2003 Small craft — Personal watercraft — Construction and system installation requirements (ISO 13590:2003) |
12.2.2016 |
|
|
|
|
EN ISO 13590:2003/AC:2004 |
12.2.2016 |
|
|
|
CEN |
EN ISO 13929:2017 Small craft — Steering gear — Geared link systems (ISO 13929:2001) |
This is the first publication |
EN ISO 13929:2001 Note 2.1 |
28.2.2018 |
|
CEN |
EN ISO 14509-1:2008 Small craft — Airborne sound emitted by powered recreational craft — Part 1: Pass-by measurement procedures (ISO 14509-1:2008) |
12.2.2016 |
|
|
|
CEN |
EN ISO 14509-3:2009 Small craft — Airborne sound emitted by powered recreational craft — Part 3: Sound assessment using calculation and measurement procedures (ISO 14509-3:2009) |
12.2.2016 |
|
|
|
CEN |
EN ISO 14895:2016 Small craft — Liquid-fuelled galley stoves and heating appliances (ISO 14895:2016) |
9.9.2016 |
EN ISO 14895:2003 Note 2.1 |
|
|
CEN |
EN ISO 14946:2001 Small craft — Maximum load capacity (ISO 14946:2001) |
12.2.2016 |
|
|
|
|
EN ISO 14946:2001/AC:2005 |
12.2.2016 |
|
|
|
CEN |
EN ISO 15083:2003 Small craft — Bilge-pumping systems (ISO 15083:2003) |
12.2.2016 |
|
|
|
CEN |
EN ISO 15084:2003 Small craft — Anchoring, mooring and towing — Strong points (ISO 15084:2003) |
12.2.2016 |
|
|
|
CEN |
EN ISO 15584:2017 Small craft — Inboard petrol engines — Engine-mounted fuel and electrical components (ISO 15584:2001) |
This is the first publication |
EN ISO 15584:2001 Note 2.1 |
28.2.2018 |
|
CEN |
EN 15609:2012 LPG equipment and accessories — LPG propulsion systems for boats, yachts and other craft |
12.2.2016 |
|
|
|
CEN |
EN ISO 15652:2017 Small craft — Remote steering systems for inboard mini jet boats (ISO 15652:2003) |
This is the first publication |
EN ISO 15652:2005 Note 2.1 |
28.2.2018 |
|
CEN |
EN ISO 16147:2017 Small craft — Inboard diesel engines — Engine-mounted fuel and electrical components (ISO 16147:2002, including Amd 1:2013) |
This is the first publication |
EN ISO 16147:2002 Note 2.1 |
28.2.2018 |
|
CEN |
EN ISO 16180:2013 Small craft — Navigation lights — Installation, placement and visibility (ISO 16180:2013) |
12.2.2016 |
|
|
|
CEN |
EN ISO 16315:2016 Small craft — Electric propulsion system (ISO 16315:2016) |
9.9.2016 |
|
|
|
CEN |
EN ISO 18854:2015 Small craft — Reciprocating internal combustion engines exhaust emission measurement — Test-bed measurement of gaseous and particulate exhaust emissions (ISO 18854:2015) |
12.2.2016 |
|
|
|
CEN |
EN ISO 19009:2015 Small craft — Electric navigation lights — Performance of LED lights (ISO 19009:2015) |
12.2.2016 |
|
|
|
CEN |
EN ISO 21487:2012 Small craft — Permanently installed petrol and diesel fuel tanks (ISO 21487:2012) |
12.2.2016 |
|
|
|
|
EN ISO 21487:2012/A1:2014 |
12.2.2016 |
Note 3 |
|
|
|
EN ISO 21487:2012/A2:2015 |
10.6.2016 |
Note 3 |
|
|
CEN |
EN ISO 25197:2012 Small craft — Electrical/electronic control systems for steering, shift and throttle (ISO 25197:2012) |
12.2.2016 |
|
|
|
|
EN ISO 25197:2012/A1:2014 |
12.2.2016 |
Note 3 |
|
|
Cenelec |
EN 60092-507:2015 Electrical installations in ships — Part 507 — Small vessels IEC 60092-507:2014 |
12.2.2016 |
|
|
|
Note 1: |
Generally the date of cessation of presumption of conformity will be the date of withdrawal (‘dow’), set by the European standardisation organisation, but attention of users of these standards is drawn to the fact that in certain exceptional cases this can be otherwise. |
