ISSN 1977-091X
doi:10.3000/1977091X.C_2011.338.eng
Official Journal
of the European Union
C 338
English edition
Information and Notices
Volume 54
18 November 2011
|
ISSN 1977-091X doi:10.3000/1977091X.C_2011.338.eng |
||
|
Official Journal of the European Union |
C 338 |
|
|
|
||
|
English edition |
Information and Notices |
Volume 54 |
|
|
|
|
|
(1) Text with EEA relevance |
|
EN |
|
IV Notices
NOTICES FROM EUROPEAN UNION INSTITUTIONS, BODIES, OFFICES AND AGENCIES
European Commission
|
18.11.2011 |
EN |
Official Journal of the European Union |
C 338/1 |
Commission communication in the framework of the implementation of Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC
(Text with EEA relevance)
(Publication of titles and references of harmonised standards under the directive)
2011/C 338/01
|
ESO (1) |
Reference and title of the harmonised standard (and reference document) |
First publication OJ |
Reference of superseded standard |
Date of cessation of presumption of conformity of superseded standard Note 1 |
|
(1) |
(2) |
(3) |
(4) |
(5) |
|
CEN |
EN 81-3:2000+A1:2008 Safety rules for the construction and installation of lifts - Part 3: Electric and hydraulic service lifts |
8.9.2009 |
|
|
|
EN 81-3:2000+A1:2008/AC:2009 |
|
|
|
|
|
CEN |
EN 81-31:2010 Safety rules for the construction and installation of lifts - Lifts for the transport of goods only - Part 31: Accessible goods only lifts |
20.10.2010 |
|
|
|
CEN |
EN 81-40:2008 Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 40: Stairlifts and inclined lifting platforms intended for persons with impaired mobility |
8.9.2009 |
|
|
|
CEN |
EN 81-41:2010 Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 41: Vertical lifting platforms intended for use by persons with impaired mobility |
8.4.2011 |
|
|
|
CEN |
EN 81-43:2009 Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 43: Lifts for cranes |
8.9.2009 |
|
|
|
CEN |
EN 115-1:2008+A1:2010 Safety of escalators and moving walks - Part 1: Construction and installation |
26.5.2010 |
EN 115-1:2008 Note 2.1 |
Date expired (30.9.2010) |
|
CEN |
EN 201:2009 Plastics and rubber machines - Injection moulding machines - Safety requirements |
18.12.2009 |
|
|
|
CEN |
EN 267:2009+A1:2011 Automatic forced draught burners for liquid fuels |
This is the first publication |
EN 267:2009 Note 2.1 |
29.2.2012 |
|
CEN |
EN 280:2001+A2:2009 Mobile elevating work platforms - Design calculations - Stability criteria - Construction - Safety - Examinations and tests |
18.12.2009 |
|
|
|
CEN |
EN 289:2004+A1:2008 Plastics and rubber machines - Presses - Safety requirements |
8.9.2009 |
|
|
|
CEN |
EN 349:1993+A1:2008 Safety of machinery - Minimum gaps to avoid crushing of parts of the human body |
8.9.2009 |
|
|
|
CEN |
EN 378-2:2008+A1:2009 Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation |
8.9.2009 |
|
|
|
CEN |
EN 415-1:2000+A1:2009 Packaging machines safety - Part 1: Terminology and classification of packaging machines and associated equipment |
8.9.2009 |
|
|
|
CEN |
EN 415-3:1999+A1:2009 Safety of packaging machines - Part 3: Form, fill and seal machines |
18.12.2009 |
|
|
|
CEN |
EN 415-5:2006+A1:2009 Safety of packaging machines - Part 5: Wrapping machines |
18.12.2009 |
|
|
|
CEN |
EN 415-6:2006+A1:2009 Safety of packaging machines - Part 6: Pallet wrapping machines |
18.12.2009 |
|
|
|
CEN |
EN 415-7:2006+A1:2008 Safety of packaging machines - Part 7: Group and secondary packaging machines |
8.9.2009 |
|
|
|
CEN |
EN 415-8:2008 Safety of packaging machines - Part 8: Strapping machines |
8.9.2009 |
|
|
|
CEN |
EN 415-9:2009 Safety of packaging machines - Part 9: Noise measurement methods for packaging machines, packaging lines and associated equipment, grade of accuracy 2 and 3 |
18.12.2009 |
|
|
|
CEN |
EN 422:2009 Plastics and rubber machines - Blow moulding machines - Safety requirements |
8.9.2009 |
|
|
|
CEN |
EN 453:2000+A1:2009 Food processing machinery - Dough mixers - Safety and hygiene requirements |
26.5.2010 |
|
|
|
CEN |
EN 454:2000+A1:2009 Food processing machinery - Planetary mixers - Safety and hygiene requirements |
26.5.2010 |
|
|
|
CEN |
EN 474-1:2006+A1:2009 Earth-moving machinery - Safety - Part 1: General requirements |
8.9.2009 |
|
|
|
CEN |
EN 474-2:2006+A1:2008 Earth-moving machinery - Safety - Part 2: Requirements for tractor-dozers |
8.9.2009 |
|
|
|
CEN |
EN 474-3:2006+A1:2009 Earth-moving machinery - Safety - Part 3: Requirements for loaders |
8.9.2009 |
|
|
|
CEN |
EN 474-6:2006+A1:2009 Earth-moving machinery - Safety - Part 6: Requirements for dumpers |
8.9.2009 |
|
|
|
CEN |
EN 474-7:2006+A1:2009 Earth-moving machinery - Safety - Part 7: Requirements for scrapers |
8.9.2009 |
|
|
|
CEN |
EN 474-8:2006+A1:2009 Earth-moving machinery - Safety - Part 8: Requirements for graders |
8.9.2009 |
|
|
|
CEN |
EN 474-9:2006+A1:2009 Earth-moving machinery - Safety - Part 9: Requirements for pipelayers |
8.9.2009 |
|
|
|
CEN |
EN 474-10:2006+A1:2009 Earth-moving machinery - Safety - Part 10: Requirements for trenchers |
8.9.2009 |
|
|
|
CEN |
EN 474-11:2006+A1:2008 Earth-moving machinery - Safety - Part 11: Requirements for earth and landfill compactors |
8.9.2009 |
|
|
|
CEN |
EN 474-12:2006+A1:2008 Earth-moving machinery - Safety - Part 12: Requirements for cable excavators |
8.9.2009 |
|
|
|
CEN |
EN 500-1:2006+A1:2009 Mobile road construction machinery - Safety - Part 1: Common requirements |
26.5.2010 |
|
|
|
CEN |
EN 500-2:2006+A1:2008 Mobile road construction machinery - Safety - Part 2: Specific requirements for road-milling machines |
8.9.2009 |
|
|
|
CEN |
EN 500-3:2006+A1:2008 Mobile road construction machinery - Safety - Part 3: Specific requirements for soil-stabilising machines and recycling machines |
8.9.2009 |
|
|
|
CEN |
EN 500-4:2011 Mobile road construction machinery - Safety - Part 4: Specific requirements for compaction machines |
20.7.2011 |
EN 500-4:2006+A1:2009 Note 2.1 |
Date expired (31.8.2011) |
|
CEN |
EN 500-6:2006+A1:2008 Mobile road construction machinery - Safety - Part 6: Specific requirements for paver-finishers |
8.9.2009 |
|
|
|
CEN |
EN 528:2008 Rail dependent storage and retrieval equipment - Safety requirements |
8.9.2009 |
|
|
|
CEN |
EN 547-1:1996+A1:2008 Safety of machinery - Human body measurements - Part 1: Principles for determining the dimensions required for openings for whole body access into machinery |
8.9.2009 |
|
|
|
CEN |
EN 547-2:1996+A1:2008 Safety of machinery - Human body measurements - Part 2: Principles for determining the dimensions required for access openings |
8.9.2009 |
|
|
|
CEN |
EN 547-3:1996+A1:2008 Safety of machinery - Human body measurements - Part 3: Anthropometric data |
8.9.2009 |
|
|
|
CEN |
EN 574:1996+A1:2008 Safety of machinery - Two-hand control devices - Functional aspects - Principles for design |
8.9.2009 |
|
|
|
CEN |
EN 609-1:1999+A2:2009 Agricultural and forestry machinery - Safety of log splitters - Part 1: Wedge splitters |
18.12.2009 |
|
|
|
CEN |
EN 609-2:1999+A1:2009 Agricultural and forestry machinery - Safety of log splitters - Part 2: Screw splitters |
18.12.2009 |
|
|
|
CEN |
EN 614-1:2006+A1:2009 Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles |
8.9.2009 |
|
|
|
CEN |
EN 614-2:2000+A1:2008 Safety of machinery - Ergonomic design principles - Part 2: Interactions between the design of machinery and work tasks |
8.9.2009 |
|
|
|
CEN |
EN 617:2001+A1:2010 Continuous handling equipment and systems - Safety and EMC requirements for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers |
8.4.2011 |
|
|
|
CEN |
EN 618:2002+A1:2010 Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of bulk materials except fixed belt conveyors |
8.4.2011 |
|
|
|
CEN |
EN 619:2002+A1:2010 Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of unit loads |
8.4.2011 |
|
|
|
CEN |
EN 620:2002+A1:2010 Continuous handling equipment and systems - Safety and EMC requirements for fixed belt conveyors for bulk materials |
8.4.2011 |
|
|
|
CEN |
EN 626-1:1994+A1:2008 Safety of machinery - Reduction of risks to health from hazardous substances emitted by machinery - Part 1: Principles and specifications for machinery manufacturers |
8.9.2009 |
|
|
|
CEN |
EN 626-2:1996+A1:2008 Safety of machinery - Reduction of risk to health from hazardous substances emitted by machinery - Part 2: Methodology leading to verification procedures |
8.9.2009 |
|
|
|
CEN |
EN 676:2003+A2:2008 Automatic forced draught burners for gaseous fuels |
8.9.2009 |
|
|
|
EN 676:2003+A2:2008/AC:2008 |
|
|
|
|
|
CEN |
EN 690:1994+A1:2009 Agricultural machinery - Manure spreaders - Safety |
18.12.2009 |
|
|
|
CEN |
EN 692:2005+A1:2009 Machine tools - Mechanical presses - Safety |
8.9.2009 |
|
|
|
CEN |
EN 693:2001+A2:2011 Machine tools - Safety - Hydraulic presses |
This is the first publication |
EN 693:2001+A1:2009 Note 2.1 |
31.3.2012 |
|
CEN |
EN 703:2004+A1:2009 Agricultural machinery - Silage loading, mixing and/or chopping and distributing machines - Safety |
18.12.2009 |
|
|
|
CEN |
EN 706:1996+A1:2009 Agricultural machinery - Vine shoot tipping machines - Safety |
18.12.2009 |
|
|
|
CEN |
EN 707:1999+A1:2009 Agricultural machinery - Slurry tankers - Safety |
18.12.2009 |
|
|
|
CEN |
EN 709:1997+A4:2009 Agricultural and forestry machinery - Pedestrian controlled tractors with mounted rotary cultivators, motor hoes, motor hoes with drive wheel(s) - Safety |
26.5.2010 |
EN 709:1997+A2:2009 Note 2.1 |
Date expired (31.12.2010) |
|
CEN |
EN 710:1997+A1:2010 Safety requirements for foundry moulding and coremaking machinery and plant associated equipment |
20.10.2010 |
|
|
|
CEN |
EN 741:2000+A1:2010 Continuous handling equipment and systems - Safety requirements for systems and their components for pneumatic handling of bulk materials |
8.4.2011 |
|
|
|
CEN |
EN 745:1999+A1:2009 Agricultural machinery - Rotary mowers and flail-mowers - Safety |
18.12.2009 |
|
|
|
CEN |
EN 746-1:1997+A1:2009 Industrial thermoprocessing equipment - Part 1: Common safety requirements for industrial thermoprocessing equipment |
18.12.2009 |
|
|
|
CEN |
EN 746-2:2010 Industrial thermoprocessing equipment - Part 2: Safety requirements for combustion and fuel handling systems |
20.10.2010 |
|
|
|
CEN |
EN 746-3:1997+A1:2009 Industrial thermoprocessing equipment - Part 3: Safety requirements for the generation and use of atmosphere gases |
8.9.2009 |
|
|
|
CEN |
EN 786:1996+A2:2009 Garden equipment - Electrically powered walk-behind and hand-held lawn trimmers and lawn edge trimmers - Mechanical safety |
18.12.2009 |
|
|
|
CEN |
EN 791:1995+A1:2009 Drill rigs - Safety |
8.9.2009 |
|
|
|
CEN |
EN 792-1:2000+A1:2008 Hand-held non-electric power tools - Safety requirements - Part 1: Assembly power tools for non-threaded mechanical fasteners |
8.9.2009 |
|
|
|
CEN |
EN 792-2:2000+A1:2008 Hand-held non-electric power tools - Safety requirements - Part 2: Cutting-off and crimping power tools |
8.9.2009 |
|
|
|
CEN |
EN 792-5:2000+A1:2008 Hand-held non-electric power tools - Safety requirements - Part 5: Rotary percussive drills |
8.9.2009 |
|
|
|
CEN |
EN 792-7:2001+A1:2008 Hand-held non-electric power tools - Safety requirements - Part 7: Grinders |
8.9.2009 |
|
|
|
CEN |
EN 792-8:2001+A1:2008 Hand-held non-electric power tools - Safety requirements - Part 8: Sanders and polishers |
8.9.2009 |
|
|
|
CEN |
EN 792-9:2001+A1:2008 Hand-held non-electric power tools - Safety requirements - Part 9: Die grinders |
8.9.2009 |
|
|
|
CEN |
EN 792-10:2000+A1:2008 Hand-held non-electric power tools - Safety requirements - Part 10: Compression power tools |
8.9.2009 |
|
|
|
CEN |
EN 792-11:2000+A1:2008 Hand-held non-electric power tools - Safety requirements - Part 11: Nibblers and shears |
8.9.2009 |
|
|
|
CEN |
EN 792-12:2000+A1:2008 Hand-held non-electric power tools - Safety requirements - Part 12: Small circular, small oscillating and reciprocating saws |
8.9.2009 |
|
|
|
CEN |
EN 792-13:2000+A1:2008 Hand-held non-electric power tools - Safety requirements - Part 13: Fastener driving tools |
8.9.2009 |
|
|
|
CEN |
EN 809:1998+A1:2009 Pumps and pump units for liquids - Common safety requirements |
18.12.2009 |
|
|
|
EN 809:1998+A1:2009/AC:2010 |
|
|
|
|
|
CEN |
EN 815:1996+A2:2008 Safety of unshielded tunnel boring machines and rodless shaft boring machines for rock - Safety requirements |
8.9.2009 |
|
|
|
CEN |
EN 818-1:1996+A1:2008 Short link chain for lifting purposes - Safety - Part 1: General conditions of acceptance |
8.9.2009 |
|
|
|
CEN |
EN 818-2:1996+A1:2008 Short link chain for lifting purposes - Safety - Part 2: Medium tolerance chain for chain slings - Grade 8 |
8.9.2009 |
|
|
|
CEN |
EN 818-3:1999+A1:2008 Short link chain for lifting purposes - Safety - Part 3: Medium tolerance chain for chain slings - Grade 4 |
8.9.2009 |
|
|
|
CEN |
EN 818-4:1996+A1:2008 Short link chain for lifting purposes - Safety - Part 4: Chain slings - Grade 8 |
8.9.2009 |
|
|
|
CEN |
EN 818-5:1999+A1:2008 Short link chain for lifting purposes - Safety - Part 5: Chain slings - Grade 4 |
8.9.2009 |
|
|
|
CEN |
EN 818-6:2000+A1:2008 Short link chain for lifting purposes - Safety - Part 6: Chain slings - Specification for information for use and maintenance to be provided by the manufacturer |
8.9.2009 |
|
|
|
CEN |
EN 818-7:2002+A1:2008 Short link chain for lifting purposes - Safety - Part 7: Fine tolerance hoist chain, Grade T (Types T, DAT and DT) |
8.9.2009 |
|
|
|
CEN |
EN 836:1997+A4:2011 Garden equipment - Powered lawnmowers - Safety |
This is the first publication |
|
|
|
CEN |
EN 842:1996+A1:2008 Safety of machinery - Visual danger signals - General requirements, design and testing |
8.9.2009 |
|
|
|
CEN |
EN 848-1:2007+A1:2009 Safety of woodworking machines - One side moulding machines with rotating tool - Part 1: Single spindle vertical moulding machines |
18.12.2009 |
|
|
|
CEN |
EN 848-2:2007+A1:2009 Safety of woodworking machines - One side moulding machines with rotating tool - Part 2: Single spindle hand fed/integrated fed routing machines |
18.12.2009 |
|
|
|
CEN |
EN 848-3:2007+A2:2009 Safety of woodworking machines - One side moulding machines with rotating tools - Part 3: Numerically controlled (NC) boring and routing machines |
18.12.2009 |
|
|
|
CEN |
EN 859:2007+A1:2009 Safety of woodworking machines - Hand fed surface planing machines |
26.5.2010 |
|
|
|
CEN |
EN 860:2007+A1:2009 Safety of woodworking machines - One side thickness planing machines |
18.12.2009 |
|
|
|
CEN |
EN 861:2007+A1:2009 Safety of woodworking machines - Surface planing and thicknessing machines |
18.12.2009 |
|
|
|
CEN |
EN 869:2006+A1:2009 Safety of machinery - Safety requirements for pressure metal diecasting units |
8.9.2009 |
|
|
|
CEN |
EN 894-1:1997+A1:2008 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 1: General principles for human interactions with displays and control actuators |
8.9.2009 |
|
|
|
CEN |
EN 894-2:1997+A1:2008 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 2: Displays |
8.9.2009 |
|
|
|
CEN |
EN 894-3:2000+A1:2008 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 3: Control actuators |
8.9.2009 |
|
|
|
CEN |
EN 894-4:2010 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 4: Location and arrangement of displays and control actuators |
20.10.2010 |
|
|
|
CEN |
EN 908:1999+A1:2009 Agricultural and forestry machinery - Reel machines for irrigation - Safety |
18.12.2009 |
|
|
|
CEN |
EN 909:1998+A1:2009 Agricultural and forestry machinery - Centre pivot and moving lateral types irrigation machines - Safety |
18.12.2009 |
|
|
|
CEN |
EN 930:1997+A2:2009 Footwear, leather and imitation leather goods manufacturing machines - Roughing, scouring, polishing and trimming machines - Safety requirements |
18.12.2009 |
|
|
|
CEN |
EN 931:1997+A2:2009 Footwear manufacturing machines - Lasting machines - Safety requirements |
18.12.2009 |
|
|
|
CEN |
EN 940:2009 Safety of woodworking machines - Combined woodworking machines |
18.12.2009 |
|
|
|
CEN |
EN 953:1997+A1:2009 Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards |
8.9.2009 |
|
|
|
CEN |
EN 972:1998+A1:2010 Tannery machines - Reciprocating roller machines - Safety requirements |
8.4.2011 |
|
|
|
EN 972:1998+A1:2010/AC:2011 |
|
|
|
|
|
CEN |
EN 981:1996+A1:2008 Safety of machinery - System of auditory and visual danger and information signals |
8.9.2009 |
|
|
|
CEN |
EN 996:1995+A3:2009 Piling equipment - Safety requirements |
8.9.2009 |
|
|
|
CEN |
EN 1005-1:2001+A1:2008 Safety of machinery - Human physical performance - Part 1: Terms and definitions |
8.9.2009 |
|
|
|
CEN |
EN 1005-2:2003+A1:2008 Safety of machinery - Human physical performance - Part 2: Manual handling of machinery and component parts of machinery |
8.9.2009 |
|
|
|
CEN |
EN 1005-3:2002+A1:2008 Safety of machinery - Human physical performance - Part 3: Recommended force limits for machinery operation |
8.9.2009 |
|
|
|
CEN |
EN 1005-4:2005+A1:2008 Safety of machinery - Human physical performance - Part 4: Evaluation of working postures and movements in relation to machinery |
8.9.2009 |
|
|
|
CEN |
EN 1010-1:2004+A1:2010 Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 1: Common requirements |
8.4.2011 |
|
|
|
CEN |
EN 1010-2:2006+A1:2010 Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 2: Printing and varnishing machines including pre-press machinery |
8.4.2011 |
|
|
|
CEN |
EN 1010-3:2002+A1:2009 Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 3: Cutting machines |
18.12.2009 |
|
|
|
CEN |
EN 1010-4:2004+A1:2009 Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 4: Bookbinding, paper converting and finishing machines |
18.12.2009 |
|
|
|
CEN |
EN 1012-1:2010 Compressors and vacuum pumps - Safety requirements - Part 1: Air compressors |
8.4.2011 |
|
|
|
CEN |
EN 1012-2:1996+A1:2009 Compressors and vacuum pumps - Safety requirements - Part 2: Vacuum pumps |
18.12.2009 |
|
|
|
CEN |
EN 1028-1:2002+A1:2008 Fire-fighting pumps - Fire-fighting centrifugal pumps with primer - Part 1: Classification - General and safety requirements |
8.9.2009 |
|
|
|
CEN |