|
Note 2.1: |
The new (or amended) standard has the same scope as the superseded standard. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
|
Note 2.2: |
The new standard has a broader scope than the superseded standard. On the date stated the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
|
Note 2.3: |
The new standard has a narrower scope than the superseded standard. On the date stated the (partially) superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation for those products or services that fall within the scope of the new standard. Presumption of conformity with the essential or other requirements of the relevant Union legislation for products or services that still fall within the scope of the (partially) superseded standard, but that do not fall within the scope of the new standard, is unaffected. |
|
Note 3: |
In case of amendments, the referenced standard is EN CCCCC:YYYY, its previous amendments, if any, and the new, quoted amendment. The superseded standard therefore consists of EN CCCCC:YYYY and its previous amendments, if any, but without the new quoted amendment. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
NOTE:
|
— |
Any information concerning the availability of the standards can be obtained either from the European standardisation organisations or from the national standardisation bodies the list of which is published in the Official Journal of the European Union according to Article 27 of the Regulation (EU) No 1025/2012 (2). |
|
— |
Standards are adopted by the European standardisation organisations in English (CEN and Cenelec also publish in French and German). Subsequently, the titles of the standards are translated into all other required official languages of the European Union by the national standardisation bodies. The European Commission is not responsible for the correctness of the titles which have been presented for publication in the Official Journal. |
|
— |
References to Corrigenda ‘…/AC:YYYY’ are published for information only. A Corrigendum removes printing, linguistic or similar errors from the text of a standard and may relate to one or more language versions (English, French and/or German) of a standard as adopted by a European standardisation organisation. |
|
— |
Publication of the references in the Official Journal of the European Union does not imply that the standards are available in all the official languages of the European Union. |
|
— |
This list replaces all the previous lists published in the Official Journal of the European Union. The European Commission ensures the updating of this list. |
|
— |
More information about harmonised standards and other European standards on the Internet at: http://ec.europa.eu/growth/single-market/european-standards/harmonised-standards/index_en.htm |
(1) ESO: European standardisation organisation:
|
— |
CEN: Avenue Marnix 17, B-1000, Brussels, Tel. +32 2 5500811; fax + 32 2 5500819 (http://www.cen.eu) |
|
— |
CENELEC: Avenue Marnix 17, B-1000, Brussels, Tel. +32 2 5196871; fax + 32 2 5196919 (http://www.cenelec.eu) |
|
— |
ETSI: 650, route des Lucioles, F-06921 Sophia Antipolis, Tel. +33 492 944200; fax +33 493 654716, (http://www.etsi.eu) |
(2) OJ C 338, 27.9.2014, p. 31.