EN 1028-2:2002+A1:2008 Fire-fighting pumps - Fire-fighting centrifugal pumps with primer - Part 2: Verification of general and safety requirements |
8.9.2009 |
|
|
|
CEN |
EN 1032:2003+A1:2008 Mechanical vibration - Testing of mobile machinery in order to determine the vibration emission value |
8.9.2009 |
|
|
|
CEN |
EN 1034-1:2000+A1:2010 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 1: Common requirements |
26.5.2010 |
|
|
|
CEN |
EN 1034-2:2005+A1:2009 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 2: Barking drums |
26.5.2010 |
|
|
|
CEN |
EN 1034-3:1999+A1:2009 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 3: Winders and slitters, plying machines |
26.5.2010 |
|
|
|
CEN |
EN 1034-4:2005+A1:2009 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 4: Pulpers and their loading facilities |
26.5.2010 |
|
|
|
CEN |
EN 1034-5:2005+A1:2009 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 5: Sheeters |
26.5.2010 |
|
|
|
CEN |
EN 1034-6:2005+A1:2009 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 6: Calender |
26.5.2010 |
|
|
|
CEN |
EN 1034-7:2005+A1:2009 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 7: Chests |
26.5.2010 |
|
|
|
CEN |
EN 1034-13:2005+A1:2009 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 13: Machines for de-wiring bales and units |
26.5.2010 |
|
|
|
CEN |
EN 1034-14:2005+A1:2009 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 14: Reel splitter |
26.5.2010 |
|
|
|
CEN |
EN 1034-22:2005+A1:2009 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 22: Wood Grinders |
26.5.2010 |
|
|
|
CEN |
EN 1037:1995+A1:2008 Safety of machinery - Prevention of unexpected start-up |
8.9.2009 |
|
|
|
CEN |
EN 1088:1995+A2:2008 Safety of machinery - Interlocking devices associated with guards - Principles for design and selection |
8.9.2009 |
|
|
|
CEN |
EN 1093-1:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 1: Selection of test methods |
8.9.2009 |
|
|
|
CEN |
EN 1093-2:2006+A1:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 2: Tracer gas method for the measurement of the emission rate of a given pollutant |
8.9.2009 |
|
|
|
CEN |
EN 1093-3:2006+A1:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 3: Test bench method for the measurement of the emission rate of a given pollutant |
8.9.2009 |
|
|
|
CEN |
EN 1093-4:1996+A1:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 4: Capture efficiency of an exhaust system - Tracer method |
8.9.2009 |
|
|
|
CEN |
EN 1093-6:1998+A1:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 6: Separation efficiency by mass, unducted outlet |
8.9.2009 |
|
|
|
CEN |
EN 1093-7:1998+A1:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 7: Separation efficiency by mass, ducted outlet |
8.9.2009 |
|
|
|
CEN |
EN 1093-8:1998+A1:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 8: Pollutant concentration parameter, test bench method |
8.9.2009 |
|
|
|
CEN |
EN 1093-9:1998+A1:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 9: Pollutant concentration parameter, room method |
8.9.2009 |
|
|
|
CEN |
EN 1093-11:2001+A1:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 11: Decontamination index |
8.9.2009 |
|
|
|
CEN |
EN 1114-3:2001+A1:2008 Plastics and rubber machines - Extruders and extrusion lines - Part 3: Safety requirements for haul-offs |
8.9.2009 |
|
|
|
CEN |
EN 1127-1:2011 Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology |
This is the first publication |
EN 1127-1:2007 Note 2.1 |
31.7.2014 |
|
CEN |
EN 1127-2:2002+A1:2008 Explosive atmospheres - Explosion prevention and protection - Part 2: Basic concepts and methodology for mining |
8.9.2009 |
|
|
|
CEN |
EN 1175-1:1998+A1:2010 Safety of industrial trucks - Electrical requirements - Part 1: General requirements for battery powered trucks |
8.4.2011 |
|
|
|
CEN |
EN 1175-2:1998+A1:2010 Safety of industrial trucks - Electrical requirements - Part 2: General requirements of internal combustion engine powered trucks |
8.4.2011 |
|
|
|
CEN |
EN 1175-3:1998+A1:2010 Safety of industrial trucks - Electrical requirements - Part 3: Specific requirements for the electric power transmission systems of internal combustion engine powered trucks |
8.4.2011 |
|
|
|
CEN |
EN 1218-1:1999+A1:2009 Safety of woodworking machines - Tenoning machines - Part 1: Single end tenoning machines with sliding table |
18.12.2009 |
|
|
|
CEN |
EN 1218-2:2004+A1:2009 Safety of woodworking machines - Tenoning machines - Part 2: Double end tenoning and/or profiling machines fed by chain or chains |
8.9.2009 |
|
|
|
CEN |
EN 1218-3:2001+A1:2009 Safety of woodworking machines - Tenoning machines - Part 3: Hand fed tenoning machines with sliding table for cutting structural timbers |
8.9.2009 |
|
|
|
CEN |
EN 1218-4:2004+A2:2009 Safety of woodworking machines - Tenoning machines - Part 4: Edge banding machines fed by chain(s) |
8.9.2009 |
|
|
|
CEN |
EN 1218-5:2004+A1:2009 Safety of woodworking machines - Tenoning machines - Part 5: One side profiling machines with fixed table and feed rollers or feed chain |
18.12.2009 |
|
|
|
CEN |
EN 1247:2004+A1:2010 Foundry machinery - Safety requirements for ladles, pouring equipment, centrifugal casting machines, continuous and semi continuous casting machines |
8.4.2011 |
|
|
|
CEN |
EN 1248:2001+A1:2009 Foundry machinery - Safety requirements for abrasive blasting equipment |
8.9.2009 |
|
|
|
CEN |
EN 1265:1999+A1:2008 Safety of machinery - Noise test code for foundry machines and equipment |
8.9.2009 |
|
|
|
CEN |
EN 1299:1997+A1:2008 Mechanical vibration and shock - Vibration isolation of machines - Information for the application of source isolation |
8.9.2009 |
|
|
|
CEN |
EN 1374:2000+A1:2010 Agricultural machinery - Silos stationary unloaders for round silos - Safety |
20.10.2010 |
|
|
|
CEN |
EN 1398:2009 Dock levellers - Safety requirements |
8.9.2009 |
|
|
|
CEN |
EN 1417:1996+A1:2008 Plastics and rubber machines - Two roll mills - Safety requirements |
8.9.2009 |
|
|
|
EN 1417:1996+A1:2008/AC:2009 |
|
|
|
|
|
CEN |
EN 1492-1:2000+A1:2008 Textile slings - Safety - Part 1: Flat woven webbing slings made of man-made fibres for general purpose use |
8.9.2009 |
|
|
|
CEN |
EN 1492-2:2000+A1:2008 Textile slings - Safety - Part 2: Roundslings made of man-made fibres for general purpose use |
8.9.2009 |
|
|
|
CEN |
EN 1492-4:2004+A1:2008 Textile slings - Safety - Part 4: Lifting slings for general service made from natural and man-made fibre ropes |
8.9.2009 |
|
|
|
CEN |
EN 1493:2010 Vehicle lifts |
8.4.2011 |
EN 1493:1998+A1:2008 Note 2.1 |
Date expired (4.8.2011) |
|
CEN |
EN 1494:2000+A1:2008 Mobile or movable jacks and associated lifting equipment |
8.9.2009 |
|
|
|
CEN |
EN 1495:1997+A2:2009 Lifting platforms - Mast climbing work platforms |
18.12.2009 |
|
|
|
EN 1495:1997+A2:2009/AC:2010 |
|
|
|
|
|
Warning: This publication does not concern paragraph 5.3.2.4, the last subparagraph of 7.1.2.12, table 8 and figure 9 of standard EN 1495:1997, in respect of which it grants no presumption of conformity to the provisions of Directive 2006/42/EC. |
||||
|
CEN |
EN 1501-1:2011 Refuse collection vehicles - General requirements and safety requirements - Part 1: Rear loaded refuse collection vehicles |
This is the first publication |
EN 1501-1:1998+A2:2009 Note 2.1 |
29.2.2012 |
|
CEN |
EN 1501-2:2005+A1:2009 Refuse collection vehicles and associated lifting devices - General requirements and safety requirements - Part 2: Side loaded refuse collection vehicles |
29.12.2009 |
|
|
|
CEN |
EN 1501-3:2008 Refuse collection vehicles and their associated lifting devices - General requirements and safety requirements - Part 3: Front loaded refuse collection vehicles |
8.9.2009 |
|
|
|
CEN |
EN 1501-4:2007 Refuse collection vehicles and their associated lifting devices - General requirements and safety requirements - Part 4: Noise test code for refuse collection vehicles |
8.9.2009 |
|
|
|
CEN |
EN 1501-5:2011 Refuse collection vehicles - General requirements and safety requirements - Part 5: Lifting devices for refuse collection vehicles |
This is the first publication |
EN 1501-1:1998+A2:2009 Note 2.1 |
29.2.2012 |
|
CEN |
EN 1526:1997+A1:2008 Safety of industrial trucks - Additional requirements for automated functions on trucks |
8.9.2009 |
|
|
|
CEN |
EN 1539:2009 Dryers and ovens, in which flammable substances are released - Safety requirements |
26.5.2010 |
|
|
|
CEN |
EN 1547:2001+A1:2009 Industrial thermoprocessing equipment - Noise test code for industrial thermoprocessing equipment including its ancillary handling equipment |
8.9.2009 |
|
|
|
CEN |
EN 1550:1997+A1:2008 Machine-tools safety - Safety requirements for the design and construction of work holding chucks |
8.9.2009 |
|
|
|
CEN |
EN 1570:1998+A2:2009 Safety requirements for lifting tables |
18.12.2009 |
|
|
|
CEN |
EN 1612-1:1997+A1:2008 Plastics and rubber machines - Reaction moulding machines - Part 1: Safety requirements for metering and mixing units |
8.9.2009 |
|
|
|
CEN |
EN 1672-2:2005+A1:2009 Food processing machinery - Basic concepts - Part 2: Hygiene requirements |
8.9.2009 |
|
|
|
CEN |
EN 1673:2000+A1:2009 Food processing machinery - Rotary rack ovens - Safety and hygiene requirements |
26.5.2010 |
|
|
|
CEN |
EN 1674:2000+A1:2009 Food processing machinery - Dough and pastry brakes - Safety and hygiene requirements |
26.5.2010 |
|
|
|
CEN |
EN 1677-1:2000+A1:2008 Components for slings - Safety - Part 1: Forged steel components, Grade 8 |
8.9.2009 |
|
|
|
CEN |
EN 1677-2:2000+A1:2008 Components for slings - Safety - Part 2: Forged steel lifting hooks with latch, Grade 8 |
8.9.2009 |
|
|
|
CEN |
EN 1677-3:2001+A1:2008 Components for slings - Safety - Part 3: Forged steel self-locking hooks - Grade 8 |
8.9.2009 |
|
|
|
CEN |
EN 1677-4:2000+A1:2008 Components for slings - Safety - Part 4: Links, Grade 8 |
8.9.2009 |
|
|
|
CEN |
EN 1677-5:2001+A1:2008 Components for slings - Safety - Part 5: Forged steel lifting hooks with latch - Grade 4 |
8.9.2009 |
|
|
|
CEN |
EN 1677-6:2001+A1:2008 Components for slings - Safety - Part 6: Links - Grade 4 |
8.9.2009 |
|
|
|
CEN |
EN 1678:1998+A1:2010 Food processing machinery - Vegetable cutting machines - Safety and hygiene requirements |
20.10.2010 |
|
|
|
CEN |
EN 1679-1:1998+A1:2011 Reciprocating internal combustion engines - Safety - Part 1: Compression ignition engines |
20.7.2011 |
|
|
|
CEN |
EN 1710:2005+A1:2008 Equipment and components intended for use in potentially explosive atmospheres in underground mines |
8.9.2009 |
|
|
|
EN 1710:2005+A1:2008/AC:2010 |
|
|
|
|
|
CEN |
EN 1755:2000+A1:2009 Safety of industrial trucks - Operation in potentially explosive atmospheres - Use in flammable gas, vapour, mist and dust |
8.9.2009 |
|
|
|
CEN |
EN 1756-1:2001+A1:2008 Tail lifts - Platform lifts for mounting on wheeled vehicles - Safety requirements - Part 1: Tail lifts for goods |
8.9.2009 |
|
|
|
CEN |
EN 1756-2:2004+A1:2009 Tail lifts - Platform lifts for mounting on wheeled vehicles - Safety requirements - Part 2: Tail lifts for passengers |
18.12.2009 |
|
|
|
CEN |
EN 1760-1:1997+A1:2009 Safety of machinery - Pressure sensitive protective devices - Part 1: General principles for the design and testing of pressure sensitive mats and pressure sensitive floors |
8.9.2009 |
|
|
|
CEN |
EN 1760-2:2001+A1:2009 Safety of machinery - Pressure sensitive protective devices - Part 2: General principles for the design and testing of pressure sensitive edges and pressure sensitive bars |
8.9.2009 |
|
|
|
CEN |
EN 1760-3:2004+A1:2009 Safety of machinery - Pressure sensitive protective devices - Part 3: General principles for the design and testing of pressure sensitive bumpers, plates, wires and similar devices |
8.9.2009 |
|
|
|
CEN |
EN 1777:2010 Hydraulic platforms (HPs) for fire fighting and rescue services - Safety requirements and testing |
26.5.2010 |
EN 1777:2004+A1:2009 Note 2.1 |
Date expired (30.9.2010) |
|
CEN |
EN 1804-1:2001+A1:2010 Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 1: Support units and general requirements |
26.5.2010 |
|
|
|
CEN |
EN 1804-2:2001+A1:2010 Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 2: Power set legs and rams |
26.5.2010 |
|
|
|
CEN |
EN 1804-3:2006+A1:2010 Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 3: Hydraulic control systems |
26.5.2010 |
|
|
|
CEN |
EN 1807:1999+A1:2009 Safety of woodworking machines - Band sawing machines |
18.12.2009 |
|
|
|
CEN |
EN 1808:1999+A1:2010 Safety requirements on Suspended Access Equipment - Design calculations, stability criteria, construction - Tests |
20.10.2010 |
|
|
|
CEN |
EN 1829-1:2010 High pressure water jet machines - Safety requirements - Part 1: Machines |
26.5.2010 |
|
|
|
CEN |
EN 1829-2:2008 High-pressure water jet machines - Safety requirements - Part 2: Hoses, hose lines and connectors |
8.9.2009 |
|
|
|
EN 1829-2:2008/AC:2011 |
|
|
|
|
|
CEN |
EN 1837:1999+A1:2009 Safety of machinery - Integral lighting of machines |
18.12.2009 |
|
|
|
CEN |
EN 1845:2007 Footwear manufacturing machines - Footwear moulding machines - Safety requirements |
8.9.2009 |
|
|
|
CEN |
EN 1846-2:2009 Firefighting and rescue service vehicles - Part 2: Common requirements - Safety and performance |
18.12.2009 |
EN 1846-2:2001+A3:2009 Note 2.1 |
Date expired (28.2.2011) |
|
CEN |
EN 1846-3:2002+A1:2008 Firefighting and rescue service vehicles - Part 3: Permanently installed equipment - Safety and performance |
8.9.2009 |
|
|
|
CEN |
EN 1853:1999+A1:2009 Agricultural machinery - Trailers with tipping body - Safety |
18.12.2009 |
|
|
|
CEN |
EN 1870-1:2007+A1:2009 Safety of woodworking machines - Circular sawing machines - Part 1: Circular saw benches (with and without sliding table), dimension saws and building site saws |
8.9.2009 |
|
|
|
CEN |
EN 1870-3:2001+A1:2009 Safety of woodworking machines - Circular sawing machines - Part 3: Down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches |
8.9.2009 |
|
|
|
CEN |
EN 1870-4:2001+A1:2009 Safety of woodworking machines - Circular sawing machines - Part 4: Multiblade rip sawing machines with manual loading and/or unloading |
18.12.2009 |
|
|
|
CEN |
EN 1870-5:2002+A1:2009 Safety of woodworking machines - Circular sawing machines - Part 5: Circular sawbenches/up-cutting cross-cut sawing machines |
18.12.2009 |
|
|
|
CEN |
EN 1870-6:2002+A1:2009 Safety of woodworking machines - Circular sawing machines - Part 6: Circular sawing machines for firewood and dual purpose circular sawing machines for firewood/circular saw benches, with manual loading and/or unloading |
18.12.2009 |
|
|
|
CEN |
EN 1870-7:2002+A1:2009 Safety of woodworking machines - Circular sawing machines - Part 7: Single blade log sawing machines with integrated feed table and manual loading and/or unloading |
18.12.2009 |
|
|
|
CEN |
EN 1870-8:2001+A1:2009 Safety of woodworking machines - Circular sawing machines - Part 8: Single blade edging circular rip sawing machines with power driven saw unit and manual loading and/or unloading |
18.12.2009 |
|
|
|
CEN |
EN 1870-9:2000+A1:2009 Safety of woodworking machines - Circular sawing machines - Part 9: Double blade circular sawing machines for cross-cutting with integrated feed and with manual loading and/or unloading |
18.12.2009 |
|
|
|
CEN |
EN 1870-10:2003+A1:2009 Safety of woodworking machines - Circular sawing machines - Part 10: Single blade automatic and semi-automatic up-cutting cross-cut sawing machines |
18.12.2009 |
|
|
|
CEN |
EN 1870-11:2003+A1:2009 Safety of woodworking machines - Circular sawing machines - Part 11: Semi-automatic and automatic horizontal cross-cut sawing machines with one saw unit (radial arm saws) |
18.12.2009 |
|
|
|
CEN |
EN 1870-12:2003+A1:2009 Safety of woodworking machines - Circular sawing machines - Part 12: Pendulum cross-cut sawing machines |
18.12.2009 |
|
|
|
CEN |
EN 1870-13:2007+A1:2009 Safety of woodworking machines - Circular sawing machines - Part 13: Horizontal beam panel sawing machines |
18.12.2009 |
|
|
|
CEN |
EN 1870-14:2007+A1:2009 Safety of woodworking machines - Circular sawing machines - Part 14: Vertical panel sawing machines |
18.12.2009 |
|
|
|
CEN |
EN 1870-15:2004+A1:2009 Safety of woodworking machines - Circular sawing machines - Part 15: Multiblade cross-cut sawing machines with integrated feed of the workpiece and manual loading and/or unloading |
18.12.2009 |
|
|
|
CEN |
EN 1870-16:2005+A1:2009 Safety of woodworking machines - Circular sawing machines - Part 16: Double mitre sawing machines for V-cutting |
18.12.2009 |
|
|
|
CEN |
EN 1870-17:2007+A2:2009 Safety of woodworking machines - Circular sawing machines - Part 17: Manual horizontal cutting cross-cut sawing machines with one saw unit (manual radial arm saws) |
18.12.2009 |
|
|
|
CEN |
EN 1889-1:2011 Machines for underground mines - Mobile machines working underground - Safety - Part 1: Rubber tyred vehicles |
This is the first publication |
|
|
|
CEN |
EN 1889-2:2003+A1:2009 Machines for underground mines - Mobile machines working underground - Safety - Part 2: Rail locomotives |
8.9.2009 |
|
|
|
CEN |
EN 1915-1:2001+A1:2009 Aircraft ground support equipment - General requirements - Part 1: Basic safety requirements |
8.9.2009 |
|
|
|
CEN |
EN 1915-2:2001+A1:2009 Aircraft ground support equipment - General requirements - Part 2: Stability and strength requirements, calculations and test methods |
8.9.2009 |
|
|
|
CEN |
EN 1915-3:2004+A1:2009 Aircraft ground support equipment - General requirements - Part 3: Vibration measurement methods and reduction |
8.9.2009 |
|
|
|
CEN |
EN 1915-4:2004+A1:2009 Aircraft ground support equipment - General requirements - Part 4: Noise measurement methods and reduction |
8.9.2009 |
|
|
|
CEN |
EN 1953:1998+A1:2009 Atomising and spraying equipment for coating materials - Safety requirements |
18.12.2009 |
|
|
|
CEN |
EN 1974:1998+A1:2009 Food processing machinery - Slicing machines - Safety and hygiene requirements |
18.12.2009 |
|
|
|
CEN |
EN ISO 2151:2008 Acoustics - Noise test code for compressors and vacuum pumps - Engineering method (Grade 2) (ISO 2151:2004) |
8.9.2009 |
|
|
|
CEN |
EN ISO 2860:2008 Earth-moving machinery - Minimum access dimensions (ISO 2860:1992) |
8.9.2009 |
|
|
|
CEN |
EN ISO 2867:2011 Earth-moving machinery - Access systems (ISO 2867:2011) |
This is the first publication |
EN ISO 2867:2008 Note 2.1 |
31.7.2014 |
|
CEN |
EN ISO 3164:2008 Earth-moving machinery - Laboratory evaluations of protective structures - Specifications for deflection-limiting volume (ISO 3164:1995) |
8.9.2009 |
|
|
|
CEN |
EN ISO 3266:2010 Forged steel eyebolts grade 4 for general lifting purposes (ISO 3266:2010) |
20.10.2010 |
|
|
|
CEN |
EN ISO 3411:2007 Earth-moving machinery - Physical dimensions of operators and minimum operator space envelope (ISO 3411:2007) |
8.9.2009 |
|
|
|
CEN |
EN ISO 3449:2008 Earth-moving machinery - Falling-object protective structures - Laboratory tests and performance requirements (ISO 3449:2005) |
8.9.2009 |
|
|
|
CEN |
EN ISO 3450:2008 Earth-moving machinery - Braking systems of rubber-tyred machines - Systems and performance requirements and test procedures (ISO 3450:1996) |
8.9.2009 |
|
|
|
CEN |
EN ISO 3457:2008 Earth-moving machinery - Guards - Definitions and requirements (ISO 3457:2003) |
8.9.2009 |
|
|
|
CEN |
EN ISO 3471:2008 Earth-moving machinery - Roll-over protective structures - Laboratory tests and performance requirements (ISO 3471:2008) |
8.9.2009 |
|
|
|
CEN |
EN ISO 3741:2010 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for reverberation test rooms (ISO 3741:2010) |
8.4.2011 |
EN ISO 3741:2009 Note 2.1 |
Date expired (30.4.2011) |
|
CEN |
EN ISO 3743-1:2010 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for small movable sources in reverberant fields - Part 1: Comparison method for a hard-walled test room (ISO 3743-1:2010) |
8.4.2011 |
EN ISO 3743-1:2009 Note 2.1 |
Date expired (30.4.2011) |
|
CEN |
EN ISO 3743-2:2009 Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering methods for small, movable sources in reverberant fields - Part 2: Methods for special reverberation test rooms (ISO 3743-2:1994) |
18.12.2009 |
|
|
|
CEN |
EN ISO 3744:2010 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010) |
8.4.2011 |
EN ISO 3744:2009 Note 2.1 |
Date expired (30.4.2011) |
|
CEN |
EN ISO 3745:2009 Acoustics - Determination of sound power levels of noise sources using sound pressure - Precision methods for anechoic and semi-anechoic rooms (ISO 3745:2003) |
18.12.2009 |
|
|
|
CEN |
EN ISO 3746:2010 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:2010) |
8.4.2011 |
EN ISO 3746:2009 Note 2.1 |
Date expired (30.6.2011) |
|
CEN |
EN ISO 3747:2010 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering/survey methods for use in situ in a reverberant environment (ISO 3747:2010) |
8.4.2011 |
EN ISO 3747:2009 Note 2.1 |
Date expired (30.6.2011) |
|
CEN |
EN ISO 4254-1:2009 Agricultural machinery - Safety - Part 1: General requirements (ISO 4254-1:2008) |
18.12.2009 |
|
|
|
EN ISO 4254-1:2009/AC:2010 |
|
|
|
|
|
CEN |
EN ISO 4254-5:2009 Agricultural machinery - Safety - Part 5: Power-driven soil-working machines (ISO 4254-5:2008) |
26.5.2010 |
|
|
|
EN ISO 4254-5:2009/AC:2011 |
|
|
|
|
|
CEN |
EN ISO 4254-6:2009 Agricultural machinery - Safety - Part 6: Sprayers and liquid fertilizer distributors (ISO 4254-6:2009) |
26.5.2010 |
|
|
|
EN ISO 4254-6:2009/AC:2010 |
|
|
|
|
|
CEN |
EN ISO 4254-7:2009 Agricultural machinery - Safety - Part 7: Combine harvesters, forage harvesters and cotton harvesters (ISO 4254-7:2008) |
26.5.2010 |
|
|
|
EN ISO 4254-7:2009/AC:2010 |
|
|
|
|
|
CEN |
EN ISO 4254-10:2009 Agricultural machinery - Safety - Part 10: Rotary tedders and rakes (ISO 4254-10:2009) |
26.5.2010 |
|
|
|
EN ISO 4254-10:2009/AC:2010 |
|
|
|
|
|
CEN |
EN ISO 4254-11:2010 Agricultural machinery - Safety - Part 11: Pick-up balers (ISO 4254-11:2010) |
8.4.2011 |
EN 704:1999+A1:2009 Note 2.1 |
Date expired (30.6.2011) |
|
CEN |
EN ISO 4413:2010 Hydraulic fluid power - General rules and safety requirements for systems and their components (ISO 4413:2010) |
8.4.2011 |
EN 982:1996+A1:2008 Note 2.1 |
30.11.2011 |
|
CEN |
EN ISO 4414:2010 Pneumatic fluid power - General rules and safety requirements for systems and their components (ISO 4414:2010) |
8.4.2011 |
EN 983:1996+A1:2008 Note 2.1 |
30.11.2011 |
|
CEN |
EN ISO 4871:2009 Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996) |
18.12.2009 |
|
|
|
CEN |
EN ISO 5136:2009 Acoustics - Determination of sound power radiated into a duct by fans and other air-moving devices - In-duct method (ISO 5136:2003) |
18.12.2009 |
|
|
|
CEN |
EN ISO 5674:2009 Tractors and machinery for agriculture and forestry - Guards for power take-off (PTO) drive-shafts - Strength and wear tests and acceptance criteria (ISO 5674:2004, corrected version 2005-07-01) |
8.9.2009 |
|
|
|
CEN |
EN ISO 6682:2008 Earth-moving machinery - Zones of comfort and reach for controls (ISO 6682:1986, including Amd 1:1989) |
8.9.2009 |
|
|
|
CEN |
EN ISO 6683:2008 Earth-moving machinery - Seat belts and seat belt anchorages - Performance requirements and tests (ISO 6683:2005) |
8.9.2009 |
|
|
|
CEN |
EN ISO 7096:2008 Earth-moving machinery - Laboratory evaluation of operator seat vibration (ISO 7096:2000) |
8.9.2009 |
|
|
|
EN ISO 7096:2008/AC:2009 |
|
|
|
|
|
CEN |
EN ISO 7235:2009 Acoustics - Laboratory measurement procedures for ducted silencers and air-terminal units - Insertion loss, flow noise and total pressure loss (ISO 7235:2003) |
18.12.2009 |
|
|
|
CEN |
EN ISO 7731:2008 Ergonomics - Danger signals for public and work areas - Auditory danger signals (ISO 7731:2003) |
8.9.2009 |
|
|
|
CEN |
EN ISO 8230-1:2008 Safety requirements for dry-cleaning machines - Part 1: Common safety requirements (ISO 8230-1:2008) |
8.9.2009 |
|
|
|
CEN |
EN ISO 8230-2:2008 Safety requirements for dry-cleaning machines - Part 2: Machines using perchloroethylene (ISO 8230-2:2008) |
8.9.2009 |
|
|
|
CEN |
EN ISO 8230-3:2008 Safety requirements for dry-cleaning machines - Part 3: Machines using combustible solvents (ISO 8230-3:2008) |
8.9.2009 |
|
|
|
CEN |
EN ISO 9614-1:2009 Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 1: Measurement at discrete points (ISO 9614-1:1993) |
18.12.2009 |
|
|
|
CEN |
EN ISO 9614-3:2009 Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 3: Precision method for measurement by scanning (ISO 9614-3:2002) |
18.12.2009 |
|
|
|
CEN |
EN ISO 9902-1:2001 Textile machinery - Noise test code - Part 1: Common requirements (ISO 9902-1:2001) |
18.12.2009 |
|
|
|
EN ISO 9902-1:2001/A1:2009 |
18.12.2009 |
Note 3 |
Date expired (28.12.2009) |
|
|
CEN |
EN ISO 9902-2:2001 Textile machinery - Noise test code - Part 2: Spinning preparatory and spinning machinery (ISO 9902-2:2001) |
18.12.2009 |
|
|
|
EN ISO 9902-2:2001/A1:2009 |
18.12.2009 |
Note 3 |
Date expired (28.12.2009) |
|
|
CEN |
EN ISO 9902-3:2001 Textile machinery - Noise test code - Part 3: Nonwoven machinery (ISO 9902-3:2001) |
18.12.2009 |
|
|
|
EN ISO 9902-3:2001/A1:2009 |
18.12.2009 |
Note 3 |
Date expired (28.12.2009) |
|
|
CEN |
EN ISO 9902-4:2001 Textile machinery - Noise test code - Part 4: Yarn processing, cordage and rope manufacturing machinery (ISO 9902-4:2001) |
18.12.2009 |
|
|
|
EN ISO 9902-4:2001/A1:2009 |
18.12.2009 |
Note 3 |
Date expired (28.12.2009) |
|
|
CEN |
EN ISO 9902-5:2001 Textile machinery - Noise test code - Part 5: Weaving and knitting preparatory machinery (ISO 9902-5:2001) |
18.12.2009 |
|
|
|
EN ISO 9902-5:2001/A1:2009 |
18.12.2009 |
Note 3 |
Date expired (28.12.2009) |
|
|
CEN |
EN ISO 9902-6:2001 Textile machinery - Noise test code - Part 6: Fabric manufacturing machinery (ISO 9902-6:2001) |
18.12.2009 |
|
|
|
EN ISO 9902-6:2001/A1:2009 |
18.12.2009 |
Note 3 |
Date expired (28.12.2009) |
|
|
CEN |
EN ISO 9902-7:2001 Textile machinery - Noise test code - Part 7: Dyeing and finishing machinery (ISO 9902-7:2001) |
18.12.2009 |
|
|
|
EN ISO 9902-7:2001/A1:2009 |
18.12.2009 |
Note 3 |
Date expired (28.12.2009) |
|
|
CEN |
EN ISO 10218-1:2011 Robots and robotic devices - Safety requirements for industrial robots - Part 1: Robots (ISO 10218-1:2011) |
This is the first publication |
EN ISO 10218-1:2008 Note 2.1 |
31.1.2012 |
|
CEN |
EN ISO 10218-2:2011 Robots and robotic devices - Safety requirements for industrial robots - Part 2: Robot systems and integration (ISO 10218-2:2011) |
This is the first publication |
|
|
|
CEN |
EN ISO 10472-1:2008 Safety requirements for industrial laundry machinery - Part 1: Common requirements (ISO 10472-1:1997) |
8.9.2009 |
|
|
|
CEN |
EN ISO 10472-2:2008 Safety requirements for industrial laundry machinery - Part 2: Washing machines and washer-extractors (ISO 10472-2:1997) |
8.9.2009 |
|
|
|
CEN |
EN ISO 10472-3:2008 Safety requirements for industrial laundry machinery - Part 3: Washing tunnel lines including component machines (ISO 10472-3:1997) |
8.9.2009 |
|
|
|
CEN |
EN ISO 10472-4:2008 Safety requirements for industrial laundry machinery - Part 4: Air dryers (ISO 10472-4:1997) |
8.9.2009 |
|
|
|
CEN |
EN ISO 10472-5:2008 Safety requirements for industrial laundry machinery - Part 5: Flatwork ironers, feeders and folders (ISO 10472-5:1997) |
8.9.2009 |
|
|
|
CEN |
EN ISO 10472-6:2008 Safety requirements for industrial laundry machinery - Part 6: Ironing and fusing presses (ISO 10472-6:1997) |
8.9.2009 |
|
|
|
CEN |
EN ISO 10517:2009 Powered hand-held hedge trimmers - Safety (ISO 10517:2009) |
18.12.2009 |
|
|
|
CEN |
EN ISO 10821:2005 Industrial sewing machines - Safety requirements for sewing machines, units and systems (ISO 10821:2005) |
18.12.2009 |
|
|
|
EN ISO 10821:2005/A1:2009 |
18.12.2009 |
Note 3 |
Date expired (28.12.2009) |
|
|
CEN |
EN ISO 11102-1:2009 Reciprocating internal combustion engines - Handle starting equipment - Part 1: Safety requirements and tests (ISO 11102-1:1997) |
18.12.2009 |
|
|
|
CEN |
EN ISO 11102-2:2009 Reciprocating internal combustion engines - Handle starting equipment - Part 2: Method of testing the angle of disengagement (ISO 11102-2:1997) |
8.9.2009 |
|
|
|
CEN |
EN ISO 11111-1:2009 Textile machinery - Safety requirements - Part 1: Common requirements (ISO 11111-1:2009) |
18.12.2009 |
|
|
|
CEN |
EN ISO 11111-2:2005 Textile machinery - Safety requirements - Part 2: Spinning preparatory and spinning machines (ISO 11111-2:2005) |
18.12.2009 |
|
|
|
EN ISO 11111-2:2005/A1:2009 |
18.12.2009 |
Note 3 |
Date expired (31.1.2010) |
|
|
CEN |
EN ISO 11111-3:2005 Textile machinery - Safety requirements - Part 3: Nonwoven machinery (ISO 11111-3:2005) |
18.12.2009 |
|
|
|
EN ISO 11111-3:2005/A1:2009 |
18.12.2009 |
Note 3 |
Date expired (31.1.2010) |
|
|
CEN |
EN ISO 11111-4:2005 Textile machinery - Safety requirements - Part 4: Yarn processing, cordage and rope manufacturing machinery (ISO 11111-4:2005) |
18.12.2009 |
|
|
|
EN ISO 11111-4:2005/A1:2009 |
18.12.2009 |
Note 3 |
Date expired (31.1.2010) |
|
|
CEN |
EN ISO 11111-5:2005 Textile machinery - Safety requirements - Part 5: Preparatory machinery to weaving and knitting (ISO 11111-5:2005) |
18.12.2009 |
|
|
|
EN ISO 11111-5:2005/A1:2009 |
18.12.2009 |
Note 3 |
Date expired (31.1.2010) |
|
|
CEN |
EN ISO 11111-6:2005 Textile machinery - Safety requirements - Part 6: Fabric manufacturing machinery (ISO 11111-6:2005) |
18.12.2009 |
|
|
|
EN ISO 11111-6:2005/A1:2009 |
18.12.2009 |
Note 3 |
Date expired (31.1.2010) |
|
|
CEN |
EN ISO 11111-7:2005 Textile machinery - Safety requirements - Part 7: Dyeing and finishing machinery (ISO 11111-7:2005) |
18.12.2009 |
|
|
|
EN ISO 11111-7:2005/A1:2009 |
18.12.2009 |
Note 3 |
Date expired (31.1.2010) |
|
|
CEN |
EN ISO 11145:2008 Optics and photonics - Lasers and laser-related equipment - Vocabulary and symbols (ISO 11145:2006) |
8.9.2009 |
|
|
|
CEN |
EN ISO 11148-3:2010 Hand-held non-electric power tools - Safety requirements - Part 3: Drills and tappers (ISO 11148-3:2010) |
8.4.2011 |
EN 792-3:2000+A1:2008 Note 2.1 |
Date expired (30.4.2011) |
|
CEN |
EN ISO 11148-4:2010 Hand-held non-electric power tools - Safety requirements - Part 4: Nonrotary percussive power tools (ISO 11148-4:2010) |
8.4.2011 |
EN 792-4:2000+A1:2008 Note 2.1 |
Date expired (30.4.2011) |
|
CEN |
EN ISO 11148-6:2010 Hand-held non-electric power tools - Safety requirements - Part 6: Assembly power tools for threaded fasteners (ISO 11148-6:2010) |
8.4.2011 |
EN 792-6:2000+A1:2008 Note 2.1 |
Date expired (30.4.2011) |
|
CEN |
EN ISO 11161:2007 Safety of machinery - Integrated manufacturing systems - Basic requirements (ISO 11161:2007) |
26.5.2010 |
|
|
|
EN ISO 11161:2007/A1:2010 |
26.5.2010 |
Note 3 |
Date expired (30.9.2010) |
|
|
CEN |
EN ISO 11200:2009 Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions (ISO 11200:1995, including Cor 1:1997) |
18.12.2009 |
|
|
|
CEN |
EN ISO 11201:2010 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010) |
20.10.2010 |
EN ISO 11201:2009 Note 2.1 |
Date expired (30.11.2010) |
|
CEN |
EN ISO 11202:2010 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections (ISO 11202:2010) |
20.10.2010 |
EN ISO 11202:2009 Note 2.1 |
Date expired (30.11.2010) |
|
CEN |
EN ISO 11203:2009 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level (ISO 11203:1995) |
18.12.2009 |
|
|
|
CEN |
EN ISO 11204:2010 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections (ISO 11204:2010) |
20.10.2010 |
EN ISO 11204:2009 Note 2.1 |
Date expired (30.11.2010) |
|
CEN |
EN ISO 11205:2009 Acoustics - Noise emitted by machinery and equipment - Engineering method for the determination of emission sound pressure levels in situ at the work station and at other specified positions using sound intensity (ISO 11205:2003) |
18.12.2009 |
|
|
|
CEN |
EN ISO 11252:2008 Lasers and laser-related equipment - Laser device - Minimum requirements for documentation (ISO 11252:2004) |
8.9.2009 |
|
|
|
CEN |
EN ISO 11546-1:2009 Acoustics - Determination of sound insulation performances of enclosures - Part 1: Measurements under laboratory conditions (for declaration purposes) (ISO 11546-1:1995) |
18.12.2009 |
|
|
|
CEN |
EN ISO 11546-2:2009 Acoustics - Determination of sound insulation performances of enclosures - Part 2: Measurements in situ (for acceptance and verification purposes) (ISO 11546-2:1995) |
18.12.2009 |
|
|
|
CEN |
EN ISO 11553-1:2008 Safety of machinery - Laser processing machines - Part 1: General safety requirements (ISO 11553-1:2005) |
8.9.2009 |
|
|
|
CEN |
EN ISO 11553-2:2008 Safety of machinery - Laser processing machines - Part 2: Safety requirements for hand-held laser processing devices (ISO 11553-2:2007) |
8.9.2009 |
|
|
|
CEN |
EN ISO 11554:2008 Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power, energy and temporal characteristics (ISO 11554:2006) |
8.9.2009 |
|
|
|
CEN |
EN ISO 11680-1:2008 Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 1: Units fitted with an integral combustion engine (ISO 11680-1:2000) |
8.9.2009 |
|
|
|
CEN |
EN ISO 11680-2:2008 Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 2: Units for use with a back-pack power source (ISO 11680-2:2000) |
8.9.2009 |
|
|
|
CEN |
EN ISO 11681-1:2008 Machinery for forestry - Portable chain-saw safety requirements and testing - Part 1: Chain-saws for forest service (ISO 11681-1:2004, including Amd 1:2007) |
8.9.2009 |
|
|
|
CEN |
EN ISO 11681-2:2008 Machinery for forestry - Portable chain-saw safety requirements and testing - Part 2: Chain-saws for tree service (ISO 11681-2:2006) |
8.9.2009 |
|
|
|
CEN |
EN ISO 11688-1:2009 Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995) |
18.12.2009 |
|
|
|
CEN |
EN ISO 11691:2009 Acoustics - Measurement of insertion loss of ducted silencers without flow - Laboratory survey method (ISO 11691:1995) |
18.12.2009 |
|
|
|
CEN |
EN ISO 11806:2008 Agricultural and forestry machinery - Portable hand-held combustion engine driven brush cutters and grass trimmers - Safety (ISO 11806:1997) |
8.9.2009 |
|
|
|
CEN |
EN ISO 11957:2009 Acoustics - Determination of sound insulation performance of cabins - Laboratory and in situ measurements (ISO 11957:1996) |
18.12.2009 |
|
|
|
CEN |
EN 12001:2003+A1:2009 Conveying, spraying and placing machines for concrete and mortar - Safety requirements |
26.5.2010 |
|
|
|
CEN |
EN 12012-1:2007+A1:2008 Plastics and rubber machines - Size reduction machines - Part 1: Safety requirements for blade granulators |
8.9.2009 |
|
|
|
CEN |
EN 12012-3:2001+A1:2008 Plastics and rubber machines - Size reduction machines - Part 3: Safety requirements for shredders |
8.9.2009 |
|
|
|
CEN |
EN 12012-4:2006+A1:2008 Plastics and rubber machines - Size reduction machines - Part 4: Safety requirements for agglomerators |
8.9.2009 |
|
|
|
CEN |
EN 12013:2000+A1:2008 Plastics and rubber machines - Internal mixers - Safety requirements |
8.9.2009 |
|
|
|
CEN |
EN 12016:2004+A1:2008 Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks - Immunity |
8.9.2009 |
|
|
|
CEN |
EN 12041:2000+A1:2009 Food processing machinery - Moulders - Safety and hygiene requirements |
18.12.2009 |
|
|
|
CEN |
EN 12042:2005+A1:2010 Food processing machinery - Automatic dividers - Safety and hygiene requirements |
8.4.2011 |
|
|
|
CEN |
EN 12043:2000+A1:2010 Food processing machinery - Intermediate provers - Safety and hygiene requirements |
8.4.2011 |
|
|
|
CEN |
EN 12044:2005+A1:2009 Footwear, leather and imitation leather goods manufacturing machines - Cutting and punching machines - Safety requirements |
18.12.2009 |
|
|
|
CEN |
EN 12053:2001+A1:2008 Safety of industrial trucks - Test methods for measuring noise emissions |
8.9.2009 |
|
|
|
CEN |
EN 12077-2:1998+A1:2008 Cranes safety - Requirements for health and safety - Part 2: Limiting and indicating devices |
8.9.2009 |
|
|
|
CEN |
EN ISO 12100:2010 Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO 12100:2010) |
8.4.2011 |
EN ISO 12100-1:2003 EN ISO 12100-2:2003 EN ISO 14121-1:2007 Note 2.1 |
30.11.2013 |
|
CEN |
EN 12110:2002+A1:2008 Tunnelling machines - Air locks - Safety requirements |
8.9.2009 |
|
|
|
CEN |
EN 12111:2002+A1:2009 Tunnelling machines - Road headers, continuous miners and impact rippers - Safety requirements |
18.12.2009 |
|
|
|
CEN |
EN 12158-1:2000+A1:2010 Builders' hoists for goods - Part 1: Hoists with accessible platforms |
8.4.2011 |
|
|