|
15.12.2017 |
EN |
Official Journal of the European Union |
C 435/152 |
Commission communication in the framework of the implementation of Regulation (EU) No 305/2011 of the European Parliament and of the Council laying down harmonised conditions for the marketing of construction products and repealing Council Directive 89/106/EEC
(Publication of references of European Assessment Documents in accordance with Article 22 of Regulation (EU) No 305/2011)
(Text with EEA relevance)
(2017/C 435/07)
The provisions of Regulation (EU) No 305/2011 prevail over any conflicting provisions in the European Assessment Documents
|
Reference and title of the European Assessment Document |
Reference and title of the superseded European Assessment Document |
Remarks |
|
|
(1) |
(2) |
(3) |
(4) |
|
010001-00-0301 |
Precast concrete composite wall with point connectors |
|
|
|
020001-01-0405 |
Multi-axis concealed hinge assemblies |
020001-00-0405 |
|
|
020002-00-0404 |
Balcony (and terrace) glazing system without vertical frames |
|
|
|
020011-00-0405 |
Roof, floor, wall and ceiling hatches providing access or for use as an emergency door / with or without fire resistance |
|
|
|
020029-00-1102 |
Internal pedestrian fire resisting and/or smoke control single or double leaf doorsets made of steel |
|
|
|
030019-00-0402 |
Liquid applied roof waterproofing on the basis of polysiloxane |
|
|
|
030218-00-0402 |
Membrane for use as roof underlay |
|
|
|
040005-00-1201 |
Factory-made thermal and/or acoustic insulation products made of vegetable or animal fibres |
|
|
|
040007-00-1201 |
Thermal insulation product for buildings with radiant heat reflective component |
|
|
|
040016-00-0404 |
Glass fibre mesh for reinforcement of cement based renderings |
|
|
|
040037-00-1201 |
Low lambda composite boards made of mineral wool fibres and aerogel additives |
|
|
|
040048-00-0502 |
Rubber fibre mat to be used for impact sound insulation |
|
|
|
040065-00-1201 |
Thermal insulation and/or sound absorbing boards based on expanded polystyrene and cement |
|
|
|
040089-00-0404 |
External Thermal Insulation Composite Systems with renderings for the use on timber frame buildings |
|
|
|
040090-00-1201 |
Factory-made boards and products formed by moulding of an expanded polylactic acid (epla) for thermal and/ or acoustical insulation. |
|
|
|
040138-00-1201 |
In-situ formed loose fill thermal and/or acoustic insulation products made of vegetable fibres |
|
|
|
040288-00-1201 |
Factory-made thermal and acoustic insulations made of polyester fibres |
|
|
|
040313-00-1201 |
In-situ formed loose fill thermal and/or acoustic insulation product made of granulated expanded cork |
|
|
|
040369-00-1201 |
Insulation made of loose-fill or compound granulated expanded cork |
|
|
|
040456-00-1201 |
In-situ formed loose fill thermal and/or acoustic insulation material made of animal fibres |
|
|
|
040635-00-1201 |
Thermal and/or sound insulation based on bound expanded polystyrene bulk material |
|
|
|
040643-00-1201 |
Fibre reinforced silica aerogel thermal insulation |
|
|
|
040650-00-1201 |
Extruded polystyrene foam boards as load bearing layer and / or thermal insulation outside the waterproofing |
|
|
|
040777-00-1201 |
Cellular glass boards as load bearing layer and thermal insulation outside the waterproofing |
|
|
|
050009-00-0301 |
Spherical and cylindrical bearing with special sliding material made of fluoropolymer |
|
|
|
050013-00-0301 |
Spherical and cylindrical bearing with special sliding material made of filled PTFE with solid lubricant and reinforcing fibres |
|
|
|
060001-00-0802 |
Chimney kit with clay/ceramic flue liner with classification T400 (MINIMUM) N1 W3 GXX |
|
|
|
060003-00-0802 |
Chimney kit with clay/ceramic flue liner and with specific outer wall with classification T400 (minimum) N1 W3 GXX |