|
CEN |
EN 12158-2:2000+A1:2010 Builders' hoists for goods - Part 2: Inclined hoists with non-accessible load carrying devices |
8.4.2011 |
|
|
|
CEN |
EN 12159:2000+A1:2009 Builders hoists for persons and materials with vertically guided cages |
18.12.2009 |
|
|
|
CEN |
EN 12162:2001+A1:2009 Liquid pumps - Safety requirements - Procedure for hydrostatic testing |
8.9.2009 |
|
|
|
CEN |
EN 12198-1:2000+A1:2008 Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 1: General principles |
8.9.2009 |
|
|
|
CEN |
EN 12198-2:2002+A1:2008 Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 2: Radiation emission measurement procedure |
8.9.2009 |
|
|
|
CEN |
EN 12198-3:2002+A1:2008 Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 3: Reduction of radiation by attenuation or screening |
8.9.2009 |
|
|
|
CEN |
EN 12203:2003+A1:2009 Footwear, leather and imitation leather goods manufacturing machines - Shoe and leather presses - Safety requirements |
18.12.2009 |
|
|
|
CEN |
EN 12254:2010 Screens for laser working places - Safety requirements and testing |
26.5.2010 |
EN 12254:1998+A2:2008 Note 2.1 |
Date expired (30.9.2010) |
|
CEN |
EN 12267:2003+A1:2010 Food processing machinery - Circular saw machines - Safety and hygiene requirements |
20.10.2010 |
|
|
|
CEN |
EN 12268:2003+A1:2010 Food processing machinery - Band saw machines - Safety and hygiene requirements |
20.10.2010 |
|
|
|
CEN |
EN 12301:2000+A1:2008 Plastics and rubber machines - Calenders - Safety requirements |
8.9.2009 |
|
|
|
CEN |
EN 12312-1:2001+A1:2009 Aircraft ground support equipment - Specific requirements - Part 1: Passenger stairs |
8.9.2009 |
|
|
|
CEN |
EN 12312-2:2002+A1:2009 Aircraft ground support equipment - Specific requirements - Part 2: Catering vehicles |
8.9.2009 |
|
|
|
CEN |
EN 12312-3:2003+A1:2009 Aircraft ground support equipment - Specific requirements - Part 3: Conveyor belt vehicles |
8.9.2009 |
|
|
|
CEN |
EN 12312-4:2003+A1:2009 Aircraft ground support equipment - Specific requirements - Part 4: Passenger boarding bridges |
8.9.2009 |
|
|
|
CEN |
EN 12312-5:2005+A1:2009 Aircraft ground support equipment - Specific requirements - Part 5: Aircraft fuelling equipment |
8.9.2009 |
|
|
|
CEN |
EN 12312-6:2004+A1:2009 Aircraft ground support equipment - Specific requirements - Part 6: Deicers and deicing/antiicing equipment |
8.9.2009 |
|
|
|
CEN |
EN 12312-7:2005+A1:2009 Aircraft ground support equipment - Specific requirements - Part 7: Air-craft movement equipment |
8.9.2009 |
|
|
|
CEN |
EN 12312-8:2005+A1:2009 Aircraft ground support equipment - Specific requirements - Part 8: Maintenance stairs and platforms |
8.9.2009 |
|
|
|
CEN |
EN 12312-9:2005+A1:2009 Aircraft ground support equipment - Specific requirements - Part 9: Container/Pallet loaders |
8.9.2009 |
|
|
|
Warning: This publication does not concern clause 5.6 of the standard, the application of which does not confer a presumption of conformity with the essential health and safety requirement 1.5.15 of Annex I to Directive 2006/42/EC, in conjunction with the requirement 1.1.2(b) of that Annex. |
||||
|
CEN |
EN 12312-10:2005+A1:2009 Aircraft ground support equipment - Specific requirements - Part 10: Container/Pallet transfer transporters |
8.9.2009 |
|
|
|
CEN |
EN 12312-12:2002+A1:2009 Aircraft ground support equipment - Specific requirements - Part 12: Potable water service equipment |
8.9.2009 |
|
|
|
CEN |
EN 12312-13:2002+A1:2009 Aircraft ground support equipment - Specific requirements - Part 13: Lavatory service equipment |
8.9.2009 |
|
|
|
CEN |
EN 12312-14:2006+A1:2009 Aircraft ground support equipment - Specific requirements - Part 14: Disabled/incapacitated passenger boarding vehicles |
8.9.2009 |
|
|
|
CEN |
EN 12312-15:2006+A1:2009 Aircraft ground support equipment - Specific requirements - Part 15: Baggage and equipment tractors |
8.9.2009 |
|
|
|
CEN |
EN 12312-16:2005+A1:2009 Aircraft ground support equipment - Specific requirements - Part 16: Air start equipment |
8.9.2009 |
|
|
|
CEN |
EN 12312-17:2004+A1:2009 Aircraft ground support equipment - Specific requirements - Part 17: Air conditioning equipment |
8.9.2009 |
|
|
|
CEN |
EN 12312-18:2005+A1:2009 Aircraft ground support equipment - Specific requirements - Part 18: Nitrogen or Oxygen units |
8.9.2009 |
|
|
|
CEN |
EN 12312-19:2005+A1:2009 Aircraft ground support equipment - Specific requirements - Part 19: Aircraft jacks, axle jacks and hydraulic tail stanchions |
8.9.2009 |
|
|
|
CEN |
EN 12312-20:2005+A1:2009 Aircraft ground support equipment - Specific requirements - Part 20: Electrical ground power units |
8.9.2009 |
|
|
|
CEN |
EN 12321:2003+A1:2009 Underground mining machinery - Specification for the safety requirements of armoured face conveyors |
8.9.2009 |
|
|
|
CEN |
EN 12331:2003+A2:2010 Food processing machinery - Mincing machines - Safety and hygiene requirements |
20.10.2010 |
|
|
|
CEN |
EN 12336:2005+A1:2008 Tunnelling machines - Shield machines, thrust boring machines, auger boring machines, lining erection equipment - Safety requirements |
8.9.2009 |
|
|
|
CEN |
EN 12348:2000+A1:2009 Core drilling machines on stand - Safety |
8.9.2009 |
|
|
|
CEN |
EN 12355:2003+A1:2010 Food processing machinery - Derinding-, skinning- and membrane removal machines - Safety and hygiene requirements |
20.10.2010 |
|
|
|
CEN |
EN 12385-1:2002+A1:2008 Steel wire ropes - Safety - Part 1: General requirements |
8.9.2009 |
|
|
|
CEN |
EN 12385-2:2002+A1:2008 Steel wire ropes - Safety - Part 2: Definitions, designation and classification |
8.9.2009 |
|
|
|
CEN |
EN 12385-3:2004+A1:2008 Steel wire ropes - Safety - Part 3: Information for use and maintenance |
8.9.2009 |
|
|
|
CEN |
EN 12385-4:2002+A1:2008 Steel wire ropes - Safety - Part 4: Stranded ropes for general lifting applications |
8.9.2009 |
|
|
|
CEN |
EN 12385-10:2003+A1:2008 Steel wire ropes - Safety - Part 10: Spiral ropes for general structural applications |
8.9.2009 |
|
|
|
CEN |
EN 12387:2005+A1:2009 Footwear, leather and imitation leather goods manufacturing machines - Modular shoe repair equipment - Safety requirements |
18.12.2009 |
|
|
|
CEN |
EN 12409:2008 Plastics and rubber machines - Thermoforming machines - Safety requirements |
8.9.2009 |
|
|
|
CEN |
EN 12417:2001+A2:2009 Machine tools - Safety - Machining centres |
8.9.2009 |
|
|
|
EN 12417:2001+A2:2009/AC:2010 |
|
|
|
|
|
CEN |
EN 12418:2000+A1:2009 Masonry and stone cutting-off machines for job site - Safety |
8.9.2009 |
|
|
|
CEN |
EN 12463:2004+A1:2011 Food processing machinery - Filling machines and auxiliary machines - Safety and hygiene requirements |
20.7.2011 |
|
|
|
CEN |
EN 12505:2000+A1:2009 Food processing machinery - Centrifugal machines for processing edible oils and fats - Safety and hygiene requirements |
18.12.2009 |
|
|
|
CEN |
EN 12525:2000+A2:2010 Agricultural machinery - Front loaders - Safety |
26.5.2010 |
|
|
|
CEN |
EN 12545:2000+A1:2009 Footwear, leather and imitation leather goods manufacturing machines - Noise test code - Common requirements |
8.9.2009 |
|
|
|
CEN |
EN 12547:1999+A1:2009 Centrifuges - Common safety requirements |
8.9.2009 |
|
|
|
CEN |
EN 12549:1999+A1:2008 Acoustics - Noise test code for fastener driving tools - Engineering method |
8.9.2009 |
|
|
|
CEN |
EN 12581:2005+A1:2010 Coating plants - Machinery for dip coating and electrodeposition of organic liquid coating material - Safety requirements |
20.10.2010 |
|
|
|
CEN |
EN 12601:2010 Reciprocating internal combustion engine driven generating sets - Safety |
8.4.2011 |
|
|
|
CEN |
EN 12621:2006+A1:2010 Machinery for the supply and circulation of coating materials under pressure - Safety requirements |
20.10.2010 |
|
|
|
CEN |
EN 12622:2009 Safety of machine tools - Hydraulic press brakes |
26.5.2010 |
|
|
|
CEN |
EN 12629-1:2000+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 1: Common requirements |
8.4.2011 |
|
|
|
CEN |
EN 12629-2:2002+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 2: Block making machines |
8.4.2011 |
|
|
|
CEN |
EN 12629-3:2002+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 3: Slide and turntable machines |
8.4.2011 |
|
|
|
CEN |
EN 12629-4:2001+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 4:Concrete roof tile making machines |
8.4.2011 |
|
|
|
CEN |
EN 12629-5-1:2003+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-1: Pipe making machines manufacturing in the vertical axis |
8.4.2011 |
|
|
|
CEN |
EN 12629-5-2:2003+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-2: Pipe making machines manufacturing in the horizontal axis |
8.4.2011 |
|
|
|
CEN |
EN 12629-5-3:2003+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-3: Pipe prestressing machines |
8.4.2011 |
|
|
|
CEN |
EN 12629-5-4:2003+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-4: Concrete pipe coating machines |
8.4.2011 |
|
|
|
CEN |
EN 12629-6:2004+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 6: Stationary and mobile equipment for the manufacture of precast reinforced products |
8.4.2011 |
|
|
|
CEN |
EN 12629-7:2004+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 7: Stationary and mobile equipment for long line manufacture of prestressed products |
8.4.2011 |
|
|
|
CEN |
EN 12629-8:2002+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 8: Machines and equipment for the manufacture of constructional products from calcium-silicate (and concrete) |
8.4.2011 |
|
|
|
CEN |
EN 12635:2002+A1:2008 Industrial, commercial and garage doors and gates - Installation and use |
8.9.2009 |
|
|
|
CEN |
EN 12643:1997+A1:2008 Earth-moving machinery - Rubber-tyred machines - Steering requirements (ISO 5010:1992 modified) |
8.9.2009 |
|
|
|
CEN |
EN 12644-1:2001+A1:2008 Cranes - Information for use and testing - Part 1: Instructions |
8.9.2009 |
|
|
|
CEN |
EN 12644-2:2000+A1:2008 Cranes - Information for use and testing - Part 2: Marking |
8.9.2009 |
|
|
|
CEN |
EN 12649:2008+A1:2011 Concrete compactors and smoothing machines - Safety |
This is the first publication |
EN 12649:2008 Note 2.1 |
31.1.2012 |
|
CEN |
EN 12653:1999+A2:2009 Footwear, leather and imitation leather manufacturing machines - Nailing machines - Safety requirements |
18.12.2009 |
|
|
|
CEN |
EN 12693:2008 Refrigerating systems and heat pumps - Safety and environmental requirements - Positive displacement refrigerant compressors |
8.9.2009 |
|
|
|
CEN |
EN 12717:2001+A1:2009 Safety of machine tools - Drilling machines |
8.9.2009 |
|
|
|
CEN |
EN 12733:2001+A1:2009 Agricultural and forestry machinery - Pedestrian controlled motor mowers - Safety |
8.9.2009 |
|
|
|
CEN |
EN 12750:2001+A1:2009 Safety of woodworking machines - Four-sided moulding machines |
18.12.2009 |
|
|
|
CEN |
EN 12753:2005+A1:2010 Thermal cleaning systems for exhaust gas from surface treatment equipment - Safety requirements |
20.10.2010 |
|
|
|
CEN |
EN 12757-1:2005+A1:2010 Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing |
20.10.2010 |
|
|
|
CEN |
EN 12779:2004+A1:2009 Safety of woodworking machines - Chip and dust extraction systems with fixed installation - Safety related performances and safety requirements |
18.12.2009 |
|
|
|
CEN |
EN 12851:2005+A1:2010 Food processing machinery - Catering attachments for machines having an auxiliary drive hub - Safety and hygiene requirements |
26.5.2010 |
|
|
|
CEN |
EN 12852:2001+A1:2010 Food processing machinery - Food processors and blenders - Safety and hygiene requirements |
20.10.2010 |
|
|
|
CEN |
EN 12853:2001+A1:2010 Food processing machinery - Hand-held blenders and whisks - Safety and hygiene requirements |
20.10.2010 |
|
|
|
EN 12853:2001+A1:2010/AC:2010 |
|
|
|
|
|
CEN |
EN 12854:2003+A1:2010 Food processing machinery - Beam mixers - Safety and hygiene requirements |
26.5.2010 |
|
|
|
CEN |
EN 12855:2003+A1:2010 Food processing machinery - Rotating bowl cutters - Safety and hygiene requirements |
20.10.2010 |
|
|
|
CEN |
EN 12881-1:2005+A1:2008 Conveyor belts - Fire simulation flammability testing - Part 1: Propane burner tests |
8.9.2009 |
|
|
|
CEN |
EN 12881-2:2005+A1:2008 Conveyor belts - Fire simulation flammability testing - Part 2: Large scale fire test |
8.9.2009 |
|
|
|
CEN |
EN 12882:2008 Conveyor belts for general purpose use - Electrical and flammability safety requirements |
8.9.2009 |
|
|
|
CEN |
EN 12921-1:2005+A1:2010 Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 1: Common safety requirements |
20.10.2010 |
|
|
|
CEN |
EN 12921-2:2005+A1:2008 Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 2: Safety of machines using water based cleaning liquids |
8.9.2009 |
|
|
|
CEN |
EN 12921-3:2005+A1:2008 Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 3: Safety of machines using flammable cleaning liquids |
8.9.2009 |
|
|
|
CEN |
EN 12921-4:2005+A1:2008 Machines for surface cleaning and pretreatment of industrial items using liquids and vapours - Part 4: Safety of machines using halogenated solvents |
8.9.2009 |
|
|
|
CEN |
EN 12957:2001+A1:2009 Machine tools - Safety - Electro discharge machines |
8.9.2009 |
|
|
|
CEN |
EN 12965:2003+A2:2009 Tractors and machinery for agriculture and forestry - Power take-off (PTO) drive shafts and their guards - Safety |
18.12.2009 |
|
|
|
CEN |
EN 12978:2003+A1:2009 Industrial, commercial and garage doors and gates - Safety devices for power operated doors and gates - Requirements and test methods |
18.12.2009 |
|
|
|
CEN |
EN 12981:2005+A1:2009 Coating plants - Spray booths for application of organic powder coating material - Safety requirements |
8.9.2009 |
|
|
|
CEN |
EN 12984:2005+A1:2010 Food processing machinery - Portable and/or hand-guided machines and appliances with mechanically driven cutting tools - Safety and hygiene requirements |
20.10.2010 |
|
|
|
CEN |
EN 12999:2011 Cranes - Loader cranes |
8.4.2011 |
|
|
|
CEN |
EN 13000:2010 Cranes - Mobile cranes |
26.5.2010 |
|
|
|
EN 13000:2010/AC:2010 |
|
|
|
|
|
CEN |
EN 13001-1:2004+A1:2009 Cranes - General design - Part 1: General principles and requirements |
8.9.2009 |
|
|
|
EN 13001-1:2004+A1:2009/AC:2009 |
|
|
|
|
|
CEN |
EN 13001-2:2011 Crane safety - General design - Part 2: Load actions |
This is the first publication |
EN 13001-2:2004+A3:2009 Note 2.1 |
Date expired (18.11.2011) |
|
CEN |
EN 13015:2001+A1:2008 Maintenance for lifts and escalators - Rules for maintenance instructions |
8.9.2009 |
|
|
|
CEN |
EN 13019:2001+A1:2008 Machines for road surface cleaning - Safety requirements |
8.9.2009 |
|
|
|
CEN |
EN 13020:2004+A1:2010 Road surface treatment machines - Safety requirements |
20.10.2010 |
|
|
|
CEN |
EN 13021:2003+A1:2008 Winter service machines - Safety requirements |
8.9.2009 |
|
|
|
CEN |
EN 13023:2003+A1:2010 Noise measurement methods for printing, paper converting, paper making machines and auxiliary equipment - Accuracy grades 2 and 3 |
26.5.2010 |
|
|
|
CEN |
EN 13035-1:2008 Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 1: Storage, handling and transportation equipment inside the factory |
8.9.2009 |
|
|
|
CEN |
EN 13035-2:2008 Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 2: Storage, handling and transportation equipment outside the factory |
8.9.2009 |
|
|
|
CEN |
EN 13035-3:2003+A1:2009 Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 3: Cutting machines |
18.12.2009 |
|
|
|
EN 13035-3:2003+A1:2009/AC:2010 |
|
|
|
|
|
CEN |
EN 13035-4:2003+A1:2009 Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 4: Tilting tables |
26.5.2010 |
|
|
|
CEN |
EN 13035-5:2006+A1:2009 Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 5: Machines and installations for stacking and de-stacking |
26.5.2010 |
|
|
|
CEN |
EN 13035-6:2006+A1:2009 Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 6: Machines for break-out |
26.5.2010 |
|
|
|
CEN |
EN 13035-7:2006+A1:2009 Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 7: Cutting machines for laminated glass |
26.5.2010 |
|
|
|
CEN |
EN 13035-9:2006+A1:2010 Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 9: Washing installations |
26.5.2010 |
|
|
|
CEN |
EN 13035-11:2006+A1:2010 Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 11: Drilling machines |
26.5.2010 |
|
|
|
CEN |
EN 13042-1:2007+A1:2009 Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 1: Gob feeder |
18.12.2009 |
|
|
|
CEN |
EN 13042-2:2004+A1:2009 Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 2: Handling machines for feeding |
18.12.2009 |
|
|
|
CEN |
EN 13042-3:2007+A1:2009 Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 3: IS machines |
18.12.2009 |
|
|
|
CEN |
EN 13042-5:2003+A1:2009 Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 5: Presses |
18.12.2009 |
|
|
|
CEN |
EN 13059:2002+A1:2008 Safety of industrial trucks - Test methods for measuring vibration |
8.9.2009 |
|
|
|
CEN |
EN 13102:2005+A1:2008 Ceramic machines - Safety - Loading and unloading of fine clay tiles |
8.9.2009 |
|
|
|
CEN |
EN 13112:2002+A1:2009 Tannery machines - Splitting and bandknife shearing machines - Safety requirements |
26.5.2010 |
|
|
|
CEN |
EN 13113:2002+A1:2010 Tannery machines - Roller coating machines - Safety requirements |
8.4.2011 |
|
|
|
CEN |
EN 13114:2002+A1:2009 Tannery machines - Rotating process vessels - Safety requirements |
26.5.2010 |
|
|
|
CEN |
EN 13118:2000+A1:2009 Agricultural machinery - Potato harvesting equipment - Safety |
18.12.2009 |
|
|
|
CEN |
EN 13120:2009 Internal blinds - Performance requirements including safety |
8.9.2009 |
|
|
|
CEN |
EN 13128:2001+A2:2009 Safety of machine tools - Milling machines (including boring machines) |
8.9.2009 |
|
|
|
EN 13128:2001+A2:2009/AC:2010 |
|
|
|
|
|
CEN |
EN 13135-1:2003+A1:2010 Cranes - Equipment - Part 1: Electrotechnical equipment |
20.10.2010 |
|
|
|
CEN |
EN 13135-2:2004+A1:2010 Cranes - Equipment - Part 2: Non-electrotechnical equipment |
8.4.2011 |
|
|
|
CEN |
EN 13140:2000+A1:2009 Agricultural machinery - Sugar beet and fodder beet harvesting equipment - Safety |
18.12.2009 |
|
|
|
CEN |
EN 13155:2003+A2:2009 Cranes - Safety - Non-fixed load lifting attachments |
8.9.2009 |
|
|
|
CEN |
EN 13157:2004+A1:2009 Cranes - Safety - Hand powered cranes |
18.12.2009 |
|
|
|
CEN |
EN 13208:2003+A1:2010 Food processing machinery - Vegetable peelers - Safety and hygiene requirements |
20.10.2010 |
|
|
|
CEN |
EN 13218:2002+A1:2008 Machine tools - Safety - Stationary grinding machines |
8.9.2009 |
|
|
|
EN 13218:2002+A1:2008/AC:2010 |
|
|
|
|
|
CEN |
EN 13241-1:2003+A1:2011 Industrial, commercial and garage doors and gates - Product standard - Part 1: Products without fire resistance or smoke control characteristics |
This is the first publication |
|
|
|
CEN |
EN 13288:2005+A1:2009 Food processing machinery - Bowl lifting and tilting machines - Safety and hygiene requirements |
26.5.2010 |
|
|
|
CEN |
EN 13355:2004+A1:2009 Coating plants - Combined booths - Safety requirements |
8.9.2009 |
|
|
|
CEN |
EN 13367:2005+A1:2008 Ceramic machines - Safety - Transfer platforms and cars |
8.9.2009 |
|
|
|
EN 13367:2005+A1:2008/AC:2009 |
|
|
|
|
|
CEN |
EN 13389:2005+A1:2009 Food processing machinery - Mixers with horizontal shafts - Safety and hygiene requirements |
26.5.2010 |
|
|
|
CEN |
EN 13390:2002+A1:2009 Food processing machinery - Pie and tart machines - Safety and hygiene requirements |
26.5.2010 |
|
|
|
CEN |
EN 13411-1:2002+A1:2008 Terminations for steel wire ropes - Safety - Part 1: Thimbles for steel wire rope slings |
8.9.2009 |
|
|
|
CEN |
EN 13411-2:2001+A1:2008 Terminations for steel wire ropes - Safety - Part 2: Splicing of eyes for wire rope slings |
8.9.2009 |
|
|
|
CEN |
EN 13411-3:2004+A1:2008 Terminations for steel wire ropes - Safety - Part 3: Ferrules and ferrule-securing |
8.9.2009 |
|
|
|
CEN |
EN 13411-4:2011 Terminations for steel wire ropes - Safety - Part 4: Metal and resin socketing |
20.7.2011 |
EN 13411-4:2002+A1:2008 Note 2.1 |
Date expired (30.9.2011) |
|
CEN |
EN 13411-5:2003+A1:2008 Terminations for steel wire ropes - Safety - Part 5: U-bolt wire rope grips |
8.9.2009 |
|
|
|
CEN |
EN 13411-6:2004+A1:2008 Terminations for steel wire ropes - Safety - Part 6: Asymmetric wedge socket |
8.9.2009 |
|
|
|
CEN |
EN 13411-7:2006+A1:2008 Terminations for steel wire ropes - Safety - Part 7: Symmetric wedge socket |
8.9.2009 |
|
|
|
CEN |
EN 13411-8:2011 Terminations for steel wire ropes - Safety - Part 8: Swage terminals and swaging |
This is the first publication |
|
|
|
CEN |
EN 13414-1:2003+A2:2008 Steel wire rope slings - Safety - Part 1: Slings for general lifting service |
8.9.2009 |
|
|
|
CEN |
EN 13414-2:2003+A2:2008 Steel wire rope slings - Safety - Part 2: Specification for information for use and maintenance to be provided by the manufacturer |
8.9.2009 |
|
|
|
CEN |
EN 13414-3:2003+A1:2008 Steel wire rope slings - Safety - Part 3: Grommets and cable-laid slings |
8.9.2009 |
|
|
|
CEN |
EN 13418:2004+A1:2008 Plastics and rubber machines - Winding machines for film or sheet - Safety requirements |
8.9.2009 |
|
|
|
CEN |
EN 13448:2001+A1:2009 Agricultural and forestry machinery - Inter-row mowing units - Safety |
18.12.2009 |
|
|
|
CEN |
EN 13457:2004+A1:2010 Footwear, leather and imitation leather goods manufacturing machines - Splitting, skiving, cutting, cementing and cement drying machines - Safety requirements |
20.10.2010 |
|
|
|
CEN |
EN 13478:2001+A1:2008 Safety of machinery - Fire prevention and protection |
8.9.2009 |
|
|
|
CEN |
EN 13490:2001+A1:2008 Mechanical vibration - Industrial trucks - Laboratory evaluation and specification of operator seat vibration |
8.9.2009 |
|
|
|
CEN |
EN 13524:2003+A1:2009 Highway maintenance machines - Safety requirements |
8.9.2009 |
|
|
|
CEN |
EN 13525:2005+A2:2009 Forestry machinery - Wood chippers - Safety |
18.12.2009 |
|
|
|
CEN |
EN 13531:2001+A1:2008 Earth-moving machinery - Tip-over protection structure (TOPS) for compact excavators - Laboratory tests and performance requirements (ISO 12117:1997 modified) |
8.9.2009 |
|
|
|
CEN |
EN 13534:2006+A1:2010 Food processing machinery - Curing injection machines - Safety and hygiene requirements |
20.10.2010 |
|
|
|
CEN |
EN 13557:2003+A2:2008 Cranes - Controls and control stations |
8.9.2009 |
|
|
|
CEN |
EN 13561:2004+A1:2008 External blinds - Performance requirements including safety |
8.9.2009 |
|
|
|
CEN |
EN 13570:2005+A1:2010 Food processing machinery - Mixing machines - Safety and hygiene requirements |
20.10.2010 |
|
|
|
CEN |
EN 13586:2004+A1:2008 Cranes - Access |
8.9.2009 |
|
|
|
CEN |
EN 13591:2005+A1:2009 Food processing machinery - Fixed deck oven loaders - Safety and hygiene requirements |
26.5.2010 |
|
|
|
CEN |
EN 13617-1:2004+A1:2009 Petrol filling stations - Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units |
8.9.2009 |
|
|
|
CEN |
EN 13621:2004+A1:2010 Food processing machinery - Salad dryers - Safety and hygiene requirements |
20.10.2010 |
|
|
|
CEN |
EN 13659:2004+A1:2008 Shutters - Performance requirements including safety |
8.9.2009 |
|
|
|
CEN |
EN 13675:2004+A1:2010 Safety of machinery - Safety requirements for tube forming and rolling mills and their finishing line equipment |
20.10.2010 |
|
|
|
CEN |
EN 13683:2003+A2:2011 Garden equipment - Integrally powered shredders/chippers - Safety |
20.7.2011 |
|
|
|
CEN |
EN 13684:2004+A3:2009 Garden equipment - Pedestrian controlled lawn aerators and scarifiers - Safety |
26.5.2010 |
EN 13684:2004+A2:2009 Note 2.1 |
Date expired (30.6.2010) |
|
CEN |
EN 13731:2007 Lifting bag systems for fire and rescue service use - Safety and performance requirements |
8.9.2009 |
|
|
|
CEN |
EN 13732:2002+A2:2009 Food processing machinery - Bulk Milk Coolers on Farms - Requirements for construction, performance, suitability for use, safety and hygiene |
8.9.2009 |
|
|
|
CEN |
EN ISO 13732-1:2008 Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1:2006) |
8.9.2009 |
|
|
|
CEN |
EN ISO 13732-3:2008 Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 3: Cold surfaces (ISO 13732-3:2005) |
8.9.2009 |
|
|
|
CEN |
EN 13736:2003+A1:2009 Safety of machine tools - Pneumatic presses |
8.9.2009 |
|
|
|
CEN |
EN ISO 13753:2008 Mechanical vibration and shock - Hand-arm vibration - Method for measuring the vibration transmissibility of resilient materials when loaded by the hand-arm system (ISO 13753:1998) |
8.9.2009 |
|
|
|
CEN |
EN ISO 13849-1:2008 Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2006) |
8.9.2009 |
EN ISO 13849-1:2006 EN 954-1:1996 Note 2.1 |
31.12.2011 |
|
EN ISO 13849-1:2008/AC:2009 |
|
|
|
|
|
CEN |
EN ISO 13849-2:2008 Safety of machinery - Safety-related parts of control systems - Part 2: Validation (ISO 13849-2:2003) |
8.9.2009 |
|
|
|
CEN |
EN ISO 13850:2008 Safety of machinery - Emergency stop - Principles for design (ISO 13850:2006) |
8.9.2009 |
|
|
|
CEN |
EN ISO 13855:2010 Safety of machinery - Positioning of safeguards with respect to the approach speeds of parts of the human body (ISO 13855:2010) |
20.10.2010 |
EN 999:1998+A1:2008 Note 2.1 |
Date expired (30.11.2010) |
|
CEN |
EN ISO 13857:2008 Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008) |
8.9.2009 |
|
|
|
CEN |
EN 13862:2001+A1:2009 Floor cutting-off machines - Safety |
8.9.2009 |
|
|
|
CEN |
EN 13870:2005+A1:2010 Food processing machinery - Chop cutting machines - Safety and hygiene requirements |
20.10.2010 |
|
|
|
CEN |
EN 13871:2005+A1:2010 Food processing machinery - Cubes cutting machinery - Safety and hygiene requirements |
20.10.2010 |
|
|
|
CEN |
EN 13885:2005+A1:2010 Food processing machinery - Clipping machines - Safety and hygiene requirements |
20.10.2010 |
|
|
|
CEN |
EN 13886:2005+A1:2010 Food processing machinery - Cooking kettles equipped with powered stirrer and/or mixer - Safety and hygiene requirements |
26.5.2010 |
|
|
|
CEN |
EN 13889:2003+A1:2008 Forged steel shackles for general lifting purposes - Dee shackles and bow shackles - Grade 6 - Safety |
8.9.2009 |
|
|
|
CEN |
EN 13898:2003+A1:2009 Machine tools - Safety - Sawing machines for cold metal |
8.9.2009 |
|
|
|
EN 13898:2003+A1:2009/AC:2010 |
|
|
|
|
|
CEN |
EN 13951:2003+A1:2008 Liquid pumps - Safety requirements - Agrifoodstuffs equipment - Design rules to ensure hygiene in use |
8.9.2009 |
|
|
|
CEN |
EN 13954:2005+A1:2010 Food processing machinery - Bread slicers - Safety and hygiene requirements |
26.5.2010 |
|
|
|
CEN |
EN 13977:2011 Railway applications - Track - Safety requirements for portable machines and trolleys for construction and maintenance |
20.7.2011 |
|
|
|
CEN |
EN 13985:2003+A1:2009 Machine tools - Safety - Guillotine shears |
8.9.2009 |
|
|
|
CEN |
EN 14010:2003+A1:2009 Safety of machinery - Equipment for power driven parking of motor vehicles - Safety and EMC requirements for design, manufacturing, erection and commissioning stages |
18.12.2009 |
|
|
|
CEN |
EN 14017:2005+A2:2009 Agricultural and forestry machinery - Solid fertilizer distributors - Safety |
18.12.2009 |
EN 14017:2005+A1:2008 Note 2.1 |
Date expired (31.1.2010) |
|
CEN |
EN 14018:2005+A1:2009 Agricultural and forestry machinery - Seed drills - Safety |
18.12.2009 |
|
|
|
CEN |
EN 14033-3:2009 Railway applications - Track - Railbound construction and maintenance machines - Part 3: General safety requirements |
26.5.2010 |
|
|
|
CEN |
EN 14043:2005+A1:2009 High rise aerial appliances for fire service use - Turntable ladders with combined movements - Safety and performance requirements and test methods |
8.9.2009 |
|
|
|
CEN |
EN 14044:2005+A1:2009 High rise aerial appliances for fire service use - Turntable ladders with sequential movements - Safety and performance requirements and test methods |
8.9.2009 |
|
|
|
CEN |
EN 14070:2003+A1:2009 Safety of machine tools - Transfer and special-purpose machines |
8.9.2009 |
|
|
|
EN 14070:2003+A1:2009/AC:2010 |
|
|
|
|
|
CEN |
EN ISO 14122-1:2001 Safety of machinery - Permanent means of access to machinery - Part 1: Choice of fixed means of access between two levels (ISO 14122-1:2001) |
20.10.2010 |
|
|
|
EN ISO 14122-1:2001/A1:2010 |
20.10.2010 |
Note 3 |
Date expired (31.10.2010) |
|
|
CEN |
EN ISO 14122-2:2001 Safety of machinery - Permanent means of access to machinery - Part 2: Working platforms and walkways (ISO 14122-2:2001) |
20.10.2010 |
|
|
|
EN ISO 14122-2:2001/A1:2010 |
20.10.2010 |
Note 3 |
Date expired (31.10.2010) |
|
|
CEN |
EN ISO 14122-3:2001 Safety of machinery - Permanent means of access to machinery - Part 3: Stairs, stepladders and guard-rails (ISO 14122-3:2001) |
20.10.2010 |
|
|
|
EN ISO 14122-3:2001/A1:2010 |
20.10.2010 |
Note 3 |
Date expired (31.10.2010) |
|
|
CEN |
EN ISO 14122-4:2004 Safety of machinery - Permanent means of access to machinery - Part 4: Fixed ladders (ISO 14122-4:2004) |
8.4.2011 |
|
|
|
EN ISO 14122-4:2004/A1:2010 |
8.4.2011 |
Note 3 |
Date expired (8.4.2011) |
|
|
CEN |
EN ISO 14159:2008 Safety of machinery - Hygiene requirements for the design of machinery (ISO 14159:2002) |
8.9.2009 |
|
|
|
CEN |
EN 14238:2004+A1:2009 Cranes - Manually controlled load manipulating devices |
18.12.2009 |
|
|
|
CEN |
EN ISO 14314:2009 Reciprocal internal combustion engines - Recoil starting equipment - General safety requirements (ISO 14314:2004) |
18.12.2009 |
|
|
|
CEN |
EN 14439:2006+A2:2009 Cranes - Safety - Tower cranes |
8.9.2009 |
|
|
|
CEN |
EN 14462:2005+A1:2009 Surface treatment equipment - Noise test code for surface treatment equipment including its ancillary handling equipment - Accuracy grades 2 and 3 |
8.9.2009 |
|
|
|
CEN |
EN 14466:2005+A1:2008 Fire-fighting pumps - Portable pumps - Safety and performance requirements, tests |
8.9.2009 |
|
|
|
CEN |
EN 14492-1:2006+A1:2009 Cranes - Power driven winches and hoists - Part 1: Power driven winches |
18.12.2009 |
|
|
|
EN 14492-1:2006+A1:2009/AC:2010 |
|
|
|
|
|
CEN |
EN 14492-2:2006+A1:2009 Cranes - Power driven winches and hoists - Part 2: Power driven hoists |
18.12.2009 |
|
|
|
EN 14492-2:2006+A1:2009/AC:2010 |
|
|
|
|
|
CEN |
EN 14502-2:2005+A1:2008 Cranes - Equipment for the lifting of persons - Part 2: Elevating control stations |
8.9.2009 |
|
|
|
CEN |
EN 14655:2005+A1:2010 Food processing machinery - Baguette slicers - Safety and hygiene requirements |
26.5.2010 |
|
|
|
CEN |
EN 14656:2006+A1:2010 Safety of machinery - Safety requirements for extrusion presses for steel and non-ferrous metals |
20.10.2010 |
|
|
|
CEN |
EN 14658:2005+A1:2010 Continuous handling equipment and systems - General safety requirements for continuous handling equipment for opencast lignite mining |
26.5.2010 |
|
|
|
CEN |
EN 14673:2006+A1:2010 Safety of machinery - Safety requirements for hydraulically powered open die hot forging presses for the forging of steel and non-ferrous metals |
20.10.2010 |
|
|
|
CEN |
EN 14677:2008 Safety of machinery - Secondary steelmaking - Machinery and equipment for treatment of liquid steel |
8.9.2009 |
|
|
|
CEN |
EN 14681:2006+A1:2010 Safety of machinery - Safety requirements for machinery and equipment for production of steel by electric arc furnaces |
20.10.2010 |
|
|
|
CEN |
EN 14710-1:2005+A2:2008 Fire-fighting pumps - Fire-fighting centrifugal pumps without primer - Part 1: Classification, general and safety requirements |
8.9.2009 |
|
|
|
CEN |
EN 14710-2:2005+A2:2008 Fire-fighting pumps - Fire-fighting centrifugal pumps without primer - Part 2: Verification of general and safety requirements |
8.9.2009 |
|
|
|
CEN |
EN ISO 14738:2008 Safety of machinery - Anthropometric requirements for the design of workstations at machinery (ISO 14738:2002, including Cor 1:2003 and Cor 2:2005) |
8.9.2009 |
|
|
|
CEN |
EN 14753:2007 Safety of machinery - Safety requirements for machinery and equipment for continuous casting of steel |
8.9.2009 |
|
|
|
CEN |
EN 14861:2004+A1:2009 Forest machinery - Self propelled machinery - Safety requirements |
18.12.2009 |
|
|
|
CEN |
EN 14886:2008 Plastics and rubber machines - Bandknife cutting machines for block foams - Safety requirements |
8.9.2009 |
|
|
|
CEN |
EN 14910:2007+A1:2009 Garden equipment - Walk-behind combustion engine powered trimmers - Safety |
8.9.2009 |
|
|
|
CEN |
EN 14930:2007+A1:2009 Agricultural and forestry machinery and gardening equipment - Pedestrian controlled and hand-held machines - Determination of accessibility of hot surfaces |
8.9.2009 |
|
|
|
CEN |
EN 14957:2006+A1:2010 Food processing machinery - Dishwashing machines with conveyor - Safety and hygiene requirements |
26.5.2010 |
|
|
|
CEN |
EN 14958:2006+A1:2009 Food processing machinery - Machinery for grinding and processing flour and semolina - Safety and hygiene requirements |
8.9.2009 |
|
|
|
CEN |
EN 14973:2006+A1:2008 Conveyor belts for use in underground installations - Electrical and flammability safety requirements |
8.9.2009 |
|
|
|
CEN |
EN ISO 14982:2009 Agricultural and forestry machinery - Electromagnetic compatibility - Test methods and acceptance criteria (ISO 14982:1998) |
8.9.2009 |
|
|
|
CEN |
EN 15000:2008 Safety of industrial trucks - Self propelled variable reach trucks - Specification, performance and test requirements for longitudinal load moment indicators and longitudinal load moment limiters |
8.9.2009 |
|
|
|
CEN |
EN 15011:2011 Cranes - Bridge and gantry cranes |
20.7.2011 |
|
|
|
CEN |
EN 15027:2007+A1:2009 Transportable wall saw and wire saw equipment for job site - Safety |
8.9.2009 |
|
|
|
CEN |
EN 15056:2006+A1:2009 Cranes - Requirements for container handling spreaders |
8.9.2009 |
|
|
|
CEN |
EN 15059:2009 Snow grooming equipment - Safety requirements |
8.9.2009 |
|
|
|
CEN |
EN 15061:2007+A1:2008 Safety of machinery - Safety requirements for strip processing line machinery and equipment |
8.9.2009 |
|
|
|
CEN |
EN 15067:2007 Plastics and rubber machines - Film converting machines for bags and sacks - Safety requirements |
8.9.2009 |
|
|
|
CEN |
EN 15093:2008 Safety of Machinery - Safety requirements for hot flat rolling mills |
8.9.2009 |
|
|
|
CEN |
EN 15094:2008 Safety of Machinery - Safety requirements for cold flat rolling mills |
8.9.2009 |
|
|
|
CEN |
EN 15095:2007+A1:2008 Power-operated mobile racking and shelving, carousels and storage lifts - Safety requirements |
8.9.2009 |
|
|
|
CEN |
EN 15162:2008 Machines and plants for mining and tooling of natural stone - Safety requirements for gang saws |
8.9.2009 |
|
|
|
CEN |
EN 15163:2008 Machines and installations for the exploitation and processing of natural stone - Safety - Requirements for diamond wire saws |
8.9.2009 |
|
|
|
CEN |
EN 15164:2008 Machines and plants for mining and tooling of natural stone - Safety - Requirements for chain- and belt-slotting machines |
8.9.2009 |
|
|
|
CEN |
EN 15166:2008 Food processing machinery - Automatic back splitting machines of butchery carcasses - Safety and hygiene requirements |
8.9.2009 |
|
|
|
CEN |
EN 15268:2008 Petrol filling stations - Safety requirements for the construction of submersible pump assemblies |
8.9.2009 |
|
|
|
CEN |
EN 15503:2009 Garden equipment - Garden blowers, vacuums and blower/vacuums - Safety |
26.5.2010 |
|
|
|
CEN |
EN ISO 15536-1:2008 Ergonomics - Computer manikins and body templates - Part 1: General requirements (ISO 15536-1:2005) |
8.9.2009 |
|
|
|
CEN |
EN 15695-1:2009 Agricultural tractors and self-propelled sprayers - Protection of the operator (driver) against hazardous substances - Part 1: Cab classification, requirements and test procedures |
26.5.2010 |
|
|
|
CEN |
EN 15695-2:2009 Agricultural tractors and self-propelled sprayers - Protection of the operator (driver) against hazardous substances - Part 2: Filters, requirements and test procedures |
26.5.2010 |
|
|
|
CEN |
EN ISO 15744:2008 Hand-held non-electric power tools - Noise measurement code - Engineering method (grade 2) (ISO 15744:2002) |
8.9.2009 |
|
|
|
CEN |
EN 15746-2:2010 Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements |
20.10.2010 |
|
|
|
CEN |
EN 15774:2010 Food processing machinery - Machines for processing fresh and filled pasta (tagliatelle, cannelloni, ravioli, tortellini, orecchiette and gnocchi) - Safety and hygiene requirements |
8.4.2011 |
|
|
|
CEN |
EN 15811:2009 Agricultural machinery - Guards for moving parts of power transmission - Guard opening with tool (ISO/TS 28923:2007 modified) |
18.12.2009 |
|
|
|
EN 15811:2009/AC:2010 |
|
|
|
|
|
CEN |