|
|
|
060008-00-0802 |
Chimney kit with clay/ceramic flue liner with classification T400 (minimum) N1/P1 W3 Gxx and with different outer walls and possible change of outer wall |
|
|
|
070001-01-0504 |
Gypsum plasterboards for load bearing applications |
070001-00-0504 |
|
|
070002-00-0505 |
Glass fibre joint tape for gypsum plasterboards |
|
|
|
080002-00-0102 |
Non-reinforcing hexagonal geogrid for the stabilization of unbound granular layers by way of interlock with the aggregate |
|
|
|
090001-00-0404 |
Pre-fabricated compressed mineral wool boards with organic or inorganic finish and with specified fastening system |
|
|
|
090017-00-0404 |
Point supported vertical glazing |
|
|
|
090020-00-0404 |
Kits for external wall claddings made of agglomerated stone |
|
|
|
090034-00-0404 |
Kit composed by subframe and fixings for fastening cladding and external wall elements |
|
|
|
090035-00-0404 |
Insulated glass unit with structural sealant punctually anchored |
|
|
|
090058-00-0404 |
Ventilated external wall cladding kit comprising a metallic honeycomb panel and its associated fixings |
|
|
|
120001-01-0106 |
Microprismatic retro-reflective sheetings |
120001-00-0106 |
|
|
120003-00-0106 |
Steel lighting columns |
|
|
|
120011-00-0107 |
Flexible plug expansion joints for road bridges with flexible filling based on a synthetic polymer as binder |
|
|
|
130002-00-0304 |
Solid wood slab element — element of dowel jointed timber boards to be used as a structural element in buildings |
|
|
|
130005-00-0304 |
Solid wood slab element to be used as a structural element in buildings |
|
|
|
130010-00-0304 |
Glued laminated timber made of hardwood — structural laminated veneer lumber made of beech |
|
|
|
130011-00-0304 |
Prefabricated wood slab element made of mechanically jointed square-sawn timber members to be used as a structural element in buildings |
|
|
|
130012-00-0304 |
Strength graded structural timber — Square edged logs with wane — Chestnut |
|
|
|
130013-00-0304 |
Solid wood slab element to be used as a structural element in buildings — element of timber boards jointed by dovetail connections |
|
|
|
130019-00-0603 |
Dowel-type fasteners with resin coating |
|
|
|
130022-00-0304 |
Monolithic or laminated beam and wall logs made of timber |
|
|
|
130033-00-0603 |
Nails and screws for use in nailing plates in timber structures |
|
|
|
130087-00-0204 |
Modular construction system |
|
|
|
130118-00-0603 |
Screws for use in timber constructions |
|
|
|
130166-00-0304 |
Strength graded structural timber — steam-cured solid timber with rectangular cross section which may be finger jointed or not — softwood |
|
|
|
130167-00-0304 |
Strength graded structural timber — Square edged logs with wane — Softwood |
|
|
|
130197-00-0304 |
Glued laminated timber made of steam-cured solid timber with rectangular cross section — Softwood |
|
|
|
150001-00-0301 |
Calcium Sulphoaluminate based Cement |
|
|
|
150002-00-0301 |
Calcium aluminate based refractory cement |
|
|
|
150003-00-0301 |
High strength cement |
|
|
|
150004-00-0301 |
Rapid hardening sulfate resistant calcium sulphoaluminate based cement |
|
|
|
150007-00-0301 |
Portland-pozzolana cement for use in tropical conditions |
|
|
|
150008-00-0301 |
Rapid setting cement |
|
|
|
150009-00-0301 |
Blast Furnace Cement CEM III/A with assessment of sulfate resistance (SR) and optional with low effective alkali content (LA) and/or low heat of hydration (LH) |
|
|
|
160004-00-0301 |
Post-tensioning kits for prestressing of structures |
ETAG 013-1 |
|
|
160027-00-0301 |
Special filling products for post-tensioning kits |
ETAG 013-2 |
|
|
180008-00-0704 |
Trapped gully — removable — mechanical closure |
|
|
|
190002-00-0502 |
Dry floating flooring kit based on prefabricated interlocked units made of ceramic tiles and rubber mats |