EN 15895:2011 Cartridge operated hand-held tools - Safety requirements - Fixing and hard marking tools |
This is the first publication |
|
|
|
CEN |
EN 15967:2011 Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapours |
This is the first publication |
|
|
|
CEN |
EN ISO 19432:2008 Building construction machinery and equipment - Portable, hand-held, internal combustion engine driven cut-off machines - Safety requirements and testing (ISO 19432:2006) |
8.9.2009 |
|
|
|
CEN |
EN ISO 20361:2009 Liquid pumps and pump units - Noise test code - Grades 2 and 3 of accuracy (ISO 20361:2007) |
8.9.2009 |
|
|
|
EN ISO 20361:2009/AC:2010 |
|
|
|
|
|
CEN |
EN ISO 20643:2008 Mechanical vibration - Hand-held and hand-guided machinery - Principles for evaluation of vibration emission (ISO 20643:2005) |
8.9.2009 |
|
|
|
CEN |
EN ISO 22867:2008 Forestry machinery - Vibration test code for portable hand-held machines with internal combustion engine - Vibration at the handles (ISO 22867:2004, including Cor 1:2006) |
8.9.2009 |
|
|
|
CEN |
EN ISO 22868:2011 Forestry and gardening machinery - Noise test code for portable hand-held machines with internal combustion engine - Engineering method (Grade 2 accuracy) (ISO 22868:2011) |
20.7.2011 |
EN ISO 22868:2008 Note 2.1 |
Date expired (30.9.2011) |
|
CEN |
EN ISO 23125:2010 Machine tools - Safety - Turning machines (ISO 23125:2010) |
20.10.2010 |
|
|
|
CEN |
EN ISO 28139:2009 Agricultural and forestry machinery - Knapsack combustion-engine-driven mistblowers - Safety requirements (ISO 28139:2009) |
18.12.2009 |
|
|
|
CEN |
EN ISO 28927-1:2009 Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 1: Angle and vertical grinders (ISO 28927-1:2009) |
26.5.2010 |
|
|
|
CEN |
EN ISO 28927-2:2009 Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 2: Wrenches, nutrunners and screwdrivers (ISO 28927-2:2009) |
26.5.2010 |
|
|
|
CEN |
EN ISO 28927-3:2009 Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 3: Polishers and rotary, orbital and random orbital sanders (ISO 28927-3:2009) |
26.5.2010 |
|
|
|
CEN |
EN ISO 28927-4:2010 Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 4: Straight grinders (ISO 28927-4:2010) |
8.4.2011 |
|
|
|
CEN |
EN ISO 28927-5:2009 Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 5: Drills and impact drills (ISO 28927-5:2009) |
26.5.2010 |
|
|
|
CEN |
EN ISO 28927-6:2009 Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 6: Rammers (ISO 28927-6:2009) |
26.5.2010 |
|
|
|
CEN |
EN ISO 28927-7:2009 Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 7: Nibblers and shears (ISO 28927-7:2009) |
26.5.2010 |
|
|
|
CEN |
EN ISO 28927-8:2009 Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 8: Saws, polishing and filing machines with reciprocating action and saws with oscillating or rotating action (ISO 28927-8:2009) |
26.5.2010 |
|
|
|
CEN |
EN ISO 28927-9:2009 Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 9: Scaling hammers and needle scalers (ISO 28927-9:2009) |
26.5.2010 |
|
|
|
CEN |
EN ISO 28927-10:2011 Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 10: Percussive drills, hammers and breakers (ISO 28927-10:2011) |
This is the first publication |
|
|
|
CEN |
EN ISO 28927-11:2011 Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 11: Stone hammers (ISO 28927-11:2011) |
20.7.2011 |
|
|
|
CEN |
EN 30326-1:1994 Mechanical vibration - Laboratory method for evaluating vehicle seat vibration - Part 1: Basic requirements (ISO 10326-1:1992) |
8.9.2009 |
|
|
|
EN 30326-1:1994/A1:2007 |
8.9.2009 |
Note 3 |
Date expired (28.12.2009) |
|
|
Cenelec |
EN 50223:2010 Stationary electrostatic application equipment for ignitable flock material - Safety requirements |
20.10.2010 |
|
|
|
Cenelec |
EN 50348:2010 Stationary electrostatic application equipment for non-ignitable liquid coating material - Safety requirements |
26.5.2010 |
|
|
|
EN 50348:2010/AC:2010 |
|
|
|
|
|
Cenelec |
EN 60204-1:2006 Safety of machinery - Electrical equipment of machines - Part 1: General requirements IEC 60204-1:2005 (Modified) |
26.5.2010 |
|
|
|
EN 60204-1:2006/A1:2009 IEC 60204-1:2005/A1:2008 |
26.5.2010 |
Note 3 |
1.2.2012 |
|
|
EN 60204-1:2006/AC:2010 |
|
|
|
|
|
Cenelec |
EN 60204-11:2000 Safety of machinery - Electrical equipment of machines - Part 11: Requirements for HV equipment for voltages above 1 000 V a.c. or 1 500 V d.c. and not exceeding 36 kV IEC 60204-11:2000 |
26.5.2010 |
|
|
|
EN 60204-11:2000/AC:2010 |
|
|
|
|
|
Cenelec |
EN 60204-32:2008 Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines IEC 60204-32:2008 |
18.12.2009 |
|
|
|
Cenelec |
EN 60204-33:2011 Safety of machinery - Electrical equipment of machines - Part 33: Requirements for semiconductor fabrication equipment IEC 60204-33:2009 (Modified) |
This is the first publication |
|
|
|
Cenelec |
EN 60335-1:2002 Household and similar electrical appliances - Safety - Part 1: General requirements IEC 60335-1:2001 (Modified) |
20.10.2010 |
|
|
|
EN 60335-1:2002/A11:2004 |
20.10.2010 |
Note 3 |
|
|
|
EN 60335-1:2002/A1:2004 IEC 60335-1:2001/A1:2004 |
20.10.2010 |
Note 3 |
|
|
|
EN 60335-1:2002/A12:2006 |
20.10.2010 |
Note 3 |
|
|
|
EN 60335-1:2002/A13:2008 |
20.10.2010 |
Note 3 |
|
|
|
EN 60335-1:2002/A14:2010 |
20.10.2010 |
Note 3 |
|
|
|
EN 60335-1:2002/AC:2010 |
|
|
|
|
|
EN 60335-1:2002/A12:2006/AC:2007 |
|
|
|
|
|
EN 60335-1:2002/A1:2004/AC:2007 |
|
|
|
|
|
EN 60335-1:2002/AC:2009 |
|
|
|
|
|
Cenelec |
EN 60335-2-67:2009 Household and similar electrical appliances - Safety - Part 2-67: Particular requirements for floor treatment and floor cleaning machines for commercial use IEC 60335-2-67:2002 (Modified) + A1:2005 (Modified) |
18.12.2009 |
|
|
|
Cenelec |
EN 60335-2-68:2009 Household and similar electrical appliances - Safety - Part 2-68: Particular requirements for spray extraction machines for commercial use IEC 60335-2-68:2002 (Modified) + A1:2005 (Modified) + A2:2007 (Modified) |
18.12.2009 |
|
|
|
Cenelec |
EN 60335-2-69:2009 Household and similar electrical appliances - Safety - Part 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush, for commercial use IEC 60335-2-69:2002 (Modified) + A1:2004 (Modified) + A2:2007 (Modified) |
18.12.2009 |
|
|
|
Cenelec |
EN 60335-2-72:2009 Household and similar electrical appliances - Safety - Part 2-72: Particular requirements for automatic machines for floor treatment for commercial use IEC 60335-2-72:2002 (Modified) + A1:2005 (Modified) |
18.12.2009 |
|
|
|
Cenelec |
EN 60335-2-77:2010 Safety of household and similar appliances - Part 2-77: Particular requirements for pedestrian-controlled walk-behind electrically powered lawn mowers IEC 60335-2-77:2002 (Modified) |
8.4.2011 |
|
|
|
Cenelec |
EN 60335-2-79:2009 Household and similar electrical appliances - Safety - Part 2-79: Particular requirements for high pressure cleaners and steam cleaners IEC 60335-2-79:2002 (Modified) + A1:2004 (Modified) + A2:2007 (Modified) |
18.12.2009 |
|
|
|
Cenelec |
EN 60745-1:2009 Hand-held motor-operated electric tools - Safety - Part 1: General requirements IEC 60745-1:2006 (Modified) |
18.12.2009 |
|
|
|
EN 60745-1:2009/A11:2010 |
8.4.2011 |
Note 3 |
1.10.2013 |
|
|
EN 60745-1:2009/AC:2009 |
|
|
|
|
|
Cenelec |
EN 60745-2-1:2010 Hand-held motor-operated electric tools - Safety - Part 2-1: Particular requirements for drills and impact drills IEC 60745-2-1:2003 (Modified) + A1:2008 |
20.10.2010 |
|
|
|
Cenelec |
EN 60745-2-2:2010 Hand-held motor-operated electric tools - Safety - Part 2-2: Particular requirements for screwdrivers and impact wrenches IEC 60745-2-2:2003 (Modified) + A1:2008 |
20.10.2010 |
|
|
|
Cenelec |
EN 60745-2-3:2011 Hand-held motor-operated electric tools - Safety - Part 2-3: Particular requirements for grinders, polishers and disk-type sanders IEC 60745-2-3:2006 (Modified) + A1:2010 (Modified) |
This is the first publication |
|
|
|
Cenelec |
EN 60745-2-4:2009 Hand-held motor-operated electric tools - Safety - Part 2-4: Particular requirements for sanders and polishers other than disk type IEC 60745-2-4:2002 (Modified) + A1:2008 (Modified) |
26.5.2010 |
|
|
|
Cenelec |
EN 60745-2-5:2010 Hand-held motor-operated electric tools - Safety - Part 2-5: Particular requirements for circular saws IEC 60745-2-5:2010 (Modified) |
8.4.2011 |
|
|
|
Cenelec |
EN 60745-2-6:2010 Hand-held motor-operated electric tools - Safety - Part 2-6: Particular requirements for hammers IEC 60745-2-6:2003 (Modified) + A1:2006 + A2:2008 |
20.10.2010 |
|
|
|
Cenelec |
EN 60745-2-8:2009 Hand-held motor-operated electric tools - Safety - Part 2-8: Particular requirements for shears and nibblers IEC 60745-2-8:2003 (Modified) + A1:2008 |
18.12.2009 |
|
|
|
Cenelec |
EN 60745-2-9:2009 Hand-held motor-operated electric tools - Safety - Part 2-9: Particular requirements for tappers IEC 60745-2-9:2003 (Modified) + A1:2008 |
18.12.2009 |
|
|
|
Cenelec |
EN 60745-2-11:2010 Hand-held motor-operated electric tools - Safety - Part 2-11: Particular requirements for reciprocating saws (jig and sabre saws) IEC 60745-2-11:2003 (Modified) + A1:2008 |
20.10.2010 |
|
|
|
Cenelec |
EN 60745-2-12:2009 Hand-held motor-operated electric tools - Safety - Part 2-12: Particular requirements for concrete vibrators IEC 60745-2-12:2003 (Modified) + A1:2008 |
18.12.2009 |
|
|
|
Cenelec |
EN 60745-2-13:2009 Hand-held motor-operated electric tools - Safety - Part 2-13: Particular requirements for chain saws IEC 60745-2-13:2006 (Modified) |
18.12.2009 |
|
|
|
EN 60745-2-13:2009/A1:2010 IEC 60745-2-13:2006/A1:2009 |
20.7.2011 |
Note 3 |
1.12.2013 |
|
|
Cenelec |
EN 60745-2-14:2009 Hand-held motor-operated electric tools - Safety - Part 2-14: Particular requirements for planers IEC 60745-2-14:2003 (Modified) + A1:2006 (Modified) |
18.12.2009 |
|
|
|
EN 60745-2-14:2009/A2:2010 IEC 60745-2-14:2003/A2:2010 |
8.4.2011 |
Note 3 |
1.6.2013 |
|
|
Cenelec |
EN 60745-2-15:2009 Hand-held motor-operated electric tools - Safety - Part 2-15: Particular requirements for hedge trimmers IEC 60745-2-15:2006 (Modified) |
18.12.2009 |
|
|
|
Cenelec |
EN 60745-2-16:2010 Hand-held motor-operated electric tools - Safety - Part 2-16: Particular requirements for tackers IEC 60745-2-16:2008 (Modified) |
8.4.2011 |
|
|
|
Cenelec |
EN 60745-2-17:2010 Hand-held motor-operated electric tools - Safety - Part 2-17: Particular requirements for routers and trimmers IEC 60745-2-17:2010 (Modified) |
8.4.2011 |
|
|
|
Cenelec |
EN 60745-2-18:2009 Hand-held motor-operated electric tools - Safety - Part 2-18: Particular requirements for strapping tools IEC 60745-2-18:2003 (Modified) + A1:2008 |
18.12.2009 |
|
|
|
Cenelec |
EN 60745-2-19:2009 Hand-held motor-operated electric tools - Safety - Part 2-19: Particular requirements for jointers IEC 60745-2-19:2005 (Modified) |
18.12.2009 |
|
|
|
EN 60745-2-19:2009/A1:2010 IEC 60745-2-19:2005/A1:2010 |
8.4.2011 |
Note 3 |
1.6.2013 |
|
|
Cenelec |
EN 60745-2-20:2009 Hand-held motor-operated electric tools - Safety - Part 2-20: Particular requirements for band saws IEC 60745-2-20:2003 (Modified) + A1:2008 |
18.12.2009 |
|
|
|
Cenelec |
EN 60745-2-21:2009 Hand-held motor-operated electric tools - Safety - Part 2-21: Particular requirements for drain cleaners IEC 60745-2-21:2002 (Modified) |
18.12.2009 |
|
|
|
EN 60745-2-21:2009/A1:2010 IEC 60745-2-21:2002/A1:2008 |
20.7.2011 |
Note 3 |
1.12.2013 |
|
|
Cenelec |
EN 60745-2-22:2011 Hand-held motor-operated electric tools - Safety - Part 2-22: Particular requirements for cut-off machines IEC 60745-2-22:2011 (Modified) |
This is the first publication |
|
|
|
Cenelec |
EN 61029-1:2009 Safety of transportable motor-operated electric tools - Part 1: General requirements IEC 61029-1:1990 (Modified) |
18.12.2009 |
|
|
|
EN 61029-1:2009/A11:2010 |
8.4.2011 |
Note 3 |
1.11.2013 |
|
|
EN 61029-1:2009/AC:2009 |
|
|
|
|
|
Cenelec |
EN 61029-2-1:2010 Safety of transportable motor-operated electric tools - Part 2-1: Particular requirements for circular saw benches IEC 61029-2-1:1993 (Modified) + A1:1999 + A2:2001 |
20.10.2010 |
|
|
|
Cenelec |
EN 61029-2-3:2011 Safety of transportable motor-operated electric tools - Part 2-3: Particular requirements for planers and thicknessers IEC 61029-2-3:1993 (Modified) + A1:2001 |
This is the first publication |
|
|
|
Cenelec |
EN 61029-2-4:2011 Safety of transportable motor-operated electric tools - Part 2-4: Particular requirements for bench grinders IEC 61029-2-4:1993 (Modified) + A1:2001 (Modified) |
This is the first publication |
|
|
|
Cenelec |
EN 61029-2-6:2010 Safety of transportable motor-operated electric tools - Part 2-6: Particular requirements for diamond drills with water supply IEC 61029-2-6:1993 (Modified) |
20.10.2010 |
|
|
|
Cenelec |
EN 61029-2-8:2010 Safety of transportable motor-operated electric tools - Part 2-8: Particular requirements for single spindle vertical moulders IEC 61029-2-8:1995 (Modified) + A1:1999 + A2:2001 |
20.10.2010 |
|
|
|
Cenelec |
EN 61029-2-9:2009 Safety of transportable motor-operated electric tools - Part 2-9: Particular requirements for mitre saws IEC 61029-2-9:1995 (Modified) |
18.12.2009 |
|
|
|
Cenelec |
EN 61029-2-10:2010 Safety of transportable motor-operated electric tools - Part 2-10: Particular requirements for cutting-off grinders IEC 61029-2-10:1998 (Modified) |
20.10.2010 |
|
|
|
Cenelec |
EN 61029-2-11:2009 Safety of transportable motor-operated electric tools - Part 2-11: Particular requirements for combined mitre and bench saws IEC 61029-2-11:2001 (Modified) |
18.12.2009 |
|
|
|
Cenelec |
EN 61029-2-12:2011 Safety of transportable motor-operated electric tools - Part 2-12: Particular requirements for threading machines IEC 61029-2-12:2010 (Modified) |
This is the first publication |
|
|
|
Cenelec |
EN 61310-1:2008 Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals IEC 61310-1:2007 |
18.12.2009 |
|
|
|
Cenelec |
EN 61310-2:2008 Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking IEC 61310-2:2007 |
18.12.2009 |
|
|
|
Cenelec |
EN 61310-3:2008 Safety of machinery - Indication, marking and actuation - Part 3: Requirements for the location and operation of actuators IEC 61310-3:2007 |
18.12.2009 |
|
|
|
Cenelec |
EN 61496-1:2004 Safety of machinery - Electro-sensitive protective equipment - Part 1: General requirements and tests IEC 61496-1:2004 (Modified) |
26.5.2010 |
|
|
|
EN 61496-1:2004/A1:2008 IEC 61496-1:2004/A1:2007 |
26.5.2010 |
Note 3 |
Date expired (1.6.2011) |
|
|
EN 61496-1:2004/AC:2010 |
|
|
|
|
|
Cenelec |
EN 61800-5-2:2007 Adjustable speed electrical power drive systems - Part 5-2: Safety requirements - Functional IEC 61800-5-2:2007 |
18.12.2009 |
|
|
|
Cenelec |
EN 62061:2005 Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems IEC 62061:2005 |
26.5.2010 |
|
|
|
EN 62061:2005/AC:2010 |
|
|
|
|
|
Note 1: |
Generally the date of cessation of presumption of conformity will be the date of withdrawal (‘dow’), set by the European Standardisation Organisation, but attention of users of these standards is drawn to the fact that in certain exceptional cases this can be otherwise. |
|
Note 2.1: |
The new (or amended) standard has the same scope as the superseded standard. On the date stated, the superseded standard ceases to give presumption of conformity with the essential requirements of the directive. |
|
Note 2.2: |
The new standard has a broader scope than the superseded standard. On the date stated the superseded standard ceases to give presumption of conformity with the essential requirements of the directive. |
|
Note 2.3: |
The new standard has a narrower scope than the superseded standard. On the date stated the (partially) superseded standard ceases to give presumption of conformity with the essential requirements of the directive for those products that fall within the scope of the new standard. Presumption of conformity with the essential requirements of the directive for products that still fall within the scope of the (partially) superseded standard, but that do not fall within the scope of the new standard, is unaffected. |
|
Note 3: |
In case of amendments, the referenced standard is EN CCCCC:YYYY, its previous amendments, if any, and the new, quoted amendment. The superseded standard (column 3) therefore consists of EN CCCCC:YYYY and its previous amendments, if any, but without the new quoted amendment. On the date stated, the superseded standard ceases to give presumption of conformity with the essential requirements of the directive. |
NOTE:
|
— |
Any information concerning the availability of the standards can be obtained either from the European Standardisation Organisations or from the national standardisation bodies of which the list is annexed to the Directive 98/34/EC of the European Parliament and Council (2) amended by the Directive 98/48/EC (3). |
|
— |
Harmonised standards are adopted by the European Standardisation Organisations in English (CEN and Cenelec also publish in French and German). Subsequently, the titles of the harmonised standards are translated into all other required official languages of the European Union by the National Standards Bodies. The European Commission is not responsible for the correctness of the titles which have been presented for publication in the Official Journal. |
|
— |
Publication of the references in the Official Journal of the European Union does not imply that the standards are available in all the Community languages. |
|
— |
This list replaces all the previous lists published in the Official Journal of the European Union. The Commission ensures the updating of this list. |
|
— |
More information about harmonised standards on the Internet at http://ec.europa.eu/enterprise/policies/european-standards/harmonised-standards/index_en.htm |
(1) ESO: European Standards Organisation:
|
— |
CEN: Avenue Marnix 17, 1000 Bruxelles/Brussel, BELGIQUE/BELGIË, Tel. +32 25500811; fax +32 25500819 (http://www.cen.eu) |
|
— |
Cenelec: Avenue Marnix 17, 1000 Bruxelles/Brussel, BELGIQUE/BELGIË, Tel. +32 25196871; fax +32 25196919 (http://www.cenelec.eu) |
|
— |
ETSI: 650 route des Lucioles, 06921 Sophia Antipolis, FRANCE, Tel. +33 492944200; fax +33 493654716, (http://www.etsi.eu) |
(2) OJ L 204, 21.7.1998, p. 37.