|
|
|
190005-00-0402 |
Terrace decking kit |
|
|
|
200001-00-0602 |
Prefabricated steel and stainless steel wire ropes with end connectors |
|
|
|
200002-00-0602 |
Tension rod system |
|
|
|
200005-00-0103 |
Structural steel piles with hollow sections and rigid splices |
|
|
|
200012-00-0401 |
Spacer kits for built-up metal roof and wall cladding |
|
|
|
200014-00-0103 |
Pile joints and rock shoes for concrete piles |
|
|
|
200017-00-0302 |
Hot rolled products and structural components made of steel grades Q235B, Q235D, Q345B AND Q345D |
|
|
|
200019-00-0102 |
Hexagonal woven mesh gabion boxes and matresses |
|
|
|
200020-00-0102 |
Weldmesh gabion boxes and mattresses |
|
|
|
200022-00-0302 |
Thermo-mechanically rolled long steel products made of weldable fine grain structural steel of special steel grades |
|
|
|
200026-00-0102 |
Steel wire mesh systems for reinforced fill |
|
|
|
200032-00-0602 |
Prefabricated tension rod systems with special end connectors |
|
|
|
200033-00-0602 |
Nailed Shear Connector |
|
|
|
200035-00-0302 |
Roof and wall systems with hidden fastenings |
|
|
|
200036-00-0103 |
Kit for micropiles — Kit with hollow bars for self-drilling micropiles — Hollow bars of seamless steel tubes |
|
|
|
200039-00-0102 |
Hexagonal woven mesh gabion boxes and mattresses with zinc coating |
|
|
|
200043-01-0103 |
Pile pipes made of ductile iron |
200043-00-0103 |
|
|
200050-00-0102 |
Gabion boxes, mattresses and sack gabions made of hexagonal regular twisted mesh with pre-coated zinc and/or zinc+organic coating |
|
|
|
200086-00-0602 |
Wire ring connection products |
|
|
|
210004-00-0805 |
Modular element for building services |
|
|
|
220006-00-0402 |
Roofing slates made of polypropylene, limestone and fillers |
|
|
|
220007-00-0402 |
Fully supported copper alloy sheet and strip for roofing, external cladding and internal lining |
|
|
|
220008-00-0402 |
Eaves profiles for terraces and balconies |
|
|
|
220010-00-0402 |
Flat plastic sheets for fully supported discontinuous roofing and external cladding |
|
|
|
220013-01-0401 |
Self–supporting ridgelight |
220013-00-0401 |
|
|
220018-00-0401 |
Decentralized energy efficient low-pressure ventilations unit with alternating flow and heat recovery |
|
|
|
220021-00-0402 |
Tubular daylighting devices (TDD) |
|
|
|
220022-00-0401 |
Polycarbonate snow stopper for roof |
|
|
|
220025-00-0401 |
Cantilevered Structural horizontal glazing (structural glass canopy/roof) |
|
|
|
220069-00-0402 |
Flat and profiled (with a pattern) plastic roofing sheets made of recycled material for fully supported discontinuous roofing |
|
|
|
230004-00-0106 |
Wire ring mesh panels |
|
|
|
230005-00-0106 |
Wire rope net panels |
|
|
|
230008-00-0106 |
Double twisted steel wire mesh reinforced or not with ropes |
|
|
|
230011-00-0106 |
Road marking products |
|
|
|
230012-00-0105 |
Additives for asphalt production — bitumen granules made from recycled bituminous roofing felt |
|
|
|
230025-00-0106 |
Flexible facing systems for slope stabilization and rock protection |
|
|
|
260001-00-0303 |
Structural sections made from fibre reinforced polymers (FRP/Glassfiber Composites) |
|
|
|
260002-00-0301 |
Alkali resistant glass fibres containing zirconium dioxide for the use in concrete |
|
|
|
260006-00-0301 |
Polymeric concrete addition |
|
|
|
260007-00-0301 |
Type I addition for concrete, mortar and screed materials — Aqueous solution |
|
|
|
280001-00-0704 |
Preassembled line unit for drainage or infiltration |
|
|
|
290001-00-0701 |
Kit for the transport of cold and hot water inside buildings |
|
|
|
320002-02-0605 |
Coated metal water stop sheet for construction and controlled crack joints in waterproof concrete |
320002-00-0605 320002-01-0605 |
|
|
320008-00-0605 |
Swellable joint sealing tape on the basis of bentonit for construction joints in watertight concrete |