(3) OJ L 217, 5.8.1998, p. 18.
|
18.11.2011 |
EN |
Official Journal of the European Union |
C 338/56 |
Commission communication in the framework of the implementation of Directive 94/9/EC of the European Parliament and of the Council of 23 March 1994 on the approximation of the laws of the Member States concerning equipment and protective systems intended for use in potentially explosive atmospheres
(Text with EEA relevance)
(Publication of titles and references of harmonised standards under the directive)
2011/C 338/02
|
ESO (1) |
Reference and title of the harmonised standard (and reference document) |
First publication OJ |
Reference of superseded standard |
Date of cessation of presumption of conformity of superseded standard Note 1 |
|
(1) |
(2) |
(3) |
(4) |
(5) |
|
CEN |
EN 1010-1:2004+A1:2010 Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 1: Common requirements |
8.6.2011 |
EN 1010-1:2004 Note 2.1 |
Date expired (8.6.2011) |
|
CEN |
EN 1010-2:2006+A1:2010 Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 2: Printing and varnishing machines including pre-press machinery |
4.2.2011 |
EN 1010-2:2006 Note 2.1 |
Date expired (28.2.2011) |
|
CEN |
EN 1127-1:2011 Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology |
This is the first publication |
EN 1127-1:2007 Note 2.1 |
31.7.2014 |
|
CEN |
EN 1127-2:2002+A1:2008 Explosive atmospheres - Explosion prevention and protection - Part 2: Basic concepts and methodology for mining |
20.8.2008 |
EN 1127-2:2002 Note 2.1 |
Date expired (28.12.2009) |
|
CEN |
EN 1710:2005+A1:2008 Equipment and components intended for use in potentially explosive atmospheres in underground mines |
20.8.2008 |
EN 1710:2005 Note 2.1 |
Date expired (28.12.2009) |
|
EN 1710:2005+A1:2008/AC:2010 |
|
|
|
|
|
CEN |
EN 1755:2000+A1:2009 Safety of industrial trucks - Operation in potentially explosive atmospheres - Use in flammable gas, vapour, mist and dust |
16.4.2010 |
EN 1755:2000 Note 2.1 |
Date expired (16.4.2010) |
|
CEN |
EN 1834-1:2000 Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 1: Group II engines for use in flammable gas and vapour atmospheres |
21.7.2001 |
|
|
|
CEN |
EN 1834-2:2000 Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 2: Group I engines for use in underground workings susceptible to firedamp and/or combustible dust |
21.7.2001 |
|
|
|
CEN |
EN 1834-3:2000 Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 3: Group II engines for use in flammable dust atmospheres |
21.7.2001 |
|
|
|
CEN |
EN 1839:2003 Determination of explosion limits of gases and vapours |
12.8.2004 |
|
|
|
CEN |
EN 12581:2005+A1:2010 Coating plants - Machinery for dip coating and electrodeposition of organic liquid coating material - Safety requirements |
17.9.2010 |
EN 12581:2005 Note 2.1 |
Date expired (31.12.2010) |
|
CEN |
EN 12621:2006+A1:2010 Machinery for the supply and circulation of coating materials under pressure - Safety requirements |
17.9.2010 |
EN 12621:2006 Note 2.1 |
Date expired (31.12.2010) |
|
CEN |
EN 12757-1:2005+A1:2010 Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing |
17.9.2010 |
EN 12757-1:2005 Note 2.1 |
Date expired (31.12.2010) |
|
CEN |
EN 13012:2001 Petrol filling stations - Construction and performance of automatic nozzles for use on fuel dispensers |
22.1.2002 |
|
|
|
CEN |
EN 13160-1:2003 Leak detection systems - Part 1: General principles |
14.8.2003 |
|
|
|
CEN |
EN 13237:2003 Potentially explosive atmospheres - Terms and definitions for equipment and protective systems intended for use in potentially explosive atmospheres |
14.8.2003 |
|
|
|
CEN |
EN 13463-1:2009 Non-electrical equipment for use in potentially explosive atmospheres - Part 1: Basic method and requirements |
16.4.2010 |
EN 13463-1:2001 Note 2.1 |
Date expired (31.12.2010) |
|
CEN |
EN 13463-2:2004 Non-electrical equipment for use in potentially explosive atmospheres - Part 2: Protection by flow restricting enclosure ‘fr’ |
30.11.2005 |
|
|
|
CEN |
EN 13463-3:2005 Non-electrical equipment for use in potentially explosive atmospheres - Part 3: Protection by flameproof enclosure ‘d’ |
30.11.2005 |
|
|
|
CEN |
EN 13463-5:2011 Non-electrical equipment intended for use in potentially explosive atmospheres - Part 5: Protection by constructional safety ‘c’ |
This is the first publication |
EN 13463-5:2003 Note 2.1 |
31.7.2014 |
|
CEN |
EN 13463-6:2005 Non-electrical equipment for use in potentially explosive atmospheres - Part 6: Protection by control of ignition source ‘b’ |
30.11.2005 |
|
|
|
CEN |
EN 13463-8:2003 Non-electrical equipment for potentially explosive atmospheres - Part 8: Protection by liquid immersion ‘k’ |
12.8.2004 |
|
|
|
CEN |
EN 13616:2004 Overfill prevention devices for static tanks for liquid petroleum fuels |
9.3.2006 |
|
|
|
EN 13616:2004/AC:2006 |
|
|
|
|
|
CEN |
EN 13617-1:2004+A1:2009 Petrol filling stations - Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units |
7.7.2010 |
EN 13617-1:2004 Note 2.1 |
Date expired (31.12.2010) |
|
CEN |
EN 13617-2:2004 Petrol filling stations - Part 2: Safety requirements for construction and performance of safe breaks for use on metering pumps and dispensers |
30.11.2005 |
|
|
|
CEN |
EN 13617-3:2004 Petrol filling stations - Part 3: Safety requirements for construction and performance of shear valves |
30.11.2005 |
|
|
|
CEN |
EN 13760:2003 Automotive LPG filling system for light and heavy duty vehicles - Nozzle, test requirements and dimensions |
24.1.2004 |
|
|
|
CEN |
EN 13821:2002 Potentially explosive atmospheres - Explosion prevention and protection - Determination of minimum ignition energy of dust/air mixtures |
20.5.2003 |
|
|
|
CEN |
EN 14034-1:2004+A1:2011 Determination of explosion characteristics of dust clouds - Part 1: Determination of the maximum explosion pressure pmax of dust clouds |
8.6.2011 |
EN 14034-1:2004 Note 2.1 |
Date expired (31.7.2011) |
|
CEN |
EN 14034-2:2006+A1:2011 Determination of explosion characteristics of dust clouds - Part 2: Determination of the maximum rate of explosion pressure rise (dp/dt)max of dust clouds |
8.6.2011 |
EN 14034-2:2006 Note 2.1 |
Date expired (31.7.2011) |
|
CEN |
EN 14034-3:2006+A1:2011 Determination of explosion characteristics of dust clouds - Part 3: Determination of the lower explosion limit LEL of dust clouds |
8.6.2011 |
EN 14034-3:2006 Note 2.1 |
Date expired (31.7.2011) |
|
CEN |
EN 14034-4:2004+A1:2011 Determination of explosion characteristics of dust clouds - Part 4: Determination of the limiting oxygen concentration LOC of dust clouds |
8.6.2011 |
EN 14034-4:2004 Note 2.1 |
Date expired (31.7.2011) |
|
CEN |
EN 14373:2005 Explosion suppression systems |
9.3.2006 |
|
|
|
CEN |
EN 14460:2006 Explosion resistant equipment |
15.12.2006 |
|
|
|
CEN |
EN 14491:2006 Dust explosion venting protective systems |
20.7.2006 |
|
|
|
EN 14491:2006/AC:2008 |
|
|
|
|
|
CEN |
EN 14492-1:2006+A1:2009 Cranes - Power driven winches and hoists - Part 1: Power driven winches |
16.4.2010 |
EN 14492-1:2006 Note 2.1 |
Date expired (30.4.2010) |
|
EN 14492-1:2006+A1:2009/AC:2010 |
|
|
|
|
|
CEN |
EN 14492-2:2006+A1:2009 Cranes - Power driven winches and hoists - Part 2: Power driven hoists |
16.4.2010 |
EN 14492-2:2006 Note 2.1 |
Date expired (16.4.2010) |
|
EN 14492-2:2006+A1:2009/AC:2010 |
|
|
|
|
|
CEN |
EN 14522:2005 Determination of the auto ignition temperature of gases and vapours |
30.11.2005 |
|
|
|
CEN |
EN 14591-1:2004 Explosion prevention and protection in underground mines - Protective systems - Part 1: 2-bar explosion proof ventilation structure |
9.3.2006 |
|
|
|
EN 14591-1:2004/AC:2006 |
|
|
|
|
|
CEN |
EN 14591-2:2007 Explosion prevention and protection in underground mines - Protective systems - Part 2: Passive water trough barriers |
12.12.2007 |
|
|
|
EN 14591-2:2007/AC:2008 |
|
|
|
|
|
CEN |
EN 14591-4:2007 Explosion prevention and protection in underground mines - Protective systems - Part 4: Automatic extinguishing systems for road headers |
12.12.2007 |
|
|
|
EN 14591-4:2007/AC:2008 |
|
|
|
|
|
CEN |
EN 14677:2008 Safety of machinery - Secondary steelmaking - Machinery and equipment for treatment of liquid steel |
20.8.2008 |
|
|
|
CEN |
EN 14678-1:2006+A1:2009 LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 1: Dispensers |
16.4.2010 |
EN 14678-1:2006 Note 2.1 |
Date expired (16.4.2010) |
|
CEN |
EN 14681:2006+A1:2010 Safety of machinery - Safety requirements for machinery and equipment for production of steel by electric arc furnaces |
8.6.2011 |
EN 14681:2006 Note 2.1 |
Date expired (8.6.2011) |
|
CEN |
EN 14756:2006 Determination of the limiting oxygen concentration (LOC) for flammable gases and vapours |
12.12.2007 |
|
|
|
CEN |
EN 14797:2006 Explosion venting devices |
12.12.2007 |
|
|
|
CEN |
EN 14973:2006+A1:2008 Conveyor belts for use in underground installations - Electrical and flammability safety requirements |
7.7.2010 |
EN 14973:2006 Note 2.1 |
Date expired (31.12.2010) |
|
CEN |
EN 14983:2007 Explosion prevention and protection in underground mines - Equipment and protective systems for firedamp drainage |
12.12.2007 |
|
|
|
CEN |
EN 14986:2007 Design of fans working in potentially explosive atmospheres |
12.12.2007 |
|
|
|
CEN |
EN 14994:2007 Gas explosion venting protective systems |
12.12.2007 |
|
|
|
CEN |
EN 15089:2009 Explosion isolation systems |
16.4.2010 |
|
|
|
CEN |
EN 15188:2007 Determination of the spontaneous ignition behaviour of dust accumulations |
12.12.2007 |
|
|
|
CEN |
EN 15198:2007 Methodology for the risk assessment of non-electrical equipment and components for intended use in potentially explosive atmospheres |
12.12.2007 |
|
|
|
CEN |
EN 15233:2007 Methodology for functional safety assessment of protective systems for potentially explosive atmospheres |
12.12.2007 |
|
|
|
CEN |
EN 15268:2008 Petrol filling stations - Safety requirements for the construction of submersible pump assemblies |
27.1.2009 |
|
|
|
CEN |
EN 15794:2009 Determination of explosion points of flammable liquids |
16.4.2010 |
|
|
|
CEN |
EN 15967:2011 Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapours |
This is the first publication |
EN 13673-2:2005 EN 13673-1:2003 Note 2.1 |
29.2.2012 |
|
CEN |
EN 16009:2011 Flameless explosion venting devices |
This is the first publication |
|
|
|
CEN |
EN 16020:2011 Explosion diverters |
This is the first publication |
|
|
|
CEN |
EN ISO 16852:2010 Flame arresters - Performance requirements, test methods and limits for use (ISO 16852:2008, including Cor 1:2008 and Cor 2:2009) |
17.9.2010 |
EN 12874:2001 Note 2.1 |
Date expired (31.12.2010) |
|
Cenelec |
EN 50050:2006 Electrical apparatus for potentially explosive atmospheres - Electrostatic hand-held spraying equipment |
20.8.2008 |
|
|
|
Cenelec |
EN 50104:2010 Electrical apparatus for the detection and measurement of oxygen - Performance requirements and test methods |
4.2.2011 |
EN 50104:2002 and its amendment Note 2.1 |
1.6.2013 |
|
Cenelec |
EN 50176:2009 Stationary electrostatic application equipment for ignitable liquid coating material - Safety requirements |
16.4.2010 |
|
|
|
Cenelec |
EN 50177:2009 Stationary electrostatic application equipment for ignitable coating powders - Safety requirements |
16.4.2010 |
|
|
|
Cenelec |
EN 50223:2010 Stationary electrostatic application equipment for ignitable flock material - Safety requirements |
17.9.2010 |
|
|
|
Cenelec |
EN 50241-1:1999 Specification for open path apparatus for the detection of combustible or toxic gases and vapours – Part 1: General requirements and test methods |
6.11.1999 |
|
|
|
EN 50241-1:1999/A1:2004 |
12.8.2004 |
Note 3 |
Date expired (12.8.2004) |
|
|
Cenelec |
EN 50241-2:1999 Specification for open path apparatus for the detection of combustible or toxic gases and vapours – Part 2: Performance requirements for apparatus for the detection of combustible gases |
6.11.1999 |
|
|
|
Cenelec |
EN 50271:2010 Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen - Requirements and tests for apparatus using software and/or digital technologies |
4.2.2011 |
|
|
|
Cenelec |
EN 50281-2-1:1998 Electrical apparatus for use in the presence of combustible dust – Part 2-1: Test methods - Methods for determining the minimum ignition temperatures of dust |
6.11.1999 |
|
|
|
EN 50281-2-1:1998/AC:1999 |
|
|
|
|
|
Cenelec |
EN 50303:2000 Group I, Category M1 equipment intended to remain functional in atmospheres endangered by firedamp and/or coal dust |
16.2.2001 |
|
|
|
Cenelec |
EN 50381:2004 Transportable ventilated rooms with or without an internal source of release |
9.3.2006 |
|
|
|
EN 50381:2004/AC:2005 |
|
|
|
|
|
Cenelec |
EN 50495:2010 Safety devices required for the safe functioning of equipment with respect to explosion risks |
17.9.2010 |
|
|
|
Cenelec |
EN 60079-0:2009 Explosive atmospheres – Part 0: Equipment - General requirements IEC 60079-0:2007 |
16.4.2010 |
EN 60079-0:2006 + EN 61241-0:2006 Note 2.1 |
1.6.2012 |
|
Cenelec |
EN 60079-1:2007 Explosive atmospheres – Part 1: Equipment protection by flameproof enclosures ‘d’ IEC 60079-1:2007 |
20.8.2008 |
EN 60079-1:2004 Note 2.1 |
Date expired (1.7.2010) |
|
Cenelec |
EN 60079-2:2007 Explosive atmospheres – Part 2: Equipment protection by pressurized enclosure ‘p’ IEC 60079-2:2007 |
20.8.2008 |
EN 60079-2:2004 Note 2.1 |
Date expired (1.11.2010) |
|
Cenelec |
EN 60079-5:2007 Explosive atmospheres – Part 5: Equipment protection by powder filling ‘q’ IEC 60079-5:2007 |
20.8.2008 |
EN 50017:1998 Note 2.1 |
Date expired (1.11.2010) |
|
Cenelec |
EN 60079-6:2007 Explosive atmospheres – Part 6: Equipment protection by oil immersion ‘o’ IEC 60079-6:2007 |
20.8.2008 |
EN 50015:1998 Note 2.1 |
Date expired (1.5.2010) |
|
Cenelec |
EN 60079-7:2007 Explosive atmospheres – Part 7: Equipment protection by increased safety ‘e’ IEC 60079-7:2006 |
11.4.2008 |
EN 60079-7:2003 Note 2.1 |
Date expired (1.10.2009) |
|
Cenelec |
EN 60079-11:2007 Explosive atmospheres – Part 11: Equipment protection by intrinsic safety ‘i’ IEC 60079-11:2006 |
11.4.2008 |
EN 50020:2002 Note 2.1 |
Date expired (1.10.2009) |
|
Cenelec |
EN 60079-15:2010 Explosive atmospheres – Part 15: Equipment protection by type of protection ‘n’ IEC 60079-15:2010 |
8.6.2011 |
EN 60079-15:2005 Note 2.1 |
1.5.2013 |
|
Cenelec |
EN 60079-18:2009 Explosive atmospheres – Part 18: Equipment protection by encapsulation ‘m’ IEC 60079-18:2009 |
7.7.2010 |
EN 60079-18:2004 + EN 61241-18:2004 Note 2.1 |
1.10.2012 |
|
Cenelec |
EN 60079-20-1:2010 Explosive atmospheres – Part 20-1: Material characteristics for gas and vapour classification - Test methods and data IEC 60079-20-1:2010 |
17.9.2010 |
|
|
|
Cenelec |
EN 60079-25:2010 Explosive atmospheres – Part 25: Intrinsically safe electrical systems IEC 60079-25:2010 |
8.6.2011 |
EN 60079-25:2004 Note 2.1 |
1.10.2013 |
|
Cenelec |
EN 60079-26:2007 Explosive atmospheres – Part 26: Equipment with equipment protection level (EPL) Ga IEC 60079-26:2006 |
20.8.2008 |
|
|
|
Cenelec |
EN 60079-27:2008 Explosive atmospheres – Part 27: Fieldbus intrinsically safe concept (FISCO) IEC 60079-27:2008 |
16.4.2010 |
EN 60079-27:2006 Note 2.1 |
Date expired (1.4.2011) |
|
Cenelec |
EN 60079-28:2007 Explosive atmospheres – Part 28: Protection of equipment and transmission systems using optical radiation IEC 60079-28:2006 |
11.4.2008 |
|
|
|
Cenelec |
EN 60079-29-1:2007 Explosive atmospheres – Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases IEC 60079-29-1:2007 (Modified) |
20.8.2008 |
EN 61779-1:2000 + A11:2004 + EN 61779-2:2000 + EN 61779-3:2000 + EN 61779-4:2000 + EN 61779-5:2000 Note 2.1 |
Date expired (1.11.2010) |
|
Cenelec |
EN 60079-29-4:2010 Explosive atmospheres – Part 29-4: Gas detectors - Performance requirements of open path detectors for flammable gases IEC 60079-29-4:2009 (Modified) |
8.6.2011 |
EN 50241-1:1999 and its amendment + EN 50241-2:1999 Note 2.1 |
1.4.2013 |
|
Cenelec |
EN 60079-30-1:2007 Explosive atmospheres – Part 30-1: Electrical resistance trace heating - General and testing requirements IEC 60079-30-1:2007 |
20.8.2008 |
|
|
|
Cenelec |
EN 60079-31:2009 Explosive atmospheres – Part 31: Equipment dust ignition protection by enclosure ‘t’ IEC 60079-31:2008 |
7.7.2010 |
EN 61241-1:2004 Note 2.1 |
1.10.2012 |
|
Cenelec |
EN 60079-35-1:2011 Explosive atmospheres – Part 35-1: Caplights for use in mines susceptible to firedamp - General requirements - Construction and testing in relation to the risk of explosion IEC 60079-35-1:2011 |
This is the first publication |
EN 62013-1:2006 Note 2.1 |
30.6.2014 |
|
EN 60079-35-1:2011/AC:2011 |
|
|
|
|
|
Cenelec |
EN 61241-4:2006 Electrical apparatus for use in the presence of combustible dust – Part 4: Type of protection ‘pD’ IEC 61241-4:2001 |
20.8.2008 |
|
|
|
Cenelec |
EN 61241-11:2006 Electrical apparatus for use in the presence of combustible dust – Part 11: Protection by intrinsic safety ‘iD’ IEC 61241-11:2005 |
11.4.2008 |
|
|
|
Cenelec |
EN 62013-1:2006 Caplights for use in mines susceptible to firedamp – Part 1: General requirements - Construction and testing in relation to the risk of explosion IEC 62013-1:2005 |
20.8.2008 |
EN 62013-1:2002 Note 2.1 |
Date expired (1.2.2009) |
|
Cenelec |
EN ISO/IEC 80079-34:2011 Explosive atmospheres – Part 34: Application of quality systems for equipment manufacture ISO/IEC 80079-34:2011 (Modified) |
This is the first publication |
EN 13980:2002 Note 2.1 |
25.5.2014 |
|
Note 1: |
Generally the date of cessation of presumption of conformity will be the date of withdrawal (‘dow’), set by the European Standardisation Organisation, but attention of users of these standards is drawn to the fact that in certain exceptional cases this can be otherwise. |
|
Note 2.1: |
The new (or amended) standard has the same scope as the superseded standard. On the date stated, the superseded standard ceases to give presumption of conformity with the essential requirements of the directive. |
|
Note 2.2: |
The new standard has a broader scope than the superseded standard. On the date stated the superseded standard ceases to give presumption of conformity with the essential requirements of the directive. |
|
Note 2.3: |
The new standard has a narrower scope than the superseded standard. On the date stated the (partially) superseded standard ceases to give presumption of conformity with the essential requirements of the directive for those products that fall within the scope of the new standard. Presumption of conformity with the essential requirements of the directive for products that still fall within the scope of the (partially) superseded standard, but that do not fall within the scope of the new standard, is unaffected. |
|
Note 3: |
In case of amendments, the referenced standard is EN CCCCC:YYYY, its previous amendments, if any, and the new, quoted amendment. The superseded standard (column 3) therefore consists of EN CCCCC:YYYY and its previous amendments, if any, but without the new quoted amendment. On the date stated, the superseded standard ceases to give presumption of conformity with the essential requirements of the directive. |
NOTE:
|
— |
Any information concerning the availability of the standards can be obtained either from the European Standardisation Organisations or from the national standardisation bodies of which the list is annexed to the Directive 98/34/EC of the European Parliament and Council (2) amended by the Directive 98/48/EC (3). |
|
— |
Harmonised standards are adopted by the European Standardisation Organisations in English (CEN and Cenelec also publish in French and German). Subsequently, the titles of the harmonised standards are translated into all other required official languages of the European Union by the National Standards Bodies. The European Commission is not responsible for the correctness of the titles which have been presented for publication in the Official Journal. |
|
— |
Publication of the references in the Official Journal of the European Union does not imply that the standards are available in all the Community languages. |
|
— |
This list replaces all the previous lists published in the Official Journal of the European Union. The Commission ensures the updating of this list. |
|
— |
More information about harmonised standards on the Internet at http://ec.europa.eu/enterprise/policies/european-standards/harmonised-standards/index_en.htm |
(1) ESO: European Standards Organisation:
|
— |
CEN: Avenue Marnix 17, 1000 Bruxelles/Brussel, BELGIQUE/BELGIË, Tel. +32 25500811; fax +32 25500819 (http://www.cen.eu) |
|
— |
Cenelec: Avenue Marnix 17, 1000 Bruxelles/Brussel, BELGIQUE/BELGIË, Tel. +32 25196871; fax +32 25196919 (http://www.cenelec.eu) |
|
— |
ETSI: 650 route des Lucioles, 06921 Sophia Antipolis, FRANCE, Tel. +33 492944200; fax +33 493654716, (http://www.etsi.eu) |
(2) OJ L 204, 21.7.1998, p. 37.