|
|
|
330001-00-0602 |
Expanding Structural Bolting Assemblies for Blind Fastening |
|
|
|
330008-02-0601 |
Anchor channels |
330008-00-0601 330008-01-0601 |
|
|
330011-00-0601 |
Adjustable concrete screws |
|
|
|
330012-00-0601 |
Cast-in anchor with internal threaded socket |
|
|
|
330047-01-0602 |
Fastening screws for sandwich panels |
330047-00-0602 |
|
|
330075-00-0601 |
Elevator lifting device |
|
|
|
330076-00-0604 |
Metal injection anchors for use in masonry |
ETAG 29 |
|
|
330079-00-0602 |
Floor Fixing Assemblies for use in Checker Plate or Open Bar Grating |
|
|
|
330080-00-0602 |
High Slip Resistance Clamp (HSR) Assembly |
|
|
|
330083-01-0601 |
Power-actuated fastener for multiple use in concrete for non-structural applications |
330083-00-0601 |
|
|
330084-00-0601 |
Steel-plate with cast-in anchors |
|
|
|
330153-00-0602 |
Cartridge fired pin for connections of thin gauge steel members and sheeting |
|
|
|
330155-00-0602 |
Self-adjustable clamp assembly |
|
|
|
330196-01-0604 |
Plastic anchors made of virgin or non-virgin material for fixing of external thermal insulation composite systems with rendering |
330196-00-0604 ETAG 014 |
|
|
330232-00-0601 |
Mechanical fasteners for use in concrete |
ETAG 001-1 ETAG 001-2 ETAG 001-3 ETAG 001-4 |
|
|
330389-00-0601 |
Point connector made of glass fibre reinforced polymer for sandwich walls |
|
|
|
330499-00-0601 |
Bonded fasteners for use in concrete |
ETAG 001-5 |
|
|
330667-00-0602 |
Hot-rolled mounting channel |
|
|
|
330965-00-0601 |
Powder-actuated fastener for the fixing of ETICS in concrete |
|
|
|
340002-00-0204 |
Panels of steel wires with incorporated thermal insulation for a whole structure |
|
|
|
340006-00-0506 |
Prefabricated stair kits |
ETAG 008 |
|
|
340020-00-0106 |
Flexible kits for retaining debris flows and shallow landslides/open hill debris flows |
|
|
|
340025-00-0403 |
Substructure kit for heated buildings |
|
|
|
340037-00-0204 |
Light weight steel/wood load bearing roof elements |
|
|
|
350003-00-1109 |
Kit for fire resistant service ducts consisting of pre-fabricated connection pieces (made of mechanically pre-coated steel sheet) and accessories |
|
|
|
350005-00-1104 |
Intumescent products for fire sealing and fire stopping purposes |
|
|
|
350134-00-1104 |
Fire proof water trap with intumescent fire seal (combined with a stainless steel floor gully penetration |
|
|
|
350140-00-1106 |
Renderings and rendering kits for fire resisting applications |
ETAG 018-1 ETAG 018-3 |
|
|
350141-00-1106 |
Linear joint and gap seals |
ETAG 026-1 ETAG 026-3 |
|
|
350142-00-1106 |
Fire protective board, slab and mat products and kits |
ETAG 018-1 ETAG 018-4 |
|
|
350402-00-1101 |
Reactive coatings for fire protection of steel elements |
ETAG 018-1 ETAG 018-2 |
|
|
350454-00-1104 |
Penetration seals |
ETAG 026-1 ETAG 026-2 |
|
|
360005-00-0604 |
Cavity Tray |
|
|
NOTE:
European Assessment Documents (EADs) are adopted by the European Organisation for Technical Assessment (EOTA) in English. The European Commission is not responsible for the correctness of the titles which have been provided by EOTA for publication in the Official Journal of the European Union.
Publication of the references of European Assessment Documents in the Official Journal of the European Union does not imply that the European Assessment Documents are available in all the official languages of the European Union.
The European Organisation for Technical Assessment (http://www.eota.eu) shall keep the European Assessment Document available by electronic means in line with the provisions of point 8 of Annex II to Regulation (EU) No 305/2011.
This list replaces all the previous lists published in the Official Journal of the European Union. The European Commission ensures the updating of this list.