(3) OJ L 217, 5.8.1998, p. 18.
NOTICES FROM MEMBER STATES
|
18.11.2011 |
EN |
Official Journal of the European Union |
C 338/65 |
Information communicated by Member States regarding State aid granted under Commission Regulation (EC) No 800/2008 declaring certain categories of aid compatible with the common market in application of Articles 87 and 88 of the Treaty (General Block Exemption Regulation)
(Text with EEA relevance)
2011/C 338/03
|
Reference number of the State Aid |
SA.27541 (X 88/09) |
||||||||||
|
Member State |
Belgium |
||||||||||
|
Member State reference number |
BE |
||||||||||
|
Name of the Region (NUTS) |
REGION WALLONNE Mixed |
||||||||||
|
Granting authority |
|
||||||||||
|
Title of the aid measure |
Incitants régionaux en faveur des petites et moyennes entreprises |
||||||||||
|
National legal basis (Reference to the relevant national official publication) |
|
||||||||||
|
Type of measure |
Scheme |
||||||||||
|
Amendment of an existing aid measure |
Modification N 16a/2003 Modification XR 81/2007 Modification N 16b/2003 |
||||||||||
|
Duration |
31.12.2008-31.12.2013 |
||||||||||
|
Economic sector(s) concerned |
All economic sectors eligible to receive aid |
||||||||||
|
Type of beneficiary |
SME |
||||||||||
|
Annual overall amount of the budget planned under the scheme |
EUR 135,00 (in millions) |
||||||||||
|
For guarantees |
— |
||||||||||
|
Aid Instrument (Article 5) |
Direct grant, Other. Please specify. — Aides aux services de conseil |
||||||||||
|
Reference to the Commission Decision |
— |
||||||||||
|
If co-financed by Community funds |
— |
||||||||||
|
Objectives |
Maximum aid intensity in % or Maximum aid amount in national currency |
SME-bonuses in % |
|||||||||
|
SME investment and employment aid (Art.15) |
— |
— |
|||||||||
|
Aid for consultancy in favour of SMEs (Art. 26) |
— |
— |
|||||||||
Web link to the full text of the aid measure:
|
|
http://wallex.wallonie.be/index.php?doc=3772&rev=3101-3436 |
|
|
http://wallex.wallonie.be/index.php?doc=3834&rev=3163-3436 |
|
18.11.2011 |
EN |
Official Journal of the European Union |
C 338/67 |
Information communicated by Member States regarding State aid granted under Commission Regulation (EC) No 800/2008 declaring certain categories of aid compatible with the common market in application of Articles 87 and 88 of the Treaty (General Block Exemption Regulation)
(Text with EEA relevance)
2011/C 338/04
|
Reference number of the State Aid |
SA.33644 (11/X) |
|||
|
Member State |
Germany |
|||
|
Member State reference number |
— |
|||
|
Name of the Region (NUTS) |
DEUTSCHLAND Article 107(3)(a), Article 107(3)(c), Non-assisted areas, Mixed |
|||
|
Granting authority |
siehe Dokument „Bewilligungsbehörden“ |
|||
|
Title of the aid measure |
|
|||
|
National legal basis (Reference to the relevant national official publication) |
Bundesanzeiger 134 vom 6. September 2011, Seite 3109 |
|||
|
Type of measure |
Scheme |
|||
|
Amendment of an existing aid measure |
— |
|||
|
Duration |
1.9.2011-31.12.2014 |
|||
|
Economic sector(s) concerned |
All economic sectors eligible to receive aid |
|||
|
Type of beneficiary |
SME,large enterprise |
|||
|
Annual overall amount of the budget planned under the scheme |
EUR 2 236,40 (in millions) |
|||
|
For guarantees |
— |
|||
|
Aid Instrument (Article 5) |
Direct grant |
|||
|
Reference to the Commission Decision |
— |
|||
|
If co-financed by Community funds |
— |
|||
|
Objectives |
Maximum aid intensity in % or Maximum aid amount in national currency |
SME-bonuses in % |
||
|
Experimental development (Art. 31(2)(c)) |
25 % |
20 % |
||
|
Aid for technical feasibility studies (Art. 32) |
75 % |
— |
||
|
Fundamental research (Art. 31(2)(a)) |
100 % |
— |
||
|
Industrial research (Art. 31(2)(b)) |
50 % |
20 % |
||
Web link to the full text of the aid measure:
|
|
http://www.bmwi.de/BMWi/Navigation/energie,did=427698.html |
|
|
http://www.bmwi.de/BMWi/Redaktion/PDF/B/bekanntmachung-6-energieforschungsprogramm,property=pdf,bereich=bmwi,sprache=de,rwb=true.pdf |
|
Reference number of the State Aid |
SA.33658 (11/X) |
||||
|
Member State |
Spain |
||||
|
Member State reference number |
RGE 37/2011 |
||||
|
Name of the Region (NUTS) |
COMUNIDAD VALENCIANA Mixed |
||||
|
Granting authority |
|
||||
|
Title of the aid measure |
Subvención en materia de Calidad Avícola y Alimentación Animal |
||||
|
National legal basis (Reference to the relevant national official publication) |
Resolución de 20 de julio de 2011, de la consellera de Agricultura, Pesca, Alimentación y Agua, por la que se concede una subvención en materia de Calidad Avícola y Alimentación Animal de la Comunidad Valenciana |
||||
|
Type of measure |
Scheme |
||||
|
Amendment of an existing aid measure |
— |
||||
|
Duration |
20.7.2011-1.11.2011 |
||||
|
Economic sector(s) concerned |
Raising of poultry |
||||
|
Type of beneficiary |
SME |
||||
|
Annual overall amount of the budget planned under the scheme |
EUR 0,02 (in millions) |
||||
|
For guarantees |
— |
||||
|
Aid Instrument (Article 5) |
Direct grant |
||||
|
Reference to the Commission Decision |
— |
||||
|
If co-financed by Community funds |
— |
||||
|
Objectives |
Maximum aid intensity in % or Maximum aid amount in national currency |
SME-bonuses in % |
|||
|
Aid for innovation advisory services and for innovation support services (Art. 36) |
15 000 EUR |
— |
|||
Web link to the full text of the aid measure:
http://www.agricultura.gva.es/web/c/document_library/get_file?uuid=9e450d80-6b7c-4da3-ae39-a2f434f1d2e4&groupId=16
|
Reference number of the State Aid |
SA.33660 (11/X) |
||||
|
Member State |
Italy |
||||
|
Member State reference number |
— |
||||
|
Name of the Region (NUTS) |
FRIULI-VENEZIA GIULIA Mixed |
||||
|
Granting authority |
|
||||
|
Title of the aid measure |
AVVISO DI PROCEDURA PUBBLICA PER LA SELEZIONE DI PROGETTI FORMATIVI AZIENDALI (Legge 236/93 art. 9 commi 3 e 7) — stanziamenti nazionali 2011 |
||||
|
National legal basis (Reference to the relevant national official publication) |
LEGGE 236 DEL 19 LUGLIO 1993 art. 9 commi 3 e 7 Decreto n. 2803/LAVFOR.FP/2011 del 1.8.2011 |
||||
|
Type of measure |
Scheme |
||||
|
Amendment of an existing aid measure |
— |
||||
|
Duration |
25.8.2011-31.12.2013 |
||||
|
Economic sector(s) concerned |
All economic sectors eligible to receive aid |
||||
|
Type of beneficiary |
SME,large enterprise |
||||
|
Annual overall amount of the budget planned under the scheme |
EUR 2,75 (in millions) |
||||
|
For guarantees |
— |
||||
|
Aid Instrument (Article 5) |
Direct grant |
||||
|
Reference to the Commission Decision |
— |
||||
|
If co-financed by Community funds |
— |
||||
|
Objectives |
Maximum aid intensity in % or Maximum aid amount in national currency |
SME-bonuses in % |
|||
|
Specific training (Art. 38(1)) |
25 % |
20 % |
|||
|
General training (Art. 38(2)) |
60 % |
20 % |
|||
Web link to the full text of the aid measure:
http://arpebur.regione.fvg.it/newbur/visionaBUR?bnum=2011/08/10/32
bollettino ufficiale della regione numero 32 del 10 agosto 2011
|
Reference number of the State Aid |
SA.33666 (11/X) |
|||||||
|
Member State |
Slovakia |
|||||||
|
Member State reference number |
— |
|||||||
|
Name of the Region (NUTS) |
Západné Slovensko, Stredné Slovensko, Východné Slovensko Article 107(3)(a) |
|||||||
|
Granting authority |
|
|||||||
|
Title of the aid measure |
Schéma štátnej pomoci na podporu zavádzania inovatívnych a vyspelých technológií v priemysle a v službách s relevanciou k Lokálnym stratégiám komplexného prístupu |
|||||||
|
National legal basis (Reference to the relevant national official publication) |
|
|||||||
|
Type of measure |
Scheme |
|||||||
|
Amendment of an existing aid measure |
— |
|||||||
|
Duration |
13.9.2011-31.12.2013 |
|||||||
|
Economic sector(s) concerned |
All economic sectors eligible to receive aid |
|||||||
|
Type of beneficiary |
SME,large enterprise |
|||||||
|
Annual overall amount of the budget planned under the scheme |
EUR 5,49 (in millions) |
|||||||
|
For guarantees |
— |
|||||||
|
Aid Instrument (Article 5) |
Direct grant |
|||||||
|
Reference to the Commission Decision |
— |
|||||||
|
If co-financed by Community funds |
ERDF — Operačný program Konkurencieschopnosť a hospodársky rast schválený rozhodnutím Komisie Európskych spoločenstiev č. K (2007)5940 zo dňa 28.11.2007, upravené rozhodnutím Komisie Európskych spoločenstiev č. K (2010)6168 zo dňa 15.9.2010, kód CCI 2007SK161PO002. — EUR 14,00 (in millions) |
|||||||
|
Objectives |
Maximum aid intensity in % or Maximum aid amount in national currency |
SME-bonuses in % |
||||||
|
Scheme |
50 % |
20 % |
||||||
Web link to the full text of the aid measure:
https://portal.justice.sk/PortalApp/ObchodnyVestnik/Web/Stiahnut.aspx?IdOvSubor=1723
|
Reference number of the State Aid |
SA.33668 (11/X) |
||||||
|
Member State |
Denmark |
||||||
|
Member State reference number |
— |
||||||
|
Name of the Region (NUTS) |
DANMARK Article 107(3)(c) |
||||||
|
Granting authority |
|
||||||
|
Title of the aid measure |
Forsknings- og Innovation platforme (Strategic Platforms for Innovation and Research) |
||||||
|
National legal basis (Reference to the relevant national official publication) |
Lov om forskningsrådgivning mv. jf. lovbekendtgørelse nr. 1064 af 6. september 2010 og Lov om teknologi og innovation, jf. lovbekendtgørelse nr. 835 af 13. august 2008 |
||||||
|
Type of measure |
Scheme |
||||||
|
Amendment of an existing aid measure |
— |
||||||
|
Duration |
1.11.2011-31.12.2016 |
||||||
|
Economic sector(s) concerned |
All economic sectors eligible to receive aid |
||||||
|
Type of beneficiary |
SME,large enterprise |
||||||
|
Annual overall amount of the budget planned under the scheme |
DKK 75,00 (in millions) |
||||||
|
For guarantees |
— |
||||||
|
Aid Instrument (Article 5) |
Direct grant |
||||||
|
Reference to the Commission Decision |
— |
||||||
|
If co-financed by Community funds |
— |
||||||
|
Objectives |
Maximum aid intensity in % or Maximum aid amount in national currency |
SME-bonuses in % |
|||||
|
Fundamental research (Art. 31(2)(a)) |
60 % |
— |
|||||
|
Industrial research (Art. 31(2)(b)) |
50 % |
60 % |
|||||
Web link to the full text of the aid measure:
http://www.fi.dk/dsf/spir
|
18.11.2011 |
EN |
Official Journal of the European Union |
C 338/72 |
Information communicated by Member States regarding State aid granted under Commission Regulation (EC) No 800/2008 declaring certain categories of aid compatible with the common market in application of Articles 87 and 88 of the Treaty (General Block Exemption Regulation)
(Text with EEA relevance)
2011/C 338/05
|
Reference number of the State Aid |
SA.33661 (11/X) |
||||
|
Member State |
Italy |
||||
|
Member State reference number |
— |
||||
|
Name of the Region (NUTS) |
VALLE D'AOSTA Mixed |
||||
|
Granting authority |
|
||||
|
Title of the aid measure |
BANDO PER LA CREAZIONE E LO SVILUPPO DI UNITA' DI RICERCA |
||||
|
National legal basis (Reference to the relevant national official publication) |
Deliberazione della Giunta regionale n. 1988 del 26 agosto 2011 |
||||
|
Type of measure |
Scheme |
||||
|
Amendment of an existing aid measure |
— |
||||
|
Duration |
26.8.2011 - 31.12.2013 |
||||
|
Economic sector(s) concerned |
All economic sectors eligible to receive aid |
||||
|
Type of beneficiary |
SME,large enterprise |
||||
|
Annual overall amount of the budget planned under the scheme |
EUR 0,52 (in millions) |
||||
|
For guarantees |
— |
||||
|
Aid Instrument (Article 5) |
Direct grant |
||||
|
Reference to the Commission Decision |
— |
||||
|
If co-financed by Community funds |
Decisione C (2007) 3867 del 7 agosto 2007 - EUR 0,42 (in millions) |
||||
|
Objectives |
Maximum aid intensity in % or Maximum aid amount in national currency |
SME-bonuses in % |
|||
|
Aid for technical feasibility studies (Art. 32) |
75 % |
— |
|||
|
Industrial research (Art. 31(2)(b)) |
50 % |
20 % |
|||
|
Experimental development (Art. 31(2)(c)) |
25 % |
20 % |
|||
Web link to the full text of the aid measure:
http://www.regione.vda.it/europa/por_competitivita_regionale/programma/interventi_in_corso/bando_unita_di_ricerca_i.asp
|
Reference number of the State Aid |
SA.33695 (11/X) |
||||
|
Member State |
Netherlands |
||||
|
Member State reference number |
NLD |
||||
|
Name of the Region (NUTS) |
OVERIJSSEL Non-assisted areas |
||||
|
Granting authority |
|
||||
|
Title of the aid measure |
Subsidieregeling Haalbaarheidstudies en energieonderzoeken |
||||
|
National legal basis (Reference to the relevant national official publication) |
Provinciaal blad nr. 2011/0159130 paragraaf 8.9 Uitvoeringsbesluit subsidies Overijssel (Ubs) 2011 |
||||
|
Type of measure |
Scheme |
||||
|
Amendment of an existing aid measure |
— |
||||
|
Duration |
1.9.2011 - 1.1.2013 |
||||
|
Economic sector(s) concerned |
All economic sectors eligible to receive aid |
||||
|
Type of beneficiary |
SME,large enterprise |
||||
|
Annual overall amount of the budget planned under the scheme |
EUR 0,55 (in millions) |
||||
|
For guarantees |
— |
||||
|
Aid Instrument (Article 5) |
Direct grant |
||||
|
Reference to the Commission Decision |
— |
||||
|
If co-financed by Community funds |
— |
||||
|
Objectives |
Maximum aid intensity in % or Maximum aid amount in national currency |
SME-bonuses in % |
|||
|
Aid for environmental studies (Art.24) |
50 % |
0 % |
|||
Web link to the full text of the aid measure:
|
|
http://www.overijssel.nl/actueel/provinciale-bladen/provinciale-bladen-3/ |
|
|
www.overijssel.nl, actueel, provinciale bladen 2011 |
|
|
http://www.overijssel.nl/loket/provinciale/uitvoeringsbesluit_subsidies_overijssel_2011#H49807_0_9_ |
|
|
www.overijssel.nl, loket, subsidies, wet- en regelgeving, Ubs 2011, paragraaf 8.9 |
|
Reference number of the State Aid |
SA.33698 (11/X) |
|||||
|
Member State |
Italy |
|||||
|
Member State reference number |
— |
|||||
|
Name of the Region (NUTS) |
TRENTO Non-assisted areas |
|||||
|
Granting authority |
|
|||||
|
Title of the aid measure |
Misure di sostegno per l'attivazione di nuovi impianti per il trattamento della frazione organica dei rifiuti derivanti dalla raccolta differenziata |
|||||
|
National legal basis (Reference to the relevant national official publication) |
Deliberazione della Giunta della Provincia autonoma di Trento n. 1869 del 2 settembre 2011 Bollettino ufficiale della Regione Trentino Alto Adige n. 37 del 13 settembre 2011 |
|||||
|
Type of measure |
Scheme |
|||||
|
Amendment of an existing aid measure |
— |
|||||
|
Duration |
13.9.2011 - 31.12.2013 |
|||||
|
Economic sector(s) concerned |
All economic sectors eligible to receive aid |
|||||
|
Type of beneficiary |
SME,large enterprise |
|||||
|
Annual overall amount of the budget planned under the scheme |
EUR 6,20 (in millions) |
|||||
|
For guarantees |
— |
|||||
|
Aid Instrument (Article 5) |
Direct grant |
|||||
|
Reference to the Commission Decision |
— |
|||||
|
If co-financed by Community funds |
— |
|||||
|
Objectives |
Maximum aid intensity in % or Maximum aid amount in national currency |
SME-bonuses in % |
||||
|
Investment aid enabling undertakings to go beyond Community standards for environmental protection or increase the level of environmental protection in the absence of Community standards (Art. 18) (Reference to the relevant standards: direttiva 2008/1/CE — direttiva 2008/98/CE) |
35 % |
20 % |
||||
Web link to the full text of the aid measure:
http://www.valutazioneambientale.provincia.tn.it/
|
Reference number of the State Aid |
SA.33701 (11/X) |
||||
|
Member State |
Estonia |
||||
|
Member State reference number |
— |
||||
|
Name of the Region (NUTS) |
Estonia Article 107(3)(a) |
||||
|
Granting authority |
|
||||
|
Title of the aid measure |
Meetme „Materjalitehnoloogia teadus- ja arendustegevuse toetamine” tingimused |
||||
|
National legal basis (Reference to the relevant national official publication) |
Haridus- ja teadusministri 16.9.2011 määrus nr 46 Meetme „Materjalitehnoloogia teadus- ja arendustegevuse toetamine” tingimused RT I, 20.9.2011, 10 |
||||
|
Type of measure |
Scheme |
||||
|
Amendment of an existing aid measure |
— |
||||
|
Duration |
23.9.2011 - 31.12.2013 |
||||
|
Economic sector(s) concerned |
All economic sectors eligible to receive aid |
||||
|
Type of beneficiary |
SME,large enterprise |
||||
|
Annual overall amount of the budget planned under the scheme |
EUR 3,13 (in millions) |
||||
|
For guarantees |
— |
||||
|
Aid Instrument (Article 5) |
Direct grant |
||||
|
Reference to the Commission Decision |
— |
||||
|
If co-financed by Community funds |
ERDF - EUR 2,80 (in millions) |
||||
|
Objectives |
Maximum aid intensity in % or Maximum aid amount in national currency |
SME-bonuses in % |
|||
|
Fundamental research (Art. 31(2)(a)) |
95 % |
— |
|||
|
Industrial research (Art. 31(2)(b)) |
50 % |
10 % |
|||
Web link to the full text of the aid measure:
https://www.riigiteataja.ee/akt/120092011010